OSDN Git Service
Amber Lin [Tue, 27 Feb 2018 15:01:59 +0000 (10:01 -0500)]
drm/amdgpu: Map all visible VRAM at startup
When using CPU to update page table, we need to kmap all the PDs/PTs after
they are allocated and that requires a TLB shot down on each CPU, which is
quite heavy.
Instead, we map the whole visible VRAM to a kernel address at once. Pages
can be obtained from the offset.
v2: move the mapping base from gmc to amdgpu_mman structure, and the
implementation in amdgpu_ttm_* functions
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shirish S [Wed, 21 Feb 2018 10:40:33 +0000 (16:10 +0530)]
drm/amd/display: check for ipp before calling cursor operations
Currently all cursor related functions are made to all
pipes that are attached to a particular stream.
This is not applicable to pipes that do not have cursor plane
initialised like underlay.
Hence this patch allows cursor related operations on a pipe
only if ipp in available on that particular pipe.
The check is added to set_cursor_position & set_cursor_attribute.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Shirish S [Fri, 23 Feb 2018 10:40:13 +0000 (16:10 +0530)]
drm/amd/display: make dm_dp_aux_transfer return payload bytes instead of size
The drm layer expects aux->transfer() to return the payload bytes read.
Currently dm_dp_aux_transfer() returns the payload size which does not
gets updated during the read, hence not giving the right data for the
drm layer to pars edid. This leads to the drm layer to conclude as the
edid is BAD and hence some monitors/devices dont get detected properly.
This patch changes the return type of dm_dp_aux_transfer() to actual
bytes read during DP_AUX_NATIVE_READ & DP_AUX_I2C_READ.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Mon, 29 Jan 2018 11:24:32 +0000 (19:24 +0800)]
drm/amdgpu: disable GFX ring and disable PQ wptr in hw_fini
otherwise there will be DMAR reading error comes out from CP since
GFX is still alive and CPC's WPTR_POLL is still enabled, which would
lead to DMAR read error.
fix:
we can hault CPG after hw_fini, but cannot halt CPC becaues KIQ
stil need to be alive to let RLCV invoke, but its WPTR_POLL could
be disabled.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Fri, 26 Jan 2018 08:57:25 +0000 (16:57 +0800)]
drm/amdgpu: cleanup SA inti and fini(v2)
should use bo_create_kernel instead of split to two
function that create and pin the SA bo
issue:
before this patch, there are DMAR read error in host
side when running SRIOV test, the DMAR address dropped
in the range of SA bo.
fix:
after this cleanups of SA init and fini, above DMAR
eror gone.
v2:
keep sa_bo's fini instead of suspend, to keep
reporting error
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Emily Deng [Wed, 7 Feb 2018 08:17:16 +0000 (16:17 +0800)]
drm/amdgpu: Correct sdma_v4 get_wptr(v2)
the original method will change the wptr value in wb.
v2:
furthur cleanup
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Tue, 23 Jan 2018 10:26:20 +0000 (18:26 +0800)]
drm/amdgpu: adjust timeout for ib_ring_tests(v2)
issue:
sometime GFX/MM ib test hit timeout under SRIOV env, root cause
is that engine doesn't come back soon enough so the current
IB test considered as timed out.
fix:
for SRIOV GFX IB test wait time need to be expanded a lot during
SRIOV runtimei mode since it couldn't really begin before GFX engine
come back.
for SRIOV MM IB test it always need more time since MM scheduling
is not go together with GFX engine, it is controled by h/w MM
scheduler so no matter runtime or exclusive mode MM IB test
always need more time.
v2:
use ring type instead of idx to judge
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Fri, 19 Jan 2018 12:29:17 +0000 (20:29 +0800)]
drm/amdgpu: don't use MM idle_work for SRIOV(v2)
SRIOV doesn't give VF cg/pg feature so the MM's idle_work
is skipped for SR-IOV
v2:
remove superfluous changes
since idle_work is not scheduled for SR-IOV so the condition
check for SR-IOV inside idle_work also can be dropped
v3:
drop the SRIOV check in amdgpu_vce/uvd_suspend
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Sat, 24 Feb 2018 06:29:12 +0000 (14:29 +0800)]
drm/amd/pp: Print more smu failed info on Vega10
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Mon, 26 Feb 2018 22:36:19 +0000 (17:36 -0500)]
drm/amd/powerplay: fix power over limit on Fiji
power containment disabled only on Fiji and compute
power profile. It violates PCIe spec and may cause power
supply failed. Enabling it will fix the issue, even the
fix will drop performance of some compute tests.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
James Zhu [Tue, 27 Feb 2018 14:55:17 +0000 (09:55 -0500)]
drm/amdgpu:Fixed wrong emit frame size for enc
Emit frame size should match with corresponding function,
uvd_v6_0_enc_ring_emit_vm_flush has 5 amdgpu_ring_write
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Tue, 23 Jan 2018 11:17:56 +0000 (19:17 +0800)]
drm/amdgpu: increase gart size to 512MB
256MB is too small consider PTE/PDE shadow and TTM
eviction activity
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Wed, 24 Jan 2018 04:20:32 +0000 (12:20 +0800)]
drm/amdgpu: move WB_FREE to correct place
WB_FREE should be put after all engines's hw_fini
done, otherwise the invalid wptr/rptr_addr would still
be used by engines which trigger abnormal bugs.
This fixes couple DMAR reading error in host side for SRIOV
after guest kmd is unloaded.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Tue, 23 Jan 2018 10:29:22 +0000 (18:29 +0800)]
drm/amdgpu: change gfx9 ib test to use WB
two reasons to switch SCRATCH reg method to WB method:
1)Because when doing IB test we don't want to involve KIQ health
status affect, and since SCRATCH register access is go through
KIQ that way GFX IB test would failed due to KIQ fail.
2)acccessing SCRATCH register cost much more time than WB method
because SCRATCH register access runs through KIQ which at least could
begin after GPU world switch back to current Guest VF
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Fri, 19 Jan 2018 11:06:31 +0000 (19:06 +0800)]
drm/amdgpu: cond_exec only for schedule with a job
issue:
under SR-IOV sometimes the iB test will fail on
gfx ring
fix:
with cond_exec inserted in RB the gfx engine would
skip part packets if RLCV issue PREEMPT on gfx engine
if gfx engine is prior to COND_EXEC packet, this is
okay for regular command from UMD, but for the ib test
since the whole dma format doesn't support PREEMPT
so must remove the COND_EXEC from it.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Fri, 19 Jan 2018 11:02:16 +0000 (19:02 +0800)]
drm/amdgpu: only flush hotplug work without DC
since hotplug_work is initialized under the case of
no dc support
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Thu, 18 Jan 2018 08:58:04 +0000 (16:58 +0800)]
drm/amdgpu: skip ECC for SRIOV in gmc late_init
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Fri, 29 Dec 2017 09:06:41 +0000 (17:06 +0800)]
drm/amdgpu: fix&cleanups for wb_clear
fix:
should do right shift on wb before clearing
cleanups:
1,should memset all wb buffer
2,set max wb number to 128 (total 4KB) is big enough
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 26 Feb 2018 18:34:13 +0000 (13:34 -0500)]
drm/amdgpu/powerplay/smu7: use proper dep table for mclk
For mclk od, use the vdd dependency on mclk table. Looks
like a cut and paste typo.
Reviewed-by: Rex Zhu<rezhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Mon, 26 Feb 2018 14:09:26 +0000 (09:09 -0500)]
drm/amd/amdgpu: Correct VRAM width for APUs with GMC9
DDR4 has a 64-bit width not 128-bits. It was reporting
twice the width. Tested with my Ryzen 2400G.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 22 Feb 2018 07:54:57 +0000 (08:54 +0100)]
drm/ttm: cleanup ttm_tt_create
Cleanup ttm_tt_create a bit.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 22 Feb 2018 07:54:57 +0000 (08:54 +0100)]
drm/ttm: move ttm_tt_create into ttm_tt.c v2
Rename ttm_bo_add_ttm to ttm_tt_create and move it into ttm_tt.c.
v2: separate the cleanup.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roger He [Mon, 5 Feb 2018 09:57:07 +0000 (17:57 +0800)]
drm/ttm: check if free mem space is under the lower limit
the free mem space and the lower limit both include two parts:
system memory and swap space.
For the OOM triggered by TTM, that is the case as below:
first swap space is full of swapped out pages and soon
system memory also is filled up with ttm pages. and then
any memory allocation request will run into OOM.
to cover two cases:
a. if no swap disk at all or free swap space is under swap mem
limit but available system mem is bigger than sys mem limit,
allow TTM allocation;
b. if the available system mem is less than sys mem limit but
free swap space is bigger than swap mem limit, allow TTM
allocation.
v2: merge two memory limit(swap and system) into one
v3: keep original behavior except ttm_opt_ctx->flags with
TTM_OPT_FLAG_FORCE_ALLOC
v4: always set force_alloc as tx->flags & TTM_OPT_FLAG_FORCE_ALLOC
v5: add an attribute for lower_mem_limit
v6: set lower_mem_limit as 0 to keep original behavior
Signed-off-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 22 Feb 2018 14:52:31 +0000 (15:52 +0100)]
drm/ttm: drop persistent_swap_storage from ttm_bo_init and co
Never used as parameter, the only driver actually using this is nouveau
and there it is initialized after the BO is initialized.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 21 Feb 2018 19:34:13 +0000 (20:34 +0100)]
drm/ttm: drop ttm->dummy_read_page
Only used by the AGP backend and there it can be easily accessed using
ttm->bdev->glob.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 21 Feb 2018 18:02:06 +0000 (19:02 +0100)]
drm/ttm: drop ttm->glob
The pointer is available as ttm->bdev->glob as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 21 Feb 2018 16:26:45 +0000 (17:26 +0100)]
drm/ttm: drop bo->glob
The pointer is available as bo->bdev->glob as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 22 Feb 2018 13:53:42 +0000 (14:53 +0100)]
staging: vboxvideo: remove ttm_pool_* wrappers
TTM calls the default implementation now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 22 Feb 2018 11:12:41 +0000 (12:12 +0100)]
drm/bochs: remove the default ttm_tt_populate callbacks
TTM calls the default implementation now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 22 Feb 2018 11:11:25 +0000 (12:11 +0100)]
drm/cirrus: remove ttm_pool_* wrappers
TTM calls the default implementation now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 22 Feb 2018 11:06:59 +0000 (12:06 +0100)]
drm/qxl: remove ttm_pool_* wrappers
TTM calls the default implementation now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 22 Feb 2018 11:05:09 +0000 (12:05 +0100)]
drm/ast: remove ttm_pool_* wrappers
TTM calls the default implementation now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 22 Feb 2018 11:03:58 +0000 (12:03 +0100)]
drm/hisilicon: remove ttm_pool_* wrappers
TTM calls the default implementation now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 22 Feb 2018 11:02:36 +0000 (12:02 +0100)]
drm/mgag200: remove ttm_pool_* wrappers
TTM calls the default implementation now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 22 Feb 2018 11:01:38 +0000 (12:01 +0100)]
drm/virtio: remove ttm_pool_* wrappers
TTM calls the default implementation now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 22 Feb 2018 11:00:05 +0000 (12:00 +0100)]
drm/ttm: add default implementations for ttm_tt_(un)populate
Use ttm_pool_populate/ttm_pool_unpopulate if the driver doesn't provide
a function.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Thu, 22 Feb 2018 12:46:49 +0000 (20:46 +0800)]
drm/amd/pp: Move common dpm check functions to hardwaremanager.c
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Fri, 23 Feb 2018 05:13:13 +0000 (13:13 +0800)]
drm/amd/pp: Cleaning up vega10_enable_dpm_tasks function
1. move display num initialize out of dpm enable tasks.
2. do not set/restore smc telemetry if dpm is runing.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Thu, 22 Feb 2018 12:27:07 +0000 (20:27 +0800)]
drm/amd/pp: Refine code in powerplay for Cz/Vega10
Add dpm check functions on CZ/Vega10 to smu backend
function table.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Thu, 22 Feb 2018 09:20:53 +0000 (17:20 +0800)]
drm/amd/pp: Remove dead error checking code on Vega10
when smu failed, print out the error info immediately
for debug. smum_send_msg_to_smu always return true,
so no need to check return value.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Thu, 22 Feb 2018 08:50:57 +0000 (16:50 +0800)]
drm/amd/pp: Add debug info when smu failed on Vega10
When smu msssage failed, print out return value in dmesg.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Thu, 22 Feb 2018 08:33:05 +0000 (16:33 +0800)]
drm/amd/pp: Remove duplicated vega10_is_smc_ram_running calls
Avoid conflicts in reading the same register mmPCIE_INDEX2
with other clients
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Corentin Labbe [Thu, 22 Feb 2018 08:21:49 +0000 (08:21 +0000)]
drm/amd: Remove inclusion of non-existing include directories
This patch fix the following build warnings:
CC [M] drivers/gpu/drm/amd/amdgpu/amdgpu_drv.o
cc1: warning: ../display/: No such file or directory [-Wmissing-include-dirs]
cc1: warning: ../display/include: No such file or directory [-Wmissing-include-dirs]
CC [M] drivers/gpu/drm/amd/amdgpu/amdgpu_device.o
cc1: warning: ../display/: No such file or directory [-Wmissing-include-dirs]
cc1: warning: ../display/include: No such file or directory [-Wmissing-include-dirs]
[...]
This warning is shown for each file in amdgpu directory, so it spams a lot.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Corentin Labbe [Thu, 22 Feb 2018 08:21:48 +0000 (08:21 +0000)]
drm/amd: remove inclusion of non-existing scheduler directory
The scheduler directory was removed via commit
1b1f42d8fde4 ("drm: move amd_gpu_scheduler into common location")
Remove it from include path.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ben Crocker [Thu, 22 Feb 2018 22:52:19 +0000 (17:52 -0500)]
drm/radeon: insist on 32-bit DMA for Cedar on PPC64/PPC64LE
In radeon_device_init, set the need_dma32 flag for Cedar chips
(e.g. FirePro 2270). This fixes, or at least works around, a bug
on PowerPC exposed by last year's commits
8e3f1b1d8255105f31556aacf8aeb6071b00d469 (Russell Currey)
and
253fd51e2f533552ae35a0c661705da6c4842c1b (Alistair Popple)
which enabled the 64-bit DMA iommu bypass.
This caused the device to freeze, in some cases unrecoverably, and is
the subject of several bug reports internal to Red Hat.
Signed-off-by: Ben Crocker <bcrocker@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Thierry Reding [Tue, 20 Feb 2018 10:44:50 +0000 (11:44 +0100)]
drm/amdgpu: Remove duplicate setting of ->need_swiotlb
There's no need to set this before the number of DMA bits has been
properly determined.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Thu, 22 Feb 2018 09:45:11 +0000 (17:45 +0800)]
drm/amd/pp: Add a pp feature mask bit for AutoWattman feature
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Thu, 22 Feb 2018 09:39:22 +0000 (17:39 +0800)]
drm/amdgpu: Change default value of module parameter amdgpu_pp_feature_mask
Currently all pp features are enabled by default except
OVERDRIVE
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Thu, 22 Feb 2018 17:00:35 +0000 (12:00 -0500)]
drm/amd/powerplay: fix thermal interrupts on vega10
a bug in programming thermal interrupt register masks out
interrupts and driver cannot receive interrupts. Setting
0 to mask bits will fix it.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Thu, 8 Feb 2018 07:57:10 +0000 (15:57 +0800)]
drm/amdgpu: Add query vram width in CGS query system info
powerplay need vram width to set default mclk optimization
settings(uphyst/downhyst/activity threshold)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 22 Feb 2018 07:35:11 +0000 (08:35 +0100)]
drm/amdgpu: use the TTM dummy page instead of allocating one
We have a global dummy page in TTM, use that one instead of allocating a
new one.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Fri, 9 Feb 2018 08:47:53 +0000 (16:47 +0800)]
drm/amd/pp: Fix bug that dpm level was not really locked
Lock the dpm levels when we use SW method to modify
the dpm tables directly to avoid a possible race
with the smu.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Sun, 11 Feb 2018 04:38:58 +0000 (12:38 +0800)]
drm/amd/pp: Fix error handling when smu return failed on Vega10.
Clamp the clock index to a valid range when reading it back
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roger He [Tue, 6 Feb 2018 07:00:06 +0000 (15:00 +0800)]
drm/ttm: set TTM_OPT_FLAG_FORCE_ALLOC in ttm_bo_force_list_clean
Because ttm_bo_force_list_clean() is only called on two occasions:
1. By ttm_bo_evict_mm() during suspend.
2. By ttm_bo_clean_mm() when the driver unloads.
On both cases we absolutely don't want any memory allocation failure.
Signed-off-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roger He [Wed, 17 Jan 2018 07:07:23 +0000 (15:07 +0800)]
drm/ttm: add bit flag TTM_OPT_FLAG_FORCE_ALLOC
set TTM_OPT_FLAG_FORCE_ALLOC when we are servicing for page
fault routine.
for ttm_mem_global_reserve if in page fault routine, allow the gtt
pages reservation always. because page fault routing already grabbed
system memory and the allowance of this exception is harmless.
Otherwise, it will trigger OOM killer.
will be used later.
v2: set the FORCE_ALLOC always
v3: minor refine
Signed-off-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roger He [Tue, 6 Feb 2018 03:22:57 +0000 (11:22 +0800)]
drm/ttm: use bit flag to replace allow_reserved_eviction in ttm_operation_ctx
for saving memory and more bit flag can be used in future
Signed-off-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Arnd Bergmann [Fri, 16 Feb 2018 15:26:57 +0000 (16:26 +0100)]
radeon: hide pointless #warning when compile testing
In randconfig testing, we sometimes get this warning:
drivers/gpu/drm/radeon/radeon_object.c: In function 'radeon_bo_create':
drivers/gpu/drm/radeon/radeon_object.c:242:2: error: #warning Please enable CONFIG_MTRR and CONFIG_X86_PAT for better performance thanks to write-combining [-Werror=cpp]
#warning Please enable CONFIG_MTRR and CONFIG_X86_PAT for better performance \
This is rather annoying since almost all other code produces no build-time
output unless we have found a real bug. We already fixed this in the
amdgpu driver in commit
31bb90f1cd08 ("drm/amdgpu: shut up #warning for
compile testing") by adding a CONFIG_COMPILE_TEST check last year and
agreed to do the same here, but both Michel and I then forgot about it
until I came across the issue again now.
For stable kernels, as this is one of very few remaining randconfig
warnings in 4.14.
Cc: stable@vger.kernel.org
Link: https://patchwork.kernel.org/patch/9550009/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 1 Feb 2018 13:52:50 +0000 (14:52 +0100)]
drm/ttm: set page mapping during allocation
To aid debugging set the page mapping during allocation instead of
during VM faults.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 15 Feb 2018 13:40:30 +0000 (08:40 -0500)]
Revert "drm/radeon/pm: autoswitch power state when in balanced mode"
This reverts commit
1c331f75aa6ccbf64ebcc5a019183e617c9d818a.
Breaks resume on some systems.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=100759
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Christian König [Fri, 16 Feb 2018 09:08:24 +0000 (10:08 +0100)]
drm/radeon: use drm_gem_private_object_init
We use our own backing store and don't need the shmem file.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 16 Feb 2018 08:52:51 +0000 (09:52 +0100)]
drm/amdgpu: use drm_gem_private_object_init
We use our own backing store and don't need the shmem file.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 19 Feb 2018 10:29:35 +0000 (11:29 +0100)]
drm/amdgpu: mitigate workaround for i915
To be able to use DRI_PRIME with amdgpu and i915 we add all our fences
only as exclusive ones.
Disable that behavior when sharing between amdgpu itself cause it
hinders concurrent execution.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 16 Feb 2018 12:16:11 +0000 (13:16 +0100)]
drm/amdgpu: implement amdgpu_gem_map_(attach/detach)
Instead of the pin/unpin callback implement the attach/detach ones.
Functional identical, but allows us access to the attachment.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 13 Feb 2018 19:37:36 +0000 (14:37 -0500)]
drm/amdgpu/powerplay/smu7: drop refresh rate checks for mclk switching
The logic has moved to cgs. mclk switching with DC at higher refresh
rates should work.
Reviewed-by: Eric Huang <JinhuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Alex Deucher [Tue, 13 Feb 2018 19:33:51 +0000 (14:33 -0500)]
drm/amdgpu/cgs: add refresh rate checking to non-DC display code
Clamp the vblank period to 0 if the refresh rate is larger than
120 hz for non-DC. This allows us to remove the refresh rate
checks from powerplay for mclk switching.
Reviewed-by: Eric Huang <JinhuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 13 Feb 2018 19:26:54 +0000 (14:26 -0500)]
drm/amd/powerplay/smu7: allow mclk switching with no displays
If there are no displays attached, there is no reason to disable
mclk switching.
Fixes mclks getting set to high when there are no displays attached.
Reviewed-by: Eric Huang <JinhuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Alex Deucher [Tue, 13 Feb 2018 19:25:11 +0000 (14:25 -0500)]
drm/amd/powerplay/vega10: allow mclk switching with no displays
If there are no displays attached, there is no reason to disable
mclk switching.
Fixes mclks getting set to high when there are no displays attached.
Reviewed-by: Eric Huang <JinhuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Alex Deucher [Tue, 13 Feb 2018 19:22:46 +0000 (14:22 -0500)]
drm/amd/powerplay: use PP_CAP macro for disable_mclk_switching_for_frame_lock
Rather than open coding it.
Reviewed-by: Eric Huang <JinhuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Corentin Labbe [Wed, 14 Feb 2018 14:46:17 +0000 (14:46 +0000)]
drm/amd/powerplay: remove unused headers
All thoses headers are not used by any source files.
Lets just remove them.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Gustavo A. R. Silva [Thu, 15 Feb 2018 05:20:00 +0000 (23:20 -0600)]
drm/amdgpu_gem: fix error handling path in amdgpu_gem_va_update_vm
Currently, if amdgpu_vm_bo_update() fails, the returned error
is being ignored.
Fix this by properly checking _r_ after calling amdgpu_vm_bo_update.
Also, remove redundant code just before label _error_.
Addresses-Coverity-ID:
1464280 ("Unused value")
Fixes:
0abc6878fc2d ("drm/amdgpu: update VM PDs after the PTs")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 5 Feb 2018 16:38:01 +0000 (17:38 +0100)]
drm/amdgpu: update the PASID mapping only on demand
Updating the PASID is rather heavyweight and shouldn't be done all the
time.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Sun, 4 Feb 2018 09:32:35 +0000 (10:32 +0100)]
drm/amdgpu: separate PASID mapping from VM flush v2
Stuffing the PASID mapping into the VM flush isn't flexible enough since
the PASID mapping changes not as often as we need a VM flush.
v2: add missing use of gmc_v7_0_emit_pasid_mapping
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo (Sunpeng) Li [Fri, 9 Feb 2018 17:51:01 +0000 (12:51 -0500)]
drm/amd/display: Fix increment when sampling OTF in DCE
Previously, the number of software segmets per region was reduced to 16.
This needs to be reflected in the sampling distance (increment) used when
translating to the hardware format.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Vitaly Prosyak [Tue, 6 Feb 2018 21:06:23 +0000 (15:06 -0600)]
drm/amd/display: De PQ implementation
Some refactoring and optimizations in color module.
Added de gamma 2.2 & 2.4, also re gamma 2.2.
Added interface for diagnostic for de gamma & de pq.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Mon, 5 Feb 2018 23:41:45 +0000 (18:41 -0500)]
drm/amd/display: Remove unused dm_pp_ interfaces
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Yang [Tue, 6 Feb 2018 22:28:46 +0000 (17:28 -0500)]
drm/amd/display: Add logging for aux DPCD access
Add basic logging for DPCD access. Does not print
by default.
Currently only prints first byte of the data accessed.
Technical debt: Need to make it so that the entire
data block accessed is printed. Also need to log
address space that's not DPCD.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tao [Thu, 8 Feb 2018 21:04:25 +0000 (16:04 -0500)]
drm/amd/display: Set vsc pack revision when DPCD revision is >= 1.2
Brightness couldn't change when booting up in DC mode.
It was because "psr_enabled" flag was not set to true before
setting vsc packet revision, causing packet rev setup was skipped.
Now instead of checking the psr flag, it checks if the DPCD_REV >= 1.2
and set the vsc packet revision.
Signed-off-by: Tao <xtao@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Thu, 8 Feb 2018 04:25:43 +0000 (23:25 -0500)]
drm/amd/display: provide an interface to query firmware version
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Thu, 1 Feb 2018 16:29:58 +0000 (11:29 -0500)]
drm/amd/display: Add missing Vega defines to dal_asic_id
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Yang [Thu, 8 Feb 2018 19:05:14 +0000 (14:05 -0500)]
drm/amd/display: Treat bad EDID as no EDID
We have an mst dock firmware that will emulate an EDID with bad
checksum.
v2: Tread -> Treat
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ken Chalmers [Wed, 7 Feb 2018 19:58:53 +0000 (14:58 -0500)]
drm/amd/display: Remove duplicate entries from BIOS function table
Identical to the two entries above them.
Signed-off-by: Ken Chalmers <ken.chalmers@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Tue, 6 Feb 2018 23:47:26 +0000 (18:47 -0500)]
drm/amd/display: Make FBC work without fbdev emulation
Previously, FBC dynamic allocation relied on connector modes
populated during dm init. This is only the case if
DRM_FBDEV_EMULATION config flag is enabled.
Moving fbc allocation from dm_late_init() to
amdgpu_dm_connector_get_modes() where actual modes init happens.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Shirish Shankarappa <Shirish.S@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Barberiz [Tue, 6 Feb 2018 17:25:17 +0000 (12:25 -0500)]
drm/amd/display: Remove delay on disconnect patch
HDMI HPD's generic solution makes the monitor
patch code unnecessary so anything related has
been removed.
Signed-off-by: John Barberiz <jbarberi@amd.com>
Reviewed-by: John Barberiz <jbarberi@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo (Sunpeng) Li [Tue, 6 Feb 2018 15:20:46 +0000 (10:20 -0500)]
drm/amd/display: Skip 2 frames when first reading CRC
Skipping the first frame will prevent uncoooked values most of the time.
However, in some unlikely cases, the second frame will be uncooked as
well.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo (Sunpeng) Li [Mon, 5 Feb 2018 21:11:19 +0000 (16:11 -0500)]
drm/amd/display: Expose DCE110 CRC functions for DCE8
Implement CRC for DCE8. Registers remain the same, so call DCE110 code
directly.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo (Sunpeng) Li [Tue, 6 Feb 2018 21:35:21 +0000 (16:35 -0500)]
drm/amd/display: Rework DCE transform bit depth reduction programming.
Clear up the logic, and enable programming truncation as a bit reduction
mode.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo (Sunpeng) Li [Tue, 23 Jan 2018 22:43:37 +0000 (17:43 -0500)]
drm/amd/display: When enabling CRC, disable dither & enable truncation
When user-mode is using 8bpc, the hardware represents it internally
using a higher bit depth. This causes problems when comparing CRCs for
color managment tests.
We need to disable dithering as well, since it makes CRC values
non-deterministic.
It's easy to see why dithering needs to be disabled, The reason why
truncation also needs to be enabled is better described with an example.
Consider the folowing which tests the color transform matrix (CTM):
Expected CRC = FB_A -> Degamma (Bypassed) -> CTM (Bypassed)
|
v
Obtain CRC <- Regamma(Bypassed)
Actual CRC = FB_B -> Degamma (Bypassed) -> CTM (0.5*Identity)
|
v
Obtain CRC <- Regamma(Bypassed)
FB_A contains a solid red color at half intensity (127 @ 8bpc)
FB_B contains a solid red color at full intensity (255 @ 8bpc)
We expect that Expected CRC = Actual CRC, but that's not the case. When
the CTM is applied, the output is at half intensity, but also at a
higher bit depth within hardware. i.e. 255/2 = 127.5: not representable
in 8bpc, but can be at 10bpc. This causes the two CRC's to be different.
The solution is to truncate the output bit depth to the same as input
when enabling CRC capture. Since Linux only supports 8bpc, hard code
that for now.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo (Sunpeng) Li [Tue, 6 Feb 2018 14:50:49 +0000 (09:50 -0500)]
drm/amd/display: Expose dither setting functionality to Linux
We will need this to disable dither for CRC capture.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo (Sunpeng) Li [Tue, 30 Jan 2018 16:14:27 +0000 (11:14 -0500)]
drm/amd/display: Refactor max color lut entries into a macro.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo (Sunpeng) Li [Fri, 2 Feb 2018 15:18:56 +0000 (10:18 -0500)]
drm/amd/display: Hookup color management functions
Hookup new color management functions into amdgpu_dm:
- Notify DRM that we support CRTC color management during CRTC init
- Call color management functions within atomic check to update dc
states in preparation for a commit
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo (Sunpeng) Li [Fri, 2 Feb 2018 15:18:05 +0000 (10:18 -0500)]
drm/amd/display: Implement color management
Implement color management functionalities within amdgpu_dm_color, and
expose functions within amdgpu_dm.h.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo (Sunpeng) Li [Mon, 5 Feb 2018 19:29:57 +0000 (14:29 -0500)]
drm/amd/display: Add color module's gamma helpers to Linux build
Also guard includes that we don't need.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo (Sunpeng) Li [Fri, 2 Feb 2018 14:46:41 +0000 (09:46 -0500)]
drm/amd/display: Use hardware max low point when sampling OTF
The MAX_LOW_POINT macro should reflect the maximum low point within
hardware. Otherwise, sampling for the hardware points from the output
transfer function (OTF) will be incorrect.
Also, fix usage of MAX_LOW_POINT accordingly.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Wed, 24 Jan 2018 16:23:28 +0000 (11:23 -0500)]
drm/amd/display: Make couple functions in DCE80 TG static
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Wed, 24 Jan 2018 16:16:49 +0000 (11:16 -0500)]
drm/amd/display: Re-use DCE100 display_power_gating for DCE80
Both functions are the same
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Wed, 24 Jan 2018 15:47:37 +0000 (10:47 -0500)]
drm/amd/display: Remove unused DCE80 compressor
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yongqiang Sun [Fri, 2 Feb 2018 22:35:00 +0000 (17:35 -0500)]
drm/amd/display: Keep eDP stream enabled during boot.
This path fixed specific eDP panel cold boot black screen
due to unnecessary enable link.
Change:
In case of boot up with eDP, if OS is going to set mode
on eDP, keep eDP light up, do not disable and reset corresponding
HW.
This change may affect dce asics and S3/S4 Resume with multi-monitor.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tony Cheng [Fri, 2 Feb 2018 06:16:47 +0000 (01:16 -0500)]
drm/amd/display: dal 3.1.34
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dmytro Laktyushkin [Mon, 29 Jan 2018 21:34:16 +0000 (16:34 -0500)]
drm/amd/display: disable seamless vp adjustment for mirrored surface
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Martin Tsai [Thu, 1 Feb 2018 12:03:17 +0000 (20:03 +0800)]
drm/amd/display: add monitor patch for delay after DP receive power up
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>