OSDN Git Service
H Hartley Sweeten [Mon, 28 Jul 2014 17:26:47 +0000 (10:26 -0700)]
staging: comedi: ni_tio: tidy up Gi_Counting_Mode_Reg_Bits
Convert this enum into defines and rename all the CamelCase symbols.
For aesthetics, move the new defines so they are associated with the
register define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 28 Jul 2014 17:26:46 +0000 (10:26 -0700)]
staging: comedi: ni_tio: tidy up ni_tio_read_sw_save_reg()
Remove the need for some of the local variables.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 28 Jul 2014 12:09:35 +0000 (13:09 +0100)]
staging: comedi: amplc_pc236, amplc_pci236: get rid of bustype
The `bustype` member of `struct pc236_board` variables is initialized,
but never used. Remove it along with the enumerated constants
associated with it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 28 Jul 2014 12:09:34 +0000 (13:09 +0100)]
staging: comedi: amplc_pc236: split into ISA, PCI and common module
The "amplc_pc236" driver currently handles both ISA and PCI devices and
uses a small amount of conditional compilation depending which are
enabled.
Move most of the functionality into a new module, "amplc_pc236_common",
and split off support for PCI devices into a new module, "amplc_pci236".
Retain support for ISA devices in the existing module, "amplc_pc236".
Since the `detach` handler (`pc236_detach()`) in the existing module
"amplc_pc236" now only needs to handle ISA devices and only calls
`comedi_legacy_detach()`, just use `comedi_legacy_detach()` directly as
the `detach` handler in `struct comedi_driver amplc_pc236_driver`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 28 Jul 2014 12:09:33 +0000 (13:09 +0100)]
staging: comedi: amplc_pc236: add callback to check and clear interrupt
Add an optional callback function pointer to the board data to be called
when checking if an interrupt has occurred and to clear it if it has.
Since the callback returns `bool`, change a few other `int` values to
`bool` to match.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 28 Jul 2014 12:09:32 +0000 (13:09 +0100)]
staging: comedi: amplc_pc236: combine interrupt enable/disable functions
`pc236_intr_enable()` and `pc236_intr_disable()` are very similar.
Combine them into a single function `pc236_intr_update()` with a
parameter to indicate whether interrupts are being enabled or disabled.
Change type type of the `enable_irq` member of the private data to
`bool` to match the parameter.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 28 Jul 2014 12:09:31 +0000 (13:09 +0100)]
staging: comedi: amplc_pc236: add callback to enable/disable interrupt
Add an optional callback function pointer to the board data to be called
when interrupts are logically enabled or disabled to update the hardware
registers.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 28 Jul 2014 12:09:30 +0000 (13:09 +0100)]
staging: comedi: amplc_pc236: don't disable h/w interrupt on detach()
If an asynchronous command was running when the device is being
detached, the comedi core would have called the subdevice `cancel`
handler (`pc236_intr_cancel()`) before calling the `detach` handler
(`pc236_detach()`). Since the cancel handler disables hardware
interrupts (at least for the PCI236 board) by calling
`pc236_disable_intr()`, there is no need for the detach handler to do so
as well. Remove the call to `pc236_disable_intr()` from
`pc236_detach()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 28 Jul 2014 12:09:29 +0000 (13:09 +0100)]
staging: comedi: amplc_pc236: move static board data
Move the static board data in `pc236_isa_boards[]` and `pc236_pci_board`
closer to where they are used.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 17:07:09 +0000 (18:07 +0100)]
staging: comedi: amplc_dio200_pci: no need to test board pointer in dio200_pci_detach()
`dio200_pci_detach()` doesn't need to check if the pointer to constant
board data (`thisboard`) and the pointer to private per-device data
(`devpriv`) are valid before calling `amplc_dio200_common_detach()`. It
has no further need to check `thisboard` so remove the variable
altogether. Move the test of `devpriv` to the first point it is needs
to be valid.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 17:07:08 +0000 (18:07 +0100)]
staging: comedi: amplc_dio200_common: remove some tests from amplc_dio200_common_detach()
`amplc_dio200_common_detach()` doesn't do much apart from freeing the
IRQ handler that was requested by `amplc_dio200_common_attach()` if
`dev->irq` is non-zero. There is no need to check if the pointer to
the constant board data or the pointer to private per-device data
exist, so remove those tests.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 17:07:07 +0000 (18:07 +0100)]
staging: comedi: amplc_dio200_common: prevent extra free_irq()
`dio200_detach()` in "amplc_dio200.c" calls
`amplc_dio200_common_detach()` in "amplc_dio200_common.c", followed by
`comedi_legacy_detach()` in "../drivers.c". Both of those functions
call `free_irq()` if `dev->irq` is non-zero. The second call produces a
warning message because the handler has already been freed. Prevent
that by setting `dev->irq = 0` in `amplc_dio200_common_detach()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Max Vozeler [Mon, 28 Jul 2014 11:28:10 +0000 (13:28 +0200)]
staging: usbip: remove redundant return statements
Remove redundant return statements at the end of void functions. This
addresses the checkpatch.pl warnings:
WARNING: void function return statements are not generally useful
Signed-off-by: Max Vozeler <max@hinterhof.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rahul Garg [Mon, 28 Jul 2014 01:32:32 +0000 (07:02 +0530)]
staging: vt6655: coding style: Fixed commenting style
fix coding style: use C89 comments, not C99
Signed-off-by: Rahul Garg <rahul.lnmiit@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guillaume Clement [Fri, 25 Jul 2014 12:47:23 +0000 (14:47 +0200)]
staging: vt6655: fix direct dereferencing of user pointer
Sparse reported that the data from tagSCmdRequest is given by
userspace, so it should be tagged as such.
Later, we were memcomparing and dereferencing it without first copying
it, fix that as well.
Signed-off-by: Guillaume Clement <gclement@baobob.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabian Frederick [Wed, 23 Jul 2014 19:04:38 +0000 (21:04 +0200)]
staging: ion: vm_insert_pfn and zap_page_range rely on CONFIG_MMU
Fix following sh-allmodconfig errors reported on kisskb
"
drivers/built-in.o: In function `ion_vm_fault':
ion.c:(.text+0x1f2d8f8): undefined reference to `vm_insert_pfn'
drivers/built-in.o: In function `ion_buffer_sync_for_device':
ion.c:(.text+0x1f316bc): undefined reference to `zap_page_range'
make: *** [vmlinux] Error 1
"
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kristina Martšenko [Sun, 27 Jul 2014 19:59:50 +0000 (22:59 +0300)]
staging: sep: remove driver
Looks like no one's working on the driver anymore, so remove it for now.
If someone wants to work on moving it out of staging, this commit can be
reverted.
Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Mark A. Allyn <mark.a.allyn@intel.com>
Cc: Jayant Mangalampalli <jayant.mangalampalli@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicolas Thery [Sun, 27 Jul 2014 18:32:06 +0000 (20:32 +0200)]
staging: ft1000: remove procfs entries
This patch started as a fix to some checkpatch complaints in ft1000
procfs code but Greg suggested to remove the procfs entries altogether:
http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2014-July/055594.html
Signed-off-by: Nicolas Thery <nthery@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Fite [Sun, 27 Jul 2014 18:31:08 +0000 (20:31 +0200)]
staging: lustre: lov: Fix sparse warning using plain integer as NULL pointer
This patch fixes the warning generated by sparse: "Using plain integer as NULL pointer" by replacing the offending 0s with NULL.
drivers/staging/lustre/lustre/lov/lov_obd.c:902:48: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/lov/lov_obd.c:946:54: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/lov/lov_obd.c:2819:46: warning: Using plain integer as NULL pointer
Signed-off-by: Marc Fite <marc@fite.cat>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sylvain Calador [Sun, 27 Jul 2014 17:35:48 +0000 (19:35 +0200)]
staging: rtl8821ae: fixed a space coding style issue
Fixed a coding style issue.
Signed-off-by: Sylvain Calador <sylvain.calador@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rickard Strandqvist [Sat, 26 Jul 2014 14:43:20 +0000 (16:43 +0200)]
staging: usbip: stub_main.c: Cleaning up missing null-terminate in conjunction with strncpy
Replacing strncpy with strlcpy to avoid strings that lacks null terminate.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rickard Strandqvist [Sat, 26 Jul 2014 14:41:46 +0000 (16:41 +0200)]
staging: unisys: include: uisutils.h: Cleaning up missing null-terminate in conjunction with strncpy
Replacing strncpy with strlcpy to avoid strings that lacks null terminate.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Seunghun Lee [Fri, 25 Jul 2014 16:49:01 +0000 (01:49 +0900)]
staging: dgnc: remove commented code
This patch removes commented code in dgnc driver.
CC: Lidza Louina <lidza.louina@gmail.com>
CC: Mark Hounschell <markh@compro.net>
Signed-off-by: Seunghun Lee <waydi1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 16:53:12 +0000 (19:53 +0300)]
Staging: vt6655: removed redundant comments from power.h
Removed redundant comments from power.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 16:50:25 +0000 (19:50 +0300)]
Staging: vt6655: removed redundant comments from michael.h
Removed redundant comments from michael.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 16:48:48 +0000 (19:48 +0300)]
Staging: vt6655: removed redundant comments from mib.h
Removed redundant comments from mib.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 16:33:04 +0000 (19:33 +0300)]
Staging: vt6655: removed redundant comments from iowpa.h
Removed redundant comments from iowpa.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 16:31:26 +0000 (19:31 +0300)]
Staging: vt6655: removed redundant comments from ioctl.h
Removed redundant comments from ioctl.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 16:29:28 +0000 (19:29 +0300)]
Staging: vt6655: removed redundant comments from iocmd.h
Removed redundant comments from iocmd.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 16:26:14 +0000 (19:26 +0300)]
Staging: vt6655: removed redundant comments from IEEE11h.h
Removed redundant comments from IEEE11h.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 16:22:35 +0000 (19:22 +0300)]
Staging: vt6655: removed redundant comments from hostap.h
Removed redundant comments from hostap.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 16:20:50 +0000 (19:20 +0300)]
Staging: vt6655: removed redundant comments from dpc.h
Removed redundant comments from dpc.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 16:10:36 +0000 (19:10 +0300)]
Staging: vt6655: removed redundant comments from device_cfg.h
Removed redundant comments from device_cfg.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 16:05:31 +0000 (19:05 +0300)]
Staging: vt6655: removed redundant comments from desc.h
Removed redundant comments from desc.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
C99 style comments will be fixed in further patches.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 15:39:36 +0000 (18:39 +0300)]
Staging: vt6655: removed redundant comments from channel.h
Removed redundant comments from channel.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 15:43:22 +0000 (18:43 +0300)]
Staging: vt6655: removed redundant comments from country.h
Removed redundant comments from country.h header file
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 15:47:53 +0000 (18:47 +0300)]
Staging: vt6655: removed redundant comments from datarate.h
Removed redundant comments from datarate.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 15:34:23 +0000 (18:34 +0300)]
Staging: vt6655: remove redundant comments from card.h
Removed redundant comments from card.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudip Mukherjee [Fri, 25 Jul 2014 14:35:37 +0000 (20:05 +0530)]
staging: bcm: DDRInit.c: fixed coding style: lines over 80 char
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 09:04:58 +0000 (10:04 +0100)]
staging: comedi: amplc_pc236: set board_name before common attach
For PCI boards, the `auto_attach` handler, `pc236_auto_attach()`,
initializes `dev->board_ptr` to point to a `struct pc236_board`, but
leaves `dev->board_name` unchanged. The Comedi core will have
initialized `dev->board_name` to the `driver_name` string member of
`amplc_pc236_driver`. For consistency with ISA boards manually
configured by the `COMEDI_DEVCONFIG` ioctl via the legacy `attach`
handler, `pc236_attach()`, set `dev->board_name` to the `name` member of
the `struct pc236_board` pointed to by `dev->board_ptr`.
Both `pc236_attach()` and `pc236_auto_attach()` call
`pc236_common_attach()`, which also sets `dev->board_name` to the `name`
member of the `struct pc236_board`. Since this assignment no longer
changes anything, remove it.
A nice side-effect of this change is that the same owner name string is
used for requesting I/O regions (before the call the
`pc236_common_attach()`) as is used for requesting the IRQ handler
(during the call to `pc236_common_attach()`). It was already the same
for (manually configured) ISA boards, but is now the same for
(automatically configured) PCI boards.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 09:04:57 +0000 (10:04 +0100)]
staging: comedi: amplc_pc236: remove PCI device ID macros
The `PCI_DEVICE_ID_AMPLICON_PCI236` macro is only used once, in the
module device table, so remove it and expand the macro in the table.
`The `PCI_DEVICE_ID_INVALID` macro is no longer used, so remove it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 09:04:56 +0000 (10:04 +0100)]
staging: comedi: amplc_pc236: Simplify PCI board look-up
Since only a single PCI board is supported by the driver, there is no
need to call `pc236_find_pci_board()` to find the a board entry with
matching PCI device ID in `pc236_pci_boards[]`. Just point to the entry
directly and remove the look-up function. In fact, there is no reason
for `pc236_pci_boards[]` to be an array, so change it to a non-array
variable and rename it to `pc236_pci_board`. Also, the `devid` member
of `struct pc236_board` is no longer needed as it was only used by the
look-up function, so remove it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 09:04:55 +0000 (10:04 +0100)]
staging: comedi: amplc_pc236: don't check bus type in attach
Since the legacy attach routine `pc236_attach()` is only called for
board names matching an entry in our array of ISA boards
`pc236_isa_boards[]`, and it is reasonable to expect all elements of
`pc236_isa_boards[]` to have their `bustype` member initialized
correctly to `isa_bustype`, don't bother checking the bus type in
`pc236_attach()`. Add `if (!DO_ISA) return -EINVAL` to optimize out the
remainder of the function if `CONFIG_COMEDI_AMPLC_PC236_ISA` is not
defined.
Similarly, don't bother checking the bus type in
`pc236_find_pci_board()` as it is reasonable to expect all elements of
`pc236_pci_boards[]` to have their `bustype` member initialized
correctly to `pci_bustype`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 09:04:54 +0000 (10:04 +0100)]
staging: comedi: amplc_pc236: split pc236_boards[] into ISA & PCI
Split `pc236_boards[]` into `pc236_isa_boards[]` for ISA cards and
`pc236_pci_boards[]` for PCI cards (there is only one of each). Only
initialize the board name look-up members of `struct comedi_driver
amplc_pc236_driver` if the ISA part of the driver is enabled in the
kernel config (`CONFIG_COMEDI_AMPLC_PC236_ISA`) using the array of ISA
boards (`pc236_isa_boards[]`). The driver doesn't allow manual
configuration of PCI devices, so there is no point having the comedi
core match the names of the PCI boards before it calls our driver's
legacy attach routine (`pc236_attach()`).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 09:04:53 +0000 (10:04 +0100)]
staging: comedi: amplc_pc236: remove 'model' member
The `model` member of `struct pc236_board` is no longer used since the
code to remove manual configuration of PCI devices was removed. Get rid
of it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 09:04:52 +0000 (10:04 +0100)]
staging: comedi: amplc_pc236: absorb pc236_pci_common_attach()
Absorb `pc236_pci_common_attach()` into `pc236_auto_attach()` since
that's the only place it is called from.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 09:04:51 +0000 (10:04 +0100)]
staging: comedi: amplc_pc236: no need to set hw_dev
The call to `comedi_set_hw_dev()` from `pc236_pci_common_attach()` is
now unnecessary since `pc236_pci_common_attach()` is now only called
from this driver's `auto_attach` hook `pc236_auto_attach()` and the
comedi core now calls `comedi_set_hw_dev()` before calling that. Remove
the unnecessary call.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 09:04:50 +0000 (10:04 +0100)]
staging: comedi: amplc_pc236: no need to manipulate PCI ref count
Now that this driver no longer supports "manual" attachment of PCI
devices in its `attach` hook (`pc236_attach()`), it no longer has code
that searches for a suitable PCI device and increments its reference
count. Since the driver no longer has any reason for incrementing and
decrementing the PCI device's reference count, the calls to
`pci_dev_get()` and `pci_dev_put()` can be removed.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 09:04:49 +0000 (10:04 +0100)]
staging: comedi: amplc_pc236: remove manual configuration of PCI boards
Remove the code that allows PCI boards to be manually attached by the
`COMEDI_DEVCONFIG` ioctl (or the "comedi_config" application).
Supported PCI boards (PCI236) will be attached automatically at probe
time via `comedi_pci_auto_config()` and the `auto_attach` hook in the
`struct comedi_driver`.
The "wildcard" entry in `pc236_boards[]` was only used when manually
attaching a PCI board using a driver name instead of a board name, so is
no longer needed. Remove it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 09:04:48 +0000 (10:04 +0100)]
staging: comedi: amplc_pc236: remove some boilerplate comments
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 09:04:47 +0000 (10:04 +0100)]
staging: comedi: amplc_pc236: reformat header comments
Use preferred style for copyright and driver description comments.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 25 Jul 2014 02:55:08 +0000 (22:55 -0400)]
staging: unisys: remove partition information from proc
Debugging information for the guest's channels was being exposed in proc.
Remove the code that creates these entries, which are no longer needed.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kristina Martšenko [Thu, 24 Jul 2014 23:30:46 +0000 (02:30 +0300)]
staging: silicom: remove driver
The driver hasn't been cleaned up and it doesn't look like anyone is
working on it anymore (including the original author). So remove it.
If someone wants to work on cleaning the driver up and moving it out of
staging, this commit can be reverted.
In addition, since this removes the CONFIG_NET_VENDOR_SILICOM config
symbol, remove the symbol from all defconfig files that reference it.
Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Cc: Daniel Cotey <puff65537@bansheeslibrary.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L. Alberto Giménez [Thu, 24 Jul 2014 22:50:25 +0000 (00:50 +0200)]
staging/lustre: Fix sparse error (signature mismatch)
lprocfs_wr_atomic is defined in
drivers/staging/lustre/lustre/obdclass/lprocfs_status.c with its second argument
with the __user attribute:
int lprocfs_wr_atomic(struct file *file, const char __user *buffer,
unsigned long count, void *data)
but its declaration in drivers/staging/lustre/lustre/include/lprocfs_status.h does
not include the attribute. Make declaration and definition match.
Signed-off-by: L. Alberto Giménez <agimenez@sysvalve.es>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guillaume Clement [Thu, 24 Jul 2014 23:06:28 +0000 (01:06 +0200)]
staging: vt6655: Remove NULL pointer sparse warning
We were using 0 instead of NULL to initialize a pointer, which caused
a sparse warning.
Signed-off-by: Guillaume Clement <gclement@baobob.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guillaume Clement [Thu, 24 Jul 2014 23:06:27 +0000 (01:06 +0200)]
staging: vt6655: remove unused macro
The MAC_MAX_CONTEXT_SIZE macro was not enclosed into parenthesis,
which might have caused hard to debug errors, and caused a sparse
warning.
Since it is unused, we might as well remove it.
Signed-off-by: Guillaume Clement <gclement@baobob.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guillaume Clement [Thu, 24 Jul 2014 23:06:26 +0000 (01:06 +0200)]
staging: vt6655: fix braces at newline in if statements
Braces should not be in a separate line for multi-line if
statements. This fixes warnings reported by checkpatch.
Signed-off-by: Guillaume Clement <gclement@baobob.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guillaume Clement [Thu, 24 Jul 2014 23:06:25 +0000 (01:06 +0200)]
staging: vt6655: remove braces for single statements if
This fixes several "braces {} are not necessary for single statement
blocks" checkpatch warnings.
Signed-off-by: Guillaume Clement <gclement@baobob.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guillaume Clement [Thu, 24 Jul 2014 23:06:24 +0000 (01:06 +0200)]
staging: vt6655: add missing whitespace
Some whitespace were missing, causing checkpatch warnings and altering
readability.
Signed-off-by: Guillaume Clement <gclement@baobob.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guillaume Clement [Thu, 24 Jul 2014 23:06:23 +0000 (01:06 +0200)]
staging: vt6655: Remove unreachable break statements
This fixes break "break is not useful after a goto or return"
checkpatch warnings.
Signed-off-by: Guillaume Clement <gclement@baobob.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guillaume Clement [Thu, 24 Jul 2014 23:06:22 +0000 (01:06 +0200)]
staging: vt6655: break single line if statements
This fixes the "trailing statements should be on next line" checkpatch
warning.
Signed-off-by: Guillaume Clement <gclement@baobob.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guillaume Clement [Thu, 24 Jul 2014 23:06:21 +0000 (01:06 +0200)]
staging: vt6655: Use pr_* functions instead of printk
Lots of printk are used in vt6655, replace them with the pr_*
equivalent.
Signed-off-by: Guillaume Clement <gclement@baobob.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guillaume Clement [Thu, 24 Jul 2014 23:06:20 +0000 (01:06 +0200)]
staging: vt6655: fix static position in inline function
This should be "static inline", not "inline static". Reported by
checkpatch.
Signed-off-by: Guillaume Clement <gclement@baobob.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guillaume Clement [Thu, 24 Jul 2014 23:06:19 +0000 (01:06 +0200)]
staging: vt6655: fix braces at newline for structs
For structs definitions, the braces should be at the end of the
line. Reported by checkpatch.
Signed-off-by: Guillaume Clement <gclement@baobob.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guillaume Clement [Thu, 24 Jul 2014 23:06:18 +0000 (01:06 +0200)]
staging: vt6655: fix function braces not on the proper line
Function braces should be on a separate line. Reported by checkpatch.
Signed-off-by: Guillaume Clement <gclement@baobob.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guillaume Clement [Thu, 24 Jul 2014 23:06:17 +0000 (01:06 +0200)]
staging: vt6655: Remove spaces before quoted newlines
This fixes several spaces added just before a newline in debug
strings, reported by checkpatch.
Signed-off-by: Guillaume Clement <gclement@baobob.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guillaume Clement [Thu, 24 Jul 2014 23:06:16 +0000 (01:06 +0200)]
staging: vt6655: Add missing blank lines after declarations
This patch fixes the missing blank lines after declarations in vt6655
reported by checkpatch.
Signed-off-by: Guillaume Clement <gclement@baobob.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guillaume Clement [Thu, 24 Jul 2014 23:06:15 +0000 (01:06 +0200)]
staging: vt6655: remove useless return statements
Many return statements in void function were present at the end of
functions, with no effect. They now are removed.
This fixes a bunch of checkpatch warnings.
Signed-off-by: Guillaume Clement <gclement@baobob.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Thu, 24 Jul 2014 22:34:18 +0000 (23:34 +0100)]
staging: vt6656: wcmd.h remove dead macros
AUTHENTICATE_TIMEOUT
ASSOCIATE_TIMEOUT
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Thu, 24 Jul 2014 22:34:17 +0000 (23:34 +0100)]
staging: vt6656: rf.h cleanup C_PWBT comments
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Thu, 24 Jul 2014 22:34:16 +0000 (23:34 +0100)]
staging: vt6656: power.h remove dead macros
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Thu, 24 Jul 2014 22:34:15 +0000 (23:34 +0100)]
staging: vt6656: dpc remove unneeded headers
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Thu, 24 Jul 2014 22:34:14 +0000 (23:34 +0100)]
staging: vt6656: dpc.h remove dead function prototypes
Removing
RXvWorkItem
RXvFreeRCB
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 24 Jul 2014 17:15:05 +0000 (10:15 -0700)]
staging: comedi: ni_tio: convert printk to pr_err
Convert the printk(KERN_ERR ...) in ni_m_clk_src() to a pr_err().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 24 Jul 2014 17:15:04 +0000 (10:15 -0700)]
staging: comedi: ni_tio: remove forward declarations
Move some of the functions to remove the need for the forward
declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 24 Jul 2014 17:15:03 +0000 (10:15 -0700)]
staging: comedi: ni_tio: tidy up ni_tio_set_clock_src() and helpers
Do some renaming of local vars, etc. to tidy up the ugly line breaks
to improve the readability of the code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 24 Jul 2014 17:15:02 +0000 (10:15 -0700)]
staging: comedi: ni_tio: tidy up ni_tio_get_clock_src()
Remove the static const local variable and add a blank line after
the declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 24 Jul 2014 17:15:01 +0000 (10:15 -0700)]
staging: comedi: ni_tio: absorb ni_tio_set_first_gate_modifiers()
This function is only called by ni_tio_set_gate_src(). For aesthetics,
absorb the code into that function..
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 24 Jul 2014 17:15:00 +0000 (10:15 -0700)]
staging: comedi: ni_tio: tidy up ni_tio_set_gate_src() and helpers
Do some renaming of local vars, parameters, etc. to tidy up the ugly
line breaks to improve the readability of the code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 24 Jul 2014 17:14:59 +0000 (10:14 -0700)]
staging: comedi: ni_tio: tidy up ni_tio_set_other_src()
Invert the counter_dev->variant test to reduce the indent level of
this function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 24 Jul 2014 17:14:58 +0000 (10:14 -0700)]
staging: comedi: ni_tio: tidy up ni_tio_get_gate_src() and helpers
Do some renaming of local vars, parameters, etc. to tidy up the ugly
line breaks to improve the readability of the code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 24 Jul 2014 17:14:57 +0000 (10:14 -0700)]
staging: comedi: ni_tio: absorb ni_tio_counter_status()
This function is only called to handle the INSN_CONFIG_GET_COUNTER_STATUS
instruction. For aesthetics, absorb the code into ni_tio_insn_config().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 24 Jul 2014 17:14:56 +0000 (10:14 -0700)]
staging: comedi: ni_tio: tidy up ni_tio_set_sync_mode()
Fix the > 80 char line issues in this function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 24 Jul 2014 17:14:55 +0000 (10:14 -0700)]
staging: comedi: ni_tio: tidy up ni_660x_source_select_bits()
Rename a local variable to fix the > 80 char line issues.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 24 Jul 2014 17:14:54 +0000 (10:14 -0700)]
staging: comedi: ni_tio: tidy up ni_m_series_source_select_bits()
Rename a local variable to fix the > 80 char line issues.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 24 Jul 2014 17:14:53 +0000 (10:14 -0700)]
staging: comedi: ni_tio: rename ni_tio_second_gate_registers_present()
For aesthetics, rename this function to shorten some of the long lines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 24 Jul 2014 17:14:52 +0000 (10:14 -0700)]
staging: comedi: ni_tio: tidy up ni_tio_init_counter()
This function is called to initialize/reset a gpct counter during a
comedi drivers (*attach).
For aesthetics, move this exported function toward the end of the file.
Tidy up the functions a bit by just open coding the '0x0' values used
to initialize some of the registers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 24 Jul 2014 17:14:51 +0000 (10:14 -0700)]
staging: comedi: ni_tio: tidy up ni_gpct_device_{construct,destroy)()
For aesthetics, move these exported functions to the end of the file.
Tidy up the functions a bit and remove the BUG_ON when (num_counters == 0).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 24 Jul 2014 17:14:50 +0000 (10:14 -0700)]
staging: comedi: ni_tio: move defines to head of file
For aesthetics, move all the defines to the head of the file.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 24 Jul 2014 17:14:49 +0000 (10:14 -0700)]
staging: comedi: ni_tio: tidy up enum ni_660x_clock_source
These values are not used as an enum. For aesthetics, rename the
CamelCase values and convert them into defines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 24 Jul 2014 17:14:48 +0000 (10:14 -0700)]
staging: comedi: ni_tio: tidy up enum ni_m_series_clock_source
These values are not used as an enum. For aesthetics, rename the
CamelCase values and convert them into defines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 24 Jul 2014 17:14:47 +0000 (10:14 -0700)]
staging: comedi: ni_tio: tidy up enum ni_660x_gate_select
These values are not used as an enum. For aesthetics, rename the
CamelCase values and convert them into defines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 24 Jul 2014 17:14:46 +0000 (10:14 -0700)]
staging: comedi: ni_tio: tidy up enum ni_m_series_gate_select
These values are not used as an enum. For aesthetics, rename the
CamelCase values and convert them into defines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 24 Jul 2014 17:14:45 +0000 (10:14 -0700)]
staging: comedi: ni_tio: tidy up enum ni_660x_second_gate_select
These values are not used as an enum. For aesthetics, rename the
CamelCase values and convert them into defines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 24 Jul 2014 17:14:44 +0000 (10:14 -0700)]
staging: comedi: ni_tio: remove counter_status_mask
For aesthetics, remove this global static const varaible.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 24 Jul 2014 17:14:43 +0000 (10:14 -0700)]
staging: comedi: ni_tio: convert global static const variables to defines
For aesthetics, convert the global static const varaibles into defines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 24 Jul 2014 17:14:42 +0000 (10:14 -0700)]
staging: comedi: ni_tio: convert NI_660x_Up_Down_Pin_Second_Gate_Select() to a macro
The BUG_ON() in this function can never happen.
For aesthetics, rename this CamelCase inline function and convert it into
a simple macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 24 Jul 2014 17:14:41 +0000 (10:14 -0700)]
staging: comedi: ni_tio: convert NI_660x_RTSI_Second_Gate_Select() to a macro
The BUG_ON() in this function can never happen.
For aesthetics, rename this CamelCase inline function and convert it into
a simple macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 24 Jul 2014 17:14:40 +0000 (10:14 -0700)]
staging: comedi: ni_tio: convert NI_660x_RTSI_Clock() to a macro
The BUG_ON() in this function can never happen.
For aesthetics, rename this CamelCase inline function and convert it into
a simple macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 24 Jul 2014 17:14:39 +0000 (10:14 -0700)]
staging: comedi: ni_tio: convert NI_660x_Source_Pin_Clock() to a macro
The BUG_ON() in this function can never happen.
For aesthetics, rename this CamelCase inline function and convert it into
a simple macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>