OSDN Git Service
Rob Clark [Mon, 2 Feb 2015 17:54:25 +0000 (12:54 -0500)]
freedreno/ir3: helpful iterator macros
I remembered that we are using c99.. which makes some sugary iterator
macros easier. So introduce iterator macros to iterate all src
registers and all SSA src instructions. The _n variants also return
the src #, since there are a handful of places that need this.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Rob Clark [Sun, 1 Feb 2015 18:04:09 +0000 (13:04 -0500)]
freedreno/ir3: fix register usage calculations
For cat1 instructions, use reg() as well for relative src, to ensure
proper accounting of register usage. Also, for relative instructions,
use reg->size rather than reg->wrmask to determine the number of
components read/written.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Rob Clark [Tue, 3 Feb 2015 20:53:35 +0000 (15:53 -0500)]
freedreno/ir3: couple tweaks for cmdline compiler
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Rob Clark [Fri, 23 Jan 2015 20:03:51 +0000 (15:03 -0500)]
freedreno/ir3: split up ssa_dst
And a couple other trivial renames, to prepare for relative dst.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Rob Clark [Tue, 10 Feb 2015 09:42:32 +0000 (04:42 -0500)]
freedreno/ir3: fix failed assert in grouping
Turns out there are scenarios where we need to insert mov's in "front"
of an input. Triggered by shaders like:
VERT
DCL IN[0]
DCL IN[1]
DCL OUT[0], POSITION
DCL OUT[1], GENERIC[9]
DCL SAMP[0]
DCL TEMP[0], LOCAL
0: MOV TEMP[0].xy, IN[1].xyyy
1: MOV TEMP[0].w, IN[1].wwww
2: TXF TEMP[0], TEMP[0], SAMP[0], 1D_ARRAY
3: MOV OUT[1], TEMP[0]
4: MOV OUT[0], IN[0]
5: END
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Jon TURNEY [Thu, 5 Mar 2015 15:29:32 +0000 (15:29 +0000)]
c99_alloca.h: Also use <alloca.h> for cygwin
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Brian Paul <brianp@vmware.com>
Vinson Lee [Wed, 4 Mar 2015 02:54:48 +0000 (18:54 -0800)]
i915: Fix GCC unused-variable warning in release build.
i915_debug_fp.c: In function ‘i915_disassemble_program’:
i915_debug_fp.c:302:11: warning: unused variable ‘size’ [-Wunused-variable]
GLuint size = program[0] & 0x1ff;
^
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>
Mark Janes [Fri, 6 Mar 2015 21:36:55 +0000 (13:36 -0800)]
r300g: Fix build, invalid extern "C" around header inclusion.
A previous patch to fix header inclusion within extern "C" neglected
to fix the occurences of this pattern in r300 files.
When the helper to detect this issue was pushed to master, it broke
the build for the r300 driver. This patch fixes the r300 build.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89477
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Mark Janes [Fri, 6 Mar 2015 21:36:54 +0000 (13:36 -0800)]
nouveau: Fix build, invalid extern "C" around header inclusion.
A previous patch to fix header inclusion within extern "C" neglected
to fix the occurences of this pattern in nouveau files.
When the helper to detect this issue was pushed to master, it broke
the build for the nouveau driver. This patch fixes the nouveau build.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89477
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Ilia Mirkin [Thu, 5 Mar 2015 17:09:21 +0000 (12:09 -0500)]
nv50,nvc0: remove bogus 64_FLOAT formats
There is no HW support for these and the VBO pusher doesn't know about
them. No need to, either, since the st will be lowering them to 2x32.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Emil Velikov [Sat, 7 Mar 2015 00:33:06 +0000 (00:33 +0000)]
docs: add news item and link release notes for mesa 10.4.6/10.5.0
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Emil Velikov [Fri, 6 Mar 2015 23:58:47 +0000 (23:58 +0000)]
docs: Add sha256 sums for the 10.5.0 release
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit
0d3e4ed1349565dea8e6c5139400d7441b8ffdca)
Emil Velikov [Fri, 6 Mar 2015 22:55:59 +0000 (22:55 +0000)]
docs: Update 10.5.0 release notes
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit
97357d475fc8cbb5dbe7bf17ca41f535827fb253)
Emil Velikov [Fri, 6 Mar 2015 19:44:55 +0000 (19:44 +0000)]
docs: Add sha256 sums for the 10.4.6 release
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit
fc9dd495b2adbd329d6b58cd611d2acd8ac3070a)
Emil Velikov [Fri, 6 Mar 2015 19:23:34 +0000 (19:23 +0000)]
Add release notes for the 10.4.6 release
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit
542a754524a2b149c178a2f70c05b292c7228fc2)
Chia-I Wu [Fri, 6 Mar 2015 19:41:55 +0000 (12:41 -0700)]
ilo: clarify valid and preferred tilings
We did it right until the switch to gen_surface_tiling, which has
GEN8_TILING_W. Generally, GEN8_TILING_W may be valid but not preferred.
Chia-I Wu [Fri, 6 Mar 2015 17:55:15 +0000 (01:55 +0800)]
ilo: clean up Gen6 WAs
Add a help function for each WA and make PIPE_CONTROL flags match the WA
descriptions. Call gen6_wa_pre_pipe_contro() only before PIPE_CONTROLs.
Fix missing gen6_wa_pre_3dstate_vs_toggle() in the rectlist path.
Chia-I Wu [Fri, 6 Mar 2015 17:44:33 +0000 (01:44 +0800)]
ilo: add generic ilo_render_3dprimitive()
It replaces gen[6-8]_3dprimitive().
Chia-I Wu [Fri, 6 Mar 2015 17:16:47 +0000 (01:16 +0800)]
ilo: add generic ilo_render_pipe_control()
It replaces gen[6-8]_pipe_control() and a direct gen6_PIPE_CONTROL() call in
ilo_render_emit_flush().
Chia-I Wu [Fri, 6 Mar 2015 07:10:45 +0000 (15:10 +0800)]
ilo: fix padding of linear sampler views
Should use the temporary variable in the loop instead of layout->bo_height.
Chia-I Wu [Fri, 6 Mar 2015 07:04:47 +0000 (15:04 +0800)]
ilo: do not check for interleaved_samples
interleaved_samples is only zero-initialized when layout_want_mcs() is called.
We should not check for it. There is also no need to.
Emil Velikov [Fri, 6 Mar 2015 17:07:40 +0000 (17:07 +0000)]
Revert "egl/main: use c11/threads' mutex directly"
This reverts commit
6cee785c69a5c8d2d32b6807f9c502117f5a74b0.
Not meant to go in yet. Lacking review.
Emil Velikov [Fri, 6 Mar 2015 17:07:34 +0000 (17:07 +0000)]
Revert "egl/main: convert thread management to use c11 threads"
This reverts commit
33eff853363d7eba5e61b00431b95f7aa0d7b0a5.
Not meant to go in yet. Lacking review.
Emil Velikov [Fri, 6 Mar 2015 17:07:29 +0000 (17:07 +0000)]
Revert "configure: require pthreads for POSIX builds"
This reverts commit
50714cec2b50c7836841c09f04bfe875de00ae1d.
Not meant to go in yet. Lacking review.
Emil Velikov [Fri, 6 Mar 2015 17:07:23 +0000 (17:07 +0000)]
Revert "glx: remove final reference to THREADS"
This reverts commit
8b15a883e0ba72c9156d7192a798bb272e0bc528.
Not meant to go in yet. Lacking review.
Emil Velikov [Fri, 6 Mar 2015 17:07:11 +0000 (17:07 +0000)]
Revert "glx: remove support for non-multithreaded platforms"
This reverts commit
38591295cd4b68f89f257b20f476f98de3772a47.
Not meant to go in yet. Lacking review.
Emil Velikov [Thu, 5 Mar 2015 23:48:29 +0000 (23:48 +0000)]
glx: remove unneeded ifdef _WIN32 guard
The C99 header exists on other platforms as well.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Emil Velikov [Thu, 5 Mar 2015 23:40:10 +0000 (23:40 +0000)]
util: rework _MSC_VER >= 1200 checks
Replace the _MSC_VER >= 1200 with defined (_MSC_VER) and compact if/else
statements. We require MSVC 2008 or later with commit
46110c5d564.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Emil Velikov [Thu, 5 Mar 2015 23:06:42 +0000 (23:06 +0000)]
glx: remove support for non-multithreaded platforms
Implicitly required for a while, although commit
9385c592c68 (mapi:
remove u_thread.h) was the one that put the final nail on the
coffin.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Emil Velikov [Thu, 5 Mar 2015 22:06:06 +0000 (22:06 +0000)]
glx: remove final reference to THREADS
Left over from commit
18db13f5865(mapi: THREADS was always defined,
remove it)
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Emil Velikov [Thu, 5 Mar 2015 22:36:41 +0000 (22:36 +0000)]
configure: require pthreads for POSIX builds
This has been an implicit rule for building mesa for a long time. Let's
make it official and just bail out at configure time. This way we can
cleaning up some of our glx code.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Emil Velikov [Thu, 5 Mar 2015 15:30:12 +0000 (15:30 +0000)]
egl/main: convert thread management to use c11 threads
Convert the code to use the C11 threads implementation, and nuke the
Windows non-pthreads code-path. The c11/threads_win32.h abstraction
should be better than the current code.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Emil Velikov [Thu, 5 Mar 2015 15:07:51 +0000 (15:07 +0000)]
egl/main: use c11/threads' mutex directly
Remove the inline wrappers/abstraction layer.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
José Fonseca [Thu, 11 Dec 2014 22:14:14 +0000 (22:14 +0000)]
include: Add helper header to help trap includes inside extern C.
This is just to help repro and fixing these issues with any C++ compiler --
Commiting this will of course wait until all issues are addressed.
$ scons src/glsl/
scons: Reading SConscript files ...
Checking for GCC ... yes
Checking for Clang ... no
Checking for X11 (x11 xext xdamage xfixes glproto >= 1.4.13)... yes
Checking for XCB (x11-xcb xcb-glx >= 1.8.1 xcb-dri2 >= 1.8)... yes
Checking for XF86VIDMODE (xxf86vm)... yes
Checking for DRM (libdrm >= 2.4.38)... yes
Checking for UDEV (libudev >= 151)... yes
warning: LLVM disabled: not building llvmpipe
scons: done reading SConscript files.
scons: Building targets ...
scons: building associated VariantDir targets: build/linux-x86_64-debug/glsl
Compiling src/glsl/ast_array_index.cpp ...
Compiling src/glsl/ast_expr.cpp ...
Compiling src/glsl/ast_function.cpp ...
Compiling src/glsl/ast_to_hir.cpp ...
Compiling src/glsl/ast_type.cpp ...
Compiling src/glsl/builtin_functions.cpp ...
In file included from include/c99_compat.h:28:0,
from src/mapi/u_compiler.h:4,
from src/mapi/u_thread.h:47,
from src/mapi/glapi/glapi.h:47,
from src/mesa/main/mtypes.h:42,
from src/mesa/main/errors.h:47,
from src/mesa/main/imports.h:41,
from src/mesa/main/core.h:44,
from src/glsl/builtin_functions.cpp:58:
include/no_extern_c.h:48:1: error: template with C linkage
template<class T> class _IncludeInsideExternCNotPortable;
^
In file included from include/c99_compat.h:28:0,
from include/c11/threads.h:38,
from src/mapi/u_thread.h:49,
from src/mapi/glapi/glapi.h:47,
from src/mesa/main/mtypes.h:42,
from src/mesa/main/errors.h:47,
from src/mesa/main/imports.h:41,
from src/mesa/main/core.h:44,
from src/glsl/builtin_functions.cpp:58:
include/no_extern_c.h:48:1: error: template with C linkage
template<class T> class _IncludeInsideExternCNotPortable;
^
Compiling src/glsl/builtin_types.cpp ...
Compiling src/glsl/builtin_variables.cpp ...
scons: *** [build/linux-x86_64-debug/glsl/builtin_functions.os] Error 1
scons: building terminated because of errors.
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Iago Toral Quiroga [Wed, 1 Oct 2014 11:55:32 +0000 (13:55 +0200)]
i965: free scratch buffers when destroying the context
If scratch space is needed for a shader stage we try to reuse the last scratch
buffer bound to that stage. If we can't, we free the old scratch buffer and
allocate a new one. This means we always keep the last scratch buffer for a
particular shader stage around for the entire life span of the context.
These buffers are being reported by Valgrind as definitely lost after
destroying the OpenGL context. For example, for the geometry shader stage:
==18350== 248 bytes in 1 blocks are definitely lost in loss record 85 of 150
==18350== at 0x4C2CC70: calloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==18350== by 0xA1B35D6: drm_intel_gem_bo_alloc_internal (intel_bufmgr_gem.c:724)
==18350== by 0xA1B383F: drm_intel_gem_bo_alloc (intel_bufmgr_gem.c:794)
==18350== by 0xA1AEFA3: drm_intel_bo_alloc (intel_bufmgr.c:52)
==18350== by 0x9D08E31: brw_get_scratch_bo (brw_program.c:226)
==18350== by 0x9D2A0F2: do_gs_prog (brw_vec4_gs.c:280)
==18350== by 0x9D2A635: brw_gs_precompile (brw_vec4_gs.c:401)
==18350== by 0x9D14F68: brw_shader_precompile(gl_context*, gl_shader_program*) (brw_shader.cpp:76)
==18350== by 0x9D157B8: brw_link_shader (brw_shader.cpp:269)
==18350== by 0x9B0941E: _mesa_glsl_link_shader (ir_to_mesa.cpp:3038)
==18350== by 0x99AE4ED: link_program (shaderapi.c:917)
==18350== by 0x99AF365: _mesa_LinkProgram (shaderapi.c:1385)
So make sure that by the time we destroy the context we check if we have live
scratch buffers for the various stages and release them if that is the case.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Ville Syrjälä [Mon, 19 Jan 2015 14:08:31 +0000 (16:08 +0200)]
i965: Fix URB size for CHV
Increase the device info .urb.size for CHV to match the default URB
size (192kB).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Samuel Iglesias Gonsalvez [Mon, 2 Mar 2015 09:49:31 +0000 (10:49 +0100)]
configure: Introduce new output variable to ax_check_python_mako_module.m4
This output variables gives more flexibility for future changes
in autoconf to detect if it is needed to auto-generate files and
check for the auto-generation dependencies.
It is still returning error when Python is not installed.
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Andrey Sudnik [Thu, 5 Mar 2015 19:16:49 +0000 (11:16 -0800)]
i965/vec4: Don't lose the saturate modifier in copy propagation.
Cc: 10.4, 10.5 <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89224
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Matt Turner [Thu, 5 Mar 2015 19:16:07 +0000 (11:16 -0800)]
i965/vec4: Handle saturate in dump_instruction().
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Chia-I Wu [Thu, 5 Mar 2015 20:30:07 +0000 (04:30 +0800)]
ilo: enable L3 cache in MOCS
This enables L3 cache in MOCS almost everywhere.
Chia-I Wu [Thu, 5 Mar 2015 20:24:34 +0000 (04:24 +0800)]
ilo: track if a ilo_view_surface is a scanout
Scanouts require a different cache type.
Chia-I Wu [Thu, 5 Mar 2015 20:27:16 +0000 (04:27 +0800)]
ilo: clean up SURFACE_STATE and BINDING_TABLE_STATE
Add ilo_builder_surface_pointer() to replace ilo_builder_surface_write().
Make Gen8+ take a different path in gen6_SURFACE_STATE().
Brian Paul [Thu, 5 Mar 2015 14:22:40 +0000 (07:22 -0700)]
mapi: actually remove unused u_thread.h
I thought this was in the previous commit in the series.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Rob Clark [Thu, 5 Mar 2015 20:27:27 +0000 (15:27 -0500)]
freedreno/ir3: fix silly typo for binning pass shaders
Was resulting in gl_PointSize write being optimized out, causing
particle system type shaders to hang if hw binning enabled.
Fixes neverball, OGLES2ParticleSystem, etc.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Timothy Arceri [Tue, 24 Feb 2015 06:28:51 +0000 (17:28 +1100)]
glsl: let interface linking code validate its arrays
Currently intrastage arrays are validated twice for interface blocks.
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Timothy Arceri [Sun, 22 Feb 2015 11:52:48 +0000 (22:52 +1100)]
glsl: use common intrastage array validation
Use common intrastage array validation for interface blocks.
This change also allows us to support interface blocks
that are arrays of arrays.
V2: Reinsert unsized array asserts in interstage_match()
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Timothy Arceri [Sat, 21 Feb 2015 10:47:14 +0000 (21:47 +1100)]
glsl: move array validation into its own function
V2: return true when var->type is unsized but max access is within valid range
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Kenneth Graunke [Thu, 5 Mar 2015 02:14:31 +0000 (18:14 -0800)]
i965: Split Gen4-5 BlitFramebuffer code; prefer BLT over Meta.
A while back I switched intel_blit_framebuffer to prefer Meta over the
BLT. This meant that Gen8 platforms would start using the 3D engine
for blits, just like we do on Gen6-7.5.
However, I hadn't considered Gen4-5 when making that change. The BLT
engine appears to be substantially faster on 965GM than using Meta to
drive the 3D engine. This isn't too surprising: original Gen4 doesn't
support tile offsets (that came on G45), and the level/layer fields
don't work for cubemap rendering, so for inconvenient miplevel
alignments, we end up blitting or copying data to/from temporaries
in order to render to it. We may as well just use the blitter.
I chose to use the BLT on Gen4-5 because they use the same ring for
both 3D and BLT; Gen6+ splits it out.
Fixes regressions on 965GM due to botched tile offset code (we should
fix those properly as well, but they're longstanding bugs - for now,
put things back to the status quo).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89430
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Chia-I Wu [Thu, 5 Mar 2015 18:03:10 +0000 (02:03 +0800)]
ilo: add more convenient intel_bo_{ref,unref}()
They both check for NULL and intel_bo_ref() returns the referenced bo. They
replace intel_bo_{reference,unreference}().
Chia-I Wu [Thu, 5 Mar 2015 17:36:01 +0000 (01:36 +0800)]
ilo: add intel_bo_set_tiling()
Make intel_winsys_alloc_bo() always allocate a linear bo, and add
intel_bo_set_tiling() to set the tiling. Document the purpose of tiling.
Chia-I Wu [Thu, 5 Mar 2015 15:53:16 +0000 (23:53 +0800)]
ilo: replace intel_tiling_mode by gen_surface_tiling
The former is used by the kernel driver to set up fence registers and to pass
tiling info across processes. It lacks INTEL_TILING_W, which made our code
less expressive.
Chia-I Wu [Thu, 5 Mar 2015 07:25:43 +0000 (15:25 +0800)]
ilo: update genhw headers
The main change is non-inline <enum>s are now generated as C enums.
Mark Janes [Thu, 5 Mar 2015 00:37:29 +0000 (16:37 -0800)]
Fix invalid extern "C" around header inclusion.
System headers may contain C++ declarations, which cannot be given C
linkage. For this reason, include statements should never occur
inside extern "C".
This patch moves the C linkage statements to enclose only the
declarations within a single header.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Matt Turner [Wed, 4 Mar 2015 23:21:53 +0000 (15:21 -0800)]
i965: Tell intel_get_memcpy() which direction the memcpy() is going.
The SSSE3 swizzling code was written for fast uploads to the GPU and
assumed the destination was always 16-byte aligned. When we began using
this code for fast downloads as well we didn't do anything to account
for the fact that the destination pointer given by glReadPixels() or
glGetTexImage() is not guaranteed to be suitably aligned.
With SSSE3 enabled (at compile-time), some applications would crash when
an SSE aligned-store instruction tried to store to an unaligned
destination (or an assertion that the destination is aligned would
trigger).
To remedy this, tell intel_get_memcpy() whether we're uploading or
downloading so that it can select whether to assume the destination or
source is aligned, respectively.
Cc: 10.5 <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89416
Tested-by: Uriy Zhuravlev <stalkerg@gmail.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Mark Janes [Thu, 5 Mar 2015 18:14:16 +0000 (10:14 -0800)]
mesa/x86: missing stdio inclusions
Several patches added include statements where required by the m64
build. Some files are only compiled for m32, and require similar
changes.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tom Stellard [Wed, 2 Jul 2014 19:42:43 +0000 (15:42 -0400)]
clover: Enable cl_khr_fp64 for devices that support doubles v4
v2:
- Report correct values for CL_DEVICE_NATIVE_VECTOR_WIDTH_DOUBLE
and CL_DEVICE_PREFERRED_VECTOR_WIDTH_DOUBLE.
- Only define cl_khr_fp64 if the extension is supported.
- Remove trailing space from extension string.
- Rename device query function from cl_khr_fp64() to
has_doubles().
v3:
- Return 0 for device::doubled_fp_confg() when doubles aren't
supported.
v4:
- Remove device query for double fp_config.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Emil Velikov [Mon, 2 Mar 2015 15:58:21 +0000 (15:58 +0000)]
xmlpool: make sure we ship options.h
The header is included in ../xmlpool.h. With the latter of which used
directly in a number of places in mesa.
Note that we can also add it (alongside t_option.h) to noinst_HEADERS,
but neither solution fixes the issue that brough us here - namely:
Do not regenerate the headers, if it already exists.
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Emil Velikov [Mon, 2 Mar 2015 15:58:20 +0000 (15:58 +0000)]
mapi: fix *glapi dependency tracking
I.e. add {shared-,}glapi/glapi_mapi_tmp.h to the SOURCES list. Otherwise
there will be no knowledge that the file is required by others for the
build. Thus autotools won't pick it up for the distribution tarball.
v2: Don't forget about the static glapi. Spotted by Matt.
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Emil Velikov [Mon, 2 Mar 2015 15:58:19 +0000 (15:58 +0000)]
mesa: drop Makefile from get_hash.h dependency list
Not required. Additionally this had the side effect of generating the
file, despite it's existence.
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Emil Velikov [Mon, 2 Mar 2015 15:58:18 +0000 (15:58 +0000)]
mesa: fix dependency tracking of generated sources
Some of the files generated were not in the SOURCES variable, thus
although generated prior to compilation the dependency tracking was
incomplete. The latter of which resulted in the files missing from the
distribution tarball.
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Emil Velikov [Mon, 2 Mar 2015 15:58:17 +0000 (15:58 +0000)]
mesa: rename format_info.c to format_info.h
The file is auto-generated, and #included by formats.c. Let's rename it
to reflect the latter. This will also help up fix the dependency
tracking by adding it to the _SOURCES variable, without the side effect
of it being compiled (twice).
v2: Update .gitignore to reflect the rename.
Cc: "10.4, 10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Emil Velikov [Mon, 2 Mar 2015 15:58:16 +0000 (15:58 +0000)]
mesa/main: update .gitignore
Drop the no longer present get_es{1,2}.c from the list.
v2: Keep the format_info.c rename hunk out of this patch.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Emil Velikov [Sat, 28 Feb 2015 17:14:31 +0000 (17:14 +0000)]
egl/main: remove no-longer needed definition of stdint types
All the users directly include the header, plus we have a in-tree
replacements for non C99 compilers which we already use.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Emil Velikov [Sat, 28 Feb 2015 17:12:40 +0000 (17:12 +0000)]
egl/drivers: include stdint.h where needed
Currently these files are including it indirectly via eglcompiler.h
The latter of which will be removed with follow up commits.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Emil Velikov [Sat, 28 Feb 2015 16:51:21 +0000 (16:51 +0000)]
egl/main: drop the declaration of PUBLIC keyword.
Should no longer be used. As many places indirectly include
eglcompiler.h keep this change separate, so that it can be easily
reverted, if needed.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Emil Velikov [Sat, 28 Feb 2015 17:20:01 +0000 (17:20 +0000)]
egl/main: no longer export internal function
With the split of the gallium egl module we had previously it required
access to some of the internal functions. As the only build (automake)
that did this no longer builds it we can now appropriately hide those
functions.
Cc: 10.5 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Emil Velikov [Sat, 28 Feb 2015 16:39:10 +0000 (16:39 +0000)]
egl/main: replace __FUNCTION__ with __func__
The latter is a C99 standard, and our current wrapper c99_compat.h
should handle non-compliant compilers.
Drop the c99_compat.h inclusion from eglcompiler.h altogether, as it's
no longer required.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Emil Velikov [Sat, 28 Feb 2015 16:35:22 +0000 (16:35 +0000)]
egl/main: replace INLINE with inline
Drop the custom keyword in favour of the C99 one. All the places using
it now directly include c99_compat.h which should handle things on
platforms which lack it.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Brian Paul [Thu, 5 Mar 2015 02:17:57 +0000 (19:17 -0700)]
mapi: remove u_thread.h
Just use c11 threads directly.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Brian Paul [Thu, 5 Mar 2015 02:17:57 +0000 (19:17 -0700)]
mapi: use c11 call_once() instead of pthread_once()
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Brian Paul [Thu, 5 Mar 2015 02:17:57 +0000 (19:17 -0700)]
mapi: THREADS was always defined, remove it
THREADS was defined if HAVE_PTHREADS or _WIN32 was defined. That's
always the case. The build would die in c11/threads.h otherwise.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Brian Paul [Thu, 5 Mar 2015 02:17:57 +0000 (19:17 -0700)]
mesa: remove THREADS check, printf calls in debug.c
THREADS is going away in the next commit.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Brian Paul [Thu, 5 Mar 2015 02:17:57 +0000 (19:17 -0700)]
mapi: rewrite u_current_init() function without u_thread_self()
Remove u_thread_self() since u_thread.h is going away soon.
Create a simple thread ID abstraction which wraps WIN32 or c11 threads.
This also gets rid of the questionable casting of thrd_t to an unsigned
long.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Brian Paul [Thu, 5 Mar 2015 02:17:57 +0000 (19:17 -0700)]
mapi: fix preprocessor check in u_current_destroy()
So it matches the preprocessor check around the u_current_init_tsd() code.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Brian Paul [Thu, 5 Mar 2015 02:17:57 +0000 (19:17 -0700)]
mapi: remove u_macros.h
Only U_STRINGIFY() is used in entry.c
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Brian Paul [Thu, 5 Mar 2015 02:17:57 +0000 (19:17 -0700)]
osmesa: include stdio.h
Acked-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Brian Paul [Thu, 5 Mar 2015 02:17:57 +0000 (19:17 -0700)]
xlib: include stdio.h
Acked-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Brian Paul [Thu, 5 Mar 2015 02:17:57 +0000 (19:17 -0700)]
st/osmesa: include stdio.h
Acked-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Brian Paul [Thu, 5 Mar 2015 02:17:57 +0000 (19:17 -0700)]
st/xlib: include stdio.h
Acked-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Brian Paul [Thu, 5 Mar 2015 02:17:57 +0000 (19:17 -0700)]
st/xlib: include stdio.h
Acked-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Brian Paul [Thu, 5 Mar 2015 02:17:57 +0000 (19:17 -0700)]
st/mesa: include stdio.h where needed
Acked-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Brian Paul [Thu, 5 Mar 2015 02:17:57 +0000 (19:17 -0700)]
swrast: include stdio.h where needed
Acked-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Brian Paul [Thu, 5 Mar 2015 02:17:57 +0000 (19:17 -0700)]
nouveau: include stdio.h where needed
Acked-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Brian Paul [Thu, 5 Mar 2015 02:17:57 +0000 (19:17 -0700)]
dri/common: include stdio.h where needed
Acked-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Brian Paul [Thu, 5 Mar 2015 02:17:57 +0000 (19:17 -0700)]
glsl: include stdio.h where needed
Acked-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Brian Paul [Thu, 5 Mar 2015 02:17:57 +0000 (19:17 -0700)]
mesa: include stdio.h where needed
Instead of relying on glapi.h or some other header to provide it.
Acked-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Brian Paul [Thu, 5 Mar 2015 02:17:56 +0000 (19:17 -0700)]
mesa: include c11/threads.h in mtypes.h
Let's directly include c11/threads.h instead of relying on glapi.h
to provide it.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Neil Roberts [Wed, 25 Feb 2015 15:33:08 +0000 (15:33 +0000)]
meta: Fix the y offset for 1D_ARRAY in _mesa_meta_pbo_TexSubImage
The yoffset needs to be interpreted as a slice offset for 1D array
textures. This patch implements that by moving the yoffset into
zoffset similar to how it moves the height into depth.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Neil Roberts [Thu, 26 Feb 2015 12:53:50 +0000 (12:53 +0000)]
meta: Allow GL_UN/PACK_IMAGE_HEIGHT in _mesa_meta_pbo_Get/TexSubImage
Now that a layered source PBO is interpreted as a single tall 2D image
it's quite easy to accept the image height packing option by just
creating an image that is tall enough to include the image padding.
I'm not sure whether the image height property should affect 1D_ARRAY
textures. My intuition and interpretation of the GL spec (which is a
bit vague) would be that it shouldn't. However the software fallback
path in Mesa uses the property for packing but not for unpacking. The
binary NVidia driver uses it for both. This patch doesn't use it for
either case so it is different from the software fallback. There is
some discussion about this here:
http://lists.freedesktop.org/archives/mesa-dev/2015-February/077925.html
This is tested by the texsubimage Piglit test with the array and pbo
arguments. Previously this test was skipping this code path because it
always sets the image height.
I've also tested it by modifying the getteximage-targets test. It
wasn't using this code path before because it was using the default
texture object so this code couldn't successfully create a frame
buffer. I also modified it to add some image padding with the image
height in the PBO.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Neil Roberts [Thu, 26 Feb 2015 12:12:15 +0000 (12:12 +0000)]
Revert "common: Fix PBOs for 1D_ARRAY."
This reverts commit
546aba143d13ba3f993ead4cc30b2404abfc0202.
I think the changes to the calls to glBlitFramebuffer from this patch
are no different to what it was doing previously because it used to
set height to 1 before doing the blits. However it was introducing
some problems with the blit for layer 0 because this was no longer
special cased. It didn't fix problems with the yoffset which needs to
be interpreted as a slice offset. I think a better solution would be
to modify the original if statement to cope with the yoffset.
Conflicts:
src/mesa/drivers/common/meta_tex_subimage.c
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Vinson Lee [Wed, 4 Mar 2015 02:46:13 +0000 (18:46 -0800)]
glsl: Fix GCC unused-variable warning in release build.
CXX ast_array_index.lo
ast_array_index.cpp: In function ‘void update_max_array_access(ir_rvalue*, int, YYLTYPE*, _mesa_glsl_parse_state*)’:
ast_array_index.cpp:86:30: warning: unused variable ‘interface_type’ [-Wunused-variable]
const glsl_type *interface_type =
^
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>
Chia-I Wu [Wed, 4 Mar 2015 21:38:50 +0000 (14:38 -0700)]
ilo: improve WA handling in rectlist path
Add wrappers for 3DPRIMITIVE to make sure we clear current_pipe_control_dw1
and deferred_pipe_control_dw1 after it. Add missing
gen7_wa_post_ps_and_later().
Chia-I Wu [Wed, 4 Mar 2015 21:09:26 +0000 (14:09 -0700)]
ilo: clean up Gen7.5 WAs
These WAs
gen7_wa_post_3dstate_push_constant_alloc_ps()
gen7_wa_pre_vs()
gen7_wa_pre_3dstate_sf_depth_bias()
first half of gen7_wa_pre_depth()
gen7_wa_post_ps_and_later()
are Gen7-specific. Update copy-and-pasted gen8_wa_pre_depth() also.
Tom Stellard [Wed, 4 Mar 2015 21:09:50 +0000 (13:09 -0800)]
clover: Fix build since llvm r231270
Chia-I Wu [Wed, 4 Mar 2015 20:07:55 +0000 (13:07 -0700)]
ilo: add ILO_DEBUG=hang
When set, detect and dump the hanging batch bufffer.
Chia-I Wu [Wed, 4 Mar 2015 19:02:12 +0000 (12:02 -0700)]
ilo: add some more winsys functions
Add intel_winsys_get_reset_stats(), intel_winsys_import_userptr(), and
intel_bo_map_async(). The latter two are stubs, but we are not going to use
them immediately either.
Matt Turner [Fri, 27 Feb 2015 18:22:21 +0000 (10:22 -0800)]
i965/fs: Don't propagate cmod to inst with different type.
Cc: 10.5 <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89317
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Wed, 4 Mar 2015 00:09:58 +0000 (16:09 -0800)]
r300g: Check return value of snprintf().
Would have at least prevented the crash the previous patch fixed.
Cc: 10.4, 10.5 <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.gentoo.org/show_bug.cgi?id=540970
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Matt Turner [Wed, 4 Mar 2015 00:02:40 +0000 (16:02 -0800)]
r300g: Use PATH_MAX instead of limiting ourselves to 100 chars.
When built with Gentoo's package manager, the Mesa source directory
exists seven directories deep. The path to the .test file is too long
and is silently truncated, leading to a crash. Just use PATH_MAX.
Cc: 10.4, 10.5 <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.gentoo.org/show_bug.cgi?id=540970
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Brian Paul [Wed, 4 Mar 2015 17:03:09 +0000 (10:03 -0700)]
glx/tests: add -I src/ to fix make check
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>