OSDN Git Service
EGRY Gabor [Fri, 11 Jan 2008 22:55:20 +0000 (23:55 +0100)]
kconfig: whitespace removing
This patch removes the unnecessary whitespaces from
end of help lines of Kconfig files.
Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
EGRY Gabor [Fri, 11 Jan 2008 22:40:00 +0000 (23:40 +0100)]
kconfig: update-po-config info
This patch adds tracking messages.
Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Valdis.Kletnieks@vt.edu [Sat, 29 Dec 2007 02:22:48 +0000 (21:22 -0500)]
kbuild: document 'make prepare' in 'make help'
The output of 'make help' covers a lot of options, but doesn't include
a listing for 'make prepare'. Here's a one-liner to fix that...
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Jan Beulich [Fri, 11 Jan 2008 09:09:00 +0000 (09:09 +0000)]
kbuild: scripts/mkmakefile: dynamic determination of output directory
Rather than fixing the output directory in the generated Makefile,
determine it from the placement of Makefile. This allows moving
the build tree around or accessing it through different mount paths.
(The lastword definition is a compatibility one for make prior to 3.81;
newer make will simply ignore it and use the [faster] built-in.)
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Sam Ravnborg [Fri, 11 Jan 2008 18:17:15 +0000 (19:17 +0100)]
kbuild: clean up modpost.c
akpm complained about overly long lines in modpost.c and
when started additional style issues were fixed:
o Updated my copyright
o Removed unneeded {}
o Drop assignments in if ()
o Spaces around operators
o Break long lines
o locate * near variable not type
o Fix a format specifier for sizeof()
o Corrected placement of '{' and '}'
o spaces to tabs (but use tabs only for indention)
modpost.c is not checkpatch clean. Readability were favoured
on top of checkpatch compliance.
But checkpatch were used to find additional stuff to clean up.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Ladislav Michl [Wed, 9 Jan 2008 15:36:19 +0000 (16:36 +0100)]
kconfig: use C89 random functions in conf.c
rand and srand functions conform also to C89 in addition to POSIX.1-2001,
which makes them a bit more portable (work also on MinGW host). Linux man
page also says:
"The versions of rand() and srand() in the Linux C Library use the same
random number generator as random() and srandom()".
* Use C89 conformant functions rand() and srand()
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Ladislav Michl [Wed, 9 Jan 2008 15:36:19 +0000 (16:36 +0100)]
kconfig: fix whitespace and sort includes in conf.c
Sort includes and remove leading whitespace.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org
Uwe Kleine-König [Tue, 8 Jan 2008 14:16:24 +0000 (15:16 +0100)]
kbuild: ignore cache modifiers for generating the tags files
With this patch I'm able to find the definition of _xmit_lock defined in
include/linux/netdevice.h as follows:
struct net_device {
...
spinlock_t _xmit_lock ____cacheline_aligned_in_smp;
}
Otherwise this counts as definition of ____cacheline_aligned_in_smp.
Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Sam Ravnborg [Mon, 7 Jan 2008 20:13:04 +0000 (21:13 +0100)]
kconfig: delete unused FILE_ and SYMBOL_ flags
The *_PRINTED flags were never used - so delete them.
Do we need them later then we can re-add them.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Sam Ravnborg [Mon, 7 Jan 2008 20:09:55 +0000 (21:09 +0100)]
kconfig: rename E_OR & friends to avoid name clash
We had macros named the same as a set of enumeration values.
It is legal code but very confusing to read - so rename
the macros from E_* to EXPR_*
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Jan Engelhardt [Thu, 3 Jan 2008 22:33:44 +0000 (23:33 +0100)]
kconfig: allow overriding symbols
Allow config variables in .config to override earlier ones in the same
file. In other words,
# CONFIG_SECURITY is not defined
CONFIG_SECURITY=y
will activate it. This makes it a bit easier to do
cat original-config myconfig myconfig2 ... >.config;
and run *config as expected.
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Ladislav Michl [Mon, 17 Dec 2007 18:07:41 +0000 (19:07 +0100)]
kconfig: make kconfig MinGW friendly
Kconfig is powerfull tool. So powerfull that more and more software
projects are using it for configuration. So instead of fixing some of
them one by one, lets fix it in kernel and wait for sync.
This work was originaly done for PTXdist - GPL licensed build system for
userlands and cross-compilers, but it will not hurt kernel kconfig
either. PTXdist menuconfig now works on Windows linked with PDCurses and
compiled using MinGW - there is no termios and signals.
* Do not include <sys/wait.h> and <signal.h> (comes from times when
lxdialog was separate process)
* Do not mess with termios directly and let curses tell screen size.
Comment to commit
c8dc68ad0fbd934e78e913b8a8d7b45945db4930 says
check for screen size could be removed later, but because it didn't
happen for more than year I left it here as well.
* Save cursor position added by Sam
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Randy Dunlap [Tue, 13 Nov 2007 00:17:55 +0000 (16:17 -0800)]
kconfig: add hints/tips/tricks to Documentation/kbuild/kconfig-language.txt
Add a section on kconfig hints: how to do <something> in Kconfig files.
Fix a few typos/spellos.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Theodore Ts'o [Sat, 3 Nov 2007 01:53:01 +0000 (21:53 -0400)]
kbuild: fix false positive -dirty tag caused by make-kpkg
make-kpkg modifies scripts/package/Makefile and deletes
scripts/package/builddeb as part of its build process. Ignore these
changes so the tree isn't marked as -dirty, when it is just an
artifact of make-kpkg. (make-kpkg clean restores the files to their
original state, and these helper scripts won't affect the final
compiled kernel in any way.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Theodore Ts'o [Sat, 3 Nov 2007 01:53:00 +0000 (21:53 -0400)]
kbuild: fix scripts/setlocalversion to avoid erroneous -dirty tag
If git's index file is out of date, and some files have been touched
such that their timestamp doesn't what is in the index, "git
diff-index HEAD" may show that a particular file is dirty, when in
fact it really isn't. Running "git update-index" will update the
index to avoid these false positives.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Theodore Ts'o [Sat, 3 Nov 2007 01:52:59 +0000 (21:52 -0400)]
kbuild: change CONFIG_LOCALVERSION_AUTO to use a git-describe-ish format
Change the automatic local version to have the form -nnnnn-gSHA1SUMID,
where 'nnnnn' is the number of commits since the last tag (i.e.,
2.6.21-rc7). This makes it much more likely that the package names created
for the kernel will look "newer" to a package manager.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Andreas Mohr [Sat, 17 Nov 2007 20:51:25 +0000 (21:51 +0100)]
kbuild: eradicate bashisms in scripts/patch-kernel
Make the patch-kernel shell script sufficiently compatible with POSIX
shells, i.e., remove bashisms from scripts/patch-kernel.
This means that it now also works on dash 0.5.3-5
and still works on bash 3.1dfsg-8.
Full changelog:
- replaced non-standard "==" by standard "="
- replaced non-standard "source" statement by POSIX "dot" command
- use leading ./ on mktemp filename to force the tempfile to a local
directory, so that the search path is not used
- replace bash syntax to remove leading dot by similar POSIX syntax
- added missing (optional/not required) $ signs to shell variable names
Signed-off-by: Andreas Mohr <andi@lisas.de>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
WANG Cong [Wed, 2 Jan 2008 05:55:33 +0000 (13:55 +0800)]
FS: Remove dead code
Remove dead code in smbfs makefile.
Cc: Al Viro <viro@www.linux.org.uk>
Cc: Tim Shimmin <xfs-masters@oss.sgi.com>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
WANG Cong [Tue, 1 Jan 2008 14:00:04 +0000 (22:00 +0800)]
FRV: Drop 'TOPDIR' from Makefiles
This patch drops TOPDIR from frv Makefiles.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
WANG Cong [Tue, 1 Jan 2008 13:41:08 +0000 (21:41 +0800)]
INFINIBAND: Remove 'TOPDIR' from Makefiles
This patch removes TOPDIR from infiniband Makefile and delete
one include statement pointing to a non-existing directory
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <mshefty@ichips.intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
WANG Cong [Wed, 2 Jan 2008 06:27:59 +0000 (14:27 +0800)]
CRIS: Remove 'TOPDIR' from Makefiles
This patch removes TOPDIR from Cris Makefiles.
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Andreas Schwab <schwab@suse.de>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Sam Ravnborg [Tue, 1 Jan 2008 12:40:28 +0000 (13:40 +0100)]
kbuild: fix installing external modules
Eric Sandeen <sandeen@redhat.com> reported:
Installing external modules is supposed to put them in some path
under /lib/modules/<version>/extra/subdir/, but this change:
http://linux.bkbits.net:8080/linux-2.6/?PAGE=cset&REV=1.1982.9.23
makes them go under /lib/modules/<version>/extrasubdir
(for example, make M=fs/ext3 modules_install puts ext3.ko in
/lib/modules/<version>/extrafs/ext3.ko)
This was the case only when specifying a trailing slash to M=..
Fixed by removing trailing slash if present so
we correctly match dir part of target.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Eric Sandeen <sandeen@redhat.com>
Robert P. J. Day [Mon, 31 Dec 2007 13:58:38 +0000 (14:58 +0100)]
A few corrections to include/linux/Kbuild
auxvec.h, i2c-dev.h and vt.h *should* be unifdef'ed i2o-dev.h does not need
unifdef'ing
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Mike Frysinger [Sat, 10 Nov 2007 14:32:20 +0000 (09:32 -0500)]
kbuild: fixup genksyms usage/getopt
The usage does not mention the "-a,--arch" or "-T,--dump-types" options, so
add them. The calls to getopt() seem to mention options that no longer exist
(some "k" and "p" thingy) but omits the "h" option which means using '-h'
actually triggers the error code path, so update those as well.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Sam Ravnborg [Mon, 31 Dec 2007 13:26:12 +0000 (14:26 +0100)]
kbuild: ignore *.order files
Introducing the new modules.order patch created a number
of additional files. Teach git to ignore them.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Tejun Heo <htejun@gmail.com>
Sam Ravnborg [Mon, 31 Dec 2007 13:22:55 +0000 (14:22 +0100)]
kbuild: fix buglet in gcc-version.sh
Greg Schafer <gschafer@zip.com.au> reported:
====
$make mrproper
scripts/gcc-version.sh: [[: command not found
This is on a very old host with an ancient bash as /bin/sh. But I have
CONFIG_SHELL set and pointing to a modern bash. Something is wrong.
This doesn't happen with 2.6.23
====
Fixed using a more common string equality test.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Greg Schafer <gschafer@zip.com.au>
Cc: Jesper Juhl <jesper.juhl@gmail.com>
Robert P. J. Day [Thu, 29 Nov 2007 15:46:38 +0000 (10:46 -0500)]
Kbuild: Clarify the rpm-related make packaging targets
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Aron Griffis [Wed, 28 Nov 2007 21:55:44 +0000 (16:55 -0500)]
kbuild: support mercurial in setlocalversion
This represents mercurial changesets similarly to git. For untagged
revisions, append the changeset id. If there are uncommitted changes,
append -dirty. For example, -hgc60016ba6237-dirty
Signed-off-by: Aron Griffis <aron@hp.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Andres Salomon [Mon, 17 Dec 2007 06:34:58 +0000 (01:34 -0500)]
kconfig: use getopt() in conf.c for handling command line arguments
Switch from doing our own parsing of command line arguments to
using getopt(3) to do it. Aside from simplifying things, this allows us to
specify multiple arguments; the old code could only accept two arguments
(input_mode and kconfig name).
Note some subtle changes:
- The argument '-?' is no longer supported.
- '-h' is not treated as an error, so output goes to stdout, and we
exit with '0'.
- There is no compatibility checking amongst arguments; the last option
will simply override earlier options. For example, 'conf -n -y foo'
is perfectly valid now (input_mode will be set_yes). Previously, that
would have been an error ("can't find file -y").
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Andi Kleen [Thu, 22 Nov 2007 02:43:10 +0000 (03:43 +0100)]
kbuild: fix a buffer overflow in modpost
When passing an file name > 1k the stack could be overflowed.
Not really a security issue, but still better plugged.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Andi Kleen [Thu, 22 Nov 2007 02:43:09 +0000 (03:43 +0100)]
kbuild: fix format string warnings in modpost
Fix wrong format strings in modpost exposed by the previous patch.
Including one missing argument -- some random data was printed instead.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Andi Kleen [Thu, 22 Nov 2007 02:43:08 +0000 (03:43 +0100)]
kbuild: declare the modpost error functions as printf like
This way gcc can warn for wrong format strings
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Sam Ravnborg [Sun, 9 Dec 2007 19:11:15 +0000 (20:11 +0100)]
kconfig: if ncurses-devel is missing then say so
With this patch when ncurses-devel (or whatever it is named)
is missing trying to run menuconfig will result in this:
$ make menuconfig
HOSTCC scripts/kconfig/conf.o
HOSTCC scripts/kconfig/kxgettext.o
*** Unable to find the ncurses libraries or the
*** required header files.
*** 'make menuconfig' requires the ncurses libraries.
***
*** Install ncurses (ncurses-devel) and try again.
***
make[1]: *** [scripts/kconfig/dochecklxdialog] Error 1
make: *** [menuconfig] Error 2
Much better than before where we just listed some build errors.
The other *config targets will work indepenednt on ncurses
being present or not.
Includes improvements suggested by: Frans Pop <elendil@planet.nl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Frans Pop <elendil@planet.nl>
Tejun Heo [Fri, 7 Dec 2007 12:04:30 +0000 (21:04 +0900)]
kbuild: implement modules.order
When multiple built-in modules (especially drivers) provide the same
capability, they're prioritized by link order specified by the order
listed in Makefile. This implicit ordering is lost for loadable
modules.
When driver modules are loaded by udev, what comes first in
modules.alias file is selected. However, the order in this file is
indeterministic (depends on filesystem listing order of installed
modules). This causes confusion.
The solution is two-parted. This patch updates kbuild such that it
generates and installs modules.order which contains the name of
modules ordered according to Makefile. The second part is update to
depmod such that it generates output files according to this file.
Note that both obj-y and obj-m subdirs can contain modules and
ordering information between those two are lost from beginning.
Currently obj-y subdirs are put before obj-m subdirs.
Sam Ravnborg cleaned up Makefile modifications and suggested using awk
to remove duplicate lines from modules.order instead of using separate
C program.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Bill Nottingham <notting@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Jon Masters <jonathan@jonmasters.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Johannes Berg [Thu, 8 Nov 2007 11:59:13 +0000 (12:59 +0100)]
convert drivers/base/power/Makefile to ccflags
This patch converts drivers/base/power/Makefile to use ccflags instead
of EXTRA_CFLAGS.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Geert Uytterhoeven [Mon, 5 Nov 2007 10:51:44 +0000 (11:51 +0100)]
kbuild: Add missing srctree prefix for includecheck and versioncheck
Add missing $(srctree)/ prefix for scripts used by the includecheck and
versioncheck make targets
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Sam Ravnborg [Wed, 14 Nov 2007 20:34:55 +0000 (21:34 +0100)]
kbuild: document versioncheck in make help
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Randy Dunlap [Sun, 4 Nov 2007 20:01:55 +0000 (12:01 -0800)]
kbuild: add 'includecheck' help text
Add 'includecheck' to the Static analyzers help list.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Johannes Berg [Wed, 24 Oct 2007 22:08:48 +0000 (15:08 -0700)]
kernel-doc: new P directive for DOC: sections
The !P directive includes the contents of a DOC: section
given by title, e.g.
!Pfilename Title of the section
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Johannes Berg [Wed, 24 Oct 2007 22:08:48 +0000 (15:08 -0700)]
kernel-doc: use no-doc option
When asked by a template to include all functions from a file,
it will also include DOC: sections wreaking havoc in the generated
docbook file. This patch makes it use the new -no-doc-sections
flag for kernel-doc to avoid this.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Johannes Berg [Wed, 24 Oct 2007 22:08:48 +0000 (15:08 -0700)]
kernel-doc: process functions, not DOC:
This flag is necessary for the next patch for docproc to output
only the functions and not DOC: sections when a function list
is requested.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Johannes Berg [Wed, 24 Oct 2007 22:08:48 +0000 (15:08 -0700)]
kernel-doc: single DOC: selection
Currently, DOC: sections are always output even if only a single
function is requested, fix this and also make it possible to just
output a single DOC: section by giving its title as the function
name to output.
Also fixes docbook XML well-formedness for sections with examples.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Johannes Berg [Wed, 24 Oct 2007 22:08:48 +0000 (15:08 -0700)]
kernel-doc: init kernel version
The kernel-doc script triggers a perl warning when invoked
without KERNELVERSION in the environment, rather make it use
the string "unknown kernel version" instead.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Johannes Berg [Wed, 24 Oct 2007 22:08:48 +0000 (15:08 -0700)]
kernel-doc: fix xml output mode
After Randy's patch fixing the HTML output in DOC: sections
(
6b5b55f6c404fa730a09a8254eb19f5a038afcc2) the same bug remained in XML
mode, this fixes it.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Linus Torvalds [Mon, 28 Jan 2008 22:00:01 +0000 (09:00 +1100)]
Merge git://git./linux/kernel/git/wim/linux-2.6-watchdog
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
[WATCHDOG] constify function pointer tables
[WATCHDOG] TXx9 watchdog driver
[WATCHDOG] misc_register patch
[WATCHDOG] wdt: fix locking
Linus Torvalds [Mon, 28 Jan 2008 21:52:50 +0000 (08:52 +1100)]
Merge git://git./linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (197 commits)
sh: add spi header and r2d platform data V3
sh: update r7780rp interrupt code
sh: remove consistent alloc stuff from the machine vector
sh: use declared coherent memory for dreamcast pci ethernet adapter
sh: declared coherent memory support V2
sh: Add support for SDK7780 board.
sh: constify function pointer tables
sh: Kill off -traditional for linker script.
cdrom: Add support for Sega Dreamcast GD-ROM.
sh: Kill off hs7751rvoip reference from arch/sh/Kconfig.
sh: Drop r7780rp_defconfig, use r7780mp_defconfig as kbuild default.
sh: Kill off dead HS771RVoIP board support.
sh: r7785rp: Fix up DECLARE_INTC_DESC() arg mismatch.
sh: r7785rp: Hook up the rest of the HL7785 FPGA IRQ vectors.
sh: r2d - enable sm501 usb host function
sh: remove voyagergx
sh: r2d - add lcd planel timings to sm501 platform data
sh: Add OHCI and UDC platform devices for SH7720.
sh: intc - remove default interrupt priority tables
sh: Correct pte size mismatch for X2 TLB.
...
Linus Torvalds [Mon, 28 Jan 2008 21:52:20 +0000 (08:52 +1100)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (24 commits)
HID: ADS/Tech Radio si470x needs blacklist entry
HID: Logitech Extreme 3D needs NOGET quirk
HID: Refactor MS Presenter 8K key mapping
HID: MS Presenter mapping for PID 0x0701
HID: Support Samsung IR remote
HID: fix compilation of hidbp drivers without usbhid
HID: Blacklist the Gretag-Macbeth Huey display colorimeter
HID: the `bit' in hidinput_mapping_quirks() is an out parameter
HID: remove redundant WARN_ON()s in order not to scare users
HID: force hiddev creation for SONY PS3 controller
HID: Use hid blacklist in usbmouse/usbkbd
HID: proper handling of MS 4k and 6k devices
HID: remove unused variable in quirk event handler
HID: hid-input quirk for BTC 8193
HID: separate hid-input event quirks from generic code
HID: refactor mapping to input subsystem for quirky devices
HID: Microsoft Wireless Optical Desktop 3.0 quirk
HID: Add support for Logitech Elite keyboards
HID: add full support for Genius KB-29E
HID: fix a potential bug in pointer casting
...
Linus Torvalds [Mon, 28 Jan 2008 21:51:56 +0000 (08:51 +1100)]
Merge branch 'for-2.6.25' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.25' of git://git.kernel.dk/linux-2.6-block:
block: implement drain buffers
__bio_clone: don't calculate hw/phys segment counts
block: allow queue dma_alignment of zero
blktrace: Add blktrace ioctls to SCSI generic devices
Linus Torvalds [Mon, 28 Jan 2008 21:51:32 +0000 (08:51 +1100)]
Merge branch 'blk-end-request' of git://git.kernel.dk/linux-2.6-block
* 'blk-end-request' of git://git.kernel.dk/linux-2.6-block: (30 commits)
blk_end_request: changing xsysace (take 4)
blk_end_request: changing ub (take 4)
blk_end_request: cleanup of request completion (take 4)
blk_end_request: cleanup 'uptodate' related code (take 4)
blk_end_request: remove/unexport end_that_request_* (take 4)
blk_end_request: changing scsi (take 4)
blk_end_request: add bidi completion interface (take 4)
blk_end_request: changing ide-cd (take 4)
blk_end_request: add callback feature (take 4)
blk_end_request: changing ide normal caller (take 4)
blk_end_request: changing cpqarray (take 4)
blk_end_request: changing cciss (take 4)
blk_end_request: changing ide-scsi (take 4)
blk_end_request: changing s390 (take 4)
blk_end_request: changing mmc (take 4)
blk_end_request: changing i2o_block (take 4)
blk_end_request: changing viocd (take 4)
blk_end_request: changing xen-blkfront (take 4)
blk_end_request: changing viodasd (take 4)
blk_end_request: changing sx8 (take 4)
...
Linus Torvalds [Mon, 28 Jan 2008 21:51:05 +0000 (08:51 +1100)]
Merge branch 'sg' of git://git.kernel.dk/linux-2.6-block
* 'sg' of git://git.kernel.dk/linux-2.6-block:
SG: work with the SCSI fixed maximum allocations.
SG: Convert SCSI to use scatterlist helpers for sg chaining
SG: Move functions to lib/scatterlist.c and add sg chaining allocator helpers
Linus Torvalds [Mon, 28 Jan 2008 21:50:42 +0000 (08:50 +1100)]
Merge branch 'cfq-ioc-share' of git://git.kernel.dk/linux-2.6-block
* 'cfq-ioc-share' of git://git.kernel.dk/linux-2.6-block:
cfq-iosched: kill some big inlines
cfq-iosched: relax IOPRIO_CLASS_IDLE restrictions
kernel: add CLONE_IO to specifically request sharing of IO contexts
io_context sharing - anticipatory changes
block: cfq: make the io contect sharing lockless
io_context sharing - cfq changes
io context sharing: preliminary support
ioprio: move io priority from task_struct to io_context
Linus Torvalds [Mon, 28 Jan 2008 21:49:49 +0000 (08:49 +1100)]
Merge branch 'for-linus' of /home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (176 commits)
[ARM] 4795/1: S3C244X: Add armclk and setparent call
[ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock code
[ARM] 4793/1: S3C24XX: Add IRQ->GPIO pin mapping function
[ARM] 4792/1: S3C24XX: Remove warnings from debug-macro.S
[ARM] 4791/1: S3C2412: Make fclk a parent of msysclk
[ARM] 4790/1: S3C2412: Fix parent selection for msysclk.
[ARM] 4789/1: S3C2412: Add missing CLKDIVN register values
[ARM] 4788/1: S3C24XX: Fix paramet to s3c2410_dma_ctrl if S3C2410_DMAF_AUTOSTART used.
[ARM] 4787/1: S3C24XX: s3c2410_dma_request() should return the allocated channel number
[ARM] 4786/1: S3C2412: Add SPI FIFO controll constants
[ARM] 4785/1: S3C24XX: Add _SHIFT definitions for S3C2410_BANKCON registers
[ARM] 4784/1: S3C24XX: Fix GPIO restore glitches
[ARM] 4783/1: S3C24XX: Add s3c2410_gpio_getpull()
[ARM] 4782/1: S3C24XX: Define FIQ_START for any FIQ users
[ARM] 4781/1: S3C24XX: DMA suspend and resume support
[ARM] 4780/1: S3C2412: Allow for seperate DMA channels for TX and RX
[ARM] 4779/1: S3C2412: Add s3c2412_gpio_set_sleepcfg() call
[ARM] 4778/1: S3C2412: Add armclk and init from DVS state
[ARM] 4777/1: S3C24XX: Ensure clk_set_rate() checks the set_rate method for the clk
[ARM] 4775/1: s3c2410: fix compilation error if only s3c2442 cpu is selected
...
Linus Nilsson [Mon, 28 Jan 2008 14:56:27 +0000 (15:56 +0100)]
libata: Change "write_data" to "rw" for some function documentations
The documentation for ata_data_xfer and ata_data_xfer_noirq had the 'rw'
parameter named 'write_data'.
Signed-off-by: Linus Nilsson <lajnold@acc.umu.se>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tobias Lorenz [Sun, 27 Jan 2008 21:19:22 +0000 (22:19 +0100)]
HID: ADS/Tech Radio si470x needs blacklist entry
This patch adds blacklist entries in hid-quirks.c to let the usbhid driver
ignore the si470x radio devices. They are now handled by the new radio-si470x
driver.
Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jiri Kosina [Thu, 17 Jan 2008 14:23:11 +0000 (15:23 +0100)]
HID: Logitech Extreme 3D needs NOGET quirk
Logitech Extreme 3D needs NOGET quirk, otherwise it times out at
the time of connect.
Reported-by: Mike Sharov <msharov@softhome.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jan Kiszka [Mon, 14 Jan 2008 12:08:27 +0000 (13:08 +0100)]
HID: Refactor MS Presenter 8K key mapping
Following the suggestion of Jonas, this patch maps the special keys of
the MS Presenter 8000 to targets that should allow for better re-mapping
according to individual use cases (i.e. I avoided hard-wiring to
standard keys). This time I also included the last missing key event
(switching back from presentation mode).
The optimal Xmodmap customization for using the Presenter with
OpenOffice now looks like this for me:
keycode 175 = Escape
keycode 179 = F5
keysym XF86Forward = Right
keysym XF86Back = Left
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jiri Kosina [Thu, 10 Jan 2008 16:40:18 +0000 (17:40 +0100)]
HID: MS Presenter mapping for PID 0x0701
0x045e/0x0701 also needs the hid-input mapping quirk established by
quirk_microsoft_presenter_8k().
Reported-by: Jonas Delrue <jonas_delrue@hotmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Robert Schedel [Tue, 25 Dec 2007 23:57:40 +0000 (00:57 +0100)]
HID: Support Samsung IR remote
Samsung USB remotes (0419:0001) are rejected by kernel 2.6.23, because the
report descriptor from the remote contains a 48 bit HID report field. HID 1.11
states: Fields may span at most 4 bytes.
This patch, based on 2.6.23, fixes this by modifying the internal report
descriptor in hid-quirks.c. Additional user space support (e.g. LIRC) is
required to fetch the information from the hiddev interface.
The burden to reconstruct the data is moved into userspace (lirc through hiddev).
There is no need to set HID_QUIRK_HIDDEV quirk, as the device has also output
applications, which trigger the creation of hiddev device automatically.
Signed-off-by: Robert Schedel <r.schedel@yahoo.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jiri Kosina [Mon, 17 Dec 2007 15:11:27 +0000 (16:11 +0100)]
HID: fix compilation of hidbp drivers without usbhid
We can use the blacklist only if usbhid code is compiled.
Reported-by: jurriaan <thunder7@xs4all.nl>
Cc: Pascal Terjan <pterjan@mandriva.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Nicolas Mailhot [Sun, 16 Dec 2007 17:16:43 +0000 (18:16 +0100)]
HID: Blacklist the Gretag-Macbeth Huey display colorimeter
The Gretag-Macbeth Huey display colorimeter claims to be an HID device but
isn't. As a result the linux HID device will claim it, preventing FLOSS
software like Argyll CMS from talking to it.
Tested-by: Frederic Crozat <fcrozat@mandriva.com>
Signed-off-by: Nicolas Mailhot <nicolas.mailhot@laposte.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fengguang Wu [Fri, 7 Dec 2007 08:35:14 +0000 (16:35 +0800)]
HID: the `bit' in hidinput_mapping_quirks() is an out parameter
Fix a panic, by changing
hidinput_mapping_quirks(,, unsigned long *bit,)
to
hidinput_mapping_quirks(,, unsigned long **bit,)
The `bit' in this function is an out parameter.
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jiri Kosina [Fri, 30 Nov 2007 10:12:58 +0000 (11:12 +0100)]
HID: remove redundant WARN_ON()s in order not to scare users
The WARN_ON() in implement() and extract() spit out stacktraces and
a lot of other information that might make users think that there is
something seriously wrong with the system. WARN_ON() should not be
deliberately triggerable by userspace application, which these can be.
Usually this WARN_ON() triggers when hid2hci utility is sending the
data that don't correspond to the device's report descriptor.
Convert these messages to more friendly printk().
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Bastien Nocera [Wed, 28 Nov 2007 15:34:53 +0000 (16:34 +0100)]
HID: force hiddev creation for SONY PS3 controller
The device is not discoverable, and needs to be poked to set its master, the
Bluetooth device it will try to connect to when the "Home" button is pressed
without a cable plugged in.
Using libusb means disconnecting the device from its driver to get the report
descriptor. Using hiddev, we can poke it without relinquishing control over it,
so when you plug it in, it would still work as a pad.
This could be then used by sixpair program, after it is rewritten to use
hiddev instead of libusb.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pascal Terjan [Mon, 26 Nov 2007 13:03:52 +0000 (14:03 +0100)]
HID: Use hid blacklist in usbmouse/usbkbd
This fixes wacom tablets not working if usbmouse is loaded.
Signed-off-by: Pascal Terjan <pterjan@mandriva.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jiri Kosina [Mon, 26 Nov 2007 12:26:33 +0000 (13:26 +0100)]
HID: proper handling of MS 4k and 6k devices
This removes ugly macros IS_* to distinguish devices that
need special handling in hid-input, and establish proper
quirks for them.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jiri Kosina [Mon, 26 Nov 2007 10:32:51 +0000 (11:32 +0100)]
HID: remove unused variable in quirk event handler
Remove unused variable in quirk event handler.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jiri Kosina [Mon, 26 Nov 2007 12:18:00 +0000 (13:18 +0100)]
HID: hid-input quirk for BTC 8193
BTC 8193 keyboard handles its scrollwheel in very non-standard way.
It produces two non-standard usages for scrolling up and down, in
both cases with postive value equaling to 1. We handle this by temporary
mapping, which we then catch in quirk event handler, and remap to
negative HWHEEL even in order to introduce correct behavior.
Also the button requires special mapping, as it triggers standard-violating
usage code.
Reported in kernel.org bugzilla #9385
Reported-by: Kir Kolyshkin <kir@sacred.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jiri Kosina [Fri, 23 Nov 2007 12:16:02 +0000 (13:16 +0100)]
HID: separate hid-input event quirks from generic code
This patch separates also the hid-input quirks that have to be
applied at the time the event occurs, so that the generic code
handling HUT-compliant devices is not messed up by them too much.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jiri Kosina [Thu, 22 Nov 2007 14:18:18 +0000 (15:18 +0100)]
HID: refactor mapping to input subsystem for quirky devices
Currently, the handling of mapping between hid and input for devices
that don't conform to HUT 1.12 specification is very messy -- no per-device
handling, no blacklists, conditions on idVendor and idProduct placed
all over the code.
This patch moves all the device-specific input mapping to a separate
file, and introduces a blacklist-style handling for non-standard
device-specific mappings.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Drew Fisher [Sun, 18 Nov 2007 11:29:56 +0000 (12:29 +0100)]
HID: Microsoft Wireless Optical Desktop 3.0 quirk
Make the Microsoft Wireless Optical Desktop 3.0 work as a mouse.
Microsoft Wireless Optical Desktop 3.0 doesn't properly describe its interface
class. Specifically, since it doesn't mark the second interface as a mouse
(bInterfaceSubclass = 0), it doesn't get HID_QUIRK_NOGET applied to the
interface, and then acts broken when polled.
Signed-off-by: Drew Fisher <drew.m.fisher@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Carlos Corbacho [Sat, 17 Nov 2007 00:30:25 +0000 (01:30 +0100)]
HID: Add support for Logitech Elite keyboards
Reuse the quirks from the Cordless Desktop LX500 - stops some of the extra
keys being reported as mouse buttons.
Signed-off-by: Carlos Corbacho <cathectic@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jiri Kosina [Wed, 14 Nov 2007 11:13:26 +0000 (12:13 +0100)]
HID: add full support for Genius KB-29E
Genius KB-29E has broken report descriptor, which causes some of the
Consumer usages to appear incorrectly as Button usages. We fix it by
fixing the report descriptor before it is being parsed.
Also a few of the keys violate the HUT standard, so they need a special
handling. They currently fall into "Reserved" range as per HUT 1.12.
Reported-by: Szekeres Istvan <szekeres@iii.hu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Li Zefan [Wed, 14 Nov 2007 10:31:05 +0000 (11:31 +0100)]
HID: fix a potential bug in pointer casting
Don't directly cast list_head * to foo *, this works only when list
is the first member of struct foo, and we should not make the assumption
how members are ordered in the structure.
i.e. struct *f = (struct *f)pos will work if:
struct foo {
struct list_head list;
int i;
};
but will fail if:
struct foo {
int i;
struct list_head list;
}
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pavel Troller [Mon, 29 Oct 2007 10:13:46 +0000 (11:13 +0100)]
HID: Implement horizontal wheel handling for A4 Tech X5-005D
This mouse distinguishes horizontal wheel from vertical by a special "pseudo
event" GenericDesktop.00b8, with values of 0 for vertical and 8 for horizontal
wheel. Because this event is supplied by the parser too late, we need to delay
a wheel event, wait for this one and send either REL_WHEEL or REL_HWHEEL to
input depending on the event value.
Signed-off-by: Pavel Troller <patrol@sinus.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Michel Daenzer [Wed, 24 Oct 2007 14:30:37 +0000 (16:30 +0200)]
HID: Add support for Apple aluminum USB keyboards.
Reuse the existing quirks for Apple laptop USB keyboards.
Signed-off-by: Michel Daenzer <michel@tungstengraphics.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Michel Daenzer [Wed, 24 Oct 2007 14:30:34 +0000 (16:30 +0200)]
HID: Rename some code identifiers from PowerBook specific to Apple generic
Preserve identifiers exposed in build and run time configuration though in
order not to break existing configurations.
This is in preparation for adding support for Apple aluminum USB keyboards.
Signed-off-by: Michel Daenzer <michel@tungstengraphics.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jan Kiszka [Wed, 24 Oct 2007 14:24:22 +0000 (16:24 +0200)]
HID: Map MS Presenter 8000 bottom-side buttons
The MS Presenter 8000 bluetooth mouse is a "dual-use" device: If you
press a button on the top, you can turn it around and find special keys
on the other side, useful for presentations. This patch maps those three
bottom-keys that are not already detected to the intended functions. The
magic bottom on the top is mapped to F5 when we switch from mouse to
presenter mode in order to activate the presentation mode in the related
software (e.g. OpenOffice).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Russell King [Mon, 28 Jan 2008 13:21:38 +0000 (13:21 +0000)]
Merge branch 'pxa-plat' into devel
* pxa-plat: (53 commits)
[ARM] 4762/1: Basic support for Toradex Colibri module
[ARM] pxa: fix mci_init functions returning -1
[ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix
[ARM] 4747/1: pcm027: support for pcm990 baseboard for phyCORE-PXA270
[ARM] 4746/1: pcm027: network support for phyCORE-PXA270
[ARM] 4745/1: pcm027: default configuration
[ARM] 4744/1: pcm027: add support for phyCORE-PXA270 CPU module
[NET] smc91x: Make smc91x use IRQ resource trigger flags
[ARM] pxa: add default config for littleton
[ARM] pxa: add basic support for Littleton (PXA3xx Form Factor Platform)
[ARM] 4664/1: Add basic support for HTC Magician PDA phones
[ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs.
[ARM] pxa: skip registers saving/restoring if entering standby mode
[ARM] pxa: fix PXA27x resume
[ARM] pxa: Avoid fiddling with CKEN register on suspend
[ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme
[ARM] pxa: Add zylonite MFP wakeup configurations
[ARM] pxa: program MFPs for low power mode when suspending
[ARM] pxa: make MFP configuration processor independent
[ARM] pxa: remove un-used pxa3xx_mfp_set_xxx() functions
...
Conflicts:
arch/arm/mach-pxa/ssp.c
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Mon, 28 Jan 2008 13:21:30 +0000 (13:21 +0000)]
Merge branch 'orion' into devel
* orion: (26 commits)
[ARM] Orion: implement power-off method for QNAP TS-109/209
[ARM] Orion: add support for QNAP TS-109/TS-209
[ARM] Orion: I2C support
[I2C] i2c-mv64xxx: Don't set i2c_adapter.retries
[I2C] Split mv643xx I2C platform support
[ARM] Orion: enable CONFIG_RTC_DRV_M41T80 for D-Link DNS-323
[ARM] Orion defconfig
[ARM] Orion: add support for Orion/MV88F5181 based D-Link DNS-323
[ARM] Orion: MV88F5181 support bits
[ARM] Orion: Buffalo/Revogear Kurobox Pro support
[ARM] OrionNAS RD board support
[ARM] Orion: support for Marvell Orion-2 (
88F5281) Development Board
[ARM] Orion: common platform setup for Gigabit Ethernet port
[ARM] Orion: platform device registration for UART, USB and NAND
[ARM] Orion: system timer support
[ARM] Orion edge GPIO IRQ support
[ARM] Orion: IRQ support
[ARM] Orion: provide GPIO method for enabling hardware assisted blinking
[ARM] Orion: GPIO support
[ARM] Orion: programable address map support
...
Conflicts:
arch/arm/Kconfig
arch/arm/Makefile
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Mon, 28 Jan 2008 13:21:21 +0000 (13:21 +0000)]
Merge branches 'at91', 'ep93xx', 'iop', 'kprobes', 'ks8695', 'misc', 'msm', 's3c2410', 'sa1100' and 'vfp' into devel
* at91: (24 commits)
[ARM] 4615/4: sam926[13]ek buttons updated
[ARM] 4765/1: [AT91] AT91CAP9A-DK board support
[ARM] 4764/1: [AT91] AT91CAP9 core support
[ARM] 4738/1: at91sam9261: Remove udc pullup enabling in board initialisation
[ARM] 4761/1: [AT91] Board-support for NEW_LEDs
[ARM] 4760/1: [AT91] SPI CS0 errata on AT91RM9200
[ARM] 4759/1: [AT91] Buttons on CSB300
[ARM] 4758/1: [AT91] LEDs
[ARM] 4757/1: [AT91] UART initialization
[ARM] 4756/1: [AT91] Makefile cleanup
[ARM] 4755/1: [AT91] NAND update
[ARM] 4754/1: [AT91] SSC library support
[ARM] 4753/1: [AT91] Use DMA_BIT_MASK
[ARM] 4752/1: [AT91] RTT, RTC and WDT peripherals on SAM9
[ARM] 4751/1: [AT91] ISI peripheral on SAM9263
[ARM] 4750/1: [AT91] STN LCD displays on SAM9261
[ARM] 4734/1: at91sam9263ek: include IRQ for Ethernet PHY
[ARM] 4646/1: AT91: configurable HZ, default to 128
[ARM] 4688/1: at91: speed-up irq processing
[ARM] 4657/1: AT91: Header definition update
...
* ep93xx:
[ARM] 4671/1: ep93xx: remove obsolete gpio_line_* operations
[ARM] 4670/1: ep93xx: implement IRQT_BOTHEDGE gpio irq sense type
[ARM] 4669/1: ep93xx: simplify GPIO code and cleanups
[ARM] 4668/1: ep93xx: implement new GPIO API
* iop:
[ARM] 4770/1: GLAN Tank: correct physmap_flash_data width field
[ARM] 4732/1: GLAN Tank: register rtc-rs5c372 i2c device
[ARM] 4708/1: iop: update defconfigs for 2.6.24
* kprobes:
ARM kprobes: let's enable it
ARM kprobes: special hook for the kprobes breakpoint handler
ARM kprobes: prevent some functions involved with kprobes from being probed
ARM kprobes: don't let a single-stepped stmdb corrupt the exception stack
ARM kprobes: add the kprobes hook to the page fault handler
ARM kprobes: core code
ARM kprobes: instruction single-stepping support
* ks8695:
[ARM] 4603/1: KS8695: debugfs interface to view pin state
[ARM] 4601/1: KS8695: PCI support
* misc:
[ARM] remove duplicate includes
[ARM] CONFIG_DEBUG_STACK_USAGE
[ARM] 4689/1: small comment wrap fix
[ARM] 4687/1: Trivial arch/arm/kernel/entry-common.S comment fix
[ARM] 4666/1: ixp4xx: fix sparse warnings in include/asm-arm/arch-ixp4xx/io.h
[ARM] remove reference to non-existent MTD_OBSOLETE_CHIPS
[SERIAL] 21285: Report baud rate back via termios
[ARM] Remove pointless casts from void pointers,
[ARM] Misc minor interrupt handler cleanups
[ARM] Remove at91_lcdc.h
[ARM] ARRAY_SIZE() cleanup
[ARM] Update mach-types
* msm:
[ARM] msm: dma support for MSM7X00A
[ARM] msm: board file for MACH_HALIBUT (QCT MSM7200A)
[ARM] msm: irq and timer support for ARCH_MSM7X00A
[ARM] msm: core platform support for ARCH_MSM7X00A
* s3c2410: (33 commits)
[ARM] 4795/1: S3C244X: Add armclk and setparent call
[ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock code
[ARM] 4793/1: S3C24XX: Add IRQ->GPIO pin mapping function
[ARM] 4792/1: S3C24XX: Remove warnings from debug-macro.S
[ARM] 4791/1: S3C2412: Make fclk a parent of msysclk
[ARM] 4790/1: S3C2412: Fix parent selection for msysclk.
[ARM] 4789/1: S3C2412: Add missing CLKDIVN register values
[ARM] 4788/1: S3C24XX: Fix paramet to s3c2410_dma_ctrl if S3C2410_DMAF_AUTOSTART used.
[ARM] 4787/1: S3C24XX: s3c2410_dma_request() should return the allocated channel number
[ARM] 4786/1: S3C2412: Add SPI FIFO controll constants
[ARM] 4785/1: S3C24XX: Add _SHIFT definitions for S3C2410_BANKCON registers
[ARM] 4784/1: S3C24XX: Fix GPIO restore glitches
[ARM] 4783/1: S3C24XX: Add s3c2410_gpio_getpull()
[ARM] 4782/1: S3C24XX: Define FIQ_START for any FIQ users
[ARM] 4781/1: S3C24XX: DMA suspend and resume support
[ARM] 4780/1: S3C2412: Allow for seperate DMA channels for TX and RX
[ARM] 4779/1: S3C2412: Add s3c2412_gpio_set_sleepcfg() call
[ARM] 4778/1: S3C2412: Add armclk and init from DVS state
[ARM] 4777/1: S3C24XX: Ensure clk_set_rate() checks the set_rate method for the clk
[ARM] 4775/1: s3c2410: fix compilation error if only s3c2442 cpu is selected
...
* sa1100:
[ARM] sa1100: add clock source support
* vfp:
[ARM] 4584/2: ARMv7: Add Advanced SIMD (NEON) extension support
[ARM] 4583/1: ARMv7: Add VFPv3 support
[ARM] 4582/2: Add support for the common VFP subarchitecture
Ben Dooks [Mon, 28 Jan 2008 12:01:35 +0000 (13:01 +0100)]
[ARM] 4795/1: S3C244X: Add armclk and setparent call
Add armclk to the supported clocks on the S3C2440 and S3C2442 to
better represent the DVS state which controls whether FCLK or HCLK
is fed to the ARM core.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ben Dooks [Mon, 28 Jan 2008 12:01:34 +0000 (13:01 +0100)]
[ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock code
Merge together the bits of the S3C2440 and S3C2442 clock code
that can be.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ben Dooks [Mon, 28 Jan 2008 12:01:33 +0000 (13:01 +0100)]
[ARM] 4793/1: S3C24XX: Add IRQ->GPIO pin mapping function
Add the reverse of s3c2410_gpio_getirq to convert
a IRQ number into a GPIO pin number.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ben Dooks [Mon, 28 Jan 2008 12:01:32 +0000 (13:01 +0100)]
[ARM] 4792/1: S3C24XX: Remove warnings from debug-macro.S
Remove warnings left in include/asm-arm/arch-s3c2410/debug-macro.S
whilst these where being experimented with.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ben Dooks [Mon, 28 Jan 2008 12:01:31 +0000 (13:01 +0100)]
[ARM] 4791/1: S3C2412: Make fclk a parent of msysclk
In the S3C2412 fclk is derived from msysclk, not straight from
the MPLL output. Set clk_f.parent appropriately.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ben Dooks [Mon, 28 Jan 2008 12:01:30 +0000 (13:01 +0100)]
[ARM] 4790/1: S3C2412: Fix parent selection for msysclk.
The msysclk clock was checking for the wrong PLL for the
parent in s3c2412_setparent_msysclk(), trying the UPLL instead
of the MPLL output.
Also ensure the mpll and fclks are at the same rate at init time.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ben Dooks [Mon, 28 Jan 2008 12:01:29 +0000 (13:01 +0100)]
[ARM] 4789/1: S3C2412: Add missing CLKDIVN register values
Add S3C2412_CLKDIVN_DVSEN and S3C2412_CLKDIVN_HALFHCLK definitions to
the S3C2412_CLKDIVN set.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ben Dooks [Mon, 28 Jan 2008 12:01:28 +0000 (13:01 +0100)]
[ARM] 4788/1: S3C24XX: Fix paramet to s3c2410_dma_ctrl if S3C2410_DMAF_AUTOSTART used.
Fix the channel parameter to s3c2410_dma_ctrl() in s3c2410_dma_enqueue()
if the S3C2410_DMAF_AUTOSTART is set on the channel.
Spotted by Steven Ryu at Samsung.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ben Dooks [Mon, 28 Jan 2008 12:01:27 +0000 (13:01 +0100)]
[ARM] 4787/1: S3C24XX: s3c2410_dma_request() should return the allocated channel number
The s3c2410_dma_request() function should return the channel allocated
instead of zero for success.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ben Dooks [Mon, 28 Jan 2008 12:01:26 +0000 (13:01 +0100)]
[ARM] 4786/1: S3C2412: Add SPI FIFO controll constants
Add control constants for the S3C2412 SPI unit FIFO.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ben Dooks [Mon, 28 Jan 2008 12:01:25 +0000 (13:01 +0100)]
[ARM] 4785/1: S3C24XX: Add _SHIFT definitions for S3C2410_BANKCON registers
Add definitions to allow easier decomposotion of the contents of
the S3C2410_BANKON registers
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ben Dooks [Mon, 28 Jan 2008 12:01:24 +0000 (13:01 +0100)]
[ARM] 4784/1: S3C24XX: Fix GPIO restore glitches
The core resume code may have caused glitches in the GPIO when
restoring the GPIO state due to the order in which the GPIO registers
were being written.
Change the restore process take into account the state of the
GPIOs on resume and the state the system wants to restore them to.
See the code comments in the patch for more details of the process.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ben Dooks [Mon, 28 Jan 2008 12:01:23 +0000 (13:01 +0100)]
[ARM] 4783/1: S3C24XX: Add s3c2410_gpio_getpull()
Add the call s3c2410_gpio_getpull() to return the
current state of the pin's pull-up.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ben Dooks [Mon, 28 Jan 2008 12:01:22 +0000 (13:01 +0100)]
[ARM] 4782/1: S3C24XX: Define FIQ_START for any FIQ users
Ensure FIQ_START is defined to allow anyone to use FIQ code on
an S3C24XX based CPU.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ben Dooks [Mon, 28 Jan 2008 12:01:21 +0000 (13:01 +0100)]
[ARM] 4781/1: S3C24XX: DMA suspend and resume support
If an DMA channel was active at suspend, then ensure that
it is correctly reconfigured when the system resumes.
Note, the previous policy was for each driver to handle their
own reconfiguration on resume. The policy has been changed to
make the individual driver's job easier.
Signed-off-by: Ben Dooks <ben-linux@flfuf.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ben Dooks [Mon, 28 Jan 2008 12:01:20 +0000 (13:01 +0100)]
[ARM] 4780/1: S3C2412: Allow for seperate DMA channels for TX and RX
The current S3C24XX DMA code does not allow for an peripheral
that has one channel for RX and another for TX.
This patch adds a per-cpu dma operation to select the transmit
or receive channel, and adds support to the S3C2412 for the
seperate DMA channels for TX and RX.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ben Dooks [Mon, 28 Jan 2008 12:01:19 +0000 (13:01 +0100)]
[ARM] 4779/1: S3C2412: Add s3c2412_gpio_set_sleepcfg() call
Add s3c2412_gpio_set_sleepcfg() to allow the setting of the sleep
configuration of the GPIO blocks.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ben Dooks [Mon, 28 Jan 2008 12:01:18 +0000 (13:01 +0100)]
[ARM] 4778/1: S3C2412: Add armclk and init from DVS state
Add armclk to the S3C2412 to indicate the current clock connected to
the ARM core.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ben Dooks [Mon, 28 Jan 2008 12:01:17 +0000 (13:01 +0100)]
[ARM] 4777/1: S3C24XX: Ensure clk_set_rate() checks the set_rate method for the clk
Add checks for clk_set_rate() and ensure that we do not allow set_rate
to be called for a clock that does not have it defined. Add default
methods for fclk, hclk, pclk and mpll.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Krzysztof Helt [Sun, 27 Jan 2008 18:01:18 +0000 (19:01 +0100)]
[ARM] 4775/1: s3c2410: fix compilation error if only s3c2442 cpu is selected
This patch fixes compilation error if only a machine with
s3c2442 cpu is selected but without s3c2440 cpu selected.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>