OSDN Git Service
Julian Wiedmann [Wed, 11 Jul 2018 15:42:45 +0000 (17:42 +0200)]
s390/qeth: add a L3 xmit wrapper
In preparation for future work, move the high-level xmit work into a
separate wrapper. This matches the L2 xmit code.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Wed, 11 Jul 2018 15:42:44 +0000 (17:42 +0200)]
s390/qeth: increase GSO max size for eligible L3 devices
When a L3 device doesn't offer TSO, allow the stack to build full-size
GSO skbs.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Wed, 11 Jul 2018 15:42:43 +0000 (17:42 +0200)]
s390/qeth: clean up exported symbols
Remove some redundant EXPORTs. While at it, also move some L2-only
prototypes into the proper header file.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Wed, 11 Jul 2018 15:42:42 +0000 (17:42 +0200)]
s390/qeth: consolidate ccwgroup driver definition
Reshuffle the code a bit so that everything is in one place.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Wed, 11 Jul 2018 15:42:41 +0000 (17:42 +0200)]
s390/qeth: clean up Output Queue selection
Consolidate duplicated code, fix the misuse of RTN_UNSPEC and simplify
the handling of non-unicast traffic on IQD devices.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Wed, 11 Jul 2018 15:42:40 +0000 (17:42 +0200)]
s390/qeth: fine-tune RX modesetting
Changing a device's address lists (or its promisc mode) already triggers
an RX modeset, there's no need to do it manually from the L2 driver's
ndo_vlan_rx_kill_vid() hook.
Also when setting a device online, dev_open() already calls
dev_set_rx_mode(). So a manual modeset is only necessary from the
recovery path.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Wed, 11 Jul 2018 15:42:39 +0000 (17:42 +0200)]
s390/qeth: remove unused buffer->aob pointer
Except for tracing, the pointer is not used.
At the same time, accessing it from qeth_qdio_output_handler() is racy:
whenever qeth_qdio_cq_handler() gets control, its call to
qeth_qdio_handle_aob() frees the AOB.
So the AOB pointer that qeth_qdio_output_handler() stores into 'buffer'
can go stale at any time, and trigger a use-after-free.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Wed, 11 Jul 2018 15:42:38 +0000 (17:42 +0200)]
s390/qeth: various buffer management cleanups
Use the new qeth_scrub_qdio_buffer() helper, remove an extra parameter
from qeth_clear_output_buffer(), init the bufstates.user field just once
(in qeth_flush_buffers()) and remove some noisy trace messages.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Dangaard Brouer [Wed, 11 Jul 2018 15:01:20 +0000 (17:01 +0200)]
net: ipv4: fix listify ip_rcv_finish in case of forwarding
In commit
5fa12739a53d ("net: ipv4: listify ip_rcv_finish") calling
dst_input(skb) was split-out. The ip_sublist_rcv_finish() just calls
dst_input(skb) in a loop.
The problem is that ip_sublist_rcv_finish() forgot to remove the SKB
from the list before invoking dst_input(). Further more we need to
clear skb->next as other parts of the network stack use another kind
of SKB lists for xmit_more (see dev_hard_start_xmit).
A crash occurs if e.g. dst_input() invoke ip_forward(), which calls
dst_output()/ip_output() that eventually calls __dev_queue_xmit() +
sch_direct_xmit(), and a crash occurs in validate_xmit_skb_list().
This patch only fixes the crash, but there is a huge potential for
a performance boost if we can pass an SKB-list through to ip_forward.
Fixes:
5fa12739a53d ("net: ipv4: listify ip_rcv_finish")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Wed, 11 Jul 2018 12:29:53 +0000 (14:29 +0200)]
nfp: avoid using getnstimeofday64()
getnstimeofday64 is deprecated in favor of the ktime_get() family of
functions. The direct replacement would be ktime_get_real_ts64(),
but I'm picking the basic ktime_get() instead:
- using a ktime_t simplifies the code compared to timespec64
- using monotonic time instead of real time avoids issues caused
by a concurrent settimeofday() or during a leap second adjustment.
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Wed, 11 Jul 2018 12:29:52 +0000 (14:29 +0200)]
liquidio: use ktime_get_real_ts64() instead of getnstimeofday64()
The two do the same thing, but we want to have a consistent
naming in the kernel.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 12 Jul 2018 21:54:12 +0000 (14:54 -0700)]
Merge branch 'net-sched-act_skbedit-lockless-data-path'
Davide Caratti says:
====================
net/sched: act_skbedit: lockless data path
the data path of act_skbedit can be faster if we avoid using spinlocks:
- patch 1 converts act_skbedit statistics to use per-cpu counters
- patch 2 lets act_skbedit use RCU to read/update its configuration
test procedure (using pktgen from https://github.com/netoptimizer):
# ip link add name eth1 type dummy
# ip link set dev eth1 up
# tc qdisc add dev eth1 clsact
# tc filter add dev eth1 egress matchall action skbedit priority c1a0:c1a0
# for c in 1 2 4 ; do
> ./pktgen_bench_xmit_mode_queue_xmit.sh -v -s 64 -t $c -n
5000000 -i eth1
> done
test results (avg. pps/thread)
$c | before patch | after patch | improvement
----+--------------+--------------+------------
1 |
3917464 ± 3% |
4000458 ± 3% | irrelevant
2 |
3455367 ± 4% |
3953076 ± 1% | +14%
4 |
2496594 ± 2% |
3801123 ± 3% | +52%
v2: rebased on latest net-next
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Davide Caratti [Wed, 11 Jul 2018 14:04:50 +0000 (16:04 +0200)]
net/sched: act_skbedit: don't use spinlock in the data path
use RCU instead of spin_{,un}lock_bh, to protect concurrent read/write on
act_skbedit configuration. This reduces the effects of contention in the
data path, in case multiple readers are present.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Davide Caratti [Wed, 11 Jul 2018 14:04:49 +0000 (16:04 +0200)]
net/sched: skbedit: use per-cpu counters
use per-CPU counters, instead of sharing a single set of stats with all
cores: this removes the need of spinlocks when stats are read/updated.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Wed, 11 Jul 2018 10:16:12 +0000 (12:16 +0200)]
tcp: use monotonic timestamps for PAWS
Using get_seconds() for timestamps is deprecated since it can lead
to overflows on 32-bit systems. While the interface generally doesn't
overflow until year 2106, the specific implementation of the TCP PAWS
algorithm breaks in 2038 when the intermediate signed 32-bit timestamps
overflow.
A related problem is that the local timestamps in CLOCK_REALTIME form
lead to unexpected behavior when settimeofday is called to set the system
clock backwards or forwards by more than 24 days.
While the first problem could be solved by using an overflow-safe method
of comparing the timestamps, a nicer solution is to use a monotonic
clocksource with ktime_get_seconds() that simply doesn't overflow (at
least not until 136 years after boot) and that doesn't change during
settimeofday().
To make 32-bit and 64-bit architectures behave the same way here, and
also save a few bytes in the tcp_options_received structure, I'm changing
the type to a 32-bit integer, which is now safe on all architectures.
Finally, the ts_recent_stamp field also (confusingly) gets used to store
a jiffies value in tcp_synq_overflow()/tcp_synq_no_recent_overflow().
This is currently safe, but changing the type to 32-bit requires
some small changes there to keep it working.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vakul Garg [Wed, 11 Jul 2018 09:02:20 +0000 (14:32 +0530)]
net/tls: Use aead_request_alloc/free for request alloc/free
Instead of kzalloc/free for aead_request allocation and free, use
functions aead_request_alloc(), aead_request_free(). It ensures that
any sensitive crypto material held in crypto transforms is securely
erased from memory.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pieter Jansen van Vuuren [Wed, 11 Jul 2018 01:22:31 +0000 (18:22 -0700)]
tc-testing: add geneve options in tunnel_key unit tests
Extend tc tunnel_key action unit tests with geneve options. Tests
include testing single and multiple geneve options, as well as
testing geneve options that are expected to fail.
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Acked-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 12 Jul 2018 07:03:31 +0000 (00:03 -0700)]
Merge branch 'be2net-small-structures-clean-up'
Ivan Vecera says:
====================
be2net: small structures clean-up
The series:
- removes unused / unneccessary fields in several be2net structures
- re-order fields in some structures to eliminate holes, cache-lines
crosses
- as result reduces size of main struct be_adapter by 4kB
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Vecera [Tue, 10 Jul 2018 20:59:48 +0000 (22:59 +0200)]
be2net: move rss_flags field in rss_info to ensure proper alignment
The current position of .rss_flags field in struct rss_info causes
that fields .rsstable and .rssqueue (both 128 bytes long) crosses
cache-line boundaries. Moving it at the end properly align all fields.
Before patch:
struct rss_info {
u64 rss_flags; /* 0 8 */
u8 rsstable[128]; /* 8 128 */
/* --- cacheline 2 boundary (128 bytes) was 8 bytes ago --- */
u8 rss_queue[128]; /* 136 128 */
/* --- cacheline 4 boundary (256 bytes) was 8 bytes ago --- */
u8 rss_hkey[40]; /* 264 40 */
};
After patch:
struct rss_info {
u8 rsstable[128]; /* 0 128 */
/* --- cacheline 2 boundary (128 bytes) --- */
u8 rss_queue[128]; /* 128 128 */
/* --- cacheline 4 boundary (256 bytes) --- */
u8 rss_hkey[40]; /* 256 40 */
u64 rss_flags; /* 296 8 */
};
Signed-off-by: Ivan Vecera <cera@cera.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Vecera [Tue, 10 Jul 2018 20:59:47 +0000 (22:59 +0200)]
be2net: re-order fields in be_error_recovert to avoid hole
- Unionize two u8 fields where only one of them is used depending on NIC
chipset.
- Move recovery_supported field after that union
These changes eliminate 7-bytes hole in the struct and makes it smaller
by 8 bytes.
Signed-off-by: Ivan Vecera <cera@cera.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Vecera [Tue, 10 Jul 2018 20:59:46 +0000 (22:59 +0200)]
be2net: remove unused tx_jiffies field from be_tx_stats
Signed-off-by: Ivan Vecera <cera@cera.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Vecera [Tue, 10 Jul 2018 20:59:45 +0000 (22:59 +0200)]
be2net: move txcp field in be_tx_obj to eliminate holes in the struct
Before patch:
struct be_tx_obj {
u32 db_offset; /* 0 4 */
/* XXX 4 bytes hole, try to pack */
struct be_queue_info q; /* 8 56 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct be_queue_info cq; /* 64 56 */
struct be_tx_compl_info txcp; /* 120 4 */
/* XXX 4 bytes hole, try to pack */
/* --- cacheline 2 boundary (128 bytes) --- */
struct sk_buff * sent_skb_list[2048]; /* 128 16384 */
...
}:
After patch:
struct be_tx_obj {
u32 db_offset; /* 0 4 */
struct be_tx_compl_info txcp; /* 4 4 */
struct be_queue_info q; /* 8 56 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct be_queue_info cq; /* 64 56 */
struct sk_buff * sent_skb_list[2048]; /* 120 16384 */
...
};
Signed-off-by: Ivan Vecera <cera@cera.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Vecera [Tue, 10 Jul 2018 20:59:44 +0000 (22:59 +0200)]
be2net: reorder fields in be_eq_obj structure
Re-order fields in struct be_eq_obj to ensure that .napi field begins
at start of cache-line. Also the .adapter field is moved to the first
cache-line next to .q field and 3 fields (idx,msi_idx,spurious_intr)
and the 4-bytes hole to 3rd cache-line.
Signed-off-by: Ivan Vecera <cera@cera.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Vecera [Tue, 10 Jul 2018 20:59:43 +0000 (22:59 +0200)]
be2net: remove desc field from be_eq_obj
The event queue description (be_eq_obj.desc) field is used only to format
string for IRQ name and it is not really needed to hold this value.
Remove it and use local variable to format string for IRQ name.
Signed-off-by: Ivan Vecera <cera@cera.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Vecera [Tue, 10 Jul 2018 20:59:42 +0000 (22:59 +0200)]
be2net: remove unused old custom busy-poll fields
The commit
fb6113e688e0 ("be2net: get rid of custom busy poll code")
replaced custom busy-poll code by the generic one but left several
macros and fields in struct be_eq_obj that are currently unused.
Remove this stuff.
Fixes:
fb6113e688e0 ("be2net: get rid of custom busy poll code")
Signed-off-by: Ivan Vecera <cera@cera.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Vecera [Tue, 10 Jul 2018 20:59:41 +0000 (22:59 +0200)]
be2net: remove unused old AIC info
The commit
2632bafd74ae ("be2net: fix adaptive interrupt coalescing")
introduced a separate struct be_aic_obj to hold AIC information but
unfortunately left the old stuff in be_eq_obj. So remove it.
Fixes:
2632bafd74ae ("be2net: fix adaptive interrupt coalescing")
Signed-off-by: Ivan Vecera <cera@cera.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Khoronzhuk [Tue, 10 Jul 2018 13:04:04 +0000 (16:04 +0300)]
net: ethernet: ti: cpts: break cycle once late ts is matched
The late ts queue can contain a bunch of skbs while hi rate testing,
no need to check all of them if timestamp is already matched.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Tue, 10 Jul 2018 12:44:26 +0000 (14:44 +0200)]
selftests: forwarding: mirror_gre_nh: Unset rp_filter on host VRF
The mirrored packets arrive at $h3 encapsulated in GRE/IPv4, with IP
address from 192.0.2.128/28 network. However the interface is configured
as a member of 192.0.2.160/28 and there's no route directing traffic
from the former network through that interface. Correspondingly, the RP
filter on the VRF rejects it.
Therefore turn off the VRF's RP filter.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 12 Jul 2018 06:10:20 +0000 (23:10 -0700)]
Merge branch 'mlxsw-ERSPAN-Take-LACP-state-into-consideration'
Ido Schimmel says:
====================
mlxsw: ERSPAN: Take LACP state into consideration
Petr says:
When offloading mirror-to-gretap, mlxsw needs to preroute the path that
the encapsulated packet will take. That path may include a LAG device
above a front panel port. So far, mlxsw resolved the path to the first
up front panel slave of the LAG interface, but that only reflects
administrative state of the port. It neglects to consider whether the
port actually has a carrier, and what the LACP state is. This patch set
aims to address these problems.
Patch #1 publishes team_port_get_rcu().
Then in patch #2, a new function is introduced,
mlxsw_sp_port_dev_check(). That returns, for a given netdevice that is a
slave of a LAG device, whether that device is "txable", i.e. whether the
LAG master would send traffic through it. Since there's no good place to
put LAG-wide helpers, introduce a new header include/net/lag.h.
Finally in patch #3, fix the slave selection logic to take into
consideration whether a given slave has a carrier and whether it is
txable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Tue, 10 Jul 2018 07:02:59 +0000 (10:02 +0300)]
mlxsw: spectrum_span: Change LAG lower selection
When offloading mirror-to-gretap, mlxsw needs to preroute the path that
the encapsulated packet will take. That path may include a LAG device
above a front panel port. So far, mlxsw resolved the path to the first
up front panel slave of the LAG interface, but that only reflects
administrative state of the port. It neglects to consider whether the
port actually has a carrier, and what the LACP state is.
So instead of checking upness of the device, check carrier state and
txability.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Tue, 10 Jul 2018 07:02:58 +0000 (10:02 +0300)]
net: Add lag.h, net_lag_port_dev_txable()
LAG devices (team or bond) recognize for each one of their slave devices
whether LAG traffic is going to be sent through that device. Bond calls
such devices "active", team calls them "txable". When this state
changes, a NETDEV_CHANGELOWERSTATE notification is distributed, together
with a netdev_notifier_changelowerstate_info structure that for LAG
devices includes a tx_enabled flag that refers to the new state. The
notification thus makes it possible to react to the changes in txability
in drivers.
However there's no way to query txability from the outside on demand.
That is problematic namely for mlxsw, which when resolving ERSPAN packet
path, may encounter a LAG device, and needs to determine which of the
slaves it should choose.
To that end, introduce a new function, net_lag_port_dev_txable(), which
determines whether a given slave device is "active" or
"txable" (depending on the flavor of the LAG device). That function then
dispatches to per-LAG-flavor helpers, bond_is_active_slave_dev() resp.
team_port_dev_txable().
Because there currently is no good place where net_lag_port_dev_txable()
should be added, introduce a new header file, lag.h, which should from
now on hold any logic common to both team and bond. (But keep
netif_is_lag_master() together with the rest of netif_is_*_master()
functions).
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Tue, 10 Jul 2018 07:02:57 +0000 (10:02 +0300)]
team: Publish team_port_get_rcu()
A follow-up patch adds a new entry point, team_port_dev_txable(). Making
it an ordinary exported function would mean that any module that may
need the service in one of the supported configurations also
unconditionally needs to pull in the team module, whether or not the
user actually intends to create team interfaces.
To prevent that, team_port_dev_txable() is defined in if_team.h, and
therefore all dependencies of that function also need to be
publicly-visible.
Therefore move team_port_get_rcu() from team.c to if_team.h.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Travis Brown [Tue, 10 Jul 2018 00:35:01 +0000 (00:35 +0000)]
macvlan: Change status when lower device goes down
Today macvlan ignores the notification when a lower device goes
administratively down, preventing the lack of connectivity from
bubbling up.
Processing NETDEV_DOWN results in a macvlan state of LOWERLAYERDOWN
with NO-CARRIER which should be easy to interpret in userspace.
2: lower: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
3: macvlan@lower: <NO-CARRIER,BROADCAST,MULTICAST,UP,M-DOWN> mtu 1500 qdisc noqueue state LOWERLAYERDOWN mode DEFAULT group default qlen 1000
Signed-off-by: Suresh Krishnan <skrishnan@arista.com>
Signed-off-by: Travis Brown <travisb@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 12 Jul 2018 06:06:14 +0000 (23:06 -0700)]
Merge branch 'tipc-make-link-protocol-more-resilient'
Jon Maloy says:
====================
tipc: make link protocol more resilient
These two commits make the link ptotocol more resilient to
infrastructures with frequent packet duplication and long delays.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Mon, 9 Jul 2018 23:07:36 +0000 (01:07 +0200)]
tipc: check session number before accepting link protocol messages
In some virtual environments we observe a significant higher number of
packet reordering and delays than we have been used to traditionally.
This makes it necessary with stricter checks on incoming link protocol
messages' session number, which until now only has been validated for
RESET messages.
Since the other two message types, ACTIVATE and STATE messages also
carry this number, it is easy to extend the validation check to those
messages.
We also introduce a flag indicating if a link has a valid peer session
number or not. This eliminates the mixing of 32- and 16-bit arithmethics
we are currently using to achieve this.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Mon, 9 Jul 2018 23:07:35 +0000 (01:07 +0200)]
tipc: add sequence number check for link STATE messages
Some switch infrastructures produce huge amounts of packet duplicates.
This becomes a problem if those messages are STATE/NACK protocol
messages, causing unnecessary retransmissions of already accepted
packets.
We now introduce a unique sequence number per STATE protocol message
so that duplicates can be identified and ignored. This will also be
useful when tracing such cases, and to avert replay attacks when TIPC
is encrypted.
For compatibility reasons we have to introduce a new capability flag
TIPC_LINK_PROTO_SEQNO to handle this new feature.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 12 Jul 2018 06:03:32 +0000 (23:03 -0700)]
Merge branch '10GbE' of git://git./linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
L2 Fwd Offload & 10GbE Intel Driver Updates 2018-07-09
This patch series is meant to allow support for the L2 forward offload, aka
MACVLAN offload without the need for using ndo_select_queue.
The existing solution currently requires that we use ndo_select_queue in
the transmit path if we want to associate specific Tx queues with a given
MACVLAN interface. In order to get away from this we need to repurpose the
tc_to_txq array and XPS pointer for the MACVLAN interface and use those as
a means of accessing the queues on the lower device. As a result we cannot
offload a device that is configured as multiqueue, however it doesn't
really make sense to configure a macvlan interfaced as being multiqueue
anyway since it doesn't really have a qdisc of its own in the first place.
The big changes in this set are:
Allow lower device to update tc_to_txq and XPS map of offloaded MACVLAN
Disable XPS for single queue devices
Replace accel_priv with sb_dev in ndo_select_queue
Add sb_dev parameter to fallback function for ndo_select_queue
Consolidated ndo_select_queue functions that appeared to be duplicates
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Deepti Raghavan [Mon, 9 Jul 2018 17:53:39 +0000 (17:53 +0000)]
tcp: expose both send and receive intervals for rate sample
Congestion control algorithms, which access the rate sample
through the tcp_cong_control function, only have access to the maximum
of the send and receive interval, for cases where the acknowledgment
rate may be inaccurate due to ACK compression or decimation. Algorithms
may want to use send rates and receive rates as separate signals.
Signed-off-by: Deepti Raghavan <deeptir@mit.edu>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov [Mon, 9 Jul 2018 17:26:47 +0000 (20:26 +0300)]
net: sched: fix unprotected access to rcu cookie pointer
Fix action attribute size calculation function to take rcu read lock and
access act_cookie pointer with rcu dereference.
Fixes:
eec94fdb0480 ("net: sched: use rcu for action cookie update")
Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 12 Jul 2018 05:59:39 +0000 (22:59 -0700)]
Merge branch 'cxgb4-move-stats-fetched-from-firmware-to-debugfs'
Rahul Lakkireddy says:
====================
cxgb4: move stats fetched from firmware to debugfs
Some stats are fetched via slow firmware mailbox, which can cause
packet drops under heavy load. So, this series removes these stats
from ethtool -S and expose them via debugfs.
Patch 1 removes stats fetched via firmware from ethtool -S.
Patch 2 exposes stats removed in Patch 1 via debugfs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Lakkireddy [Mon, 9 Jul 2018 16:12:47 +0000 (21:42 +0530)]
cxgb4: expose stats fetched from firmware via debugfs
Expose stats obtained from firmware via debugfs. These stats can't
be part of ethtool -S because the slow firmware mailbox can cause
packet drops under heavy load.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Lakkireddy [Mon, 9 Jul 2018 16:12:46 +0000 (21:42 +0530)]
cxgb4: remove stats fetched from firmware
When running ethtool -S, some stats are requested from firmware.
Since getting these stats via firmware mailbox is slow, some packets
get dropped under heavy load while running ethtool -S.
So, remove these stats from ethtool -S.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Tenart [Mon, 9 Jul 2018 15:00:43 +0000 (17:00 +0200)]
net: mvpp2: explicitly include linux/interrupt.h
The Marvell PPv2 driver uses interrupts and tasklet but does not
explicitly include linux/interrupt.h, relying on implicit includes. This
one particularly is included by chance after a long unlogical chain of
inclusions. Fix this so we do not get future build breaks.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jan Dakinevich [Mon, 9 Jul 2018 13:51:19 +0000 (16:51 +0300)]
cnic: use kvzalloc to allocate memory for csk_tbl
Size of csk_tbl is about 58K, which means 3rd order page allocation.
kvzalloc provides a fallback if no high order memory is available.
Signed-off-by: Jan Dakinevich <jan.dakinevich@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Mon, 9 Jul 2018 12:23:13 +0000 (13:23 +0100)]
wimax/i2400m: remove redundant variables ack_status, bcf and protocol
Variables ack_status, bcf and protocol are being assigned but are
never used hence they are redundant and can be removed.
Also declare ack_type as unsigned int rather than unsigned to clean
up a checkpatch warning.
Cleans up clang warnings:
warning: variable 'ack_status' set but not used [-Wunused-but-set-variable]
warning: variable 'bcf' set but not used [-Wunused-but-set-variable]
warning: variable 'protocol' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov [Mon, 9 Jul 2018 11:33:26 +0000 (14:33 +0300)]
net: sched: act_ife: fix memory leak in ife init
Free params if tcf_idr_check_alloc() returned error.
Fixes:
0190c1d452a9 ("net: sched: atomically check-allocate action")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arjun Vynipadath [Mon, 9 Jul 2018 11:22:03 +0000 (16:52 +0530)]
cxgb4: specify IQTYPE in fw_iq_cmd
congestion argument passed to t4_sge_alloc_rxq() is used
to differentiate between nic/ofld queues.
Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 12 Jul 2018 05:50:46 +0000 (22:50 -0700)]
Merge branch 'net-ipv6-addr_gen_mode-fixes'
Sabrina Dubroca says:
====================
net/ipv6: addr_gen_mode fixes
This series fixes bugs in handling of the addr_gen_mode option, mainly
related to the sysctl. A minor netlink issue was also present in the
initial commit introducing the option on a per-netdevice basis.
v2: add patch 4, requested by David Ahern during review of v1
add patch 5, missing documentation for the sysctl
patches 1, 2, 3 are unchanged
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca [Mon, 9 Jul 2018 10:25:18 +0000 (12:25 +0200)]
Documentation: ip-sysctl.txt: document addr_gen_mode
addr_gen_mode was introduced in without documentation, add it now.
Fixes:
d35a00b8e33d ("net/ipv6: allow sysctl to change link-local address generation mode")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca [Mon, 9 Jul 2018 10:25:17 +0000 (12:25 +0200)]
net/ipv6: propagate net.ipv6.conf.all.addr_gen_mode to devices
This aligns the addr_gen_mode sysctl with the expected behavior of the
"all" variant.
Fixes:
d35a00b8e33d ("net/ipv6: allow sysctl to change link-local address generation mode")
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca [Mon, 9 Jul 2018 10:25:16 +0000 (12:25 +0200)]
net/ipv6: reserve room for IFLA_INET6_ADDR_GEN_MODE
inet6_ifla6_size() is called to check how much space is needed by
inet6_fill_link_af() and inet6_fill_ifinfo(), both of which include
the IFLA_INET6_ADDR_GEN_MODE attribute. Reserve some room for it.
Fixes:
bc91b0f07ada ("ipv6: addrconf: implement address generation modes")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca [Mon, 9 Jul 2018 10:25:15 +0000 (12:25 +0200)]
net/ipv6: don't reinitialize ndev->cnf.addr_gen_mode on new inet6_dev
The value has already been copied from this netns's devconf_dflt, it
shouldn't be reset to the global kernel default.
Fixes:
d35a00b8e33d ("net/ipv6: allow sysctl to change link-local address generation mode")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca [Mon, 9 Jul 2018 10:25:14 +0000 (12:25 +0200)]
net/ipv6: fix addrconf_sysctl_addr_gen_mode
addrconf_sysctl_addr_gen_mode() has multiple problems. First, it ignores
the errors returned by proc_dointvec().
addrconf_sysctl_addr_gen_mode() calls proc_dointvec() directly, which
writes the value to memory, and then checks if it's valid and may return
EINVAL. If a bad value is given, the value displayed when reading
net.ipv6.conf.foo.addr_gen_mode next time will be invalid. In case the
value provided by the user was valid, addrconf_dev_config() won't be
called since idev->cnf.addr_gen_mode has already been updated.
Fix this in the usual way we deal with values that need to be checked
after the proc_do*() helper has returned: define a local ctl_table and
storage, call proc_dointvec() on that temporary area, then check and
store.
addrconf_sysctl_addr_gen_mode() also writes the new value to the global
ipv6_devconf_dflt, when we're writing to some netns's default, so that
new netns will inherit the value that was set by the change occuring in
any netns. That doesn't make any sense, so let's drop this assignment.
Finally, since addr_gen_mode is a __u32, switch to proc_douintvec().
Fixes:
d35a00b8e33d ("net/ipv6: allow sysctl to change link-local address generation mode")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jianbo Liu [Mon, 9 Jul 2018 02:26:20 +0000 (02:26 +0000)]
net/sched: flower: Fix null pointer dereference when run tc vlan command
Zahari issued tc vlan command without setting vlan_ethtype, which will
crash kernel. To avoid this, we must check tb[TCA_FLOWER_KEY_VLAN_ETH_TYPE]
is not null before use it.
Also we don't need to dump vlan_ethtype or cvlan_ethtype in this case.
Fixes:
d64efd0926ba ('net/sched: flower: Add supprt for matching on QinQ vlan headers')
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reported-by: Zahari Doychev <zahari.doychev@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Sun, 8 Jul 2018 17:58:55 +0000 (19:58 +0200)]
selftests: forwarding: mirror_lib: Tighten up VLAN capture
The function do_test_span_vlan_dir_ips() is used for testing whether
mirrored packets are VLAN-encapsulated. But since it only considers
VLAN encapsulation, it may end up matching unmirrored ARP traffic as
well. One consequence is a rare failure of mirror_gre_vlan_bridge_1q's
test_gretap_untagged_egress. Decreasing ping cadence in mirror_test()
makes the problem easily reproducible.
Therefore tighten up the match criterion to only count those 802.1q
packets where the next header is IP.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 11 Jul 2018 03:06:35 +0000 (20:06 -0700)]
Merge branch 'cake-qdisc'
Toke Høiland-Jørgensen says:
====================
sched: Add Common Applications Kept Enhanced (cake) qdisc
This patch series adds the CAKE qdisc, and has been split up to ease
review.
I have attempted to split out each configurable feature into its own patch.
The first commit adds the base shaper and packet scheduler, while
subsequent commits add the optional features. The full userspace API and
most data structures are included in this commit, but options not
understood in the base version will be ignored.
The result of applying the entire series is identical to the out of tree
version that have seen extensive testing in previous deployments, most
notably as an out of tree patch to OpenWrt. However, note that I have only
compile tested the individual patches; so the whole series should be
considered as a unit.
---
Changelog
v19:
- Rebase to current net-next.
- Don't rely on the value of sch->q.qlen to break loops; fixes possible
infinite loop on multi-queue devices.
- Don't overwrite NAT flag when setting flow mode.
v18:
- Rework classification logic in the diffserv case to always hash if
filter doesn't select a queue, and to run TC filters before
selecting the diffserv tin (allowing filter to influence this).
- Make sure we always call qdisc_watchdog_init() in cake_init(), so we
don't crash in cake_destroy().
v17:
- Rebase to newest net-next and move the conntrack callback to
nf_ct_hook
- Fix a compile error when NF_CONNTRACK is unset.
v16:
- Move conntrack lookup function into conntrack core and read it via
RCU so it is only active when the nf_conntrack module is loaded.
This avoids the module dependency on conntrack for NAT mode. Thanks
to Pablo for the idea.
v15:
- Handle ECN flags in ACK filter
v14:
- Handle seqno wraps and DSACKs in ACK filter
v13:
- Avoid ktime_t to scalar compares
- Add class dumping and basic stats
- Fail with ENOTSUPP when requesting NAT mode and conntrack is not
available.
- Parse all TCP options in ACK filter and make sure to only drop safe
ones. Also handle SACK ranges properly.
v12:
- Get rid of custom time typedefs. Use ktime_t for time and u64 for
duration instead.
v11:
- Fix overhead compensation calculation for GSO packets
- Change configured rate to be u64 (I ran out of bits before I ran out
of CPU when testing the effects of the above)
v10:
- Christmas tree gardening (fix variable declarations to be in reverse
line length order)
v9:
- Remove duplicated checks around kvfree() and just call it
unconditionally.
- Don't pass __GFP_NOWARN when allocating memory
- Move options in cake_dump() that are related to optional features to
later patches implementing the features.
- Support attaching filters to the qdisc and use the classification
result to select flow queue.
- Support overriding diffserv priority tin from skb->priority
v8:
- Remove inline keyword from function definitions
- Simplify ACK filter; remove the complex state handling to make the
logic easier to follow. This will potentially be a bit less efficient,
but I have not been able to measure a difference.
v7:
- Split up patch into a series to ease review.
- Constify the ACK filter.
v6:
- Fix 6in4 encapsulation checks in ACK filter code
- Checkpatch fixes
v5:
- Refactor ACK filter code and hopefully fix the safety issues
properly this time.
v4:
- Only split GSO packets if shaping at speeds <= 1Gbps
- Fix overhead calculation code to also work for GSO packets
- Don't re-implement kvzalloc()
- Remove local header include from out-of-tree build (fixes kbuild-bot
complaint).
- Several fixes to the ACK filter:
- Check pskb_may_pull() before deref of transport headers.
- Don't run ACK filter logic on split GSO packets
- Fix TCP sequence number compare to deal with wraparounds
v3:
- Use IS_REACHABLE() macro to fix compilation when sch_cake is
built-in and conntrack is a module.
- Switch the stats output to use nested netlink attributes instead
of a versioned struct.
- Remove GPL boilerplate.
- Fix array initialisation style.
v2:
- Fix kbuild test bot complaint
- Clean up the netlink ABI
- Fix checkpatch complaints
- A few tweaks to the behaviour of cake based on testing carried out
while writing the paper.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Toke Høiland-Jørgensen [Fri, 6 Jul 2018 15:37:19 +0000 (17:37 +0200)]
sch_cake: Conditionally split GSO segments
At lower bandwidths, the transmission time of a single GSO segment can add
an unacceptable amount of latency due to HOL blocking. Furthermore, with a
software shaper, any tuning mechanism employed by the kernel to control the
maximum size of GSO segments is thrown off by the artificial limit on
bandwidth. For this reason, we split GSO segments into their individual
packets iff the shaper is active and configured to a bandwidth <= 1 Gbps.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Toke Høiland-Jørgensen [Fri, 6 Jul 2018 15:37:19 +0000 (17:37 +0200)]
sch_cake: Add overhead compensation support to the rate shaper
This commit adds configurable overhead compensation support to the rate
shaper. With this feature, userspace can configure the actual bottleneck
link overhead and encapsulation mode used, which will be used by the shaper
to calculate the precise duration of each packet on the wire.
This feature is needed because CAKE is often deployed one or two hops
upstream of the actual bottleneck (which can be, e.g., inside a DSL or
cable modem). In this case, the link layer characteristics and overhead
reported by the kernel does not match the actual bottleneck. Being able to
set the actual values in use makes it possible to configure the shaper rate
much closer to the actual bottleneck rate (our experience shows it is
possible to get with 0.1% of the actual physical bottleneck rate), thus
keeping latency low without sacrificing bandwidth.
The overhead compensation has three tunables: A fixed per-packet overhead
size (which, if set, will be accounted from the IP packet header), a
minimum packet size (MPU) and a framing mode supporting either ATM or PTM
framing. We include a set of common keywords in TC to help users configure
the right parameters. If no overhead value is set, the value reported by
the kernel is used.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Toke Høiland-Jørgensen [Fri, 6 Jul 2018 15:37:19 +0000 (17:37 +0200)]
sch_cake: Add DiffServ handling
This adds support for DiffServ-based priority queueing to CAKE. If the
shaper is in use, each priority tier gets its own virtual clock, which
limits that tier's rate to a fraction of the overall shaped rate, to
discourage trying to game the priority mechanism.
CAKE defaults to a simple, three-tier mode that interprets most code points
as "best effort", but places CS1 traffic into a low-priority "bulk" tier
which is assigned 1/16 of the total rate, and a few code points indicating
latency-sensitive or control traffic (specifically TOS4, VA, EF, CS6, CS7)
into a "latency sensitive" high-priority tier, which is assigned 1/4 rate.
The other supported DiffServ modes are a 4-tier mode matching the 802.11e
precedence rules, as well as two 8-tier modes, one of which implements
strict precedence of the eight priority levels.
This commit also adds an optional DiffServ 'wash' mode, which will zero out
the DSCP fields of any packet passing through CAKE. While this can
technically be done with other mechanisms in the kernel, having the feature
available in CAKE significantly decreases configuration complexity; and the
implementation cost is low on top of the other DiffServ-handling code.
Filters and applications can set the skb->priority field to override the
DSCP-based classification into tiers. If TC_H_MAJ(skb->priority) matches
CAKE's qdisc handle, the minor number will be interpreted as a priority
tier if it is less than or equal to the number of configured priority
tiers.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Toke Høiland-Jørgensen [Fri, 6 Jul 2018 15:37:19 +0000 (17:37 +0200)]
sch_cake: Add NAT awareness to packet classifier
When CAKE is deployed on a gateway that also performs NAT (which is a
common deployment mode), the host fairness mechanism cannot distinguish
internal hosts from each other, and so fails to work correctly.
To fix this, we add an optional NAT awareness mode, which will query the
kernel conntrack mechanism to obtain the pre-NAT addresses for each packet
and use that in the flow and host hashing.
When the shaper is enabled and the host is already performing NAT, the cost
of this lookup is negligible. However, in unlimited mode with no NAT being
performed, there is a significant CPU cost at higher bandwidths. For this
reason, the feature is turned off by default.
Cc: netfilter-devel@vger.kernel.org
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Toke Høiland-Jørgensen [Fri, 6 Jul 2018 15:37:19 +0000 (17:37 +0200)]
netfilter: Add nf_ct_get_tuple_skb global lookup function
This adds a global netfilter function to extract a conntrack tuple from an
skb. The function uses a new function added to nf_ct_hook, which will try
to get the tuple from skb->_nfct, and do a full lookup if that fails. This
makes it possible to use the lookup function before the skb has passed
through the conntrack init hooks (e.g., in an ingress qdisc). The tuple is
copied to the caller to avoid issues with reference counting.
The function returns false if conntrack is not loaded, allowing it to be
used without incurring a module dependency on conntrack. This is used by
the NAT mode in sch_cake.
Cc: netfilter-devel@vger.kernel.org
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Toke Høiland-Jørgensen [Fri, 6 Jul 2018 15:37:19 +0000 (17:37 +0200)]
sch_cake: Add optional ACK filter
The ACK filter is an optional feature of CAKE which is designed to improve
performance on links with very asymmetrical rate limits. On such links
(which are unfortunately quite prevalent, especially for DSL and cable
subscribers), the downstream throughput can be limited by the number of
ACKs capable of being transmitted in the *upstream* direction.
Filtering ACKs can, in general, have adverse effects on TCP performance
because it interferes with ACK clocking (especially in slow start), and it
reduces the flow's resiliency to ACKs being dropped further along the path.
To alleviate these drawbacks, the ACK filter in CAKE tries its best to
always keep enough ACKs queued to ensure forward progress in the TCP flow
being filtered. It does this by only filtering redundant ACKs. In its
default 'conservative' mode, the filter will always keep at least two
redundant ACKs in the queue, while in 'aggressive' mode, it will filter
down to a single ACK.
The ACK filter works by inspecting the per-flow queue on every packet
enqueue. Starting at the head of the queue, the filter looks for another
eligible packet to drop (so the ACK being dropped is always closer to the
head of the queue than the packet being enqueued). An ACK is eligible only
if it ACKs *fewer* bytes than the new packet being enqueued, including any
SACK options. This prevents duplicate ACKs from being filtered, to avoid
interfering with retransmission logic. In addition, we check TCP header
options and only drop those that are known to not interfere with sender
state. In particular, packets with unknown option codes are never dropped.
In aggressive mode, an eligible packet is always dropped, while in
conservative mode, at least two ACKs are kept in the queue. Only pure ACKs
(with no data segments) are considered eligible for dropping, but when an
ACK with data segments is enqueued, this can cause another pure ACK to
become eligible for dropping.
The approach described above ensures that this ACK filter avoids most of
the drawbacks of a naive filtering mechanism that only keeps flow state but
does not inspect the queue. This is the rationale for including the ACK
filter in CAKE itself rather than as separate module (as the TC filter, for
instance).
Our performance evaluation has shown that on a 30/1 Mbps link with a
bidirectional traffic test (RRUL), turning on the ACK filter on the
upstream link improves downstream throughput by ~20% (both modes) and
upstream throughput by ~12% in conservative mode and ~40% in aggressive
mode, at the cost of ~5ms of inter-flow latency due to the increased
congestion.
In *really* pathological cases, the effect can be a lot more; for instance,
the ACK filter increases the achievable downstream throughput on a link
with 100 Kbps in the upstream direction by an order of magnitude (from ~2.5
Mbps to ~25 Mbps).
Finally, even though we consider the ACK filter to be safer than most, we
do not recommend turning it on everywhere: on more symmetrical link
bandwidths the effect is negligible at best.
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Toke Høiland-Jørgensen [Fri, 6 Jul 2018 15:37:19 +0000 (17:37 +0200)]
sch_cake: Add ingress mode
The ingress mode is meant to be enabled when CAKE runs downlink of the
actual bottleneck (such as on an IFB device). The mode changes the shaper
to also account dropped packets to the shaped rate, as these have already
traversed the bottleneck.
Enabling ingress mode will also tune the AQM to always keep at least two
packets queued *for each flow*. This is done by scaling the minimum queue
occupancy level that will disable the AQM by the number of active bulk
flows. The rationale for this is that retransmits are more expensive in
ingress mode, since dropped packets have to traverse the bottleneck again
when they are retransmitted; thus, being more lenient and keeping a minimum
number of packets queued will improve throughput in cases where the number
of active flows are so large that they saturate the bottleneck even at
their minimum window size.
This commit also adds a separate switch to enable ingress mode rate
autoscaling. If enabled, the autoscaling code will observe the actual
traffic rate and adjust the shaper rate to match it. This can help avoid
latency increases in the case where the actual bottleneck rate decreases
below the shaped rate. The scaling filters out spikes by an EWMA filter.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Toke Høiland-Jørgensen [Fri, 6 Jul 2018 15:37:19 +0000 (17:37 +0200)]
sched: Add Common Applications Kept Enhanced (cake) qdisc
sch_cake targets the home router use case and is intended to squeeze the
most bandwidth and latency out of even the slowest ISP links and routers,
while presenting an API simple enough that even an ISP can configure it.
Example of use on a cable ISP uplink:
tc qdisc add dev eth0 cake bandwidth 20Mbit nat docsis ack-filter
To shape a cable download link (ifb and tc-mirred setup elided)
tc qdisc add dev ifb0 cake bandwidth 200mbit nat docsis ingress wash
CAKE is filled with:
* A hybrid Codel/Blue AQM algorithm, "Cobalt", tied to an FQ_Codel
derived Flow Queuing system, which autoconfigures based on the bandwidth.
* A novel "triple-isolate" mode (the default) which balances per-host
and per-flow FQ even through NAT.
* An deficit based shaper, that can also be used in an unlimited mode.
* 8 way set associative hashing to reduce flow collisions to a minimum.
* A reasonable interpretation of various diffserv latency/loss tradeoffs.
* Support for zeroing diffserv markings for entering and exiting traffic.
* Support for interacting well with Docsis 3.0 shaper framing.
* Extensive support for DSL framing types.
* Support for ack filtering.
* Extensive statistics for measuring, loss, ecn markings, latency
variation.
A paper describing the design of CAKE is available at
https://arxiv.org/abs/1804.07617, and will be published at the 2018 IEEE
International Symposium on Local and Metropolitan Area Networks (LANMAN).
This patch adds the base shaper and packet scheduler, while subsequent
commits add the optional (configurable) features. The full userspace API
and most data structures are included in this commit, but options not
understood in the base version will be ignored.
Various versions baking have been available as an out of tree build for
kernel versions going back to 3.10, as the embedded router world has been
running a few years behind mainline Linux. A stable version has been
generally available on lede-17.01 and later.
sch_cake replaces a combination of iptables, tc filter, htb and fq_codel
in the sqm-scripts, with sane defaults and vastly simpler configuration.
CAKE's principal author is Jonathan Morton, with contributions from
Kevin Darbyshire-Bryant, Toke Høiland-Jørgensen, Sebastian Moeller,
Ryan Mounce, Tony Ambardar, Dean Scarff, Nils Andreas Svee, Dave Täht,
and Loganaden Velvindron.
Testing from Pete Heist, Georgios Amanakis, and the many other members of
the cake@lists.bufferbloat.net mailing list.
tc -s qdisc show dev eth2
qdisc cake 8017: root refcnt 2 bandwidth 1Gbit diffserv3 triple-isolate split-gso rtt 100.0ms noatm overhead 38 mpu 84
Sent
51504294511 bytes
37724591 pkt (dropped 6, overlimits
64958695 requeues 12)
backlog 0b 0p requeues 12
memory used:
1053008b of 15140Kb
capacity estimate: 970Mbit
min/max network layer size: 28 / 1500
min/max overhead-adjusted size: 84 / 1538
average network hdr offset: 14
Bulk Best Effort Voice
thresh 62500Kbit 1Gbit 250Mbit
target 5.0ms 5.0ms 5.0ms
interval 100.0ms 100.0ms 100.0ms
pk_delay 5us 5us 6us
av_delay 3us 2us 2us
sp_delay 2us 1us 1us
backlog 0b 0b 0b
pkts
3164050 25030267 9530280
bytes
3227519915 35396974782 12879808898
way_inds 0 8 0
way_miss 21 366 25
way_cols 0 0 0
drops 5 0 1
marks 0 0 0
ack_drop 0 0 0
sp_flows 1 3 0
bk_flows 0 1 1
un_flows 0 0 0
max_len 68130 68130 68130
Tested-by: Pete Heist <peteheist@gmail.com>
Tested-by: Georgios Amanakis <gamanakis@gmail.com>
Signed-off-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesus Sanchez-Palencia [Mon, 9 Jul 2018 23:20:56 +0000 (16:20 -0700)]
net: Use __u32 in uapi net_stamp.h
We are not supposed to use u32 in uapi, so change the flags member of
struct sock_txtime from u32 to __u32 instead.
Fixes:
80b14dee2bea ("net: Add a new socket option for a future transmit time")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 9 Jul 2018 23:24:18 +0000 (16:24 -0700)]
Merge branch 'mlxsw-More-Spectrum-2-preparations'
aIdo Schimmel says:
====================
mlxsw: More Spectrum-2 preparations
This is the second and last set of preparations towards initial
Spectrum-2 support in mlxsw. It mainly re-arranges parts of the code
that need to work with both ASICs, but somewhat differ.
The first three patches allow different ASICs to register different set
of operations for KVD linear (KVDL) management. In Spectrum-2 there is
no linear memory and instead entries that reside there in Spectrum
(e.g., nexthops) are hashed and inserted to the hash-based KVD memory.
The fourth patch does a similar restructuring in the low-level multicast
router code. This is necessary because multicast routing is implemented
using regular circuit TCAM (C-TCAM) in Spectrum, whereas Spectrum-2 uses
an algorithmic TCAM (A-TCAM).
Next six patches prepare the ACL code for the introduction of A-TCAM in
follow-up patch sets.
Last two patches allow different ASICs to require different firmware
versions and add two resources that need to be queried from firmware by
Spectrum-2 specific code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sun, 8 Jul 2018 20:51:27 +0000 (23:51 +0300)]
mlxsw: resources: Add couple of Spectrum-2 KVD resources
These resources are needed for Spectrum-2 KVD linear management
implementation.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sun, 8 Jul 2018 20:51:26 +0000 (23:51 +0300)]
mlxsw: spectrum: Prepare for multiple FW versions for Spectrum and Spectrum-2
Prepare for Spectrum-2 FW version checking and
make mlxsw_sp_fw_rev_validate() per-ASIC as well as required FW revision
and FW filename.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sun, 8 Jul 2018 20:51:25 +0000 (23:51 +0300)]
mlxsw: spectrum_acl: Implement priority setting for rules inserted to TCAM
For Spectrum-2, we need to insert priority to C-TCAM because HW
needs that info in order to correctly process scenarios where rules
are in both C-TCAM and A-TCAM.
So extend the mlxsw_sp_acl_ctcam_entry_add() args to accept indication
if priority needs to be filled up and implement the priority
computation and fill-up.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sun, 8 Jul 2018 20:51:24 +0000 (23:51 +0300)]
mlxsw: reg: Add priority field for PTCEV2 register
This is going to be needed for Spectrum-2 C-TCAM implementation.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sun, 8 Jul 2018 20:51:23 +0000 (23:51 +0300)]
mlxsw: spectrum_acl: Move block items encoding into Spectrum op
Since Spectrum-2 encodes blocks into different HW layout, push this
code into Spectrum-specific op.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sun, 8 Jul 2018 20:51:22 +0000 (23:51 +0300)]
mlxsw: spectrum_acl: Convert mlxsw_afk_create args to ops
Since the flex keys for Spectrum-2 differ not only in blocks definitions
but also in encoding layout, prepare for the implementation and pass
Spectrum/Spectrum-2 specific ops down to mlxsw_afk_create.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sun, 8 Jul 2018 20:51:21 +0000 (23:51 +0300)]
mlxsw: spectrum_acl: Add tcam init/fini ops
Add ops to be called on driver instance init and fini.
This is needed in order to be possible to do Spectrum-2 specific init
and fini work.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sun, 8 Jul 2018 20:51:20 +0000 (23:51 +0300)]
mlxsw: spectrum_acl: Split TCAM handling 3 ways
To allow easy and clean Spectrum-2 implementation for things that differ
from Spectrum, split the existing ACL TCAM code 3 ways:
1) common code that calls Spectrum/Spectrum-2 specific ops
2) Spectrum ops implementations
3) common C-TCAM code that is going to be shared between Spectrum and
Spectrum-2 implementations
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sun, 8 Jul 2018 20:51:19 +0000 (23:51 +0300)]
mlxsw: spectrum_mr_tcam: Push Spectrum-specific operations into a separate file
Since Spectrum-2 has different handling of TCAM, push Spectrum MR TCAM
bits to a separate file accessible by ops which allows to implement
Spectrum-2 specific ops.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sun, 8 Jul 2018 20:51:18 +0000 (23:51 +0300)]
mlxsw: spectrum_kvdl: Pass entry_count to free function
For the Spectrum-2 KVD linear manager implementation, entry_count will be
needed even for the free function. So pass it down.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sun, 8 Jul 2018 20:51:17 +0000 (23:51 +0300)]
mlxsw: spectrum_kvdl: Pass entry type to alloc/free
Future Spectrum-2 KVD linear manager implementation needs to know type
of the entry to alloc and free. So define the types in an enum and
pass it down to alloc and free functions. Once the entry type
is passed down, KVDL common part knows sizes of each entry types,
so replace size function arg with entry count.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sun, 8 Jul 2018 20:51:16 +0000 (23:51 +0300)]
mlxsw: spectrum_kvdl: Push out KVD linear management into ops
In Spectrum-2 there is a different implementation of KVD linear
management. Unlike in Spectrum where there is a single index space,
in Spectrum-2 the indexes are per-resource. Also there is need to
explicitly tell HW that an entry is no longer used.
So push out the existing implementation into spectrum1_kvdl.c and
prepare ops infrastructure to allow new implementation in a follow-up.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kees Cook [Wed, 4 Jul 2018 17:28:47 +0000 (10:28 -0700)]
net/mlx5: Use 2-factor allocator calls
This restores the use of 2-factor allocation helpers that were already
fixed treewide. Please do not use open-coded multiplication; prefer,
instead, using 2-factor allocation helpers.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Mon, 9 Jul 2018 07:45:14 +0000 (09:45 +0200)]
tcp: remove SG-related comment in tcp_sendmsg()
Since commit
74d4a8f8d378 ("tcp: remove sk_can_gso() use"), the code
doesn't care whether the interface supports SG.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 9 Jul 2018 21:55:54 +0000 (14:55 -0700)]
Merge branch 'fix-use-after-free-bugs-in-skb-list-processing'
Edward Cree says:
====================
fix use-after-free bugs in skb list processing
A couple of bugs in skb list handling were spotted by Dan Carpenter, with
the help of Smatch; following up on them I found a couple more similar
cases. This series fixes them by changing the relevant loops to use the
dequeue-enqueue model (rather than in-place list modification).
v3: fixed another similar bug in __netif_receive_skb_list_core().
v2: dropped patch #3 (new list.h helper), per DaveM's request.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree [Mon, 9 Jul 2018 17:10:19 +0000 (18:10 +0100)]
net: core: fix use-after-free in __netif_receive_skb_list_core
__netif_receive_skb_core can free the skb, so we have to use the dequeue-
enqueue model when calling it from __netif_receive_skb_list_core.
Fixes:
88eb1944e18c ("net: core: propagate SKB lists through packet_type lookup")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree [Mon, 9 Jul 2018 17:10:02 +0000 (18:10 +0100)]
netfilter: fix use-after-free in NF_HOOK_LIST
nf_hook() can free the skb, so we need to remove it from the list before
calling, and add passed skbs to a sublist afterwards.
Fixes:
17266ee93984 ("net: ipv4: listified version of ip_rcv")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree [Mon, 9 Jul 2018 17:09:54 +0000 (18:09 +0100)]
net: core: fix uses-after-free in list processing
In netif_receive_skb_list_internal(), all of skb_defer_rx_timestamp(),
do_xdp_generic() and enqueue_to_backlog() can lead to kfree(skb). Thus,
we cannot wait until after they return to remove the skb from the list;
instead, we remove it first and, in the pass case, add it to a sublist
afterwards.
In the case of enqueue_to_backlog() we have already decided not to pass
when we call the function, so we do not need a sublist.
Fixes:
7da517a3bc52 ("net: core: Another step of skb receive list processing")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Mon, 9 Jul 2018 16:20:04 +0000 (12:20 -0400)]
net: allow fallback function to pass netdev
For most of these calls we can just pass NULL through to the fallback
function as the sb_dev. The only cases where we cannot are the cases where
we might be dealing with either an upper device or a driver that would
have configured things to support an sb_dev itself.
The only driver that has any significant change in this patch set should be
ixgbe as we can drop the redundant functionality that existed in both the
ndo_select_queue function and the fallback function that was passed through
to us.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck [Mon, 9 Jul 2018 16:19:59 +0000 (12:19 -0400)]
net: allow ndo_select_queue to pass netdev
This patch makes it so that instead of passing a void pointer as the
accel_priv we instead pass a net_device pointer as sb_dev. Making this
change allows us to pass the subordinate device through to the fallback
function eventually so that we can keep the actual code in the
ndo_select_queue call as focused on possible on the exception cases.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck [Mon, 9 Jul 2018 16:19:54 +0000 (12:19 -0400)]
net: Add generic ndo_select_queue functions
This patch adds a generic version of the ndo_select_queue functions for
either returning 0 or selecting a queue based on the processor ID. This is
generally meant to just reduce the number of functions we have to change
in the future when we have to deal with ndo_select_queue changes.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck [Mon, 9 Jul 2018 16:19:48 +0000 (12:19 -0400)]
net: Add support for subordinate traffic classes to netdev_pick_tx
This change makes it so that we can support the concept of subordinate
device traffic classes to the core networking code. In doing this we can
start pulling out the driver specific bits needed to support selecting a
queue based on an upper device.
The solution at is currently stands is only partially implemented. I have
the start of some XPS bits in here, but I would still need to allow for
configuration of the XPS maps on the queues reserved for the subordinate
devices. For now I am using the reference to the sb_dev XPS map as just a
way to skip the lookup of the lower device XPS map for now as that would
result in the wrong queue being picked.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck [Mon, 9 Jul 2018 16:19:43 +0000 (12:19 -0400)]
ixgbe: Add code to populate and use macvlan TC to Tx queue map
This patch makes it so that we use the tc_to_txq mapping in the macvlan
device in order to select the Tx queue for outgoing packets.
The idea here is to try and move away from using ixgbe_select_queue and to
come up with a generic way to make this work for devices going forward. By
encoding this information in the netdev this can become something that can
be used generically as a solution for similar setups going forward.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck [Mon, 9 Jul 2018 16:19:38 +0000 (12:19 -0400)]
net: Add support for subordinate device traffic classes
This patch is meant to provide the basic tools needed to allow us to create
subordinate device traffic classes. The general idea here is to allow
subdividing the queues of a device into queue groups accessible through an
upper device such as a macvlan.
The idea here is to enforce the idea that an upper device has to be a
single queue device, ideally with IFF_NO_QUQUE set. With that being the
case we can pretty much guarantee that the tc_to_txq mappings and XPS maps
for the upper device are unused. As such we could reuse those in order to
support subdividing the lower device and distributing those queues between
the subordinate devices.
In order to distinguish between a regular set of traffic classes and if a
device is carrying subordinate traffic classes I changed num_tc from a u8
to a s16 value and use the negative values to represent the subordinate
pool values. So starting at -1 and running to -32768 we can encode those as
pool values, and the existing values of 0 to 15 can be maintained.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck [Mon, 9 Jul 2018 16:19:32 +0000 (12:19 -0400)]
net-sysfs: Drop support for XPS and traffic_class on single queue device
This patch makes it so that we do not report the traffic class or allow XPS
configuration on single queue devices. This is mostly to avoid unnecessary
complexity with changes I have planned that will allow us to reuse
the unused tc_to_txq and XPS configuration on a single queue device to
allow it to make use of a subset of queues on an underlying device.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Eric Dumazet [Sun, 8 Jul 2018 06:15:56 +0000 (23:15 -0700)]
tcp: remove redundant SOCK_DONE checks
In both tcp_splice_read() and tcp_recvmsg(), we already test
sock_flag(sk, SOCK_DONE) right before evaluating sk->sk_state,
so "!sock_flag(sk, SOCK_DONE)" is always true.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 8 Jul 2018 08:05:20 +0000 (17:05 +0900)]
Merge branch 'mlxsw-Spectrum2-acl-prep'
Ido Schimmel says:
====================
mlxsw: Spectrum-2 small ACL preparations
This is the first set of changes towards Spectrum-2 support in the mlxsw
driver. It contains small changes that prepare the code for the later
introduction of Spectrum-2 support.
The Spectrum-2 ASIC uses an algorithmic TCAM (A-TCAM) instead of a
circuit TCAM (C-TCAM) as Spectrum, and thus most of the changes are
around the ACL code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sun, 8 Jul 2018 07:00:21 +0000 (10:00 +0300)]
mlxsw: core_acl_flex_actions: Fix helper to get the first KVD linear index
The helper should return always KVD linear index of the second set.
It is unused now, but going to be used soon.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sun, 8 Jul 2018 07:00:20 +0000 (10:00 +0300)]
mlxsw: core_acl_flex_actions: Allow the first set to be dummy
In Spectrum-2, the real action sets are always in KVD linear. The first
set is always empty and contains only pointer to the first real set in
KVD linear. So provide possibility to specify the first set is the dummy
one.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sun, 8 Jul 2018 07:00:19 +0000 (10:00 +0300)]
mlxsw: spectrum: Put pointer to flex action ops to mlxsw_sp
Spectrum-2 need a slightly different handling of flexible actions. So
put an ops pointer in mlxsw_sp struct and rename it.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sun, 8 Jul 2018 07:00:18 +0000 (10:00 +0300)]
mlxsw: core_acl_flex_keys: Change SRC_SYS_PORT flex key element size
The SRC_SYS_PORT is passed as 8 bit value down to hw anyway, so cap it
in the driver as well. Also, in Spectrum-2 the FW iface for SRC_SYS_PORT
is only 8 bits, so prepare for it.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sun, 8 Jul 2018 07:00:17 +0000 (10:00 +0300)]
mlxsw: core_acl_flex_keys: Split MAC and IP address flex key elements
Since in Spectrum-2, MACs are split and IP addresses are split as well,
in order to use the same elements for Spectrum and Spectrum-2 split them
now.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sun, 8 Jul 2018 07:00:16 +0000 (10:00 +0300)]
mlxsw: spectrum_acl: Ignore always-zeroed bits in tp->prio
The lowest 16 bits of tp->prio are always zero, so ignore them with a
shift.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sun, 8 Jul 2018 07:00:15 +0000 (10:00 +0300)]
mlxsw: reg: Introduce Flex2 key type for PTAR register
Introduce Flex2 key type for PTAR register which is used in Spectrum-2.
Also, extend mlxsw_reg_ptar_pack() to set the value according to the
caller.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>