OSDN Git Service
Zheng Yongjun [Thu, 10 Dec 2020 13:48:33 +0000 (21:48 +0800)]
net: stmmac: simplify the return tc_delete_knode()
Simplify the return expression.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 10 Dec 2020 20:49:45 +0000 (12:49 -0800)]
Merge tag 'linux-can-next-for-5.11-
20201210' of git://git./linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2020-12-10
here's a pull request of 7 patches for net-next/master.
The first patch is by Oliver Hartkopp for the CAN ISOTP, which adds support for
functional addressing.
A patch by Antonio Quartulli removes an unneeded unlikely() annotation from the
rx-offload helper.
The next three patches target the m_can driver. Sean Nyekjaers's patch removes
a double clearing of clock stop request bit, Patrik Flykt's patch moves the
runtime PM enable/disable to m_can_platform and Jarkko Nikula's patch adds a
PCI glue code driver.
Fabio Estevam's patch converts the flexcan driver to DT only.
And Manivannan Sadhasivam's patchd for the mcp251xfd driver adds internal
loopback mode support.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Antonio Quartulli [Thu, 10 Dec 2020 08:55:49 +0000 (09:55 +0100)]
vxlan: avoid double unlikely() notation when using IS_ERR()
The definition of IS_ERR() already applies the unlikely() notation
when checking the error status of the passed pointer. For this
reason there is no need to have the same notation outside of
IS_ERR() itself.
Clean up code by removing redundant notation.
Signed-off-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
Manivannan Sadhasivam [Tue, 1 Dec 2020 05:40:19 +0000 (11:10 +0530)]
can: mcp251xfd: Add support for internal loopback mode
MCP251xFD supports internal loopback mode which can be used to verify CAN
functionality in the absence of a real CAN device.
Link: https://lore.kernel.org/r/20201201054019.11012-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[mkl: mcp251xfd_get_normal_mode(): move CAN_CTRLMODE_LOOPBACK check to front]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Fabio Estevam [Sat, 28 Nov 2020 13:28:55 +0000 (10:28 -0300)]
can: flexcan: convert the driver to DT-only
The flexcan driver runs only on DT platforms, so simplify the code by using
of_device_get_match_data() to retrieve the driver data and also by removing the
unused id_table.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20201128132855.7724-1-festevam@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Jarkko Nikula [Tue, 17 Nov 2020 16:08:27 +0000 (18:08 +0200)]
can: m_can: add PCI glue driver for Intel Elkhart Lake
Add support for M_CAN controller on Intel Elkhart Lake attached to the PCI bus.
It integrates the Bosch M_CAN controller with Message RAM and the wrapper IP
block with additional registers which all of them are within the same MMIO
range.
Currently only interrupt control register from wrapper IP is used and the MRAM
configuration is expected to come from the firmware via "bosch,mram-cfg" device
property and parsed by m_can.c core.
Initial implementation is done by Felipe Balbi while he was working at Intel
with later changes from Raymond Tan and me.
Co-developed-by: Felipe Balbi (Intel) <balbi@kernel.org>
Co-developed-by: Raymond Tan <raymond.tan@intel.com>
Signed-off-by: Felipe Balbi (Intel) <balbi@kernel.org>
Signed-off-by: Raymond Tan <raymond.tan@intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20201117160827.3636264-1-jarkko.nikula@linux.intel.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Patrik Flykt [Fri, 23 Oct 2020 11:58:00 +0000 (14:58 +0300)]
can: m_can: move runtime PM enable/disable to m_can_platform
This is a preparatory patch for upcoming PCI based M_CAN devices. The current
PM implementation would cause PCI based drivers to enable PM twice, once when
the PCI device is added and a second time in m_can_class_register(). This will
cause 'Unbalanced pm_runtime_enable!' to be logged, and is a situation that
should be avoided.
Therefore, in anticipation of PCI devices, move PM enabling out from M_CAN
class registration to its only user, the m_can_platform driver.
Signed-off-by: Patrik Flykt <patrik.flykt@linux.intel.com>
Link: https://lore.kernel.org/r/20201023115800.46538-2-patrik.flykt@linux.intel.com
[mkl: m_can_plat_probe(): fix error handling
m_can_class_register(): simplify error handling]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Sean Nyekjaer [Wed, 11 Dec 2019 06:32:27 +0000 (07:32 +0100)]
can: m_can: m_can_config_endisable(): remove double clearing of clock stop request bit
The CSR bit is already cleared when arriving here so remove this section of
duplicate code.
The registers set in m_can_config_endisable() is set to same exact values as
before this patch.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Acked-by: Sriram Dash <sriram.dash@samsung.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20191211063227.84259-1-sean@geanix.com
Fixes:
f524f829b75a ("can: m_can: Create a m_can platform framework")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Antonio Quartulli [Thu, 10 Dec 2020 08:53:21 +0000 (09:53 +0100)]
can: rx-offload: can_rx_offload_offload_one(): avoid double unlikely() notation when using IS_ERR()
The definition of IS_ERR() already applies the unlikely() notation when
checking the error status of the passed pointer. For this reason there is no
need to have the same notation outside of IS_ERR() itself.
Clean up code by removing redundant notation.
Signed-off-by: Antonio Quartulli <a@unstable.cc>
Link: https://lore.kernel.org/r/20201210085321.18693-1-a@unstable.cc
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oliver Hartkopp [Sun, 6 Dec 2020 14:47:31 +0000 (15:47 +0100)]
can: isotp: add SF_BROADCAST support for functional addressing
When CAN_ISOTP_SF_BROADCAST is set in the CAN_ISOTP_OPTS flags the CAN_ISOTP
socket is switched into functional addressing mode, where only single frame
(SF) protocol data units can be send on the specified CAN interface and the
given tp.tx_id after bind().
In opposite to normal and extended addressing this socket does not register a
CAN-ID for reception which would be needed for a 1-to-1 ISOTP connection with a
segmented bi-directional data transfer.
Sending SFs on this socket is therefore a TX-only 'broadcast' operation.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Thomas Wagner <thwa1@web.de>
Link: https://lore.kernel.org/r/20201206144731.4609-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
David S. Miller [Thu, 10 Dec 2020 04:33:20 +0000 (20:33 -0800)]
Merge branch 'hns3-next'
Huazhong Tan says:
====================
net: hns3: updates for -next
This patchset adds support for tc mqprio offload, hw tc
offload of tc flower, and adpation for max rss size changes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Guojia Liao [Thu, 10 Dec 2020 03:42:12 +0000 (11:42 +0800)]
net: hns3: adjust rss tc mode configure command
For the max rss size of PF may be up to 512, the max queue
number of single tc may be up to 512 too. For the total queue
numbers may be up to 1280, so the queue offset of each tc may
be more than 1024. So adjust the rss tc mode configuration
command, including extend tc size field from 10 bits to 11
bits, and extend tc size field from 3 bits to 4 bits.
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guojia Liao [Thu, 10 Dec 2020 03:42:11 +0000 (11:42 +0800)]
net: hns3: adjust rss indirection table configure command
For the max rss size of PF may be up to 512, so adjust the
command of configuring rss indirection table to support
queue id larger than 255. The width of queue id is extended
from 8 bits to 10 bits. The high 2 bits are stored in filed
rss_qid_h when the queue id is larger than 255.
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guojia Liao [Thu, 10 Dec 2020 03:42:10 +0000 (11:42 +0800)]
net: hns3: add support for max 512 rss size
Currently, the driver gets the max rss size from configuration
file when initialization. Both the PF and VF share the same
max rss size, and no more than 128.
For DEVICE_VERSION_V3, the max rss size for PF can be up to
512, so there is a new field in configuration file to store it,
the old filed is used for VF.
To be compatible with boards using old configure file, the PF
will use the old filed if the one is zero.
For the rss size may be larger than 256, so the type of
rss_indirection_tbl of struct hclge_vport should be changed to
u16 as well.
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Thu, 10 Dec 2020 03:42:09 +0000 (11:42 +0800)]
net: hns3: add support for hw tc offload of tc flower
Some new device supports forwarding packet to queues of specified
TC when flow director rule hit. So add support to configure flow
director rule by tc flower. To avoid rule conflict, add a new flow
director mode HCLGE_FD_TC_FLOWER_ACTIVE, and only one mode can be
active at the same time.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Thu, 10 Dec 2020 03:42:08 +0000 (11:42 +0800)]
net: hns3: add support for forwarding packet to queues of specified TC when flow director rule hit
For some new device, it supports forwarding packet to queues
of specified TC when flow director rule hit. So extend the
command handle to support it.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Thu, 10 Dec 2020 03:42:07 +0000 (11:42 +0800)]
net: hns3: add support for tc mqprio offload
Currently, the HNS3 driver only supports offload for tc number
and prio_tc. This patch adds support for other qopts, including
queues count and offset for each tc.
When enable tc mqprio offload, it's not allowed to change
queue numbers by ethtool. For hardware limitation, the queue
number of each tc should be power of 2.
For the queues is not assigned to each tc by average, so it's
should return vport->alloc_tqps for hclge_get_max_channels().
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Thu, 10 Dec 2020 03:42:06 +0000 (11:42 +0800)]
net: hns3: refine the struct hane3_tc_info
Currently, there are multiple members related to tc information
in struct hnae3_knic_private_info. Merge them into a new struct
hnae3_tc_info.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 9 Dec 2020 16:18:21 +0000 (08:18 -0800)]
nfp: silence set but not used warning with IPV6=n
Test robot reports:
drivers/net/ethernet/netronome/nfp/crypto/tls.c: In function 'nfp_net_tls_rx_resync_req':
drivers/net/ethernet/netronome/nfp/crypto/tls.c:477:18: warning: variable 'ipv6h' set but not used [-Wunused-but-set-variable]
477 | struct ipv6hdr *ipv6h;
| ^~~~~
In file included from include/linux/compiler_types.h:65,
from <command-line>:
drivers/net/ethernet/netronome/nfp/crypto/tls.c: In function 'nfp_net_tls_add':
include/linux/compiler_attributes.h:208:41: warning: statement will never be executed [-Wswitch-unreachable]
208 | # define fallthrough __attribute__((__fallthrough__))
| ^~~~~~~~~~~~~
drivers/net/ethernet/netronome/nfp/crypto/tls.c:299:3: note: in expansion of macro 'fallthrough'
299 | fallthrough;
| ^~~~~~~~~~~
Use the IPv6 header in the switch, it doesn't matter which header
we use to read the version field.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wong Vee Khee [Wed, 9 Dec 2020 22:47:00 +0000 (06:47 +0800)]
net: stmmac: allow stmmac to probe for C45 PHY devices
Assign stmmac's mdio_bus probe capabilities to MDIOBUS_C22_C45.
This extended the probing of C45 PHY devices on the MDIO bus.
Signed-off-by: Wong Vee Khee <vee.khee.wong@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 10 Dec 2020 03:38:10 +0000 (19:38 -0800)]
Merge branch 'Add-support-for-VSOL-V2801F-CarlitoxxPro-CPGOS03-GPON-mo
dule'
Russell King says:
====================
Add support for VSOL V2801F/CarlitoxxPro CPGOS03 GPON module
This patch set adds support for the V2801F / CarlitoxxPro module. This
requires two changes:
1) the module only supports single byte reads to the ID EEPROM,
while we need to still permit sequential reads to the diagnostics
EEPROM for atomicity reasons.
2) we need to relax the encoding check when we have no reported
capabilities to allow 1000base-X based on the module bitrate.
Thanks to Pali Rohár for responsive testing over the last two days.
(Resending, dropping the utf-8 characters in Pali's name so the patches
get through vger. Added Andrew's r-b tags.)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Wed, 9 Dec 2020 11:22:54 +0000 (11:22 +0000)]
net: sfp: relax bitrate-derived mode check
Do not check the encoding when deriving 1000BASE-X from the bitrate
when no other modes are discovered. Some GPON modules (VSOL V2801F
and CarlitoxxPro CPGOS03-0490 v2.0) indicate NRZ encoding with a
1200Mbaud bitrate, but should be driven with 1000BASE-X on the host
side.
Tested-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Wed, 9 Dec 2020 11:22:49 +0000 (11:22 +0000)]
net: sfp: VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0 workaround
Add a workaround for the detection of VSOL V2801F / CarlitoxxPro
CPGOS03-0490 v2.0 GPON module which CarlitoxxPro states needs single
byte I2C reads to the EEPROM.
Pali Rohár reports that he also has a CarlitoxxPro-based V2801F module,
which reports a manufacturer of "OEM". This manufacturer can't be
matched as it appears in many different modules, so also match the part
number too.
Reported-by: Thomas Schreiber <tschreibe@gmail.com>
Reported-by: Pali Rohár <pali@kernel.org>
Tested-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xie He [Wed, 9 Dec 2020 08:16:04 +0000 (00:16 -0800)]
net: x25: Fix handling of Restart Request and Restart Confirmation
1. When the x25 module gets loaded, layer 2 may already be running and
connected. In this case, although we are in X25_LINK_STATE_0, we still
need to handle the Restart Request received, rather than ignore it.
2. When we are in X25_LINK_STATE_2, we have already sent a Restart Request
and is waiting for the Restart Confirmation with t20timer. t20timer will
restart itself repeatedly forever so it will always be there, as long as we
are in State 2. So we don't need to check x25_t20timer_pending again.
Fixes:
d023b2b9ccc2 ("net/x25: fix restart request/confirm handling")
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 10 Dec 2020 03:31:58 +0000 (19:31 -0800)]
Merge branch 'mptcp-fixes'
Paolo Abeni says:
====================
mptcp: a bunch of fixes
This series includes a few fixes following-up the
recent code refactor for the MPTCP RX and TX paths.
Boundling them together, since the fixes are somewhat
related.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Wed, 9 Dec 2020 11:03:31 +0000 (12:03 +0100)]
mptcp: be careful on subflows shutdown
When the workqueue disposes of the msk, the subflows can still
receive some data from the peer after __mptcp_close_ssk()
completes.
The above could trigger a race between the msk receive path and the
msk destruction. Acquiring the mptcp_data_lock() in __mptcp_destroy_sock()
will not save the day: the rx path could be reached even after msk
destruction completes.
Instead use the subflow 'disposable' flag to prevent entering
the msk receive path after __mptcp_close_ssk().
Fixes:
e16163b6e2b7 ("mptcp: refactor shutdown and close")
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Wed, 9 Dec 2020 11:03:30 +0000 (12:03 +0100)]
mptcp: plug subflow context memory leak
When a MPTCP listener socket is closed with unaccepted
children pending, the ULP release callback will be invoked,
but nobody will call into __mptcp_close_ssk() on the
corresponding subflow.
As a consequence, at ULP release time, the 'disposable' flag
will be cleared and the subflow context memory will be leaked.
This change addresses the issue always freeing the context if
the subflow is still in the accept queue at ULP release time.
Additionally, this fixes an incorrect code reference in the
related comment.
Note: this fix leverages the changes introduced by the previous
commit.
Fixes:
e16163b6e2b7 ("mptcp: refactor shutdown and close")
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Wed, 9 Dec 2020 11:03:29 +0000 (12:03 +0100)]
mptcp: link MPC subflow into msk only after accept
Christoph reported the following splat:
WARNING: CPU: 0 PID: 4615 at net/ipv4/inet_connection_sock.c:1031 inet_csk_listen_stop+0x8e8/0xad0 net/ipv4/inet_connection_sock.c:1031
Modules linked in:
CPU: 0 PID: 4615 Comm: syz-executor.4 Not tainted 5.9.0 #37
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:inet_csk_listen_stop+0x8e8/0xad0 net/ipv4/inet_connection_sock.c:1031
Code: 03 00 00 00 e8 79 b2 3d ff e9 ad f9 ff ff e8 1f 76 ba fe be 02 00 00 00 4c 89 f7 e8 62 b2 3d ff e9 14 f9 ff ff e8 08 76 ba fe <0f> 0b e9 97 f8 ff ff e8 fc 75 ba fe be 03 00 00 00 4c 89 f7 e8 3f
RSP: 0018:
ffffc900037f7948 EFLAGS:
00010293
RAX:
ffff88810a349c80 RBX:
ffff888114ee1b00 RCX:
ffffffff827b14cd
RDX:
0000000000000000 RSI:
ffffffff827b1c38 RDI:
0000000000000005
RBP:
ffff88810a2a8000 R08:
ffff88810a349c80 R09:
fffff520006fef1f
R10:
0000000000000003 R11:
fffff520006fef1e R12:
ffff888114ee2d00
R13:
dffffc0000000000 R14:
0000000000000001 R15:
ffff888114ee1d68
FS:
00007f2ac1945700(0000) GS:
ffff88811b400000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007ffd44798bc0 CR3:
0000000109810002 CR4:
0000000000170ef0
Call Trace:
__tcp_close+0xd86/0x1110 net/ipv4/tcp.c:2433
__mptcp_close_ssk+0x256/0x430 net/mptcp/protocol.c:1761
__mptcp_destroy_sock+0x49b/0x770 net/mptcp/protocol.c:2127
mptcp_close+0x62d/0x910 net/mptcp/protocol.c:2184
inet_release+0xe9/0x1f0 net/ipv4/af_inet.c:434
__sock_release+0xd2/0x280 net/socket.c:596
sock_close+0x15/0x20 net/socket.c:1277
__fput+0x276/0x960 fs/file_table.c:281
task_work_run+0x109/0x1d0 kernel/task_work.c:151
get_signal+0xe8f/0x1d40 kernel/signal.c:2561
arch_do_signal+0x88/0x1b60 arch/x86/kernel/signal.c:811
exit_to_user_mode_loop kernel/entry/common.c:161 [inline]
exit_to_user_mode_prepare+0x9b/0xf0 kernel/entry/common.c:191
syscall_exit_to_user_mode+0x22/0x150 kernel/entry/common.c:266
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f2ac1254469
Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ff 49 2b 00 f7 d8 64 89 01 48
RSP: 002b:
00007f2ac1944dc8 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
RAX:
ffffffffffffffbf RBX:
000000000069bf00 RCX:
00007f2ac1254469
RDX:
0000000000000000 RSI:
0000000000008982 RDI:
0000000000000003
RBP:
000000000069bf00 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
000000000069bf0c
R13:
00007ffeb53f178f R14:
00000000004668b0 R15:
0000000000000003
After commit
0397c6d85f9c ("mptcp: keep unaccepted MPC subflow into
join list"), the msk's workqueue and/or PM can touch the MPC
subflow - and acquire its socket lock - even if it's still unaccepted.
If the above event races with the relevant listener socket close, we
can end-up with the above splat.
This change addresses the issue delaying the MPC socket insertion
in conn_list at accept time - that is, partially reverting the
blamed commit.
We must additionally ensure that mptcp_pm_fully_established()
happens after accept() time, or the PM will not be able to
handle properly such event - conn_list could be empty otherwise.
In the receive path, we check the subflow list node to ensure
it is out of the listener queue. Be sure client subflows do
not match transiently such condition moving them into the join
list earlier at creation time.
Since we now have multiple mptcp_pm_fully_established() call sites
from different code-paths, said helper can now race with itself.
Use an additional PM status bit to avoid multiple notifications.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/103
Fixes:
0397c6d85f9c ("mptcp: keep unaccepted MPC subflow into join list"),
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xie He [Wed, 9 Dec 2020 01:43:54 +0000 (17:43 -0800)]
net: hdlc_x25: Remove unnecessary skb_reset_network_header calls
1. In x25_xmit, skb_reset_network_header is not necessary before we call
lapb_data_request. The lapb module doesn't need skb->network_header.
So there is no need to set skb->network_header before calling
lapb_data_request.
2. In x25_data_indication (called by the lapb module after data have
been received), skb_reset_network_header is not necessary before we
call netif_rx. After we call netif_rx, the code in net/core/dev.c will
call skb_reset_network_header before handing the skb to upper layers
(in __netif_receive_skb_core, called by __netif_receive_skb_one_core,
called by __netif_receive_skb, called by process_backlog). So we don't
need to call skb_reset_network_header by ourselves.
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Wed, 9 Dec 2020 01:20:02 +0000 (09:20 +0800)]
net/mlx4: simplify the return expression of mlx4_init_cq_table()
Simplify the return expression.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dwip N. Banerjee [Thu, 10 Dec 2020 01:53:31 +0000 (20:53 -0500)]
ibmvnic: fix rx buffer tracking and index management in replenish_rx_pool partial success
We observed that in the error case for batched send_subcrq_indirect() the
driver does not account for the partial success case. This caused Linux to
crash when free_map and pool index are inconsistent.
Driver needs to update the rx pools "available" count when some batched
sends worked but an error was encountered as part of the whole operation.
Also track replenish_add_buff_failure for statistic purposes.
Fixes:
4f0b6812e9b9a ("ibmvnic: Introduce batched RX buffer descriptor transmission")
Signed-off-by: Dwip N. Banerjee <dnbanerg@us.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 10 Dec 2020 03:02:16 +0000 (19:02 -0800)]
Merge branch 'mptcp-Add-port-parameter-to-ADD_ADDR-option'
Mat Martineau says:
====================
mptcp: Add port parameter to ADD_ADDR option
The ADD_ADDR MPTCP option is used to announce available IP addresses
that a peer may connect to when adding more TCP subflows to an existing
MPTCP connection. There is an optional port number field in that
ADD_ADDR header, and this patch set adds capability for that port number
to be sent and received.
Patches 1, 2, and 4 refactor existing ADD_ADDR code to simplify implementation
of port number support.
Patches 3 and 5 are the main functional changes, for sending and
receiving the port number in the MPTCP ADD_ADDR option.
Patch 6 sends the ADD_ADDR option with port number on a bare TCP ACK,
since the extra length of the option may run in to cases where
sufficient TCP option space is not available on a data packet.
Patch 7 plumbs in port number support for the in-kernel MPTCP path
manager.
Patches 8-11 add some optional debug output and a little more cleanup
refactoring.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Wed, 9 Dec 2020 23:51:28 +0000 (15:51 -0800)]
mptcp: use the variable sk instead of open-coding
Since the local variable sk has been defined, use it instead of
open-coding.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Wed, 9 Dec 2020 23:51:27 +0000 (15:51 -0800)]
mptcp: rename add_addr_signal and mptcp_add_addr_status
Since the RM_ADDR signal had been reused with add_addr_signal, it's not
suitable to call it add_addr_signal or mptcp_add_addr_status. So this
patch renamed add_addr_signal to addr_signal, and renamed
mptcp_add_addr_status to mptcp_addr_signal_status.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Wed, 9 Dec 2020 23:51:26 +0000 (15:51 -0800)]
mptcp: drop rm_addr_signal flag
This patch reused add_addr_signal for the RM_ADDR announcing signal, by
defining a new ADD_ADDR status named MPTCP_RM_ADDR_SIGNAL. Then the flag
rm_addr_signal in PM could be dropped.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Wed, 9 Dec 2020 23:51:25 +0000 (15:51 -0800)]
mptcp: print out port and ahmac when receiving ADD_ADDR
This patch printed out more debugging information for the ADD_ADDR
suboption parsing on the incoming path.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Wed, 9 Dec 2020 23:51:24 +0000 (15:51 -0800)]
mptcp: add port parameter for mptcp_pm_announce_addr
This patch added a new parameter 'port' for mptcp_pm_announce_addr. If
this parameter is true, we set the MPTCP_ADD_ADDR_PORT bit of the
add_addr_signal. That means the announced address is added with a port
number.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Wed, 9 Dec 2020 23:51:23 +0000 (15:51 -0800)]
mptcp: send out dedicated packet for ADD_ADDR using port
The process is similar to that of the ADD_ADDR IPv6, this patch also sent
out a pure ack for the ADD_ADDR using port.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Wed, 9 Dec 2020 23:51:22 +0000 (15:51 -0800)]
mptcp: add the outgoing ADD_ADDR port support
This patch added a new add_addr_signal type named MPTCP_ADD_ADDR_PORT,
to identify it is an address with port to be added.
It also added a new parameter 'port' for both mptcp_add_addr_len and
mptcp_pm_add_addr_signal.
In mptcp_established_options_add_addr, we check whether the announced
address is added with port. If it is, we put this port number to
mptcp_out_options's port field.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Wed, 9 Dec 2020 23:51:21 +0000 (15:51 -0800)]
mptcp: use adding up size to get ADD_ADDR length
This patch uses adding up size to get the ADD_ADDR suboption length rather
than returning the ADD_ADDR size constants.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Wed, 9 Dec 2020 23:51:20 +0000 (15:51 -0800)]
mptcp: add port support for ADD_ADDR suboption writing
In rfc8684, the length of ADD_ADDR suboption with IPv4 address and port
is 18 octets, but mptcp_write_options is 32-bit aligned, so we need to
pad it to 20 octets. All the other port related option lengths need to
be added up 2 octets similarly.
This patch added a new field 'port' in mptcp_out_options. When this
field is set with a port number, we need to add up 4 octets for the
ADD_ADDR suboption, and put the port number into the suboption.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Wed, 9 Dec 2020 23:51:19 +0000 (15:51 -0800)]
mptcp: unify ADD_ADDR and ADD_ADDR6 suboptions writing
The length of ADD_ADDR6 is 12 octets longer than ADD_ADDR. That's the
only difference between them.
This patch dropped the duplicate code between ADD_ADDR and ADD_ADDR6
suboptions writing, and unify them into one.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Wed, 9 Dec 2020 23:51:18 +0000 (15:51 -0800)]
mptcp: unify ADD_ADDR and echo suboptions writing
There are two differences between ADD_ADDR suboption and ADD_ADDR echo
suboption: The length of the former is 8 octets longer than the length
of the latter. The former's echo-flag is 0, and latter's echo-flag is 1.
This patch added two local variables, len and echo, to unify ADD_ADDR
and ADD_ADDR echo suboptions writing.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 10 Dec 2020 02:51:59 +0000 (18:51 -0800)]
Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2020-12-09
This series contains updates to ice driver only.
Bruce changes the allocation of ice_flow_prof_params from stack to heap to
avoid excessive stack usage. Corrects a misleading comment and silences a
sparse warning that is not a problem.
Paul allows for HW initialization to continue if PHY abilities cannot
be obtained.
Jeb removes bypassing FW link override and reading Option ROM and
netlist information for non-E810 devices as this is now available on
other devices.
Nick removes vlan_ena field as this information can be gathered by
checking num_vlan.
Jake combines format strings and debug prints to the same line.
Simon adds a space to fix string concatenation.
v4: Drop ACL patches. Change PHY abilities failure message from debug to
warning.
v3: Fix email address for DaveM and fix character in cover letter
v2: Expand on commit message for patch 3 to show example usage/commands.
Reduce number of defensive checks being done.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Wed, 9 Dec 2020 09:27:26 +0000 (17:27 +0800)]
net: marvell: octeontx2: simplify the otx2_ptp_adjfine()
Simplify the return expression.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Wed, 9 Dec 2020 09:26:21 +0000 (17:26 +0800)]
net: dsa: simplify the return rtl8366_vlan_prepare()
Simplify the return expression.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Wed, 9 Dec 2020 09:23:25 +0000 (17:23 +0800)]
net: stmmac: simplify the return dwmac5_rxp_disable()
Simplify the return expression.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Wed, 9 Dec 2020 09:22:41 +0000 (17:22 +0800)]
net: hinic: simplify the return hinic_configure_max_qnum()
Simplify the return expression.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Wed, 9 Dec 2020 09:21:07 +0000 (17:21 +0800)]
net: freescale: dpaa: simplify the return dpaa_eth_refill_bpools()
Simplify the return expression.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Wed, 9 Dec 2020 09:20:31 +0000 (17:20 +0800)]
net: cisco: enic: simplify the return vnic_cq_alloc()
Simplify the return expression.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Wed, 9 Dec 2020 09:19:57 +0000 (17:19 +0800)]
net: emulex: benet: simplify the return expression of be_if_create()
Simplify the return expression.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Wed, 9 Dec 2020 09:18:44 +0000 (17:18 +0800)]
net: marvell: octeontx2: simplify the return expression of rvu_npa_init()
Simplify the return expression.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Wed, 9 Dec 2020 09:17:51 +0000 (17:17 +0800)]
net: marvell: prestera: simplify the return expression of prestera_port_close()
Simplify the return expression.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 10 Dec 2020 00:49:46 +0000 (16:49 -0800)]
Merge branch 'nfc-s3fwrn5-Change-I2C-interrupt-trigger-to-EDGE_RISING'
Bongsu Jeon says:
====================
nfc: s3fwrn5: Change I2C interrupt trigger to EDGE_RISING
For stable Samsung's I2C interrupt handling, I changed the interrupt
trigger from IRQ_TYPE_LEVEL_HIGH to IRQ_TYPE_EDGE_RISING and removed
the hard coded interrupt trigger type in the i2c module for the flexible
control.
1/2 is the changed dt binding for the edge rising trigger.
2/2 is to remove the hard coded interrupt trigger type in the i2c module.
ChangeLog:
v2:
2/2
- remove the hard coded interrupt trigger type.
Bongsu Jeon (2):
dt-bindings: net: nfc: s3fwrn5: Change I2C interrupt trigger to
EDGE_RISING
nfc: s3fwrn5: Remove hard coded interrupt trigger type from the i2c
module
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Bongsu Jeon [Tue, 8 Dec 2020 14:10:12 +0000 (23:10 +0900)]
nfc: s3fwrn5: Remove hard coded interrupt trigger type from the i2c module
For the flexible control of interrupt trigger type, remove the hard coded
interrupt trigger type in the i2c module. The trigger type will be loaded
from a dts.
Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bongsu Jeon [Tue, 8 Dec 2020 14:10:11 +0000 (23:10 +0900)]
dt-bindings: net: nfc: s3fwrn5: Change I2C interrupt trigger type
Change interrupt trigger from IRQ_TYPE_LEVEL_HIGH to IRQ_TYPE_EDGE_RISING
for stable NFC I2C interrupt handling.
Samsung's NFC Firmware sends an i2c frame as below.
1. NFC Firmware sets the GPIO(interrupt pin) high when there is an i2c
frame to send.
2. If the CPU's I2C master has received the i2c frame, NFC F/W sets the
GPIO low.
NFC driver's i2c interrupt handler would be called in the abnormal case
as the NFC FW task of number 2 is delayed because of other high priority
tasks.
In that case, NFC driver will try to receive the i2c frame but there isn't
any i2c frame to send in NFC.
It would cause an I2C communication problem. This case would hardly happen.
But, I changed the interrupt as a defense code.
If Driver uses the TRIGGER_RISING instead of the LEVEL trigger,
there would be no problem even if the NFC FW task is delayed.
Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Wed, 9 Dec 2020 13:40:03 +0000 (21:40 +0800)]
net: ipa: convert comma to semicolon
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Wed, 9 Dec 2020 13:39:38 +0000 (21:39 +0800)]
net: mv88e6xxx: convert comma to semicolon
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Wed, 9 Dec 2020 13:38:52 +0000 (21:38 +0800)]
net: thunderbolt: convert comma to semicolon
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Wed, 9 Dec 2020 13:38:11 +0000 (21:38 +0800)]
net: usb: convert comma to semicolon
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Wed, 9 Dec 2020 13:37:39 +0000 (21:37 +0800)]
net: freescale: convert comma to semicolon
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Wed, 9 Dec 2020 13:37:16 +0000 (21:37 +0800)]
net: ethernet: ti: convert comma to semicolon
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Wed, 9 Dec 2020 13:36:30 +0000 (21:36 +0800)]
hisilicon/hns3: convert comma to semicolon
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Wed, 9 Dec 2020 13:35:31 +0000 (21:35 +0800)]
hisilicon/hns: convert comma to semicolon
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Wed, 9 Dec 2020 13:34:41 +0000 (21:34 +0800)]
net: mlx5: convert comma to semicolon
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Wed, 9 Dec 2020 13:34:02 +0000 (21:34 +0800)]
net: micrel: convert comma to semicolon
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Wed, 9 Dec 2020 13:32:28 +0000 (21:32 +0800)]
net: rxrpc: convert comma to semicolon
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 10 Dec 2020 00:19:21 +0000 (16:19 -0800)]
Merge branch 'macb-sama7g5'
Claudiu Beznea says:
====================
net: macb: add support for sama7g5
This series adds support for SAMA7G5 Ethernet interfaces: one 10/100Mbps
and one 1Gbps interfaces.
Along with it I also included a fix to disable clocks for SiFive FU540-C000
on failure path of fu540_c000_clk_init().
Thank you,
Claudiu Beznea
Changed in v3:
- use clk_bulk_disable_unprepare in patch 3/8
- corrected clang compilation warning in patch 3/8
- revert changes in macb_clk_init() in patch 3/8
Changes in v2:
- introduced patch "net: macb: add function to disable all macb clocks" and
update patch "net: macb: unprepare clocks in case of failure" accordingly
- collected tags
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Claudiu Beznea [Wed, 9 Dec 2020 13:03:39 +0000 (15:03 +0200)]
net: macb: add support for sama7g5 emac interface
Add support for SAMA7G5 10/100Mbps interface.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Claudiu Beznea [Wed, 9 Dec 2020 13:03:38 +0000 (15:03 +0200)]
net: macb: add support for sama7g5 gem interface
Add support for SAMA7G5 gigabit ethernet interface.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Claudiu Beznea [Wed, 9 Dec 2020 13:03:37 +0000 (15:03 +0200)]
dt-bindings: add documentation for sama7g5 gigabit ethernet interface
Add documentation for SAMA7G5 gigabit ethernet interface.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Claudiu Beznea [Wed, 9 Dec 2020 13:03:36 +0000 (15:03 +0200)]
dt-bindings: add documentation for sama7g5 ethernet interface
Add documentation for SAMA7G5 ethernet interface.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Claudiu Beznea [Wed, 9 Dec 2020 13:03:35 +0000 (15:03 +0200)]
net: macb: unprepare clocks in case of failure
Unprepare clocks in case of any failure in fu540_c000_clk_init().
Fixes:
c218ad559020 ("macb: Add support for SiFive FU540-C000")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Claudiu Beznea [Wed, 9 Dec 2020 13:03:34 +0000 (15:03 +0200)]
net: macb: add function to disable all macb clocks
Add function to disable all macb clocks.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Claudiu Beznea [Wed, 9 Dec 2020 13:03:33 +0000 (15:03 +0200)]
net: macb: add capability to not set the clock rate
SAMA7G5's ethernet IPs TX clock could be provided by its generic clock or
by the external clock provided by the PHY. The internal IP logic divides
properly this clock depending on the link speed. The patch adds a new
capability so that macb_set_tx_clock() to not be called for IPs having
this capability (the clock rate, in case of generic clock, is set at the
boot time via device tree and the driver only enables it).
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Claudiu Beznea [Wed, 9 Dec 2020 13:03:32 +0000 (15:03 +0200)]
net: macb: add userio bits as platform configuration
This is necessary for SAMA7G5 as it uses different values for
PHY interface and also introduces hdfctlen bit.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Tue, 8 Dec 2020 20:47:07 +0000 (21:47 +0100)]
net: sched: incorrect Kconfig dependencies on Netfilter modules
- NET_ACT_CONNMARK and NET_ACT_CTINFO only require conntrack support.
- NET_ACT_IPT only requires NETFILTER_XTABLES symbols, not
IP_NF_IPTABLES. After this patch, NET_ACT_IPT becomes consistent
with NET_EMATCH_IPT. NET_ACT_IPT dependency on IP_NF_IPTABLES predates
Linux-2.6.12-rc2 (initial git repository build).
Fixes:
22a5dc0e5e3e ("net: sched: Introduce connmark action")
Fixes:
24ec483cec98 ("net: sched: Introduce act_ctinfo action")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://lore.kernel.org/r/20201208204707.11268-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 9 Dec 2020 23:26:42 +0000 (15:26 -0800)]
Merge branch 'xdp-redirect-implementation-for-ena-driver'
Shay Agroskin says:
====================
XDP Redirect implementation for ENA driver
ENA is adding XDP Redirect support for its driver and some other
small tweaks.
This series adds the following:
- Make log messages in the driver have a uniform format using
netdev_* function
- Improve code readability
- Add support for XDP Redirect
====================
Link: https://lore.kernel.org/r/20201208180208.26111-1-shayagr@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shay Agroskin [Tue, 8 Dec 2020 18:02:08 +0000 (20:02 +0200)]
net: ena: introduce ndo_xdp_xmit() function for XDP_REDIRECT
This patch implements the ndo_xdp_xmit() net_device function which is
called when a packet is redirected to this driver using an
XDP_REDIRECT directive.
The function receives an array of xdp frames that it needs to xmit.
The TX queues that are used to xmit these frames are the XDP
queues used by the XDP_TX flow. Therefore a lock is added to synchronize
both flows (XDP_TX and XDP_REDIRECT).
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shay Agroskin [Tue, 8 Dec 2020 18:02:07 +0000 (20:02 +0200)]
net: ena: use xdp_return_frame() to free xdp frames
XDP subsystem has a function to free XDP frames and their associated
pages. Using this function would help the driver's XDP implementation to
adjust to new changes in the XDP subsystem in the kernel (e.g.
introduction of XDP MB).
Also, remove 'xdp_rx_page' field from ena_tx_buffer struct since it is
no longer used.
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shay Agroskin [Tue, 8 Dec 2020 18:02:06 +0000 (20:02 +0200)]
net: ena: introduce XDP redirect implementation
This patch adds a partial support for the XDP_REDIRECT directive which
instructs the driver to pass the packet to an interface specified by the
program. The directive is passed to the driver by calling bpf_redirect()
or bpf_redirect_map() functions from the eBPF program.
To lay the ground for integration with the existing XDP TX
implementation the patch removes the redundant page ref count increase
in ena_xdp_xmit_frame() and then decrease in ena_clean_rx_irq(). Instead
it only DMA unmaps descriptors for which XDP TX or REDIRECT directive
was received.
The XDP Redirect support is still missing .ndo_xdp_xmit function
implementation, which allows to redirect packet to an ENA interface,
which would be added in a later patch.
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shay Agroskin [Tue, 8 Dec 2020 18:02:05 +0000 (20:02 +0200)]
net: ena: use xdp_frame in XDP TX flow
Rename the ena_xdp_xmit_buff() function to ena_xdp_xmit_frame() and pass
it an xdp_frame struct instead of xdp_buff.
This change lays the ground for XDP redirect implementation which uses
xdp_frames when 'xmit'ing packets.
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shay Agroskin [Tue, 8 Dec 2020 18:02:04 +0000 (20:02 +0200)]
net: ena: aggregate stats increase into a function
Introduce ena_increase_stat() function to increase statistics by a
certain number.
The function includes the
- lock aquire (on 32bit machines)
- stat increase
- lock release (on 32bit machines)
line sequence that is ubiquitous across the driver.
The function increases a single stat at a time and several stats which
are increased together weren't put into a function to avoid
calling the function several times for each stat which looks bad and
might decrease performance.
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shay Agroskin [Tue, 8 Dec 2020 18:02:03 +0000 (20:02 +0200)]
net: ena: fix coding style nits
This commit fixes two nits, but it does not generate any change to binary
because of the optimization of gcc.
- use `count` instead of `channels->combined_count`
- change return type from `int` to `bool`
Also add spaces and change macro order in OR assignment to make the code
easier to read.
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shay Agroskin [Tue, 8 Dec 2020 18:02:02 +0000 (20:02 +0200)]
net: ena: store values in their appropriate variables types
This patch changes some of the variables types to match the values they
hold. These wrong types fail some of our static checkers that search for
accidental conversions in our driver.
Signed-off-by: Ido Segev <idose@amazon.com>
Signed-off-by: Igor Chauskin <igorch@amazon.com>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shay Agroskin [Tue, 8 Dec 2020 18:02:01 +0000 (20:02 +0200)]
net: ena: add device distinct log prefix to files
ENA logs are adjusted to display the full ENA representation to
distinct each ENA device in case of multiple interfaces.
Using netdev_err/warn and dev_info functions for logging provides
uniform printing with clear distinction of the device and interface.
This patch changes all printing in ena_com files to use netev_* logging
functions except for messages of info level. Log functions of that level
would be printed with dev_info because of the early stage they are
called in when net_device struct isn't yet registered.
To allow using netdev_* functions in all ena_com functions, a pointer to
the net_device was added to ena_com_dev struct.
The patch also adds some log messages to make driver debugging easier.
Signed-off-by: Amit Bernstein <amitbern@amazon.com>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shay Agroskin [Tue, 8 Dec 2020 18:02:00 +0000 (20:02 +0200)]
net: ena: use constant value for net_device allocation
The patch changes the maximum number of RX/TX queues it advertises to
the kernel (via alloc_etherdev_mq()) from a value received from the
device to a constant value which is the minimum between 128 and the
number of CPUs in the system.
By allocating the net_device struct with a constant number of queues,
the driver is able to allocate it at a much earlier stage, before
calling any ena_com functions. This would allow to make all log prints
in ena_com to use netdev_* log functions instead or current pr_* ones.
Note:
netdev_* prints in ena_com functions that are called before
net_device registration in ena_probe() might print messages that are
a bit ugly (with strings like "(unnamed net_device) (uninitialized)").
However we decided to use netdev_* prints in these functions anyway,
for the sake of getting better messages later, when ena_com functions
are called after ena_probe() form other parts of the driver.
See discussion about this decision in [1].
[1] http://www.mail-archive.com/netdev@vger.kernel.org/msg353590.html
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Min Li [Tue, 8 Dec 2020 15:41:57 +0000 (10:41 -0500)]
ptp: clockmatrix: deprecate firmware older than 4.8.7
Add deprecated flag to indicate < v4.8.7.
Fix idtcm_enable_tod() call correct settime().
Signed-off-by: Min Li <min.li.xe@renesas.com>
Link: https://lore.kernel.org/r/1607442117-13661-4-git-send-email-min.li.xe@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Min Li [Tue, 8 Dec 2020 15:41:56 +0000 (10:41 -0500)]
ptp: clockmatrix: Fix non-zero phase_adj is lost after snap
Fix non-zero phase_adj is lost after snap. Use ktime_sub
to do ktime_t subtraction.
Signed-off-by: Min Li <min.li.xe@renesas.com>
Link: https://lore.kernel.org/r/1607442117-13661-3-git-send-email-min.li.xe@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Min Li [Tue, 8 Dec 2020 15:41:55 +0000 (10:41 -0500)]
ptp: clockmatrix: remove 5 second delay before entering write phase mode
Remove write phase mode 5 second setup delay, not needed.
Signed-off-by: Min Li <min.li.xe@renesas.com>
Link: https://lore.kernel.org/r/1607442117-13661-2-git-send-email-min.li.xe@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Min Li [Tue, 8 Dec 2020 15:41:54 +0000 (10:41 -0500)]
ptp: clockmatrix: reset device and check BOOT_STATUS
SM_RESET device only when loading full configuration and check
for BOOT_STATUS. Also remove polling for write trigger done in
_idtcm_settime().
Changes since v1:
-Correct warnings from strict checkpatch
Signed-off-by: Min Li <min.li.xe@renesas.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/1607442117-13661-1-git-send-email-min.li.xe@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrea Mayer [Tue, 8 Dec 2020 17:52:10 +0000 (18:52 +0100)]
vrf: handle CONFIG_IPV6 not set for vrf_add_mac_header_if_unset()
The vrf_add_mac_header_if_unset() is defined within a conditional
compilation block which depends on the CONFIG_IPV6 macro.
However, the vrf_add_mac_header_if_unset() needs to be called also by IPv4
related code and when the CONFIG_IPV6 is not set, this function is missing.
As a consequence, the build process stops reporting the error:
ERROR: implicit declaration of function 'vrf_add_mac_header_if_unset'
The problem is solved by *only* moving functions
vrf_add_mac_header_if_unset() and vrf_prepare_mac_header() out of the
conditional block.
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
0489390882202 ("vrf: add mac header for tunneled packets when sniffer is attached")
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20201208175210.8906-1-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon Perron Caissy [Thu, 17 Sep 2020 20:13:47 +0000 (13:13 -0700)]
ice: Add space to unknown speed
Add space to the end of 'Unknown' string in order to avoid
concatenation with 'bps' string when formatting netdev log message.
Signed-off-by: Simon Perron Caissy <simon.perron.caissy@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jacob Keller [Thu, 17 Sep 2020 20:13:46 +0000 (13:13 -0700)]
ice: join format strings to same line as ice_debug
When printing messages with ice_debug, align the printed string to the
origin line of the message in order to ease debugging and tracking
messages back to their source.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Bruce Allan [Thu, 17 Sep 2020 20:13:45 +0000 (13:13 -0700)]
ice: silence static analysis warning
sparse warns about cast to/from restricted types which is not
an actual problem; silence the warning.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Bruce Allan [Thu, 17 Sep 2020 20:13:44 +0000 (13:13 -0700)]
ice: cleanup misleading comment
The maximum Admin Queue buffer size and NVM shadow RAM sector size are both
4 Kilobytes. Some comments refer to those as 4Kb which can be confused with
4 Kilobits. Update the comments to use the commonly used KB symbol instead.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Nick Nunley [Thu, 17 Sep 2020 20:13:43 +0000 (13:13 -0700)]
ice: Remove vlan_ena from vsi structure
vlan_ena was introduced to track whether VLAN filters are enabled on
the device, but
1) checking for num_vlan > 1 already gives us this information, and is
currently used in this way throughout the code
2) the logic for vlan_ena is broken when multiple VLANs are active
Just remove vlan_ena and use num_vlan instead.
Signed-off-by: Nick Nunley <nicholas.d.nunley@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jeb Cramer [Thu, 17 Sep 2020 20:13:42 +0000 (13:13 -0700)]
ice: Remove gate to OROM init
Remove the gate that prevents the OROM and netlist info from being
populated. The NVM now has the appropriate section for software to
reference the versioning info.
Signed-off-by: Jeb Cramer <jeb.j.cramer@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jeb Cramer [Thu, 17 Sep 2020 20:13:41 +0000 (13:13 -0700)]
ice: Enable Support for FW Override (E82X)
The driver is able to override the firmware when it comes to supporting
a more lenient link mode. This feature was limited to E810 devices. It
is now extended to E82X devices.
Signed-off-by: Jeb Cramer <jeb.j.cramer@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Paul M Stillwell Jr [Thu, 17 Sep 2020 20:13:40 +0000 (13:13 -0700)]
ice: don't always return an error for Get PHY Abilities AQ command
There are times when the driver shouldn't return an error when the Get
PHY abilities AQ command (0x0600) returns an error. Instead the driver
should log that the error occurred and continue on. This allows the
driver to load even though the AQ command failed. The user can then
later determine the reason for the failure and correct it.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>