OSDN Git Service

uclinux-h8/linux.git
5 years agodrm/i915: Move GEM domain management to its own file
Chris Wilson [Tue, 28 May 2019 09:29:48 +0000 (10:29 +0100)]
drm/i915: Move GEM domain management to its own file

Continuing the decluttering of i915_gem.c, that of the read/write
domains, perhaps the biggest of GEM's follies?

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528092956.14910-7-chris@chris-wilson.co.uk
5 years agodrm/i915: Move mmap and friends to its own file
Chris Wilson [Tue, 28 May 2019 09:29:47 +0000 (10:29 +0100)]
drm/i915: Move mmap and friends to its own file

Continuing the decluttering of i915_gem.c, now the turn of do_mmap and
the faulthandlers

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528092956.14910-6-chris@chris-wilson.co.uk
5 years agodrm/i915: Move phys objects to its own file
Chris Wilson [Tue, 28 May 2019 09:29:46 +0000 (10:29 +0100)]
drm/i915: Move phys objects to its own file

Continuing the decluttering of i915_gem.c, this time the legacy physical
object.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528092956.14910-5-chris@chris-wilson.co.uk
5 years agodrm/i915: Move shmem object setup to its own file
Chris Wilson [Tue, 28 May 2019 09:29:45 +0000 (10:29 +0100)]
drm/i915: Move shmem object setup to its own file

Split the plain old shmem object into its own file to start decluttering
i915_gem.c

v2: Lose the confusing, hysterical raisins, suffix of _gtt.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528092956.14910-4-chris@chris-wilson.co.uk
5 years agodrm/i915: Move object->pages API to i915_gem_object.[ch]
Chris Wilson [Tue, 28 May 2019 09:29:44 +0000 (10:29 +0100)]
drm/i915: Move object->pages API to i915_gem_object.[ch]

Currently the code for manipulating the pages on an object is still
residing in i915_gem.c, move it to i915_gem_object.c

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528092956.14910-3-chris@chris-wilson.co.uk
5 years agodrm/i915: Pull GEM ioctls interface to its own file
Chris Wilson [Tue, 28 May 2019 09:29:43 +0000 (10:29 +0100)]
drm/i915: Pull GEM ioctls interface to its own file

Declutter i915_drv/gem.h by moving the ioctl API into its own header.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528092956.14910-2-chris@chris-wilson.co.uk
5 years agodrm/i915: Split GEM object type definition to its own header
Chris Wilson [Tue, 28 May 2019 09:29:42 +0000 (10:29 +0100)]
drm/i915: Split GEM object type definition to its own header

For convenience in avoiding inline spaghetti, keep the type definition
as a separate header.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528092956.14910-1-chris@chris-wilson.co.uk
5 years agodrm/i915: Kill the undead intel_context.c zombie
Chris Wilson [Tue, 28 May 2019 09:00:01 +0000 (10:00 +0100)]
drm/i915: Kill the undead intel_context.c zombie

It was moved over to gt/ but the backmerge brought it back from the dead.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528090001.17248-1-chris@chris-wilson.co.uk
5 years agodrm/i915: Attach HDR metadata property to connector
Uma Shankar [Fri, 17 May 2019 16:19:09 +0000 (21:49 +0530)]
drm/i915: Attach HDR metadata property to connector

Attach HDR metadata property to connector object.

v2: Rebase

v3: Updated the property name as per updated name
while creating hdr metadata property

v4: Added platform check as suggested by Ville.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1558109949-3309-1-git-send-email-uma.shankar@intel.com
5 years agodrm/i915: Add state readout for DRM infoframe
Uma Shankar [Thu, 16 May 2019 14:10:17 +0000 (19:40 +0530)]
drm/i915: Add state readout for DRM infoframe

Added state readout for DRM infoframe and enabled
state validation for DRM infoframe.

v2: Addressed Ville's review comments and dropped the
unused drm infoframe read at intel_hdmi_init.

v3: Removed a redundant platform check as per Ville's
comment.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1558015817-12025-13-git-send-email-uma.shankar@intel.com
5 years agodrm/i915: Write HDR infoframe and send to panel
Uma Shankar [Sat, 18 May 2019 10:39:27 +0000 (16:09 +0530)]
drm/i915: Write HDR infoframe and send to panel

Enable writing of HDR metadata infoframe to panel.
The data will be provid by usersapace compositors, based
on blending policies and passsed to driver through a blob
property.

v2: Rebase

v3: Fixed a warning message

v4: Addressed Shashank's review comments

v5: Rebase. Added infoframe calculation in compute config.

v6: Addressed Shashank's review comment. Added HDR metadata
support from GEN10 onwards as per Shashank's recommendation.

v7: Addressed Shashank's review comments

v8: Added Shashank's RB.

v9: Addressed Ville's review comments.

v10: Removed a redundant check as core already handles it, as per
Ville's comment.

v11: Added the metadata available check to avoid failure in
compute_config.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1558175967-22068-1-git-send-email-uma.shankar@intel.com
5 years agodrm/i915: Enable infoframes on GLK+ for HDR
Ville Syrjälä [Fri, 17 May 2019 16:22:25 +0000 (21:52 +0530)]
drm/i915: Enable infoframes on GLK+ for HDR

This patch enables infoframes on GLK+ to be
used to send HDR metadata to HDMI sink.

v2: Addressed Shashank's review comment.

v3: Addressed Shashank's review comment.

v4: Added Shashank's RB.

v5: Dropped hdr_metadata_change check while modeset, as per
Ville's suggestion.

v6: Removed an unused and duplicate bit defintion, as per Ville's
comment.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
[mlankhorst: Reorder patch series]
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1558110145-3422-1-git-send-email-uma.shankar@intel.com
5 years agodrm/i915: Add DRM Infoframe handling for BYT/CHT
Uma Shankar [Thu, 16 May 2019 14:10:15 +0000 (19:40 +0530)]
drm/i915: Add DRM Infoframe handling for BYT/CHT

BYT/CHT doesn't support DRM Infoframe. This caused
a WARN_ON due to a missing CASE while executing
intel_hdmi_infoframes_enabled function. This patch
fixes the same.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1558015817-12025-11-git-send-email-uma.shankar@intel.com
5 years agodrm/i915: Enabled Modeset when HDR Infoframe changes
Uma Shankar [Thu, 16 May 2019 14:10:14 +0000 (19:40 +0530)]
drm/i915: Enabled Modeset when HDR Infoframe changes

This patch enables modeset whenever HDR metadata
needs to be updated to sink.

v2: Addressed Shashank's review comments.

v3: Added Shashank's RB.

v4: Addressed Ville's review comments.

v5: Addressed Ville's review comments.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
[mlankhorst: Fix up commit message, reorder]
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1558015817-12025-10-git-send-email-uma.shankar@intel.com
5 years agodrm/i915/huc: Define HuC firmware version for Icelake
Michal Wajdeczko [Mon, 27 May 2019 18:36:12 +0000 (18:36 +0000)]
drm/i915/huc: Define HuC firmware version for Icelake

Define HuC firmware version for Icelake.

v2: 8.4.3238 is now available

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Reviewed-by: Tony Ye <tony.ye@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-17-michal.wajdeczko@intel.com
5 years agodrm/i915/guc: Define GuC firmware version for Icelake
Michal Wajdeczko [Mon, 27 May 2019 18:36:11 +0000 (18:36 +0000)]
drm/i915/guc: Define GuC firmware version for Icelake

Define GuC firmware version for Icelake.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-16-michal.wajdeczko@intel.com
5 years agodrm/i915/guc: Enable GuC CTB communication on Gen11
Michal Wajdeczko [Mon, 27 May 2019 18:36:10 +0000 (18:36 +0000)]
drm/i915/guc: Enable GuC CTB communication on Gen11

Gen11 GuC firmware expects H2G command messages to be sent over CTB
(command transport buffers).

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: John Spotswood <john.a.spotswood@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-15-michal.wajdeczko@intel.com
5 years agodrm/i915/guc: Update GuC CTB response definition
Michal Wajdeczko [Mon, 27 May 2019 18:36:09 +0000 (18:36 +0000)]
drm/i915/guc: Update GuC CTB response definition

Current GuC firmwares identify response message in a different way.

v2: update comments for other H2G bits (Daniele)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Kelvin Gardiner <kelvin.gardiner@intel.com>
Cc: John Spotswood <john.a.spotswood@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-14-michal.wajdeczko@intel.com
5 years agodrm/i915/guc: Correctly handle GuC interrupts on Gen11
Oscar Mateo [Mon, 27 May 2019 18:36:08 +0000 (18:36 +0000)]
drm/i915/guc: Correctly handle GuC interrupts on Gen11

Starting Gen11 GuC shares interrupt registers with SG unit
instead of PM. But for now we don't care about SG interrupts.

v2: (Chris)
v3: rebased (Michal)
v4: more bspec pages, use macros, update commit msg (Michal Wi)

Bspec: 19820, 19840, 19841, 20176

Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-13-michal.wajdeczko@intel.com
5 years agodrm/i915/guc: Create vfuncs for the GuC interrupts control functions
Oscar Mateo [Mon, 27 May 2019 18:36:07 +0000 (18:36 +0000)]
drm/i915/guc: Create vfuncs for the GuC interrupts control functions

Controlling and handling of the GuC interrupts is Gen specific.
Create virtual functions to avoid redundant runtime Gen checks.
Gen-specific versions of these functions will follow.

v2: move vfuncs to struct guc (Daniele)
v3: rebased

Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-12-michal.wajdeczko@intel.com
5 years agodrm/i915/huc: New HuC status register for Gen11
Michal Wajdeczko [Mon, 27 May 2019 18:36:06 +0000 (18:36 +0000)]
drm/i915/huc: New HuC status register for Gen11

Gen11 defines new register for checking HuC authentication status.
Look into the right register and bit.

v2: use reg/mask/value instead of dedicated functions (Daniele)

BSpec: 19686

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: John Spotswood <john.a.spotswood@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-11-michal.wajdeczko@intel.com
5 years agodrm/i915/guc: New GuC scratch registers for Gen11
Michal Wajdeczko [Mon, 27 May 2019 18:36:05 +0000 (18:36 +0000)]
drm/i915/guc: New GuC scratch registers for Gen11

Gen11 adds new set of scratch registers that can be used for MMIO
based Host-to-Guc communication. Due to limited number of these
registers it is expected that host will use them only for command
transport buffers (CTB) communication setup if one is available.

Bspec: 21044

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-10-michal.wajdeczko@intel.com
5 years agodrm/i915/guc: New GuC interrupt register for Gen11
Michal Wajdeczko [Mon, 27 May 2019 18:36:04 +0000 (18:36 +0000)]
drm/i915/guc: New GuC interrupt register for Gen11

Gen11 defines new more flexible Host-to-GuC interrupt register.
Now the host can write any 32-bit payload to trigger an interrupt
and GuC can additionally read this payload from the register.
Current GuC firmware ignores the payload so we just write 0.

Bspec: 21043

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-9-michal.wajdeczko@intel.com
5 years agodrm/i915/huc: Define HuC firmware version for Geminilake
Michal Wajdeczko [Mon, 27 May 2019 18:36:03 +0000 (18:36 +0000)]
drm/i915/huc: Define HuC firmware version for Geminilake

Define HuC firmware version for Geminilake.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-8-michal.wajdeczko@intel.com
5 years agodrm/i915/guc: Define GuC firmware version for Geminilake
Michal Wajdeczko [Mon, 27 May 2019 18:36:02 +0000 (18:36 +0000)]
drm/i915/guc: Define GuC firmware version for Geminilake

Define GuC firmware version for Geminilake.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-7-michal.wajdeczko@intel.com
5 years agodrm/i915/guc: Always ask GuC to update power domain states
Michal Wajdeczko [Mon, 27 May 2019 18:36:01 +0000 (18:36 +0000)]
drm/i915/guc: Always ask GuC to update power domain states

With newer GuC firmware it is always ok to ask GuC to update power
domain states. Make it an unconditional initialization step.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Spotswood <john.a.spotswood@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: John Spotswood <john.a.spotswood@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-6-michal.wajdeczko@intel.com
5 years agodrm/i915/guc: Reset GuC ADS during sanitize
Michal Wajdeczko [Mon, 27 May 2019 18:36:00 +0000 (18:36 +0000)]
drm/i915/guc: Reset GuC ADS during sanitize

GuC stores some data in there, which might be stale after a reset.
Reinitialize whole ADS in case any part of it was corrupted during
previous GuC run.

v2: s/reinit/init, update functions descriptions (Tomek/Michal)
v3: reset ADS right before fw upload

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: MichaĹ Winiarski <michal.winiarski@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com> #v2
Reviewed-by: MichaĹ Winiarski <michal.winiarski@intel.com> #v2
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-5-michal.wajdeczko@intel.com
5 years agodrm/i915/guc: Updates for GuC 32.0.3 firmware
Michal Wajdeczko [Mon, 27 May 2019 18:35:59 +0000 (18:35 +0000)]
drm/i915/guc: Updates for GuC 32.0.3 firmware

New GuC 32.0.3 firmware made many changes around its ABI that
require driver updates:

* FW release version numbering schema now includes patch number
* FW release version encoding in CSS header
* Boot parameters
* Suspend/resume protocol
* Sample-forcewake command
* Additional Data Structures (ADS)

This commit is a squash of patches 3-8 from series [1].
[1] https://patchwork.freedesktop.org/series/58760/

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Jeff Mcgee <jeff.mcgee@intel.com>
Cc: John Spotswood <john.a.spotswood@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # numbering schema
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ccs heaser
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # boot params
Acked-by: John Spotswood <john.a.spotswood@intel.com> # suspend/resume
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # sample-forcewake
Acked-by: John Spotswood <john.a.spotswood@intel.com> # sample-forcewake
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ADS
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-4-michal.wajdeczko@intel.com
5 years agodrm/i915/guc: Don't allow GuC submission
Michal Wajdeczko [Mon, 27 May 2019 18:35:58 +0000 (18:35 +0000)]
drm/i915/guc: Don't allow GuC submission

Due to the upcoming changes to the GuC ABI interface, we must
disable GuC submission mode until final ABI will be available
on all GuC firmwares.

To avoid regressions on systems configured to run with no longer
supported configuration "enable_guc=3" or "enable_guc=1" clear
GuC submission bit.

v2: force switch to non-GuC submission mode
v3: use GEM_BUG_ON (Joonas)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Spotswood <john.a.spotswood@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Jeff Mcgee <jeff.mcgee@intel.com>
Cc: Antonio Argenziano <antonio.argenziano@intel.com>
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Cc: Martin Peres <martin.peres@linux.intel.com>
Acked-by: Martin Peres <martin.peres@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-3-michal.wajdeczko@intel.com
5 years agodrm/i915/guc: Change platform default GuC mode
Michal Wajdeczko [Mon, 27 May 2019 18:35:57 +0000 (18:35 +0000)]
drm/i915/guc: Change platform default GuC mode

Today our most desired GuC configuration is to only enable HuC
if it is available (as we need authenticated HuC firmware to enable
all media codecs on the hardware) and we really don't care about
having GuC submission enabled.

Change platform default GuC mode to match our goal, but note that
we still don't change default modparam value (GuC/HuC disabled).

v2: add why HuC is so important (Joonas)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Spotswood <john.a.spotswood@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Jeff Mcgee <jeff.mcgee@intel.com>
Cc: Antonio Argenziano <antonio.argenziano@intel.com>
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Acked-by: Tony Ye <tony.ye@intel.com>
Reviewed-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-2-michal.wajdeczko@intel.com
5 years agoMerge drm/drm-next into drm-intel-next-queued
Jani Nikula [Tue, 28 May 2019 08:07:59 +0000 (11:07 +0300)]
Merge drm/drm-next into drm-intel-next-queued

Get the HDR dependencies originally merged via drm-misc. Sync up all
i915 changes applied via other trees. And get v5.2-rc2 as the baseline.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
5 years agodrm/i915: Keep user GGTT alive for a minimum of 250ms
Chris Wilson [Mon, 27 May 2019 11:51:14 +0000 (12:51 +0100)]
drm/i915: Keep user GGTT alive for a minimum of 250ms

Do not allow runtime pm autosuspend to remove userspace GGTT mmaps too
quickly. For example, igt sets the autosuspend delay to 0, and so we
immediately attempt to perform runtime suspend upon releasing the
wakeref. Unfortunately, that involves tearing down GGTT mmaps as they
require an active device.

Override the autosuspend for GGTT mmaps, by keeping the wakeref around
for 250ms after populating the PTE for a fresh mmap.

v2: Prefer refcount_t for its under/overflow error detection
v3: Flush the user runtime autosuspend prior to system system.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527115114.13448-1-chris@chris-wilson.co.uk
5 years agoMerge tag 'drm-intel-next-2019-05-24' of git://anongit.freedesktop.org/drm/drm-intel...
Dave Airlie [Mon, 27 May 2019 23:03:58 +0000 (09:03 +1000)]
Merge tag 'drm-intel-next-2019-05-24' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Features:
- Engine discovery query (Tvrtko)
- Support for DP YCbCr4:2:0 outputs (Gwan-gyeong)
- HDCP revocation support, refactoring (Ramalingam)
- Remove DRM_AUTH from IOCTLs which also have DRM_RENDER_ALLOW (Christian König)
- Asynchronous display power disabling (Imre)
- Perma-pin uC firmware and re-enable global reset (Fernando)
- GTT remapping for display, for bigger fb size and stride (Ville)
- Enable pipe HDR mode on ICL if only HDR planes are used (Ville)
- Kconfig to tweak the busyspin durations for i915_wait_request (Chris)
- Allow multiple user handles to the same VM (Chris)
- GT/GEM runtime pm improvements using wakerefs (Chris)
- Gen 4&5 render context support (Chris)
- Allow userspace to clone contexts on creation (Chris)
- SINGLE_TIMELINE flags for context creation (Chris)
- Allow specification of parallel execbuf (Chris)

Refactoring:
- Header refactoring (Jani)
- Move GraphicsTechnology files under gt/ (Chris)
- Sideband code refactoring (Chris)

Fixes:
- ICL DSI state readout and checker fixes (Vandita)
- GLK DSI picture corruption fix (Stanislav)
- HDMI deep color fixes (Clinton, Aditya)
- Fix driver unbinding from a device in use (Janusz)
- Fix clock gating with pipe scaling (Radhakrishna)
- Disable broken FBC on GLK (Daniel Drake)
- Miscellaneous GuC fixes (Michal)
- Fix MG PHY DP register programming (Imre)
- Add missing combo PHY lane power setup (Imre)
- Workarounds for early ICL VBT issues (Imre)
- Fix fastset vs. pfit on/off on HSW EDP transcoder (Ville)
- Add readout and state check for pch_pfit.force_thru (Ville)
- Miscellaneous display fixes and refactoring (Ville)
- Display workaround fixes (Ville)
- Enable audio even if ELD is bogus (Ville)
- Fix use-after-free in reporting create.size (Chris)
- Sideband fixes to avoid BYT hard lockups (Chris)
- Workaround fixes and improvements (Chris)

Maintainer shortcomings:
- Failure to adequately describe and give credit for all changes (Jani)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87sgt3n45z.fsf@intel.com
5 years agoMerge tag 'drm-misc-next-2019-05-24' of git://anongit.freedesktop.org/drm/drm-misc...
Dave Airlie [Mon, 27 May 2019 22:25:46 +0000 (08:25 +1000)]
Merge tag 'drm-misc-next-2019-05-24' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.3, try #2:

UAPI Changes:
- Add HDR source metadata property.
- Make drm.h compile on GNU/kFreeBSD by including stdint.h
- Clarify how the userspace reviewer has to review new kernel UAPI.
- Clarify that for using new UAPI, merging to drm-next or drm-misc-next should be enough.

Cross-subsystem Changes:
- video/hdmi: Add unpack function for DRM infoframes.
- Device tree bindings:
  * Updating a property for Mali Midgard GPUs
  * Updating a property for STM32 DSI panel
  * Adding support for FriendlyELEC HD702E 800x1280 panel
  * Adding support for Evervision VGG804821 800x480 5.0" WVGA TFT panel
  * Adding support for the EDT ET035012DM6 3.5" 320x240 QVGA 24-bit RGB TFT.
  * Adding support for Three Five displays TFC S9700RTWV43TR-01B 800x480 panel
    with resistive touch found on TI's AM335X-EVM.
  * Adding support for EDT ETM0430G0DH6 480x272 panel.
- Add OSD101T2587-53TS driver with DT bindings.
- Add Samsung S6E63M0 panel driver with DT bindings.
- Add VXT VL050-8048NT-C01 800x480 panel with DT bindings.
- Dma-buf:
  - Make mmap callback actually optional.
  - Documentation updates.
  - Fix debugfs refcount inbalance.
  - Remove unused sync_dump function.
- Fix device tree bindings in drm-misc-next after a botched merge.

Core Changes:
- Add support for HDR infoframes and related EDID parsing.
- Remove prime sg_table caching, now done inside dma-buf.
- Add shiny new drm_gem_vram helpers for simple VRAM drivers;
  with some fixes to the new API on top.
- Small fix to job cleanup without timeout handler.
- Documentation fixes to drm_fourcc.
- Replace lookups of drm_format with struct drm_format_info;
  remove functions that become obsolete by this conversion.
- Remove double include in bridge/panel.c and some drivers.
- Remove drmP.h include from drm/edid and drm/dp.
- Fix null pointer deref in drm_fb_helper_hotplug_event().
- Remove most members from drm_fb_helper_crtc, only mode_set is kept.
- Remove race of fb helpers with userspace; only restore mode
  when userspace is not master.
- Move legacy setup from drm_file.c to drm_legacy_misc.c
- Rework scheduler job destruction.
- drm/bus was removed, remove from TODO.
- Add __drm_atomic_helper_crtc_reset() to subclass crtc_state,
  and convert some drivers to use it (conversion is not complete yet).
- Bump vblank timeout wait to 100 ms for atomic.
- Docbook fix for drm_hdmi_infoframe_set_hdr_metadata.

Driver Changes:
- sun4i: Use DRM_GEM_CMA_VMAP_DRIVER_OPS instead of definining manually.
- v3d: Small cleanups, adding support for compute shaders,
       reservation/synchronization fixes and job management refactoring,
       fixes MMU and debugfs.
- lima: Fix null pointer in irq handler on startup, set default timeout for scheduled jobs.
- stm/ltdc: Assorted fixes and adding FB modifier support.
- amdgpu: Avoid hw reset if guilty job was already signaled.
- virtio: Add seqno to fences, add trace events, use correct flags for fence allocation.
- Convert AST, bochs, mgag200, vboxvideo, hisilicon to the new drm_gem_vram API.
- sun6i_mipi_dsi: Support DSI GENERIC_SHORT_WRITE_2 transfers.
- bochs: Small fix to use PTR_RET_OR_ZERO and driver unload.
- gma500: header fixes
- cirrus: Remove unused files.
- mediatek: Fix compiler warning after merging the HDR series.
- vc4: Rework binner bo handling.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/052875a5-27ba-3832-60c2-193d950afdff@linux.intel.com
5 years agodrm/i915: Make sure we have enough memory bandwidth on ICL
Ville Syrjälä [Fri, 24 May 2019 15:36:14 +0000 (18:36 +0300)]
drm/i915: Make sure we have enough memory bandwidth on ICL

ICL has so many planes that it can easily exceed the maximum
effective memory bandwidth of the system. We must therefore check
that we don't exceed that limit.

The algorithm is very magic number heavy and lacks sufficient
explanation for now. We also have no sane way to query the
memory clock and timings, so we must rely on a combination of
raw readout from the memory controller and hardcoded assumptions.
The memory controller values obviously change as the system
jumps between the different SAGV points, so we try to stabilize
it first by disabling SAGV for the duration of the readout.

The utilized bandwidth is tracked via a device wide atomic
private object. That is actually not robust because we can't
afford to enforce strict global ordering between the pipes.
Thus I think I'll need to change this to simply chop up the
available bandwidth between all the active pipes. Each pipe
can then do whatever it wants as long as it doesn't exceed
its budget. That scheme will also require that we assume that
any number of planes could be active at any time.

TODO: make it robust and deal with all the open questions

v2: Sleep longer after disabling SAGV
v3: Poll for the dclk to get raised (seen it take 250ms!)
    If the system has 2133MT/s memory then we pointlessly
    wait one full second :(
v4: Use the new pcode interface to get the qgv points rather
    that using hardcoded numbers
v5: Move the pcode stuff into intel_bw.c (Matt)
    s/intel_sagv_info/intel_qgv_info/
    Do the NV12/P010 as per spec for now (Matt)
    s/IS_ICELAKE/IS_GEN11/
v6: Ignore bandwidth limits if the pcode query fails

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524153614.32410-1-ville.syrjala@linux.intel.com
5 years agodrm/i915: Make sandybridge_pcode_read() deal with the second data register
Ville Syrjälä [Tue, 21 May 2019 16:40:24 +0000 (19:40 +0300)]
drm/i915: Make sandybridge_pcode_read() deal with the second data register

The pcode mailbox has two data registers. So far we've only ever used
the one, but that's about to change. Expose the second data register to
the callers of sandybridge_pcode_read().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521164025.30225-1-ville.syrjala@linux.intel.com
5 years agodrm/i915/icl: Fix AUX-B HW not done issue w/o AUX-A
Imre Deak [Fri, 24 May 2019 17:35:32 +0000 (20:35 +0300)]
drm/i915/icl: Fix AUX-B HW not done issue w/o AUX-A

Atm AUX-B transfers can fail with the following error if AUX-A is not
enabled:

[  594.594108] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7c2003ff
[  594.615854] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp aux hw did not signal timeout!
[  594.632851] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp aux hw did not signal timeout!
[  594.632915] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp_aux_ch not done status 0xac2003ff
[  594.641786] ------------[ cut here ]------------
[  594.641790] dp_aux_ch not started status 0xac2003ff
[  594.641874] WARNING: CPU: 4 PID: 1366 at drivers/gpu/drm/i915/intel_dp.c:1268 intel_dp_aux_xfer+0x232/0x890 [i915]

Ville noticed this issue already earlier and managed to work around it
by keeping AUX-A always powered whenever AUX-B was used. He also
reported the issue to HW folks and they have now root caused the problem
and updated BSpec with a fix (see internal BSpec/Index/21257,
HSD/1607152412).

I noticed the same error - even with the WA being applied - while doing
AUX transfers with Chamelium being connected with a DP cable to the
source but letting Chamelium imitate an unplug. This is probably some
unstandard way on Chamelium's behalf of disconnecting itself from the
AUX pins. For instance it could still pull on the AUX pins which would
prevent the source from detecting AUX timeouts in the proper way,
leading to the ERRORs or WARNs seen in the logs in the Reference: bug
below.

In case I disconnect the sink properly (the cable itself, not via the
Chamelium unplug xmlrpc command) then the AUX timeout signaling works
properly and so there won't be any ERRORs/WARNs emitted.

Reference: https://bugs.freedesktop.org/show_bug.cgi?id=110718
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524173532.6444-1-imre.deak@intel.com
5 years agodrm/i915: make REG_BIT() and REG_GENMASK() work with variables
Jani Nikula [Fri, 24 May 2019 18:52:53 +0000 (21:52 +0300)]
drm/i915: make REG_BIT() and REG_GENMASK() work with variables

REG_BIT() and REG_GENMASK() were intended to work with both constant
expressions and otherwise, with the former having extra compile time
checks for the bit ranges. Incredibly, the result of
__builtin_constant_p() is not an integer constant expression when given
a non-constant expression, leading to errors in BUILD_BUG_ON_ZERO().

Replace __builtin_constant_p() with the __is_constexpr() magic spell.

Reported-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524185253.1088-1-jani.nikula@intel.com
5 years agodrm/i915/gtt: set err to -ENOMEM on memory allocation failure
Colin Ian King [Fri, 24 May 2019 21:26:27 +0000 (22:26 +0100)]
drm/i915/gtt: set err to -ENOMEM on memory allocation failure

Currently when the allocation of ppgtt->work fails the error return
path via err_free returns an uninitialized value in err. Fix this
by setting err to the appropriate error return of -ENOMEM.

Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: d3622099c76f ("drm/i915/gtt: Always acquire struct_mutex for gen6_ppgtt_cleanup")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524212627.24256-1-colin.king@canonical.com
5 years agodrm/i915/dsi: Call drm_connector_cleanup on vlv_dsi_init error exit path
Hans de Goede [Fri, 24 May 2019 16:35:18 +0000 (18:35 +0200)]
drm/i915/dsi: Call drm_connector_cleanup on vlv_dsi_init error exit path

If we exit vlv_dsi_init() because we failed to find a fixed_mode, then
we've already called drm_connector_init() and we should call
drm_connector_cleanup() to unregister the connector object.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524163518.17545-1-hdegoede@redhat.com
5 years agoLinux 5.2-rc2 v5.2-rc2
Linus Torvalds [Sun, 26 May 2019 23:49:19 +0000 (16:49 -0700)]
Linux 5.2-rc2

5 years agoMerge tag 'trace-v5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt...
Linus Torvalds [Sun, 26 May 2019 20:49:40 +0000 (13:49 -0700)]
Merge tag 'trace-v5.2-rc1-2' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing warning fix from Steven Rostedt:
 "Make the GCC 9 warning for sub struct memset go away.

  GCC 9 now warns about calling memset() on partial structures when it
  goes across multiple fields. This adds a helper for the place in
  tracing that does this type of clearing of a structure"

* tag 'trace-v5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Silence GCC 9 array bounds warning

5 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Sun, 26 May 2019 20:45:15 +0000 (13:45 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull KVM fixes from Paolo Bonzini:
 "The usual smattering of fixes and tunings that came in too late for
  the merge window, but should not wait four months before they appear
  in a release.

  I also travelled a bit more than usual in the first part of May, which
  didn't help with picking up patches and reports promptly"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (33 commits)
  KVM: x86: fix return value for reserved EFER
  tools/kvm_stat: fix fields filter for child events
  KVM: selftests: Wrap vcpu_nested_state_get/set functions with x86 guard
  kvm: selftests: aarch64: compile with warnings on
  kvm: selftests: aarch64: fix default vm mode
  kvm: selftests: aarch64: dirty_log_test: fix unaligned memslot size
  KVM: s390: fix memory slot handling for KVM_SET_USER_MEMORY_REGION
  KVM: x86/pmu: do not mask the value that is written to fixed PMUs
  KVM: x86/pmu: mask the result of rdpmc according to the width of the counters
  x86/kvm/pmu: Set AMD's virt PMU version to 1
  KVM: x86: do not spam dmesg with VMCS/VMCB dumps
  kvm: Check irqchip mode before assign irqfd
  kvm: svm/avic: fix off-by-one in checking host APIC ID
  KVM: selftests: do not blindly clobber registers in guest asm
  KVM: selftests: Remove duplicated TEST_ASSERT in hyperv_cpuid.c
  KVM: LAPIC: Expose per-vCPU timer_advance_ns to userspace
  KVM: LAPIC: Fix lapic_timer_advance_ns parameter overflow
  kvm: vmx: Fix -Wmissing-prototypes warnings
  KVM: nVMX: Fix using __this_cpu_read() in preemptible context
  kvm: fix compilation on s390
  ...

5 years agoMerge tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 26 May 2019 15:30:16 +0000 (08:30 -0700)]
Merge tag 'random_for_linus_stable' of git://git./linux/kernel/git/tytso/random

Pull /dev/random fix from Ted Ts'o:
 "Fix a soft lockup regression when reading from /dev/random in early
  boot"

* tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  random: fix soft lockup when trying to read from an uninitialized blocking pool

5 years agorandom: fix soft lockup when trying to read from an uninitialized blocking pool
Theodore Ts'o [Wed, 22 May 2019 16:02:16 +0000 (12:02 -0400)]
random: fix soft lockup when trying to read from an uninitialized blocking pool

Fixes: eb9d1bf079bb: "random: only read from /dev/random after its pool has received 128 bits"
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
5 years agotracing: Silence GCC 9 array bounds warning
Miguel Ojeda [Thu, 23 May 2019 12:45:35 +0000 (14:45 +0200)]
tracing: Silence GCC 9 array bounds warning

Starting with GCC 9, -Warray-bounds detects cases when memset is called
starting on a member of a struct but the size to be cleared ends up
writing over further members.

Such a call happens in the trace code to clear, at once, all members
after and including `seq` on struct trace_iterator:

    In function 'memset',
        inlined from 'ftrace_dump' at kernel/trace/trace.c:8914:3:
    ./include/linux/string.h:344:9: warning: '__builtin_memset' offset
    [8505, 8560] from the object at 'iter' is out of the bounds of
    referenced subobject 'seq' with type 'struct trace_seq' at offset
    4368 [-Warray-bounds]
      344 |  return __builtin_memset(p, c, size);
          |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~

In order to avoid GCC complaining about it, we compute the address
ourselves by adding the offsetof distance instead of referring
directly to the member.

Since there are two places doing this clear (trace.c and trace_kdb.c),
take the chance to move the workaround into a single place in
the internal header.

Link: http://lkml.kernel.org/r/20190523124535.GA12931@gmail.com
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
[ Removed unnecessary parenthesis around "iter" ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
5 years agoMerge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 25 May 2019 22:03:12 +0000 (15:03 -0700)]
Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "Bug fixes (including a regression fix) for ext4"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix dcache lookup of !casefolded directories
  ext4: do not delete unlinked inode from orphan list on failed truncate
  ext4: wait for outstanding dio during truncate in nojournal mode
  ext4: don't perform block validity checks on the journal inode

5 years agoMerge tag 'libnvdimm-fixes-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 25 May 2019 17:11:23 +0000 (10:11 -0700)]
Merge tag 'libnvdimm-fixes-5.2-rc2' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm fixes from Dan Williams:

 - Fix a regression that disabled device-mapper dax support

 - Remove unnecessary hardened-user-copy overhead (>30%) for dax
   read(2)/write(2).

 - Fix some compilation warnings.

* tag 'libnvdimm-fixes-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  libnvdimm/pmem: Bypass CONFIG_HARDENED_USERCOPY overhead
  dax: Arrange for dax_supported check to span multiple devices
  libnvdimm: Fix compilation warnings with W=1

5 years agoMerge tag 'trace-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt...
Linus Torvalds [Sat, 25 May 2019 17:08:14 +0000 (10:08 -0700)]
Merge tag 'trace-v5.2-rc1' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "Tom Zanussi sent me some small fixes and cleanups to the histogram
  code and I forgot to incorporate them.

  I also added a small clean up patch that was sent to me a while ago
  and I just noticed it"

* tag 'trace-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  kernel/trace/trace.h: Remove duplicate header of trace_seq.h
  tracing: Add a check_val() check before updating cond_snapshot() track_val
  tracing: Check keys for variable references in expressions too
  tracing: Prevent hist_field_var_ref() from accessing NULL tracing_map_elts

5 years agoext4: fix dcache lookup of !casefolded directories
Gabriel Krisman Bertazi [Sat, 25 May 2019 03:48:23 +0000 (23:48 -0400)]
ext4: fix dcache lookup of !casefolded directories

Found by visual inspection, this wasn't caught by my xfstest, since it's
effect is ignoring positive dentries in the cache the fallback just goes
to the disk.  it was introduced in the last iteration of the
case-insensitive patch.

d_compare should return 0 when the entries match, so make sure we are
correctly comparing the entire string if the encoding feature is set and
we are on a case-INsensitive directory.

Fixes: b886ee3e778e ("ext4: Support case-insensitive file name lookups")
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
5 years agoMerge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Linus Torvalds [Sat, 25 May 2019 00:30:28 +0000 (17:30 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "This is the same set of patches sent in the merge window as the final
  pull except that Martin's read only rework is replaced with a simple
  revert of the original change that caused the regression.

  Everything else is an obvious fix or small cleanup"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  Revert "scsi: sd: Keep disk read-only when re-reading partition"
  scsi: bnx2fc: fix incorrect cast to u64 on shift operation
  scsi: smartpqi: Reporting unhandled SCSI errors
  scsi: myrs: Fix uninitialized variable
  scsi: lpfc: Update lpfc version to 12.2.0.2
  scsi: lpfc: add check for loss of ndlp when sending RRQ
  scsi: lpfc: correct rcu unlock issue in lpfc_nvme_info_show
  scsi: lpfc: resolve lockdep warnings
  scsi: qedi: remove set but not used variables 'cdev' and 'udev'
  scsi: qedi: remove memset/memcpy to nfunc and use func instead
  scsi: qla2xxx: Add cleanup for PCI EEH recovery

5 years agoMerge tag 'for-linus-20190524' of git://git.kernel.dk/linux-block
Linus Torvalds [Fri, 24 May 2019 23:02:14 +0000 (16:02 -0700)]
Merge tag 'for-linus-20190524' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

 - NVMe pull request from Keith, with fixes from a few folks.

 - bio and sbitmap before atomic barrier fixes (Andrea)

 - Hang fix for blk-mq freeze and unfreeze (Bob)

 - Single segment count regression fix (Christoph)

 - AoE now has a new maintainer

 - tools/io_uring/ Makefile fix, and sync with liburing (me)

* tag 'for-linus-20190524' of git://git.kernel.dk/linux-block: (23 commits)
  tools/io_uring: sync with liburing
  tools/io_uring: fix Makefile for pthread library link
  blk-mq: fix hang caused by freeze/unfreeze sequence
  block: remove the bi_seg_{front,back}_size fields in struct bio
  block: remove the segment size check in bio_will_gap
  block: force an unlimited segment size on queues with a virt boundary
  block: don't decrement nr_phys_segments for physically contigous segments
  sbitmap: fix improper use of smp_mb__before_atomic()
  bio: fix improper use of smp_mb__before_atomic()
  aoe: list new maintainer for aoe driver
  nvme-pci: use blk-mq mapping for unmanaged irqs
  nvme: update MAINTAINERS
  nvme: copy MTFA field from identify controller
  nvme: fix memory leak for power latency tolerance
  nvme: release namespace SRCU protection before performing controller ioctls
  nvme: merge nvme_ns_ioctl into nvme_ioctl
  nvme: remove the ifdef around nvme_nvm_ioctl
  nvme: fix srcu locking on error return in nvme_get_ns_from_disk
  nvme: Fix known effects
  nvme-pci: Sync queues on reset
  ...

5 years agoMerge tag 'linux-kselftest-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 24 May 2019 22:21:05 +0000 (15:21 -0700)]
Merge tag 'linux-kselftest-5.2-rc2' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fixes from Shuah Khan:

 - Two fixes to regressions introduced in kselftest Makefile test run
   output refactoring work (Kees Cook)

 - Adding Atom support to syscall_arg_fault test (Tong Bo)

* tag 'linux-kselftest-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/timers: Add missing fflush(stdout) calls
  selftests: Remove forced unbuffering for test running
  selftests/x86: Support Atom for syscall_arg_fault test

5 years agoMerge tag 'devicetree-fixes-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 24 May 2019 22:16:46 +0000 (15:16 -0700)]
Merge tag 'devicetree-fixes-for-5.2' of git://git./linux/kernel/git/robh/linux

Pull Devicetree fixes from Rob Herring:

 - Update checkpatch.pl to use DT vendor-prefixes.yaml

 - Fix DT binding references to files converted to DT schema

 - Clean-up Arm CPU binding examples to match schema

 - Add Sifive block versioning scheme documentation

 - Pass binding directory base to validation tools for reference lookups

* tag 'devicetree-fixes-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  checkpatch.pl: Update DT vendor prefix check
  dt: bindings: mtd: replace references to nand.txt with nand-controller.yaml
  dt-bindings: interrupt-controller: arm,gic: Fix schema errors in example
  dt-bindings: arm: Clean up CPU binding examples
  dt: fix refs that were renamed to json with the same file name
  dt-bindings: Pass binding directory to validation tools
  dt-bindings: sifive: describe sifive-blocks versioning

5 years agoMerge tag 'spdx-5.2-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Fri, 24 May 2019 21:31:58 +0000 (14:31 -0700)]
Merge tag 'spdx-5.2-rc2-2' of git://git./linux/kernel/git/gregkh/driver-core

Pule more SPDX updates from Greg KH:
 "Here is another set of reviewed patches that adds SPDX tags to
  different kernel files, based on a set of rules that are being used to
  parse the comments to try to determine that the license of the file is
  "GPL-2.0-or-later".

  Only the "obvious" versions of these matches are included here, a
  number of "non-obvious" variants of text have been found but those
  have been postponed for later review and analysis.

  These patches have been out for review on the linux-spdx@vger mailing
  list, and while they were created by automatic tools, they were
  hand-verified by a bunch of different people, all whom names are on
  the patches are reviewers"

* tag 'spdx-5.2-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (85 commits)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 125
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 123
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 122
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 121
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 120
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 119
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 118
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 116
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 114
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 113
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 112
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 111
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 110
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 106
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 105
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 104
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 103
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 102
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 101
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 98
  ...

5 years agolocking/lock_events: Use this_cpu_add() when necessary
Waiman Long [Fri, 24 May 2019 19:42:22 +0000 (15:42 -0400)]
locking/lock_events: Use this_cpu_add() when necessary

The kernel test robot has reported that the use of __this_cpu_add()
causes bug messages like:

  BUG: using __this_cpu_add() in preemptible [00000000] code: ...

Given the imprecise nature of the count and the possibility of resetting
the count and doing the measurement again, this is not really a big
problem to use the unprotected __this_cpu_*() functions.

To make the preemption checking code happy, the this_cpu_*() functions
will be used if CONFIG_DEBUG_PREEMPT is defined.

The imprecise nature of the locking counts are also documented with
the suggestion that we should run the measurement a few times with the
counts reset in between to get a better picture of what is going on
under the hood.

Fixes: a8654596f0371 ("locking/rwsem: Enable lock event counting")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agoKVM: x86: fix return value for reserved EFER
Paolo Bonzini [Fri, 24 May 2019 19:52:46 +0000 (21:52 +0200)]
KVM: x86: fix return value for reserved EFER

Commit 11988499e62b ("KVM: x86: Skip EFER vs. guest CPUID checks for
host-initiated writes", 2019-04-02) introduced a "return false" in a
function returning int, and anyway set_efer has a "nonzero on error"
conventon so it should be returning 1.

Reported-by: Pavel Machek <pavel@denx.de>
Fixes: 11988499e62b ("KVM: x86: Skip EFER vs. guest CPUID checks for host-initiated writes")
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agotools/kvm_stat: fix fields filter for child events
Stefan Raspl [Sun, 21 Apr 2019 13:26:24 +0000 (15:26 +0200)]
tools/kvm_stat: fix fields filter for child events

The fields filter would not work with child fields, as the respective
parents would not be included. No parents displayed == no childs displayed.
To reproduce, run on s390 (would work on other platforms, too, but would
require a different filter name):
- Run 'kvm_stat -d'
- Press 'f'
- Enter 'instruct'
Notice that events like instruction_diag_44 or instruction_diag_500 are not
displayed - the output remains empty.
With this patch, we will filter by matching events and their parents.
However, consider the following example where we filter by
instruction_diag_44:

  kvm statistics - summary
                   regex filter: instruction_diag_44
   Event                                         Total %Total CurAvg/s
   exit_instruction                                276  100.0       12
     instruction_diag_44                           256   92.8       11
   Total                                           276              12

Note that the parent ('exit_instruction') displays the total events, but
the childs listed do not match its total (256 instead of 276). This is
intended (since we're filtering all but one child), but might be confusing
on first sight.

Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agoKVM: selftests: Wrap vcpu_nested_state_get/set functions with x86 guard
Thomas Huth [Thu, 23 May 2019 09:31:14 +0000 (11:31 +0200)]
KVM: selftests: Wrap vcpu_nested_state_get/set functions with x86 guard

struct kvm_nested_state is only available on x86 so far. To be able
to compile the code on other architectures as well, we need to wrap
the related code with #ifdefs.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agokvm: selftests: aarch64: compile with warnings on
Andrew Jones [Thu, 23 May 2019 10:16:34 +0000 (12:16 +0200)]
kvm: selftests: aarch64: compile with warnings on

aarch64 fixups needed to compile with warnings as errors.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agokvm: selftests: aarch64: fix default vm mode
Andrew Jones [Thu, 23 May 2019 11:05:46 +0000 (13:05 +0200)]
kvm: selftests: aarch64: fix default vm mode

VM_MODE_P52V48_4K is not a valid mode for AArch64. Replace its
use in vm_create_default() with a mode that works and represents
a good AArch64 default. (We didn't ever see a problem with this
because we don't have any unit tests using vm_create_default(),
but it's good to get it fixed in advance.)

Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agokvm: selftests: aarch64: dirty_log_test: fix unaligned memslot size
Andrew Jones [Thu, 23 May 2019 09:34:05 +0000 (11:34 +0200)]
kvm: selftests: aarch64: dirty_log_test: fix unaligned memslot size

The memory slot size must be aligned to the host's page size. When
testing a guest with a 4k page size on a host with a 64k page size,
then 3 guest pages are not host page size aligned. Since we just need
a nearly arbitrary number of extra pages to ensure the memslot is not
aligned to a 64 host-page boundary for this test, then we can use
16, as that's 64k aligned, but not 64 * 64k aligned.

Fixes: 76d58e0f07ec ("KVM: fix KVM_CLEAR_DIRTY_LOG for memory slots of unaligned size", 2019-04-17)
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agoKVM: s390: fix memory slot handling for KVM_SET_USER_MEMORY_REGION
Christian Borntraeger [Fri, 24 May 2019 14:06:23 +0000 (16:06 +0200)]
KVM: s390: fix memory slot handling for KVM_SET_USER_MEMORY_REGION

kselftests exposed a problem in the s390 handling for memory slots.
Right now we only do proper memory slot handling for creation of new
memory slots. Neither MOVE, nor DELETION are handled properly. Let us
implement those.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agoKVM: x86/pmu: do not mask the value that is written to fixed PMUs
Paolo Bonzini [Mon, 20 May 2019 15:34:30 +0000 (17:34 +0200)]
KVM: x86/pmu: do not mask the value that is written to fixed PMUs

According to the SDM, for MSR_IA32_PERFCTR0/1 "the lower-order 32 bits of
each MSR may be written with any value, and the high-order 8 bits are
sign-extended according to the value of bit 31", but the fixed counters
in real hardware are limited to the width of the fixed counters ("bits
beyond the width of the fixed-function counter are reserved and must be
written as zeros").  Fix KVM to do the same.

Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agoKVM: x86/pmu: mask the result of rdpmc according to the width of the counters
Paolo Bonzini [Mon, 20 May 2019 15:20:40 +0000 (17:20 +0200)]
KVM: x86/pmu: mask the result of rdpmc according to the width of the counters

This patch will simplify the changes in the next, by enforcing the
masking of the counters to RDPMC and RDMSR.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agox86/kvm/pmu: Set AMD's virt PMU version to 1
Borislav Petkov [Wed, 8 May 2019 17:02:48 +0000 (19:02 +0200)]
x86/kvm/pmu: Set AMD's virt PMU version to 1

After commit:

  672ff6cff80c ("KVM: x86: Raise #GP when guest vCPU do not support PMU")

my AMD guests started #GPing like this:

  general protection fault: 0000 [#1] PREEMPT SMP
  CPU: 1 PID: 4355 Comm: bash Not tainted 5.1.0-rc6+ #3
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
  RIP: 0010:x86_perf_event_update+0x3b/0xa0

with Code: pointing to RDPMC. It is RDPMC because the guest has the
hardware watchdog CONFIG_HARDLOCKUP_DETECTOR_PERF enabled which uses
perf. Instrumenting kvm_pmu_rdpmc() some, showed that it fails due to:

  if (!pmu->version)
   return 1;

which the above commit added. Since AMD's PMU leaves the version at 0,
that causes the #GP injection into the guest.

Set pmu->version arbitrarily to 1 and move it above the non-applicable
struct kvm_pmu members.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Cc: kvm@vger.kernel.org
Cc: Liran Alon <liran.alon@oracle.com>
Cc: Mihai Carabas <mihai.carabas@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: x86@kernel.org
Cc: stable@vger.kernel.org
Fixes: 672ff6cff80c ("KVM: x86: Raise #GP when guest vCPU do not support PMU")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agoKVM: x86: do not spam dmesg with VMCS/VMCB dumps
Paolo Bonzini [Mon, 20 May 2019 13:34:35 +0000 (15:34 +0200)]
KVM: x86: do not spam dmesg with VMCS/VMCB dumps

Userspace can easily set up invalid processor state in such a way that
dmesg will be filled with VMCS or VMCB dumps.  Disable this by default
using a module parameter.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agokvm: Check irqchip mode before assign irqfd
Peter Xu [Sun, 5 May 2019 08:56:42 +0000 (16:56 +0800)]
kvm: Check irqchip mode before assign irqfd

When assigning kvm irqfd we didn't check the irqchip mode but we allow
KVM_IRQFD to succeed with all the irqchip modes.  However it does not
make much sense to create irqfd even without the kernel chips.  Let's
provide a arch-dependent helper to check whether a specific irqfd is
allowed by the arch.  At least for x86, it should make sense to check:

- when irqchip mode is NONE, all irqfds should be disallowed, and,

- when irqchip mode is SPLIT, irqfds that are with resamplefd should
  be disallowed.

For either of the case, previously we'll silently ignore the irq or
the irq ack event if the irqchip mode is incorrect.  However that can
cause misterious guest behaviors and it can be hard to triage.  Let's
fail KVM_IRQFD even earlier to detect these incorrect configurations.

CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Radim Krčmář <rkrcmar@redhat.com>
CC: Alex Williamson <alex.williamson@redhat.com>
CC: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agokvm: svm/avic: fix off-by-one in checking host APIC ID
Suthikulpanit, Suravee [Tue, 14 May 2019 15:49:52 +0000 (15:49 +0000)]
kvm: svm/avic: fix off-by-one in checking host APIC ID

Current logic does not allow VCPU to be loaded onto CPU with
APIC ID 255. This should be allowed since the host physical APIC ID
field in the AVIC Physical APIC table entry is an 8-bit value,
and APIC ID 255 is valid in system with x2APIC enabled.
Instead, do not allow VCPU load if the host APIC ID cannot be
represented by an 8-bit value.

Also, use the more appropriate AVIC_PHYSICAL_ID_ENTRY_HOST_PHYSICAL_ID_MASK
instead of AVIC_MAX_PHYSICAL_ID_COUNT.

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agoKVM: selftests: do not blindly clobber registers in guest asm
Paolo Bonzini [Mon, 20 May 2019 11:31:02 +0000 (13:31 +0200)]
KVM: selftests: do not blindly clobber registers in guest asm

The guest_code of sync_regs_test is assuming that the compiler will not
touch %r11 outside the asm that increments it, which is a bit brittle.
Instead, we can increment a variable and use a dummy asm to ensure the
increment is not optimized away.  However, we also need to use a
callee-save register or the compiler will insert a save/restore around
the vmexit, breaking the whole idea behind the test.

(Yes, "if it ain't broken...", but I would like the test to be clean
before it is copied into the upcoming s390 selftests).

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agoKVM: selftests: Remove duplicated TEST_ASSERT in hyperv_cpuid.c
Thomas Huth [Mon, 20 May 2019 10:55:11 +0000 (12:55 +0200)]
KVM: selftests: Remove duplicated TEST_ASSERT in hyperv_cpuid.c

The check for entry->index == 0 is done twice. One time should
be sufficient.

Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agoKVM: LAPIC: Expose per-vCPU timer_advance_ns to userspace
Wanpeng Li [Mon, 20 May 2019 08:18:07 +0000 (16:18 +0800)]
KVM: LAPIC: Expose per-vCPU timer_advance_ns to userspace

Expose per-vCPU timer_advance_ns to userspace, so it is able to
query the auto-adjusted value.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agoKVM: LAPIC: Fix lapic_timer_advance_ns parameter overflow
Wanpeng Li [Mon, 20 May 2019 08:18:06 +0000 (16:18 +0800)]
KVM: LAPIC: Fix lapic_timer_advance_ns parameter overflow

After commit c3941d9e0 (KVM: lapic: Allow user to disable adaptive tuning of
timer advancement), '-1' enables adaptive tuning starting from default
advancment of 1000ns. However, we should expose an int instead of an overflow
uint module parameter.

Before patch:

/sys/module/kvm/parameters/lapic_timer_advance_ns:4294967295

After patch:

/sys/module/kvm/parameters/lapic_timer_advance_ns:-1

Fixes: c3941d9e0 (KVM: lapic: Allow user to disable adaptive tuning of timer advancement)
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agokvm: vmx: Fix -Wmissing-prototypes warnings
Yi Wang [Mon, 20 May 2019 04:27:47 +0000 (12:27 +0800)]
kvm: vmx: Fix -Wmissing-prototypes warnings

We get a warning when build kernel W=1:
arch/x86/kvm/vmx/vmx.c:6365:6: warning: no previous prototype for ‘vmx_update_host_rsp’ [-Wmissing-prototypes]
 void vmx_update_host_rsp(struct vcpu_vmx *vmx, unsigned long host_rsp)

Add the missing declaration to fix this.

Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agoKVM: nVMX: Fix using __this_cpu_read() in preemptible context
Wanpeng Li [Fri, 17 May 2019 08:49:50 +0000 (16:49 +0800)]
KVM: nVMX: Fix using __this_cpu_read() in preemptible context

 BUG: using __this_cpu_read() in preemptible [00000000] code: qemu-system-x86/4590
  caller is nested_vmx_enter_non_root_mode+0xebd/0x1790 [kvm_intel]
  CPU: 4 PID: 4590 Comm: qemu-system-x86 Tainted: G           OE     5.1.0-rc4+ #1
  Call Trace:
   dump_stack+0x67/0x95
   __this_cpu_preempt_check+0xd2/0xe0
   nested_vmx_enter_non_root_mode+0xebd/0x1790 [kvm_intel]
   nested_vmx_run+0xda/0x2b0 [kvm_intel]
   handle_vmlaunch+0x13/0x20 [kvm_intel]
   vmx_handle_exit+0xbd/0x660 [kvm_intel]
   kvm_arch_vcpu_ioctl_run+0xa2c/0x1e50 [kvm]
   kvm_vcpu_ioctl+0x3ad/0x6d0 [kvm]
   do_vfs_ioctl+0xa5/0x6e0
   ksys_ioctl+0x6d/0x80
   __x64_sys_ioctl+0x1a/0x20
   do_syscall_64+0x6f/0x6c0
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

Accessing per-cpu variable should disable preemption, this patch extends the
preemption disable region for __this_cpu_read().

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Fixes: 52017608da33 ("KVM: nVMX: add option to perform early consistency checks via H/W")
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agokvm: fix compilation on s390
Paolo Bonzini [Mon, 20 May 2019 10:06:36 +0000 (12:06 +0200)]
kvm: fix compilation on s390

s390 does not have memremap, even though in this particular case it
would be useful.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agokvm: x86: Include CPUID leaf 0x8000001e in kvm's supported CPUID
Jim Mattson [Wed, 27 Mar 2019 20:15:37 +0000 (13:15 -0700)]
kvm: x86: Include CPUID leaf 0x8000001e in kvm's supported CPUID

Kvm now supports extended CPUID functions through 0x8000001f.  CPUID
leaf 0x8000001e is AMD's Processor Topology Information leaf. This
contains similar information to CPUID leaf 0xb (Intel's Extended
Topology Enumeration leaf), and should be included in the output of
KVM_GET_SUPPORTED_CPUID, even though userspace is likely to override
some of this information based upon the configuration of the
particular VM.

Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Borislav Petkov <bp@suse.de>
Fixes: 8765d75329a38 ("KVM: X86: Extend CPUID range to include new leaf")
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agokvm: x86: Include multiple indices with CPUID leaf 0x8000001d
Jim Mattson [Wed, 27 Mar 2019 20:15:36 +0000 (13:15 -0700)]
kvm: x86: Include multiple indices with CPUID leaf 0x8000001d

Per the APM, "CPUID Fn8000_001D_E[D,C,B,A]X reports cache topology
information for the cache enumerated by the value passed to the
instruction in ECX, referred to as Cache n in the following
description. To gather information for all cache levels, software must
repeatedly execute CPUID with 8000_001Dh in EAX and ECX set to
increasing values beginning with 0 until a value of 00h is returned in
the field CacheType (EAX[4:0]) indicating no more cache descriptions
are available for this processor."

The termination condition is the same as leaf 4, so we can reuse that
code block for leaf 0x8000001d.

Fixes: 8765d75329a38 ("KVM: X86: Extend CPUID range to include new leaf")
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agoKVM: selftests: Compile code with warnings enabled
Thomas Huth [Fri, 17 May 2019 09:04:45 +0000 (11:04 +0200)]
KVM: selftests: Compile code with warnings enabled

So far the KVM selftests are compiled without any compiler warnings
enabled. That's quite bad, since we miss a lot of possible bugs this
way. Let's enable at least "-Wall" and some other useful warning flags
now, and fix at least the trivial problems in the code (like unused
variables).

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agokvm: selftests: avoid type punning
Paolo Bonzini [Mon, 20 May 2019 10:02:16 +0000 (12:02 +0200)]
kvm: selftests: avoid type punning

Avoid warnings from -Wstrict-aliasing by using memcpy.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agoKVM: selftests: Fix a condition in test_hv_cpuid()
Dan Carpenter [Tue, 14 May 2019 10:34:51 +0000 (13:34 +0300)]
KVM: selftests: Fix a condition in test_hv_cpuid()

The code is trying to check that all the padding is zeroed out and it
does this:

    entry->padding[0] == entry->padding[1] == entry->padding[2] == 0

Assume everything is zeroed correctly, then the first comparison is
true, the next comparison is false and false is equal to zero so the
overall condition is true.  This bug doesn't affect run time very
badly, but the code should instead just check that all three paddings
are zero individually.

Also the error message was copy and pasted from an earlier error and it
wasn't correct.

Fixes: 7edcb7343327 ("KVM: selftests: Add hyperv_cpuid test")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agoKVM: Fix spinlock taken warning during host resume
Wanpeng Li [Fri, 17 May 2019 08:49:49 +0000 (16:49 +0800)]
KVM: Fix spinlock taken warning during host resume

 WARNING: CPU: 0 PID: 13554 at kvm/arch/x86/kvm//../../../virt/kvm/kvm_main.c:4183 kvm_resume+0x3c/0x40 [kvm]
  CPU: 0 PID: 13554 Comm: step_after_susp Tainted: G           OE     5.1.0-rc4+ #1
  RIP: 0010:kvm_resume+0x3c/0x40 [kvm]
  Call Trace:
   syscore_resume+0x63/0x2d0
   suspend_devices_and_enter+0x9d1/0xa40
   pm_suspend+0x33a/0x3b0
   state_store+0x82/0xf0
   kobj_attr_store+0x12/0x20
   sysfs_kf_write+0x4b/0x60
   kernfs_fop_write+0x120/0x1a0
   __vfs_write+0x1b/0x40
   vfs_write+0xcd/0x1d0
   ksys_write+0x5f/0xe0
   __x64_sys_write+0x1a/0x20
   do_syscall_64+0x6f/0x6c0
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

Commit ca84d1a24 (KVM: x86: Add clock sync request to hardware enable) mentioned
that "we always hold kvm_lock when hardware_enable is called.  The one place that
doesn't need to worry about it is resume, as resuming a frozen CPU, the spinlock
won't be taken." However, commit 6706dae9 (virt/kvm: Replace spin_is_locked() with
lockdep) introduces a bug, it asserts when the lock is not held which is contrary
to the original goal.

This patch fixes it by WARN_ON when the lock is held.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Fixes: 6706dae9 ("virt/kvm: Replace spin_is_locked() with lockdep")
[Wrap with #ifdef CONFIG_LOCKDEP - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agoKVM: nVMX: Clear nested_run_pending if setting nested state fails
Sean Christopherson [Wed, 8 May 2019 18:04:32 +0000 (11:04 -0700)]
KVM: nVMX: Clear nested_run_pending if setting nested state fails

VMX's nested_run_pending flag is subtly consumed when stuffing state to
enter guest mode, i.e. needs to be set according before KVM knows if
setting guest state is successful.  If setting guest state fails, clear
the flag as a nested run is obviously not pending.

Reported-by: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agoKVM: nVMX: really fix the size checks on KVM_SET_NESTED_STATE
Paolo Bonzini [Mon, 20 May 2019 09:55:36 +0000 (11:55 +0200)]
KVM: nVMX: really fix the size checks on KVM_SET_NESTED_STATE

The offset for reading the shadow VMCS is sizeof(*kvm_state)+VMCS12_SIZE,
so the correct size must be that plus sizeof(*vmcs12).  This could lead
to KVM reading garbage data from userspace and not reporting an error,
but is otherwise not sensitive.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agoMerge tag 'kvmarm-fixes-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git...
Paolo Bonzini [Fri, 24 May 2019 19:27:00 +0000 (21:27 +0200)]
Merge tag 'kvmarm-fixes-for-5.2' of git://git./linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm updates for 5.2-rc2

- Correctly annotate HYP-callable code to be non-traceable
- Remove Christoffer from the MAINTAINERS file as his request

5 years agoMerge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Linus Torvalds [Fri, 24 May 2019 18:03:26 +0000 (11:03 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull more arm64 fixes from Will Deacon:

 - Fix incorrect LDADD instruction encoding in our disassembly macros

 - Disable the broken ARM64_PSEUDO_NMI support for now

 - Add workaround for Cortex-A76 CPU erratum #1463225

 - Handle Cortex-A76/Neoverse-N1 erratum #1418040 w/ existing workaround

 - Fix IORT build failure if IOMMU_SUPPORT=n

 - Fix place-relative module relocation range checking and its
   interaction with KASLR

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: insn: Add BUILD_BUG_ON() for invalid masks
  arm64: insn: Fix ldadd instruction encoding
  arm64: Kconfig: Make ARM64_PSEUDO_NMI depend on BROKEN for now
  arm64: Handle erratum 1418040 as a superset of erratum 1188873
  arm64/module: deal with ambiguity in PRELxx relocation ranges
  ACPI/IORT: Fix build error when IOMMU_SUPPORT is disabled
  arm64/kernel: kaslr: reduce module randomization range to 2 GB
  arm64: errata: Add workaround for Cortex-A76 erratum #1463225
  arm64: Remove useless message during oops

5 years agodrm/i915: Update DRIVER_DATE to 20190524
Jani Nikula [Fri, 24 May 2019 17:35:22 +0000 (20:35 +0300)]
drm/i915: Update DRIVER_DATE to 20190524

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
5 years agoMerge tag 'platform-drivers-x86-v5.2-2' of git://git.infradead.org/linux-platform...
Linus Torvalds [Fri, 24 May 2019 17:19:26 +0000 (10:19 -0700)]
Merge tag 'platform-drivers-x86-v5.2-2' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver fixes from Andy Shevchenko:
 "Some of Intel Cherrytrail based platforms depend on PMC clock to be
  always on. Here are a couple of quirks to the driver to support
  affected hardware"

* tag 'platform-drivers-x86-v5.2-2' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: pmc_atom: Add several Beckhoff Automation boards to critclk_systems DMI table
  platform/x86: pmc_atom: Add Lex 3I380D industrial PC to critclk_systems DMI table

5 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux...
Linus Torvalds [Fri, 24 May 2019 17:04:17 +0000 (10:04 -0700)]
Merge branch 'fixes' of git://git./linux/kernel/git/evalenti/linux-soc-thermal

Pull thermal SoC fixes from Eduardo Valentin:

 - revert pinctrl settings on rockchip which causes boot failure on
   rk3288. The proper follow-up patch is being discussed, meanwhile
   the revert gets those booting again.

 - minor fixes on rcar and tegra

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
  thermal: rcar_gen3_thermal: Update temperature conversion method
  thermal: rcar_gen3_thermal: Update calculation formula of IRQTEMP
  thermal: rcar_gen3_thermal: Update value of Tj_1
  thermal: tegra: Make tegra210_tsensor_thermtrips static
  Revert "thermal: rockchip: fix up the tsadc pinctrl setting error"

5 years agoMerge tag 'mmc-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Linus Torvalds [Fri, 24 May 2019 16:57:11 +0000 (09:57 -0700)]
Merge tag 'mmc-v5.2-2' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
 "Fix HS50 data hold time problem for a few variants of sdhci-iproc"

* tag 'mmc-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-iproc: Set NO_HISPD bit to fix HS50 data hold time problem
  mmc: sdhci-iproc: cygnus: Set NO_HISPD bit to fix HS50 data hold time problem

5 years agoMerge tag 'drm-fixes-2019-05-24-1' of git://anongit.freedesktop.org/drm/drm
Linus Torvalds [Fri, 24 May 2019 16:12:46 +0000 (09:12 -0700)]
Merge tag 'drm-fixes-2019-05-24-1' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "Nothing too unusual here for rc2. Except the amdgpu DMCU firmware
  loading fix caused build breakage with a different set of Kconfig
  options. I've just reverted it for now until the AMD folks can rewrite
  it to avoid that problem.

  i915:
   - boosting fix
   - bump ready task fixes
   - GVT - reset fix, error return, TRTT handling fix

  amdgpu:
   - DMCU firmware loading fix
   - Polaris 10 pci id for kfd
   - picasso screen corruption fix
   - SR-IOV fixes
   - vega driver reload fixes
   - SMU locking fix
   - compute profile fix for kfd

  vmwgfx:
   - integer overflow fixes
   - dma sg fix

  sun4i:
   - HDMI phy fixes

  gma500:
   - LVDS detection fix

  panfrost:
   - devfreq selection fix"

* tag 'drm-fixes-2019-05-24-1' of git://anongit.freedesktop.org/drm/drm: (32 commits)
  Revert "drm/amd/display: Don't load DMCU for Raven 1"
  drm/panfrost: Select devfreq
  drm/gma500/cdv: Check vbt config bits when detecting lvds panels
  drm/vmwgfx: integer underflow in vmw_cmd_dx_set_shader() leading to an invalid read
  drm/vmwgfx: NULL pointer dereference from vmw_cmd_dx_view_define()
  drm/vmwgfx: Use the dma scatter-gather iterator to get dma addresses
  drm/vmwgfx: Fix compat mode shader operation
  drm/vmwgfx: Fix user space handle equal to zero
  drm/vmwgfx: Don't send drm sysfs hotplug events on initial master set
  drm/i915/gvt: Fix an error code in ppgtt_populate_spt_by_guest_entry()
  drm/i915/gvt: do not let TRTTE and 0x4dfc write passthrough to hardware
  drm/i915/gvt: add 0x4dfc to gen9 save-restore list
  drm/i915/gvt: Tiled Resources mmios are in-context mmios for gen9+
  drm/i915/gvt: use cmd to restore in-context mmios to hw for gen9 platform
  drm/i915/gvt: emit init breadcrumb for gvt request
  drm/amdkfd: Fix compute profile switching
  drm/amdgpu: skip fw pri bo alloc for SRIOV
  drm/amd/powerplay: fix locking in smu_feature_set_supported()
  drm/amdgpu/gmc9: set vram_width properly for SR-IOV
  drm/amdgpu/soc15: skip reset on init
  ...

5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 125
Thomas Gleixner [Thu, 23 May 2019 09:15:02 +0000 (11:15 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 125

Based on 1 normalized pattern(s):

  osl gpl code release authorized by [jalil] [fadavi] this program is
  free software you can redistribute it and or modify it under the
  terms of the gnu general public license as published by the free
  software foundation either version 2 or at your option any later
  version this program is distributed in the hope that it will be
  useful but without any warranty without even the implied warranty of
  merchantability or fitness for a particular purpose see the gnu
  general public license for more details you should have received a
  copy of the gnu general public license along with this program see
  the file copying if not write to the free software foundation 675
  mass ave cambridge ma 02139 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190523091651.689335553@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 123
Thomas Gleixner [Thu, 23 May 2019 09:15:00 +0000 (11:15 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 123

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms and conditions of the gnu general public license
  version 2 or later as published by the free software foundation this
  program is distributed in the hope that it will be useful but
  without any warranty without even the implied warranty of
  merchantability or fitness for a particular purpose see the gnu
  general public license for more details you should have received a
  copy of the gnu general public license along with this program if
  not see http www gnu org licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 7 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190523091651.504392586@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 122
Thomas Gleixner [Thu, 23 May 2019 09:14:59 +0000 (11:14 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 122

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 2 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190523091651.414247666@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 121
Thomas Gleixner [Thu, 23 May 2019 09:14:58 +0000 (11:14 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 121

Based on 1 normalized pattern(s):

  licensed under the gplv2 or at your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190523091651.323272658@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 120
Thomas Gleixner [Thu, 23 May 2019 09:14:57 +0000 (11:14 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 120

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not see the file copying or write to the free
  software foundation inc

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 12 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190523091651.231300438@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 119
Thomas Gleixner [Thu, 23 May 2019 09:14:56 +0000 (11:14 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 119

Based on 1 normalized pattern(s):

  released under the gpl this program is free software you can
  redistribute it and or modify it under the terms of the gnu general
  public license as published by the free software foundation either
  version 2 of the license or at your option any later version this
  program is distributed in the hope that it will be useful but
  without any warranty without even the implied warranty of
  merchantability or fitness for a particular purpose see the gnu
  general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 2 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190523091651.124582774@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 118
Thomas Gleixner [Thu, 23 May 2019 09:14:55 +0000 (11:14 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 118

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 or at your option any
  later version this program is distributed in the hope that it will
  be useful but without any warranty without even the implied warranty
  of merchantability or fitness for a particular purpose see the gnu
  general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 44 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190523091651.032047323@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 116
Thomas Gleixner [Thu, 23 May 2019 09:14:53 +0000 (11:14 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 116

Based on 1 normalized pattern(s):

  gpl license this program is free software you can redistribute it
  and or modify it under the terms of the gnu general public license
  as published by the free software foundation either version 2 of the
  license or at your option any later version this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not write to the free
  software foundation inc 59 temple place suite 330 boston ma 02111
  1307 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190523091650.847878191@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 114
Thomas Gleixner [Thu, 23 May 2019 09:14:51 +0000 (11:14 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 114

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 8 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190523091650.663497195@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>