OSDN Git Service
David Ahern [Sun, 3 Dec 2017 17:33:00 +0000 (09:33 -0800)]
tcp: use IPCB instead of TCP_SKB_CB in inet_exact_dif_match()
[ Usptream commit
b4d1605a8ea608fd7dc45b926a05d75d340bde4b ]
After this fix : ("tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb()"),
socket lookups happen while skb->cb[] has not been mangled yet by TCP.
Fixes:
a04a480d4392 ("net: Require exact match for TCP socket lookups if dif is l3mdev")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julian Wiedmann [Fri, 1 Dec 2017 09:14:50 +0000 (10:14 +0100)]
s390/qeth: fix GSO throughput regression
[ Upstream commit
6d69b1f1eb7a2edf8a3547f361c61f2538e054bb ]
Using GSO with small MTUs currently results in a substantial throughput
regression - which is caused by how qeth needs to map non-linear skbs
into its IO buffer elements:
compared to a linear skb, each GSO-segmented skb effectively consumes
twice as many buffer elements (ie two instead of one) due to the
additional header-only part. This causes the Output Queue to be
congested with low-utilized IO buffers.
Fix this as follows:
If the MSS is low enough so that a non-SG GSO segmentation produces
order-0 skbs (currently ~3500 byte), opt out from NETIF_F_SG. This is
where we anticipate the biggest savings, since an SG-enabled
GSO segmentation produces skbs that always consume at least two
buffer elements.
Larger MSS values continue to get a SG-enabled GSO segmentation, since
1) the relative overhead of the additional header-only buffer element
becomes less noticeable, and
2) the linearization overhead increases.
With the throughput regression fixed, re-enable NETIF_F_SG by default to
reap the significant CPU savings of GSO.
Fixes:
5722963a8e83 ("qeth: do not turn on SG per default")
Reported-by: Nils Hoppmann <niho@de.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julian Wiedmann [Fri, 1 Dec 2017 09:14:49 +0000 (10:14 +0100)]
s390/qeth: fix thinko in IPv4 multicast address tracking
[ Upsteam commit
bc3ab70584696cb798b9e1e0ac8e6ced5fd4c3b8 ]
Commit
5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback")
reworked how secondary addresses are managed for qeth devices.
Instead of dropping & subsequently re-adding all addresses on every
ndo_set_rx_mode() call, qeth now keeps track of the addresses that are
currently registered with the HW.
On a ndo_set_rx_mode(), we thus only need to do (de-)registration
requests for the addresses that have actually changed.
On L3 devices, the lookup for IPv4 Multicast addresses checks the wrong
hashtable - and thus never finds a match. As a result, we first delete
*all* such addresses, and then re-add them again. So each set_rx_mode()
causes a short period where the IPv4 Multicast addresses are not
registered, and the card stops forwarding inbound traffic for them.
Fix this by setting the ->is_multicast flag on the lookup object, thus
enabling qeth_l3_ip_from_hash() to search the correct hashtable and
find a match there.
Fixes:
5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julian Wiedmann [Fri, 1 Dec 2017 09:14:51 +0000 (10:14 +0100)]
s390/qeth: build max size GSO skbs on L2 devices
[ Upstream commit
0cbff6d4546613330a1c5f139f5c368e4ce33ca1 ]
The current GSO skb size limit was copy&pasted over from the L3 path,
where it is needed due to a TSO limitation.
As L2 devices don't offer TSO support (and thus all GSO skbs are
segmented before they reach the driver), there's no reason to restrict
the stack in how large it may build the GSO skbs.
Fixes:
d52aec97e5bc ("qeth: enable scatter/gather in layer 2 mode")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Fri, 1 Dec 2017 18:06:56 +0000 (10:06 -0800)]
tcp/dccp: block bh before arming time_wait timer
[ Upstream commit
cfac7f836a715b91f08c851df915d401a4d52783 ]
Maciej Żenczykowski reported some panics in tcp_twsk_destructor()
that might be caused by the following bug.
timewait timer is pinned to the cpu, because we want to transition
timwewait refcount from 0 to 4 in one go, once everything has been
initialized.
At the time commit
ed2e92394589 ("tcp/dccp: fix timewait races in timer
handling") was merged, TCP was always running from BH habdler.
After commit
5413d1babe8f ("net: do not block BH while processing
socket backlog") we definitely can run tcp_time_wait() from process
context.
We need to block BH in the critical section so that the pinned timer
has still its purpose.
This bug is more likely to happen under stress and when very small RTO
are used in datacenter flows.
Fixes:
5413d1babe8f ("net: do not block BH while processing socket backlog")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Maciej Żenczykowski <maze@google.com>
Acked-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lars Persson [Fri, 1 Dec 2017 10:12:44 +0000 (11:12 +0100)]
stmmac: reset last TSO segment size after device open
[ Upstream commit
45ab4b13e46325d00f4acdb365d406e941a15f81 ]
The mss variable tracks the last max segment size sent to the TSO
engine. We do not update the hardware as long as we receive skb:s with
the same value in gso_size.
During a network device down/up cycle (mapped to stmmac_release() and
stmmac_open() callbacks) we issue a reset to the hardware and it
forgets the setting for mss. However we did not zero out our mss
variable so the next transmission of a gso packet happens with an
undefined hardware setting.
This triggers a hang in the TSO engine and eventuelly the netdev
watchdog will bark.
Fixes:
f748be531d70 ("stmmac: support new GMAC4")
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Tue, 5 Dec 2017 20:45:56 +0000 (12:45 -0800)]
net: remove hlist_nulls_add_tail_rcu()
[ Upstream commit
d7efc6c11b277d9d80b99b1334a78bfe7d7edf10 ]
Alexander Potapenko reported use of uninitialized memory [1]
This happens when inserting a request socket into TCP ehash,
in __sk_nulls_add_node_rcu(), since sk_reuseport is not initialized.
Bug was added by commit
d894ba18d4e4 ("soreuseport: fix ordering for
mixed v4/v6 sockets")
Note that
d296ba60d8e2 ("soreuseport: Resolve merge conflict for v4/v6
ordering fix") missed the opportunity to get rid of
hlist_nulls_add_tail_rcu() :
Both UDP sockets and TCP/DCCP listeners no longer use
__sk_nulls_add_node_rcu() for their hash insertion.
Since all other sockets have unique 4-tuple, the reuseport status
has no special meaning, so we can always use hlist_nulls_add_head_rcu()
for them and save few cycles/instructions.
[1]
==================================================================
BUG: KMSAN: use of uninitialized memory in inet_ehash_insert+0xd40/0x1050
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.13.0+ #3288
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:16
dump_stack+0x185/0x1d0 lib/dump_stack.c:52
kmsan_report+0x13f/0x1c0 mm/kmsan/kmsan.c:1016
__msan_warning_32+0x69/0xb0 mm/kmsan/kmsan_instr.c:766
__sk_nulls_add_node_rcu ./include/net/sock.h:684
inet_ehash_insert+0xd40/0x1050 net/ipv4/inet_hashtables.c:413
reqsk_queue_hash_req net/ipv4/inet_connection_sock.c:754
inet_csk_reqsk_queue_hash_add+0x1cc/0x300 net/ipv4/inet_connection_sock.c:765
tcp_conn_request+0x31e7/0x36f0 net/ipv4/tcp_input.c:6414
tcp_v4_conn_request+0x16d/0x220 net/ipv4/tcp_ipv4.c:1314
tcp_rcv_state_process+0x42a/0x7210 net/ipv4/tcp_input.c:5917
tcp_v4_do_rcv+0xa6a/0xcd0 net/ipv4/tcp_ipv4.c:1483
tcp_v4_rcv+0x3de0/0x4ab0 net/ipv4/tcp_ipv4.c:1763
ip_local_deliver_finish+0x6bb/0xcb0 net/ipv4/ip_input.c:216
NF_HOOK ./include/linux/netfilter.h:248
ip_local_deliver+0x3fa/0x480 net/ipv4/ip_input.c:257
dst_input ./include/net/dst.h:477
ip_rcv_finish+0x6fb/0x1540 net/ipv4/ip_input.c:397
NF_HOOK ./include/linux/netfilter.h:248
ip_rcv+0x10f6/0x15c0 net/ipv4/ip_input.c:488
__netif_receive_skb_core+0x36f6/0x3f60 net/core/dev.c:4298
__netif_receive_skb net/core/dev.c:4336
netif_receive_skb_internal+0x63c/0x19c0 net/core/dev.c:4497
napi_skb_finish net/core/dev.c:4858
napi_gro_receive+0x629/0xa50 net/core/dev.c:4889
e1000_receive_skb drivers/net/ethernet/intel/e1000/e1000_main.c:4018
e1000_clean_rx_irq+0x1492/0x1d30
drivers/net/ethernet/intel/e1000/e1000_main.c:4474
e1000_clean+0x43aa/0x5970 drivers/net/ethernet/intel/e1000/e1000_main.c:3819
napi_poll net/core/dev.c:5500
net_rx_action+0x73c/0x1820 net/core/dev.c:5566
__do_softirq+0x4b4/0x8dd kernel/softirq.c:284
invoke_softirq kernel/softirq.c:364
irq_exit+0x203/0x240 kernel/softirq.c:405
exiting_irq+0xe/0x10 ./arch/x86/include/asm/apic.h:638
do_IRQ+0x15e/0x1a0 arch/x86/kernel/irq.c:263
common_interrupt+0x86/0x86
Fixes:
d894ba18d4e4 ("soreuseport: fix ordering for mixed v4/v6 sockets")
Fixes:
d296ba60d8e2 ("soreuseport: Resolve merge conflict for v4/v6 ordering fix")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Alexander Potapenko <glider@google.com>
Acked-by: Craig Gallek <kraig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bjørn Mork [Wed, 6 Dec 2017 19:21:24 +0000 (20:21 +0100)]
usbnet: fix alignment for frames with no ethernet header
[ Upstream commit
a4abd7a80addb4a9547f7dfc7812566b60ec505c ]
The qmi_wwan minidriver support a 'raw-ip' mode where frames are
received without any ethernet header. This causes alignment issues
because the skbs allocated by usbnet are "IP aligned".
Fix by allowing minidrivers to disable the additional alignment
offset. This is implemented using a per-device flag, since the same
minidriver also supports 'ethernet' mode.
Fixes:
32f7adf633b9 ("net: qmi_wwan: support "raw IP" mode")
Reported-and-tested-by: Jay Foster <jay@systech.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Thu, 30 Nov 2017 01:43:57 +0000 (17:43 -0800)]
tcp: remove buggy call to tcp_v6_restore_cb()
[ Upstream commit
3016dad75b48279e579117ee3ed566ba90a3b023 ]
tcp_v6_send_reset() expects to receive an skb with skb->cb[] layout as
used in TCP stack.
MD5 lookup uses tcp_v6_iif() and tcp_v6_sdif() and thus
TCP_SKB_CB(skb)->header.h6
This patch probably fixes RST packets sent on behalf of a timewait md5
ipv6 socket.
Before Florian patch, tcp_v6_restore_cb() was needed before jumping to
no_tcp_socket label.
Fixes:
271c3b9b7bda ("tcp: honour SO_BINDTODEVICE for TW_RST case too")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Tue, 28 Nov 2017 16:03:30 +0000 (08:03 -0800)]
net/packet: fix a race in packet_bind() and packet_notifier()
[ Upstream commit
15fe076edea787807a7cdc168df832544b58eba6 ]
syzbot reported crashes [1] and provided a C repro easing bug hunting.
When/if packet_do_bind() calls __unregister_prot_hook() and releases
po->bind_lock, another thread can run packet_notifier() and process an
NETDEV_UP event.
This calls register_prot_hook() and hooks again the socket right before
first thread is able to grab again po->bind_lock.
Fixes this issue by temporarily setting po->num to 0, as suggested by
David Miller.
[1]
dev_remove_pack:
ffff8801bf16fa80 not found
------------[ cut here ]------------
kernel BUG at net/core/dev.c:7945! ( BUG_ON(!list_empty(&dev->ptype_all)); )
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
device syz0 entered promiscuous mode
CPU: 0 PID: 3161 Comm: syzkaller404108 Not tainted 4.14.0+ #190
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
task:
ffff8801cc57a500 task.stack:
ffff8801cc588000
RIP: 0010:netdev_run_todo+0x772/0xae0 net/core/dev.c:7945
RSP: 0018:
ffff8801cc58f598 EFLAGS:
00010293
RAX:
ffff8801cc57a500 RBX:
dffffc0000000000 RCX:
ffffffff841f75b2
RDX:
0000000000000000 RSI:
1ffff100398b1ede RDI:
ffff8801bf1f8810
device syz0 entered promiscuous mode
RBP:
ffff8801cc58f898 R08:
0000000000000001 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000000 R12:
ffff8801bf1f8cd8
R13:
ffff8801cc58f870 R14:
ffff8801bf1f8780 R15:
ffff8801cc58f7f0
FS:
0000000001716880(0000) GS:
ffff8801db400000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000020b13000 CR3:
0000000005e25000 CR4:
00000000001406f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
rtnl_unlock+0xe/0x10 net/core/rtnetlink.c:106
tun_detach drivers/net/tun.c:670 [inline]
tun_chr_close+0x49/0x60 drivers/net/tun.c:2845
__fput+0x333/0x7f0 fs/file_table.c:210
____fput+0x15/0x20 fs/file_table.c:244
task_work_run+0x199/0x270 kernel/task_work.c:113
exit_task_work include/linux/task_work.h:22 [inline]
do_exit+0x9bb/0x1ae0 kernel/exit.c:865
do_group_exit+0x149/0x400 kernel/exit.c:968
SYSC_exit_group kernel/exit.c:979 [inline]
SyS_exit_group+0x1d/0x20 kernel/exit.c:977
entry_SYSCALL_64_fastpath+0x1f/0x96
RIP: 0033:0x44ad19
Fixes:
30f7ea1c2b5f ("packet: race condition in packet_bind")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Francesco Ruggeri <fruggeri@aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Maloney [Tue, 28 Nov 2017 15:44:29 +0000 (10:44 -0500)]
packet: fix crash in fanout_demux_rollover()
syzkaller found a race condition fanout_demux_rollover() while removing
a packet socket from a fanout group.
po->rollover is read and operated on during packet_rcv_fanout(), via
fanout_demux_rollover(), but the pointer is currently cleared before the
synchronization in packet_release(). It is safer to delay the cleanup
until after synchronize_net() has been called, ensuring all calls to
packet_rcv_fanout() for this socket have finished.
To further simplify synchronization around the rollover structure, set
po->rollover in fanout_add() only if there are no errors. This removes
the need for rcu in the struct and in the call to
packet_getsockopt(..., PACKET_ROLLOVER_STATS, ...).
Crashing stack trace:
fanout_demux_rollover+0xb6/0x4d0 net/packet/af_packet.c:1392
packet_rcv_fanout+0x649/0x7c8 net/packet/af_packet.c:1487
dev_queue_xmit_nit+0x835/0xc10 net/core/dev.c:1953
xmit_one net/core/dev.c:2975 [inline]
dev_hard_start_xmit+0x16b/0xac0 net/core/dev.c:2995
__dev_queue_xmit+0x17a4/0x2050 net/core/dev.c:3476
dev_queue_xmit+0x17/0x20 net/core/dev.c:3509
neigh_connected_output+0x489/0x720 net/core/neighbour.c:1379
neigh_output include/net/neighbour.h:482 [inline]
ip6_finish_output2+0xad1/0x22a0 net/ipv6/ip6_output.c:120
ip6_finish_output+0x2f9/0x920 net/ipv6/ip6_output.c:146
NF_HOOK_COND include/linux/netfilter.h:239 [inline]
ip6_output+0x1f4/0x850 net/ipv6/ip6_output.c:163
dst_output include/net/dst.h:459 [inline]
NF_HOOK.constprop.35+0xff/0x630 include/linux/netfilter.h:250
mld_sendpack+0x6a8/0xcc0 net/ipv6/mcast.c:1660
mld_send_initial_cr.part.24+0x103/0x150 net/ipv6/mcast.c:2072
mld_send_initial_cr net/ipv6/mcast.c:2056 [inline]
ipv6_mc_dad_complete+0x99/0x130 net/ipv6/mcast.c:2079
addrconf_dad_completed+0x595/0x970 net/ipv6/addrconf.c:4039
addrconf_dad_work+0xac9/0x1160 net/ipv6/addrconf.c:3971
process_one_work+0xbf0/0x1bc0 kernel/workqueue.c:2113
worker_thread+0x223/0x1990 kernel/workqueue.c:2247
kthread+0x35e/0x430 kernel/kthread.c:231
ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:432
Fixes:
0648ab70afe6 ("packet: rollover prepare: per-socket state")
Fixes:
509c7a1ecc860 ("packet: avoid panic in packet_getsockopt()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Mike Maloney <maloney@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Sun, 3 Dec 2017 17:32:59 +0000 (09:32 -0800)]
tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb()
[ Upstream commit
eeea10b83a139451130df1594f26710c8fa390c8 ]
James Morris reported kernel stack corruption bug [1] while
running the SELinux testsuite, and bisected to a recent
commit
bffa72cf7f9d ("net: sk_buff rbnode reorg")
We believe this commit is fine, but exposes an older bug.
SELinux code runs from tcp_filter() and might send an ICMP,
expecting IP options to be found in skb->cb[] using regular IPCB placement.
We need to defer TCP mangling of skb->cb[] after tcp_filter() calls.
This patch adds tcp_v4_fill_cb()/tcp_v4_restore_cb() in a very
similar way we added them for IPv6.
[1]
[ 339.806024] SELinux: failure in selinux_parse_skb(), unable to parse packet
[ 339.822505] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in:
ffffffff81745af5
[ 339.822505]
[ 339.852250] CPU: 4 PID: 3642 Comm: client Not tainted 4.15.0-rc1-test #15
[ 339.868498] Hardware name: LENOVO 10FGS0VA1L/30BC, BIOS FWKT68A 01/19/2017
[ 339.885060] Call Trace:
[ 339.896875] <IRQ>
[ 339.908103] dump_stack+0x63/0x87
[ 339.920645] panic+0xe8/0x248
[ 339.932668] ? ip_push_pending_frames+0x33/0x40
[ 339.946328] ? icmp_send+0x525/0x530
[ 339.958861] ? kfree_skbmem+0x60/0x70
[ 339.971431] __stack_chk_fail+0x1b/0x20
[ 339.984049] icmp_send+0x525/0x530
[ 339.996205] ? netlbl_skbuff_err+0x36/0x40
[ 340.008997] ? selinux_netlbl_err+0x11/0x20
[ 340.021816] ? selinux_socket_sock_rcv_skb+0x211/0x230
[ 340.035529] ? security_sock_rcv_skb+0x3b/0x50
[ 340.048471] ? sk_filter_trim_cap+0x44/0x1c0
[ 340.061246] ? tcp_v4_inbound_md5_hash+0x69/0x1b0
[ 340.074562] ? tcp_filter+0x2c/0x40
[ 340.086400] ? tcp_v4_rcv+0x820/0xa20
[ 340.098329] ? ip_local_deliver_finish+0x71/0x1a0
[ 340.111279] ? ip_local_deliver+0x6f/0xe0
[ 340.123535] ? ip_rcv_finish+0x3a0/0x3a0
[ 340.135523] ? ip_rcv_finish+0xdb/0x3a0
[ 340.147442] ? ip_rcv+0x27c/0x3c0
[ 340.158668] ? inet_del_offload+0x40/0x40
[ 340.170580] ? __netif_receive_skb_core+0x4ac/0x900
[ 340.183285] ? rcu_accelerate_cbs+0x5b/0x80
[ 340.195282] ? __netif_receive_skb+0x18/0x60
[ 340.207288] ? process_backlog+0x95/0x140
[ 340.218948] ? net_rx_action+0x26c/0x3b0
[ 340.230416] ? __do_softirq+0xc9/0x26a
[ 340.241625] ? do_softirq_own_stack+0x2a/0x40
[ 340.253368] </IRQ>
[ 340.262673] ? do_softirq+0x50/0x60
[ 340.273450] ? __local_bh_enable_ip+0x57/0x60
[ 340.285045] ? ip_finish_output2+0x175/0x350
[ 340.296403] ? ip_finish_output+0x127/0x1d0
[ 340.307665] ? nf_hook_slow+0x3c/0xb0
[ 340.318230] ? ip_output+0x72/0xe0
[ 340.328524] ? ip_fragment.constprop.54+0x80/0x80
[ 340.340070] ? ip_local_out+0x35/0x40
[ 340.350497] ? ip_queue_xmit+0x15c/0x3f0
[ 340.361060] ? __kmalloc_reserve.isra.40+0x31/0x90
[ 340.372484] ? __skb_clone+0x2e/0x130
[ 340.382633] ? tcp_transmit_skb+0x558/0xa10
[ 340.393262] ? tcp_connect+0x938/0xad0
[ 340.403370] ? ktime_get_with_offset+0x4c/0xb0
[ 340.414206] ? tcp_v4_connect+0x457/0x4e0
[ 340.424471] ? __inet_stream_connect+0xb3/0x300
[ 340.435195] ? inet_stream_connect+0x3b/0x60
[ 340.445607] ? SYSC_connect+0xd9/0x110
[ 340.455455] ? __audit_syscall_entry+0xaf/0x100
[ 340.466112] ? syscall_trace_enter+0x1d0/0x2b0
[ 340.476636] ? __audit_syscall_exit+0x209/0x290
[ 340.487151] ? SyS_connect+0xe/0x10
[ 340.496453] ? do_syscall_64+0x67/0x1b0
[ 340.506078] ? entry_SYSCALL64_slow_path+0x25/0x25
Fixes:
971f10eca186 ("tcp: better TCP_SKB_CB layout to reduce cache line misses")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: James Morris <james.l.morris@oracle.com>
Tested-by: James Morris <james.l.morris@oracle.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hangbin Liu [Thu, 30 Nov 2017 02:41:14 +0000 (10:41 +0800)]
sit: update frag_off info
[ Upstream commit
f859b4af1c52493ec21173ccc73d0b60029b5b88 ]
After parsing the sit netlink change info, we forget to update frag_off in
ipip6_tunnel_update(). Fix it by assigning frag_off with new value.
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Håkon Bugge [Wed, 6 Dec 2017 16:18:28 +0000 (17:18 +0100)]
rds: Fix NULL pointer dereference in __rds_rdma_map
[ Upstream commit
f3069c6d33f6ae63a1668737bc78aaaa51bff7ca ]
This is a fix for syzkaller719569, where memory registration was
attempted without any underlying transport being loaded.
Analysis of the case reveals that it is the setsockopt() RDS_GET_MR
(2) and RDS_GET_MR_FOR_DEST (7) that are vulnerable.
Here is an example stack trace when the bug is hit:
BUG: unable to handle kernel NULL pointer dereference at
00000000000000c0
IP: __rds_rdma_map+0x36/0x440 [rds]
PGD
2f93d03067 P4D
2f93d03067 PUD
2f93d02067 PMD 0
Oops: 0000 [#1] SMP
Modules linked in: bridge stp llc tun rpcsec_gss_krb5 nfsv4
dns_resolver nfs fscache rds binfmt_misc sb_edac intel_powerclamp
coretemp kvm_intel kvm irqbypass crct10dif_pclmul c rc32_pclmul
ghash_clmulni_intel pcbc aesni_intel crypto_simd glue_helper cryptd
iTCO_wdt mei_me sg iTCO_vendor_support ipmi_si mei ipmi_devintf nfsd
shpchp pcspkr i2c_i801 ioatd ma ipmi_msghandler wmi lpc_ich mfd_core
auth_rpcgss nfs_acl lockd grace sunrpc ip_tables ext4 mbcache jbd2
mgag200 i2c_algo_bit drm_kms_helper ixgbe syscopyarea ahci sysfillrect
sysimgblt libahci mdio fb_sys_fops ttm ptp libata sd_mod mlx4_core drm
crc32c_intel pps_core megaraid_sas i2c_core dca dm_mirror
dm_region_hash dm_log dm_mod
CPU: 48 PID: 45787 Comm: repro_set2 Not tainted 4.14.2-3.el7uek.x86_64 #2
Hardware name: Oracle Corporation ORACLE SERVER X5-2L/ASM,MOBO TRAY,2U, BIOS
31110000 03/03/2017
task:
ffff882f9190db00 task.stack:
ffffc9002b994000
RIP: 0010:__rds_rdma_map+0x36/0x440 [rds]
RSP: 0018:
ffffc9002b997df0 EFLAGS:
00010202
RAX:
0000000000000000 RBX:
ffff882fa2182580 RCX:
0000000000000000
RDX:
0000000000000000 RSI:
ffffc9002b997e40 RDI:
ffff882fa2182580
RBP:
ffffc9002b997e30 R08:
0000000000000000 R09:
0000000000000002
R10:
ffff885fb29e3838 R11:
0000000000000000 R12:
ffff882fa2182580
R13:
ffff882fa2182580 R14:
0000000000000002 R15:
0000000020000ffc
FS:
00007fbffa20b700(0000) GS:
ffff882fbfb80000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00000000000000c0 CR3:
0000002f98a66006 CR4:
00000000001606e0
Call Trace:
rds_get_mr+0x56/0x80 [rds]
rds_setsockopt+0x172/0x340 [rds]
? __fget_light+0x25/0x60
? __fdget+0x13/0x20
SyS_setsockopt+0x80/0xe0
do_syscall_64+0x67/0x1b0
entry_SYSCALL64_slow_path+0x25/0x25
RIP: 0033:0x7fbff9b117f9
RSP: 002b:
00007fbffa20aed8 EFLAGS:
00000293 ORIG_RAX:
0000000000000036
RAX:
ffffffffffffffda RBX:
00000000000c84a4 RCX:
00007fbff9b117f9
RDX:
0000000000000002 RSI:
0000400000000114 RDI:
000000000000109b
RBP:
00007fbffa20af10 R08:
0000000000000020 R09:
00007fbff9dd7860
R10:
0000000020000ffc R11:
0000000000000293 R12:
0000000000000000
R13:
00007fbffa20b9c0 R14:
00007fbffa20b700 R15:
0000000000000021
Code: 41 56 41 55 49 89 fd 41 54 53 48 83 ec 18 8b 87 f0 02 00 00 48
89 55 d0 48 89 4d c8 85 c0 0f 84 2d 03 00 00 48 8b 87 00 03 00 00 <48>
83 b8 c0 00 00 00 00 0f 84 25 03 00 0 0 48 8b 06 48 8b 56 08
The fix is to check the existence of an underlying transport in
__rds_rdma_map().
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Xu [Fri, 1 Dec 2017 10:10:36 +0000 (05:10 -0500)]
vhost: fix skb leak in handle_rx()
[ Upstream commit
6e474083f3daf3a3546737f5d7d502ad12eb257c ]
Matthew found a roughly 40% tcp throughput regression with commit
c67df11f(vhost_net: try batch dequing from skb array) as discussed
in the following thread:
https://www.mail-archive.com/netdev@vger.kernel.org/msg187936.html
Eventually we figured out that it was a skb leak in handle_rx()
when sending packets to the VM. This usually happens when a guest
can not drain out vq as fast as vhost fills in, afterwards it sets
off the traffic jam and leaks skb(s) which occurs as no headcount
to send on the vq from vhost side.
This can be avoided by making sure we have got enough headcount
before actually consuming a skb from the batched rx array while
transmitting, which is simply done by moving checking the zero
headcount a bit ahead.
Signed-off-by: Wei Xu <wexu@redhat.com>
Reported-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jon Maloy [Mon, 4 Dec 2017 21:00:20 +0000 (22:00 +0100)]
tipc: fix memory leak in tipc_accept_from_sock()
[ Upstream commit
a7d5f107b4978e08eeab599ee7449af34d034053 ]
When the function tipc_accept_from_sock() fails to create an instance of
struct tipc_subscriber it omits to free the already created instance of
struct tipc_conn instance before it returns.
We fix that with this commit.
Reported-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julian Wiedmann [Wed, 18 Oct 2017 15:40:17 +0000 (17:40 +0200)]
s390/qeth: fix early exit from error path
[ Upstream commit
83cf79a2fec3cf499eb6cb9eb608656fc2a82776 ]
When the allocation of the addr buffer fails, we need to free
our refcount on the inetdevice before returning.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobias Jakobi [Tue, 21 Nov 2017 15:15:57 +0000 (16:15 +0100)]
net: realtek: r8169: implement set_link_ksettings()
[ Upstream commit
9e77d7a5549dc4d4999a60676373ab3fd1dae4db ]
Commit
6fa1ba61520576cf1346c4ff09a056f2950cb3bf partially
implemented the new ethtool API, by replacing get_settings()
with get_link_ksettings(). This breaks ethtool, since the
userspace tool (according to the new API specs) never tries
the legacy set() call, when the new get() call succeeds.
All attempts to chance some setting from userspace result in:
> Cannot set new settings: Operation not supported
Implement the missing set() call.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Westphal [Wed, 6 Dec 2017 00:04:50 +0000 (01:04 +0100)]
net: thunderx: Fix TCP/UDP checksum offload for IPv4 pkts
[ Upstream commit
134059fd2775be79e26c2dff87d25cc2f6ea5626 ]
Offload IP header checksum to NIC.
This fixes a previous patch which disabled checksum offloading
for both IPv4 and IPv6 packets. So L3 checksum offload was
getting disabled for IPv4 pkts. And HW is dropping these pkts
for some reason.
Without this patch, IPv4 TSO appears to be broken:
WIthout this patch I get ~16kbyte/s, with patch close to 2mbyte/s
when copying files via scp from test box to my home workstation.
Looking at tcpdump on sender it looks like hardware drops IPv4 TSO skbs.
This patch restores performance for me, ipv6 looks good too.
Fixes:
fa6d7cb5d76c ("net: thunderx: Fix TCP/UDP checksum offload for IPv6 pkts")
Cc: Sunil Goutham <sgoutham@cavium.com>
Cc: Aleksey Makarov <aleksey.makarov@auriga.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sunil Goutham [Thu, 23 Nov 2017 19:34:31 +0000 (22:34 +0300)]
net: thunderx: Fix TCP/UDP checksum offload for IPv6 pkts
[ Upstream commit
fa6d7cb5d76cf0467c61420fc9238045aedfd379 ]
Don't offload IP header checksum to NIC.
This fixes a previous patch which enabled checksum offloading
for both IPv4 and IPv6 packets. So L3 checksum offload was
getting enabled for IPv6 pkts. And HW is dropping these pkts
as it assumes the pkt is IPv4 when IP csum offload is set
in the SQ descriptor.
Fixes:
3a9024f52c2e ("net: thunderx: Enable TSO and checksum offloads for ipv6")
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sebastian Sjoholm [Mon, 20 Nov 2017 18:05:17 +0000 (19:05 +0100)]
net: qmi_wwan: add Quectel BG96 2c7c:0296
[ Upstream commit
f9409e7f086fa6c4623769b4b2f4f17a024d8143 ]
Quectel BG96 is an Qualcomm MDM9206 based IoT modem, supporting both
CAT-M and NB-IoT. Tested hardware is BG96 mounted on Quectel development
board (EVB). The USB id is added to qmi_wwan.c to allow QMI
communication with the BG96.
Signed-off-by: Sebastian Sjoholm <ssjoholm@mac.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Thu, 14 Dec 2017 08:53:15 +0000 (09:53 +0100)]
Linux 4.14.6
David Howells [Thu, 2 Nov 2017 15:27:48 +0000 (15:27 +0000)]
afs: Connect up the CB.ProbeUuid
[ Upstream commit
f4b3526d83c40dd8bf5948b9d7a1b2c340f0dcc8 ]
The handler for the CB.ProbeUuid operation in the cache manager is
implemented, but isn't listed in the switch-statement of operation
selection, so won't be used. Fix this by adding it.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Thu, 2 Nov 2017 15:27:51 +0000 (15:27 +0000)]
afs: Fix total-length calculation for multiple-page send
[ Upstream commit
1199db603511d7463d9d3840f96f61967affc766 ]
Fix the total-length calculation in afs_make_call() when the operation
being dispatched has data from a series of pages attached.
Despite the patched code looking like that it should reduce mathematically
to the current code, it doesn't because the 32-bit unsigned arithmetic
being used to calculate the page-offset-difference doesn't correctly extend
to a 64-bit value when the result is effectively negative.
Without this, some FS.StoreData operations that span multiple pages fail,
reporting too little or too much data.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Majd Dibbiny [Mon, 30 Oct 2017 12:23:13 +0000 (14:23 +0200)]
IB/mlx5: Assign send CQ and recv CQ of UMR QP
[ Upstream commit
31fde034a8bd964a5c7c1a5663fc87a913158db2 ]
The UMR's QP is created by calling mlx5_ib_create_qp directly, and
therefore the send CQ and the recv CQ on the ibqp weren't assigned.
Assign them right after calling the mlx5_ib_create_qp to assure
that any access to those pointers will work as expected and won't
crash the system as might happen as part of reset flow.
Fixes:
e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Bloch [Thu, 2 Nov 2017 13:22:26 +0000 (15:22 +0200)]
IB/mlx4: Increase maximal message size under UD QP
[ Upstream commit
5f22a1d87c5315a98981ecf93cd8de226cffe6ca ]
Maximal message should be used as a limit to the max message payload allowed,
without the headers. The ConnectX-3 check is done against this value includes
the headers. When the payload is 4K this will cause the NIC to drop packets.
Increase maximal message to 8K as workaround, this shouldn't change current
behaviour because we continue to set the MTU to 4k.
To reproduce;
set MTU to 4296 on the corresponding interface, for example:
ifconfig eth0 mtu 4296 (both server and client)
On server:
ib_send_bw -c UD -d mlx4_0 -s 4096 -n
1000000 -i1 -m 4096
On client:
ib_send_bw -d mlx4_0 -c UD <server_ip> -s 4096 -n
1000000 -i 1 -m 4096
Fixes:
6e0d733d9215 ("IB/mlx4: Allow 4K messages for UD QPs")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sriharsha Basavapatna [Thu, 2 Nov 2017 21:09:04 +0000 (02:39 +0530)]
bnxt_re: changing the ip address shouldn't affect new connections
[ Upstream commit
063fb5bd1a01937094f40169a20e4aa5ca030db1 ]
While adding a new gid, the driver currently does not return the context
back to the stack. A subsequent del_gid() (e.g, when ip address is changed)
doesn't find the right context in the driver and it ends up dropping that
request. This results in the HW caching a stale gid entry and traffic fails
because of that. Fix by returning the proper context in bnxt_re_add_gid().
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chao Yu [Mon, 13 Nov 2017 09:32:39 +0000 (17:32 +0800)]
f2fs: fix to clear FI_NO_PREALLOC
[ Upstream commit
28cfafb73853f0494b06649716687a3ea07681d5 ]
We need to clear FI_NO_PREALLOC flag in error path of f2fs_file_write_iter,
otherwise we will lose the chance to preallocate blocks in latter write()
at one time.
Fixes:
dc91de78e5e1 ("f2fs: do not preallocate blocks which has wrong buffer")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Herbert Xu [Fri, 10 Nov 2017 03:14:06 +0000 (14:14 +1100)]
xfrm: Copy policy family in clone_policy
[ Upstream commit
0e74aa1d79a5bbc663e03a2804399cae418a0321 ]
The syzbot found an ancient bug in the IPsec code. When we cloned
a socket policy (for example, for a child TCP socket derived from a
listening socket), we did not copy the family field. This results
in a live policy with a zero family field. This triggers a BUG_ON
check in the af_key code when the cloned policy is retrieved.
This patch fixes it by copying the family field over.
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilya Lesokhin [Mon, 13 Nov 2017 08:22:44 +0000 (10:22 +0200)]
tls: Use kzalloc for aead_request allocation
[ Upstream commit
61ef6da622aa7b66bf92991bd272490eea6c712e ]
Use kzalloc for aead_request allocation as
we don't set all the bits in the request.
Fixes:
3c4d7559159b ('tls: kernel TLS support')
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Baron [Mon, 13 Nov 2017 21:48:47 +0000 (16:48 -0500)]
jump_label: Invoke jump_label_test() via early_initcall()
[ Upstream commit
92ee46efeb505ead3ab06d3c5ce695637ed5f152 ]
Fengguang Wu reported that running the rcuperf test during boot can cause
the jump_label_test() to hit a WARN_ON(). The issue is that the core jump
label code relies on kernel_text_address() to detect when it can no longer
update branches that may be contained in __init sections. The
kernel_text_address() in turn assumes that if the system_state variable is
greter than or equal to SYSTEM_RUNNING then __init sections are no longer
valid (since the assumption is that they have been freed). However, when
rcuperf is setup to run in early boot it can call kernel_power_off() which
sets the system_state to SYSTEM_POWER_OFF.
Since rcuperf initialization is invoked via a module_init(), we can make
the dependency of jump_label_test() needing to complete before rcuperf
explicit by calling it via early_initcall().
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1510609727-2238-1-git-send-email-jbaron@akamai.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arvind Yadav [Tue, 14 Nov 2017 08:12:38 +0000 (13:42 +0530)]
atm: horizon: Fix irq release error
[ Upstream commit
bde533f2ea607cbbbe76ef8738b36243939a7bc2 ]
atm_dev_register() can fail here and passed parameters to free irq
which is not initialised. Initialization of 'dev->irq' happened after
the 'goto out_free_irq'. So using 'irq' insted of 'dev->irq' in
free_irq().
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masahiro Yamada [Sat, 30 Sep 2017 01:10:09 +0000 (10:10 +0900)]
kbuild: rpm-pkg: fix jobserver unavailable warning
[ Upstream commit
606625be47bc87b6fab0af10cd57aaa675cb9e42 ]
If "make rpm-pkg" or "make binrpm-pkg" is run with -j[jobs] option,
the following warning message is displayed.
warning: jobserver unavailable: using -j1. Add '+' to parent make rule.
Follow the suggestion.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudeep Holla [Thu, 28 Sep 2017 10:18:53 +0000 (11:18 +0100)]
mailbox: mailbox-test: don't rely on rx_buffer content to signal data ready
[ Upstream commit
e339c80af95e14de3712d69ddea09a3868fa14cd ]
Currently we rely on the first byte of the Rx buffer to check if there's
any data available to be read. If the first byte of the received buffer
is zero (i.e. null character), then we fail to signal that data is
available even when it's available.
Instead introduce a boolean variable to track the data availability and
update it in the channel receive callback as ready and clear it when the
data is read.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhong Kaihua [Mon, 7 Aug 2017 14:51:56 +0000 (22:51 +0800)]
clk: hi3660: fix incorrect uart3 clock freqency
[ Upstream commit
d33fb1b9f0fcb67f2b9f8b1891465a088a9480f8 ]
UART3 clock rate is doubled in previous commit.
This error is not detected until recently a mezzanine board which makes
real use of uart3 port (through LS connector of 96boards) was setup
and tested on hi3660-hikey960 board.
This patch changes clock source rate of clk_factor_uart3 to
100000000.
Signed-off-by: Zhong Kaihua <zhongkaihua@huawei.com>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masahiro Yamada [Thu, 5 Oct 2017 02:32:59 +0000 (11:32 +0900)]
clk: uniphier: fix DAPLL2 clock rate of Pro5
[ Upstream commit
67affb78a4e4feb837953e3434c8402a5c3b272f ]
The parent of DAPLL2 should be DAPLL1. Fix the clock connection.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Sat, 11 Nov 2017 16:29:28 +0000 (17:29 +0100)]
clk: qcom: common: fix legacy board-clock registration
[ Upstream commit
43a51019cc8ff1b1cd2ba72e86563beb40d356fc ]
Make sure to search only the child nodes of "/clocks", rather than the
whole device-tree depth-first starting at "/clocks" when determining
whether to register a fixed clock in the legacy board-clock registration
helper.
Fixes:
ee15faffef11 ("clk: qcom: common: Add API to register board clocks backwards compatibly")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mylene JOSSERAND [Sun, 5 Nov 2017 16:51:34 +0000 (17:51 +0100)]
clk: sunxi-ng: a83t: Fix i2c buses bits
[ Upstream commit
cc54c0955d6f8618a38a999eecdc3d95306b90de ]
i2c1 and i2c2 bits for CCU are not bit 0 but bit 1 and bit 2.
Because of that, the i2c0 (bit 0) was not correctly configured.
Fixed the correct bits for i2c1 and i2c2.
Fixes:
05359be1176b ("clk: sunxi-ng: Add driver for A83T CCU")
Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gabriel Fernandez [Wed, 11 Oct 2017 06:57:24 +0000 (08:57 +0200)]
clk: stm32h7: fix test of clock config
[ Upstream commit
c1ea839c41d049604a3f64ef72712d1c7c6639d0 ]
fix test of composite clock config (bad copy / past)
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Fixes:
3e4d618b0722 ("clk: stm32h7: Add stm32h743 clock driver")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Wed, 15 Nov 2017 01:15:50 +0000 (17:15 -0800)]
bpf: fix lockdep splat
[ Upstream commit
89ad2fa3f043a1e8daae193bcb5fe34d5f8caf28 ]
pcpu_freelist_pop() needs the same lockdep awareness than
pcpu_freelist_populate() to avoid a false positive.
[ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ]
switchto-defaul/12508 [HC0[0]:SC0[6]:HE0:SE0] is trying to acquire:
(&htab->buckets[i].lock){......}, at: [<
ffffffff9dc099cb>] __htab_percpu_map_update_elem+0x1cb/0x300
and this task is already holding:
(dev_queue->dev->qdisc_class ?: &qdisc_tx_lock#2){+.-...}, at: [<
ffffffff9e135848>] __dev_queue_xmit+0
x868/0x1240
which would create a new lock dependency:
(dev_queue->dev->qdisc_class ?: &qdisc_tx_lock#2){+.-...} -> (&htab->buckets[i].lock){......}
but this new dependency connects a SOFTIRQ-irq-safe lock:
(dev_queue->dev->qdisc_class ?: &qdisc_tx_lock#2){+.-...}
... which became SOFTIRQ-irq-safe at:
[<
ffffffff9db5931b>] __lock_acquire+0x42b/0x1f10
[<
ffffffff9db5b32c>] lock_acquire+0xbc/0x1b0
[<
ffffffff9da05e38>] _raw_spin_lock+0x38/0x50
[<
ffffffff9e135848>] __dev_queue_xmit+0x868/0x1240
[<
ffffffff9e136240>] dev_queue_xmit+0x10/0x20
[<
ffffffff9e1965d9>] ip_finish_output2+0x439/0x590
[<
ffffffff9e197410>] ip_finish_output+0x150/0x2f0
[<
ffffffff9e19886d>] ip_output+0x7d/0x260
[<
ffffffff9e19789e>] ip_local_out+0x5e/0xe0
[<
ffffffff9e197b25>] ip_queue_xmit+0x205/0x620
[<
ffffffff9e1b8398>] tcp_transmit_skb+0x5a8/0xcb0
[<
ffffffff9e1ba152>] tcp_write_xmit+0x242/0x1070
[<
ffffffff9e1baffc>] __tcp_push_pending_frames+0x3c/0xf0
[<
ffffffff9e1b3472>] tcp_rcv_established+0x312/0x700
[<
ffffffff9e1c1acc>] tcp_v4_do_rcv+0x11c/0x200
[<
ffffffff9e1c3dc2>] tcp_v4_rcv+0xaa2/0xc30
[<
ffffffff9e191107>] ip_local_deliver_finish+0xa7/0x240
[<
ffffffff9e191a36>] ip_local_deliver+0x66/0x200
[<
ffffffff9e19137d>] ip_rcv_finish+0xdd/0x560
[<
ffffffff9e191e65>] ip_rcv+0x295/0x510
[<
ffffffff9e12ff88>] __netif_receive_skb_core+0x988/0x1020
[<
ffffffff9e130641>] __netif_receive_skb+0x21/0x70
[<
ffffffff9e1306ff>] process_backlog+0x6f/0x230
[<
ffffffff9e132129>] net_rx_action+0x229/0x420
[<
ffffffff9da07ee8>] __do_softirq+0xd8/0x43d
[<
ffffffff9e282bcc>] do_softirq_own_stack+0x1c/0x30
[<
ffffffff9dafc2f5>] do_softirq+0x55/0x60
[<
ffffffff9dafc3a8>] __local_bh_enable_ip+0xa8/0xb0
[<
ffffffff9db4c727>] cpu_startup_entry+0x1c7/0x500
[<
ffffffff9daab333>] start_secondary+0x113/0x140
to a SOFTIRQ-irq-unsafe lock:
(&head->lock){+.+...}
... which became SOFTIRQ-irq-unsafe at:
... [<
ffffffff9db5971f>] __lock_acquire+0x82f/0x1f10
[<
ffffffff9db5b32c>] lock_acquire+0xbc/0x1b0
[<
ffffffff9da05e38>] _raw_spin_lock+0x38/0x50
[<
ffffffff9dc0b7fa>] pcpu_freelist_pop+0x7a/0xb0
[<
ffffffff9dc08b2c>] htab_map_alloc+0x50c/0x5f0
[<
ffffffff9dc00dc5>] SyS_bpf+0x265/0x1200
[<
ffffffff9e28195f>] entry_SYSCALL_64_fastpath+0x12/0x17
other info that might help us debug this:
Chain exists of:
dev_queue->dev->qdisc_class ?: &qdisc_tx_lock#2 --> &htab->buckets[i].lock --> &head->lock
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&head->lock);
local_irq_disable();
lock(dev_queue->dev->qdisc_class ?: &qdisc_tx_lock#2);
lock(&htab->buckets[i].lock);
<Interrupt>
lock(dev_queue->dev->qdisc_class ?: &qdisc_tx_lock#2);
*** DEADLOCK ***
Fixes:
e19494edab82 ("bpf: introduce percpu_freelist")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hangbin Liu [Wed, 15 Nov 2017 01:43:09 +0000 (09:43 +0800)]
geneve: fix fill_info when link down
[ Upstream commit
fd7eafd02121d6ef501ef1a4a891e6061366c952 ]
geneve->sock4/6 were added with geneve_open and released with geneve_stop.
So when geneve link down, we will not able to show remote address and
checksum info after commit
11387fe4a98 ("geneve: fix fill_info when using
collect_metadata").
Fix this by avoid passing *_REMOTE{,6} for COLLECT_METADATA since they are
mutually exclusive, and always show UDP_ZERO_CSUM6_RX info.
Fixes:
11387fe4a98 ("geneve: fix fill_info when using collect_metadata")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeff Layton [Tue, 14 Nov 2017 19:43:56 +0000 (14:43 -0500)]
fcntl: don't leak fd reference when fixup_compat_flock fails
[ Upstream commit
9280a601e6080c9ff658468c1c775ff6514099a6 ]
Currently we just return err here, but we need to put the fd reference
first.
Fixes:
94073ad77fff (fs/locks: don't mess with the address limit in compat_fcntl64)
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xin Long [Wed, 15 Nov 2017 08:57:26 +0000 (16:57 +0800)]
sctp: use the right sk after waking up from wait_buf sleep
[ Upstream commit
cea0cc80a6777beb6eb643d4ad53690e1ad1d4ff ]
Commit
dfcb9f4f99f1 ("sctp: deny peeloff operation on asocs with threads
sleeping on it") fixed the race between peeloff and wait sndbuf by
checking waitqueue_active(&asoc->wait) in sctp_do_peeloff().
But it actually doesn't work, as even if waitqueue_active returns false
the waiting sndbuf thread may still not yet hold sk lock. After asoc is
peeled off, sk is not asoc->base.sk any more, then to hold the old sk
lock couldn't make assoc safe to access.
This patch is to fix this by changing to hold the new sk lock if sk is
not asoc->base.sk, meanwhile, also set the sk in sctp_sendmsg with the
new sk.
With this fix, there is no more race between peeloff and waitbuf, the
check 'waitqueue_active' in sctp_do_peeloff can be removed.
Thanks Marcelo and Neil for making this clear.
v1->v2:
fix it by changing to lock the new sock instead of adding a flag in asoc.
Suggested-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xin Long [Wed, 15 Nov 2017 08:55:54 +0000 (16:55 +0800)]
sctp: do not free asoc when it is already dead in sctp_sendmsg
[ Upstream commit
ca3af4dd28cff4e7216e213ba3b671fbf9f84758 ]
Now in sctp_sendmsg sctp_wait_for_sndbuf could schedule out without
holding sock sk. It means the current asoc can be freed elsewhere,
like when receiving an abort packet.
If the asoc is just created in sctp_sendmsg and sctp_wait_for_sndbuf
returns err, the asoc will be freed again due to new_asoc is not nil.
An use-after-free issue would be triggered by this.
This patch is to fix it by setting new_asoc with nil if the asoc is
already dead when cpu schedules back, so that it will not be freed
again in sctp_sendmsg.
v1->v2:
set new_asoc as nil in sctp_sendmsg instead of sctp_wait_for_sndbuf.
Suggested-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miles Chen [Thu, 16 Nov 2017 01:32:25 +0000 (17:32 -0800)]
slub: fix sysfs duplicate filename creation when slub_debug=O
[ Upstream commit
11066386efa692f77171484c32ea30f6e5a0d729 ]
When slub_debug=O is set. It is possible to clear debug flags for an
"unmergeable" slab cache in kmem_cache_open(). It makes the "unmergeable"
cache became "mergeable" in sysfs_slab_add().
These caches will generate their "unique IDs" by create_unique_id(), but
it is possible to create identical unique IDs. In my experiment,
sgpool-128, names_cache, biovec-256 generate the same ID ":Ft-
0004096" and
the kernel reports "sysfs: cannot create duplicate filename
'/kernel/slab/:Ft-
0004096'".
To repeat my experiment, set disable_higher_order_debug=1,
CONFIG_SLUB_DEBUG_ON=y in kernel-4.14.
Fix this issue by setting unmergeable=1 if slub_debug=O and the the
default slub_debug contains any no-merge flags.
call path:
kmem_cache_create()
__kmem_cache_alias() -> we set SLAB_NEVER_MERGE flags here
create_cache()
__kmem_cache_create()
kmem_cache_open() -> clear DEBUG_METADATA_FLAGS
sysfs_slab_add() -> the slab cache is mergeable now
sysfs: cannot create duplicate filename '/kernel/slab/:Ft-
0004096'
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x60/0x7c
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W
4.14.0-rc7ajb-00131-gd4c2e9f-dirty #123
Hardware name: linux,dummy-virt (DT)
task:
ffffffc07d4e0080 task.stack:
ffffff8008008000
PC is at sysfs_warn_dup+0x60/0x7c
LR is at sysfs_warn_dup+0x60/0x7c
pc : lr : pstate:
60000145
Call trace:
sysfs_warn_dup+0x60/0x7c
sysfs_create_dir_ns+0x98/0xa0
kobject_add_internal+0xa0/0x294
kobject_init_and_add+0x90/0xb4
sysfs_slab_add+0x90/0x200
__kmem_cache_create+0x26c/0x438
kmem_cache_create+0x164/0x1f4
sg_pool_init+0x60/0x100
do_one_initcall+0x38/0x12c
kernel_init_freeable+0x138/0x1d4
kernel_init+0x10/0xfc
ret_from_fork+0x10/0x18
Link: http://lkml.kernel.org/r/1510365805-5155-1-git-send-email-miles.chen@mediatek.com
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergey Senozhatsky [Thu, 16 Nov 2017 01:34:03 +0000 (17:34 -0800)]
zsmalloc: calling zs_map_object() from irq is a bug
[ Upstream commit
1aedcafbf32b3f232c159b14cd0d423fcfe2b861 ]
Use BUG_ON(in_interrupt()) in zs_map_object(). This is not a new
BUG_ON(), it's always been there, but was recently changed to
VM_BUG_ON(). There are several problems there. First, we use use
per-CPU mappings both in zsmalloc and in zram, and interrupt may easily
corrupt those buffers. Second, and more importantly, we believe it's
possible to start leaking sensitive information. Consider the following
case:
-> process P
swap out
zram
per-cpu mapping CPU1
compress page A
-> IRQ
swap out
zram
per-cpu mapping CPU1
compress page B
write page from per-cpu mapping CPU1 to zsmalloc pool
iret
-> process P
write page from per-cpu mapping CPU1 to zsmalloc pool [*]
return
* so we store overwritten data that actually belongs to another
page (task) and potentially contains sensitive data. And when
process P will page fault it's going to read (swap in) that
other task's data.
Link: http://lkml.kernel.org/r/20170929045140.4055-1-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Tatashin [Thu, 16 Nov 2017 01:36:18 +0000 (17:36 -0800)]
sparc64/mm: set fields in deferred pages
[ Upstream commit
2a20aa171071a334d80c4e5d5af719d8374702fc ]
Without deferred struct page feature (CONFIG_DEFERRED_STRUCT_PAGE_INIT),
flags and other fields in "struct page"es are never changed prior to
first initializing struct pages by going through __init_single_page().
With deferred struct page feature enabled there is a case where we set
some fields prior to initializing:
mem_init() {
register_page_bootmem_info();
free_all_bootmem();
...
}
When register_page_bootmem_info() is called only non-deferred struct
pages are initialized. But, this function goes through some reserved
pages which might be part of the deferred, and thus are not yet
initialized.
mem_init
register_page_bootmem_info
register_page_bootmem_info_node
get_page_bootmem
.. setting fields here ..
such as: page->freelist = (void *)type;
free_all_bootmem()
free_low_memory_core_early()
for_each_reserved_mem_region()
reserve_bootmem_region()
init_reserved_page() <- Only if this is deferred reserved page
__init_single_pfn()
__init_single_page()
memset(0) <-- Loose the set fields here
We end up with similar issue as in the previous patch, where currently
we do not observe problem as memory is zeroed. But, if flag asserts are
changed we can start hitting issues.
Also, because in this patch series we will stop zeroing struct page
memory during allocation, we must make sure that struct pages are
properly initialized prior to using them.
The deferred-reserved pages are initialized in free_all_bootmem().
Therefore, the fix is to switch the above calls.
Link: http://lkml.kernel.org/r/20171013173214.27300-4-pasha.tatashin@oracle.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ming Lei [Thu, 16 Nov 2017 00:08:44 +0000 (08:08 +0800)]
block: wake up all tasks blocked in get_request()
[ Upstream commit
34d9715ac1edd50285168dd8d80c972739a4f6a4 ]
Once blk_set_queue_dying() is done in blk_cleanup_queue(), we call
blk_freeze_queue() and wait for q->q_usage_counter becoming zero. But
if there are tasks blocked in get_request(), q->q_usage_counter can
never become zero. So we have to wake up all these tasks in
blk_set_queue_dying() first.
Fixes:
3ef28e83ab157997 ("block: generic request_queue reference counting")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Thu, 9 Nov 2017 17:07:17 +0000 (18:07 +0100)]
dt-bindings: usb: fix reg-property port-number range
[ Upstream commit
f42ae7b0540937e00fe005812997f126aaac4bc2 ]
The USB hub port-number range for USB 2.0 is 1-255 and not 1-31 which
reflects an arbitrary limit set by the current Linux implementation.
Note that for USB 3.1 hubs the valid range is 1-15.
Increase the documented valid range in the binding to 255, which is the
maximum allowed by the specifications.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Darrick J. Wong [Wed, 15 Nov 2017 00:34:44 +0000 (16:34 -0800)]
xfs: fix forgotten rcu read unlock when skipping inode reclaim
[ Upstream commit
962cc1ad6caddb5abbb9f0a43e5abe7131a71f18 ]
In commit
f2e9ad21 ("xfs: check for race with xfs_reclaim_inode"), we
skip an inode if we're racing with freeing the inode via
xfs_reclaim_inode, but we forgot to release the rcu read lock when
dumping the inode, with the result that we exit to userspace with a lock
held. Don't do that; generic/320 with a 1k block size fails this
very occasionally.
================================================
WARNING: lock held when returning to user space!
4.14.0-rc6-djwong #4 Tainted: G W
------------------------------------------------
rm/30466 is leaving the kernel with locks still held!
1 lock held by rm/30466:
#0: (rcu_read_lock){....}, at: [<
ffffffffa01364d3>] xfs_ifree_cluster.isra.17+0x2c3/0x6f0 [xfs]
------------[ cut here ]------------
WARNING: CPU: 1 PID: 30466 at kernel/rcu/tree_plugin.h:329 rcu_note_context_switch+0x71/0x700
Modules linked in: deadline_iosched dm_snapshot dm_bufio ext4 mbcache jbd2 dm_flakey xfs libcrc32c dax_pmem device_dax nd_pmem sch_fq_codel af_packet [last unloaded: scsi_debug]
CPU: 1 PID: 30466 Comm: rm Tainted: G W 4.14.0-rc6-djwong #4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1djwong0 04/01/2014
task:
ffff880037680000 task.stack:
ffffc90001064000
RIP: 0010:rcu_note_context_switch+0x71/0x700
RSP: 0000:
ffffc90001067e50 EFLAGS:
00010002
RAX:
0000000000000001 RBX:
ffff880037680000 RCX:
ffff88003e73d200
RDX:
0000000000000002 RSI:
ffffffff819e53e9 RDI:
ffffffff819f4375
RBP:
0000000000000000 R08:
0000000000000000 R09:
ffff880062c900d0
R10:
0000000000000000 R11:
0000000000000000 R12:
ffff880037680000
R13:
0000000000000000 R14:
ffffc90001067eb8 R15:
ffff880037680690
FS:
00007fa3b8ce8700(0000) GS:
ffff88003ec00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007f69bf77c000 CR3:
000000002450a000 CR4:
00000000000006e0
Call Trace:
__schedule+0xb8/0xb10
schedule+0x40/0x90
exit_to_usermode_loop+0x6b/0xa0
prepare_exit_to_usermode+0x7a/0x90
retint_user+0x8/0x20
RIP: 0033:0x7fa3b87fda87
RSP: 002b:
00007ffe41206568 EFLAGS:
00000246 ORIG_RAX:
ffffffffffffff02
RAX:
0000000000000000 RBX:
00000000010e88c0 RCX:
00007fa3b87fda87
RDX:
0000000000000000 RSI:
00000000010e89c8 RDI:
0000000000000005
RBP:
0000000000000000 R08:
0000000000000003 R09:
0000000000000000
R10:
000000000000015e R11:
0000000000000246 R12:
00000000010c8060
R13:
00007ffe41206690 R14:
0000000000000000 R15:
0000000000000000
---[ end trace
e88f83bf0cfbd07d ]---
Fixes:
f2e9ad212def50bcf4c098c6288779dd97fff0f0
Cc: Omar Sandoval <osandov@fb.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pieter Jansen van Vuuren [Fri, 17 Nov 2017 01:06:39 +0000 (17:06 -0800)]
nfp: fix flower offload metadata flag usage
[ Upstream commit
6c3ab204f4ca00374a374bc0fc9a275b64d1bcbb ]
Hardware has no notion of new or last mask id, instead it makes use of the
message type (i.e. add flow or del flow) in combination with a single bit
in metadata flags to determine when to add or delete a mask id. Previously
we made use of the new or last flags to indicate that a new mask should be
allocated or deallocated, respectively. This incorrect behaviour is fixed
by making use single bit in metadata flags to indicate mask allocation or
deallocation.
Fixes:
43f84b72c50d ("nfp: add metadata to each flow offload")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dirk van der Merwe [Fri, 17 Nov 2017 01:06:41 +0000 (17:06 -0800)]
nfp: inherit the max_mtu from the PF netdev
[ Upstream commit
743ba5b47f7961fb29f2e06bb694fb4f068ac58f ]
The PF netdev is used for data transfer for reprs, so reprs inherit the
maximum MTU settings of the PF netdev.
Fixes:
5de73ee46704 ("nfp: general representor implementation")
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chuck Lever [Fri, 3 Nov 2017 17:46:06 +0000 (13:46 -0400)]
sunrpc: Fix rpc_task_begin trace point
[ Upstream commit
b2bfe5915d5fe7577221031a39ac722a0a2a1199 ]
The rpc_task_begin trace point always display a task ID of zero.
Move the trace point call site so that it picks up the new task ID.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trond Myklebust [Mon, 6 Nov 2017 20:28:04 +0000 (15:28 -0500)]
NFS: Fix a typo in nfs_rename()
[ Upstream commit
d803224c84be067754db7fa58a93f36f61566493 ]
On successful rename, the "old_dentry" is retained and is attached to
the "new_dir", so we need to call nfs_set_verifier() accordingly.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Randy Dunlap [Fri, 17 Nov 2017 23:27:35 +0000 (15:27 -0800)]
dynamic-debug-howto: fix optional/omitted ending line number to be LARGE instead of 0
[ Upstream commit
1f3c790bd5989fcfec9e53ad8fa09f5b740c958f ]
line-range is supposed to treat "1-" as "1-endoffile", so
handle the special case by setting last_lineno to UINT_MAX.
Fixes this error:
dynamic_debug:ddebug_parse_query: last-line:0 < 1st-line:1
dynamic_debug:ddebug_exec_query: query parse failed
Link: http://lkml.kernel.org/r/10a6a101-e2be-209f-1f41-54637824788e@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Bates [Fri, 17 Nov 2017 23:28:16 +0000 (15:28 -0800)]
lib/genalloc.c: make the avail variable an atomic_long_t
[ Upstream commit
36a3d1dd4e16bcd0d2ddfb4a2ec7092f0ae0d931 ]
If the amount of resources allocated to a gen_pool exceeds 2^32 then the
avail atomic overflows and this causes problems when clients try and
borrow resources from the pool. This is only expected to be an issue on
64 bit systems.
Add the <linux/atomic.h> header to pull in atomic_long* operations. So
that 32 bit systems continue to use atomic32_t but 64 bit systems can
use atomic64_t.
Link: http://lkml.kernel.org/r/1509033843-25667-1-git-send-email-sbates@raithlin.com
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Daniel Mentz <danielmentz@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joe Lawrence [Fri, 17 Nov 2017 23:29:17 +0000 (15:29 -0800)]
pipe: match pipe_max_size data type with procfs
[ Upstream commit
98159d977f71c3b3dee898d1c34e56f520b094e7 ]
Patch series "A few round_pipe_size() and pipe-max-size fixups", v3.
While backporting Michael's "pipe: fix limit handling" patchset to a
distro-kernel, Mikulas noticed that current upstream pipe limit handling
contains a few problems:
1 - procfs signed wrap: echo'ing a large number into
/proc/sys/fs/pipe-max-size and then cat'ing it back out shows a
negative value.
2 - round_pipe_size() nr_pages overflow on 32bit: this would
subsequently try roundup_pow_of_two(0), which is undefined.
3 - visible non-rounded pipe-max-size value: there is no mutual
exclusion or protection between the time pipe_max_size is assigned
a raw value from proc_dointvec_minmax() and when it is rounded.
4 - unsigned long -> unsigned int conversion makes for potential odd
return errors from do_proc_douintvec_minmax_conv() and
do_proc_dopipe_max_size_conv().
This version underwent the same testing as v1:
https://marc.info/?l=linux-kernel&m=
150643571406022&w=2
This patch (of 4):
pipe_max_size is defined as an unsigned int:
unsigned int pipe_max_size =
1048576;
but its procfs/sysctl representation is an integer:
static struct ctl_table fs_table[] = {
...
{
.procname = "pipe-max-size",
.data = &pipe_max_size,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &pipe_proc_fn,
.extra1 = &pipe_min_size,
},
...
that is signed:
int pipe_proc_fn(struct ctl_table *table, int write, void __user *buf,
size_t *lenp, loff_t *ppos)
{
...
ret = proc_dointvec_minmax(table, write, buf, lenp, ppos)
This leads to signed results via procfs for large values of pipe_max_size:
% echo
2147483647 >/proc/sys/fs/pipe-max-size
% cat /proc/sys/fs/pipe-max-size
-
2147483648
Use unsigned operations on this variable to avoid such negative values.
Link: http://lkml.kernel.org/r/1507658689-11669-2-git-send-email-joe.lawrence@redhat.com
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe JAILLET [Fri, 17 Nov 2017 23:37:57 +0000 (15:37 -0800)]
drivers/rapidio/devices/rio_mport_cdev.c: fix resource leak in error handling path in 'rio_dma_transfer()'
[ Upstream commit
b1402dcb5643b7a27d46a05edd7491d49ba0e248 ]
If 'dma_map_sg()', we should branch to the existing error handling path
to free some resources before returning.
Link: http://lkml.kernel.org/r/61292a4f369229eee03394247385e955027283f8.1505687047.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Christian K_nig <christian.koenig@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Thu, 16 Nov 2017 17:39:18 +0000 (17:39 +0000)]
rsi: fix memory leak on buf and usb_reg_buf
[ Upstream commit
d35ef8f846c72d84bfccf239c248c84f79c3a7e8 ]
In the cases where len is too long, the error return path fails to
kfree allocated buffers buf and usb_reg_buf. The simplest fix is to
perform the sanity check on len before the allocations to avoid having
to do the kfree'ing in the first place.
Detected by CoverityScan, CID#
1452258,
1452259 ("Resource Leak")
Fixes:
59f73e2ae185 ("rsi: check length before USB read/write register")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xin Long [Fri, 17 Nov 2017 06:27:06 +0000 (14:27 +0800)]
route: update fnhe_expires for redirect when the fnhe exists
[ Upstream commit
e39d5246111399dbc6e11cd39fd8580191b86c47 ]
Now when creating fnhe for redirect, it sets fnhe_expires for this
new route cache. But when updating the exist one, it doesn't do it.
It will cause this fnhe never to be expired.
Paolo already noticed it before, in Jianlin's test case, it became
even worse:
When ip route flush cache, the old fnhe is not to be removed, but
only clean it's members. When redirect comes again, this fnhe will
be found and updated, but never be expired due to fnhe_expires not
being set.
So fix it by simply updating fnhe_expires even it's for redirect.
Fixes:
aee06da6726d ("ipv4: use seqlock for nh_exceptions")
Reported-by: Jianlin Shi <jishi@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xin Long [Fri, 17 Nov 2017 06:27:18 +0000 (14:27 +0800)]
route: also update fnhe_genid when updating a route cache
[ Upstream commit
cebe84c6190d741045a322f5343f717139993c08 ]
Now when ip route flush cache and it turn out all fnhe_genid != genid.
If a redirect/pmtu icmp packet comes and the old fnhe is found and all
it's members but fnhe_genid will be updated.
Then next time when it looks up route and tries to rebind this fnhe to
the new dst, the fnhe will be flushed due to fnhe_genid != genid. It
causes this redirect/pmtu icmp packet acutally not to be applied.
This patch is to also reset fnhe_genid when updating a route cache.
Fixes:
5aad1de5ea2c ("ipv4: use separate genid for next hop exceptions")
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexey Kodanev [Fri, 17 Nov 2017 16:16:17 +0000 (19:16 +0300)]
gre6: use log_ecn_error module parameter in ip6_tnl_rcv()
[ Upstream commit
981542c526ecd846920bc500e9989da906ee9fb9 ]
After commit
308edfdf1563 ("gre6: Cleanup GREv6 receive path, call
common GRE functions") it's not used anywhere in the module, but
previously was used in ip6gre_rcv().
Fixes:
308edfdf1563 ("gre6: Cleanup GREv6 receive path, call common GRE functions")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Hutchings [Fri, 10 Nov 2017 18:48:50 +0000 (18:48 +0000)]
mac80211_hwsim: Fix memory leak in hwsim_new_radio_nl()
[ Upstream commit
67bd52386125ce1159c0581cbcd2740addf33cd4 ]
hwsim_new_radio_nl() now copies the name attribute in order to add a
null-terminator. mac80211_hwsim_new_radio() (indirectly) copies it
again into the net_device structure, so the first copy is not used or
freed later. Free the first copy before returning.
Fixes:
ff4dd73dd2b4 ("mac80211_hwsim: check HWSIM_ATTR_RADIO_NAME length")
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Hansen [Sat, 11 Nov 2017 00:12:29 +0000 (16:12 -0800)]
x86/mpx/selftests: Fix up weird arrays
[ Upstream commit
a6400120d042397675fcf694060779d21e9e762d ]
The MPX hardware data structurse are defined in a weird way: they define
their size in bytes and then union that with the type with which we want
to access them.
Yes, this is weird, but it does work. But, new GCC's complain that we
are accessing the array out of bounds. Just make it a zero-sized array
so gcc will stop complaining. There was not really a bug here.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171111001229.58A7933D@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Johansen [Wed, 15 Nov 2017 23:25:30 +0000 (15:25 -0800)]
apparmor: fix leak of null profile name if profile allocation fails
[ Upstream commit
4633307e5ed6128975595df43f796a10c41d11c1 ]
Fixes:
d07881d2edb0 ("apparmor: move new_null_profile to after profile lookup fns()")
Reported-by: Seth Arnold <seth.arnold@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Madhavan Srinivasan [Wed, 22 Nov 2017 05:15:38 +0000 (10:45 +0530)]
powerpc/perf: Fix pmu_count to count only nest imc pmus
[ Upstream commit
de34787f1096cce38e2590be0013b44418d14546 ]
"pmu_count" in opal_imc_counters_probe() is intended to hold
the number of successful nest imc pmu registerations. But
current code also counts other imc units like core_imc and
thread_imc. Patch add a check to count only nest imc pmus.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masahiro Yamada [Tue, 14 Nov 2017 11:38:07 +0000 (20:38 +0900)]
coccinelle: fix parallel build with CHECK=scripts/coccicheck
[ Upstream commit
d7059ca0147adcd495f3c5b41f260e1ac55bb679 ]
The command "make -j8 C=1 CHECK=scripts/coccicheck" produces
lots of "coccicheck failed" error messages.
Julia Lawall explained the Coccinelle behavior as follows:
"The problem on the Coccinelle side is that it uses a subdirectory
with the name of the semantic patch to store standard output and
standard error for the different threads. I didn't want to use a
name with the pid, so that one could easily find this information
while Coccinelle is running. Normally the subdirectory is cleaned
up when Coccinelle completes, so there is only one of them at a time.
Maybe it is best to just add the pid. There is the risk that these
subdirectories will accumulate if Coccinelle crashes in a way such
that they don't get cleaned up, but Coccinelle could print a warning
if it detects this case, rather than failing."
When scripts/coccicheck is used as CHECK tool and -j option is given
to Make, the whole of build process runs in parallel. So, multiple
processes try to get access to the same subdirectory.
I notice spatch creates the subdirectory only when it runs in parallel
(i.e. --jobs <N> is given and <N> is greater than 1).
Setting NPROC=1 is a reasonable solution; spatch does not create the
subdirectory. Besides, ONLINE=1 mode takes a single file input for
each spatch invocation, so there is no reason to parallelize it in
the first place.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masahiro Yamada [Wed, 15 Nov 2017 09:17:07 +0000 (18:17 +0900)]
kbuild: pkg: use --transform option to prefix paths in tar
[ Upstream commit
2dbc644ac62bbcb9ee78e84719953f611be0413d ]
For rpm-pkg and deb-pkg, a source tar file is created. All paths in
the archive must be prefixed with the base name of the tar so that
everything is contained in the directory when you extract it.
Currently, scripts/package/Makefile uses a symlink for that, and
removes it after the tar is created.
If you terminate the build during the tar creation, the symlink is
left over. Then, at the next package build, you will see a warning
like follows:
ln: '.' and 'kernel-4.14.0+/.' are the same file
It is possible to fix it by adding -n (--no-dereference) option to
the "ln" command, but a cleaner way is to use --transform option
of "tar" command. This option is GNU extension, but it should not
hurt to use it in the Linux build system.
The 'S' flag is needed to exclude symlinks from the path fixup.
Without it, symlinks in the kernel are broken.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ursula Braun [Tue, 21 Nov 2017 12:23:53 +0000 (13:23 +0100)]
net/smc: use sk_rcvbuf as start for rmb creation
[ Upstream commit
4e1061f4a2bba1669c7297455c73ddafbebf2b12 ]
Commit
3e034725c0d8 ("net/smc: common functions for RMBs and send buffers")
merged handling of SMC receive and send buffers. It introduced sk_buf_size
as merged start value for size determination. But since sk_buf_size is not
used at all, sk_sndbuf is erroneously used as start for rmb creation.
This patch makes sure, sk_buf_size is really used as intended, and
sk_rcvbuf is used as start value for rmb creation.
Fixes:
3e034725c0d8 ("net/smc: common functions for RMBs and send buffers")
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Reviewed-by: Hans Wippel <hwippel@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Fri, 17 Nov 2017 18:35:53 +0000 (18:35 +0000)]
irqchip/qcom: Fix u32 comparison with value less than zero
[ Upstream commit
e9990d70e8a063a7b894c5cbb99f630a0f41200d ]
The comparison of u32 nregs being less than zero is never true since
nregs is unsigned. Fix this by making nregs a signed integer.
Fixes:
f20cc9b00c7b ("irqchip/qcom: Add IRQ combiner driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: kernel-janitors@vger.kernel.org
Cc: Jason Cooper <jason@lakedaemon.net>
Link: https://lkml.kernel.org/r/20171117183553.2739-1-colin.king@canonical.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Russell King [Mon, 27 Nov 2017 11:22:42 +0000 (11:22 +0000)]
ARM: avoid faulting on qemu
commit
3aaf33bebda8d4ffcc0fc8ef39e6c1ac68823b11 upstream.
When qemu starts a kernel in a bare environment, the default SCR has
the AW and FW bits clear, which means that the kernel can't modify
the PSR A or PSR F bits, and means that FIQs and imprecise aborts are
always masked.
When running uboot under qemu, the AW and FW SCR bits are set, and the
kernel functions normally - and this is how real hardware behaves.
Fix this for qemu by ignoring the FIQ bit.
Fixes:
8bafae202c82 ("ARM: BUG if jumping to usermode address in kernel mode")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Alex Shi <alex.shi@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Russell King [Fri, 24 Nov 2017 23:49:34 +0000 (23:49 +0000)]
ARM: BUG if jumping to usermode address in kernel mode
commit
8bafae202c82dc257f649ea3c275a0f35ee15113 upstream.
Detect if we are returning to usermode via the normal kernel exit paths
but the saved PSR value indicates that we are in kernel mode. This
could occur due to corrupted stack state, which has been observed with
"ftracetest".
This ensures that we catch the problem case before we get to user code.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Alex Shi <alex.shi@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LEROY Christophe [Fri, 6 Oct 2017 13:04:43 +0000 (15:04 +0200)]
crypto: talitos - fix ctr-aes-talitos
commit
70d355ccea899dad47dc22d3a4406998f55143fd upstream.
ctr-aes-talitos test fails as follows on SEC2
[ 0.837427] alg: skcipher: Test 1 failed (invalid result) on encryption for ctr-aes-talitos
[ 0.845763]
00000000: 16 36 d5 ee 34 f8 06 25 d7 7f 8e 56 ca 88 43 45
[ 0.852345]
00000010: f9 3f f7 17 2a b2 12 23 30 43 09 15 82 dd e1 97
[ 0.858940]
00000020: a7 f7 32 b5 eb 25 06 13 9a ec f5 29 25 f8 4d 66
[ 0.865366]
00000030: b0 03 5b 8e aa 9a 42 b6 19 33 8a e2 9d 65 96 95
This patch fixes the descriptor type which is special for CTR AES
Fixes:
5e75ae1b3cef6 ("crypto: talitos - add new crypto modes")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LEROY Christophe [Fri, 6 Oct 2017 13:04:41 +0000 (15:04 +0200)]
crypto: talitos - fix use of sg_link_tbl_len
commit
fbb22137c4d9bab536958b152d096fb3f98020ea upstream.
sg_link_tbl_len shall be used instead of cryptlen, otherwise
SECs which perform HW CICV verification will fail.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LEROY Christophe [Fri, 6 Oct 2017 13:04:39 +0000 (15:04 +0200)]
crypto: talitos - fix AEAD for sha224 on non sha224 capable chips
commit
6cda075aff67a1b9b5ba1b2818091dc939643b6c upstream.
sha224 AEAD test fails with:
[ 2.803125] talitos
ff020000.crypto: DEUISR 0x00000000_00000000
[ 2.808743] talitos
ff020000.crypto: MDEUISR 0x80100000_00000000
[ 2.814678] talitos
ff020000.crypto: DESCBUF 0x20731f21_00000018
[ 2.820616] talitos
ff020000.crypto: DESCBUF 0x0628d64c_00000010
[ 2.826554] talitos
ff020000.crypto: DESCBUF 0x0631005c_00000018
[ 2.832492] talitos
ff020000.crypto: DESCBUF 0x0628d664_00000008
[ 2.838430] talitos
ff020000.crypto: DESCBUF 0x061b13a0_00000080
[ 2.844369] talitos
ff020000.crypto: DESCBUF 0x0631006c_00000080
[ 2.850307] talitos
ff020000.crypto: DESCBUF 0x0631006c_00000018
[ 2.856245] talitos
ff020000.crypto: DESCBUF 0x063100ec_00000000
[ 2.884972] talitos
ff020000.crypto: failed to reset channel 0
[ 2.890503] talitos
ff020000.crypto: done overflow, internal time out, or rngu error: ISR 0x20000000_00020000
[ 2.900652] alg: aead: encryption failed on test 1 for authenc-hmac-sha224-cbc-3des-talitos: ret=22
This is due to SHA224 not being supported by the HW. Allthough for
hash we are able to init the hash context by SW, it is not
possible for AEAD. Therefore SHA224 AEAD has to be deactivated.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LEROY Christophe [Fri, 6 Oct 2017 13:04:37 +0000 (15:04 +0200)]
crypto: talitos - fix setkey to check key weakness
commit
f384cdc4faf350fdb6ad93c5f26952b9ba7c7566 upstream.
Crypto manager test report the following failures:
[ 3.061081] alg: skcipher: setkey failed on test 5 for ecb-des-talitos: flags=100
[ 3.069342] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-talitos: flags=100
[ 3.077754] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-talitos: flags=100
This is due to setkey being expected to detect weak keys.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LEROY Christophe [Fri, 6 Oct 2017 13:04:35 +0000 (15:04 +0200)]
crypto: talitos - fix memory corruption on SEC2
commit
e04a61bebc5da1535b6f194b464295b8d558e2fc upstream.
On SEC2, when using the old descriptors type (hmac snoop no afeu)
for doing IPsec, the CICV out pointeur points out of the allocated
memory.
[ 2.502554] =============================================================================
[ 2.510740] BUG dma-kmalloc-256 (Not tainted): Redzone overwritten
[ 2.516907] -----------------------------------------------------------------------------
[ 2.516907]
[ 2.526535] Disabling lock debugging due to kernel taint
[ 2.531845] INFO: 0xde858108-0xde85810b. First byte 0xf8 instead of 0xcc
[ 2.538549] INFO: Allocated in 0x806181a9 age=0 cpu=0 pid=58
[ 2.544229] __kmalloc+0x374/0x564
[ 2.547649] talitos_edesc_alloc+0x17c/0x48c
[ 2.551929] aead_edesc_alloc+0x80/0x154
[ 2.555863] aead_encrypt+0x30/0xe0
[ 2.559368] __test_aead+0x5a0/0x1f3c
[ 2.563042] test_aead+0x2c/0x110
[ 2.566371] alg_test_aead+0x5c/0xf4
[ 2.569958] alg_test+0x1dc/0x5a0
[ 2.573305] cryptomgr_test+0x50/0x70
[ 2.576984] kthread+0xd8/0x134
[ 2.580155] ret_from_kernel_thread+0x5c/0x64
[ 2.584534] INFO: Freed in ipsec_esp_encrypt_done+0x130/0x240 age=6 cpu=0 pid=0
[ 2.591839] ipsec_esp_encrypt_done+0x130/0x240
[ 2.596395] flush_channel+0x1dc/0x488
[ 2.600161] talitos2_done_4ch+0x30/0x200
[ 2.604185] tasklet_action+0xa0/0x13c
[ 2.607948] __do_softirq+0x148/0x6cc
[ 2.611623] irq_exit+0xc0/0x124
[ 2.614869] call_do_irq+0x24/0x3c
[ 2.618292] do_IRQ+0x78/0x108
[ 2.621369] ret_from_except+0x0/0x14
[ 2.625055] finish_task_switch+0x58/0x350
[ 2.629165] schedule+0x80/0x134
[ 2.632409] schedule_preempt_disabled+0x38/0xc8
[ 2.637042] cpu_startup_entry+0xe4/0x190
[ 2.641074] start_kernel+0x3f4/0x408
[ 2.644741] 0x3438
[ 2.646857] INFO: Slab 0xdffbdb00 objects=9 used=1 fp=0xde8581c0 flags=0x0080
[ 2.653978] INFO: Object 0xde858008 @offset=8 fp=0xca4395df
[ 2.653978]
[ 2.661032] Redzone
de858000: cc cc cc cc cc cc cc cc ........
[ 2.669029] Object
de858008: 00 00 00 02 00 00 00 02 00 6b 6b 6b 1e 83 ea 28 .........kkk...(
[ 2.677628] Object
de858018: 00 00 00 70 1e 85 80 64 ff 73 1d 21 6b 6b 6b 6b ...p...d.s.!kkkk
[ 2.686228] Object
de858028: 00 20 00 00 1e 84 17 24 00 10 00 00 1e 85 70 00 . .....$......p.
[ 2.694829] Object
de858038: 00 18 00 00 1e 84 17 44 00 08 00 00 1e 83 ea 28 .......D.......(
[ 2.703430] Object
de858048: 00 80 00 00 1e 84 f0 00 00 80 00 00 1e 85 70 10 ..............p.
[ 2.712030] Object
de858058: 00 20 6b 00 1e 85 80 f4 6b 6b 6b 6b 00 80 02 00 . k.....kkkk....
[ 2.720629] Object
de858068: 1e 84 f0 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b ....kkkkkkkkkkkk
[ 2.729230] Object
de858078: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[ 2.737830] Object
de858088: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[ 2.746429] Object
de858098: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[ 2.755029] Object
de8580a8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[ 2.763628] Object
de8580b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[ 2.772229] Object
de8580c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[ 2.780829] Object
de8580d8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[ 2.789430] Object
de8580e8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 73 b0 ea 9f kkkkkkkkkkkks...
[ 2.798030] Object
de8580f8: e8 18 80 d6 56 38 44 c0 db e3 4f 71 f7 ce d1 d3 ....V8D...Oq....
[ 2.806629] Redzone
de858108: f8 bd 3e 4f ..>O
[ 2.814279] Padding
de8581b0: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ
[ 2.822283] CPU: 0 PID: 0 Comm: swapper Tainted: G B
4.9.50-g995be12679 #179
[ 2.831819] Call Trace:
[ 2.834301] [
dffefd20] [
c01aa9a8] check_bytes_and_report+0x100/0x194 (unreliable)
[ 2.841801] [
dffefd50] [
c01aac3c] check_object+0x200/0x530
[ 2.847306] [
dffefd80] [
c01ae584] free_debug_processing+0x290/0x690
[ 2.853585] [
dffefde0] [
c01aec8c] __slab_free+0x308/0x628
[ 2.859000] [
dffefe80] [
c05057f4] ipsec_esp_encrypt_done+0x130/0x240
[ 2.865378] [
dffefeb0] [
c05002c4] flush_channel+0x1dc/0x488
[ 2.870968] [
dffeff10] [
c05007a8] talitos2_done_4ch+0x30/0x200
[ 2.876814] [
dffeff30] [
c002fe38] tasklet_action+0xa0/0x13c
[ 2.882399] [
dffeff60] [
c002f118] __do_softirq+0x148/0x6cc
[ 2.887896] [
dffeffd0] [
c002f954] irq_exit+0xc0/0x124
[ 2.892968] [
dffefff0] [
c0013adc] call_do_irq+0x24/0x3c
[ 2.898213] [
c0d4be00] [
c000757c] do_IRQ+0x78/0x108
[ 2.903113] [
c0d4be30] [
c0015c08] ret_from_except+0x0/0x14
[ 2.908634] --- interrupt: 501 at finish_task_switch+0x70/0x350
[ 2.908634] LR = finish_task_switch+0x58/0x350
[ 2.919327] [
c0d4bf20] [
c085e1d4] schedule+0x80/0x134
[ 2.924398] [
c0d4bf50] [
c085e2c0] schedule_preempt_disabled+0x38/0xc8
[ 2.930853] [
c0d4bf60] [
c007f064] cpu_startup_entry+0xe4/0x190
[ 2.936707] [
c0d4bfb0] [
c096c434] start_kernel+0x3f4/0x408
[ 2.942198] [
c0d4bff0] [
00003438] 0x3438
[ 2.946137] FIX dma-kmalloc-256: Restoring 0xde858108-0xde85810b=0xcc
[ 2.946137]
[ 2.954158] FIX dma-kmalloc-256: Object at 0xde858008 not freed
This patch reworks the handling of the CICV out in order
to properly handle all cases.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LEROY Christophe [Fri, 6 Oct 2017 13:04:33 +0000 (15:04 +0200)]
crypto: talitos - fix AEAD test failures
commit
ec8c7d14acc0a477429d3a6fade5dab72c996c82 upstream.
AEAD tests fail when destination SG list has more than 1 element.
[ 2.058752] alg: aead: Test 1 failed on encryption for authenc-hmac-sha1-cbc-aes-talitos
[ 2.066965]
00000000: 53 69 6e 67 6c 65 20 62 6c 6f 63 6b 20 6d 73 67
00000010: c0 43 ff 74 c0 43 ff e0 de 83 d1 20 de 84 8e 54
00000020: de 83 d7 c4
[ 2.082138] alg: aead: Test 1 failed on encryption for authenc-hmac-sha1-cbc-aes-talitos
[ 2.090435]
00000000: 53 69 6e 67 6c 65 20 62 6c 6f 63 6b 20 6d 73 67
00000010: de 84 ea 58 c0 93 1a 24 de 84 e8 59 de 84 f1 20
00000020: 00 00 00 00
[ 2.105721] alg: aead: Test 1 failed on encryption for authenc-hmac-sha1-cbc-3des-talitos
[ 2.114259]
00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63
00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65
00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53
00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20
00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79
00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30
00000090: c0 99 74 3c
[ 2.166410] alg: aead: Test 1 failed on encryption for authenc-hmac-sha1-cbc-3des-talitos
[ 2.174794]
00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63
00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65
00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53
00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20
00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79
00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30
00000090: c0 99 74 3c
[ 2.226486] alg: No test for authenc(hmac(sha224),cbc(aes)) (authenc-hmac-sha224-cbc-aes-talitos)
[ 2.236459] alg: No test for authenc(hmac(sha224),cbc(aes)) (authenc-hmac-sha224-cbc-aes-talitos)
[ 2.247196] alg: aead: Test 1 failed on encryption for authenc-hmac-sha224-cbc-3des-talitos
[ 2.255555]
00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63
00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65
00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53
00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20
00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79
00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30
00000090: c0 99 74 3c c0 96 e5 b8
[ 2.309004] alg: aead: Test 1 failed on encryption for authenc-hmac-sha224-cbc-3des-talitos
[ 2.317562]
00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63
00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65
00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53
00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20
00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79
00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30
00000090: c0 99 74 3c c0 96 e5 b8
[ 2.370710] alg: aead: Test 1 failed on encryption for authenc-hmac-sha256-cbc-aes-talitos
[ 2.379177]
00000000: 53 69 6e 67 6c 65 20 62 6c 6f 63 6b 20 6d 73 67
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
[ 2.397863] alg: aead: Test 1 failed on encryption for authenc-hmac-sha256-cbc-aes-talitos
[ 2.406134]
00000000: 53 69 6e 67 6c 65 20 62 6c 6f 63 6b 20 6d 73 67
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
[ 2.424789] alg: aead: Test 1 failed on encryption for authenc-hmac-sha256-cbc-3des-talitos
[ 2.433491]
00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63
00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65
00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53
00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20
00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79
00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30
00000090: c0 99 74 3c c0 96 e5 b8 c0 96 e9 20 c0 00 3d dc
[ 2.488832] alg: aead: Test 1 failed on encryption for authenc-hmac-sha256-cbc-3des-talitos
[ 2.497387]
00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63
00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65
00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53
00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20
00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79
00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30
00000090: c0 99 74 3c c0 96 e5 b8 c0 96 e9 20 c0 00 3d dc
This patch fixes that.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Jurgens [Wed, 29 Nov 2017 18:10:39 +0000 (20:10 +0200)]
IB/core: Only enforce security for InfiniBand
commit
315d160c5a4e034a576a13aa21e7235d5c9ec609 upstream.
For now the only LSM security enforcement mechanism available is
specific to InfiniBand. Bypass enforcement for non-IB link types.
This fixes a regression where modify_qp fails for iWARP because
querying the PKEY returns -EINVAL.
Cc: Paul Moore <paul@paul-moore.com>
Cc: Don Dutile <ddutile@redhat.com>
Reported-by: Potnuri Bharat Teja <bharat@chelsio.com>
Fixes:
d291f1a65232("IB/core: Enforce PKey security on QPs")
Fixes:
47a2b338fe63("IB/core: Enforce security on management datagrams")
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Tested-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Parav Pandit [Thu, 2 Nov 2017 13:22:27 +0000 (15:22 +0200)]
IB/core: Avoid unnecessary return value check
commit
2e4c85c6edc80fa532b2c7e1eb3597ef4d4bbb8f upstream.
Since there is nothing done with non zero return value, such check is
avoided.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kim Phillips [Wed, 11 Oct 2017 21:33:24 +0000 (22:33 +0100)]
bus: arm-ccn: fix module unloading Error: Removing state 147 which has instances left.
commit
b69f63ebf553504739cc8534cbed31bd530c6f0b upstream.
Unregistering the driver before calling cpuhp_remove_multi_state() removes
any remaining hotplug cpu instances so __cpuhp_remove_state_cpuslocked()
doesn't emit this warning:
[ 268.748362] Error: Removing state 147 which has instances left.
[ 268.748373] ------------[ cut here ]------------
[ 268.748386] WARNING: CPU: 2 PID: 5476 at kernel/cpu.c:1734 __cpuhp_remove_state_cpuslocked+0x454/0x4f0
[ 268.748389] Modules linked in: arm_ccn(-) [last unloaded: arm_ccn]
[ 268.748403] CPU: 2 PID: 5476 Comm: rmmod Tainted: G W 4.14.0-rc4+ #3
[ 268.748406] Hardware name: AMD Seattle/Seattle, BIOS 10:18:39 Dec 8 2016
[ 268.748410] task:
ffff8001a18ca000 task.stack:
ffff80019c120000
[ 268.748416] PC is at __cpuhp_remove_state_cpuslocked+0x454/0x4f0
[ 268.748421] LR is at __cpuhp_remove_state_cpuslocked+0x448/0x4f0
[ 268.748425] pc : [<
ffff2000081729ec>] lr : [<
ffff2000081729e0>] pstate:
60000145
[ 268.748427] sp :
ffff80019c127d30
[ 268.748430] x29:
ffff80019c127d30 x28:
ffff8001a18ca000
[ 268.748437] x27:
ffff20000c2cb000 x26:
1fffe4000042d490
[ 268.748443] x25:
ffff20000216a480 x24:
0000000000000000
[ 268.748449] x23:
ffff20000b08e000 x22:
0000000000000001
[ 268.748455] x21:
0000000000000093 x20:
00000000000016f8
[ 268.748460] x19:
ffff20000c2cbb80 x18:
0000ffffb5fe7c58
[ 268.748466] x17:
00000000004402d0 x16:
1fffe40001864f01
[ 268.748472] x15:
ffff20000c4bf8b0 x14:
0000000000000000
[ 268.748477] x13:
0000000000007032 x12:
ffff20000829ae48
[ 268.748483] x11:
ffff20000c4bf000 x10:
0000000000000004
[ 268.748488] x9 :
0000000000006fbc x8 :
ffff20000c318a40
[ 268.748494] x7 :
0000000000000000 x6 :
ffff040001864f02
[ 268.748500] x5 :
0000000000000000 x4 :
0000000000000000
[ 268.748505] x3 :
0000000000000007 x2 :
dfff200000000000
[ 268.748510] x1 :
000000000000ad3d x0 :
00000000000001f0
[ 268.748516] Call trace:
[ 268.748521] Exception stack(0xffff80019c127bf0 to 0xffff80019c127d30)
[ 268.748526] 7be0:
00000000000001f0 000000000000ad3d
[ 268.748531] 7c00:
dfff200000000000 0000000000000007 0000000000000000 0000000000000000
[ 268.748535] 7c20:
ffff040001864f02 0000000000000000 ffff20000c318a40 0000000000006fbc
[ 268.748539] 7c40:
0000000000000004 ffff20000c4bf000 ffff20000829ae48 0000000000007032
[ 268.748544] 7c60:
0000000000000000 ffff20000c4bf8b0 1fffe40001864f01 00000000004402d0
[ 268.748548] 7c80:
0000ffffb5fe7c58 ffff20000c2cbb80 00000000000016f8 0000000000000093
[ 268.748553] 7ca0:
0000000000000001 ffff20000b08e000 0000000000000000 ffff20000216a480
[ 268.748557] 7cc0:
1fffe4000042d490 ffff20000c2cb000 ffff8001a18ca000 ffff80019c127d30
[ 268.748562] 7ce0:
ffff2000081729e0 ffff80019c127d30 ffff2000081729ec 0000000060000145
[ 268.748566] 7d00:
00000000000001f0 0000000000000000 0001000000000000 0000000000000000
[ 268.748569] 7d20:
ffff80019c127d30 ffff2000081729ec
[ 268.748575] [<
ffff2000081729ec>] __cpuhp_remove_state_cpuslocked+0x454/0x4f0
[ 268.748580] [<
ffff200008172adc>] __cpuhp_remove_state+0x54/0x80
[ 268.748597] [<
ffff20000215dd84>] arm_ccn_exit+0x2c/0x70 [arm_ccn]
[ 268.748604] [<
ffff20000834cfbc>] SyS_delete_module+0x5a4/0x708
[ 268.748607] Exception stack(0xffff80019c127ec0 to 0xffff80019c128000)
[ 268.748612] 7ec0:
0000000019bb7258 0000000000000800 ba64d0fb3d26a800 00000000000000da
[ 268.748616] 7ee0:
0000ffffb6144e28 0000ffffcd95b409 fefefefefefefeff 7f7f7f7f7f7f7f7f
[ 268.748621] 7f00:
000000000000006a 1999999999999999 0000ffffb6179000 0000000000bbcc6d
[ 268.748625] 7f20:
0000ffffb6176b98 0000ffffcd95c2d0 0000ffffb5fe7b58 0000ffffb6163000
[ 268.748630] 7f40:
0000ffffb60ad3e0 00000000004402d0 0000ffffb5fe7c58 0000000019bb71f0
[ 268.748634] 7f60:
0000ffffcd95c740 0000000000000000 0000000019bb71f0 0000000000416700
[ 268.748639] 7f80:
0000000000000000 00000000004402e8 0000000019bb6010 0000ffffcd95c748
[ 268.748643] 7fa0:
0000000000000000 0000ffffcd95c460 00000000004113a8 0000ffffcd95c460
[ 268.748648] 7fc0:
0000ffffb60ad3e8 0000000080000000 0000000019bb7258 000000000000006a
[ 268.748652] 7fe0:
0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 268.748657] [<
ffff200008084f9c>] __sys_trace_return+0x0/0x4
[ 268.748661] ---[ end trace
a996d358dcaa7f9c ]---
Fixes:
8df038725ad5 ("bus/arm-ccn: Use cpu-hp's multi instance support instead custom list")
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Zyngier [Tue, 3 Oct 2017 17:14:12 +0000 (18:14 +0100)]
bus: arm-ccn: Fix use of smp_processor_id() in preemptible context
commit
b18c2b9487d8e797fc0a757e57ac3645348c5fba upstream.
Booting a DEBUG_PREEMPT enabled kernel on a CCN-based system
results in the following splat:
[...]
arm-ccn
e8000000.ccn: No access to interrupts, using timer.
BUG: using smp_processor_id() in preemptible [
00000000] code: swapper/0/1
caller is debug_smp_processor_id+0x1c/0x28
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.13.0 #6111
Hardware name: AMD Seattle/Seattle, BIOS 17:08:23 Jun 26 2017
Call trace:
[<
ffff000008089e78>] dump_backtrace+0x0/0x278
[<
ffff00000808a22c>] show_stack+0x24/0x30
[<
ffff000008bc3bc4>] dump_stack+0x8c/0xb0
[<
ffff00000852b534>] check_preemption_disabled+0xfc/0x100
[<
ffff00000852b554>] debug_smp_processor_id+0x1c/0x28
[<
ffff000008551bd8>] arm_ccn_probe+0x358/0x4f0
[...]
as we use smp_processor_id() in the wrong context.
Turn this into a get_cpu()/put_cpu() that extends over the CPU hotplug
registration, making sure that we don't race against a CPU down operation.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe JAILLET [Sun, 27 Aug 2017 10:06:50 +0000 (11:06 +0100)]
bus: arm-ccn: Check memory allocation failure
commit
24771179c5c138f0ea3ef88b7972979f62f2d5db upstream.
Check memory allocation failures and return -ENOMEM in such cases
This avoids a potential NULL pointer dereference.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Zyngier [Tue, 3 Oct 2017 17:14:13 +0000 (18:14 +0100)]
bus: arm-cci: Fix use of smp_processor_id() in preemptible context
commit
4608af8aa53e7f3922ddee695d023b7bcd5cb35b upstream.
The ARM CCI driver seem to be using smp_processor_id() in a
preemptible context, which is likely to make a DEBUG_PREMPT
kernel scream at boot time.
Turn this into a get_cpu()/put_cpu() that extends over the CPU
hotplug registration, making sure that we don't race against
a CPU down operation.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabio Estevam [Wed, 15 Nov 2017 12:03:53 +0000 (10:03 -0200)]
Revert "ARM: dts: imx53: add srtc node"
commit
e501506d3ea00eefa64463ebd9e5c13ee70990bd upstream.
This reverts commit
5b725054147deaf966b3919e10a86c6bfe946a18.
The rtc block on i.MX53 is a completely different hardware than the
one found on i.MX25.
Reported-by: Noel Vellemans <Noel.Vellemans@visionbms.com>
Suggested-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Wed, 6 Dec 2017 10:51:12 +0000 (10:51 +0000)]
arm64: SW PAN: Update saved ttbr0 value on enter_lazy_tlb
commit
d96cc49bff5a7735576cc6f6f111f875d101cec8 upstream.
enter_lazy_tlb is called when a kernel thread rides on the back of
another mm, due to a context switch or an explicit call to unuse_mm
where a call to switch_mm is elided.
In these cases, it's important to keep the saved ttbr value up to date
with the active mm, otherwise we can end up with a stale value which
points to a potentially freed page table.
This patch implements enter_lazy_tlb for arm64, so that the saved ttbr0
is kept up-to-date with the active mm for kernel threads.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Fixes:
39bc88e5e38e9b21 ("arm64: Disable TTBR0_EL1 during normal kernel execution")
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Wed, 6 Dec 2017 10:42:10 +0000 (10:42 +0000)]
arm64: SW PAN: Point saved ttbr0 at the zero page when switching to init_mm
commit
0adbdfde8cfc9415aeed2a4955d2d17b3bd9bf13 upstream.
update_saved_ttbr0 mandates that mm->pgd is not swapper, since swapper
contains kernel mappings and should never be installed into ttbr0. However,
this means that callers must avoid passing the init_mm to update_saved_ttbr0
which in turn can cause the saved ttbr0 value to be out-of-date in the context
of the idle thread. For example, EFI runtime services may leave the saved ttbr0
pointing at the EFI page table, and kernel threads may end up with stale
references to freed page tables.
This patch changes update_saved_ttbr0 so that the init_mm points the saved
ttbr0 value to the empty zero page, which always exists and never contains
valid translations. EFI and switch can then call into update_saved_ttbr0
unconditionally.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Fixes:
39bc88e5e38e9b21 ("arm64: Disable TTBR0_EL1 during normal kernel execution")
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Martin [Tue, 5 Dec 2017 14:56:42 +0000 (14:56 +0000)]
arm64: fpsimd: Prevent registers leaking from dead tasks
commit
071b6d4a5d343046f253a5a8835d477d93992002 upstream.
Currently, loading of a task's fpsimd state into the CPU registers
is skipped if that task's state is already present in the registers
of that CPU.
However, the code relies on the struct fpsimd_state * (and by
extension struct task_struct *) to unambiguously identify a task.
There is a particular case in which this doesn't work reliably:
when a task exits, its task_struct may be recycled to describe a
new task.
Consider the following scenario:
1) Task P loads its fpsimd state onto cpu C.
per_cpu(fpsimd_last_state, C) := P;
P->thread.fpsimd_state.cpu := C;
2) Task X is scheduled onto C and loads its fpsimd state on C.
per_cpu(fpsimd_last_state, C) := X;
X->thread.fpsimd_state.cpu := C;
3) X exits, causing X's task_struct to be freed.
4) P forks a new child T, which obtains X's recycled task_struct.
T == X.
T->thread.fpsimd_state.cpu == C (inherited from P).
5) T is scheduled on C.
T's fpsimd state is not loaded, because
per_cpu(fpsimd_last_state, C) == T (== X) &&
T->thread.fpsimd_state.cpu == C.
(This is the check performed by fpsimd_thread_switch().)
So, T gets X's registers because the last registers loaded onto C
were those of X, in (2).
This patch fixes the problem by ensuring that the sched-in check
fails in (5): fpsimd_flush_task_state(T) is called when T is
forked, so that T->thread.fpsimd_state.cpu == C cannot be true.
This relies on the fact that T is not schedulable until after
copy_thread() completes.
Once T's fpsimd state has been loaded on some CPU C there may still
be other cpus D for which per_cpu(fpsimd_last_state, D) ==
&X->thread.fpsimd_state. But D is necessarily != C in this case,
and the check in (5) must fail.
An alternative fix would be to do refcounting on task_struct. This
would result in each CPU holding a reference to the last task whose
fpsimd state was loaded there. It's not clear whether this is
preferable, and it involves higher overhead than the fix proposed
in this patch. It would also move all the task_struct freeing
work into the context switch critical section, or otherwise some
deferred cleanup mechanism would need to be introduced, neither of
which seems obviously justified.
Fixes:
005f78cd8849 ("arm64: defer reloading a task's FPSIMD state to userland resume")
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[will: word-smithed the comment so it makes more sense]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Zyngier [Thu, 16 Nov 2017 17:58:18 +0000 (17:58 +0000)]
KVM: arm/arm64: vgic-its: Check result of allocation before use
commit
686f294f2f1ae40705283dd413ca1e4c14f20f93 upstream.
We miss a test against NULL after allocation.
Fixes:
6d03a68f8054 ("KVM: arm64: vgic-its: Turn device_id validation into generic ID validation")
Reported-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Zyngier [Thu, 16 Nov 2017 17:58:16 +0000 (17:58 +0000)]
KVM: arm/arm64: vgic: Preserve the revious read from the pending table
commit
ddb4b0102cb9cdd2398d98b3e1e024e08a2f4239 upstream.
The current pending table parsing code assumes that we keep the
previous read of the pending bits, but keep that variable in
the current block, making sure it is discarded on each loop.
We end-up using whatever is on the stack. Who knows, it might
just be the right thing...
Fixes:
280771252c1ba ("KVM: arm64: vgic-v3: KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES")
Reported-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Zyngier [Thu, 16 Nov 2017 17:58:15 +0000 (17:58 +0000)]
KVM: arm/arm64: vgic-irqfd: Fix MSI entry allocation
commit
150009e2c70cc3c6e97f00e7595055765d32fb85 upstream.
Using the size of the structure we're allocating is a good idea
and avoids any surprise... In this case, we're happilly confusing
kvm_kernel_irq_routing_entry and kvm_irq_routing_entry...
Fixes:
95b110ab9a09 ("KVM: arm/arm64: Enable irqchip routing")
Reported-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christoffer Dall [Sun, 3 Dec 2017 22:54:41 +0000 (23:54 +0100)]
KVM: arm/arm64: Fix broken GICH_ELRSR big endian conversion
commit
fc396e066318c0a02208c1d3f0b62950a7714999 upstream.
We are incorrectly rearranging 32-bit words inside a 64-bit typed value
for big endian systems, which would result in never marking a virtual
interrupt as inactive on big endian systems (assuming 32 or fewer LRs on
the hardware). Fix this by not doing any word order manipulation for
the typed values.
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrew Honig [Fri, 1 Dec 2017 18:21:09 +0000 (10:21 -0800)]
KVM: VMX: remove I/O port 0x80 bypass on Intel hosts
commit
d59d51f088014f25c2562de59b9abff4f42a7468 upstream.
This fixes CVE-2017-
1000407.
KVM allows guests to directly access I/O port 0x80 on Intel hosts. If
the guest floods this port with writes it generates exceptions and
instability in the host kernel, leading to a crash. With this change
guest writes to port 0x80 on Intel will behave the same as they
currently behave on AMD systems.
Prevent the flooding by removing the code that sets port 0x80 as a
passthrough port. This is essentially the same as upstream patch
99f85a28a78e96d28907fe036e1671a218fee597, except that patch was
for AMD chipsets and this patch is for Intel.
Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Fixes:
fdef3ad1b386 ("KVM: VMX: Enable io bitmaps to avoid IO port 0x80 VMEXITs")
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Zyngier [Thu, 16 Nov 2017 17:58:21 +0000 (17:58 +0000)]
arm: KVM: Fix VTTBR_BADDR_MASK BUG_ON off-by-one
commit
5553b142be11e794ebc0805950b2e8313f93d718 upstream.
VTTBR_BADDR_MASK is used to sanity check the size and alignment of the
VTTBR address. It seems to currently be off by one, thereby only
allowing up to 39-bit addresses (instead of 40-bit) and also
insufficiently checking the alignment. This patch fixes it.
This patch is the 32bit pendent of Kristina's arm64 fix, and
she deserves the actual kudos for pinpointing that one.
Fixes:
f7ed45be3ba52 ("KVM: ARM: World-switch implementation")
Reported-by: Kristina Martsenko <kristina.martsenko@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kristina Martsenko [Thu, 16 Nov 2017 17:58:20 +0000 (17:58 +0000)]
arm64: KVM: fix VTTBR_BADDR_MASK BUG_ON off-by-one
commit
26aa7b3b1c0fb3f1a6176a0c1847204ef4355693 upstream.
VTTBR_BADDR_MASK is used to sanity check the size and alignment of the
VTTBR address. It seems to currently be off by one, thereby only
allowing up to 47-bit addresses (instead of 48-bit) and also
insufficiently checking the alignment. This patch fixes it.
As an example, with 4k pages, before this patch we have:
PHYS_MASK_SHIFT = 48
VTTBR_X = 37 - 24 = 13
VTTBR_BADDR_SHIFT = 13 - 1 = 12
VTTBR_BADDR_MASK = ((1 << 35) - 1) << 12 = 0x00007ffffffff000
Which is wrong, because the mask doesn't allow bit 47 of the VTTBR
address to be set, and only requires the address to be 12-bit (4k)
aligned, while it actually needs to be 13-bit (8k) aligned because we
concatenate two 4k tables.
With this patch, the mask becomes 0x0000ffffffffe000, which is what we
want.
Fixes:
0369f6a34b9f ("arm64: KVM: EL2 register definitions")
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Young [Sun, 19 Nov 2017 21:57:27 +0000 (16:57 -0500)]
media: rc: partial revert of "media: rc: per-protocol repeat period"
commit
67f0f15ad5c47490e19f2526f8f9cea97c5ce1a6 upstream.
Since commit
d57ea877af38 ("media: rc: per-protocol repeat period"), most
IR protocols have a lower keyup timeout. This causes problems on the
ite-cir, which has default IR timeout of 200ms.
Since the IR decoders read the trailing space, with a IR timeout of 200ms,
the last keydown will have at least a delay of 200ms. This is more than
the protocol timeout of e.g. rc-6 (which is 164ms). As a result the last
IR will be interpreted as a new keydown event, and we get two keypresses.
Revert the protocol timeout to 250ms, except for cec which needs a timeout
of 550ms.
Fixes:
d57ea877af38 ("media: rc: per-protocol repeat period")
Reported-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Sean Young <sean@mess.org>
Tested-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Young [Wed, 8 Nov 2017 21:19:45 +0000 (16:19 -0500)]
media: rc: sir_ir: detect presence of port
commit
30b4e122d71cbec2944a5f8b558b88936ee42f10 upstream.
Without this test, sir_ir clumsy claims resources for a device which
does not exist.
The 0-day kernel test robot reports the following errors (in a loop):
sir_ir sir_ir.0: Trapped in interrupt
genirq: Flags mismatch irq 4.
00000000 (ttyS0) vs.
00000000 (sir_ir)
When sir_ir is loaded with the default io and irq, the following happens:
- sir_ir claims irq 4
- user space opens /dev/ttyS0
- in serial8250_do_startup(), some setup is done for ttyS0, which causes
irq 4 to fire (in THRE test)
- sir_ir does not realise it was not for it, and spins until the "trapped
in interrupt"
- now serial driver calls setup_irq() and fails and we get the
"Flags mismatch" error.
There is no port present at 0x3e8 so simply check for the presence of a
port, as suggested by Linus.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laurent Caumont [Sat, 11 Nov 2017 17:44:46 +0000 (12:44 -0500)]
media: dvb: i2c transfers over usb cannot be done from stack
commit
6d33377f2abbf9f0e561b116dd468d1c3ff36a6a upstream.
Signed-off-by: Laurent Caumont <lcaumont2@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ville Syrjälä [Wed, 29 Nov 2017 15:37:30 +0000 (17:37 +0200)]
drm/i915: Fix vblank timestamp/frame counter jumps on gen2
commit
a87e55f89f0b0dc541d89248a8445635936a3858 upstream.
Previously I was under the impression that the scanline counter
reads 0 when the pipe is off. Turns out that's not correct, and
instead the scanline counter simply stops when the pipe stops, and
it retains it's last value until the pipe starts up again, at which
point the scanline counter jumps to vblank start.
These jumps can cause the timestamp to jump backwards by one frame.
Since we use the timestamps to guesstimage also the frame counter
value on gen2, that would cause the frame counter to also jump
backwards, which leads to a massice difference from the previous value.
The end result is that flips/vblank events don't appear to complete as
they're stuck waiting for the frame counter to catch up to that massive
difference.
Fix the problem properly by actually making sure the scanline counter
has started to move before we assume that it's safe to enable vblank
processing.
v2: Less pointless duplication in the code (Chris)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes:
b7792d8b54cc ("drm/i915: Wait for pipe to start before sampling vblank timestamps on gen2")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171129153732.3612-1-ville.syrjala@linux.intel.com
(cherry picked from commit
8fedd64dabc86d0f31a0d1e152be3aa23c323553)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marek Szyprowski [Wed, 22 Nov 2017 13:14:47 +0000 (14:14 +0100)]
drm/exynos: gem: Drop NONCONTIG flag for buffers allocated without IOMMU
commit
120a264f9c2782682027d931d83dcbd22e01da80 upstream.
When no IOMMU is available, all GEM buffers allocated by Exynos DRM driver
are contiguous, because of the underlying dma_alloc_attrs() function
provides only such buffers. In such case it makes no sense to keep
BO_NONCONTIG flag for the allocated GEM buffers. This allows to avoid
failures for buffer contiguity checks in the subsequent operations on GEM
objects.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>