OSDN Git Service
Philippe Mathieu-Daudé [Tue, 29 Oct 2019 16:52:31 +0000 (17:52 +0100)]
tests/fw_cfg: Test 'reboot-timeout=-1' special value
The special value -1 means "don't reboot" for QEMU/libvirt.
Add a trivial test.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Dr. David Alan Gilbert [Fri, 25 Oct 2019 16:57:06 +0000 (17:57 +0100)]
fw_cfg: Allow reboot-timeout=-1 again
Commit
ee5d0f89de3e53cdb0dc added range checking on reboot-timeout
to only allow the range 0..65535; however both qemu and libvirt document
the special value -1 to mean don't reboot.
Allow it again.
Fixes:
ee5d0f89de3e53cdb0dc ("fw_cfg: Fix -boot reboot-timeout error checking")
RH bz: https://bugzilla.redhat.com/show_bug.cgi?id=
1765443
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <
20191025165706.177653-1-dgilbert@redhat.com>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <
37ac197c-f20e-dd05-ff6a-
13a2171c7148@redhat.com>
[PMD: Applied Laszlo's suggestions]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Thomas Huth [Fri, 18 Oct 2019 16:10:08 +0000 (18:10 +0200)]
iotests: Remove 130 from the "auto" group
Peter hit a "Could not open 'TEST_DIR/t.IMGFMT': Failed to get shared
'write' lock - Is another process using the image [TEST_DIR/t.IMGFMT]?"
error with 130 already twice. Looks like this test is a little bit
shaky, and currently nobody has a real clue what could be causing this
issue, so for the time being, let's disable it from the "auto" group so
that it does not gate the pull requests.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 31 Oct 2019 10:07:54 +0000 (10:07 +0000)]
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-next-311019-1' into staging
Fixes to get CI green again
- fix m68k acceptance tests (Cleber)
- stop build breakage (Daniel)
# gpg: Signature made Thu 31 Oct 2019 10:00:53 GMT
# gpg: using RSA key
6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-next-311019-1:
Acceptance test: update kernel for m68k/q800 test
Acceptance test: cancel test if m68k kernel packages goes missing
tests: fix conditional for disabling XTS test
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cleber Rosa [Tue, 29 Oct 2019 23:23:20 +0000 (19:23 -0400)]
Acceptance test: update kernel for m68k/q800 test
There's an updated version of the Debian package containing the m68k
Kernel.
Now, if the package gets updated again, the test won't fail, but will
be canceled. A more permanent solution is certainly needed.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20191029232320.12419-3-crosa@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cleber Rosa [Tue, 29 Oct 2019 23:23:19 +0000 (19:23 -0400)]
Acceptance test: cancel test if m68k kernel packages goes missing
The Linux kernel that is extracted from a Debian package for the q800
machine test is hosted on a "pool" location. AFAICT, it gets updated
without too much ceremony, and I don't see any archival location that
is stable enough.
For now, to avoid test errors, let's cancel the test if fetching the
package fails.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20191029232320.12419-2-crosa@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Daniel P. Berrangé [Wed, 30 Oct 2019 15:17:40 +0000 (15:17 +0000)]
tests: fix conditional for disabling XTS test
The intent is to only enable the XTS test if both CONFIG_BLOCK
and CONFIG_QEMU_PRIVATE_XTS are set to 'y'.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20191030151740.14326-1-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Peter Maydell [Thu, 31 Oct 2019 08:12:40 +0000 (08:12 +0000)]
Merge remote-tracking branch 'remotes/rth/tags/pull-sfp-
20191030' into staging
Use hardfloat for float32_to_float64
# gpg: Signature made Wed 30 Oct 2019 18:06:19 GMT
# gpg: using RSA key
7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-sfp-
20191030:
softfp: Added hardfloat conversion from float32 to float64
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Matus Kysel [Thu, 17 Oct 2019 14:21:33 +0000 (16:21 +0200)]
softfp: Added hardfloat conversion from float32 to float64
Reintroduce float32_to_float64 that was removed here:
https://lists.gnu.org/archive/html/qemu-devel/2018-04/msg00455.html
- nbench test it not actually calling this function at all
- SPECS 2006 significat number of tests impoved their runtime, just
few of them showed small slowdown
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matus Kysel <mkysel@tachyum.com>
Message-Id: <
20191017142133.59439-1-mkysel@tachyum.com>
[rth: Add comment about impossible inexact exceptions.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Wed, 30 Oct 2019 14:10:32 +0000 (14:10 +0000)]
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tcg-plugins-281019-4' into staging
TCG Plugins initial implementation
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
# gpg: Signature made Mon 28 Oct 2019 15:13:23 GMT
# gpg: using RSA key
6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tcg-plugins-281019-4: (57 commits)
travis.yml: enable linux-gcc-debug-tcg cache
MAINTAINERS: add me for the TCG plugins code
scripts/checkpatch.pl: don't complain about (foo, /* empty */)
.travis.yml: add --enable-plugins tests
include/exec: wrap cpu_ldst.h in CONFIG_TCG
accel/stubs: reduce headers from tcg-stub
tests/plugin: add hotpages to analyse memory access patterns
tests/plugin: add instruction execution breakdown
tests/plugin: add a hotblocks plugin
tests/tcg: enable plugin testing
tests/tcg: drop test-i386-fprem from TESTS when not SLOW
tests/tcg: move "virtual" tests to EXTRA_TESTS
tests/tcg: set QEMU_OPTS for all cris runs
tests/tcg/Makefile.target: fix path to config-host.mak
tests/plugin: add sample plugins
linux-user: support -plugin option
vl: support -plugin option
plugin: add qemu_plugin_outs helper
plugin: add qemu_plugin_insn_disas helper
plugin: expand the plugin_init function to include an info block
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Wed, 30 Oct 2019 11:13:16 +0000 (11:13 +0000)]
Merge remote-tracking branch 'remotes/cleber/tags/python-next-pull-request' into staging
Python (acceptance tests) queue, 2019-10-28
# gpg: Signature made Mon 28 Oct 2019 23:43:11 GMT
# gpg: using RSA key
7ABB96EB8B46B94D5E0FE9BB657E8D33A5F209F3
# gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3
* remotes/cleber/tags/python-next-pull-request:
tests/boot_linux_console: Run BusyBox on 5KEc 64-bit cpu
tests/boot_linux_console: Add initrd test for the Exynos4210
tests/boot_linux_console: Add a test for the Raspberry Pi 2
tests/boot_linux_console: Use Avocado archive::gzip_uncompress()
.travis.yml: Let the avocado job run the 40p tests
tests/acceptance: Test OpenBIOS on the PReP/40p
tests/acceptance: Add test that runs NetBSD 4.0 installer on PRep/40p
.travis.yml: Let the avocado job run the Leon3 test
tests/acceptance: Add test that boots the HelenOS microkernel on Leon3
tests/acceptance: Refactor exec_command_and_wait_for_pattern()
tests/acceptance: Send <carriage return> on serial lines
tests/acceptance: Fix wait_for_console_pattern() hangs
Acceptance tests: refactor wait_for_console_pattern
Python libs: close console sockets before shutting down the VMs
Acceptance tests: work around socket dir
MAINTAINERS: update location of Python libraries
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Wed, 30 Oct 2019 11:11:00 +0000 (11:11 +0000)]
Merge remote-tracking branch 'remotes/stsquad/tags/pull-gitdm-next-271019-1' into staging
gitdm updates
- Add a few individuals
- Add China Mobile
# gpg: Signature made Sun 27 Oct 2019 19:21:15 GMT
# gpg: using RSA key
6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-gitdm-next-271019-1:
contrib/gitdm: add China Mobile to the domain map
contrib/gitdm: add Andrey to the individual group
contrib/gitdm: add Emanuele as an individual
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Wed, 30 Oct 2019 06:15:44 +0000 (06:15 +0000)]
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio: features, cleanups
virtio net failover
rcu cleanup
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 29 Oct 2019 22:58:14 GMT
# gpg: using RSA key
281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
virtio: Use auto rcu_read macros
virtio_net: use RCU_READ_LOCK_GUARD
virtio/vhost: Use auto_rcu_read macros
vfio: unplug failover primary device before migration
net/virtio: add failover support
libqos: tolerate wait-unplug migration state
migration: add new migration state wait-unplug
migration: allow unplug during migration for failover devices
qapi: add failover negotiated event
qapi: add unplug primary event
pci: mark device having guest unplug request pending
pci: mark devices partially unplugged
pci: add option for net failover
qdev/qbus: add hidden device support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Dr. David Alan Gilbert [Mon, 28 Oct 2019 16:11:09 +0000 (16:11 +0000)]
virtio: Use auto rcu_read macros
Use RCU_READ_LOCK_GUARD and WITH_RCU_READ_LOCK_GUARD
to replace the manual rcu_read_(un)lock calls.
I think the only change is virtio_load which was missing unlocks
in error paths; those end up being fatal errors so it's not
that important anyway.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <
20191028161109.60205-1-dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Dr. David Alan Gilbert [Fri, 25 Oct 2019 10:34:03 +0000 (11:34 +0100)]
virtio_net: use RCU_READ_LOCK_GUARD
Use RCU_READ_LOCK_GUARD rather than the manual rcu_read_(un)lock call.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <
20191025103403.120616-3-dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Dr. David Alan Gilbert [Fri, 25 Oct 2019 10:34:02 +0000 (11:34 +0100)]
virtio/vhost: Use auto_rcu_read macros
Use RCU_READ_LOCK_GUARD instead of manual rcu_read_(un)lock
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <
20191025103403.120616-2-dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jens Freimann [Tue, 29 Oct 2019 11:49:05 +0000 (12:49 +0100)]
vfio: unplug failover primary device before migration
As usual block all vfio-pci devices from being migrated, but make an
exception for failover primary devices. This is achieved by setting
unmigratable to 0 but also add a migration blocker for all vfio-pci
devices except failover primary devices. These will be unplugged before
migration happens by the migration handler of the corresponding
virtio-net standby device.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <
20191029114905.6856-12-jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jens Freimann [Tue, 29 Oct 2019 11:49:04 +0000 (12:49 +0100)]
net/virtio: add failover support
This patch adds support to handle failover device pairs of a virtio-net
device and a (vfio-)pci device, where the virtio-net acts as the standby
device and the (vfio-)pci device as the primary.
The general idea is that we have a pair of devices, a (vfio-)pci and a
emulated (virtio-net) device. Before migration the vfio device is
unplugged and data flows to the emulated device, on the target side
another (vfio-)pci device is plugged in to take over the data-path. In the
guest the net_failover module will pair net devices with the same MAC
address.
To achieve this we need:
1. Provide a callback function for the should_be_hidden DeviceListener.
It is called when the primary device is plugged in. Evaluate the QOpt
passed in to check if it is the matching primary device. It returns
if the device should be hidden or not.
When it should be hidden it stores the device options in the VirtioNet
struct and the device is added once the VIRTIO_NET_F_STANDBY feature is
negotiated during virtio feature negotiation.
If the virtio-net devices are not realized at the time the (vfio-)pci
devices are realized, we need to connect the devices later. This way
we make sure primary and standby devices can be specified in any
order.
2. Register a callback for migration status notifier. When called it
will unplug its primary device before the migration happens.
3. Register a callback for the migration code that checks if a device
needs to be unplugged from the guest.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Message-Id: <
20191029114905.6856-11-jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jens Freimann [Tue, 29 Oct 2019 11:49:03 +0000 (12:49 +0100)]
libqos: tolerate wait-unplug migration state
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Message-Id: <
20191029114905.6856-10-jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jens Freimann [Tue, 29 Oct 2019 11:49:02 +0000 (12:49 +0100)]
migration: add new migration state wait-unplug
This patch adds a new migration state called wait-unplug. It is entered
after the SETUP state if failover devices are present. It will transition
into ACTIVE once all devices were succesfully unplugged from the guest.
So if a guest doesn't respond or takes long to honor the unplug request
the user will see the migration state 'wait-unplug'.
In the migration thread we query failover devices if they're are still
pending the guest unplug. When all are unplugged the migration
continues. If one device won't unplug migration will stay in wait_unplug
state.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <
20191029114905.6856-9-jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jens Freimann [Tue, 29 Oct 2019 11:49:01 +0000 (12:49 +0100)]
migration: allow unplug during migration for failover devices
In "
b06424de62 migration: Disable hotplug/unplug during migration" we
added a check to disable unplug for all devices until we have figured
out what works. For failover primary devices qdev_unplug() is called
from the migration handler, i.e. during migration.
This patch adds a flag to DeviceState which is set to false for all
devices and makes an exception for PCI devices that are also
primary devices in a failover pair.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Message-Id: <
20191029114905.6856-8-jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jens Freimann [Tue, 29 Oct 2019 11:49:00 +0000 (12:49 +0100)]
qapi: add failover negotiated event
This event is sent to let libvirt know that VIRTIO_NET_F_STANDBY feature
is enabled. The primary device this virtio-net (standby) device is
associated with, is now hotplugged by the virtio-net device.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Message-Id: <
20191029114905.6856-7-jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Jens Freimann [Tue, 29 Oct 2019 11:48:59 +0000 (12:48 +0100)]
qapi: add unplug primary event
This event is emitted when we sent a request to unplug a
failover primary device from the Guest OS and it includes the
device id of the primary device.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Message-Id: <
20191029114905.6856-6-jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Jens Freimann [Tue, 29 Oct 2019 11:48:58 +0000 (12:48 +0100)]
pci: mark device having guest unplug request pending
Set pending_deleted_event in DeviceState for failover
primary devices that were successfully unplugged by the Guest OS.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Message-Id: <
20191029114905.6856-5-jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jens Freimann [Tue, 29 Oct 2019 11:48:57 +0000 (12:48 +0100)]
pci: mark devices partially unplugged
Only the guest unplug request was triggered. This is needed for
the failover feature. In case of a failed migration we need to
plug the device back to the guest.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Message-Id: <
20191029114905.6856-4-jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jens Freimann [Tue, 29 Oct 2019 11:48:56 +0000 (12:48 +0100)]
pci: add option for net failover
This patch adds a failover_pair_id property to PCIDev which is
used to link the primary device in a failover pair (the PCI dev) to
a standby (a virtio-net-pci) device.
It only supports ethernet devices. Also currently it only supports
PCIe devices. The requirement for PCIe is because it doesn't support
other hotplug controllers at the moment. The failover functionality can
be added to other hotplug controllers like ACPI, SHCP,... later on.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Message-Id: <
20191029114905.6856-3-jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jens Freimann [Tue, 29 Oct 2019 11:48:55 +0000 (12:48 +0100)]
qdev/qbus: add hidden device support
This adds support for hiding a device to the qbus and qdev APIs. The
first user of this will be the virtio-net failover feature but the API
introduced with this patch could be used to implement other features as
well, for example hiding pci devices when a pci bus is powered off.
qdev_device_add() is modified to check for a failover_pair_id
argument in the option string. A DeviceListener callback
should_be_hidden() is added. It can be used by a standby device to
inform qdev that this device should not be added now. The standby device
handler can store the device options to plug the device in at a later
point in time.
One reason for hiding the device is that we don't want to expose both
devices to the guest kernel until the respective virtio feature bit
VIRTIO_NET_F_STANDBY was negotiated and we know that the devices will be
handled correctly by the guest.
More information on the kernel feature this is using:
https://www.kernel.org/doc/html/latest/networking/net_failover.html
An example where the primary device is a vfio-pci device and the standby
device is a virtio-net device:
A device is hidden when it has an "failover_pair_id" option, e.g.
-device virtio-net-pci,...,failover=on,...
-device vfio-pci,...,failover_pair_id=net1,...
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Message-Id: <
20191029114905.6856-2-jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Maydell [Tue, 29 Oct 2019 20:06:08 +0000 (20:06 +0000)]
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2019-10-29' into staging
QAPI patches for 2019-10-29
# gpg: Signature made Tue 29 Oct 2019 06:40:56 GMT
# gpg: using RSA key
354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2019-10-29:
qapi: Check feature documentation against the schema
qapi: Polish reporting of bogus member documentation
qapi: Lift features into QAPISchemaEntity
qapi: Fold normalize_enum() into check_enum()
qapi: Fold normalize_features() into check_features()
qapi: Fold normalize_if() into check_if()
qapi: Eliminate .check_doc() overrides
qapi: Simplify ._make_implicit_object_type()
qapi: Fix doc comment checking for commands and events
qapi: Clean up doc comment checking for implicit union base
qapi: Fix enum doc comment checking
qapi: Split .connect_doc(), .check_doc() off .check()
qapi: De-duplicate entity documentation generation code
qapi: Implement boxed event argument documentation
qemu-doc: Belatedly document QMP command deprecation
tests/qapi-schema: Fix feature documentation testing
tests/qapi-schema: Cover alternate documentation comments
tests/qapi-schema: Demonstrate command and event doc comment bugs
tests/qapi-schema: Demonstrate feature and enum doc comment bugs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 29 Oct 2019 18:46:52 +0000 (18:46 +0000)]
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Tue 29 Oct 2019 02:33:36 GMT
# gpg: using RSA key
EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
COLO-compare: Fix incorrect `if` logic
virtio-net: prevent offloads reset on migration
virtio: new post_load hook
net: add tulip (
dec21143) driver
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 29 Oct 2019 18:07:10 +0000 (18:07 +0000)]
Merge remote-tracking branch 'remotes/mcayland/tags/qemu-openbios-
20191028' into staging
qemu-openbios queue
# gpg: Signature made Mon 28 Oct 2019 19:03:44 GMT
# gpg: using RSA key
CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* remotes/mcayland/tags/qemu-openbios-
20191028:
Update OpenBIOS images to
7e5b89e4 built from submodule.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 29 Oct 2019 16:27:48 +0000 (16:27 +0000)]
Merge remote-tracking branch 'remotes/vivier/tags/q800-branch-pull-request' into staging
Add Macintosh Quadra 800 machine in hw/m68k
# gpg: Signature made Mon 28 Oct 2019 18:14:25 GMT
# gpg: using RSA key
CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier/tags/q800-branch-pull-request:
BootLinuxConsoleTest: Test the Quadra 800
hw/m68k: define Macintosh Quadra 800
hw/m68k: add a dummy SWIM floppy controller
hw/m68k: add Nubus macfb video card
hw/m68k: add Nubus support
hw/m68k: implement ADB bus support for via
hw/m68k: add VIA support
dp8393x: manage big endian bus
esp: add pseudo-DMA as used by Macintosh
esp: move get_cmd() post-DMA code to get_cmd_cb()
esp: move handle_ti_cmd() cleanup code to esp_do_dma().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 29 Oct 2019 15:33:15 +0000 (15:33 +0000)]
Merge remote-tracking branch 'remotes/berrange/tags/crypto-luks-pull-request' into staging
crypto: improve performance of ciphers in XTS mode
Currently QEMU uses its own XTS cipher mode, however, this has
relatively poor performance.
Gcrypt now includes its own XTS cipher which is at least x2 faster than
what we get with QEMU's on Fedora/RHEL hosts. With gcrypt git master, a
further x5-6 speed up is seen.
This is essential for QEMU's LUKS performance to be viable.
# gpg: Signature made Mon 28 Oct 2019 15:48:38 GMT
# gpg: using RSA key
DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/crypto-luks-pull-request:
crypto: add support for nettle's native XTS impl
crypto: add support for gcrypt's native XTS impl
tests: benchmark crypto with fixed data size, not time period
tests: allow filtering crypto cipher benchmark tests
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 29 Oct 2019 08:38:04 +0000 (08:38 +0000)]
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-
20191028' into staging
Improvements for TARGET_PAGE_BITS_VARY
Fix for TCI ld16u_i64.
Fix for segv on icount execute from i/o memory.
Two misc cleanups.
# gpg: Signature made Mon 28 Oct 2019 14:55:08 GMT
# gpg: using RSA key
7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tcg-
20191028:
translate-all: Remove tb_alloc
translate-all: fix uninitialized tb->orig_tb
cputlb: Fix tlb_vaddr_to_host
exec: Cache TARGET_PAGE_MASK for TARGET_PAGE_BITS_VARY
exec: Promote TARGET_PAGE_MASK to target_long
exec: Restrict TARGET_PAGE_BITS_VARY assert to CONFIG_DEBUG_TCG
exec: Use const alias for TARGET_PAGE_BITS_VARY
configure: Detect compiler support for __attribute__((alias))
exec: Split out variable page size support to exec-vary.c
cpu: use ROUND_UP() to define xxx_PAGE_ALIGN
cputlb: ensure _cmmu helper functions follow the naming standard
tci: Add implementation for INDEX_op_ld16u_i64
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Markus Armbruster [Thu, 24 Oct 2019 11:02:37 +0000 (13:02 +0200)]
qapi: Check feature documentation against the schema
Commit
f3ed93d545 "qapi: Allow documentation for features" neglected
to check documentation against the schema. Fix that: check them the
same way we check arguments.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20191024110237.30963-20-armbru@redhat.com>
Markus Armbruster [Thu, 24 Oct 2019 11:02:36 +0000 (13:02 +0200)]
qapi: Polish reporting of bogus member documentation
Improve error messages from
the following documented members are not in the declaration: a
the following documented members are not in the declaration: aa, bb
to the more concise
documented member 'a' does not exist
documented members 'aa', 'bb' do not exist
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20191024110237.30963-19-armbru@redhat.com>
Markus Armbruster [Thu, 24 Oct 2019 11:02:35 +0000 (13:02 +0200)]
qapi: Lift features into QAPISchemaEntity
Commit
6a8c0b5102 "qapi: Add feature flags to struct types" added
features to QAPISchemaObjectType. Commit
a95daa5093 "qapi: Add
feature flags to commands in qapi" added them to QAPISchemaCommand,
duplicating the code. Tolerable, but the duplication will only get
worse as we add features to more definitions.
To de-duplicate, lift features from QAPISchemaObjectType and
QAPISchemaCommand into QAPISchemaEntity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20191024110237.30963-18-armbru@redhat.com>
Markus Armbruster [Thu, 24 Oct 2019 11:02:34 +0000 (13:02 +0200)]
qapi: Fold normalize_enum() into check_enum()
check_features() is always called together with normalize_features().
Fold the latter into the former.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20191024110237.30963-17-armbru@redhat.com>
Markus Armbruster [Thu, 24 Oct 2019 11:02:33 +0000 (13:02 +0200)]
qapi: Fold normalize_features() into check_features()
check_features() is always called together with normalize_features():
the former in check_struct() and check_command(), the latter in their
caller check_exprs(). Fold the latter into the former.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20191024110237.30963-16-armbru@redhat.com>
Markus Armbruster [Thu, 24 Oct 2019 11:02:32 +0000 (13:02 +0200)]
qapi: Fold normalize_if() into check_if()
check_if() is always called together with normalize_if(). Fold the
latter into the former.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20191024110237.30963-15-armbru@redhat.com>
Markus Armbruster [Thu, 24 Oct 2019 11:02:31 +0000 (13:02 +0200)]
qapi: Eliminate .check_doc() overrides
All sub-classes of QAPISchemaEntity now override .check_doc() the same
way, except for QAPISchemaType and and QAPISchemaArrayType.
Put the overrides' code in QAPISchemaEntity.check_doc(), and drop the
overrides. QAPISchemaType doesn't care because it's abstract.
QAPISchemaArrayType doesn't care because its .doc is always None.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20191024110237.30963-14-armbru@redhat.com>
Markus Armbruster [Thu, 24 Oct 2019 11:02:30 +0000 (13:02 +0200)]
qapi: Simplify ._make_implicit_object_type()
All callers now pass doc=None. Drop the argument.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20191024110237.30963-13-armbru@redhat.com>
Markus Armbruster [Thu, 24 Oct 2019 11:02:29 +0000 (13:02 +0200)]
qapi: Fix doc comment checking for commands and events
When a command's 'data' is an object, its doc comment describes the
arguments defined there. When 'data' names a type, the doc comment
does not describe arguments. Instead, the doc generator inserts a
pointer to the named type.
An event's doc comment works the same.
We don't actually check doc comments for commands and events.
Instead, QAPISchema._def_command() forwards the doc comment to the
implicit argument type, where it gets checked. Works because the
check only cares for the implicit argument type's members.
Not only is this needlessly hard to understand, it actually falls
apart in two cases:
* When 'data' is empty, there is nothing to forward to, and the doc
comment remains unchecked. Demonstrated by test doc-bad-event-arg.
* When 'data' names a type, we can't forward, as the type has its own
doc comment. The command or event's doc comment remains unchecked.
Demonstrated by test doc-bad-boxed-command-arg.
The forwarding goes back to commit
069fb5b250 "qapi: Prepare for
requiring more complete documentation", put to use in commit
816a57cd6e "qapi: Fix detection of bogus member documentation". That
fix was incomplete.
To fix this, make QAPISchemaCommand and QAPISchemaEvent check doc
comments, and drop the forwarding of doc comments to implicit argument
types.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20191024110237.30963-12-armbru@redhat.com>
Markus Armbruster [Thu, 24 Oct 2019 11:02:28 +0000 (13:02 +0200)]
qapi: Clean up doc comment checking for implicit union base
An object type's doc comment describes the type's members, less the
ones defined in a named base type. Cases:
* Struct: the members are defined in 'data' and inherited from 'base'.
Since the base type cannot be implicit, the doc comment describes
just 'data'.
* Simple union: the only member is the implicit tag member @type, and
the doc comment describes it.
* Flat union with implicit base type: the members are defined in
'base', and the doc comment describes it.
* Flat union with named base type: the members are inherited from
'base'. The doc comment describes no members.
Before we can check a doc comment with .check_doc(), we need
.connect_doc() connect each of its "argument sections" to the member
it documents.
For structs and simple unions, this is straightforward: the members in
question are in .local_members, and .connect_doc() connects them.
For flat unions with a named base type, it's trivial: .local_members
is empty, and .connect_doc() does nothing.
For flat unions with an implicit base type, it's tricky. We have
QAPISchema._make_implicit_object_type() forward the union's doc
comment to the implicit base type, so that the base type's
.connect_doc() connects the members. The union's .connect_doc() does
nothing, as .local_members is empty.
Dirt effect: we check the doc comment twice, once for the union type,
and once for the implicit base type.
This is needlessly brittle and hard to understand. Clean up as
follows. Make the union's .connect_doc() connect an implicit base's
members itself. Do not forward the union's doc comment to its
implicit base type.
Requires extending .connect_doc() so it can work with a doc comment
other than self.doc. Add an optional argument for that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20191024110237.30963-11-armbru@redhat.com>
Markus Armbruster [Thu, 24 Oct 2019 11:02:27 +0000 (13:02 +0200)]
qapi: Fix enum doc comment checking
Enumeration type documentation comments are not checked, as
demonstrated by test doc-bad-enum-member. This is because we neglect
to call self.doc.check() for enumeration types. Messed up in
816a57cd6e "qapi: Fix detection of bogus member documentation". Fix
it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20191024110237.30963-10-armbru@redhat.com>
Markus Armbruster [Thu, 24 Oct 2019 11:02:26 +0000 (13:02 +0200)]
qapi: Split .connect_doc(), .check_doc() off .check()
Splitting documentation checking off the .check() methods makes them a
bit more focused, which is welcome, as some of them are pretty big.
It also prepares the ground for the following commits.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20191024110237.30963-9-armbru@redhat.com>
Markus Armbruster [Thu, 24 Oct 2019 11:02:25 +0000 (13:02 +0200)]
qapi: De-duplicate entity documentation generation code
QAPISchemaGenDocVisitor.visit_command() duplicates texi_entity() for
its boxed arguments case. The previous commit added another copy in
.visit_event().
Replace texi_entity() by texi_type() and texi_msg(). Use texi_msg()
for the boxed arguments case as well.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20191024110237.30963-8-armbru@redhat.com>
Markus Armbruster [Thu, 24 Oct 2019 11:02:24 +0000 (13:02 +0200)]
qapi: Implement boxed event argument documentation
Generate a reference "Arguments: the members of ...", just like we do
for commands since commit
c2dd311cb7 "qapi2texi: Implement boxed
argument documentation".
No change to generated QMP documentation; we don't yet use boxed
events outside tests/.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20191024110237.30963-7-armbru@redhat.com>
Markus Armbruster [Thu, 24 Oct 2019 11:02:23 +0000 (13:02 +0200)]
qemu-doc: Belatedly document QMP command deprecation
Commit
24fb413300 "qmp: Introduce blockdev-change-medium" (v2.5.0)
deprecated change.
Commit
2ff3025797 "migrate: move max-bandwidth and downtime-limit to
migrate_set_parameter" (v2.8.0) deprecated migrate_set_downtime and
migrate_set_speed.
These wre missed in commit
eb22aeca65 "docs: document deprecation
policy & deprecated features in appendix" (v2.10.0).
Commit
73af8dd8d7 "migration: Make xbzrle_cache_size a migration
parameter" (v2.11.0) deprecated migrate-set-cache-size and
query-migrate-cache-size, but neglected to update qemu-doc.
Make up for that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20191024110237.30963-6-armbru@redhat.com>
Markus Armbruster [Thu, 24 Oct 2019 11:02:22 +0000 (13:02 +0200)]
tests/qapi-schema: Fix feature documentation testing
Commit
8aa3a33e44 "tests/qapi-schema: Test for good feature lists in
structs" made test-qapi.py show features, but neglected to show their
documentation. Fix that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20191024110237.30963-5-armbru@redhat.com>
Markus Armbruster [Thu, 24 Oct 2019 11:02:21 +0000 (13:02 +0200)]
tests/qapi-schema: Cover alternate documentation comments
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20191024110237.30963-4-armbru@redhat.com>
Markus Armbruster [Thu, 24 Oct 2019 11:02:20 +0000 (13:02 +0200)]
tests/qapi-schema: Demonstrate command and event doc comment bugs
Add negative tests doc-bad-boxed-command-arg and doc-bad-event-arg to
cover boxed and no arguments. They demonstrate insufficient doc
comment checking.
Update positive test doc-good to cover boxed event arguments. It
demonstrates the generated doc comment misses arguments.
These bugs will be fixed later in this series.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20191024110237.30963-3-armbru@redhat.com>
Markus Armbruster [Thu, 24 Oct 2019 11:02:19 +0000 (13:02 +0200)]
tests/qapi-schema: Demonstrate feature and enum doc comment bugs
Add negative tests doc-bad-enum-member and doc-bad-feature to cover
documentation for nonexistent enum members and features, and test
doc-undoc-feature to cover features lacking documentation. None of
them works. To be fixed later in this series.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20191024110237.30963-2-armbru@redhat.com>
Fan Yang [Tue, 24 Sep 2019 14:08:29 +0000 (22:08 +0800)]
COLO-compare: Fix incorrect `if` logic
'colo_mark_tcp_pkt' should return 'true' when packets are the same, and
'false' otherwise. However, it returns 'true' when
'colo_compare_packet_payload' returns non-zero while
'colo_compare_packet_payload' is just a 'memcmp'. The result is that
COLO-compare reports inconsistent TCP packets when they are actually
the same.
Fixes:
f449c9e549c ("colo: compare the packet based on the tcp sequence number")
Cc: qemu-stable@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Fan Yang <Fan_Yang@sjtu.edu.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Mikhail Sennikovsky [Fri, 11 Oct 2019 13:58:04 +0000 (15:58 +0200)]
virtio-net: prevent offloads reset on migration
Currently offloads disabled by guest via the VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET
command are not preserved on VM migration.
Instead all offloads reported by guest features (via VIRTIO_PCI_GUEST_FEATURES)
get enabled.
What happens is: first the VirtIONet::curr_guest_offloads gets restored and offloads
are getting set correctly:
#0 qemu_set_offload (nc=0x555556a11400, csum=1, tso4=0, tso6=0, ecn=0, ufo=0) at net/net.c:474
#1 virtio_net_apply_guest_offloads (n=0x555557701ca0) at hw/net/virtio-net.c:720
#2 virtio_net_post_load_device (opaque=0x555557701ca0, version_id=11) at hw/net/virtio-net.c:2334
#3 vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577c80 <vmstate_virtio_net_device>, opaque=0x555557701ca0, version_id=11)
at migration/vmstate.c:168
#4 virtio_load (vdev=0x555557701ca0, f=0x5555569dc010, version_id=11) at hw/virtio/virtio.c:2197
#5 virtio_device_get (f=0x5555569dc010, opaque=0x555557701ca0, size=0, field=0x55555668cd00 <__compound_literal.5>) at hw/virtio/virtio.c:2036
#6 vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577ce0 <vmstate_virtio_net>, opaque=0x555557701ca0, version_id=11) at migration/vmstate.c:143
#7 vmstate_load (f=0x5555569dc010, se=0x5555578189e0) at migration/savevm.c:829
#8 qemu_loadvm_section_start_full (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2211
#9 qemu_loadvm_state_main (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2395
#10 qemu_loadvm_state (f=0x5555569dc010) at migration/savevm.c:2467
#11 process_incoming_migration_co (opaque=0x0) at migration/migration.c:449
However later on the features are getting restored, and offloads get reset to
everything supported by features:
#0 qemu_set_offload (nc=0x555556a11400, csum=1, tso4=1, tso6=1, ecn=0, ufo=0) at net/net.c:474
#1 virtio_net_apply_guest_offloads (n=0x555557701ca0) at hw/net/virtio-net.c:720
#2 virtio_net_set_features (vdev=0x555557701ca0, features=
5104441767) at hw/net/virtio-net.c:773
#3 virtio_set_features_nocheck (vdev=0x555557701ca0, val=
5104441767) at hw/virtio/virtio.c:2052
#4 virtio_load (vdev=0x555557701ca0, f=0x5555569dc010, version_id=11) at hw/virtio/virtio.c:2220
#5 virtio_device_get (f=0x5555569dc010, opaque=0x555557701ca0, size=0, field=0x55555668cd00 <__compound_literal.5>) at hw/virtio/virtio.c:2036
#6 vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577ce0 <vmstate_virtio_net>, opaque=0x555557701ca0, version_id=11) at migration/vmstate.c:143
#7 vmstate_load (f=0x5555569dc010, se=0x5555578189e0) at migration/savevm.c:829
#8 qemu_loadvm_section_start_full (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2211
#9 qemu_loadvm_state_main (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2395
#10 qemu_loadvm_state (f=0x5555569dc010) at migration/savevm.c:2467
#11 process_incoming_migration_co (opaque=0x0) at migration/migration.c:449
Fix this by preserving the state in saved_guest_offloads field and
pushing out offload initialization to the new post load hook.
Cc: qemu-stable@nongnu.org
Signed-off-by: Mikhail Sennikovsky <mikhail.sennikovskii@cloud.ionos.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Michael S. Tsirkin [Fri, 11 Oct 2019 13:58:03 +0000 (15:58 +0200)]
virtio: new post_load hook
Post load hook in virtio vmsd is called early while device is processed,
and when VirtIODevice core isn't fully initialized. Most device
specific code isn't ready to deal with a device in such state, and
behaves weirdly.
Add a new post_load hook in a device class instead. Devices should use
this unless they specifically want to verify the migration stream as
it's processed, e.g. for bounds checking.
Cc: qemu-stable@nongnu.org
Suggested-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mikhail Sennikovsky <mikhail.sennikovskii@cloud.ionos.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Sven Schnelle [Wed, 23 Oct 2019 08:42:44 +0000 (10:42 +0200)]
net: add tulip (
dec21143) driver
This adds the basic functionality to emulate a Tulip NIC.
Implemented are:
- RX and TX functionality
- Perfect Frame Filtering
- Big/Little Endian descriptor support
- 93C46 EEPROM support
- LXT970 PHY
Not implemented, mostly because i had no OS using these functions:
- Imperfect frame filtering
- General Purpose Timer
- Transmit automatic polling
- Boot ROM support
- SIA interface
- Big/Little Endian data buffer conversion
Successfully tested with the following Operating Systems:
- MSDOS with Microsoft Network Client 3.0 and DEC ODI drivers
- HPPA Linux
- Windows XP
- HP-UX
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <
20191022155413.4619-1-svens@stackframe.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Philippe Mathieu-Daudé [Mon, 28 Oct 2019 23:04:04 +0000 (19:04 -0400)]
tests/boot_linux_console: Run BusyBox on 5KEc 64-bit cpu
This tests boots a Linux kernel on a Malta machine up to a
busybox shell on the serial console. Few commands are executed
before halting the machine (via reboot).
We use the Fedora 24 kernel extracted from the image at:
https://fedoraproject.org/wiki/Architectures/MIPS
and the initrd cpio image from the kerneltests project:
https://kerneltests.org/
If MIPS is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:mips" tags.
Alternatively, this test can be run using:
$ AVOCADO_ALLOW_UNTRUSTED_CODE=yes \
avocado --show=console run -t arch:mips64el \
tests/acceptance/boot_linux_console.py
console: [ 0.000000] Linux version 3.19.3.mtoman.
20150408 (mtoman@debian-co3-1) (gcc version 5.0.0
20150316 (Red Hat 5.0.0-0.20) (GCC) ) #3 Wed Apr 8 14:32:50 UTC 2015
console: [ 0.000000] Early serial console at I/O port 0x3f8 (options '38400n8')
console: [ 0.000000] bootconsole [uart0] enabled
console: [ 0.000000] CPU0 revision is:
00018900 (MIPS 5KE)
console: [ 0.000000] Checking for the multiply/shift bug... no.
console: [ 0.000000] Checking for the daddiu bug... no.
[...]
console: Boot successful.
console: cat /proc/cpuinfo
console: / # cat /proc/cpuinfo
console: system type : MIPS Malta
console: machine : Unknown
console: processor : 0
console: cpu model : MIPS 5KE V0.0
console: : 1616.89
console: wait instruction : nouname -a
console: microsecond timers : yes
console: tlb_entries : 32
console: extra interrupt vector : yes
console: hardware watchpoint : yes, count: 1, address/irw mask: [0x0ff8]
console: isa : mips1 mips2 mips3 mips4 mips5 mips32r1 mips32r2 mips64r1 mips64r2
console: ASEs implemented :
console: shadow register sets : 1
console: kscratch registers : 0
console: package : 0
console: core : 0
console: VCED exceptions : not available
console: VCEI exceptions : not available
console: / #
console: / # uname -a
console: Linux buildroot 3.19.3.mtoman.
20150408 #3 Wed Apr 8 14:32:50 UTC 2015 mips64 GNU/Linux
console: reboot
console: / #
console: / # reboot
console: / #
console: / # reboot: Restarting system
PASS (7.04 s)
JOB TIME : 7.20 s
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20191028073441.6448-27-philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Philippe Mathieu-Daudé [Mon, 28 Oct 2019 23:04:04 +0000 (19:04 -0400)]
tests/boot_linux_console: Add initrd test for the Exynos4210
This test boots a Linux kernel on a smdkc210 board and verify
the serial output is working.
The cpio image used comes from the linux-build-test project:
https://github.com/groeck/linux-build-test
If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.
This test can be run using:
$ IGNORE_AVOCADO_CONSOLE_BUG=yes \
avocado --show=app,console run -t machine:smdkc210 \
tests/acceptance/boot_linux_console.py
console: Booting Linux on physical CPU 0x900
console: Linux version 4.19.0-6-armmp (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u1 (2019-09-20)
console: CPU: ARMv7 Processor [
410fc090] revision 0 (ARMv7), cr=
10c5387d
console: CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
console: OF: fdt: Machine model: Samsung smdkv310 evaluation board based on Exynos4210
[...]
console: Samsung CPU ID: 0x43210211
console: random: get_random_bytes called from start_kernel+0xa0/0x504 with crng_init=0
console: percpu: Embedded 17 pages/cpu s39756 r8192 d21684 u69632
console: Built 1 zonelists, mobility grouping on. Total pages: 249152
console: Kernel command line: printk.time=0 console=ttySAC0,115200n8 earlyprintk random.trust_cpu=off cryptomgr.notests cpuidle.off=1 panic=-1 noreboot
[...]
console: L2C: platform modifies aux control register: 0x02020000 -> 0x3e420001
console: L2C: platform provided aux values permit register corruption.
console: L2C: DT/platform modifies aux control register: 0x02020000 -> 0x3e420001
console: L2C-310 erratum 769419 enabled
console: L2C-310 enabling early BRESP for Cortex-A9
console: L2C-310: enabling full line of zeros but not enabled in Cortex-A9
console: L2C-310 ID prefetch enabled, offset 1 lines
console: L2C-310 dynamic clock gating disabled, standby mode disabled
console: L2C-310 cache controller enabled, 8 ways, 128 kB
console: L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e420001
console: Exynos4210 clocks: sclk_apll =
12000000, sclk_mpll =
12000000
console: sclk_epll =
12000000, sclk_vpll =
12000000, arm_clk =
12000000
[...]
console: s3c-i2c
13860000.i2c: slave address 0x00
console: s3c-i2c
13860000.i2c: bus frequency set to 93 KHz
console: s3c-i2c
13860000.i2c: i2c-0: S3C I2C adapter
[...]
console: dma-pl330
12680000.pdma: Loaded driver for PL330 DMAC-241330
console: dma-pl330
12680000.pdma: DBUFF-256x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
console: dma-pl330
12690000.pdma: Loaded driver for PL330 DMAC-241330
console: dma-pl330
12690000.pdma: DBUFF-256x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
console: dma-pl330
12850000.mdma: Loaded driver for PL330 DMAC-241330
console: dma-pl330
12850000.mdma: DBUFF-256x8bytes Num_Chans-8 Num_Peri-1 Num_Events-16
console: dma-pl330
12850000.mdma: PM domain LCD0 will not be powered off
console: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console: Serial: AMBA driver
console:
13800000.serial: ttySAC0 at MMIO 0x13800000 (irq = 40, base_baud = 0) is a S3C6400/10
console: console [ttySAC0] enabled
console:
13810000.serial: ttySAC1 at MMIO 0x13810000 (irq = 41, base_baud = 0) is a S3C6400/10
console:
13820000.serial: ttySAC2 at MMIO 0x13820000 (irq = 42, base_baud = 0) is a S3C6400/10
console:
13830000.serial: ttySAC3 at MMIO 0x13830000 (irq = 43, base_baud = 0) is a S3C6400/10
[...]
console: Freeing unused kernel memory: 2048K
console: Run /init as init process
console: mount: mounting devtmpfs on /dev failed: Device or resource busy
console: Starting logging: OK
console: Initializing random number generator... random: dd: uninitialized urandom read (512 bytes read)
console: done.
console: Starting network: OK
console: Found console ttySAC0
console: Linux version 4.19.0-6-armmp (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u1 (2019-09-20)
console: Boot successful.
PASS (37.98 s)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20191028073441.6448-25-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
[Cleber: removed conditional to skip test]
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Philippe Mathieu-Daudé [Mon, 28 Oct 2019 23:04:04 +0000 (19:04 -0400)]
tests/boot_linux_console: Add a test for the Raspberry Pi 2
Similar to the x86_64/pc test, it boots a Linux kernel on a raspi2
board and verify the serial is working.
The kernel image and DeviceTree blob are built by the Raspbian
project (based on Debian):
https://www.raspbian.org/RaspbianImages
as recommended by the Raspberry Pi project:
https://www.raspberrypi.org/downloads/raspbian/
If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.
Alternatively, this test can be run using:
$ avocado run -t arch:arm tests/acceptance
$ avocado run -t machine:raspi2 tests/acceptance
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20191028073441.6448-21-philmd@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Philippe Mathieu-Daudé [Mon, 28 Oct 2019 23:04:04 +0000 (19:04 -0400)]
tests/boot_linux_console: Use Avocado archive::gzip_uncompress()
Avocado 67.0 [*] introduced the avocado.utils.archive module which
provides handling of gzip files. Use the gzip_uncompress() method.
[*] https://avocado-framework.readthedocs.io/en/67.0/api/utils/avocado.utils.html#avocado.utils.archive.gzip_uncompress
Suggested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20191028073441.6448-20-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Philippe Mathieu-Daudé [Mon, 28 Oct 2019 23:04:04 +0000 (19:04 -0400)]
.travis.yml: Let the avocado job run the 40p tests
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20191028073441.6448-18-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Philippe Mathieu-Daudé [Mon, 28 Oct 2019 23:04:04 +0000 (19:04 -0400)]
tests/acceptance: Test OpenBIOS on the PReP/40p
User case from:
https://mail.coreboot.org/pipermail/openbios/2018-May/010360.html
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20191028073441.6448-16-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
[Cleber: added skip conditional for Travis]
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Philippe Mathieu-Daudé [Mon, 28 Oct 2019 23:04:04 +0000 (19:04 -0400)]
tests/acceptance: Add test that runs NetBSD 4.0 installer on PRep/40p
As of this commit, NetBSD 4.0 is very old. However it is enough to
test the PRep/40p machine.
User case from:
http://mail-index.netbsd.org/port-prep/2017/04/11/msg000112.html
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20191028073441.6448-14-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
[Cleber: fixed file name and imports]
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Philippe Mathieu-Daudé [Mon, 28 Oct 2019 23:04:04 +0000 (19:04 -0400)]
.travis.yml: Let the avocado job run the Leon3 test
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20191028073441.6448-13-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Philippe Mathieu-Daudé [Mon, 28 Oct 2019 23:04:04 +0000 (19:04 -0400)]
tests/acceptance: Add test that boots the HelenOS microkernel on Leon3
Release notes:
http://www.helenos.org/wiki/Download#HelenOS0.6.0
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20191028073441.6448-11-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
[Cleber: added/removed needed/unneeded imports]
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Philippe Mathieu-Daudé [Mon, 28 Oct 2019 23:04:04 +0000 (19:04 -0400)]
tests/acceptance: Refactor exec_command_and_wait_for_pattern()
Refactor the exec_command_and_wait_for_pattern() utility method
so we can reuse it in other files.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20191028073441.6448-6-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Philippe Mathieu-Daudé [Mon, 28 Oct 2019 23:04:04 +0000 (19:04 -0400)]
tests/acceptance: Send <carriage return> on serial lines
Some firmwares don't parse the <Newline> control character and
expect a <carriage return>.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20191028073441.6448-5-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Philippe Mathieu-Daudé [Mon, 28 Oct 2019 23:04:04 +0000 (19:04 -0400)]
tests/acceptance: Fix wait_for_console_pattern() hangs
Because of a possible deadlock (QEMU waiting for the socket to
become writable) let's close the console socket as soon as we
stop to use it.
Suggested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20191028073441.6448-4-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
[Cleber: corrected small typo in commit message]
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Cleber Rosa [Mon, 28 Oct 2019 23:04:04 +0000 (19:04 -0400)]
Acceptance tests: refactor wait_for_console_pattern
The same utility method is already present in two different test
files, so let's consolidate it into a single utility function.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <
20190916164011.7653-1-crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: failure_message is optional]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <
20191028073441.6448-3-philmd@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Cleber Rosa [Mon, 28 Oct 2019 23:04:04 +0000 (19:04 -0400)]
Python libs: close console sockets before shutting down the VMs
Currently, the console socket on QEMUMachine is closed after the QMP
command to gracefully exit QEMU is executed. Because of a possible
deadlock (QEMU waiting for the socket to become writable) let's close
the console socket earlier.
Reference: <
20190607034214.GB22416@habkost.net>
Reference: https://bugs.launchpad.net/qemu/+bug/
1829779
From: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <
20190911023558.4880-2-crosa@redhat.com>
Cleber Rosa [Mon, 28 Oct 2019 23:04:04 +0000 (19:04 -0400)]
Acceptance tests: work around socket dir
Change
32558ce7a4 introduced specific directories for the socket dir
when using python/qemu/machine.py:QEMUMachine. iotests probably
didn't catch the condition that two simultaneous QEMUMachine
instances, without manually set temporary or socket dirs would clash.
Having two QEMUMachine instances is a condition expected for many
acceptance tests, and it's already used by the migration tests.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Cleber Rosa [Mon, 28 Oct 2019 23:04:04 +0000 (19:04 -0400)]
MAINTAINERS: update location of Python libraries
Commit
8f8fd9ed introduced the python directory structure, but forgot
to update the path pattern on the MAINTAINERS file.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Peter Maydell [Mon, 28 Oct 2019 21:43:06 +0000 (21:43 +0000)]
Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.2-sf2' into staging
RISC-V Patches for the 4.2 Soft Freeze, Part 2
This patch set contains a handful of small fixes for RISC-V targets that
I'd like to target for the 4.2 soft freeze. They include:
* A fix to allow the debugger to access the state of all privilege
modes, as opposed to just the currently executing one.
* A pair of cleanups to implement cpu_do_transaction_failed.
* Fixes to the device tree.
* The addition of various memory regions to make the sifive_u machine
more closely match the HiFive Unleashed board.
* Fixes to our GDB interface to allow CSRs to be accessed.
* A fix to a memory leak pointed out by coverity.
* A fix that prevents PMP checks from firing incorrectly.
This passes "make chcek" and boots Open Embedded for me.
# gpg: Signature made Mon 28 Oct 2019 15:47:52 GMT
# gpg: using RSA key
00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
* remotes/palmer/tags/riscv-for-master-4.2-sf2:
target/riscv: PMP violation due to wrong size parameter
riscv/boot: Fix possible memory leak
target/riscv: Make the priv register writable by GDB
target/riscv: Expose "priv" register for GDB for reads
target/riscv: Tell gdbstub the correct number of CSRs
riscv/virt: Jump to pflash if specified
riscv/virt: Add the PFlash CFI01 device
riscv/virt: Manually define the machine
riscv/sifive_u: Add the start-in-flash property
riscv/sifive_u: Manually define the machine
riscv/sifive_u: Add QSPI memory region
riscv/sifive_u: Add L2-LIM cache memory
linux-user/riscv: Propagate fault address
riscv: sifive_u: Add ethernet0 to the aliases node
riscv: hw: Drop "clock-frequency" property of cpu nodes
RISC-V: Implement cpu_do_transaction_failed
RISC-V: Handle bus errors in the page table walker
riscv: Skip checking CSR privilege level in debugger mode
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Sat, 26 Oct 2019 16:45:46 +0000 (18:45 +0200)]
BootLinuxConsoleTest: Test the Quadra 800
This test boots a Linux kernel on a Quadra 800 board
and verify the serial is working.
Example:
$ avocado --show=app,console run -t machine:q800 tests/acceptance/boot_linux_console.py
console: ABCFGHIJK
console: Linux version 5.2.0-2-m68k (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-21)) #1 Debian 5.2.9-2 (2019-08-21)
console: Detected Macintosh model: 35
console: Apple Macintosh Quadra 800
console: Built 1 zonelists, mobility grouping on. Total pages: 32448
console: Kernel command line: printk.time=0 console=ttyS0 vga=off
[...]
console: Calibrating delay loop... 1236.99 BogoMIPS (lpj=
6184960)
[...]
console: NuBus: Scanning NuBus slots.
console: Slot 9: Board resource not found!
console: SCSI subsystem initialized
console: clocksource: Switched to clocksource via1
[...]
console: macfb: framebuffer at 0xf9001000, mapped to 0x(ptrval), size 468k
console: macfb: mode is 800x600x8, linelength=800
console: Console: switching to colour frame buffer device 100x37
console: fb0: DAFB frame buffer device
console: pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
console: scc.0: ttyS0 at MMIO 0x50f0c022 (irq = 4, base_baud = 230400) is a Z85c30 ESCC - Serial port
console: scc.1: ttyS1 at MMIO 0x50f0c020 (irq = 4, base_baud = 230400) is a Z85c30 ESCC - Serial port
console: Non-volatile memory driver v1.3
console: adb: Mac II ADB Driver v1.0 for Unified ADB
console: mousedev: PS/2 mouse device common for all mice
console: random: fast init done
console: Detected ADB keyboard, type <unknown>.
console: input: ADB keyboard as /devices/virtual/input/input0
console: input: ADB mouse as /devices/virtual/input/input1
console: rtc-generic rtc-generic: registered as rtc0
console: ledtrig-cpu: registered to indicate activity on CPUs
[...]
console: rtc-generic rtc-generic: setting system clock to 2019-09-10T16:20:25 UTC (
1568132425)
console: List of all partitions:
console: No filesystem could mount root, tried:
JOB TIME : 2.91 s
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <
20190910163430.11326-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <
20191026164546.30020-12-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Laurent Vivier [Sat, 26 Oct 2019 16:45:45 +0000 (18:45 +0200)]
hw/m68k: define Macintosh Quadra 800
If you want to test the machine, it doesn't yet boot a MacROM, but you can
boot a linux kernel from the command line.
You can install your own disk using debian-installer with:
./qemu-system-m68k \
-M q800 \
-serial none -serial mon:stdio \
-m 1000M -drive file=m68k.qcow2,format=qcow2 \
-net nic,model=dp83932,addr=09:00:07:12:34:57 \
-append "console=ttyS0 vga=off" \
-kernel vmlinux-4.15.0-2-m68k \
-initrd initrd.gz \
-drive file=debian-9.0-m68k-NETINST-1.iso \
-drive file=m68k.qcow2,format=qcow2 \
-nographic
If you use a graphic adapter instead of "-nographic", you can use "-g"
to set the size of the display (I use "-g 1600x800x24").
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <
20191026164546.30020-11-laurent@vivier.eu>
Laurent Vivier [Sat, 26 Oct 2019 16:45:44 +0000 (18:45 +0200)]
hw/m68k: add a dummy SWIM floppy controller
SWIM (Sander-Wozniak Integrated Machine) is the floppy controller of
the 680x0 Macintosh.
This patch introduces only the basic support: it allows to switch from
IWM (Integrated WOZ Machine) mode to the SWIM mode and makes the linux
driver happy.
It cannot read any floppy image.
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <
20191026164546.30020-10-laurent@vivier.eu>
Laurent Vivier [Sat, 26 Oct 2019 16:45:43 +0000 (18:45 +0200)]
hw/m68k: add Nubus macfb video card
This patch adds support for a graphic framebuffer device.
This device can be added as a sysbus device or as a NuBus device.
It is accessed as a framebuffer but the color palette can be set.
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <
20191026164546.30020-9-laurent@vivier.eu>
Laurent Vivier [Sat, 26 Oct 2019 16:45:42 +0000 (18:45 +0200)]
hw/m68k: add Nubus support
This patch adds basic support for the NuBus bus. This is used by 680x0
Macintosh.
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <
20191026164546.30020-8-laurent@vivier.eu>
Laurent Vivier [Sat, 26 Oct 2019 16:45:41 +0000 (18:45 +0200)]
hw/m68k: implement ADB bus support for via
VIA needs to be able to poll the ADB interface and to read/write data
from/to the bus.
This patch adds functions allowing that.
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <
20191026164546.30020-7-laurent@vivier.eu>
Laurent Vivier [Sat, 26 Oct 2019 16:45:40 +0000 (18:45 +0200)]
hw/m68k: add VIA support
Inside the 680x0 Macintosh, VIA (Versatile Interface Adapter) is used
to interface the keyboard, Mouse, and real-time clock. It also provides
control line for the floppy disk driver, video interface, sound circuitry
and serial interface.
This implementation is based on the MOS6522 object.
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <
20191026164546.30020-6-laurent@vivier.eu>
Laurent Vivier [Sat, 26 Oct 2019 16:45:39 +0000 (18:45 +0200)]
dp8393x: manage big endian bus
This is needed by Quadra 800, this card can run on little-endian
or big-endian bus.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <
20191026164546.30020-5-laurent@vivier.eu>
Laurent Vivier [Sat, 26 Oct 2019 16:45:38 +0000 (18:45 +0200)]
esp: add pseudo-DMA as used by Macintosh
There is no DMA in Quadra 800, so the CPU reads/writes the data from the
PDMA register (offset 0x100, ESP_PDMA in hw/m68k/q800.c) and copies them
to/from the memory.
There is a nice assembly loop in the kernel to do that, see
linux/drivers/scsi/mac_esp.c:MAC_ESP_PDMA_LOOP().
The start of the transfer is triggered by the DREQ interrupt (see linux
mac_esp_send_pdma_cmd()), the CPU polls on the IRQ flag to start the
transfer after a SCSI command has been sent (in Quadra 800 it goes
through the VIA2, the via2-irq line and the vIFR register)
The Macintosh hardware includes hardware handshaking to prevent the CPU
from reading invalid data or writing data faster than the peripheral
device can accept it.
This is the "blind mode", and from the doc:
"Approximate maximum SCSI transfer rates within a blocks are 1.4 MB per
second for blind transfers in the Macintosh II"
Some references can be found in:
Apple Macintosh Family Hardware Reference, ISBN 0-201-19255-1
Guide to the Macintosh Family Hardware, ISBN-0-201-52405-8
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20191026164546.30020-4-laurent@vivier.eu>
Laurent Vivier [Sat, 26 Oct 2019 16:45:37 +0000 (18:45 +0200)]
esp: move get_cmd() post-DMA code to get_cmd_cb()
This will be needed to implement pseudo-DMA
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20191026164546.30020-3-laurent@vivier.eu>
Laurent Vivier [Sat, 26 Oct 2019 16:45:36 +0000 (18:45 +0200)]
esp: move handle_ti_cmd() cleanup code to esp_do_dma().
To prepare following patches move do_cmd and DMA special case
from handle_ti() to esp_do_dma().
This part of the code must be only executed with real DMA, not with
pseudo-DMA. And PDMA is detected in esp_do_dma(), so move this part
of the code in esp_do_dma(). We keep the code in handle_ti_cmd()
in the case no DMA is done.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20191026164546.30020-2-laurent@vivier.eu>
Mark Cave-Ayland [Mon, 28 Oct 2019 17:11:04 +0000 (17:11 +0000)]
Update OpenBIOS images to
7e5b89e4 built from submodule.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Dayeol Lee [Tue, 22 Oct 2019 21:21:29 +0000 (21:21 +0000)]
target/riscv: PMP violation due to wrong size parameter
riscv_cpu_tlb_fill() uses the `size` parameter to check PMP violation
using pmp_hart_has_privs().
However, if the size is unknown (=0), the ending address will be
`addr - 1` as it is `addr + size - 1` in `pmp_hart_has_privs()`.
This always causes a false PMP violation on the starting address of the
range, as `addr - 1` is not in the range.
In order to fix, we just assume that all bytes from addr to the end of
the page will be accessed if the size is unknown.
Signed-off-by: Dayeol Lee <dayeol@berkeley.edu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Alistair Francis [Thu, 3 Oct 2019 16:59:29 +0000 (09:59 -0700)]
riscv/boot: Fix possible memory leak
Coverity (CID
1405786) thinks that there is a possible memory leak as
we don't guarantee that the memory allocated from riscv_find_firmware()
is freed. This is a false positive, but let's tidy up the code to fix
the warning.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Daniel P. Berrangé [Mon, 14 Oct 2019 16:28:27 +0000 (17:28 +0100)]
crypto: add support for nettle's native XTS impl
Nettle 3.5.0 will add support for the XTS mode. Use this because long
term we wish to delete QEMU's XTS impl to avoid carrying private crypto
algorithm impls.
Unfortunately this degrades nettle performance from 612 MB/s to 568 MB/s
as nettle's XTS impl isn't so well optimized yet.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Daniel P. Berrangé [Mon, 14 Oct 2019 16:28:27 +0000 (17:28 +0100)]
crypto: add support for gcrypt's native XTS impl
Libgcrypt 1.8.0 added support for the XTS mode. Use this because long
term we wish to delete QEMU's XTS impl to avoid carrying private crypto
algorithm impls.
As an added benefit, using this improves performance from 531 MB/sec to
670 MB/sec, since we are avoiding several layers of function call
indirection.
This is even more noticable with the gcrypt builds in Fedora or RHEL-8
which have a non-upstream patch for FIPS mode which does mutex locking.
This is catastrophic for encryption performance with small block sizes,
meaning this patch improves encryption from 240 MB/sec to 670 MB/sec.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Alex Bennée [Thu, 24 Oct 2019 16:02:09 +0000 (17:02 +0100)]
travis.yml: enable linux-gcc-debug-tcg cache
Create a new cache for the --enable-debug-tcg builds which is separate
from the normal debug builds which generate different code. We also
enable debug-tcg for the new plugins based builds as we want to ensure
any breakage to TCG is picked up by the sanity checks.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée [Thu, 17 Oct 2019 13:25:23 +0000 (14:25 +0100)]
MAINTAINERS: add me for the TCG plugins code
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Alex Bennée [Thu, 17 Oct 2019 11:58:17 +0000 (12:58 +0100)]
scripts/checkpatch.pl: don't complain about (foo, /* empty */)
It's quite common to have a mini comment inside braces to acknowledge
we know it's empty. Expand the inline detection to allow closing
braces before the end of line.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Alex Bennée [Fri, 11 Oct 2019 15:41:16 +0000 (16:41 +0100)]
.travis.yml: add --enable-plugins tests
check-tcg will automatically run the plugins against most TCG tests if
it is enabled in the build. We exclude sparc64-linux-user for now as
there are pending patches that need to be merged fixing it's fork
implementation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Alex Bennée [Fri, 17 May 2019 11:36:10 +0000 (12:36 +0100)]
include/exec: wrap cpu_ldst.h in CONFIG_TCG
This gets around a build problem with --disable-tcg.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Alex Bennée [Fri, 17 May 2019 11:35:03 +0000 (12:35 +0100)]
accel/stubs: reduce headers from tcg-stub
We don't need much for these. However I do wonder why these aren't
just null inlines in exec-all.h
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Alex Bennée [Tue, 11 Jun 2019 12:29:55 +0000 (13:29 +0100)]
tests/plugin: add hotpages to analyse memory access patterns
This plugin gives a summary of access patterns grouped by "pages" and
showing read/write patterns by vCPUS.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Alex Bennée [Tue, 21 May 2019 09:15:53 +0000 (10:15 +0100)]
tests/plugin: add instruction execution breakdown
This gives a break down of instruction classes and individual
instruction types.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Alex Bennée [Mon, 20 May 2019 15:14:44 +0000 (16:14 +0100)]
tests/plugin: add a hotblocks plugin
This is a simple plugin to track which translation blocks are call
most often. As we don't have a view of the internals of TCG we can
only work by the address of the start of the block so we also need to
tracks how often the address is translated.
As there will be multiple blocks starting at the same address. We can
try and work around this by futzing the value to feed to the hash with
the insn count.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Alex Bennée [Fri, 17 May 2019 16:09:48 +0000 (17:09 +0100)]
tests/tcg: enable plugin testing
If CONFIG_PLUGINS is enabled then lets enable testing for all our TCG
targets. This is a simple smoke test that ensure we don't crash or
otherwise barf out by running each plugin against each test.
There is a minor knock on effect for additional runners which need
specialised QEMU_OPTS which will also need to declare a plugin version
of the runner. If this gets onerous we might need to add another
helper.
Checking the results of the plugins is left for a later exercise.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Alex Bennée [Fri, 11 Oct 2019 12:07:22 +0000 (13:07 +0100)]
tests/tcg: drop test-i386-fprem from TESTS when not SLOW
This is a very slow running test which we only enable explicitly.
However having it in the TESTS lists would confuse additional tests
like the plugins test which want to run on all currently enabled
tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>