OSDN Git Service
Andreas Färber [Wed, 17 Jul 2013 16:44:48 +0000 (18:44 +0200)]
ide: Introduce abstract QOM type for PCIIDEState
Needed for QOM casts.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Peter Crosthwaite [Mon, 24 Jun 2013 06:56:30 +0000 (16:56 +1000)]
ide/piix: QOM casting sweep
Use standard QOM cast macro. Remove usage of DO_UPCAST() and
direct -> style upcasting.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Fri, 26 Jul 2013 23:55:26 +0000 (01:55 +0200)]
fdc: Fix inheritence for SUNW,fdtwo
Since commit
dd3be7420774f7dc8f37a96ca24d07f0b6f31b3b SUNW,fdtwo's
initfn (realizefn since
940194c2369e50d91d1abf6f36d43853eea5e539)
was using SYSBUS_FDC() cast. This uses type sysbus-fdc rather than
SUNW,fdtwo.
Fix this by letting SUNW,fdtwo and sysbus-fdc both inherit from an
abstract type base-sysbus-fdc.
This allows to consolidate realizefns by using instance_init functions.
Clean up variable names and variable order while at it.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Hu Tao <hutao@cn.fujitsu.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Anthony Liguori [Mon, 29 Jul 2013 16:33:48 +0000 (11:33 -0500)]
Merge remote-tracking branch 'stefanha/block' into staging
# By Stefan Hajnoczi (4) and others
# Via Stefan Hajnoczi
* stefanha/block:
dataplane: refuse to start if device is already in use
dataplane: enable virtio-blk x-data-plane=on live migration
migration: fix spice migration
migration: notify migration state before starting thread
block: Repair the throttling code.
gluster: Add image resize support
Message-id:
1375112172-24863-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Mon, 29 Jul 2013 16:33:34 +0000 (11:33 -0500)]
Merge remote-tracking branch 'afaerber/tags/qom-cpu-for-anthony' into staging
QOM CPUState refactorings
* Fix x86 cpu-add
* Change KVM PMU behavior for 1.6
# gpg: Signature made Mon 29 Jul 2013 10:28:18 AM CDT using RSA key ID
3E7E013F
# gpg: Can't check signature: public key not found
# By Eduardo Habkost (2) and Andreas Färber (1)
# Via Andreas Färber
* afaerber/tags/qom-cpu-for-anthony:
target-i386: Disable PMU CPUID leaf by default
target-i386: Pass X86CPU object to cpu_x86_find_by_name()
cpu: Partially revert "cpu: Change qemu_init_vcpu() argument to CPUState"
Markus Armbruster [Fri, 26 Jul 2013 14:44:34 +0000 (16:44 +0200)]
qapi: Rename ChardevBackend member "memory" to "ringbuf"
Commit
1da48c6 called the new member "memory" after commit
3949e59
standardized "ringbuf". Rename for consistency.
However, member name "memory" is visible in QMP since 1.5. It's
undocumented just like the driver name. Keep it working anyway.
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id:
1374849874-25531-4-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Fri, 26 Jul 2013 14:44:33 +0000 (16:44 +0200)]
qemu-char: Register ring buffer driver with correct name "ringbuf"
The driver is new in 1.4, with the documented name "ringbuf".
However, it's actual name is the completely undocumented "memory".
Screwed up in commit
3949e59. Fix code to match documentation.
Keep the undocumented name working as an alias for compatibility.
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id:
1374849874-25531-3-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Fri, 26 Jul 2013 14:44:32 +0000 (16:44 +0200)]
Revert "chardev: Make the name of memory device consistent"
This reverts commit
6a85e60cb994bd95d1537aafbff65816f3de4637.
Commit
51767e7 "qemu-char: Add new char backend CirMemCharDriver"
introduced a memory ring buffer character device driver named
"memory". Commit
3949e59 "qemu-char: Saner naming of memchar stuff &
doc fixes" changed the driver name to "ringbuf", along with a whole
bunch of other names, with the following rationale:
Naming is a mess. The code calls the device driver
CirMemCharDriver, the public API calls it "memory", "memchardev",
or "memchar", and the special commands are named like
"memchar-FOO". "memory" is a particularly unfortunate choice,
because there's another character device driver called
MemoryDriver. Moreover, the device's distinctive property is that
it's a ring buffer, not that's in memory.
This is what we released in 1.4.0.
Unfortunately, the rename missed a critical instance of "memory": the
actual driver name. Thus, the new device could be used only by an
entirely undocumented name. The documented name did not work.
Bummer.
Commit
6a85e60 fixes this by changing the documentation to match the
code. It also changes some, but not all related occurences of
"ringbuf" to "memory". Left alone are identifiers in C code, HMP and
QMP commands. The latter are external interface, so they can't be
changed.
The result is an inconsistent mess. Moreover, "memory" is a rotten
name. The device's distinctive property is that it's a ring buffer,
not that's in memory. User's don't care whether it's in RAM, flash,
or carved into chocolate tablets by Oompa Loompas.
Revert the commit. Next commit will fix just the bug.
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id:
1374849874-25531-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Sat, 27 Jul 2013 15:42:01 +0000 (17:42 +0200)]
qapi.py: Permit comments starting anywhere on the line
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id:
1374939721-7876-10-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Sat, 27 Jul 2013 15:42:00 +0000 (17:42 +0200)]
qapi.py: Rename expr_eval to expr in parse_schema()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id:
1374939721-7876-9-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Sat, 27 Jul 2013 15:41:59 +0000 (17:41 +0200)]
qapi.py: Fix diagnosing non-objects at a schema's top-level
Report syntax error instead of crashing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id:
1374939721-7876-8-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Sat, 27 Jul 2013 15:41:58 +0000 (17:41 +0200)]
qapi.py: Fix schema parser to check syntax systematically
Fixes at least the following parser bugs:
* accepts any token in place of a colon
* treats comma as optional
* crashes when closing braces or brackets are missing
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id:
1374939721-7876-7-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Sat, 27 Jul 2013 15:41:57 +0000 (17:41 +0200)]
qapi.py: Reject invalid characters in schema file
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id:
1374939721-7876-6-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Sat, 27 Jul 2013 15:41:56 +0000 (17:41 +0200)]
qapi.py: Decent syntax error reporting
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id:
1374939721-7876-5-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Sat, 27 Jul 2013 15:41:55 +0000 (17:41 +0200)]
qapi.py: Restructure lexer and parser
The parser has a rather unorthodox structure:
Until EOF:
Read a section:
Generator function get_expr() yields one section after the
other, as a string. An unindented, non-empty line that
isn't a comment starts a new section.
Lexing:
Split section into a list of tokens (strings), with help
of generator function tokenize().
Parsing:
Parse the first expression from the list of tokens, with
parse(), throw away any remaining tokens.
In parse_schema(): record value of an enum, union or
struct key (if any) in the appropriate global table,
append expression to the list of expressions.
Return list of expressions.
Known issues:
(1) Indentation is significant, unlike in real JSON.
(2) Neither lexer nor parser have any idea of source positions. Error
reporting is hard, let's go shopping.
(3) The one error we bother to detect, we "report" via raise.
(4) The lexer silently ignores invalid characters.
(5) If everything in a section gets ignored, the parser crashes.
(6) The lexer treats a string containing a structural character exactly
like the structural character.
(7) Tokens trailing the first expression in a section are silently
ignored.
(8) The parser accepts any token in place of a colon.
(9) The parser treats comma as optional.
(10) parse() crashes on unexpected EOF.
(11) parse_schema() crashes when a section's expression isn't a JSON
object.
Replace this piece of original art by a thoroughly unoriginal design.
Takes care of (1), (2), (5), (6) and (7), and lays the groundwork for
addressing the others. Generated source files remain unchanged.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id:
1374939721-7876-4-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Sat, 27 Jul 2013 15:41:54 +0000 (17:41 +0200)]
tests: Use qapi-schema-test.json as schema parser test
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id:
1374939721-7876-3-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Sat, 27 Jul 2013 15:41:53 +0000 (17:41 +0200)]
tests: QAPI schema parser tests
The parser handles erroneous input badly. To be improved shortly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id:
1374939721-7876-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Sun, 28 Jul 2013 12:57:22 +0000 (14:57 +0200)]
memory: add tracepoints for MMIO reads/writes
This is quite handy to debug softmmu targets.
Reviewed-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id:
1375016242-32651-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Peter Maydell [Mon, 29 Jul 2013 11:22:11 +0000 (12:22 +0100)]
tpm.c: Don't try to put -1 in a variable of type TpmModel
The TpmModel type is an enum (valid values 0 and 1), which means
the compiler can legitimately decide that comparisons like
'tpm_models[i] == -1' are never true. (For example it could
pick 'unsigned char' as its type for representing the enum.)
Avoid this issue by using TPM_MODEL_MAX to mark entries in
the tpm_models[] array which aren't filled in, instead of -1.
This silences a clang warning:
tpm.c:43:27: error: comparison of constant -1 with expression of type
'enum TpmModel' is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (tpm_models[i] == -1) {
~~~~~~~~~~~~~ ^ ~~
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1375096931-13842-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Marcel Apfelbaum [Mon, 29 Jul 2013 14:17:45 +0000 (17:17 +0300)]
devices: Associate devices to their logical category
The category will be used to sort the devices displayed in
the command line help.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id:
1375107465-25767-4-git-send-email-marcel.a@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Marcel Apfelbaum [Mon, 29 Jul 2013 14:17:44 +0000 (17:17 +0300)]
qemu-help: Sort devices by logical functionality
Categorize devices that appear as output to "-device ?" command
by logical functionality. Sort the devices by logical categories
before showing them to user.
The sort is done by functionality rather than alphabetical.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id:
1375107465-25767-3-git-send-email-marcel.a@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Marcel Apfelbaum [Mon, 29 Jul 2013 14:17:43 +0000 (17:17 +0300)]
hw: import bitmap operations in qdev-core header
Made small tweaks in code to prevent compilation issues
when importing qemu/bitmap.h in qdev-core
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id:
1375107465-25767-2-git-send-email-marcel.a@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Alexey Kardashevskiy [Mon, 29 Jul 2013 04:48:39 +0000 (14:48 +1000)]
spapr-vscsi: fix SOLNT bit in SRP_RSP
The driver calculates SOLNT bit from UCSOLNT and SCSOLNT bits from
the request. The iu pointer has a type of srp_iu* which points to a union,
so cmd and rsp overlap. As the vscsi_send_rsp function calls
memset(iu, 0, sizeof(rsp)), it clears first 36 bytes of both cmd and rsp
so cmd.sol_not is always zero at the moment of calculating rsp.sol_not.
This fixes the bug.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id:
1375073319-17488-1-git-send-email-aik@ozlabs.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 18 Jul 2013 19:33:04 +0000 (14:33 -0500)]
xics: rename types to be sane and follow coding style
Basically, in HW the layout of the interrupt network is:
- One ICP per processor thread (the "presenter"). This contains the
registers to fetch a pending interrupt (ack), EOI, and control the
processor priority.
- One ICS per logical source of interrupts (ie, one per PCI host
bridge, and a few others here or there). This contains the per-interrupt
source configuration (target processor(s), priority, mask) and the
per-interrupt internal state.
Under PAPR, there is a single "virtual" ICS ... somewhat (it's a bit
oddball what pHyp does here, arguably there are two but we can ignore
that distinction). There is no register level access. A pair of firmware
(RTAS) calls is used to configure each virtual interrupt.
So our model here is somewhat the same. We have one ICS in the emulated
XICS which arguably *is* the emulated XICS, there's no point making it a
separate "device", that would just be gross, and each VCPU has an
associated ICP.
Yet we call the "XICS" struct icp_state and then the ICPs
'struct icp_server_state'. It's particularly confusing when all of the
functions have xics_prefixes yet take *icp arguments.
Rename:
struct icp_state -> XICSState
struct icp_server_state -> ICPState
struct ics_state -> ICSState
struct ics_irq_state -> ICSIRQState
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id:
1374175984-8930-12-git-send-email-aliguori@us.ibm.com
[aik: added ics_resend() on post_load]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Alexey Kardashevskiy [Thu, 18 Jul 2013 19:33:03 +0000 (14:33 -0500)]
pseries: savevm support with KVM
At present, the savevm / migration support for the pseries machine will not
work when KVM is enabled. That's because KVM manages the guest's hash page
table in the host kernel, so qemu has no visibility of it. This patch
fixes this by using new kernel interfaces to extract and reinsert the
guest's hash table during the migration process.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-id:
1374175984-8930-11-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
David Gibson [Thu, 18 Jul 2013 19:33:02 +0000 (14:33 -0500)]
pseries: savevm support for PCI host bridge
This adds the necessary support for saving the state of the PAPR virtual
PCI host bridge (or host bridges).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id:
1374175984-8930-10-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
David Gibson [Thu, 18 Jul 2013 19:33:01 +0000 (14:33 -0500)]
pseries: savevm support for pseries machine
This adds the necessary pieces to implement savevm / migration for the
pseries machine. The most complex part here is migrating the hash
table - for the paravirtualized pseries machine the guest's hash page
table is not stored within guest memory, but externally and the guest
accesses it via hypercalls.
This patch uses a hypervisor reserved bit of the HPTE as a dirty bit
(tracking changes to the HPTE itself, not the page it references).
This is used to implement a live migration style incremental save and
restore of the hash table contents.
Normally a hash table is 16MB but it can get bigger depending on how
much RAM the guest has. Due to its nature, updates to it are random so
the live migration style is used for it.
In addition it adds VMStateDescription information to save and restore
the (few) remaining pieces of state information needed by the pseries
machine.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id:
1374175984-8930-9-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
David Gibson [Thu, 18 Jul 2013 19:33:00 +0000 (14:33 -0500)]
pseries: savevm support for PAPR virtual SCSI
This patch adds the necessary support for saving the state of the PAPR VIO
virtual SCSI device. This also saves and restores active SCSI requests.
[aik: implemented vscsi_req save/restore]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id:
1374175984-8930-8-git-send-email-aliguori@us.ibm.com
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Alexey Kardashevskiy [Thu, 18 Jul 2013 19:32:59 +0000 (14:32 -0500)]
pseries: rework PAPR virtual SCSI
The patch reimplements handling of indirect requests in order to
simplify upcoming live migration support.
- all pointers (except SCSIRequest*) were replaces with integer
indexes and offsets;
- DMA'ed srp_direct_buf kept untouched (ie. BE format);
- vscsi_fetch_desc() is added, now it is the only place where
descriptors are fetched and byteswapped;
- vscsi_req struct fields converted to migration-friendly types;
- many dprintf()'s fixed.
This also removed an unused field 'lun' from the spapr_vscsi device
which is assigned, but never used. So, remove it.
[David Gibson: removed unused 'lun']
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id:
1374175984-8930-7-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 18 Jul 2013 19:32:58 +0000 (14:32 -0500)]
spapr-tce: make sPAPRTCETable a proper device
Model TCE tables as a device that's hooked up as a child object to
the owner. Besides the code cleanup, we get a few nice benefits:
1) free actually works now (it was dead code before)
2) the TCE information is visible in the device tree
3) we can expose table information as properties such that if we
change the window_size, we can use globals to keep migration
working.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id:
1374175984-8930-6-git-send-email-aliguori@us.ibm.com
[dwg: pseries: savevm support for PAPR TCE tables]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[alexey: ppc kvm: fix to compile]
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
David Gibson [Thu, 18 Jul 2013 19:32:57 +0000 (14:32 -0500)]
pseries: savevm support for PAPR VIO logical tty
This patch adds the necessary VMStateDescription information to support
savevm/loadvm for the spapr_tty (PAPR logical serial) device.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id:
1374175984-8930-5-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
David Gibson [Thu, 18 Jul 2013 19:32:56 +0000 (14:32 -0500)]
pseries: savevm support for PAPR VIO logical lan
This patch adds the necessary VMStateDescription information to support
savevm/loadvm for the spapr_llan (PAPR logical lan) device.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id:
1374175984-8930-4-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
David Gibson [Thu, 18 Jul 2013 19:32:55 +0000 (14:32 -0500)]
pseries: savevm support for VIO devices
This patch adds helpers to allow PAPR VIO devices to save state common
to all VIO devices during savevm.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id:
1374175984-8930-3-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Alexey Kardashevskiy [Thu, 18 Jul 2013 19:32:54 +0000 (14:32 -0500)]
target-ppc: Convert ppc cpu savevm to VMStateDescription
The savevm code for the powerpc cpu emulation is currently based around
the old register_savevm() rather than register_vmstate() method. It's also
rather broken, missing some important state on some CPU models.
This patch completely rewrites the savevm for target-ppc, using the new
VMStateDescription approach. Exactly what needs to be saved in what
configurations has been more carefully examined, too. This introduces a
new version (5) of the cpu save format. The old load function is retained
to support version 4 images.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id:
1374175984-8930-2-git-send-email-aliguori@us.ibm.com
[aik: ppc cpu savevm convertion fixed to use PowerPCCPU instead of CPUPPCState]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Hajnoczi [Mon, 29 Jul 2013 13:02:00 +0000 (15:02 +0200)]
dataplane: refuse to start if device is already in use
Dataplane must check whether a block device is in use before launching
the dataplane thread. This is necessary since the thread does not
synchronize with the main loop and I/O requests could cause corruption.
One example is when a drive is added and a block job is started before
hotplugging the virtio-blk-pci adapter. In this case we must not use
dataplane mode.
Cc: qemu-stable@nongnu.org
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Mon, 29 Jul 2013 13:01:59 +0000 (15:01 +0200)]
dataplane: enable virtio-blk x-data-plane=on live migration
Although the dataplane thread does not cooperate with dirty memory
logging yet it's fairly easy to temporarily disable dataplane during
live migration. This way virtio-blk can live migrate when
x-data-plane=on.
The dataplane thread will restart after migration is cancelled or if the
guest resuming virtio-blk operation after migration completes.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Mon, 29 Jul 2013 13:01:58 +0000 (15:01 +0200)]
migration: fix spice migration
Commit
29ae8a4133082e16970c9d4be09f4b6a15034617 ("rdma: introduce
MIG_STATE_NONE and change MIG_STATE_SETUP state transition") changed the
state transitions during migration setup.
Spice used to be notified with MIG_STATE_ACTIVE and it detected this
using migration_is_active(). Spice is now notified with
MIG_STATE_SETUP and migration_is_active() no longer works.
Replace migration_is_active() with migration_in_setup() to fix spice
migration.
Cc: Michael R. Hines <mrhines@us.ibm.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Mon, 29 Jul 2013 13:01:57 +0000 (15:01 +0200)]
migration: notify migration state before starting thread
The migration thread runs outside the QEMU global mutex when possible.
Therefore we must notify migration state change *before* starting the
migration thread.
This allows registered listeners to act before live migration iterations
begin. Therefore they can get into a state that allows for live
migration. When the migration thread starts everything will be ready.
Without this patch there is a race condition during migration setup,
depending on whether the migration thread has already transitioned from
SETUP to ACTIVE state.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Benoît Canet [Fri, 26 Jul 2013 20:39:22 +0000 (22:39 +0200)]
block: Repair the throttling code.
The throttling code was segfaulting since commit
02ffb504485f0920cfc75a0982a602f824a9a4f4 because some qemu_co_queue_next caller
does not run in a coroutine.
qemu_co_queue_do_restart assume that the caller is a coroutinne.
As suggested by Stefan fix this by entering the coroutine directly.
Also make sure like suggested that qemu_co_queue_next() and
qemu_co_queue_restart_all() can be called only in coroutines.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Paolo Bonzini [Fri, 19 Jul 2013 14:21:33 +0000 (19:51 +0530)]
gluster: Add image resize support
Implement .bdrv_truncate in GlusterFS block driver so that GlusterFS backend
can support image resizing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Tested-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Eduardo Habkost [Fri, 26 Jul 2013 20:09:36 +0000 (17:09 -0300)]
target-i386: Disable PMU CPUID leaf by default
Bug description: QEMU currently gets all bits from GET_SUPPORTED_CPUID
for CPUID leaf 0xA and passes them directly to the guest. This makes
the guest ABI depend on host kernel and host CPU capabilities, and
breaks live migration if we migrate between hosts with different
capabilities (e.g., different number of PMU counters).
Add a "pmu" property to X86CPU, and set it to true only on "-cpu host",
or on pc-*-1.5 and older machine-types.
For now, setting pmu=on will enable the current passthrough mode that
doesn't have any ABI stability guarantees, but in the future we may
implement a mode where the PMU CPUID bits are stable and configurable.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Eduardo Habkost [Fri, 26 Jul 2013 20:09:35 +0000 (17:09 -0300)]
target-i386: Pass X86CPU object to cpu_x86_find_by_name()
This will help us change the initialization code to not require carrying
some intermediate values in a x86_def_t struct (and eventually kill the
x86_def_t struct entirely).
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sat, 27 Jul 2013 00:53:25 +0000 (02:53 +0200)]
cpu: Partially revert "cpu: Change qemu_init_vcpu() argument to CPUState"
Commit
c643bed99 moved qemu_init_vcpu() calls to common CPUState code.
This causes x86 cpu-add to fail with "KVM: setting VAPIC address failed".
The reason for the failure is that CPUClass::kvm_fd is not yet
initialized in the following call graph:
->x86_cpu_realizefn
->x86_cpu_apic_realize
->qdev_init
->device_set_realized
->device_reset (hotplugged == 1)
->apic_reset_common
->vapic_base_update
->kvm_apic_vapic_base_update
This causes attempted KVM vCPU ioctls to fail.
By contrast, in the non-hotplug case the APIC is reset much later, when
the vCPU is already initialized.
As a quick and safe solution, move the qemu_init_vcpu() call back into
the targets' realize functions.
Reported-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Acked-by: Igor Mammedov <imammedo@redhat.com> (for i386)
Tested-by: Jia Liu <proljc@gmail.com> (for openrisc)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Anthony Liguori [Mon, 29 Jul 2013 12:30:31 +0000 (07:30 -0500)]
Merge remote-tracking branch 'sstabellini/xen-130729' into staging
# By Paul Durrant (1) and Stefano Stabellini (1)
# Via Stefano Stabellini
* sstabellini/xen-130729:
Xen PV Device
xen_disk: support "direct-io-safe" backend option
Message-id:
1375096790-12815-1-git-send-email-stefano.stabellini@eu.citrix.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Mon, 29 Jul 2013 12:30:21 +0000 (07:30 -0500)]
Merge remote-tracking branch 'agraf/s390-for-upstream' into staging
# By Alexander Graf (1) and others
# Via Alexander Graf
* agraf/s390-for-upstream:
s390: update s390-ccw.img
s390/ipl: Fix boot order
s390/IPL: Allow boot from other ssid than 0
Message-id:
1375092324-23943-1-git-send-email-agraf@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Mon, 29 Jul 2013 12:30:06 +0000 (07:30 -0500)]
Merge remote-tracking branch 'sweil/w32' into staging
# By Stefan Weil (10) and others
# Via Aurelien Jarno (1) and Stefan Weil (1)
* sweil/w32: (27 commits)
w32, w64: Add build rule for installer
target-mips: fix mipsdsp_mul_q31_q31
mips_malta: fix copy of the 0x1fc00000 region
linux-user: correct argument number for sys_mremap and sys_splice
target-mips: Remove assignment to a variable which is never used
target-mips: fix mipsdsp_trunc16_sat16_round
hw/mips: align initrd to 64KB to avoid kernel error
pflash_cfi01: duplicate status byte from bits 23:16 for 32bit reads
mips_malta: generate SMBUS EEPROM data
mips_malta: cap BIOS endian swap length at 0x3e0000 bytes
mips_malta: generate SPD EEPROM data at runtime
mips_malta: correct reading MIPS revision at 0x1fc00010
mips_malta: fix BIOS endianness swapping
mips_malta: QOM cast cleanup
target-mips: fix branch in likely delay slot tcg assert
target-mips: fix multiplication in mipsdsp_rndq15_mul_q15_q15
target-mips: Remove assignment to a variable which is never used
misc: Use g_assert_not_reached for code which is expected to be unreachable
qemu-options: mention C-a h in the -nographic doc
misc: Fix new typos in comments and strings
...
Message-id:
1374989579-24933-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paul Durrant [Mon, 29 Jul 2013 10:58:01 +0000 (10:58 +0000)]
Xen PV Device
Introduces a new Xen PV PCI device which will act as a binding point for
PV drivers for Xen.
The device has parameterized vendor-id, device-id and revision to allow to
be configured as a binding point for any vendor's PV drivers.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Stefano Stabellini [Mon, 29 Jul 2013 10:56:38 +0000 (10:56 +0000)]
xen_disk: support "direct-io-safe" backend option
Support backend option "direct-io-safe". This is documented as
follows in the Xen backend specification:
* direct-io-safe
* Values: 0/1 (boolean)
* Default Value: 0
*
* The underlying storage is not affected by the direct IO memory
* lifetime bug. See:
* http://lists.xen.org/archives/html/xen-devel/2012-12/msg01154.html
*
* Therefore this option gives the backend permission to use
* O_DIRECT, notwithstanding that bug.
*
* That is, if this option is enabled, use of O_DIRECT is safe,
* in circumstances where we would normally have avoided it as a
* workaround for that bug. This option is not relevant for all
* backends, and even not necessarily supported for those for
* which it is relevant. A backend which knows that it is not
* affected by the bug can ignore this option.
*
* This option doesn't require a backend to use O_DIRECT, so it
* should not be used to try to control the caching behaviour.
Also, BDRV_O_NATIVE_AIO is ignored if BDRV_O_NOCACHE, so clarify the
default flags passed to the qemu block layer.
The original proposal for a "cache" backend option has been dropped
because it was believed too wide, especially considering that at the
moment the backend doesn't have a way to tell the toolstack that it is
capable of supporting it.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Alexander Graf [Mon, 24 Jun 2013 12:56:51 +0000 (14:56 +0200)]
s390: update s390-ccw.img
This enables the following patches:
s390/IPL: Allow boot from other ssid than 0
s390/ipl: Fix spurious errors in virtio
Signed-off-by: Alexander Graf <agraf@suse.de>
Christian Borntraeger [Tue, 18 Jun 2013 12:31:52 +0000 (14:31 +0200)]
s390/ipl: Fix boot order
The latest ipl code adaptions collided with some of the virtio
refactoring rework. This resulted in always booting the first
disk. Let's fix booting from a given ID.
The new code also checks for command lines without bootindex to
avoid random behaviour when accessing dev_st (==0).
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Dominik Dingel [Mon, 17 Jun 2013 12:29:42 +0000 (14:29 +0200)]
s390/IPL: Allow boot from other ssid than 0
We now take the subchannel set id also into account to find the boot device.
If we want to use a subchannel set other than the default set 0, we first
need to enable the mss facility.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Stefan Weil [Mon, 15 Jul 2013 21:49:57 +0000 (23:49 +0200)]
w32, w64: Add build rule for installer
The new rules in Makefile allow building installers for QEMU on Windows
using NSIS, a package which is also available for Linux distributions
(so cross builds are possible).
The rules for NSIS are in qemu.nsi which also uses two new images.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Aurelien Jarno [Mon, 29 Jul 2013 07:03:23 +0000 (09:03 +0200)]
Merge branch 'trivial-patches' of git://git.corpit.ru/qemu
* 'trivial-patches' of git://git.corpit.ru/qemu:
target-mips: Remove assignment to a variable which is never used
misc: Use g_assert_not_reached for code which is expected to be unreachable
qemu-options: mention C-a h in the -nographic doc
misc: Fix new typos in comments and strings
linux-user: correct argument number for sys_mremap and sys_splice
PPC: dbdma: macio: Fix format specifiers (build regression)
watchdog: Remove break after exit
exec: Remove env from list of poisoned names
hw/9pfs: Fix potential memory leak and avoid reuse of freed memory
timer: make timers_state static
aes: Remove unused code (NDEBUG, u16)
Petar Jovanovic [Mon, 29 Jul 2013 02:06:12 +0000 (04:06 +0200)]
target-mips: fix mipsdsp_mul_q31_q31
Multiplication of two fractional word elements is not correct when sign
extension/promotion is needed. This change fixes it by adding correct
casts from unsigned to signed values.
In addition, the tests (dpaq_sa_l_w.c and dpsq_sa_l_w.c) have been extended
to trigger the current issue.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Mon, 29 Jul 2013 05:00:29 +0000 (07:00 +0200)]
mips_malta: fix copy of the 0x1fc00000 region
Copy the whole 0x1fe000000 region into 0x1fc00000, independently of the
loaded BIOS size. This fix the MIPS make check tests.
Reported-by: Andreas Färber <afaerber@suse.de>
Tested-by: Andreas Färber <afaerber@suse.de>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Petar Jovanovic [Tue, 23 Jul 2013 17:00:10 +0000 (19:00 +0200)]
linux-user: correct argument number for sys_mremap and sys_splice
sys_mremap missed 5th argument (new_address), which caused examples that
remap to a specific address to fail.
sys_splice missed 5th and 6th argument which caused different examples to
fail.
This change has an effect on MIPS target only.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Stefan Weil [Thu, 25 Jul 2013 20:10:31 +0000 (22:10 +0200)]
target-mips: Remove assignment to a variable which is never used
This assignment causes a compiler warning for compilations with the compiler
option -Wunused-but-set-variable (which is included with -Wextra).
Removing it allows using -Wextra for QEMU code without suppressing too many
extra warnings.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Petar Jovanovic [Sun, 30 Jun 2013 23:54:47 +0000 (01:54 +0200)]
target-mips: fix mipsdsp_trunc16_sat16_round
This change corrects rounding and saturation of Q31 fractional value in
mipsdsp_trunc16_sat16_round(). Overflow detection was incorrect for the
corner case for PRECRQ_RS.PH, and this test case is also part of the change.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
James Hogan [Thu, 27 Jun 2013 07:35:27 +0000 (08:35 +0100)]
hw/mips: align initrd to 64KB to avoid kernel error
The Linux kernel can be configured to use 64KB pages, but it also
requires initrd to be page aligned. Therefore, to be safe, align the
initrd to 64KB using a new INITRD_PAGE_MASK rather than
TARGET_PAGE_MASK.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Paul Burton [Fri, 14 Jun 2013 07:30:48 +0000 (08:30 +0100)]
pflash_cfi01: duplicate status byte from bits 23:16 for 32bit reads
The firmware commonly used with MIPS Malta boards (YAMON) reads the
status of the pflash with a 32bit memory access. On real hardware
this results in the status byte being mirrored in the upper 16 bits
of the read value. For example if the status byte is represented by
SS then the hardware reads 0x00SS00SS. The YAMON firmware compares the
status against 32bit values expecting the mirrored value and fails
without it.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Paul Burton [Fri, 14 Jun 2013 07:30:47 +0000 (08:30 +0100)]
mips_malta: generate SMBUS EEPROM data
The malta contains 2 EEPROMs, one containing SPD data for the SDRAM and
another containing board information such as serial number and MAC
address. These are both exposed via the PIIX4 SMBUS. Generating this
data and providing it to smbus_eeprom_init will allow YAMON to read a
serial number for the board and prevent it from warning that the EEPROM
data is invalid.
We already have the contents of the SPD EEPROM which are exposed via
FPGA I2C accesses, this is provided as part of the SMBUS EEPROM data
too for consistency.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Paul Burton [Fri, 14 Jun 2013 07:30:46 +0000 (08:30 +0100)]
mips_malta: cap BIOS endian swap length at 0x3e0000 bytes
This preserves the final sector of the pflash which is used by YAMON to
hold environment variables. If the endianness of the environment data
is swapped then YAMON will fail to load environment variables from
pflash.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Paul Burton [Fri, 14 Jun 2013 07:30:45 +0000 (08:30 +0100)]
mips_malta: generate SPD EEPROM data at runtime
The SPD EEPROM specifies the amount of memory present in the system and
thus its correct contents can only be known at runtime. Calculating
parts of the data on init allows the data to accurately reflect the
amount of target memory present and allow YAMON to boot with an
arbitrary amount of SDRAM.
Where possible the SPD data will favor indicating 2 banks of SDRAM
rather than 1. For example the default 128MB of target memory will be
represented as 2x64MB banks rather than 1x128MB bank. This allows
versions of MIPS BIOS code (such as YAMON 2.22 and older) to boot
despite a bug preventing them from handling a single bank of SDRAM with
the Galileo GT64120 system controller emulated by QEMU.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Paul Burton [Fri, 14 Jun 2013 07:30:44 +0000 (08:30 +0100)]
mips_malta: correct reading MIPS revision at 0x1fc00010
Rather than modifying the BIOS code at its original location, copy it
for the 0x1fc00000 region & modify the copy. This means the original
ROM code is correctly readable at 0x1e000010 whilst the MIPS revision
is readable at 0x1fc00010.
Additionally the code previously operated on target memory which would
later be overwritten by the BIOS image upon CPU reset if the -bios
argument was used to specify the BIOS image. This led to the written
MIPS revision being lost. Copying using rom_copy when -bios is used
fixes this issue.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Paul Burton [Fri, 14 Jun 2013 07:30:43 +0000 (08:30 +0100)]
mips_malta: fix BIOS endianness swapping
If the target is little endian (mipsel) then the BIOS image endianness
is swapped so that the big endian BIOS binaries commonly produced can be
loaded correctly.
When using the -bios argument the BIOS is loaded using
load_image_targphys, however this doesn't perform the load to target
memory immediately. Instead it loads the BIOS file into a struct Rom
which will later be written to target memory upon reset. However the
endianness conversion was being performed before this, on init, and
operating on the target memory which at this point is blank & will later
be overwritten by the (big endian) BIOS image. Correct this by operating
on the data referenced by struct Rom rather than the target memory when
the -bios argument is used.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Andreas Färber [Sat, 27 Jul 2013 20:19:54 +0000 (22:19 +0200)]
mips_malta: QOM cast cleanup
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
James Hogan [Mon, 24 Jun 2013 16:45:39 +0000 (17:45 +0100)]
target-mips: fix branch in likely delay slot tcg assert
When a branch delay slot contains another branch instruction, the code
generated raises an exception, however since is_branch==1,
handle_delay_slot() doesn't get called immediately. This means
ctx->bstate isn't set to BS_BRANCH, and the decoder continues decoding
until a non-branch instruction is found.
If the first branch was a branch likely instruction then each
instruction after it generates code for the unlikely case, to go to the
next tb starting after the delay slot. This results in multiple goto_tb
tcg ops being generated with the same exit number. When debug is enabled
this hits:
tcg-op.h:2589: tcg_gen_goto_tb: Assertion `(tcg_ctx.goto_tb_issue_mask & (1 << idx)) == 0' failed.
This is fixed by removing is_branch entirely, and calling
handle_delay_slot() if (ctx.hflags & MIPS_HFLAG_BMASK) was set prior to
the current instruction being decoded. This still prevents
handle_delay_slot() being called immediately after a branch but allows
it to still be called after a branch within a delay slot.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Petar Jovanovic [Thu, 23 May 2013 17:37:53 +0000 (19:37 +0200)]
target-mips: fix multiplication in mipsdsp_rndq15_mul_q15_q15
Multiplication of Q15 fractional halfword vectors was incorrect in the
previous implementation of mipsdsp_rndq15_mul_q15_q15. It failed to take
element signs into account. This change fixes it, and it adds a test case
for it.
The change also removes unnecessary cast in the function
mipsdsp_mul_q15_q15_overflowflag21().
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Stefan Weil [Thu, 25 Jul 2013 20:10:31 +0000 (22:10 +0200)]
target-mips: Remove assignment to a variable which is never used
This assignment causes a compiler warning for compilations with the compiler
option -Wunused-but-set-variable (which is included with -Wextra).
Removing it allows using -Wextra for QEMU code without suppressing too many
extra warnings.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Stefan Weil [Thu, 25 Jul 2013 16:21:28 +0000 (18:21 +0200)]
misc: Use g_assert_not_reached for code which is expected to be unreachable
The macro g_assert_not_reached is a better self documenting replacement
for assert(0) or assert(false).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Ramkumar Ramachandra [Sat, 20 Jul 2013 11:23:09 +0000 (16:53 +0530)]
qemu-options: mention C-a h in the -nographic doc
Otherwise, a new user will be wondering how to switch between the
console and monitor.
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Stefan Weil [Wed, 24 Jul 2013 17:48:56 +0000 (19:48 +0200)]
misc: Fix new typos in comments and strings
All these typos were found by codespell.
sould -> should
emperical -> empirical
intialization -> initialization
successfuly -> successfully
gaurantee -> guarantee
Fix also another error (before before) in the same context.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Petar Jovanovic [Tue, 23 Jul 2013 17:00:10 +0000 (19:00 +0200)]
linux-user: correct argument number for sys_mremap and sys_splice
sys_mremap missed 5th argument (new_address), which caused examples that
remap to a specific address to fail.
sys_splice missed 5th and 6th argument which caused different examples to
fail.
This change has an effect on MIPS target only.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Stefan Weil [Fri, 12 Jul 2013 16:48:39 +0000 (18:48 +0200)]
PPC: dbdma: macio: Fix format specifiers (build regression)
Fix a number of warnings for 32 bit builds (tested on MingW and Linux):
CC hw/ide/macio.o
qemu/hw/ide/macio.c: In function 'pmac_ide_atapi_transfer_cb':
qemu/hw/ide/macio.c:134:9: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'hwaddr' [-Werror=format]
qemu/hw/ide/macio.c: In function 'pmac_ide_transfer_cb':
qemu/hw/ide/macio.c:215:5: error: format '%ld' expects argument of type 'long int', but argument 5 has type 'int64_t' [-Werror=format]
qemu/hw/ide/macio.c:222:9: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'hwaddr' [-Werror=format]
qemu/hw/ide/macio.c:264:9: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'hwaddr' [-Werror=format]
cc1: all warnings being treated as errors
make: *** [hw/ide/macio.o] Error 1
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Stefan Weil [Tue, 23 Jul 2013 04:46:49 +0000 (06:46 +0200)]
watchdog: Remove break after exit
This was dead code.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Stefan Weil [Sun, 21 Jul 2013 14:43:14 +0000 (16:43 +0200)]
exec: Remove env from list of poisoned names
The global variable env was removed some time ago, so this name may be
used without any restriction now.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Stefan Weil [Sun, 16 Jun 2013 10:14:36 +0000 (12:14 +0200)]
hw/9pfs: Fix potential memory leak and avoid reuse of freed memory
The leak was reported by cppcheck.
Function proxy_init also calls g_free for ctx->fs_root.
Avoid reuse of this memory by setting ctx->fs_root to NULL.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Liu Ping Fan [Sun, 21 Jul 2013 08:43:00 +0000 (08:43 +0000)]
timer: make timers_state static
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Stefan Weil [Sat, 29 Jun 2013 15:10:48 +0000 (15:10 +0000)]
aes: Remove unused code (NDEBUG, u16)
The current code includes assert.h very early (from qemu-common.h),
so the definition of NDEBUG was without any effect.
In the initial version from 2004, NDEBUG was used to disable the assertions.
Those assertions are not in time critical code, so it is no longer
reasonable to disable them and the definition of NDEBUG can be removed.
Type u16 is also unused and therefore does not need a type definition.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Anthony Liguori [Fri, 26 Jul 2013 22:53:19 +0000 (17:53 -0500)]
Merge remote-tracking branch 'afaerber/tags/qom-cpu-for-anthony' into staging
QOM CPUState refactorings
* Fix cpu_memory_rw_debug() breakage in s390x KVM
* Replace final CPUArchState in sysemu/kvm.h
* Introduce model subclasses for XtensaCPU
* Introduce CPUClass::gdb_num[_core]_regs
* Introduce CPUClass::gdb_core_xml_file
* Introduce CPUClass::gdb_{read,write}_register()
* Propagate CPUState further in gdbstub
# gpg: Signature made Fri 26 Jul 2013 05:04:28 PM CDT using RSA key ID
3E7E013F
# gpg: Can't check signature: public key not found
# By Andreas Färber (23) and others
# Via Andreas Färber
* afaerber/tags/qom-cpu-for-anthony: (25 commits)
cpu: Introduce CPUClass::gdb_core_xml_file for GDB_CORE_XML
target-cris: Factor out CPUClass::gdb_read_register() hook for v10
cpu: Introduce CPUClass::gdb_{read,write}_register()
gdbstub: Replace GET_REG*() macros with gdb_get_reg*() functions
target-xtensa: Move cpu_gdb_{read,write}_register()
target-lm32: Move cpu_gdb_{read,write}_register()
target-s390x: Move cpu_gdb_{read,write}_register()
target-alpha: Move cpu_gdb_{read,write}_register()
target-cris: Move cpu_gdb_{read,write}_register()
target-microblaze: Move cpu_gdb_{read,write}_register()
target-sh4: Move cpu_gdb_{read,write}_register()
target-openrisc: Move cpu_gdb_{read,write}_register()
target-mips: Move cpu_gdb_{read,write}_register()
target-m68k: Move cpu_gdb_{read,write}_register()
target-arm: Move cpu_gdb_{read,write}_register()
target-sparc: Move cpu_gdb_{read,write}_register()
target-ppc: Move cpu_gdb_{read,write}_register()
target-i386: Move cpu_gdb_{read,write}_register()
cpu: Introduce CPUState::gdb_num_regs and CPUClass::gdb_num_core_regs
gdbstub: Drop dead code in cpu_gdb_{read,write}_register()
...
Andreas Färber [Sun, 7 Jul 2013 13:08:22 +0000 (15:08 +0200)]
cpu: Introduce CPUClass::gdb_core_xml_file for GDB_CORE_XML
Replace the GDB_CORE_XML define in gdbstub.c with a CPUClass field.
Use first_cpu for qSupported and qXfer:features:read: for now.
Add a stub for xml_builtin.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sun, 7 Jul 2013 12:39:41 +0000 (14:39 +0200)]
target-cris: Factor out CPUClass::gdb_read_register() hook for v10
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sat, 29 Jun 2013 02:18:45 +0000 (04:18 +0200)]
cpu: Introduce CPUClass::gdb_{read,write}_register()
Completes migration of target-specific code to new target-*/gdbstub.c.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sun, 7 Jul 2013 11:05:05 +0000 (13:05 +0200)]
gdbstub: Replace GET_REG*() macros with gdb_get_reg*() functions
This avoids polluting the global namespace with a non-prefixed macro and
makes it obvious in the call sites that we return.
Semi-automatic conversion using, e.g.,
sed -i 's/GET_REGL(/return gdb_get_regl(mem_buf, /g' target-*/gdbstub.c
followed by manual tweaking for sparc's GET_REGA() and Coding Style.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sun, 7 Jul 2013 10:57:38 +0000 (12:57 +0200)]
target-xtensa: Move cpu_gdb_{read,write}_register()
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sun, 7 Jul 2013 10:55:44 +0000 (12:55 +0200)]
target-lm32: Move cpu_gdb_{read,write}_register()
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sun, 7 Jul 2013 10:54:12 +0000 (12:54 +0200)]
target-s390x: Move cpu_gdb_{read,write}_register()
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sun, 7 Jul 2013 10:52:32 +0000 (12:52 +0200)]
target-alpha: Move cpu_gdb_{read,write}_register()
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sun, 7 Jul 2013 10:50:22 +0000 (12:50 +0200)]
target-cris: Move cpu_gdb_{read,write}_register()
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sun, 7 Jul 2013 10:45:47 +0000 (12:45 +0200)]
target-microblaze: Move cpu_gdb_{read,write}_register()
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sun, 7 Jul 2013 10:42:52 +0000 (12:42 +0200)]
target-sh4: Move cpu_gdb_{read,write}_register()
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sun, 7 Jul 2013 10:40:38 +0000 (12:40 +0200)]
target-openrisc: Move cpu_gdb_{read,write}_register()
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Mark Cave-Ayland [Fri, 26 Jul 2013 20:42:51 +0000 (21:42 +0100)]
sun4m: add display width and height to the firmware configuration
Currently the graphics resolution for TCX is fixed at 1024x768, however
other framebuffers are capable of supporting additional resolutions.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Anthony Liguori <aliguori@us.ibm.com>
CC: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Fri, 26 Jul 2013 21:54:19 +0000 (16:54 -0500)]
Merge remote-tracking branch 'kwolf/for-anthony' into staging
# By Kevin Wolf (16) and Ian Main (2)
# Via Kevin Wolf
* kwolf/for-anthony:
Add tests for sync modes 'TOP' and 'NONE'
Implement sync modes for drive-backup.
Implement qdict_flatten()
blockdev: Split up 'cache' option
blockdev: Rename 'readonly' option to 'read-only'
qcow2: Use dashes instead of underscores in options
blockdev: Rename I/O throttling options for QMP
QemuOpts: Add qemu_opt_unset()
block: Allow "driver" option on the top level
qapi: Anonymous unions
qapi.py: Maintain a list of union types
qapi: Add consume argument to qmp_input_get_object()
qapi: Flat unions with arbitrary discriminator
qapi: Add visitor for implicit structs
docs: Document QAPI union types
qapi-visit.py: Implement 'base' for unions
qapi-visit.py: Split off generate_visit_struct_fields()
qapi-types.py: Implement 'base' for unions
Message-id:
1374870032-31672-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Eduardo Otubo [Mon, 22 Jul 2013 18:33:37 +0000 (15:33 -0300)]
seccomp: removing unused syscalls gtom whitelist
v3 update:
- reincluding getrlimit(), it is used by Xen.
v2 update:
- reincluding setrlimit(), it is used by Xen.
Signed-off-by: Eduardo Otubo <otubo@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id:
1374518017-10424-3-git-send-email-otubo@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Eduardo Otubo [Mon, 22 Jul 2013 18:33:36 +0000 (15:33 -0300)]
seccomp: no need to check arch in syscall whitelist
v2 update:
- set libseccomp 2.1.0 as requirement on configure script.
Since libseccomp 2.0 there's no need to check the architecture type
anymore.
Signed-off-by: Eduardo Otubo <otubo@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id:
1374518017-10424-2-git-send-email-otubo@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Andreas Färber [Sun, 7 Jul 2013 10:38:42 +0000 (12:38 +0200)]
target-mips: Move cpu_gdb_{read,write}_register()
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sun, 7 Jul 2013 10:33:56 +0000 (12:33 +0200)]
target-m68k: Move cpu_gdb_{read,write}_register()
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sun, 7 Jul 2013 10:32:15 +0000 (12:32 +0200)]
target-arm: Move cpu_gdb_{read,write}_register()
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sun, 7 Jul 2013 10:29:26 +0000 (12:29 +0200)]
target-sparc: Move cpu_gdb_{read,write}_register()
Signed-off-by: Andreas Färber <afaerber@suse.de>