OSDN Git Service
Thomas Huth [Fri, 24 Jan 2014 15:39:54 +0000 (16:39 +0100)]
s390x/kvm: Rework SIGP INITIAL CPU RESET handler
The s390_cpu_initial_reset() function had two deficiencies: First, it
used an ioctl for the destination CPU, and this ioctl could block
nearly forever, as long as the destination CPU was running in the SIE
loop. Second, it also cleared the general purpose registers - something
it should not do according to the Principles of Operations.
Since we've already got another function for the initial CPU reset in
cpu.c, we can also use that function instead. And by using run_on_cpu()
for executing this code, we make sure that the destination CPU is
correctly kicked out of kernel mode now.
Suggested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Thomas Huth [Wed, 12 Feb 2014 08:56:35 +0000 (09:56 +0100)]
s390x/cpu: Use ioctl to reset state in the kernel
Some of the state in the kernel can not be reset from QEMU yet.
For this we've got to use the KVM_S390_INITIAL_RESET ioctl to make
sure that the state in the kernel is set to the right values during
initial CPU reset, too.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Christian Borntraeger [Thu, 13 Feb 2014 08:48:12 +0000 (09:48 +0100)]
s390-ccw.img: new binary rom to match latest fixes
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Christian Borntraeger [Tue, 11 Feb 2014 21:46:53 +0000 (22:46 +0100)]
s390-ccw.img: Fix sporadic errors with ccw boot image - initialize css
We have to set the cssid to 0, otherwise the stsch code will
return an operand exception without the m bit. In the same way
we should set m=0.
This case was triggered in some cases during reboot, if for some
reason the location of blk_schid.cssid contains 1 and m was 0.
Turns out that the qemu elf loader does not zero out the bss section
on reboot.
The symptom was an dump of the old kernel with several areas
overwritten. The bootloader does not register a program check
handler, so bios exception jumped back into the old kernel.
Lets just use a local struct with a designed initializer. That
will guarantee that all other subelements are initialized to 0.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Christian Borntraeger [Wed, 12 Feb 2014 15:17:35 +0000 (16:17 +0100)]
s390-ccw.img: Fix sporadic reboot hangs: Initialize next_idx
The current code does not initialize next_idx in the virtio ring.
As the ccw bios will always use guest memory at a fixed location,
this queue might != 0 after a reboot.
Lets make the initialization explicit.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Heinz Graalfs [Fri, 20 Dec 2013 11:02:17 +0000 (12:02 +0100)]
s390x/event-facility: exploit realize/unrealize
init/exit functionality of abstract SCLPEvent class is now exploiting
realize/unrealize.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Heinz Graalfs [Wed, 18 Dec 2013 12:59:57 +0000 (13:59 +0100)]
s390x/event-facility: add support for live migration
Add support for live migration using VMStateDescription.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Heinz Graalfs [Wed, 18 Dec 2013 09:10:49 +0000 (10:10 +0100)]
s390x/event-facility: code restructure
Code restructure in order to simplify class hierarchy
- remove S390SCLPDevice abstract base class
and move function pointers into new SCLPEventFacilityClass
- implement SCLPEventFacility as SysBusDevice
- use define constants for instance creation strings
The following ascii-art shows the class structure wrt the SCLP EventFacility
before (CURRENT) and after the restructure (NEW):
----
CURRENT:
"s390-sclp-events-bus"
+-------------------------+
| SCLPEventsBus |
|-------------------------|
|BusState qbus |
+-------------------------+
+-------------------------+
| SCLPEventFacility | - to be replaced by new SCLPEventFacility,
|-------------------------| which will be a SysBusDevice
|SCLPEventsBus sbus |
|DeviceState *qdev |
|unsigned int receive_mask|
+-------------------------+
+-------------------------+
| S390SCLPDeviceClass | - to be replaced by new SCLPEventFacilityClass
|-------------------------|
|DeviceClass qdev |
|*(init)() |
+-------------------------+
"s390-sclp-event-facility"
|
instance-of
|
V
"s390-sclp-device" - this is an abstract class
+-------------------------+
| S390SCLPDevice (A)| - to be replaced by new SCLPEventFacility
|-------------------------|
|SysBusDevice busdev |
|SCLPEventFacility *ef |
| |
|*(sclp_command_handler)()| - these 2 go to new SCLPEventFacilityClass
|*(event_pending)() |
+-------------------------+
----
NEW:
"s390-sclp-events-bus"
+-------------------------+
| SCLPEventsBus |
|-------------------------|
|BusState qbus |
+-------------------------+
+-------------------------+
| SCLPEventFacilityClass |
|-------------------------|
|DeviceClass parent_class |
| |
|*(init)() |
|*(command_handler)() |
|*(event_pending)() |
+-------------------------+
"s390-sclp-event-facility"
+-------------------------+
| SCLPEventFacility |
|-------------------------|
|SysBusDevice parent_class|
|SCLPEventsBus sbus |
|unsigned int receive_mask|
+-------------------------+
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Heinz Graalfs [Mon, 23 Dec 2013 09:25:38 +0000 (10:25 +0100)]
s390x/event-facility: some renaming
Do some renaming to shorten some identifiers and to emphasize sclp.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Thomas Huth [Tue, 14 Jan 2014 11:13:32 +0000 (12:13 +0100)]
s390x/sclp: Fixed setting of condition code register
In the SCLP handler function, the condition code register must
only be set if no exception occured.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Thomas Huth [Mon, 13 Jan 2014 11:55:55 +0000 (12:55 +0100)]
s390x/sclp: Add missing checks to SCLP handler
If the 51 most significant bits of the SCCB address are zero or equal to
the prefix, we should throw an specification exception, too.
Also moved the check for privileged mode to sclp_service_call() to have
all program checks in one place now.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Thomas Huth [Mon, 13 Jan 2014 11:19:03 +0000 (12:19 +0100)]
s390x/sclp: Fixed the size of sccb and code parameter
The pointer to the SCCB should not be limited to 32 bits only.
In contrast to this, the command word parameter is only 32 bits
(the upper 32 bits should be ignored).
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Christian Borntraeger [Fri, 7 Feb 2014 12:41:58 +0000 (13:41 +0100)]
s390x/eventfacility: mask out commands
As a followup to commit
5f04c14a10fa7f259bc0808f35a0beda49f7821e
(s390-sclp: Define New SCLP Codes) we should mask the sclp command
not only in base sclp, but also in the event facility.
Based on an initial patch from Ralf Hoppe.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Thomas Huth [Tue, 14 Jan 2014 12:32:23 +0000 (13:32 +0100)]
s390x/virtio-hcall: Specification exception for illegal subcodes
So far, the DIAG 500 hypervisor call was only setting -EINVAL in
R2 when a guest tried to call this function with an illegal subcode.
This patch now changes the behavior so that a specification exception
is thrown instead, since this is the common behavior of other DIAG
functions (and other CPU instructions) when being called with illegal
parameters.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Thomas Huth [Mon, 13 Jan 2014 08:26:49 +0000 (09:26 +0100)]
s390x/virtio-hcall: Add range check for hypervisor call
The handler for diag 500 did not check whether the requested function
was in the supported range, so illegal values could crash QEMU in the
worst case.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
CC: qemu-stable@nongnu.org
Thomas Huth [Wed, 22 Jan 2014 16:02:46 +0000 (17:02 +0100)]
s390x/kvm: Fixed bad SIGP SET-ARCHITECTURE handler
The SET-ARCHITECTURE handler in QEMU caused a program interruption.
This is wrong according to the "Principles of Operations" specification
(since SIGP should never cause a program interrupt) and was likely only
introduced for debugging purposes. Since we handle SET-ARCHITECTURE in
the kernel already and only dropped to user space in case of bad mode
parameters, we should just report INVALID PARAMETER in QEMU instead.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Dominik Dingel [Thu, 5 Sep 2013 11:54:39 +0000 (13:54 +0200)]
s390x/async_pf: Check for apf extension and enable pfault
S390 can also use async page faults, to enhance guest scheduling.
In case of live migration we want to disable the feature and let
all pending request finish.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Jens Freimann [Tue, 16 Jul 2013 07:04:04 +0000 (09:04 +0200)]
s390x/kvm: implement floating-interrupt controller device
This patch implements a floating-interrupt controller device (flic)
which interacts with the s390 flic kvm_device.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Christian Borntraeger [Fri, 7 Feb 2014 11:13:39 +0000 (12:13 +0100)]
update linux headers to kvm/next
This updates the kvm headers to
commit
d3714010c307d26df251c45be9cd12ab6d41f0c4
KVM: x86: emulator_cmpxchg_emulated should mark_page_dirty
in kvm/next.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Peter Crosthwaite [Wed, 26 Feb 2014 00:42:23 +0000 (16:42 -0800)]
xilinx: Delete hw/include/xilinx.h
This is now obsolete - remove the header and all its inclusions.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Crosthwaite [Wed, 26 Feb 2014 00:41:49 +0000 (16:41 -0800)]
xilinx: Inline usages of xilinx_axi*_init()
Inline the only usage of each of xilinx_axiethernet_init and
xilinx_axidma_init. Converts this init to at least a semi-recent QOM
styling.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Crosthwaite [Wed, 26 Feb 2014 00:41:14 +0000 (16:41 -0800)]
xilinx: Inline usage of xilinx_ethlite_create()
Inline the only usage. Converts this init to at least a semi-recent QOM
styling.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Crosthwaite [Wed, 26 Feb 2014 00:40:39 +0000 (16:40 -0800)]
xilinx: Inline usages of xilinx_timer_create()
Inline these usages. Converts these init to at least a semi-recent QOM
styling.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Crosthwaite [Wed, 26 Feb 2014 00:40:04 +0000 (16:40 -0800)]
xilinx: Inline usages of xilinx_intc_create()
Inline these usages. Converts these init to at least a semi-recent QOM
styling.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Crosthwaite [Wed, 26 Feb 2014 00:39:29 +0000 (16:39 -0800)]
microblaze/ml605: Define macros for irq/memory maps
Define (missing) macros for the interrupt and memory maps for the sake
of self documentation.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Crosthwaite [Wed, 26 Feb 2014 00:38:54 +0000 (16:38 -0800)]
ppc/virtex_ml507: Define macros for irq/memory maps
Define macros for the interrupt and memory maps for the sake of self
documentation.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Crosthwaite [Wed, 26 Feb 2014 00:38:19 +0000 (16:38 -0800)]
microblaze/s3adsp_1800: Define macros for irq map
Define macros for the interrupt map for the sake of self documentation.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Paolo Bonzini [Tue, 25 Feb 2014 16:36:55 +0000 (17:36 +0100)]
modules: do not include gmodule-2.0 in static builds
gmodule-2.0's pkg-config files include -Wl,--export-dynamic, which breaks
static builds. It is a glib bug, but we need to support --static builds for
the linux-user targets, and in the end all that is needed to fix this is:
* outlaw --enable-modules --static, which makes little sense anyway
* only include gmodule-2.0's cflags and ldflags if --enable-modules is
specified on the command line.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id:
1393346215-5636-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 25 Feb 2014 15:17:24 +0000 (15:17 +0000)]
Merge remote-tracking branch 'remotes/spice/tags/pull-spice-3' into staging
qxl: add sanity check
# gpg: Signature made Mon 24 Feb 2014 12:01:27 GMT using RSA key ID
D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/spice/tags/pull-spice-3:
qxl: add sanity check
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 25 Feb 2014 12:30:01 +0000 (12:30 +0000)]
Merge remote-tracking branch 'remotes/mdroth/qga-pull-2014-02-24' into staging
* remotes/mdroth/qga-pull-2014-02-24:
qemu-ga: isa-serial support on Windows
qga: Fix memory allocation pasto
qga: Don't require 'time' argument in guest-set-time command
qga: vss-win32: Fix interference with snapshot deletion by other VSS request
qga: vss-win32: Fix interference with snapshot creation by other VSS requesters
qga: vss-win32: Use NULL as an invalid pointer for OpenEvent and CreateEvent
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 25 Feb 2014 11:54:40 +0000 (11:54 +0000)]
Merge remote-tracking branch 'remotes/xtensa/tags/
20140224-xtensa' into staging
Xtensa fixes and improvements queue 2014-02-24:
- add support for ML605 and KC705 FPGA boards;
- flush opencores_eth queue when new RX descriptor is available;
- add basic checks to cache opcodes;
- make core configuration available to tests;
- implement HW config ID special registers.
# gpg: Signature made Mon 24 Feb 2014 00:52:42 GMT using RSA key ID
F83FA044
# gpg: Good signature from "Max Filippov <max.filippov@cogentembedded.com>"
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>"
* remotes/xtensa/tags/
20140224-xtensa:
target-xtensa: provide HW confg ID registers
target-xtensa: refactor standard core configuration
target-xtensa: add basic tests for cache opcodes
target-xtensa: allow using core configuration in tests
target-xtensa: add overridable test_init macro
target-xtensa: add basic checks to icache opcodes
target-xtensa: add basic checks to dcache opcodes
target-xtensa: add RRRI4 opcode format fields
opencores_eth: flush queue whenever can_receive can go from false to true
hw/xtensa: add support for ML605 and KC705 FPGA board
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 25 Feb 2014 10:50:11 +0000 (10:50 +0000)]
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches
# gpg: Signature made Fri 21 Feb 2014 21:42:24 GMT using RSA key ID
C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (54 commits)
iotests: Mixed quorum child device specifications
quorum: Simplify quorum_open()
quorum: Add unit test.
quorum: Add quorum_open() and quorum_close().
quorum: Implement recursive .bdrv_recurse_is_first_non_filter in quorum.
quorum: Add quorum_co_flush().
quorum: Add quorum_invalidate_cache().
quorum: Add quorum_getlength().
quorum: Add quorum mechanism.
quorum: Add quorum_aio_readv.
blkverify: Extract qemu_iovec_clone() and qemu_iovec_compare() from blkverify.
quorum: Add quorum_aio_writev and its dependencies.
quorum: Create BDRVQuorumState and BlkDriver and do init.
quorum: Create quorum.c, add QuorumChildRequest and QuorumAIOCB.
check-qdict: Test termination of qdict_array_split()
check-qdict: Adjust test for qdict_array_split()
qdict: Extract non-QDicts in qdict_array_split()
qemu-config: Sections must consist of keys
qemu-iotests: Check qemu-img command line parsing
qemu-img: Allow -o help with incomplete argument list
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 24 Feb 2014 16:12:55 +0000 (16:12 +0000)]
Merge remote-tracking branch 'remotes/sstabellini/xen-140220' into staging
* remotes/sstabellini/xen-140220:
xen_disk: fix io accounting
Call pci_piix3_xen_ide_unplug from unplug_disks
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 24 Feb 2014 15:37:59 +0000 (15:37 +0000)]
Merge remote-tracking branch 'remotes/bonzini/configure' into staging
* remotes/bonzini/configure:
build: softmmu targets do not have a "main.o" file
configure: Disable libtool if -fPIE does not work with it (bug #
1257099)
block: convert block drivers linked with libs to modules
Makefile: introduce common-obj-m and block-obj-m for DSO
Makefile: install modules with "make install"
module: implement module loading
rules.mak: introduce DSO rules
darwin: do not use -mdynamic-no-pic
block: use per-object cflags and libs
rules.mak: allow per object cflags and libs
rules.mak: fix $(obj) to a real relative path
util: Split out exec_dir from os_find_datadir
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 20 Feb 2014 15:10:16 +0000 (15:10 +0000)]
configure: check that C++ compiler actually works
Check that the C++ compiler works with the C compiler; if it
does not, then don't pass CXX to the build process. This
fixes a regression where QEMU was no longer building if the
build environment didn't have a C++ compiler (introduced
in commit
3144f78b, which incorrectly assumed that rules.mak
would only see a non-empty $(CXX) if configure had actually
found a working C++ compiler).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reported-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Tested-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id:
1392909016-14028-1-git-send-email-peter.maydell@linaro.org
Gerd Hoffmann [Wed, 19 Feb 2014 10:40:17 +0000 (11:40 +0100)]
qxl: add sanity check
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Max Filippov [Sat, 15 Feb 2014 16:49:09 +0000 (20:49 +0400)]
target-xtensa: provide HW confg ID registers
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Max Filippov [Sat, 15 Feb 2014 16:58:47 +0000 (20:58 +0400)]
target-xtensa: refactor standard core configuration
Coalesce all standard configuration sections into single
DEFAULT_SECTIONS macro for all cores. This allows to add new features in
a single place: overlay_tool.h
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Max Filippov [Tue, 11 Feb 2014 08:22:19 +0000 (12:22 +0400)]
target-xtensa: add basic tests for cache opcodes
Test that non-locking prefetch operations don't cause exceptions on
missing TLB and that other 'hit' cache operations do.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Max Filippov [Mon, 10 Feb 2014 16:20:52 +0000 (20:20 +0400)]
target-xtensa: allow using core configuration in tests
Add path to the core configuration directory to test build command and
replace .include asm directive with #include to enable preprocessing.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Max Filippov [Mon, 10 Feb 2014 08:26:45 +0000 (12:26 +0400)]
target-xtensa: add overridable test_init macro
Some test suites, like MMU, need per-test initialization. Don't make them
redefine test macro, add test_init for that purpose.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Max Filippov [Fri, 7 Feb 2014 11:57:22 +0000 (15:57 +0400)]
target-xtensa: add basic checks to icache opcodes
Check privilege level for privileged instructions (IHU, III, IIU and IPFL
are privileged), memory accessibility for instructions that reference memory
(IH* and IPFL) and windowed register validity for all instruction cache
instructions.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Max Filippov [Fri, 7 Feb 2014 11:57:22 +0000 (15:57 +0400)]
target-xtensa: add basic checks to dcache opcodes
Check privilege level for privileged instructions (DHI, DHU, DII, DIU, DIWB,
DIWBI, DPFL are privileged), memory accessibility for instructions that
reference memory (all DH* and DPFL) and windowed register validity for all
data cache instructions.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Max Filippov [Mon, 10 Feb 2014 05:16:33 +0000 (09:16 +0400)]
target-xtensa: add RRRI4 opcode format fields
This encoding is used by cache instructions.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Max Filippov [Mon, 3 Feb 2014 03:57:55 +0000 (07:57 +0400)]
opencores_eth: flush queue whenever can_receive can go from false to true
The following registers control whether MAC can receive frames:
- MODER.RXEN bit that enables/disables receiver;
- TX_BD_NUM register that specifies number of RX descriptors.
Notify QEMU networking core when the MAC is ready to receive frames.
Discard frame and raise BUSY interrupt when the frame arrives but the
current RX descriptor is not empty.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Max Filippov [Sat, 1 Feb 2014 22:44:41 +0000 (02:44 +0400)]
hw/xtensa: add support for ML605 and KC705 FPGA board
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Miki Mishael [Wed, 15 Jan 2014 09:33:44 +0000 (04:33 -0500)]
qemu-ga: isa-serial support on Windows
Add support for isa-serial method for qemu-ga on Windows,
Added -p command line parameter for serial port name
specification, e.g. "-p COM15".
Signed-off-by: Miki Mishael <mmishael@redhat.com>
Signed-off-by: Dmitry Fleytman <dfleytma@redhat.com>
*added default isa-serial path to help output
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Markus Armbruster [Fri, 21 Feb 2014 12:36:49 +0000 (13:36 +0100)]
qga: Fix memory allocation pasto
qmp_guest_file_seek() allocates memory for a GuestFileRead object
instead of the GuestFileSeek object it actually uses. Harmless,
because the GuestFileRead is slightly larger.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Michal Privoznik [Fri, 31 Jan 2014 10:29:51 +0000 (11:29 +0100)]
qga: Don't require 'time' argument in guest-set-time command
As the description to the guest-set-time states, the command is
there to ease time synchronization after resume. If guest was
suspended for longer period of time, its system time can go off
so badly, that even NTP refuses to set it. That's why the command
was invented: to give users chance to set the time (not
necessarily 100% correct). However, there's is no real need for
us to require users to pass an arbitrary time. Especially if we
can read the correct value from RTC (boiling down to reading
host's time). Hence this commit enables logic:
guest-set-time() == guest-set-time($now_from_rtc)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Tomoki Sekiyama [Mon, 13 Jan 2014 17:25:39 +0000 (12:25 -0500)]
qga: vss-win32: Fix interference with snapshot deletion by other VSS request
When a VSS requester such as vshadow.exe or diskshadow.exe requests to
delete snapshots, qemu-ga VSS provider's DeleteSnapshots() is also called
and returns E_NOTIMPL, that makes the deletion fail.
To avoid this issue, return S_OK and set values that represent no snapshots
are deleted by qemu-ga VSS provider.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Yan Vugenfirer <yvugenfi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Tomoki Sekiyama [Mon, 13 Jan 2014 17:25:29 +0000 (12:25 -0500)]
qga: vss-win32: Fix interference with snapshot creation by other VSS requesters
When a VSS requester such as vshadow.exe or diskshadow.exe requests to
create disk snapshots, Windows may choose qemu-ga VSS provider if it is
only provider registered on the system. However, because it provides only a
function to freeze the filesystem, the snapshotting fails.
This patch adds a check into CQGAVssProvider::IsVolumeSupported() to reject
the request from other VSS requesters, so that the other provider is chosen.
The check of requester is done by confirming event channels between
qemu-ga's requester and provider established. To ensure that the events are
initialized when CQGAVssProvider::IsVolumeSupported() is called, it moves
the initialization earlier.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Yan Vugenfirer <yvugenfi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Tomoki Sekiyama [Mon, 13 Jan 2014 17:25:23 +0000 (12:25 -0500)]
qga: vss-win32: Use NULL as an invalid pointer for OpenEvent and CreateEvent
OpenEvent and CreateEvent WinAPI return NULL when failed to open/create
events handles, instead of INVALID_HANDLE_VALUE (although their return
types are HANDLE).
This replaces INVALID_HANDLE_VALUE related to event handles with NULL.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Yan Vugenfirer <yvugenfi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Max Reitz [Fri, 21 Feb 2014 21:30:38 +0000 (22:30 +0100)]
iotests: Mixed quorum child device specifications
Add a test case to test 081 for mixing full option dicts and reference
strings of specifying the quorum child block devices through QMP.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Fri, 21 Feb 2014 21:30:37 +0000 (22:30 +0100)]
quorum: Simplify quorum_open()
Although it may not look like it, this patch simplifies quorum_open().
qdict_array_split() is now able to return QLists with different objects
than only QDicts, therefore it will now do all the work and
quorum_open() does not have to handle reference strings by itself.
This allows mixing full option dicts and reference strings for
specifying the child block devices of quorum; furthermore, it improves
handling of malformed specifications.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Benoît Canet [Fri, 21 Feb 2014 21:21:21 +0000 (22:21 +0100)]
quorum: Add unit test.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Benoît Canet [Fri, 21 Feb 2014 21:21:20 +0000 (22:21 +0100)]
quorum: Add quorum_open() and quorum_close().
Example of command line:
-drive if=virtio,driver=quorum,\
children.0.file.filename=1.raw,\
children.0.node-name=1.raw,\
children.0.driver=raw,\
children.1.file.filename=2.raw,\
children.1.node-name=2.raw,\
children.1.driver=raw,\
children.2.file.filename=3.raw,\
children.2.node-name=3.raw,\
children.2.driver=raw,\
vote-threshold=2
blkverify=on with vote-threshold=2 and two files can be passed to
emulate blkverify.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Benoît Canet [Fri, 21 Feb 2014 21:21:19 +0000 (22:21 +0100)]
quorum: Implement recursive .bdrv_recurse_is_first_non_filter in quorum.
This is used to activate quorum snapshot.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Benoît Canet [Fri, 21 Feb 2014 21:21:18 +0000 (22:21 +0100)]
quorum: Add quorum_co_flush().
Makes a vote to select error if any.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Benoît Canet [Fri, 21 Feb 2014 21:21:17 +0000 (22:21 +0100)]
quorum: Add quorum_invalidate_cache().
We really want that live migration works with quorum so implement
quorum_invalidate_cache().
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Benoît Canet [Fri, 21 Feb 2014 21:21:16 +0000 (22:21 +0100)]
quorum: Add quorum_getlength().
Check that every bs file returns the same length.
Otherwise, return -EIO to disable the quorum and
avoid length discrepancy.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Benoît Canet [Fri, 21 Feb 2014 21:21:15 +0000 (22:21 +0100)]
quorum: Add quorum mechanism.
This patchset enables the core of the quorum mechanism.
The num_children reads are compared to get the majority version and if this
version exists more than threshold times the guest won't see the error at all.
If a block is corrupted or if an error occurs during an IO or if the quorum
cannot be established QMP events are used to report to the management.
Use gnutls's SHA-256 to compare versions.
--enable-quorum must be used to enable the feature.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Benoît Canet [Fri, 21 Feb 2014 21:21:14 +0000 (22:21 +0100)]
quorum: Add quorum_aio_readv.
Add code to do num_children reads in parallel and cleanup the structures
afterwards.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Benoît Canet [Fri, 21 Feb 2014 21:21:13 +0000 (22:21 +0100)]
blkverify: Extract qemu_iovec_clone() and qemu_iovec_compare() from blkverify.
qemu_iovec_compare() will be used to compare IOs vectors in quorum blkverify
mode. The patch extracts these functions in order to factorize the code.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Benoît Canet [Fri, 21 Feb 2014 21:21:12 +0000 (22:21 +0100)]
quorum: Add quorum_aio_writev and its dependencies.
Writes are mirrored num_children times on num_children devices.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Benoît Canet [Fri, 21 Feb 2014 21:21:11 +0000 (22:21 +0100)]
quorum: Create BDRVQuorumState and BlkDriver and do init.
Create the structure holding the quorum settings and write the minimal block
driver instanciation boilerplate.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Benoît Canet [Fri, 21 Feb 2014 21:21:10 +0000 (22:21 +0100)]
quorum: Create quorum.c, add QuorumChildRequest and QuorumAIOCB.
Quorum is a block filter mirroring writes to num_children children.
For reads quorum reads each children and does a vote.
If more than vote_threshold versions are identical the quorum is reached and
this winning version is returned to the guest. So quorum prevents bit corruption.
For high availability purpose minority errors are reported via QMP but the guest
does not see them.
This patch creates the driver C source file and introduces the structures that
will be used in asynchronous reads and writes.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Fri, 21 Feb 2014 20:05:13 +0000 (21:05 +0100)]
check-qdict: Test termination of qdict_array_split()
qdict_array_split() should terminate if it encounters both an entry with
a key of "%u" and entries with keys prefixed "%u." for the same index.
This patch adds a test for this case.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Fri, 21 Feb 2014 18:11:41 +0000 (19:11 +0100)]
check-qdict: Adjust test for qdict_array_split()
Test the new functionality of qdict_array_split(), that is, splitting
off single objects.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Fri, 21 Feb 2014 18:11:40 +0000 (19:11 +0100)]
qdict: Extract non-QDicts in qdict_array_split()
Currently, qdict_array_split() only splits off entries with a key prefix
of "%u.", packing them into a new QDict. This patch makes it support
entries with the plain key "%u" as well, directly putting them into the
new QList without creating a QDict.
If there is both an entry with a key of "%u" and other entries with keys
prefixed "%u." (for the same index), the function simply terminates.
To do this, this patch also adds a static function which tests whether a
given QDict contains any keys with the given prefix. This is used to test
whether entries with a key prefixed "%u." do exist in the source QDict
without modifying it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Fri, 21 Feb 2014 18:11:39 +0000 (19:11 +0100)]
qemu-config: Sections must consist of keys
In config_parse_qdict_section(), the QList returned by
qdict_array_split() is assumed to only contain QDicts. Currently, this
is true but it may (and will) change in the future. Therefore, check
whether the assumption actually holds.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 21 Feb 2014 15:24:08 +0000 (16:24 +0100)]
qemu-iotests: Check qemu-img command line parsing
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Fri, 21 Feb 2014 15:24:07 +0000 (16:24 +0100)]
qemu-img: Allow -o help with incomplete argument list
This patch allows using 'qemu-img $subcmd -o help' for the create,
convert and amend subcommands, without specifying the previously
required filename arguments.
Note that it's still allowed and meaningful to specify a filename: An
invocation like 'qemu-img create -o help sheepdog:foo' will also display
options that are provided by the Sheepdog driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Fri, 21 Feb 2014 15:24:06 +0000 (16:24 +0100)]
qemu-img amend: Support multiple -o options
Instead of ignoring all option values but the last one, multiple -o
options now have the same meaning as having a single option with all
settings in the order of their respective -o options.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Fri, 21 Feb 2014 15:24:05 +0000 (16:24 +0100)]
qemu-img convert: Support multiple -o options
Instead of ignoring all option values but the last one, multiple -o
options now have the same meaning as having a single option with all
settings in the order of their respective -o options.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Fri, 21 Feb 2014 15:24:04 +0000 (16:24 +0100)]
qemu-img create: Support multiple -o options
If you specified multiple -o options for qemu-img create, it would
silently ignore all but the last one. This patch fixes the problem.
Now multiple -o options has the same meaning as having a single option
with all settings in the order of their respective -o options.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Fri, 21 Feb 2014 15:24:03 +0000 (16:24 +0100)]
qemu-option: has_help_option() and is_valid_option_list()
has_help_option() checks if any help option ('help' or '?') occurs
anywhere in an option string, so that things like 'cluster_size=4k,help'
are recognised.
is_valid_option_list() ensures that the option list doesn't have options
with leading commas or trailing unescaped commas.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Paolo Bonzini [Mon, 17 Feb 2014 13:44:07 +0000 (14:44 +0100)]
vdi: say why an image is bad
Instead of just putting it in debugging output, we can now put the
value in an Error.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 17 Feb 2014 13:44:06 +0000 (14:44 +0100)]
block: do not abuse EMEDIUMTYPE
Returning "Wrong medium type" for an image that does not have a valid
header is a bit weird. Improve the error by mentioning what format
was trying to open it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 17 Feb 2014 13:44:05 +0000 (14:44 +0100)]
vmdk: correctly propagate errors
Now that we can return the "right" errors, use the Error** parameter
to pass them back instead of just printing them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 17 Feb 2014 13:44:04 +0000 (14:44 +0100)]
vmdk: do not try opening a file as both image and descriptor
This prepares for propagating errors from vmdk_open_sparse and
vmdk_open_desc_file up to the caller of vmdk_open.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 17 Feb 2014 13:44:03 +0000 (14:44 +0100)]
vmdk: push vmdk_read_desc up to caller
Currently, we just try reading a VMDK file as both image and descriptor.
This makes it hard to choose which of the two attempts gave the best error.
We'll decide in advance if the file looks like an image or a descriptor,
and this patch is the first step to that end.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 17 Feb 2014 13:44:02 +0000 (14:44 +0100)]
vmdk: extract vmdk_read_desc
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 17 Feb 2014 13:44:01 +0000 (14:44 +0100)]
vvfat: correctly propagate errors
Before:
$ ./qemu-io-old
qemu-io-old> open -r -o driver=vvfat,fat-type=24,dir=i386-softmmu
Valid FAT types are only 12, 16 and 32
qemu-io-old: can't open device (null): Could not open image: Invalid argument
After:
$ ./qemu-io
qemu-io> open -r -o driver=vvfat,fat-type=24,dir=i386-softmmu
qemu-io: can't open device (null): Valid FAT types are only 12, 16 and 32
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 17 Feb 2014 13:44:00 +0000 (14:44 +0100)]
vhdx: correctly propagate errors
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 17 Feb 2014 13:43:59 +0000 (14:43 +0100)]
qed: correctly propagate errors
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 17 Feb 2014 13:43:58 +0000 (14:43 +0100)]
qcow: correctly propagate errors
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 17 Feb 2014 13:43:57 +0000 (14:43 +0100)]
curl: correctly propagate errors
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 17 Feb 2014 13:43:56 +0000 (14:43 +0100)]
cow: correctly propagate errors
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 17 Feb 2014 13:43:55 +0000 (14:43 +0100)]
gluster: correctly propagate errors
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 17 Feb 2014 13:43:54 +0000 (14:43 +0100)]
gluster: default scheme to gluster:// and host to localhost.
Currently, "gluster:///volname/img" and (using file. options)
"file.driver=gluster,file.filename=foo" will segfault. Also,
"//host/volname/img" will be rejected, but it is a valid URL
that should be accepted just fine with "file.driver=gluster".
Accept all of these, by inferring missing transport and host
as TCP and localhost respectively.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 17 Feb 2014 13:43:53 +0000 (14:43 +0100)]
iscsi: correctly propagate errors in iscsi_open
Before:
$ ./qemu-io-old
qemu-io-old> open -r -o file.driver=iscsi,file.filename=foo
Failed to parse URL : foo
qemu-io-old: can't open device (null): Could not open 'foo': Invalid argument
After:
$ ./qemu-io
qemu-io> open -r -o file.driver=iscsi,file.filename=foo
qemu-io: can't open device (null): Failed to parse URL : foo
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 17 Feb 2014 13:43:52 +0000 (14:43 +0100)]
iscsi: fix indentation
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 17 Feb 2014 13:43:51 +0000 (14:43 +0100)]
nbd: move socket wrappers to qemu-nbd
qemu-nbd is one of the few valid users of qerror_report_err. Move
the error-reporting socket wrappers there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 17 Feb 2014 13:43:50 +0000 (14:43 +0100)]
nbd: inline tcp_socket_incoming_spec into sole caller
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 17 Feb 2014 13:43:49 +0000 (14:43 +0100)]
nbd: correctly propagate errors
Before:
$ ./qemu-io-old
qemu-io-old> open -r -o file.driver=nbd
one of path and host must be specified.
qemu-io-old: can't open device (null): Could not open image: Invalid argument
$ ./qemu-io-old
qemu-io-old> open -r -o file.driver=nbd,file.host=foo,file.path=bar
path and host may not be used at the same time.
qemu-io-old: can't open device (null): Could not open image: Invalid argument
After:
$ ./qemu-io
qemu-io> open -r -o file.driver=nbd
qemu-io: can't open device (null): one of path and host must be specified.
$ ./qemu-io
qemu-io> open -r -o file.driver=nbd,file.host=foo,file.path=bar
qemu-io: can't open device (null): path and host may not be used at the same time.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 17 Feb 2014 13:43:48 +0000 (14:43 +0100)]
nbd: produce a better error if neither host nor port is passed
Before:
$ qemu-io-old
qemu-io-old> open -r -o file.driver=nbd
qemu-io-old: can't open device (null): Could not open image: Invalid argument
$ ./qemu-io-old
qemu-io-old> open -r -o file.driver=nbd,file.host=foo,file.path=bar
path and host may not be used at the same time.
qemu-io-old: can't open device (null): Could not open image: Invalid argument
After:
$ ./qemu-io
qemu-io> open -r -o file.driver=nbd
one of path and host must be specified.
qemu-io: can't open device (null): Could not open image: Invalid argument
$ ./qemu-io
qemu-io> open -r -o file.driver=nbd,file.host=foo,file.path=bar
path and host may not be used at the same time.
qemu-io: can't open device (null): Could not open image: Invalid argument
Next patch will fix the error propagation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Tue, 18 Feb 2014 17:33:12 +0000 (18:33 +0100)]
block: Remove bdrv_open_image()'s force_raw option
This option is now unnecessary since specifying BDRV_O_PROTOCOL as flag
will do exactly the same.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Tue, 18 Feb 2014 17:33:11 +0000 (18:33 +0100)]
block: Reuse success path from bdrv_open()
The fail and success paths of bdrv_file_open() may be further shortened
by reusing code already existent in bdrv_open(). This includes
bdrv_file_open() not taking the reference to options which allows the
removal of QDECREF(options) in that function.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Tue, 18 Feb 2014 17:33:10 +0000 (18:33 +0100)]
block: Handle bs->options in bdrv_open() only
The fail paths of bdrv_file_open() and bdrv_open() naturally exhibit
similarities, thus it is possible to reuse the one from bdrv_open() and
shorten the one in bdrv_file_open() accordingly.
Also, setting bs->options in bdrv_file_open() is not necessary if it is
already done in bdrv_open().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Tue, 18 Feb 2014 17:33:09 +0000 (18:33 +0100)]
block: Remove bdrv_new() from bdrv_file_open()
Change bdrv_file_open() to take a simple pointer to an already existing
BDS instead of an indirect one. The BDS will be created in bdrv_open()
if necessary.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>