OSDN Git Service
Colin Ian King [Fri, 11 Oct 2019 17:13:54 +0000 (14:13 -0300)]
media: lm3646: remove redundant assignment to variable rval
The variable rval is being initialized with a value that
is never read and is being re-assigned a little later on. The
assignment is redundant and hence can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Janusz Krzysztofik [Sun, 13 Oct 2019 12:50:50 +0000 (09:50 -0300)]
media: ov6650: Fix arbitrary selection of master clock rate
A hardcoded 12 MHz master clock frequency has been assumed since
conversion of the driver from soc_camera sensor to a standalone V4L2
subdevice by commit
23a52386fabe ("media: ov6650: convert to standalone
v4l2 subdevice"). Fix it.
Define a static table of supported master clock rates (fix misnamed
symbol while being at it), then use v4l2_clk_get/set_rate() to obtain
a clock rate matching one of those supported. On success, apply
respective master clock hardware divisor provided by the matching
element of the table.
[Sakari Ailus: Initialize xclk to NULL.]
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Janusz Krzysztofik [Sun, 13 Oct 2019 12:50:49 +0000 (09:50 -0300)]
media: ov6650: Drop unused .pclk_max field
This field of the driver private structure is no longer used, drop it.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Janusz Krzysztofik [Sun, 13 Oct 2019 12:50:48 +0000 (09:50 -0300)]
media: ov6650: Don't reapply pixel clock divisor on format change
As calculation of pixel clock hardware divisor no longer depends on
mbus format specific maximum pixel clock, there is no need to reapply
the divisor on format change. Drop related code from ov6650_s_fmt()
helper.
Since a master clock hardware divisor, so far applied only together
with the pixel clock divisor in a single operation, will no longer be
applied from ov6650_s_fmt(), apply it, still using a hardcoded value
for now, from ov6650_prog_dflt() helper so hardware is still
initialised correctly on device probe.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Janusz Krzysztofik [Sun, 13 Oct 2019 12:50:47 +0000 (09:50 -0300)]
media: ov6650: Simplify clock divisor calculation
As appears from an analysis of to_clkrc() helper code after its
pclk_limit argument has been dropped, its result no longer depends on
another argument - pclk_max. Moreover, assuming that a constant value
of FRAME_RATE_MAX is always used as a denominator of the only
significant argument left - a struct v4l2_fract, the result in fact
depends only on the numerator value of that argument. As a further
consequence, it no longer makes sense to recalculate frame intervals by
converting them forth and back with a GET_CLKRC_DIV(to_clkrc(tpf))
construct.
Drop use of GET_CLKRC_DIV() on results of to_clkrc() where possible -
use the frame interval value directly. Furthermore, replace the
to_clkrc() helper function with a simple macro and update its users to
always use FRAME_RATE_MAX as frame interval denominator and pass only
its numerator as an argument.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Janusz Krzysztofik [Sun, 13 Oct 2019 12:50:46 +0000 (09:50 -0300)]
media: ov6650: Drop obsolete .pclk_limit attribute
That attribute used to be obtained from platform data by a soc_camera
host interface and passed to the sensor driver for .s_mbus_fmt() video
operation callback, later reused as .set_fmt() pad operation callback,
to be able to limit frame rate. The driver stored that value in its
private structure for further use from .g/s_parm(), later converted to
g/s_frame_interval().
On conversion of the driver from soc_camera sensor to a standalone V4L2
subdevice by commit
23a52386fabe ("media: ov6650: convert to standalone
v4l2 subdevice"), that attribute had been replaced by a constant and
hardcoded to an arbitrarily chosen pixel clock limit. Drop it. Host
interfaces can limit frame rate if needed by calling
.s_frame_interval().
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Janusz Krzysztofik [Sun, 13 Oct 2019 12:50:45 +0000 (09:50 -0300)]
media: ov6650: Fix stored frame interval not in sync with hardware
The driver stores a frame interval value supposed to be in line with
hardware state in a device private structure. Since the driver initial
submission, the respective field of the structure has never been
initialised on device probe. Moreover, if updated from
.s_frame_interval(), a new value is stored before it is applied on
hardware. If an error occurs during device update, the stored value
may no longer reflect hardware state and consecutive calls to
.g_frame_interval() may return incorrect information.
Assuming a failed update of the device means its actual state hasn't
changed, update the frame interval field of the device private
structure with a new value only after it is successfully applied on
hardware so it always reflects actual hardware state to the extent
possible. Also, initialise the field with hardware default frame
interval on device probe.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Sebastian Andrzej Siewior [Tue, 15 Oct 2019 19:18:17 +0000 (16:18 -0300)]
media: cec-gpio: Use CONFIG_PREEMPTION
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT.
Both PREEMPT and PREEMPT_RT require the same functionality which today
depends on CONFIG_PREEMPT.
Switch the Kconfig dependency to CONFIG_PREEMPTION.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Alexandre Courbot [Wed, 16 Oct 2019 09:52:39 +0000 (06:52 -0300)]
media: Documentation: v4l: fix section depth
The request API documentation introduced a new section which should have
been a subsection. Fix this.
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Alexandre Courbot <gnurou@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Fabio Estevam [Tue, 15 Oct 2019 16:00:42 +0000 (13:00 -0300)]
media: imx.rst: Pass the v4l2-ctl configuration
Pass the v4l2-ctl configuration for the imx6q-sabreauto PAL
example for completeness and consistency.
Suggested-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Fabio Estevam [Tue, 15 Oct 2019 16:00:41 +0000 (13:00 -0300)]
media: imx.rst: Provide instructions for the i.MX6DL sabreauto
The i.MX6DL sabreauto has different numbering on the I2C bus and
I2C muxes compared to the i.MX6Q as shown in the kernel log below:
[ 5.159423] imx-media: ipu1_csi0_mux:5 -> ipu1_csi0:0
[ 5.164618] imx-media: ipu1_csi1_mux:5 -> ipu1_csi1:0
[ 5.169953] imx-media: adv7180 4-0021:0 -> ipu1_csi0_mux:4
To avoid confusion, add an entry that shows how to setup the links and
configure the pads that are specific to the i.MX6DL sabreauto.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Fabio Estevam [Tue, 15 Oct 2019 16:00:40 +0000 (13:00 -0300)]
media: imx.rst: Provide a real example for the output format
In the i.MX6Q sabreauto pipeline example, it is better to provide
a real example for the output format, so do it just like in the
previous lines for consistency.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Fabio Estevam [Tue, 15 Oct 2019 16:00:39 +0000 (13:00 -0300)]
media: imx.rst: Specify the sabreauto variant
Improve the documentation by specifying that the instructions
are related to the i.MX6Q sabreauto variant.
This avoids confusion if someone follows these steps on a i.MX6DL
sabreauto, which has different numbering on the I2C bus and
I2C muxes.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Christophe JAILLET [Fri, 11 Oct 2019 20:48:29 +0000 (17:48 -0300)]
media: i2c: adv7842: make array cri static and const, makes object smaller
Don't populate the array 'cri' on the stack but instead make it
static and const. Makes the object code smaller by 165 bytes.
Turn the 2nd parameter of 'log_infoframe()' const accordingly.
Before:
text data bss dec hex filename
98533 20024 256 118813 1d01d drivers/media/i2c/adv7842.o
After:
text data bss dec hex filename
98304 20088 256 118648 1cf78 drivers/media/i2c/adv7842.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Colin Ian King [Fri, 11 Oct 2019 18:57:46 +0000 (15:57 -0300)]
media: gspca: remove redundant assignment to variable ret
The variable ret is being initialized with a value that
is never read and is being re-assigned a little later on. The
assignment is redundant and hence can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Colin Ian King [Fri, 11 Oct 2019 13:29:40 +0000 (10:29 -0300)]
media: ti-vpe: vpe: use r2y instead of y2r, copy-paste error
There appears to be a copy-paste error on the access of
csc_coeffs.y2r.r601.full.coeff, I believe csc_coeffs.2yr.r601.full.coeff
should be used instead. This is a moot point as the code is never
reached, but at least use the correct structure element.
Addresses-Coverity: ("Copy-paste error")
Fixes:
3ff3a712a9ea ("media: ti-vpe: vpe: don't rely on colorspace member for conversion")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Fabio Estevam [Fri, 11 Oct 2019 10:49:19 +0000 (07:49 -0300)]
media: adv7180: Only print 'chip found' message on successful probe
Currently the "chip found" message is shown even in the case where the
I2C address is wrongly passed in the device tree, or also in the case of
probe failure, which is misleading.
To avoid such problem, move this message after real I2C transactions
have been successfully made and we are certain that the adv7180 is
really present and probed.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Navid Emamdoost [Wed, 9 Oct 2019 15:01:47 +0000 (12:01 -0300)]
media: usb: fix memory leak in af9005_identify_state
In af9005_identify_state when returning -EIO the allocated buffer should
be released. Replace the "return -EIO" with assignment into ret and move
deb_info() under a check.
Fixes:
af4e067e1dcf ("V4L/DVB (5625): Add support for the AF9005 demodulator from Afatech")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Wed, 9 Oct 2019 14:49:19 +0000 (11:49 -0300)]
media: cec-pin: add 'received' callback
Drivers that use the CEC pin framework have no way of processing messages
themselves by providing the 'received' callback. This is present in
cec_ops, but not in cec_pin_ops.
Add support for this callback.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Jae Hyun Yoo [Thu, 26 Sep 2019 22:27:43 +0000 (19:27 -0300)]
media: aspeed: clear garbage interrupts
CAPTURE_COMPLETE and FRAME_COMPLETE interrupts come even when these
are disabled in the VE_INTERRUPT_CTRL register and eventually this
behavior causes disabling irq itself like below:
[10055.108784] irq 23: nobody cared (try booting with the "irqpoll" option)
[10055.115525] CPU: 0 PID: 331 Comm: swampd Tainted: G W 5.3.0-
4fde000-dirty-
d683e2e #1
[10055.124565] Hardware name: Generic DT based system
[10055.129355] Backtrace:
[10055.131854] [<
80107d7c>] (dump_backtrace) from [<
80107fb0>] (show_stack+0x20/0x24)
[10055.139431] r7:
00000017 r6:
00000001 r5:
00000000 r4:
9d51dc00
[10055.145120] [<
80107f90>] (show_stack) from [<
8074bf50>] (dump_stack+0x20/0x28)
[10055.152361] [<
8074bf30>] (dump_stack) from [<
80150ffc>] (__report_bad_irq+0x40/0xc0)
[10055.160109] [<
80150fbc>] (__report_bad_irq) from [<
80150f2c>] (note_interrupt+0x23c/0x294)
[10055.168374] r9:
015b6e60 r8:
00000000 r7:
00000017 r6:
00000001 r5:
00000000 r4:
9d51dc00
[10055.176136] [<
80150cf0>] (note_interrupt) from [<
8014df1c>] (handle_irq_event_percpu+0x88/0x98)
[10055.184835] r10:
7eff7910 r9:
015b6e60 r8:
00000000 r7:
9d417600 r6:
00000001 r5:
00000002
[10055.192657] r4:
9d51dc00 r3:
00000000
[10055.196248] [<
8014de94>] (handle_irq_event_percpu) from [<
8014df64>] (handle_irq_event+0x38/0x4c)
[10055.205113] r5:
80b56d50 r4:
9d51dc00
[10055.208697] [<
8014df2c>] (handle_irq_event) from [<
80151f1c>] (handle_level_irq+0xbc/0x12c)
[10055.217037] r5:
80b56d50 r4:
9d51dc00
[10055.220623] [<
80151e60>] (handle_level_irq) from [<
8014d4b8>] (generic_handle_irq+0x30/0x44)
[10055.229052] r5:
80b56d50 r4:
00000017
[10055.232648] [<
8014d488>] (generic_handle_irq) from [<
8014d524>] (__handle_domain_irq+0x58/0xb4)
[10055.241356] [<
8014d4cc>] (__handle_domain_irq) from [<
801021e4>] (avic_handle_irq+0x68/0x70)
[10055.249797] r9:
015b6e60 r8:
00c5387d r7:
00c5387d r6:
ffffffff r5:
9dd33fb0 r4:
9d402380
[10055.257539] [<
8010217c>] (avic_handle_irq) from [<
80101e34>] (__irq_usr+0x54/0x80)
[10055.265105] Exception stack(0x9dd33fb0 to 0x9dd33ff8)
[10055.270152] 3fa0:
015d0530 00000000 00000000 015d0538
[10055.278328] 3fc0:
015d0530 015b6e60 00000000 00000000 0052c5d0 015b6e60 7eff7910 7eff7918
[10055.286496] 3fe0:
76ce5614 7eff7908 0050e2f4 76a3a08c 20000010 ffffffff
[10055.293104] r5:
20000010 r4:
76a3a08c
[10055.296673] handlers:
[10055.298967] [<
79f218a5>] irq_default_primary_handler threaded [<
1de88514>] aspeed_video_irq
[10055.307344] Disabling IRQ #23
To fix this issue, this commit makes the interrupt handler clear
these garbage interrupts. This driver enables and uses only
COMP_COMPLETE interrupt instead for frame handling.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@intel.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Jae Hyun Yoo [Fri, 13 Sep 2019 18:11:05 +0000 (15:11 -0300)]
media: aspeed: set hsync and vsync polarities to normal before starting mode detection
Sometimes it detects a weird resolution such as 1024x287 when the
actual resolution is 1024x768. To resolve such an issue, this
commit adds clearing for hsync and vsync polarity register bits
at the beginning of the first mode detection. This is recommended
in the datasheet.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Jae Hyun Yoo [Fri, 13 Sep 2019 18:11:04 +0000 (15:11 -0300)]
media: aspeed: refine hsync/vsync polarity setting logic
To prevent inaccurate detections of resolution, this commit enables
clearing of hsync/vsync polarity bits based on probed sync state.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Paul Kocialkowski [Tue, 22 Oct 2019 15:26:54 +0000 (12:26 -0300)]
media: cedrus: Add HEVC/H.265 decoding support
This introduces support for HEVC/H.265 to the Cedrus VPU driver, with
both uni-directional and bi-directional prediction modes supported.
Field-coded (interlaced) pictures, custom quantization matrices and
10-bit output are not supported at this point.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Paul Kocialkowski [Tue, 22 Oct 2019 15:26:53 +0000 (12:26 -0300)]
media: pixfmt: Document the HEVC slice pixel format
Document the current state of the HEVC slice pixel format.
The format will need to evolve in the future, which is why it is
not part of the public API.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Paul Kocialkowski [Tue, 22 Oct 2019 15:26:52 +0000 (12:26 -0300)]
media: v4l: Add definitions for HEVC stateless decoding
This introduces the required definitions for HEVC decoding support with
stateless VPUs. The controls associated to the HEVC slice format provide
the required meta-data for decoding slices extracted from the bitstream.
They are not exported to the public V4L2 API since reworking this API
will likely be needed for covering various use-cases and new hardware.
Multi-slice decoding is exposed as a valid decoding mode to match current
H.264 support but it is not yet implemented.
The interface comes with the following limitations:
* No custom quantization matrices (scaling lists);
* Support for a single temporal layer only;
* No slice entry point offsets support;
* No conformance window support;
* No VUI parameters support;
* No support for SPS extensions: range, multilayer, 3d, scc, 4 bits;
* No support for PPS extensions: range, multilayer, 3d, scc, 4 bits.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
[hverkuil-cisco@xs4all.nl: use 1ULL in flags defines in hevc-ctrls.h]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Paul Kocialkowski [Tue, 22 Oct 2019 15:26:51 +0000 (12:26 -0300)]
media: cedrus: Remove unnecessary parenthesis around DIV_ROUND_UP
DIV_ROUND_UP's first argument doesn't need to be wrapped in parenthesis
since that is already being taken care of in the macro's definition.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Paul Kocialkowski [Tue, 22 Oct 2019 15:26:50 +0000 (12:26 -0300)]
media: cedrus: Fix undefined shift with a SHIFT_AND_MASK_BITS macro
We need to shift and mask values at different occasions to fill up
cedrus registers. This was done using macros that don't explicitly
treat arguments as unsigned, leading to possibly undefined behavior.
Introduce the SHIFT_AND_MASK_BITS macro and use it where possible.
In cases where it doesn't apply as-is, explicitly cast to unsigned
instead.
This macro should be moved to include/linux/bits.h eventually.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Vandana BN [Tue, 15 Oct 2019 10:40:17 +0000 (07:40 -0300)]
media: vivid: Add metadata output support
Support metadata output in vivid driver.
Metadata output is used to set brightness, contrast, saturation
and hue.
Adds new files for metadata output.
Signed-off-by: Vandana BN <bnvandana@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Vandana BN [Tue, 15 Oct 2019 10:40:16 +0000 (07:40 -0300)]
media: v4l2-core: Add new metadata format
Add new metadata format to support metadata output in vivid.
Signed-off-by: Vandana BN <bnvandana@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Vandana BN [Thu, 17 Oct 2019 06:43:08 +0000 (03:43 -0300)]
media: Documentation:media:v4l2:Add vivid metadata doc
Adds new file for describing new metadata format V4L2_META_FMT_VIVID added in vivid driver.
Signed-off-by: Vandana BN <bnvandana@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Vandana BN [Tue, 15 Oct 2019 10:40:15 +0000 (07:40 -0300)]
media: vivid: Add metadata capture support
This patch adds meatadata capture support in vivid driver.
Adds new files for metadata capture.
Adds vivid controls to generate PTS and SCR for metadata stream.
also fixes v4l2-compliance issues seen on metadata device.
Signed-off-by: Vandana BN <bnvandana@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Mon, 14 Oct 2019 12:01:05 +0000 (09:01 -0300)]
media: v4l2-dev: disable frequency and tuner ioctls for touch
Touch devices have obviously no tuner, so don't attempt to enable those
ioctls for such devices.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Mon, 14 Oct 2019 08:40:21 +0000 (05:40 -0300)]
media: v4l2-dev: fix is_tch checks
Touch devices mark too many ioctls as valid. Restrict the list of
valid ioctls for touch devices.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Mon, 14 Oct 2019 08:40:20 +0000 (05:40 -0300)]
media: v4l2-dev: simplify the SDR checks
In determine_valid_ioctls() we can use SET_VALID_IOCTL to enable
ioctls for SDR, simplifying the code.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Vandana BN [Mon, 14 Oct 2019 08:40:19 +0000 (05:40 -0300)]
media: v4l2-core: correctly validate video and metadata ioctls
If the type is VFL_TYPE_GRABBER, then also check device_caps
to see if the video device supports video and/or metadata and
disable unneeded ioctls.
Without this change, format ioctls for both video and metadata devices
could be called on both device nodes. This is true for other ioctls as
well, even if the device supports only video or metadata.
Metadata devices act similar to VBI devices w.r.t. which ioctls should
be enabled. This makes sense since VBI *is* metadata.
Signed-off-by: Vandana BN <bnvandana@gmail.com>
Co-developed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Alexandre Courbot [Thu, 15 Aug 2019 14:44:55 +0000 (11:44 -0300)]
media: docs-rst: Document m2m stateless video decoder interface
Documents the protocol that user-space should follow when
communicating with stateless video decoders.
The stateless video decoding API makes use of the new request and tags
APIs. While it has been implemented with the Cedrus driver so far, it
should probably still be considered staging for a short while.
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Jernej Skrabec [Fri, 11 Oct 2019 09:32:45 +0000 (06:32 -0300)]
media: cedrus: h264: Support multiple slices per frame
With recent changes, support for decoding multi-slice frames can be
easily added now.
Signal VPU if current slice is first in frame or not and add information
about first macroblock coordinates.
When frame contains multiple slices and driver works in slice mode, it's
more efficient to hold capture buffer in queue until all slices of a
same frame are decoded.
Add support for that to Cedrus driver by exposing and implementing
V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF capability.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
[hverkuil-cisco@xs4all.nl: rewritten to use v4l2_m2m_buf_done_and_job_finish]
[hverkuil-cisco@xs4all.nl: removed unnecessary (u32) cast]
[hverkuil-cisco@xs4all.nl: use new_frame v4l2_m2m_ctx bool]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Fri, 11 Oct 2019 09:32:44 +0000 (06:32 -0300)]
media: v4l2-mem2mem: add new_frame detection
Drivers that support VB2_V4L2_FL_SUPPORTS_M2M_HOLD_CAPTURE_BUF
typically want to know if a new frame is started (i.e. the first
slice is about to be processed). Add a new_frame bool to v4l2_m2m_ctx
and set it accordingly.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Jernej Skrabec [Fri, 11 Oct 2019 09:32:43 +0000 (06:32 -0300)]
media: v4l2-mem2mem: add stateless_(try_)decoder_cmd ioctl helpers
These helpers are used by stateless codecs when they support multiple
slices per frame and hold capture buffer flag is set. It's expected that
all such codecs will use this code.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Co-developed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Fri, 11 Oct 2019 09:32:42 +0000 (06:32 -0300)]
media: videodev2.h: add V4L2_DEC_CMD_FLUSH
Add this new V4L2_DEC_CMD_FLUSH decoder command and document it.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Fri, 11 Oct 2019 09:32:41 +0000 (06:32 -0300)]
media: v4l2-mem2mem: support held capture buffers
Check for held buffers that are ready to be returned to vb2 in
__v4l2_m2m_try_queue(). This avoids drivers having to handle this
case.
Add v4l2_m2m_buf_done_and_job_finish() to correctly return source
and destination buffers and mark the job as finished while taking
a held destination buffer into account (i.e. that buffer won't be
returned). This has to be done while job_spinlock is held to avoid
race conditions.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Fri, 11 Oct 2019 09:32:40 +0000 (06:32 -0300)]
media: vb2: add V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF
This patch adds support for the V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF
flag.
It also adds a new V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF
capability.
Drivers should set vb2_queue->subsystem_flags to
VB2_V4L2_FL_SUPPORTS_M2M_HOLD_CAPTURE_BUF to indicate support
for this flag.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hariprasad Kelam [Tue, 8 Oct 2019 06:55:51 +0000 (03:55 -0300)]
media: staging: media: Make use of devm_platform_ioremap_resource
Fix below issue reported by coccicheck
drivers/staging//media/omap4iss/iss.c:915:1-15: WARNING: Use
devm_platform_ioremap_resource for iss -> regs [ res ]
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Nachammai Karuppiah [Wed, 2 Oct 2019 11:02:35 +0000 (08:02 -0300)]
media: staging: media: omap4iss: Replace NULL comparison.
This patch modifies NULL comparison to fix checkpatch.pl warning.
Signed-off-by: Nachammai Karuppiah <nachukannan@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Christophe JAILLET [Wed, 24 Jul 2019 04:56:12 +0000 (01:56 -0300)]
media: uvcvideo: Fix a typo in UVC_METATADA_BUF_SIZE
It is likely that it should be UVC_METADATA_BUF_SIZE instead.
Fix it and use it.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Laurent Pinchart [Tue, 30 Jul 2019 02:14:55 +0000 (23:14 -0300)]
media: uvcvideo: Fix error path in control parsing failure
When parsing the UVC control descriptors fails, the error path tries to
cleanup a media device that hasn't been initialised, potentially
resulting in a crash. Fix this by initialising the media device before
the error handling path can be reached.
Fixes:
5a254d751e52 ("[media] uvcvideo: Register a v4l2_device")
Reported-by: syzbot+c86454eb3af9e8a4da20@syzkaller.appspotmail.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Mauro Carvalho Chehab [Sun, 6 Oct 2019 12:48:23 +0000 (09:48 -0300)]
media: cxd2841er: avoid too many status inquires
I2C ops are expensive, as the I2C bus typical speed is 100kbps.
Also, stats reading take some time, as it requires to retrieve a
certain number of packets to complete.
While we don't know the minimal for CXD2841er, trying to do it
too quickly is still a very bad idea.
So, add some sanity logic there, preventing to retrieve stats
faster than one second.
This shouldn't cause any issues with well behavior apps, as they
usually take stats on a polling rate slower than 1 second.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Mauro Carvalho Chehab [Fri, 4 Oct 2019 11:42:47 +0000 (08:42 -0300)]
media: mb86a20s: make the bit rate estimation function more generic
While 99% of the implementation of the bitrate estimation
routine for ISDB-T is generic, the current approach mangles it
with some mb86a20s-specific thing.
Split the calculus from the specific stuff, in order to make
easier to use the same approach on other drivers requiring
a similar formula.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Vito Caputo [Mon, 14 Oct 2019 02:08:45 +0000 (23:08 -0300)]
media: cxusb: detect cxusb_ctrl_msg error in query
Don't use uninitialized ircode[] in cxusb_rc_query() when
cxusb_ctrl_msg() fails to populate its contents.
syzbot reported:
dvb-usb: bulk message failed: -22 (1/-30591)
=====================================================
BUG: KMSAN: uninit-value in ir_lookup_by_scancode drivers/media/rc/rc-main.c:494 [inline]
BUG: KMSAN: uninit-value in rc_g_keycode_from_table drivers/media/rc/rc-main.c:582 [inline]
BUG: KMSAN: uninit-value in rc_keydown+0x1a6/0x6f0 drivers/media/rc/rc-main.c:816
CPU: 1 PID: 11436 Comm: kworker/1:2 Not tainted 5.3.0-rc7+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events dvb_usb_read_remote_control
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x191/0x1f0 lib/dump_stack.c:113
kmsan_report+0x13a/0x2b0 mm/kmsan/kmsan_report.c:108
__msan_warning+0x73/0xe0 mm/kmsan/kmsan_instr.c:250
bsearch+0x1dd/0x250 lib/bsearch.c:41
ir_lookup_by_scancode drivers/media/rc/rc-main.c:494 [inline]
rc_g_keycode_from_table drivers/media/rc/rc-main.c:582 [inline]
rc_keydown+0x1a6/0x6f0 drivers/media/rc/rc-main.c:816
cxusb_rc_query+0x2e1/0x360 drivers/media/usb/dvb-usb/cxusb.c:548
dvb_usb_read_remote_control+0xf9/0x290 drivers/media/usb/dvb-usb/dvb-usb-remote.c:261
process_one_work+0x1572/0x1ef0 kernel/workqueue.c:2269
worker_thread+0x111b/0x2460 kernel/workqueue.c:2415
kthread+0x4b5/0x4f0 kernel/kthread.c:256
ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:355
Uninit was stored to memory at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:150 [inline]
kmsan_internal_chain_origin+0xd2/0x170 mm/kmsan/kmsan.c:314
__msan_chain_origin+0x6b/0xe0 mm/kmsan/kmsan_instr.c:184
rc_g_keycode_from_table drivers/media/rc/rc-main.c:583 [inline]
rc_keydown+0x2c4/0x6f0 drivers/media/rc/rc-main.c:816
cxusb_rc_query+0x2e1/0x360 drivers/media/usb/dvb-usb/cxusb.c:548
dvb_usb_read_remote_control+0xf9/0x290 drivers/media/usb/dvb-usb/dvb-usb-remote.c:261
process_one_work+0x1572/0x1ef0 kernel/workqueue.c:2269
worker_thread+0x111b/0x2460 kernel/workqueue.c:2415
kthread+0x4b5/0x4f0 kernel/kthread.c:256
ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:355
Local variable description: ----ircode@cxusb_rc_query
Variable was created at:
cxusb_rc_query+0x4d/0x360 drivers/media/usb/dvb-usb/cxusb.c:543
dvb_usb_read_remote_control+0xf9/0x290 drivers/media/usb/dvb-usb/dvb-usb-remote.c:261
Signed-off-by: Vito Caputo <vcaputo@pengaru.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Jisheng Zhang [Fri, 11 Oct 2019 08:25:20 +0000 (05:25 -0300)]
media: rc-map: Sort rc map name MACROs
Some MACROS such as RC_MAP_SU3000 and RC_MAP_HAUPPAUGE are not
alphabetically sorted. Sort names alphabetically.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Christian Hewitt [Fri, 11 Oct 2019 19:43:42 +0000 (16:43 -0300)]
media: rc: add keymap for Tronsmart Vega S95/S96 remote
Add a keymap for the Tronsmart Vega S95 and S96 Android (Amlogic S905/S912)
STB devices. Both use the same IR remote.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
zhong jiang [Wed, 9 Oct 2019 14:55:23 +0000 (11:55 -0300)]
media: tuners/qm1d1c0042: Use DIV_ROUND_CLOSEST directly to make it readable
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d
but is perhaps more readable.
Signed-off-by: Zhong Jiang <zhongjiang@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
zhong jiang [Wed, 9 Oct 2019 14:55:22 +0000 (11:55 -0300)]
media: dvb-frontends: Use DIV_ROUND_CLOSEST directly to make it readable
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d
but is perhaps more readable.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Sean Young [Mon, 7 Oct 2019 10:36:45 +0000 (07:36 -0300)]
media: imon_raw: simplify loop
The code for pulse and space is the same so remove duplication.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Thomas Voegtle [Wed, 2 Oct 2019 17:26:03 +0000 (14:26 -0300)]
media: dvbsky: add support for eyeTV Geniatech T2 lite
Adds USB ID for the eyeTV Geniatech T2 lite to the dvbsky driver.
This is a Geniatech T230C based stick without IR and a different USB ID.
Signed-off-by: Thomas Voegtle <tv@lio96.de>
Tested-by: Jan Pieter van Woerkom <jp@jpvw.nl>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Mon, 7 Oct 2019 15:10:09 +0000 (12:10 -0300)]
media: ti-vpe: vpe: don't rely on colorspace member for conversion
Up to now VPE was relying on the colorspace value of struct v4l2_format
as an indication to perform color space conversion from YUV to RGB or
not.
Instead we should used the source/destination fourcc codes as a more
reliable indication to perform color space conversion or not.
To do so, we rework the csc module to use "struct v4l2_format *" as
parameters, and reorganize the coefficients tables in a more logical
way.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Mon, 7 Oct 2019 15:10:08 +0000 (12:10 -0300)]
media: v4l2-common: add RGB565 and RGB55 to v4l2_format_info
Add RGB565 and RGB555 to the v4l2_format_info table.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Mon, 7 Oct 2019 15:10:07 +0000 (12:10 -0300)]
media: v4l2-common: add pixel encoding support
It is often useful to figure out if a pixel_format is either YUV or RGB
especially for driver who can perform the pixel encoding conversion.
Instead of having each driver implement its own "is_this_yuv/rgb"
function based on a restricted set of pixel value, it is better to do
this in centralized manner.
We therefore add a pixel_enc member to the v4l2_format_info structure to
quickly identify the related pixel encoding.
And add helper functions to check pixel encoding.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Mon, 7 Oct 2019 15:10:06 +0000 (12:10 -0300)]
media: ti-vpe: csc: rgb-to-yuv HD full range coeff are wrong
The RGB to YUV HD full range coefficients did not match the TRM values
and appeared to be a cut-n-paste from the YUV to RGB section.
Replace the entries with the values from the TRM.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Mon, 7 Oct 2019 15:10:05 +0000 (12:10 -0300)]
media: ti-vpe: vpe: fix v4l2_compliance issue related to xfer_func
All 4 of the "colorspace" components were not originally handled.
Causing issue related to xfer_func not being initialized properly.
This was found with v4l2-compliance test.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Mon, 7 Oct 2019 15:10:04 +0000 (12:10 -0300)]
media: ti-vpe: vpe: use standard struct instead of duplicating fields
For each queue we need to maintain resolutions, pixel format,
bytesperline, sizeimage, colorspace, etc.
Instead of manually adding more entries in the vpe_q_data struct, it is
better to just add a "struct v4l2_format" member and use that to store
all needed information.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
[hverkuil@xs4all.nl: fix checkpatch warning]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Mon, 7 Oct 2019 15:10:03 +0000 (12:10 -0300)]
media: ti-vpe: Set the DMA mask and coherent mask
VPE uses VPDMA (built-in dma engine) to transfer data to and from the IP
and memory. VPDMA expect 32 bits addresses. To make sure that is always
the case set the DMA mask and coherent mask for the device.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Mon, 7 Oct 2019 15:10:02 +0000 (12:10 -0300)]
media: ti-vpe: vpdma: Use fixed type for address in descriptor
Using dma_addr_t as the type to hold address inside of a fix sized
descriptor used by the vpdma firmware is prone to fail when the expected
width is 32 bits and suddenly when CONFIG_LPAE is enabled the data size
is now 64 bits shifted the remaining members of the descriptor in memory
which confuses the firmware.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Mon, 7 Oct 2019 15:10:01 +0000 (12:10 -0300)]
media: ti-vpe: vpe: ensure buffers are cleaned up properly in abort cases
v4l2-compliance fails with this message:
fail: v4l2-test-buffers.cpp(691): ret == 0
fail: v4l2-test-buffers.cpp(974): captureBufs(node, q, m2m_q,
frame_count, true)
test MMAP: FAIL
This caused the following Kernel Warning:
WARNING: CPU: 0 PID: 961 at
drivers/media/v4l2-core/videobuf2-core.c:1658
__vb2_queue_cancel+0x174/0x1d8
...
CPU: 0 PID: 961 Comm: v4l2-compliance Not tainted
4.14.62-01720-g20ecd717e87a #6
Hardware name: Generic DRA72X (Flattened Device Tree)
Backtrace:
[<
c020b5bc>] (dump_backtrace) from [<
c020b8a0>] (show_stack+0x18/0x1c)
r7:
00000009 r6:
60070013 r5:
00000000 r4:
c1053824
[<
c020b888>] (show_stack) from [<
c09232e8>] (dump_stack+0x90/0xa4)
[<
c0923258>] (dump_stack) from [<
c022b740>] (__warn+0xec/0x104)
r7:
00000009 r6:
c0c0ad50 r5:
00000000 r4:
00000000
[<
c022b654>] (__warn) from [<
c022b810>] (warn_slowpath_null+0x28/0x30)
r9:
00000008 r8:
00000000 r7:
eced4808 r6:
edbc9bac r5:
eced4844
r4:
eced4808
[<
c022b7e8>] (warn_slowpath_null) from [<
c0726f48>]
(__vb2_queue_cancel+0x174/0x1d8)
[<
c0726dd4>] (__vb2_queue_cancel) from [<
c0727648>]
(vb2_core_queue_release+0x20/0x40)
r10:
ecc7bd70 r9:
00000008 r8:
00000000 r7:
edb73010 r6:
edbc9bac
r5:
eced4844
r4:
eced4808 r3:
00000004
[<
c0727628>] (vb2_core_queue_release) from [<
c0729528>]
(vb2_queue_release+0x10/0x14)
r5:
edbc9810 r4:
eced4800
[<
c0729518>] (vb2_queue_release) from [<
c0724d08>]
(v4l2_m2m_ctx_release+0x1c/0x30)
[<
c0724cec>] (v4l2_m2m_ctx_release) from [<
bf0e8f28>]
(vpe_release+0x74/0xb0 [ti_vpe])
r5:
edbc9810 r4:
ed67a400
[<
bf0e8eb4>] (vpe_release [ti_vpe]) from [<
c070fccc>]
(v4l2_release+0x3c/0x80)
r7:
edb73010 r6:
ed176aa0 r5:
edbc9868 r4:
ed5119c0
[<
c070fc90>] (v4l2_release) from [<
c033cf1c>] (__fput+0x8c/0x1dc)
r5:
ecc7bd70 r4:
ed5119c0
[<
c033ce90>] (__fput) from [<
c033d0cc>] (____fput+0x10/0x14)
r10:
00000000 r9:
ed5119c0 r8:
ece392d0 r7:
c1059544 r6:
ece38d80
r5:
ece392b4
r4:
00000000
[<
c033d0bc>] (____fput) from [<
c0246e00>] (task_work_run+0x98/0xb8)
[<
c0246d68>] (task_work_run) from [<
c022f1d8>] (do_exit+0x170/0xa80)
r9:
ece351fc r8:
00000000 r7:
ecde3f58 r6:
ffffe000 r5:
ece351c0
r4:
ece38d80
[<
c022f068>] (do_exit) from [<
c022fb6c>] (do_group_exit+0x48/0xc4)
r7:
000000f8
[<
c022fb24>] (do_group_exit) from [<
c022fc00>]
(__wake_up_parent+0x0/0x28)
r7:
000000f8 r6:
b6c6a798 r5:
00000001 r4:
00000001
[<
c022fbe8>] (SyS_exit_group) from [<
c0207c80>]
(ret_fast_syscall+0x0/0x4c)
These warnings are caused by buffers which not properly cleaned
up/release during an abort use case.
In the abort cases the VPDMA desc buffers would still be mapped and the
in-flight VB2 buffers would not be released properly causing a kernel
warning from being generated by the videobuf2-core level.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Mon, 7 Oct 2019 15:10:00 +0000 (12:10 -0300)]
media: ti-vpe: vpe: fix a v4l2-compliance failure about frame sequence number
v4l2-compliance fails with this message:
fail: v4l2-test-buffers.cpp(294): \
(int)g_sequence() < seq.last_seq + 1
fail: v4l2-test-buffers.cpp(740): \
buf.check(m2m_q, last_m2m_seq)
fail: v4l2-test-buffers.cpp(974): \
captureBufs(node, q, m2m_q, frame_count, true)
test MMAP: FAIL
The driver is failing to update the source frame sequence number in the
vb2 buffer object. Only the destination frame sequence was being
updated.
This is only a reporting issue if the user space app actually cares
about the frame sequence number. But it is fixed nonetheless.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Mon, 7 Oct 2019 15:09:59 +0000 (12:09 -0300)]
media: ti-vpe: vpe: fix a v4l2-compliance failure about invalid sizeimage
v4l2-compliance fails with this message:
fail: v4l2-test-formats.cpp(463): !pfmt.sizeimage
fail: v4l2-test-formats.cpp(736): \
Video Capture Multiplanar is valid, \
but TRY_FMT failed to return a format
test VIDIOC_TRY_FMT: FAIL
This failure is causd by the driver failing to handle out range
'bytesperline' values from user space applications.
VPDMA hardware is limited to 64k line stride (16 bytes aligned, so 65520
bytes). So make sure the provided or calculated 'bytesperline' is
smaller than the maximum value.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Mon, 7 Oct 2019 15:09:58 +0000 (12:09 -0300)]
media: ti-vpe: vpe: Make sure YUYV is set as default format
v4l2-compliance fails with this message:
fail: v4l2-test-formats.cpp(672): \
Video Capture Multiplanar: TRY_FMT(G_FMT) != G_FMT
fail: v4l2-test-formats.cpp(672): \
Video Output Multiplanar: TRY_FMT(G_FMT) != G_FMT
...
test VIDIOC_TRY_FMT: FAIL
The default pixel format was setup as pointing to a specific offset in
the vpe_formats table assuming it was pointing to the V4L2_PIX_FMT_YUYV
entry. This became false after the addition on the NV21 format (see
above commid-id)
So instead of hard-coding an offset which might change over time we need
to use a lookup helper instead so we know the default will always be what
we intended.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Fixes:
40cc823f7005 ("media: ti-vpe: Add support for NV21 format")
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Mon, 7 Oct 2019 15:09:57 +0000 (12:09 -0300)]
media: ti-vpe: vpe: fix a v4l2-compliance warning about invalid pixel format
v4l2-compliance warns with this message:
warn: v4l2-test-formats.cpp(717): \
TRY_FMT cannot handle an invalid pixelformat.
warn: v4l2-test-formats.cpp(718): \
This may or may not be a problem. For more information see:
warn: v4l2-test-formats.cpp(719): \
http://www.mail-archive.com/linux-media@vger.kernel.org/msg56550.html
...
test VIDIOC_TRY_FMT: FAIL
We need to make sure that the returns a valid pixel format in all
instance. Based on the v4l2 framework convention drivers must return a
valid pixel format when the requested pixel format is either invalid or
not supported.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Mon, 7 Oct 2019 15:09:56 +0000 (12:09 -0300)]
media: ti-vpe: vpe: fix a v4l2-compliance failure causing a kernel panic
v4l2-compliance fails with this message:
warn: v4l2-test-formats.cpp(717): \
TRY_FMT cannot handle an invalid pixelformat.
test VIDIOC_TRY_FMT: FAIL
This causes the following kernel panic:
Unable to handle kernel paging request at virtual address
56595561
pgd =
ecd80e00
*pgd=
00000000
Internal error: Oops: 205 [#1] PREEMPT SMP ARM
...
CPU: 0 PID: 930 Comm: v4l2-compliance Not tainted \
4.14.62-01715-gc8cd67f49a19 #1
Hardware name: Generic DRA72X (Flattened Device Tree)
task:
ece44d80 task.stack:
ecc6e000
PC is at __vpe_try_fmt+0x18c/0x2a8 [ti_vpe]
LR is at 0x8
Because the driver fails to properly check the 'num_planes' values for
proper ranges it ends up accessing out of bound data causing the kernel
panic.
Since this driver only handle single or dual plane pixel format, make
sure the provided value does not exceed 2 planes.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Ram Prasad [Mon, 7 Oct 2019 15:09:55 +0000 (12:09 -0300)]
media: ti-vpe: Set MAX height supported to 2048 pixels
VPE's max height supported MAX_H is set to 1184 which is the
padded height from VC1 decoder output.
In case of 90, 270 degree rotated video processing, input to
VPE will be 1080x1920, 720x1280 etc and MAX_H needs to be set
correct value. Setting MAX_H to 2048 as worst case height.
Signed-off-by: Ram Prasad <x0038811@ti.com>
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Nikhil Devshatwar [Mon, 7 Oct 2019 15:09:54 +0000 (12:09 -0300)]
media: ti-vpe: Add support for NV21 format
In NV21 format, the chroma plane is written to memory such that the U
and V components are swapped for NV12.
Create a new entry in the VPDMA formats to describe the correct data
types used in the data descriptors.
Update all checks for NV12 and add NV21 there as well.
Add support for V4L2_PIX_FMT_NV21 format for both capture and output
streams.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Nikhil Devshatwar [Mon, 7 Oct 2019 15:09:53 +0000 (12:09 -0300)]
media: ti-vpe: Add support for SEQ_BT
SEQ_BT indicates the buffer for bottom field needs to be processed
before the top field.
Simplify the field selection logic to support SEQ_BT as well.
Modify the interlace flags to include any of alternate, SEQ_TB, SEQ_BT.
Update other format error checking to consider SEQ_BT.
Replace SEQ_TB with SEQ_XX wherever applicable.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Mon, 7 Oct 2019 15:09:52 +0000 (12:09 -0300)]
media: ti-vpe: vpe: Remove unnecessary use of container_of
Instead of saving a pointer to the 'fh' member of struct vpe_ctx to
later have to use container_of to retrieve the actual pointer to the
context structure, which seems to confuse static code analysis tool
anyways, just save the pointer to the actual structure and then retrieve
it directly.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Mon, 7 Oct 2019 15:09:51 +0000 (12:09 -0300)]
media: ti-vpe: vpe: Add missing null pointer checks
A few NULL pointer checks were missing.
Add check with appropriate return code.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Mon, 7 Oct 2019 15:09:50 +0000 (12:09 -0300)]
media: ti-vpe: vpe: Fix Motion Vector vpdma stride
commit
3dc2046ca78b ("[media] media: ti-vpe: vpe: allow use of user
specified stride") and commit
da4414eaed15 ("[media] media: ti-vpe: vpdma:
add support for user specified stride") resulted in the Motion Vector
stride to be the same as the image stride.
This caused memory corruption in the output image as mentioned in
commit
00db969964c8 ("[media] media: ti-vpe: vpe: Fix line stride
for output motion vector").
Fixes:
3dc2046ca78b ("[media] media: ti-vpe: vpe: allow use of user specified stride")
Fixes:
da4414eaed15 ("[media] media: ti-vpe: vpdma: add support for user specified stride")
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Mon, 7 Oct 2019 15:09:49 +0000 (12:09 -0300)]
media: ti-vpe: Fix a parallel build issue
When TI CAL was introduce as another driver under platform/ti-vpe
adding a second entry into the ti-vpe directory in the platform
Makefile caused issues during parallel build.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Ricardo Ribalda Delgado [Mon, 7 Oct 2019 15:06:36 +0000 (12:06 -0300)]
media: imx214: Add new control with V4L2_CID_UNIT_CELL_SIZE
According to the product brief, the unit cell size is 1120 nanometers^2.
https://www.sony-semicon.co.jp/products_en/IS/sensor1/img/products/ProductBrief_IMX214_20150428.pdf
Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Ricardo Ribalda Delgado [Mon, 7 Oct 2019 15:06:35 +0000 (12:06 -0300)]
media: v4l2-ctrl: Add new helper v4l2_ctrl_ptr_create
This helper function simplifies the code by not needing a union
v4l2_ctrl_ptr and an assignment every time we need to use
a ctrl_ptr.
Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Ricardo Ribalda Delgado [Mon, 7 Oct 2019 15:06:34 +0000 (12:06 -0300)]
media: Documentation: media: Describe V4L2_CID_UNIT_CELL_SIZE
New control to pass to userspace the width/height of a pixel. Which is
needed for calibration and lens selection.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Ricardo Ribalda Delgado [Mon, 7 Oct 2019 15:06:33 +0000 (12:06 -0300)]
media: add V4L2_CID_UNIT_CELL_SIZE control
This control returns the unit cell size in nanometres. The struct provides
the width and the height in separated fields to take into consideration
asymmetric pixels and/or hardware binning.
This control is required for automatic calibration of sensors/cameras.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Ricardo Ribalda Delgado [Mon, 7 Oct 2019 15:06:32 +0000 (12:06 -0300)]
media: Documentation: media: Document V4L2_CTRL_TYPE_AREA
A struct v4l2_area containing the width and the height of a rectangular
area.
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Ricardo Ribalda Delgado [Mon, 7 Oct 2019 15:06:31 +0000 (12:06 -0300)]
media: add V4L2_CTRL_TYPE_AREA control type
This type contains the width and the height of a rectangular area.
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Ricardo Ribalda Delgado [Mon, 7 Oct 2019 15:06:30 +0000 (12:06 -0300)]
media: Documentation: v4l2_ctrl_new_std_compound
Function for initializing compound controls with a default value.
Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Ricardo Ribalda Delgado [Mon, 7 Oct 2019 15:06:29 +0000 (12:06 -0300)]
media: v4l2-core: Implement v4l2_ctrl_new_std_compound
Currently compound controls do not have a simple way of initializing its
values. This results in ofuscated code with type_ops init.
This patch introduces a new field on the control with the default value
for the compound control that can be set with the brand new
v4l2_ctrl_new_std_compound function
Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org>
[hverkuil@xs4all.nl: fix checkpatch warning]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Markus Elfring [Wed, 18 Sep 2019 09:20:48 +0000 (06:20 -0300)]
media: platform: Use devm_platform_ioremap_resource() in two functions
Simplify these function implementations by using a known wrapper function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Niklas Söderlund [Thu, 5 Sep 2019 21:25:17 +0000 (18:25 -0300)]
media: rcar-vin: Use bytes per line instead of width for UV offset
The image size is doubled for NV16 and is calculated as bytesperline *
height * 2 to accommodate the split of UV data. When writing the offset
to hardware, the width is used instead of bytesperline, fix this.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Steve Longerbeam [Sat, 24 Aug 2019 16:33:37 +0000 (13:33 -0300)]
media: imx: Move pads init to probe
If a subdevice is unregistered and then registered again without the
driver being removed and re-probed (which will happen when the media
device is removed and re-probed without also removing/re-probing the
subdevice), media_device_register_entity() is called with a non-zero
entity->num_pads, and then the subdevice's .registered callback calls
media_entity_pads_init(). Thus the subdevice's pad objects are added
to the media device pad list twice, causing list corruption.
One way to fix this would be to create media_entity_pads_destroy(),
and call it in the subdevice's .unregistered callback. But calling
media_entity_pads_init() in the .registered callbacks was done for
legacy reasons and is no longer necessary, so move the call to
media_entity_pads_init() into the subdevice's probe functions. This
fixes the duplicate pad obejcts in the media device pad list.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Steve Longerbeam [Sat, 24 Aug 2019 16:33:36 +0000 (13:33 -0300)]
media: imx: Move capture device init to registered
If the CSI is unregistered and then registered again without the
driver being removed and re-probed (which will happen when the media
device is removed and re-probed without also removing/re-probing the
CSI), the result is the kobject error and backtrace "tried to init an
initialized object". This is because the video device is left in an
initialized state after being unregistered, thus the video device's
underlying kobject is also left in an initialized state when the device
is registered again.
Fix this by moving imx_media_capture_device_init() and _remove()
into csi_registered() and csi_unregistered(). This will create a new
un-initialized video device when the CSI is re-registered. Do this for
all the subdevices that register a capture device.
Reported-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Niklas Söderlund [Tue, 8 Oct 2019 23:22:01 +0000 (20:22 -0300)]
media: rcar-vin: Create compose rectangle where it is used
The rectangle used to correct the compose settings when changing the
format was created inside a helper function and not where it was used.
This is confusing and makes the code harder to read, fix this.
This cleanup is made possible due to refactoring elsewhere and there is
no functional change.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Niklas Söderlund [Tue, 8 Oct 2019 23:22:00 +0000 (20:22 -0300)]
media: rcar-vin: Rename wrongly named rectangle
After recent refactoring the rectangle named crop no longer reflects it
usage, to contain the source rectangle. Fix this by renaming it. There
is no functional change.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Wei Yongjun [Tue, 8 Oct 2019 09:01:33 +0000 (06:01 -0300)]
media: vimc: Fix error return code in vimc_register_devices()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes:
f13d5f361959 ("media: vimc: Collapse component structure into a single monolithic driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Alan Stern [Mon, 7 Oct 2019 15:09:53 +0000 (12:09 -0300)]
media: usbvision: Fix races among open, close, and disconnect
Visual inspection of the usbvision driver shows that it suffers from
three races between its open, close, and disconnect handlers. In
particular, the driver is careful to update its usbvision->user and
usbvision->remove_pending flags while holding the private mutex, but:
usbvision_v4l2_close() and usbvision_radio_close() don't hold
the mutex while they check the value of
usbvision->remove_pending;
usbvision_disconnect() doesn't hold the mutex while checking
the value of usbvision->user; and
also, usbvision_v4l2_open() and usbvision_radio_open() don't
check whether the device has been unplugged before allowing
the user to open the device files.
Each of these can potentially lead to usbvision_release() being called
twice and use-after-free errors.
This patch fixes the races by reading the flags while the mutex is
still held and checking for pending removes before allowing an open to
succeed.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Alan Stern [Mon, 7 Oct 2019 15:09:04 +0000 (12:09 -0300)]
media: usbvision: Fix invalid accesses after device disconnect
The syzbot fuzzer found two invalid-access bugs in the usbvision
driver. These bugs occur when userspace keeps the device file open
after the device has been disconnected and usbvision_disconnect() has
set usbvision->dev to NULL:
When the device file is closed, usbvision_radio_close() tries
to issue a usb_set_interface() call, passing the NULL pointer
as its first argument.
If userspace performs a querycap ioctl call, vidioc_querycap()
calls usb_make_path() with the same NULL pointer.
This patch fixes the problems by making the appropriate tests
beforehand. Note that vidioc_querycap() is protected by
usbvision->v4l2_lock, acquired in a higher layer of the V4L2
subsystem.
Reported-and-tested-by: syzbot+7fa38a608b1075dfd634@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Colin Ian King [Mon, 7 Oct 2019 10:18:48 +0000 (07:18 -0300)]
media: gspca: make array st6422_bridge_init static, makes object smaller
Don't populate the array st6422_bridge_init on the stack but instead
make it static. Makes the object code smaller by 231 bytes.
Before:
text data bss dec hex filename
3419 752 64 4235 108b gspca/stv06xx/stv06xx_st6422.o
After:
text data bss dec hex filename
3124 816 64 4004 fa4 gspca/stv06xx/stv06xx_st6422.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Colin Ian King [Mon, 7 Oct 2019 09:52:40 +0000 (06:52 -0300)]
media: cx18: make array mapping static, makes object smaller
Don't populate the array mapping on the stack but instead make it
static. Makes the object code smaller by 79 bytes.
Before:
text data bss dec hex filename
27572 2096 0 29668 73e4 drivers/media/pci/cx18/cx18-ioctl.o
After:
text data bss dec hex filename
27429 2160 0 29589 7395 drivers/media/pci/cx18/cx18-ioctl.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
YueHaibing [Sun, 6 Oct 2019 07:43:24 +0000 (04:43 -0300)]
media: cx231xx: remove duplicated include from cx231xx-417.c
Remove duplicated include.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Jeeeun Evans [Thu, 26 Sep 2019 15:55:39 +0000 (12:55 -0300)]
media: staging: media: imx: Use devm_platform_ioremap_resource().
This patch fixes a warning by coccicheck:
drivers/staging/media/imx/imx7-mipi-csis.c:973:1-12: WARNING: Use devm_platform_ioremap_resource for state -> regs
Use devm_platform_ioremap_resource helper which wraps platform_get_resource()
and devm_ioremap_resource() together.
Signed-off-by: Jeeeun Evans <jeeeunevans@gmail.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Christophe JAILLET [Sun, 22 Sep 2019 07:41:23 +0000 (04:41 -0300)]
media: cx88: Fix some error handling path in 'cx8800_initdev()'
A call to 'pci_disable_device()' is missing in the error handling path.
In some cases, a call to 'free_irq()' may also be missing.
Reorder the error handling path, add some new labels and fix the 2 issues
mentionned above.
This way, the error handling path in more in line with 'cx8800_finidev()'
(i.e. the remove function)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Christophe JAILLET [Fri, 13 Sep 2019 19:06:47 +0000 (16:06 -0300)]
media: v4l: cadence: Fix how unsued lanes are handled in 'csi2rx_start()'
The 2nd parameter of 'find_first_zero_bit()' is a number of bits, not of
bytes. So use 'csi2rx->max_lanes' instead of 'sizeof(lanes_used)'.
Fixes:
1fc3b37f34f6 ("media: v4l: cadence: Add Cadence MIPI-CSI2 RX driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Navid Emamdoost [Wed, 11 Sep 2019 20:26:00 +0000 (17:26 -0300)]
media: usb: null check create_singlethread_workqueue
In sd_start return value of create_singlethread_workqueue needs null
check.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>