OSDN Git Service
Maxime Ripard [Mon, 25 Oct 2021 14:11:07 +0000 (16:11 +0200)]
drm/vc4: crtc: Copy assigned channel to the CRTC
Accessing the crtc->state pointer from outside the modesetting context
is not allowed. We thus need to copy whatever we need from the KMS state
to our structure in order to access it.
In VC4, a number of users of that pointers have crept in over the years,
and the previous commits removed them all but the HVS channel a CRTC has
been assigned.
Let's move this channel in struct vc4_crtc at atomic_begin() time, drop
it from our private state structure, and remove our use of crtc->state
from our vblank handler entirely.
Link: https://lore.kernel.org/all/YWgteNaNeaS9uWDe@phenom.ffwll.local/
Link: https://lore.kernel.org/r/20211025141113.702757-4-maxime@cerno.tech
Fixes:
87ebcd42fb7b ("drm/vc4: crtc: Assign output to channel automatically")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Maxime Ripard [Mon, 25 Oct 2021 14:11:06 +0000 (16:11 +0200)]
drm/vc4: Fix non-blocking commit getting stuck forever
In some situation, we can end up being stuck on a non-blocking that went
through properly.
The situation that seems to trigger it reliably is to first start a
non-blocking commit, and then right after, and before we had any vblank
interrupt), start a blocking commit.
This will lead to the first commit workqueue to be scheduled, setup the
display, while the second commit is waiting for the first one to be
completed.
The vblank interrupt will then be raised, vc4_crtc_handle_vblank() will
run and will compare the active dlist in the HVS channel to the one
associated with the crtc->state.
However, at that point, the second commit is waiting using
drm_atomic_helper_wait_for_dependencies that occurs after
drm_atomic_helper_swap_state has been called, so crtc->state points to
the second commit state. vc4_crtc_handle_vblank() will compare the two
dlist addresses and since they don't match will ignore the interrupt.
The vblank event will never be reported, and the first and second commit
will wait for the first commit completion until they timeout.
The underlying reason is that it was never safe to do so. Indeed,
accessing the ->state pointer access synchronization is based on
ownership guarantees that can only occur within the functions and hooks
defined as part of the KMS framework, and obviously the irq handler
isn't one of them. The rework to move to generic helpers only uncovered
the underlying issue.
However, since the code path between
drm_atomic_helper_wait_for_dependencies() and
drm_atomic_helper_wait_for_vblanks() is serialised and we can't get two
commits in that path at the same time, we can work around this issue by
setting a variable associated to struct drm_crtc to the dlist we expect,
and then using it from the vc4_crtc_handle_vblank() function.
Since that state is shared with the modesetting path, we also need to
introduce a spinlock to protect the code shared between the interrupt
handler and the modesetting path, protecting only our new variable for
now.
Link: https://lore.kernel.org/all/YWgteNaNeaS9uWDe@phenom.ffwll.local/
Link: https://lore.kernel.org/r/20211025141113.702757-3-maxime@cerno.tech
Fixes:
56d1fe0979dc ("drm/vc4: Make pageflip completion handling more robust.")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Maxime Ripard [Mon, 25 Oct 2021 14:11:05 +0000 (16:11 +0200)]
drm/vc4: crtc: Drop feed_txp from state
Accessing the crtc->state pointer from outside the modesetting context
is not allowed. We thus need to copy whatever we need from the KMS state
to our structure in order to access it.
In VC4, a number of users of that pointers have crept in over the years,
the first one being whether or not the downstream controller of the
pixelvalve is our writeback controller.
Fortunately for us, Since commit
39fcb2808376 ("drm/vc4: txp: Turn the
TXP into a CRTC of its own") this is no longer something that can change
from one commit to the other and is hardcoded.
Let's set this flag in struct vc4_crtc if we happen to be the TXP, and
drop the flag from our private state structure.
Link: https://lore.kernel.org/all/YWgteNaNeaS9uWDe@phenom.ffwll.local/
Link: https://lore.kernel.org/r/20211025141113.702757-2-maxime@cerno.tech
Fixes:
008095e065a8 ("drm/vc4: Add support for the transposer block")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Brian Norris [Wed, 3 Nov 2021 20:52:00 +0000 (13:52 -0700)]
drm/bridge: analogix_dp: Make PSR-exit block less
Prior to commit
6c836d965bad ("drm/rockchip: Use the helpers for PSR"),
"PSR exit" used non-blocking analogix_dp_send_psr_spd(). The refactor
started using the blocking variant, for a variety of reasons -- quoting
Sean Paul's potentially-faulty memory:
"""
- To avoid racing a subsequent PSR entry (if exit takes a long time)
- To avoid racing disable/modeset
- We're not displaying new content while exiting PSR anyways, so there
is minimal utility in allowing frames to be submitted
- We're lying to userspace telling them frames are on the screen when
we're just dropping them on the floor
"""
However, I'm finding that this blocking transition is causing upwards of
60+ ms of unneeded latency on PSR-exit, to the point that initial cursor
movements when leaving PSR are unbearably jumpy.
It turns out that we need to meet in the middle somewhere: Sean is right
that we were "lying to userspace" with a non-blocking PSR-exit, but the
new blocking behavior is also waiting too long:
According to the eDP specification, the sink device must support PSR
entry transitions from both state 4 (ACTIVE_RESYNC) and state 0
(INACTIVE). It also states that in ACTIVE_RESYNC, "the Sink device must
display the incoming active frames from the Source device with no
visible glitches and/or artifacts."
Thus, for our purposes, we only need to wait for ACTIVE_RESYNC before
moving on; we are ready to display video, and subsequent PSR-entry is
safe.
Tested on a Samsung Chromebook Plus (i.e., Rockchip RK3399 Gru Kevin),
where this saves about 60ms of latency, for PSR-exit that used to
take about 80ms.
Fixes:
6c836d965bad ("drm/rockchip: Use the helpers for PSR")
Cc: <stable@vger.kernel.org>
Cc: Zain Wang <wzz@rock-chips.com>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211103135112.v3.1.I67612ea073c3306c71b46a87be894f79707082df@changeid
Xin Ji [Thu, 4 Nov 2021 03:38:57 +0000 (11:38 +0800)]
drm/bridge: anx7625: add HDMI audio function
Add audio HDMI codec function support, enable it through device true
flag "analogix,audio-enable".
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211104033857.2634562-1-xji@analogixsemi.com
Xin Ji [Thu, 4 Nov 2021 03:36:39 +0000 (11:36 +0800)]
drm/bridge: anx7625: add MIPI DPI input feature
The basic anx7625 driver only support MIPI DSI rx signal input.
This patch add MIPI DPI rx input configuration support, after apply
this patch, the driver can support DSI rx or DPI rx by adding
'bus-type' in DT.
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211104033639.2634502-1-xji@analogixsemi.com
Xin Ji [Thu, 4 Nov 2021 03:36:09 +0000 (11:36 +0800)]
drm/bridge: anx7625: fix not correct return value
At some time, the original code may return non zero value, force return 0
if operation finished.
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211104033609.2634452-1-xji@analogixsemi.com
Xin Ji [Thu, 4 Nov 2021 03:34:44 +0000 (11:34 +0800)]
dt-bindings:drm/bridge:anx7625:add vendor define
Add 'bus-type' and 'data-lanes' define for port0. Add DP tx lane0,
lane1 swing register setting array, and audio enable flag.
The device which cannot pass DP tx PHY CTS caused by long PCB trace or
embedded MUX, adjusting ANX7625 PHY parameters can pass the CTS test. The
adjusting type include Pre-emphasis, Vp-p, Rterm(Resistor Termination)
and Rsel(Driven Strength). Each lane has maximum 20 registers for
these settings.
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211104033444.2634397-1-xji@analogixsemi.com
Maxime Ripard [Mon, 25 Oct 2021 15:29:03 +0000 (17:29 +0200)]
drm/vc4: Increase the core clock based on HVS load
Depending on a given HVS output (HVS to PixelValves) and input (planes
attached to a channel) load, the HVS needs for the core clock to be
raised above its boot time default.
Failing to do so will result in a vblank timeout and a stalled display
pipeline.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20211025152903.1088803-11-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:29:02 +0000 (17:29 +0200)]
drm/vc4: hdmi: Enable the scrambler on reconnection
If we have a state already and disconnect/reconnect the display, the
SCDC messages won't be sent again since we didn't go through a disable /
enable cycle.
In order to fix this, let's call the vc4_hdmi_enable_scrambling function
in the detect callback if there is a mode and it needs the scrambler to
be enabled.
Fixes:
c85695a2016e ("drm/vc4: hdmi: Enable the scrambler")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20211025152903.1088803-10-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:29:01 +0000 (17:29 +0200)]
drm/vc4: hdmi: Raise the maximum clock rate
Now that we have the infrastructure in place, we can raise the maximum
pixel rate we can reach for HDMI0 on the BCM2711.
HDMI1 is left untouched since its pixelvalve has a smaller FIFO and
would need a clock faster than what we can provide to support the same
modes.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211025152903.1088803-9-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:29:00 +0000 (17:29 +0200)]
drm/vc4: Leverage the load tracker on the BCM2711
The load tracker was initially designed to report and warn about a load
too high for the HVS. To do so, it computes for each plane the impact
it's going to have on the HVS, and will warn (if it's enabled) if we go
over what the hardware can process.
While the limits being used are a bit irrelevant to the BCM2711, the
algorithm to compute the HVS load will be one component used in order to
compute the core clock rate on the BCM2711.
Let's remove the hooks to prevent the load tracker to do its
computation, but since we don't have the same limits, don't check them
against them, and prevent the debugfs file to enable it from being
created.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20211025152903.1088803-8-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:28:59 +0000 (17:28 +0200)]
drm/vc4: crtc: Add some logging
The encoder retrieval code has been a source of bugs and glitches in the
past and the crtc <-> encoder association been wrong in a number of
different ways.
Add some logging to quickly spot issues if they occur.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20211025152903.1088803-7-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:28:58 +0000 (17:28 +0200)]
drm/vc4: crtc: Rework the encoder retrieval code (again)
It turns out the encoder retrieval code, in addition to being
unnecessarily complicated, has a bug when only the planes and crtcs are
affected by a given atomic commit.
Indeed, in such a case, either drm_atomic_get_old_connector_state or
drm_atomic_get_new_connector_state will return NULL and thus our encoder
retrieval code will not match on anything.
We can however simplify the code by using drm_for_each_encoder_mask, the
drm_crtc_state storing the encoders a given CRTC is connected to
directly and without relying on any other state.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20211025152903.1088803-6-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:28:57 +0000 (17:28 +0200)]
drm/vc4: crtc: Add encoder to vc4_crtc_config_pv prototype
vc4_crtc_config_pv() retrieves the encoder again, even though its only
caller, vc4_crtc_atomic_enable(), already did.
Pass the encoder pointer as an argument instead of going through all the
connectors to retrieve it again.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20211025152903.1088803-5-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:28:56 +0000 (17:28 +0200)]
drm/vc4: Make vc4_crtc_get_encoder public
We'll need that function in vc4_kms to compute the core clock rate
requirements.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20211025152903.1088803-4-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:28:55 +0000 (17:28 +0200)]
drm/vc4: hdmi: Fix HPD GPIO detection
Prior to commit
6800234ceee0 ("drm/vc4: hdmi: Convert to gpiod"), in the
detect hook, if we had an HPD GPIO we would only rely on it and return
whatever state it was in.
However, that commit changed that by mistake to only consider the case
where we have a GPIO and it returns a logical high, and would fall back
to the other methods otherwise.
Since we can read the EDIDs when the HPD signal is low on some displays,
we changed the detection status from disconnected to connected, and we
would ignore an HPD pulse.
Fixes:
6800234ceee0 ("drm/vc4: hdmi: Convert to gpiod")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20211025152903.1088803-3-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:28:54 +0000 (17:28 +0200)]
drm/vc4: hdmi: Remove the DDC probing for status detection
Commit
9d44abbbb8d5 ("drm/vc4: Fall back to using an EDID probe in the
absence of a GPIO.") added some code to read the EDID through DDC in the
HDMI driver detect hook since the Pi3 had no HPD GPIO back then.
However, commit
b1b8f45b3130 ("ARM: dts: bcm2837: Add missing GPIOs of
Expander") changed that a couple of years later.
This causes an issue though since some TV (like the LG 55C8) when it
comes out of standy will deassert the HPD line, but the EDID will
remain readable.
It causes an issues nn platforms without an HPD GPIO, like the Pi4,
where the DDC probing will be our primary mean to detect a display, and
thus we will never detect the HPD pulse. This was fine before since the
pulse was small enough that we would never detect it, and we also didn't
have anything (like the scrambler) that needed to be set up in the
display.
However, now that we have both, the display during the HPD pulse will
clear its scrambler status, and since we won't detect the
disconnect/reconnect cycle we will never enable the scrambler back.
As our main reason for that DDC probing is gone, let's just remove it.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20211025152903.1088803-2-maxime@cerno.tech
Christian König [Wed, 27 Oct 2021 11:30:40 +0000 (13:30 +0200)]
drm/radeon: use dma_resv_wait_timeout() instead of manually waiting
Don't touch the exclusive fence manually here, but rather use the
general dma_resv function. We did that for better hw reset handling but
this doesn't necessary work correctly.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deuche <alexander.deucher@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211028132630.2330-6-christian.koenig@amd.com
Christian König [Wed, 22 Sep 2021 12:16:25 +0000 (14:16 +0200)]
drm/etnaviv: stop getting the excl fence separately here
Just grab all fences in one go.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211028132630.2330-3-christian.koenig@amd.com
Simon Ser [Mon, 18 Oct 2021 08:47:31 +0000 (08:47 +0000)]
i915/display/dp: send a more fine-grained link-status uevent
When link-status changes, send a hotplug uevent which contains the
connector ID. That way, user-space can more easily figure out that
only this connector has been updated.
Changes in v4: avoid sending two uevents (Ville)
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018084707.32253-7-contact@emersion.fr
Simon Ser [Mon, 18 Oct 2021 08:47:30 +0000 (08:47 +0000)]
drm/probe-helper: use drm_kms_helper_connector_hotplug_event
If an hotplug event only updates a single connector, use
drm_kms_helper_connector_hotplug_event instead of
drm_kms_helper_hotplug_event.
Changes in v4:
- Simplify loop logic (Ville, Sam)
- Update drm_connector_helper_hpd_irq_event (Maxime)
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018084707.32253-6-contact@emersion.fr
Simon Ser [Mon, 18 Oct 2021 08:47:28 +0000 (08:47 +0000)]
amdgpu: use drm_kms_helper_connector_hotplug_event
When updating a single connector, use
drm_kms_helper_connector_hotplug_event instead of
drm_kms_helper_hotplug_event.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018084707.32253-5-contact@emersion.fr
Simon Ser [Mon, 18 Oct 2021 08:47:27 +0000 (08:47 +0000)]
drm/connector: use drm_sysfs_connector_hotplug_event
In drm_connector_register, use drm_sysfs_connector_hotplug_event
instead of drm_sysfs_hotplug_event, because the hotplug event
only updates a single connector.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018084707.32253-4-contact@emersion.fr
Simon Ser [Mon, 18 Oct 2021 08:47:26 +0000 (08:47 +0000)]
drm/probe-helper: add drm_kms_helper_connector_hotplug_event
This function is the same as drm_kms_helper_hotplug_event, but takes
a connector instead of a device.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018084707.32253-3-contact@emersion.fr
Simon Ser [Mon, 18 Oct 2021 08:47:25 +0000 (08:47 +0000)]
drm/sysfs: introduce drm_sysfs_connector_hotplug_event
This function sends a hotplug uevent with a CONNECTOR property.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018084707.32253-2-contact@emersion.fr
Andrey Grodzovsky [Thu, 28 Oct 2021 16:24:03 +0000 (12:24 -0400)]
drm/sched: Avoid lockdep spalt on killing a processes
Probelm:
Singlaning one sched fence from within another's sched
fence singal callback generates lockdep splat because
the both have same lockdep class of their fence->lock
Fix:
Fix bellow stack by rescheduling to irq work of
signaling and killing of jobs that left when entity is killed.
[11176.741181] dump_stack+0x10/0x12
[11176.741186] __lock_acquire.cold+0x208/0x2df
[11176.741197] lock_acquire+0xc6/0x2d0
[11176.741204] ? dma_fence_signal+0x28/0x80
[11176.741212] _raw_spin_lock_irqsave+0x4d/0x70
[11176.741219] ? dma_fence_signal+0x28/0x80
[11176.741225] dma_fence_signal+0x28/0x80
[11176.741230] drm_sched_fence_finished+0x12/0x20 [gpu_sched]
[11176.741240] drm_sched_entity_kill_jobs_cb+0x1c/0x50 [gpu_sched]
[11176.741248] dma_fence_signal_timestamp_locked+0xac/0x1a0
[11176.741254] dma_fence_signal+0x3b/0x80
[11176.741260] drm_sched_fence_finished+0x12/0x20 [gpu_sched]
[11176.741268] drm_sched_job_done.isra.0+0x7f/0x1a0 [gpu_sched]
[11176.741277] drm_sched_job_done_cb+0x12/0x20 [gpu_sched]
[11176.741284] dma_fence_signal_timestamp_locked+0xac/0x1a0
[11176.741290] dma_fence_signal+0x3b/0x80
[11176.741296] amdgpu_fence_process+0xd1/0x140 [amdgpu]
[11176.741504] sdma_v4_0_process_trap_irq+0x8c/0xb0 [amdgpu]
[11176.741731] amdgpu_irq_dispatch+0xce/0x250 [amdgpu]
[11176.741954] amdgpu_ih_process+0x81/0x100 [amdgpu]
[11176.742174] amdgpu_irq_handler+0x26/0xa0 [amdgpu]
[11176.742393] __handle_irq_event_percpu+0x4f/0x2c0
[11176.742402] handle_irq_event_percpu+0x33/0x80
[11176.742408] handle_irq_event+0x39/0x60
[11176.742414] handle_edge_irq+0x93/0x1d0
[11176.742419] __common_interrupt+0x50/0xe0
[11176.742426] common_interrupt+0x80/0x90
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Suggested-by: Christian König <christian.koenig@amd.com>
Tested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/dri-devel/msg321250.html
Paul Cercueil [Sat, 30 Oct 2021 10:00:32 +0000 (11:00 +0100)]
drm/ingenic: Remove bogus register write
Commit
1bdb542da736 ("drm/ingenic: Simplify code by using hwdescs
array") caused the dma_hwdesc_phys_f{0,1} variables to be used while
uninitialized in a mmio register write, which most certainly broke the
ingenic-drm driver.
However, the very same patchset also submitted commit
6055466203df
("drm/ingenic: Upload palette before frame"), which restored a correct
behaviour by doing the register writes in a different place in the code.
What's left of this, is just to remove the bogus register writes in the
probe function.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211030100032.42066-1-paul@crapouillou.net
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Paul Cercueil [Tue, 26 Oct 2021 18:12:40 +0000 (19:12 +0100)]
drm/ingenic: Attach bridge chain to encoders
Attach a top-level bridge to each encoder, which will be used for
negociating the bus format and flags.
All the bridges are now attached with DRM_BRIDGE_ATTACH_NO_CONNECTOR.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026181240.213806-7-paul@crapouillou.net
Tested-by: Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Christophe Branchereau <cbranchereau@gmail.com>
Paul Cercueil [Tue, 26 Oct 2021 18:12:39 +0000 (19:12 +0100)]
drm/ingenic: Upload palette before frame
When using C8 color mode, make sure that the palette is always uploaded
before a frame; otherwise the very first frame will have wrong colors.
Do that by changing the link order of the DMA descriptors.
v3: Fix ingenic_drm_get_new_priv_state() called instead of
ingenic_drm_get_priv_state()
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026181240.213806-6-paul@crapouillou.net
Tested-by: Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Christophe Branchereau <cbranchereau@gmail.com>
Paul Cercueil [Tue, 26 Oct 2021 18:12:38 +0000 (19:12 +0100)]
drm/ingenic: Set DMA descriptor chain register when starting CRTC
Setting the DMA descriptor chain register in the probe function has been
fine until now, because we only ever had one descriptor per foreground.
As the driver will soon have real descriptor chains, and the DMA
descriptor chain register updates itself to point to the current
descriptor being processed, this register needs to be reset after a full
modeset to point to the first descriptor of the chain.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026181240.213806-5-paul@crapouillou.net
Tested-by: Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Christophe Branchereau <cbranchereau@gmail.com>
Paul Cercueil [Tue, 26 Oct 2021 18:12:37 +0000 (19:12 +0100)]
drm/ingenic: Move IPU scale settings to private state
The IPU scaling information is computed in the plane's ".atomic_check"
callback, and used in the ".atomic_update" callback. As such, it is
state-specific, and should be moved to a private state structure.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026181240.213806-4-paul@crapouillou.net
Tested-by: Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Christophe Branchereau <cbranchereau@gmail.com>
Paul Cercueil [Tue, 26 Oct 2021 18:12:36 +0000 (19:12 +0100)]
drm/ingenic: Add support for private objects
Until now, the ingenic-drm as well as the ingenic-ipu drivers used to
put state-specific information in their respective private structure.
Add boilerplate code to support private objects in the two drivers, so
that state-specific information can be put in the state-specific private
structure.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026181240.213806-3-paul@crapouillou.net
Tested-by: Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Christophe Branchereau <cbranchereau@gmail.com>
Paul Cercueil [Tue, 26 Oct 2021 18:12:35 +0000 (19:12 +0100)]
drm/ingenic: Simplify code by using hwdescs array
Instead of having one 'hwdesc' variable for the plane #0, one for the
plane #1 and one for the palette, use a 'hwdesc[3]' array, where the
DMA hardware descriptors are indexed by the plane's number.
v2: dma_hwdesc_addr() extended to support palette hwdesc. The palette
hwdesc is now hwdesc[3] to simplify things. Add
ingenic_drm_configure_hwdesc*() functions to factorize code.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026181240.213806-2-paul@crapouillou.net
Tested-by: Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Christophe Branchereau <cbranchereau@gmail.com>
Marcel Ziswiler [Wed, 27 Oct 2021 21:25:05 +0000 (23:25 +0200)]
drm: import DMA_BUF module namespace
Today's -next fails building arm64 defconfig as follows:
ERROR: modpost: module drm_cma_helper uses symbol dma_buf_vunmap from
namespace DMA_BUF, but does not import it.
ERROR: modpost: module drm_cma_helper uses symbol dma_buf_vmap from
namespace DMA_BUF, but does not import it.
Fix this by importing DMA_BUF namespace into drm_cma_helper.ko. Also
fix the problem with drm_shmem_helper.ko.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Fixes:
4b2b5e142ff4 ("drm: Move GEM memory managers into modules")
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211027212506.3418521-1-marcel@ziswiler.com
Christian König [Mon, 13 Sep 2021 12:08:13 +0000 (14:08 +0200)]
drm/nouveau: use the new interator in nv50_wndw_prepare_fb
Makes the handling a bit more complex, but avoids the use of
dma_resv_get_excl_unlocked().
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-27-christian.koenig@amd.com
Colin Ian King [Thu, 30 Sep 2021 10:27:48 +0000 (11:27 +0100)]
drm/virtio: fix another potential integer overflow on shift of a int
The left shift of unsigned int 32 bit integer constant 1 is evaluated
using 32 bit arithmetic and then assigned to a signed 64 bit integer.
In the case where value is 32 or more this can lead to an overflow
(value can be in range 0..MAX_CAPSET_ID (63). Fix this by shifting
the value 1ULL instead.
Addresses-Coverity: ("Uninitentional integer overflow")
Fixes:
4fb530e5caf7 ("drm/virtio: implement context init: support init ioctl")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210930102748.16922-1-colin.king@canonical.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Colin Ian King [Thu, 30 Sep 2021 10:19:41 +0000 (11:19 +0100)]
drm/virtio: fix potential integer overflow on shift of a int
The left shift of unsigned int 32 bit integer constant 1 is evaluated
using 32 bit arithmetic and then assigned to a signed 64 bit integer.
In the case where i is 32 or more this can lead to an overflow. Fix
this by shifting the value 1ULL instead.
Addresses-Coverity: ("Uninitentional integer overflow")
Fixes:
8d6b006e1f51 ("drm/virtio: implement context init: handle VIRTGPU_CONTEXT_PARAM_POLL_RINGS_MASK")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210930101941.16546-1-colin.king@canonical.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Chia-I Wu [Thu, 28 Oct 2021 21:34:46 +0000 (14:34 -0700)]
MAINTAINERS: add reviewers for virtio-gpu
Add Gurchetan Singh and me as reviewers for virtio-gpu.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Acked-by: Gurchetan Singh <gurchetansingh@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20211028213446.955338-1-olvaffe@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Bjorn Andersson [Thu, 28 Oct 2021 16:35:48 +0000 (09:35 -0700)]
drm/bridge: sn65dsi86: ti_sn65dsi86_read_u16() __maybe_unused
When built without CONFIG_PWM there are no references to
ti_sn65dsi86_read_u16(), avoid the W=1 build warning by marking the
function as __maybe_unused.
__maybe_unused is used insted of a #ifdef guard as it looks slighly
cleaner and it avoids issues if in the future other permutations of the
config options would use the function.
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
cea86c5bb442 ("drm/bridge: ti-sn65dsi86: Implement the pwm_chip")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211028163548.273736-1-bjorn.andersson@linaro.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Guangming Cao [Thu, 14 Oct 2021 10:25:51 +0000 (18:25 +0800)]
dma-buf: remove restriction of IOCTL:DMA_BUF_SET_NAME
In this patch(https://patchwork.freedesktop.org/patch/310349),
it add a new IOCTL to support dma-buf user to set debug name.
But it also added a limitation of this IOCTL, it needs the
attachments of dmabuf should be empty, otherwise it will fail.
For the original series, the idea was that allowing name change
mid-use could confuse the users about the dma-buf.
However, the rest of the series also makes sure each dma-buf have a unique
inode(https://patchwork.freedesktop.org/patch/310387/), and any accounting
should probably use that, without relying on the name as much.
So, removing this restriction will let dma-buf userspace users to use it
more comfortably and without any side effect.
Signed-off-by: Guangming Cao <Guangming.Cao@mediatek.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014102551.54983-1-guangming.cao@mediatek.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Anitha Chrisanthus [Wed, 6 Oct 2021 23:27:21 +0000 (16:27 -0700)]
drm/kmb: Enable support for framebuffer console
Enable support for fbcon (framebuffer console).
v2: added missing static clk_enable
v3: removed module parameter, use fbdev_emulation instead. Use
preferred depth of 24 for color depth. (Thomas Z.)
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019230719.789958-2-anitha.chrisanthus@intel.com
Rob Clark [Mon, 25 Oct 2021 15:15:36 +0000 (17:15 +0200)]
drm/msm/dsi: Adjust probe order
Switch to the documented order dsi-host vs bridge probe.
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-22-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:15:35 +0000 (17:15 +0200)]
drm/kirin: dsi: Adjust probe order
Without proper care and an agreement between how DSI hosts and devices
drivers register their MIPI-DSI entities and potential components, we can
end up in a situation where the drivers can never probe.
Most drivers were taking evasive maneuvers to try to workaround this,
but not all of them were following the same conventions, resulting in
various incompatibilities between DSI hosts and devices.
Now that we have a sequence agreed upon and documented, let's convert
kirin to it.
Acked-by: John Stultz <john.stultz@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-21-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:15:34 +0000 (17:15 +0200)]
drm/bridge: tc358775: Register and attach our DSI device at probe
In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-20-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:15:33 +0000 (17:15 +0200)]
drm/bridge: tc358775: Switch to devm MIPI-DSI helpers
Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device. This also avoids leaking the device when we detach
the bridge.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-19-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:15:32 +0000 (17:15 +0200)]
drm/bridge: sn65dsi86: Register and attach our DSI device at probe
In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-18-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:15:31 +0000 (17:15 +0200)]
drm/bridge: sn65dsi86: Switch to devm MIPI-DSI helpers
Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device. This also avoids leaking the device when we detach
the bridge.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-17-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:15:30 +0000 (17:15 +0200)]
drm/bridge: sn65dsi83: Register and attach our DSI device at probe
In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-16-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:15:29 +0000 (17:15 +0200)]
drm/bridge: sn65dsi83: Switch to devm MIPI-DSI helpers
Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device. This also avoids leaking the device when we detach
the bridge but don't remove its driver.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-15-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:15:28 +0000 (17:15 +0200)]
drm/bridge: sn65dsi83: Fix bridge removal
Commit
24417d5b0c00 ("drm/bridge: ti-sn65dsi83: Implement .detach
callback") moved the unregistration of the bridge DSI device and bridge
itself to the detach callback.
While this is correct for the DSI device detach and unregistration, the
bridge is added in the driver probe, and should thus be removed as part
of its remove callback.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Fixes:
24417d5b0c00 ("drm/bridge: ti-sn65dsi83: Implement .detach callback")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-14-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:15:27 +0000 (17:15 +0200)]
drm/bridge: ps8640: Register and attach our DSI device at probe
In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-13-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:15:26 +0000 (17:15 +0200)]
drm/bridge: ps8640: Switch to devm MIPI-DSI helpers
Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device. This also avoids leaking the device on removal.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-12-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:15:25 +0000 (17:15 +0200)]
drm/bridge: lt9611uxc: Register and attach our DSI device at probe
In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-11-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:15:24 +0000 (17:15 +0200)]
drm/bridge: lt9611uxc: Switch to devm MIPI-DSI helpers
Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-10-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:15:23 +0000 (17:15 +0200)]
drm/bridge: lt9611: Register and attach our DSI device at probe
In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-9-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:15:22 +0000 (17:15 +0200)]
drm/bridge: lt9611: Switch to devm MIPI-DSI helpers
Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-8-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:15:21 +0000 (17:15 +0200)]
drm/bridge: lt8912b: Register and attach our DSI device at probe
In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-7-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:15:20 +0000 (17:15 +0200)]
drm/bridge: lt8912b: Switch to devm MIPI-DSI helpers
Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-6-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:15:19 +0000 (17:15 +0200)]
drm/bridge: anx7625: Register and attach our DSI device at probe
In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-5-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:15:18 +0000 (17:15 +0200)]
drm/bridge: anx7625: Switch to devm MIPI-DSI helpers
Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-4-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:15:17 +0000 (17:15 +0200)]
drm/bridge: adv7511: Register and attach our DSI device at probe
In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-3-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:15:16 +0000 (17:15 +0200)]
drm/bridge: adv7533: Switch to devm MIPI-DSI helpers
Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device. This also avoids leaking the device when we detach
the bridge.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-2-maxime@cerno.tech
Thomas Zimmermann [Tue, 26 Oct 2021 17:57:00 +0000 (19:57 +0200)]
drm: Link CMA framebuffer helpers into KMS helper library
Linking the CMA framebuffer helpers into a CMA helper library in
commit
4b2b5e142ff4 ("drm: Move GEM memory managers into modules")
results in linker errors:
arm-linux-gnueabihf-ld: drivers/gpu/drm/drm_fb_cma_helper.o: \
in function `drm_fb_cma_get_gem_obj': \
drivers/gpu/drm/drm_fb_cma_helper.c:46: undefined reference \
to `drm_gem_fb_get_obj'
arm-linux-gnueabihf-ld: drivers/gpu/drm/drm_fb_cma_helper.c:46: \
undefined reference to `drm_gem_fb_get_obj'
arm-linux-gnueabihf-ld: drivers/gpu/drm/drm_fb_cma_helper.c:46: \
undefined reference to `drm_gem_fb_get_obj'
arm-linux-gnueabihf-ld: drivers/gpu/drm/drm_fb_cma_helper.o: in \
function `drm_fb_cma_sync_non_coherent': \
drivers/gpu/drm/drm_fb_cma_helper.c:133: undefined reference \
to `drm_atomic_helper_damage_iter_init'
arm-linux-gnueabihf-ld: drivers/gpu/drm/drm_fb_cma_helper.c:135: \
undefined reference to `drm_atomic_helper_damage_iter_next'
Link the CMA framebuffer helpers into the KMS helper library to
fix the problem.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes:
4b2b5e142ff4 ("drm: Move GEM memory managers into modules")
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20211026175700.27664-1-tzimmermann@suse.de
Bjorn Andersson [Mon, 25 Oct 2021 17:09:25 +0000 (10:09 -0700)]
drm/bridge: ti-sn65dsi86: Implement the pwm_chip
The SN65DSI86 provides the ability to supply a PWM signal on GPIO 4,
with the primary purpose of controlling the backlight of the attached
panel. Add an implementation that exposes this using the standard PWM
framework, to allow e.g. pwm-backlight to expose this to the user.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025170925.3096444-3-bjorn.andersson@linaro.org
Bjorn Andersson [Mon, 25 Oct 2021 17:09:24 +0000 (10:09 -0700)]
drm/bridge: ti-sn65dsi86: Use regmap_bulk_write API
The multi-register u16 write operation can use regmap_bulk_write()
instead of two separate regmap_write() calls.
It's uncertain if this has any effect on the actual updates of the
underlying registers, but this at least gives the hardware the
opportunity and saves us one transation on the bus.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025170925.3096444-2-bjorn.andersson@linaro.org
Bjorn Andersson [Mon, 25 Oct 2021 17:09:23 +0000 (10:09 -0700)]
pwm: Introduce single-PWM of_xlate function
The existing pxa driver and the upcoming addition of PWM support in the
TI sn565dsi86 DSI/eDP bridge driver both has a single PWM channel and
thereby a need for a of_xlate function with the period as its single
argument.
Introduce a common helper function in the core that can be used as
of_xlate by such drivers and migrate the pxa driver to use this.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-By: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025170925.3096444-1-bjorn.andersson@linaro.org
Christian König [Mon, 13 Sep 2021 12:20:13 +0000 (14:20 +0200)]
drm/etnaviv: replace dma_resv_get_excl_unlocked
We certainly hold the reservation lock here, no need for the RCU dance.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025080532.177424-3-christian.koenig@amd.com
Christian König [Tue, 15 Jun 2021 16:54:34 +0000 (18:54 +0200)]
drm/etnaviv: use new iterator in etnaviv_gem_describe
Instead of hand rolling the logic.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025080532.177424-2-christian.koenig@amd.com
Arnd Bergmann [Tue, 26 Oct 2021 08:34:37 +0000 (10:34 +0200)]
dma-buf: st: fix error handling in test_get_fences()
The new driver incorrectly unwinds after errors, as clang points out:
drivers/dma-buf/st-dma-resv.c:295:7: error: variable 'i' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (r) {
^
drivers/dma-buf/st-dma-resv.c:336:9: note: uninitialized use occurs here
while (i--)
^
drivers/dma-buf/st-dma-resv.c:295:3: note: remove the 'if' if its condition is always false
if (r) {
^~~~~~~~
drivers/dma-buf/st-dma-resv.c:288:6: error: variable 'i' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (r) {
^
drivers/dma-buf/st-dma-resv.c:336:9: note: uninitialized use occurs here
while (i--)
^
drivers/dma-buf/st-dma-resv.c:288:2: note: remove the 'if' if its condition is always false
if (r) {
^~~~~~~~
drivers/dma-buf/st-dma-resv.c:280:10: note: initialize the variable 'i' to silence this warning
int r, i;
^
= 0
Skip cleaning up the bits that have not been allocated at this point.
Fixes:
1d51775cd3f5 ("dma-buf: add dma_resv selftest v4")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026083448.3471055-1-arnd@kernel.org
Signed-off-by: Christian König <christian.koenig@amd.com>
Yang Li [Tue, 19 Oct 2021 07:37:26 +0000 (15:37 +0800)]
drm/panel: novatek-nt35950: remove unneeded semicolon
Eliminate the following coccicheck warning:
./drivers/gpu/drm/panel/panel-novatek-nt35950.c:639:2-3: Unneeded
semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes:
623a3531e9cf ("drm/panel: Add driver for Novatek NT35950 DSI DriverIC panels")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1634629046-116842-1-git-send-email-yang.lee@linux.alibaba.com
chongjiapeng [Tue, 19 Oct 2021 10:40:29 +0000 (18:40 +0800)]
drm/panel: make sharp_ls055d1sx04 static
This symbol is not used outside of panel-novatek-nt35950.c, so marks it
static.
Fixes the following sparse warning:
drivers/gpu/drm/panel/panel-novatek-nt35950.c:671:33: warning: symbol
'sharp_ls055d1sx04' was not declared. Should it be static?
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes:
623a3531e9cf ("drm/panel: Add driver for Novatek NT35950 DSI DriverIC panels")
Signed-off-by: chongjiapeng <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1634640029-12335-1-git-send-email-jiapeng.chong@linux.alibaba.com
John Keeping [Wed, 20 Oct 2021 15:34:30 +0000 (16:34 +0100)]
drm/panel: ilitek-ili9881c: Read panel orientation
The panel orientation needs to parsed from a device-tree and assigned to
the panel's connector in order to make orientation property available to
userspace. That's what this patch does for ILI9881C based panels.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020153432.383845-4-john@metanate.com
John Keeping [Wed, 20 Oct 2021 15:34:29 +0000 (16:34 +0100)]
dt-bindings: ili9881c: add rotation property
Allow the standard rotation property from panel-common for ILI9881C
based panels.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020153432.383845-3-john@metanate.com
John Keeping [Wed, 20 Oct 2021 15:34:28 +0000 (16:34 +0100)]
dt-bindings: ili9881c: add missing panel-common inheritance
The properties below refer to items in panel-common.yaml, which means
that needs to be referenced in the schema.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020153432.383845-2-john@metanate.com
Maxime Ripard [Thu, 23 Sep 2021 18:50:13 +0000 (20:50 +0200)]
drm/vc4: crtc: Make sure the HDMI controller is powered when disabling
Since commit
875a4d536842 ("drm/vc4: drv: Disable the CRTC at boot
time"), during the initial setup of the driver we call into the VC4 HDMI
controller hooks to make sure the controller is properly disabled.
However, we were never making sure that the device was properly powered
while doing so. This never resulted in any (reported) issue in practice,
but since the introduction of commit
4209f03fcb8e ("drm/vc4: hdmi: Warn
if we access the controller while disabled") we get a loud complaint
when we do that kind of access.
Let's make sure we have the HDMI controller properly powered while
disabling it.
Fixes:
875a4d536842 ("drm/vc4: drv: Disable the CRTC at boot time")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923185013.826679-1-maxime@cerno.tech
Maxime Ripard [Thu, 19 Aug 2021 13:59:31 +0000 (15:59 +0200)]
drm/vc4: hdmi: Warn if we access the controller while disabled
We've had many silent hangs where the kernel would look like it just
stalled due to the access to one of the HDMI registers while the
controller was disabled.
Add a warning if we're about to do that so that it's at least not silent
anymore.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819135931.895976-7-maxime@cerno.tech
Maxime Ripard [Thu, 19 Aug 2021 13:59:30 +0000 (15:59 +0200)]
drm/vc4: hdmi: Make sure the device is powered with CEC
Similarly to what we encountered with the detect hook with DRM, nothing
actually prevents any of the CEC callback from being run while the HDMI
output is disabled.
However, this is an issue since any register access to the controller
when it's powered down will result in a silent hang.
Let's make sure we run the runtime_pm hooks when the CEC adapter is
opened and closed by the userspace to avoid that issue.
Fixes:
15b4511a4af6 ("drm/vc4: add HDMI CEC support")
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819135931.895976-6-maxime@cerno.tech
Maxime Ripard [Thu, 19 Aug 2021 13:59:29 +0000 (15:59 +0200)]
drm/vc4: hdmi: Split the CEC disable / enable functions in two
In order to ease further additions to the CEC enable and disable, let's
split the function into two functions, one to enable and the other to
disable.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819135931.895976-5-maxime@cerno.tech
Maxime Ripard [Thu, 19 Aug 2021 13:59:28 +0000 (15:59 +0200)]
drm/vc4: hdmi: Rework the pre_crtc_configure error handling
Since our pre_crtc_configure hook returned void, we didn't implement a
goto-based error path handling, leading to errors like failing to put
back the device in pm_runtime in all the error paths, but also failing
to disable the pixel clock if clk_set_min_rate on the HSM clock fails.
Move to a goto-based implementation to have an easier consitency.
Fixes:
4f6e3d66ac52 ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Link: https://patchwork.freedesktop.org/patch/msgid/20210819135931.895976-4-maxime@cerno.tech
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Maxime Ripard [Thu, 19 Aug 2021 13:59:27 +0000 (15:59 +0200)]
drm/vc4: hdmi: Make sure the controller is powered up during bind
In the bind hook, we actually need the device to have the HSM clock
running during the final part of the display initialisation where we
reset the controller and initialise the CEC component.
Failing to do so will result in a complete, silent, hang of the CPU.
Fixes:
411efa18e4b0 ("drm/vc4: hdmi: Move the HSM clock enable to runtime_pm")
Link: https://patchwork.freedesktop.org/patch/msgid/20210819135931.895976-3-maxime@cerno.tech
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Maxime Ripard [Wed, 22 Sep 2021 12:54:19 +0000 (14:54 +0200)]
drm/vc4: hdmi: Make sure the controller is powered in detect
If the HPD GPIO is not available and drm_probe_ddc fails, we end up
reading the HDMI_HOTPLUG register, but the controller might be powered
off resulting in a CPU hang. Make sure we have the power domain and the
HSM clock powered during the detect cycle to prevent the hang from
happening.
Fixes:
4f6e3d66ac52 ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-6-maxime@cerno.tech
Maxime Ripard [Wed, 22 Sep 2021 12:54:18 +0000 (14:54 +0200)]
drm/vc4: hdmi: Move the HSM clock enable to runtime_pm
In order to access the HDMI controller, we need to make sure the HSM
clock is enabled. If we were to access it with the clock disabled, the
CPU would completely hang, resulting in an hard crash.
Since we have different code path that would require it, let's move that
clock enable / disable to runtime_pm that will take care of the
reference counting for us.
Since we also want to change the HSM clock rate and it's only valid
while the clock is disabled, we need to move the clk_set_min_rate() call
on the HSM clock above pm_runtime_get_and_sync().
Fixes:
4f6e3d66ac52 ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-5-maxime@cerno.tech
Link: https://lore.kernel.org/linux-arm-kernel/20210924152334.1342630-1-maxime@cerno.tech/
Maxime Ripard [Wed, 22 Sep 2021 12:54:17 +0000 (14:54 +0200)]
drm/vc4: hdmi: Set a default HSM rate
When the firmware doesn't setup the HSM rate (such as when booting
without an HDMI cable plugged in), its rate is 0 and thus any register
access results in a CPU stall, even though HSM is enabled.
Let's enforce a minimum rate at boot to avoid this issue.
Fixes:
4f6e3d66ac52 ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-4-maxime@cerno.tech
Maxime Ripard [Wed, 22 Sep 2021 12:54:16 +0000 (14:54 +0200)]
clk: bcm-2835: Remove rounding up the dividers
The driver, once it found a divider, tries to round it up by increasing
the least significant bit of the fractional part by one when the
round_up argument is set and there's a remainder.
However, since it increases the divider it will actually reduce the
clock rate below what we were asking for, leading to issues with
clk_set_min_rate() that will complain that our rounded clock rate is
below the minimum of the rate.
Since the dividers are fairly precise already, let's remove that part so
that we can have clk_set_min_rate() working.
This is effectively a revert of
9c95b32ca093 ("clk: bcm2835: add a round
up ability to the clock divisor").
Fixes:
9c95b32ca093 ("clk: bcm2835: add a round up ability to the clock divisor")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org> # boot and basic functionality
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-3-maxime@cerno.tech
Maxime Ripard [Wed, 22 Sep 2021 12:54:15 +0000 (14:54 +0200)]
clk: bcm-2835: Pick the closest clock rate
The driver currently tries to pick the closest rate that is lower than
the rate being requested.
This causes an issue with clk_set_min_rate() since it actively checks
for the rounded rate to be above the minimum that was just set.
Let's change the logic a bit to pick the closest rate to the requested
rate, no matter if it's actually higher or lower.
Fixes:
6d18b8adbe67 ("clk: bcm2835: Support for clock parent selection")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org> # boot and basic functionality
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-2-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 13:27:56 +0000 (15:27 +0200)]
Merge drm/drm-next into drm-misc-next
drm-misc-next hasn't been updated in a while and I need a post -rc2
state to merge some vc4 patches.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Christian König [Mon, 13 Sep 2021 11:47:53 +0000 (13:47 +0200)]
drm: use new iterator in drm_gem_plane_helper_prepare_fb v3
Makes the handling a bit more complex, but avoids the use of
dma_resv_get_excl_unlocked().
v2: improve coding and documentation
v3: adjust the TODO comment as suggested by Daniel
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-25-christian.koenig@amd.com
Thomas Zimmermann [Wed, 20 Oct 2021 13:19:41 +0000 (15:19 +0200)]
drm: Move GEM memory managers into modules
DRM core uses the GEM base object to access GEM functionality. It does
not depend on individual implementations. Move the code into modules.
Also move the CMA framebuffer helpers into the CMA's module, as they're
not usable without CMA.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020131941.15367-4-tzimmermann@suse.de
Thomas Zimmermann [Wed, 20 Oct 2021 13:19:40 +0000 (15:19 +0200)]
drm: Link several object files into drm_kms_helper.ko
Several core DRM functions are not used by the DRM core. Link the
object files into the KMS helper library.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020131941.15367-3-tzimmermann@suse.de
Thomas Zimmermann [Wed, 20 Oct 2021 13:19:39 +0000 (15:19 +0200)]
drm: Build drm_irq.o only if CONFIG_DRM_LEGACY has been set
All code in drm_irq.o is for legacy UMs drivers. Only build and link
the file if CONFIG_DRM_LEGACY has been enabled.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020131941.15367-2-tzimmermann@suse.de
Christian König [Tue, 15 Jun 2021 18:30:10 +0000 (20:30 +0200)]
drm/amdgpu: use new iterator in amdgpu_ttm_bo_eviction_valuable
Simplifying the code a bit.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-13-christian.koenig@amd.com
Christian König [Tue, 15 Jun 2021 18:26:00 +0000 (20:26 +0200)]
drm/amdgpu: use the new iterator in amdgpu_sync_resv
Simplifying the code a bit.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-12-christian.koenig@amd.com
Christian König [Fri, 24 Sep 2021 15:10:19 +0000 (17:10 +0200)]
dma-buf: add dma_resv selftest v4
Just exercising a very minor subset of the functionality, but already
proven useful.
v2: add missing locking
v3: some more cleanup and consolidation, add unlocked test as well
v4: add a dma_resv_get_fences selftest
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v3)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v3)
Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-4-christian.koenig@amd.com
Christian König [Wed, 16 Jun 2021 07:20:56 +0000 (09:20 +0200)]
drm/nouveau: use the new iterator in nouveau_fence_sync
Simplifying the code a bit.
The new implementation unifies the handling between drivers and so
results in waiting for all shared fernces in all cases.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-26-christian.koenig@amd.com
Christian König [Thu, 21 Oct 2021 06:55:24 +0000 (08:55 +0200)]
dma-buf: fix kerneldoc for renamed members
Those members where renamed, update the kerneldoc as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211021141945.84023-1-christian.koenig@amd.com
Dave Airlie [Thu, 21 Oct 2021 20:30:33 +0000 (06:30 +1000)]
Merge tag 'drm-intel-gt-next-2021-10-21' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- Expose multi-LRC submission interface
Similar to the bonded submission interface but simplified.
Comes with GuC only implementation for now. See kerneldoc
for more details.
Userspace changes: https://github.com/intel/media-driver/pull/1252
- Expose logical engine instance to user
Needed by the multi-LRC submission interface for GuC
Userspace changes: https://github.com/intel/media-driver/pull/1252
Driver Changes:
- Fix blank screen booting crashes when CONFIG_CC_OPTIMIZE_FOR_SIZE=y (Hugh)
- Add support for multi-LRC submission in the GuC backend (Matt B)
- Add extra cache flushing before making pages userspace visible (Matt A, Thomas)
- Mark internal GPU object pages dirty so they will be flushed properly (Matt A)
- Move remaining debugfs interfaces i915_wedged/i915_forcewake_user into gt (Andi)
- Replace the unconditional clflushes with drm_clflush_virt_range() (Ville)
- Remove IS_ACTIVE macro completely (Lucas)
- Improve kerneldocs for cache_dirty (Matt A)
- Add missing includes (Lucas)
- Selftest improvements (Matt R, Ran, Matt A)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YXFmLKoq8Fg9JxSd@jlahtine-mobl.ger.corp.intel.com
Dave Airlie [Thu, 21 Oct 2021 19:49:21 +0000 (05:49 +1000)]
Merge tag 'drm-intel-next-2021-10-15' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- No Functional change, but a clarification around I915_TILING values (Matt).
Driver Changes:
- Changes around async flip VT-d w/a (Ville)
- Delete bogus NULL check in intel_ddi_encoder_destroy (Dan)
- DP link training improvements and DP per-lane driver settings (Ville)
- Free the returned object of acpi_evaluate_dsm (Zenghui)
- Fixes and improvements around DP's UHBR and MST (Jani)
- refactor plane config + pin out (Dave)
- remove unused include in intel_dsi_vbt.c (Lucas)
- some code clean up (Lucas, Jani)
- gracefully disable dual eDP (Jani)
- Remove memory frequency calculation (Jose)
- Fix oops on platforms w/o hpd support (Ville)
- Clean up PXP Kconfig info (Rodrigo)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YWnMORrixyw90O3/@intel.com
Thomas Zimmermann [Thu, 24 Jun 2021 09:55:02 +0000 (11:55 +0200)]
drm/rockchip: Implement mmap as GEM object function
Moving the driver-specific mmap code into a GEM object function allows
for using DRM helpers for various mmap callbacks.
The respective rockchip functions are being removed. The file_operations
structure fops is now being created by the helper macro
DEFINE_DRM_GEM_FOPS().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
[On rk3288 (pinky), rk3399 (gru-kevin, puma) and rk3328 (rock64)]
Tested-by: Heiko Stuebner <heiko@sntech.de>
[On RK3188/RK3066 (without iommu)]
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624095502.8945-1-tzimmermann@suse.de
Jernej Skrabec [Tue, 19 Oct 2021 18:10:28 +0000 (20:10 +0200)]
drm/sun4i: virtual CMA addresses are not needed
Driver never uses virtual address of DRM CMA buffers. Switch to CMA
helpers which don't deal with virtual mapping.
This was actually already the case before commit
ad408c766cef
("drm/sun4i: Use DRM_GEM_CMA_VMAP_DRIVER_OPS for GEM operations"),
but only convenient macro at the time used helpers with virtual
mapping.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019181028.4190737-1-jernej.skrabec@gmail.com