drm/edid: add EDID block count and size helpers

Add some helpers to figure out the EDID extension block count, block
count, size, pointers to blocks.

Unfortunately, we'll need to cast away the const in a few places where
we actually need to access the data.

v3: fix (!edid_extension_block_count(edid) == 0) (kernel test robot)

v2: fix s/j/i/ introduced in a rebase

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/dc7b0850293d837439fb3914c8a9d81e39018b4b.1649685475.git.jani.nikula@intel.com

drm/edid: add single point of return to drm_do_get_edid()

This will be useful in the future. Use fail label for fail exit.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8e564e9415baa4dc9dc3127e4200b2618a8a3ba0.1649685475.git.jani.nikula@intel.com

drm/edid: drop extra local var

We don't need override as a variable for anything.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4d249173b34758e1d6c4a74eb98518d180f0a8ae.1649685475.git.jani.nikula@intel.com

drm/edid: convert extension block read to EDID block read helper

Use the EDID block read helper also for extension block reads, making
edid_block_read() the only place with the read retry logic.

Note: We observe that drm_do_get_edid() does not use invalid extension
blocks to flag the EDID as corrupt.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a6328b898db40235b85ad4635374bc0768b5a970.1649685475.git.jani.nikula@intel.com

drm/edid: use EDID block read helper in drm_do_get_edid()

Convert drm_do_get_edit() from the base block read helper to the generic
block read helper. There's quite a bit going on here, as the corrupt and
null EDID information is moved back to the caller. As we see, they were
not all that clear to begin with, and this change underlines that.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3bcf98453770757ee93386da0cfbc6552d42a312.1649685475.git.jani.nikula@intel.com

drm/edid: abstract an EDID block read helper

We have an abstraction for the EDID base block read, yet duplicating the
retries and error handling for extension block reads. Introduce a more
generic EDID block read helper.

Switch to the helper piecemeal, starting with drm_edid_get_panel_id(),
which doesn't need or have access to the connector anyway.

The subtle change is switching from drm_edid_block_valid() to
edid_block_check(). We also status print once, not for every attempt.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/47560f7530e4a7b32b56cb9038178244fe30a4af.1649685475.git.jani.nikula@intel.com

drm/edid: add typedef for block read function

Make the callback a bit easier on the eye.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/10b8721bb7ea8c7df1fd0c1d97c5d446905abbf4.1649685475.git.jani.nikula@intel.com

drm/edid: pass struct edid to connector_bad_edid()

Avoid casting here and there, and make it const.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4f9fdc961dfd9b36f4649e8ba57d05e43375fc92.1649685475.git.jani.nikula@intel.com

drm/edid: add a helper to log dump an EDID block

Unify debug log dumping. There's duplication in the error paths for EDID
block validity checks, but this should be neglible.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b56f120a26f54b0defc43faa6d49e26f072d4d8f.1649685475.git.jani.nikula@intel.com

drm/edid: refactor EDID block status printing

Split out a function to log EDID block status. The printouts get changed
slightly.

Unfortunately, not all users will have struct drm_device available, so
we convert to pr_* debug logging instead of drm device based logging.

v2: Complain more loudly about unknown status codes (Ville)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/98d12db95e55e2e18548822078ec3b16ae006732.1649685475.git.jani.nikula@intel.com

drm/edid: have edid_block_check() detect blocks that are all zero

We have the check function, have it also detect blocks that are all zero
instead of leaving that to callers.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f9ad302e6b7dbcd1dff98d94ec5500ce27bebe10.1649685475.git.jani.nikula@intel.com

drm/edid: convert edid_is_zero() to edid_block_is_zero() for blocks

As edid_is_zero() is only ever used on EDID blocks, convert it to
edid_block_is_zero() with implicit block size.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5cc9387e22b4a61243df4053d1ebcc14b0007dc8.1649685475.git.jani.nikula@intel.com

fbcon: Fix delayed takeover locking

I messed up the delayed takover path in the locking conversion in
6e7da3af008b ("fbcon: Move console_lock for register/unlink/unregister").

If CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is enabled, fbcon take-over
doesn't take place when calling fbcon_fb_registered(). Instead, is deferred
using a workqueue and its fbcon_register_existing_fbs() function calls to
fbcon_fb_registered() again for each registered fbcon fb.

This leads to the console_lock tried to be held twice, causing a deadlock.

Fix it by re-extracting the lockless function and using it in the
delayed takeover path, where we need to hold the lock already to
iterate over the list of already registered fb. Well the current code
still is broken in there (since the list is protected by a
registration_lock, which we can't take here because it nests the other
way round with console_lock), but in the future this will be a list
protected by console_lock when this is all sorted out.

While reviewing the broken commit I realized that I've left some
outdated comments about the locking behind. Fix those too.

v2: Improve commit message (Javier)

Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Fixes: 6e7da3af008b ("fbcon: Move console_lock for register/unlink/unregister")
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Du Cheng <ducheng2@gmail.com>
Cc: Claudio Suarez <cssk@net-c.es>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Zheyu Ma <zheyuma97@gmail.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Helge Deller <deller@gmx.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220413082128.348186-1-daniel.vetter@ffwll.ch

drm/panel: lvds: Use bus_flags from DT panel-timing property

This driver currently rewrites bus_flags based solely on the value of
DT property 'data-mirror' and ignores bus_flags which might have been
set in DT panel-timing node. Specificaly, the 'de-active' DT property
sets DRM_BUS_FLAG_DE_ bus_flags.

Since of_get_drm_panel_display_mode() conveniently parses the bus_flags
out of DT panel-timing property, just ORR them with bus_flags inferred
from 'data-mirror' DT property and use the result as panel bus_flags.

This fixes handling of panels with 'panel-timing { de-active = <1>; };'.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220401162154.295152-2-marex@denx.de

drm/panel: lvds: Simplify mode parsing

The mode parsing is currently implemented in three steps:
of_get_display_timing() - DT panel-timing to struct display_timing
videomode_from_timing() - struct display_timing to struct videomode
drm_display_mode_from_videomode() - struct videomode to struct drm_display_mode

Replace all that with simple of_get_drm_panel_display_mode() call,
which already populates struct drm_display_mode and then duplicate
that mode in panel_lvds_get_modes() each time, since the mode does
not change.

Nice bonus is the bus_flags parsed by of_get_drm_panel_display_mode()
out of panel-timing DT node, which is used in subsequent patch to fix
handling of 'de-active' DT property.

Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220401162154.295152-1-marex@denx.de

drm: bridge: icn6211: Convert to regmap

To make debugging easier, convert driver to regmap. Implement read and write
regmap tables for known registers, keep all known register readable and mark
those which are obviously read-only as not writeable.

Use common I2C regmap for the I2C configuration, implement custom regmap bus
for DSI configuration. The later is mandatory as this chip requires one extra
byte set to read access length between register address and data.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220403171004.368464-1-marex@denx.de

drm/ttm: fix kerneldoc for ttm_lru_bulk_move

Update the kerneldoc for the members as well.

Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: b0e2c9ea5afc ("drm/ttm: allow bulk moves for all domains")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220413091242.638413-1-christian.koenig@amd.com

drm/ttm: fixup ttm_bo_add_move_fence v2

It looks like we still need to call dma_fence_put() on the man->move,
otherwise we just end up leaking it, leading to fireworks later.

v2(Daniel):
  - Simplify the function tail

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5689
Fixes: 8bb31587820a ("drm/ttm: remove bo->moving")
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220413082133.272445-1-matthew.auld@intel.com

fbcon: use min() to make code cleaner

Use min() in order to make code cleaner.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209084810.1561184-1-deng.changcheng@zte.com.cn

drm/ttm: stop passing NULL fence in ttm_bo_move_sync_cleanup

If we hit the sync case, like when skipping clearing for kernel internal
objects, or when falling back to cpu clearing, like in i915, we end up
trying to add a NULL fence, but with some recent changes in this area
this now just results in NULL deref in dma_resv_add_fence:

<1>[    5.466383] BUG: kernel NULL pointer dereference, address: 0000000000000008
<1>[    5.466384] #PF: supervisor read access in kernel mode
<1>[    5.466385] #PF: error_code(0x0000) - not-present page
<6>[    5.466386] PGD 0 P4D 0
<4>[    5.466387] Oops: 0000 [#1] PREEMPT SMP NOPTI
<4>[    5.466389] CPU: 5 PID: 267 Comm: modprobe Not tainted 5.18.0-rc2-CI-CI_DRM_11481+ #1
<4>[    5.466391] RIP: 0010:dma_resv_add_fence+0x63/0x260
<4>[    5.466395] Code: 38 85 c0 0f 84 df 01 00 00 0f 88 e8 01 00 00 83 c0 01 0f 88 df 01 00 00 8b 05 35 89 10 01 49 8d 5e 68 85 c0 0f 85 45 01 00 00 <48> 8b 45 08 48 3d c0 a5 0a 82 0f 84 5c 01 00 00 48 3d 60 a5 0a 82
<4>[    5.466396] RSP: 0018:ffffc90000e974f8 EFLAGS: 00010202
<4>[    5.466397] RAX: 0000000000000001 RBX: ffff888123e88b28 RCX: 00000000ffffffff
<4>[    5.466398] RDX: 0000000000000001 RSI: ffffffff822e4f50 RDI: ffffffff8233f087
<4>[    5.466399] RBP: 0000000000000000 R08: ffff8881313dbc80 R09: 0000000000000001
<4>[    5.466399] R10: 0000000000000001 R11: 00000000da354294 R12: 0000000000000000
<4>[    5.466400] R13: ffff88810927dc58 R14: ffff888123e88ac0 R15: ffff88810a88d600
<4>[    5.466401] FS:  00007f5fa1193540(0000) GS:ffff88845d880000(0000) knlGS:0000000000000000
<4>[    5.466402] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[    5.466402] CR2: 0000000000000008 CR3: 0000000106dd6003 CR4: 00000000003706e0
<4>[    5.466403] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
<4>[    5.466404] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
<4>[    5.466404] Call Trace:
<4>[    5.466405]  <TASK>
<4>[    5.466406]  ttm_bo_move_accel_cleanup+0x62/0x270 [ttm]
<4>[    5.466411]  ? i915_rsgt_from_buddy_resource+0x185/0x1e0 [i915]
<4>[    5.466529]  i915_ttm_move+0xfd/0x430 [i915]
<4>[    5.466833]  ? dma_resv_reserve_fences+0x4e/0x320
<4>[    5.466836]  ? ttm_bo_add_move_fence.constprop.20+0xf7/0x140 [ttm]
<4>[    5.466841]  ttm_bo_handle_move_mem+0xa1/0x140 [ttm]
<4>[    5.466845]  ttm_bo_validate+0xee/0x160 [ttm]
<4>[    5.466849]  __i915_ttm_get_pages+0x4f/0x210 [i915]
<4>[    5.466976]  i915_ttm_get_pages+0xad/0x140 [i915]
<4>[    5.467094]  ____i915_gem_object_get_pages+0x32/0xf0 [i915]
<4>[    5.467210]  __i915_gem_object_get_pages+0x89/0xa0 [i915]
<4>[    5.467323]  i915_vma_get_pages+0x114/0x1d0 [i915]
<4>[    5.467446]  i915_vma_pin_ww+0xd3/0xa90 [i915]
<4>[    5.467570]  i915_vma_pin.constprop.10+0x119/0x1b0 [i915]
<4>[    5.467700]  ? __mutex_unlock_slowpath+0x3e/0x2b0
<4>[    5.467704]  intel_alloc_initial_plane_obj.isra.6+0x1a9/0x390 [i915]
<4>[    5.467833]  intel_crtc_initial_plane_config+0x83/0x340 [i915]

In the ttm_bo_move_sync_cleanup() case it seems we only really care
about calling ttm_bo_wait_free_node(), so let's instead just call that
directly.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Nirmoy Das <nirmoy.das@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220411085603.58156-1-matthew.auld@intel.com

drm: Use drm_mode_copy()

struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.

Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.

Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.

@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}

@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)

@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)

@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-23-ville.syrjala@linux.intel.com
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>

drm: Use drm_mode_init() for on-stack modes

Initialize on-stack modes with drm_mode_init() to guarantee
no stack garbage in the list head, or that we aren't copying
over another mode's list head.

Based on the following cocci script, with manual fixups:
@decl@
identifier M;
expression E;
@@
- struct drm_display_mode M = E;
+ struct drm_display_mode M;

@@
identifier decl.M;
expression decl.E;
statement S, S1;
@@
struct drm_display_mode M;
... when != S
+ drm_mode_init(&M, &E);
+
S1

@@
expression decl.E;
@@
- &*E
+ E

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-22-ville.syrjala@linux.intel.com
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>

drm: mali-dp: potential dereference of null pointer

The return value of kzalloc() needs to be checked.
To avoid use of null pointer '&state->base' in case of the
failure of alloc.

Fixes: 99665d072183 ("drm: mali-dp: add malidp_crtc_state struct")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214100837.46912-1-jiasheng@iscas.ac.cn

drm/arm/malidp: Stop using iommu_present()

iommu_get_domain_for_dev() is already perfectly happy to return NULL
if the given device has no IOMMU. Drop the unnecessary check.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5049994e6c2ba92c2f30d51850c8929136d0f8ca.1649167878.git.robin.murphy@arm.com

drm/komeda: return early if drm_universal_plane_init() fails.

If drm_universal_plane_init() fails early we jump to the common cleanup code
that calls komeda_plane_destroy() which in turn could access the uninitalised
drm_plane and crash. Return early if an error is detected without going through
the common code.

Reported-by: Steven Price <steven.price@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/dri-devel/20211203100946.2706922-1-liviu.dudau@arm.com

drm/komeda: Fix an undefined behavior bug in komeda_plane_add()

In komeda_plane_add(), komeda_get_layer_fourcc_list() is assigned to
formats and used in drm_universal_plane_init().
drm_universal_plane_init() passes formats to
__drm_universal_plane_init(). __drm_universal_plane_init() further
passes formats to memcpy() as src parameter, which could lead to an
undefined behavior bug on failure of komeda_get_layer_fourcc_list().

Fix this bug by adding a check of formats.

This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.

Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.

Builds with CONFIG_DRM_KOMEDA=m show no new warnings,
and our static analyzer no longer warns about this code.

Fixes: 61f1c4a8ab75 ("drm/komeda: Attach komeda_dev to DRM-KMS")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/dri-devel/20211201033704.32054-1-zhou1615@umn.edu

drm/ingenic: Add dw-hdmi driver specialization for jz4780

A specialisation of the generic Synopsys HDMI driver is employed for
JZ4780 HDMI support. This requires a new driver, plus device tree and
configuration modifications.

Here we add Kconfig DRM_INGENIC_DW_HDMI, Makefile and driver code.

Note that there is no hpd-gpio installed on the CI20 board HDMI
connector. Hence there is no hpd detection by the connector driver
and we have to enable polling in the dw-hdmi core driver.

For that we need to set .poll_enabled but that struct component
can only be accessed by core code. Hence we use the public
setter function drm_kms_helper_hotplug_event() introduced before.

Also note that we disable Color Space Conversion since it is not
working on jz4780.

Signed-off-by: Paul Boddie <paul@boddie.org.uk>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/e5cdf9cd44bde52cce379cc830f2d6117ea15c32.1649330171.git.hns@goldelico.com

drm/ingenic: Implement proper .atomic_get_input_bus_fmts

The .atomic_get_input_bus_fmts() callback of our top bridge should
return the possible input formats for a given output format. If the
requested output format is not supported, then NULL should be returned,
otherwise the bus format negociation will end with a bus format that the
encoder does not support.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/ab25925723cff2f3e773e7137567ef86fff5fdba.1649330171.git.hns@goldelico.com

drm/bridge: display-connector: add ddc-en gpio support

"hdmi-connector.yaml" bindings defines an optional property
"ddc-en-gpios" for a single gpio to enable DDC operation.

Usually this controls +5V power on the HDMI connector.
This +5V may also be needed for HPD.

This was not reflected in code but is needed to make the CI20
board work.

Now, the driver activates the ddc gpio after probe and
deactivates after remove so it is "almost on".

But only if this driver is loaded (and not e.g. blacklisted
as module).

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/3607e924b7c0cf0be956c0d49894be1442dbda41.1649330171.git.hns@goldelico.com

drm/ttm: fix logic inversion in ttm_eu_reserve_buffers

That should have been max, not min.

Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: c8d4c18bfbc4 ("dma-buf/drivers: make reserving a shared slot mandatory v4")
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220411134537.2854-1-christian.koenig@amd.com

drm: add a check to verify the size alignment

Add a simple check to reject any size not aligned to the
min_page_size.

when size is not aligned to min_page_size, driver module
should handle in their own way either to round_up() the
size value to min_page_size or just to enable WARN_ON().

If we dont handle the alignment properly, we may hit the
following bug, Unigine Heaven has allocation requests for
example required pages are 257 and alignment request is 256.
To allocate the left over 1 page, continues the iteration to
find the order value which is 0 and when it compares with
min_order = 8, triggers the BUG_ON(order < min_order).

v2: add more commit description
v3: remove WARN_ON()

Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220411073834.15210-1-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/vc4: kms: Improve logging

When debugging, finding out what muxing decisions were made and what the
actual core clock rate is is always useful, so let's add some more
messages.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220328153659.2382206-7-maxime@cerno.tech

drm/vc4: kms: Warn if we have an incompatible muxing setup

The documentation explicitly states we must prevent the output
2 and 3 from feeding from the same HVS channel.

Let's add a warning to make some noise if we ever find ourselves in such
a case.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220328153659.2382206-6-maxime@cerno.tech

drm/vc4: kms: Store channel in local variable

We use the channel from our vc4_crtc_state structure in multiple places,
let's store it in a local variable to make it cleaner.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220328153659.2382206-5-maxime@cerno.tech

drm/vc4: txp: Force alpha to be 0xff if it's disabled

If we use a format that has padding instead of the alpha component (such
as XRGB8888), it appears that the Transposer will fill the padding to 0,
disregarding what was stored in the input buffer padding.

This leads to issues with IGT, since it will set the padding to 0xff,
but will then compare the CRC of the two frames which will thus fail.
Another nice side effect is that it is now possible to just use the
buffer as ARGB.

Fixes: 008095e065a8 ("drm/vc4: Add support for the transposer block")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220328153659.2382206-4-maxime@cerno.tech

drm/vc4: txp: Don't set TXP_VSTART_AT_EOF

The TXP_VSTART_AT_EOF will generate a second VSTART signal to the HVS.
However, the HVS waits for VSTART to enable the FIFO and will thus start
filling the FIFO before the start of the frame.

This leads to corruption at the beginning of the first frame, and
content from the previous frame at the beginning of the next frames.

Since one VSTART is enough, let's get rid of it.

Fixes: 008095e065a8 ("drm/vc4: Add support for the transposer block")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220328153659.2382206-3-maxime@cerno.tech

drm/vc4: hvs: Reset muxes at probe time

By default, the HVS driver will force the HVS output 3 to be muxed to
the HVS channel 2. However, the Transposer can only be assigned to the
HVS channel 2, so whenever we try to use the writeback connector, we'll
mux its associated output (Output 2) to the channel 2.

This leads to both the output 2 and 3 feeding from the same channel,
which is explicitly discouraged in the documentation.

In order to avoid this, let's reset all the output muxes to their reset
value.

Fixes: 87ebcd42fb7b ("drm/vc4: crtc: Assign output to channel automatically")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220328153659.2382206-2-maxime@cerno.tech

drm/i915: fix i915_gem_object_wait_moving_fence

All of CI is just failing with the following, which prevents loading of
the module:

    i915 0000:03:00.0: [drm] *ERROR* Scratch setup failed

Best guess is that this comes from the pin_map() for the scratch page,
which does an i915_gem_object_wait_moving_fence() somewhere. It looks
like this now calls into dma_resv_wait_timeout() which can return the
remaining timeout, leading to the caller thinking this is an error.

v2(Lucas): handle ret == 0

Fixes: 1d7f5e6c5240 ("drm/i915: drop bo->moving dependency")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20220408084205.1353427-1-matthew.auld@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/amdgpu: add drm buddy support to amdgpu

- Switch to drm buddy allocator
- Add resource cursor support for drm buddy

v2(Matthew Auld):
  - replace spinlock with mutex as we call kmem_cache_zalloc
    (..., GFP_KERNEL) in drm_buddy_alloc() function

  - lock drm_buddy_block_trim() function as it calls
    mark_free/mark_split are all globally visible

v3(Matthew Auld):
  - remove trim method error handling as we address the failure case
    at drm_buddy_block_trim() function

v4:
  - fix warnings reported by kernel test robot <lkp@intel.com>

v5:
  - fix merge conflict issue

v6:
  - fix warnings reported by kernel test robot <lkp@intel.com>

v7:
  - remove DRM_BUDDY_RANGE_ALLOCATION flag usage

v8:
  - keep DRM_BUDDY_RANGE_ALLOCATION flag usage
  - resolve conflicts created by drm/amdgpu: remove VRAM accounting v2

v9(Christian):
  - merged the below patch
     - drm/amdgpu: move vram inline functions into a header
  - rename label name as fallback
  - move struct amdgpu_vram_mgr to amdgpu_vram_mgr.h
  - remove unnecessary flags from struct amdgpu_vram_reservation
  - rewrite block NULL check condition
  - change else style as per coding standard
  - rewrite the node max size
  - add a helper function to fetch the first entry from the list

v10(Christian):
   - rename amdgpu_get_node() function name as amdgpu_vram_mgr_first_block

v11:
   - if size is not aligned with min_page_size, enable is_contiguous flag,
     therefore, the size round up to the power of two and trimmed to the
     original size.
v12:
   - rename the function names having prefix as amdgpu_vram_mgr_*()
   - modify the round_up() logic conforming to contiguous flag enablement
     or if size is not aligned to min_block_size
   - modify the trim logic
   - rename node as block wherever applicable

Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407224843.2416-1-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/i915: fix broken build

I guess this was missed in the conversion or something.

Fixes: 7bc80a5462c3 ("dma-buf: add enum dma_resv_usage v4")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407164532.1242578-1-matthew.auld@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>

fbcon: Maintain a private array of fb_info

Accessing the one in fbmem.c without taking the right locks is a bad
idea. Instead maintain our own private copy, which is fully protected
by console_lock() (like everything else in fbcon.c). That copy is
serialized through fbcon_fb_registered/unregistered() calls.

Also this means we do not need to hold a full fb_info reference, which
is nice because doing so would mean a refcount loop between the
console and the fb_info. But it's also not nice since it means
console_lock() must be held absolutely everywhere. Well strictly
speaking we could still try to do some refcounting games again by
calling get_fb_info before we drop the console_lock. But things will
get tricky.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Claudio Suarez <cssk@net-c.es>
Cc: Du Cheng <ducheng2@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405210335.3434130-18-daniel.vetter@ffwll.ch

fbcon: untangle fbcon_exit

There's a bunch of confusions going on here:
- The deferred fbcon setup notifier should only be cleaned up from
  fb_console_exit(), to be symmetric with fb_console_init()
- We also need to make sure we don't race with the work, which means
  temporarily dropping the console lock (or we can deadlock)
- That also means no point in clearing deferred_takeover, we are
  unloading everything anyway.
- Finally rename fbcon_exit to fbcon_release_all and move it, since
  that's what's it doing when being called from consw->con_deinit
  through fbcon_deinit.

To answer a question from Sam just quoting my own reply:

> We loose the call to fbcon_release_all() here [in fb_console_exit()].
> We have part of the old fbcon_exit() above, but miss the release parts.

Ah yes that's the entire point of this change. The release_all in the
fbcon exit path was only needed when fbcon was a separate module
indepedent from core fb.ko. Which means it was possible to unload fbcon
while having fbdev drivers registered.

But since we've merged them that has become impossible, so by the time the
fb.ko module can be unloaded, there's guaranteed to be no fbdev drivers
left. And hence removing them is pointless.

v2: Explain the why better (Sam)

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Claudio Suarez <cssk@net-c.es>
Cc: Du Cheng <ducheng2@gmail.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405210335.3434130-17-daniel.vetter@ffwll.ch

fbcon: Move more code into fbcon_release

con2fb_release_oldinfo() has a bunch more kfree() calls than
fbcon_exit(), but since kfree() on NULL is harmless doing that in both
places should be ok. This is also a bit more symmetric now again with
fbcon_open also allocating the fbcon_ops structure.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Du Cheng <ducheng2@gmail.com>
Cc: Claudio Suarez <cssk@net-c.es>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405210335.3434130-16-daniel.vetter@ffwll.ch

fbcon: Move console_lock for register/unlink/unregister

Ideally console_lock becomes an implementation detail of fbcon.c and
doesn't show up anywhere in fbmem.c. We're still pretty far from that,
but at least the register/unregister code is there now.

With this the do_fb_ioctl() handler is the only code in fbmem.c still
calling console_lock().

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Du Cheng <ducheng2@gmail.com>
Cc: Claudio Suarez <cssk@net-c.es>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Zheyu Ma <zheyuma97@gmail.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405210335.3434130-15-daniel.vetter@ffwll.ch

fbcon: Consistently protect deferred_takeover with console_lock()

This shouldn't be a problem in practice since until we've actually
taken over the console there's nothing we've registered with the
console/vt subsystem, so the exit/unbind path that check this can't
do the wrong thing. But it's confusing, so fix it by moving it a tad
later.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Du Cheng <ducheng2@gmail.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Claudio Suarez <cssk@net-c.es>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405210335.3434130-14-daniel.vetter@ffwll.ch

fbcon: use lock_fb_info in fbcon_open/release

Now we get to the real motiviation, because fbmem.c insists that
that's the right lock for these.

Ofc fbcon.c has a lot more places where it probably should call
lock_fb_info(). But looking at fbmem.c at least most of these seem to
be protected by console_lock() too, which is probably what papers over
any issues.

Note that this means we're shuffling around a bit the locking sections
for some of the console takeover and unbind paths, but not all:
- console binding/unbinding from the console layer never with
lock_fb_info
- unbind (as opposed to unlink) never bother with lock_fb_info

Also the real serialization against set_par and set_pan are still
doing by wrapping the entire ioctl code in console_lock(). So this
shuffling shouldn't be worse than what we had from a "can you trigger
races?" pov, but it's at least clearer.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Claudio Suarez <cssk@net-c.es>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Du Cheng <ducheng2@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Zheyu Ma <zheyuma97@gmail.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405210335.3434130-13-daniel.vetter@ffwll.ch

fbcon: move more common code into fb_open()

No idea why con2fb_acquire_newinfo() initializes much less than
fbcon_startup(), but so be it. From a quick look most of the
un-initialized stuff should be fairly harmless, but who knows.

Note that the error handling for the con2fb_acquire_newinfo() failure
case was very strange: Callers updated con2fb_map to the new value
before calling this function, but upon error con2fb_acquire_newinfo
reset it to the old value. Since I removed the call to fbcon_release
anyway that strange error path was sticking out like a sore thumb,
hence I removed it. Which also allows us to remove the oldidx
parameter from that function.

v2: Explain what's going on with oldidx and error paths (Sam)

v3: Drop unused variable (0day)

v4: Rebased over bisect fix in previous patch, unchagend end result.

Acked-by: Sam Ravnborg <sam@ravnborg.org> (v2)
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Claudio Suarez <cssk@net-c.es>
Cc: Du Cheng <ducheng2@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405210335.3434130-12-daniel.vetter@ffwll.ch

fbcon: Ditch error handling for con2fb_release_oldinfo

It doesn't ever fail anymore.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Claudio Suarez <cssk@net-c.es>
Cc: Du Cheng <ducheng2@gmail.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405210335.3434130-11-daniel.vetter@ffwll.ch

fbcon: Extract fbcon_open/release helpers

There's two minor behaviour changes in here:
- in error paths we now consistently call fb_ops->fb_release
- fb_release really can't fail (fbmem.c ignores it too) and there's no
  reasonable cleanup we can do anyway.

Note that everything in fbcon.c is protected by the big console_lock()
lock (especially all the global variables), so the minor changes in
ordering of setup/cleanup do not matter.

v2: Explain a bit better why this is all correct (Sam)

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Claudio Suarez <cssk@net-c.es>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Du Cheng <ducheng2@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405210335.3434130-10-daniel.vetter@ffwll.ch

fb: Delete fb_info->queue

It was only used by fbcon, and that now switched to its own,
private work.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220405210335.3434130-9-daniel.vetter@ffwll.ch

fbcon: Replace FBCON_FLAGS_INIT with a boolean

It's only one flag and slightly tidier code.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Du Cheng <ducheng2@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Claudio Suarez <cssk@net-c.es>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405210335.3434130-8-daniel.vetter@ffwll.ch

fbcon: Use delayed work for cursor

Allows us to delete a bunch of hand-rolled stuff using a timer plus a
separate work). Also to simplify the code we initialize the
cursor_work completely when we allocate the fbcon_ops structure,
instead of trying to cope with console re-initialization.

The motiviation here is that fbcon code stops using the fb_info.queue,
which helps with locking issues around cleanup and all that in a later
patch.

Also note that this allows us to ditch the hand-rolled work cleanup in
fbcon_exit - we already call fbcon_del_cursor_timer, which takes care
of everything. Plus this was racy anyway.

v2:
- Only INIT_DELAYED_WORK when kzalloc succeeded (Tetsuo)
- Explain that we replace both the timer and a work with the combined
  delayed_work (Javier)

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Claudio Suarez <cssk@net-c.es>
Cc: Du Cheng <ducheng2@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405210335.3434130-7-daniel.vetter@ffwll.ch

fbdev/sysfs: Fix locking

fb_set_var requires we hold the fb_info lock. Or at least this now
matches what the ioctl does ...

Note that ps3fb and sh_mobile_lcdcfb are busted in different ways here,
but I will not fix them up.

Also in practice this isn't a big deal, because really variable fbdev
state is actually protected by console_lock (because fbcon just
doesn't bother with lock_fb_info() at all), and lock_fb_info
protecting anything is really just a neat lie. But that's a much
bigger fish to fry.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Qing Wang <wangqing@vivo.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405210335.3434130-6-daniel.vetter@ffwll.ch

fbcon: delete delayed loading code

Before

commit 6104c37094e729f3d4ce65797002112735d49cd1
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Tue Aug 1 17:32:07 2017 +0200

    fbcon: Make fbcon a built-time depency for fbdev

it was possible to load fbcon and fbdev drivers in any order, which
means that fbcon init had to handle the case where fbdev drivers where
already registered.

This is no longer possible, hence delete that code.

Note that the exit case is a bit more complex and will be done in a
separate patch.

Since I had to audit the entire fbcon load code I also spotted a wrong
function name in a comment in fbcon_startup(), which this patch also
fixes.

v2: Explain why we also fix the comment (Sam)

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Claudio Suarez <cssk@net-c.es>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Du Cheng <ducheng2@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405210335.3434130-5-daniel.vetter@ffwll.ch

fbcon: Introduce wrapper for console->fb_info lookup

Half of it is protected by console_lock, but the other half is a lot
more awkward: Registration/deregistration of fbdev are serialized, but
we don't really clear out anything in con2fb_map and so there's
potential for use-after free mixups.

First step is to encapsulate the lookup.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Du Cheng <ducheng2@gmail.com>
Cc: Claudio Suarez <cssk@net-c.es>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405210335.3434130-4-daniel.vetter@ffwll.ch

fbcon: Move fbcon_bmove(_rec) functions

Avoids two forward declarations, and more importantly, matches what
I've done in my fbcon scrolling restore patches - so I need this to
avoid a bunch of conflicts in rebasing since we ended up merging
Helge's series instead.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Du Cheng <ducheng2@gmail.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Claudio Suarez <cssk@net-c.es>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405210335.3434130-3-daniel.vetter@ffwll.ch

fbcon: delete a few unneeded forward decl

I didn't bother with any code movement to fix the others, these just
got a bit in the way.

v2: Rebase on top of Helge's reverts.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org> (v1)
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Du Cheng <ducheng2@gmail.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Claudio Suarez <cssk@net-c.es>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405210335.3434130-2-daniel.vetter@ffwll.ch

drm/vc4: Use newer fence API properly to fix build errors

The commit 73511edf8b19 ("dma-buf: specify usage while adding fences to
dma_resv obj v7") ported all the DRM drivers to use the newer fence API
that specifies the usage with the enum dma_resv_usage rather than doing
an explicit shared / exclusive distinction.

But the commit didn't do it properly in two callers of the vc4 driver,
leading to build errors.

Fixes: 73511edf8b19 ("dma-buf: specify usage while adding fences to dma_resv obj v7")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407131950.915091-1-javierm@redhat.com

drm/ssd130x: Add support for SINO WEALTH SH1106

The SINO WEALTH SH1106 is an OLED display driver that is somewhat
compatible with the SSD1306. It supports a slightly wider display,
at 132 instead of 128 pixels. The basic commands are the same, but
the SH1106 doesn't support the horizontal or vertical address modes.

Add support for this display driver. The default values for some of
the hardware settings are taken from the datasheet.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406172956.3953-5-wens@kernel.org

drm/ssd130x: Support page addressing mode

On the SINO WEALTH SH1106, which is mostly compatible with the SSD1306,
only the basic page addressing mode is supported. This addressing mode
is not as easy to use compared to the currently supported horizontal
addressing mode, as the page address has to be set prior to writing
out each page, and each page must be written out separately as a result.
Also, there is no way to force the column address to wrap around early,
thus the column address must also be reset for each page to be accurate.

Add support for this addressing mode, with a flag to choose it. This
flag is designed to be set from the device info data structure, but
can be extended to be explicitly forced on through a device tree
property if such a need arises.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406172956.3953-4-wens@kernel.org

dt-bindings: display: ssd1307fb: Add entry for SINO WEALTH SH1106

The SINO WEALTH SH1106 is an OLED display driver that is somewhat
compatible with the SSD1306. It supports a slightly wider display,
at 132 instead of 128 pixels. The basic commands are the same, but
the SH1106 doesn't support the horizontal or vertical address modes.

Add a compatible string for it.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406172956.3953-3-wens@kernel.org

dt-bindings: vendor-prefixes: Add prefix for SINO WEALTH Eletronics Ltd.

Add a vendor prefix entry for SINO WEALTH Eletronics Ltd.
(http://www.sinowealth.com).

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406172956.3953-2-wens@kernel.org

futex: add missing rtmutex.h include

This isn't included here any more since the removal of ww_mutex.h from
seqlock.h which causes a build break.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Shashank Sharma <shashank.sharma@amd.com>
Fixes: e84815cbbc76 ("seqlock: drop seqcount_ww_mutex_t")
Link: https://patchwork.freedesktop.org/patch/msgid/20220407114619.961750-1-christian.koenig@amd.com

seqlock: drop seqcount_ww_mutex_t

Daniel pointed out that this series removes the last user of
seqcount_ww_mutex_t, so let's drop this.

Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: linux-kernel@vger.kernel.org
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-16-christian.koenig@amd.com

dma-buf: drop seq count based update

This should be possible now since we don't have the distinction
between exclusive and shared fences any more.

The only possible pitfall is that a dma_fence would be reused during the
RCU grace period, but even that could be handled with a single extra check.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-15-christian.koenig@amd.com

drm/ttm: remove bo->moving

This is now handled by the DMA-buf framework in the dma_resv obj.

Also remove the workaround inside VMWGFX to update the moving fence.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-14-christian.koenig@amd.com

drm/i915: drop bo->moving dependency

That should now be handled by the common dma_resv framework.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-13-christian.koenig@amd.com

dma-buf: wait for map to complete for static attachments

We have previously done that in the individual drivers but it is
more defensive to move that into the common code.

Dynamic attachments should wait for map operations to complete by themselves.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-12-christian.koenig@amd.com

dma-buf: add DMA_RESV_USAGE_BOOKKEEP v3

Add an usage for submissions independent of implicit sync but still
interesting for memory management.

v2: cleanup the kerneldoc a bit
v3: separate amdgpu changes from this

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-10-christian.koenig@amd.com

RDMA: use DMA_RESV_USAGE_KERNEL

We only need to wait for kernel submissions here.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-9-christian.koenig@amd.com

drm/radeon: use DMA_RESV_USAGE_KERNEL

Always wait for kernel fences before kmap and not only for UVD kmaps.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-7-christian.koenig@amd.com

drm/amdgpu: use DMA_RESV_USAGE_KERNEL

Wait only for kernel fences before kmap or UVD direct submission.

This also makes sure that we always wait in amdgpu_bo_kmap() even when
returning a cached pointer.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-6-christian.koenig@amd.com

dma-buf: add DMA_RESV_USAGE_KERNEL v3

Add an usage for kernel submissions. Waiting for those are mandatory for
dynamic DMA-bufs.

As a precaution this patch also changes all occurrences where fences are
added as part of memory management in TTM, VMWGFX and i915 to use the
new value because it now becomes possible for drivers to ignore fences
with the WRITE usage.

v2: use "must" in documentation, fix whitespaces
v3: separate out some driver changes and better document why some
    changes should still be part of this patch.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-5-christian.koenig@amd.com

dma-buf & drm/amdgpu: remove dma_resv workaround

Rework the internals of the dma_resv object to allow adding more than one
write fence and remember for each fence what purpose it had.

This allows removing the workaround from amdgpu which used a container for
this instead.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-4-christian.koenig@amd.com

dma-buf: specify usage while adding fences to dma_resv obj v7

Instead of distingting between shared and exclusive fences specify
the fence usage while adding fences.

Rework all drivers to use this interface instead and deprecate the old one.

v2: some kerneldoc comments suggested by Daniel
v3: fix a missing case in radeon
v4: rebase on nouveau changes, fix lockdep and temporary disable warning
v5: more documentation updates
v6: separate internal dma_resv changes from this patch, avoids to
    disable warning temporary, rebase on upstream changes
v7: fix missed case in lima driver, minimize changes to i915_gem_busy_ioctl

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-3-christian.koenig@amd.com

dma-buf: add enum dma_resv_usage v4

This change adds the dma_resv_usage enum and allows us to specify why a
dma_resv object is queried for its containing fences.

Additional to that a dma_resv_usage_rw() helper function is added to aid
retrieving the fences for a read or write userspace submission.

This is then deployed to the different query functions of the dma_resv
object and all of their users. When the write paratermer was previously
true we now use DMA_RESV_USAGE_WRITE and DMA_RESV_USAGE_READ otherwise.

v2: add KERNEL/OTHER in separate patch
v3: some kerneldoc suggestions by Daniel
v4: some more kerneldoc suggestions by Daniel, fix missing cases lost in
    the rebase pointed out by Bas.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-2-christian.koenig@amd.com

drm/sti: fix typos in comments

Various spelling mistakes in comments.
Detected with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220314115354.144023-17-Julia.Lawall@inria.fr

drm: sti: fix spelling mistake: rejec -> rejection

In other places of the driver the string hdmi_rejection_pll is
used instead of the truncated hdmi_rejec_pll, so use this string
instead to be consistent.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004082706.26478-1-colin.king@canonical.com

drm: sti: don't use kernel-doc markers

Don't mark static functions as kernel-doc.

Prevents multiple kernel-doc build warnings:

drivers/gpu/drm/sti/sti_hdmi.c:187: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * HDMI interrupt handler threaded
drivers/gpu/drm/sti/sti_hdmi.c:219: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * HDMI interrupt handler
drivers/gpu/drm/sti/sti_hdmi.c:241: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Set hdmi active area depending on the drm display mode selected
drivers/gpu/drm/sti/sti_hdmi.c:262: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Overall hdmi configuration
drivers/gpu/drm/sti/sti_hdmi.c:340: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Helper to concatenate infoframe in 32 bits word
drivers/gpu/drm/sti/sti_hdmi.c:357: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Helper to write info frame
drivers/gpu/drm/sti/sti_hdmi.c:427: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Prepare and configure the AVI infoframe
drivers/gpu/drm/sti/sti_hdmi.c:470: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Prepare and configure the AUDIO infoframe
drivers/gpu/drm/sti/sti_hdmi.c:555: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Software reset of the hdmi subsystem

Fixes: 5402626c83a2 ("drm: sti: add HDMI driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Aditya Srivastava <yashsri421@gmail.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Alain Volmat <alain.volmat@foss.st.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220326235132.25192-1-rdunlap@infradead.org

stm: ltdc: fix two incorrect NULL checks on list iterator

The two bugs are here:
if (encoder) {
if (bridge && bridge->timings)

The list iterator value 'encoder/bridge' will *always* be set and
non-NULL by drm_for_each_encoder()/list_for_each_entry(), so it is
incorrect to assume that the iterator value will be NULL if the
list is empty or no element is found.

To fix the bug, use a new variable '*_iter' as the list iterator,
while use the old variable 'encoder/bridge' as a dedicated pointer
to point to the found element.

Cc: stable@vger.kernel.org
Fixes: 99e360442f223 ("drm/stm: Fix bus_flags handling")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Acked-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220327055355.3808-1-xiam0nd.tong@gmail.com

dma-buf/drivers: make reserving a shared slot mandatory v4

Audit all the users of dma_resv_add_excl_fence() and make sure they
reserve a shared slot also when only trying to add an exclusive fence.

This is the next step towards handling the exclusive fence like a
shared one.

v2: fix missed case in amdgpu
v3: and two more radeon, rename function
v4: add one more case to TTM, fix i915 after rebase

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406075132.3263-2-christian.koenig@amd.com

drm/drm_modeset_helper_vtables.h: fix a typo

 change upate to update

Signed-off-by: Sui Jingfeng <15330273260@189.cn>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406073036.276288-1-15330273260@189.cn

drm/vc4: hvs: Use pointer to HVS in HVS_READ and HVS_WRITE macros

Those macros are really about the HVS itself, and thus its associated
structure vc4_hvs, rather than the entire (virtual) vc4 device.

Let's change those macros to use the hvs pointer directly, and change
the calling sites accordingly.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220331143744.777652-8-maxime@cerno.tech

drm/vc4: kms: Ignore atomic_flush if we're disabled

atomic_flush will be called for each CRTC even if they aren't enabled.

The whole code we have there will thus run without a properly affected
channel, which can then result in all sorts of weird behaviour.

Fortunately, the DRM_PLANE_COMMIT_ACTIVE_ONLY flag will skip the CRTC
atomic_begin and atomic_flush, and the planes atomic_update, if they
aren't enabled.

Our plane atomic_update is a nop, and atomic_begin will copy the current
HVS channel to the vc4_crtc structure for the interrupt handler to
consume, but the handler won't run if the CRTC is disabled. So in the
end, it will only skip our CRTC atomic_flush, which is what we want.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220331143744.777652-7-maxime@cerno.tech

drm/vc4: hvs: Move the dlist setup to its own function

The vc4_hvs_update_dlist function mostly deals with setting up the
vblank events and setting up the dlist entry pointer to our current
active one.

We'll want to do the former separately from the vblank handling in later
patches, so let's move it to a function of its own.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220331143744.777652-6-maxime@cerno.tech

drm/vc4: hvs: Remove dlist setup duplication

Setting the DISPLISTx register needs to occur in every case, and we
don't need to protect the register using the event_lock, so we can just
move it after the if branches and simplify a bit the function.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220331143744.777652-5-maxime@cerno.tech

drm/vc4: hvs: Store channel in variable

The assigned_channel field of our vc4_crtc_state structure is accessed
multiple times in vc4_hvs_atomic_flush, so let's move it to a variable
that can be used in all those places.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220331143744.777652-4-maxime@cerno.tech

drm/vc4: hvs: Fix frame count register readout

In order to get the field currently being output, the driver has been
using the display FIFO frame count in the HVS, reading a 6-bit field at
the offset 12 in the DISPSTATx register.

While that field is indeed at that location for the FIFO 1 and 2, the
one for the FIFO0 is actually in the DISPSTAT1 register, at the offset
18.

Fixes: e538092cb15c ("drm/vc4: Enable precise vblank timestamping for interlaced modes.")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220331143744.777652-3-maxime@cerno.tech

drm/vc4: kms: Take old state core clock rate into account

During a commit, the core clock, which feeds the HVS, needs to run at
a minimum of 500MHz.

While doing that commit, we can also change the mode to one that
requires a higher core clock, so we take the core clock rate associated
to that new state into account for that boost.

However, the old state also needs to be taken into account if it
requires a core clock higher that the new one and our 500MHz limit,
since it's still live in hardware at the beginning of our commit.

Fixes: 16e101051f32 ("drm/vc4: Increase the core clock based on HVS load")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220331143744.777652-2-maxime@cerno.tech

drm/vc4: hdmi: Remove clock rate initialization

Now that the clock driver makes sure we never end up with a rate of 0,
the HDMI driver doesn't need to care anymore.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220225143534.405820-13-maxime@cerno.tech

drm/vc4: Add logging and comments

The HVS core clock isn't really obvious, so let's add a bunch more
comments and some logging for easier debugging.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220225143534.405820-12-maxime@cerno.tech

drm: bridge: icn6211: Drop I2C module owner assignment

The module owner = THIS_MODULE is set by I2C core, drop duplicate assignment.

Fixes: 8dde6f7452a1 ("drm: bridge: icn6211: Add I2C configuration support")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220401113317.7033-1-marex@denx.de

drm/gma500: fix a missing break in psb_intel_crtc_mode_set

Instead of exiting the loop as expected when an entry is found, the
list_for_each_entry() continues until the traversal is complete.
when found the entry, add a break after the switch statement.

Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220401115018.9335-1-xiam0nd.tong@gmail.com

drm: bridge: icn6211: Mark module exit callback with __exit

Fix copy-paste error, module exit function should be marked with __exit
instead of __init.

Fixes: 8dde6f7452a1 ("drm: bridge: icn6211: Add I2C configuration support")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406014250.902187-1-marex@denx.de
Reviewed-by: Robert Foss <robert.foss@linaro.org>

drm: bridge: icn6211: Fix DSI-to-DPI PLL configuration

The datasheet for this bridge is not available, the PLL behavior has been
inferred from [1] and [2] and by analyzing the DPI pixel clock with scope.
After further testing with other displays and different DSI data lane count,
it turns out the P-factor is not 1/2^N divider, but rather only 1/N divider.
It also turns out the input into the PLL seem to be ByteClock instead of DSI
HS clock.

Rework the P-factor calculation such that the PLL calculation code handles
P-factor from 1..32 with P-factors above 16 must be even. In case P-factor
is even, enable built-in 1:2 divider and program P-factor/2 to PLL_REF_DIV,
otherwise configure only the P-factor into PLL_REF_DIV register.

Switch the PLL factor calculation from kHz to Hz to maintain precision.

[1] https://github.com/rockchip-linux/kernel/blob/develop-4.19/drivers/gpu/drm/bridge/icn6211.c
[2] https://github.com/tdjastrzebski/ICN6211-Configurator

Fixes: f30cf0ece691 ("drm: bridge: icn6211: Add generic DSI-to-DPI PLL configuration")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220402004118.897014-1-marex@denx.de

drm/panel: innolux-ej030na and abt-y030xx067a: add .enable and .disable

Following the introduction of bridge_atomic_enable in the ingenic
drm driver, the crtc is enabled between .prepare and .enable, if
it exists. Add it so the backlight is only enabled after the crtc is, to
avoid graphical issues.

As we're moving the "sleep out" command out of the init sequence
into .enable for the ABT, we need to switch the regmap cache
to REGCACHE_FLAT to be able to use regmap_set_bits, given this
panel registers are write-ony and read as 0.

Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
[pcercuei: Remove empty line after opening brace]
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321133651.291592-4-cbranchereau@gmail.com

drm/panel: Add panel driver for NewVision NV3052C based LCDs

This driver supports the NewVision NV3052C based LCDs. Right now, it
only supports the LeadTek LTK035C5444T 2.4" 640x480 TFT LCD panel, which
can be found in the Anbernic RG-350M handheld console.

Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
[pcercuei: Change msleep(5) to usleep_range(5000, 20000)]
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321133651.291592-3-cbranchereau@gmail.com

drm/ingenic: Add ingenic_drm_bridge_atomic_enable and disable

ingenic_drm_bridge_atomic_enable allows the CRTC to be enabled after
panels have slept out, and before their display is turned on, solving
a graphical bug on the newvision nv3502c.

Also add ingenic_drm_bridge_atomic_disable to balance it out.

Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Artur Rojek <contact@artur-rojek.eu>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321133651.291592-2-cbranchereau@gmail.com

drm/nouveau: support more than one write fence in fenv50_wndw_prepare_fb

Use dma_resv_get_singleton() here to eventually get more than one write
fence as single fence.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Lyude Paul <lyude@redhat.com>
Cc: nouveau@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-14-christian.koenig@amd.com

Merge drm/drm-next into drm-misc-next

Let's start the 5.19 development cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>