OSDN Git Service
Ben Skeggs [Fri, 4 Nov 2016 07:20:36 +0000 (17:20 +1000)]
drm/nouveau/kms/nv50: remove code to create ctxdma for every framebuffer
This is now handled by prepare_fb(). Legacy flips were the last user.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:36 +0000 (17:20 +1000)]
drm/nouveau/kms/nv50: remove code to support non-atomic page flips
Made completely unreachable (and broken) by atomic commits.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:36 +0000 (17:20 +1000)]
drm/nouveau/kms/nv50: remove code to support non-atomic connector properties
Made completely unreachable by atomic commits.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:36 +0000 (17:20 +1000)]
drm/nouveau/kms/nv50: remove code to support non-atomic dpms
Made completely unreachable (and broken) by atomic commits.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:36 +0000 (17:20 +1000)]
drm/nouveau/kms/nv50: remove code to support non-atomic modesets
Make completely unreachable (and broken) by atomic commits.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:36 +0000 (17:20 +1000)]
drm/nouveau/kms/nv50: transition to atomic interfaces internally
This commit implements the atomic commit interfaces, and implements the
legacy modeset and page flipping interfaces on top of them.
There's two major changes in behavior from before:
- We're now making use of interlocks between core and satellite EVO
channels, which greatly improves our ability to keep their states
synchronised.
- DPMS is now implemented as a full modeset to either tear down the
entire pipe (or bring it back up). This choice was made mostly
to ease the initial implementation, but I'm also not sure what we
gain by bring backing the old behaviour. We shall see.
This does NOT currently expose the atomic ioctl by default, due to
limited testing having been performed.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:36 +0000 (17:20 +1000)]
drm/nouveau/kms/nv50: turn mode_set_base_atomic() into a stub
This cannot currently be supported with atomic modesettting.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:36 +0000 (17:20 +1000)]
drm/nouveau/kms/nv50: convert encoder mode_fixup into an atomic_check()
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:36 +0000 (17:20 +1000)]
drm/nouveau/kms/nv50: clean-up encoder functions
Just a shuffle of blocks into an order consistent with the rest of the
code, renaming hdmi/audio funtions for atomic, and removal of unused
code.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:36 +0000 (17:20 +1000)]
drm/nouveau/kms/nv50: ensure encoder normal power state is enabled at startup
To handle low-power DPMS states, we currently change an OR's (Output
Resource) normal (active) power state to be off, leaving the rest of
the display configured as usual.
Under atomic modesetting, we will instead be doing a full modeset to
tear down the pipe fully when entering a low-power state.
As we'll no longer be touching the OR's PWR registers during runtime
operation, we need to ensure the normal power state is set correctly
during initialisation.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:36 +0000 (17:20 +1000)]
drm/nouveau/kms/nv50: prepare ctxdma interface to be usable with atomic
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:36 +0000 (17:20 +1000)]
drm/nouveau/kms/nv50: separate out cursor channel commit
This commit separates the calculation of EVO state from the commit, in
order to make the same code useful for atomic modesetting.
The legacy interfaces have been wrapped on top of them.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:36 +0000 (17:20 +1000)]
drm/nouveau/kms/nv50: separate out base channel commit
This commit separates the calculation of EVO state from the commit, in
order to make the same code useful for atomic modesetting.
The legacy interfaces have been wrapped on top of them.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:36 +0000 (17:20 +1000)]
drm/nouveau/kms/nv50: separate out vblank dmi commit
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:36 +0000 (17:20 +1000)]
drm/nouveau/kms/nv50: separate out procamp commit
This commit separates the calculation of EVO state from the commit, in
order to make the same code useful for atomic modesetting.
The legacy interfaces have been wrapped on top of them.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:36 +0000 (17:20 +1000)]
drm/nouveau/kms/nv50: separate out dither commit
This commit separates the calculation of EVO state from the commit, in
order to make the same code useful for atomic modesetting.
The legacy interfaces have been wrapped on top of them.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:36 +0000 (17:20 +1000)]
drm/nouveau/kms/nv50: separate out viewport commit
This commit separates the calculation of EVO state from the commit, in
order to make the same code useful for atomic modesetting.
The legacy interfaces have been wrapped on top of them.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:36 +0000 (17:20 +1000)]
drm/nouveau/kms/nv50: separate out base/ovly channel usage bounds commit
This commit separates the calculation of EVO state from the commit, in
order to make the same code useful for atomic modesetting.
The legacy interfaces have been wrapped on top of them.
We're no longer touching the overlay channel usage bounds as of this
commit. The code to do so is in place for when overlay planes are
added.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:36 +0000 (17:20 +1000)]
drm/nouveau/kms/nv50: separate out cursor surface commit
This commit separates the calculation of EVO state from the commit, in
order to make the same code useful for atomic modesetting.
The legacy interfaces have been wrapped on top of them.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:36 +0000 (17:20 +1000)]
drm/nouveau/kms/nv50: separate out lut commit
This commit separates the calculation of EVO state from the commit, in
order to make the same code useful for atomic modesetting.
The legacy interfaces have been wrapped on top of them.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:36 +0000 (17:20 +1000)]
drm/nouveau/kms/nv50: separate out core surface commit
This commit separates the calculation of EVO state from the commit, in
order to make the same code useful for atomic modesetting.
The legacy interfaces have been wrapped on top of them.
As of this commit, we're no longer bothering to point the core surface
at a valid framebuffer. Prior to this, we'd initially point the core
channel to the framebuffer passed in a mode_set()/mode_set_base(), and
then use the base channel for any page-flip updates, leaving the core
channel pointing at stale information.
The important thing here is to configure the core surface parameters in
such a way that EVO's error checking is satisfied.
TL;DR: The situation isn't too much different to before.
There may be brief periods of times during modesets where the (garbage)
core surface will be showing. This issue will be resolved once support
for atomic commits has been implemented and we're able to interlock the
updates that involve multiple channels.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:36 +0000 (17:20 +1000)]
drm/nouveau/kms/nv50: separate out mode commit
This commit separates the calculation of EVO state from the commit, in
order to make the same code useful for atomic modesetting.
The legacy interfaces have been wrapped on top of them.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:36 +0000 (17:20 +1000)]
drm/nouveau/kms/nv50: give more useful names to encoders
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:36 +0000 (17:20 +1000)]
drm/nouveau/kms/nv50: control evo trace output with DRM_UT_KMS
Will be useful in debugging the transition to atomic.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:36 +0000 (17:20 +1000)]
drm/nouveau/kms/nv50: switch mst sink back into sst mode
Sometimes we load with a sink already in MST mode. If, however, we can't
or don't want to use MST, we need to be able to switch it back to SST.
This commit instantiates a stub topology manager for any output path that
we believe (the detection of this could use some improvement) has support
for MST, and adds the connector detect() logic for detecting sink support
and switching between modes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:36 +0000 (17:20 +1000)]
drm/nouveau/kms: never call drm_helper_disable_unused_functions() with atomic
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:36 +0000 (17:20 +1000)]
drm/nouveau/kms: prepare to support suspend/resume of display state with atomic
This is different from the equivilant functions in the atomic helpers in
that we fully disable the pipe instead of just setting it to inactive.
We do this (primarily) to ensure the framebuffer cleanup paths are hit,
allowing buffers to be un-pinned from memory so they can be evicted to
system memory and not lose their contents while suspended.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:35 +0000 (17:20 +1000)]
drm/nouveau/kms: prepare to support vbl timestamp calculation with atomic
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:35 +0000 (17:20 +1000)]
drm/nouveau/kms: prepare to support legacy connector set_property with atomic
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:35 +0000 (17:20 +1000)]
drm/nouveau/kms: prepare to support legacy connector dpms with atomic
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:35 +0000 (17:20 +1000)]
drm/nouveau/kms: separate connector property attach from nouveau_connector
These will also be used by MST connectors.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:35 +0000 (17:20 +1000)]
drm/nouveau/kms: subclass atomic connector state
This commit implements the atomic property hooks for a connector, and
wraps the legacy interface handling on top of those.
For the moment, a full modeset will be done after any property change
in order to ease subsequent changes. The optimised behaviour will be
restored for Tesla and later (earlier boards always do full modesets)
once atomic commits are implemented.
Some functions are put under the "nouveau_conn" namespace now, rather
than "nouveau_connector", to distinguish functions that will work for
(upcoming) MST connectors too.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:35 +0000 (17:20 +1000)]
drm/nouveau/kms: execute drm_mode_config_reset() after constructing display
This will ensure we have some kind of initial atomic state for all objects
after initialisation.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:35 +0000 (17:20 +1000)]
drm/nouveau/kms: move drm_crtc_force_disable_all() earlier
nouveau_display_fini() is responsible for quiescing the hardware, so
this is where such actions belong.
More than that, nouveau_display_fini() switches off the receiving of
sink irqs, which MST will require while shutting down an active head.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:35 +0000 (17:20 +1000)]
drm/nouveau/kms: drop dpms off/on in response to hotplug
This primarily existed to ensure the DP link got retrained, and is
now unnecessary as that's handled by NVKM already.
For anything beyond that, we send an event to userspace and let it
decide on an appropriate action to take.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:35 +0000 (17:20 +1000)]
drm/nouveau/fbcon: refcount the drm_framebuffer
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:35 +0000 (17:20 +1000)]
drm/nouveau/fbcon: make use of drm_fb_helper.fb
Transitional step towards properly refcounting the fbcon fb.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:35 +0000 (17:20 +1000)]
drm/nouveau/fbcon: make use of drm_fb_helper.dev
No need to store the pointer ourselves when it's already present in
the base struct.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:35 +0000 (17:20 +1000)]
drm/nouveau/disp/g94-: stop listening for dp (sst) retrain irq when disabling link
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:35 +0000 (17:20 +1000)]
drm/nouveau/disp/sor/gf119-: add method to program mst payload information
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:35 +0000 (17:20 +1000)]
drm/nouveau/disp/sor/gf119-: add method to control mst enable
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:35 +0000 (17:20 +1000)]
drm/nouveau/disp/dp: remove workqueue for link training
There haven't been any callers from an atomic context for a while now,
so let's remove the extra complexity.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 07:20:35 +0000 (17:20 +1000)]
drm/nouveau/nvif: helper to match against supported class list
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 4 Nov 2016 01:44:21 +0000 (11:44 +1000)]
drm/nouveau: silence sparse warnings about symbols not being marked static
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Christophe JAILLET [Mon, 31 Oct 2016 06:35:50 +0000 (07:35 +0100)]
drm/nouveau/tegra: Fix error handling
'iommu_domain_alloc()' returns NULL in case of error, not an error pointer.
So test it accordingly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Thu, 27 Oct 2016 07:55:54 +0000 (16:55 +0900)]
drm/nouveau/fb: add gm20b device
gm20b's FB has the same capabilities as gm200, minus the ability to
allocate RAM. Create a device that reflects this instead of re-using the
gk20a device which may be incorrect.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-By: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Thu, 27 Oct 2016 07:55:53 +0000 (16:55 +0900)]
drm/nouveau/fb/gk20a: use regular gf100's functions
gk20a's FB is not special compared to other Kepler chips, besides the
fact it does not have VRAM. Use the regular gf100 hooks instead of the
incomplete versions we rewrote.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-By: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Thu, 27 Oct 2016 07:55:52 +0000 (16:55 +0900)]
drm/nouveau/fb/gk20a: fix constructor call
The gf100 constructor should be called, otherwise we will allocate a
smaller object than expected. This was without effect so far because
gk20a did not allocate a page, but with gf100's page allocation moved
to the oneinit() hook this problem has become apparent.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Thu, 27 Oct 2016 03:48:51 +0000 (12:48 +0900)]
drm/nouveau/pmu: remove reset() hook
The reset hook of pmu_func is never called, and gt215 was the only chip
to implement. Remove this dead code.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Lucas Stach [Wed, 26 Oct 2016 11:11:06 +0000 (13:11 +0200)]
drm/nouveau: fix notify data leak
There is no reason to not free the notify data if the NTFY_DEL ioctl
failed. As nvif_notify_fini() is also called from the cleanup path of
nvif_notify_init(), the notifier may not have been successfully created
at that point. But it should also be the right thing to just free the
data in the regular fini calls, as there is nothing much we can do if
the ioctl fails, so better not leak memory.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Lucas Stach [Tue, 25 Oct 2016 19:55:12 +0000 (21:55 +0200)]
drm/nouveau: fix nv84 fence context leak
uevent based fences hold a reference to the fence context,
just like the legacy ones. So they need to drop this reference
in the same way.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Arnd Bergmann [Mon, 24 Oct 2016 15:30:38 +0000 (17:30 +0200)]
drm/nouveau: hide gcc-4.9 -Wmaybe-uninitialized
gcc-4.9 notices that the validate_init() function returns unintialized
data when called with a zero 'nr_buffers' argument, when called with the
-Wmaybe-uninitialized flag:
drivers/gpu/drm/nouveau/nouveau_gem.c: In function ‘validate_init.isra.6’:
drivers/gpu/drm/nouveau/nouveau_gem.c:457:5: error: ‘ret’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
However, the only caller of this function always passes a nonzero
argument, and gcc-6 is clever enough to take this into account and
not warn about it any more.
Adding an explicit initialization to -EINVAL here is correct even if
the caller changed, and it avoids the warning on gcc-4.9 as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-By: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Baoyou Xie [Mon, 24 Oct 2016 03:09:03 +0000 (11:09 +0800)]
drm/nouveau: mark symbols static where possible
We get a few warnings when building kernel with W=1:
drivers/gpu/drm/nouveau/nvkm/subdev/bios/fan.c:29:1: warning: no previous prototype for 'nvbios_fan_table' [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/subdev/bios/fan.c:56:1: warning: no previous prototype for 'nvbios_fan_entry' [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/subdev/clk/gt215.c:184:1: warning: no previous prototype for 'gt215_clk_info' [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramgt215.c:99:1: warning: no previous prototype for 'gt215_link_train_calc' [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramgt215.c:153:1: warning: no previous prototype for 'gt215_link_train' [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramgt215.c:271:1: warning: no previous prototype for 'gt215_link_train_init' [-Wmissing-prototypes]
....
In fact, both functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
So this patch marks these functions with 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Baoyou Xie [Mon, 24 Oct 2016 03:09:02 +0000 (11:09 +0800)]
drm/nouveau: add missing header dependencies
We get a few warnings when building kernel with W=1:
drivers/gpu/drm/nouveau/nvkm/core/firmware.c:34:1: warning: no previous prototype for 'nvkm_firmware_get' [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/core/firmware.c:58:1: warning: no previous prototype for 'nvkm_firmware_put' [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/subdev/fb/sddr3.c:69:1: warning: no previous prototype for 'nvkm_sddr3_calc' [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/subdev/fb/sddr2.c:60:1: warning: no previous prototype for 'nvkm_sddr2_calc' [-Wmissing-prototypes]
....
In fact, these functions are declared in
drivers/gpu/drm/nouveau/include/nvkm/core/firmware.h
drivers/gpu/drm/nouveau/nvkm/subdev/fb/ram.h
drivers/gpu/drm/nouveau/nvkm/subdev/volt/priv.h
drivers/gpu/drm/nouveau/nvkm/engine/gr/nv50.h
drivers/gpu/drm/nouveau/dispnv04/disp.h.
So this patch adds missing header dependencies.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 3 Nov 2016 06:37:33 +0000 (16:37 +1000)]
drm/nouveau/i2c/gk110b,gm10x: use the correct implementation
DPAUX registers moved on Kepler, these chipsets were still using the
Fermi implementation for some reason.
This fixes detection of hotplug/sink IRQs on DP connectors.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Ben Skeggs [Thu, 3 Nov 2016 06:37:33 +0000 (16:37 +1000)]
drm/nouveau/i2c/aux/g94-: retry transactions after hw reports an error
This fixes (works around?) link training failures seen on (at least)
the Lenovo P50's internal panel.
It's also an important fix on the same system for MST support on the
dock. Sometimes, right after receiving an IRQ from the sink, there's
an error bit (SINKSTAT_ERR) set in the DPAUX registers before we've
even attempted a transaction.
v2. Fixed regression on passive DP->DVI adapters.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 19 Oct 2016 02:15:52 +0000 (12:15 +1000)]
drm/nouveau/kms: lvds panel strap moved again on maxwell
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Ben Skeggs [Wed, 19 Oct 2016 02:14:24 +0000 (12:14 +1000)]
drm/nouveau/mxm: add some extra debug output
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 14 Oct 2016 03:16:36 +0000 (13:16 +1000)]
drm/nouveau/bios: require checksum to match for fast acpi shadow method
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Dave Airlie [Sun, 6 Nov 2016 23:37:09 +0000 (09:37 +1000)]
Backmerge tag 'v4.9-rc4' into drm-next
Linux 4.9-rc4
This is needed for nouveau development.
Dave Airlie [Sun, 6 Nov 2016 23:19:23 +0000 (09:19 +1000)]
Merge tag 'omapdrm-4.10' of git://git./linux/kernel/git/tomba/linux into drm-next
omapdrm changes for v4.10
The main change here is the big refactoring to remove omapdrm's own
'omap_video_timings', and use the standard display timings.
Besides that, a few minor fixes and cleanups.
Linus Torvalds [Sat, 5 Nov 2016 23:23:36 +0000 (16:23 -0700)]
Linux 4.9-rc4
Linus Torvalds [Sat, 5 Nov 2016 22:30:12 +0000 (15:30 -0700)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"A bugfix for the I2C core fixing a (rare) race condition"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: core: fix NULL pointer dereference under race condition
Linus Torvalds [Sat, 5 Nov 2016 18:46:02 +0000 (11:46 -0700)]
Merge branches 'sched-urgent-for-linus' and 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull stack vmap fixups from Thomas Gleixner:
"Two small patches related to sched_show_task():
- make sure to hold a reference on the task stack while accessing it
- remove the thread_saved_pc printout
.. and add a sanity check into release_task_stack() to catch problems
with task stack references"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Remove pointless printout in sched_show_task()
sched/core: Fix oops in sched_show_task()
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fork: Add task stack refcounting sanity check and prevent premature task stack freeing
Linus Torvalds [Sat, 5 Nov 2016 18:34:07 +0000 (11:34 -0700)]
Merge tag 'md/4.9-rc3' of git://git./linux/kernel/git/shli/md
Pull MD fixes from Shaohua Li:
"There are several bug fixes queued:
- fix raid5-cache recovery bugs
- fix discard IO error handling for raid1/10
- fix array sync writes bogus position to superblock
- fix IO error handling for raid array with external metadata"
* tag 'md/4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
md: be careful not lot leak internal curr_resync value into metadata. -- (all)
raid1: handle read error also in readonly mode
raid5-cache: correct condition for empty metadata write
md: report 'write_pending' state when array in sync
md/raid5: write an empty meta-block when creating log super-block
md/raid5: initialize next_checkpoint field before use
RAID10: ignore discard error
RAID1: ignore discard error
Linus Torvalds [Sat, 5 Nov 2016 18:28:21 +0000 (11:28 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two more important data integrity fixes related to RAID device drivers
which wrongly throw away the SYNCHRONIZE CACHE command in the non-RAID
path and a memory leak in the scsi_debug driver"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: arcmsr: Send SYNCHRONIZE_CACHE command to firmware
scsi: scsi_debug: Fix memory leak if LBP enabled and module is unloaded
scsi: megaraid_sas: Fix data integrity failure for JBOD (passthrough) devices
Linus Torvalds [Sat, 5 Nov 2016 18:26:11 +0000 (11:26 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input subsystem updates from Dmitry Torokhov.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: psmouse - cleanup Focaltech code
Input: i8042 - add XMG C504 to keyboard reset table
Linus Torvalds [Sat, 5 Nov 2016 18:17:34 +0000 (11:17 -0700)]
Merge tag 'firewire-fixes' of git://git./linux/kernel/git/ieee1394/linux1394
Pull FireWire (IEEE 1394) fixes from Stefan Richter:
- add missing input validation to the firewire-net driver. Invalid
IP-over-1394 encapsulation headers could trigger buffer overflows
(CVE 2016-8633).
- IP-over-1394 link fragmentation headers were read and written
incorrectly, breaking fragmented RX/TX with other OS's stacks.
* tag 'firewire-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: net: fix fragmented datagram_size off-by-one
firewire: net: guard against rx buffer overflows
Linus Torvalds [Sat, 5 Nov 2016 18:15:09 +0000 (11:15 -0700)]
Merge tag 'media/v4.9-3' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"A series of fixup patches meant to fix the usage of DMA on stack, plus
one warning fixup"
* tag 'media/v4.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (32 commits)
[media] radio-bcm2048: don't ignore errors
[media] pctv452e: fix semicolon.cocci warnings
[media] flexcop-usb: don't use stack for DMA
[media] stk-webcam: don't use stack for DMA
[media] s2255drv: don't use stack for DMA
[media] cpia2_usb: don't use stack for DMA
[media] digitv: handle error code on RC query
[media] dw2102: return error if su3000_power_ctrl() fails
[media] nova-t-usb2: handle error code on RC query
[media] technisat-usb2: use DMA buffers for I2C transfers
[media] pctv452e: don't call BUG_ON() on non-fatal error
[media] pctv452e: don't do DMA on stack
[media] nova-t-usb2: don't do DMA on stack
[media] gp8psk: don't go past the buffer size
[media] gp8psk: don't do DMA on stack
[media] dtv5100: don't do DMA on stack
[media] dtt200u: handle USB control message errors
[media] dtt200u: don't do DMA on stack
[media] dtt200u-fe: handle errors on USB control messages
[media] dtt200u-fe: don't do DMA on stack
...
Linus Torvalds [Sat, 5 Nov 2016 18:11:31 +0000 (11:11 -0700)]
Merge tag 'pci-v4.9-fixes-2' of git://git./linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- fix for a Qualcomm driver issue that causes a use-before-set crash
- fix for DesignWare iATU unroll support that causes external aborts
when enabling the host bridge
* tag 'pci-v4.9-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: designware: Check for iATU unroll support after initializing host
PCI: qcom: Fix pp->dev usage before assignment
Linus Torvalds [Sat, 5 Nov 2016 17:52:29 +0000 (10:52 -0700)]
Merge tag 'for-linus-
20161104' of git://git.infradead.org/linux-mtd
Pull MTD fixes from Brian Norris:
- MAINTAINERS updates to reflect some new maintainers/submaintainers.
We have some great volunteers who've been developing and reviewing
already. We're going to try a group maintainership model, so
eventually you'll probably see pull requests from people besides me.
- NAND fixes from Boris:
"Three simple fixes:
- fix a non-critical bug in the gpmi driver
- fix a bug in the 'automatic NAND timings selection' feature
introduced in 4.9-rc1
- fix a false positive uninitialized-var warning"
* tag 'for-linus-
20161104' of git://git.infradead.org/linux-mtd:
mtd: mtk: avoid warning in mtk_ecc_encode
mtd: nand: Fix data interface configuration logic
mtd: nand: gpmi: disable the clocks on errors
MAINTAINERS: add more people to the MTD maintainer team
MAINTAINERS: add a maintainer for the SPI NOR subsystem
Linus Torvalds [Sat, 5 Nov 2016 17:49:28 +0000 (10:49 -0700)]
Merge tag 'mmc-v4.9-rc2' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC host:
- sdhci-msm: Fix error path in probe
- dw_mmc-pltfm: Avoid NULL pointer dereference"
* tag 'mmc-v4.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-msm: Fix error return code in sdhci_msm_probe()
mmc: dw_mmc-pltfm: fix the potential NULL pointer dereference
Linus Torvalds [Sat, 5 Nov 2016 17:42:20 +0000 (10:42 -0700)]
Merge tag 'gpio-v4.9-3' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Some GPIO fixes for the v4.9 series:
- Fix a nasty file descriptor leak when getting line handles.
- A fix for a cleanup that seemed innocent but created a problem for
drivers instantiating several gpiochips for one single OF node.
- Fix a unpredictable problem using irq_domain_simple() in the mvebu
driver by converting it to a lineas irqdomain"
* tag 'gpio-v4.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio/mvebu: Use irq_domain_add_linear
gpio: of: fix GPIO drivers with multiple gpio_chip for a single node
gpio: GPIO_GET_LINE{HANDLE,EVENT}_IOCTL: Fix file descriptor leak
Linus Torvalds [Sat, 5 Nov 2016 03:12:10 +0000 (20:12 -0700)]
Merge tag 'nfsd-4.9-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd bugfixes from Bruce Fields:
"Fixes for some recent regressions including fallout from the vmalloc'd
stack change (after which we can no longer encrypt stuff on the
stack)"
* tag 'nfsd-4.9-1' of git://linux-nfs.org/~bfields/linux:
nfsd: Fix general protection fault in release_lock_stateid()
svcrdma: backchannel cannot share a page for send and rcv buffers
sunrpc: fix some missing rq_rbuffer assignments
sunrpc: don't pass on-stack memory to sg_set_buf
nfsd: move blocked lock handling under a dedicated spinlock
Linus Torvalds [Sat, 5 Nov 2016 03:08:16 +0000 (20:08 -0700)]
Merge branch 'for-4.9-rc3' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from Chris Mason:
"Some fixes that Dave Sterba collected. We held off on these last week
because I was focused on the memory corruption testing"
* 'for-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix WARNING in btrfs_select_ref_head()
Btrfs: remove some no-op casts
btrfs: pass correct args to btrfs_async_run_delayed_refs()
btrfs: make file clone aware of fatal signals
btrfs: qgroup: Prevent qgroup->reserved from going subzero
Btrfs: kill BUG_ON in do_relocation
Linus Torvalds [Sat, 5 Nov 2016 03:03:14 +0000 (20:03 -0700)]
Merge branch 'overlayfs-linus' of git://git./linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Fix two more POSIX ACL bugs introduced in 4.8 and add a missing fsync
during copy up to prevent possible data loss"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: fsync after copy-up
ovl: fix get_acl() on tmpfs
ovl: update S_ISGID when setting posix ACLs
Linus Torvalds [Fri, 4 Nov 2016 20:30:13 +0000 (13:30 -0700)]
Merge tag 'drm-fixes-for-v4.9-rc4' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Fixes for amdgpu, radeon, intel, imx and virtio-gpu.
This is a bit larger than I'd like, but I had some stuff I meant to
send for -rc3 but was waiting for the PAT regression fix to land. So
this is really fixes for rc3 and rc4 in one go.
There are a set of fixes for an oops we've been seeing around MST
display unplug, along with more suspend/resume and shutdown fixes for
amdgpu, one power management follow on fix for nouveau, and set of imx
fixes, and a single virtio-gpu regression fix"
* tag 'drm-fixes-for-v4.9-rc4' of git://people.freedesktop.org/~airlied/linux: (54 commits)
virtio-gpu: fix vblank events
drm/nouveau/acpi: fix check for power resources support
drm/i915: Fix SKL+ 90/270 degree rotated plane coordinate computation
drm/i915: Remove two invalid warns
drm/i915: Rotated view does not need a fence
drm/i915/fbc: fix CFB size calculation for gen8+
drm: i915: Wait for fences on new fb, not old
drm/i915: Clean up DDI DDC/AUX CH sanitation
drm/i915: Respect alternate_aux_channel for all DDI ports
drm/i915/gen9: fix watermarks when using the pipe scaler
drm/i915: Fix mismatched INIT power domain disabling during suspend
drm/i915: fix a read size argument
drm/i915: Use fence_write() from rpm resume
drm/i915/gen9: fix DDB partitioning for multi-screen cases
drm/i915: workaround sparse warning on variable length arrays
drm/i915: keep declarations in i915_drv.h
drm/amd/powerplay: fix bug get wrong evv voltage of Polaris.
drm/amdgpu/si_dpm: workaround for SI kickers
drm/radeon/si_dpm: workaround for SI kickers
drm/amdgpu: fix s3 resume back, uvd dpm randomly can't disable.
...
Niklas Cassel [Fri, 14 Oct 2016 21:54:55 +0000 (23:54 +0200)]
PCI: designware: Check for iATU unroll support after initializing host
dw_pcie_iatu_unroll_enabled() reads a dbi_base register. Reading any
dbi_base register before pp->ops->host_init has been called causes
"imprecise external abort" on platforms like ARTPEC-6, where the PCIe
module is disabled at boot and first enabled in pp->ops->host_init. Move
dw_pcie_iatu_unroll_enabled() to dw_pcie_setup_rc(), since it is after
pp->ops->host_init, but before pp->iatu_unroll_enabled is actually used.
Fixes:
a0601a470537 ("PCI: designware: Add iATU Unroll feature")
Tested-by: James Le Cuirot <chewi@gentoo.org>
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Acked-by: Olof Johansson <olof@lixom.net>
Linus Torvalds [Fri, 4 Nov 2016 20:08:05 +0000 (13:08 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"One NULL pointer dereference, and two fixes for regressions introduced
during the merge window.
The rest are fixes for MIPS, s390 and nested VMX"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: x86: Check memopp before dereference (CVE-2016-8630)
kvm: nVMX: VMCLEAR an active shadow VMCS after last use
KVM: x86: drop TSC offsetting kvm_x86_ops to fix KVM_GET/SET_CLOCK
KVM: x86: fix wbinvd_dirty_mask use-after-free
kvm/x86: Show WRMSR data is in hex
kvm: nVMX: Fix kernel panics induced by illegal INVEPT/INVVPID types
KVM: document lock orders
KVM: fix OOPS on flush_work
KVM: s390: Fix STHYI buffer alignment for diag224
KVM: MIPS: Precalculate MMIO load resume PC
KVM: MIPS: Make ERET handle ERL before EXL
KVM: MIPS: Fix lazy user ASID regenerate for SMP
Linus Torvalds [Fri, 4 Nov 2016 20:03:57 +0000 (13:03 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"A set of MIPS fixes for 4.9:
- lots of fixes for printk continuations
- six fixes for FP related code.
- fix max_low_pfn with disabled highmem
- fix KASLR handling of NULL FDT and KASLR for generic kernels
- fix build of compressed image
- provide default mips_cpc_default_phys_base to ignore CPC
- fix reboot on Malta"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: Fix max_low_pfn with disabled highmem
MIPS: Correct MIPS I FP sigcontext layout
MIPS: Fix ISA I/II FP signal context offsets
MIPS: Remove FIR from ISA I FP signal context
MIPS: Fix ISA I FP sigcontext access violation handling
MIPS: Fix FCSR Cause bit handling for correct SIGFPE issue
MIPS: ptrace: Also initialize the FP context on individual FCSR writes
MIPS: dump_tlb: Fix printk continuations
MIPS: Fix __show_regs() output
MIPS: traps: Fix output of show_code
MIPS: traps: Fix output of show_stacktrace
MIPS: traps: Fix output of show_backtrace
MIPS: Fix build of compressed image
MIPS: generic: Fix KASLR for generic kernel.
MIPS: KASLR: Fix handling of NULL FDT
MIPS: Malta: Fixup reboot
MIPS: CPC: Provide default mips_cpc_default_phys_base to ignore CPC
Linus Torvalds [Fri, 4 Nov 2016 20:01:13 +0000 (13:01 -0700)]
Merge branch 'parisc-4.9-3' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"The first three patches are trivial and add some required KERN_CONT,
ignore the new pkey syscalls on parisc and use the LINUX_GATEWAY_ADDR
define instead of hardcoded values.
The two patches from Dave Anglin are important.
The first one avoids trashing the sr2 and sr3 space registers in the
Light-weight syscall path. Especially the usage of sr3 is critical
since it may get trashed by the interrupt handler.
The second patch is even more important and tagged for stable series.
It protects one critical section in the syscall entry path by
disabling local interrupts. Without disabling interrupts, the sr7
space register may not be in sync with the current stack setup and
thus an incoming hardware interrupt may destroy memory in random
userspace areas"
* 'parisc-4.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Ignore the pkey system calls for now
parisc: Use LINUX_GATEWAY_ADDR define instead of hardcoded value
parisc: Ensure consistent state when switching to kernel stack at syscall entry
parisc: Avoid trashing sr2 and sr3 in LWS code
parisc: use KERN_CONT when printing device inventory
Vladimir Zapolskiy [Mon, 31 Oct 2016 19:46:24 +0000 (21:46 +0200)]
i2c: core: fix NULL pointer dereference under race condition
Race condition between registering an I2C device driver and
deregistering an I2C adapter device which is assumed to manage that
I2C device may lead to a NULL pointer dereference due to the
uninitialized list head of driver clients.
The root cause of the issue is that the I2C bus may know about the
registered device driver and thus it is matched by bus_for_each_drv(),
but the list of clients is not initialized and commonly it is NULL,
because I2C device drivers define struct i2c_driver as static and
clients field is expected to be initialized by I2C core:
i2c_register_driver() i2c_del_adapter()
driver_register() ...
bus_add_driver() ...
... bus_for_each_drv(..., __process_removed_adapter)
... i2c_do_del_adapter()
... list_for_each_entry_safe(..., &driver->clients, ...)
INIT_LIST_HEAD(&driver->clients);
To solve the problem it is sufficient to do clients list head
initialization before calling driver_register().
The problem was found while using an I2C device driver with a sluggish
registration routine on a bus provided by a physically detachable I2C
master controller, but practically the oops may be reproduced under
the race between arbitraty I2C device driver registration and managing
I2C bus device removal e.g. by unbinding the latter over sysfs:
% echo
21a4000.i2c > /sys/bus/platform/drivers/imx-i2c/unbind
Unable to handle kernel NULL pointer dereference at virtual address
00000000
Internal error: Oops: 17 [#1] SMP ARM
CPU: 2 PID: 533 Comm: sh Not tainted 4.9.0-rc3+ #61
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
task:
e5ada400 task.stack:
e4936000
PC is at i2c_do_del_adapter+0x20/0xcc
LR is at __process_removed_adapter+0x14/0x1c
Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control:
10c5387d Table:
35bd004a DAC:
00000051
Process sh (pid: 533, stack limit = 0xe4936210)
Stack: (0xe4937d28 to 0xe4938000)
Backtrace:
[<
c0667be0>] (i2c_do_del_adapter) from [<
c0667cc0>] (__process_removed_adapter+0x14/0x1c)
[<
c0667cac>] (__process_removed_adapter) from [<
c0516998>] (bus_for_each_drv+0x6c/0xa0)
[<
c051692c>] (bus_for_each_drv) from [<
c06685ec>] (i2c_del_adapter+0xbc/0x284)
[<
c0668530>] (i2c_del_adapter) from [<
bf0110ec>] (i2c_imx_remove+0x44/0x164 [i2c_imx])
[<
bf0110a8>] (i2c_imx_remove [i2c_imx]) from [<
c051a838>] (platform_drv_remove+0x2c/0x44)
[<
c051a80c>] (platform_drv_remove) from [<
c05183d8>] (__device_release_driver+0x90/0x12c)
[<
c0518348>] (__device_release_driver) from [<
c051849c>] (device_release_driver+0x28/0x34)
[<
c0518474>] (device_release_driver) from [<
c0517150>] (unbind_store+0x80/0x104)
[<
c05170d0>] (unbind_store) from [<
c0516520>] (drv_attr_store+0x28/0x34)
[<
c05164f8>] (drv_attr_store) from [<
c0298acc>] (sysfs_kf_write+0x50/0x54)
[<
c0298a7c>] (sysfs_kf_write) from [<
c029801c>] (kernfs_fop_write+0x100/0x214)
[<
c0297f1c>] (kernfs_fop_write) from [<
c0220130>] (__vfs_write+0x34/0x120)
[<
c02200fc>] (__vfs_write) from [<
c0221088>] (vfs_write+0xa8/0x170)
[<
c0220fe0>] (vfs_write) from [<
c0221e74>] (SyS_write+0x4c/0xa8)
[<
c0221e28>] (SyS_write) from [<
c0108a20>] (ret_fast_syscall+0x0/0x1c)
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
James Hogan [Tue, 1 Nov 2016 13:59:09 +0000 (13:59 +0000)]
MIPS: Fix max_low_pfn with disabled highmem
When low memory doesn't reach HIGHMEM_START (e.g. up to 256MB at PA=0 is
common) and highmem is present above HIGHMEM_START (e.g. on Malta the
RAM overlayed by the IO region is aliased at PA=0x90000000), max_low_pfn
will be initially calculated very large and then clipped down to
HIGHMEM_START.
This causes crashes when reading /sys/kernel/mm/page_idle/bitmap
(i.e. CONFIG_IDLE_PAGE_TRACKING=y) when highmem is disabled. pfn_valid()
will compare against max_mapnr which is derived from max_low_pfn when
there is no highend_pfn set up, and will return true for PFNs right up
to HIGHMEM_START, even though they are beyond the end of low memory and
no page structs will actually exist for these PFNs.
This is fixed by skipping high memory regions when initially calculating
max_low_pfn if highmem is disabled, so it doesn't get clipped too high.
We also clip regions which overlap the highmem boundary when highmem is
disabled, so that max_pfn doesn't extend into highmem either.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14490/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Maciej W. Rozycki [Mon, 31 Oct 2016 16:27:40 +0000 (16:27 +0000)]
MIPS: Correct MIPS I FP sigcontext layout
Complement commit
80cbfad79096 ("MIPS: Correct MIPS I FP context
layout") and correct the way Floating Point General registers are stored
in a signal context with MIPS I hardware.
Use the S.D and L.D assembly macros to have pairs of SWC1 instructions
and pairs of LWC1 instructions produced, respectively, in an arrangement
which makes the memory representation of floating-point data passed
compatible with that used by hardware SDC1 and LDC1 instructions, where
available, regardless of the hardware endianness used. This matches the
layout used by r4k_fpu.S, ensuring run-time compatibility for MIPS I
software across all o32 hardware platforms.
Define an EX2 macro to handle exceptions from both hardware instructions
implicitly produced from S.D and L.D assembly macros.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14477/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Maciej W. Rozycki [Mon, 31 Oct 2016 16:27:01 +0000 (16:27 +0000)]
MIPS: Fix ISA I/II FP signal context offsets
Fix a regression introduced with commit
2db9ca0a3551 ("MIPS: Use struct
mips_abi offsets to save FP context") for MIPS I/I FP signal contexts,
by converting save/restore code to the updated internal API. Start FGR
offsets from 0 rather than SC_FPREGS from $a0 and use $a1 rather than
the offset of SC_FPC_CSR from $a0 for the Floating Point Control/Status
Register (FCSR).
Document the new internal API and adjust assembly code formatting for
consistency.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14476/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Maciej W. Rozycki [Mon, 31 Oct 2016 16:26:24 +0000 (16:26 +0000)]
MIPS: Remove FIR from ISA I FP signal context
Complement commit
e50c0a8fa60d ("Support the MIPS32 / MIPS64 DSP ASE.")
and remove the Floating Point Implementation Register (FIR) from the FP
register set recorded in a signal context with MIPS I processors too, in
line with the change applied to r4k_fpu.S.
The `sc_fpc_eir' slot is unused according to our current ABI and the FIR
register is read-only and always directly accessible from user software.
[ralf@linux-mips.org: This is also required because the next commit depends
on it.]
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14475/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Maciej W. Rozycki [Mon, 31 Oct 2016 16:25:44 +0000 (16:25 +0000)]
MIPS: Fix ISA I FP sigcontext access violation handling
Complement commit
0ae8dceaebe3 ("Merge with 2.3.10.") and use the local
`fault' handler to recover from FP sigcontext access violation faults,
like corresponding code does in r4k_fpu.S. The `bad_stack' handler is
in syscall.c and is not suitable here as we want to propagate the error
condition up through the caller rather than killing the thread outright.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14474/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Maciej W. Rozycki [Fri, 28 Oct 2016 07:21:03 +0000 (08:21 +0100)]
MIPS: Fix FCSR Cause bit handling for correct SIGFPE issue
Sanitize FCSR Cause bit handling, following a trail of past attempts:
* commit
4249548454f7 ("MIPS: ptrace: Fix FP context restoration FCSR
regression"),
* commit
443c44032a54 ("MIPS: Always clear FCSR cause bits after
emulation"),
* commit
64bedffe4968 ("MIPS: Clear [MSA]FPE CSR.Cause after
notify_die()"),
* commit
b1442d39fac2 ("MIPS: Prevent user from setting FCSR cause
bits"),
* commit
b54d2901517d ("Properly handle branch delay slots in connection
with signals.").
Specifically do not mask these bits out in ptrace(2) processing and send
a SIGFPE signal instead whenever a matching pair of an FCSR Cause and
Enable bit is seen as execution of an affected context is about to
resume. Only then clear Cause bits, and even then do not clear any bits
that are set but masked with the respective Enable bits. Adjust Cause
bit clearing throughout code likewise, except within the FPU emulator
proper where they are set according to IEEE 754 exceptions raised as the
operation emulated executed. Do so so that any IEEE 754 exceptions
subject to their default handling are recorded like with operations
executed by FPU hardware.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14460/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Maciej W. Rozycki [Fri, 28 Oct 2016 07:20:09 +0000 (08:20 +0100)]
MIPS: ptrace: Also initialize the FP context on individual FCSR writes
Complement commit
ac9ad83bc318 ("MIPS: prevent FP context set via ptrace
being discarded") and also initialize the FP context whenever FCSR alone
is written with a PTRACE_POKEUSR request addressing FPC_CSR, rather than
along with the full FPU register set in the case of the PTRACE_SETFPREGS
request.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14459/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
James Hogan [Fri, 21 Oct 2016 19:06:40 +0000 (20:06 +0100)]
MIPS: dump_tlb: Fix printk continuations
Since commit
4bcc595ccd80 ("printk: reinstate KERN_CONT for printing
continuation lines") the output from TLB dumps on MIPS has been
pretty unreadable due to the lack of KERN_CONT markers. Use pr_cont to
provide the appropriate markers & restore the expected output.
Continuation is also used for the second line of each TLB entry printed
in dump_tlb.c even though it has a newline, since it is a continuation
of the interpretation of the same TLB entry. For example:
[ 46.371884] Index: 0 pgmask=16kb va=
77654000 asid=73 gid=00
[ri=0 xi=0 pa=
ffc18000 c=5 d=0 v=1 g=0] [ri=0 xi=0 pa=
ffc1c000 c=5 d=0 v=1 g=0]
[ 46.385380] Index: 12 pgmask=16kb va=
004b4000 asid=73 gid=00
[ri=0 xi=0 pa=
00000000 c=0 d=0 v=0 g=0] [ri=0 xi=0 pa=
ffb00000 c=5 d=1 v=1 g=0]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14444/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Wed, 19 Oct 2016 13:33:23 +0000 (14:33 +0100)]
MIPS: Fix __show_regs() output
Since commit
4bcc595ccd80 ("printk: reinstate KERN_CONT for printing
continuation lines") the output from __show_regs() on MIPS has been
pretty unreadable due to the lack of KERN_CONT markers. Use pr_cont to
provide the appropriate markers & restore the expected register output.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14432/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Matt Redfearn [Wed, 19 Oct 2016 13:33:22 +0000 (14:33 +0100)]
MIPS: traps: Fix output of show_code
Since commit
4bcc595ccd80 ("printk: reinstate KERN_CONT for printing
continuation lines") the output from show_code on MIPS has been
pretty unreadable due to the lack of KERN_CONT markers. Use pr_cont to
provide the appropriate markers & restore the expected output.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14431/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Matt Redfearn [Wed, 19 Oct 2016 13:33:21 +0000 (14:33 +0100)]
MIPS: traps: Fix output of show_stacktrace
Since commit
4bcc595ccd80 ("printk: reinstate KERN_CONT for printing
continuation lines") the output from show_stacktrace on MIPS has been
pretty unreadable due to the lack of KERN_CONT markers. Use pr_cont to
provide the appropriate markers & restore the expected output. Also
start a new line with printk such that the presence of timing
information does not interfere with output.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14430/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Matt Redfearn [Wed, 19 Oct 2016 13:33:20 +0000 (14:33 +0100)]
MIPS: traps: Fix output of show_backtrace
Since commit
4bcc595ccd80 ("printk: reinstate KERN_CONT for printing
continuation lines") the output from show_backtrace on MIPS has been
pretty unreadable due to the lack of KERN_CONT markers. Use pr_cont to
provide the appropriate markers & restore the expected output.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14429/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Matt Redfearn [Mon, 17 Oct 2016 09:09:39 +0000 (10:09 +0100)]
MIPS: Fix build of compressed image
Changes introduced to arch/mips/Makefile for the generic kernel resulted
in build errors when making a compressed image if platform-y has multiple
values, like this:
make[2]: *** No rule to make target `alchemy/'.
make[1]: *** [vmlinuz] Error 2
make[1]: Target `_all' not remade because of errors.
make: *** [sub-make] Error 2
make: Target `_all' not remade because of errors.
Fix this by quoting $(platform-y) as it is passed to the Makefile in
arch/mips/boot/compressed/Makefile
Reported-by: kernelci.org bot <bot@kernelci.org>
Link: https://storage.kernelci.org/next/next-20161017/mips-gpr_defconfig/build.log
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14405/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Matt Redfearn [Mon, 17 Oct 2016 16:25:24 +0000 (17:25 +0100)]
MIPS: generic: Fix KASLR for generic kernel.
The KASLR code requires that the plat_get_fdt() function return the
address of the device tree, and it must be available early in the boot,
before prom_init() is called. Move the code determining the address of
the device tree into plat_get_fdt, and call that from prom_init().
The fdt pointer will be set up by plat_get_fdt() called from
relocate_kernel initially and once the relocated kernel has started,
prom_init() will use it again to determine the address in the relocated
image.
Fixes:
eed0eabd12ef ("MIPS: generic: Introduce generic DT-based board support")
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14415/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Matt Redfearn [Mon, 17 Oct 2016 16:21:46 +0000 (17:21 +0100)]
MIPS: KASLR: Fix handling of NULL FDT
If platform code returns a NULL pointer to the FDT, initial_boot_params
will not get set to a valid pointer and attempting to find the /chosen
node in it will cause a NULL pointer dereference and the kernel to crash
immediately on startup - with no output to the console.
Fix this by checking that initial_boot_params is valid before using it.
Fixes:
405bc8fd12f5 ("MIPS: Kernel: Implement KASLR using CONFIG_RELOCATABLE")
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14414/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Fri, 14 Oct 2016 09:17:32 +0000 (10:17 +0100)]
MIPS: Malta: Fixup reboot
Commit
10b6ea0959de ("MIPS: Malta: Use syscon-reboot driver to reboot")
converted the Malta board to use the generic syscon-reboot driver to
handle reboots, but incorrectly used the value 0x4d rather than 0x42 as
the magic to write to the reboot register.
I also incorrectly believed that syscon/regmap would default to native
endianness, but this isn't the case. Force this by specifying with a
native-endian property in the devicetree.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes:
10b6ea0959de ("MIPS: Malta: Use syscon-reboot driver to reboot")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: linux-mips@linux-mips.org
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Maciej W. Rozycki <macro@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/14396/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Sat, 15 Oct 2016 22:03:43 +0000 (23:03 +0100)]
MIPS: CPC: Provide default mips_cpc_default_phys_base to ignore CPC
Provide a default implementation of mips_cpc_default_phys_base() which
simply returns 0, and adjust mips_cpc_phys_base() to allow for
mips_cpc_default_phys_base() returning 0. This allows kernels which
include CPC support to be built without platform code & simply ignore
the CPC if it wasn't already enabled by the bootloader.
This fixes link failures such as the following from generic defconfigs:
arch/mips/built-in.o: In function `mips_cpc_phys_base':
arch/mips/kernel/mips-cpc.c:47: undefined reference to `mips_cpc_default_phys_base'
[ralf@linux-mips.org: changed prototype for coding style compliance.]
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14401/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Stefan Richter [Sun, 30 Oct 2016 16:32:01 +0000 (17:32 +0100)]
firewire: net: fix fragmented datagram_size off-by-one
RFC 2734 defines the datagram_size field in fragment encapsulation
headers thus:
datagram_size: The encoded size of the entire IP datagram. The
value of datagram_size [...] SHALL be one less than the value of
Total Length in the datagram's IP header (see STD 5, RFC 791).
Accordingly, the eth1394 driver of Linux 2.6.36 and older set and got
this field with a -/+1 offset:
ether1394_tx() /* transmit */
ether1394_encapsulate_prep()
hdr->ff.dg_size = dg_size - 1;
ether1394_data_handler() /* receive */
if (hdr->common.lf == ETH1394_HDR_LF_FF)
dg_size = hdr->ff.dg_size + 1;
else
dg_size = hdr->sf.dg_size + 1;
Likewise, I observe OS X 10.4 and Windows XP Pro SP3 to transmit 1500
byte sized datagrams in fragments with datagram_size=1499 if link
fragmentation is required.
Only firewire-net sets and gets datagram_size without this offset. The
result is lacking interoperability of firewire-net with OS X, Windows
XP, and presumably Linux' eth1394. (I did not test with the latter.)
For example, FTP data transfers to a Linux firewire-net box with max_rec
smaller than the 1500 bytes MTU
- from OS X fail entirely,
- from Win XP start out with a bunch of fragmented datagrams which
time out, then continue with unfragmented datagrams because Win XP
temporarily reduces the MTU to 576 bytes.
So let's fix firewire-net's datagram_size accessors.
Note that firewire-net thereby loses interoperability with unpatched
firewire-net, but only if link fragmentation is employed. (This happens
with large broadcast datagrams, and with large datagrams on several
FireWire CardBus cards with smaller max_rec than equivalent PCI cards,
and it can be worked around by setting a small enough MTU.)
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>