OSDN Git Service
Stefan Hajnoczi [Wed, 26 Mar 2014 12:06:00 +0000 (13:06 +0100)]
dmg: prevent chunk buffer overflow (CVE-2014-0145)
Both compressed and uncompressed I/O is buffered. dmg_open() calculates
the maximum buffer size needed from the metadata in the image file.
There is currently a buffer overflow since ->lengths[] is accounted
against the maximum compressed buffer size but actually uses the
uncompressed buffer:
switch (s->types[chunk]) {
case 1: /* copy */
ret = bdrv_pread(bs->file, s->offsets[chunk],
s->uncompressed_chunk, s->lengths[chunk]);
We must account against the maximum uncompressed buffer size for type=1
chunks.
This patch fixes the maximum buffer size calculation to take into
account the chunk type. It is critical that we update the correct
maximum since there are two buffers ->compressed_chunk and
->uncompressed_chunk.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 26 Mar 2014 12:05:59 +0000 (13:05 +0100)]
dmg: use uint64_t consistently for sectors and lengths
The DMG metadata is stored as uint64_t, so use the same type for
sector_num. int was a particularly poor choice since it is only 32-bit
and would truncate large values.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 26 Mar 2014 12:05:58 +0000 (13:05 +0100)]
dmg: sanitize chunk length and sectorcount (CVE-2014-0145)
Chunk length and sectorcount are used for decompression buffers as well
as the bdrv_pread() count argument. Ensure that they have reasonable
values so neither memory allocation nor conversion from uint64_t to int
will cause problems.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 26 Mar 2014 12:05:57 +0000 (13:05 +0100)]
dmg: use appropriate types when reading chunks
Use the right types instead of signed int:
size_t new_size;
This is a byte count for g_realloc() that is calculated from uint32_t
and size_t values.
uint32_t chunk_count;
Use the same type as s->n_chunks, which is used together with
chunk_count.
This patch is a cleanup and does not fix bugs.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 26 Mar 2014 12:05:56 +0000 (13:05 +0100)]
dmg: drop broken bdrv_pread() loop
It is not necessary to check errno for EINTR and the block layer does
not produce short reads. Therefore we can drop the loop that attempts
to read a compressed chunk.
The loop is buggy because it incorrectly adds the transferred bytes
twice:
do {
ret = bdrv_pread(...);
i += ret;
} while (ret >= 0 && ret + i < s->lengths[chunk]);
Luckily we can drop the loop completely and perform a single
bdrv_pread().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 26 Mar 2014 12:05:55 +0000 (13:05 +0100)]
dmg: prevent out-of-bounds array access on terminator
When a terminator is reached the base for offsets and sectors is stored.
The following records that are processed will use this base value.
If the first record we encounter is a terminator, then calculating the
base values would result in out-of-bounds array accesses. Don't do
that.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 26 Mar 2014 12:05:54 +0000 (13:05 +0100)]
dmg: coding style and indentation cleanup
Clean up the mix of tabs and spaces, as well as the coding style
violations in block/dmg.c. There are no semantic changes since this
patch simply reformats the code.
This patch is necessary before we can make meaningful changes to this
file, due to the inconsistent formatting and confusing indentation.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 26 Mar 2014 12:05:53 +0000 (13:05 +0100)]
qcow2: Fix new L1 table size check (CVE-2014-0143)
The size in bytes is assigned to an int later, so check that instead of
the number of entries.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 26 Mar 2014 12:05:52 +0000 (13:05 +0100)]
qcow2: Protect against some integer overflows in bdrv_check
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 26 Mar 2014 12:05:51 +0000 (13:05 +0100)]
qcow2: Fix types in qcow2_alloc_clusters and alloc_clusters_noref
In order to avoid integer overflows.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 26 Mar 2014 12:05:50 +0000 (13:05 +0100)]
qcow2: Check new refcount table size on growth
If the size becomes larger than what qcow2_open() would accept, fail the
growing operation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 26 Mar 2014 12:05:49 +0000 (13:05 +0100)]
qcow2: Avoid integer overflow in get_refcount (CVE-2014-0143)
This ensures that the checks catch all invalid cluster indexes
instead of returning the refcount of a wrong cluster.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Fri, 28 Mar 2014 17:06:31 +0000 (18:06 +0100)]
qcow2: Don't rely on free_cluster_index in alloc_refcount_block() (CVE-2014-0147)
free_cluster_index is only correct if update_refcount() was called from
an allocation function, and even there it's brittle because it's used to
protect unfinished allocations which still have a refcount of 0 - if it
moves in the wrong place, the unfinished allocation can be corrupted.
So not using it any more seems to be a good idea. Instead, use the
first requested cluster to do the calculations. Return -EAGAIN if
unfinished allocations could become invalid and let the caller restart
its search for some free clusters.
The context of creating a snapsnot is one situation where
update_refcount() is called outside of a cluster allocation. For this
case, the change fixes a buffer overflow if a cluster is referenced in
an L2 table that cannot be represented by an existing refcount block.
(new_table[refcount_table_index] was out of bounds)
[Bump the qemu-iotests 026 refblock_alloc.write leak count from 10 to
11.
--Stefan]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 26 Mar 2014 12:05:47 +0000 (13:05 +0100)]
qcow2: Fix backing file name length check
len could become negative and would pass the check then. Nothing bad
happened because bdrv_pread() happens to return an error for negative
length values, but make variables for sizes unsigned anyway.
This patch also changes the behaviour to error out on invalid lengths
instead of silently truncating it to 1023.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 26 Mar 2014 12:05:46 +0000 (13:05 +0100)]
qcow2: Validate active L1 table offset and size (CVE-2014-0144)
This avoids an unbounded allocation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 26 Mar 2014 12:05:45 +0000 (13:05 +0100)]
qcow2: Validate snapshot table offset/size (CVE-2014-0144)
This avoid unbounded memory allocation and fixes a potential buffer
overflow on 32 bit hosts.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 26 Mar 2014 12:05:44 +0000 (13:05 +0100)]
qcow2: Validate refcount table offset
The end of the refcount table must not exceed INT64_MAX so that integer
overflows are avoided.
Also check for misaligned refcount table. Such images are invalid and
probably the result of data corruption. Error out to avoid further
corruption.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 26 Mar 2014 12:05:43 +0000 (13:05 +0100)]
qcow2: Check refcount table size (CVE-2014-0144)
Limit the in-memory reference count table size to 8 MB, it's enough in
practice. This fixes an unbounded allocation as well as a buffer
overflow in qcow2_refcount_init().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 26 Mar 2014 12:05:42 +0000 (13:05 +0100)]
qcow2: Check backing_file_offset (CVE-2014-0144)
Header, header extension and the backing file name must all be stored in
the first cluster. Setting the backing file to a much higher value
allowed header extensions to become much bigger than we want them to be
(unbounded allocation).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 26 Mar 2014 12:05:41 +0000 (13:05 +0100)]
qcow2: Check header_length (CVE-2014-0144)
This fixes an unbounded allocation for s->unknown_header_fields.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fam Zheng [Wed, 26 Mar 2014 12:05:40 +0000 (13:05 +0100)]
curl: check data size before memcpy to local buffer. (CVE-2014-0144)
curl_read_cb is callback function for libcurl when data arrives. The
data size passed in here is not guaranteed to be within the range of
request we submitted, so we may overflow the guest IO buffer. Check the
real size we have before memcpy to buffer to avoid overflow.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Jeff Cody [Wed, 26 Mar 2014 12:05:39 +0000 (13:05 +0100)]
vhdx: Bounds checking for block_size and logical_sector_size (CVE-2014-0148)
Other variables (e.g. sectors_per_block) are calculated using these
variables, and if not range-checked illegal values could be obtained
causing infinite loops and other potential issues when calculating
BAT entries.
The 1.00 VHDX spec requires BlockSize to be min 1MB, max 256MB.
LogicalSectorSize is required to be either 512 or 4096 bytes.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Jeff Cody [Fri, 28 Mar 2014 15:42:24 +0000 (11:42 -0400)]
vdi: add bounds checks for blocks_in_image and disk_size header fields (CVE-2014-0144)
The maximum blocks_in_image is 0xffffffff / 4, which also limits the
maximum disk_size for a VDI image to 1024TB. Note that this is the maximum
size that QEMU will currently support with this driver, not necessarily the
maximum size allowed by the image format.
This also fixes an incorrect error message, a bug introduced by commit
5b7aa9b56d1bfc79916262f380c3fc7961becb50 (Reported by Stefan Weil)
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 26 Mar 2014 12:05:37 +0000 (13:05 +0100)]
vpc: Validate block size (CVE-2014-0142)
This fixes some cases of division by zero crashes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Jeff Cody [Wed, 26 Mar 2014 12:05:36 +0000 (13:05 +0100)]
vpc/vhd: add bounds check for max_table_entries and block_size (CVE-2014-0144)
This adds checks to make sure that max_table_entries and block_size
are in sane ranges. Memory is allocated based on max_table_entries,
and block_size is used to calculate indices into that allocated
memory, so if these values are incorrect that can lead to potential
unbounded memory allocation, or invalid memory accesses.
Also, the allocation of the pagetable is changed from g_malloc0()
to qemu_blockalign().
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 26 Mar 2014 12:05:35 +0000 (13:05 +0100)]
bochs: Fix bitmap offset calculation
32 bit truncation could let us access the wrong offset in the image.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 26 Mar 2014 12:05:34 +0000 (13:05 +0100)]
bochs: Check extent_size header field (CVE-2014-0142)
This fixes two possible division by zero crashes: In bochs_open() and in
seek_to_sector().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 26 Mar 2014 12:05:33 +0000 (13:05 +0100)]
bochs: Check catalog_size header field (CVE-2014-0143)
It should neither become negative nor allow unbounded memory
allocations. This fixes aborts in g_malloc() and an s->catalog_bitmap
buffer overflow on big endian hosts.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 26 Mar 2014 12:05:32 +0000 (13:05 +0100)]
bochs: Use unsigned variables for offsets and sizes (CVE-2014-0147)
Gets us rid of integer overflows resulting in negative sizes which
aren't correctly checked.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 26 Mar 2014 12:05:31 +0000 (13:05 +0100)]
bochs: Unify header structs and make them QEMU_PACKED
This is an on-disk structure, so offsets must be accurate.
Before this patch, sizeof(bochs) != sizeof(header_v1), which makes the
memcpy() between both invalid. We're lucky enough that the destination
buffer happened to be the larger one, and the memcpy size to be taken
from the smaller one, so we didn't get a buffer overflow in practice.
This patch unifies the both structures, eliminating the need to do a
memcpy in the first place. The common fields are extracted to the top
level of the struct and the actually differing part gets a union of the
two versions.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 26 Mar 2014 12:05:30 +0000 (13:05 +0100)]
qemu-iotests: Support for bochs format
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 26 Mar 2014 12:05:29 +0000 (13:05 +0100)]
block/cloop: fix offsets[] size off-by-one
cloop stores the number of compressed blocks in the n_blocks header
field. The file actually contains n_blocks + 1 offsets, where the extra
offset is the end-of-file offset.
The following line in cloop_read_block() results in an out-of-bounds
offsets[] access:
uint32_t bytes = s->offsets[block_num + 1] - s->offsets[block_num];
This patch allocates and loads the extra offset so that
cloop_read_block() works correctly when the last block is accessed.
Notice that we must free s->offsets[] unconditionally now since there is
always an end-of-file offset.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 26 Mar 2014 12:05:28 +0000 (13:05 +0100)]
block/cloop: refuse images with bogus offsets (CVE-2014-0144)
The offsets[] array allows efficient seeking and tells us the maximum
compressed data size. If the offsets are bogus the maximum compressed
data size will be unrealistic.
This could cause g_malloc() to abort and bogus offsets mean the image is
broken anyway. Therefore we should refuse such images.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 26 Mar 2014 12:05:27 +0000 (13:05 +0100)]
block/cloop: refuse images with huge offsets arrays (CVE-2014-0144)
Limit offsets_size to 512 MB so that:
1. g_malloc() does not abort due to an unreasonable size argument.
2. offsets_size does not overflow the bdrv_pread() int size argument.
This limit imposes a maximum image size of 16 TB at 256 KB block size.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 26 Mar 2014 12:05:26 +0000 (13:05 +0100)]
block/cloop: prevent offsets_size integer overflow (CVE-2014-0143)
The following integer overflow in offsets_size can lead to out-of-bounds
memory stores when n_blocks has a huge value:
uint32_t n_blocks, offsets_size;
[...]
ret = bdrv_pread(bs->file, 128 + 4, &s->n_blocks, 4);
[...]
s->n_blocks = be32_to_cpu(s->n_blocks);
/* read offsets */
offsets_size = s->n_blocks * sizeof(uint64_t);
s->offsets = g_malloc(offsets_size);
[...]
for(i=0;i<s->n_blocks;i++) {
s->offsets[i] = be64_to_cpu(s->offsets[i]);
offsets_size can be smaller than n_blocks due to integer overflow.
Therefore s->offsets[] is too small when the for loop byteswaps offsets.
This patch refuses to open files if offsets_size would overflow.
Note that changing the type of offsets_size is not a fix since 32-bit
hosts still only have 32-bit size_t.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 26 Mar 2014 12:05:25 +0000 (13:05 +0100)]
block/cloop: validate block_size header field (CVE-2014-0144)
Avoid unbounded s->uncompressed_block memory allocation by checking that
the block_size header field has a reasonable value. Also enforce the
assumption that the value is a non-zero multiple of 512.
These constraints conform to cloop 2.639's code so we accept existing
image files.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 26 Mar 2014 12:05:24 +0000 (13:05 +0100)]
qemu-iotests: add cloop input validation tests
Add a cloop format-specific test case. Later patches add tests for
input validation to the script.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 26 Mar 2014 12:05:23 +0000 (13:05 +0100)]
qemu-iotests: add ./check -cloop support
Add the cloop block driver to qemu-iotests.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Prasad Joshi [Fri, 28 Mar 2014 17:38:58 +0000 (23:08 +0530)]
qcow2: fix two memory leaks in qcow2_open error code path
Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Markus Armbruster [Thu, 27 Mar 2014 12:35:31 +0000 (13:35 +0100)]
vvfat: Fix :floppy: option to suppress partition table
Regressed in commit
7ad9be6, v1.5.0.
Reported-by: Kiyokazu SUTO <suto@ks-and-ks.ne.jp>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Prasad Joshi [Tue, 25 Mar 2014 20:25:53 +0000 (01:55 +0530)]
qemu-img: Release reference to BlockDriverState
Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Steven Noonan [Fri, 28 Mar 2014 16:19:02 +0000 (17:19 +0100)]
configure: add option to disable -fstack-protector flags
The -fstack-protector flag family is useful for ensuring safety and for
debugging, but has a performance impact. Here are some boot time comparisons of
the various versions of -fstack-protector using qemu-system-arm on an x86_64
host:
# -fstack-protector-all
Startup finished in 1.810s (kernel) + 12.331s (initrd) + 49.016s (userspace) = 1min 3.159s
Startup finished in 1.801s (kernel) + 12.287s (initrd) + 47.925s (userspace) = 1min 2.013s
Startup finished in 1.812s (kernel) + 12.302s (initrd) + 47.995s (userspace) = 1min 2.111s
# -fstack-protector-strong
Startup finished in 1.744s (kernel) + 11.223s (initrd) + 44.688s (userspace) = 57.657s
Startup finished in 1.721s (kernel) + 11.222s (initrd) + 44.194s (userspace) = 57.138s
Startup finished in 1.693s (kernel) + 11.250s (initrd) + 44.426s (userspace) = 57.370s
# -fstack-protector
Startup finished in 1.705s (kernel) + 11.409s (initrd) + 43.563s (userspace) = 56.677s
Startup finished in 1.877s (kernel) + 11.137s (initrd) + 43.719s (userspace) = 56.734s
Startup finished in 1.708s (kernel) + 11.141s (initrd) + 43.628s (userspace) = 56.478s
# no stack protector
Startup finished in 1.743s (kernel) + 11.190s (initrd) + 43.709s (userspace) = 56.643s
Startup finished in 1.763s (kernel) + 11.216s (initrd) + 43.767s (userspace) = 56.747s
Startup finished in 1.711s (kernel) + 11.283s (initrd) + 43.878s (userspace) = 56.873s
This patch introduces a configure option to disable the stack protector
entirely, and conditional stack protector flag selection (in order,
based on availability): -fstack-protector-strong, -fstack-protector-all,
no stack protector.
Signed-off-by: Steven Noonan <snoonan@amazon.com>
Cc: Anthony Liguori <aliguori@amazon.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
[Prefer -fstack-protector-all to -fstack-protector, suggested by
Laurent Desnogues. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cole Robinson [Mon, 31 Mar 2014 18:31:44 +0000 (14:31 -0400)]
pci: Fix clearing IRQs on reset
irq_state is cleared before calling pci_device_deassert_intx, but the
latter misbehaves if the former isn't accurate. In this case, any raised
IRQs are not cleared, which hits an assertion in pcibus_reset:
qemu-system-x86_64: hw/pci/pci.c:250: pcibus_reset: Assertion
`bus->irq_count[i] == 0' failed.
pci_device_deassert_intx should clear irq_state anyways, so add
an assert.
This fixes migration with usb2 + usb-tablet.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-id:
7da1ad94ce027183b4049c2de370cb191b0073c1.
1396290569.git.crobinso@redhat.com
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 31 Mar 2014 17:47:14 +0000 (18:47 +0100)]
Merge remote-tracking branch 'remotes/afaerber/tags/qom-cpu-for-2.0' into staging
QOM CPUState refactorings / X86CPU
* X86CPU IA32e 1GB paging support
* Performance quickfix for CPU() cast macro
# gpg: Signature made Mon 31 Mar 2014 18:33:27 BST using RSA key ID
3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/qom-cpu-for-2.0:
cpu: Avoid QOM casts for CPU()
target-i386: x86_cpu_get_phys_page_debug(): support 1GB page translation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andreas Färber [Fri, 28 Mar 2014 15:25:07 +0000 (16:25 +0100)]
cpu: Avoid QOM casts for CPU()
CPU address spaces touching load and store helpers as well as the
movement of (almost) all fields from CPU_COMMON to CPUState have led to
a noticeable increase of CPU() usage in "hot" paths for both TCG and KVM.
While CPU()'s OBJECT_CHECK() might help detect development errors, i.e.
in form of crashes due to QOM vs. non-QOM mismatches rather than QOM
type mismatches, it is not really needed at runtime since mostly used in
CPU-specific paths, coming from a target-specific CPU subtype. If that
pointer is damaged, other errors are highly likely to occur elsewhere
anyway.
Keep the CPU() macro for a consistent developer experience and for
flexibility to exchange its implementation, but turn it into a pure,
unchecked C cast for now.
Compare commit
6e42be7cd10260fd3a006d94f6c870692bf7a2c0.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Luiz Capitulino [Wed, 19 Mar 2014 21:03:53 +0000 (17:03 -0400)]
target-i386: x86_cpu_get_phys_page_debug(): support 1GB page translation
Linux guests, when using more than 4GB of RAM, may end up using 1GB pages
to store (kernel) data. When this happens, we're unable to debug a running
Linux kernel with GDB:
(gdb) p node_data[0]->node_id
Cannot access memory at address 0xffff88013fffd3a0
(gdb)
GDB returns this error because x86_cpu_get_phys_page_debug() doesn't support
translating 1GB pages in IA-32e paging mode and returns an error to GDB.
This commit adds support for 1GB page translation for IA32e paging.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Thu, 20 Mar 2014 01:01:55 +0000 (02:01 +0100)]
make-release: Record SeaBIOS version
Before deleting .git, determine the version and save it in .version file.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id:
1395277315-7806-1-git-send-email-afaerber@suse.de
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 28 Mar 2014 14:52:27 +0000 (14:52 +0000)]
Merge remote-tracking branch 'remotes/rth/tcg-arm-unaligned' into staging
* remotes/rth/tcg-arm-unaligned:
tcg-arm: Avoid ldrd/strd for user-only emulation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 28 Mar 2014 13:46:28 +0000 (13:46 +0000)]
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi,pc,build bug fixes
Here are some bugfixes for 2.0.
A bugfix for acpi for pci bridges, and a build fix for
old systems without pthread_setname_np: both fix regressions
so we definitely want to include them.
HPET fix is not for a regression but looks very safe,
fixes a nasty bug and has been on list for a while.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 28 Mar 2014 12:00:12 GMT using RSA key ID
D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
acpi: fix ACPI generation for pci bridges
Don't enable a HPET timer if HPET is disabled
Detect pthread_setname_np at configure time
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Marcel Apfelbaum [Thu, 27 Mar 2014 15:35:36 +0000 (17:35 +0200)]
acpi: fix ACPI generation for pci bridges
Commit
8dcf525abc5dff785251a881f9764dd961065c0d
acpi-build: append description for non-hotplug
appended description for all occupied non hotpluggable PCI slots.
However the bridge devices are already added to SSDT,
adding them again will create an incorrect SSDT table.
Fixed by skipping the pci bridge devices, marking them as 'system'.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Richard Henderson [Tue, 25 Mar 2014 21:11:37 +0000 (17:11 -0400)]
tcg-arm: Avoid ldrd/strd for user-only emulation
The arm ldrd/strd insns must cause alignment traps, whereas
at least for armv7 ldr/str must handle unaligned operations.
While this is hardly the only problem facing user-only emu,
this solves one problem for i386 on armv7 emulation.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Peter Maydell [Thu, 27 Mar 2014 17:08:30 +0000 (17:08 +0000)]
Merge remote-tracking branch 'remotes/afaerber/tags/ppc-for-2.0' into staging
PowerPC queue for 2.0
* OpenPIC fix
* MSR fixes for POWER7 upwards
* TCG instruction set support fix for POWER8
# gpg: Signature made Thu 27 Mar 2014 16:12:12 GMT using RSA key ID
3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/ppc-for-2.0:
target-ppc: MSR_POW not supported on POWER7/7+/8
target-ppc: POWER7+ supports the MSR_VSX bit
target-ppc: POWER8 supports isel
target-ppc: POWER8 supports the MSR_LE bit
intc/openpic_kvm: Fix MemListener delete region callback function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 27 Mar 2014 16:38:58 +0000 (16:38 +0000)]
Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-2014-03-27' into staging
trivial patches for 2014-03-27
# gpg: Signature made Thu 27 Mar 2014 15:23:53 GMT using RSA key ID
74F0C838
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: E190 8639 3B10 B51B AC2C 8B73 5253 C5AD 74F0 C838
* remotes/mjt/tags/trivial-patches-2014-03-27: (23 commits)
linux-user: remove duplicate statement
hw/timer/grlib_gptimer: remove unnecessary assignment
hw/pci-host/apb.c: Avoid shifting left into sign bit
hw/intc/xilinx_intc: Avoid shifting left into sign bit
hw/intc/slavio_intctl: Avoid shifting left into sign bit
tests/libqos/pci-pc: Avoid shifting left into sign bit
hw/ppc: Avoid shifting left into sign bit
hw/intc/openpic: Avoid shifting left into sign bit
hw/usb/hcd-ohci.c: Avoid shifting left into sign bit
target-mips: Avoid shifting left into sign bit
hw/i386/acpi_build.c: Avoid shifting left into sign bit
hw/pci/pci_host.c: Avoid shifting left into sign bit
hw/intc/apic.c: Use uint32_t for mask word in foreach_apic
target-i386: Avoid shifting left into sign bit
CODING_STYLE: Section about mixed declarations
doc: update default PowerPC framebuffer settings
doc: update sun4m documentation
fix return check for KVM_GET_DIRTY_LOG ioctl
target-i386: Add missing 'static' and 'const' attributes
util: Add 'static' attribute to function implementation
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Matt Lupfer [Sat, 22 Feb 2014 04:37:23 +0000 (21:37 -0700)]
Don't enable a HPET timer if HPET is disabled
A HPET timer can be started when HPET is not yet
enabled. This will not generate an interrupt
to the guest, but causes problems when HPET is later
enabled.
A timer that is created and expires at least once before
HPET is enabled will have an initialized comparator based
on a hpet_offset of 0 (uninitialized). When HPET is
enabled, hpet_set_timer() is called a second time, which
modifies the timer expiry to a time based on the
difference between current ticks (measured with the
newly initialized hpet_offset) and the timer's
comparator (which was generated before hpet_offset was
initialized). This results in a long period of no HPET
timer ticks.
When this occurs with a CentOS 5.x guest, the guest
may not receive timer interrupts during its narrow
timer check window and panic on boot.
Signed-off-by: Matt Lupfer <mlupfer@ddn.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Dr. David Alan Gilbert [Wed, 12 Mar 2014 11:48:18 +0000 (11:48 +0000)]
Detect pthread_setname_np at configure time
Warn if no way of setting thread name is available.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Maydell [Thu, 27 Mar 2014 15:29:33 +0000 (15:29 +0000)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-
20140327' into staging
target-arm queue:
* Don't default to integratorcp board if no machine specified
# gpg: Signature made Thu 27 Mar 2014 14:09:12 GMT using RSA key ID
14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-
20140327:
vl.c: Improve message when no default machine is found
hw/arm: Stop specifying integratorcp as the default board
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Prasad Joshi [Sun, 23 Mar 2014 09:28:42 +0000 (14:58 +0530)]
linux-user: remove duplicate statement
Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Prasad Joshi [Sun, 23 Mar 2014 09:28:41 +0000 (14:58 +0530)]
hw/timer/grlib_gptimer: remove unnecessary assignment
Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Mon, 17 Mar 2014 16:00:41 +0000 (16:00 +0000)]
hw/pci-host/apb.c: Avoid shifting left into sign bit
Add U suffix to avoid undefined behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Mon, 17 Mar 2014 16:00:40 +0000 (16:00 +0000)]
hw/intc/xilinx_intc: Avoid shifting left into sign bit
Avoid undefined behaviour shifting left into the sign bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Mon, 17 Mar 2014 16:00:39 +0000 (16:00 +0000)]
hw/intc/slavio_intctl: Avoid shifting left into sign bit
Add 'U' suffix to avoid undefined behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Mon, 17 Mar 2014 16:00:38 +0000 (16:00 +0000)]
tests/libqos/pci-pc: Avoid shifting left into sign bit
Add U suffix when doing "1 << 31" to avoid undefined behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Mon, 17 Mar 2014 16:00:37 +0000 (16:00 +0000)]
hw/ppc: Avoid shifting left into sign bit
Add U suffix to various places where we were doing "1 << 31",
which is undefined behaviour, and also to other constant
definitions in the same groups, for consistency.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Mon, 17 Mar 2014 16:00:36 +0000 (16:00 +0000)]
hw/intc/openpic: Avoid shifting left into sign bit
Add U suffix to avoid undefined behaviour. This is only strictly
necessary for the 1 << 31 cases; for consistency we extend it
to other constants in the same group.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Mon, 17 Mar 2014 16:00:35 +0000 (16:00 +0000)]
hw/usb/hcd-ohci.c: Avoid shifting left into sign bit
Add U suffix to avoid undefined behaviour. This is only
strictly necessary for the 1<<31 cases, but we add it for the
other constants in these groups for consistency.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Mon, 17 Mar 2014 16:00:34 +0000 (16:00 +0000)]
target-mips: Avoid shifting left into sign bit
Add U suffix to various places where we shift a 1 left by 31,
to avoid undefined behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Mon, 17 Mar 2014 16:00:33 +0000 (16:00 +0000)]
hw/i386/acpi_build.c: Avoid shifting left into sign bit
Add U suffix to avoid undefined behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Mon, 17 Mar 2014 16:00:32 +0000 (16:00 +0000)]
hw/pci/pci_host.c: Avoid shifting left into sign bit
Add U suffix to avoid undefined behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Mon, 17 Mar 2014 16:00:31 +0000 (16:00 +0000)]
hw/intc/apic.c: Use uint32_t for mask word in foreach_apic
Use unsigned arithmetic for operations on the mask word
in the foreach_apic() macro, to avoid relying on undefined
behaviour when shifting into the sign bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Mon, 17 Mar 2014 16:00:30 +0000 (16:00 +0000)]
target-i386: Avoid shifting left into sign bit
Add 'U' suffixes where necessary to avoid (1 << 31) which
shifts left into the sign bit, which is undefined behaviour.
Add the suffix also for other constants in the same groupings
even if they don't shift into bit 31, for consistency.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Eduardo Habkost [Mon, 17 Mar 2014 18:26:31 +0000 (15:26 -0300)]
CODING_STYLE: Section about mixed declarations
We had an unwritten rule about declarations having to be at beginning of
blocks. Make it a written rule.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Mark Cave-Ayland [Mon, 17 Mar 2014 21:46:26 +0000 (21:46 +0000)]
doc: update default PowerPC framebuffer settings
Since 1.7, the default framebuffer settings for PowerPC are 800x600x32.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: qemu-ppc@nongnu.org
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Mark Cave-Ayland [Mon, 17 Mar 2014 21:46:25 +0000 (21:46 +0000)]
doc: update sun4m documentation
A few minor tidy-ups, plus add reference to the new -vga tcx and cg3 options.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Mario Smarduch [Wed, 19 Mar 2014 17:24:26 +0000 (10:24 -0700)]
fix return check for KVM_GET_DIRTY_LOG ioctl
Fix return condition check from kvm_vm_ioctl(s, KVM_GET_DIRTY_LOG, &d) to
handle internal failures or no support for memory slot dirty bitmap.
Otherwise the ioctl succeeds and continues with migration.
Addresses BUG#
1294227
Signed-off-by: Mario Smarduch <m.smarduch@samsung.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Stefan Weil [Sun, 16 Mar 2014 14:03:41 +0000 (15:03 +0100)]
target-i386: Add missing 'static' and 'const' attributes
This fixes warnings from the static code analysis (smatch).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Stefan Weil [Sun, 16 Mar 2014 18:02:52 +0000 (19:02 +0100)]
util: Add 'static' attribute to function implementation
The static code analyzer smatch complains because of a missing 'static'
attribute:
util/module.c:166:6: warning:
symbol 'module_load' was not declared. Should it be static?
'static' is used in the forward declaration, but not in the implementation.
Add it there, too.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Stefan Weil [Sun, 16 Mar 2014 18:13:18 +0000 (19:13 +0100)]
hw/ide: Add missing 'static' attributes
This fixes a warning from the static code analysis (smatch).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Stefan Weil [Sun, 16 Mar 2014 18:07:55 +0000 (19:07 +0100)]
target-arm: Add missing 'static' attribute
This fixes a warning from the static code analysis (smatch).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Stefan Weil [Sun, 16 Mar 2014 13:49:11 +0000 (14:49 +0100)]
target-s390x: Add missing 'static' and 'const' attributes
This fixes warnings from the static code analysis (smatch).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Anton Blanchard [Tue, 25 Mar 2014 02:40:29 +0000 (13:40 +1100)]
target-ppc: MSR_POW not supported on POWER7/7+/8
Remove MSR_POW from the msr_mask for POWER7/7P/8.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Cédric Le Goater <clg@fr.ibm.com>
Tested-by: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Anton Blanchard [Tue, 25 Mar 2014 02:40:28 +0000 (13:40 +1100)]
target-ppc: POWER7+ supports the MSR_VSX bit
Without MSR_VSX we die early during a Linux boot.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Cédric Le Goater <clg@fr.ibm.com>
Tested-by: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Anton Blanchard [Tue, 25 Mar 2014 02:40:27 +0000 (13:40 +1100)]
target-ppc: POWER8 supports isel
Add PPC_ISEL to insns_flags.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Cédric Le Goater <clg@fr.ibm.com>
Tested-by: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Anton Blanchard [Tue, 25 Mar 2014 02:40:26 +0000 (13:40 +1100)]
target-ppc: POWER8 supports the MSR_LE bit
Add MSR_LE to the msr_mask for POWER8.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Cédric Le Goater <clg@fr.ibm.com>
Tested-by: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Prasad Joshi [Sun, 23 Mar 2014 09:28:39 +0000 (14:58 +0530)]
intc/openpic_kvm: Fix MemListener delete region callback function
Fixes
d85937e683f6ff4d68293cb24c780fb1f6820d2c.
Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Peter Maydell [Thu, 27 Mar 2014 14:32:17 +0000 (14:32 +0000)]
Merge remote-tracking branch 'remotes/amit-migration/tags/for_upstream' into staging
migration: traces
Adds trace messages to migration path. Patches have been on list for a
while, and have been reviewed by Juan.
# gpg: Signature made Thu 27 Mar 2014 10:44:21 GMT using RSA key ID
854083B6
# gpg: Can't check signature: public key not found
* remotes/amit-migration/tags/for_upstream:
migration: add more traces
util: add qemu_ether_ntoa
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 27 Mar 2014 14:00:52 +0000 (14:00 +0000)]
vl.c: Improve message when no default machine is found
Improve the clarity of the message QEMU prints when the user
doesn't specify a machine model to use and there is no default.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Peter Maydell [Thu, 27 Mar 2014 14:00:52 +0000 (14:00 +0000)]
hw/arm: Stop specifying integratorcp as the default board
Currently for both qemu-system-arm and qemu-system-aarch64
the default board model if the user doesn't specify one
is the 'integratorcp'. This is a totally arbitrary historical
accident since it was the first board to be modelled.
That board is now just one target among many for us, and
is a very poor choice of default:
* it's an ancient board that is now only found in the
junkpiles of longtime ARM/Linux hackers, if at all
* it's an ARMv5 CPU, when most distros are now assuming
ARMv7
* it's pretty much unmaintained in QEMU
* it doesn't even have versatilepb's advantage of
supporting PCI
Making it or any other board the default serves only
to confuse people new to ARM who expect something more
like the x86 monoculture. Remove the is_default marker
from integratorcp, and don't set it for any other board,
to give users a nudge that they need to think about
which board they want a QEMU model of. (QEMU will produce
the admittedly slightly cryptic error "No machine found.")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Maydell [Thu, 27 Mar 2014 10:54:17 +0000 (10:54 +0000)]
Merge remote-tracking branch 'remotes/mcayland/qemu-sparc' into staging
* remotes/mcayland/qemu-sparc:
target-sparc: fix 32bit integer division overflow
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alexey Kardashevskiy [Mon, 10 Mar 2014 23:42:29 +0000 (10:42 +1100)]
migration: add more traces
This replaces DPRINTF macro with tracepoints.
This moves some messages from migration.c to savevm.c.
This adds tracepoint to signal about fileds failed to migrate.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Alexey Kardashevskiy [Mon, 10 Mar 2014 23:42:26 +0000 (10:42 +1100)]
util: add qemu_ether_ntoa
This adds a helper to format ethernet MAC address.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Olivier Danet [Fri, 21 Mar 2014 01:25:19 +0000 (02:25 +0100)]
target-sparc: fix 32bit integer division overflow
The signed integer division -0x8000_0000_0000_0000 / -1 must be handled
separately to avoid an overflow on the QEMU host.
Negative overflow must be a negative number for correct sign
extension in Sparc64 mode. Use <stdint.h> constants.
Signed-off-by: Olivier Danet <odanet@caramail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Peter Maydell [Wed, 26 Mar 2014 17:10:15 +0000 (17:10 +0000)]
Merge remote-tracking branch 'remotes/riku/for-2.0' into staging
* remotes/riku/for-2.0:
linux-user: Correct DLINFO_ITEMS
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Wed, 26 Mar 2014 16:17:36 +0000 (16:17 +0000)]
Merge remote-tracking branch 'remotes/bonzini/scsi-next' into staging
* remotes/bonzini/scsi-next:
spapr_vscsi: remove duplicate condition check
scsi: check req pointer before dereferencing it
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Wed, 26 Mar 2014 15:15:19 +0000 (15:15 +0000)]
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi,virtio bug fixes
Two bugfixes for virtio-net, and one for a recent
regression in acpi.
Both issues have been reported in the wild, so
I think it's preferable to merge these ASAP so
that reporters can make sure RC fixes their issue.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 26 Mar 2014 10:52:16 GMT using RSA key ID
D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
virtio-net: add vlan receive state to RxFilterInfo
virtio-net: Do not filter VLANs without F_CTRL_VLAN
Revert "acpi-test: rebuild SSDT"
acpi: make SSDT 1.0 spec compliant when possible
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Wed, 26 Mar 2014 14:07:25 +0000 (14:07 +0000)]
Merge remote-tracking branch 'remotes/weil/qemu-2.0' into staging
* remotes/weil/qemu-2.0:
gtk: Support GTK without VTE
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Prasad Joshi [Mon, 24 Mar 2014 15:44:46 +0000 (21:14 +0530)]
spapr_vscsi: remove duplicate condition check
Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prasad Joshi [Wed, 19 Mar 2014 01:40:32 +0000 (07:10 +0530)]
scsi: check req pointer before dereferencing it
Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
James Hogan [Tue, 25 Mar 2014 21:47:28 +0000 (21:47 +0000)]
linux-user: Correct DLINFO_ITEMS
Commit
a07c67dfccb1 (Implement AT_CLKTCK.) back in March 2008 added a
new auxvec entry but didn't increment DLINFO_ITEMS, so it's been out of
sync ever since.
Bump it up to 14 so that it matches the number of NEW_AUX_ENT's that
need to be counted in create_elf_tables().
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Paul Brook <paul@codesourcery.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Amos Kong [Wed, 26 Mar 2014 00:19:43 +0000 (08:19 +0800)]
virtio-net: add vlan receive state to RxFilterInfo
Stefan Fritsch just fixed a virtio-net driver bug [1], virtio-net won't
filter out VLAN-tagged packets if VIRTIO_NET_F_CTRL_VLAN isn't negotiated.
This patch added a new field to @RxFilterInfo to indicate vlan receive
state ('normal', 'none', 'all'). If VIRTIO_NET_F_CTRL_VLAN isn't
negotiated, vlan receive state will be 'all', then all VLAN-tagged packets
will be received by guest.
This patch also fixed a boundary issue in visiting vlan table.
[1] http://lists.nongnu.org/archive/html/qemu-devel/2014-02/msg02604.html
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Stefan Fritsch [Wed, 26 Mar 2014 10:29:52 +0000 (18:29 +0800)]
virtio-net: Do not filter VLANs without F_CTRL_VLAN
If VIRTIO_NET_F_CTRL_VLAN is not negotiated, do not filter out all
VLAN-tagged packets but send them to the guest.
This fixes VLANs with OpenBSD guests (and probably NetBSD, too, because
the OpenBSD driver started as a port from NetBSD).
Signed-off-by: Stefan Fritsch <sf@sfritsch.de>
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>