cifs: integer overflow in in SMB2_ioctl()

commit 2d204ee9d671327915260071c19350d84344e096 upstream.

The "le32_to_cpu(rsp->OutputOffset) + *plen" addition can overflow and
wrap around to a smaller value which looks like it would lead to an
information leak.

Fixes: 4a72dafa19ba ("SMB2 FSCTL and IOCTL worker function")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CIFS: fix wrapping bugs in num_entries()

commit 56446f218af1133c802dad8e9e116f07f381846c upstream.

The problem is that "entryptr + next_offset" and "entryptr + len + size"
can wrap.  I ended up changing the type of "entryptr" because it makes
the math easier when we don't have to do so much casting.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: prevent integer overflow in nxt_dir_entry()

commit 8ad8aa353524d89fa2e09522f3078166ff78ec42 upstream.

The "old_entry + le32_to_cpu(pDirInfo->NextEntryOffset)" can wrap
around so I have added a check for integer overflow.

Reported-by: Dr Silvio Cesare of InfoSect <silvio.cesare@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "cdc-acm: implement put_char() and flush_chars()"

commit df3aa13c7bbb307e172c37f193f9a7aa058d4739 upstream.

This reverts commit a81cf9799ad7299b03a4dff020d9685f9ac5f3e0.

The patch causes a regression, which I cannot find the reason for.
So let's revert for now, as a revert hurts only performance.

Original report:
I was trying to resolve the problem with Oliver but we don't get any conclusion
for 5 months, so I am now sending this to mail list and cdc_acm authors.

I am using simple request-response protocol to obtain the boiller parameters
in constant intervals.

A simple one transaction is:
1. opening the /dev/ttyACM0
2. sending the following 10-bytes request to the device:
   unsigned char req[] = {0x02, 0xfe, 0x01, 0x05, 0x08, 0x02, 0x01, 0x69, 0xab, 0x03};
3. reading response (frame of 74 bytes length).
4. closing the descriptor
I am doing this transaction with 5 seconds intervals.

Before the bad commit everything was working correctly: I've got a requests and
a responses in a timely manner.

After the bad commit more time I am using the kernel module, more problems I have.
The graph [2] is showing the problem.

As you can see after module load all seems fine but after about 30 minutes I've got
a plenty of EAGAINs when doing read()'s and trying to read back the data.

When I rmmod and insmod the cdc_acm module again, then the situation is starting
over again: running ok shortly after load, and more time it is running, more EAGAINs
I have when calling read().

As a bonus I can see the problem on the device itself:
The device is configured as you can see here on this screen [3].
It has two transmision LEDs: TX and RX. Blink duration is set for 100ms.
This is a recording before the bad commit when all is working fine: [4]
And this is with the bad commit: [5]
As you can see the TX led is blinking wrongly long (indicating transmission?)
and I have problems doing read() calls (EAGAIN).

Reported-by: Mariusz Bialonczyk <manio@skyboo.net>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Fixes: a81cf9799ad7 ("cdc-acm: implement put_char() and flush_chars()")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()

commit 6e22e3af7bb3a7b9dc53cb4687659f6e63fca427 upstream.

wdm_in_callback() is a completion handler function for the USB driver.
So it should not sleep. But it calls service_outstanding_interrupt(),
which calls usb_submit_urb() with GFP_KERNEL.

To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC.

This bug is found by my static analysis tool DSAC.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: yurex: Fix buffer over-read in yurex_write()

commit 7e10f14ebface44a48275c8d6dc1caae3668d5a9 upstream.

If the written data starts with a digit, yurex_write() tries to parse
it as an integer using simple_strtoull().  This requires a null-
terminator, and currently there's no guarantee that there is one.

(The sample program at
https://github.com/NeoCat/YUREX-driver-for-Linux/blob/master/sample/yurex_clock.pl
writes an integer without a null terminator.  It seems like it must
have worked by chance!)

Always add a null byte after the written data.  Enlarge the buffer
to allow for this.

Cc: stable@vger.kernel.org
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ti_usb_3410_5052: fix array underflow in completion handler

commit 5dfdd24eb3d39d815bc952ae98128e967c9bba49 upstream.

Similarly to a recently reported bug in io_ti, a malicious USB device
could set port_number to a negative value and we would underflow the
port array in the interrupt completion handler.

As these devices only have one or two ports, fix this by making sure we
only consider the seventh bit when determining the port number (and
ignore bits 0xb0 which are typically set to 0x30).

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: misc: uss720: Fix two sleep-in-atomic-context bugs

commit bc8acc214d3f1cafebcbcd101a695bbac716595d upstream.

async_complete() in uss720.c is a completion handler function for the
USB driver. So it should not sleep, but it is can sleep according to the
function call paths (from bottom to top) in Linux-4.16.

[FUNC] set_1284_register(GFP_KERNEL)
drivers/usb/misc/uss720.c, 372:
  set_1284_register in parport_uss720_frob_control
drivers/parport/ieee1284.c, 560:
  [FUNC_PTR]parport_uss720_frob_control in parport_ieee1284_ack_data_avail
drivers/parport/ieee1284.c, 577:
  parport_ieee1284_ack_data_avail in parport_ieee1284_interrupt
./include/linux/parport.h, 474:
  parport_ieee1284_interrupt in parport_generic_irq
drivers/usb/misc/uss720.c, 116:
  parport_generic_irq in async_complete

[FUNC] get_1284_register(GFP_KERNEL)
drivers/usb/misc/uss720.c, 382:
  get_1284_register in parport_uss720_read_status
drivers/parport/ieee1284.c, 555:
  [FUNC_PTR]parport_uss720_read_status in parport_ieee1284_ack_data_avail
drivers/parport/ieee1284.c, 577:
  parport_ieee1284_ack_data_avail in parport_ieee1284_interrupt
./include/linux/parport.h, 474:
  parport_ieee1284_interrupt in parport_generic_irq
drivers/usb/misc/uss720.c, 116:
  parport_generic_irq in async_complete

Note that [FUNC_PTR] means a function pointer call is used.

To fix these bugs, GFP_KERNEL is replaced with GFP_ATOMIC.

These bugs are found by my static analysis tool DSAC.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: io_ti: fix array underflow in completion handler

commit 691a03cfe8ca483f9c48153b869d354e4ae3abef upstream.

As reported by Dan Carpenter, a malicious USB device could set
port_number to a negative value and we would underflow the port array in
the interrupt completion handler.

As these devices only have one or two ports, fix this by making sure we
only consider the seventh bit when determining the port number (and
ignore bits 0xb0 which are typically set to 0x30).

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: net2280: Fix erroneous synchronization change

commit dec3c23c9aa1815f07d98ae0375b4cbc10971e13 upstream.

Commit f16443a034c7 ("USB: gadgetfs, dummy-hcd, net2280: fix locking
for callbacks") was based on a serious misunderstanding.  It
introduced regressions into both the dummy-hcd and net2280 drivers.

The problem in dummy-hcd was fixed by commit 7dbd8f4cabd9 ("USB:
dummy-hcd: Fix erroneous synchronization change"), but the problem in
net2280 remains.  Namely: the ->disconnect(), ->suspend(), ->resume(),
and ->reset() callbacks must be invoked without the private lock held;
otherwise a deadlock will occur when the callback routine tries to
interact with the UDC driver.

This patch largely is a reversion of the relevant parts of
f16443a034c7.  It also drops the private lock around the calls to
->suspend() and ->resume() (something the earlier patch forgot to do).
This is safe from races with device interrupts because it occurs
within the interrupt handler.

Finally, the patch changes where the ->disconnect() callback is
invoked when net2280_pullup() turns the pullup off.  Rather than
making the callback from within stop_activity() at a time when dropping
the private lock could be unsafe, the callback is moved to a point
after the lock has already been dropped.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: f16443a034c7 ("USB: gadgetfs, dummy-hcd, net2280: fix locking for callbacks")
Reported-by: D. Ziesche <dziesche@zes.com>
Tested-by: D. Ziesche <dziesche@zes.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: udc: renesas_usb3: fix maxpacket size of ep0

commit dfe1a51d2a36647f74cbad478801efa7cf394376 upstream.

This patch fixes an issue that maxpacket size of ep0 is incorrect
for SuperSpeed. Otherwise, CDC NCM class with SuperSpeed doesn't
work correctly on this driver because its control read data size
is more than 64 bytes.

Reported-by: Junki Kato <junki.kato.xk@renesas.com>
Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Junki Kato <junki.kato.xk@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: add quirk for WORLDE Controller KS49 or Prodipe MIDI 49C USB controller

commit 9b83a1c301ad6d24988a128c69b42cbaaf537d82 upstream.

WORLDE Controller KS49 or Prodipe MIDI 49C USB controller
cause a -EPROTO error, a communication restart and loop again.

This issue has already been fixed for KS25.
https://lore.kernel.org/patchwork/patch/753077/

I just add device 201 for KS49 in quirks.c to get it works.

Signed-off-by: Laurent Roux <xpros64@hotmail.fr>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: u132-hcd: Fix a sleep-in-atomic-context bug in u132_get_frame()

commit 6d4f268fa132742fe96dad22307c68d237356d88 upstream.

i_usX2Y_subs_startup in usbusx2yaudio.c is a completion handler function
for the USB driver. So it should not sleep, but it is can sleep
according to the function call paths (from bottom to top) in Linux-4.16.

[FUNC] msleep
drivers/usb/host/u132-hcd.c, 2558:
msleep in u132_get_frame
drivers/usb/core/hcd.c, 2231:
[FUNC_PTR]u132_get_frame in usb_hcd_get_frame_number
drivers/usb/core/usb.c, 822:
usb_hcd_get_frame_number in usb_get_current_frame_number
sound/usb/usx2y/usbusx2yaudio.c, 303:
usb_get_current_frame_number in i_usX2Y_urb_complete
sound/usb/usx2y/usbusx2yaudio.c, 366:
i_usX2Y_urb_complete in i_usX2Y_subs_startup

Note that [FUNC_PTR] means a function pointer call is used.

To fix this bug, msleep() is replaced with mdelay().

This bug is found by my static analysis tool DSAC.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: Avoid use-after-free by flushing endpoints early in usb_set_interface()

commit f9a5b4f58b280c1d26255376713c132f93837621 upstream.

The steps taken by usb core to set a new interface is very different from
what is done on the xHC host side.

xHC hardware will do everything in one go. One command is used to set up
new endpoints, free old endpoints, check bandwidth, and run the new
endpoints.

All this is done by xHC when usb core asks the hcd to check for
available bandwidth. At this point usb core has not yet flushed the old
endpoints, which will cause use-after-free issues in xhci driver as
queued URBs are cancelled on a re-allocated endpoint.

To resolve this add a call to usb_disable_interface() which will flush
the endpoints before calling usb_hcd_alloc_bandwidth()

Additional checks in xhci driver will also be implemented to gracefully
handle stale URB cancel on freed and re-allocated endpoints

Cc: <stable@vger.kernel.org>
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: uas: add support for more quirk flags

commit 42d1c6d4a06a77b3ab206a919b9050c3080f3a71 upstream.

The hope that UAS devices would be less broken than old style storage
devices has turned out to be unfounded. Make UAS support more of the
quirk flags of the old driver.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: Add quirk to support DJI CineSSD

commit f45681f9becaa65111ed0a691ccf080a0cd5feb8 upstream.

This device does not correctly handle the LPM operations.

Also, the device cannot handle ATA pass-through commands
and locks up when attempted while running in super speed.

This patch adds the equivalent quirk logic as found in uas.

Signed-off-by: Tim Anderson <tsa@biglakesoftware.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm verity: fix crash on bufio buffer that was allocated with vmalloc

commit e4b069e0945fa14c71cf8b5b89f8b1b2aa68dbc2 upstream.

Since commit d1ac3ff008fb ("dm verity: switch to using asynchronous hash
crypto API") dm-verity uses asynchronous crypto calls for verification,
so that it can use hardware with asynchronous processing of crypto
operations.

These asynchronous calls don't support vmalloc memory, but the buffer data
can be allocated with vmalloc if dm-bufio is short of memory and uses a
reserved buffer that was preallocated in dm_bufio_client_create().

Fix verity_hash_update() so that it deals with vmalloc'd memory
correctly.

Reported-by: "Xiao, Jin" <jin.xiao@intel.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: d1ac3ff008fb ("dm verity: switch to using asynchronous hash crypto API")
Cc: stable@vger.kernel.org # 4.12+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: bus: need to unlink client before freeing

commit 34f1166afd67f9f48a08c52f36180048908506a4 upstream.

In case a client fails to connect in mei_cldev_enable(), the
caller won't call the mei_cldev_disable leaving the client
in a linked stated. Upon driver unload the client structure
will be freed in  mei_cl_bus_dev_release(), leaving a stale pointer
on a fail_list.  This will eventually end up in crash
during power down flow in mei_cl_set_disonnected().

RIP:  mei_cl_set_disconnected+0x5/0x260[mei]
Call trace:
mei_cl_all_disconnect+0x22/0x30
mei_reset+0x194/0x250
__synchronize_hardirq+0x43/0x50
_cond_resched+0x15/0x30
mei_me_intr_clear+0x20/0x100
mei_stop+0x76/0xb0
mei_me_shutdown+0x3f/0x80
pci_device_shutdown+0x34/0x60
kernel_restart+0x0e/0x30

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200455
Fixes: 'c110cdb17148 ("mei: bus: make a client pointer always available")'
Cc: <stable@vger.kernel.org> 4.10+
Tested-by: Georg Müller <georgmueller@gmx.net>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: bus: fix hw module get/put balance

commit 69bf5313035926b0b6a6578de4f3168a8f5c19b8 upstream.

In case the device is not connected it doesn't 'get'
hw module and hence should not 'put' it on disable.

Cc: <stable@vger.kernel.org> 4.16+
Fixes:'commit 257355a44b99 ("mei: make module referencing local to the bus.c")'
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200455
Tested-by: Georg Müller <georgmueller@gmx.net>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: ignore not found client in the enumeration

commit 8d2d8935d30cc2acc57a3196dc10dfa8d5cbcdab upstream.

Some of the ME clients are available only for BIOS operation and are
removed during hand off to an OS. However the removal is not instant.
A client may be visible on the client list when the mei driver requests
for enumeration, while the subsequent request for properties will be
answered with client not found error value. The default behavior
for an error is to perform client reset while this error is harmless and
the link reset should be prevented. This issue started to be visible due to
suspend/resume timing changes. Currently reported only on the Haswell
based system.

Fixes:
[33.564957] mei_me 0000:00:16.0: hbm: properties response: wrong status = 1 CLIENT_NOT_FOUND
[33.564978] mei_me 0000:00:16.0: mei_irq_read_handler ret = -71.
[33.565270] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000255 60002306 00000200 00004401 00000000 00000010

Cc: <stable@vger.kernel.org>
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: mtu3: fix error of xhci port id when enable U3 dual role

commit 78af87b8bbbbcaa613f1a7d8f14472fe9a7dc622 upstream.

If dual role mode is enabled, when switch u3port0 to device mode,
it will affect port id calculation of host(xHCI), specially when
host supports multi U2 ports or U3 ports, so need enable its dual
role mode, and fix it here.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: fix interrupt transfer error happened on MTK platforms

commit 0a3b53305c8ff427bbc1d9d5bd78524007f19600 upstream.

The MTK xHCI controller use some reserved bytes in endpoint context for
bandwidth scheduling, so need keep them in xhci_endpoint_copy();

The issue is introduced by:
commit f5249461b504 ("xhci: Clear the host side toggle manually when
endpoint is soft reset")
It resets endpoints and will drop bandwidth scheduling parameters used
by interrupt or isochronous endpoints on MTK xHCI controller.
Fixes: f5249461b504 ("xhci: Clear the host side toggle manually when
endpoint is soft reset")

Cc: stable@vger.kernel.org
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: Don't die twice if PCI xhci host is not responding in resume

commit f3dc41c5d22b2ca14a0802a65d8cdc33a3882d4e upstream.

usb_hc_died() should only be called once, and with the primary HCD
as parameter. It will mark both primary and secondary hcd's dead.

Remove the extra call to usb_cd_died with the shared hcd as parameter.

Fixes: ff9d78b36f76 ("USB: Set usb_hcd->state and flags for shared roothubs")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Fix use after free for URB cancellation on a reallocated endpoint

commit 4937213ba7fafa13f30496b3965ffe93970d8b53 upstream.

Make sure the cancelled URB is on the current endpoint ring.

If the endpoint ring has been reallocated since the URB was enqueued
then the URB may contain TD and TRB pointers to a already freed ring.
In this the case return the URB without touching any of the freed ring
structure data.

Don't try to stop the ring. It would be useless.

This can occur if endpoint is not flushed before it is dropped and
re-added, which is the case in usb_set_interface() as xhci does
things in an odd order.

Cc: <stable@vger.kernel.org>
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: hmc6352: fix potential Spectre v1

commit de916736aaaadddbd6061472969f667b14204aa9 upstream.

val is indirectly controlled by user-space, hence leading to a
potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/misc/hmc6352.c:54 compass_store() warn: potential spectre issue
'map' [r]

Fix this by sanitizing val before using it to index map

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: ibmvsm: Fix wrong assignment of return code

commit c55e9318871cd06e4aa10f5023cc2dcdfbb08577 upstream.

Currently the assignment is flipped and rc is always 0.

Signed-off-by: Bryant G. Ly <bryantly@linux.ibm.com>
Fixes: 0eca353e7ae7 ("misc: IBM Virtual Management Channel Driver (VMC)")
Reviewed-by: Bradley Warrum <bwarrum@us.ibm.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Tools: hv: Fix a bug in the key delete code

commit 86503bd35dec0ce363e9fdbf5299927422ed3899 upstream.

Fix a bug in the key delete code - the num_records range
from 0 to num_records-1.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reported-by: David Binderman <dcb314@hotmail.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vmbus: don't return values for uninitalized channels

commit 6712cc9c22117a8af9f3df272b4a44fd2e4201cd upstream.

For unsupported device types, the vmbus channel ringbuffer is never
initialized, and therefore reading the sysfs files will return garbage
or cause a kernel OOPS.

Fixes: c2e5df616e1a ("vmbus: add per-channel sysfs info")

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: <stable@vger.kernel.org> # 4.15
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: fix oopses in ovl_fill_super() failure paths

commit 8c25741aaad8be6fbe51510e917c740e0059cf83 upstream.

ovl_free_fs() dereferences ofs->workbasedir and ofs->upper_mnt in cases when
those might not have been initialized yet.

Fix the initialization order for these fields.

Reported-by: syzbot+c75f181dc8429d2eb887@syzkaller.appspotmail.com
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org> # v4.15
Fixes: 95e6d4177cb7 ("ovl: grab reference to workbasedir early")
Fixes: a9075cdb467d ("ovl: factor out ovl_free_fs() helper")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi: Fix I2C client removal in the SSIF driver

commit 0745dde62835be7e2afe62fcdb482fcad79cb743 upstream.

The SSIF driver was removing any client that came in through the
platform interface, but it should only remove clients that it
added.  On a failure in the probe function, this could result
in the following oops when the driver is removed and the
client gets unregistered twice:

 CPU: 107 PID: 30266 Comm: rmmod Not tainted 4.18.0+ #80
 Hardware name: Cavium Inc. Saber/Saber, BIOS Cavium reference firmware version 7.0 08/04/2018
 pstate: 60400009 (nZCv daif +PAN -UAO)
 pc : kernfs_find_ns+0x28/0x120
 lr : kernfs_find_and_get_ns+0x40/0x60
 sp : ffff00002310fb50
 x29: ffff00002310fb50 x28: ffff800a8240f800
 x27: 0000000000000000 x26: 0000000000000000
 x25: 0000000056000000 x24: ffff000009073000
 x23: ffff000008998b38 x22: 0000000000000000
 x21: ffff800ed86de820 x20: 0000000000000000
 x19: ffff00000913a1d8 x18: 0000000000000000
 x17: 0000000000000000 x16: 0000000000000000
 x15: 0000000000000000 x14: 5300737265766972
 x13: 643d4d4554535953 x12: 0000000000000030
 x11: 0000000000000030 x10: 0101010101010101
 x9 : ffff800ea06cc3f9 x8 : 0000000000000000
 x7 : 0000000000000141 x6 : ffff000009073000
 x5 : ffff800adb706b00 x4 : 0000000000000000
 x3 : 00000000ffffffff x2 : 0000000000000000
 x1 : ffff000008998b38 x0 : ffff000008356760
 Process rmmod (pid: 30266, stack limit = 0x00000000e218418d)
 Call trace:
  kernfs_find_ns+0x28/0x120
  kernfs_find_and_get_ns+0x40/0x60
  sysfs_unmerge_group+0x2c/0x6c
  dpm_sysfs_remove+0x34/0x70
  device_del+0x58/0x30c
  device_unregister+0x30/0x7c
  i2c_unregister_device+0x84/0x90 [i2c_core]
  ssif_platform_remove+0x38/0x98 [ipmi_ssif]
  platform_drv_remove+0x2c/0x6c
  device_release_driver_internal+0x168/0x1f8
  driver_detach+0x50/0xbc
  bus_remove_driver+0x74/0xe8
  driver_unregister+0x34/0x5c
  platform_driver_unregister+0x20/0x2c
  cleanup_ipmi_ssif+0x50/0xd82c [ipmi_ssif]
  __arm64_sys_delete_module+0x1b4/0x220
  el0_svc_handler+0x104/0x160
  el0_svc+0x8/0xc
 Code: aa1e03e0 aa0203f6 aa0103f7 d503201f (7940e280)
 ---[ end trace 09f0e34cce8e2d8c ]---
 Kernel panic - not syncing: Fatal exception
 SMP: stopping secondary CPUs
 Kernel Offset: disabled
 CPU features: 0x23800c38

So track the clients that the SSIF driver adds and only remove
those.

Reported-by: George Cherian <george.cherian@cavium.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: George Cherian <george.cherian@cavium.com>
Cc: <stable@vger.kernel.org> # 4.14.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi: Move BT capabilities detection to the detect call

commit c86ba91be75702c013bbf7379542920b6920e98f upstream.

The capabilities detection was being done as part of the normal
state machine, but it was possible for it to be running while
the upper layers of the IPMI driver were initializing the
device, resulting in error and failure to initialize.

Move the capabilities detection to the the detect function,
so it's done before anything else runs on the device.  This also
simplifies the state machine and removes some code, as a bonus.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reported-by: Andrew Banman <abanman@hpe.com>
Tested-by: Andrew Banman <abanman@hpe.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi: Rework SMI registration failure

commit 2512e40e48d21d8bac09f7e91d2c3ceb2d3b50b2 upstream.

There were certain situations where ipmi_register_smi() would
return a failure, but the interface would still be registered
and would need to be unregistered.  This is obviously a bad
design and resulted in an oops in certain failure cases.

If the interface is started up in ipmi_register_smi(), then
an error occurs, shut down the interface there so the
cleanup can be done properly.

Fix the various smi users, too.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reported-by: Justin Ernst <justin.ernst@hpe.com>
Tested-by: Justin Ernst <justin.ernst@hpe.com>
Cc: Andrew Banman <abanman@hpe.com>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: <stable@vger.kernel.org> # 4.18.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: omap_hsmmc: fix wakeirq handling on removal

commit 3c398f3c3bef21961eaaeb93227fa66d440dc83d upstream.

after unbinding mmc I get things like this:
[  185.294067] mmc1: card 0001 removed
[  185.305206] omap_hsmmc 480b4000.mmc: wake IRQ with no resume: -13

The wakeirq stays in /proc-interrupts

rebinding shows this:
[  289.795959] genirq: Flags mismatch irq 112. 0000200a (480b4000.mmc:wakeup) vs. 0000200a (480b4000.mmc:wakeup)
[  289.808959] omap_hsmmc 480b4000.mmc: Unable to request wake IRQ
[  289.815338] omap_hsmmc 480b4000.mmc: no SDIO IRQ support, falling back to polling

That bug seems to be introduced by switching from devm_request_irq()
to generic wakeirq handling.

So let us cleanup at removal.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Fixes: 5b83b2234be6 ("mmc: omap_hsmmc: Change wake-up interrupt to use generic wakeirq")
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/crypto: Fix return code checking in cbc_paes_crypt()

commit b81126e01a8c6048249955feea46c8217ebefa91 upstream.

The return code of cpacf_kmc() is less than the number of
bytes to process in case of an error, not greater.
The crypt routines for the other cipher modes already have
this correctly.

Cc: stable@vger.kernel.org # v4.11+
Fixes: 279378430768 ("s390/crypt: Add protected key AES module")
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Acked-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/ipoib: Avoid a race condition between start_xmit and cm_rep_handler

commit 816e846c2eb9129a3e0afa5f920c8bbc71efecaa upstream.

Inside of start_xmit() the call to check if the connection is up and the
queueing of the packets for later transmission is not atomic which leaves
a window where cm_rep_handler can run, set the connection up, dequeue
pending packets and leave the subsequently queued packets by start_xmit()
sitting on neigh->queue until they're dropped when the connection is torn
down. This only applies to connected mode. These dropped packets can
really upset TCP, for example, and cause multi-minute delays in
transmission for open connections.

Here's the code in start_xmit where we check to see if the connection is
up:

       if (ipoib_cm_get(neigh)) {
               if (ipoib_cm_up(neigh)) {
                       ipoib_cm_send(dev, skb, ipoib_cm_get(neigh));
                       goto unref;
               }
       }

The race occurs if cm_rep_handler execution occurs after the above
connection check (specifically if it gets to the point where it acquires
priv->lock to dequeue pending skb's) but before the below code snippet in
start_xmit where packets are queued.

       if (skb_queue_len(&neigh->queue) < IPOIB_MAX_PATH_REC_QUEUE) {
               push_pseudo_header(skb, phdr->hwaddr);
               spin_lock_irqsave(&priv->lock, flags);
               __skb_queue_tail(&neigh->queue, skb);
               spin_unlock_irqrestore(&priv->lock, flags);
       } else {
               ++dev->stats.tx_dropped;
               dev_kfree_skb_any(skb);
       }

The patch acquires the netif tx lock in cm_rep_handler for the section
where it sets the connection up and dequeues and retransmits deferred
skb's.

Fixes: 839fcaba355a ("IPoIB: Connected mode experimental support")
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Knister <aaron.s.knister@nasa.gov>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/netfront: fix waiting for xenbus state change

commit 8edfe2e992b75aee3da9316e9697c531194c2f53 upstream.

Commit 822fb18a82aba ("xen-netfront: wait xenbus state change when load
module manually") added a new wait queue to wait on for a state change
when the module is loaded manually. Unfortunately there is no wakeup
anywhere to stop that waiting.

Instead of introducing a new wait queue rename the existing
module_unload_q to module_wq and use it for both purposes (loading and
unloading).

As any state change of the backend might be intended to stop waiting
do the wake_up_all() in any case when netback_changed() is called.

Fixes: 822fb18a82aba ("xen-netfront: wait xenbus state change when load module manually")
Cc: <stable@vger.kernel.org> #4.18
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pstore: Fix incorrect persistent ram buffer mapping

commit 831b624df1b420c8f9281ed1307a8db23afb72df upstream.

persistent_ram_vmap() returns the page start vaddr.
persistent_ram_iomap() supports non-page-aligned mapping.

persistent_ram_buffer_map() always adds offset-in-page to the vaddr
returned from these two functions, which causes incorrect mapping of
non-page-aligned persistent ram buffer.

By default ftrace_size is 4096 and max_ftrace_cnt is nr_cpu_ids. Without
this patch, the zone_sz in ramoops_init_przs() is 4096/nr_cpu_ids which
might not be page aligned. If the offset-in-page > 2048, the vaddr will be
in next page. If the next page is not mapped, it will cause kernel panic:

[    0.074231] BUG: unable to handle kernel paging request at ffffa19e0081b000
...
[    0.075000] RIP: 0010:persistent_ram_new+0x1f8/0x39f
...
[    0.075000] Call Trace:
[    0.075000]  ramoops_init_przs.part.10.constprop.15+0x105/0x260
[    0.075000]  ramoops_probe+0x232/0x3a0
[    0.075000]  platform_drv_probe+0x3e/0xa0
[    0.075000]  driver_probe_device+0x2cd/0x400
[    0.075000]  __driver_attach+0xe4/0x110
[    0.075000]  ? driver_probe_device+0x400/0x400
[    0.075000]  bus_for_each_dev+0x70/0xa0
[    0.075000]  driver_attach+0x1e/0x20
[    0.075000]  bus_add_driver+0x159/0x230
[    0.075000]  ? do_early_param+0x95/0x95
[    0.075000]  driver_register+0x70/0xc0
[    0.075000]  ? init_pstore_fs+0x4d/0x4d
[    0.075000]  __platform_driver_register+0x36/0x40
[    0.075000]  ramoops_init+0x12f/0x131
[    0.075000]  do_one_initcall+0x4d/0x12c
[    0.075000]  ? do_early_param+0x95/0x95
[    0.075000]  kernel_init_freeable+0x19b/0x222
[    0.075000]  ? rest_init+0xbb/0xbb
[    0.075000]  kernel_init+0xe/0xfc
[    0.075000]  ret_from_fork+0x3a/0x50

Signed-off-by: Bin Yang <bin.yang@intel.com>
[kees: add comments describing the mapping differences, updated commit log]
Fixes: 24c3d2f342ed ("staging: android: persistent_ram: Make it possible to use memory outside of bootmem")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/cma: Protect cma dev list with lock

commit 954a8e3aea87e896e320cf648c1a5bbe47de443e upstream.

When AF_IB addresses are used during rdma_resolve_addr() a lock is not
held. A cma device can get removed while list traversal is in progress
which may lead to crash. ie

        CPU0                                     CPU1
        ====                                     ====
rdma_resolve_addr()
 cma_resolve_ib_dev()
  list_for_each()                         cma_remove_one()
    cur_dev->device                        mutex_lock(&lock)
                                            list_del();
                                           mutex_unlock(&lock);
                                           cma_process_remove();

Therefore, hold a lock while traversing the list which avoids such
situation.

Cc: <stable@vger.kernel.org> # 3.10
Fixes: f17df3b0dede ("RDMA/cma: Add support for AF_IB to rdma_resolve_addr()")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-netfront: fix warn message as irq device name has '/'

[ Upstream commit 21f2706b20100bb3db378461ab9b8e2035309b5b ]

There is a call trace generated after commit 2d408c0d4574b01b9ed45e02516888bf925e11a9(
xen-netfront: fix queue name setting). There is no 'device/vif/xx-q0-tx' file found
under /proc/irq/xx/.

This patch only picks up device type and id as its name.

With the patch, now /proc/interrupts looks like below and the warning message gone:
 70:         21          0          0          0   xen-dyn    -event     vif0-q0-tx
 71:         15          0          0          0   xen-dyn    -event     vif0-q0-rx
 72:         14          0          0          0   xen-dyn    -event     vif0-q1-tx
 73:         33          0          0          0   xen-dyn    -event     vif0-q1-rx
 74:         12          0          0          0   xen-dyn    -event     vif0-q2-tx
 75:         24          0          0          0   xen-dyn    -event     vif0-q2-rx
 76:         19          0          0          0   xen-dyn    -event     vif0-q3-tx
 77:         21          0          0          0   xen-dyn    -event     vif0-q3-rx

Below is call trace information without this patch:

name 'device/vif/0-q0-tx'
WARNING: CPU: 2 PID: 37 at fs/proc/generic.c:174 __xlate_proc_name+0x85/0xa0
RIP: 0010:__xlate_proc_name+0x85/0xa0
RSP: 0018:ffffb85c40473c18 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000006 RCX: 0000000000000006
RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff984c7f516930
RBP: ffffb85c40473cb8 R08: 000000000000002c R09: 0000000000000229
R10: 0000000000000000 R11: 0000000000000001 R12: ffffb85c40473c98
R13: ffffb85c40473cb8 R14: ffffb85c40473c50 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff984c7f500000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f69b6899038 CR3: 000000001c20a006 CR4: 00000000001606e0
Call Trace:
__proc_create+0x45/0x230
? snprintf+0x49/0x60
proc_mkdir_data+0x35/0x90
register_handler_proc+0xef/0x110
? proc_register+0xfc/0x110
? proc_create_data+0x70/0xb0
__setup_irq+0x39b/0x660
? request_threaded_irq+0xad/0x160
request_threaded_irq+0xf5/0x160
? xennet_tx_buf_gc+0x1d0/0x1d0 [xen_netfront]
bind_evtchn_to_irqhandler+0x3d/0x70
? xenbus_alloc_evtchn+0x41/0xa0
netback_changed+0xa46/0xcda [xen_netfront]
? find_watch+0x40/0x40
xenwatch_thread+0xc5/0x160
? finish_wait+0x80/0x80
kthread+0x112/0x130
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x35/0x40
Code: 81 5c 00 48 85 c0 75 cc 5b 49 89 2e 31 c0 5d 4d 89 3c 24 41 5c 41 5d 41 5e 41 5f c3 4c 89 ee 48 c7 c7 40 4f 0e b4 e8 65 ea d8 ff <0f> 0b b8 fe ff ff ff 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 0f 1f
---[ end trace 650e5561b0caab3a ]---

Signed-off-by: Xiao Liang <xiliang@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/AER: Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST

[ Upstream commit 7af02fcd84c16801958936f88b848944c726ca07 ]

According to the documentation, "pcie_ports=native", linux should use
native AER and DPC services.  While that is true for the _OSC method
parsing, this is not the only place that is checked.  Should the HEST
list PCIe ports as firmware-first, linux will not use native services.

This happens because aer_acpi_firmware_first() doesn't take 'pcie_ports'
into account.  This is wrong.  DPC uses the same logic when it decides
whether to load or not, so fixing this also fixes DPC not loading.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
[bhelgaas: return "false" from bool function (from kbuild robot)]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm/pti: Add an overflow check to pti_clone_pmds()

[ Upstream commit 935232ce28dfabff1171e5a7113b2d865fa9ee63 ]

The addr counter will overflow if the last PMD of the address space is
cloned, resulting in an endless loop.

Check for that and bail out of the loop when it happens.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Pavel Machek <pavel@ucw.cz>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: linux-mm@kvack.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: aliguori@amazon.com
Cc: daniel.gruss@iaik.tugraz.at
Cc: hughd@google.com
Cc: keescook@google.com
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Waiman Long <llong@redhat.com>
Cc: "David H . Gutteridge" <dhgutteridge@sympatico.ca>
Cc: joro@8bytes.org
Link: https://lkml.kernel.org/r/1531906876-13451-25-git-send-email-joro@8bytes.org
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/pti: Check the return value of pti_user_pagetable_walk_pmd()

[ Upstream commit 8c934e01a7ce685d98e970880f5941d79272c654 ]

pti_user_pagetable_walk_pmd() can return NULL, so the return value should
be checked to prevent a NULL pointer dereference.

Add the check and a warning when the PMD allocation fails.

Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: dave.hansen@linux.intel.com
Cc: luto@kernel.org
Cc: hpa@zytor.com
Cc: albcamus@gmail.com
Cc: zhong.weidong@zte.com.cn
Link: https://lkml.kernel.org/r/1532045192-49622-2-git-send-email-jiang.biao2@zte.com.cn
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/pti: Check the return value of pti_user_pagetable_walk_p4d()

[ Upstream commit b2b7d986a89b6c94b1331a909de1217214fb08c1 ]

pti_user_pagetable_walk_p4d() can return NULL, so the return value should
be checked to prevent a NULL pointer dereference.

Add the check and a warning when the P4D allocation fails.

Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: dave.hansen@linux.intel.com
Cc: luto@kernel.org
Cc: hpa@zytor.com
Cc: albcamus@gmail.com
Cc: zhong.weidong@zte.com.cn
Link: https://lkml.kernel.org/r/1532045192-49622-1-git-send-email-jiang.biao2@zte.com.cn
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: sharah - Unregister correct algorithms for SAHARA 3

[ Upstream commit 0e7d4d932ffc23f75efb31a8c2ac2396c1b81c55 ]

This patch fixes two typos related to unregistering algorithms supported by
SAHARAH 3. In sahara_register_algs the wrong algorithms are unregistered
in case of an error. In sahara_unregister_algs the wrong array is used to
determine the iteration count.

Signed-off-by: Michael Müller <michael@fds-team.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: mv_xor_v2: kill the tasklets upon exit

[ Upstream commit 8bbafed8dd5cfa81071b50ead5cb60367fdef3a9 ]

The mv_xor_v2 driver uses a tasklet, initialized during the probe()
routine. However, it forgets to cleanup the tasklet using
tasklet_kill() function during the remove() routine, which this patch
fixes. This prevents the tasklet from potentially running after the
module has been removed.

Fixes: 19a340b1a820 ("dmaengine: mv_xor_v2: new driver")

Signed-off-by: Hanna Hawa <hannah@marvell.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/ipmmu-vmsa: IMUCTRn.TTSEL needs a special usage on R-Car Gen3

[ Upstream commit 2ae86955703e9e6a119af4bbe27f6b6dd7a43131 ]

The TTSEL bit of IMUCTRn register of R-Car Gen3 needs to be set
unused MMU context number even if uTLBs are disabled
(The MMUEN bit of IMUCTRn register = 0).
Since initial values of IMUCTRn.TTSEL on all IPMMU-domains are 0,
this patch adds a new feature "reserved_context" to reserve IPMMU
context number 0 as the unused MMU context.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: qcom_spmi: Fix warning Bad of_node_put()

[ Upstream commit fffe7f52eb5db41eedadba9a8038e982dcfaee0c ]

For of_find_node_by_name(), you typically pass what the previous call
returned. Therefore, of_find_node_by_name() increases the refcount of
the returned node, and decreases the refcount of the node passed as the
first argument.

of_find_node_by_name() is incorrectly used, and produces a warning.
Fix the warning by using the more suitable function
of_get_child_by_name().

Also add a missing of_node_put() for the returned value, since this was
previously being leaked.

OF: ERROR: Bad of_node_put() on /soc/qcom,spmi@400f000/pmic@3/regulators
CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W         4.18.0-rc4-00223-gefd7b360b70e #12
Hardware name: Qualcomm Technologies, Inc. DB820c (DT)
Call trace:
 dump_backtrace+0x0/0x1a8
 show_stack+0x14/0x20
 dump_stack+0x90/0xb4
 of_node_release+0x74/0x78
 kobject_put+0x90/0x1f0
 of_node_put+0x14/0x20
 of_find_node_by_name+0x80/0xd8
 qcom_spmi_regulator_probe+0x30c/0x508

Fixes: 0caecaa87202 ("regulator: qcom_spmi: Add support for SAW")
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: qcom_spmi: Use correct regmap when checking for error

[ Upstream commit 85046a15529606466bc778e1205f4cab8e3724d1 ]

Since we have just assigned saw_regmap, and since the error message
refers to saw_regmap, it feels safe to assume that it is saw_regmap,
and not regmap, that should be checked for errors.

Fixes: 0caecaa87202 ("regulator: qcom_spmi: Add support for SAW")
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pp: Set Max clock level to display by default

[ Upstream commit 97e8f102f5a9123d30258e196c6c1ea29cf52e83 ]

avoid the error in dmesg:
[drm:dm_pp_get_static_clocks]
*ERROR* DM_PPLIB: invalid powerlevel state: 0!

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: aspeed: Fix initial values of master and slave state

[ Upstream commit 517fde0eb5a8f46c54ba6e2c36e32563b23cb14f ]

This patch changes the order of enum aspeed_i2c_master_state and
enum aspeed_i2c_slave_state defines to make their initial value to
ASPEED_I2C_MASTER_INACTIVE and ASPEED_I2C_SLAVE_STOP respectively.
In case of multi-master use, if a slave data comes ahead of the
first master xfer, master_state starts from an invalid state so
this change fixes the issue.

Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/base: stop new probing during shutdown

[ Upstream commit 3297c8fc65af5d40501ea7cddff1b195cae57e4e ]

There is a race window in device_shutdown(), which may cause
-1. parent device shut down before child or
-2. no shutdown on a new probing device.

For 1st, taking the following scenario:
         device_shutdown                        new plugin device
  list_del_init(parent_dev);
  spin_unlock(list_lock);
                                                  device_add(child)
                                                  probe child
  shutdown parent_dev
       --> now child is on the tail of devices_kset

For 2nd, taking the following scenario:
         device_shutdown                        new plugin device
                                                  device_add(dev)
  device_lock(dev);
  ...
  device_unlock(dev);
                                                  probe dev
       --> now, the new occurred dev has no opportunity to shutdown

To fix this race issue, just prevent the new probing request. With this
logic, device_shutdown() is more similar to dpm_prepare().

Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm/arm64: Fix vgic init race

[ Upstream commit 1d47191de7e15900f8fbfe7cccd7c6e1c2d7c31a ]

The vgic_init function can race with kvm_arch_vcpu_create() which does
not hold kvm_lock() and we therefore have no synchronization primitives
to ensure we're doing the right thing.

As the user is trying to initialize or run the VM while at the same time
creating more VCPUs, we just have to refuse to initialize the VGIC in
this case rather than silently failing with a broken VCPU.

Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: toshiba_acpi: Fix defined but not used build warnings

[ Upstream commit c2e2a618eb7104e18fdcf739d4d911563812a81c ]

Fix a build warning in toshiba_acpi.c when CONFIG_PROC_FS is not enabled
by marking the unused function as __maybe_unused.

../drivers/platform/x86/toshiba_acpi.c:1685:12: warning: 'version_proc_show' defined but not used [-Wunused-function]

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Azael Avalos <coproscefalo@gmail.com>
Cc: platform-driver-x86@vger.kernel.org
Cc: Andy Shevchenko <andy@infradead.org>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: reset layer2 attribute on layer switch

[ Upstream commit 70551dc46ffa3555a0b5f3545b0cd87ab67fd002 ]

After the subdriver's remove() routine has completed, the card's layer
mode is undetermined again. Reflect this in the layer2 field.

If qeth_dev_layer2_store() hits an error after remove() was called, the
card _always_ requires a setup(), even if the previous layer mode is
requested again.
But qeth_dev_layer2_store() bails out early if the requested layer mode
still matches the current one. So unless we reset the layer2 field,
re-probing the card back to its previous mode is currently not possible.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: fix race in used-buffer accounting

[ Upstream commit a702349a4099cd5a7bab0904689d8e0bf8dcd622 ]

By updating q->used_buffers only _after_ do_QDIO() has completed, there
is a potential race against the buffer's TX completion. In the unlikely
case that the TX completion path wins, qeth_qdio_output_handler() would
decrement the counter before qeth_flush_buffers() even incremented it.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc: qcom: smem: Correct check for global partition

[ Upstream commit 0b65c59e3a5475895c93ea5f130597db16b8abf6 ]

The moved check for the global partition ended up in the wrong place and I
failed to spot this in my review. This moves it to the correct place.

Fixes: 11d2e7edac6a ("soc: qcom: smem: check sooner in qcom_smem_set_global_partition()")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: qcom: msm8974-hammerhead: increase load on l20 for sdhci

[ Upstream commit 03864e57770a9541e7ff3990bacf2d9a2fffcd5d ]

The kernel would not boot on the hammerhead hardware due to the
following error:

mmc0: Timeout waiting for hardware interrupt.
mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc0: sdhci: Sys addr:  0x00000200 | Version:  0x00003802
mmc0: sdhci: Blk size:  0x00000200 | Blk cnt:  0x00000200
mmc0: sdhci: Argument:  0x00000000 | Trn mode: 0x00000023
mmc0: sdhci: Present:   0x03e80000 | Host ctl: 0x00000034
mmc0: sdhci: Power:     0x00000001 | Blk gap:  0x00000000
mmc0: sdhci: Wake-up:   0x00000000 | Clock:    0x00000007
mmc0: sdhci: Timeout:   0x0000000e | Int stat: 0x00000000
mmc0: sdhci: Int enab:  0x02ff900b | Sig enab: 0x02ff100b
mmc0: sdhci: AC12 err:  0x00000000 | Slot int: 0x00000000
mmc0: sdhci: Caps:      0x642dc8b2 | Caps_1:   0x00008007
mmc0: sdhci: Cmd:       0x00000c1b | Max curr: 0x00000000
mmc0: sdhci: Resp[0]:   0x00000c00 | Resp[1]:  0x00000000
mmc0: sdhci: Resp[2]:   0x00000000 | Resp[3]:  0x00000000
mmc0: sdhci: Host ctl2: 0x00000008
mmc0: sdhci: ADMA Err:  0x00000000 | ADMA Ptr: 0x70040220
mmc0: sdhci: ============================================
mmc0: Card stuck in wrong state! mmcblk0 card_busy_detect status: 0xe00
mmc0: cache flush error -110
mmc0: Reset 0x1 never completed.

This patch increases the load on l20 to 0.2 amps for the sdhci
and allows the device to boot normally.

Signed-off-by: Bhushan Shah <bshah@kde.org>
Signed-off-by: Brian Masney <masneyb@onstation.org>
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: db410c: Fix Bluetooth LED trigger

[ Upstream commit e53db018315b7660bb7000a29e79faff2496c2c2 ]

Current LED trigger, 'bt', is not known/used by any existing driver.
Fix this by renaming it to 'bluetooth-power' trigger which is
controlled by the Bluetooth subsystem.

Fixes: 9943230c8860 ("arm64: dts: qcom: Add apq8016-sbc board LED's related device nodes")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-netfront: fix queue name setting

[ Upstream commit 2d408c0d4574b01b9ed45e02516888bf925e11a9 ]

Commit f599c64fdf7d ("xen-netfront: Fix race between device setup and
open") changed the initialization order: xennet_create_queues() now
happens before we do register_netdev() so using netdev->name in
xennet_init_queue() is incorrect, we end up with the following in
/proc/interrupts:

 60:        139          0   xen-dyn    -event     eth%d-q0-tx
 61:        265          0   xen-dyn    -event     eth%d-q0-rx
 62:        234          0   xen-dyn    -event     eth%d-q1-tx
 63:          1          0   xen-dyn    -event     eth%d-q1-rx

and this looks ugly. Actually, using early netdev name (even when it's
already set) is also not ideal: nowadays we tend to rename eth devices
and queue name may end up not corresponding to the netdev name.

Use nodename from xenbus device for queue naming: this can't change in VM's
lifetime. Now /proc/interrupts looks like

 62:        202          0   xen-dyn    -event     device/vif/0-q0-tx
 63:        317          0   xen-dyn    -event     device/vif/0-q0-rx
 64:        262          0   xen-dyn    -event     device/vif/0-q1-tx
 65:         17          0   xen-dyn    -event     device/vif/0-q1-rx

Fixes: f599c64fdf7d ("xen-netfront: Fix race between device setup and open")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfp: avoid buffer leak when FW communication fails

[ Upstream commit 07300f774fec9519663a597987a4083225588be4 ]

After device is stopped we reset the rings by moving all free buffers
to positions [0, cnt - 2], and clear the position cnt - 1 in the ring.
We then proceed to clear the read/write pointers.  This means that if
we try to reset the ring again the code will assume that the next to
fill buffer is at position 0 and swap it with cnt - 1.  Since we
previously cleared position cnt - 1 it will lead to leaking the first
buffer and leaving ring in a bad state.

This scenario can only happen if FW communication fails, in which case
the ring will never be used again, so the fact it's in a bad state will
not be noticed.  Buffer leak is the only problem.  Don't try to move
buffers in the ring if the read/write pointers indicate the ring was
never used or have already been reset.

nfp_net_clear_config_and_disable() is now fully idempotent.

Found by code inspection, FW communication failures are very rare,
and reconfiguring a live device is not common either, so it's unlikely
anyone has ever noticed the leak.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Generic DSD detection for Thesycon-based implementations

[ Upstream commit 1ea0358ecb848058b35b6da13d7f4c08610a73a8 ]

Thesycon provides solutions to XMOS chips, and has its own device
vendor id.

In this patch, we use generic method to detect DSD capability of
Thesycon-based UAC2 implementations in order to support a wide range
of current and future devices.

The patch will enable the SNDRV_PCM_FMTBIT_DSD_U32_BE bit for the DAC
hence enable native DSD playback up to DSD512 format.

Signed-off-by: Yue Wang <yuleopen@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi/arm: preserve early mapping of UEFI memory map longer for BGRT

[ Upstream commit 3ea86495aef2f6de26b7cb1599ba350dd6a0c521 ]

The BGRT code validates the contents of the table against the UEFI
memory map, and so it expects it to be mapped when the code runs.

On ARM, this is currently not the case, since we tear down the early
mapping after efi_init() completes, and only create the permanent
mapping in arm_enable_runtime_services(), which executes as an early
initcall, but still leaves a window where the UEFI memory map is not
mapped.

So move the call to efi_memmap_unmap() from efi_init() to
arm_enable_runtime_services().

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[will: fold in EFI_MEMMAP attribute check from Ard]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

reset: imx7: Fix always writing bits as 0

[ Upstream commit 26fce0557fa639fb7bbc33e31a57cff7df25c3a0 ]

Right now the only user of reset-imx7 is pci-imx6 and the
reset_control_assert and deassert calls on pciephy_reset don't toggle
the PCIEPHY_BTN and PCIEPHY_G_RST bits as expected. Fix this by writing
1 or 0 respectively.

The reference manual is not very clear regarding SRC_PCIEPHY_RCR but for
other registers like MIPIPHY and HSICPHY the bits are explicitly
documented as "1 means assert, 0 means deassert".

The values are still reversed for IMX7_RESET_PCIE_CTRL_APPS_EN.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: fix possible spectre-v1 write in ptrace_hbp_set_event()

[ Upstream commit 14d6e289a89780377f8bb09de8926d3c62d763cd ]

It's possible for userspace to control idx. Sanitize idx when using it
as an array index, to inhibit the potential spectre-v1 write gadget.

Found by smatch.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wan/fsl_ucc_hdlc: use IS_ERR_VALUE() to check return value of qe_muram_alloc

[ Upstream commit fd800f646402c0f85547166b59ca065175928b7b ]

qe_muram_alloc return a unsigned long integer,which should not
compared with zero. check it using IS_ERR_VALUE() to fix this.

Fixes: c19b6d246a35 ("drivers/net: support hdlc function for QE-UCC")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Smack: Fix handling of IPv4 traffic received by PF_INET6 sockets

[ Upstream commit 129a99890936766f4b69b9da7ed88366313a9210 ]

A socket which has sk_family set to PF_INET6 is able to receive not
only IPv6 but also IPv4 traffic (IPv4-mapped IPv6 addresses).

Prior to this patch, the smk_skb_to_addr_ipv6() could have been
called for socket buffers containing IPv4 packets, in result such
traffic was allowed.

Signed-off-by: Piotr Sawicki <p.sawicki2@partner.samsung.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: restrict delayed tailroom needed decrement

[ Upstream commit 133bf90dbb8b873286f8ec2e81ba26e863114b8c ]

As explained in ieee80211_delayed_tailroom_dec(), during roam,
keys of the old AP will be destroyed and new keys will be
installed. Deletion of the old key causes
crypto_tx_tailroom_needed_cnt to go from 1 to 0 and the new key
installation causes a transition from 0 to 1.

Whenever crypto_tx_tailroom_needed_cnt transitions from 0 to 1,
we invoke synchronize_net(); the reason for doing this is to avoid
a race in the TX path as explained in increment_tailroom_need_count().
This synchronize_net() operation can be slow and can affect the station
roam time. To avoid this, decrementing the crypto_tx_tailroom_needed_cnt
is delayed for a while so that upon installation of new key the
transition would be from 1 to 2 instead of 0 to 1 and thereby
improving the roam time.

This is all correct for a STA iftype, but deferring the tailroom_needed
decrement for other iftypes may be unnecessary.

For example, let's consider the case of a 4-addr client connecting to
an AP for which AP_VLAN interface is also created, let the initial
value for tailroom_needed on the AP be 1.

* 4-addr client connects to the AP (AP: tailroom_needed = 1)
* AP will clear old keys, delay decrement of tailroom_needed count
* AP_VLAN is created, it takes the tailroom count from master
  (AP_VLAN: tailroom_needed = 1, AP: tailroom_needed = 1)
* Install new key for the station, assume key is plumbed in the HW,
  there won't be any change in tailroom_needed count on AP iface
* Delayed decrement of tailroom_needed count on AP
  (AP: tailroom_needed = 0, AP_VLAN: tailroom_needed = 1)

Because of the delayed decrement on AP iface, tailroom_needed count goes
out of sync between AP(master iface) and AP_VLAN(slave iface) and
there would be unnecessary tailroom created for the packets going
through AP_VLAN iface.

Also, WARN_ONs were observed while trying to bring down the AP_VLAN
interface:
(warn_slowpath_common) (warn_slowpath_null+0x18/0x20)
(warn_slowpath_null) (ieee80211_free_keys+0x114/0x1e4)
(ieee80211_free_keys) (ieee80211_del_virtual_monitor+0x51c/0x850)
(ieee80211_del_virtual_monitor) (ieee80211_stop+0x30/0x3c)
(ieee80211_stop) (__dev_close_many+0x94/0xb8)
(__dev_close_many) (dev_close_many+0x5c/0xc8)

Restricting delayed decrement to station interface alone fixes the problem
and it makes sense to do so because delayed decrement is done to improve
roam time which is applicable only for client devices.

Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: jz4740: Bump zload address

[ Upstream commit c6ea7e9747318e5a6774995f4f8e3e0f7c0fa8ba ]

Having the zload address at 0x8060.0000 means the size of the
uncompressed kernel cannot be bigger than around 6 MiB, as it is
deflated at address 0x8001.0000.

This limit is too small; a kernel with some built-in drivers and things
like debugfs enabled will already be over 6 MiB in size, and so will
fail to extract properly.

To fix this, we bump the zload address from 0x8060.0000 to 0x8100.0000.

This is fine, as all the boards featuring Ingenic JZ SoCs have at least
32 MiB of RAM, and use u-boot or compatible bootloaders which won't
hardcode the load address but read it from the uImage's header.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19787/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: rt5514: Fix the issue of the delay volume applied

[ Upstream commit d96f8bd28cd0bae3e6702ae90df593628ef6906f ]

The patch fixes the issue of the delay volume applied.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-camera: handle wait_for_completion_timeout return properly

[ Upstream commit 5b70084f6cbcd53f615433f9d216e01bd71de0bb ]

wait_for_completion_timeout returns unsigned long not int so a variable of
proper type is introduced. Further the check for <= 0 is ambiguous and
should be == 0 here indicating timeout.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: 7b3ad5abf027 ("staging: Import the BCM2835 MMAL-based V4L2 camera driver.")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-camera: fix timeout handling in wait_for_completion_timeout

[ Upstream commit b7afce51d95726a619743aaad8870db66dfa1479 ]

wait_for_completion_timeout returns unsigned long not int so a variable of
proper type is introduced. Further the check for <= 0 is ambiguous and should
be == 0 here indicating timeout which is the only error case so no additional
check needed here.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: 7b3ad5abf027 ("staging: Import the BCM2835 MMAL-based V4L2 camera driver.")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf script: Show correct offsets for DWARF-based unwinding

[ Upstream commit 2a9d5050dc84fa2060f08a52f632976923e0fa7e ]

When perf/data is recorded with the dwarf call-graph option, the
callchain shown by 'perf script' still shows the binary offsets of the
userspace symbols instead of their virtual addresses. Since the symbol
offset calculation is based on using virtual address as the ip, we see
incorrect offsets as well.

The use of virtual addresses affects the ability to find out the
line number in the corresponding source file to which an address
maps to as described in commit 67540759151a ("perf unwind: Use
addr_location::addr instead of ip for entries").

This has also been addressed by temporarily converting the virtual
address to the correponding binary offset so that it can be mapped
to the source line number correctly.

This is a follow-up for commit 19610184693c ("perf script: Show
virtual addresses instead of offsets").

This can be verified on a powerpc64le system running Fedora 27 as
shown below:

  # perf probe -x /usr/lib64/libc-2.26.so -a inet_pton
  # perf record -e probe_libc:inet_pton --call-graph=dwarf ping -6 -c 1 ::1

Before:

  # perf report --stdio --no-children -s sym,srcline -g address

  # Samples: 1  of event 'probe_libc:inet_pton'
  # Event count (approx.): 1
  #
  # Overhead  Symbol                Source:Line
  # ........  ....................  ...........
  #
     100.00%  [.] __GI___inet_pton  inet_pton.c
              |
              ---gaih_inet getaddrinfo.c:537 (inlined)
                 __GI_getaddrinfo getaddrinfo.c:2304 (inlined)
                 main ping.c:519
                 generic_start_main libc-start.c:308 (inlined)
                 __libc_start_main libc-start.c:102
  ...

  # perf script -F comm,ip,sym,symoff,srcline,dso

  ping
                    15af28 __GI___inet_pton+0xffff000099160008 (/usr/lib64/libc-2.26.so)
    libc-2.26.so[ffff80004ca0af28]
                    10fa53 gaih_inet+0xffff000099160f43
    libc-2.26.so[ffff80004c9bfa53] (inlined)
                    1105b3 __GI_getaddrinfo+0xffff000099160163
    libc-2.26.so[ffff80004c9c05b3] (inlined)
                      2d6f main+0xfffffffd9f1003df (/usr/bin/ping)
    ping[fffffffecf882d6f]
                     2369f generic_start_main+0xffff00009916013f
    libc-2.26.so[ffff80004c8d369f] (inlined)
                     23897 __libc_start_main+0xffff0000991600b7 (/usr/lib64/libc-2.26.so)
    libc-2.26.so[ffff80004c8d3897]

After:

  # perf report --stdio --no-children -s sym,srcline -g address

  # Samples: 1  of event 'probe_libc:inet_pton'
  # Event count (approx.): 1
  #
  # Overhead  Symbol                Source:Line
  # ........  ....................  ...........
  #
     100.00%  [.] __GI___inet_pton  inet_pton.c
              |
              ---gaih_inet.constprop.7 getaddrinfo.c:537
                 getaddrinfo getaddrinfo.c:2304
                 main ping.c:519
                 generic_start_main.isra.0 libc-start.c:308
                 __libc_start_main libc-start.c:102
  ...

  # perf script -F comm,ip,sym,symoff,srcline,dso

  ping
              7fffb38aaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so)
    inet_pton.c:68
              7fffb385fa53 gaih_inet.constprop.7+0xf43 (/usr/lib64/libc-2.26.so)
    getaddrinfo.c:537
              7fffb38605b3 getaddrinfo+0x163 (/usr/lib64/libc-2.26.so)
    getaddrinfo.c:2304
                 130782d6f main+0x3df (/usr/bin/ping)
    ping.c:519
              7fffb377369f generic_start_main.isra.0+0x13f (/usr/lib64/libc-2.26.so)
    libc-start.c:308
              7fffb3773897 __libc_start_main+0xb7 (/usr/lib64/libc-2.26.so)
    libc-start.c:102

Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Fixes: 67540759151a ("perf unwind: Use addr_location::addr instead of ip for entries")
Link: http://lkml.kernel.org/r/20180703120555.32971-1-sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/powernv: opal_put_chars partial write fix

[ Upstream commit bd90284cc6c1c9e8e48c8eadd0c79574fcce0b81 ]

The intention here is to consume and discard the remaining buffer
upon error. This works if there has not been a previous partial write.
If there has been, then total_len is no longer total number of bytes
to copy. total_len is always "bytes left to copy", so it should be
added to written bytes.

This code may not be exercised any more if partial writes will not be
hit, but this is a small bugfix before a larger change.

Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm/arm64: vgic: Fix possible spectre-v1 write in vgic_mmio_write_apr()

[ Upstream commit 6b8b9a48545e08345b8ff77c9fd51b1aebdbefb3 ]

It's possible for userspace to control n. Sanitize n when using it as an
array index, to inhibit the potential spectre-v1 write gadget.

Note that while it appears that n must be bound to the interval [0,3]
due to the way it is extracted from addr, we cannot guarantee that
compiler transformations (and/or future refactoring) will ensure this is
the case, and given this is a slow path it's better to always perform
the masking.

Found by smatch.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme-rdma: unquiesce queues when deleting the controller

[ Upstream commit 90140624e8face94207003ac9a9d2a329b309d68 ]

If the controller is going away, we need to unquiesce the IO queues so
that all pending request can fail gracefully before moving forward with
controller deletion. Do that before we destroy the IO queues so
blk_cleanup_queue won't block in freeze.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmet: fix file discard return status

[ Upstream commit 1b72b71faccee986e2128a271125177dfe91f7b7 ]

If nvmet_copy_from_sgl failed, we falsly return successful
completion status.

Fixes: d5eff33ee6f8 ("nvmet: add simple file backed ns support")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf powerpc: Fix callchain ip filtering

[ Upstream commit c715fcfda5a08edabaa15508742be926b7ee51db ]

For powerpc64, redundant entries in the callchain are filtered out by
determining the state of the return address and the stack frame using
DWARF debug information.

For making these filtering decisions we must analyze the debug
information for the location corresponding to the program counter value,
i.e. the first entry in the callchain, and not the LR value; otherwise,
perf may filter out either the second or the third entry in the
callchain incorrectly.

This can be observed on a powerpc64le system running Fedora 27 as shown
below.

Case 1 - Attaching a probe at inet_pton+0x8 (binary offset 0x15af28).
         Return address is still in LR and a new stack frame is not yet
         allocated. The LR value, i.e. the second entry, should not be
 filtered out.

  # objdump -d /usr/lib64/libc-2.26.so | less
  ...
  000000000010eb10 <gaih_inet.constprop.7>:
  ...
    10fa48:       78 bb e4 7e     mr      r4,r23
    10fa4c:       0a 00 60 38     li      r3,10
    10fa50:       d9 b4 04 48     bl      15af28 <inet_pton+0x8>
    10fa54:       00 00 00 60     nop
    10fa58:       ac f4 ff 4b     b       10ef04 <gaih_inet.constprop.7+0x3f4>
  ...
  0000000000110450 <getaddrinfo>:
  ...
    1105a8:       54 00 ff 38     addi    r7,r31,84
    1105ac:       58 00 df 38     addi    r6,r31,88
    1105b0:       69 e5 ff 4b     bl      10eb18 <gaih_inet.constprop.7+0x8>
    1105b4:       78 1b 71 7c     mr      r17,r3
    1105b8:       50 01 7f e8     ld      r3,336(r31)
  ...
  000000000015af20 <inet_pton>:
    15af20:       0b 00 4c 3c     addis   r2,r12,11
    15af24:       e0 c1 42 38     addi    r2,r2,-15904
    15af28:       a6 02 08 7c     mflr    r0
    15af2c:       f0 ff c1 fb     std     r30,-16(r1)
    15af30:       f8 ff e1 fb     std     r31,-8(r1)
  ...

  # perf probe -x /usr/lib64/libc-2.26.so -a inet_pton+0x8
  # perf record -e probe_libc:inet_pton -g ping -6 -c 1 ::1
  # perf script

Before:

  ping  4507 [002] 514985.546540: probe_libc:inet_pton: (7fffa7dbaf28)
              7fffa7dbaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so)
              7fffa7d705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so)
                 13fb52d70 _init+0xbfc (/usr/bin/ping)
              7fffa7c836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
              7fffa7c83898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
                         0 [unknown] ([unknown])

After:

  ping  4507 [002] 514985.546540: probe_libc:inet_pton: (7fffa7dbaf28)
              7fffa7dbaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so)
              7fffa7d6fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so)
              7fffa7d705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so)
                 13fb52d70 _init+0xbfc (/usr/bin/ping)
              7fffa7c836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
              7fffa7c83898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
                         0 [unknown] ([unknown])

Case 2 - Attaching a probe at _int_malloc+0x180 (binary offset 0x9cf10).
         Return address in still in LR and a new stack frame has already
         been allocated but not used. The caller's caller, i.e. the third
 entry, is invalid and should be filtered out and not the second
 one.

  # objdump -d /usr/lib64/libc-2.26.so | less
  ...
  000000000009cd90 <_int_malloc>:
     9cd90:       17 00 4c 3c     addis   r2,r12,23
     9cd94:       70 a3 42 38     addi    r2,r2,-23696
     9cd98:       26 00 80 7d     mfcr    r12
     9cd9c:       f8 ff e1 fb     std     r31,-8(r1)
     9cda0:       17 00 e4 3b     addi    r31,r4,23
     9cda4:       d8 ff 61 fb     std     r27,-40(r1)
     9cda8:       78 23 9b 7c     mr      r27,r4
     9cdac:       1f 00 bf 2b     cmpldi  cr7,r31,31
     9cdb0:       f0 ff c1 fb     std     r30,-16(r1)
     9cdb4:       b0 ff c1 fa     std     r22,-80(r1)
     9cdb8:       78 1b 7e 7c     mr      r30,r3
     9cdbc:       08 00 81 91     stw     r12,8(r1)
     9cdc0:       11 ff 21 f8     stdu    r1,-240(r1)
     9cdc4:       4c 01 9d 41     bgt     cr7,9cf10 <_int_malloc+0x180>
     9cdc8:       20 00 a4 2b     cmpldi  cr7,r4,32
  ...
     9cf08:       00 00 00 60     nop
     9cf0c:       00 00 42 60     ori     r2,r2,0
     9cf10:       e4 06 ff 7b     rldicr  r31,r31,0,59
     9cf14:       40 f8 a4 7f     cmpld   cr7,r4,r31
     9cf18:       68 05 9d 41     bgt     cr7,9d480 <_int_malloc+0x6f0>
  ...
  000000000009e3c0 <tcache_init.part.4>:
  ...
     9e420:       40 02 80 38     li      r4,576
     9e424:       78 fb e3 7f     mr      r3,r31
     9e428:       71 e9 ff 4b     bl      9cd98 <_int_malloc+0x8>
     9e42c:       00 00 a3 2f     cmpdi   cr7,r3,0
     9e430:       78 1b 7e 7c     mr      r30,r3
  ...
  000000000009f7a0 <__libc_malloc>:
  ...
     9f8f8:       00 00 89 2f     cmpwi   cr7,r9,0
     9f8fc:       1c ff 9e 40     bne     cr7,9f818 <__libc_malloc+0x78>
     9f900:       c9 ea ff 4b     bl      9e3c8 <tcache_init.part.4+0x8>
     9f904:       00 00 00 60     nop
     9f908:       e8 90 22 e9     ld      r9,-28440(r2)
  ...

  # perf probe -x /usr/lib64/libc-2.26.so -a _int_malloc+0x180
  # perf record -e probe_libc:_int_malloc -g ./test-malloc
  # perf script

Before:

  test-malloc  6554 [009] 515975.797403: probe_libc:_int_malloc: (7fffa6e6cf10)
              7fffa6e6cf10 _int_malloc+0x180 (/usr/lib64/libc-2.26.so)
              7fffa6dd0000 [unknown] (/usr/lib64/libc-2.26.so)
              7fffa6e6f904 malloc+0x164 (/usr/lib64/libc-2.26.so)
              7fffa6e6f9fc malloc+0x25c (/usr/lib64/libc-2.26.so)
                  100006b4 main+0x38 (/home/testuser/test-malloc)
              7fffa6df36a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
              7fffa6df3898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
                         0 [unknown] ([unknown])

After:

  test-malloc  6554 [009] 515975.797403: probe_libc:_int_malloc: (7fffa6e6cf10)
              7fffa6e6cf10 _int_malloc+0x180 (/usr/lib64/libc-2.26.so)
              7fffa6e6e42c tcache_init.part.4+0x6c (/usr/lib64/libc-2.26.so)
              7fffa6e6f904 malloc+0x164 (/usr/lib64/libc-2.26.so)
              7fffa6e6f9fc malloc+0x25c (/usr/lib64/libc-2.26.so)
                  100006b4 main+0x38 (/home/sandipan/test-malloc)
              7fffa6df36a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
              7fffa6df3898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
                         0 [unknown] ([unknown])

Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Maynard Johnson <maynard@us.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Fixes: a60335ba3298 ("perf tools powerpc: Adjust callchain based on DWARF debug info")
Link: http://lkml.kernel.org/r/24bb726d91ed173aebc972ec3f41a2ef2249434e.1530724939.git.sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: exynos: Clear global variable on init error path

[ Upstream commit cd4806911cee3901bc2b5eb95603cf1958720b57 ]

For most of Exynos SoCs, Power Management Unit (PMU) address space is
mapped into global variable 'pmu_base_addr' very early when initializing
PMU interrupt controller.  A lot of other machine code depends on it so
when doing iounmap() on this address, clear the global as well to avoid
usage of invalid value (pointing to unmapped memory region).

Properly mapped PMU address space is a requirement for all other machine
code so this fix is purely theoretical.  Boot will fail immediately in
many other places after following this error path.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

omapfb: rename omap2 module to omap2fb.ko

[ Upstream commit 4bcd8c90ac0f27d3d76fcfc50582ff3685059de9 ]

In a kernel configuration with both CONFIG_FB_OMAP=m and CONFIG_FB_OMAP2=m,
Kbuild fails to point out that we have two modules with the same name (omapfb.ko),
but instead fails with a cryptic error message like:

ERROR: "omapfb_register_panel" [drivers/video/fbdev/omap/lcd_osk.ko] undefined!

This can now happen when building a randconfig kernel with CONFIG_ARCH_OMAP1,
as the omap1 fbdev driver depends on that, whiel the omap2 fbdev driver can
now be built anywhere with CONFIG_COMPILE_TEST.

The solution is to rename one of the two modules, so for consistency with
the directory naming I decided to rename the omap2 version to omap2fb.ko.

Fixes: 7378f1149884 ("media: omap2: omapfb: allow building it with COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: Distinguish between interlaced and progressive modes

[ Upstream commit 1ba0a59cea41ea05fda92daaf2a2958a2246b9cf ]

I discovered the problem when developing a frame buffer driver for the
PlayStation 2 (not yet merged), using the following video modes for the
PlayStation 3 in drivers/video/fbdev/ps3fb.c:

    }, {
        /* 1080if */
        "1080if", 50, 1920, 1080, 13468, 148, 484, 36, 4, 88, 5,
        FB_SYNC_BROADCAST, FB_VMODE_INTERLACED
    }, {
        /* 1080pf */
        "1080pf", 50, 1920, 1080, 6734, 148, 484, 36, 4, 88, 5,
        FB_SYNC_BROADCAST, FB_VMODE_NONINTERLACED
    },

In ps3fb_probe, the mode_option module parameter is used with fb_find_mode
but it can only select the interlaced variant of 1920x1080 since the loop
matching the modes does not take the difference between interlaced and
progressive modes into account.

In short, without the patch, progressive 1920x1080 cannot be chosen as a
mode_option parameter since fb_find_mode (falsely) thinks interlace is a
perfect match.

Signed-off-by: Fredrik Noring <noring@nocrew.org>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
[b.zolnierkie: updated patch description]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

video: fbdev: pxafb: clear allocated memory for video modes

[ Upstream commit b951d80aaf224b1f774e10def672f5e37488e4ee ]

When parsing the video modes from DT properties, make sure to zero out
memory before using it. This is important because not all fields in the mode
struct are explicitly initialized, even though they are used later on.

Fixes: 420a488278e86 ("video: fbdev: pxafb: initial devicetree conversion")
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf powerpc: Fix callchain ip filtering when return address is in a register

[ Upstream commit 9068533e4f470daf2b0f29c71d865990acd8826e ]

For powerpc64, perf will filter out the second entry in the callchain,
i.e. the LR value, if the return address of the function corresponding
to the probed location has already been saved on its caller's stack.

The state of the return address is determined using debug information.
At any point within a function, if the return address is already saved
somewhere, a DWARF expression can tell us about its location. If the
return address in still in LR only, no DWARF expression would exist.

Typically, the instructions in a function's prologue first copy the LR
value to R0 and then pushes R0 on to the stack. If LR has already been
copied to R0 but R0 is yet to be pushed to the stack, we can still get a
DWARF expression that says that the return address is in R0. This is
indicating that getting a DWARF expression for the return address does
not guarantee the fact that it has already been saved on the stack.

This can be observed on a powerpc64le system running Fedora 27 as shown
below.

  # objdump -d /usr/lib64/libc-2.26.so | less
  ...
  000000000015af20 <inet_pton>:
    15af20:       0b 00 4c 3c     addis   r2,r12,11
    15af24:       e0 c1 42 38     addi    r2,r2,-15904
    15af28:       a6 02 08 7c     mflr    r0
    15af2c:       f0 ff c1 fb     std     r30,-16(r1)
    15af30:       f8 ff e1 fb     std     r31,-8(r1)
    15af34:       78 1b 7f 7c     mr      r31,r3
    15af38:       78 23 83 7c     mr      r3,r4
    15af3c:       78 2b be 7c     mr      r30,r5
    15af40:       10 00 01 f8     std     r0,16(r1)
    15af44:       c1 ff 21 f8     stdu    r1,-64(r1)
    15af48:       28 00 81 f8     std     r4,40(r1)
  ...

  # readelf --debug-dump=frames-interp /usr/lib64/libc-2.26.so | less
  ...
  00027024 0000000000000024 00027028 FDE cie=00000000 pc=000000000015af20..000000000015af88
     LOC           CFA      r30   r31   ra
  000000000015af20 r1+0     u     u     u
  000000000015af34 r1+0     c-16  c-8   r0
  000000000015af48 r1+64    c-16  c-8   c+16
  000000000015af5c r1+0     c-16  c-8   c+16
  000000000015af78 r1+0     u     u
  ...

  # perf probe -x /usr/lib64/libc-2.26.so -a inet_pton+0x18
  # perf record -e probe_libc:inet_pton -g ping -6 -c 1 ::1
  # perf script

Before:

  ping  2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38)
              7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so)
              7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so)
                 12f152d70 _init+0xbfc (/usr/bin/ping)
              7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
              7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
                         0 [unknown] ([unknown])

After:

  ping  2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38)
              7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so)
              7fff7e26fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so)
              7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so)
                 12f152d70 _init+0xbfc (/usr/bin/ping)
              7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
              7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
                         0 [unknown] ([unknown])

Reported-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Maynard Johnson <maynard@us.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/66e848a7bdf2d43b39210a705ff6d828a0865661.1530724939.git.sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev/via: fix defined but not used warning

[ Upstream commit b6566b47a67e07fdca44cf51abb14e2fbe17d3eb ]

Fix a build warning in viafbdev.c when CONFIG_PROC_FS is not enabled
by marking the unused function as __maybe_unused.

../drivers/video/fbdev/via/viafbdev.c:1471:12: warning: 'viafb_sup_odev_proc_show' defined but not used [-Wunused-function]

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

video: goldfishfb: fix memory leak on driver remove

[ Upstream commit 5958fde72d04e7b8c6de3669d1f794a90997e3eb ]

goldfish_fb_probe() allocates memory for fb, but goldfish_fb_remove() does
not have deallocation of fb, which leads to memory leak on probe/remove.

The patch adds deallocation into goldfish_fb_remove().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Cc: Aleksandar Markovic <aleksandar.markovic@mips.com>
Cc: Miodrag Dinic <miodrag.dinic@mips.com>
Cc: Goran Ferenc <goran.ferenc@mips.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf tools: Fix struct comm_str removal crash

[ Upstream commit 46b3722cc7765582354488da633aafffcb138458 ]

We occasionaly hit following assert failure in 'perf top', when processing the
/proc info in multiple threads.

  perf: ...include/linux/refcount.h:109: refcount_inc:
        Assertion `!(!refcount_inc_not_zero(r))' failed.

The gdb backtrace looks like this:

  [Switching to Thread 0x7ffff11ba700 (LWP 13749)]
  0x00007ffff50839fb in raise () from /lib64/libc.so.6
  (gdb)
  #0  0x00007ffff50839fb in raise () from /lib64/libc.so.6
  #1  0x00007ffff5085800 in abort () from /lib64/libc.so.6
  #2  0x00007ffff507c0da in __assert_fail_base () from /lib64/libc.so.6
  #3  0x00007ffff507c152 in __assert_fail () from /lib64/libc.so.6
  #4  0x0000000000535373 in refcount_inc (r=0x7fffdc009be0)
      at ...include/linux/refcount.h:109
  #5  0x00000000005354f1 in comm_str__get (cs=0x7fffdc009bc0)
      at util/comm.c:24
  #6  0x00000000005356bd in __comm_str__findnew (str=0x7fffd000b260 ":2",
      root=0xbed5c0 <comm_str_root>) at util/comm.c:72
  #7  0x000000000053579e in comm_str__findnew (str=0x7fffd000b260 ":2",
      root=0xbed5c0 <comm_str_root>) at util/comm.c:95
  #8  0x000000000053582e in comm__new (str=0x7fffd000b260 ":2",
      timestamp=0, exec=false) at util/comm.c:111
  #9  0x00000000005363bc in thread__new (pid=2, tid=2) at util/thread.c:57
  #10 0x0000000000523da0 in ____machine__findnew_thread (machine=0xbfde38,
      threads=0xbfdf28, pid=2, tid=2, create=true) at util/machine.c:457
  #11 0x0000000000523eb4 in __machine__findnew_thread (machine=0xbfde38,
  ...

The failing assertion is this one:

  REFCOUNT_WARN(!refcount_inc_not_zero(r), ...

The problem is that we keep global comm_str_root list, which
is accessed by multiple threads during the 'perf top' startup
and following 2 paths can race:

  thread 1:
    ...
    thread__new
      comm__new
        comm_str__findnew
          down_write(&comm_str_lock);
          __comm_str__findnew
            comm_str__get

  thread 2:
    ...
    comm__override or comm__free
      comm_str__put
        refcount_dec_and_test
          down_write(&comm_str_lock);
          rb_erase(&cs->rb_node, &comm_str_root);

Because thread 2 first decrements the refcnt and only after then it removes the
struct comm_str from the list, the thread 1 can find this object on the list
with refcnt equls to 0 and hit the assert.

This patch fixes the thread 1 __comm_str__findnew path, by ignoring objects
that already dropped the refcnt to 0. For the rest of the objects we take the
refcnt before comparing its name and release it afterwards with comm_str__put,
which can also release the object completely.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Lukasz Odzioba <lukasz.odzioba@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20180720101740.GA27176@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: omapfb: off by one in omapfb_register_client()

[ Upstream commit 5ec1ec35b2979b59d0b33381e7c9aac17e159d16 ]

The omapfb_register_client[] array has OMAPFB_PLANE_NUM elements so the
> should be >= or we are one element beyond the end of the array.

Fixes: 8b08cf2b64f5 ("OMAP: add TI OMAP framebuffer driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf tests: Fix record+probe_libc_inet_pton.sh to ensure cleanups

[ Upstream commit 83e3b6d73e66a10088f362b08b99c36fec3a14e7 ]

If there is a mismatch in the perf script output, this test fails and
exits before the event and temporary files created during its execution
are cleaned up.

This can be observed on a powerpc64 system running Fedora 27 as shown
below.

  # perf test -v "probe libc's inet_pton & backtrace it with ping"

  62: probe libc's inet_pton & backtrace it with ping       :
  --- start ---
  test child forked, pid 18655
  ping 18674 [013] 24511.496995: probe_libc:inet_pton: (7fffa6b423b0)
  7fffa6b423b0 __GI___inet_pton+0x0 (/usr/lib64/power8/libc-2.26.so)
  7fffa6af90dc gaih_inet.constprop.7+0xf4c (/usr/lib64/power8/libc-2.26.so)
  FAIL: expected backtrace entry "getaddrinfo\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/power8/libc-2.26.so\)$" got "7fffa6af90dc gaih_inet.constprop.7+0xf4c (/usr/lib64/power8/libc-2.26.so)"
  test child finished with -1
  ---- end ----
  probe libc's inet_pton & backtrace it with ping: FAILED!

  # ls /tmp/expected.* /tmp/perf.data.* /tmp/perf.script.*

  /tmp/expected.u31  /tmp/perf.data.Pki  /tmp/perf.script.Bhs

  # perf probe --list

    probe_libc:inet_pton (on __inet_pton@resolv/inet_pton.c in /usr/lib64/power8/libc-2.26.so)

Cleanup of the event and the temporary files are now ensured by allowing
the cleanup code to be executed even if the lines from the backtrace do
not match their expected patterns instead of simply exiting from the
point of failure.

Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/ce9fb091dd3028fba8749a1a267cfbcb264bbfb1.1530724939.git.sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf tests: Fix record+probe_libc_inet_pton.sh when event exists

[ Upstream commit 60089e42d38438772e2f83334e3e5b7497009366 ]

If the event 'probe_libc:inet_pton' already exists, this test fails and
deletes the existing event before exiting. This will then pass for any
subsequent executions.

Instead of skipping to deleting the existing event because of failing to
add a new event, a duplicate event is now created and the script
continues with the usual checks. Only the new duplicate event that is
created at the beginning of the test is deleted as a part of the
cleanups in the end. All existing events remain as it is.

This can be observed on a powerpc64 system running Fedora 27 as shown
below.

  # perf probe -x /usr/lib64/power8/libc-2.26.so -a inet_pton

  Added new event:
    probe_libc:inet_pton (on inet_pton in /usr/lib64/power8/libc-2.26.so)

Before:

  # perf test -v "probe libc's inet_pton & backtrace it with ping"

  62: probe libc's inet_pton & backtrace it with ping       :
  --- start ---
  test child forked, pid 21302
  test child finished with -1
  ---- end ----
  probe libc's inet_pton & backtrace it with ping: FAILED!

  # perf probe --list

After:

  # perf test -v "probe libc's inet_pton & backtrace it with ping"

  62: probe libc's inet_pton & backtrace it with ping       :
  --- start ---
  test child forked, pid 21490
  ping 21513 [035] 39357.565561: probe_libc:inet_pton_1: (7fffa4c623b0)
  7fffa4c623b0 __GI___inet_pton+0x0 (/usr/lib64/power8/libc-2.26.so)
  7fffa4c190dc gaih_inet.constprop.7+0xf4c (/usr/lib64/power8/libc-2.26.so)
  7fffa4c19c4c getaddrinfo+0x15c (/usr/lib64/power8/libc-2.26.so)
  111d93c20 main+0x3e0 (/usr/bin/ping)
  test child finished with 0
  ---- end ----
  probe libc's inet_pton & backtrace it with ping: Ok

  # perf probe --list

    probe_libc:inet_pton (on __inet_pton@resolv/inet_pton.c in /usr/lib64/power8/libc-2.26.so)

Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/e11fecff96e6cf4c65cdbd9012463513d7b8356c.1530724939.git.sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf tests: Fix record+probe_libc_inet_pton.sh for powerpc64

[ Upstream commit 3eae52f842329a95f8549124079518231c0daba8 ]

For powerpc64, this test currently fails due to a mismatch in the
expected output.

This can be observed on a powerpc64le system running Fedora 27 as shown
below.

  # perf test -v "probe libc's inet_pton & backtrace it with ping"

Before:

  62: probe libc's inet_pton & backtrace it with ping       :
  --- start ---
  test child forked, pid 23948
  ping 23965 [003] 71136.075084: probe_libc:inet_pton: (7fff996aaf28)
  7fff996aaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so)
  7fff9965fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so)
  FAIL: expected backtrace entry 2 "getaddrinfo\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/libc-2.26.so\)$" got "7fff9965fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so)"
  test child finished with -1
  ---- end ----
  probe libc's inet_pton & backtrace it with ping: FAILED!

After:

  62: probe libc's inet_pton & backtrace it with ping       :
  --- start ---
  test child forked, pid 24638
  ping 24655 [001] 71208.525396: probe_libc:inet_pton: (7fffa245af28)
  7fffa245af28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so)
  7fffa240fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so)
  7fffa24105b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so)
  138d52d70 main+0x3e0 (/usr/bin/ping)
  test child finished with 0
  ---- end ----
  probe libc's inet_pton & backtrace it with ping: Ok

Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Maynard Johnson <maynard@us.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Fixes: e07d585e2454 ("perf tests: Switch trace+probe_libc_inet_pton to use record")
Link: http://lkml.kernel.org/r/49621ec5f37109f0655e5a8c32287ad68d85a1e5.1530724939.git.sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf tools: Synthesize GROUP_DESC feature in pipe mode

[ Upstream commit e8fedff1cc729fd227924305152ccc6f580e8c83 ]

Stephan reported, that pipe mode does not carry the group information
and thus the piped report won't display the grouped output for following
command:

  # perf record -e '{cycles,instructions,branches}' -a sleep 4 | perf report

It has no idea about the group setup, so it will display events
separately:

  # Overhead  Command          Shared Object             ...
  # ........  ...............  .......................
  #
       6.71%  swapper          [kernel.kallsyms]
       2.28%  offlineimap      libpython2.7.so.1.0
       0.78%  perf             [kernel.kallsyms]
  ...

Fix GROUP_DESC feature record to be synthesized in pipe mode, so the
report output is grouped if there are groups defined in record:

  #                 Overhead  Command          Shared    ...
  # ........................  ...............  .......
  #
       7.57%   0.16%   0.30%  swapper          [kernel
       1.87%   3.15%   2.46%  offlineimap      libpyth
       1.33%   0.00%   0.00%  perf             [kernel
  ...

Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180712135202.14774-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gfs2: Don't reject a supposedly full bitmap if we have blocks reserved

[ Upstream commit e79e0e1428188b24c3b57309ffa54a33c4ae40c4 ]

Before this patch, you could get into situations like this:

1. Process 1 searches for X free blocks, finds them, makes a reservation
2. Process 2 searches for free blocks in the same rgrp, but now the
   bitmap is full because process 1's reservation is skipped over.
   So it marks the bitmap as GBF_FULL.
3. Process 1 tries to allocate blocks from its own reservation, but
   since the GBF_FULL bit is set, it skips over the rgrp and searches
   elsewhere, thus not using its own reservation.

This patch adds an additional check to allow processes to use their
own reservations.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf test: Fix subtest number when showing results

[ Upstream commit 9ef0112442bdddef5fb55adf20b3a5464b33de75 ]

Perf test 40 for example has several subtests numbered 1-4 when
displaying the start of the subtest. When the subtest results
are displayed the subtests are numbered 0-3.

Use this command to generate trace output:

  [root@s35lp76 perf]# ./perf test -Fv 40 2>/tmp/bpf1

Fix this by adjusting the subtest number when show the
subtest result.

Output before:

  [root@s35lp76 perf]# egrep '(^40\.[0-4]| subtest [0-4]:)' /tmp/bpf1
  40.1: Basic BPF filtering                                 :
  BPF filter subtest 0: Ok
  40.2: BPF pinning                                         :
  BPF filter subtest 1: Ok
  40.3: BPF prologue generation                             :
  BPF filter subtest 2: Ok
  40.4: BPF relocation checker                              :
  BPF filter subtest 3: Ok
  [root@s35lp76 perf]#

Output after:

  root@s35lp76 ~]# egrep '(^40\.[0-4]| subtest [0-4]:)' /tmp/bpf1
  40.1: Basic BPF filtering                                 :
  BPF filter subtest 1: Ok
  40.2: BPF pinning                                         :
  BPF filter subtest 2: Ok
  40.3: BPF prologue generation                             :
  BPF filter subtest 3: Ok
  40.4: BPF relocation checker                              :
  BPF filter subtest 4: Ok
  [root@s35lp76 ~]#

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180724134858.100644-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: ov5645: Supported external clock is 24MHz

[ Upstream commit 4adb0a0432f489c5eb802b33dae7737f69e6fd7a ]

The external clock frequency was set to 23.88MHz by mistake
because of a platform which cannot get closer to 24MHz.
The supported by the driver external clock is 24MHz so
set it correctly and also fix the values of the pixel
clock and link clock.
However allow 1% tolerance to the external clock as this
difference is small enough to be insignificant.

Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd/maps: fix solutionengine.c printk format warnings

[ Upstream commit 1d25e3eeed1d987404e2d2e451eebac8c15cecc1 ]

Fix 2 printk format warnings (this driver is currently only used by
arch/sh/) by using "%pap" instead of "%lx".

Fixes these build warnings:

../drivers/mtd/maps/solutionengine.c: In function 'init_soleng_maps':
../include/linux/kern_levels.h:5:18: warning: format '%lx' expects argument of type 'long unsigned int', but argument 2 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=]
../drivers/mtd/maps/solutionengine.c:62:54: note: format string is defined here
  printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n",
                                                  ~~~~^
                                                  %08x
../include/linux/kern_levels.h:5:18: warning: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=]
../drivers/mtd/maps/solutionengine.c:62:72: note: format string is defined here
  printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n",
                                                                    ~~~~^
                                                                    %08x

Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: linux-mtd@lists.infradead.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/ipoib: Fix error return code in ipoib_dev_init()

[ Upstream commit 99a7e2bf704d64c966dfacede1ba2d9b47cb676e ]

Fix to return a negative error code from the ipoib_neigh_hash_init()
error handling case instead of 0, as done elsewhere in this function.

Fixes: 515ed4f3aab4 ("IB/IPoIB: Separate control and data related initializations")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: allow max_discard_segments to be stacked

[ Upstream commit 42c9cdfe1e11e083dceb0f0c4977b758cf7403b9 ]

Set max_discard_segments to USHRT_MAX in blk_set_stacking_limits() so
that blk_stack_limits() can stack up this limit for stacked devices.

before:

$ cat /sys/block/nvme0n1/queue/max_discard_segments
256
$ cat /sys/block/dm-0/queue/max_discard_segments
1

after:

$ cat /sys/block/nvme0n1/queue/max_discard_segments
256
$ cat /sys/block/dm-0/queue/max_discard_segments
256

Fixes: 1e739730c5b9e ("block: optionally merge discontiguous discard bios into a single request")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/rxe: Drop QP0 silently

[ Upstream commit 536ca245c512aedfd84cde072d7b3ca14b6e1792 ]

According to "Annex A16: RDMA over Converged Ethernet (RoCE)":

A16.4.3 MANAGEMENT INTERFACES

As defined in the base specification, a special Queue Pair, QP0 is defined
solely for communication between subnet manager(s) and subnet management
agents. Since such an IB-defined subnet management architecture is outside
the scope of this annex, it follows that there is also no requirement that
a port which conforms to this annex be associated with a QP0. Thus, for
end nodes designed to conform to this annex, the concept of QP0 is
undefined and unused for any port connected to an Ethernet network.

CA16-8: A packet arriving at a RoCE port containing a BTH with the
destination QP field set to QP0 shall be silently dropped.

Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: videobuf2-core: check for q->error in vb2_core_qbuf()

[ Upstream commit b509d733d337417bcb7fa4a35be3b9a49332b724 ]

The vb2_core_qbuf() function didn't check if q->error was set. It is
checked in __buf_prepare(), but that function isn't called if the buffer
was already prepared before with VIDIOC_PREPARE_BUF.

So check it at the start of vb2_core_qbuf() as well.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: ath79: fix system restart

[ Upstream commit f8a7bfe1cb2c1ebfa07775c9c8ac0ad3ba8e5ff5 ]

This patch disables irq on reboot to fix hang issues that were observed
due to pending interrupts.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19913/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: pl330: fix irq race with terminate_all

[ Upstream commit e49756544a21f5625b379b3871d27d8500764670 ]

In pl330_update() when checking if a channel has been aborted, the
channel's lock is not taken, only the overall pl330_dmac lock.  But in
pl330_terminate_all() the aborted flag (req_running==-1) is set under
the channel lock and not the pl330_dmac lock.

With threaded interrupts, this leads to a potential race:

    pl330_terminate_all         pl330_update
    -------------------         ------------
    lock channel
                                entry
    lock pl330
    _stop channel
    unlock pl330
                                lock pl330
                                check req_running != -1
    req_running = -1
                                _start channel

Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>