OSDN Git Service
Olof Johansson [Wed, 19 Apr 2017 12:22:29 +0000 (05:22 -0700)]
Merge tag 'stm32-dt-for-v4.12-1' of git://git./linux/kernel/git/atorgue/stm32 into next/dt
STM32 DT updates for v4.12, round 1
Highlights:
----------
- ADD RTC support on STM32F746 MCU
- Enable RTC on STM32F746 Eval board
- Enable clocks on STM32F746 MCU
- Enable DMA, pwm1 and pwm3 on STM32F429I Eval
- Add support of STM32H743 MCU and his Eval board
- Enable USB HS and FS on STM32F469 Disco board
* tag 'stm32-dt-for-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
dt-bindings: Document the STM32 USB OTG DWC2 core binding
ARM: dts: stm32: Enable USB HS in FS mode (embedded phy) on stm32f429-disco
ARM: dts: stm32: Enable USB FS on stm32f469-disco
ARM: dts: stm32: Add USB FS support for STM32F429 MCU
ARM: dts: stm32: Add STM32H743 MCU and STM32H743i-EVAL board
ARM: dts: stm32: Enable pwm1 and pwm3 on stm32f429i-eval
ARM: dts: stm32: Enable dma by default on stm32f4 adc
ARM: dts: stm32: enable RTC on stm32746g-eval
ARM: dts: stm32: Add RTC support for STM32F746 MCU
ARM: dts: stm32: set HSE_RTC clock frequency to 1 MHz on stm32f746
dt-bindings: mfd: Add STM32F7 RCC numeric constants into DT include file
ARM: dts: stm32: Enable clocks for STM32F746 MCU
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 19 Apr 2017 12:20:54 +0000 (05:20 -0700)]
Merge branch 'sti-dt-for-v4.12-round1' of git://git./linux/kernel/git/pchotard/sti into next/dt
* 'sti-dt-for-v4.12-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
ARM: dts: STiH407-family: update rproc node names to avoid conflict
ARM: dts: STiH407-family: fix spi nodes
Signed-off-by: Olof Johansson <olof@lixom.net>
Bruno Herrera [Wed, 1 Feb 2017 01:25:00 +0000 (02:25 +0100)]
dt-bindings: Document the STM32 USB OTG DWC2 core binding
This patch adds the documentation for STM32F4x9 USB OTG FS/HS compatible
strings.
Signed-off-by: Bruno Herrera <bruherrera@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Bruno Herrera [Wed, 1 Feb 2017 01:25:00 +0000 (02:25 +0100)]
ARM: dts: stm32: Enable USB HS in FS mode (embedded phy) on stm32f429-disco
This patch enables USB HS working in FS mode on stm32f429-disco
with 5V VBUS enable.
Signed-off-by: Bruno Herrera <bruherrera@gmail.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Bruno Herrera [Wed, 1 Feb 2017 01:25:00 +0000 (02:25 +0100)]
ARM: dts: stm32: Enable USB FS on stm32f469-disco
This patch enables USB FS on stm32f469-disco with 5V VBUS enable.
Signed-off-by: Bruno Herrera <bruherrera@gmail.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Bruno Herrera [Wed, 1 Feb 2017 01:25:00 +0000 (02:25 +0100)]
ARM: dts: stm32: Add USB FS support for STM32F429 MCU
This patch adds the USB pins and nodes for USB FS core.
Signed-off-by: Bruno Herrera <bruherrera@gmail.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Arnd Bergmann [Fri, 31 Mar 2017 10:19:39 +0000 (12:19 +0200)]
Merge tag 'arm-soc/for-4.11/devicetree-fixes' of github.com/Broadcom/stblinux into fixes
There was a little conflict between the v4.11 bugfixes and the new changes for 4.12,
this merges the fixes into the 4.12 branch to avoid having to resolve it again.
* Broadcom fixes in mainline
ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags
ARM: dts: BCM5301X: Fix memory start address
ARM: dts: BCM5301X: Fix UARTs on bcm953012k
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 31 Mar 2017 10:11:03 +0000 (12:11 +0200)]
Merge tag 'omap-for-v4.12/dt-v2-signed' of git://git./linux/kernel/git/tmlind/linux-omap into next/dt
Pull "Devicetree changes for omaps for v4.12 merge window" from Tony Lindgren:
- Add hecc node for am35x
- Add onenand support for omap3-igep
- Add bluetooth binding for n900/n9/n950
- Configure clocks and SATA for dm81xx
- Update operating points tables for am33xx, am43xx and dra7
- Update SPI flash documentation for w25q64
- Configure SPI NOR for am335x-icev2
- Mux uart0 for am437x-gp-evm
- Add thermal zones for omap3, omap4, omap5, dra7
- Configure LEDs for am335x-baltos
- A series of droid 4 changes to configure various devices
such as keypad, regulators, gpio-keys, rtc, power button,
compass, accelerometer, touchscreen, backlight, poweroff,
tmp105, HDMI, LCD panel and LEDs, EHCI, and micro-SD
* tag 'omap-for-v4.12/dt-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (35 commits)
ARM: dts: am335x-baltos: add LED support
ARM: dts: omap4-droid4: Fix MMC1 card for detect GPIO and regulator
ARM: dts: OMAP4460: Thermal: Add slope and offset values
ARM: dts: OMAP443x: Thermal: Add slope and offset values
ARM: dts: OMAP5: Thermal: Add slope and offset values
ARM: dts: DRA7: Thermal: Add slope and offset values
ARM: dts: omap3: Add cpu_thermal zone
ARM: dts: am437x-gp-evm: Add pinmux for uart0
ARM: dts: am335x-icev2: Add SPI based NOR
Documentation: devicetree: mtd: add w25q64 to list of supported SPI flashes
ARM: dts: dra7: Add updated operating-points-v2 table for cpu
ARM: dts: am4372: Update operating-points-v2 table for cpu
ARM: dts: am335x-boneblack: Enable 1GHz OPP for cpu
ARM: dts: am33xx: Add updated operating-points-v2 table for cpu
ARM: dts: dm8168-evm: add SATA node
ARM: dts: dm8168-evm: add the external reference clock for SATA
ARM: dts: N9/N950: add bluetooth
ARM: dts: N900: Add bluetooth
ARM: dts: omap4-droid4: Configure EHCI so modems can be accessed
ARM: dts: motorola-cpcap-mapphone: add LEDs
...
Arnd Bergmann [Fri, 31 Mar 2017 10:09:39 +0000 (12:09 +0200)]
Merge tag 'v4.12-rockchip-dts32-1' of git://git./linux/kernel/git/mmind/linux-rockchip into next/dt
Pull "Rockchip dts32 updates for 4.12 part1" from Heiko Stübner:
Contains one new board, the Tinkerboard from Asus based on the rk3288,
definitions for the mmc resets in the socs reset controller, sound
support for the Rock2, dma support for mmc controllers on the rk3188
and a led-fix for the MiQi board and and irq-fix for older Cortex-A9 socs.
* tag 'v4.12-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: setup DMA-channels for mmc0 and emmc for rk3188
ARM: dts: rockchip: fix PPI misconfiguration on Cortex-A9 socs
ARM: dts: rockchip: add rk322x dw-mmc resets
ARM: dts: rockchip: add rk3066/rk3188 dw-mmc resets
ARM: dts: rockchip: add rk3036 dw-mmc resets
ARM: dts: rockchip: add rk3288 dw-mmc resets
ARM: dts: rockchip: add dts for RK3288-Tinker board
dt-bindings: add rk3288-based Asus Tinker board
ARM: dts: rockchip: fix the MiQi board's LED definition
ARM: dts: rockchip: Add support for ES8388 to the Radxa Rock 2
Arnd Bergmann [Fri, 31 Mar 2017 10:05:13 +0000 (12:05 +0200)]
Merge tag 'gemini-dts-2' of git://git./linux/kernel/git/linusw/linux-nomadik into next/dt
Pull "DTS updates for the Gemini on top of the multiplatform base" from Linus Walleij:
- Add the power controller to the DTS.
- Augment the GPIO nodes to also include the Faraday
compatible.
- Add the PCI bus host and config to the Gemini device trees.
* tag 'gemini-dts-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: add PCI to the Gemini device trees
ARM: dts: augment Gemini GPIO nodes
ARM: dts: add power controller to the Gemini DTS
Arnd Bergmann [Fri, 31 Mar 2017 10:02:22 +0000 (12:02 +0200)]
Merge tag 'arm-soc/for-4.12/devicetree' of github.com/Broadcom/stblinux into next/dt
Pull "Broadcom devicetree changes for 4.12" from Florian Fainelli:
This pull request contains Broadcom ARM-based SoCs Device Tree updates for
4.12, please pull the following:
- Rafal:
* adds basic support for the Linksys EA9200, Linksys EA6300 V1, Linksys
EA9500, TP-Link Archer C5 V2 which are all based on BCM470x SoCs with
a bunch of BCM43602 radios.
* updates the BCM5301X DTS and DTS include file and moves the serial
console parameters to the DTS include file since all BCM5301X that we have so
far are consistent in using the same UART. He also does the same for the
BCM53573 DTS.
* makes some updates to the Tenda AC9 platform by describing its
PCIe controllers and endpoints in order to be able to represent GPIOs attached
to the on-chip Wi-Fi module. Once done, he adds the 2Ghz LED which is connected
to one of these GPIOs.
* re-licenses the DTS files he created to the ISC license
* removes the use of the non-existend "default-off" LED trigger in the
BCM53573 and BCM5301X DTS files
- Aditya adds missing Netgear R8000 LEDS and keys for WAN status LEDS and brightness
- Jon:
* adds NAND controller Device Tree nodes to the BCM953012K reference board
* converts the BCM5301X SoC to use the recently introduced Broadcom QSPI controller
Device Tree nodes.
* fixes the GIC PPI interrupt flags that the kernel now
reports about.
* adds ARM TWD watchdog entries to the BCM5301X DTS include file
* adds I2C entries to the BCM5301X DTS include files.
* disables i2c by default in the Northstar Plus DTS include file, and
,enables it at the board level instead.
* adds USB (OHCI & EHCI) Device Tree nodes to the Northstar Plus DTS
include files.
- Steven adds the mailbox (PDC) unit and the crytographic unit (SPU) to the
Broadcom Northstar Plus SoC DTS include file. Steven also adds proper ethernet
aliases to the BCM53012HR board since some bootloaders require that for MAC address
patching.
- Eric adds the DSI and its corresponding clock nodes to the BCM283x DTS files
but leaves them disabled by default (overlays should take care of enabling it)
- Boris adds support for HDMI audio and related DMA channels to the BCM283x SoCs
- Gerd adds support for the BCM2835 specific SDHCI controller to the BCM283x SoCs
- Rob fixes the iProc msi-controller name and unit address now that DTC can produce
additional errors
* tag 'arm-soc/for-4.12/devicetree' of http://github.com/Broadcom/stblinux: (27 commits)
ARM: dts: bcm: fix msi-controller name and unit address
ARM: dts: BCM53573: Specify serial console parameters
ARM: dts: BCM5301X: Specify serial console params in dtsi files
ARM: dts: NSP: Add crypto (SPU) to dtsi
ARM: dts: NSP: Add mailbox (PDC) to NSP
ARM: dts: BCM953012HR: Add ethernet aliases
ARM: dts: BCM5301X: Add support for TP-LINK Archer C5 V2
ARM: dts: NSP: disable i2c DT entry by default
ARM: dts: NSP: Add EHCI/OHCI USB nodes to device tree
ARM: dts: BCM5301X: Add I2C support to the DT
ARM: dts: BCM5301X: Add TWD WD Support to DT
ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags
ARM: dts: bcm2835: add sdhost controller to devicetree
ARM: dts: bcm283x: Add HDMI audio related properties
ARM: dts: BCM5301X: Don't use nonexistent "default-off" LED trigger
ARM: dts: BCM53573: Don't use nonexistent "default-off" LED trigger
ARM: dts: BCM5301X: Add missing Netgear R8000 LEDs and Keys
ARM: dts: BCM5301X: Relicense DTS files I created to the ISC
ARM: dts: bcm2835: Add the DSI module nodes and clocks.
ARM: dts: BCM53573: Add Tenda AC9 2 GHz LED
...
Arnd Bergmann [Fri, 31 Mar 2017 10:01:24 +0000 (12:01 +0200)]
Merge tag 'mvebu-dt-4.12-1' of git://git.infradead.org/linux-mvebu into next/dt
Pull "mvebu dt for 4.12 (part 1)" from Gregory CLEMENT:
- Add node lable for Armada 38x
- Add support for Synology DS116 NAS and Linksys WRT1900ACS
- Update mbus controller description on Armada 38x allowing entering in standby
- Add default trigger for sata led on various linksys boards
- Update newly added armada-xp-98dx3236
- Enable hardware buffer manager support for the devices in the
Linksys WRT AC Serie
* tag 'mvebu-dt-4.12-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: mvebu: linksys: enable buffer manager support
ARM: dts: mvebu: remove unnecessary PCI range from 98dx3236
ARM: dts: mvebu: Move mv98dx3236 clock bindings
ARM: dts: Use armada-370-xp as a base for armada-xp-98dx3236
ARM: dts: armada-xp-98dx3236: combine dfx server nodes
ARM: dts: armada: Add default trigger for sata led
ARM: dts: armada-38x: Adjust mbus controller description on Armada 38x
ARM: dts: armada-385: add support for the Linksys WRT1900ACS (Shelby)
ARM: dts: armada-385-synology-ds116: add support for Synology DS116 NAS
ARM: dts: armada-38x add node labels
Arnd Bergmann [Fri, 31 Mar 2017 10:00:34 +0000 (12:00 +0200)]
Merge tag 'davinci-for-v4.12/dt' of git://git./linux/kernel/git/nsekhar/linux-davinci into next/dt
Pull "DaVinci DT updates for v4.12" from Sekhar Nori:
DaVinci device tree updates to enable
Video display on DA850 along with some
whitespace clean-up.
Also, enables sound and ADC support on
Lego EV3.
* tag 'davinci-for-v4.12/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850-evm: add the output port to the vpif node
ARM: dts: da850-evm: add IO expander node on UI card
ARM: dts: da850: add vpif video display pins
ARM: dts: da850-evm: fix whitespace errors
ARM: da850-lego-ev3: Add device tree node for sound
ARM: da850-lego-ev3: Add device tree node for A/DC
Linus Walleij [Wed, 22 Mar 2017 11:12:09 +0000 (12:12 +0100)]
ARM: dts: augment Moxa ART GPIO node
The Moxa ART GPIO is a Faraday FTGPIO010. Augment the DTS node
to indicate both compatible values for the SoC and the IP part.
Also increase the register range to 0x100, it has at least 0x48
bytes of registers, and a few extra will not hurt.
Tested-by: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 31 Mar 2017 09:58:50 +0000 (11:58 +0200)]
Merge tag 'uniphier-dt-v4.12' of git://git./linux/kernel/git/masahiroy/linux-uniphier into next/dt
Pull "UniPhier ARM SoC DT updates for v4.12" from Masahiro Yamada:
- Remove skeleton.dtsi inclusion
- Fix W=* build warnings
- Fix eMMC pin-mux node
- Add pagesize properties to EEPROM nodes
* tag 'uniphier-dt-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
ARM: dts: uniphier: add pagesize property to EEPROM of proto boards
ARM: dts: uniphier: add pagesize property to EEPROM of Support Card
ARM: dts: uniphier: fix pin groups of eMMC pin-mux node
ARM: dts: uniphier: move memory node below aliases node
ARM: dts: uniphier: fix no unit name warnings
ARM: dts: uniphier: remove skeleton.dtsi inclusion
Loic Pallardy [Mon, 27 Mar 2017 16:05:00 +0000 (18:05 +0200)]
ARM: dts: STiH407-family: update rproc node names to avoid conflict
The two st231-rproc nodes have the same name; Due to that it was
impossible to distinguish them in remoteproc sysfs and debugfs
interface.
This patch provides them a name related to their functionality.
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Tony Lindgren [Tue, 28 Mar 2017 21:00:55 +0000 (14:00 -0700)]
Merge branch 'omap-for-v4.12/dt-droid4-v2' into omap-for-v4.12/dt-v2
Yegor Yefremov [Tue, 28 Mar 2017 13:09:16 +0000 (15:09 +0200)]
ARM: dts: am335x-baltos: add LED support
All three devices provide GPIO based LEDs named power,
wlan and app.
Place LEDs definition into a separate dtsi file as not all
devices including am335x-baltos.dtsi have the same LED layout.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Tue, 28 Mar 2017 00:40:20 +0000 (17:40 -0700)]
ARM: dts: omap4-droid4: Fix MMC1 card for detect GPIO and regulator
There's a typo, it should be GPIO176 and not GPIO106.
And it seems I messed up the regulators at some point while trying
to figure out what devices the regulators are used. The correct
regulator for MMC1 is vwlan2.
Fixes:
0d4cb3ccee58 ("ARM: dts: Configure regulators for droid 4")
Reported-by: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Linus Walleij [Sat, 28 Jan 2017 20:15:15 +0000 (21:15 +0100)]
ARM: dts: add PCI to the Gemini device trees
The Cortina Gemini has an internal PCI root bus, add this to
the device tree, and add interrupt mapping (swizzling) to the
relevant systems device trees.
Cc: Janos Laube <janos.dev@gmail.com>
Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Feng-Hsin Chiang <john453@faraday-tech.com>
Cc: Greentime Hu <green.hu@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Florian Fainelli [Fri, 24 Mar 2017 17:12:31 +0000 (10:12 -0700)]
Merge tag 'bcm2835-dt-next-2017-03-21' into devicetree/next
This pull request brings in the DT nodes for enabling HDMI audio on
Raspberry Pi, and nodes to describe the DSI and SDHOST hardware
modules (which are still disabled by default).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Keerthy [Thu, 9 Mar 2017 08:05:59 +0000 (13:35 +0530)]
ARM: dts: OMAP4460: Thermal: Add slope and offset values
Currently the slope and offset values for calculating the
hot spot temperature of a particular thermal zone is part
of driver data. Pass them here instead and obtain the values
while of node parsing.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Keerthy [Thu, 9 Mar 2017 08:05:58 +0000 (13:35 +0530)]
ARM: dts: OMAP443x: Thermal: Add slope and offset values
Currently the slope and offset values for calculating the
hot spot temperature of a particular thermal zone is part
of driver data. Pass them here instead and obtain the values
while of node parsing.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Keerthy [Thu, 9 Mar 2017 08:05:57 +0000 (13:35 +0530)]
ARM: dts: OMAP5: Thermal: Add slope and offset values
Currently the slope and offset values for calculating the
hot spot temperature of a particular thermal zone is part
of driver data. Pass them here instead and obtain the values
while of node parsing.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Keerthy [Thu, 9 Mar 2017 08:05:56 +0000 (13:35 +0530)]
ARM: dts: DRA7: Thermal: Add slope and offset values
Currently the slope and offset values for calculating the
hot spot temperature of a particular thermal zone is part
of driver data. Pass them here instead and obtain the values
while of node parsing.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Keerthy [Thu, 9 Mar 2017 08:05:55 +0000 (13:35 +0530)]
ARM: dts: omap3: Add cpu_thermal zone
Add cpu_thermal zone.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Alexandre TORGUE [Tue, 31 Jan 2017 09:44:25 +0000 (10:44 +0100)]
ARM: dts: stm32: Add STM32H743 MCU and STM32H743i-EVAL board
Add basic support for STM32H743 MCU and his eval board.
The STMicrolectornics's STM32H743 MCU is based on Cortex-M7 core
running up to @400MHz with 2MB internal flash and 1MB internal RAM.
For more details see:
Documentation/arm/stm32/stm32h743-overview.txt
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Vignesh R [Wed, 22 Mar 2017 15:36:34 +0000 (21:06 +0530)]
ARM: dts: am437x-gp-evm: Add pinmux for uart0
Add pinmux for rx,tx,cts and rts lines of uart0. This will enable uart0
to use hardware flow control.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Franklin S Cooper Jr [Tue, 7 Mar 2017 21:57:51 +0000 (15:57 -0600)]
ARM: dts: am335x-icev2: Add SPI based NOR
Enable support for W25Q64CVSSIG which is a Winbond 64 Mbit SPI NOR.
At boot you will see the following message:
m25p80 spi1.0: found s25fl064k, expected w25q64
This is because the JEDEC ID for this chip is the same as s25fl064k.
However, this should be harmless since both chips are essentially the
same.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Sekhar Nori [Tue, 7 Mar 2017 21:57:50 +0000 (15:57 -0600)]
Documentation: devicetree: mtd: add w25q64 to list of supported SPI flashes
W25Q64 is found on TI's AM335x ICEv2 board. Add it to list
for supported SPI flash devices. This flash can be identified
using JEDEC READ ID opcode.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Dave Gerlach [Mon, 6 Mar 2017 15:23:41 +0000 (09:23 -0600)]
ARM: dts: dra7: Add updated operating-points-v2 table for cpu
After the ti-cpufreq driver has been added, we can now drop the
operating-points table present in dra7.dtsi for the cpu and add an
operating-points-v2 table with all OPPs available for all silicon
revisions. Also add necessary data for use by ti-cpufreq to selectively
enable the appropriate OPPs at runtime as part of the operating-points
table.
As we now need to define voltage ranges for each OPP, we define the
minimum and maximum voltage to match the ranges possible for AVS class0
voltage as defined by the DRA7/AM57 Data Manual, with the exception of
using a range for OPP_OD based on historical data to ensure that SoCs
from older lots still continue to boot, even though more optimal voltages
are now the standard. Once an AVS Class0 driver is in place it will be
possible for these OPP voltages to be adjusted to any voltage within the
provided range.
Information from SPRS953, Revised December 2015.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
eviewed-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Dave Gerlach [Mon, 6 Mar 2017 15:23:40 +0000 (09:23 -0600)]
ARM: dts: am4372: Update operating-points-v2 table for cpu
The operatings-points-v2 table for am4372 was merged before any user of
it was present in the kernel and before the binding had been finalized.
The new ti-cpufreq driver and binding expects the platform specific
properties to be part of the operating-points-v2 table rather than the
cpu node so let's move them there as the only user is the ti-cpufreq
driver.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
eviewed-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Dave Gerlach [Mon, 6 Mar 2017 15:23:39 +0000 (09:23 -0600)]
ARM: dts: am335x-boneblack: Enable 1GHz OPP for cpu
Although all PG2.0 silicon may not support 1GHz OPP for the MPU, older
Beaglebone Blacks may have PG2.0 silicon populated and these particular
parts are guaranteed to support the OPP, so enable it for PG2.0 on
am335x-boneblack only.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
eviewed-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Dave Gerlach [Mon, 6 Mar 2017 15:23:38 +0000 (09:23 -0600)]
ARM: dts: am33xx: Add updated operating-points-v2 table for cpu
After the ti-cpufreq driver has been added, we can now drop the
operating-points table present in am33xx.dtsi for the cpu and add an
operating-points-v2 table with all OPPs available for all silicon
revisions. Also add necessary data for use by ti-cpufreq to selectively
enable the appropriate OPPs at runtime as part of the operating-points
table.
Information from AM335x Data Manual, SPRS717i, Revised December 2015,
Table 5-7.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
eviewed-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Bartosz Golaszewski [Tue, 14 Mar 2017 11:14:14 +0000 (12:14 +0100)]
ARM: dts: dm8168-evm: add SATA node
Add the SATA controller node to the dm8168-evm device tree.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Bartosz Golaszewski [Tue, 14 Mar 2017 11:14:13 +0000 (12:14 +0100)]
ARM: dts: dm8168-evm: add the external reference clock for SATA
This board has an external oscillator supplying the reference clock
signal for SATA. Its rate is fixed at 100Mhz. Add a corresponding
device tree node.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Fabrice Gasnier [Thu, 26 Jan 2017 14:28:00 +0000 (15:28 +0100)]
ARM: dts: stm32: Enable pwm1 and pwm3 on stm32f429i-eval
Define and enable pwm1 and pwm3, timers1 & 3 trigger outputs on
on stm32f429i-eval board.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Fabrice Gasnier [Thu, 23 Mar 2017 17:14:58 +0000 (18:14 +0100)]
ARM: dts: stm32: Enable dma by default on stm32f4 adc
Configure STM32F4 ADC to use dma by default.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Amelie Delaunay [Thu, 23 Mar 2017 13:32:21 +0000 (14:32 +0100)]
ARM: dts: stm32: enable RTC on stm32746g-eval
This patch enables RTC on stm32746g-eval with default LSE clock source.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Amelie Delaunay [Thu, 19 Jan 2017 13:45:00 +0000 (14:45 +0100)]
ARM: dts: stm32: Add RTC support for STM32F746 MCU
This patch adds STM32 RTC bindings for STM32F746.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Amelie Delaunay [Thu, 23 Mar 2017 13:28:40 +0000 (14:28 +0100)]
ARM: dts: stm32: set HSE_RTC clock frequency to 1 MHz on stm32f746
This patch set HSE_RTC clock frequency to 1 MHz, as the clock supplied to
the RTC must be 1 MHz.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Gabriel Fernandez [Thu, 23 Mar 2017 16:33:40 +0000 (17:33 +0100)]
dt-bindings: mfd: Add STM32F7 RCC numeric constants into DT include file
This patch lists STM32F7's RCC numeric constants.
It will be used by clock and reset drivers, and DT bindings.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Gabriel Fernandez [Thu, 23 Mar 2017 16:35:50 +0000 (17:35 +0100)]
ARM: dts: stm32: Enable clocks for STM32F746 MCU
This patch enables clocks for STM32F746 MCU.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Ralph Sennhauser [Thu, 16 Mar 2017 05:53:19 +0000 (06:53 +0100)]
ARM: dts: mvebu: linksys: enable buffer manager support
Add appropriate properties to devices in the Linksys WRT AC Series for the
mvneta driver to use hardware buffer management.
Also update "soc" ranges property and set the status of bm and bm-bppi
to "okay" (SRAM).
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Sebastian Reichel [Tue, 21 Mar 2017 22:32:16 +0000 (23:32 +0100)]
ARM: dts: N9/N950: add bluetooth
The Nokia N950 and N9 have a wl1271 (with nokia bootloader) bluetooth
module connected to second UART.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Sebastian Reichel [Tue, 21 Mar 2017 22:32:15 +0000 (23:32 +0100)]
ARM: dts: N900: Add bluetooth
Add bcm2048 node and its system clock to the N900 device tree file.
Apart from that a reference to the new clock has been added to
wl1251 (which uses it, too).
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Rob Herring [Wed, 22 Mar 2017 02:03:08 +0000 (21:03 -0500)]
ARM: dts: bcm: fix msi-controller name and unit address
The unit address for the msi controller is not valid as there is no reg
property, so remove it. Also, msi-controller is the preferred node name.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Jon Mason <jonmason@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Rafał Miłecki [Wed, 15 Mar 2017 17:03:28 +0000 (18:03 +0100)]
ARM: dts: BCM53573: Specify serial console parameters
This adds baud rate, parity & number of data bits. It's required to get
serial working correctly.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Rafał Miłecki [Wed, 15 Mar 2017 17:03:27 +0000 (18:03 +0100)]
ARM: dts: BCM5301X: Specify serial console params in dtsi files
So far every Northstar device we have seen was using the same serial
console params (115200n8). It probably make the most sense to put it in
some proper dtsi files instead of repeating over and over for every
single device. As different boards may use different bootloaders it
seems the safest idea is to use board specific dtsi files.
Just in case some vendor decides to use different UART (parameters) this
can be always easily overwritten.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Tony Lindgren [Wed, 15 Mar 2017 00:39:42 +0000 (17:39 -0700)]
ARM: dts: omap4-droid4: Configure EHCI so modems can be accessed
Droid 4 has two modems, mdm6600 and w3glte. Both are on the HCI USB
controller.
Let's add a configuration for the HCI so the modems can be enabled.
Note that the modems still need additional GPIO based configuration.
Cc: devicetree@vger.kernel.org
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Tested-by: Sebastian Reichel <sre@kernel.org>
[tony@atomide.com: left out url]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Sebastian Reichel [Sun, 5 Mar 2017 17:22:34 +0000 (18:22 +0100)]
ARM: dts: motorola-cpcap-mapphone: add LEDs
Add LEDs.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 6 Mar 2017 04:11:59 +0000 (20:11 -0800)]
ARM: dts: omap4-droid4: Add LCD
The LCD panel on droid 4 is a command mode LCD. The binding follows
the standard omapdrm binding and the changes needed for omapdrm command
mode panels are posted separately.
Cc: devicetree@vger.kernel.org
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 6 Mar 2017 04:11:59 +0000 (20:11 -0800)]
ARM: dts: omap4-droid4: Add HDMI support
We can get HDMI working as long as the 5V regulator is on. There is
probably an encoder chip there too, but so far no idea what it might be.
Let's keep the 5V HDMI regulator always enabled for now as otherwise we
cannot detect the monitor properly.
Cc: devicetree@vger.kernel.org
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 6 Mar 2017 04:11:58 +0000 (20:11 -0800)]
ARM: dts: omap4-droid4: Add tmp105 sensor for droid 4
Add tmp105 sensor for droid 4. This can be used with modprobe
lm75.ko and running sensors from lm-sensors package. Note that
the lm75.c driver does not yet support alert interrupt but
droid 4 seems to be wired for it.
Cc: devicetree@vger.kernel.org
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Tested-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 6 Mar 2017 04:11:58 +0000 (20:11 -0800)]
ARM: dts: omap4-droid4: Add GPIO poweroff
Droid 4 has a GPIO line that we can use with CONFIG_POWER_RESET_GPIO.
It is probably connected to the CPCAP PMIC, and seems to power down
the whole device taking power consumption to zero based on what
I measured.
Cc: devicetree@vger.kernel.org
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Tested-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 6 Mar 2017 04:11:58 +0000 (20:11 -0800)]
ARM: dts: omap4-droid4: Add LCD backlight
The TI LMU driver has not yet been merged, but the device
tree binding for TI LMU drivers has been acked already
earlier by Rob Herring <robh+dt@kernel.org>. So it should
be safe to apply to cut down the number of pending patches.
Cc: devicetree@vger.kernel.org
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Acked-by: Milo Kim <milo.kim@ti.com>
Tested-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Alexander Kochetkov [Tue, 21 Mar 2017 15:13:47 +0000 (18:13 +0300)]
ARM: dts: rockchip: setup DMA-channels for mmc0 and emmc for rk3188
This commit enable DMA-based transfers for SD/eMMC card adapters
and reduce number of interrupts produced by SD-card/eMMC-card
adapters.
Sometimes interrupts from SD-card/eMMC-card adapters running in
PIO mode blocks execution of hrtimers and I2S DMA callbacks for
a long periods (100 ms or more).
Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
[moved dma properties to rk3xxx.dtsi and added sdio dma]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Linus Walleij [Sun, 12 Mar 2017 23:20:45 +0000 (00:20 +0100)]
ARM: dts: augment Gemini GPIO nodes
The binding should state "cortina,gemini-gpio", "faraday,ftgpio010"
stating the full name of the IP part.
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Heiko Stuebner [Tue, 21 Mar 2017 23:05:16 +0000 (00:05 +0100)]
ARM: dts: rockchip: fix PPI misconfiguration on Cortex-A9 socs
According to [0] pointed out by Marc Zyngier in a report about a
similar error message, PPIs 11 and 13 are edge triggered on
Cortex-A9 socs including the rk3066 and rk3188 which currently
mark them as level triggered.
Until some time ago the gic did not care but commit
992345a58e0c
("irqchip/gic: WARN if setting the interrupt type for a PPI fails")
introduced a warning for that case.
Fix the warning on these socs by describing the interrupts correctly
and also using the binding constants for easier reading in the future.
[0] http://infocenter.arm.com/help/topic/com.arm.doc.ddi0407f/CCHEIGIC.html
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Olof Johansson [Wed, 22 Mar 2017 00:38:11 +0000 (17:38 -0700)]
Merge tag 'renesas-dt-bindings-for-v4.12' of https://git./linux/kernel/git/horms/renesas into next/dt
Renesas ARM Based SoC DT Bindings Updates for v4.12
* Document RZ/G1N and RZ/G1H SoC DT bindings
* tag 'renesas-dt-bindings-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Document RZ/G1N SoC DT binding
ARM: shmobile: Document RZ/G1H SoC DT binding
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 22 Mar 2017 00:35:06 +0000 (17:35 -0700)]
Merge tag 'renesas-dt-for-v4.12' of https://git./linux/kernel/git/horms/renesas into next/dt
Renesas ARM Based SoC DT Updates for v4.12
Cleanup:
* Drop superfluous status update for frequency override on various boards
* Always use status "okay" to enable devices on porger board
* Add INTC-SYS clock to device tree of various SoCs
* Tidyup Audio-DMAC channel for DVC on r8a779[013] SoCs
* Remove unit-address and reg from integrated cache on various SoCs
* Switch from ARCH_SHMOBILE_MULTI to ARCH_RENESAS
* Fix SCIFB0 dmas indentation on r8a774[35] SoCs
Enhancements:
* Add watchdog timer to r7s72100 SoC
* Update sdhi clock bindings on r7s72100 SoC
* tag 'renesas-dt-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (31 commits)
ARM: dts: silk: Drop superfluous status update for frequency override
ARM: dts: alt: Drop superfluous status update for frequency override
ARM: dts: gose: Drop superfluous status update for frequency override
ARM: dts: porter: Drop superfluous status update for frequency override
ARM: dts: koelsch: Drop superfluous status updates for frequency overrides
ARM: dts: lager: Drop superfluous status update for frequency override
ARM: dts: marzen: Drop superfluous status update for frequency override
ARM: dts: bockw: Drop superfluous status update for frequency override
ARM: dts: porter: Always use status "okay" to enable devices
ARM: dts: r8a7793: Add INTC-SYS clock to device tree
ARM: dts: r8a7793: Tidyup Audio-DMAC channel for DVC
ARM: dts: r8a7791: Tidyup Audio-DMAC channel for DVC
ARM: dts: r8a7794: Add INTC-SYS clock to device tree
ARM: dts: r8a7792: Add INTC-SYS clock to device tree
ARM: dts: r8a7791: Add INTC-SYS clock to device tree
ARM: dts: r8a7790: Add INTC-SYS clock to device tree
ARM: dts: r8a73a4: Add INTC-SYS clock to device tree
ARM: dts: r7s72100: Add watchdog timer
ARM: dts: r8a7790: Tidyup Audio-DMAC channel for DVC
ARM: dts: r8a7794: Remove unit-address and reg from integrated cache
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Linus Walleij [Sat, 18 Mar 2017 16:40:01 +0000 (17:40 +0100)]
ARM: dts: Adjust moxart IRQ controller and flags
The moxart interrupt line flags were not respected in previous
driver: instead of assigning them per-consumer, a fixes mask
was set in the controller.
With the migration to a standard Faraday driver we need to
set up and handle the consumer flags correctly. Also remove
the Moxart-specific flags when switching to using real consumer
flags.
Extend the register window to 0x100 bytes as we may have a few
more registers in there and it doesn't hurt.
Tested-by: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 22 Mar 2017 00:21:44 +0000 (17:21 -0700)]
Merge branch 'shared/dt-symlinks' into next/dt
* shared/dt-symlinks:
arm64: dts: add arm/arm64 include symlinks
ARM: dts: add arm/arm64 include symlinks
Signed-off-by: Olof Johansson <olof@lixom.net>
Heiko Stuebner [Sun, 26 Feb 2017 06:00:58 +0000 (07:00 +0100)]
arm64: dts: add arm/arm64 include symlinks
Allow including of dtsi files in an architecture-independent manner.
Some dtsi files may be shared between architectures and one suggestion
was to have symlinks and let these includes get accessed via a
#include <arm64/foo.dtsi>
So add the necessary symlinks for arm32.
Suggested-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Heiko Stuebner [Sun, 26 Feb 2017 06:00:57 +0000 (07:00 +0100)]
ARM: dts: add arm/arm64 include symlinks
Allow including of dtsi files in an architecture-independent manner.
Some dtsi files may be shared between architectures and one suggestion
was to have symlinks and let these includes get accessed via a
#include <arm64/foo.dtsi>
So add the necessary symlinks for arm32.
Suggested-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Linus Walleij [Mon, 30 Jan 2017 19:21:49 +0000 (20:21 +0100)]
ARM: dts: add power controller to the Gemini DTS
This adds the Gemini power controller to the SoC DTSI
file.
Cc: Janos Laube <janos.dev@gmail.com>
Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Steve Lin [Wed, 22 Feb 2017 21:22:23 +0000 (16:22 -0500)]
ARM: dts: NSP: Add crypto (SPU) to dtsi
Adds crypto hardware (SPU) to Northstar Plus device tree file.
Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Steve Lin [Thu, 23 Feb 2017 14:49:51 +0000 (09:49 -0500)]
ARM: dts: NSP: Add mailbox (PDC) to NSP
Adds mailbox / PDC to NSP device tree. Needs new compatibility string
to differentiate from NS2 version.
Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Steve Lin [Wed, 15 Mar 2017 20:59:35 +0000 (16:59 -0400)]
ARM: dts: BCM953012HR: Add ethernet aliases
Adding ethernet aliases. These are used, for example, by bootloaders,
to modify the MAC addresses in the device tree.
Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Rafał Miłecki [Tue, 14 Mar 2017 10:39:41 +0000 (11:39 +0100)]
ARM: dts: BCM5301X: Add support for TP-LINK Archer C5 V2
This is BCM47081A0 based home router with BCM43217 and BCM4352 wireless
chipsets.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Jon Mason [Tue, 7 Mar 2017 23:34:55 +0000 (18:34 -0500)]
ARM: dts: NSP: disable i2c DT entry by default
The i2c device tree entry should be disabled by default to match the
current convention in other device tree files. Similarily, enable it on
the XMC board, where it is being used.
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Jon Mason [Tue, 7 Mar 2017 23:34:04 +0000 (18:34 -0500)]
ARM: dts: NSP: Add EHCI/OHCI USB nodes to device tree
Add the EHCI and OHCI entries to the Northstar Plus device tree files.
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Jon Mason [Mon, 6 Mar 2017 16:24:45 +0000 (11:24 -0500)]
ARM: dts: BCM5301X: Add I2C support to the DT
Add I2C support to the bcm5301x Device Tree. Since no driver changes
are needed to enable this hardware, only the device tree changes are
required to make this functional.
Signed-off-by: Jon Mason <jonmason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Jon Mason [Mon, 6 Mar 2017 16:24:44 +0000 (11:24 -0500)]
ARM: dts: BCM5301X: Add TWD WD Support to DT
Add support for the ARM TWD Watchdog to the bcm5301x device tree. The
ARM TWD timer allocated the register space for the WDT, so this patch
necessitated shrinking that. Also, the GIC masks were added for these.
Signed-off-by: Jon Mason <jonmason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Jon Mason [Fri, 3 Mar 2017 00:21:32 +0000 (19:21 -0500)]
ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags
GIC_PPI flags were misconfigured for the timers, resulting in errors
like:
[ 0.000000] GIC: PPI11 is secure or misconfigured
Changing them to being edge triggered corrects the issue
Suggested-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Fixes:
d27509f1 ("ARM: BCM5301X: add dts files for BCM4708 SoC")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Gerd Hoffmann [Wed, 8 Mar 2017 09:19:05 +0000 (10:19 +0100)]
ARM: dts: bcm2835: add sdhost controller to devicetree
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Ladislav Michl [Fri, 17 Mar 2017 19:12:00 +0000 (12:12 -0700)]
ARM: dts: omap3-igep: OneNAND support
Add OneNAND node for IGEP and leave it disabled by default. It is up
to bootloader to enable proper node. Timing just works, but values are
copied over from N900 as I was unable to find chip datasheet.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Yegor Yefremov [Fri, 17 Mar 2017 19:11:55 +0000 (12:11 -0700)]
ARM: dts: AM35x: Add hecc node
HECC node description for am35x SOCs
Signed-off-by: Anton Glukhov <anton.a.glukhov@gmail.com>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Boris Brezillon [Thu, 2 Feb 2017 10:37:36 +0000 (11:37 +0100)]
ARM: dts: bcm283x: Add HDMI audio related properties
Add the dmas and dma-names properties to support HDMI audio.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Heiko Stuebner [Wed, 1 Mar 2017 23:50:39 +0000 (00:50 +0100)]
ARM: dts: rockchip: add rk322x dw-mmc resets
dw-mmc got its reset-properties specified, so add the softresets
for it in rk3228/rk3229.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviwed-by: Shawn Lin <shawn.lin@rock-chips.com>
Heiko Stuebner [Wed, 1 Mar 2017 23:43:21 +0000 (00:43 +0100)]
ARM: dts: rockchip: add rk3066/rk3188 dw-mmc resets
dw-mmc got its reset-properties specified, so add the softresets
for it in rk3066/rk3188.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviwed-by: Shawn Lin <shawn.lin@rock-chips.com>
Heiko Stuebner [Wed, 1 Mar 2017 23:42:52 +0000 (00:42 +0100)]
ARM: dts: rockchip: add rk3036 dw-mmc resets
dw-mmc got its reset-properties specified, so add the softresets
for it in rk3036.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviwed-by: Shawn Lin <shawn.lin@rock-chips.com>
Heiko Stuebner [Wed, 1 Mar 2017 23:26:51 +0000 (00:26 +0100)]
ARM: dts: rockchip: add rk3288 dw-mmc resets
dw-mmc got its reset-properties specified, so add the softresets
for it in rk3288.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviwed-by: Shawn Lin <shawn.lin@rock-chips.com>
Olof Johansson [Mon, 13 Mar 2017 23:06:38 +0000 (16:06 -0700)]
Merge tag 'gemini-dts-base' of git://git./linux/kernel/git/linusw/linux-nomadik into next/dt
Base patches for Gemini device trees:
- Bindings for the platform.
- Device trees for everything that was available as board
files previously.
- New device tree for my target system SQ201.
- Device tree bindings for the watchdog. The driver was merged
to the watchdog subsystem so this was probably just missed
by the maintainer, and it is ACKed by Rob Herring.
* tag 'gemini-dts-base' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: add watchdog to the Gemini
watchdog: add DT bindings for Cortina Gemini
ARM: dts: add a devicetree for Wiliboard WBD-222
ARM: dts: add a devicetree for Wiliboard WBD-111
ARM: dts: add a devicetree for Teltonika RUT1xx
ARM: dts: add a devicetree for Raidsonic NAS IB-4220-B
ARM: dts: add device tree for Gemini SoC and SQ201
ARM: dts: add top-level DT bindings for Cortina Gemini
Signed-off-by: Olof Johansson <olof@lixom.net>
Masahiro Yamada [Mon, 13 Mar 2017 19:56:32 +0000 (04:56 +0900)]
ARM: dts: uniphier: add pagesize property to EEPROM of proto boards
ST's spec says the page size of 24C64 is 32 byte.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Mon, 13 Mar 2017 19:47:54 +0000 (04:47 +0900)]
ARM: dts: uniphier: add pagesize property to EEPROM of Support Card
Microchip's spec says the page size of 24LC128 is 64 byte.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Geert Uytterhoeven [Fri, 10 Mar 2017 13:48:28 +0000 (14:48 +0100)]
ARM: shmobile: Document RZ/G1N SoC DT binding
Document the RZ/G1N (r8a7744) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Fri, 10 Mar 2017 13:48:27 +0000 (14:48 +0100)]
ARM: shmobile: Document RZ/G1H SoC DT binding
Document the RZ/G1H (r8a7742) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Fri, 10 Mar 2017 13:19:12 +0000 (14:19 +0100)]
ARM: dts: silk: Drop superfluous status update for frequency override
The scif_clk device node is already enabled in r8a7794.dtsi, so there is
no need to update its status again.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Fri, 10 Mar 2017 13:19:11 +0000 (14:19 +0100)]
ARM: dts: alt: Drop superfluous status update for frequency override
The scif_clk device node is already enabled in r8a7794.dtsi, so there is
no need to update its status again.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Fri, 10 Mar 2017 13:19:10 +0000 (14:19 +0100)]
ARM: dts: gose: Drop superfluous status update for frequency override
The scif_clk device node is already enabled in r8a7793.dtsi, so there is
no need to update its status again.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Fri, 10 Mar 2017 13:19:09 +0000 (14:19 +0100)]
ARM: dts: porter: Drop superfluous status update for frequency override
The pcie_bus_clk device node is already enabled in r8a7791.dtsi, so
there is no need to update its status again.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Fri, 10 Mar 2017 13:19:08 +0000 (14:19 +0100)]
ARM: dts: koelsch: Drop superfluous status updates for frequency overrides
The scif_clk and pcie_bus_clk device nodes are already enabled in
r8a7791.dtsi, so there is no need to update their statuses again.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Fri, 10 Mar 2017 13:19:07 +0000 (14:19 +0100)]
ARM: dts: lager: Drop superfluous status update for frequency override
The scif_clk device node is already enabled in r8a7790.dtsi, so there is
no need to update its status again.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Fri, 10 Mar 2017 13:19:06 +0000 (14:19 +0100)]
ARM: dts: marzen: Drop superfluous status update for frequency override
The scif_clk device node is already enabled in r8a7779.dtsi, so there is
no need to update its status again.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Fri, 10 Mar 2017 13:19:05 +0000 (14:19 +0100)]
ARM: dts: bockw: Drop superfluous status update for frequency override
The scif_clk device node is already enabled in r8a7778.dtsi, so there is
no need to update its status again.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Fri, 10 Mar 2017 13:19:04 +0000 (14:19 +0100)]
ARM: dts: porter: Always use status "okay" to enable devices
While status "ok" does work, the canonical form is "okay", so update the
few places that used the former.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Mon, 6 Mar 2017 16:58:10 +0000 (17:58 +0100)]
ARM: dts: r8a7793: Add INTC-SYS clock to device tree
Link the ARM GIC to the INTC-SYS module clock, and add it to the "always
on" PM Domain, so it can be power managed using that clock.
Note that currently the GIC-400 driver doesn't support module clocks nor
Runtime PM, so this must be handled as a critical clock.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Linus Torvalds [Sun, 12 Mar 2017 21:47:08 +0000 (14:47 -0700)]
Linux 4.11-rc2
Linus Torvalds [Sun, 12 Mar 2017 21:22:25 +0000 (14:22 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
- four patches to get the new cputime code in shape for s390
- add the new statx system call
- a few bug fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: wire up statx system call
KVM: s390: Fix guest migration for huge guests resulting in panic
s390/ipl: always use load normal for CCW-type re-IPL
s390/timex: micro optimization for tod_to_ns
s390/cputime: provide archicture specific cputime_to_nsecs
s390/cputime: reset all accounting fields on fork
s390/cputime: remove last traces of cputime_t
s390: fix in-kernel program checks
s390/crypt: fix missing unlock in ctr_paes_crypt on error path