OSDN Git Service
José Fonseca [Sun, 30 May 2010 15:38:23 +0000 (16:38 +0100)]
llvmpipe: Use pointer_to_func() instead of custom wrappers.
José Fonseca [Sun, 30 May 2010 15:38:03 +0000 (16:38 +0100)]
draw: Use pointer_to_func() instead of custom wrappers.
José Fonseca [Sun, 30 May 2010 15:36:08 +0000 (16:36 +0100)]
util: Generic pointer to func conversion helper.
That observes strict-aliasing rules.
José Fonseca [Wed, 26 May 2010 14:11:17 +0000 (15:11 +0100)]
llvmpipe: Pass the fs variant to the rasterizer.
José Fonseca [Sat, 29 May 2010 13:57:52 +0000 (14:57 +0100)]
python/retrace: Interpret resource_copy_region.
José Fonseca [Sat, 29 May 2010 13:57:35 +0000 (14:57 +0100)]
st/python: Expose region_copy/fill_region instead of deprecated surface_copy/fill
Chia-I Wu [Fri, 28 May 2010 05:07:34 +0000 (13:07 +0800)]
st/vega: Use FREE.
Match MALLOC with FREE. Otherwise, it causes weird segfaults when built
with memory debugging.
Chia-I Wu [Sun, 30 May 2010 02:58:06 +0000 (10:58 +0800)]
st/egl: Hook eglCreatePbufferFromClientBuffer.
This is some refactoring works. Creating a pbuffer from an
EGL_OPENVG_IMAGE is still not supported.
Chia-I Wu [Sun, 30 May 2010 03:01:21 +0000 (11:01 +0800)]
st/egl: Fix eglCopyBuffers.
It was broken since surface_copy -> resource_copy_region transition.
Chia-I Wu [Sun, 30 May 2010 02:21:09 +0000 (10:21 +0800)]
st/egl: Initialize KMS backend from an fd.
Check if the native native is EGL_DEFAULT_DISPLAY. If not, treat it as
an fd.
Marek Olšák [Sat, 29 May 2010 15:39:51 +0000 (17:39 +0200)]
r300: fix blits for textures of width/height greater than 2048 on r5xx
Yes I am fixing r300c ... who knew?
Marek Olšák [Sat, 29 May 2010 13:40:23 +0000 (15:40 +0200)]
r600g: remove unused variable
Marek Olšák [Sat, 29 May 2010 13:39:51 +0000 (15:39 +0200)]
r600g: fix gallium function parameters
Marek Olšák [Sat, 29 May 2010 13:27:42 +0000 (15:27 +0200)]
r600g: make a local copy of viewport state
Jakob Bornecrantz [Sat, 29 May 2010 11:31:30 +0000 (13:31 +0200)]
i915g: Rename winsys c file
Jakob Bornecrantz [Sat, 29 May 2010 11:29:44 +0000 (13:29 +0200)]
i915g: Move pci id to winsys struct
Jakob Bornecrantz [Sat, 29 May 2010 09:39:52 +0000 (11:39 +0200)]
targets/egl: Give egl targets a good build enviroment
Kristian Høgsberg [Fri, 28 May 2010 20:16:12 +0000 (16:16 -0400)]
egl_dri2: Split driver loading out into its own function
Kristian Høgsberg [Fri, 28 May 2010 19:50:11 +0000 (15:50 -0400)]
egl_dri2: Check for xcb_connect() failure the right way
It always returns a valid xcb_connection_t, but if connection failed, it's in the
error state.
Marek Olšák [Sat, 29 May 2010 00:30:52 +0000 (02:30 +0200)]
r600g: fix build
Eric Anholt [Fri, 28 May 2010 19:50:55 +0000 (12:50 -0700)]
i965: Add cache unit -> bo name mapping for more gen6 state objects.
This will help in bufmgr debugging and aub dumping.
Zou Nan hai [Tue, 18 May 2010 08:22:40 +0000 (16:22 +0800)]
i965: fix PIPE_CONTROL command for gen6.
Signed-off-by: Zou Nan hai <nanhai.zou@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Brian Paul [Fri, 28 May 2010 19:31:23 +0000 (13:31 -0600)]
llvmpipe: add PIPE_BUFFER to assertion
Fixes regression from commit
f2e05acac931889e0820e1cc5d7ea810048a6b5f.
Brian Paul [Fri, 28 May 2010 19:30:21 +0000 (13:30 -0600)]
softpipe: add PIPE_BUFFER to assertion
Fixes regression from commit
f2e05acac931889e0820e1cc5d7ea810048a6b5f.
Brian Paul [Fri, 28 May 2010 18:49:49 +0000 (12:49 -0600)]
llvmpipe: add out of memory checking to triangle setup path
Brian Paul [Fri, 28 May 2010 18:52:34 +0000 (12:52 -0600)]
glsl: change uniform location/offset encoding
This lets Mesa work like other OpenGL implementations with regard
to indexing uniform arrays. See comments for details.
Note: this is a candidate for the 7.8 branch.
Marek Olšák [Fri, 28 May 2010 00:57:32 +0000 (02:57 +0200)]
r300g: remove unnecessary breaks
Marek Olšák [Fri, 28 May 2010 00:53:47 +0000 (02:53 +0200)]
r300g: report vertex format support in is_format_supported
Marek Olšák [Tue, 25 May 2010 23:54:58 +0000 (01:54 +0200)]
st/mesa: advertise ARB_half_float_vertex when available
Both softpipe and llvmpipe pass the piglit half float test.
Marek Olšák [Thu, 27 May 2010 23:39:27 +0000 (01:39 +0200)]
r300g/swtcl: fix WPOS
There you are! r300->viewport_state is undefined when using SW TCL.
Piglit score (r300g.tests):
HW TCL: 231/275
SW TCL: 233/275
Marek Olšák [Thu, 27 May 2010 22:04:05 +0000 (00:04 +0200)]
r300g/swtcl: avoid an infinite loop if an occl. query doesn't return anything
Jerome Glisse [Thu, 27 May 2010 21:21:12 +0000 (23:21 +0200)]
r600g: disable rendering
Disable rendering to avoid GPU lockup.
Use radeondb to debug shader compiler :
radeondb -c gallium.bof
radeondb -s gallium.json
Will print shader generated, best is to use fp demos to test
the compiler.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Bas Nieuwenhuizen [Wed, 19 May 2010 16:46:45 +0000 (18:46 +0200)]
r600g: various fixes
- enabled flushing a buffer more than once
- enabled the blitter for r600_clear
- added some more colors to r600_is_format_supported (copied from r600_conv_pipe_format)
- r600_set_framebuffer_state now sets rctx->fb_state
- more states are saved before a blit (had to add some accounting for the viewport and the vertex elements state)
- fixed a few errors with reference counting
Jerome Glisse [Thu, 27 May 2010 20:55:18 +0000 (22:55 +0200)]
r600g: fix driver + shader compiler backend change
Change the way we translate from c_compiler to the
asic specific representation. Should make things
simpler.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Jakob Bornecrantz [Thu, 13 May 2010 19:29:18 +0000 (20:29 +0100)]
r600g: Integrate into build
Signed-off-by: Jakob Bornecrantz <wallbraker@gmail.com>
Jakob Bornecrantz [Thu, 13 May 2010 19:27:19 +0000 (20:27 +0100)]
r600g: Fix buffer offsets
Signed-off-by: Jakob Bornecrantz <wallbraker@gmail.com>
Marek Olšák [Mon, 10 May 2010 01:27:58 +0000 (03:27 +0200)]
r600g: adapt to latest interfaces changes
- Wrapped the buffer and texture create/destroy/transfer/... functions
using u_resource, which is then used to implement the resource functions.
- Implemented texture transfers.
I left the buffer and texture transfers separate because one day we'll
need a special codepath for textures.
- Added index_bias to the draw_*elements functions.
- Removed nonexistent *REP and *FOR instructions.
- Some pipe formats have changed channel ordering, so I've removed/fixed
nonexistent ones.
- Added stubs for create/set/destroy sampler views.
- Added a naive implementation of vertex elements state (new CSO).
- Reworked {texture,buffer}_{from,to}_handle.
- Reorganized winsys files, removed dri,egl,python directories.
- Added a new build target dri-r600.
Jerome Glisse [Sat, 8 May 2010 20:09:24 +0000 (21:09 +0100)]
r600g: Initial import
Brian Paul [Thu, 27 May 2010 20:55:58 +0000 (14:55 -0600)]
llvmpipe: s/bool/boolean/
Brian Paul [Thu, 27 May 2010 20:54:21 +0000 (14:54 -0600)]
llvmpipe: s/bool/boolean
Brian Paul [Thu, 27 May 2010 18:30:45 +0000 (12:30 -0600)]
sw/xlib: avoid dereferencing a null pointer
Brian Paul [Thu, 20 May 2010 18:42:40 +0000 (12:42 -0600)]
gallivm: add assertions to check type of phi variables
Brian Paul [Thu, 27 May 2010 19:05:23 +0000 (13:05 -0600)]
mesa: fix incorrect GL_DEPTH_STENCIL_ATTACHMENT format check
We want to check the incoming renderbuffer format, not the (potentially
non-existant) current attachment.
Fixes segfault w/ fbotexture -ds2.
NOTE: this will be applied to the 7.8 branch too.
Marek Olšák [Thu, 27 May 2010 17:11:56 +0000 (19:11 +0200)]
r300g/swtcl: fix secondary color and back-face color outputs
These piglit tests have been fixed:
- bgra-sec-color-pointer
- glsl-routing
See comments at the beginning of r300_vs_draw.c
WPOS is implemented too but it doesn't work yet. I'm still working on it.
José Fonseca [Thu, 27 May 2010 18:40:10 +0000 (19:40 +0100)]
llvmpipe: Refer to my personal udis86 repository.
As it has a bunch of fixes/additions not merged by upstream yet.
José Fonseca [Thu, 27 May 2010 18:29:18 +0000 (19:29 +0100)]
util: Also add a define for the dynamic library's prefix.
Brian Paul [Thu, 27 May 2010 18:04:43 +0000 (12:04 -0600)]
egl/mks: remove extra param from function call
Brian Paul [Thu, 27 May 2010 18:04:08 +0000 (12:04 -0600)]
egl_g3d: add missing param to egl_g3d_st_manager_get_egl_image()
Brian Paul [Thu, 27 May 2010 15:45:29 +0000 (09:45 -0600)]
fbdev: some hacking to get the driver to compile (untested)
Brian Paul [Thu, 27 May 2010 15:39:59 +0000 (09:39 -0600)]
update linux-fbdev config
Brian Paul [Thu, 27 May 2010 15:30:55 +0000 (09:30 -0600)]
vbo: comments and whitespace
Brian Paul [Thu, 27 May 2010 15:30:43 +0000 (09:30 -0600)]
vbo: remove unused prototype
Brian Paul [Thu, 27 May 2010 15:25:07 +0000 (09:25 -0600)]
vbo: remove dead code
Brian Paul [Thu, 27 May 2010 15:24:43 +0000 (09:24 -0600)]
vbo: update/add comments
Vinson Lee [Thu, 27 May 2010 15:10:31 +0000 (08:10 -0700)]
mesa: Remove unnecessary headers.
Kristian Høgsberg [Thu, 27 May 2010 01:33:18 +0000 (21:33 -0400)]
egl: Return NULL if we fail to load a default driver
Brian Paul [Thu, 27 May 2010 04:42:13 +0000 (22:42 -0600)]
mesa: remove unused includes
Brian Paul [Thu, 27 May 2010 04:40:38 +0000 (22:40 -0600)]
mesa: rewrite _mesa_get_handle() and add some comments
Brian Paul [Thu, 27 May 2010 04:24:58 +0000 (22:24 -0600)]
mesa: move GLSL uniform functions into new source file
Vinson Lee [Thu, 27 May 2010 03:12:33 +0000 (20:12 -0700)]
st/mesa: Remove unnecessary headers.
Will Dyson [Tue, 25 May 2010 05:10:21 +0000 (01:10 -0400)]
Enable hardware mipmap generation for radeon.
Use _mesa_meta_GenerateMipmap. It is Fast Enough(tm).
Signed-off-by: Maciej Cencora <m.cencora@gmail.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Will Dyson [Tue, 25 May 2010 05:10:20 +0000 (01:10 -0400)]
Fix image_matches_texture_obj() MaxLevel check
When generating or uploading a new (higher) mipmap level for an image,
we can need to allocate a miptree for a level greater than
texObj->MaxLevel.
Signed-off-by: Maciej Cencora <m.cencora@gmail.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Will Dyson [Tue, 25 May 2010 05:10:19 +0000 (01:10 -0400)]
Fallback to software render if there is no miptree for an image
This can happen when checking if a software fallback for a higher level
operation (such as GenerateMipmap) is needed.
Signed-off-by: Maciej Cencora <m.cencora@gmail.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Marek Olšák [Wed, 26 May 2010 21:47:27 +0000 (23:47 +0200)]
r300g: decouple drawing code and two-sided stencil refvalue fallback
It's now more separate from the rest of the driver and it can be disabled
by commenting out just 1 line. Well, I couldn't make the previous version
work with SW TCL reliably, that's the reason of this little rework.
Marek Olšák [Wed, 26 May 2010 20:21:21 +0000 (22:21 +0200)]
r300g/swtcl: handle large index count properly
This fixes piglit/draw-elements.
Marek Olšák [Wed, 26 May 2010 18:59:46 +0000 (20:59 +0200)]
r300g/swtcl: force vertex prefetching for non-indexed primitives
Marek Olšák [Wed, 26 May 2010 18:53:56 +0000 (20:53 +0200)]
r300g/swtcl: move emitting AOS to prepare_for_rendering
Marek Olšák [Wed, 26 May 2010 17:36:21 +0000 (19:36 +0200)]
r300g/swtcl: vbo transfer sanity checks
Marek Olšák [Wed, 26 May 2010 17:29:58 +0000 (19:29 +0200)]
r300g: add get_cs_info winsys entrypoint, abandon check_cs
Marek Olšák [Wed, 26 May 2010 16:21:59 +0000 (18:21 +0200)]
r300g/swtcl: do not use u_upload_mgr and do not compute max_index
Marek Olšák [Wed, 26 May 2010 15:56:13 +0000 (17:56 +0200)]
r300g: remove unnecessary includes
Eric Anholt [Tue, 25 May 2010 22:32:54 +0000 (15:32 -0700)]
i965: Add support for EXT_timer_query on Ironlake.
We could potentially do this on G45 as well, though the units are
different. On 965, the timestamp is tied to hclk, which would make
supporting it harder.
Eric Anholt [Tue, 25 May 2010 21:48:34 +0000 (14:48 -0700)]
intel: Handle decode of PIPE_CONTROL instructions.
Eric Anholt [Mon, 24 May 2010 04:12:56 +0000 (21:12 -0700)]
i965: Move Gen6 debugging emit_mi_flush into the Gen6 block.
Eric Anholt [Mon, 24 May 2010 04:00:13 +0000 (21:00 -0700)]
i965: Don't PIPE_CONTROL instruction cache flush.
This is a workaround for Ironlake errata. The emit_mi_flush is used
for a few purposes:
1) Flushing write caches for RTT (including blit to texture)
2) Pipe fencing for sync objects
3) Spamming cache flushes to track down cache flush bugs
Spamming cache flushes seems less important than following the docs,
and we should probably do that with a different mechanism than the one
for render cache flushes.
Eric Anholt [Mon, 24 May 2010 03:25:02 +0000 (20:25 -0700)]
i965: Emit MI_FLUSH before PSP on Ironlake for clip max threads errata.
Vinson Lee [Wed, 26 May 2010 18:13:23 +0000 (11:13 -0700)]
gallivm: Remove unnecessary headers.
Vinson Lee [Wed, 26 May 2010 17:59:57 +0000 (10:59 -0700)]
st/xorg: Remove unnecessary headers.
Vinson Lee [Wed, 26 May 2010 17:53:54 +0000 (10:53 -0700)]
util: Remove unnecessary headers.
Vinson Lee [Wed, 26 May 2010 17:24:36 +0000 (10:24 -0700)]
st/dri: Remove dri.c from SCons build.
This was missed in commit
f501230db3a94c9328b8e769d9c17b2c3792e19c.
Fixes SCons build.
Kristian Høgsberg [Wed, 26 May 2010 15:32:36 +0000 (11:32 -0400)]
Revert the 'make static' part of
962f92611216e304c95e7c089b38d58066236014
The es1 and es2 dispath table initialization code is generated from the
API XML files and we can't easily share the dispatch table code setup.
Keep the _mesa_init_shader_dispatch() part of the patch, but roll back
the static-ization of shader entrypoints so es1 and es2 dispatch
initialization still works.
Marek Olšák [Wed, 26 May 2010 14:39:14 +0000 (16:39 +0200)]
r300g: fix fence referencing
Brian Paul [Wed, 26 May 2010 03:42:13 +0000 (21:42 -0600)]
mesa: move all vertex array functions into varray.c
Brian Paul [Wed, 26 May 2010 03:13:06 +0000 (21:13 -0600)]
mesa: added _mesa_GetVertexAttribIiv / AttribIuiv()
Refactor the code for all the glGetVertexAttrib() functions.
Brian Paul [Wed, 26 May 2010 03:12:24 +0000 (21:12 -0600)]
mesa: added _mesa_VertexAttribIPointer()
Brian Paul [Wed, 26 May 2010 02:28:39 +0000 (20:28 -0600)]
mesa: new GL 3.0 VertexAttrib commands
Still need to plug in API dispatch...
Brian Paul [Wed, 26 May 2010 02:10:09 +0000 (20:10 -0600)]
mesa: make a bunch of shader API functions static
Brian Paul [Wed, 26 May 2010 01:20:32 +0000 (19:20 -0600)]
mesa: display list support for uint uniforms
Still need to plug into dispatcher...
Brian Paul [Wed, 26 May 2010 00:51:45 +0000 (18:51 -0600)]
mesa: consolidate some glUniform code
Brian Paul [Wed, 26 May 2010 00:40:09 +0000 (18:40 -0600)]
mesa: unsigned int uniform functions (GL3)
Brian Paul [Wed, 26 May 2010 00:39:47 +0000 (18:39 -0600)]
mesa: support for unsigned int uniforms
Marek Olšák [Wed, 26 May 2010 02:36:29 +0000 (04:36 +0200)]
r300/compiler: implement SGT+SLE opcodes
Reported-by: Gianluca Anzolin <gianluca@sottospazio.it>
Marek Olšák [Wed, 26 May 2010 02:20:18 +0000 (04:20 +0200)]
r300/compiler: fix dumping r5xx vertex shaders
Marek Olšák [Wed, 26 May 2010 02:18:27 +0000 (04:18 +0200)]
r300/compiler: move hardware caps to the radeon_compiler base struct
Needed for vertex shaders too.
Marek Olšák [Wed, 26 May 2010 01:24:00 +0000 (03:24 +0200)]
r300/compiler: shorten swizzle expressions
Dave Airlie [Wed, 26 May 2010 01:45:32 +0000 (11:45 +1000)]
rbug: add set sample mask passthrough.
This at least stops rbug segfaulting at startup.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Marek Olšák [Tue, 25 May 2010 23:41:22 +0000 (01:41 +0200)]
r300g: more efficient finish + fix comments
Marek Olšák [Tue, 25 May 2010 23:23:07 +0000 (01:23 +0200)]
r300g: implement fake but compliant fences
Marek Olšák [Tue, 25 May 2010 21:29:39 +0000 (23:29 +0200)]
r300g: add r300_init_render_functions, remove r300_render.h
Marek Olšák [Tue, 25 May 2010 21:23:41 +0000 (23:23 +0200)]
r300g: remove r300_query.h