OSDN Git Service
Jan Engelhardt [Thu, 9 Jul 2009 17:14:18 +0000 (19:14 +0200)]
netfilter: xtables: dissolve do_match function
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Jan Engelhardt [Sun, 2 May 2010 12:04:54 +0000 (14:04 +0200)]
netfilter: xtables: fix incorrect return code
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Jan Engelhardt [Sun, 2 May 2010 11:55:21 +0000 (13:55 +0200)]
netfilter: ip_tables: fix compilation when debug is enabled
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Jan Engelhardt [Tue, 27 Apr 2010 13:34:34 +0000 (15:34 +0200)]
netfilter: x_tables: rectify XT_FUNCTION_MAXNAMELEN usage
There has been quite a confusion in userspace about
XT_FUNCTION_MAXNAMELEN; because struct xt_entry_match used MAX-1,
userspace would have to do an awkward MAX-2 for maximum length
checking (due to '\0'). This patch adds a new define that matches the
definition of XT_TABLE_MAXNAMELEN - being the size of the actual
struct member, not one off.
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Jesper Dangaard Brouer [Fri, 23 Apr 2010 10:34:56 +0000 (12:34 +0200)]
netfilter: nf_conntrack: extend with extra stat counter
I suspect an unfortunatly series of events occuring under a DDoS
attack, in function __nf_conntrack_find() nf_contrack_core.c.
Adding a stats counter to see if the search is restarted too often.
Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Patrick McHardy [Thu, 22 Apr 2010 11:03:24 +0000 (13:03 +0200)]
netfilter: ip_tables: convert pr_devel() to pr_debug()
We want to be able to use CONFIG_DYNAMIC_DEBUG in netfilter code, switch
the few existing pr_devel() calls to pr_debug().
Signed-off-by: Patrick McHardy <kaber@trash.net>
Jan Engelhardt [Wed, 21 Apr 2010 12:45:51 +0000 (14:45 +0200)]
netfilter: x_tables: move sleeping allocation outside BH-disabled region
The jumpstack allocation needs to be moved out of the critical region.
Corrects this notice:
BUG: sleeping function called from invalid context at mm/slub.c:1705
[ 428.295762] in_atomic(): 1, irqs_disabled(): 0, pid: 9111, name: iptables
[ 428.295771] Pid: 9111, comm: iptables Not tainted 2.6.34-rc1 #2
[ 428.295776] Call Trace:
[ 428.295791] [<
c012138e>] __might_sleep+0xe5/0xed
[ 428.295801] [<
c019e8ca>] __kmalloc+0x92/0xfc
[ 428.295825] [<
f865b3bb>] ? xt_jumpstack_alloc+0x36/0xff [x_tables]
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Bart De Schuymer [Tue, 20 Apr 2010 14:22:01 +0000 (16:22 +0200)]
netfilter: bridge-netfilter: fix refragmenting IP traffic encapsulated in PPPoE traffic
The MTU for IP traffic encapsulated inside PPPoE traffic is smaller
than the MTU of the Ethernet device (1500). Connection tracking
gathers all IP packets and sometimes will refragment them in
ip_fragment(). We then need to subtract the length of the
encapsulating header from the mtu used in ip_fragment(). The check in
br_nf_dev_queue_xmit() which determines if ip_fragment() has to be
called is also updated for the PPPoE-encapsulated packets.
nf_bridge_copy_header() is also updated to make sure the PPPoE data
length field has the correct value.
Signed-off-by: Bart De Schuymer <bdschuym@pandora.be>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Patrick McHardy [Tue, 20 Apr 2010 14:02:01 +0000 (16:02 +0200)]
Merge branch 'master' of /repos/git/net-next-2.6
Conflicts:
Documentation/feature-removal-schedule.txt
net/ipv6/netfilter/ip6t_REJECT.c
net/netfilter/xt_limit.c
Signed-off-by: Patrick McHardy <kaber@trash.net>
Patrick McHardy [Tue, 20 Apr 2010 13:07:32 +0000 (15:07 +0200)]
netfilter: xt_TEE: resolve oif using netdevice notifiers
Replace the runtime oif name resolving by netdevice notifier based
resolving. When an oif is given, a netdevice notifier is registered
to resolve the name on NETDEV_REGISTER or NETDEV_CHANGE and unresolve
it again on NETDEV_UNREGISTER or NETDEV_CHANGE to a different name.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Jiri Pirko [Tue, 20 Apr 2010 08:45:37 +0000 (01:45 -0700)]
net: emphasize rtnl lock required in call_netdevice_notifiers
Since netdev_chain is guarded by rtnl_lock, ASSERT_RTNL should be
present here to make sure that all callers of call_netdevice_notifiers
does the locking properly.
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 19 Apr 2010 21:56:38 +0000 (21:56 +0000)]
rps: consistent rxhash
In case we compute a software skb->rxhash, we can generate a consistent
hash : Its value will be the same in both flow directions.
This helps some workloads, like conntracking, since the same state needs
to be accessed in both directions.
tbench + RFS + this patch gives better results than tbench with default
kernel configuration (no RPS, no RFS)
Also fixed some sparse warnings.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 19 Apr 2010 21:17:14 +0000 (21:17 +0000)]
rps: cleanups
struct softnet_data holds many queues, so consistent use "sd" name
instead of "queue" is better.
Adds a rps_ipi_queued() helper to cleanup enqueue_to_backlog()
Adds a _and_irq_disable suffix to net_rps_action() name, as David
suggested.
incr_input_queue_head() becomes input_queue_head_incr()
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 19 Apr 2010 21:40:57 +0000 (14:40 -0700)]
rps: static functions
store_rps_map() & store_rps_dev_flow_table_cnt() are static.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 19 Apr 2010 05:07:33 +0000 (05:07 +0000)]
rps: shortcut net_rps_action()
net_rps_action() is a bit expensive on NR_CPUS=64..4096 kernels, even if
RPS is not active.
Tom Herbert used two bitmasks to hold information needed to send IPI,
but a single LIFO list seems more appropriate.
Move all RPS logic into net_rps_action() to cleanup net_rx_action() code
(remove two ifdefs)
Move rps_remote_softirq_cpus into softnet_data to share its first cache
line, filling an existing hole.
In a future patch, we could call net_rps_action() from process_backlog()
to make sure we send IPI before handling this cpu backlog.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladislav Zolotarov [Mon, 19 Apr 2010 01:15:17 +0000 (01:15 +0000)]
bnx2x: Date and version
Set version to 1.52.53-1.
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladislav Zolotarov [Mon, 19 Apr 2010 01:15:08 +0000 (01:15 +0000)]
bnx2x: Don't report link down if has been already down
Author: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladislav Zolotarov [Mon, 19 Apr 2010 01:14:49 +0000 (01:14 +0000)]
bnx2x: Rework power state handling code
Move "don't shut down the power" logic into bnx2x_set_power_state() to make the code cleaner.
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladislav Zolotarov [Mon, 19 Apr 2010 01:14:37 +0000 (01:14 +0000)]
bnx2x: use mask in test_registers() to avoid parity error
Properly mask the value to be written to the register (according to the register size) during the self-test.
Otherwise immediate parity error would be generated.
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladislav Zolotarov [Mon, 19 Apr 2010 01:14:18 +0000 (01:14 +0000)]
bnx2x: Fixed MSI-X enabling flow
Try to enable less MSI-X vectors if initial request has failed.
Author: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladislav Zolotarov [Mon, 19 Apr 2010 01:14:07 +0000 (01:14 +0000)]
bnx2x: Added new statistics
Added total_mcast/bcast_pkts_transmitted statistics.
Author: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladislav Zolotarov [Mon, 19 Apr 2010 01:13:57 +0000 (01:13 +0000)]
bnx2x: White spaces
White spaces, code readability and prints.
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladislav Zolotarov [Mon, 19 Apr 2010 01:13:49 +0000 (01:13 +0000)]
bnx2x: Protect code with NOMCP
Don't run code that can't be run if MCP is not present.
This will prevent NULL pointer dereferencing.
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladislav Zolotarov [Mon, 19 Apr 2010 01:13:33 +0000 (01:13 +0000)]
bnx2x: Increase DMAE max write size for 57711
Increase DMAE max write size for 57711 to the maximum allowed value.
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladislav Zolotarov [Mon, 19 Apr 2010 01:13:23 +0000 (01:13 +0000)]
bnx2x: Use VPD-R V0 entry to display firmware revision
Author: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladislav Zolotarov [Mon, 19 Apr 2010 01:13:12 +0000 (01:13 +0000)]
bnx2x: Parity errors handling for 57710 and 57711
This patch introduces the parity errors handling code for 57710 and 57711 chips.
HW is configured to stop all DMA transactions to the host and sending packets to the network
once parity error is detected, which is meant to prevent silent data corruption.
At the same time HW generates the attention interrupt to every function of the device where parity
has been detected so that driver can start the recovery flow.
The recovery is actually resetting the chip and restarting the driver on all active functions
of the chip where the parity error has been reported.
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jan Engelhardt [Mon, 19 Apr 2010 14:07:47 +0000 (16:07 +0200)]
netfilter: xtables: remove old comments about reentrancy
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Jan Engelhardt [Mon, 19 Apr 2010 14:06:52 +0000 (16:06 +0200)]
netfilter: xt_TEE: have cloned packet travel through Xtables too
Since Xtables is now reentrant/nestable, the cloned packet can also go
through Xtables and be subject to rules itself.
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Jan Engelhardt [Mon, 19 Apr 2010 14:05:10 +0000 (16:05 +0200)]
netfilter: xtables: make ip_tables reentrant
Currently, the table traverser stores return addresses in the ruleset
itself (struct ip6t_entry->comefrom). This has a well-known drawback:
the jumpstack is overwritten on reentry, making it necessary for
targets to return absolute verdicts. Also, the ruleset (which might
be heavy memory-wise) needs to be replicated for each CPU that can
possibly invoke ip6t_do_table.
This patch decouples the jumpstack from struct ip6t_entry and instead
puts it into xt_table_info. Not being restricted by 'comefrom'
anymore, we can set up a stack as needed. By default, there is room
allocated for two entries into the traverser.
arp_tables is not touched though, because there is just one/two
modules and further patches seek to collapse the table traverser
anyhow.
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Jan Engelhardt [Mon, 19 Apr 2010 12:17:47 +0000 (14:17 +0200)]
netfilter: xtables: inclusion of xt_TEE
xt_TEE can be used to clone and reroute a packet. This can for
example be used to copy traffic at a router for logging purposes
to another dedicated machine.
References: http://www.gossamer-threads.com/lists/iptables/devel/68781
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Eric Dumazet [Fri, 16 Apr 2010 12:18:22 +0000 (12:18 +0000)]
net: Introduce skb_orphan_try()
Transmitted skb might be attached to a socket and a destructor, for
memory accounting purposes.
Traditionally, this destructor is called at tx completion time, when skb
is freed.
When tx completion is performed by another cpu than the sender, this
forces some cache lines to change ownership. XPS was an attempt to give
tx completion to initial cpu.
David idea is to call destructor right before giving skb to device (call
to ndo_start_xmit()). Because device queues are usually small, orphaning
skb before tx completion is not a big deal. Some drivers already do
this, we could do it in upper level.
There is one known exception to this early orphaning, called tx
timestamping. It needs to keep a reference to socket until device can
give a hardware or software timestamp.
This patch adds a skb_orphan_try() helper, to centralize all exceptions
to early orphaning in one spot, and use it in dev_hard_start_xmit().
"tbench 16" results on a Nehalem machine (2 X5570 @ 2.93GHz)
before: Throughput 4428.9 MB/sec 16 procs
after: Throughput 4448.14 MB/sec 16 procs
UDP should get even better results, its destructor being more complex,
since SOCK_USE_WRITE_QUEUE is not set (four atomic ops instead of one)
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sat, 17 Apr 2010 04:17:02 +0000 (04:17 +0000)]
net: remove time limit in process_backlog()
- There is no point to enforce a time limit in process_backlog(), since
other napi instances dont follow same rule. We can exit after only one
packet processed...
The normal quota of 64 packets per napi instance should be the norm, and
net_rx_action() already has its own time limit.
Note : /proc/net/core/dev_weight can be used to tune this 64 default
value.
- Use DEFINE_PER_CPU_ALIGNED for softnet_data definition.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sat, 17 Apr 2010 07:54:36 +0000 (00:54 -0700)]
rps: rps_sock_flow_table is mostly read
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Fri, 16 Apr 2010 23:01:27 +0000 (16:01 -0700)]
rfs: Receive Flow Steering
This patch implements receive flow steering (RFS). RFS steers
received packets for layer 3 and 4 processing to the CPU where
the application for the corresponding flow is running. RFS is an
extension of Receive Packet Steering (RPS).
The basic idea of RFS is that when an application calls recvmsg
(or sendmsg) the application's running CPU is stored in a hash
table that is indexed by the connection's rxhash which is stored in
the socket structure. The rxhash is passed in skb's received on
the connection from netif_receive_skb. For each received packet,
the associated rxhash is used to look up the CPU in the hash table,
if a valid CPU is set then the packet is steered to that CPU using
the RPS mechanisms.
The convolution of the simple approach is that it would potentially
allow OOO packets. If threads are thrashing around CPUs or multiple
threads are trying to read from the same sockets, a quickly changing
CPU value in the hash table could cause rampant OOO packets--
we consider this a non-starter.
To avoid OOO packets, this solution implements two types of hash
tables: rps_sock_flow_table and rps_dev_flow_table.
rps_sock_table is a global hash table. Each entry is just a CPU
number and it is populated in recvmsg and sendmsg as described above.
This table contains the "desired" CPUs for flows.
rps_dev_flow_table is specific to each device queue. Each entry
contains a CPU and a tail queue counter. The CPU is the "current"
CPU for a matching flow. The tail queue counter holds the value
of a tail queue counter for the associated CPU's backlog queue at
the time of last enqueue for a flow matching the entry.
Each backlog queue has a queue head counter which is incremented
on dequeue, and so a queue tail counter is computed as queue head
count + queue length. When a packet is enqueued on a backlog queue,
the current value of the queue tail counter is saved in the hash
entry of the rps_dev_flow_table.
And now the trick: when selecting the CPU for RPS (get_rps_cpu)
the rps_sock_flow table and the rps_dev_flow table for the RX queue
are consulted. When the desired CPU for the flow (found in the
rps_sock_flow table) does not match the current CPU (found in the
rps_dev_flow table), the current CPU is changed to the desired CPU
if one of the following is true:
- The current CPU is unset (equal to RPS_NO_CPU)
- Current CPU is offline
- The current CPU's queue head counter >= queue tail counter in the
rps_dev_flow table. This checks if the queue tail has advanced
beyond the last packet that was enqueued using this table entry.
This guarantees that all packets queued using this entry have been
dequeued, thus preserving in order delivery.
Making each queue have its own rps_dev_flow table has two advantages:
1) the tail queue counters will be written on each receive, so
keeping the table local to interrupting CPU s good for locality. 2)
this allows lockless access to the table-- the CPU number and queue
tail counter need to be accessed together under mutual exclusion
from netif_receive_skb, we assume that this is only called from
device napi_poll which is non-reentrant.
This patch implements RFS for TCP and connected UDP sockets.
It should be usable for other flow oriented protocols.
There are two configuration parameters for RFS. The
"rps_flow_entries" kernel init parameter sets the number of
entries in the rps_sock_flow_table, the per rxqueue sysfs entry
"rps_flow_cnt" contains the number of entries in the rps_dev_flow
table for the rxqueue. Both are rounded to power of two.
The obvious benefit of RFS (over just RPS) is that it achieves
CPU locality between the receive processing for a flow and the
applications processing; this can result in increased performance
(higher pps, lower latency).
The benefits of RFS are dependent on cache hierarchy, application
load, and other factors. On simple benchmarks, we don't necessarily
see improvement and sometimes see degradation. However, for more
complex benchmarks and for applications where cache pressure is
much higher this technique seems to perform very well.
Below are some benchmark results which show the potential benfit of
this patch. The netperf test has 500 instances of netperf TCP_RR
test with 1 byte req. and resp. The RPC test is an request/response
test similar in structure to netperf RR test ith 100 threads on
each host, but does more work in userspace that netperf.
e1000e on 8 core Intel
No RFS or RPS 104K tps at 30% CPU
No RFS (best RPS config): 290K tps at 63% CPU
RFS 303K tps at 61% CPU
RPC test tps CPU% 50/90/99% usec latency Latency StdDev
No RFS/RPS 103K 48% 757/900/3185 4472.35
RPS only: 174K 73% 415/993/2468 491.66
RFS 223K 73% 379/651/1382 315.61
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shan Wei [Thu, 15 Apr 2010 16:48:48 +0000 (16:48 +0000)]
ipv6: fix the comment of ip6_xmit()
ip6_xmit() is used by upper transport protocol.
Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shan Wei [Thu, 15 Apr 2010 16:43:08 +0000 (16:43 +0000)]
net: replace ipfragok with skb->local_df
As Herbert Xu said: we should be able to simply replace ipfragok
with skb->local_df. commit f88037(sctp: Drop ipfargok in sctp_xmit function)
has droped ipfragok and set local_df value properly.
The patch kills the ipfragok parameter of .queue_xmit().
Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shan Wei [Thu, 15 Apr 2010 16:39:14 +0000 (16:39 +0000)]
ipv6: cancel to setting local_df in ip6_xmit()
commit f88037(sctp: Drop ipfargok in sctp_xmit function)
has droped ipfragok and set local_df value properly.
So the change of commit 77e2f1(ipv6: Fix ip6_xmit to
send fragments if ipfragok is true) is not needed.
So the patch remove them.
Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Thu, 15 Apr 2010 22:37:13 +0000 (15:37 -0700)]
net/l2tp/l2tp_debugfs.c: Convert NIPQUAD to %pI4
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 15 Apr 2010 21:31:06 +0000 (14:31 -0700)]
Merge branch 'for-davem' of git://git./linux/kernel/git/linville/wireless-next-2.6
David S. Miller [Thu, 15 Apr 2010 21:14:05 +0000 (14:14 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/kaber/ipmr-2.6
John W. Linville [Thu, 15 Apr 2010 20:21:34 +0000 (16:21 -0400)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-next-2.6 into for-davem
Conflicts:
Documentation/feature-removal-schedule.txt
drivers/net/wireless/ath/ath5k/phy.c
drivers/net/wireless/wl12xx/wl1271_main.c
Patrick McHardy [Thu, 15 Apr 2010 17:09:01 +0000 (19:09 +0200)]
netfilter: ipt_LOG/ip6t_LOG: use more appropriate log level as default
Use KERN_NOTICE instead of KERN_EMERG by default. This only affects
kernel internal logging (like conntrack), user-specified logging rules
contain a seperate log level.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Patrick McHardy [Thu, 15 Apr 2010 11:29:28 +0000 (13:29 +0200)]
ipv4: ipmr: fix NULL pointer deref during unres queue destruction
Fix an oversight in ipmr_destroy_unres() - the net pointer is
unconditionally initialized to NULL, resulting in a NULL pointer
dereference later on.
Fix by adding a net pointer to struct mr_table and using it in
ipmr_destroy_unres().
Signed-off-by: Patrick McHardy <kaber@trash.net>
Patrick McHardy [Thu, 15 Apr 2010 11:29:28 +0000 (13:29 +0200)]
ipv4: ipmr: fix invalid cache resolving when adding a non-matching entry
The patch to convert struct mfc_cache to list_heads (ipv4: ipmr: convert
struct mfc_cache to struct list_head) introduced a bug when adding new
cache entries that don't match any unresolved entries.
The unres queue is searched for a matching entry, which is then resolved.
When no matching entry is present, the iterator points to the head of the
list, but is treated as a matching entry. Use a seperate variable to
indicate that a matching entry was found.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Patrick McHardy [Thu, 15 Apr 2010 11:29:27 +0000 (13:29 +0200)]
ipv4: ipmr: fix IP_MROUTE_MULTIPLE_TABLES Kconfig dependencies
IP_MROUTE_MULTIPLE_TABLES should depend on IP_MROUTE.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Ulrich Weber [Thu, 15 Apr 2010 10:37:18 +0000 (12:37 +0200)]
netfilter: ipv6: move xfrm_lookup at end of ip6_route_me_harder
xfrm_lookup should be called after ip6_route_output skb_dst_set,
otherwise skb_dst_set of xfrm_lookup is pointless
Signed-off-by: Ulrich Weber <uweber@astaro.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Bart De Schuymer [Thu, 15 Apr 2010 10:26:39 +0000 (12:26 +0200)]
netfilter: bridge-netfilter: Fix MAC header handling with IP DNAT
- fix IP DNAT on vlan- or pppoe-encapsulated traffic: The functions
neigh_hh_output() or dst->neighbour->output() overwrite the complete
Ethernet header, although we only need the destination MAC address.
For encapsulated packets, they ended up overwriting the encapsulating
header. The new code copies the Ethernet source MAC address and
protocol number before calling dst->neighbour->output(). The Ethernet
source MAC and protocol number are copied back in place in
br_nf_pre_routing_finish_bridge_slow(). This also makes the IP DNAT
more transparent because in the old scheme the source MAC of the
bridge was copied into the source address in the Ethernet header. We
also let skb->protocol equal ETH_P_IP resp. ETH_P_IPV6 during the
execution of the PF_INET resp. PF_INET6 hooks.
- Speed up IP DNAT by calling neigh_hh_bridge() instead of
neigh_hh_output(): if dst->hh is available, we already know the MAC
address so we can just copy it.
Signed-off-by: Bart De Schuymer <bdschuym@pandora.be>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Bart De Schuymer [Thu, 15 Apr 2010 10:14:51 +0000 (12:14 +0200)]
netfilter: bridge-netfilter: simplify IP DNAT
Remove br_netfilter.c::br_nf_local_out(). The function
br_nf_local_out() was needed because the PF_BRIDGE::LOCAL_OUT hook
could be called when IP DNAT happens on to-be-bridged traffic. The
new scheme eliminates this mess.
Signed-off-by: Bart De Schuymer <bdschuym@pandora.be>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Changli Gao [Thu, 15 Apr 2010 07:16:59 +0000 (00:16 -0700)]
net: CONFIG_SMP should be CONFIG_RPS
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 15 Apr 2010 07:14:07 +0000 (00:14 -0700)]
net: netif_rx() must disable preemption
Eric Paris reported netif_rx() is calling smp_processor_id() from
preemptible context, in particular when caller is
ip_dev_loopback_xmit().
RPS commit added this smp_processor_id() call, this patch makes sure
preemption is disabled. rps_get_cpus() wants rcu_read_lock() anyway, we
can dot it a bit earlier.
Reported-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 15 Apr 2010 05:52:46 +0000 (22:52 -0700)]
Merge branch 'vhost' of git://git./linux/kernel/git/mst/vhost
Jesse Brandeburg [Wed, 14 Apr 2010 23:04:23 +0000 (16:04 -0700)]
ixgbe: fix bug with vlan strip in promsic mode
The ixgbe driver was setting up 82598 hardware correctly, so that
when promiscuous mode was enabled hardware stripping was turned
off. But on 82599 the logic to disable/enable hardware stripping
is different, and the code was not updated correctly when the
hardware vlan stripping was enabled as default.
This change comprises the creation of two new helper functions
and calling them from the right locations to disable and enable
hardware stripping of vlan tags at appropriate times.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 14 Apr 2010 22:59:40 +0000 (15:59 -0700)]
drivers: net: use skb_headlen()
replaces (skb->len - skb->data_len) occurrences by skb_headlen(skb)
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xose Vazquez Perez [Wed, 14 Apr 2010 10:16:00 +0000 (12:16 +0200)]
wireless: rt2x00: rt2800usb: identify Sitecom devices
A very useful information was provided by Sitecom R&D guys:
Please find the information regarding our latest Ralink adapters below;
WL-302 - VID: 0x0DF6, PID: 0x002D - Ralink RT2771
WL-315 - VID: 0x0DF6, PID: 0x0039 - Ralink RT2770
WL-319 - VID: 0x182D, PID: 0x0037 - Ralink RT2860
WL-321 - VID: 0x0DF6, PID: 0x003B - Ralink RT2770
WL-324 - VID: 0x0DF6, PID: 0x003D - Ralink RT2870
WL-329 - VID: 0x0DF6, PID: 0x0041 - Ralink RT3572
WL-343 - VID: 0x0DF6, PID: 0x003E - Ralink RT3070
WL-344 - VID: 0x0DF6, PID: 0x0040 - Ralink RT3071
WL-345 - VID: 0x0DF6, PID: 0x0042 - Ralink RT3072
WL-608 - VID: 0x0DF6, PID: 0x003F - Ralink RT2070
Note:
PID: 0x003C, 0x004A, and 0x004D: --these products do not exist; devices were never produced/shipped--
The WL-349v4 USB dongle (0x0df6,0x0050) will be shipped soon (it isn't available yet), and uses a Ralink RT3370 chipset.
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Christian Lamparter [Tue, 13 Apr 2010 16:10:26 +0000 (18:10 +0200)]
ar9170usb: add a couple more USB IDs
This patch adds the following 5 entries to the usbid device table:
* Netgear WNA1000
* Proxim ORiNOCO Dual Band 802.11n USB Adapter
* 3Com Dual Band 802.11n USB Adapter
* H3C Dual Band 802.11n USB Adapter
* WNC Generic 11n USB dongle
CC: <stable@kernel.org>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Grazvydas Ignotas [Mon, 12 Apr 2010 22:21:40 +0000 (01:21 +0300)]
wl1251: don't require NVS data when EEPROM is used
If EEPROM is used, NVS data is now loaded but ignored.
Stop loading it to avoid need of dummy NVS file for modules with EEPROM.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Kalle Valo <kvalo@adurom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ming Lei [Mon, 12 Apr 2010 16:29:27 +0000 (00:29 +0800)]
ath9k-htc: fix lockdep warning and kernel warning after unplugging ar9271 usb device
This patch fixes two warnings below after unplugging ar9271 usb device:
-one is a kernel warning[1]
-another is a lockdep warning[2]
The root reason is that __skb_queue_purge can't be executed in hardirq
context, so the patch forks ath9k_skb_queue_purge(ath9k version of _skb_queue_purge),
which frees skb with dev_kfree_skb_any which can be run in hardirq
context safely, then prevent the lockdep warning and kernel warning after
unplugging ar9271 usb device.
[1] kernel warning
[ 602.894005] ------------[ cut here ]------------
[ 602.894005] WARNING: at net/core/skbuff.c:398 skb_release_head_state+0x71/0x87()
[ 602.894005] Hardware name: 6475EK2
[ 602.894005] Modules linked in: ath9k_htc ath9k ath9k_common ath9k_hw ath bridge stp llc sunrpc ipv6 cpufreq_ondemand acpi_cpufreq freq_table kvm_intel kvm arc4 ecb mac80211 snd_hda_codec_conexant snd_hda_intel snd_hda_codec snd_hwdep thinkpad_acpi snd_pcm snd_timer hwmon iTCO_wdt snd e1000e pcspkr i2c_i801 usbhid iTCO_vendor_support wmi cfg80211 yenta_socket rsrc_nonstatic pata_acpi snd_page_alloc soundcore uhci_hcd ohci_hcd ehci_hcd usbcore i915 drm_kms_helper drm i2c_algo_bit i2c_core video output [last unloaded: ath]
[ 602.894005] Pid: 2506, comm: ping Tainted: G W 2.6.34-rc3-wl #20
[ 602.894005] Call Trace:
[ 602.894005] <IRQ> [<
ffffffff8104a41c>] warn_slowpath_common+0x7c/0x94
[ 602.894005] [<
ffffffffa022f398>] ? __skb_queue_purge+0x43/0x4a [ath9k_htc]
[ 602.894005] [<
ffffffff8104a448>] warn_slowpath_null+0x14/0x16
[ 602.894005] [<
ffffffff813269c1>] skb_release_head_state+0x71/0x87
[ 602.894005] [<
ffffffff8132829a>] __kfree_skb+0x16/0x81
[ 602.894005] [<
ffffffff813283b2>] kfree_skb+0x7e/0x86
[ 602.894005] [<
ffffffffa022f398>] __skb_queue_purge+0x43/0x4a [ath9k_htc]
[ 602.894005] [<
ffffffffa022f560>] __hif_usb_tx+0x1c1/0x21b [ath9k_htc]
[ 602.894005] [<
ffffffffa022f73c>] hif_usb_tx_cb+0x12f/0x154 [ath9k_htc]
[ 602.894005] [<
ffffffffa00d2fbe>] usb_hcd_giveback_urb+0x91/0xc5 [usbcore]
[ 602.894005] [<
ffffffffa00f6c34>] ehci_urb_done+0x7a/0x8b [ehci_hcd]
[ 602.894005] [<
ffffffffa00f6f33>] qh_completions+0x2ee/0x376 [ehci_hcd]
[ 602.894005] [<
ffffffffa00f8ba5>] ehci_work+0x95/0x76e [ehci_hcd]
[ 602.894005] [<
ffffffffa00fa5ae>] ? ehci_irq+0x2f/0x1d4 [ehci_hcd]
[ 602.894005] [<
ffffffffa00fa725>] ehci_irq+0x1a6/0x1d4 [ehci_hcd]
[ 602.894005] [<
ffffffff810a6d18>] ? __rcu_process_callbacks+0x7a/0x2df
[ 602.894005] [<
ffffffff810a47a4>] ? handle_fasteoi_irq+0x22/0xd2
[ 602.894005] [<
ffffffffa00d268d>] usb_hcd_irq+0x4a/0xa7 [usbcore]
[ 602.894005] [<
ffffffff810a2853>] handle_IRQ_event+0x77/0x14f
[ 602.894005] [<
ffffffff813285ce>] ? skb_release_data+0xc9/0xce
[ 602.894005] [<
ffffffff810a4814>] handle_fasteoi_irq+0x92/0xd2
[ 602.894005] [<
ffffffff8100c4fb>] handle_irq+0x88/0x91
[ 602.894005] [<
ffffffff8100baed>] do_IRQ+0x63/0xc9
[ 602.894005] [<
ffffffff81354245>] ? ip_flush_pending_frames+0x4d/0x5c
[ 602.894005] [<
ffffffff813ba993>] ret_from_intr+0x0/0x16
[ 602.894005] <EOI> [<
ffffffff811095fe>] ? __delete_object+0x5a/0xb1
[ 602.894005] [<
ffffffff813ba5f5>] ? _raw_write_unlock_irqrestore+0x47/0x7e
[ 602.894005] [<
ffffffff813ba5fa>] ? _raw_write_unlock_irqrestore+0x4c/0x7e
[ 602.894005] [<
ffffffff811095fe>] __delete_object+0x5a/0xb1
[ 602.894005] [<
ffffffff81109814>] delete_object_full+0x25/0x31
[ 602.894005] [<
ffffffff813a60c0>] kmemleak_free+0x26/0x45
[ 602.894005] [<
ffffffff810ff517>] kfree+0xaa/0x149
[ 602.894005] [<
ffffffff81323fb7>] ? sock_def_write_space+0x84/0x89
[ 602.894005] [<
ffffffff81354245>] ? ip_flush_pending_frames+0x4d/0x5c
[ 602.894005] [<
ffffffff813285ce>] skb_release_data+0xc9/0xce
[ 602.894005] [<
ffffffff813282a2>] __kfree_skb+0x1e/0x81
[ 602.894005] [<
ffffffff813283b2>] kfree_skb+0x7e/0x86
[ 602.894005] [<
ffffffff81354245>] ip_flush_pending_frames+0x4d/0x5c
[ 602.894005] [<
ffffffff81370c1f>] raw_sendmsg+0x653/0x709
[ 602.894005] [<
ffffffff81379e31>] inet_sendmsg+0x54/0x5d
[ 602.894005] [<
ffffffff813207a2>] ? sock_recvmsg+0xc6/0xdf
[ 602.894005] [<
ffffffff813208c1>] sock_sendmsg+0xc0/0xd9
[ 602.894005] [<
ffffffff810e13b4>] ? might_fault+0x68/0xb8
[ 602.894005] [<
ffffffff810e13fd>] ? might_fault+0xb1/0xb8
[ 602.894005] [<
ffffffff8132a1c3>] ? copy_from_user+0x2f/0x31
[ 602.894005] [<
ffffffff8132a5b3>] ? verify_iovec+0x54/0x91
[ 602.894005] [<
ffffffff81320d41>] sys_sendmsg+0x1da/0x241
[ 602.894005] [<
ffffffff8103d327>] ? finish_task_switch+0x0/0xc9
[ 602.894005] [<
ffffffff8103d327>] ? finish_task_switch+0x0/0xc9
[ 602.894005] [<
ffffffff8107642e>] ? trace_hardirqs_on_caller+0x16/0x150
[ 602.894005] [<
ffffffff813ba27d>] ? _raw_spin_unlock_irq+0x56/0x63
[ 602.894005] [<
ffffffff8103d3cb>] ? finish_task_switch+0xa4/0xc9
[ 602.894005] [<
ffffffff8103d327>] ? finish_task_switch+0x0/0xc9
[ 602.894005] [<
ffffffff810357fe>] ? need_resched+0x23/0x2d
[ 602.894005] [<
ffffffff8107642e>] ? trace_hardirqs_on_caller+0x16/0x150
[ 602.894005] [<
ffffffff813b9750>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[ 602.894005] [<
ffffffff81009c02>] system_call_fastpath+0x16/0x1b
[ 602.894005] ---[ end trace
91ba2d8dc7826839 ]---
[2] lockdep warning
[ 169.363215] ======================================================
[ 169.365390] [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ]
[ 169.366334] 2.6.34-rc3-wl #20
[ 169.366872] ------------------------------------------------------
[ 169.366872] khubd/78 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
[ 169.366872] (clock-AF_INET){++.?..}, at: [<
ffffffff81323f51>] sock_def_write_space+0x1e/0x89
[ 169.366872]
[ 169.366872] and this task is already holding:
[ 169.366872] (&(&hif_dev->tx.tx_lock)->rlock){-.-...}, at: [<
ffffffffa03715b0>] hif_usb_stop+0x24/0x53 [ath9k_htc]
[ 169.366872] which would create a new lock dependency:
[ 169.366872] (&(&hif_dev->tx.tx_lock)->rlock){-.-...} -> (clock-AF_INET){++.?..}
[ 169.366872]
[ 169.366872] but this new dependency connects a HARDIRQ-irq-safe lock:
[ 169.366872] (&(&hif_dev->tx.tx_lock)->rlock){-.-...}
[ 169.366872] ... which became HARDIRQ-irq-safe at:
[ 169.366872] [<
ffffffff810772d5>] __lock_acquire+0x2c6/0xd2b
[ 169.366872] [<
ffffffff8107866d>] lock_acquire+0xec/0x119
[ 169.366872] [<
ffffffff813b99bb>] _raw_spin_lock+0x40/0x73
[ 169.366872] [<
ffffffffa037163d>] hif_usb_tx_cb+0x5e/0x154 [ath9k_htc]
[ 169.366872] [<
ffffffffa00d2fbe>] usb_hcd_giveback_urb+0x91/0xc5 [usbcore]
[ 169.366872] [<
ffffffffa00f6c34>] ehci_urb_done+0x7a/0x8b [ehci_hcd]
[ 169.366872] [<
ffffffffa00f6f33>] qh_completions+0x2ee/0x376 [ehci_hcd]
[ 169.366872] [<
ffffffffa00f8ba5>] ehci_work+0x95/0x76e [ehci_hcd]
[ 169.366872] [<
ffffffffa00fa725>] ehci_irq+0x1a6/0x1d4 [ehci_hcd]
[ 169.366872] [<
ffffffffa00d268d>] usb_hcd_irq+0x4a/0xa7 [usbcore]
[ 169.366872] [<
ffffffff810a2853>] handle_IRQ_event+0x77/0x14f
[ 169.366872] [<
ffffffff810a4814>] handle_fasteoi_irq+0x92/0xd2
[ 169.366872] [<
ffffffff8100c4fb>] handle_irq+0x88/0x91
[ 169.366872] [<
ffffffff8100baed>] do_IRQ+0x63/0xc9
[ 169.366872] [<
ffffffff813ba993>] ret_from_intr+0x0/0x16
[ 169.366872] [<
ffffffff8130f6ee>] cpuidle_idle_call+0xa7/0x115
[ 169.366872] [<
ffffffff81008c4f>] cpu_idle+0x68/0xc4
[ 169.366872] [<
ffffffff813a41e0>] rest_init+0x104/0x10b
[ 169.366872] [<
ffffffff81899db3>] start_kernel+0x3f1/0x3fc
[ 169.366872] [<
ffffffff818992c8>] x86_64_start_reservations+0xb3/0xb7
[ 169.366872] [<
ffffffff818993c4>] x86_64_start_kernel+0xf8/0x107
[ 169.366872]
[ 169.366872] to a HARDIRQ-irq-unsafe lock:
[ 169.366872] (clock-AF_INET){++.?..}
[ 169.366872] ... which became HARDIRQ-irq-unsafe at:
[ 169.366872] ... [<
ffffffff81077349>] __lock_acquire+0x33a/0xd2b
[ 169.366872] [<
ffffffff8107866d>] lock_acquire+0xec/0x119
[ 169.366872] [<
ffffffff813b9d07>] _raw_write_lock_bh+0x45/0x7a
[ 169.366872] [<
ffffffff8135cf14>] tcp_close+0x165/0x34d
[ 169.366872] [<
ffffffff8137aced>] inet_release+0x55/0x5c
[ 169.366872] [<
ffffffff81321350>] sock_release+0x1f/0x6e
[ 169.366872] [<
ffffffff813213c6>] sock_close+0x27/0x2b
[ 169.366872] [<
ffffffff8110dd45>] __fput+0x125/0x1ca
[ 169.366872] [<
ffffffff8110de04>] fput+0x1a/0x1c
[ 169.366872] [<
ffffffff8110adc9>] filp_close+0x68/0x72
[ 169.366872] [<
ffffffff8110ae80>] sys_close+0xad/0xe7
[ 169.366872] [<
ffffffff81009c02>] system_call_fastpath+0x16/0x1b
(Trimmed at the "other info that might help us debug this" line in
the interest of brevity... -- JWL)
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ming Lei [Mon, 12 Apr 2010 16:29:15 +0000 (00:29 +0800)]
ath9k-htc:respect usb buffer cacheline alignment in reg out path
In ath9k-htc register out path, ath9k-htc will pass skb->data into
usb hcd and usb hcd will do dma mapping and unmapping to the buffer
pointed by skb->data, so we should pass a cache-line aligned address.
This patch replace __dev_alloc_skb with alloc_skb to make skb->data
pointed to a cacheline aligned address simply since ath9k-htc does not
skb_push on the skb and pass it to mac80211, also use kfree_skb to free
the skb allocated by alloc_skb(we can use kfree_skb safely in hardirq
context since skb->destructor is NULL always in the path).
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ming Lei [Mon, 12 Apr 2010 16:29:05 +0000 (00:29 +0800)]
ath9k-htc:respect usb buffer cacheline alignment in reg in path
In ath9k-htc register in path, ath9k-htc will pass skb->data into
usb hcd and usb hcd will do dma mapping and unmapping to the buffer
pointed by skb->data, so we should pass a cache-line aligned address.
This patch replace __dev_alloc_skb with alloc_skb to make skb->data
pointed to a cacheline aligned address simply since ath9k-htc does not
skb_push on the skb and pass it to mac80211, also use kfree_skb to free
the skb allocated by alloc_skb(we can use kfree_skb safely in hardirq
context since skb->destructor is NULL always in the path).
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ming Lei [Mon, 12 Apr 2010 16:28:53 +0000 (00:28 +0800)]
ath9k-htc:respect usb buffer cacheline alignment in ath9k_hif_usb_alloc_rx_urbs
In ath9k_hif_usb_alloc_rx_urbs, ath9k-htc will pass skb->data into
usb hcd and usb hcd will do dma mapping and unmapping to the buffer
pointed by skb->data, so we should pass a cache-line aligned address.
This patch replace __dev_alloc_skb with alloc_skb to make skb->data
pointed to a cacheline aligned address simply since ath9k-htc does not
skb_push on the skb and pass it to mac80211, also use kfree_skb to free
the skbs allocated by alloc_skb(we can use kfree_skb safely in hardirq
context since skb->destructor is NULL always in the path).
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Bruno Randolf [Mon, 12 Apr 2010 07:38:52 +0000 (16:38 +0900)]
ath5k: treat RXORN as non-fatal
We get RXORN interrupts when all receive buffers are full. This is not
necessarily a fatal situation. It can also happen when the bus is busy or the
CPU is not fast enough to process all frames.
Older chipsets apparently need a reset to come out of this situration, but on
newer chips we can treat RXORN like RX, as going thru a full reset does more
harm than good, there.
The exact chip revisions which need a reset are unknown - this guess
AR5K_SREV_AR5212 ("venice") is copied from the HAL.
Inspired by openwrt 413-rxorn.patch:
"treat rxorn like rx, reset after rxorn seems to do more harm than good"
Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Bruno Randolf [Mon, 12 Apr 2010 07:38:47 +0000 (16:38 +0900)]
ath5k: Use high bitrates for ACK/CTS
There was a confusion in the usage of the bits AR5K_STA_ID1_ACKCTS_6MB and
AR5K_STA_ID1_BASE_RATE_11B. If they are set (1), we will get lower bitrates for
ACK and CTS. Therefore ath5k_hw_set_ack_bitrate_high(ah, false) actually
resulted in high bitrates, which i think is what we want anyways. Cleared the
confusion and added some documentation.
Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
David S. Miller [Wed, 14 Apr 2010 13:45:44 +0000 (06:45 -0700)]
virtio_net: Fix mis-merge.
Pointed out by Stephen Rothwell.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 14 Apr 2010 12:01:33 +0000 (05:01 -0700)]
Merge branch 'master' of /linux/kernel/git/davem/net-2.6
Conflicts:
drivers/net/pcmcia/smc91c92_cs.c
drivers/net/virtio_net.c
Michael S. Tsirkin [Tue, 13 Apr 2010 04:59:44 +0000 (04:59 +0000)]
tun: orphan an skb on tx
The following situation was observed in the field:
tap1 sends packets, tap2 does not consume them, as a result
tap1 can not be closed. This happens because
tun/tap devices can hang on to skbs undefinitely.
As noted by Herbert, possible solutions include a timeout followed by a
copy/change of ownership of the skb, or always copying/changing
ownership if we're going into a hostile device.
This patch implements the second approach.
Note: one issue still remaining is that since skbs
keep reference to tun socket and tun socket has a
reference to tun device, we won't flush backlog,
instead simply waiting for all skbs to get transmitted.
At least this is not user-triggerable, and
this was not reported in practice, my assumption is
other devices besides tap complete an skb
within finite time after it has been queued.
A possible solution for the second issue
would not to have socket reference the device,
instead, implement dev->destructor for tun, and
wait for all skbs to complete there, but this
needs some thought, probably too risky for 2.6.34.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Yan Vugenfirer <yvugenfi@redhat.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Giuseppe CAVALLARO [Tue, 13 Apr 2010 20:21:17 +0000 (20:21 +0000)]
stmmac: updated the drv module version
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Giuseppe CAVALLARO [Tue, 13 Apr 2010 20:21:16 +0000 (20:21 +0000)]
stmmac: fix vlan support setup
Moved STMMAC_VLAN_TAG_USED from stmmac.h to common.h header
because it is used within the device and descriptor cores.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Giuseppe CAVALLARO [Tue, 13 Apr 2010 20:21:15 +0000 (20:21 +0000)]
stmmac: get the descriptor structure from platform
Output for chip that uses the Enhanced descriptors:
[snip]
STMMAC driver:
platform registration... done!
DWMAC1000 - user ID: 0x10, Synopsys ID: 0x33
Enhanced descriptor structure
no valid MAC address;please, use ifconfig or nwhwconfig!
eth0 - (dev. name: stmmaceth - id: 0, IRQ #134
IO base addr: 0xfd110000)
STMMAC MII Bus: probed
[snip]
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Giuseppe CAVALLARO [Tue, 13 Apr 2010 20:21:14 +0000 (20:21 +0000)]
stmmac: new descriptor field for the driver's platform
The new enh_desc is used for selecting the enhanced descriptors
structure. There are several scenarios; some chips (mac10/100
or gmac) want to use the enhanced descriptors; others want the normal
ones.
For example, on ST platforms: MAC10/100 uses the normal desc structure
and the GMAC uses the enhanced one.
It can be useful to get this information from the platform.
This could also be decided at run-time looking at the chip's ID number;
but it could happen that chips with the same ID want to use different
descriptor structure.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Giuseppe CAVALLARO [Tue, 13 Apr 2010 20:21:13 +0000 (20:21 +0000)]
stmmac: fix Transmit FIFO flush operation
Fix the Transmit FIFO flush operation; it was
disabled while reworking the descriptor structures.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Giuseppe CAVALLARO [Tue, 13 Apr 2010 20:21:12 +0000 (20:21 +0000)]
stmmac: rework normal and enhanced descriptors
Currently the driver assumes that the mac10/100 can only use the
normal descriptor structure and the gmac can only use the
enhanced structures.
This patch removes the descriptor's code from the dma files
and adds two new files just for handling the normal and enhanced
descriptors.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Giuseppe CAVALLARO [Tue, 13 Apr 2010 20:21:11 +0000 (20:21 +0000)]
stmmac: split core and dma for the mac10/100
The patch splits core and dma parts for the mac10/100 device.
This was already done for the GMAC device.
It should make more flexible the driver to support other chips.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoph Hellwig [Tue, 13 Apr 2010 18:11:25 +0000 (14:11 -0400)]
vhost: fix sparse warnings
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ayaz Abdulla [Wed, 14 Apr 2010 01:49:51 +0000 (18:49 -0700)]
forcedeth: fix tx limit2 flag check
This is a fix for bug 572201 @ bugs.debian.org
This patch fixes the TX_LIMIT feature flag. The previous logic check
for TX_LIMIT2 also took into account a device that only had TX_LIMIT
set.
Reported-by: Stephen Mulcahu <stephen.mulcahy@deri.org>
Reported-by: Ben Huchings <ben@decadent.org.uk>
Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Tue, 13 Apr 2010 05:03:23 +0000 (05:03 +0000)]
ipv4: ipmr: support multiple tables
This patch adds support for multiple independant multicast routing instances,
named "tables".
Userspace multicast routing daemons can bind to a specific table instance by
issuing a setsockopt call using a new option MRT_TABLE. The table number is
stored in the raw socket data and affects all following ipmr setsockopt(),
getsockopt() and ioctl() calls. By default, a single table (RT_TABLE_DEFAULT)
is created with a default routing rule pointing to it. Newly created pimreg
devices have the table number appended ("pimregX"), with the exception of
devices created in the default table, which are named just "pimreg" for
compatibility reasons.
Packets are directed to a specific table instance using routing rules,
similar to how regular routing rules work. Currently iif, oif and mark
are supported as keys, source and destination addresses could be supported
additionally.
Example usage:
- bind pimd/xorp/... to a specific table:
uint32_t table = 123;
setsockopt(fd, IPPROTO_IP, MRT_TABLE, &table, sizeof(table));
- create routing rules directing packets to the new table:
# ip mrule add iif eth0 lookup 123
# ip mrule add oif eth0 lookup 123
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Tue, 13 Apr 2010 05:03:22 +0000 (05:03 +0000)]
ipv4: ipmr: move mroute data into seperate structure
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Tue, 13 Apr 2010 05:03:21 +0000 (05:03 +0000)]
ipv4: ipmr: convert struct mfc_cache to struct list_head
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Tue, 13 Apr 2010 05:03:20 +0000 (05:03 +0000)]
ipv4: ipmr: remove net pointer from struct mfc_cache
Now that cache entries in unres_queue don't need to be distinguished by their
network namespace pointer anymore, we can remove it from struct mfc_cache
add pass the namespace as function argument to the functions that need it.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Tue, 13 Apr 2010 05:03:19 +0000 (05:03 +0000)]
ipv4: ipmr: move unres_queue and timer to per-namespace data
The unres_queue is currently shared between all namespaces. Following patches
will additionally allow to create multiple multicast routing tables in each
namespace. Having a single shared queue for all these users seems to excessive,
move the queue and the cleanup timer to the per-namespace data to unshare it.
As a side-effect, this fixes a bug in the seq file iteration functions: the
first entry returned is always from the current namespace, entries returned
after that may belong to any namespace.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Tue, 13 Apr 2010 05:03:18 +0000 (05:03 +0000)]
ipv4: raw: move struct raw_sock and raw_sk() to include/net/raw.h
A following patch will use struct raw_sock to store state for ipmr,
so having the definitions in icmp.h doesn't fit very well anymore.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Tue, 13 Apr 2010 05:03:17 +0000 (05:03 +0000)]
net: fib_rules: decouple address families from real address families
Decouple the address family values used for fib_rules from the real
address families in socket.h. This allows to use fib_rules for
code that is not a real address family without increasing AF_MAX/NPROTO.
Values up to 127 are reserved for real address families and map directly
to the corresponding AF value, values starting from 128 are for other
uses. rtnetlink is changed to invoke the AF_UNSPEC dumpit/doit handlers
for these families.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Tue, 13 Apr 2010 05:03:16 +0000 (05:03 +0000)]
net: fib_rules: set family in fib_rule_hdr centrally
All fib_rules implementations need to set the family in their ->fill()
functions. Since the value is available to the generic fib_nl_fill_rule()
function, set it there.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Tue, 13 Apr 2010 05:03:15 +0000 (05:03 +0000)]
net: fib_rules: consolidate IPv4 and DECnet ->default_pref() functions.
Both functions are equivalent, consolidate them since a following patch
needs a third implementation for multicast routing.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jan Engelhardt [Tue, 13 Apr 2010 13:32:16 +0000 (15:32 +0200)]
netfilter: ipv6: add IPSKB_REROUTED exclusion to NF_HOOK/POSTROUTING invocation
Similar to how IPv4's ip_output.c works, have ip6_output also check
the IPSKB_REROUTED flag. It will be set from xt_TEE for cloned packets
since Xtables can currently only deal with a single packet in flight
at a time.
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Acked-by: David S. Miller <davem@davemloft.net>
[Patrick: changed to use an IP6SKB value instead of IPSKB]
Signed-off-by: Patrick McHardy <kaber@trash.net>
Jan Engelhardt [Tue, 13 Apr 2010 13:28:11 +0000 (15:28 +0200)]
netfilter: ipv6: move POSTROUTING invocation before fragmentation
Patrick McHardy notes: "We used to invoke IPv4 POST_ROUTING after
fragmentation as well just to defragment the packets in conntrack
immediately afterwards, but that got changed during the
netfilter-ipsec integration. Ideally IPv6 would behave like IPv4."
This patch makes it so. Sending an oversized frame (e.g. `ping6
-s64000 -c1 ::1`) will now show up in POSTROUTING as a single skb
rather than multiple ones.
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Alexey Dobriyan [Tue, 13 Apr 2010 12:09:15 +0000 (14:09 +0200)]
Restore __ALIGN_MASK()
Fix lib/bitmap.c compile failure due to __ALIGN_KERNEL changes.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
stephen hemminger [Mon, 12 Apr 2010 07:38:05 +0000 (07:38 +0000)]
dst: don't inline dst_ifdown
The function dst_ifdown is called only two places but in a non-
performance critical code path, there is no reason to inline it.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sathya Perla [Sun, 11 Apr 2010 22:35:27 +0000 (22:35 +0000)]
be2net: clarify promiscuous cmd with a comment
The promiscous cmd config code gives an impression that
setting a port to promisc mode will unset the other port.
This is not the case and is clarified with a comment.
Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sat, 10 Apr 2010 22:48:14 +0000 (22:48 +0000)]
drivers: net: last_rx elimination
Network drivers do not have to update last_rx, unless they need it for
their private use.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sun, 11 Apr 2010 06:56:11 +0000 (06:56 +0000)]
net: uninline skb_bond_should_drop()
skb_bond_should_drop() is too big to be inlined.
This patch reduces kernel text size, and its compilation time as well
(shrinking include/linux/netdevice.h)
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hans J. Koch [Tue, 13 Apr 2010 00:03:25 +0000 (00:03 +0000)]
Fix some #includes in CAN drivers (rebased for net-next-2.6)
In the current implementation, CAN drivers need to #include <linux/can.h>
_before_ they #include <linux/can/dev.h>, which is both ugly and
unnecessary.
Fix this by including <linux/can.h> in <linux/can/dev.h> and remove the
#include <linux/can.h> lines from drivers.
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Fri, 9 Apr 2010 01:04:52 +0000 (01:04 +0000)]
bcm63xx_enet: do not overwrite ENET_CTL_REG value
bcm_enet_hw_preinit will correctly set values in ENET_CTL_REG for internal
or external MII operations, however, bcm_enet_open will blindly overwrite the
ENET_CTL_REG register value and thus we will loose any changes to it that
were made in bcm_enet_hw_preinit, rendering external MII operations non-working.
This would lead to the driver not being able to check for link availability on
external PHY setups, and thus we would never get to sending packets because
link was down from the driver side.
This was completely un-noticed because all boards out there but BCM6338-based
ones use internal phy on their enet0 interface.
Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Fri, 9 Apr 2010 01:04:45 +0000 (01:04 +0000)]
PHY: fix typo in bcm63xx PHY driver table
Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 13 Apr 2010 10:07:17 +0000 (03:07 -0700)]
chelsio: Fix build warning.
GCC warns that:
drivers/net/chelsio/sge.c:463:11: warning: operation on 's->port' may be undefined
Better to eliminate the side effects in the calculation and
express what was intended here.
Signed-off-by: David S. Miller <davem@davemloft.net>
Ken Kawasaki [Sat, 10 Apr 2010 12:50:14 +0000 (12:50 +0000)]
smc91c92_cs: define multicast_table as unsigned char
smc91c92_cs:
* define multicast_table as unsigned char
* remove unnecessary "#ifndef final_version"
Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 9 Apr 2010 23:47:31 +0000 (23:47 +0000)]
can: avoids a false warning
At this point optlen == sizeof(sfilter) but some compilers are dumb.
Reported-by: Németh Márton <nm127@freemail.h
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Oliver Hartkopp <oliver@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Terry Loftin [Fri, 9 Apr 2010 10:29:49 +0000 (10:29 +0000)]
e1000e: stop cleaning when we reach tx_ring->next_to_use
Tx ring buffers after tx_ring->next_to_use are volatile and could
change, possibly causing a crash. Stop cleaning when we hit
tx_ring->next_to_use.
Signed-off-by: Terry Loftin <terry.loftin@hp.com>
Acked-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Assmann [Fri, 9 Apr 2010 09:51:34 +0000 (09:51 +0000)]
igb: restrict WoL for 82576 ET2 Quad Port Server Adapter
Restrict Wake-on-LAN to first port on 82576 ET2 quad port NICs, as it is
only supported there.
Signed-off-by: Stefan Assmann <sassmann@redhat.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesse Brandeburg [Fri, 9 Apr 2010 10:51:09 +0000 (10:51 +0000)]
e1000e: use static params to save stack space
used a modified checkstack to get the 56 number
(normally checkstack wouldn't show this low a value)
checkstack before:
0x0000012f e1000e_check_options [e1000e]: 272
after:
0x0000012f e1000e_check_options [e1000e]: 56
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Fri, 9 Apr 2010 10:01:37 +0000 (10:01 +0000)]
skbuff: remove unused dev_consume_skb macro definition
dev_consume_skb and kfree_skb_clean have no users and in the case of
kfree_skb_clean could cause potential build issues since I cannot find
where it is defined. Based on the patch in which it was introduced it
appears to have been a bit of leftover code from an earlier version of the
patch in which kfree_skb_clean was dropped in favor of consume_skb.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>