OSDN Git Service
Eric Anholt [Wed, 18 Aug 2010 00:50:05 +0000 (17:50 -0700)]
glcpp: Add testcase for #if handling bug that breaks Savage2.
Dave Airlie [Wed, 18 Aug 2010 00:50:19 +0000 (10:50 +1000)]
r600g: fix height calcs for miptree
h needs to be rounded up, this probably needs revisiting when we get
to tiling etc.
fixes fbo-generatemipmap-npot
Dave Airlie [Tue, 17 Aug 2010 23:56:21 +0000 (09:56 +1000)]
r600g: emit texture level offset in CB/DB setup.
8 more piglit tests pass,
fbo-clearmipmap, fbo-copyteximage, fbo-generatemipmap,
fbo-generatemipmap-nonsquare, fbo-generatemipmap-scissor,
fbo-generatemipmap-viewport, gen-teximage, gen-texsubimage
Eric Anholt [Wed, 18 Aug 2010 00:24:42 +0000 (17:24 -0700)]
ir_to_mesa: Fix implementation of ir_binop_equal, ir_binop_notequal.
These binops are the vector-to-bool comparisons, not vec-to-bvec. We
likely want both operations avilable as expression, since 915 and 965
FS naturally does the vector version, while 965 VS can also naturally
do the scalar version. However, we can save that until later.
Fixes:
glsl-fs-vec4-operator-equal.shader_test
glsl-fs-vec4-operator-notequal.shader_test
glsl-vs-vec4-operator-equal.shader_test
glsl-vs-vec4-operator-notequal.shader_test
Eric Anholt [Tue, 17 Aug 2010 23:12:15 +0000 (16:12 -0700)]
i915: Add support for SSG opcode.
Fixes glsl-fs-sign and many of the tests of trig builtins.
Eric Anholt [Tue, 17 Aug 2010 22:51:34 +0000 (15:51 -0700)]
i915: Add support for reading output regs in the FS.
Fixes glsl-unused-varying and many others, since we produce an output
reg read any time gl_FragColor is written inside an if statement.
Eric Anholt [Tue, 17 Aug 2010 22:42:40 +0000 (15:42 -0700)]
i915: Add support for OPCODE_DP2.
Fixes glsl-fs-dot-vec2.
Eric Anholt [Tue, 17 Aug 2010 22:07:22 +0000 (15:07 -0700)]
i915: Enable ARB_fragment_shader by default.
Now that we have glsl2 with if flattening in place, most shaders will
just work. Remaining failing shaders will mostly be due to loop
unrolling (in progress), some possible if flattening failures in
inlining functions (planning on fixing), and the register/instruction
count limits.
While the GLSL and GLSL-ES specs say that shaders shouldn't fail to
compile/link due to register/instruction limits, in practice we're not
the first vendor to expose GLSL on hardware with these limitations.
The benefit to application developers of providing a better language
for GPU programming is greater than the pain of having to handle
instruction limits (which they had to for ARB_fp on this hardware
anyway)
Ian Romanick [Tue, 17 Aug 2010 22:57:48 +0000 (15:57 -0700)]
glsl2: Fix transpose of rows and cols
This error led to an assertion failure for some constructors of
non-square matrices. It only occured in matrices where the number of
columns was greater than the number of rows. It didn't even always
occur on those.
Fixes piglit glslparsertest case constructor-16.vert.
Henri Verbeet [Tue, 17 Aug 2010 22:25:32 +0000 (18:25 -0400)]
r600c: Handle reads from PROGRAM_OUTPUT
with glsl2, reads from outputs are legal
Ian Romanick [Tue, 17 Aug 2010 21:55:50 +0000 (14:55 -0700)]
linker: Demote user-defined varyings in the VS-only case
Fixes piglit test case glsl-vs-ff-frag and bugzilla #29623.
Benjamin Segovia [Tue, 17 Aug 2010 03:40:09 +0000 (20:40 -0700)]
prog_optimize: Only merge writes to temporary registers
In one optimization pass, register files may have been messed therefore
merging instructions which use the same index in two different register
files.
Jerome Glisse [Tue, 17 Aug 2010 21:23:20 +0000 (17:23 -0400)]
r600g: fix fake pixel output
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Eric Anholt [Tue, 17 Aug 2010 20:59:08 +0000 (13:59 -0700)]
i965: Add support for DP2 in the VS.
Fixes glsl-vs-dot-vec2.
Eric Anholt [Tue, 17 Aug 2010 20:24:50 +0000 (13:24 -0700)]
glsl: When doing algebraic simplification, make sure the type still matches.
When simplifying (vec4(1.0) / (float(x))) to rcp(float(x)), we forgot
to produce a vec4, angering ir_validate when starting alien-arena.
Fixes:
glsl-algebraic-add-zero-2
glsl-algebraic-div-one-2
glsl-algebraic-mul-one-2
glsl-algebraic-sub-zero-3
glsl-algebraic-rcp-sqrt-2
Eric Anholt [Tue, 17 Aug 2010 20:27:44 +0000 (13:27 -0700)]
glsl: Make ir_algebraic new expressions allocate out of the parent.
This could reduce the amount of memory used by a shader tree after
optimization, and increases consistency with other passes.
Ian Romanick [Tue, 17 Aug 2010 19:57:28 +0000 (12:57 -0700)]
ir_constant: Don't assert on out-of-bounds array accesses
Several optimization paths, including constant folding, can lead to
accessing an ir_constant array with an out of bounds index. The GLSL
spec lets us produce "undefined" results, but it does not let us
crash.
Fixes piglit test case glsl-array-bounds-01 and glsl-array-bounds-03.
Eric Anholt [Tue, 17 Aug 2010 19:37:49 +0000 (12:37 -0700)]
mesa: Dump shader source before validating the shader.
This will make extracting source to produce minimal testcases for
shader compile issues easier.
Alex Deucher [Tue, 17 Aug 2010 14:42:06 +0000 (10:42 -0400)]
r600c: fix dword miscount in blit emit code
Chia-I Wu [Tue, 17 Aug 2010 11:24:18 +0000 (19:24 +0800)]
targets/egl: Link with DRI_LIB_DEPS.
Use DRI_LIB_DEPS when linking GL/GLES state trackers. This fixes
missing talloc symbol errors, and is hopefully more future proof.
nobled [Mon, 16 Aug 2010 16:46:14 +0000 (16:46 +0000)]
gallivm: Fix and re-enable MMX-disabling code
Signed-off-by: José Fonseca <jfonseca@vmware.com>
Dave Airlie [Tue, 17 Aug 2010 10:54:45 +0000 (20:54 +1000)]
mesa: fix es1/2 build hopefully
needed to add cpp rules and includes properly for es1/es2
Dave Airlie [Tue, 17 Aug 2010 09:01:18 +0000 (19:01 +1000)]
r300g: fix context destroy under hyperz
we were destroying the mm before unrefing all the objects, so segfault.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Vinson Lee [Tue, 17 Aug 2010 07:20:58 +0000 (00:20 -0700)]
scons: Add -fno-common for 64-bit builds on Mac OS X.
This option is also needed for 64-bit builds if llvm is enabled.
Other the build fails during linking.
Dave Airlie [Tue, 17 Aug 2010 05:16:53 +0000 (15:16 +1000)]
r600g: kill event type magic number in winsys
these events have names, use them.
Vinson Lee [Tue, 17 Aug 2010 05:41:44 +0000 (22:41 -0700)]
configs: Add -ltalloc to linux-dri.
Fixes build after glsl2 branch merge, which added talloc dependency.
Dave Airlie [Tue, 17 Aug 2010 03:40:15 +0000 (13:40 +1000)]
r600g: add user clip plane support.
Apart from the fact that the radeon.h/r600_states.h editing is a nightmare, this
wasn't so bad.
passes piglit user-clip test now also trivial tests.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Eric Anholt [Tue, 17 Aug 2010 02:18:11 +0000 (19:18 -0700)]
i965: Use the implied move available in most brw_wm_emit brw_math() calls.
This saves an extra message reg move in the program, though I'm not
clear on whether it will have any performance impact other than cache
footprint. It will also fix those math calls on Sandybridge, where
the brw_eu_emit.c brw_math() support relies on the implied move being
used.
Eric Anholt [Fri, 9 Jul 2010 00:05:42 +0000 (17:05 -0700)]
i965: Add disasm for Compr4 instruction compression.
Ian Romanick [Tue, 17 Aug 2010 02:08:53 +0000 (19:08 -0700)]
Merge branch 'glsl2'
Conflicts:
src/mesa/program/prog_optimize.c
Vinson Lee [Tue, 17 Aug 2010 01:52:37 +0000 (18:52 -0700)]
util: Remove check_os_katmai_support.
check_os_katmai_support checks that the operating system running on a
SSE-capable processor supports SSE. This is necessary for unpatched
2.2.x and earlier kernels. 2.4.x and later kernels support SSE.
check_os_katmai_support will disable SSE capabilities for 32-bit x86
operating systems for which there is no code path. Currently, this
function handles Linux, Windows, and several BSDs. Mac OS, Cygwin, and
Solaris are several operating systems with no code paths.
Rather than add code for the unhandled operating systems, remove this
function altogether. This will fix SSE detection on all recent 32-bit
x86 operating systems. This completely breaks functionality on unpatched
2.2.x and earlier kernels, although there are likely no Gallium3D users
on such operating systems.
Dave Airlie [Fri, 13 Aug 2010 03:54:25 +0000 (13:54 +1000)]
r600g: drop libdrm_radeon link
Kenneth Graunke [Mon, 16 Aug 2010 22:18:23 +0000 (15:18 -0700)]
glsl2: Refresh autogenerated file builtin_function.cpp.
Kenneth Graunke [Mon, 16 Aug 2010 22:14:04 +0000 (15:14 -0700)]
glsl2: Add builtins profile for GLSL 1.30.
Many functions are currently wrapped with #if 0 since we haven't
implemented them yet.
Ian Romanick [Mon, 16 Aug 2010 20:59:34 +0000 (13:59 -0700)]
linker: Include compiler.h to avoid spurious warnings about INLINE
Ian Romanick [Mon, 16 Aug 2010 20:59:01 +0000 (13:59 -0700)]
glsl2: Silence unused variable warning
Vinson Lee [Mon, 16 Aug 2010 20:52:57 +0000 (13:52 -0700)]
translate: Move loop variable declaration outside for loop.
Fixes MSVC build.
Kenneth Graunke [Mon, 16 Aug 2010 20:43:10 +0000 (13:43 -0700)]
glcpp: Refresh autogenerated lexer and parser.
Kenneth Graunke [Mon, 16 Aug 2010 20:42:04 +0000 (13:42 -0700)]
glcpp: Remove spurious newline generated by #version handling.
This was causing line numbering to be off by one. The newline comes
from the NEWLINE token at the end of the line; there's no need to
insert one.
Marek Olšák [Mon, 16 Aug 2010 17:17:02 +0000 (19:17 +0200)]
r300g: fix assert in the rasterizer block for r3xx-r4xx
Reported-by: Niels Ole Salscheider <niels_ole@salscheider-online.de>
Ian Romanick [Mon, 16 Aug 2010 16:45:01 +0000 (09:45 -0700)]
ir_to_mesa: Silence unused variable warnings
Ian Romanick [Mon, 16 Aug 2010 16:43:00 +0000 (09:43 -0700)]
ir_to_mesa: Clean up assertions in ir_to_mesa_visitor::visit(ir_texture *)
Ian Romanick [Mon, 16 Aug 2010 16:39:58 +0000 (09:39 -0700)]
ir_to_mesa: Support texture rectangle targets
José Fonseca [Mon, 16 Aug 2010 16:20:54 +0000 (17:20 +0100)]
translate: Remove unused temporary register.
Assuming the side-effect of x86_make_reg is also unnecessary.
José Fonseca [Mon, 16 Aug 2010 16:18:14 +0000 (17:18 +0100)]
translate: Eliminate void pointer arithmetic.
Non-portable.
Chia-I Wu [Sun, 15 Aug 2010 09:24:14 +0000 (17:24 +0800)]
st/egl: Add support for EGL_KHR_fence_sync.
The extension is implemented by pipe_fence_handle.
Chia-I Wu [Sun, 15 Aug 2010 09:09:48 +0000 (17:09 +0800)]
egl: Add support for EGL_KHR_fence_sync.
Individual drivers still need to support and enable the extension.
Chia-I Wu [Sat, 14 Aug 2010 15:56:46 +0000 (23:56 +0800)]
st/egl: Add support for EGL_KHR_reusable_sync.
The extension is implemented by pipe_condvar.
Chia-I Wu [Sat, 14 Aug 2010 15:09:12 +0000 (23:09 +0800)]
egl: Add support for EGL_KHR_reusable_sync.
Individual drivers still need to support and enable the extension.
Chia-I Wu [Sun, 15 Aug 2010 16:18:30 +0000 (00:18 +0800)]
egl: Update eglext.h.
Update to version 7 for EGL_KHR_fence_sync.
Alex Deucher [Mon, 16 Aug 2010 15:34:17 +0000 (11:34 -0400)]
r600c: blit emit updates
- set VGT_MAX_VTX_INDX to a larger value
- emit PA_SC_AA_CONFIG. The command checker in 2.6.36+
requires this reg.
Luca Barbieri [Sun, 15 Aug 2010 05:37:31 +0000 (07:37 +0200)]
draw_llvm: fix segfaults on non-SSE2 CPUs where it is disabled (v2)
Changes in v2:
- Change function name
Currently draw_llvm refuses to create itself on non-SSE2 CPUs due to
an alleged LLVM bug.
However, this is implemented improperly, because other parts of draw
still attempt to access draw->llvm, resulting in segfaults.
Instead, put the check in debug_get_option_draw_use_llvm, check that
before calling draw_llvm_create, and then check whether draw->llvm is
non-null everywhere else.
Luca Barbieri [Tue, 10 Aug 2010 00:14:04 +0000 (02:14 +0200)]
translate_sse: major rewrite (v5)
NOTE: Win64 is untested, and is thus currently disabled.
If you have such a system, please enable it and report whether it works.
To enable it, change src/gallium/auxiliary/translate/translate.c
Changes in v5:
- On Win64, preserve %xmm6 and %xmm7 as required by the ABI
- Use _WIN64 instead of WIN64
Changes in v4:
- Use x86_target() and x86_target_caps()
- Enable translate_sse in x86-64, but not in Win64
Changes in v3:
- Win64 support (untested)
- Use u_cpu_detect.h constants instead of #ifs
Changes in v2:
- Minimize #ifs
- Give a name to magic number CHANNELS_0001
- Add support for CPUs without SSE (only memcpy and swizzles, like non SSE2)
- Fixed comments
translate_sse is currently very limited to the point of
being useless in essentially all cases.
In particular, it only support some float32 and unorm8
formats and doesn't work on x86-64.
This commit rewrites it to support:
1. Dumb memory copy for any pair of identical formats
2. All formats that are swizzles of each other
3. Converting 32/64-bit floats and all 8/16/32-bit integers to 32-bit float
4. Converting unorm8/snorm8 to snorm16 and uscaled8/sscaled8 to sscaled16
5. Support for x86-64 (doesn't take advantage of it in any way though)
This new translate can even be useful to translate index buffers for
cards that lack 8-bit index support.
It passes the testsuite I wrote, but note that this is a major change, and more
testing would be great.
Luca Barbieri [Thu, 12 Aug 2010 16:27:02 +0000 (18:27 +0200)]
rtasm: add minimal x86-64 support and new instructions (v5)
Changes in v5:
- Add sse2_movdqa
Changes in v4:
- Use _WIN64 instead of WIN64
Changes in v3:
- Add target and target caps functions, so that they could be different in
principle from the current CPU and they don't need #ifs to check
Changes in v2:
- Win64 support (untested)
- Use u_cpu_detect.h constants instead of #ifs
This commit adds minimal x86-64 support: only movs between registers
are supported for r8-r15, and x64_rexw() must be used to ask for 64-bit
operations.
It also adds several new instructions for the new translate_sse code.
movdqa
Luca Barbieri [Tue, 10 Aug 2010 08:47:23 +0000 (10:47 +0200)]
translate: add support for 8/16-bit indices
Currently, only 32-bit indices are supported, but some use cases
translate needs support for all types.
Luca Barbieri [Tue, 10 Aug 2010 08:31:48 +0000 (10:31 +0200)]
translate_sse: remove useless generated function wrappers
Currently translate_sse puts two trivial wrappers in the translate vtable.
These slow it down and enlarge the source code for no gain, except perhaps
the ability to set a breakpoint there, so remove them.
Breakpoints can be set on the caller of the translate functions, with no
loss of functionality.
Luca Barbieri [Tue, 10 Aug 2010 08:27:14 +0000 (10:27 +0200)]
translate_generic: factor out common code between linear and indexed
This moves the common code into a separate ALWAYS_INLINE function.
Luca Barbieri [Tue, 10 Aug 2010 07:51:20 +0000 (09:51 +0200)]
translate_generic: use memcpy if possible (v3)
Changes in v3:
- If we can do a copy, don't try to get an emit func, as that can assert(0)
Changes in v2:
- Add comment regarding copy_size
When used in GPU drivers, translate can be used to simultaneously
perform a gather operation, and convert away from unsupported formats.
In this use case, input and output formats will often be identical: clearly
it would make sense to use a memcpy in this case.
Instead, translate will insist to convert to and from 32-bit floating point
numbers.
This is not only extremely expensive, but it also loses precision for
32/64-bit integers and 64-bit floating point numbers.
This patch changes translate_generic to just use memcpy if the formats are
identical, non-blocked, and with an integral number of bytes per pixel (note
that all sensible vertex formats are like this).
Chia-I Wu [Mon, 16 Aug 2010 14:00:45 +0000 (22:00 +0800)]
drwa: Fix polygon edge flags.
Fix a copy-and-paste error introduced by
f141abdc8fdbff41e16b0ce53fa3fa8fba32a7f9.
Chia-I Wu [Mon, 9 Aug 2010 17:05:25 +0000 (01:05 +0800)]
draw: No need to make max_vertices even.
Triangle strip alternates the front/back orientation of its triangles.
max_vertices was made even so that varray never splitted a triangle
strip at the wrong positions.
It did not work with triangle strips with adjacencies. And it is no
longer relevant with vsplit.
Chia-I Wu [Sat, 7 Aug 2010 13:02:13 +0000 (21:02 +0800)]
draw: Remove DRAW_PIPE_MAX_VERTICES and DRAW_PIPE_FLAG_MASK.
The higher bits of draw elements are no longer used for the stipple or
edge flags.
Chia-I Wu [Fri, 13 Aug 2010 16:05:28 +0000 (00:05 +0800)]
drwa: Add PRIMITIVE macro to vsplit.
PRIMITIVE is used by the indexed path to flush the entire primitive with
custom vertex count checks. It replaces the existing fast path.
Chia-I Wu [Mon, 9 Aug 2010 16:39:23 +0000 (00:39 +0800)]
draw: last_vertex_last is always true for GS and SO.
That is, OpenGL decomposition rule is assumed. There should be a
pipe_context state to specify the rules.
Chia-I Wu [Sat, 7 Aug 2010 07:18:24 +0000 (15:18 +0800)]
draw: Remove varray and vcache.
They have been deprecated by vsplit.
Chia-I Wu [Sat, 7 Aug 2010 12:44:02 +0000 (20:44 +0800)]
draw: Replace vcache by vsplit.
vcache decomposes primitives while vsplit splits primitives. Splitting
is generally easier to do and is faster. More importantly, vcache
depends on flatshade_first to decompose. The outputs may have incorrect
vertex order which is significant to GS.
Chia-I Wu [Sat, 7 Aug 2010 07:12:14 +0000 (15:12 +0800)]
draw: Replace varray by vsplit.
vsplit is a superset of varray. It sets the split flags comparing to
varray.
Chia-I Wu [Fri, 6 Aug 2010 19:36:18 +0000 (03:36 +0800)]
draw: Add vsplit frontend.
vsplit is based on varray. It sets the split flags when a primitive is
splitted. It also has support for indexed primitives.
For indexed primitives, unlike vcache, vsplit splits the primitives
instead of decomposes them.
Chia-I Wu [Sat, 7 Aug 2010 06:37:26 +0000 (14:37 +0800)]
draw: Add new util function draw_pt_trim_count.
draw_pt_trim_count is renamed from trim in draw_pt.c.
Chia-I Wu [Sun, 18 Jul 2010 08:53:57 +0000 (16:53 +0800)]
draw: Simplify frontend interface a little.
The run method is simplified to take the start vertex and the vertex
count.
Chia-I Wu [Sat, 7 Aug 2010 16:53:02 +0000 (00:53 +0800)]
draw: Add prim flags to middle ends.
Update the middle end interface to pass the primitive flags from the
frontends to the pipeline. No frontend sets the flags yet.
Chia-I Wu [Sat, 7 Aug 2010 17:13:26 +0000 (01:13 +0800)]
draw: Add flags to draw_prim_info.
A primitive may be splitted in frontends. The splitted primitives
should convey certain flag bits so that the decomposer can correctly
decide the stipple or edge flags.
This commit adds flags to draw_prim_info and updates the decomposer to
honor the flags. Frontends and middle ends will be updated later.
nobled [Fri, 13 Aug 2010 20:23:11 +0000 (20:23 +0000)]
st/mesa: test for FEATURE defines
'struct dd_function_table' only conditionally contains
the function pointer NewFramebuffer and friends based on
FEATURE_EXT_framebuffer_* defines. (See src/mesa/main/dd.h)
Fixes the build when the features are disabled and the vfuncs
don't exist.
nobled [Tue, 13 Jul 2010 02:53:32 +0000 (22:53 -0400)]
dri/nouveau: test for FEATURE defines
'struct dd_function_table' only conditionally contains
the function pointer NewFramebuffer and friends based on
FEATURE_EXT_framebuffer_* defines. (See src/mesa/main/dd.h)
Fixes the build when the features are disabled and the vfuncs
don't exist.
nobled [Tue, 13 Jul 2010 01:22:08 +0000 (21:22 -0400)]
dri/radeon: test for FEATURE defines
'struct dd_function_table' only conditionally contains
the function pointer NewFramebuffer and friends based on
FEATURE_EXT_framebuffer_* defines. (See src/mesa/main/dd.h)
Fixes the build when the features are disabled and the vfuncs
don't exist.
Vinson Lee [Mon, 16 Aug 2010 07:26:10 +0000 (00:26 -0700)]
x86: Remove unnecessary header from sse.h.
Vinson Lee [Mon, 16 Aug 2010 06:29:09 +0000 (23:29 -0700)]
x86: Include missing headers in mmx.h.
Include compiler.h for _ASMAPI symbol.
Include mtypes.h for GLcontext symbol.
Vinson Lee [Mon, 16 Aug 2010 06:10:42 +0000 (23:10 -0700)]
x86: Remove unnecessary header from 3dnow.h.
Vinson Lee [Mon, 16 Aug 2010 05:44:29 +0000 (22:44 -0700)]
glsl: Clean up header file inclusion in slang_typeinfo.h.
Remove imports.h, mtypes.h, and slang_vartable.h.
Include glheader.h for GL symbols.
Vinson Lee [Mon, 16 Aug 2010 05:39:51 +0000 (22:39 -0700)]
glsl: Include missing header in slang_codegen.h.
Include slang_vartable.h for slang_var_table symbol.
Vinson Lee [Mon, 16 Aug 2010 05:38:23 +0000 (22:38 -0700)]
glsl: Include missing header in slang_compile_operation.h.
Include compiler.h for INLINE symbol.
Vinson Lee [Mon, 16 Aug 2010 05:26:27 +0000 (22:26 -0700)]
glsl: Clean up header file inclusion in slang_storage.h.
Remove slang_compile.h.
Include glheader.h for GL symbols.
Include slang_compile_function.h for slang_function_scope symbol.
Include slang_compile_struct.h for slang_struct_scope symbol.
Include slang_compile_variable.h for slang_variable_scope symbol.
Include slang_typeinfo.h for slang_type_specifier symbol.
Include slang_utility.h for slang_atom_pool symbol.
Vinson Lee [Mon, 16 Aug 2010 05:07:04 +0000 (22:07 -0700)]
glsl: Clean up header file inclusion in slang_mem.h.
slang_mem.h
Remove imports.h.
Include glheader.h for GL symbols.
slang_label.c
Include imports.h now that slang_mem.c does not include it.
Vinson Lee [Mon, 16 Aug 2010 04:17:50 +0000 (21:17 -0700)]
glsl: Clean up header file inclusion in slang_ir.h.
Remove imports.h and slang_compile.h.
Include glheader.h for GL symbols.
Include slang_compile_variable.h for slang_variable symbol.
Vinson Lee [Mon, 16 Aug 2010 04:13:32 +0000 (21:13 -0700)]
glsl: Include missing header in slang_link.c.
Include slang_compile.h for _slang_compile function.
Vinson Lee [Mon, 16 Aug 2010 04:10:16 +0000 (21:10 -0700)]
glsl: Include missing headers in slang_builtin.c.
Include slang_typeinfo.h for slang_type_specifier symbol.
Include slang_compiler_struct.h for slang_struct_ symbol.
Marek Olšák [Mon, 16 Aug 2010 03:05:43 +0000 (05:05 +0200)]
r300g: fix an invalid pointer in free
nobled [Sun, 15 Aug 2010 03:53:18 +0000 (03:53 +0000)]
r300g: Let hyperz init fail
Signed-off-by: Marek Olšák <maraeo@gmail.com>
nobled [Sun, 15 Aug 2010 03:59:15 +0000 (03:59 +0000)]
r300g: Fix leaks in failed context creation
This changes r300_destroy_context() so it can be called
on a partially-initialized context, and uses it when
r300_create_context() hits a fatal error.
This makes sure r300_create_context() doesn't leak memory
or neglect to call r300_update_num_contexts() when it fails.
Signed-off-by: Marek Olšák <maraeo@gmail.com>
nobled [Sun, 15 Aug 2010 02:50:04 +0000 (02:50 +0000)]
r300g: Fix macro
This fixes a potential bug if (has_hyperz) is false
(it would still init the atom as if has_hyperz were true).
Signed-off-by: Marek Olšák <maraeo@gmail.com>
Marek Olšák [Sun, 15 Aug 2010 23:53:30 +0000 (01:53 +0200)]
st/mesa: remove output register reads inside shaders
This is a GLSL2 regression fix.
Marek Olšák [Sun, 15 Aug 2010 21:44:16 +0000 (23:44 +0200)]
r300/compiler: implement DP2 opcode
Marek Olšák [Sun, 15 Aug 2010 20:53:17 +0000 (22:53 +0200)]
r300/compiler: implement SSG opcode
Marek Olšák [Sun, 15 Aug 2010 20:52:07 +0000 (22:52 +0200)]
r300/compiler: fix allocation of temporaries in radeonTransformTEX
Keith Whitwell [Sun, 15 Aug 2010 21:58:26 +0000 (22:58 +0100)]
llvmpipe: special case triangles which fall in a single 16x16 block
Check for these and route them to a dedicated handler with one fewer
levels of recursive rasterization.
Vinson Lee [Sun, 15 Aug 2010 20:08:15 +0000 (13:08 -0700)]
mesa: Check that _XOPEN_SOURCE is defined before using it.
Keith Whitwell [Sun, 15 Aug 2010 16:40:39 +0000 (17:40 +0100)]
llvmpipe: consolidate several loops in lp_rast_triangle
Keith Whitwell [Sun, 15 Aug 2010 16:31:13 +0000 (17:31 +0100)]
llvmpipe: remove all traces of step arrays, pos_tables
No need to calculate these values any longer, nor to store them in the
bin data. Improves isosurf a bit more, 115->123 fps.
Keith Whitwell [Sun, 15 Aug 2010 16:24:54 +0000 (17:24 +0100)]
llvmpipe: eliminate last usage of step array in rast_tmp.h
For 16 and 64 pixel levels, calculate a mask which is linear in x and
y (ie not in the swizzle layout).
When iterating over full and partial masks, figure out position by
manipulating the bit number set in the mask, rather than relying on
postion arrays.
Similarly, calculate the lower-level c values from dcdx, dcdy and the
position rather than relying on the step array.
Keith Whitwell [Sun, 15 Aug 2010 16:22:25 +0000 (17:22 +0100)]
llvmpipe: don't refer to plane->step when dcdx or dcdy would do
Keith Whitwell [Sun, 15 Aug 2010 15:49:26 +0000 (16:49 +0100)]
llvmpipe: also use build_mask at 16, 64 pixel levels