tcg/mips: Unify TCG_GUEST_BASE_REG tests

In tcg_out_qemu_ld/st, we already check for guest_base matching int16_t.
Mirror that when setting up TCG_GUEST_BASE_REG in the prologue.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/mips: Move TCG_GUEST_BASE_REG to S7

No functional change; just moving the saved reserved regs to the end.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/mips: Move TCG_AREG0 to S8

No functional change; just moving the saved reserved regs to the end.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'pull-vfio-20230524' of https://github.com/legoater/qemu into staging

vfio queue:

* Fix for a memory corruption due to an extra free
* Fix for a compile breakage

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmRtyB4ACgkQUaNDx8/7
# 7KFQvRAAhexL/Q8rWM8og+VESL5gPlpxDhWCI+l76+YJqQzZkgebwZ5rw920f8EG
# bRs5AAk8fPTX/qKKq/JkYMmQwpM2jo8W4elcNumm44WAG7hDwd1LQ3nAZeOcvgU0
# jQ1IwRYcgNo+oOTN9b7GhePQK27OraliLUrf/sBGUWvbdAttVc2pcB91CMur0Dxb
# 9KK2vEA4MJ9B8zf2/ZkaK6Z+28GsratR7803Nvv25rm5sP3VBb9w0TnKZAOmaHLv
# X5Tz8yjNvQxxzB9SzgOK6yMtnrp42ArVC5u2aDa33uzSWUeFiTF1HEFeGAps2nJg
# 8tSNo0fTKhznrVR3q2pyxC05Dp+jmKicrmivc26iBdAWAUxQYX44UQoLYD5ISdti
# nlSE+Is+0ZE5E2tHE9yAOPa4rrXHNBqpueu+VMPbYMyVEqzblP7twYe6HkGPYhrD
# zbx/ABZAAGOf+3YmyL1yQrCc0WyJ2lHDySQt/llMrhkBTCHGEF8yjfWFypluZFWX
# X7Mb0YZP0qPpFsV3TDcrqV3onaFSNehp2EJs2EJAa/DeUNbnKlz4LiYBzZE95egb
# 9PGrLnB5w1Vlp44H+ctrnYj55TnspHT+Qqwvhkr/vOMupZukbGus0VFIU2IDrh2g
# qEqhaigwxfVyZ1Eqwti4IgX8RVX8bW43slR33aD6vsO7jpiP2Pk=
# =TA2V
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 24 May 2023 01:17:34 AM PDT
# gpg:                using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B  0B60 51A3 43C7 CFFB ECA1

* tag 'pull-vfio-20230524' of https://github.com/legoater/qemu:
  util/vfio-helpers: Use g_file_read_link()
  vfio/pci: Fix a use-after-free issue

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Add Kubernetes runner configuration

Custom values for the gitlab-runner Helm chart.
See https://wiki.qemu.org/Testing/CI/KubernetesRunners.

Signed-off-by: Camilla Conte <cconte@redhat.com>
Message-Id: <20230522174153.46801-6-cconte@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Add CI variable RUNNER_TAG

This allows to set a job tag dynamically.
We need this to be able to select the Kubernetes runner.
See https://wiki.qemu.org/Testing/CI/KubernetesRunners.

Signed-off-by: Camilla Conte <cconte@redhat.com>
Message-Id: <20230522174153.46801-5-cconte@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Add loop over docker info

Wait for docker info to return successfuly to ensure that
the docker server (daemon) started.
This is needed for jobs running on Kubernetes.
See https://wiki.qemu.org/Testing/CI/KubernetesRunners.

Signed-off-by: Camilla Conte <cconte@redhat.com>
Message-Id: <20230522174153.46801-4-cconte@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Use docker "stable" tag

Use the same tag in all jobs.

Signed-off-by: Camilla Conte <cconte@redhat.com>
Message-Id: <20230522174153.46801-3-cconte@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Remove redundant CI variables

These are not needed when using gitlab.com shared runners.

Signed-off-by: Camilla Conte <cconte@redhat.com>
Message-Id: <20230522174153.46801-2-cconte@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

util/vfio-helpers: Use g_file_read_link()

When _FORTIFY_SOURCE=2, glibc version is 2.35, and GCC version is
12.1.0, the compiler complains as follows:

In file included from /usr/include/features.h:490,
                 from /usr/include/bits/libc-header-start.h:33,
                 from /usr/include/stdint.h:26,
                 from /usr/lib/gcc/aarch64-unknown-linux-gnu/12.1.0/include/stdint.h:9,
                 from /home/alarm/q/var/qemu/include/qemu/osdep.h:94,
                 from ../util/vfio-helpers.c:13:
In function 'readlink',
    inlined from 'sysfs_find_group_file' at ../util/vfio-helpers.c:116:9,
    inlined from 'qemu_vfio_init_pci' at ../util/vfio-helpers.c:326:18,
    inlined from 'qemu_vfio_open_pci' at ../util/vfio-helpers.c:517:9:
/usr/include/bits/unistd.h:119:10: error: argument 2 is null but the corresponding size argument 3 value is 4095 [-Werror=nonnull]
  119 |   return __glibc_fortify (readlink, __len, sizeof (char),
      |          ^~~~~~~~~~~~~~~

This error implies the allocated buffer can be NULL. Use
g_file_read_link(), which allocates buffer automatically to avoid the
error.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

vfio/pci: Fix a use-after-free issue

vbasedev->name is freed wrongly which leads to garbage VFIO trace log.
Fix it by allocating a dup of vbasedev->name and then free the dup.

Fixes: 2dca1b37a760 ("vfio/pci: add support for VF token")
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

Merge tag 'pull-tcg-20230523-3' of https://gitlab.com/rth7680/qemu into staging

util: Host cpu detection for x86 and aa64
util: Use cpu detection for bufferiszero
migration: Use cpu detection for xbzrle
tcg: Replace and remove cpu_atomic_{ld,st}o*
host/include: Split qemu/atomic128.h
tcg: Remove DEBUG_DISAS
tcg: Remove USE_TCG_OPTIMIZATIONS

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmRtbwAdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8xlgf7B/RnVG7u7Hjndr6h
# fH07ujjElAivs+H05S0GGbQYpSNlqVv8PzXT2olJTAe15ryb537dCkqxyKW53vgb
# pUWzZf9Zy8XfN48W5V91dSKQE3gm5wBlOM6LI85F8XrIQyjZqkHti+rw3GxsamNL
# 8n2euOR0vx/jculBRxvZUAJDzb/0shN583mC5+wX/KInCHiNmMC6sCggyd5bpFJZ
# 1wqWwrUCqJ0KAAYKd9WrIKt6QwAX3kUDiBQPa1g+psBjZ1CYQ4lqZZn9uYQ4hEtG
# yBnT0ER2LOBQaKXJ0BrdG5c/mUNX7WkLBDTb+QjGGkfPc/bHIirXqeFzuyrXahg8
# kY155w==
# =XH8Z
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 May 2023 06:57:20 PM PDT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]

* tag 'pull-tcg-20230523-3' of https://gitlab.com/rth7680/qemu: (28 commits)
  tcg: Remove USE_TCG_OPTIMIZATIONS
  tcg: Remove DEBUG_DISAS
  qemu/atomic128: Add runtime test for FEAT_LSE2
  qemu/atomic128: Improve cmpxchg fallback for atomic16_set
  tcg: Split out tcg/debug-assert.h
  accel/tcg: Correctly use atomic128.h in ldst_atomicity.c.inc
  qemu/atomic128: Split atomic16_read
  accel/tcg: Eliminate #if on HAVE_ATOMIC128 and HAVE_CMPXCHG128
  accel/tcg: Remove prot argument to atomic_mmu_lookup
  accel/tcg: Remove cpu_atomic_{ld,st}o_*_mmu
  target/s390x: Always use cpu_atomic_cmpxchgl_be_mmu in do_csst
  target/s390x: Use cpu_{ld,st}*_mmu in do_csst
  accel/tcg: Unify cpu_{ld,st}*_{be,le}_mmu
  target/s390x: Use tcg_gen_qemu_{ld,st}_i128 for LPQ, STPQ
  target/ppc: Use tcg_gen_qemu_{ld,st}_i128 for LQARX, LQ, STQ
  include/qemu: Move CONFIG_ATOMIC128_OPT handling to atomic128.h
  meson: Fix detect atomic128 support with optimization
  include/host: Split out atomic128-ldst.h
  include/host: Split out atomic128-cas.h
  util: Add cpuinfo-aarch64.c
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Remove USE_TCG_OPTIMIZATIONS

This is always defined, and the optimization pass is
essential to producing reasonable code.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Remove DEBUG_DISAS

This had been set since the beginning, is never undefined,
and it would seem to be harmful to debugging to do so.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

qemu/atomic128: Add runtime test for FEAT_LSE2

With FEAT_LSE2, load and store of int128 is directly supported.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

qemu/atomic128: Improve cmpxchg fallback for atomic16_set

Use __sync_bool_compare_and_swap_16 to control the loop,
rather than a separate comparison.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Split out tcg/debug-assert.h

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Correctly use atomic128.h in ldst_atomicity.c.inc

Remove the locally defined load_atomic16 and store_atomic16,
along with HAVE_al16 and HAVE_al16_fast in favor of the
routines defined in atomic128.h.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

qemu/atomic128: Split atomic16_read

Create both atomic16_read_ro and atomic16_read_rw.
Previously we pretended that we had atomic16_read in system mode,
because we "know" that all ram is always writable to the host.
Now, expose read-only and read-write versions all of the time.

For aarch64, do not fall back to __atomic_read_16 even if
supported by the compiler, to work around a clang bug.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Eliminate #if on HAVE_ATOMIC128 and HAVE_CMPXCHG128

These symbols will shortly become dynamic runtime tests and
therefore not appropriate for the preprocessor.  Use the
matching CONFIG_* symbols for that purpose.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Remove prot argument to atomic_mmu_lookup

Now that load/store are gone, we're always passing
PAGE_READ | PAGE_WRITE for RMW atomic operations.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Remove cpu_atomic_{ld,st}o_*_mmu

Atomic load/store of 128-byte quantities is now handled
by cpu_{ld,st}16_mmu.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/s390x: Always use cpu_atomic_cmpxchgl_be_mmu in do_csst

Eliminate the CONFIG_USER_ONLY specialization.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/s390x: Use cpu_{ld,st}*_mmu in do_csst

Use cpu_ld16_mmu and cpu_st16_mmu to eliminate the special case,
and change all of the *_data_ra functions to match.

Note that we check the alignment of both compare and store
pointers at the top of the function, so MO_ALIGN* may be
safely removed from the individual memory operations.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Unify cpu_{ld,st}*_{be,le}_mmu

With the current structure of cputlb.c, there is no difference
between the little-endian and big-endian entry points, aside
from the assert.  Unify the pairs of functions.

The only use of the functions with explicit endianness was in
target/sparc64, and that was only to satisfy the assert: the
correct endianness is already built into memop.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/s390x: Use tcg_gen_qemu_{ld,st}_i128 for LPQ, STPQ

No need to roll our own, as this is now provided by tcg.
This was the last use of retxl, so remove that too.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/ppc: Use tcg_gen_qemu_{ld,st}_i128 for LQARX, LQ, STQ

No need to roll our own, as this is now provided by tcg.
This was the last use of retxl, so remove that too.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

include/qemu: Move CONFIG_ATOMIC128_OPT handling to atomic128.h

Not only the routines in ldst_atomicity.c.inc need markup,
but also the ones in the headers.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

meson: Fix detect atomic128 support with optimization

Silly typo: sizeof(16) != 16.

Fixes: e61f1efeb730 ("meson: Detect atomic128 support with optimization")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

include/host: Split out atomic128-ldst.h

Separates the aarch64-specific portion into its own file.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

include/host: Split out atomic128-cas.h

Separates the aarch64-specific portion into its own file.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

util: Add cpuinfo-aarch64.c

Move the code from tcg/.  The only use of these bits so far
is with respect to the atomicity of tcg operations.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

migration: Build migration_files once

The items in migration_files are built for libmigration and included
info softmmu_ss from there; no need to also include them directly.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

migration/xbzrle: Use i386 host/cpuinfo.h

Perform the function selection once, and only if CONFIG_AVX512_OPT
is enabled.  Centralize the selection to xbzrle.c, instead of
spreading the init across 3 files.

Remove xbzrle-bench.c.  The benefit of being able to benchmark
the different implementations is less important than not peeking
into the internals of the implementation.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

migration/xbzrle: Shuffle function order

Place the CONFIG_AVX512BW_OPT block at the top,
which will aid function selection in the next patch.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

util/bufferiszero: Use i386 host/cpuinfo.h

Use cpuinfo_init() during init_accel(), and the variable cpuinfo
during test_buffer_is_zero_next_accel().  Adjust the logic that
cycles through the set of accelerators for testing.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/i386: Use host/cpuinfo.h

Use the CPUINFO_* bits instead of the individual boolean
variables that we had been using.  Remove all of the init
code that was moved over to cpuinfo-i386.c.

Note that have_avx512* check both AVX512{F,VL}, as we had
previously done during tcg_target_init.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

util: Add i386 CPUINFO_ATOMIC_VMOVDQU

Add a bit to indicate when VMOVDQU is also atomic if aligned.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

util: Add cpuinfo-i386.c

Add cpuinfo.h for i386 and x86_64, and the initialization
for that in util/.  Populate that with a slightly altered
copy of the tcg host probing code.  Other uses of cpuid.h
will be adjusted one patch at a time.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

util: Introduce host-specific cpuinfo.h

The entire contents of the header is host-specific, but the
existence of such a header is not, which could prevent some
host specific ifdefs at the top of the file for the include.

Add host/include/{arch,generic} to the project arguments.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'mem-2023-05-23' of https://github.com/davidhildenbrand/qemu into staging

Hi,

"Host Memory Backends" and "Memory devices" queue ("mem"):
- New "offset" option for memory-backend-file

# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEG9nKrXNcTDpGDfzKTd4Q9wD/g1oFAmRs0h4RHGRhdmlkQHJl
# ZGhhdC5jb20ACgkQTd4Q9wD/g1r+9BAAsOtioPE3y1xBNyLhO+sbBK4w0Xf5ABRF
# QXfrSPfz0IaThzg33o7eCUMrbC5UmRyeq1aeGWFNo1RevgKxeFFlcVdvUFDeJL5R
# vS94ZzowpJ6lJvpgP8iOMmWY2nztWpIfE92nLKIeze5nlbnMwKn8ZlVWkqFialkT
# Ro1AI/ZmyvUDJj8UXQEW+p1NWE4m59TH5atQqBG3kkU7RJTU4DKVQtKbOysEwIhr
# A4y0nvgMeHLlEPUSqcERe9wOqVENdlsON6vms5AILN4/TmjSe3BHINjH9NOFveiO
# wgquSt0ystPAY0MXRPXgg6XwL1AAFR9cJt/rOZiBYpqeZHAmKOsi5qUXyv2dmXhw
# RaPV041g2RJZiFgH1N4v4aN0j8AYbtHSYYsP1snfULa8VfePPquY/UxyPaK28WHn
# on5VV5nBScYNVtKI90Gci4jxGStnM0zG503GQ26pt85+35866zertBqsTTPIO2Mm
# 7+YSkedSzmIt11GH0rqdghQte6qj1ED8lGO626s5m+qbGL9WuBXYCG9yzl5yTLsz
# I27si7Fh/Y0QQHs3GEAH2tsi89tphElnZksdj4P1/uPDIDnTF7d5I+tlUiQXHNaw
# rXAV76q4j0GgbBm4Cp1iMTUNxALes4aOG7oRMeFxvVWy0fqmfAvKhDVILGkUlYTr
# C82GUJ5x3mc=
# =izHP
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 May 2023 07:47:58 AM PDT
# gpg:                using RSA key 1BD9CAAD735C4C3A460DFCCA4DDE10F700FF835A
# gpg:                issuer "david@redhat.com"
# gpg: Good signature from "David Hildenbrand <david@redhat.com>" [unknown]
# gpg:                 aka "David Hildenbrand <davidhildenbrand@gmail.com>" [undefined]
# gpg:                 aka "David Hildenbrand <hildenbr@in.tum.de>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 1BD9 CAAD 735C 4C3A 460D  FCCA 4DDE 10F7 00FF 835A

* tag 'mem-2023-05-23' of https://github.com/davidhildenbrand/qemu:
  hostmem-file: add offset option

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

hostmem-file: add offset option

Add an option for hostmem-file to start the memory object at an offset
into the target file. This is useful if multiple memory objects reside
inside the same target file, such as a device node.

In particular, it's useful to map guest memory directly into /dev/mem
for experimentation.

To make this work consistently, also fix up all places in QEMU that
expect fd offsets to be 0.

Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20230403221421.60877-1-graf@amazon.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>

Merge tag 'net-pull-request' of https://github.com/jasowang/qemu into staging

# -----BEGIN PGP SIGNATURE-----
# Version: GnuPG v1
#
# iQEcBAABAgAGBQJkbGmXAAoJEO8Ells5jWIR4ogH/R5+IgkZi1dwN/IxCpzTIc5H
# l5ncKK6TCqKCfgpFnFFLNKhcDqDczq4LhO42s/vnuOF8vIXcUVhLAz0HULARb46o
# p/7Ufn1k8Zg/HGtWwIW+9CcTkymsHzTOwFcTRFiCjpdkjaW1Wprb2q968f0Px8eS
# cKqC5xln8U+s02KWQMHlJili6BTPuw1ZNnYV3iq/81Me96WOtPd8c8ZSF4aVR2AB
# Kqah+BBOnk4p4kg9Gs0OvM4TffEBrsab8iu4s6SSQGA6ymCWY6GeCX0Ik4u9P1yE
# 6NtKLixBPO4fqLwWxWuKVJmaLKmuEd/FjZXWwITx9EPNtDuBuGLDKuvW8fJxkhw=
# =dw2I
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 May 2023 12:21:59 AM PDT
# gpg:                using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* tag 'net-pull-request' of https://github.com/jasowang/qemu: (50 commits)
  rtl8139: fix large_send_mss divide-by-zero
  docs/system/devices/igb: Note igb is tested for DPDK
  MAINTAINERS: Add a reviewer for network packet abstractions
  vmxnet3: Do not depend on PC
  igb: Clear-on-read ICR when ICR.INTA is set
  igb: Notify only new interrupts
  e1000e: Notify only new interrupts
  igb: Implement Tx timestamp
  igb: Implement Rx PTP2 timestamp
  igb: Implement igb-specific oversize check
  igb: Filter with the second VLAN tag for extended VLAN
  igb: Strip the second VLAN tag for extended VLAN
  igb: Implement Tx SCTP CSO
  igb: Implement Rx SCTP CSO
  igb: Use UDP for RSS hash
  igb: Implement MSI-X single vector mode
  tests/qtest/libqos/igb: Set GPIE.Multiple_MSIX
  hw/net/net_rx_pkt: Enforce alignment for eth_header
  net/eth: Always add VLAN tag
  net/eth: Use void pointers
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

rtl8139: fix large_send_mss divide-by-zero

If the driver sets large_send_mss to 0 then a divide-by-zero occurs.
Even if the division wasn't a problem, the for loop that emits MSS-sized
packets would never terminate.

Solve these issues by skipping offloading when large_send_mss=0.

This issue was found by OSS-Fuzz as part of Alexander Bulekov's device
fuzzing work. The reproducer is:

  $ cat << EOF | ./qemu-system-i386 -display none -machine accel=qtest, -m \
  512M,slots=1,maxmem=0xffff000000000000 -machine q35 -nodefaults -device \
  rtl8139,netdev=net0 -netdev user,id=net0 -device \
  pc-dimm,id=nv1,memdev=mem1,addr=0xb800a64602800000 -object \
  memory-backend-ram,id=mem1,size=2M  -qtest stdio
  outl 0xcf8 0x80000814
  outl 0xcfc 0xe0000000
  outl 0xcf8 0x80000804
  outw 0xcfc 0x06
  write 0xe0000037 0x1 0x04
  write 0xe00000e0 0x2 0x01
  write 0x1 0x1 0x04
  write 0x3 0x1 0x98
  write 0xa 0x1 0x8c
  write 0xb 0x1 0x02
  write 0xc 0x1 0x46
  write 0xd 0x1 0xa6
  write 0xf 0x1 0xb8
  write 0xb800a646028c000c 0x1 0x08
  write 0xb800a646028c000e 0x1 0x47
  write 0xb800a646028c0010 0x1 0x02
  write 0xb800a646028c0017 0x1 0x06
  write 0xb800a646028c0036 0x1 0x80
  write 0xe00000d9 0x1 0x40
  EOF

Buglink: https://gitlab.com/qemu-project/qemu/-/issues/1582
Closes: https://gitlab.com/qemu-project/qemu/-/issues/1582
Cc: qemu-stable@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>
Fixes: 6d71357a3b65 ("rtl8139: honor large send MSS value")
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

docs/system/devices/igb: Note igb is tested for DPDK

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

MAINTAINERS: Add a reviewer for network packet abstractions

I have made significant changes for network packet abstractions so add
me as a reviewer.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>

vmxnet3: Do not depend on PC

vmxnet3 has no dependency on PC, and VMware Fusion actually makes it
available on Apple Silicon according to:
https://kb.vmware.com/s/article/90364

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>

igb: Clear-on-read ICR when ICR.INTA is set

For GPIE.NSICR, Section 7.3.2.1.2 says:
> ICR bits are cleared on register read. If GPIE.NSICR = 0b, then the
> clear on read occurs only if no bit is set in the IMS or at least one
> bit is set in the IMS and there is a true interrupt as reflected in
> ICR.INTA.

e1000e does similar though it checks for CTRL_EXT.IAME, which does not
exist on igb.

Suggested-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

igb: Notify only new interrupts

This follows the corresponding change for e1000e. This fixes:
tests/avocado/netdev-ethtool.py:NetDevEthtool.test_igb

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

e1000e: Notify only new interrupts

In MSI-X mode, if there are interrupts already notified but not cleared
and a new interrupt arrives, e1000e incorrectly notifies the notified
ones again along with the new one.

To fix this issue, replace e1000e_update_interrupt_state() with
two new functions: e1000e_raise_interrupts() and
e1000e_lower_interrupts(). These functions don't only raise or lower
interrupts, but it also performs register writes which updates the
interrupt state. Before it performs a register write, these function
determines the interrupts already raised, and compares with the
interrupts raised after the register write to determine the interrupts
to notify.

The introduction of these functions made tracepoints which assumes that
the caller of e1000e_update_interrupt_state() performs register writes
obsolete. These tracepoints are now removed, and alternative ones are
added to the new functions.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

igb: Implement Tx timestamp

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>

igb: Implement Rx PTP2 timestamp

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

igb: Implement igb-specific oversize check

igb has a configurable size limit for LPE, and uses different limits
depending on whether the packet is treated as a VLAN packet.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>

igb: Filter with the second VLAN tag for extended VLAN

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

igb: Strip the second VLAN tag for extended VLAN

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

igb: Implement Tx SCTP CSO

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>

igb: Implement Rx SCTP CSO

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>

igb: Use UDP for RSS hash

e1000e does not support using UDP for RSS hash, but igb does.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>

igb: Implement MSI-X single vector mode

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>

tests/qtest/libqos/igb: Set GPIE.Multiple_MSIX

GPIE.Multiple_MSIX is not set by default, and needs to be set to get
interrupts from multiple MSI-X vectors.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>

hw/net/net_rx_pkt: Enforce alignment for eth_header

eth_strip_vlan and eth_strip_vlan_ex refers to ehdr_buf as struct
eth_header. Enforce alignment for the structure.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>

net/eth: Always add VLAN tag

It is possible to have another VLAN tag even if the packet is already
tagged.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

net/eth: Use void pointers

The uses of uint8_t pointers were misleading as they are never accessed
as an array of octets and it even require more strict alignment to
access as struct eth_header.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>

igb: Rename a variable in igb_receive_internal()

Rename variable "n" to "causes", which properly represents the content
of the variable.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>

e1000e: Rename a variable in e1000e_receive_internal()

Rename variable "n" to "causes", which properly represents the content
of the variable.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

igb: Clear EICR bits for delayed MSI-X interrupts

Section 7.3.4.1 says:
> When auto-clear is enabled for an interrupt cause, the EICR bit is
> set when a cause event mapped to this vector occurs. When the EITR
> Counter reaches zero, the MSI-X message is sent on PCIe. Then the
> EICR bit is cleared and enabled to be set by a new cause event

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

igb: Fix igb_mac_reg_init coding style alignment

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>

igb: Share common VF constants

The constants need to be consistent between the PF and VF.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>

igb: Add more definitions for Tx descriptor

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>

vmxnet3: Reset packet state after emptying Tx queue

Keeping Tx packet state after the transmit queue is emptied but this
behavior is unreliable as the state can be reset anytime the migration
happens.

Always reset Tx packet state always after the queue is emptied.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

e1000e: Reset packet state after emptying Tx queue

Keeping Tx packet state after the transmit queue is emptied has some
problems:
- The datasheet says the descriptors can be reused after the transmit
  queue is emptied, but the Tx packet state may keep references to them.
- The Tx packet state cannot be migrated so it can be reset anytime the
  migration happens.

Always reset Tx packet state always after the queue is emptied.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

igb: Read DCMD.VLE of the first Tx descriptor

Section 7.2.2.3 Advanced Transmit Data Descriptor says:
> For frames that spans multiple descriptors, all fields apart from
> DCMD.EOP, DCMD.RS, DCMD.DEXT, DTALEN, Address and DTYP are valid only
> in the first descriptors and are ignored in the subsequent ones.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>

igb: Remove goto

The goto is a bit confusing as it changes the control flow only if L4
protocol is not recognized. It is also different from e1000e, and
noisy when comparing e1000e and igb.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>

igb: Always log status after building rx metadata

Without this change, the status flags may not be traced e.g. if checksum
offloading is disabled.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>

e1000e: Always log status after building rx metadata

Without this change, the status flags may not be traced e.g. if checksum
offloading is disabled.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>

e1000x: Rename TcpIpv6 into TcpIpv6Ex

e1000e and igb employs NetPktRssIpV6TcpEx for RSS hash if TcpIpv6 MRQC
bit is set. Moreover, igb also has a MRQC bit for NetPktRssIpV6Tcp
though it is not implemented yet. Rename it to TcpIpv6Ex to avoid
confusion.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>

e1000x: Take CRC into consideration for size check

Section 13.7.15 Receive Length Error Count says:
>  Packets over 1522 bytes are oversized if LongPacketEnable is 0b
> (RCTL.LPE). If LongPacketEnable (LPE) is 1b, then an incoming packet
> is considered oversized if it exceeds 16384 bytes.

> These lengths are based on bytes in the received packet from
> <Destination Address> through <CRC>, inclusively.

As QEMU processes packets without CRC, the number of bytes for CRC
need to be subtracted. This change adds some size definitions to be used
to derive the new size thresholds to eth.h.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

e1000x: Share more Rx filtering logic

This saves some code and enables tracepoint for e1000's VLAN filtering.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>

net/eth: Rename eth_setup_vlan_headers_ex

The old eth_setup_vlan_headers has no user so remove it and rename
eth_setup_vlan_headers_ex.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>

hw/net/net_tx_pkt: Remove net_rx_pkt_get_l4_info

This function is not used.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

tests/avocado: Remove test_igb_nomsi_kvm

It is unlikely to find more bugs with KVM so remove test_igb_nomsi_kvm
to save time to run it.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>

tests/avocado: Remove unused imports

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

Fix references to igb Avocado test

Fixes: 9f95111474 ("tests/avocado: re-factor igb test to avoid timeouts")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>

igb: Always copy ethernet header

igb_receive_internal() used to check the iov length to determine
copy the iovs to a contiguous buffer, but the check is flawed in two
ways:
- It does not ensure that iovcnt > 0.
- It does not take virtio-net header into consideration.

The size of this copy is just 22 octets, which can be even less than
the code size required for checks. This (wrong) optimization is probably
not worth so just remove it. Removing this also allows igb to assume
aligned accesses for the ethernet header.

Fixes: 3a977deebe ("Intrdocue igb device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>

e1000e: Always copy ethernet header

e1000e_receive_internal() used to check the iov length to determine
copy the iovs to a contiguous buffer, but the check is flawed in two
ways:
- It does not ensure that iovcnt > 0.
- It does not take virtio-net header into consideration.

The size of this copy is just 18 octets, which can be even less than
the code size required for checks. This (wrong) optimization is probably
not worth so just remove it.

Fixes: 6f3fbe4ed0 ("net: Introduce e1000e device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

net/net_rx_pkt: Use iovec for net_rx_pkt_set_protocols()

igb does not properly ensure the buffer passed to
net_rx_pkt_set_protocols() is contiguous for the entire L2/L3/L4 header.
Allow it to pass scattered data to net_rx_pkt_set_protocols().

Fixes: 3a977deebe ("Intrdocue igb device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>

igb: Clear IMS bits when committing ICR access

The datasheet says contradicting statements regarding ICR accesses so it
is not reliable to determine the behavior of ICR accesses. However,
e1000e does clear IMS bits when reading ICR accesses and Linux also
expects ICR accesses will clear IMS bits according to:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/net/ethernet/intel/igb/igb_main.c?h=v6.2#n8048

Fixes: 3a977deebe ("Intrdocue igb device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>

igb: Do not require CTRL.VME for tx VLAN tagging

While the datasheet of e1000e says it checks CTRL.VME for tx VLAN
tagging, igb's datasheet has no such statements. It also says for
"CTRL.VLE":
> This register only affects the VLAN Strip in Rx it does not have any
> influence in the Tx path in the 82576.
(Appendix A. Changes from the 82575)

There is no "CTRL.VLE" so it is more likely that it is a mistake of
CTRL.VME.

Fixes: fba7c3b788 ("igb: respect VMVIR and VMOLR for VLAN")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>

igb: Fix Rx packet type encoding

igb's advanced descriptor uses a packet type encoding different from
one used in e1000e's extended descriptor. Fix the logic to encode
Rx packet type accordingly.

Fixes: 3a977deebe ("Intrdocue igb device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>

e1000x: Fix BPRC and MPRC

Before this change, e1000 and the common code updated BPRC and MPRC
depending on the matched filter, but e1000e and igb decided to update
those counters by deriving the packet type independently. This
inconsistency caused a multicast packet to be counted twice.

Updating BPRC and MPRC depending on are fundamentally flawed anyway as
a filter can be used for different types of packets. For example, it is
possible to filter broadcast packets with MTA.

Always determine what counters to update by inspecting the packets.

Fixes: 3b27430177 ("e1000: Implementing various counters")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>

hw/net/net_tx_pkt: Decouple interface from PCI

This allows to use the network packet abstractions even if PCI is not
used.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

hw/net/net_tx_pkt: Decouple implementation from PCI

This is intended to be followed by another change for the interface.
It also fixes the leak of memory mapping when the specified memory is
partially mapped.

Fixes: e263cd49c7 ("Packet abstraction for VMWARE network devices")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

e1000e: Fix tx/rx counters

The bytes and packets counter registers are cleared on read.

Copying the "total counter" registers to the "good counter" registers has
side effects.
If the "total" register is never read by the OS, it only gets incremented.
This leads to exponential growth of the "good" register.

This commit increments the counters individually to avoid this.

Signed-off-by: Timothée Cocault <timothee.cocault@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

Merge tag 'pull-qapi-2023-05-17-v2' of https://repo.or.cz/qemu/armbru into staging

QAPI patches patches for 2023-05-17

# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmRrTcgSHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTMycP/3sP6/U4kwOKMGGcB+n2pHJeioQS4xgF
# 94NCW+KpewxApP0XzIC2nDGjUe/rPcUfQmBNUumvYbqHO91tq91wFwkllBv2UR0q
# 6qfRji+e8+9H9hMDeVzzSNjlZZg/tSdIJlhkJDw1u4/3fpjfAmzVx6DO3wepSQ9Q
# m5Af/+uhVZWyUXMZqcKr2Zq8qur6ZFEBNpXpPvT60Tvy2heuQ+vcoE3tl2ZRQbmj
# b/jhtCu+NPjgOHtg9Gr2BPXqQiZBR4vFA7WBsB8wCf2xxULfTwHJvFz/e0vx5fUC
# q0Fsyybf4USo2PRMsRFv2v4dEuVGHb3E1RIJY4NTAxQMqqm4zfOyK0BzOGNDkxCn
# owNP4vKly0e/CfYDY74FHaPId295xyeo6S4Cj5ib9W23AAWUNt6f6vbjlDOLCLON
# c7yXP/aJwhTb2w1t0mLTmsKum3DpLlrudPudTylVlmYfwchkvUGsWYbaxu6H6XWk
# 49Ox/QPVwqG6elXNn3kTY4QqTAppXhE7QcPbioX9WOThVPf6aJCLdZSHEHu4HXkZ
# 4FRu73Z2wcPNB789xOrQoXs24GdKmWXQ6K01KC4v7WNJQBXccec52yGxvktQRZBm
# GL3zYdOOJEL+Y/8JrXTIo26M8HP/4kxV2VqB6KOuaGygMsW9w9jbG+ygLyjqUDQg
# 3APV3hdmVOht
# =6anf
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 22 May 2023 04:11:04 AM PDT
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [undefined]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* tag 'pull-qapi-2023-05-17-v2' of https://repo.or.cz/qemu/armbru:
  docs/interop: Delete qmp-intro.txt
  docs/interop/qmp-spec: Update error description for parsing errors
  docs/interop: Convert qmp-spec.txt to rST
  qapi: Improve error message for description following section

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'pull-request-2023-05-22' of https://gitlab.com/thuth/qemu into staging

* First batch of fixes to allow "make check" with "--without-default-devices"
* Enable the "bios bits" avocado test in the gitlab-CI
* Another minor fix for the redundancy DMA blocker code

# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmRrVhoRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbUaiRAApPVveet6WPQ7Ag1448LtqHTGiwl8x2Ba
# jQ7FTKhqdTC5O+/BU7IQkvGmErPxCc8WPB7eoowwBVA/4dr8YIIBLKqO4RtP6LXs
# rtUkzsPI9ExW+iJjIMVOmHsp/shlRhuf+Tmlr8OsTObecCeA4Vbxc+RlvYXfCPhM
# 8tOuLO8n6LQY/62fgXSzI5WlLQSzIo3aDSmCeWa1QHkPLf6itvGkwsNBytMJLoUT
# pXZnBNqlXiuyPtloLp+DMfRRkpq8AHB04+Sri7TVPxi7bJL28RMZiaAXpvHSFLz8
# JR2ApRrzBthiLMK1I6A0c2ZGCbVOAi1dhNDNqWCyx8ZBASEJj0XuT/+Qse81sKmG
# zNXr57x0CzWAJ59/taBM2hjUks10rJOmxHJYxS6i1JJR7u1zTuvii7toPMmf35zX
# bM7TYjKpYGa2HneHpw1eOjpTgUYZpgla/pVXZhKqoGdfmseBMlFU424MNl/xDRng
# bxuam3Ku+ClOeQlzXt8aceL/gTApJfvy5FAIAK5yUOQDTs6HjJJL2AfcOzss8kXb
# k6IMHgV1tnLed8B7K4iml2rzvk+RT3CPGvmaNwSAkdh8SnE5/bv1I6s4fHiXMlvC
# mmfvFSoWwdhcsD5r+XOFxfke8sGrOeQIXKefp6UL3hYVV7o2NUe89BytXZCzut/Y
# 6ulR25HHtmI=
# =m1Px
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 22 May 2023 04:46:34 AM PDT
# gpg:                using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg:                issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* tag 'pull-request-2023-05-22' of https://gitlab.com/thuth/qemu:
  memory: stricter checks prior to unsetting engaged_in_io
  acpi/tests/avocado/bits: enable bios bits avocado tests on gitlab CI pipeline
  .gitlab-ci.d/buildtest.yml: Run full "make check" with --without-default-devices
  tests/qemu-iotests/172: Run QEMU with -vga none and -nic none
  tests/qtest/meson.build: Run the net filter tests only with default devices
  tests/qtest: Check for the availability of virtio-ccw devices before using them
  tests/qtest/virtio-ccw-test: Remove superfluous tests
  tests/qtest/cdrom-test: Fix the test to also work without optional devices
  tests/qtest/usb-hcd-uhci-test: Skip test if UHCI controller is not available
  tests/qtest/readconfig-test: Check for the availability of USB controllers
  hw/sparc64/sun4u: Use MachineClass->default_nic and MachineClass->no_parallel
  hw/i386: Ignore the default parallel port if it has not been compiled into QEMU
  hw/char/parallel: Move TYPE_ISA_PARALLEL to the header file
  hw/sh4: Use MachineClass->default_nic in the sh4 r2d machine
  hw/s390x: Use MachineClass->default_nic in the s390x machine
  hw/ppc: Use MachineClass->default_nic in the ppc machines
  softmmu/vl.c: Disable default NIC if it has not been compiled into the binary
  hw: Move the default NIC machine class setting from the x86 to the generic one
  softmmu/vl.c: Check for the availability of the VGA device before using it
  hw/i386/Kconfig: ISAPC works fine without VGA_ISA

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging

Block layer patches

- qcow2 spec: Rename "zlib" compression to "deflate"
- Honour graph read lock even in the main thread + prerequisite fixes
- aio-posix: do not nest poll handlers (fixes infinite recursion)
- Refactor QMP blockdev transactions
- graph-lock: Disable locking for now
- iotests/245: Check if 'compress' driver is available

# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmRnrxURHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9aHyw/9H0xpceVb0kcC5CStOWCcq4PJHzkl/8/m
# c6ABFe0fgEuN2FCiKiCKOt6+V7qaIAw0+YLgPr/LGIsbIBzdxF3Xgd2UyIH6o4dK
# bSaIAaes6ZLTcYGIYEVJtHuwNgvzhjyBlW5qqwTpN0YArKS411eHyQ3wlUkCEVwK
# ZNmDY/MC8jq8r1xfwpPi7CaH6k1I6HhDmyl1PdURW9hmoAKZQZMhEdA5reJrUwZ9
# EhfgbLIaK0kkLLsufJ9YIkd+b/P3mUbH30kekNMOiA0XlnhWm1Djol5pxlnNiflg
# CGh6CAyhJKdXzwV567cSF11NYCsFmiY+c/l0xRIGscujwvO4iD7wFT5xk2geUAKV
# yaox8JA7Le36g7lO2CRadlS24/Ekqnle6q09g2i8s2tZwB4fS286vaZz6QDPmf7W
# VSQp9vuDj6ZcVjMsuo2+LzF3yA2Vqvgd9s032iBAjRDSGLAoOdQZjBJrreypJ0Oi
# pVFwgK+9QNCZBsqVhwVOgElSoK/3Vbl1kqpi30Ikgc0epAn0suM1g2QQPJ2Zt/MJ
# xqMlTv+48OW3vq3ebr8GXqkhvG/u0ku6I1G6ZyCrjOce89osK8QUaovERyi1eOmo
# ouoZ8UJJa6VfEkkmdhq2vF6u/MP4PeZ8MW3pYQy6qEnSOPDKpLnR30Z/s/HZCZcm
# H4QIbfQnzic=
# =edNP
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 19 May 2023 10:17:09 AM PDT
# gpg:                using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg:                issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]

* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (21 commits)
  iotests: Test commit with iothreads and ongoing I/O
  nbd/server: Fix drained_poll to wake coroutine in right AioContext
  graph-lock: Disable locking for now
  tested: add test for nested aio_poll() in poll handlers
  aio-posix: do not nest poll handlers
  iotests/245: Check if 'compress' driver is available
  graph-lock: Honour read locks even in the main thread
  blockjob: Adhere to rate limit even when reentered early
  test-bdrv-drain: Call bdrv_co_unref() in coroutine context
  test-bdrv-drain: Take graph lock more selectively
  qemu-img: Take graph lock more selectively
  qcow2: Unlock the graph in qcow2_do_open() where necessary
  block/export: Fix null pointer dereference in error path
  block: Call .bdrv_co_create(_opts) unlocked
  docs/interop/qcow2.txt: fix description about "zlib" clusters
  blockdev: qmp_transaction: drop extra generic layer
  blockdev: use state.bitmap in block-dirty-bitmap-add action
  blockdev: transaction: refactor handling transaction properties
  blockdev: qmp_transaction: refactor loop to classic for
  blockdev: transactions: rename some things
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

memory: stricter checks prior to unsetting engaged_in_io

engaged_in_io could be unset by an MR with re-entrancy checks disabled.
Ensure that only MRs that can set the engaged_in_io flag can unset it.

Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20230516084002.3813836-1-alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

acpi/tests/avocado/bits: enable bios bits avocado tests on gitlab CI pipeline

Biosbits avocado tests on gitlab has thus far been disabled because some
packages needed by this test was missing in the container images used by gitlab
CI. These packages have now been added with the commit:

da9000784c90d ("tests/lcitool: Add mtools and xorriso and remove genisoimage as dependencies")

Therefore, this change enables bits avocado test on gitlab.
At the same time, the bits cleanup code has also been made more robust with
this change.

Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20230517065357.5614-1-anisinha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

docs/interop: Delete qmp-intro.txt

qmp-intro.txt is quite small and provides very little information
that isn't already in the documentation elsewhere.  Fold the example
command lines into qemu-options.hx, and delete the now-unneeded plain
text document.

While we're touching the qemu-options.hx documentation text,
wordsmith it a little bit and improve the rST formatting.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230515162245.3964307-4-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

docs/interop/qmp-spec: Update error description for parsing errors

The description text for a parsing error has changed since the
spec doc was first written; update the example in the docs.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230515162245.3964307-3-peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>