OSDN Git Service
Jeremy Boone [Thu, 8 Feb 2018 20:31:16 +0000 (12:31 -0800)]
tpm_i2c_nuvoton: fix potential buffer overruns caused by bit glitches on the bus
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips. In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data. Also sanity check that the expected amount of data is
large enough for the TPM header.
Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Jeremy Boone [Thu, 8 Feb 2018 20:32:06 +0000 (12:32 -0800)]
tpm_tis: fix potential buffer overruns caused by bit glitches on the bus
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips. In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data. Also sanity check that the expected amount of data is
large enough for the TPM header.
Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Linus Torvalds [Mon, 26 Feb 2018 18:19:15 +0000 (10:19 -0800)]
Merge tag 'edac_fixes_for_4.16' of git://git./linux/kernel/git/bp/bp
Pull EDAC fix from Borislav Petkov:
"sb_edac: Prevent memory corruption on KNL (from Anna Karbownik)"
* tag 'edac_fixes_for_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC, sb_edac: Fix out of bound writes during DIMM configuration on KNL
Linus Torvalds [Mon, 26 Feb 2018 17:34:21 +0000 (09:34 -0800)]
Merge branch 'x86-pti-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"Yet another pile of melted spectrum related changes:
- sanitize the array_index_nospec protection mechanism: Remove the
overengineered array_index_nospec_mask_check() magic and allow
const-qualified types as index to avoid temporary storage in a
non-const local variable.
- make the microcode loader more robust by properly propagating error
codes. Provide information about new feature bits after micro code
was updated so administrators can act upon.
- optimizations of the entry ASM code which reduce code footprint and
make the code simpler and faster.
- fix the {pmd,pud}_{set,clear}_flags() implementations to work
properly on paravirt kernels by removing the address translation
operations.
- revert the harmful vmexit_fill_RSB() optimization
- use IBRS around firmware calls
- teach objtool about retpolines and add annotations for indirect
jumps and calls.
- explicitly disable jumplabel patching in __init code and handle
patching failures properly instead of silently ignoring them.
- remove indirect paravirt calls for writing the speculation control
MSR as these calls are obviously proving the same attack vector
which is tried to be mitigated.
- a few small fixes which address build issues with recent compiler
and assembler versions"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
KVM/VMX: Optimize vmx_vcpu_run() and svm_vcpu_run() by marking the RDMSR path as unlikely()
KVM/x86: Remove indirect MSR op calls from SPEC_CTRL
objtool, retpolines: Integrate objtool with retpoline support more closely
x86/entry/64: Simplify ENCODE_FRAME_POINTER
extable: Make init_kernel_text() global
jump_label: Warn on failed jump_label patching attempt
jump_label: Explicitly disable jump labels in __init code
x86/entry/64: Open-code switch_to_thread_stack()
x86/entry/64: Move ASM_CLAC to interrupt_entry()
x86/entry/64: Remove 'interrupt' macro
x86/entry/64: Move the switch_to_thread_stack() call to interrupt_entry()
x86/entry/64: Move ENTER_IRQ_STACK from interrupt macro to interrupt_entry
x86/entry/64: Move PUSH_AND_CLEAR_REGS from interrupt macro to helper function
x86/speculation: Move firmware_restrict_branch_speculation_*() from C to CPP
objtool: Add module specific retpoline rules
objtool: Add retpoline validation
objtool: Use existing global variables for options
x86/mm/sme, objtool: Annotate indirect call in sme_encrypt_execute()
x86/boot, objtool: Annotate indirect jump in secondary_startup_64()
x86/paravirt, objtool: Annotate indirect calls
...
Linus Torvalds [Mon, 26 Feb 2018 17:28:35 +0000 (09:28 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"s390:
- optimization for the exitless interrupt support that was merged in 4.16-rc1
- improve the branch prediction blocking for nested KVM
- replace some jump tables with switch statements to improve expoline performance
- fixes for multiple epoch facility
ARM:
- fix the interaction of userspace irqchip VMs with in-kernel irqchip VMs
- make sure we can build 32-bit KVM/ARM with gcc-8.
x86:
- fixes for AMD SEV
- fixes for Intel nested VMX, emulated UMIP and a dump_stack() on VM startup
- fixes for async page fault migration
- small optimization to PV TLB flush (new in 4.16-rc1)
- syzkaller fixes
Generic:
- compiler warning fixes
- syzkaller fixes
- more improvements to the kvm_stat tool
Two more small Spectre fixes are going to reach you via Ingo"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (40 commits)
KVM: SVM: Fix SEV LAUNCH_SECRET command
KVM: SVM: install RSM intercept
KVM: SVM: no need to call access_ok() in LAUNCH_MEASURE command
include: psp-sev: Capitalize invalid length enum
crypto: ccp: Fix sparse, use plain integer as NULL pointer
KVM: X86: Avoid traversing all the cpus for pv tlb flush when steal time is disabled
x86/kvm: Make parse_no_xxx __init for kvm
KVM: x86: fix backward migration with async_PF
kvm: fix warning for non-x86 builds
kvm: fix warning for CONFIG_HAVE_KVM_EVENTFD builds
tools/kvm_stat: print 'Total' line for multiple events only
tools/kvm_stat: group child events indented after parent
tools/kvm_stat: separate drilldown and fields filtering
tools/kvm_stat: eliminate extra guest/pid selection dialog
tools/kvm_stat: mark private methods as such
tools/kvm_stat: fix debugfs handling
tools/kvm_stat: print error on invalid regex
tools/kvm_stat: fix crash when filtering out all non-child trace events
tools/kvm_stat: avoid 'is' for equality checks
tools/kvm_stat: use a more pythonic way to iterate over dictionaries
...
Linus Torvalds [Mon, 26 Feb 2018 02:50:41 +0000 (18:50 -0800)]
Linux 4.16-rc3
Linus Torvalds [Mon, 26 Feb 2018 01:02:24 +0000 (17:02 -0800)]
Merge tag 'xtensa-
20180225' of git://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa fixes from Max Filippov:
"Two fixes for reserved memory/DMA buffers allocation in high memory on
xtensa architecture
- fix memory accounting when reserved memory is in high memory region
- fix DMA allocation from high memory"
* tag 'xtensa-
20180225' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: support DMA buffers in high memory
xtensa: fix high memory/reserved memory collision
Linus Torvalds [Mon, 26 Feb 2018 00:58:55 +0000 (16:58 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A small set of fixes:
- UAPI data type correction for hyperv
- correct the cpu cores field in /proc/cpuinfo on CPU hotplug
- return proper error code in the resctrl file system failure path to
avoid silent subsequent failures
- correct a subtle accounting issue in the new vector allocation code
which went unnoticed for a while and caused suspend/resume
failures"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/topology: Update the 'cpu cores' field in /proc/cpuinfo correctly across CPU hotplug operations
x86/topology: Fix function name in documentation
x86/intel_rdt: Fix incorrect returned value when creating rdgroup sub-directory in resctrl file system
x86/apic/vector: Handle vector release on CPU unplug correctly
genirq/matrix: Handle CPU offlining proper
x86/headers/UAPI: Use __u64 instead of u64 in <uapi/asm/hyperv.h>
Linus Torvalds [Mon, 26 Feb 2018 00:57:22 +0000 (16:57 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fix from Thomas Gleixner:
"A single commit which shuts up a bogus GCC-8 warning"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/oprofile: Fix bogus GCC-8 warning in nmi_setup()
Linus Torvalds [Mon, 26 Feb 2018 00:29:59 +0000 (16:29 -0800)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Three patches to fix memory ordering issues on ALPHA and a comment to
clarify the usage scope of a mutex internal function"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/xchg/alpha: Fix xchg() and cmpxchg() memory ordering bugs
locking/xchg/alpha: Clean up barrier usage by using smp_mb() in place of __ASM__MB
locking/xchg/alpha: Add unconditional memory barrier to cmpxchg()
locking/mutex: Add comment to __mutex_owner() to deter usage
Linus Torvalds [Mon, 26 Feb 2018 00:27:51 +0000 (16:27 -0800)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull cleanup patchlet from Thomas Gleixner:
"A single commit removing a bunch of bogus double semicolons all over
the tree"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide/trivial: Remove ';;$' typo noise
Linus Torvalds [Sun, 25 Feb 2018 21:43:18 +0000 (13:43 -0800)]
Merge tag 'nfs-for-4.16-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
- fix a broken cast in nfs4_callback_recallany()
- fix an Oops during NFSv4 migration events
- make struct nlmclnt_fl_close_lock_ops static
* tag 'nfs-for-4.16-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: make struct nlmclnt_fl_close_lock_ops static
nfs: system crashes after NFS4ERR_MOVED recovery
NFSv4: Fix broken cast in nfs4_callback_recallany()
Linus Torvalds [Sun, 25 Feb 2018 00:05:50 +0000 (16:05 -0800)]
Merge tag 'powerpc-4.16-4' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Add handling for a missing instruction in our 32-bit BPF JIT so that
it can be used for seccomp filtering.
- Add a missing NULL pointer check before a function call in new EEH
code.
- Fix an error path in the new ocxl driver to correctly return EFAULT.
- The support for the new ibm,drc-info device tree property turns out
to need several fixes, so for now we just stop advertising to
firmware that we support it until the bugs can be ironed out.
- One fix for the new drmem code which was incorrectly modifying the
device tree in place.
- Finally two fixes for the RFI flush support, so that firmware can
advertise to us that it should be disabled entirely so as not to
affect performance.
Thanks to: Bharata B Rao, Frederic Barrat, Juan J. Alvarez, Mark Lord,
Michael Bringmann.
* tag 'powerpc-4.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv: Support firmware disable of RFI flush
powerpc/pseries: Support firmware disable of RFI flush
powerpc/mm/drmem: Fix unexpected flag value in ibm,dynamic-memory-v2
powerpc/bpf/jit: Fix 32-bit JIT for seccomp_data access
powerpc/pseries: Revert support for ibm,drc-info devtree property
powerpc/pseries: Fix duplicate firmware feature for DRC_INFO
ocxl: Fix potential bad errno on irq allocation
powerpc/eeh: Fix crashes in eeh_report_resume()
Brijesh Singh [Mon, 19 Feb 2018 16:13:25 +0000 (10:13 -0600)]
KVM: SVM: Fix SEV LAUNCH_SECRET command
The SEV LAUNCH_SECRET command fails with error code 'invalid param'
because we missed filling the guest and header system physical address
while issuing the command.
Fixes:
9f5b5b950aa9 (KVM: SVM: Add support for SEV LAUNCH_SECRET command)
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-kernel@vger.kernel.org
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Brijesh Singh [Mon, 19 Feb 2018 16:14:44 +0000 (10:14 -0600)]
KVM: SVM: install RSM intercept
RSM instruction is used by the SMM handler to return from SMM mode.
Currently, rsm causes a #UD - which results in instruction fetch, decode,
and emulate. By installing the RSM intercept we can avoid the instruction
fetch since we know that #VMEXIT was due to rsm.
The patch is required for the SEV guest, because in case of SEV guest
memory is encrypted with guest-specific key and hypervisor will not
able to fetch the instruction bytes from the guest memory.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Brijesh Singh [Fri, 23 Feb 2018 18:36:50 +0000 (12:36 -0600)]
KVM: SVM: no need to call access_ok() in LAUNCH_MEASURE command
Using the access_ok() to validate the input before issuing the SEV
command does not buy us anything in this case. If userland is
giving us a garbage pointer then copy_to_user() will catch it when we try
to return the measurement.
Suggested-by: Al Viro <viro@ZenIV.linux.org.uk>
Fixes:
0d0736f76347 (KVM: SVM: Add support for KVM_SEV_LAUNCH_MEASURE ...)
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-kernel@vger.kernel.org
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Brijesh Singh [Mon, 15 Jan 2018 13:32:04 +0000 (07:32 -0600)]
include: psp-sev: Capitalize invalid length enum
Commit
1d57b17c60ff ("crypto: ccp: Define SEV userspace ioctl and command
id") added the invalid length enum but we missed capitalizing it.
Fixes:
1d57b17c60ff (crypto: ccp: Define SEV userspace ioctl ...)
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
CC: Gary R Hook <gary.hook@amd.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Brijesh Singh [Mon, 15 Jan 2018 13:32:02 +0000 (07:32 -0600)]
crypto: ccp: Fix sparse, use plain integer as NULL pointer
Fix sparse warning: Using plain integer as NULL pointer. Replaces
assignment of 0 to pointer with NULL assignment.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Gary Hook <gary.hook@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wanpeng Li [Mon, 5 Feb 2018 06:57:58 +0000 (22:57 -0800)]
KVM: X86: Avoid traversing all the cpus for pv tlb flush when steal time is disabled
Avoid traversing all the cpus for pv tlb flush when steal time
is disabled since pv tlb flush depends on the field in steal time
for shared data.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim KrÄmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dou Liyang [Wed, 17 Jan 2018 03:46:54 +0000 (11:46 +0800)]
x86/kvm: Make parse_no_xxx __init for kvm
The early_param() is only called during kernel initialization, So Linux
marks the functions of it with __init macro to save memory.
But it forgot to mark the parse_no_kvmapf/stealacc/kvmclock_vsyscall,
So, Make them __init as well.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: rkrcmar@redhat.com
Cc: kvm@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: x86@kernel.org
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Radim Krčmář [Thu, 1 Feb 2018 21:16:21 +0000 (22:16 +0100)]
KVM: x86: fix backward migration with async_PF
Guests on new hypersiors might set KVM_ASYNC_PF_DELIVERY_AS_PF_VMEXIT
bit when enabling async_PF, but this bit is reserved on old hypervisors,
which results in a failure upon migration.
To avoid breaking different cases, we are checking for CPUID feature bit
before enabling the feature and nothing else.
Fixes:
52a5c155cf79 ("KVM: async_pf: Let guest support delivery of async_pf from guest mode")
Cc: <stable@vger.kernel.org>
Reviewed-by: Wanpeng Li <wanpengli@tencent.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sebastian Ott [Thu, 22 Feb 2018 12:04:39 +0000 (13:04 +0100)]
kvm: fix warning for non-x86 builds
Fix the following sparse warning by moving the prototype
of kvm_arch_mmu_notifier_invalidate_range() to linux/kvm_host.h .
CHECK arch/s390/kvm/../../../virt/kvm/kvm_main.c
arch/s390/kvm/../../../virt/kvm/kvm_main.c:138:13: warning: symbol 'kvm_arch_mmu_notifier_invalidate_range' was not declared. Should it be static?
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sebastian Ott [Thu, 22 Feb 2018 12:05:41 +0000 (13:05 +0100)]
kvm: fix warning for CONFIG_HAVE_KVM_EVENTFD builds
Move the kvm_arch_irq_routing_update() prototype outside of
ifdef CONFIG_HAVE_KVM_EVENTFD guards to fix the following sparse warning:
arch/s390/kvm/../../../virt/kvm/irqchip.c:171:28: warning: symbol 'kvm_arch_irq_routing_update' was not declared. Should it be static?
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stefan Raspl [Thu, 22 Feb 2018 11:16:30 +0000 (12:16 +0100)]
tools/kvm_stat: print 'Total' line for multiple events only
The 'Total' line looks a bit weird when we have a single event only. This
can happen e.g. due to filters. Therefore suppress when there's only a
single event in the output.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stefan Raspl [Thu, 22 Feb 2018 11:16:29 +0000 (12:16 +0100)]
tools/kvm_stat: group child events indented after parent
We keep the current logic that sorts all events (parent and child), but
re-shuffle the events afterwards, grouping the children after the
respective parent. Note that the percentage column for child events
gives the percentage of the parent's total.
Since we rework the logic anyway, we modify the total average
calculation to use the raw numbers instead of the (rounded) averages.
Note that this can result in differing numbers (between total average
and the sum of the individual averages) due to rounding errors.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stefan Raspl [Thu, 22 Feb 2018 11:16:28 +0000 (12:16 +0100)]
tools/kvm_stat: separate drilldown and fields filtering
Drilldown (i.e. toggle display of child trace events) was implemented by
overriding the fields filter. This resulted in inconsistencies: E.g. when
drilldown was not active, adding a filter that also matches child trace
events would not only filter fields according to the filter, but also add
in the child trace events matching the filter. E.g. on x86, setting
'kvm_userspace_exit' as the fields filter after startup would result in
display of kvm_userspace_exit(DCR), although that wasn't previously
present - not exactly what one would expect from a filter.
This patch addresses the issue by keeping drilldown and fields filter
separate. While at it, we also fix a PEP8 issue by adding a blank line
at one place (since we're in the area...).
We implement this by adding a framework that also allows to define a
taxonomy among the debugfs events to identify child trace events. I.e.
drilldown using 'x' can now also work with debugfs. A respective parent-
child relationship is only known for S390 at the moment, but could be
added adjusting other platforms' ARCH.dbg_is_child() methods
accordingly.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stefan Raspl [Thu, 22 Feb 2018 11:16:27 +0000 (12:16 +0100)]
tools/kvm_stat: eliminate extra guest/pid selection dialog
We can do with a single dialog that takes both, pids and guest names.
Note that we keep both interactive commands, 'p' and 'g' for now, to
avoid confusion among users used to a specific key.
While at it, we improve on some minor glitches regarding curses usage,
e.g. cursor still visible when not supposed to be.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stefan Raspl [Thu, 22 Feb 2018 11:16:26 +0000 (12:16 +0100)]
tools/kvm_stat: mark private methods as such
Helps quite a bit reading the code when it's obvious when a method is
intended for internal use only.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stefan Raspl [Thu, 22 Feb 2018 11:16:24 +0000 (12:16 +0100)]
tools/kvm_stat: fix debugfs handling
Te checks for debugfs assumed that debugfs is always mounted at
/sys/kernel/debug - which is likely, but not guaranteed. This is addressed
by checking /proc/mounts for the actual location.
Furthermore, when debugfs was mounted, but the kvm module not loaded, a
misleading error pointing towards debugfs not present was given.
To reproduce,
(a) run kvm_stat with debugfs mounted at a place different from
/sys/kernel/debug
(b) run kvm_stat with debugfs mounted but kvm module not loaded
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stefan Raspl [Mon, 5 Feb 2018 12:59:58 +0000 (13:59 +0100)]
tools/kvm_stat: print error on invalid regex
Entering an invalid regular expression did not produce any indication of an
error so far.
To reproduce, press 'f' and enter 'foo(' (with an unescaped bracket).
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stefan Raspl [Mon, 5 Feb 2018 12:59:57 +0000 (13:59 +0100)]
tools/kvm_stat: fix crash when filtering out all non-child trace events
When we apply a filter that will only leave child trace events, we
receive a ZeroDivisionError when calculating the percentages.
In that case, provide percentages based on child events only.
To reproduce, run 'kvm_stat -f .*[\(].*'.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Marc Hartmayer [Tue, 9 Jan 2018 12:27:04 +0000 (13:27 +0100)]
tools/kvm_stat: avoid 'is' for equality checks
Use '==' for equality checks and 'is' when comparing identities.
An example where '==' and 'is' behave differently:
>>> a = 4242
>>> a == 4242
True
>>> a is 4242
False
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Marc Hartmayer [Tue, 9 Jan 2018 12:27:03 +0000 (13:27 +0100)]
tools/kvm_stat: use a more pythonic way to iterate over dictionaries
If it's clear that the values of a dictionary will be used then use
the '.items()' method.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Tested-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
[Include fix for logging mode by Stefan Raspl]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Marc Hartmayer [Tue, 9 Jan 2018 12:27:02 +0000 (13:27 +0100)]
tools/kvm_stat: use a namedtuple for storing the values
Use a namedtuple for storing the values as it allows to access the
fields of a tuple via names. This makes the overall code much easier
to read and to understand. Access by index is still possible as
before.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Tested-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Marc Hartmayer [Tue, 9 Jan 2018 12:27:01 +0000 (13:27 +0100)]
tools/kvm_stat: simplify the sortkey function
The 'sortkey' function references a value in its enclosing
scope (closure). This is not common practice for a sort key function
so let's replace it. Additionally, the function 'sorted' has already a
parameter for reversing the result therefore the inversion of the
values is unneeded. The check for stats[x][1] is also superfluous as
it's ensured that this value is initialized with 0.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Tested-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wanpeng Li [Thu, 8 Feb 2018 07:32:45 +0000 (15:32 +0800)]
KVM: X86: Fix SMRAM accessing even if VM is shutdown
Reported by syzkaller:
WARNING: CPU: 6 PID: 2434 at arch/x86/kvm/vmx.c:6660 handle_ept_misconfig+0x54/0x1e0 [kvm_intel]
CPU: 6 PID: 2434 Comm: repro_test Not tainted 4.15.0+ #4
RIP: 0010:handle_ept_misconfig+0x54/0x1e0 [kvm_intel]
Call Trace:
vmx_handle_exit+0xbd/0xe20 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0xdaf/0x1d50 [kvm]
kvm_vcpu_ioctl+0x3e9/0x720 [kvm]
do_vfs_ioctl+0xa4/0x6a0
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x25/0x9c
The testcase creates a first thread to issue KVM_SMI ioctl, and then creates
a second thread to mmap and operate on the same vCPU. This triggers a race
condition when running the testcase with multiple threads. Sometimes one thread
exits with a triple fault while another thread mmaps and operates on the same
vCPU. Because CS=0x3000/IP=0x8000 is not mapped, accessing the SMI handler
results in an EPT misconfig. This patch fixes it by returning RET_PF_EMULATE
in kvm_handle_bad_page(), which will go on to cause an emulation failure and an
exit with KVM_EXIT_INTERNAL_ERROR.
Reported-by: syzbot+c1d9517cab094dae65e446c0c5b4de6c40f4dc58@syzkaller.appspotmail.com
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Chao Gao [Sun, 11 Feb 2018 02:06:30 +0000 (10:06 +0800)]
KVM: nVMX: Don't halt vcpu when L1 is injecting events to L2
Although L2 is in halt state, it will be in the active state after
VM entry if the VM entry is vectoring according to SDM 26.6.2 Activity
State. Halting the vcpu here means the event won't be injected to L2
and this decision isn't reported to L1. Thus L0 drops an event that
should be injected to L2.
Cc: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wanpeng Li [Tue, 13 Feb 2018 14:36:00 +0000 (15:36 +0100)]
KVM: mmu: Fix overlap between public and private memslots
Reported by syzkaller:
pte_list_remove:
ffff9714eb1f8078 0->BUG
------------[ cut here ]------------
kernel BUG at arch/x86/kvm/mmu.c:1157!
invalid opcode: 0000 [#1] SMP
RIP: 0010:pte_list_remove+0x11b/0x120 [kvm]
Call Trace:
drop_spte+0x83/0xb0 [kvm]
mmu_page_zap_pte+0xcc/0xe0 [kvm]
kvm_mmu_prepare_zap_page+0x81/0x4a0 [kvm]
kvm_mmu_invalidate_zap_all_pages+0x159/0x220 [kvm]
kvm_arch_flush_shadow_all+0xe/0x10 [kvm]
kvm_mmu_notifier_release+0x6c/0xa0 [kvm]
? kvm_mmu_notifier_release+0x5/0xa0 [kvm]
__mmu_notifier_release+0x79/0x110
? __mmu_notifier_release+0x5/0x110
exit_mmap+0x15a/0x170
? do_exit+0x281/0xcb0
mmput+0x66/0x160
do_exit+0x2c9/0xcb0
? __context_tracking_exit.part.5+0x4a/0x150
do_group_exit+0x50/0xd0
SyS_exit_group+0x14/0x20
do_syscall_64+0x73/0x1f0
entry_SYSCALL64_slow_path+0x25/0x25
The reason is that when creates new memslot, there is no guarantee for new
memslot not overlap with private memslots. This can be triggered by the
following program:
#include <fcntl.h>
#include <pthread.h>
#include <setjmp.h>
#include <signal.h>
#include <stddef.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/ioctl.h>
#include <sys/stat.h>
#include <sys/syscall.h>
#include <sys/types.h>
#include <unistd.h>
#include <linux/kvm.h>
long r[16];
int main()
{
void *p = valloc(0x4000);
r[2] = open("/dev/kvm", 0);
r[3] = ioctl(r[2], KVM_CREATE_VM, 0x0ul);
uint64_t addr = 0xf000;
ioctl(r[3], KVM_SET_IDENTITY_MAP_ADDR, &addr);
r[6] = ioctl(r[3], KVM_CREATE_VCPU, 0x0ul);
ioctl(r[3], KVM_SET_TSS_ADDR, 0x0ul);
ioctl(r[6], KVM_RUN, 0);
ioctl(r[6], KVM_RUN, 0);
struct kvm_userspace_memory_region mr = {
.slot = 0,
.flags = KVM_MEM_LOG_DIRTY_PAGES,
.guest_phys_addr = 0xf000,
.memory_size = 0x4000,
.userspace_addr = (uintptr_t) p
};
ioctl(r[3], KVM_SET_USER_MEMORY_REGION, &mr);
return 0;
}
This patch fixes the bug by not adding a new memslot even if it
overlaps with private memslots.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
---
virt/kvm/kvm_main.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
Eric Biggers [Thu, 1 Feb 2018 01:30:21 +0000 (17:30 -0800)]
KVM/x86: remove WARN_ON() for when vm_munmap() fails
On x86, special KVM memslots such as the TSS region have anonymous
memory mappings created on behalf of userspace, and these mappings are
removed when the VM is destroyed.
It is however possible for removing these mappings via vm_munmap() to
fail. This can most easily happen if the thread receives SIGKILL while
it's waiting to acquire ->mmap_sem. This triggers the 'WARN_ON(r < 0)'
in __x86_set_memory_region(). syzkaller was able to hit this, using
'exit()' to send the SIGKILL. Note that while the vm_munmap() failure
results in the mapping not being removed immediately, it is not leaked
forever but rather will be freed when the process exits.
It's not really possible to handle this failure properly, so almost
every other caller of vm_munmap() doesn't check the return value. It's
a limitation of having the kernel manage these mappings rather than
userspace.
So just remove the WARN_ON() so that users can't spam the kernel log
with this warning.
Fixes:
f0d648bdf0a5 ("KVM: x86: map/unmap private slots in __x86_set_memory_region")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Radim Krčmář [Wed, 31 Jan 2018 17:12:50 +0000 (18:12 +0100)]
KVM: nVMX: preserve SECONDARY_EXEC_DESC without UMIP
L1 might want to use SECONDARY_EXEC_DESC, so we must not clear the VMCS
bit if UMIP is not being emulated.
We must still set the bit when emulating UMIP as the feature can be
passed to L2 where L0 will do the emulation and because L2 can change
CR4 without a VM exit, we should clear the bit if UMIP is disabled.
Fixes:
0367f205a3b7 ("KVM: vmx: add support for emulating UMIP")
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Paolo Bonzini [Fri, 23 Feb 2018 22:29:32 +0000 (23:29 +0100)]
KVM: x86: move LAPIC initialization after VMCS creation
The initial reset of the local APIC is performed before the VMCS has been
created, but it tries to do a vmwrite:
vmwrite error: reg 810 value 4a00 (err 18944)
CPU: 54 PID: 38652 Comm: qemu-kvm Tainted: G W I 4.16.0-0.rc2.git0.1.fc28.x86_64 #1
Hardware name: Intel Corporation S2600CW/S2600CW, BIOS SE5C610.86B.01.01.0003.
090520141303 09/05/2014
Call Trace:
vmx_set_rvi [kvm_intel]
vmx_hwapic_irr_update [kvm_intel]
kvm_lapic_reset [kvm]
kvm_create_lapic [kvm]
kvm_arch_vcpu_init [kvm]
kvm_vcpu_init [kvm]
vmx_create_vcpu [kvm_intel]
kvm_vm_ioctl [kvm]
Move it later, after the VMCS has been created.
Fixes:
4191db26b714 ("KVM: x86: Update APICv on APIC reset")
Cc: stable@vger.kernel.org
Cc: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Fri, 23 Feb 2018 23:14:17 +0000 (15:14 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Fix TTL offset calculation in mac80211 mesh code, from Peter Oh.
2) Fix races with procfs in ipt_CLUSTERIP, from Cong Wang.
3) Memory leak fix in lpm_trie BPF map code, from Yonghong Song.
4) Need to use GFP_ATOMIC in BPF cpumap allocations, from Jason Wang.
5) Fix potential deadlocks in netfilter getsockopt() code paths, from
Paolo Abeni.
6) Netfilter stackpointer size checks really are needed to validate
user input, from Florian Westphal.
7) Missing timer init in x_tables, from Paolo Abeni.
8) Don't use WQ_MEM_RECLAIM in mac80211 hwsim, from Johannes Berg.
9) When an ibmvnic device is brought down then back up again, it can be
sent queue entries from a previous session, handle this properly
instead of crashing. From Thomas Falcon.
10) Fix TCP checksum on LRO buffers in mlx5e, from Gal Pressman.
11) When we are dumping filters in cls_api, the output SKB is empty, and
the filter we are dumping is too large for the space in the SKB, we
should return -EMSGSIZE like other netlink dump operations do.
Otherwise userland has no signal that is needs to increase the size
of its read buffer. From Roman Kapl.
12) Several XDP fixes for virtio_net, from Jesper Dangaard Brouer.
13) Module refcount leak in netlink when a dump start fails, from Jason
Donenfeld.
14) Handle sub-optimal GSO sizes better in TCP BBR congestion control,
from Eric Dumazet.
15) Releasing bpf per-cpu arraymaps can take a long time, add a
condtional scheduling point. From Eric Dumazet.
16) Implement retpolines for tail calls in x64 and arm64 bpf JITs. From
Daniel Borkmann.
17) Fix page leak in gianfar driver, from Andy Spencer.
18) Missed clearing of estimator scratch buffer, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
net_sched: gen_estimator: fix broken estimators based on percpu stats
gianfar: simplify FCS handling and fix memory leak
ipv6 sit: work around bogus gcc-8 -Wrestrict warning
macvlan: fix use-after-free in macvlan_common_newlink()
bpf, arm64: fix out of bounds access in tail call
bpf, x64: implement retpoline for tail call
rxrpc: Fix send in rxrpc_send_data_packet()
net: aquantia: Fix error handling in aq_pci_probe()
bpf: fix rcu lockdep warning for lpm_trie map_free callback
bpf: add schedule points in percpu arrays management
regulatory: add NUL to request alpha2
ibmvnic: Fix early release of login buffer
net/smc9194: Remove bogus CONFIG_MAC reference
net: ipv4: Set addr_type in hash_keys for forwarded case
tcp_bbr: better deal with suboptimal GSO
smsc75xx: fix smsc75xx_set_features()
netlink: put module reference if dump start fails
selftests/bpf/test_maps: exit child process without error in ENOMEM case
selftests/bpf: update gitignore with test_libbpf_open
selftests/bpf: tcpbpf_kern: use in6_* macros from glibc
..
Linus Torvalds [Fri, 23 Feb 2018 23:04:24 +0000 (15:04 -0800)]
Merge branch 'fixes-v4.16-rc3' of git://git./linux/kernel/git/jmorris/linux-security
Pull security subsystem fixes from James Morris:
- keys fixes via David Howells:
"A collection of fixes for Linux keyrings, mostly thanks to Eric
Biggers:
- Fix some PKCS#7 verification issues.
- Fix handling of unsupported crypto in X.509.
- Fix too-large allocation in big_key"
- Seccomp updates via Kees Cook:
"These are fixes for the get_metadata interface that landed during
-rc1. While the new selftest is strictly not a bug fix, I think
it's in the same spirit of avoiding bugs"
- an IMA build fix from Randy Dunlap
* 'fixes-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
integrity/security: fix digsig.c build error with header file
KEYS: Use individual pages in big_key for crypto buffers
X.509: fix NULL dereference when restricting key with unsupported_sig
X.509: fix BUG_ON() when hash algorithm is unsupported
PKCS#7: fix direct verification of SignerInfo signature
PKCS#7: fix certificate blacklisting
PKCS#7: fix certificate chain verification
seccomp: add a selftest for get_metadata
ptrace, seccomp: tweak get_metadata behavior slightly
seccomp, ptrace: switch get_metadata types to arch independent
Linus Torvalds [Fri, 23 Feb 2018 23:01:01 +0000 (15:01 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"arm64 and perf fixes:
- build error when accessing MPIDR_HWID_BITMASK from .S
- fix CTR_EL0 field definitions
- remove/disable some kernel messages on user faults (unhandled
signals, unimplemented syscalls)
- fix kernel page fault in unwind_frame() with function graph tracing
- fix perf sleeping while atomic errors when booting with ACPI"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: fix unwind_frame() for filtered out fn for function graph tracing
arm64: Enforce BBM for huge IO/VMAP mappings
arm64: perf: correct PMUVer probing
arm_pmu: acpi: request IRQs up-front
arm_pmu: note IRQs and PMUs per-cpu
arm_pmu: explicitly enable/disable SPIs at hotplug
arm_pmu: acpi: check for mismatched PPIs
arm_pmu: add armpmu_alloc_atomic()
arm_pmu: fold platform helpers into platform code
arm_pmu: kill arm_pmu_platdata
ARM: ux500: remove PMU IRQ bouncer
arm64: __show_regs: Only resolve kernel symbols when running at EL1
arm64: Remove unimplemented syscall log message
arm64: Disable unhandled signal log messages by default
arm64: cpufeature: Fix CTR_EL0 field definitions
arm64: uaccess: Formalise types for access_ok()
arm64: Fix compilation error while accessing MPIDR_HWID_BITMASK from .S files
Linus Torvalds [Fri, 23 Feb 2018 22:59:29 +0000 (14:59 -0800)]
Merge tag 'mips_fixes_4.16_3' of git://git./linux/kernel/git/jhogan/mips
Pull MIPS fix from James Hogan:
"A single MIPS fix for mismatching struct compat_flock, resulting in
bus errors starting Firefox on Debian 8 since 4.13"
* tag 'mips_fixes_4.16_3' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
MIPS: Drop spurious __unused in struct compat_flock
Linus Torvalds [Fri, 23 Feb 2018 22:57:20 +0000 (14:57 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/pmladek/printk
Pull printk fixlet from Petr Mladek:
"People expect to see the real pointer value for %px.
Let's substitute '(null)' only for the other %p? format modifiers that
need to deference the pointer"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
vsprintf: avoid misleading "(null)" for %px
Linus Torvalds [Fri, 23 Feb 2018 22:41:14 +0000 (14:41 -0800)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two bugfixes, one v4.16 regression fix, and two documentation fixes"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: designware: Consider SCL GPIO optional
i2c: busses: i2c-sirf: Fix spelling: "formular" -> "formula".
i2c: bcm2835: Set up the rising/falling edge delays
i2c: i801: Add missing documentation entries for Braswell and Kaby Lake
i2c: designware: must wait for enable
Linus Torvalds [Fri, 23 Feb 2018 22:09:43 +0000 (14:09 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"These are mostly fixes for problems with merge window code.
In addition we have one doc update (alua) and two dead code removals
(aiclib and octogon) a spurious assignment removal (csiostor) and a
performance improvement for storvsc involving better interrupt
spreading and increasing the command per lun handling"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla4xxx: skip error recovery in case of register disconnect.
scsi: aacraid: fix shutdown crash when init fails
scsi: qedi: Cleanup local str variable
scsi: qedi: Fix truncation of CHAP name and secret
scsi: qla2xxx: Fix incorrect handle for abort IOCB
scsi: qla2xxx: Fix double free bug after firmware timeout
scsi: storvsc: Increase cmd_per_lun for higher speed devices
scsi: qla2xxx: Fix a locking imbalance in qlt_24xx_handle_els()
scsi: scsi_dh: Document alua_rtpg_queue() arguments
scsi: Remove Makefile entry for oktagon files
scsi: aic7xxx: remove aiclib.c
scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion()
scsi: mptfusion: Add bounds check in mptctl_hp_targetinfo()
scsi: sym53c8xx_2: iterator underflow in sym_getsync()
scsi: bnx2fc: Fix check in SCSI completion handler for timed out request
scsi: csiostor: remove redundant assignment to pointer 'ln'
scsi: ufs: Enable quirk to ignore sending WRITE_SAME command
scsi: ibmvfc: fix misdefined reserved field in ibmvfc_fcp_rsp_info
scsi: qla2xxx: Fix memory corruption during hba reset test
scsi: mpt3sas: fix an out of bound write
Linus Torvalds [Fri, 23 Feb 2018 18:31:31 +0000 (10:31 -0800)]
Merge tag 'drm-fixes-for-v4.16-rc3' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"A bunch of fixes for rc3:
Exynos:
- fixes for using monotonic timestamps
- register definitions
- removal of unused file
ipu-v3L
- minor changes
- make some register arrays const+static
- fix some leaks
meson:
- fix for vsync
atomic:
- fix for memory leak
EDID parser:
- add quirks for some more non-desktop devices
- 6-bit panel fix.
drm_mm:
- fix a bug in the core drm mm hole handling
cirrus:
- fix lut loading regression
Lastly there is a deadlock fix around runtime suspend for secondary
GPUs.
There was a deadlock between one thread trying to wait for a workqueue
job to finish in the runtime suspend path, and the workqueue job it
was waiting for in turn waiting for a runtime_get_sync to return.
The fixes avoids it by not doing the runtime sync in the workqueue as
then we always wait for all those tasks to complete before we runtime
suspend"
* tag 'drm-fixes-for-v4.16-rc3' of git://people.freedesktop.org/~airlied/linux: (25 commits)
drm/tve200: fix kernel-doc documentation comment include
drm/edid: quirk Sony PlayStation VR headset as non-desktop
drm/edid: quirk Windows Mixed Reality headsets as non-desktop
drm/edid: quirk Oculus Rift headsets as non-desktop
drm/meson: fix vsync buffer update
drm: Handle unexpected holes in color-eviction
drm: exynos: Use proper macro definition for HDMI_I2S_PIN_SEL_1
drm/exynos: remove exynos_drm_rotator.h
drm/exynos: g2d: Delete an error message for a failed memory allocation in two functions
drm/exynos: fix comparison to bitshift when dealing with a mask
drm/exynos: g2d: use monotonic timestamps
drm/edid: Add 6 bpc quirk for CPT panel in Asus UX303LA
gpu: ipu-csi: add 10/12-bit grayscale support to mbus_code_to_bus_cfg
gpu: ipu-cpmem: add 16-bit grayscale support to ipu_cpmem_set_image
gpu: ipu-v3: prg: fix device node leak in ipu_prg_lookup_by_phandle
gpu: ipu-v3: pre: fix device node leak in ipu_pre_lookup_by_phandle
drm/amdgpu: Fix deadlock on runtime suspend
drm/radeon: Fix deadlock on runtime suspend
drm/nouveau: Fix deadlock on runtime suspend
drm: Allow determining if current task is output poll worker
...
Paolo Bonzini [Fri, 23 Feb 2018 18:06:16 +0000 (19:06 +0100)]
Merge tag 'kvm-s390-master-4.16-2' of git://git./linux/kernel/git/kvms390/linux into HEAD
KVM: s390: fixes for multiple epoch facility
We have certain cases where the multiple epoch facility is broken:
- timer wakeup during epoch change
- cpu hotplug
- SCK instruction
- stp sync checks
Fix those.
Paolo Bonzini [Fri, 23 Feb 2018 18:02:57 +0000 (19:02 +0100)]
Merge tag 'kvm-arm-fixes-for-v4.16-1' of git://git./linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/ARM Fixes for v4.16, Round 1
Fix the interaction of userspace irqchip VMs with in-kernl irqchip VMs
and make sure we can build 32-bit KVM/ARM with gcc-8.
Eric Dumazet [Fri, 23 Feb 2018 03:45:27 +0000 (19:45 -0800)]
net_sched: gen_estimator: fix broken estimators based on percpu stats
pfifo_fast got percpu stats lately, uncovering a bug I introduced last
year in linux-4.10.
I missed the fact that we have to clear our temporary storage
before calling __gnet_stats_copy_basic() in the case of percpu stats.
Without this fix, rate estimators (tc qd replace dev xxx root est 1sec
4sec pfifo_fast) are utterly broken.
Fixes:
1c0d32fde5bd ("net_sched: gen_estimator: complete rewrite of rate estimators")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 23 Feb 2018 17:34:18 +0000 (12:34 -0500)]
Merge git://git./pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says:
====================
pull-request: bpf 2018-02-22
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) two urgent fixes for bpf_tail_call logic for x64 and arm64 JITs, from Daniel.
2) cond_resched points in percpu array alloc/free paths, from Eric.
3) lockdep and other minor fixes, from Yonghong, Arnd, Anders, Li.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Spencer [Thu, 22 Feb 2018 19:05:33 +0000 (11:05 -0800)]
gianfar: simplify FCS handling and fix memory leak
Previously, buffer descriptors containing only the frame check sequence
(FCS) were skipped and not added to the skb. However, the page reference
count was still incremented, leading to a memory leak.
Fixing this inside gfar_add_rx_frag() is difficult due to reserved
memory handling and page reuse. Instead, move the FCS handling to
gfar_process_frame() and trim off the FCS before passing the skb up the
networking stack.
Signed-off-by: Andy Spencer <aspencer@spacex.com>
Signed-off-by: Jim Gruen <jgruen@spacex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Thu, 22 Feb 2018 15:55:34 +0000 (16:55 +0100)]
ipv6 sit: work around bogus gcc-8 -Wrestrict warning
gcc-8 has a new warning that detects overlapping input and output arguments
in memcpy(). It triggers for sit_init_net() calling ipip6_tunnel_clone_6rd(),
which is actually correct:
net/ipv6/sit.c: In function 'sit_init_net':
net/ipv6/sit.c:192:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict]
The problem here is that the logic detecting the memcpy() arguments finds them
to be the same, but the conditional that tests for the input and output of
ipip6_tunnel_clone_6rd() to be identical is not a compile-time constant.
We know that netdev_priv(t->dev) is the same as t for a tunnel device,
and comparing "dev" directly here lets the compiler figure out as well
that 'dev == sitn->fb_tunnel_dev' when called from sit_init_net(), so
it no longer warns.
This code is old, so Cc stable to make sure that we don't get the warning
for older kernels built with new gcc.
Cc: Martin Sebor <msebor@gmail.com>
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83456
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexey Kodanev [Thu, 22 Feb 2018 15:20:30 +0000 (18:20 +0300)]
macvlan: fix use-after-free in macvlan_common_newlink()
The following use-after-free was reported by KASan when running
LTP macvtap01 test on 4.16-rc2:
[10642.528443] BUG: KASAN: use-after-free in
macvlan_common_newlink+0x12ef/0x14a0 [macvlan]
[10642.626607] Read of size 8 at addr
ffff880ba49f2100 by task ip/18450
...
[10642.963873] Call Trace:
[10642.994352] dump_stack+0x5c/0x7c
[10643.035325] print_address_description+0x75/0x290
[10643.092938] kasan_report+0x28d/0x390
[10643.137971] ? macvlan_common_newlink+0x12ef/0x14a0 [macvlan]
[10643.207963] macvlan_common_newlink+0x12ef/0x14a0 [macvlan]
[10643.275978] macvtap_newlink+0x171/0x260 [macvtap]
[10643.334532] rtnl_newlink+0xd4f/0x1300
...
[10646.256176] Allocated by task 18450:
[10646.299964] kasan_kmalloc+0xa6/0xd0
[10646.343746] kmem_cache_alloc_trace+0xf1/0x210
[10646.397826] macvlan_common_newlink+0x6de/0x14a0 [macvlan]
[10646.464386] macvtap_newlink+0x171/0x260 [macvtap]
[10646.522728] rtnl_newlink+0xd4f/0x1300
...
[10647.022028] Freed by task 18450:
[10647.061549] __kasan_slab_free+0x138/0x180
[10647.111468] kfree+0x9e/0x1c0
[10647.147869] macvlan_port_destroy+0x3db/0x650 [macvlan]
[10647.211411] rollback_registered_many+0x5b9/0xb10
[10647.268715] rollback_registered+0xd9/0x190
[10647.319675] register_netdevice+0x8eb/0xc70
[10647.370635] macvlan_common_newlink+0xe58/0x14a0 [macvlan]
[10647.437195] macvtap_newlink+0x171/0x260 [macvtap]
Commit
d02fd6e7d293 ("macvlan: Fix one possible double free") handles
the case when register_netdevice() invokes ndo_uninit() on error and
as a result free the port. But 'macvlan_port_get_rtnl(dev))' check
(returns dev->rx_handler_data), which was added by this commit in order
to prevent double free, is not quite correct:
* for macvlan it always returns NULL because 'lowerdev' is the one that
was used to register rx handler (port) in macvlan_port_create() as
well as to unregister it in macvlan_port_destroy().
* for macvtap it always returns a valid pointer because macvtap registers
its own rx handler before macvlan_common_newlink().
Fixes:
d02fd6e7d293 ("macvlan: Fix one possible double free")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pratyush Anand [Mon, 5 Feb 2018 13:28:01 +0000 (14:28 +0100)]
arm64: fix unwind_frame() for filtered out fn for function graph tracing
do_task_stat() calls get_wchan(), which further does unwind_frame().
unwind_frame() restores frame->pc to original value in case function
graph tracer has modified a return address (LR) in a stack frame to hook
a function return. However, if function graph tracer has hit a filtered
function, then we can't unwind it as ftrace_push_return_trace() has
biased the index(frame->graph) with a 'huge negative'
offset(-FTRACE_NOTRACE_DEPTH).
Moreover, arm64 stack walker defines index(frame->graph) as unsigned
int, which can not compare a -ve number.
Similar problem we can have with calling of walk_stackframe() from
save_stack_trace_tsk() or dump_backtrace().
This patch fixes unwind_frame() to test the index for -ve value and
restore index accordingly before we can restore frame->pc.
Reproducer:
cd /sys/kernel/debug/tracing/
echo schedule > set_graph_notrace
echo 1 > options/display-graph
echo wakeup > current_tracer
ps -ef | grep -i agent
Above commands result in:
Unable to handle kernel paging request at virtual address
ffff801bd3d1e000
pgd =
ffff8003cbe97c00
[
ffff801bd3d1e000] *pgd=
0000000000000000, *pud=
0000000000000000
Internal error: Oops:
96000006 [#1] SMP
[...]
CPU: 5 PID: 11696 Comm: ps Not tainted 4.11.0+ #33
[...]
task:
ffff8003c21ba000 task.stack:
ffff8003cc6c0000
PC is at unwind_frame+0x12c/0x180
LR is at get_wchan+0xd4/0x134
pc : [<
ffff00000808892c>] lr : [<
ffff0000080860b8>] pstate:
60000145
sp :
ffff8003cc6c3ab0
x29:
ffff8003cc6c3ab0 x28:
0000000000000001
x27:
0000000000000026 x26:
0000000000000026
x25:
00000000000012d8 x24:
0000000000000000
x23:
ffff8003c1c04000 x22:
ffff000008c83000
x21:
ffff8003c1c00000 x20:
000000000000000f
x19:
ffff8003c1bc0000 x18:
0000fffffc593690
x17:
0000000000000000 x16:
0000000000000001
x15:
0000b855670e2b60 x14:
0003e97f22cf1d0f
x13:
0000000000000001 x12:
0000000000000000
x11:
00000000e8f4883e x10:
0000000154f47ec8
x9 :
0000000070f367c0 x8 :
0000000000000000
x7 :
00008003f7290000 x6 :
0000000000000018
x5 :
0000000000000000 x4 :
ffff8003c1c03cb0
x3 :
ffff8003c1c03ca0 x2 :
00000017ffe80000
x1 :
ffff8003cc6c3af8 x0 :
ffff8003d3e9e000
Process ps (pid: 11696, stack limit = 0xffff8003cc6c0000)
Stack: (0xffff8003cc6c3ab0 to 0xffff8003cc6c4000)
[...]
[<
ffff00000808892c>] unwind_frame+0x12c/0x180
[<
ffff000008305008>] do_task_stat+0x864/0x870
[<
ffff000008305c44>] proc_tgid_stat+0x3c/0x48
[<
ffff0000082fde0c>] proc_single_show+0x5c/0xb8
[<
ffff0000082b27e0>] seq_read+0x160/0x414
[<
ffff000008289e6c>] __vfs_read+0x58/0x164
[<
ffff00000828b164>] vfs_read+0x88/0x144
[<
ffff00000828c2e8>] SyS_read+0x60/0xc0
[<
ffff0000080834a0>] __sys_trace_return+0x0/0x4
Fixes:
20380bb390a4 (arm64: ftrace: fix a stack tracer's output under function graph tracer)
Signed-off-by: Pratyush Anand <panand@redhat.com>
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
[catalin.marinas@arm.com: replace WARN_ON with WARN_ON_ONCE]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Anna Karbownik [Thu, 22 Feb 2018 15:18:13 +0000 (16:18 +0100)]
EDAC, sb_edac: Fix out of bound writes during DIMM configuration on KNL
Commit
3286d3eb906c ("EDAC, sb_edac: Drop NUM_CHANNELS from 8 back to 4")
decreased NUM_CHANNELS from 8 to 4, but this is not enough for Knights
Landing which supports up to 6 channels.
This caused out-of-bounds writes to pvt->mirror_mode and pvt->tolm
variables which don't pay critical role on KNL code path, so the memory
corruption wasn't causing any visible driver failures.
The easiest way of fixing it is to change NUM_CHANNELS to 6. Do that.
An alternative solution would be to restructure the KNL part of the
driver to 2MC/3channel representation.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Anna Karbownik <anna.karbownik@intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: jim.m.snow@intel.com
Cc: krzysztof.paliswiat@intel.com
Cc: lukasz.odzioba@intel.com
Cc: qiuxu.zhuo@intel.com
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Fixes:
3286d3eb906c ("EDAC, sb_edac: Drop NUM_CHANNELS from 8 back to 4")
Link: http://lkml.kernel.org/r/1519312693-4789-1-git-send-email-anna.karbownik@intel.com
[ Massage commit message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Samuel Neves [Wed, 21 Feb 2018 20:50:36 +0000 (20:50 +0000)]
x86/topology: Update the 'cpu cores' field in /proc/cpuinfo correctly across CPU hotplug operations
Without this fix, /proc/cpuinfo will display an incorrect amount
of CPU cores, after bringing them offline and online again, as
exemplified below:
$ cat /proc/cpuinfo | grep cores
cpu cores : 4
cpu cores : 8
cpu cores : 8
cpu cores : 20
cpu cores : 4
cpu cores : 3
cpu cores : 2
cpu cores : 2
This patch fixes this by always zeroing the booted_cores variable
upon turning off a logical CPU.
Tested-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: Samuel Neves <sneves@dei.uc.pt>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jgross@suse.com
Cc: luto@kernel.org
Cc: prarit@redhat.com
Cc: vkuznets@redhat.com
Link: http://lkml.kernel.org/r/20180221205036.5244-1-sneves@dei.uc.pt
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dou Liyang [Thu, 22 Feb 2018 08:48:12 +0000 (16:48 +0800)]
x86/topology: Fix function name in documentation
topology_sibling_cpumask() is the correct thread-related topology
function in the kernel:
s/topology_sibling_mask/topology_sibling_cpumask
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: corbet@lwn.net
Cc: linux-doc@vger.kernel.org
Link: http://lkml.kernel.org/r/20180222084812.14497-1-douly.fnst@cn.fujitsu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andrea Parri [Thu, 22 Feb 2018 09:24:48 +0000 (10:24 +0100)]
locking/xchg/alpha: Fix xchg() and cmpxchg() memory ordering bugs
Successful RMW operations are supposed to be fully ordered, but
Alpha's xchg() and cmpxchg() do not meet this requirement.
Will Deacon noticed the bug:
> So MP using xchg:
>
> WRITE_ONCE(x, 1)
> xchg(y, 1)
>
> smp_load_acquire(y) == 1
> READ_ONCE(x) == 0
>
> would be allowed.
... which thus violates the above requirement.
Fix it by adding a leading smp_mb() to the xchg() and cmpxchg() implementations.
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-alpha@vger.kernel.org
Link: http://lkml.kernel.org/r/1519291488-5752-1-git-send-email-parri.andrea@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andrea Parri [Thu, 22 Feb 2018 09:24:29 +0000 (10:24 +0100)]
locking/xchg/alpha: Clean up barrier usage by using smp_mb() in place of __ASM__MB
Replace each occurrence of __ASM__MB with a (trailing) smp_mb() in
xchg(), cmpxchg(), and remove the now unused __ASM__MB definitions;
this improves readability, with no additional synchronization cost.
Suggested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-alpha@vger.kernel.org
Link: http://lkml.kernel.org/r/1519291469-5702-1-git-send-email-parri.andrea@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Paolo Bonzini [Thu, 22 Feb 2018 15:43:18 +0000 (16:43 +0100)]
KVM/VMX: Optimize vmx_vcpu_run() and svm_vcpu_run() by marking the RDMSR path as unlikely()
vmx_vcpu_run() and svm_vcpu_run() are large functions, and giving
branch hints to the compiler can actually make a substantial cycle
difference by keeping the fast path contiguous in memory.
With this optimization, the retpoline-guest/retpoline-host case is
about 50 cycles faster.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: KarimAllah Ahmed <karahmed@amazon.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20180222154318.20361-3-pbonzini@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Paolo Bonzini [Thu, 22 Feb 2018 15:43:17 +0000 (16:43 +0100)]
KVM/x86: Remove indirect MSR op calls from SPEC_CTRL
Having a paravirt indirect call in the IBRS restore path is not a
good idea, since we are trying to protect from speculative execution
of bogus indirect branch targets. It is also slower, so use
native_wrmsrl() on the vmentry path too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: KarimAllah Ahmed <karahmed@amazon.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes:
d28b387fb74da95d69d2615732f50cceb38e9a4d
Link: http://lkml.kernel.org/r/20180222154318.20361-2-pbonzini@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Wang Hui [Fri, 23 Feb 2018 03:26:03 +0000 (19:26 -0800)]
x86/intel_rdt: Fix incorrect returned value when creating rdgroup sub-directory in resctrl file system
If no monitoring feature is detected because all monitoring features are
disabled during boot time or there is no monitoring feature in hardware,
creating rdtgroup sub-directory by "mkdir" command reports error:
mkdir: cannot create directory ‘/sys/fs/resctrl/p1’: No such file or directory
But the sub-directory actually is generated and content is correct:
cpus cpus_list schemata tasks
The error is because rdtgroup_mkdir_ctrl_mon() returns non zero value after
the sub-directory is created and the returned value is reported as an error
to user.
Clear the returned value to report to user that the sub-directory is
actually created successfully.
Signed-off-by: Wang Hui <john.wanghui@huawei.com>
Signed-off-by: Zhang Yanfei <yanfei.zhang@huawei.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi V Shankar <ravi.v.shankar@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vikas <vikas.shivappa@intel.com>
Cc: Xiaochen Shen <xiaochen.shen@intel.com>
Link: http://lkml.kernel.org/r/1519356363-133085-1-git-send-email-fenghua.yu@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Thu, 22 Feb 2018 11:08:06 +0000 (12:08 +0100)]
x86/apic/vector: Handle vector release on CPU unplug correctly
When a irq vector is replaced, then the previous vector is normally
released when the first interrupt happens on the new vector. If the target
CPU of the previous vector is already offline when the new vector is
installed, then the previous vector is silently discarded, which leads to
accounting issues causing suspend failures and other problems.
Adjust the logic so that the previous vector is freed in the underlying
matrix allocator to ensure that the accounting stays correct.
Fixes:
69cde0004a4b ("x86/vector: Use matrix allocator for vector assignment")
Reported-by: Yuriy Vostrikov <delamonpansie@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Yuriy Vostrikov <delamonpansie@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180222112316.930791749@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Michael Ellerman [Thu, 22 Feb 2018 13:00:11 +0000 (00:00 +1100)]
powerpc/powernv: Support firmware disable of RFI flush
Some versions of firmware will have a setting that can be configured
to disable the RFI flush, add support for it.
Fixes:
6e032b350cd1 ("powerpc/powernv: Check device-tree for RFI flush settings")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Thu, 22 Feb 2018 12:58:49 +0000 (23:58 +1100)]
powerpc/pseries: Support firmware disable of RFI flush
Some versions of firmware will have a setting that can be configured
to disable the RFI flush, add support for it.
Fixes:
8989d56878a7 ("powerpc/pseries: Query hypervisor for RFI flush settings")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Bharata B Rao [Wed, 21 Feb 2018 10:36:26 +0000 (16:06 +0530)]
powerpc/mm/drmem: Fix unexpected flag value in ibm,dynamic-memory-v2
Memory addtion and removal by count and indexed-count methods
temporarily mark the LMBs that are being added/removed by a special
flag value DRMEM_LMB_RESERVED. Accessing flags value directly at a few
places without proper accessor method is causing two unexpected
side-effects:
- DRMEM_LMB_RESERVED bit is becoming part of the flags word of
drconf_cell_v2 entries in ibm,dynamic-memory-v2 DT property.
- This results in extra drconf_cell entries in ibm,dynamic-memory-v2.
For example if 1G memory is added, it leads to one entry for 3 LMBs
and 1 separate entry for the last LMB. All the 4 LMBs should be
defined by one entry here.
Fix this by always accessing the flags by its accessor method
drmem_lmb_flags().
Fixes:
2b31e3aec1db ("powerpc/drmem: Add support for ibm, dynamic-memory-v2 property")
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Randy Dunlap [Tue, 13 Feb 2018 01:26:20 +0000 (17:26 -0800)]
integrity/security: fix digsig.c build error with header file
security/integrity/digsig.c has build errors on some $ARCH due to a
missing header file, so add it.
security/integrity/digsig.c:146:2: error: implicit declaration of function 'vfree' [-Werror=implicit-function-declaration]
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: linux-integrity@vger.kernel.org
Link: http://kisskb.ellerman.id.au/kisskb/head/13396/
Signed-off-by: James Morris <james.morris@microsoft.com>
James Morris [Fri, 23 Feb 2018 03:55:46 +0000 (19:55 -0800)]
Merge tag 'keys-fixes-
20180222-2' of https://git./linux/kernel/git/dhowells/linux-fs into fixes-v4.16-rc3
Keyrings fixes.
Dave Airlie [Fri, 23 Feb 2018 01:11:57 +0000 (11:11 +1000)]
Merge tag 'imx-drm-next-2018-02-22' of git://git.pengutronix.de/git/pza/linux into drm-fixes
drm/imx: ipu-v3 fixups and grayscale support
- Make const interrupt register arrays static, reduces object size.
- Fix device_node leaks in PRE/PRG phandle lookup functions.
- Add 8-bit and 16-bit grayscale buffer support to ipu_cpmem_set_image,
- add 10-bit and 12-bit grayscale media bus support to ipu-csi,
to be used by the imx-media driver.
* tag 'imx-drm-next-2018-02-22' of git://git.pengutronix.de/git/pza/linux:
gpu: ipu-csi: add 10/12-bit grayscale support to mbus_code_to_bus_cfg
gpu: ipu-cpmem: add 16-bit grayscale support to ipu_cpmem_set_image
gpu: ipu-v3: prg: fix device node leak in ipu_prg_lookup_by_phandle
gpu: ipu-v3: pre: fix device node leak in ipu_pre_lookup_by_phandle
gpu: ipu-cpmem: add 8-bit grayscale support to ipu_cpmem_set_image
gpu: ipu-v3: make const arrays int_reg static, shrinks object size
Kees Cook [Fri, 23 Feb 2018 00:59:26 +0000 (16:59 -0800)]
MIPS: boot: Define __ASSEMBLY__ for its.S build
The MIPS %.its.S compiler command did not define __ASSEMBLY__, which meant
when compiler_types.h was added to kconfig.h, unexpected things appeared
(e.g. struct declarations) which should not have been present. As done in
the general %.S compiler command, __ASSEMBLY__ is now included here too.
The failure was:
Error: arch/mips/boot/vmlinux.gz.its:201.1-2 syntax error
FATAL ERROR: Unable to parse input tree
/usr/bin/mkimage: Can't read arch/mips/boot/vmlinux.gz.itb.tmp: Invalid argument
/usr/bin/mkimage Can't add hashes to FIT blob
Reported-by: kbuild test robot <lkp@intel.com>
Fixes:
28128c61e08e ("kconfig.h: Include compiler types to avoid missed struct attributes")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 23 Feb 2018 01:04:06 +0000 (17:04 -0800)]
Merge branch 'siginfo-linus' of git://git./linux/kernel/git/ebiederm/user-namespace
Pull siginfo fix from Eric Biederman:
"This fixes a build error that only shows up on blackfin"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
fs/signalfd: fix build error for BUS_MCEERR_AR
Linus Torvalds [Fri, 23 Feb 2018 00:38:10 +0000 (16:38 -0800)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"Fix an oops in the s5p-sss driver when used with ecb(aes)"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: s5p-sss - Fix kernel Oops in AES-ECB mode
Daniel Borkmann [Fri, 23 Feb 2018 00:03:43 +0000 (01:03 +0100)]
bpf, arm64: fix out of bounds access in tail call
I recently noticed a crash on arm64 when feeding a bogus index
into BPF tail call helper. The crash would not occur when the
interpreter is used, but only in case of JIT. Output looks as
follows:
[ 347.007486] Unable to handle kernel paging request at virtual address
fffb850e96492510
[...]
[ 347.043065] [
fffb850e96492510] address between user and kernel address ranges
[ 347.050205] Internal error: Oops:
96000004 [#1] SMP
[...]
[ 347.190829] x13:
0000000000000000 x12:
0000000000000000
[ 347.196128] x11:
fffc047ebe782800 x10:
ffff808fd7d0fd10
[ 347.201427] x9 :
0000000000000000 x8 :
0000000000000000
[ 347.206726] x7 :
0000000000000000 x6 :
001c991738000000
[ 347.212025] x5 :
0000000000000018 x4 :
000000000000ba5a
[ 347.217325] x3 :
00000000000329c4 x2 :
ffff808fd7cf0500
[ 347.222625] x1 :
ffff808fd7d0fc00 x0 :
ffff808fd7cf0500
[ 347.227926] Process test_verifier (pid: 4548, stack limit = 0x000000007467fa61)
[ 347.235221] Call trace:
[ 347.237656] 0xffff000002f3a4fc
[ 347.240784] bpf_test_run+0x78/0xf8
[ 347.244260] bpf_prog_test_run_skb+0x148/0x230
[ 347.248694] SyS_bpf+0x77c/0x1110
[ 347.251999] el0_svc_naked+0x30/0x34
[ 347.255564] Code:
9100075a d280220a 8b0a002a d37df04b (
f86b694b)
[...]
In this case the index used in BPF r3 is the same as in r1
at the time of the call, meaning we fed a pointer as index;
here, it had the value 0xffff808fd7cf0500 which sits in x2.
While I found tail calls to be working in general (also for
hitting the error cases), I noticed the following in the code
emission:
# bpftool p d j i 988
[...]
38: ldr w10, [x1,x10]
3c: cmp w2, w10
40: b.ge 0x000000000000007c <-- signed cmp
44: mov x10, #0x20 // #32
48: cmp x26, x10
4c: b.gt 0x000000000000007c
50: add x26, x26, #0x1
54: mov x10, #0x110 // #272
58: add x10, x1, x10
5c: lsl x11, x2, #3
60: ldr x11, [x10,x11] <-- faulting insn (
f86b694b)
64: cbz x11, 0x000000000000007c
[...]
Meaning, the tests passed because commit
ddb55992b04d ("arm64:
bpf: implement bpf_tail_call() helper") was using signed compares
instead of unsigned which as a result had the test wrongly passing.
Change this but also the tail call count test both into unsigned
and cap the index as u32. Latter we did as well in
90caccdd8cc0
("bpf: fix bpf_tail_call() x64 JIT") and is needed in addition here,
too. Tested on HiSilicon Hi1616.
Result after patch:
# bpftool p d j i 268
[...]
38: ldr w10, [x1,x10]
3c: add w2, w2, #0x0
40: cmp w2, w10
44: b.cs 0x0000000000000080
48: mov x10, #0x20 // #32
4c: cmp x26, x10
50: b.hi 0x0000000000000080
54: add x26, x26, #0x1
58: mov x10, #0x110 // #272
5c: add x10, x1, x10
60: lsl x11, x2, #3
64: ldr x11, [x10,x11]
68: cbz x11, 0x0000000000000080
[...]
Fixes:
ddb55992b04d ("arm64: bpf: implement bpf_tail_call() helper")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Thu, 22 Feb 2018 14:12:53 +0000 (15:12 +0100)]
bpf, x64: implement retpoline for tail call
Implement a retpoline [0] for the BPF tail call JIT'ing that converts
the indirect jump via jmp %rax that is used to make the long jump into
another JITed BPF image. Since this is subject to speculative execution,
we need to control the transient instruction sequence here as well
when CONFIG_RETPOLINE is set, and direct it into a pause + lfence loop.
The latter aligns also with what gcc / clang emits (e.g. [1]).
JIT dump after patch:
# bpftool p d x i 1
0: (18) r2 = map[id:1]
2: (b7) r3 = 0
3: (85) call bpf_tail_call#12
4: (b7) r0 = 2
5: (95) exit
With CONFIG_RETPOLINE:
# bpftool p d j i 1
[...]
33: cmp %edx,0x24(%rsi)
36: jbe 0x0000000000000072 |*
38: mov 0x24(%rbp),%eax
3e: cmp $0x20,%eax
41: ja 0x0000000000000072 |
43: add $0x1,%eax
46: mov %eax,0x24(%rbp)
4c: mov 0x90(%rsi,%rdx,8),%rax
54: test %rax,%rax
57: je 0x0000000000000072 |
59: mov 0x28(%rax),%rax
5d: add $0x25,%rax
61: callq 0x000000000000006d |+
66: pause |
68: lfence |
6b: jmp 0x0000000000000066 |
6d: mov %rax,(%rsp) |
71: retq |
72: mov $0x2,%eax
[...]
* relative fall-through jumps in error case
+ retpoline for indirect jump
Without CONFIG_RETPOLINE:
# bpftool p d j i 1
[...]
33: cmp %edx,0x24(%rsi)
36: jbe 0x0000000000000063 |*
38: mov 0x24(%rbp),%eax
3e: cmp $0x20,%eax
41: ja 0x0000000000000063 |
43: add $0x1,%eax
46: mov %eax,0x24(%rbp)
4c: mov 0x90(%rsi,%rdx,8),%rax
54: test %rax,%rax
57: je 0x0000000000000063 |
59: mov 0x28(%rax),%rax
5d: add $0x25,%rax
61: jmpq *%rax |-
63: mov $0x2,%eax
[...]
* relative fall-through jumps in error case
- plain indirect jump as before
[0] https://support.google.com/faqs/answer/
7625886
[1] https://github.com/gcc-mirror/gcc/commit/
a31e654fa107be968b802786d747e962c2fcdb2b
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Thomas Gleixner [Thu, 22 Feb 2018 11:08:05 +0000 (12:08 +0100)]
genirq/matrix: Handle CPU offlining proper
At CPU hotunplug the corresponding per cpu matrix allocator is shut down and
the allocated interrupt bits are discarded under the assumption that all
allocated bits have been either migrated away or shut down through the
managed interrupts mechanism.
This is not true because interrupts which are not started up might have a
vector allocated on the outgoing CPU. When the interrupt is started up
later or completely shutdown and freed then the allocated vector is handed
back, triggering warnings or causing accounting issues which result in
suspend failures and other issues.
Change the CPU hotplug mechanism of the matrix allocator so that the
remaining allocations at unplug time are preserved and global accounting at
hotplug is correctly readjusted to take the dormant vectors into account.
Fixes:
2f75d9e1c905 ("genirq: Implement bitmap matrix allocator")
Reported-by: Yuriy Vostrikov <delamonpansie@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Yuriy Vostrikov <delamonpansie@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180222112316.849980972@linutronix.de
Randy Dunlap [Mon, 12 Feb 2018 21:18:38 +0000 (13:18 -0800)]
fs/signalfd: fix build error for BUS_MCEERR_AR
Fix build error in fs/signalfd.c by using same method that is used in
kernel/signal.c: separate blocks for different signal si_code values.
./fs/signalfd.c: error: 'BUS_MCEERR_AR' undeclared (first use in this function)
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
David Howells [Thu, 22 Feb 2018 14:38:14 +0000 (14:38 +0000)]
rxrpc: Fix send in rxrpc_send_data_packet()
All the kernel_sendmsg() calls in rxrpc_send_data_packet() need to send
both parts of the iov[] buffer, but one of them does not. Fix it so that
it does.
Without this, short IPv6 rxrpc DATA packets may be seen that have the rxrpc
header included, but no payload.
Fixes:
5a924b8951f8 ("rxrpc: Don't store the rxrpc header in the Tx queue sk_buffs")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Thu, 22 Feb 2018 09:11:55 +0000 (12:11 +0300)]
net: aquantia: Fix error handling in aq_pci_probe()
We should check "self->aq_hw" for allocation failure, and also we should
free it on the error paths.
Fixes:
23ee07ad3c2f ("net: aquantia: Cleanup pci functions module")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yonghong Song [Thu, 22 Feb 2018 18:10:35 +0000 (10:10 -0800)]
bpf: fix rcu lockdep warning for lpm_trie map_free callback
Commit
9a3efb6b661f ("bpf: fix memory leak in lpm_trie map_free callback function")
fixed a memory leak and removed unnecessary locks in map_free callback function.
Unfortrunately, it introduced a lockdep warning. When lockdep checking is turned on,
running tools/testing/selftests/bpf/test_lpm_map will have:
[ 98.294321] =============================
[ 98.294807] WARNING: suspicious RCU usage
[ 98.295359] 4.16.0-rc2+ #193 Not tainted
[ 98.295907] -----------------------------
[ 98.296486] /home/yhs/work/bpf/kernel/bpf/lpm_trie.c:572 suspicious rcu_dereference_check() usage!
[ 98.297657]
[ 98.297657] other info that might help us debug this:
[ 98.297657]
[ 98.298663]
[ 98.298663] rcu_scheduler_active = 2, debug_locks = 1
[ 98.299536] 2 locks held by kworker/2:1/54:
[ 98.300152] #0: ((wq_completion)"events"){+.+.}, at: [<
00000000196bc1f0>] process_one_work+0x157/0x5c0
[ 98.301381] #1: ((work_completion)(&map->work)){+.+.}, at: [<
00000000196bc1f0>] process_one_work+0x157/0x5c0
Since actual trie tree removal happens only after no other
accesses to the tree are possible, replacing
rcu_dereference_protected(*slot, lockdep_is_held(&trie->lock))
with
rcu_dereference_protected(*slot, 1)
fixed the issue.
Fixes:
9a3efb6b661f ("bpf: fix memory leak in lpm_trie map_free callback function")
Reported-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Eric Dumazet [Thu, 22 Feb 2018 16:33:24 +0000 (08:33 -0800)]
bpf: add schedule points in percpu arrays management
syszbot managed to trigger RCU detected stalls in
bpf_array_free_percpu()
It takes time to allocate a huge percpu map, but even more time to free
it.
Since we run in process context, use cond_resched() to yield cpu if
needed.
Fixes:
a10423b87a7e ("bpf: introduce BPF_MAP_TYPE_PERCPU_ARRAY map")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
David S. Miller [Thu, 22 Feb 2018 20:17:01 +0000 (15:17 -0500)]
Merge tag 'mac80211-for-davem-2018-02-22' of git://git./linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Various fixes across the tree, the shortlog basically says it all:
cfg80211: fix cfg80211_beacon_dup
-> old bug in this code
cfg80211: clear wep keys after disconnection
-> certain ways of disconnecting left the keys
mac80211: round IEEE80211_TX_STATUS_HEADROOM up to multiple of 4
-> alignment issues with using 14 bytes
mac80211: Do not disconnect on invalid operating class
-> if the AP has a bogus operating class, let it be
mac80211: Fix sending ADDBA response for an ongoing session
-> don't send the same frame twice
cfg80211: use only 1Mbps for basic rates in mesh
-> interop issue with old versions of our code
mac80211_hwsim: don't use WQ_MEM_RECLAIM
-> it causes splats because it flushes work on a non-reclaim WQ
regulatory: add NUL to request alpha2
-> nla_put_string() issue from Kees
mac80211: mesh: fix wrong mesh TTL offset calculation
-> protocol issue
mac80211: fix a possible leak of station stats
-> error path might leak memory
mac80211: fix calling sleeping function in atomic context
-> percpu allocations need to be made with gfp flags
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 22 Feb 2018 20:13:01 +0000 (12:13 -0800)]
Merge tag 'usb-4.16-rc3' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of USB fixes for 4.16-rc3
Nothing major, but a number of different fixes all over the place in
the USB stack for reported issues. Mostly gadget driver fixes,
although the typical set of xhci bugfixes are there, along with some
new quirks additions as well.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (39 commits)
Revert "usb: musb: host: don't start next rx urb if current one failed"
usb: musb: fix enumeration after resume
usb: cdc_acm: prevent race at write to acm while system resumes
Add delay-init quirk for Corsair K70 RGB keyboards
usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks()
usb: host: ehci: always enable interrupt for qtd completion at test mode
usb: ldusb: add PIDs for new CASSY devices supported by this driver
usb: renesas_usbhs: missed the "running" flag in usb_dmac with rx path
usb: host: ehci: use correct device pointer for dma ops
usbip: keep usbip_device sockfd state in sync with tcp_socket
ohci-hcd: Fix race condition caused by ohci_urb_enqueue() and io_watchdog_func()
USB: serial: option: Add support for Quectel EP06
xhci: fix xhci debugfs errors in xhci_stop
xhci: xhci debugfs device nodes weren't removed after device plugged out
xhci: Fix xhci debugfs devices node disappearance after hibernation
xhci: Fix NULL pointer in xhci debugfs
xhci: Don't print a warning when setting link state for disabled ports
xhci: workaround for AMD Promontory disabled ports wakeup
usb: dwc3: core: Fix ULPI PHYs and prevent phy_get/ulpi_init during suspend/resume
USB: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe()
...
Linus Torvalds [Thu, 22 Feb 2018 20:05:43 +0000 (12:05 -0800)]
Merge tag 'staging-4.16-rc2' of git://git./linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Greg KH:
"Here are a small number of staging and iio driver fixes for 4.16-rc2.
The IIO fixes are all for reported things, and the android driver
fixes also resolve some reported problems. The remaining fsl-mc
Kconfig change resolves a build testing error that Arnd reported.
All of these have been in linux-next with no reported issues"
* tag 'staging-4.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: buffer: check if a buffer has been set up when poll is called
iio: adis_lib: Initialize trigger before requesting interrupt
staging: android: ion: Zero CMA allocated memory
staging: android: ashmem: Fix a race condition in pin ioctls
staging: fsl-mc: fix build testing on x86
iio: srf08: fix link error "devm_iio_triggered_buffer_setup" undefined
staging: iio: ad5933: switch buffer mode to software
iio: adc: stm32: fix stm32h7_adc_enable error handling
staging: iio: adc: ad7192: fix external frequency setting
iio: adc: aspeed: Fix error handling path
Linus Torvalds [Thu, 22 Feb 2018 20:04:05 +0000 (12:04 -0800)]
Merge tag 'char-misc-4.16-rc3' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a handful of char/misc driver fixes for 4.16-rc3.
There are some binder driver fixes to resolve reported issues in
stress testing the recent binder changes, some extcon driver fixes,
and a few mei driver fixes and new device ids.
All of these, with the exception of the mei driver id additions, have
been in linux-next for a while. I forgot to push out the mei driver id
additions to kernel.org until today, but all build tests pass with
them enabled"
* tag 'char-misc-4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: me: add cannon point device ids for 4th device
mei: me: add cannon point device ids
mei: set device client to the disconnected state upon suspend.
ANDROID: binder: synchronize_rcu() when using POLLFREE.
binder: replace "%p" with "%pK"
ANDROID: binder: remove WARN() for redundant txn error
binder: check for binder_thread allocation failure in binder_poll()
extcon: int3496: process id-pin first so that we start with the right status
Revert "extcon: axp288: Redo charger type detection a couple of seconds after probe()"
extcon: axp288: Constify the axp288_pwr_up_down_info array
Johannes Berg [Thu, 22 Feb 2018 19:55:28 +0000 (20:55 +0100)]
regulatory: add NUL to request alpha2
Similar to the ancient commit
a5fe8e7695dc ("regulatory: add NUL
to alpha2"), add another byte to alpha2 in the request struct so
that when we use nla_put_string(), we don't overrun anything.
Fixes:
73d54c9e74c4 ("cfg80211: add regulatory netlink multicast group")
Reported-by: Kees Cook <keescook@google.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Linus Torvalds [Thu, 22 Feb 2018 19:57:39 +0000 (11:57 -0800)]
Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma
Pull rdma fixes from Doug Ledford:
"Nothing in this is overly interesting, it's mostly your garden variety
fixes.
There was some work in this merge cycle around the new ioctl kABI, so
there are fixes in here related to that (probably with more to come).
We've also recently added new netlink support with a goal of moving
the primary means of configuring the entire subsystem to netlink
(eventually, this is a long term project), so there are fixes for
that.
Then a few bnxt_re driver fixes, and a few minor WARN_ON removals, and
that covers this pull request. There are already a few more fixes on
the list as of this morning, so there will certainly be more to come
in this rc cycle ;-)
Summary:
- Lots of fixes for the new IOCTL interface and general uverbs flow.
Found through testing and syzkaller
- Bugfixes for the new resource track netlink reporting
- Remove some unneeded WARN_ONs that were triggering for some users
in IPoIB
- Various fixes for the bnxt_re driver"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (27 commits)
RDMA/uverbs: Fix kernel panic while using XRC_TGT QP type
RDMA/bnxt_re: Avoid system hang during device un-reg
RDMA/bnxt_re: Fix system crash during load/unload
RDMA/bnxt_re: Synchronize destroy_qp with poll_cq
RDMA/bnxt_re: Unpin SQ and RQ memory if QP create fails
RDMA/bnxt_re: Disable atomic capability on bnxt_re adapters
RDMA/restrack: don't use uaccess_kernel()
RDMA/verbs: Check existence of function prior to accessing it
RDMA/vmw_pvrdma: Fix usage of user response structures in ABI file
RDMA/uverbs: Sanitize user entered port numbers prior to access it
RDMA/uverbs: Fix circular locking dependency
RDMA/uverbs: Fix bad unlock balance in ib_uverbs_close_xrcd
RDMA/restrack: Increment CQ restrack object before committing
RDMA/uverbs: Protect from command mask overflow
IB/uverbs: Fix unbalanced unlock on error path for rdma_explicit_destroy
IB/uverbs: Improve lockdep_check
RDMA/uverbs: Protect from races between lookup and destroy of uobjects
IB/uverbs: Hold the uobj write lock after allocate
IB/uverbs: Fix possible oops with duplicate ioctl attributes
IB/uverbs: Add ioctl support for 32bit processes
...
Linus Torvalds [Thu, 22 Feb 2018 19:53:17 +0000 (11:53 -0800)]
Merge tag 'riscv-for-linus-4.16-rc3-riscv_cleanups' of git://git./linux/kernel/git/palmer/riscv-linux
Pull RISC-V cleanups from Palmer Dabbelt:
"This contains a handful of small cleanups.
The only functional change is that IRQs are now enabled during
exception handling, which was found when some warnings triggered with
`CONFIG_DEBUG_ATOMIC_SLEEP=y`.
The remaining fixes should have no functional change: `sbi_save()` has
been renamed to `parse_dtb()` reflect what it actually does, and a
handful of unused Kconfig entries have been removed"
* tag 'riscv-for-linus-4.16-rc3-riscv_cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
Rename sbi_save to parse_dtb to improve code readability
RISC-V: Enable IRQ during exception handling
riscv: Remove ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select
riscv: kconfig: Remove RISCV_IRQ_INTC select
riscv: Remove ARCH_WANT_OPTIONAL_GPIOLIB select
Thomas Falcon [Thu, 22 Feb 2018 00:18:30 +0000 (18:18 -0600)]
ibmvnic: Fix early release of login buffer
The login buffer is released before the driver can perform
sanity checks between resources the driver requested and what
firmware will provide. Don't release the login buffer until
the sanity check is performed.
Fixes:
34f0f4e3f488 ("ibmvnic: Fix login buffer memory leaks")
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Finn Thain [Wed, 21 Feb 2018 22:24:59 +0000 (09:24 +1100)]
net/smc9194: Remove bogus CONFIG_MAC reference
AFAIK the only version of smc9194.c with Mac support is the one in the
linux-mac68k CVS repo, which never made it to the mainline.
Despite that, from v2.3.45, arch/m68k/config.in listed CONFIG_SMC9194
under CONFIG_MAC. This mistake got carried over into Kconfig in v2.5.55.
(See pre-git era "[PATCH] add m68k dependencies to net driver config".)
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Wed, 21 Feb 2018 19:00:54 +0000 (11:00 -0800)]
net: ipv4: Set addr_type in hash_keys for forwarded case
The result of the skb flow dissect is copied from keys to hash_keys to
ensure only the intended data is hashed. The original L4 hash patch
overlooked setting the addr_type for this case; add it.
Fixes:
bf4e0a3db97eb ("net: ipv4: add support for ECMP hash policy choice")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 21 Feb 2018 14:43:03 +0000 (06:43 -0800)]
tcp_bbr: better deal with suboptimal GSO
BBR uses tcp_tso_autosize() in an attempt to probe what would be the
burst sizes and to adjust cwnd in bbr_target_cwnd() with following
gold formula :
/* Allow enough full-sized skbs in flight to utilize end systems. */
cwnd += 3 * bbr->tso_segs_goal;
But GSO can be lacking or be constrained to very small
units (ip link set dev ... gso_max_segs 2)
What we really want is to have enough packets in flight so that both
GSO and GRO are efficient.
So in the case GSO is off or downgraded, we still want to have the same
number of packets in flight as if GSO/TSO was fully operational, so
that GRO can hopefully be working efficiently.
To fix this issue, we make tcp_tso_autosize() unaware of
sk->sk_gso_max_segs
Only tcp_tso_segs() has to enforce the gso_max_segs limit.
Tested:
ethtool -K eth0 tso off gso off
tc qd replace dev eth0 root pfifo_fast
Before patch:
for f in {1..5}; do ./super_netperf 1 -H lpaa24 -- -K bbr; done
691 (ss -temoi shows cwnd is stuck around 6 )
667
651
631
517
After patch :
# for f in {1..5}; do ./super_netperf 1 -H lpaa24 -- -K bbr; done
1733 (ss -temoi shows cwnd is around 386 )
1778
1746
1781
1718
Fixes:
0f8782ea1497 ("tcp_bbr: add BBR congestion control")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 21 Feb 2018 05:42:26 +0000 (21:42 -0800)]
smsc75xx: fix smsc75xx_set_features()
If an attempt is made to disable RX checksums, USB adapter is changed
but netdev->features is not, because smsc75xx_set_features() returns a
non zero value.
This throws errors from netdev_rx_csum_fault() :
<devname>: hw csum failure
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason A. Donenfeld [Wed, 21 Feb 2018 03:41:59 +0000 (04:41 +0100)]
netlink: put module reference if dump start fails
Before, if cb->start() failed, the module reference would never be put,
because cb->cb_running is intentionally false at this point. Users are
generally annoyed by this because they can no longer unload modules that
leak references. Also, it may be possible to tediously wrap a reference
counter back to zero, especially since module.c still uses atomic_inc
instead of refcount_inc.
This patch expands the error path to simply call module_put if
cb->start() fails.
Fixes:
41c87425a1ac ("netlink: do not set cb_running if dump's start() errs")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
James Morris [Thu, 22 Feb 2018 18:50:24 +0000 (10:50 -0800)]
Merge tag 'seccomp-v4.16-rc3' of https://git./linux/kernel/git/kees/linux into fixes-v4.16-rc3
- Fix seccomp GET_METADATA to deal with field sizes correctly (Tycho Andersen)
- Add selftest to make sure GET_METADATA doesn't regress (Tycho Andersen)
Linus Torvalds [Thu, 22 Feb 2018 18:45:46 +0000 (10:45 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"16 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: don't defer struct page initialization for Xen pv guests
lib/Kconfig.debug: enable RUNTIME_TESTING_MENU
vmalloc: fix __GFP_HIGHMEM usage for vmalloc_32 on 32b systems
selftests/memfd: add run_fuse_test.sh to TEST_FILES
bug.h: work around GCC PR82365 in BUG()
mm/swap.c: make functions and their kernel-doc agree (again)
mm/zpool.c: zpool_evictable: fix mismatch in parameter name and kernel-doc
ida: do zeroing in ida_pre_get()
mm, swap, frontswap: fix THP swap if frontswap enabled
certs/blacklist_nohashes.c: fix const confusion in certs blacklist
kernel/relay.c: limit kmalloc size to KMALLOC_MAX_SIZE
mm, mlock, vmscan: no more skipping pagevecs
mm: memcontrol: fix NR_WRITEBACK leak in memcg and system stats
Kbuild: always define endianess in kconfig.h
include/linux/sched/mm.h: re-inline mmdrop()
tools: fix cross-compile var clobbering
Luck, Tony [Thu, 22 Feb 2018 17:15:06 +0000 (09:15 -0800)]
efivarfs: Limit the rate for non-root to read files
Each read from a file in efivarfs results in two calls to EFI
(one to get the file size, another to get the actual data).
On X86 these EFI calls result in broadcast system management
interrupts (SMI) which affect performance of the whole system.
A malicious user can loop performing reads from efivarfs bringing
the system to its knees.
Linus suggested per-user rate limit to solve this.
So we add a ratelimit structure to "user_struct" and initialize
it for the root user for no limit. When allocating user_struct for
other users we set the limit to 100 per second. This could be used
for other places that want to limit the rate of some detrimental
user action.
In efivarfs if the limit is exceeded when reading, we take an
interruptible nap for 50ms and check the rate limit again.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kees Cook [Thu, 22 Feb 2018 17:41:40 +0000 (09:41 -0800)]
kconfig.h: Include compiler types to avoid missed struct attributes
The header files for some structures could get included in such a way
that struct attributes (specifically __randomize_layout from path.h) would
be parsed as variable names instead of attributes. This could lead to
some instances of a structure being unrandomized, causing nasty GPFs, etc.
This patch makes sure the compiler_types.h header is included in
kconfig.h so that we've always got types and struct attributes defined,
since kconfig.h is included from the compiler command line.
Reported-by: Patrick McLean <chutzpah@gentoo.org>
Root-caused-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Fixes:
3859a271a003 ("randstruct: Mark various structs for randomization")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>