OSDN Git Service
Ido Schimmel [Thu, 26 Mar 2020 14:17:33 +0000 (16:17 +0200)]
mlxsw: spectrum_mr: Fix list iteration in error path
list_for_each_entry_from_reverse() iterates backwards over the list from
the current position, but in the error path we should start from the
previous position.
Fix this by using list_for_each_entry_continue_reverse() instead.
This suppresses the following error from coccinelle:
drivers/net/ethernet/mellanox/mlxsw//spectrum_mr.c:655:34-38: ERROR:
invalid reference to the index variable of the iterator on line 636
Fixes:
c011ec1bbfd6 ("mlxsw: spectrum: Add the multicast routing offloading logic")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xu Wang [Thu, 26 Mar 2020 10:14:29 +0000 (18:14 +0800)]
qlcnic: Fix bad kzalloc null test
In qlcnic_83xx_get_reset_instruction_template, the variable
of null test is bad, so correct it.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 25 Mar 2020 20:58:05 +0000 (13:58 -0700)]
Merge git://git./linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
1) Fix deadlock in bpf_send_signal() from Yonghong Song.
2) Fix off by one in kTLS offload of mlx5, from Tariq Toukan.
3) Add missing locking in iwlwifi mvm code, from Avraham Stern.
4) Fix MSG_WAITALL handling in rxrpc, from David Howells.
5) Need to hold RTNL mutex in tcindex_partial_destroy_work(), from Cong
Wang.
6) Fix producer race condition in AF_PACKET, from Willem de Bruijn.
7) cls_route removes the wrong filter during change operations, from
Cong Wang.
8) Reject unrecognized request flags in ethtool netlink code, from
Michal Kubecek.
9) Need to keep MAC in reset until PHY is up in bcmgenet driver, from
Doug Berger.
10) Don't leak ct zone template in act_ct during replace, from Paul
Blakey.
11) Fix flushing of offloaded netfilter flowtable flows, also from Paul
Blakey.
12) Fix throughput drop during tx backpressure in cxgb4, from Rahul
Lakkireddy.
13) Don't let a non-NULL skb->dev leave the TCP stack, from Eric
Dumazet.
14) TCP_QUEUE_SEQ socket option has to update tp->copied_seq as well,
also from Eric Dumazet.
15) Restrict macsec to ethernet devices, from Willem de Bruijn.
16) Fix reference leak in some ethtool *_SET handlers, from Michal
Kubecek.
17) Fix accidental disabling of MSI for some r8169 chips, from Heiner
Kallweit.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (138 commits)
net: Fix CONFIG_NET_CLS_ACT=n and CONFIG_NFT_FWD_NETDEV={y, m} build
net: ena: Add PCI shutdown handler to allow safe kexec
selftests/net/forwarding: define libs as TEST_PROGS_EXTENDED
selftests/net: add missing tests to Makefile
r8169: re-enable MSI on RTL8168c
net: phy: mdio-bcm-unimac: Fix clock handling
cxgb4/ptp: pass the sign of offset delta in FW CMD
net: dsa: tag_8021q: replace dsa_8021q_remove_header with __skb_vlan_pop
net: cbs: Fix software cbs to consider packet sending time
net/mlx5e: Do not recover from a non-fatal syndrome
net/mlx5e: Fix ICOSQ recovery flow with Striding RQ
net/mlx5e: Fix missing reset of SW metadata in Striding RQ reset
net/mlx5e: Enhance ICOSQ WQE info fields
net/mlx5_core: Set IB capability mask1 to fix ib_srpt connection failure
selftests: netfilter: add nfqueue test case
netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress
netfilter: nft_fwd_netdev: validate family and chain type
netfilter: nft_set_rbtree: Detect partial overlaps on insertion
netfilter: nft_set_rbtree: Introduce and use nft_rbtree_interval_start()
netfilter: nft_set_pipapo: Separate partial and complete overlap cases on insertion
...
Linus Torvalds [Wed, 25 Mar 2020 20:52:36 +0000 (13:52 -0700)]
Merge tag 'gpio-v5.6-3' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
- One core quirk by myself to fix the .irq_disable() semantics when the
gpiolib core takes over this callback.
- The rest is an elaborate series of four patches fixing Intel laptop
ACPI wakeup quirks.
* tag 'gpio-v5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpiolib: acpi: Add quirk to ignore EC wakeups on HP x2 10 CHT + AXP288 model
gpiolib: acpi: Add quirk to ignore EC wakeups on HP x2 10 BYT + AXP288 model
gpiolib: acpi: Rework honor_wakeup option into an ignore_wake option
gpiolib: acpi: Correct comment for HP x2 10 honor_wakeup quirk
gpiolib: Fix irq_disable() semantics
David S. Miller [Wed, 25 Mar 2020 20:12:26 +0000 (13:12 -0700)]
Merge tag 'wireless-drivers-2020-03-25' of git://git./linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.6
Fourth, and last, set of fixes for v5.6. Just two important fixes to
iwlwifi regressions.
iwlwifi
* fix GEO_TX_POWER_LIMIT command on certain devices which caused
firmware to crash during initialisation
* add back device ids for three devices which were accidentally
removed
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Wed, 25 Mar 2020 12:47:18 +0000 (13:47 +0100)]
net: Fix CONFIG_NET_CLS_ACT=n and CONFIG_NFT_FWD_NETDEV={y, m} build
net/netfilter/nft_fwd_netdev.c: In function ‘nft_fwd_netdev_eval’:
net/netfilter/nft_fwd_netdev.c:32:10: error: ‘struct sk_buff’ has no member named ‘tc_redirected’
pkt->skb->tc_redirected = 1;
^~
net/netfilter/nft_fwd_netdev.c:33:10: error: ‘struct sk_buff’ has no member named ‘tc_from_ingress’
pkt->skb->tc_from_ingress = 1;
^~
To avoid a direct dependency with tc actions from netfilter, wrap the
redirect bits around CONFIG_NET_REDIRECT and move helpers to
include/linux/skbuff.h. Turn on this toggle from the ifb driver, the
only existing client of these bits in the tree.
This patch adds skb_set_redirected() that sets on the redirected bit
on the skbuff, it specifies if the packet was redirect from ingress
and resets the timestamp (timestamp reset was originally missing in the
netfilter bugfix).
Fixes:
bcfabee1afd99484 ("netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress")
Reported-by: noreply@ellerman.id.au
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guilherme G. Piccoli [Fri, 20 Mar 2020 12:55:34 +0000 (09:55 -0300)]
net: ena: Add PCI shutdown handler to allow safe kexec
Currently ENA only provides the PCI remove() handler, used during rmmod
for example. This is not called on shutdown/kexec path; we are potentially
creating a failure scenario on kexec:
(a) Kexec is triggered, no shutdown() / remove() handler is called for ENA;
instead pci_device_shutdown() clears the master bit of the PCI device,
stopping all DMA transactions;
(b) Kexec reboot happens and the device gets enabled again, likely having
its FW with that DMA transaction buffered; then it may trigger the (now
invalid) memory operation in the new kernel, corrupting kernel memory area.
This patch aims to prevent this, by implementing a shutdown() handler
quite similar to the remove() one - the difference being the handling
of the netdev, which is unregistered on remove(), but following the
convention observed in other drivers, it's only detached on shutdown().
This prevents an odd issue in AWS Nitro instances, in which after the 2nd
kexec the next one will fail with an initrd corruption, caused by a wild
DMA write to invalid kernel memory. The lspci output for the adapter
present in my instance is:
00:05.0 Ethernet controller [0200]: Amazon.com, Inc. Elastic Network
Adapter (ENA) [1d0f:ec20]
Suggested-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Acked-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Wed, 25 Mar 2020 08:41:01 +0000 (16:41 +0800)]
selftests/net/forwarding: define libs as TEST_PROGS_EXTENDED
The lib files should not be defined as TEST_PROGS, or we will run them
in run_kselftest.sh.
Also remove ethtool_lib.sh exec permission.
Fixes:
81573b18f26d ("selftests/net/forwarding: add Makefile to install tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Wed, 25 Mar 2020 08:07:01 +0000 (16:07 +0800)]
selftests/net: add missing tests to Makefile
Find some tests are missed in Makefile by running:
for file in $(ls *.sh); do grep -q $file Makefile || echo $file; done
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 25 Mar 2020 17:34:02 +0000 (10:34 -0700)]
Merge tag 'zonefs-5.6-rc7' of git://git./linux/kernel/git/dlemoal/zonefs
Pull zonefs fix from Damien Le Moal:
"A single fix from me to correctly handle the size of read-only zone
files"
* tag 'zonefs-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonfs: Fix handling of read-only zones
Damien Le Moal [Fri, 20 Mar 2020 12:36:54 +0000 (21:36 +0900)]
zonfs: Fix handling of read-only zones
The write pointer of zones in the read-only consition is defined as
invalid by the SCSI ZBC and ATA ZAC specifications. It is thus not
possible to determine the correct size of a read-only zone file on
mount. Fix this by handling read-only zones in the same manner as
offline zones by disabling all accesses to the zone (read and write)
and initializing the inode size of the read-only zone to 0).
For zones found to be in the read-only condition at runtime, only
disable write access to the zone and keep the size of the zone file to
its last updated value to allow the user to recover previously written
data.
Also fix zonefs documentation file to reflect this change.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
David S. Miller [Wed, 25 Mar 2020 00:30:40 +0000 (17:30 -0700)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) A new selftest for nf_queue, from Florian Westphal. This test
covers two recent fixes:
07f8e4d0fddb ("tcp: also NULL skb->dev
when copy was needed") and
b738a185beaa ("tcp: ensure skb->dev is
NULL before leaving TCP stack").
2) The fwd action breaks with ifb. For safety in next extensions,
make sure the fwd action only runs from ingress until it is extended
to be used from a different hook.
3) The pipapo set type now reports EEXIST in case of subrange overlaps.
Update the rbtree set to validate range overlaps, so far this
validation is only done only from userspace. From Stefano Brivio.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 25 Mar 2020 00:25:54 +0000 (17:25 -0700)]
Merge tag 'mlx5-fixes-2020-03-24' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2020-03-24
This series introduces some fixes to mlx5 driver.
From Aya, Fixes to the RX error recovery flows
From Leon, Fix IB capability mask
Please pull and let me know if there is any problem.
For -stable v5.5
('net/mlx5_core: Set IB capability mask1 to fix ib_srpt connection failure')
For -stable v5.4
('net/mlx5e: Fix ICOSQ recovery flow with Striding RQ')
('net/mlx5e: Do not recover from a non-fatal syndrome')
('net/mlx5e: Fix missing reset of SW metadata in Striding RQ reset')
('net/mlx5e: Enhance ICOSQ WQE info fields')
The above patch ('net/mlx5e: Enhance ICOSQ WQE info fields')
will fail to apply cleanly on v5.4 due to a trivial contextual conflict,
but it is an important fix, do I need to do something about it or just
assume Greg will know how to handle this ?
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Tue, 24 Mar 2020 19:58:29 +0000 (20:58 +0100)]
r8169: re-enable MSI on RTL8168c
The original change fixed an issue on RTL8168b by mimicking the vendor
driver behavior to disable MSI on chip versions before RTL8168d.
This however now caused an issue on a system with RTL8168c, see [0].
Therefore leave MSI disabled on RTL8168b, but re-enable it on RTL8168c.
[0] https://bugzilla.redhat.com/show_bug.cgi?id=
1792839
Fixes:
003bd5b4a7b4 ("r8169: don't use MSI before RTL8168d")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andre Przywara [Tue, 24 Mar 2020 16:10:10 +0000 (16:10 +0000)]
net: phy: mdio-bcm-unimac: Fix clock handling
The DT binding for this PHY describes an *optional* clock property.
Due to a bug in the error handling logic, we are actually ignoring this
clock *all* of the time so far.
Fix this by using devm_clk_get_optional() to handle this clock properly.
Fixes:
b78ac6ecd1b6b ("net: phy: mdio-bcm-unimac: Allow configuring MDIO clock divider")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Raju Rangoju [Tue, 24 Mar 2020 11:40:00 +0000 (17:10 +0530)]
cxgb4/ptp: pass the sign of offset delta in FW CMD
cxgb4_ptp_fineadjtime() doesn't pass the signedness of offset delta
in FW_PTP_CMD. Fix it by passing correct sign.
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Tue, 24 Mar 2020 09:45:34 +0000 (11:45 +0200)]
net: dsa: tag_8021q: replace dsa_8021q_remove_header with __skb_vlan_pop
Not only did this wheel did not need reinventing, but there is also
an issue with it: It doesn't remove the VLAN header in a way that
preserves the L2 payload checksum when that is being provided by the DSA
master hw. It should recalculate checksum both for the push, before
removing the header, and for the pull afterwards. But the current
implementation is quite dizzying, with pulls followed immediately
afterwards by pushes, the memmove is done before the push, etc. This
makes a DSA master with RX checksumming offload to print stack traces
with the infamous 'hw csum failure' message.
So remove the dsa_8021q_remove_header function and replace it with
something that actually works with inet checksumming.
Fixes:
d461933638ae ("net: dsa: tag_8021q: Create helper function for removing VLAN header")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zh-yuan Ye [Tue, 24 Mar 2020 08:28:25 +0000 (17:28 +0900)]
net: cbs: Fix software cbs to consider packet sending time
Currently the software CBS does not consider the packet sending time
when depleting the credits. It caused the throughput to be
Idleslope[kbps] * (Port transmit rate[kbps] / |Sendslope[kbps]|) where
Idleslope * (Port transmit rate / (Idleslope + |Sendslope|)) = Idleslope
is expected. In order to fix the issue above, this patch takes the time
when the packet sending completes into account by moving the anchor time
variable "last" ahead to the send completion time upon transmission and
adding wait when the next dequeue request comes before the send
completion time of the previous packet.
changelog:
V2->V3:
- remove unnecessary whitespace cleanup
- add the checks if port_rate is 0 before division
V1->V2:
- combine variable "send_completed" into "last"
- add the comment for estimate of the packet sending
Fixes:
585d763af09c ("net/sched: Introduce Credit Based Shaper (CBS) qdisc")
Signed-off-by: Zh-yuan Ye <ye.zh-yuan@socionext.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Aya Levin [Thu, 19 Mar 2020 11:25:17 +0000 (13:25 +0200)]
net/mlx5e: Do not recover from a non-fatal syndrome
For non-fatal syndromes like LOCAL_LENGTH_ERR, recovery shouldn't be
triggered. In these scenarios, the RQ is not actually in ERR state.
This misleads the recovery flow which assumes that the RQ is really in
error state and no more completions arrive, causing crashes on bad page
state.
Fixes:
8276ea1353a4 ("net/mlx5e: Report and recover from CQE with error on RQ")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Aya Levin [Mon, 16 Mar 2020 14:53:10 +0000 (16:53 +0200)]
net/mlx5e: Fix ICOSQ recovery flow with Striding RQ
In striding RQ mode, the buffers of an RX WQE are first
prepared and posted to the HW using a UMR WQEs via the ICOSQ.
We maintain the state of these in-progress WQEs in the RQ
SW struct.
In the flow of ICOSQ recovery, the corresponding RQ is not
in error state, hence:
- The buffers of the in-progress WQEs must be released
and the RQ metadata should reflect it.
- Existing RX WQEs in the RQ should not be affected.
For this, wrap the dealloc of the in-progress WQEs in
a function, and use it in the ICOSQ recovery flow
instead of mlx5e_free_rx_descs().
Fixes:
be5323c8379f ("net/mlx5e: Report and recover from CQE error on ICOSQ")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Aya Levin [Thu, 12 Mar 2020 10:35:32 +0000 (12:35 +0200)]
net/mlx5e: Fix missing reset of SW metadata in Striding RQ reset
When resetting the RQ (moving RQ state from RST to RDY), the driver
resets the WQ's SW metadata.
In striding RQ mode, we maintain a field that reflects the actual
expected WQ head (including in progress WQEs posted to the ICOSQ).
It was mistakenly not reset together with the WQ. Fix this here.
Fixes:
8276ea1353a4 ("net/mlx5e: Report and recover from CQE with error on RQ")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Aya Levin [Mon, 9 Mar 2020 07:44:18 +0000 (09:44 +0200)]
net/mlx5e: Enhance ICOSQ WQE info fields
Add number of WQEBBs (WQE's Basic Block) to WQE info struct. Set the
number of WQEBBs on WQE post, and increment the consumer counter (cc)
on completion.
In case of error completions, the cc was mistakenly not incremented,
keeping a gap between cc and pc (producer counter). This failed the
recovery flow on the ICOSQ from a CQE error which timed-out waiting for
the cc and pc to meet.
Fixes:
be5323c8379f ("net/mlx5e: Report and recover from CQE error on ICOSQ")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Leon Romanovsky [Mon, 16 Mar 2020 07:31:03 +0000 (09:31 +0200)]
net/mlx5_core: Set IB capability mask1 to fix ib_srpt connection failure
The cap_mask1 isn't protected by field_select and not listed among RW
fields, but it is required to be written to properly initialize ports
in IB virtualization mode.
Link: https://lore.kernel.org/linux-rdma/88bab94d2fd72f3145835b4518bc63dda587add6.camel@redhat.com
Fixes:
ab118da4c10a ("net/mlx5: Don't write read-only fields in MODIFY_HCA_VPORT_CONTEXT command")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Florian Westphal [Mon, 23 Mar 2020 16:34:30 +0000 (17:34 +0100)]
selftests: netfilter: add nfqueue test case
Add a test case to check nf queue infrastructure.
Could be extended in the future to also cover serialization of
conntrack, uid and secctx attributes in nfqueue.
For now, this checks that 'queue bypass' works, that a queue rule with
no bypass option blocks traffic and that userspace receives the expected
number of packets.
For this we add two queues and hook all of
prerouting/input/forward/output/postrouting.
Packets get queued twice with a dummy base chain in between:
This passes with current nf tree, but reverting
commit
946c0d8e6ed4 ("netfilter: nf_queue: fix reinject verdict handling")
makes this trip (it processes 30 instead of expected 20 packets).
v2: update config file with queue and other options missing/needed for
other tests.
v3: also test with tcp, this reveals problem with commit
28f8bfd1ac94 ("netfilter: Support iif matches in POSTROUTING"), due to
skb->dev pointing at another skb in the retransmit rbtree (skb->dev
aliases to rbnode child).
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Mon, 23 Mar 2020 18:53:10 +0000 (19:53 +0100)]
netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress
Set skb->tc_redirected to 1, otherwise the ifb driver drops the packet.
Set skb->tc_from_ingress to 1 to reinject the packet back to the ingress
path after leaving the ifb egress path.
This patch inconditionally sets on these two skb fields that are
meaningful to the ifb driver. The existing forward action is guaranteed
to run from ingress path.
Fixes:
39e6dea28adc ("netfilter: nf_tables: add forward expression to the netdev family")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Mon, 23 Mar 2020 13:27:16 +0000 (14:27 +0100)]
netfilter: nft_fwd_netdev: validate family and chain type
Make sure the forward action is only used from ingress.
Fixes:
39e6dea28adc ("netfilter: nf_tables: add forward expression to the netdev family")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stefano Brivio [Sun, 22 Mar 2020 02:22:01 +0000 (03:22 +0100)]
netfilter: nft_set_rbtree: Detect partial overlaps on insertion
...and return -ENOTEMPTY to the front-end in this case, instead of
proceeding. Currently, nft takes care of checking for these cases
and not sending them to the kernel, but if we drop the set_overlap()
call in nft we can end up in situations like:
# nft add table t
# nft add set t s '{ type inet_service ; flags interval ; }'
# nft add element t s '{ 1 - 5 }'
# nft add element t s '{ 6 - 10 }'
# nft add element t s '{ 4 - 7 }'
# nft list set t s
table ip t {
set s {
type inet_service
flags interval
elements = { 1-3, 4-5, 6-7 }
}
}
This change has the primary purpose of making the behaviour
consistent with nft_set_pipapo, but is also functional to avoid
inconsistent behaviour if userspace sends overlapping elements for
any reason.
v2: When we meet the same key data in the tree, as start element while
inserting an end element, or as end element while inserting a start
element, actually check that the existing element is active, before
resetting the overlap flag (Pablo Neira Ayuso)
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stefano Brivio [Sun, 22 Mar 2020 02:22:00 +0000 (03:22 +0100)]
netfilter: nft_set_rbtree: Introduce and use nft_rbtree_interval_start()
Replace negations of nft_rbtree_interval_end() with a new helper,
nft_rbtree_interval_start(), wherever this helps to visualise the
problem at hand, that is, for all the occurrences except for the
comparison against given flags in __nft_rbtree_get().
This gets especially useful in the next patch.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stefano Brivio [Sun, 22 Mar 2020 02:21:59 +0000 (03:21 +0100)]
netfilter: nft_set_pipapo: Separate partial and complete overlap cases on insertion
...and return -ENOTEMPTY to the front-end on collision, -EEXIST if
an identical element already exists. Together with the previous patch,
element collision will now be returned to the user as -EEXIST.
Reported-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Sun, 22 Mar 2020 02:21:58 +0000 (03:21 +0100)]
netfilter: nf_tables: Allow set back-ends to report partial overlaps on insertion
Currently, the -EEXIST return code of ->insert() callbacks is ambiguous: it
might indicate that a given element (including intervals) already exists as
such, or that the new element would clash with existing ones.
If identical elements already exist, the front-end is ignoring this without
returning error, in case NLM_F_EXCL is not set. However, if the new element
can't be inserted due an overlap, we should report this to the user.
To this purpose, allow set back-ends to return -ENOTEMPTY on collision with
existing elements, translate that to -EEXIST, and return that to userspace,
no matter if NLM_F_EXCL was set.
Reported-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Linus Torvalds [Tue, 24 Mar 2020 17:03:32 +0000 (10:03 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf tooling fixes from Ingo Molnar:
"A handful of tooling fixes all across the map, no kernel changes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools headers uapi: Update linux/in.h copy
perf probe: Do not depend on dwfl_module_addrsym()
perf probe: Fix to delete multiple probe event
perf parse-events: Fix reading of invalid memory in event parsing
perf python: Fix clang detection when using CC=clang-version
perf map: Fix off by one in strncpy() size argument
tools: Let O= makes handle a relative path with -C option
Linus Torvalds [Tue, 24 Mar 2020 16:57:46 +0000 (09:57 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"A build fix with certain Kconfig combinations"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioremap: Fix CONFIG_EFI=n build
Linus Torvalds [Tue, 24 Mar 2020 16:53:12 +0000 (09:53 -0700)]
Merge tag 'dmaengine-fix-5.6' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"Late fixes in dmaengine for v5.6:
- move .device_release missing log warning to debug
- couple of maintainer entries for HiSilicon and IADX drivers
- off-by-one fix for idxd driver
- documentation warning fixes
- TI k3 dma error handling fix"
* tag 'dmaengine-fix-5.6' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: ti: k3-udma-glue: Fix an error handling path in 'k3_udma_glue_cfg_rx_flow()'
MAINTAINERS: Add maintainer for HiSilicon DMA engine driver
dmaengine: idxd: fix off by one on cdev dwq refcount
MAINTAINERS: rectify the INTEL IADX DRIVER entry
dmaengine: move .device_release missing log warning to debug level
docs: dmaengine: provider.rst: get rid of some warnings
Hans de Goede [Mon, 2 Mar 2020 11:12:25 +0000 (12:12 +0100)]
gpiolib: acpi: Add quirk to ignore EC wakeups on HP x2 10 CHT + AXP288 model
There are at least 3 models of the HP x2 10 models:
Bay Trail SoC + AXP288 PMIC
Cherry Trail SoC + AXP288 PMIC
Cherry Trail SoC + TI PMIC
Like on the other HP x2 10 models we need to ignore wakeup for ACPI GPIO
events on the external embedded-controller pin to avoid spurious wakeups
on the HP x2 10 CHT + AXP288 model too.
This commit adds an extra DMI based quirk for the HP x2 10 CHT + AXP288
model, ignoring wakeups for ACPI GPIO events on the EC interrupt pin
on this model. This fixes spurious wakeups from suspend on this model.
Fixes:
aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism")
Reported-and-tested-by: Marc Lehmann <schmorp@schmorp.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200302111225.6641-4-hdegoede@redhat.com
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Vadym Kochan [Mon, 23 Mar 2020 14:24:04 +0000 (16:24 +0200)]
selftests/net/forwarding: add Makefile to install tests
Add missing Makefile for net/forwarding tests and include it to
the targets list, otherwise forwarding tests are not installed
in case of cross-compilation.
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kubecek [Sun, 22 Mar 2020 21:24:21 +0000 (22:24 +0100)]
ethtool: fix reference leak in some *_SET handlers
Andrew noticed that some handlers for *_SET commands leak a netdev
reference if required ethtool_ops callbacks do not exist. A simple
reproducer would be e.g.
ip link add veth1 type veth peer name veth2
ethtool -s veth1 wol g
ip link del veth1
Make sure dev_put() is called when ethtool_ops check fails.
v2: add Fixes tags
Fixes:
a53f3d41e4d3 ("ethtool: set link settings with LINKINFO_SET request")
Fixes:
bfbcfe2032e7 ("ethtool: set link modes related data with LINKMODES_SET request")
Fixes:
e54d04e3afea ("ethtool: set message mask with DEBUG_SET request")
Fixes:
8d425b19b305 ("ethtool: set wake-on-lan settings with WOL_SET request")
Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Sun, 22 Mar 2020 20:58:50 +0000 (13:58 -0700)]
net: dsa: Fix duplicate frames flooded by learning
When both the switch and the bridge are learning about new addresses,
switch ports attached to the bridge would see duplicate ARP frames
because both entities would attempt to send them.
Fixes:
5037d532b83d ("net: dsa: add Broadcom tag RX/TX handler")
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 24 Mar 2020 04:42:48 +0000 (21:42 -0700)]
Merge branch 'bnxt_en-Bug-fixes'
Michael Chan says:
====================
bnxt_en: Bug fixes.
5 bug fix patches covering an indexing bug for priority counters, memory
leak when retrieving DCB ETS settings, error path return code, proper
disabling of PCI before freeing context memory, and proper ring accounting
in error path.
Please also apply these to -stable. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Sun, 22 Mar 2020 20:40:05 +0000 (16:40 -0400)]
bnxt_en: Reset rings if ring reservation fails during open()
If ring counts are not reset when ring reservation fails,
bnxt_init_dflt_ring_mode() will not be called again to reinitialise
IRQs when open() is called and results in system crash as napi will
also be not initialised. This patch fixes it by resetting the ring
counts.
Fixes:
47558acd56a7 ("bnxt_en: Reserve rings at driver open if none was reserved at probe time.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sun, 22 Mar 2020 20:40:04 +0000 (16:40 -0400)]
bnxt_en: Free context memory after disabling PCI in probe error path.
Other shutdown code paths will always disable PCI first to shutdown DMA
before freeing context memory. Do the same sequence in the error path
of probe to be safe and consistent.
Fixes:
c20dc142dd7b ("bnxt_en: Disable bus master during PCI shutdown and driver unload.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sun, 22 Mar 2020 20:40:03 +0000 (16:40 -0400)]
bnxt_en: Return error if bnxt_alloc_ctx_mem() fails.
The current code ignores the return value from
bnxt_hwrm_func_backing_store_cfg(), causing the driver to proceed in
the init path even when this vital firmware call has failed. Fix it
by propagating the error code to the caller.
Fixes:
1b9394e5a2ad ("bnxt_en: Configure context memory on new devices.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Edwin Peer [Sun, 22 Mar 2020 20:40:02 +0000 (16:40 -0400)]
bnxt_en: fix memory leaks in bnxt_dcbnl_ieee_getets()
The allocated ieee_ets structure goes out of scope without being freed,
leaking memory. Appropriate result codes should be returned so that
callers do not rely on invalid data passed by reference.
Also cache the ETS config retrieved from the device so that it doesn't
need to be freed. The balance of the code was clearly written with the
intent of having the results of querying the hardware cached in the
device structure. The commensurate store was evidently missed though.
Fixes:
7df4ae9fe855 ("bnxt_en: Implement DCBNL to support host-based DCBX.")
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sun, 22 Mar 2020 20:40:01 +0000 (16:40 -0400)]
bnxt_en: Fix Priority Bytes and Packets counters in ethtool -S.
There is an indexing bug in determining these ethtool priority
counters. Instead of using the queue ID to index, we need to
normalize by modulo 10 to get the index. This index is then used
to obtain the proper CoS queue counter. Rename bp->pri2cos to
bp->pri2cos_idx to make this more clear.
Fixes:
e37fed790335 ("bnxt_en: Add ethtool -S priority counters.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Sun, 22 Mar 2020 17:51:13 +0000 (13:51 -0400)]
macsec: restrict to ethernet devices
Only attach macsec to ethernet devices.
Syzbot was able to trigger a KMSAN warning in macsec_handle_frame
by attaching to a phonet device.
Macvlan has a similar check in macvlan_port_create.
v1->v2
- fix commit message typo
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kubecek [Fri, 20 Mar 2020 23:46:50 +0000 (00:46 +0100)]
netlink: check for null extack in cookie helpers
Unlike NL_SET_ERR_* macros, nl_set_extack_cookie_u64() and
nl_set_extack_cookie_u32() helpers do not check extack argument for null
and neither do their callers, as syzbot recently discovered for
ethnl_parse_header().
Instead of fixing the callers and leaving the trap in place, add check of
null extack to both helpers to make them consistent with NL_SET_ERR_*
macros.
v2: drop incorrect second Fixes tag
Fixes:
2363d73a2f3e ("ethtool: reject unrecognized request flags")
Reported-by: syzbot+258a9089477493cea67b@syzkaller.appspotmail.com
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pawel Dembicki [Fri, 20 Mar 2020 20:46:14 +0000 (21:46 +0100)]
net: qmi_wwan: add support for ASKEY WWHC050
ASKEY WWHC050 is a mcie LTE modem.
The oem configuration states:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1690 ProdID=7588 Rev=ff.ff
S: Manufacturer=Android
S: Product=Android
S: SerialNumber=
813f0eef6e6e
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
Tested on openwrt distribution.
Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Fri, 20 Mar 2020 13:21:17 +0000 (16:21 +0300)]
NFC: fdp: Fix a signedness bug in fdp_nci_send_patch()
The nci_conn_max_data_pkt_payload_size() function sometimes returns
-EPROTO so "max_size" needs to be signed for the error handling to
work. We can make "payload_size" an int as well.
Fixes:
a06347c04c13 ("NFC: Add Intel Fields Peak NFC solution driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Qian Cai [Fri, 20 Mar 2020 02:54:21 +0000 (22:54 -0400)]
ipv4: fix a RCU-list lock in inet_dump_fib()
There is a place,
inet_dump_fib()
fib_table_dump
fn_trie_dump_leaf()
hlist_for_each_entry_rcu()
without rcu_read_lock() will trigger a warning,
WARNING: suspicious RCU usage
-----------------------------
net/ipv4/fib_trie.c:2216 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/1923:
#0:
ffffffff8ce76e40 (rtnl_mutex){+.+.}, at: netlink_dump+0xd6/0x840
Call Trace:
dump_stack+0xa1/0xea
lockdep_rcu_suspicious+0x103/0x10d
fn_trie_dump_leaf+0x581/0x590
fib_table_dump+0x15f/0x220
inet_dump_fib+0x4ad/0x5d0
netlink_dump+0x350/0x840
__netlink_dump_start+0x315/0x3e0
rtnetlink_rcv_msg+0x4d1/0x720
netlink_rcv_skb+0xf0/0x220
rtnetlink_rcv+0x15/0x20
netlink_unicast+0x306/0x460
netlink_sendmsg+0x44b/0x770
__sys_sendto+0x259/0x270
__x64_sys_sendto+0x80/0xa0
do_syscall_64+0x69/0xf4
entry_SYSCALL_64_after_hwframe+0x49/0xb3
Fixes:
18a8021a7be3 ("net/ipv4: Plumb support for filtering route dumps")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 24 Mar 2020 01:38:58 +0000 (18:38 -0700)]
Merge tag 'mlx5-fixes-2020-03-05' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2020-03-05
This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
For -stable v5.4
('net/mlx5: DR, Fix postsend actions write length')
For -stable v5.5
('net/mlx5e: kTLS, Fix TCP seq off-by-1 issue in TX resync flow')
('net/mlx5e: Fix endianness handling in pedit mask')
====================
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 23 Mar 2020 22:55:21 +0000 (15:55 -0700)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This fixes a correctness bug in the ARM64 version of ChaCha for
lib/crypto used by WireGuard"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: arm64/chacha - correctly walk through blocks
Eric Dumazet [Thu, 19 Mar 2020 02:21:02 +0000 (19:21 -0700)]
tcp: repair: fix TCP_QUEUE_SEQ implementation
When application uses TCP_QUEUE_SEQ socket option to
change tp->rcv_next, we must also update tp->copied_seq.
Otherwise, stuff relying on tcp_inq() being precise can
eventually be confused.
For example, tcp_zerocopy_receive() might crash because
it does not expect tcp_recv_skb() to return NULL.
We could add tests in various places to fix the issue,
or simply make sure tcp_inq() wont return a random value,
and leave fast path as it is.
Note that this fixes ioctl(fd, SIOCINQ, &val) at the same
time.
Fixes:
ee9952831cfd ("tcp: Initial repair mode")
Fixes:
05255b823a61 ("tcp: add TCP_ZEROCOPY_RECEIVE support for zerocopy receive")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Golan Ben Ami [Wed, 18 Mar 2020 06:12:54 +0000 (08:12 +0200)]
iwlwifi: don't send GEO_TX_POWER_LIMIT if no wgds table
The GEO_TX_POWER_LIMIT command was sent although
there is no wgds table, so the fw got wrong SAR values
from the driver.
Fix this by avoiding sending the command if no wgds
tables are available.
Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Fixes:
39c1a9728f93 ("iwlwifi: refactor the SAR tables from mvm to acpi")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Tested-By: Jonathan McDowell <noodles@earth.li>
Tested-by: Len Brown <len.brown@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20200318081237.46db40617cc6.Id5cf852ec8c5dbf20ba86bad7b165a0c828f8b2e@changeid
Luca Coelho [Tue, 17 Mar 2020 10:33:41 +0000 (12:33 +0200)]
iwlwifi: pcie: add 0x2526/0x401* devices back to cfg detection
Three devices, with PCI device ID 0x2526 and subdevice IDs 0x4010,
0x4018 and 0x401C were removed accidentally. Add them back.
Reported-by: Brett Hassal <brett.hassal@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206661
Fixes:
0b295a1eb81f ("iwlwifi: add device name to device_info")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20200317123331.16762b29f26c.I928bcaa799e7b3d33838c0667714eeb9fa665290@changeid
Christophe JAILLET [Wed, 18 Mar 2020 19:12:09 +0000 (20:12 +0100)]
dmaengine: ti: k3-udma-glue: Fix an error handling path in 'k3_udma_glue_cfg_rx_flow()'
All but one error handling paths in the 'k3_udma_glue_cfg_rx_flow()'
function 'goto err' and call 'k3_udma_glue_release_rx_flow()'.
This not correct because this function has a 'channel->flows_ready--;' at
the end, but 'flows_ready' has not been incremented here, when we branch to
the error handling path.
In order to keep a correct value in 'flows_ready', un-roll
'k3_udma_glue_release_rx_flow()', simplify it, add some labels and branch
at the correct places when an error is detected.
Doing so, we also NULLify 'flow->udma_rflow' in a path that was lacking it.
Fixes:
d70241913413 ("dmaengine: ti: k3-udma: Add glue layer for non DMAengine user")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200318191209.1267-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Zhou Wang [Fri, 13 Mar 2020 01:23:44 +0000 (09:23 +0800)]
MAINTAINERS: Add maintainer for HiSilicon DMA engine driver
Add myself as the maintainer of HiSilicon DMA engine driver.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Link: https://lore.kernel.org/r/1584062624-196854-1-git-send-email-wangzhou1@hisilicon.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Dave Jiang [Thu, 12 Mar 2020 16:23:53 +0000 (09:23 -0700)]
dmaengine: idxd: fix off by one on cdev dwq refcount
The refcount check for dedicated workqueue (dwq) is off by one and allows
more than 1 user to open the char device. Fix check so only a single user
can open the device.
Fixes:
42d279f9137a ("dmaengine: idxd: add char driver to expose submission portal to userland")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/158403020187.10208.14117394394540710774.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Linus Torvalds [Mon, 23 Mar 2020 01:31:56 +0000 (18:31 -0700)]
Linux 5.6-rc7
Linus Torvalds [Sun, 22 Mar 2020 18:35:33 +0000 (11:35 -0700)]
Merge tag 'for-5.6-rc6-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two fixes.
The first is a regression: when dropping some incompat bits the
conditions were reversed. The other is a fix for rename whiteout
potentially leaving stack memory linked to a list"
* tag 'for-5.6-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix removal of raid[56|1c34} incompat flags after removing block group
btrfs: fix log context list corruption after rename whiteout error
Linus Torvalds [Sun, 22 Mar 2020 17:46:50 +0000 (10:46 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"10 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
x86/mm: split vmalloc_sync_all()
mm, slub: prevent kmalloc_node crashes and memory leaks
mm/mmu_notifier: silence PROVE_RCU_LIST warnings
epoll: fix possible lost wakeup on epoll_ctl() path
mm: do not allow MADV_PAGEOUT for CoW pages
mm, memcg: throttle allocators based on ancestral memory.high
mm, memcg: fix corruption on 64-bit divisor in memory.high throttling
page-flags: fix a crash at SetPageError(THP_SWAP)
mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case
memcg: fix NULL pointer dereference in __mem_cgroup_usage_unregister_event
Alan Maguire [Wed, 18 Mar 2020 18:53:21 +0000 (18:53 +0000)]
selftests/net: add definition for SOL_DCCP to fix compilation errors for old libc
Many systems build/test up-to-date kernels with older libcs, and
an older glibc (2.17) lacks the definition of SOL_DCCP in
/usr/include/bits/socket.h (it was added in the 4.6 timeframe).
Adding the definition to the test program avoids a compilation
failure that gets in the way of building tools/testing/selftests/net.
The test itself will work once the definition is added; either
skipping due to DCCP not being configured in the kernel under test
or passing, so there are no other more up-to-date glibc dependencies
here it seems beyond that missing definition.
Fixes:
11fb60d1089f ("selftests: net: reuseport_addr_any: add DCCP")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Doug Berger [Wed, 18 Mar 2020 00:05:36 +0000 (17:05 -0700)]
net: bcmgenet: always enable status blocks
The hardware offloading of the NETIF_F_HW_CSUM and NETIF_F_RXCSUM
features requires the use of Transmit Status Blocks before transmit
frame data and Receive Status Blocks before receive frame data to
carry the checksum information.
Unfortunately, these status blocks are currently only enabled when
the NETIF_F_HW_CSUM feature is enabled. As a result NETIF_F_RXCSUM
will not actually be offloaded to the hardware unless both it and
NETIF_F_HW_CSUM are enabled. Fortunately, that is the default
configuration.
This commit addresses this issue by always enabling the use of
status blocks on both transmit and receive frames. Further, it
replaces the use of a dedicated flag within the driver private
data structure with direct use of the netdev features flags.
Fixes:
810155397890 ("net: bcmgenet: use CHECKSUM_COMPLETE for NETIF_F_RXCSUM")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Grygorii Strashko [Tue, 17 Mar 2020 18:04:54 +0000 (20:04 +0200)]
net: phy: dp83867: w/a for fld detect threshold bootstrapping issue
When the DP83867 PHY is strapped to enable Fast Link Drop (FLD) feature
STRAP_STS2.STRAP_ FLD (reg 0x006F bit 10), the Energy Lost Threshold for
FLD Energy Lost Mode FLD_THR_CFG.ENERGY_LOST_FLD_THR (reg 0x002e bits 2:0)
will be defaulted to 0x2. This may cause the phy link to be unstable. The
new DP83867 DM recommends to always restore ENERGY_LOST_FLD_THR to 0x1.
Hence, restore default value of FLD_THR_CFG.ENERGY_LOST_FLD_THR to 0x1 when
FLD is enabled by bootstrapping as recommended by DM.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Emil Renner Berthing [Sat, 21 Mar 2020 14:36:19 +0000 (15:36 +0100)]
net: stmmac: dwmac-rk: fix error path in rk_gmac_probe
Make sure we clean up devicetree related configuration
also when clock init fails.
Fixes:
fecd4d7eef8b ("net: stmmac: dwmac-rk: Add integrated PHY support")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Oliver Hartkopp [Sat, 21 Mar 2020 13:08:29 +0000 (14:08 +0100)]
slcan: not call free_netdev before rtnl_unlock in slcan_open
As the description before netdev_run_todo, we cannot call free_netdev
before rtnl_unlock, fix it by reorder the code.
This patch is a 1:1 copy of upstream slip.c commit
f596c87005f7
("slip: not call free_netdev before rtnl_unlock in slip_open").
Reported-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lukas Bulwahn [Sat, 21 Mar 2020 12:05:14 +0000 (13:05 +0100)]
ionic: make spdxcheck.py happy
Headers ionic_if.h and ionic_regs.h are licensed under three alternative
licenses and the used SPDX-License-Identifier expression makes
./scripts/spdxcheck.py complain:
drivers/net/ethernet/pensando/ionic/ionic_if.h: 1:52 Syntax error: OR
drivers/net/ethernet/pensando/ionic/ionic_regs.h: 1:52 Syntax error: OR
As OR is associative, it is irrelevant if the parentheses are put around
the first or the second OR-expression.
Simply add parentheses to make spdxcheck.py happy.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Taehee Yoo [Sat, 21 Mar 2020 06:46:50 +0000 (06:46 +0000)]
hsr: fix general protection fault in hsr_addr_is_self()
The port->hsr is used in the hsr_handle_frame(), which is a
callback of rx_handler.
hsr master and slaves are initialized in hsr_add_port().
This function initializes several pointers, which includes port->hsr after
registering rx_handler.
So, in the rx_handler routine, un-initialized pointer would be used.
In order to fix this, pointers should be initialized before
registering rx_handler.
Test commands:
ip netns del left
ip netns del right
modprobe -rv veth
modprobe -rv hsr
killall ping
modprobe hsr
ip netns add left
ip netns add right
ip link add veth0 type veth peer name veth1
ip link add veth2 type veth peer name veth3
ip link add veth4 type veth peer name veth5
ip link set veth1 netns left
ip link set veth3 netns right
ip link set veth4 netns left
ip link set veth5 netns right
ip link set veth0 up
ip link set veth2 up
ip link set veth0 address fc:00:00:00:00:01
ip link set veth2 address fc:00:00:00:00:02
ip netns exec left ip link set veth1 up
ip netns exec left ip link set veth4 up
ip netns exec right ip link set veth3 up
ip netns exec right ip link set veth5 up
ip link add hsr0 type hsr slave1 veth0 slave2 veth2
ip a a 192.168.100.1/24 dev hsr0
ip link set hsr0 up
ip netns exec left ip link add hsr1 type hsr slave1 veth1 slave2 veth4
ip netns exec left ip a a 192.168.100.2/24 dev hsr1
ip netns exec left ip link set hsr1 up
ip netns exec left ip n a 192.168.100.1 dev hsr1 lladdr \
fc:00:00:00:00:01 nud permanent
ip netns exec left ip n r 192.168.100.1 dev hsr1 lladdr \
fc:00:00:00:00:01 nud permanent
for i in {1..100}
do
ip netns exec left ping 192.168.100.1 &
done
ip netns exec left hping3 192.168.100.1 -2 --flood &
ip netns exec right ip link add hsr2 type hsr slave1 veth3 slave2 veth5
ip netns exec right ip a a 192.168.100.3/24 dev hsr2
ip netns exec right ip link set hsr2 up
ip netns exec right ip n a 192.168.100.1 dev hsr2 lladdr \
fc:00:00:00:00:02 nud permanent
ip netns exec right ip n r 192.168.100.1 dev hsr2 lladdr \
fc:00:00:00:00:02 nud permanent
for i in {1..100}
do
ip netns exec right ping 192.168.100.1 &
done
ip netns exec right hping3 192.168.100.1 -2 --flood &
while :
do
ip link add hsr0 type hsr slave1 veth0 slave2 veth2
ip a a 192.168.100.1/24 dev hsr0
ip link set hsr0 up
ip link del hsr0
done
Splat looks like:
[ 120.954938][ C0] general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1]I
[ 120.957761][ C0] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[ 120.959064][ C0] CPU: 0 PID: 1511 Comm: hping3 Not tainted 5.6.0-rc5+ #460
[ 120.960054][ C0] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 120.962261][ C0] RIP: 0010:hsr_addr_is_self+0x65/0x2a0 [hsr]
[ 120.963149][ C0] Code: 44 24 18 70 73 2f c0 48 c1 eb 03 48 8d 04 13 c7 00 f1 f1 f1 f1 c7 40 04 00 f2 f2 f2 4
[ 120.966277][ C0] RSP: 0018:
ffff8880d9c09af0 EFLAGS:
00010206
[ 120.967293][ C0] RAX:
0000000000000006 RBX:
1ffff1101b38135f RCX:
0000000000000000
[ 120.968516][ C0] RDX:
dffffc0000000000 RSI:
ffff8880d17cb208 RDI:
0000000000000000
[ 120.969718][ C0] RBP:
0000000000000030 R08:
ffffed101b3c0e3c R09:
0000000000000001
[ 120.972203][ C0] R10:
0000000000000001 R11:
ffffed101b3c0e3b R12:
0000000000000000
[ 120.973379][ C0] R13:
ffff8880aaf80100 R14:
ffff8880aaf800f2 R15:
ffff8880aaf80040
[ 120.974410][ C0] FS:
00007f58e693f740(0000) GS:
ffff8880d9c00000(0000) knlGS:
0000000000000000
[ 120.979794][ C0] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 120.980773][ C0] CR2:
00007ffcb8b38f29 CR3:
00000000afe8e001 CR4:
00000000000606f0
[ 120.981945][ C0] Call Trace:
[ 120.982411][ C0] <IRQ>
[ 120.982848][ C0] ? hsr_add_node+0x8c0/0x8c0 [hsr]
[ 120.983522][ C0] ? rcu_read_lock_held+0x90/0xa0
[ 120.984159][ C0] ? rcu_read_lock_sched_held+0xc0/0xc0
[ 120.984944][ C0] hsr_handle_frame+0x1db/0x4e0 [hsr]
[ 120.985597][ C0] ? hsr_nl_nodedown+0x2b0/0x2b0 [hsr]
[ 120.986289][ C0] __netif_receive_skb_core+0x6bf/0x3170
[ 120.992513][ C0] ? check_chain_key+0x236/0x5d0
[ 120.993223][ C0] ? do_xdp_generic+0x1460/0x1460
[ 120.993875][ C0] ? register_lock_class+0x14d0/0x14d0
[ 120.994609][ C0] ? __netif_receive_skb_one_core+0x8d/0x160
[ 120.995377][ C0] __netif_receive_skb_one_core+0x8d/0x160
[ 120.996204][ C0] ? __netif_receive_skb_core+0x3170/0x3170
[ ... ]
Reported-by: syzbot+fcf5dd39282ceb27108d@syzkaller.appspotmail.com
Fixes:
c5a759117210 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 22 Mar 2020 02:44:23 +0000 (19:44 -0700)]
Merge branch 'hinic-BugFixes'
Luo bin says:
====================
hinic: BugFixes
Fix a number of bugs which have been present since the first commit.
The bugs fixed in these patchs are hardly exposed unless given
very specific conditions.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Luo bin [Fri, 20 Mar 2020 23:13:20 +0000 (23:13 +0000)]
hinic: fix wrong value of MIN_SKB_LEN
the minimum value of skb len that hw supports is 32 rather than 17
Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Luo bin [Fri, 20 Mar 2020 23:13:19 +0000 (23:13 +0000)]
hinic: fix wrong para of wait_for_completion_timeout
the second input parameter of wait_for_completion_timeout should
be jiffies instead of millisecond
Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Luo bin [Fri, 20 Mar 2020 23:13:18 +0000 (23:13 +0000)]
hinic: fix out-of-order excution in arm cpu
add read barrier in driver code to keep from reading other fileds
in dma memory which is writable for hw until we have verified the
memory is valid for driver
Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Luo bin [Fri, 20 Mar 2020 23:13:17 +0000 (23:13 +0000)]
hinic: fix the bug of clearing event queue
should disable eq irq before freeing it, must clear event queue
depth in hw before freeing relevant memory to avoid illegal
memory access and update consumer idx to avoid invalid interrupt
Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Luo bin [Fri, 20 Mar 2020 23:13:16 +0000 (23:13 +0000)]
hinic: fix a bug of waitting for IO stopped
it's unreliable for fw to check whether IO is stopped, so driver
wait for enough time to ensure IO process is done in hw before
freeing resources
Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joerg Roedel [Sun, 22 Mar 2020 01:22:41 +0000 (18:22 -0700)]
x86/mm: split vmalloc_sync_all()
Commit
3f8fd02b1bf1 ("mm/vmalloc: Sync unmappings in
__purge_vmap_area_lazy()") introduced a call to vmalloc_sync_all() in
the vunmap() code-path. While this change was necessary to maintain
correctness on x86-32-pae kernels, it also adds additional cycles for
architectures that don't need it.
Specifically on x86-64 with CONFIG_VMAP_STACK=y some people reported
severe performance regressions in micro-benchmarks because it now also
calls the x86-64 implementation of vmalloc_sync_all() on vunmap(). But
the vmalloc_sync_all() implementation on x86-64 is only needed for newly
created mappings.
To avoid the unnecessary work on x86-64 and to gain the performance
back, split up vmalloc_sync_all() into two functions:
* vmalloc_sync_mappings(), and
* vmalloc_sync_unmappings()
Most call-sites to vmalloc_sync_all() only care about new mappings being
synchronized. The only exception is the new call-site added in the
above mentioned commit.
Shile Zhang directed us to a report of an 80% regression in reaim
throughput.
Fixes:
3f8fd02b1bf1 ("mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Borislav Petkov <bp@suse.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [GHES]
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20191009124418.8286-1-joro@8bytes.org
Link: https://lists.01.org/hyperkitty/list/lkp@lists.01.org/thread/4D3JPPHBNOSPFK2KEPC6KGKS6J25AIDB/
Link: http://lkml.kernel.org/r/20191113095530.228959-1-shile.zhang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlastimil Babka [Sun, 22 Mar 2020 01:22:37 +0000 (18:22 -0700)]
mm, slub: prevent kmalloc_node crashes and memory leaks
Sachin reports [1] a crash in SLUB __slab_alloc():
BUG: Kernel NULL pointer dereference on read at 0x000073b0
Faulting instruction address: 0xc0000000003d55f4
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 19 PID: 1 Comm: systemd Not tainted 5.6.0-rc2-next-
20200218-autotest #1
NIP:
c0000000003d55f4 LR:
c0000000003d5b94 CTR:
0000000000000000
REGS:
c0000008b37836d0 TRAP: 0300 Not tainted (5.6.0-rc2-next-
20200218-autotest)
MSR:
8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR:
24004844 XER:
00000000
CFAR:
c00000000000dec4 DAR:
00000000000073b0 DSISR:
40000000 IRQMASK: 1
GPR00:
c0000000003d5b94 c0000008b3783960 c00000000155d400 c0000008b301f500
GPR04:
0000000000000dc0 0000000000000002 c0000000003443d8 c0000008bb398620
GPR08:
00000008ba2f0000 0000000000000001 0000000000000000 0000000000000000
GPR12:
0000000024004844 c00000001ec52a00 0000000000000000 0000000000000000
GPR16:
c0000008a1b20048 c000000001595898 c000000001750c18 0000000000000002
GPR20:
c000000001750c28 c000000001624470 0000000fffffffe0 5deadbeef0000122
GPR24:
0000000000000001 0000000000000dc0 0000000000000002 c0000000003443d8
GPR28:
c0000008b301f500 c0000008bb398620 0000000000000000 c00c000002287180
NIP ___slab_alloc+0x1f4/0x760
LR __slab_alloc+0x34/0x60
Call Trace:
___slab_alloc+0x334/0x760 (unreliable)
__slab_alloc+0x34/0x60
__kmalloc_node+0x110/0x490
kvmalloc_node+0x58/0x110
mem_cgroup_css_online+0x108/0x270
online_css+0x48/0xd0
cgroup_apply_control_enable+0x2ec/0x4d0
cgroup_mkdir+0x228/0x5f0
kernfs_iop_mkdir+0x90/0xf0
vfs_mkdir+0x110/0x230
do_mkdirat+0xb0/0x1a0
system_call+0x5c/0x68
This is a PowerPC platform with following NUMA topology:
available: 2 nodes (0-1)
node 0 cpus:
node 0 size: 0 MB
node 0 free: 0 MB
node 1 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
node 1 size: 35247 MB
node 1 free: 30907 MB
node distances:
node 0 1
0: 10 40
1: 40 10
possible numa nodes: 0-31
This only happens with a mmotm patch "mm/memcontrol.c: allocate
shrinker_map on appropriate NUMA node" [2] which effectively calls
kmalloc_node for each possible node. SLUB however only allocates
kmem_cache_node on online N_NORMAL_MEMORY nodes, and relies on
node_to_mem_node to return such valid node for other nodes since commit
a561ce00b09e ("slub: fall back to node_to_mem_node() node if allocating
on memoryless node"). This is however not true in this configuration
where the _node_numa_mem_ array is not initialized for nodes 0 and 2-31,
thus it contains zeroes and get_partial() ends up accessing
non-allocated kmem_cache_node.
A related issue was reported by Bharata (originally by Ramachandran) [3]
where a similar PowerPC configuration, but with mainline kernel without
patch [2] ends up allocating large amounts of pages by kmalloc-1k
kmalloc-512. This seems to have the same underlying issue with
node_to_mem_node() not behaving as expected, and might probably also
lead to an infinite loop with CONFIG_SLUB_CPU_PARTIAL [4].
This patch should fix both issues by not relying on node_to_mem_node()
anymore and instead simply falling back to NUMA_NO_NODE, when
kmalloc_node(node) is attempted for a node that's not online, or has no
usable memory. The "usable memory" condition is also changed from
node_present_pages() to N_NORMAL_MEMORY node state, as that is exactly
the condition that SLUB uses to allocate kmem_cache_node structures.
The check in get_partial() is removed completely, as the checks in
___slab_alloc() are now sufficient to prevent get_partial() being
reached with an invalid node.
[1] https://lore.kernel.org/linux-next/
3381CD91-AB3D-4773-BA04-
E7A072A63968@linux.vnet.ibm.com/
[2] https://lore.kernel.org/linux-mm/
fff0e636-4c36-ed10-281c-
8cdb0687c839@virtuozzo.com/
[3] https://lore.kernel.org/linux-mm/
20200317092624.GB22538@in.ibm.com/
[4] https://lore.kernel.org/linux-mm/
088b5996-faae-8a56-ef9c-
5b567125ae54@suse.cz/
Fixes:
a561ce00b09e ("slub: fall back to node_to_mem_node() node if allocating on memoryless node")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Reported-by: PUVICHAKRAVARTHY RAMACHANDRAN <puvichakravarthy@in.ibm.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Tested-by: Bharata B Rao <bharata@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christopher Lameter <cl@linux.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200320115533.9604-1-vbabka@suse.cz
Debugged-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Qian Cai [Sun, 22 Mar 2020 01:22:34 +0000 (18:22 -0700)]
mm/mmu_notifier: silence PROVE_RCU_LIST warnings
It is safe to traverse mm->notifier_subscriptions->list either under
SRCU read lock or mm->notifier_subscriptions->lock using
hlist_for_each_entry_rcu(). Silence the PROVE_RCU_LIST false positives,
for example,
WARNING: suspicious RCU usage
-----------------------------
mm/mmu_notifier.c:484 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
3 locks held by libvirtd/802:
#0:
ffff9321e3f58148 (&mm->mmap_sem#2){++++}, at: do_mprotect_pkey+0xe1/0x3e0
#1:
ffffffff91ae6160 (mmu_notifier_invalidate_range_start){+.+.}, at: change_p4d_range+0x5fa/0x800
#2:
ffffffff91ae6e08 (srcu){....}, at: __mmu_notifier_invalidate_range_start+0x178/0x460
stack backtrace:
CPU: 7 PID: 802 Comm: libvirtd Tainted: G I 5.6.0-rc6-next-
20200317+ #2
Hardware name: HP ProLiant BL460c Gen8, BIOS I31 11/02/2014
Call Trace:
dump_stack+0xa4/0xfe
lockdep_rcu_suspicious+0xeb/0xf5
__mmu_notifier_invalidate_range_start+0x3ff/0x460
change_p4d_range+0x746/0x800
change_protection+0x1df/0x300
mprotect_fixup+0x245/0x3e0
do_mprotect_pkey+0x23b/0x3e0
__x64_sys_mprotect+0x51/0x70
do_syscall_64+0x91/0xae8
entry_SYSCALL_64_after_hwframe+0x49/0xb3
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Link: http://lkml.kernel.org/r/20200317175640.2047-1-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roman Penyaev [Sun, 22 Mar 2020 01:22:30 +0000 (18:22 -0700)]
epoll: fix possible lost wakeup on epoll_ctl() path
This fixes possible lost wakeup introduced by commit
a218cc491420.
Originally modifications to ep->wq were serialized by ep->wq.lock, but
in commit
a218cc491420 ("epoll: use rwlock in order to reduce
ep_poll_callback() contention") a new rw lock was introduced in order to
relax fd event path, i.e. callers of ep_poll_callback() function.
After the change ep_modify and ep_insert (both are called on epoll_ctl()
path) were switched to ep->lock, but ep_poll (epoll_wait) was using
ep->wq.lock on wqueue list modification.
The bug doesn't lead to any wqueue list corruptions, because wake up
path and list modifications were serialized by ep->wq.lock internally,
but actual waitqueue_active() check prior wake_up() call can be
reordered with modifications of ep ready list, thus wake up can be lost.
And yes, can be healed by explicit smp_mb():
list_add_tail(&epi->rdlink, &ep->rdllist);
smp_mb();
if (waitqueue_active(&ep->wq))
wake_up(&ep->wp);
But let's make it simple, thus current patch replaces ep->wq.lock with
the ep->lock for wqueue modifications, thus wake up path always observes
activeness of the wqueue correcty.
Fixes:
a218cc491420 ("epoll: use rwlock in order to reduce ep_poll_callback() contention")
Reported-by: Max Neunhoeffer <max@arangodb.com>
Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Max Neunhoeffer <max@arangodb.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Christopher Kohlhoff <chris.kohlhoff@clearpool.io>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Jes Sorensen <jes.sorensen@gmail.com>
Cc: <stable@vger.kernel.org> [5.1+]
Link: http://lkml.kernel.org/r/20200214170211.561524-1-rpenyaev@suse.de
References: https://bugzilla.kernel.org/show_bug.cgi?id=205933
Bisected-by: Max Neunhoeffer <max@arangodb.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Sun, 22 Mar 2020 01:22:26 +0000 (18:22 -0700)]
mm: do not allow MADV_PAGEOUT for CoW pages
Jann has brought up a very interesting point [1]. While shared pages
are excluded from MADV_PAGEOUT normally, CoW pages can be easily
reclaimed that way. This can lead to all sorts of hard to debug
problems. E.g. performance problems outlined by Daniel [2].
There are runtime environments where there is a substantial memory
shared among security domains via CoW memory and a easy to reclaim way
of that memory, which MADV_{COLD,PAGEOUT} offers, can lead to either
performance degradation in for the parent process which might be more
privileged or even open side channel attacks.
The feasibility of the latter is not really clear to me TBH but there is
no real reason for exposure at this stage. It seems there is no real
use case to depend on reclaiming CoW memory via madvise at this stage so
it is much easier to simply disallow it and this is what this patch
does. Put it simply MADV_{PAGEOUT,COLD} can operate only on the
exclusively owned memory which is a straightforward semantic.
[1] http://lkml.kernel.org/r/CAG48ez0G3JkMq61gUmyQAaCq=_TwHbi1XKzWRooxZkv08PQKuw@mail.gmail.com
[2] http://lkml.kernel.org/r/CAKOZueua_v8jHCpmEtTB6f3i9e2YnmX4mqdYVWhV4E=Z-n+zRQ@mail.gmail.com
Fixes:
9c276cc65a58 ("mm: introduce MADV_COLD")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Daniel Colascione <dancol@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: "Joel Fernandes (Google)" <joel@joelfernandes.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200312082248.GS23944@dhcp22.suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chris Down [Sun, 22 Mar 2020 01:22:23 +0000 (18:22 -0700)]
mm, memcg: throttle allocators based on ancestral memory.high
Prior to this commit, we only directly check the affected cgroup's
memory.high against its usage. However, it's possible that we are being
reclaimed as a result of hitting an ancestor memory.high and should be
penalised based on that, instead.
This patch changes memory.high overage throttling to use the largest
overage in its ancestors when considering how many penalty jiffies to
charge. This makes sure that we penalise poorly behaving cgroups in the
same way regardless of at what level of the hierarchy memory.high was
breached.
Fixes:
0e4b01df8659 ("mm, memcg: throttle allocators when failing reclaim over memory.high")
Reported-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org> [5.4.x+]
Link: http://lkml.kernel.org/r/8cd132f84bd7e16cdb8fde3378cdbf05ba00d387.1584036142.git.chris@chrisdown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chris Down [Sun, 22 Mar 2020 01:22:20 +0000 (18:22 -0700)]
mm, memcg: fix corruption on 64-bit divisor in memory.high throttling
Commit
0e4b01df8659 had a bunch of fixups to use the right division
method. However, it seems that after all that it still wasn't right --
div_u64 takes a 32-bit divisor.
The headroom is still large (2^32 pages), so on mundane systems you
won't hit this, but this should definitely be fixed.
Fixes:
0e4b01df8659 ("mm, memcg: throttle allocators when failing reclaim over memory.high")
Reported-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: <stable@vger.kernel.org> [5.4.x+]
Link: http://lkml.kernel.org/r/80780887060514967d414b3cd91f9a316a16ab98.1584036142.git.chris@chrisdown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Qian Cai [Sun, 22 Mar 2020 01:22:17 +0000 (18:22 -0700)]
page-flags: fix a crash at SetPageError(THP_SWAP)
Commit
bd4c82c22c36 ("mm, THP, swap: delay splitting THP after swapped
out") supported writing THP to a swap device but forgot to upgrade an
older commit
df8c94d13c7e ("page-flags: define behavior of FS/IO-related
flags on compound pages") which could trigger a crash during THP
swapping out with DEBUG_VM_PGFLAGS=y,
kernel BUG at include/linux/page-flags.h:317!
page dumped because: VM_BUG_ON_PAGE(1 && PageCompound(page))
page:
fffff3b2ec3a8000 refcount:512 mapcount:0 mapping:
000000009eb0338c index:0x7f6e58200 head:
fffff3b2ec3a8000 order:9 compound_mapcount:0 compound_pincount:0
anon flags: 0x45fffe0000d8454(uptodate|lru|workingset|owner_priv_1|writeback|head|reclaim|swapbacked)
end_swap_bio_write()
SetPageError(page)
VM_BUG_ON_PAGE(1 && PageCompound(page))
<IRQ>
bio_endio+0x297/0x560
dec_pending+0x218/0x430 [dm_mod]
clone_endio+0xe4/0x2c0 [dm_mod]
bio_endio+0x297/0x560
blk_update_request+0x201/0x920
scsi_end_request+0x6b/0x4b0
scsi_io_completion+0x509/0x7e0
scsi_finish_command+0x1ed/0x2a0
scsi_softirq_done+0x1c9/0x1d0
__blk_mqnterrupt+0xf/0x20
</IRQ>
Fix by checking PF_NO_TAIL in those places instead.
Fixes:
bd4c82c22c36 ("mm, THP, swap: delay splitting THP after swapped out")
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200310235846.1319-1-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Baoquan He [Sun, 22 Mar 2020 01:22:13 +0000 (18:22 -0700)]
mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case
In section_deactivate(), pfn_to_page() doesn't work any more after
ms->section_mem_map is resetting to NULL in SPARSEMEM|!VMEMMAP case. It
causes a hot remove failure:
kernel BUG at mm/page_alloc.c:4806!
invalid opcode: 0000 [#1] SMP PTI
CPU: 3 PID: 8 Comm: kworker/u16:0 Tainted: G W 5.5.0-next-
20200205+ #340
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
Workqueue: kacpi_hotplug acpi_hotplug_work_fn
RIP: 0010:free_pages+0x85/0xa0
Call Trace:
__remove_pages+0x99/0xc0
arch_remove_memory+0x23/0x4d
try_remove_memory+0xc8/0x130
__remove_memory+0xa/0x11
acpi_memory_device_remove+0x72/0x100
acpi_bus_trim+0x55/0x90
acpi_device_hotplug+0x2eb/0x3d0
acpi_hotplug_work_fn+0x1a/0x30
process_one_work+0x1a7/0x370
worker_thread+0x30/0x380
kthread+0x112/0x130
ret_from_fork+0x35/0x40
Let's move the ->section_mem_map resetting after
depopulate_section_memmap() to fix it.
[akpm@linux-foundation.org: remove unneeded initialization, per David]
Fixes:
ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug")
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200307084229.28251-2-bhe@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chunguang Xu [Sun, 22 Mar 2020 01:22:10 +0000 (18:22 -0700)]
memcg: fix NULL pointer dereference in __mem_cgroup_usage_unregister_event
An eventfd monitors multiple memory thresholds of the cgroup, closes them,
the kernel deletes all events related to this eventfd. Before all events
are deleted, another eventfd monitors the memory threshold of this cgroup,
leading to a crash:
BUG: kernel NULL pointer dereference, address:
0000000000000004
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD
800000033058e067 P4D
800000033058e067 PUD
3355ce067 PMD 0
Oops: 0002 [#1] SMP PTI
CPU: 2 PID: 14012 Comm: kworker/2:6 Kdump: loaded Not tainted 5.6.0-rc4 #3
Hardware name: LENOVO 20AWS01K00/20AWS01K00, BIOS GLET70WW (2.24 ) 05/21/2014
Workqueue: events memcg_event_remove
RIP: 0010:__mem_cgroup_usage_unregister_event+0xb3/0x190
RSP: 0018:
ffffb47e01c4fe18 EFLAGS:
00010202
RAX:
0000000000000001 RBX:
ffff8bb223a8a000 RCX:
0000000000000001
RDX:
0000000000000001 RSI:
ffff8bb22fb83540 RDI:
0000000000000001
RBP:
ffffb47e01c4fe48 R08:
0000000000000000 R09:
0000000000000010
R10:
000000000000000c R11:
071c71c71c71c71c R12:
ffff8bb226aba880
R13:
ffff8bb223a8a480 R14:
0000000000000000 R15:
0000000000000000
FS:
0000000000000000(0000) GS:
ffff8bb242680000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000004 CR3:
000000032c29c003 CR4:
00000000001606e0
Call Trace:
memcg_event_remove+0x32/0x90
process_one_work+0x172/0x380
worker_thread+0x49/0x3f0
kthread+0xf8/0x130
ret_from_fork+0x35/0x40
CR2:
0000000000000004
We can reproduce this problem in the following ways:
1. We create a new cgroup subdirectory and a new eventfd, and then we
monitor multiple memory thresholds of the cgroup through this eventfd.
2. closing this eventfd, and __mem_cgroup_usage_unregister_event ()
will be called multiple times to delete all events related to this
eventfd.
The first time __mem_cgroup_usage_unregister_event() is called, the
kernel will clear all items related to this eventfd in thresholds->
primary.
Since there is currently only one eventfd, thresholds-> primary becomes
empty, so the kernel will set thresholds-> primary and hresholds-> spare
to NULL. If at this time, the user creates a new eventfd and monitor
the memory threshold of this cgroup, kernel will re-initialize
thresholds-> primary.
Then when __mem_cgroup_usage_unregister_event () is called for the
second time, because thresholds-> primary is not empty, the system will
access thresholds-> spare, but thresholds-> spare is NULL, which will
trigger a crash.
In general, the longer it takes to delete all events related to this
eventfd, the easier it is to trigger this problem.
The solution is to check whether the thresholds associated with the
eventfd has been cleared when deleting the event. If so, we do nothing.
[akpm@linux-foundation.org: fix comment, per Kirill]
Fixes:
907860ed381a ("cgroups: make cftype.unregister_event() void-returning")
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/077a6f67-aefa-4591-efec-f2f3af2b0b02@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 21 Mar 2020 19:08:26 +0000 (12:08 -0700)]
Merge tag 'block-5.6-
20200320' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Just two NVMe fabrics fixes that should go into 5.6"
* tag 'block-5.6-
20200320' of git://git.kernel.dk/linux-block:
nvmet-tcp: set MSG_MORE only if we actually have more to send
nvme-rdma: Avoid double freeing of async event data
Linus Torvalds [Sat, 21 Mar 2020 18:54:47 +0000 (11:54 -0700)]
Merge tag 'io_uring-5.6-
20200320' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Two different fixes in here:
- Fix for a potential NULL pointer deref for links with async or
drain marked (Pavel)
- Fix for not properly checking RLIMIT_NOFILE for async punted
operations.
This affects openat/openat2, which were added this cycle, and
accept4. I did a full audit of other cases where we might check
current->signal->rlim[] and found only RLIMIT_FSIZE for buffered
writes and fallocate. That one is fixed and queued for 5.7 and
marked stable"
* tag 'io_uring-5.6-
20200320' of git://git.kernel.dk/linux-block:
io_uring: make sure accept honor rlimit nofile
io_uring: make sure openat/openat2 honor rlimit nofile
io_uring: NULL-deref for IOSQE_{ASYNC,DRAIN}
Linus Torvalds [Sat, 21 Mar 2020 18:50:36 +0000 (11:50 -0700)]
Merge branch 'turbostat' of git://git./linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
"Update to turbostat v20.03.20.
These patches unlock the full turbostat features for some new
machines, plus a couple other minor tweaks"
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: update version
tools/power turbostat: Print cpuidle information
tools/power turbostat: Fix 32-bit capabilities warning
tools/power turbostat: Fix missing SYS_LPI counter on some Chromebooks
tools/power turbostat: Support Elkhart Lake
tools/power turbostat: Support Jasper Lake
tools/power turbostat: Support Ice Lake server
tools/power turbostat: Support Tiger Lake
tools/power turbostat: Fix gcc build warnings
tools/power turbostat: Support Cometlake
Linus Torvalds [Sat, 21 Mar 2020 15:51:45 +0000 (08:51 -0700)]
Merge tag 'powerpc-5.6-5' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Two fixes for bugs introduced this cycle:
- fix a crash when shutting down a KVM PR guest (our original style
of KVM which doesn't use hypervisor mode)
- fix for the recently added 32-bit KASAN_VMALLOC support
Thanks to: Christophe Leroy, Greg Kurz, Sean Christopherson"
* tag 'powerpc-5.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Fix kernel crash with PR KVM
powerpc/kasan: Fix shadow memory protection with CONFIG_KASAN_VMALLOC
Len Brown [Mon, 18 Nov 2019 02:18:31 +0000 (21:18 -0500)]
tools/power turbostat: update version
A stitch in time saves nine.
Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Sat, 21 Mar 2020 04:47:47 +0000 (00:47 -0400)]
tools/power turbostat: Print cpuidle information
Print cpuidle driver and governor.
Originally-by: Antti Laakso <antti.laakso@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Florian Westphal [Fri, 20 Mar 2020 15:52:02 +0000 (16:52 +0100)]
tcp: also NULL skb->dev when copy was needed
In rare cases retransmit logic will make a full skb copy, which will not
trigger the zeroing added in recent change
b738a185beaa ("tcp: ensure skb->dev is NULL before leaving TCP stack").
Cc: Eric Dumazet <edumazet@google.com>
Fixes:
75c119afe14f ("tcp: implement rb-tree based retransmit queue")
Fixes:
28f8bfd1ac94 ("netfilter: Support iif matches in POSTROUTING")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 21 Mar 2020 02:34:18 +0000 (19:34 -0700)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Refetch IP header pointer after pskb_may_pull() in flowtable,
from Haishuang Yan.
2) Fix memleak in flowtable offload in nf_flow_table_free(),
from Paul Blakey.
3) Set control.addr_type mask in flowtable offload, from Edward Cree.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jens Axboe [Sat, 21 Mar 2020 01:14:16 +0000 (19:14 -0600)]
Merge branch 'nvme-5.6-rc6' of git://git.infradead.org/nvme into block-5.6
Pull NVMe fixes from Keith:
"Two late nvme fabrics fixes for 5.6: a double free with the rdma
transport, and a regression fix for tcp; please pull."
* 'nvme-5.6-rc6' of git://git.infradead.org/nvme:
nvmet-tcp: set MSG_MORE only if we actually have more to send
nvme-rdma: Avoid double freeing of async event data
Filipe Manana [Fri, 20 Mar 2020 18:43:48 +0000 (18:43 +0000)]
btrfs: fix removal of raid[56|1c34} incompat flags after removing block group
We are incorrectly dropping the raid56 and raid1c34 incompat flags when
there are still raid56 and raid1c34 block groups, not when we do not any
of those anymore. The logic just got unintentionally broken after adding
the support for the raid1c34 modes.
Fix this by clear the flags only if we do not have block groups with the
respective profiles.
Fixes:
9c907446dce3 ("btrfs: drop incompat bit for raid1c34 after last block group is gone")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Sagi Grimberg [Thu, 12 Mar 2020 23:06:38 +0000 (16:06 -0700)]
nvmet-tcp: set MSG_MORE only if we actually have more to send
When we send PDU data, we want to optimize the tcp stack
operation if we have more data to send. So when we set MSG_MORE
when:
- We have more fragments coming in the batch, or
- We have a more data to send in this PDU
- We don't have a data digest trailer
- We optimize with the SUCCESS flag and omit the NVMe completion
(used if sq_head pointer update is disabled)
This addresses a regression in QD=1 with SUCCESS flag optimization
as we unconditionally set MSG_MORE when we didn't actually have
more data to send.
Fixes:
70583295388a ("nvmet-tcp: implement C2HData SUCCESS optimization")
Reported-by: Mark Wunderlich <mark.wunderlich@intel.com>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Linus Torvalds [Fri, 20 Mar 2020 16:28:25 +0000 (09:28 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- Fix panic() when it occurs during secondary CPU startup
- Fix "kpti=off" when KASLR is enabled
- Fix howler in compat syscall table for vDSO clock_getres() fallback
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: compat: Fix syscall number of compat_clock_getres
arm64: kpti: Fix "kpti=off" when KASLR is enabled
arm64: smp: fix crash_smp_send_stop() behaviour
arm64: smp: fix smp_send_stop() behaviour
Linus Torvalds [Fri, 20 Mar 2020 16:24:22 +0000 (09:24 -0700)]
Merge tag 'char-misc-5.6-rc7' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small different driver fixes for 5.6-rc7:
- binderfs fix, yet again
- slimbus new device id added
- hwtracing bugfixes for reported issues and a new device id
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
intel_th: pci: Add Elkhart Lake CPU support
intel_th: Fix user-visible error codes
intel_th: msu: Fix the unexpected state warning
stm class: sys-t: Fix the use of time_after()
slimbus: ngd: add v2.1.0 compatible
binderfs: use refcount for binder control devices too
Linus Torvalds [Fri, 20 Mar 2020 16:20:38 +0000 (09:20 -0700)]
Merge tag 'staging-5.6-rc7' of git://git./linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Greg KH:
"Here are a number of small staging and IIO driver fixes for 5.6-rc7
Nothing major here, just resolutions for some reported problems:
- iio bugfixes for a number of different drivers
- greybus loopback_test fixes
- wfx driver fixes
All of these have been in linux-next with no reported issues"
* tag 'staging-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8188eu: Add device id for MERCUSYS MW150US v2
staging: greybus: loopback_test: fix potential path truncations
staging: greybus: loopback_test: fix potential path truncation
staging: greybus: loopback_test: fix poll-mask build breakage
staging: wfx: fix RCU usage between hif_join() and ieee80211_bss_get_ie()
staging: wfx: fix RCU usage in wfx_join_finalize()
staging: wfx: make warning about pending frame less scary
staging: wfx: fix lines ending with a comma instead of a semicolon
staging: wfx: fix warning about freeing in-use mutex during device unregister
staging/speakup: fix get_word non-space look-ahead
iio: ping: set pa_laser_ping_cfg in of_ping_match
iio: chemical: sps30: fix missing triggered buffer dependency
iio: st_sensors: remap SMO8840 to LIS2DH12
iio: light: vcnl4000: update sampling periods for vcnl4040
iio: light: vcnl4000: update sampling periods for vcnl4200
iio: accel: adxl372: Set iio_chan BE
iio: magnetometer: ak8974: Fix negative raw values in sysfs
iio: trigger: stm32-timer: disable master mode when stopping
iio: adc: stm32-dfsdm: fix sleep in atomic context
iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode
Linus Torvalds [Fri, 20 Mar 2020 16:16:35 +0000 (09:16 -0700)]
Merge tag 'usb-5.6-rc7' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 5.6-rc7. And there's a thunderbolt
driver fix thrown in for good measure as well.
These fixes are:
- new device ids for usb-serial drivers
- thunderbolt error code fix
- xhci driver fixes
- typec fixes
- cdc-acm driver fixes
- chipidea driver fix
- more USB quirks added for devices that need them.
All of these have been in linux-next with no reported issues"
* tag 'usb-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: cdc-acm: fix rounding error in TIOCSSERIAL
USB: cdc-acm: fix close_delay and closing_wait units in TIOCSSERIAL
usb: quirks: add NO_LPM quirk for RTL8153 based ethernet adapters
usb: chipidea: udc: fix sleeping function called from invalid context
USB: serial: pl2303: add device-id for HP LD381
USB: serial: option: add ME910G1 ECM composition 0x110b
usb: host: xhci-plat: add a shutdown
usb: typec: ucsi: displayport: Fix a potential race during registration
usb: typec: ucsi: displayport: Fix NULL pointer dereference
USB: Disable LPM on WD19's Realtek Hub
usb: xhci: apply XHCI_SUSPEND_DELAY to AMD XHCI controller 1022:145c
xhci: Do not open code __print_symbolic() in xhci trace events
thunderbolt: Fix error code in tb_port_is_width_supported()
Linus Torvalds [Fri, 20 Mar 2020 16:13:35 +0000 (09:13 -0700)]
Merge tag 'tty-5.6-rc7' of git://git./linux/kernel/git/gregkh/tty
Pull tty fixes from Greg KH:
"Here are three small tty_io bugfixes for reported issues that Eric has
resolved for 5.6-rc7
All of these have been in linux-next with no reported issues"
* tag 'tty-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: fix compat TIOCGSERIAL checking wrong function ptr
tty: fix compat TIOCGSERIAL leaking uninitialized memory
tty: drop outdated comments about release_tty() locking
Linus Torvalds [Fri, 20 Mar 2020 16:10:29 +0000 (09:10 -0700)]
Merge tag 'sound-5.6-rc7' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A few fixes covering the issues reported by syzkaller, a couple of
fixes for the MIDI decoding bug, and a few usual HD-audio quirks.
Some of them are about ALSA core stuff, but they are small fixes just
for corner cases, and nothing thrilling"
* tag 'sound-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Enable the headset of Acer N50-600 with ALC662
ALSA: hda/realtek - Enable headset mic of Acer X2660G with ALC662
ALSA: seq: oss: Fix running status after receiving sysex
ALSA: seq: virmidi: Fix running status after receiving sysex
ALSA: pcm: oss: Remove WARNING from snd_pcm_plug_alloc() checks
ALSA: hda/realtek: Fix pop noise on ALC225
ALSA: line6: Fix endless MIDI read loop
ALSA: pcm: oss: Avoid plugin buffer overflow
Linus Torvalds [Fri, 20 Mar 2020 16:03:54 +0000 (09:03 -0700)]
Merge tag 'drm-fixes-2020-03-20' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Hope you are well hiding out above the garage. A few amdgpu changes
but nothing too major. I've had a wisdom tooth out this week so
haven't been to on top of things, but all seems good.
core:
- fix lease warning
i915:
- Track active elements during dequeue
- Fix failure to handle all MCR ranges
- Revert unnecessary workaround
amdgpu:
- Pageflip fix
- VCN clockgating fixes
- GPR debugfs fix for umr
- GPU reset fix
- eDP fix for MBP
- DCN2.x fix
dw-hdmi:
- fix AVI frame colorimetry
komeda:
- fix compiler warning
bochs:
- downgrade a binding failure to a warning"
* tag 'drm-fixes-2020-03-20' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: Fix pageflip event race condition for DCN.
drm/amdgpu: fix typo for vcn2.5/jpeg2.5 idle check
drm/amdgpu: fix typo for vcn2/jpeg2 idle check
drm/amdgpu: fix typo for vcn1 idle check
drm/lease: fix WARNING in idr_destroy
drm/i915: Handle all MCR ranges
Revert "drm/i915/tgl: Add extra hdc flush workaround"
drm/i915/execlists: Track active elements during dequeue
drm/bochs: downgrade pci_request_region failure from error to warning
drm/amd/display: Add link_rate quirk for Apple 15" MBP 2017
drm/amdgpu: add fbdev suspend/resume on gpu reset
drm/amd/amdgpu: Fix GPR read from debugfs (v2)
drm/amd/display: fix typos for dcn20_funcs and dcn21_funcs struct
drm/komeda: mark PM functions as __maybe_unused
drm/bridge: dw-hdmi: fix AVI frame colorimetry