drm/amdgpu: move mes self test after drm sched re-started

mes self test rely on vm mapping, move it after
drm sched re-started so that vm mapping can work
during gpu reset.

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-and-tested-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: drop non-necessary call trace dump

This extra call trace dump comes out in every gpu reset.
And it gives people a wrong impression that something
went wrong. Although actually there was not.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable VCN cg and JPEG cg/pg

Not enable VCN pg because encode issue

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: vcn_4_0_2 video codec query

Enable support for vcn_4_0_2 video codec

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add VCN_4_0_2 firmware support

Add VCN_4_0_2 firmware support

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add VCN function in NBIO v7.7

Add function to support VCN_4_0_2 doorbell

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix a vcn4 boot poll bug in emulation mode

The return value should be set in vcn4 boot poll.

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: add memory training support for PSP_V13

Add PSP_V13 memory training support funcs.

v2: replace DRM_{DEBUG/ERROR} with dev_{dbg/err}. (Hawking)
v3: fix checkpatch error (Alex)

Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: remove an unnecessary amdgpu_bo_ref

No need to reference the BO here, dmabuf framework will handle that.

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Add get_gfx_off_status interface for yellow carp

add get_gfx_off_status interface to yellow_carp_ppt_funcs structure.

Signed-off-by: Shikai Guo <shikai.guo@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Prike Liang <prike.liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove unused struct freesync_context

All references to struct freesync_context were removed, so remove the
struct freesync_context itself and its entry on struct dc_stream_state.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: add additional page fault settings for gfx11

Add three additional page fault settings.

V2: move reg offset definition to header file. (Alex)
V3: add all shift/mask definitions of used reg. (Hawking)

Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unneeded semicolon

Eliminate the following coccicheck warning:
./drivers/gpu/drm/amd/display/dc/dml/dcn20/dcn20_fpu.c:2344:67-68: Unneeded semicolon

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix i2s_pdata out of bound array access

Fixed following Smatch static checker warning:

    drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:393 acp_hw_init()
    error: buffer overflow 'i2s_pdata' 3 <= 3
    drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:396 acp_hw_init()
    error: buffer overflow 'i2s_pdata' 3 <= 3

Fixes: 4c33e5179ff1 ("drm/amdgpu: create I2S platform devices for Jadeite platform")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: fix kgd_mem memory leak when importing dmabuf

The kgd_mem memory allocated in amdgpu_amdkfd_gpuvm_import_dmabuf()
is not freed properly.

Explicitly free it in amdgpu_amdkfd_gpuvm_free_memory_of_gpu()
under condition "mem->bo->kfd_bo != mem".

Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add debugfs for kfd system and ttm mem used

This keeps track of kfd system mem used and kfd ttm mem used.

Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: track unified memory reservation with xnack off

[WHY]
Unified memory with xnack off should be tracked, as userptr mappings
and legacy allocations do. To avoid oversuscribe system memory when
xnack off.
[How]
Exposing functions reserve_mem_limit and unreserve_mem_limit to SVM
API and call them on every prange creation and free.

Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix signedness bug in execute_synaptics_rc_command()

The "ret" variable needs to be signed for the error handling to work.

Fixes: 2ca97adccdc9 ("drm/amd/display: Add Synaptics Fifo Reset Workaround")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up some inconsistent indenting

No functional modification involved.

smatch warnings:

drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:1372 dp_dsc_clock_en_read() warn: inconsistent indenting.
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:1478 dp_dsc_clock_en_write() warn: inconsistent indenting.
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:1563 dp_dsc_slice_width_read() warn: inconsistent indenting.
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:1667 dp_dsc_slice_width_write() warn: inconsistent indenting.
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:1752 dp_dsc_slice_height_read() warn: inconsistent indenting.
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:1856 dp_dsc_slice_height_write() warn: inconsistent indenting.
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:1937 dp_dsc_bits_per_pixel_read() warn: inconsistent indenting.
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:2038 dp_dsc_bits_per_pixel_write() warn: inconsistent indenting.
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:2117 dp_dsc_pic_width_read() warn: inconsistent indenting.
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:2178 dp_dsc_pic_height_read() warn: inconsistent indenting.
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:2254 dp_dsc_chunk_size_read() warn: inconsistent indenting.
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:2330 dp_dsc_slice_bpg_offset_read() warn: inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up some inconsistent indenting

Clean up some inconsistent indenting, replace sizeof(x) / sizeof((x)[0]))
with ARRAY_SIZE(x).

smatch warnings:

drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn30/dcn30_fpu.c:185 optc3_fpu_set_vrr_m_const() warn: inconsistent indenting.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn30/dcn30_fpu.c:355 dcn30_fpu_set_mcif_arb_params() warn: inconsistent indenting.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn30/dcn30_fpu.c:384 dcn30_fpu_calculate_wm_and_dlg() warn: inconsistent indenting.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn30/dcn30_fpu.c:390 dcn30_fpu_calculate_wm_and_dlg() warn: inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up some inconsistent indenting

No functional modification involved.

smatch warnings:

drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn303/dcn303_fpu.c:205 dcn303_fpu_update_bw_bounding_box() warn: inconsistent indenting.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn303/dcn303_fpu.c:355 dcn303_fpu_init_soc_bounding_box() warn: inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up some inconsistent indenting

No functional modification involved.

smatch warning:

drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_util_32.c:713 dml32_CalculateSwathWidth() warn: inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up some inconsistent indenting

No functional modification involved.

smatch warnings:

drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_rq_dlg_calc_32.c:51 dml32_rq_dlg_get_rq_reg() warn: inconsistent indenting.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_rq_dlg_calc_32.c:68 dml32_rq_dlg_get_rq_reg() warn: inconsistent indenting.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_rq_dlg_calc_32.c:220 dml32_rq_dlg_get_dlg_reg() warn: inconsistent indenting.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_rq_dlg_calc_32.c:224 dml32_rq_dlg_get_dlg_reg() warn: inconsistent indenting.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_rq_dlg_calc_32.c:235 dml32_rq_dlg_get_dlg_reg() warn: inconsistent indenting.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_rq_dlg_calc_32.c:240 dml32_rq_dlg_get_dlg_reg() warn: inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up some inconsistent indenting

No functional modification involved.

smatch warning:

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_hwseq.c:1728 dcn20_program_front_end_for_ctx() warn: inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up some inconsistent indenting

No functional modification involved.

smatch warnings:

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_dpp_cm.c:450 dpp20_get_blndgam_current() warn: inconsistent indenting.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_dpp_cm.c:543 dpp20_get_shaper_current() warn: inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up some inconsistent indenting

No functional modification involved.

smatch warnings:

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_mpc.c:305 mpc20_get_ogam_current() warn: inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up some inconsistent indenting

No functional modification involved.

smatch warning:

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_dwb.c:104 dwb2_enable() warn: inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up some inconsistent indenting

No functional modification involved.

smatch warning:

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_optc.c:186 optc3_set_dsc_config() warn: inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up some inconsistent indenting

No functional modification involved.

smatch warnings:

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_mpc.c:116 mpc3_get_ogam_current() warn: inconsistent indenting.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_mpc.c:445 mpc3_get_shaper_current() warn: inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up some inconsistent indenting

No functional modification involved.

smatch warnings:

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_dpp.c:724 dpp3_get_blndgam_current() warn: inconsistent indenting.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_dpp.c:823 dpp3_get_shaper_current() warn: inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up some inconsistent indenting

No functional modification involved.

smatch warning:

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_dpp_cm.c:67 dpp30_get_gamcor_current() warn: inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up some inconsistent indenting

No functional modification involved.

smatch warning:

drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c:726 dcn31_clk_mgr_construct() warn: inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up some inconsistent indenting

No functional modification involved.

smatch warning:

drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c:655 dcn315_clk_mgr_construct() warn: inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up some inconsistent indenting

No functional modification involved.

smatch warning:

drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn316/dcn316_clk_mgr.c:683 dcn316_clk_mgr_construct() warn: inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up some inconsistent indenting

No functional modification involved.

smatch warning:

drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn201/dcn201_clk_mgr.c:107 dcn201_update_clocks() warn: inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up some inconsistent indenting

No functional modification involved.

smatch warnings:

drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn314/dcn314_clk_mgr.c:716 dcn314_clk_mgr_construct() warn: inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up some inconsistent indenting

No functional modification involved.

smatch warnings:

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_mpc.c:306 mpc32_get_shaper_current() warn: inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up some inconsistent indenting

No functional modification involved.

smatch warning:

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hwseq.c:910 dcn32_init_hw() warn: inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Split giant svm range

Giant svm range split to smaller ranges, align the range start address
to max svm range pages to improve MMU TLB usage.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Set svm range max pages

This will be used to split giant svm range into smaller ranges, to
support VRAM overcommitment by giant range and improve GPU retry fault
recover on giant range.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Allow TTM to evict svm bo from same process

To support SVM range VRAM overcommitment, TTM should be able to evict
svm bo of same process to system memory, to get space to alloc new svm
bo.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix the incomplete product number

The comments say that the product number is a 16-digit HEX string so the
buffer needs to be at least 17 characters to hold the NUL terminator. Expand
the buffer size to 20 to avoid the alignment issues.

The comment:Product number should only be 16 characters. Any
more,and something could be wrong. Cap it at 16 to be safe

Signed-off-by: Roy Sun <Roy.Sun@amd.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use adev_to_drm for consistency

Keep code consistency when accessing drm_device from amdgpu driver.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/dc/dce: fix repeated words in comments

Delete the redundant word 'in'.

Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'topic/nouveau-misc-2022-07-27' of git://anongit.freedesktop.org/drm/drm into drm-next

drm/nouveau-misc: display patches.

These are just some precursor and cleanup display patches from Ben,
tested by Lyude.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAPM=9ty0R37q0mohBr_CegpYLXK2=fAH54QfAsMhHfPygTsdQA@mail.gmail.com

Merge tag 'amd-drm-next-5.20-2022-07-26' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amdgpu:
- VCN4 fixes
- RAS support for UMC 8.10
- ACP support for jadeite platforms
- NBIO HDP flush fixes
- Misc spelling and grammar fixes
- Runtime PM fixes
- Non-DC HPD fix
- Clean up amdgpu DM code
- DSC fixes
- Expose some additional GFXOFF data via debugfs
- More FP clean up for new DCN blocks
- PPC DC FP fixes
- DCN 3.1.4 fixes
- DC DML stack usage fixes
- GMC fixes
- SPM fixes for RDNA2

amdkfd:
- MMU notifier fix
- Mutex fix

UAPI:
- Add a comment about VCN4 unified queues
- IP version information for UMDs
  Proposed mesa change: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17411/diffs?commit_id=c8a63590dfd0d64e6e6a634dcfed993f135dd075

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220726181536.5759-1-alexander.deucher@amd.com

drm/nouveau/disp: move DAC load detection method

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: add output class

Will be used to more cleanly implement existing method interfaces that
take some confusing (IEDTkey, inherited from VBIOS, which RM no longer
uses on Ampere) match values to determine which display path to operate
on.

Methods will be protected from racing with supervisor, and from being
called where they shouldn't be (ie. without an OR assigned).

v2:
- use ?: (lyude)
v3:
- fix return code if noacquire() method fails

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: add supervisor mutex

Will be used to protect NVIF_CLASS_OUTP method calls from racing with
in-progress supervisor handling.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: add conn method to query HPD pin status

And use it to bail early in DP detection and avoid futile AUX transactions.

This could be used on other connector types too in theory, but it's not
something we've ever done before and I'd rather not risk breaking working
systems without looking into it more closely.

It's safe for DP though.  We already do this by checking an AUX register
that contains HPD status and aborting the transaction.  However, this is
much deeper in the stack - after taking various mutexes, poking HW for no
good reason, and making a mess in debug logs.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: add connector class

Will be used to provide more solid driver interfaces in general, but
the immediate motivation is work towards fixing issues with handling
hotplug/DP IRQ events.

Its use is currently limited to where we support non-polled hotplug
already (ie. any GPU since NV40ish era, where our DCB handling works
well enough), until that gets cleaned up someday.

v2:
- use ?: (lyude)

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: add common channel class handling

Replaces a bunch of unnecessarily duplicated boilerplate in per-chipset
code with a simpler, common, implementation.

Channel "awaken" notify code is completely gone for now.  KMS has never
made use of it so far, and event notify handling is about to be changed
in general anyway.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: split sor hda funcs out to their own struct

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: split sor dp funcs out to their own struct

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: replace hda func pointer check with flag

Simpler, and less error-prone than a separate set of function pointers.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: merge nv50_disp_new_() and nvkm_disp_new()

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: group supervisor-related struct members

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: merge head/outp/ior code into chipset files

No changes to code at all here, just shuffling it around and removing
a bunch of (now unnecessary) forward-declarations from headers.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: add common class handling between <nv50 and >=nv50

About to expose head/output path/connector objects everywhere, so we will
need support for child classes prior to nv50 now.

Somewhat cleaner than the code >=nv50 used previously.

v2:
- use ?: (lyude)

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: collapse nv50_disp into nvkm_disp

Dump of one struct's members into another, with a couple of list
renames because of collisions.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: collapse nv50_disp_func into nvkm_disp_func

Aside from a chicken-and-egg problem with a duplicate 'root' member,
this is a straight dump of function pointers from one struct into
another.

The left-over wrapping mess in >=nv50 structs will be fixed later.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: clean up nvkm_outp constructors

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: collapse nvkm_dp into nvkm_outp

There should be no changes to code here other than modifying the
dereferences.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/amd/display: Reduce stack size in the mode support function

When we use the allmodconfig option we see the following error:

drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c: In function 'dml32_ModeSupportAndSystemConfigurationFull':
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:3799:1: error: the frame size of 2464 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
  3799 | } // ModeSupportAndSystemConfigurationFull

This commit fixes this issue by moving part of the mode support
operation from ModeSupportAndSystemConfigurationFull to a dedicated
function.

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.196

This version brings along following fixes:

- Copy crc_skip_count when duplicating CRTC state
- Add debug option for idle optimizations on cursor updates
- Disable MPC split for DCN32/321
- Add missing ODM 2:1 policy logic
- Update DCN32 and DCN321 SR latencies
- Add reinstate dram in the FPO logic
- Add dc_ctx to link_enc_create() parameters
- Cache cursor when cursor exceeds 64x64
- Add support for manual DMUB FAMS trigger
- Fix dpstreamclk programming
- Add missing AUDIO_DTO_SEL reg field
- Add OTG/ODM functions
- Use correct clock source constructor for DCN314
- Use correct DTO_SRC_SEL for 128b/132b encoding
- Add pixel rate div calcs and programming
- Remove FPU flags from DCN30 Makefile
- Create patch bounding box function for isolate FPU
- Move mclk calculation function to DML
- Remove FPU operations from dcn201 resources
- Fallback to SW cursor if SubVP + cursor too big
- Drop unnecessary FPU flags on dcn302 files
- Reboot while unplug hdcp enabled dp from mst hub
- Reset pipe count when iterating for DET override
- Calculate MALL cache lines based on Mblks required
- Fix two MPO videos in single display ODM combine mode
- Guard against zero memory channels
- Updates SubVP + SubVP DRR cases updates
- Fix OPTC function pointers for DCN314
- Add enable/disable FIFO callbacks to stream setup
- Avoid MPC infinite loop

Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Copy crc_skip_count when duplicating CRTC state

[Why]

crc_skip_count is used to track how many frames to skip to allow the OTG
CRC engine to "warm up" before it outputs correct CRC values.
Experimentally, this seems to be 2 frames.

When duplicating CRTC states, this value was not copied to the
duplicated state. Therefore, when this state is committed, we will
needlessly wait 2 frames before outputing CRC values. Even if the CRC
engine is already warmed up.

[How]

Copy the crc_skip_count as part of dm_crtc_duplicate_state.

Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add debug option for idle optimizations on cursor updates

For optimizations and debug purposes we added an option to exit idle
operations on cursor updates.

Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Disable MPC split for DCN32/321

Due to CRB, no need to rely on MPC splitting to maximize use of DET
anymore.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add missing ODM 2:1 policy logic

Phantom pipes must use the same configuration used in main pipes. This
commit add this check.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update DCN32 and DCN321 SR latencies

Update worst case SR latencies according to values measured by hardware
team.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add reinstate dram in the FPO logic

In order to handle FPO correctly, we need to reinstate the dram values.
This function adds the required code to handle the vblank stretch and
the dram calculation.

Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add dc_ctx to link_enc_create() parameters

[Why&How]
Preparation to enable run time initialization of register offsets to add
dc_context to the link_enc_create callback. This is needed to get the
dc_ctx handle where register offset initialization routine is called.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Cache cursor when cursor exceeds 64x64

[Why]
When Static screen from MALL, the cursor needs to be
cached if cursor exceeds 64x64 size.

[How]
Program the bit that cache cursor in MALL when size
of the cursor exceeds 64x64.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add support for manual DMUB FAMS trigger

- Add is_drr parameter to indicate DRR is enabled on
the panel to determine whether SubVP MCLK switch
logic should be enabled

- Add DRR manual trigger in FW (instead of driver)
because manual trigger programming triggers DRR
update pending and can block SubVP MCLK switches
from taking place

Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix dpstreamclk programming

[WHY]
Currently programming incorrect hpo inst as well as selecting incorrect source

[HOW]
Use hpo inst instead of otg inst to select dpstreamclk inst

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add missing AUDIO_DTO_SEL reg field

[WHY]
Needed to program audio dto

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add OTG/ODM functions

[WHY]
Required for correct OTG_H_TIMING_CNTL programming

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use correct clock source constructor for DCN314

[WHY]
Previously was pointing to DCN3 clock constructor rather than DCN31's

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use correct DTO_SRC_SEL for 128b/132b encoding

[WHY]
DP DTO isn't used for 128b/132b encoding

[HOW]
Check current link rate to determine whether using 8b/10b or 128/132b encoding

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add pixel rate div calcs and programming

[WHY/HOW]
Need to calculate and set some pixel rate divisors on correct otg_inst

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove FPU flags from DCN30 Makefile

At this stage, we must have all the FPU code for DCN30 isolated in the
DML folder. Drop FPU flags from Makefile.

Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Create patch bounding box function for isolate FPU

In the DCN30 resource, we have a small patch to the bounding box struct;
this patch uses FPU operations. This commit moves that specific part to
its function under the DML folder.

Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move mclk calculation function to DML

The function responsible for calculating the MCLK switching has FPU
operations. This commit moves it to the dcn30_fpu file.

Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove FPU operations from dcn201 resources

We have some FPU operations on the resource part of the DCN201. This
commit drops FPU flags and moves any required FPU code to the DML
folder.

Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fallback to SW cursor if SubVP + cursor too big

[Description]
- For SubVP cursor cannot be cached in MALL, therefore
we will switch to SW cursor if the cursor size exceeds
what can fit in the local DCN buffers (64x64x4)
- Returning false / failure for set_cursor_attributes will
fallback to SW cursor

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Drop unnecessary FPU flags on dcn302 files

We already isolated the DCN302 code in the DML folder, but we forgot to
drop the FPU flags from the Makefile. This commit drops those flags.

Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reboot while unplug hdcp enabled dp from mst hub

[Why]
event_property_update does not check NULL pointer

[How]
check aconnector->base.state equals NULL

Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reset pipe count when iterating for DET override

[Why]
Coding error in DET allocation was resulting in too few DET segments
being allocated, causing underflow.

[How]
Reset pipe count each time we begin iterating through pipes for a stream.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Calculate MALL cache lines based on Mblks required

[Description]
- Calculation for NumWays in MALL should be based on
number of MBlks

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix two MPO videos in single display ODM combine mode

[Why]
In single display ODM combine mode, two MPO videos ( three
 planes ) are not working

[How]
When we detect three planes, don't set odm combine 2to1 policy
 for the MPO planes.  Otherwise, we run out of pipes available
Add support for two MPO videos in dc_add_plane_to_context().
 Don't allow both videos to be on the same side of the
 display.
Add extra check when fetching free pipe for two MPO videos.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Guard against zero memory channels

[Why]
If BIOS doesn't specify number of memory channels then bandwidth
validation will fail due to insufficient BW in DML.

[How]
If BIOS is setting zero channels then use the default in the table.
If no entry is in the table and no BIOS value is specified then
throw an ASSERT for future developers to look into.

Reviewed-by: Michael Strauss <Michael.Strauss@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Updates SubVP and SubVP DRR cases

[Description]
- For any DRR cases in SubVP, don't lock for VSYNC flips
- For DCN32/321 use FW to do DRR manual trigger programming
- Add bit in SubVP cmd to indicate if the SubVP pipe is DRR

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix OPTC function pointers for DCN314

[Why]
Access violation occurs when swapping between HDMI and FRL monitors
because we're missing the immediate_disable_crtc callback and it's
required for the DCN314 clk manager.

[How]
Update the table to match the DCN31 optc functions for ones that
should be the same:
- immediate_disable_crtc
- configure_crc

Reviewed-by: Michael Strauss <Michael.Strauss@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add enable/disable FIFO callbacks to stream setup

[Why]
We don't write out attributes after disabling and re-enabling the link
on some monitors, causing some, but not all, HDMI displays to fail to
lightup on DCN314.

[How]
Firmware used to do this after DIG link setup.

Since firmware is no longer doing this to support USB4 and dynamic link
remapping we'll need to add this to driver in the equivalent paths.

New optional callbacks were created in the stream encoder interface and
implementations were added for DCN314.

Reviewed-by: Michael Strauss <Michael.Strauss@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Avoid MPC infinite loop

[why]
In some cases MPC tree bottom pipe ends up point to itself.  This causes
iterating from top to bottom to hang the system in an infinite loop.

[how]
When looping to next MPC bottom pipe, check that the pointer is not same
as current to avoid infinite loop.

Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable swiotlb for gmc 11.0

Enable swiotlb for gmc 11.0.

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable swiotlb for gmc 10.0 (V2)

Enable swiotlb for gmc 10.0.
v2: include drm_cache.h to use the function ‘drm_need_swiotlb’

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Fix typo 'the the' in comment

Replace 'the the' with 'the' in the comment.

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: reduce stack for dml32_CalculatePrefetchSchedule

Move stack variables to dummy structure.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>

drm/amd/display: reduce stack for dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport

Move stack variables to dummy structure.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>