OSDN Git Service
Raveendra Padasalagi [Tue, 16 May 2017 06:52:42 +0000 (12:22 +0530)]
iio: adc: bcm_iproc_adc: swap primary and secondary isr handler's
The third argument of devm_request_threaded_irq() is the primary
handler. It is called in hardirq context and checks whether the
interrupt is relevant to the device. If the primary handler returns
IRQ_WAKE_THREAD, the secondary handler (a.k.a. handler thread) is
scheduled to run in process context.
bcm_iproc_adc.c uses the secondary handler as the primary one
and the other way around. So this patch fixes the same, along with
re-naming the secondary handler and primary handler names properly.
Tested on the BCM9583XX iProc SoC based boards.
Fixes:
4324c97ecedc ("iio: Add driver for Broadcom iproc-static-adc")
Reported-by: Pavel Roskin <plroskin@gmail.com>
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Marcin Niestroj [Thu, 18 May 2017 07:12:06 +0000 (09:12 +0200)]
iio: trigger: fix NULL pointer dereference in iio_trigger_write_current()
In case oldtrig == trig == NULL (which happens when we set none
trigger, when there is already none set) there is a NULL pointer
dereference during iio_trigger_put(trig). Below is kernel output when
this occurs:
[ 26.741790] Unable to handle kernel NULL pointer dereference at virtual address
00000000
[ 26.750179] pgd =
cacc0000
[ 26.752936] [
00000000] *pgd=
8adc6835, *pte=
00000000, *ppte=
00000000
[ 26.759531] Internal error: Oops: 17 [#1] SMP ARM
[ 26.764261] Modules linked in: usb_f_ncm u_ether usb_f_acm u_serial usb_f_fs libcomposite configfs evbug
[ 26.773844] CPU: 0 PID: 152 Comm: synchro Not tainted 4.12.0-rc1 #2
[ 26.780128] Hardware name: Freescale i.MX6 Ultralite (Device Tree)
[ 26.786329] task:
cb1de200 task.stack:
cac92000
[ 26.790892] PC is at iio_trigger_write_current+0x188/0x1f4
[ 26.796403] LR is at lock_release+0xf8/0x20c
[ 26.800696] pc : [<
c0736f34>] lr : [<
c016efb0>] psr:
600d0013
[ 26.800696] sp :
cac93e30 ip :
cac93db0 fp :
cac93e5c
[ 26.812193] r10:
c0e64fe8 r9 :
00000000 r8 :
00000001
[ 26.817436] r7 :
cb190810 r6 :
00000010 r5 :
00000001 r4 :
00000000
[ 26.823982] r3 :
00000000 r2 :
00000000 r1 :
cb1de200 r0 :
00000000
[ 26.830528] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 26.837683] Control:
10c5387d Table:
8acc006a DAC:
00000051
[ 26.843448] Process synchro (pid: 152, stack limit = 0xcac92210)
[ 26.849475] Stack: (0xcac93e30 to 0xcac94000)
[ 26.853857] 3e20:
00000001 c0736dac c054033c cae6b680
[ 26.862060] 3e40:
cae6b680 00000000 00000001 cb3f8610 cac93e74 cac93e60 c054035c c0736db8
[ 26.870264] 3e60:
00000001 c054033c cac93e94 cac93e78 c029bf34 c0540348 00000000 00000000
[ 26.878469] 3e80:
cb3f8600 cae6b680 cac93ed4 cac93e98 c029b320 c029bef0 00000000 00000000
[ 26.886672] 3ea0:
00000000 cac93f78 cb2d41fc caed3280 c029b214 cac93f78 00000001 000e20f8
[ 26.894874] 3ec0:
00000001 00000000 cac93f44 cac93ed8 c0221dcc c029b220 c0e1ca39 cb2d41fc
[ 26.903079] 3ee0:
cac93f04 cac93ef0 c0183ef0 c0183ab0 cb2d41fc 00000000 cac93f44 cac93f08
[ 26.911282] 3f00:
c0225eec c0183ebc 00000001 00000000 c0223728 00000000 c0245454 00000001
[ 26.919485] 3f20:
00000001 caed3280 000e20f8 cac93f78 000e20f8 00000001 cac93f74 cac93f48
[ 26.927690] 3f40:
c0223680 c0221da4 c0246520 c0245460 caed3283 caed3280 00000000 00000000
[ 26.935893] 3f60:
000e20f8 00000001 cac93fa4 cac93f78 c0224520 c02235e4 00000000 00000000
[ 26.944096] 3f80:
00000001 000e20f8 00000001 00000004 c0107f84 cac92000 00000000 cac93fa8
[ 26.952299] 3fa0:
c0107de0 c02244e8 00000001 000e20f8 0000000e 000e20f8 00000001 fbad2484
[ 26.960502] 3fc0:
00000001 000e20f8 00000001 00000004 beb6b698 00064260 0006421c beb6b4b4
[ 26.968705] 3fe0:
00000000 beb6b450 b6f219a0 b6e2f268 800d0010 0000000e cac93ff4 cac93ffc
[ 26.976896] Backtrace:
[ 26.979388] [<
c0736dac>] (iio_trigger_write_current) from [<
c054035c>] (dev_attr_store+0x20/0x2c)
[ 26.988289] r10:
cb3f8610 r9:
00000001 r8:
00000000 r7:
cae6b680 r6:
cae6b680 r5:
c054033c
[ 26.996138] r4:
c0736dac r3:
00000001
[ 26.999747] [<
c054033c>] (dev_attr_store) from [<
c029bf34>] (sysfs_kf_write+0x50/0x54)
[ 27.007686] r5:
c054033c r4:
00000001
[ 27.011290] [<
c029bee4>] (sysfs_kf_write) from [<
c029b320>] (kernfs_fop_write+0x10c/0x224)
[ 27.019579] r7:
cae6b680 r6:
cb3f8600 r5:
00000000 r4:
00000000
[ 27.025271] [<
c029b214>] (kernfs_fop_write) from [<
c0221dcc>] (__vfs_write+0x34/0x120)
[ 27.033214] r10:
00000000 r9:
00000001 r8:
000e20f8 r7:
00000001 r6:
cac93f78 r5:
c029b214
[ 27.041059] r4:
caed3280
[ 27.043622] [<
c0221d98>] (__vfs_write) from [<
c0223680>] (vfs_write+0xa8/0x170)
[ 27.050959] r9:
00000001 r8:
000e20f8 r7:
cac93f78 r6:
000e20f8 r5:
caed3280 r4:
00000001
[ 27.058731] [<
c02235d8>] (vfs_write) from [<
c0224520>] (SyS_write+0x44/0x98)
[ 27.065806] r9:
00000001 r8:
000e20f8 r7:
00000000 r6:
00000000 r5:
caed3280 r4:
caed3283
[ 27.073582] [<
c02244dc>] (SyS_write) from [<
c0107de0>] (ret_fast_syscall+0x0/0x1c)
[ 27.081179] r9:
cac92000 r8:
c0107f84 r7:
00000004 r6:
00000001 r5:
000e20f8 r4:
00000001
[ 27.088947] Code:
1a000009 e1a04009 e3a06010 e1a05008 (
e5943000)
[ 27.095244] ---[ end trace
06d1dab86d6e6bab ]---
To fix that problem call iio_trigger_put(trig) only when trig is not
NULL.
Fixes:
d5d24bcc0a10 ("iio: trigger: close race condition in acquiring trigger reference")
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Jacopo Mondi [Tue, 9 May 2017 07:57:57 +0000 (09:57 +0200)]
iio: adc: max9611: Fix attribute measure unit
The power and current "shunt-resistor" attribute's 'show' function
displays the resistor value in milli-Ohms, while the ABI description
specifies it should be displayed in Ohms. Fix it.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Dan Carpenter [Wed, 10 May 2017 05:51:09 +0000 (08:51 +0300)]
iio: adc: ti_am335x_adc: allocating too much in probe
We should be allocating enough information for a tiadc_device struct
which is about 400 bytes but instead we allocate enough for a second
iio_dev struct which is over 2000 bytes.
Fixes:
fea89e2dfcea ("iio: adc: ti_am335x_adc: use variable names for sizeof() operator")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Eduardo Molinas [Mon, 1 May 2017 22:45:59 +0000 (18:45 -0400)]
iio: adc: sun4i-gpadc-iio: Fix module autoload when OF devices are registered
If the driver is built as a module, it won't be autloaded if the devices
are registered via OF code because the OF device table
entries are not exported as aliases
Before the patch:
$ modinfo drivers/iio/adc/sun4i-gpadc-iio.ko | grep alias
alias: platform:sun6i-a31-gpadc-iio
alias: platform:sun5i-a13-gpadc-iio
alias: platform:sun4i-a10-gpadc-iio
After the patch:
$ modinfo drivers/iio/adc/sun4i-gpadc-iio.ko | grep alias
alias: of:N*T*Callwinner,sun8i-a33-thsC*
alias: of:N*T*Callwinner,sun8i-a33-ths
alias: platform:sun6i-a31-gpadc-iio
alias: platform:sun5i-a13-gpadc-iio
alias: platform:sun4i-a10-gpadc-iio
Signed-off-by: Eduardo Molinas <edu.molinas@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Eduardo Molinas [Mon, 1 May 2017 22:45:58 +0000 (18:45 -0400)]
iio: adc: sun4i-gpadc-iio: Fix module autoload when PLATFORM devices are registered
If the driver is built as a module, it won't be autloaded if the devices
are registered via PLATFORM code because the PLATFORM device table
entries are not exported as aliases
Before the patch:
$ modinfo drivers/iio/adc/sun4i-gpadc-iio.ko | grep alias
$
After the patch:
$ modinfo drivers/iio/adc/sun4i-gpadc-iio.ko | grep alias
alias: platform:sun6i-a31-gpadc-iio
alias: platform:sun5i-a13-gpadc-iio
alias: platform:sun4i-a10-gpadc-iio
Signed-off-by: Eduardo Molinas <edu.molinas@gmail.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Matt Ranostay [Fri, 5 May 2017 00:32:19 +0000 (17:32 -0700)]
iio: proximity: as3935: fix iio_trigger_poll issue
Using iio_trigger_poll() can oops when multiple interrupts
happen before the first is handled.
Use iio_trigger_poll_chained() instead and use the timestamp
when processed, since it will be in theory be 2 ms max latency.
Fixes:
24ddb0e4bba4 ("iio: Add AS3935 lightning sensor support")
Cc: stable@vger.kernel.org
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Matt Ranostay [Thu, 27 Apr 2017 07:52:32 +0000 (00:52 -0700)]
iio: proximity: as3935: fix AS3935_INT mask
AS3935 interrupt mask has been incorrect so valid lightning events
would never trigger an buffer event. Also noise interrupt should be
BIT(0).
Fixes:
24ddb0e4bba4 ("iio: Add AS3935 lightning sensor support")
CC: stable@vger.kernel.org
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Dan Carpenter [Thu, 20 Apr 2017 10:26:18 +0000 (13:26 +0300)]
iio: adc: Max9611: checking for ERR_PTR instead of NULL in probe
devm_iio_device_alloc() doesn't return ERR_PTRs, it returns NULLs.
Fixes:
69780a3bbc0b ("iio: adc: Add Maxim max9611 ADC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Matt Ranostay [Fri, 14 Apr 2017 23:38:19 +0000 (16:38 -0700)]
iio: proximity: as3935: recalibrate RCO after resume
According to the datasheet the RCO must be recalibrated
on every power-on-reset. Also remove mutex locking in the
calibration function since callers other than the probe
function (which doesn't need it) will have a lock.
Fixes:
24ddb0e4bba4 ("iio: Add AS3935 lightning sensor support")
Cc: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Laura Abbott [Tue, 18 Apr 2017 18:27:14 +0000 (11:27 -0700)]
staging/android: Update Ion TODO list
Most of the items have been taken care of by a clean up series. Remove
the completed items and add a few new ones.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laura Abbott [Tue, 18 Apr 2017 18:27:13 +0000 (11:27 -0700)]
staging: android: ion: Set query return value
This never got set in the ioctl. Properly set a return value of 0 on
success.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laura Abbott [Tue, 18 Apr 2017 18:27:12 +0000 (11:27 -0700)]
staging: android: ion: Remove ion_handle and ion_client
ion_handle was introduced as an abstraction to represent a reference to
a buffer via an ion_client. As frameworks outside of Ion evolved, the dmabuf
emerged as the preferred standard for use in the kernel. This has made
the ion_handle an unnecessary abstraction and prone to race
conditions. ion_client is also now only used internally. We have enough
mechanisms for race conditions and leaks already so just drop ion_handle
and ion_client. This also includes ripping out most of the debugfs
infrastructure since much of that was tied to clients and handles.
The debugfs infrastructure was prone to give confusing data (orphaned
allocations) so it can be replaced with something better if people
actually want it.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laura Abbott [Tue, 18 Apr 2017 18:27:11 +0000 (11:27 -0700)]
staging: android: ion: Drop ion_map_kernel interface
Nobody uses this interface externally. Drop it.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laura Abbott [Tue, 18 Apr 2017 18:27:10 +0000 (11:27 -0700)]
staging: android: ion: Rework heap registration/enumeration
The current model of Ion heap registration is based on the outdated
model of board files. The replacement for board files (devicetree)
isn't a good replacement for what Ion wants to do. In actuality, Ion
wants to show what memory is available in the system for something else
to figure out what to use. Switch to a model where Ion creates its
device unconditionally and heaps are registed as available regions.
Currently, only system and CMA heaps are converted over to the new
model. Carveout and chunk heaps can be converted over when someone wants
to figure out how.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laura Abbott [Tue, 18 Apr 2017 18:27:09 +0000 (11:27 -0700)]
staging: android: ion: Collapse internal header files
Ion current has ion_priv.h and ion.h as header files. ion.h was intended
to be used for public APIs but Ion never ended up really having anything
public. Combine the two headers so there is only one internal header.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laura Abbott [Tue, 18 Apr 2017 18:27:08 +0000 (11:27 -0700)]
staging: android: ion: Get rid of ion_phys_addr_t
Once upon a time, phys_addr_t was not everywhere in the kernel. These
days it is used enough places that having a separate Ion type doesn't
make sense. Remove the extra type and just use phys_addr_t directly.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laura Abbott [Tue, 18 Apr 2017 18:27:07 +0000 (11:27 -0700)]
staging: android: ion: Break the ABI in the name of forward progress
Several of the Ion ioctls were designed in such a way that they
necessitate compat ioctls. We're breaking a bunch of other ABIs and
cleaning stuff up anyway so let's follow the ioctl guidelines and clean
things up while everyone is busy converting things over anyway. As part
of this, also remove the useless alignment field from the allocation
structure.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laura Abbott [Tue, 18 Apr 2017 18:27:06 +0000 (11:27 -0700)]
staging: android: ion: Stop butchering the DMA address
Now that we have proper caching, stop setting the DMA address manually.
It should be set after properly calling dma_map.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laura Abbott [Tue, 18 Apr 2017 18:27:05 +0000 (11:27 -0700)]
staging: android: ion: Use CMA APIs directly
When CMA was first introduced, its primary use was for DMA allocation
and the only way to get CMA memory was to call dma_alloc_coherent. This
put Ion in an awkward position since there was no device structure
readily available and setting one up messed up the coherency model.
These days, CMA can be allocated directly from the APIs. Switch to using
this model to avoid needing a dummy device. This also mitigates some of
the caching problems (e.g. dma_alloc_coherent only returning uncached
memory).
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laura Abbott [Tue, 18 Apr 2017 18:27:04 +0000 (11:27 -0700)]
cma: Introduce cma_for_each_area
Frameworks (e.g. Ion) may want to iterate over each possible CMA area to
allow for enumeration. Introduce a function to allow a callback.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laura Abbott [Tue, 18 Apr 2017 18:27:03 +0000 (11:27 -0700)]
cma: Store a name in the cma structure
Frameworks that may want to enumerate CMA heaps (e.g. Ion) will find it
useful to have an explicit name attached to each region. Store the name
in each CMA structure.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 18 Apr 2017 17:38:38 +0000 (19:38 +0200)]
Merge tag 'iio-fixes-for-4.11e' of git://git./linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Fifth set of IIO fixes for the 4.11 cycle.
As these are rather late in the cycle, they may sneak over into 4.12.
There is a fix for a regression caused by another fix (hid sensors
hardware seems to vary a lot in how various corner cases are handled).
* ad7303
- fix channel description. Numeric values were being passed as characters
presumably leading to garbage from the userspace interface.
* as3935
- the write data macro was wrong so fix it.
* bmp280
- incorrect handling of negative values as being unsigned broke humidity
calculation.
* hid-sensor
- Restore the poll and hysteresis values after resume as some hardware
doesn't do it.
* stm32-trigger
- buglet in reading the sampling frequency
Greg Kroah-Hartman [Tue, 18 Apr 2017 15:13:31 +0000 (17:13 +0200)]
Merge tag 'iio-for-4.12d' of git://git./linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Fourth set of IIO new device support, features and cleanups for the 4.12 cycle
New device support
* max1117, 1118 and 1119
- new ADC driver
* max9611
- new ADC driver
* pm8xxx hk/xoadc
- new driver with some shared features broken out from the SPMI vadc.
* sun4i-gpadc
- A33 thermal sensor support (with associated rework)
* stm32-dac
- new driver and bindings
* stm32 trigger
- enable support of quadrature encoder device and counter modes
Features
* apds9960
- use the runtime pm for normal suspend
* stm32-adc
- add opition to sest resolution via devicetree
* xoadc
- augment DT bindings to deal with some weird mux cases
Cleanups
* ad5933
- protect direct mode using claim and release helpers
*
ade7759
- S_IRUGO and friends to octal in two goes
* adis16203
- drop unnecessary brackets
* hid-sensor
- fix unbalanced pm_runtieme_enable error when probing after remove
* lsm6dsx
- use actual part numbers for device name when known
- simplify data read pin parsing
* mpu3050
- avoid double reporting errors
Martin Karamihov [Mon, 17 Apr 2017 17:00:25 +0000 (20:00 +0300)]
staging: rtl8192u: fix incorrect type in assignment in ieee80211_tx.c
This patch fixes the following sparse warning:
ieee80211_tx.c:174:36: incorrect type in assignment (different base types)
ieee80211_tx.c:174:36: expected unsigned short [unsigned] [short] [usertype] <noident>
ieee80211_tx.c:174:36: got restricted __be16 [usertype] <noident>
by adding left side cast to __be16.
Signed-off-by: Martin Karamihov <martinowar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aishwarya Pant [Sat, 15 Apr 2017 12:38:39 +0000 (18:08 +0530)]
staging: rtl8188eu: fix sparse signedness warnings in rtw_generate_ie
Changed the type of wpa_ie_len from (int *) to (unsigned int *) in the
function rtw_get_wpa_ie(..) to suppress signedness mismatch warnings in
rtw_generate_ie of the type-
drivers/staging/rtl8188eu//core/rtw_ieee80211.c:1009:60: warning: incorrect
type in argument 2 (different signedness)
drivers/staging/rtl8188eu//core/rtw_ieee80211.c:1009:60: expected int
*wpa_ie_len
drivers/staging/rtl8188eu//core/rtw_ieee80211.c:1009:60: got unsigned
int *<noident>
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aishwarya Pant [Sat, 15 Apr 2017 12:38:10 +0000 (18:08 +0530)]
staging: rtl8188eu: fix sparse signedness warnings in rtw_set_ie
Changed the type of sz from (int) to (unsigned int) to suppress
signedness mismatch warnings of the type-
drivers/staging/rtl8188eu//core/rtw_ieee80211.c:258:97: warning:
incorrect type in argument 5 (different signedness)
drivers/staging/rtl8188eu//core/rtw_ieee80211.c:258:97: expected
unsigned int [usertype] *frlen
drivers/staging/rtl8188eu//core/rtw_ieee80211.c:258:97: got int
*<noident>
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aishwarya Pant [Sat, 15 Apr 2017 12:37:42 +0000 (18:07 +0530)]
staging: rtl8188eu: fix sparse signedness warnings in rtw_get_ie
Changed the type of len from (int *) to (unsigned int *) in the
function rtw_get_ie(..) and wherever this function is called to
suppress signedness mismatch warnings of the type-
drivers/staging/rtl8188eu//core/rtw_ap.c:78:60: warning: incorrect type
in argument 3 (different signedness)
drivers/staging/rtl8188eu//core/rtw_ap.c:78:60: expected int *len
drivers/staging/rtl8188eu//core/rtw_ap.c:78:60: got unsigned int
*<noident>
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Thu, 13 Apr 2017 15:46:36 +0000 (16:46 +0100)]
staging: rtl8723bs: clean up identical code on an if statement
The two different paths for an if statement are identical and hence
we can just replace it with the single statement.
Detected by CoverityScan, CID#
1428443 ("Identical code for
different branches")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Thu, 13 Apr 2017 14:13:46 +0000 (15:13 +0100)]
staging: rtl8723bs: remove redundant comparisons of unsigned ints with >= 0
The comparison of mode >= 0 is redundant as mode is a u32 and this
is always true. Remove this redundant code.
Detected with CoverityScan ("Unsigned compared against 0")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kevin Wern [Tue, 11 Apr 2017 22:17:02 +0000 (18:17 -0400)]
staging: media/platform/bcm2835: remove gstreamer workaround
Gstreamer's v4l2src reacted poorly to certain outputs from the bcm2835
video driver's ioctl ops function vidioc_enum_framesizes, so a
workaround was created that could be activated by user input. This
workaround would replace the driver's ioctl ops struct with another,
similar struct--only with no function pointed to by
vidioc_enum_framesizes. With no response, gstreamer would attempt to
continue with some default settings that happened to work better.
However, this bug has been fixed in gstreamer since 2014, so we
shouldn't include this workaround in the stable version of the driver.
Signed-off-by: Kevin Wern <kevin.m.wern@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Tue, 18 Apr 2017 00:35:42 +0000 (10:35 +1000)]
staging: ks7010: fix checkpatch SPLIT_STRING
Checkpatch emits WARNING: quoted string split across lines.
Concatenate string onto single line.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Tue, 18 Apr 2017 00:35:41 +0000 (10:35 +1000)]
staging: ks7010: refactor SDIO read/write helpers
Driver SDIO code uses helper functions to do IO to the SDIO
device. Current helpers handle IO of a single byte as well as
multi-byte. Driver predominately uses single byte IO. If the
common case is made simple it simplifies the whole driver. The common
case can be made simple by splitting the multi-byte and single byte
calls into separate functions, i.e 4 functions in total, read single
byte, read multi-byte, write single byte, write multi-byte.
Also, we need to handle the debug code. Currently debug calls after
read/write fail access the IO buffer. This buffer, at best, does not hold
useful data on the error path, at worst is uninitialized and holds
garbage.
Split read/write helper functions into two functions each, one for
single byte IO and one for multi-byte IO. Fix all call sites. Do not
change the program logic.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Tue, 18 Apr 2017 00:35:40 +0000 (10:35 +1000)]
staging: ks7010: fix checkpatch LINE_SPACING
Checkpatch emits CHECK: Please don't use multiple blank lines.
Remove multiple blank lines.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Tue, 18 Apr 2017 00:35:39 +0000 (10:35 +1000)]
staging: ks7010: fix checkpatch SPACE_BEFORE_TAB
Checkpatch emits WARNING: please, no space before tabs.
Remove space before tabs.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Tue, 18 Apr 2017 00:35:38 +0000 (10:35 +1000)]
staging: ks7010: remove err_ from non-error path label
goto label includes 'err_' suffix but is executed on non-error paths.
Remove err_ suffix from goto label.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Tue, 18 Apr 2017 00:35:37 +0000 (10:35 +1000)]
staging: ks7010: clean up SDIO source comments
SDIO code currently has a number of unneeded comments. Following
kernel coding style we do not need extraneous comments, especially on
code where it is clear what is being done. Spelling typos can be
fixed.
Remove unnecessary comments, fix typos in comments.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Tue, 18 Apr 2017 00:35:36 +0000 (10:35 +1000)]
staging: ks7010: add struct comment to ks_sdio_card
ks_sdio_card structure description does not have a kernel doc format
comment.
Add kernel doc format comment to struct ks_sdio_card.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Tue, 18 Apr 2017 00:35:35 +0000 (10:35 +1000)]
staging: ks7010: move hw info into dev private data
Currently driver uses a hardware information struct description to
group some SDIO related functionality (work, work queue, sdio private
data pointer). This structure is then embedded in the device private
data structure. Having nested structures described in different header
files means that to view the device private data programmers must open
two header files. This structure could be embedded anonymously in the
device private data and achieve the same result (grouping of function
specific to SDIO) without the need to open multiple headers. However,
the SDIO private data structure already has various different data and
pointers, adding the embedded structure adds little extra meaning and
lengthens all the dereferences throughout the driver, often meaning
addition line breaks and braces. We can increase readability and
reduce code complexity by moving the hardware information data and
pointers to directly be within the device private data structure
description.
While preparing for this refactoring it was noted that the identifier
currently used for the delayed work is 'rw_wq', this is confusing
since the 'wq' suffix typically means 'work queue'. This identifier
would be more meaningful if it used the suffix 'dwork' as does the
declaration of queue_delayed_work() (include/linux/workqueue.h).
The identifier for the work queue is currently 'ks7010sdio_wq'. This
identifier can be shortened without loss of meaning because there is
only one work queue within the driver. Identifier 'wq' is typical
within in-tree driver code and aptly describes the pointer.
Current pointer to the SDIO private data is identified by 'sdio_card',
this is sufficiently meaningful from within the hw_info structure but
once the hw_info_t structure is removed the pointer would be better to
have a prefix appended to it to retain the prior level of meaning.
Move members from struct hw_info_t to struct ks_wlan_private.
Rename identifiers;
struct delayed_work pointer 'rw_wq' to 'rw_dwork'.
struct workqueue_struct pointer 'ks7010sdio_wq' to 'wq'.
struct ks_sdio_card pointer 'sdio_card' to 'ks_sdio_card'.
Remove structure description hw_info_t. Fix init/destroy calls. Fix
all call sites, SDIO private data access calls, and queuing calls.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Tue, 18 Apr 2017 00:35:34 +0000 (10:35 +1000)]
staging: ks7010: move tasklet_struct to ks_wlan_private
Currently a pointer to the tasklet_struct used for bottom half
processing on the receive path is within the hw_info_t structure. This
structure is then embedded in the device private data
structure. Having the tasklet_struct nested does not add meaning to
the device private data, device private data already (and typically)
has various data relating to the device, there is no real need to
separate the tasklet_struct to a SDIO specific structure. While not
adding allot of extra meaning having the nested structure means the
programmer must open two header files to read the description of the
device private data, the code would be easier to read if the device
private data struct description was not spread over two files.
Move tasklet_struct out of sdio header file and into the device
private data structure description.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Tue, 18 Apr 2017 00:35:33 +0000 (10:35 +1000)]
staging: ks7010: rename wakeup work struct
struct work_struct uses identifier ks_wlan_wakeup_task, this is
confusing because the 'task' suffix implies that this is a
tasklet_struct instead of a work struct. Suffix 'work' would be more
clear. The code would be easier to read if it followed the principle
of least surprise and used the 'work' suffix for a work_struct
identifier.
Rename work_struct structure 'ks_wlan_wakeup_task' to 'wakeup_work'.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Tue, 18 Apr 2017 00:35:32 +0000 (10:35 +1000)]
staging: ks7010: clean up SDIO header comments
SDIO header file does not use kernel doc format struct
comments. Adding them aids readability and enables documentation to be
built from the source code. Other comments may be tidied up as we do this.
Add kernel format struct comments. Tidy up comments.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Tue, 18 Apr 2017 00:35:31 +0000 (10:35 +1000)]
staging: ks7010: fix complete_handler
complete_handler() takes void * types as parameters. void * parameters are then
cast to struct types. Call sites for this function either pass in NULL
or pointers to the struct types cast to void *. This casting is
unnecessary and can be removed.
Struct tx_device_buffer (which contains a pointer member to the
complete_handler() function) has as member 'ks_wlan_priv *priv' this is
unnecessary, we always have a pointer to this struct there is no need
to store it here.
The complete_handler can be more clearly defined by using struct
pointer types instead of void * types. The code is currently
unnecessarily complex, storing and passing extraneous pointer
parameters.
Remove unnecessary parameters, unnecessary casting to/from 'void
*'. Fix all call sites involving complete_handler().
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Tue, 18 Apr 2017 00:35:30 +0000 (10:35 +1000)]
staging: ks7010: replace defines with enum types
Header has multiple constants defined using preprocessor
directive. In the cases where these are an integer progression an
enumeration type can be used. Doing so adds documentation to the code
and makes the usage explicit. Maintain original constant value, this
value is returned by the device.
Replace (integer progression) preprocessor constants with enumeration
type.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Tue, 18 Apr 2017 00:35:29 +0000 (10:35 +1000)]
staging: ks7010: create reg_status_type enum type
SDIO header currently defines unused constants READ_STATUS_BUSY and
WRITE_STATUS_IDLE. There are reciprocal constants that are used
READ_STATUS_IDLE and WRITE_STATUS_BUSY. We can roll these into a
single enumeration type and remove the two that are unused.
Add enumeration type containing IDLE/BUSY pair that are currently used
within the SDIO source. Change source to use new enum types.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Darryl T. Agostinelli [Thu, 13 Apr 2017 01:36:15 +0000 (20:36 -0500)]
staging: greybus: uart.c: Remove include linux/serial.h
$ make includecheck | grep staging
./drivers/staging/greybus/uart.c: linux/serial.h is included more than once.
Signed-off-by: Darryl T. Agostinelli <dagostinelli@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Darryl T. Agostinelli [Thu, 13 Apr 2017 01:36:14 +0000 (20:36 -0500)]
staging: greybus: light.c: Remove include linux/version.h
Fixes:
$ make versioncheck | grep staging
./drivers/staging/greybus/light.c: 15 linux/version.h not needed.
Signed-off-by: Darryl T. Agostinelli <dagostinelli@gmail.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Skanda Guruanand [Sun, 16 Apr 2017 00:48:59 +0000 (17:48 -0700)]
staging: lustre: Fix sparse endianness warnings cast to restricted __le64 and __le32
The struct lu_dirpage elements in lustre_idl.h file are modified to
__le64 and __le32 types since the elements are always converted from
litte endian to processor native format in mdc_request.c file.
Following warnings are removed by this fix.
drivers/staging/lustre/lustre/mdc/mdc_request.c:958:42: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:959:42: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:962:42: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:963:42: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:985:50: warning: cast to restricted __le32
drivers/staging/lustre/lustre/mdc/mdc_request.c:1193:24: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:1328:25: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:1329:23: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:1332:25: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:1333:23: warning: cast to restricted __le64
Signed-off-by: Skanda Guruanand <skanda.kashyap@gmail.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Craig Inches [Thu, 13 Apr 2017 09:24:41 +0000 (10:24 +0100)]
Staging: lustre cleanup macros in libcfs_private.h
This resolves a checkpatch warning that "Single statement macros should
not use a do {} while (0) loop" by removing the loop and adjusting line
length accordingly.
Signed-off-by: Craig Inches <Craig@craiginches.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexandre Bailon [Sun, 26 Mar 2017 16:58:23 +0000 (18:58 +0200)]
staging: greybus: make cport_quiesce() method optional
The cport_quiesce() method is mandatory in the case of
the es2 Greybus hd controller to shutdown the cports on
the es2 controller.
In order to add support of another controller which may not
need to shutdown its cports, make the cport_quiesce() optional,
and check if the controller implement it before to use it.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Gortmaker [Thu, 13 Apr 2017 01:57:55 +0000 (21:57 -0400)]
staging/media: make atomisp vlv2_plat_clock explicitly non-modular
The Makefile / Kconfig currently controlling compilation of this code is:
clock/Makefile:obj-$(CONFIG_INTEL_ATOMISP) += vlv2_plat_clock.o
atomisp/Kconfig:menuconfig INTEL_ATOMISP
atomisp/Kconfig: bool "Enable support to Intel MIPI camera drivers"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init was already not in use by this driver, the init
ordering remains unchanged with this commit.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Cox <alan@linux.intel.com>
Cc: linux-media@vger.kernel.org
Cc: devel@driverdev.osuosl.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 18 Apr 2017 11:20:22 +0000 (13:20 +0200)]
staging: atomisp: remove odd 'list' file
This removes a strange 'list' file in
drivers/staging/media/atomisp/pci/atomisp2/ that was not being used for
anything.
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 18 Apr 2017 11:19:16 +0000 (13:19 +0200)]
staging: atomisp: fix build breakage from files going away
Previous patches deleted files, but the Makefile still referenced their
.o files. Fix this up by removing them in the Makefile.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Klinger [Mon, 10 Apr 2017 17:00:01 +0000 (19:00 +0200)]
IIO: bmp280-core.c: fix error in humidity calculation
While calculating the compensation of the humidity there are negative values
interpreted as unsigned because of unsigned variables used. These values as
well as the constants need to be casted to signed as indicated by the
documentation of the sensor.
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Matt Ranostay [Thu, 13 Apr 2017 02:16:57 +0000 (19:16 -0700)]
iio: light: apds9960: add system-wide suspend
APDS9960 can safely force runtime suspend if the system wants
to enter system-wide suspend
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Fabrice Gasnier [Mon, 10 Apr 2017 15:49:50 +0000 (17:49 +0200)]
iio: dac: add support for stm32 DAC
Add support for STMicroelectronics STM32 DAC. It's a 12-bit, voltage
output digital-to-analog converter. It has two output channels, each
with its own converter.
It supports 8 bits or 12bits left/right aligned data format. Only
12bits right-aligned is used here. It has built-in noise or
triangle waveform generator, and supports external triggers for
conversions.
Each channel can be used independently, with separate trigger, then
separate IIO devices are used to handle this. Core driver is intended
to share common resources such as clock, reset, reference voltage and
registers.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Fabrice Gasnier [Mon, 10 Apr 2017 15:49:49 +0000 (17:49 +0200)]
dt-bindings: iio: stm32-dac: Add support for STM32 DAC
Document STMicroelectronics STM32 DAC (digital-to-analog converter).
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
René Hickersberger?= [Thu, 13 Apr 2017 13:51:37 +0000 (15:51 +0200)]
Staging: iio: accel: adis16203: fixed a brace coding style issue
Fixed a brace coding style issue.
Signed-off-by: René Hickersberger <renehickersberger@gmx.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lorenzo Bianconi [Sun, 9 Apr 2017 18:03:37 +0000 (20:03 +0200)]
iio: imu: st_lsm6dsx: simplify data ready pin parsing
Simplify st_lsm6dsx_of_get_drdy_pin routine since of_property_read_u32
error conditions are already managed in st_lsm6dsx_get_drdy_reg()
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Chen Guanqiao [Sun, 9 Apr 2017 15:21:00 +0000 (23:21 +0800)]
iio:meter:
ade7759: Removing use of deprecated macros (S_IRUGO, S_IWUSR)
This fixes the coding style issue of using (S_IWUSR | S_IRUGO) in place of
4-digit octal numbers.
Signed-off-by: Chen Guanqiao <chen.chenchacha@foxmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Narcisa Ana Maria Vasile [Sun, 9 Apr 2017 10:40:07 +0000 (13:40 +0300)]
staging: iio: ad5933: Protect DIRECT mode using claim/release helpers
This device operates in DIRECT_MODE and BUFFER_HARDWARE mode.
Replace usages of iio_dev->mlock with iio_device_{claim|release}_direct_mode()
helper functions to guarantee DIRECT mode and consequently protect
BUFFER mode too.
Add and use a device private lock to protect against conflicting access of the
state data.
This helps with IIO subsystem redefining iio_dev->mlock to be used by
the IIO core only for protecting device operating mode changes.
ie. Changes between INDIO_DIRECT_MODE, INDIO_BUFFER_* modes.
Protect changing of attributes inside ad5933_store(). Attributes
can no longer be changed while in buffered mode.
Remove lock from ad5933_work() because buffer mode should be enabled
when we reach this, and claiming DIRECT mode in all the other places
should protect it.
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Akinobu Mita [Tue, 28 Mar 2017 16:34:48 +0000 (01:34 +0900)]
iio: adc: add max1117/max1118/max1119 ADC driver
This adds max1117/max1118/max1119 8-bit, dual-channel ADC driver.
This new driver uses the zero length spi_transfers with the cs_change
flag set and/or the non-zero delay_usecs.
1. The zero length transfer with the spi_transfer.cs_change set is
required in order to select CH1. The chip select line must be brought
high and low again without transfer.
2. The zero length transfer with the spi_transfer.delay_usecs > 0 is
required for waiting the conversion to be complete. The conversion
begins with the falling edge of the chip select. During the conversion
process, SCLK is ignored.
These two usages are unusual. But the spi controller drivers that use
a default implementation of transfer_one_message() are likely to work.
(I've tested this adc driver with spi-omap2-mcspi and spi-xilinx)
On the other hand, some spi controller drivers that have their own
transfer_one_message() may not work. But at least for the zero length
transfer with delay_usecs > 0, I'm proposing a new testcase for the
spi-loopback-test that can test whether the delay_usecs setting has
taken effect.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Chen Guanqiao [Sun, 9 Apr 2017 04:30:26 +0000 (12:30 +0800)]
iio:meter:
ade7759: Removing use of deprecated macros (S_IRUGO, S_IWUSR, S_IXUGO)
Removing use of deprecated macros(S_IRUGO, S_IWUSR, S_IXUGO), and replace
with 4 digit octal.
Signed-off-by: Chen Guanqiao <chen.chenchacha@foxmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Benjamin Gaignard [Tue, 4 Apr 2017 07:47:52 +0000 (09:47 +0200)]
iio: stm32 trigger: Add counter enable modes
Device counting could be controlled by the level or the edges of
a trigger.
in_count0_enable_mode attibute allow to set the control mode.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Benjamin Gaignard [Tue, 4 Apr 2017 07:47:51 +0000 (09:47 +0200)]
iio: stm32 trigger: Add quadrature encoder device
One of the features of STM32 trigger hardware block is a quadrature
encoder that can counts up/down depending of the levels and edges
of the selected external pins.
This patch allow to read/write the counter, get it direction,
set/get quadrature modes and get scale factor.
When counting up preset value is the limit of the counter.
When counting down the counter start from preset value down to 0.
This preset value could be set/get by using
/sys/bus/iio/devices/iio:deviceX/in_count0_preset attribute.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Reviewed-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Matt Ranostay [Fri, 14 Apr 2017 06:21:56 +0000 (23:21 -0700)]
iio: proximity: as3935: fix as3935_write
AS3935_WRITE_DATA macro bit is incorrect and the actual write
sequence is two leading zeros.
Cc: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Pavel Roskin [Thu, 13 Apr 2017 21:54:23 +0000 (14:54 -0700)]
iio: dac: ad7303: fix channel description
realbits, storagebits and shift should be numbers, not ASCII characters.
Signed-off-by: Pavel Roskin <plroskin@gmail.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Tobin C. Harding [Tue, 11 Apr 2017 23:56:50 +0000 (09:56 +1000)]
staging: ks7010: remove unused spin_lock
Driver SDIO private data structure description includes a spin_lock
that is never used. This data structure only contains a pointer to the
sdio_func and a pointer to the main device private data. A spin_lock
is not required here.
Remove unused spin_lock.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Tue, 11 Apr 2017 23:56:49 +0000 (09:56 +1000)]
staging: ks7010: remove unused structure description
Driver SDIO header describes a structure that is never used. It can be
safely removed.
Remove unused structure description.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Tue, 11 Apr 2017 23:56:48 +0000 (09:56 +1000)]
staging: ks7010: remove unused read_buf
Driver SDIO code allocates memory for a buffer that is never used. It
can be safely removed.
Remove unused buffer, including allocation and freeing of memory.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Tue, 11 Apr 2017 23:56:47 +0000 (09:56 +1000)]
staging: ks7010: remove unused completion
Driver SDIO code initializes a completion that is never used. It can
be safely removed.
Remove unused completion.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Tue, 11 Apr 2017 21:21:47 +0000 (22:21 +0100)]
staging: rtl8723bs: ensure cmd is large enough for %4s scanf format
char array cmd is being scanned in using a %4s scanf format
specifier and so cmd must be an array of 5 chars. Increase size
to 5 chars to ensure we don't have an overflow.
Detected with static analysis by cppcheck:
"(error) Width 4 given in format string (no. 1) is larger than
destination buffer 'cmd[4]', use %3s to prevent overflowing it."
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Wed, 12 Apr 2017 08:31:53 +0000 (11:31 +0300)]
staging: lustre: checking for NULL instead if IS_ERR
lustre_cfg_new() returns error pointers and never NULL.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Valerio Genovese [Sun, 2 Apr 2017 19:43:46 +0000 (21:43 +0200)]
staging: media: atomisp: i2c: removed unnecessary white space before comma in memset()
Removed extra space before comma in memset() as a part of
checkpatch.pl fix-up.
Signed-off-by: Valerio Genovese <valerio.click@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Wed, 29 Mar 2017 21:12:21 +0000 (23:12 +0200)]
staging: atomisp: avoid false-positive maybe-uninitialized warning
In combination with CONFIG_PROFILE_ANNOTATED_BRANCHES=y, the unlikely()
inside of the WARN() macro becomes too complex for gcc to see that
we don't use the output arguments of mt9m114_to_res() are used
correctly:
drivers/staging/media/atomisp/i2c/mt9m114.c: In function 'mt9m114_get_fmt':
drivers/staging/media/atomisp/i2c/mt9m114.c:817:13: error: 'height' may be used uninitialized in this function [-Werror=maybe-uninitialized]
int width, height;
^~~~~~
drivers/staging/media/atomisp/i2c/mt9m114.c: In function 'mt9m114_s_exposure_selection':
drivers/staging/media/atomisp/i2c/mt9m114.c:1179:13: error: 'height' may be used uninitialized in this function [-Werror=maybe-uninitialized]
Without WARN_ON(), there is no problem, so by simply replacing it with
v4l2_err(), the warnings go away. The WARN() output is also not needed
here, as we'd probably catch the problem before even getting here,
and other checks for the same condition already use v4l2_err.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Cox [Wed, 12 Apr 2017 18:22:46 +0000 (19:22 +0100)]
atomisp: remove UDS kernel code
UDS is another layer which actually boils down to some trivial assignments so
remove it so inline the code.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Cox [Wed, 12 Apr 2017 18:22:35 +0000 (19:22 +0100)]
atomisp: remove xnr3_0_5 and xnr3_0_11
These are not used in the driver so can go away.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Cox [Wed, 12 Apr 2017 18:22:25 +0000 (19:22 +0100)]
atomisp: remove fixedbds kernel code
This is a whole pile of code that wraps a single assignment. Remove it and
put the assignment in the caller. Once we have the kernels sorted we should
revisit these and remove all the pointless 1 item structs that go with it.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Cox [Wed, 12 Apr 2017 18:22:13 +0000 (19:22 +0100)]
atomisp: remove satm kernel
This isn't used so it can go in the bitbucket.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Cox [Wed, 12 Apr 2017 18:21:59 +0000 (19:21 +0100)]
atomisp: remove contiguous handling
The base hmm MMU code doesn't support contiguous allocations (they BUG), so
remove support from them from the higher levels of the heirarchy.
We still need to unwind all these layers but it turns out that some of the init
order stuff is rather sensitive and the simple cleanup breaks everything
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Cox [Wed, 12 Apr 2017 18:21:44 +0000 (19:21 +0100)]
atomisp: remove sh_css_malloc indirections where we can
Where we know the buffer size is reasonably constrained we can just use kmalloc,
and where it will be large vmalloc. This still leaves a pile in the middle.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Cox [Wed, 12 Apr 2017 18:21:33 +0000 (19:21 +0100)]
atomisp: remove indirection from sh_css_malloc
We have one hard coded set of behaviour so unpick the indirection and function
pointers. This isn't the whole story. A lot of the callers are known sizes and
use cases so we can switch them directly to kmalloc later on.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Cox [Wed, 12 Apr 2017 18:21:22 +0000 (19:21 +0100)]
atomisp: unwrap the _ex malloc/free functions
We are not using these for debugging or debug logging so remove the defines,
trim and rename the functions.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Cox [Wed, 12 Apr 2017 18:21:05 +0000 (19:21 +0100)]
atomisp: remove most of the uses of atomisp_kernel_malloc
They can be replaced by kmalloc. There are a few that do need to pick kmalloc
or vmalloc. Those we leave for the moment.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daeseok Youn [Wed, 12 Apr 2017 18:20:49 +0000 (19:20 +0100)]
staging: atomisp: move mipi_info assignment to next line in __get_asd_from_port()
The line which is initializing mipi_info variable is too long
to read. It would be placed in next line.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daeseok Youn [Wed, 12 Apr 2017 18:20:36 +0000 (19:20 +0100)]
staging: atomisp: replace "&isp->asd[i]" with "asd" in __get_asd_from_port()
The address of isp->asd[i] is already assigned to
local "asd" variable. "&isp->asd[i]" would be replaced with
just "asd".
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daeseok Youn [Wed, 12 Apr 2017 18:20:22 +0000 (19:20 +0100)]
staging: atomisp: remove enable_isp_irq function and add disable_isp_irq
Enable/Disable ISP irq is switched with "enable" parameter of
enable_isp_irq(). It would be better splited to two such as
enable_isp_irq()/disable_isp_irq().
But the enable_isp_irq() is no use in atomisp_cmd.c file.
So remove the enable_isp_irq() function and add
disable_isp_irq function only.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Wed, 12 Apr 2017 18:20:10 +0000 (19:20 +0100)]
staging/atomisp: fix spelling mistake: "falied" -> "failed"
trivial fix to spelling mistake in dev_err error message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daeseok Youn [Wed, 12 Apr 2017 18:20:01 +0000 (19:20 +0100)]
staging: atomisp: use local variable to reduce number of references
Define new local variable to reduce the number of reference.
The new local variable is added to save the addess of dfs
and used in atomisp_freq_scaling() function.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 10 Apr 2017 03:16:01 +0000 (13:16 +1000)]
staging: ks7010: move check and break to top of loop
Function uses an if statement within a for loop to guard a block of
code. If 'if' statement conditional evaluates to false, loop breaks. The
same logic can be expressed by inverting the conditional and breaking
when new conditional evaluates to true. This allows the subsequent code
to be indented one level less, aiding readability. Reduced indentation
also allows for the code to be laid out more clearly and fixes two
checkpatch warnings.
Invert if statement conditional, break from for loop if new
conditional evaluates to true. Reduce indentation in subsequent code,
fix whitespace issues. Do not change program logic.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 10 Apr 2017 03:16:00 +0000 (13:16 +1000)]
staging: ks7010: remove multi-way decision
Function uses multi-way decision for control flow. Final statement of
function is spin_unlock(). Code can be simplified by adding a goto label
labelling the call to spin_unlock() and jumping to label instead of
using multi-way decision. This allows the code to be indented one
level less which adds to the readability.
Add goto label. Remove multi-way decision by jumping to label. Reduce
indentation in subsequent code. Do not change program logic.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 10 Apr 2017 03:15:59 +0000 (13:15 +1000)]
staging: ks7010: remove unused macro
Macro CHECK_ALINE is defined and never used.
Remove unused macro.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 10 Apr 2017 03:15:58 +0000 (13:15 +1000)]
staging: ks7010: fix checkpatch MULTILINE_DEREFERENCE
Checkpatch emits WARNING: Avoid multiple line dereference.
Fix up layout of function call, move dereference to single line.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 10 Apr 2017 03:15:57 +0000 (13:15 +1000)]
staging: ks7010: fix checkpatch LOGICAL_CONTINUATIONS
Checkpatch emits multiple CHECK: Logical continuations should be on the
previous line.
Move logical continuations to the end of the previous line.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 10 Apr 2017 03:15:56 +0000 (13:15 +1000)]
staging: ks7010: rename identifier packet to skb
Kernel networking code predominately uses the identifier 'skb' for a struct
sk_buff pointer. Of 8088 instances of 'struct sk_buff *' within
net/ 6670 are named 'skb'. Following the principle of least surprise,
new networking code should use the identifier 'skb' for variables of
type 'struct sk_buff *'.
Rename identifier 'packet' to 'skb'.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 10 Apr 2017 03:15:55 +0000 (13:15 +1000)]
staging: ks7010: add task to TODO file
Driver uses custom Michael MIC implementation. There is already an
implementation within the kernel. There is at least one other driver
already using the kernel implementation
(drivers/net/wireless/intersil/orinoco).
Add task to TODO file.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 10 Apr 2017 03:15:54 +0000 (13:15 +1000)]
staging: ks7010: rename RecvMIC to recv_mic
Identifier uses camel case, standard kernel style does not use camel
case.
Rename buffer 'RecvMIC' to 'recv_mic'.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 10 Apr 2017 03:15:53 +0000 (13:15 +1000)]
staging: ks7010: fix checkpatch UNNECESSARY_ELSE
Checkpatch emits WARNING: else is not generally useful after a break
or return. Two warnings of this type are emitted for this code block,
in both cases 'else' statements are unnecessary.
Remove unnecessary 'else' statements, reduce indentation in subsequent
code.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 10 Apr 2017 03:15:52 +0000 (13:15 +1000)]
staging: ks7010: fix checkpatch PARENTHESIS_ALIGNMENT
Checkpatch emits CHECK: Alignment should match open parenthesis.
Align argument to open parenthesis.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 10 Apr 2017 03:15:51 +0000 (13:15 +1000)]
staging: ks7010: utilize local variable
Function contains a local pointer variable defined to a memory location
within a structure. This memory location is later used by
dereferencing the struct instead of using the local pointer. The code
is cleaner if all references of the same memory location use the
local variable.
Utilize existing local pointer variable instead of dereferencing
struct.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>