OSDN Git Service
Anubhav Gupta [Wed, 10 Jun 2015 22:47:44 +0000 (22:47 +0000)]
am
b9851818: Disable SCMST feature for A2DP Sink
* commit '
b9851818bfce9f8d4ac2fb16c1f6cf23cb76f17a':
Disable SCMST feature for A2DP Sink
Mallikarjuna GB [Wed, 10 Jun 2015 22:47:43 +0000 (22:47 +0000)]
am
9b6dfa44: Restarting PM timer for AG while reading OR writing
* commit '
9b6dfa44d027e093d38ea7b1a402f0b0c00b6e28':
Restarting PM timer for AG while reading OR writing
Mallikarjuna GB [Wed, 10 Jun 2015 22:47:42 +0000 (22:47 +0000)]
am
b92ab7d8: Initialize btif_max_hf_clients with proper value
* commit '
b92ab7d8d5154b9539cf3a5355a0adc1d736773a':
Initialize btif_max_hf_clients with proper value
Anubhav Gupta [Wed, 10 Jun 2015 22:47:42 +0000 (22:47 +0000)]
am
9c264e92: Set the proper authentication level for AvOpen
* commit '
9c264e92305f84a5e8a92bc859812def0ce71792':
Set the proper authentication level for AvOpen
Mallikarjuna GB [Wed, 10 Jun 2015 22:47:41 +0000 (22:47 +0000)]
am
6b359689: Don\'t open SCO for 2nd MO call if a call is active
* commit '
6b359689a482fae92f26aae6252fddfc296aaabf':
Don't open SCO for 2nd MO call if a call is active
Mallikarjuna GB [Wed, 10 Jun 2015 22:47:40 +0000 (22:47 +0000)]
am
4f51fc36: Don\'t close SCO for MO calls
* commit '
4f51fc3650873535d20e4cf00da68d723c1378b6':
Don't close SCO for MO calls
Mallikarjuna GB [Wed, 10 Jun 2015 22:47:39 +0000 (22:47 +0000)]
am
684d1364: (-s ours) SCO connection should happen after SLC.
* commit '
684d136447a93311a7ebd2e6daf931b77e802120':
SCO connection should happen after SLC.
Andre Eisenbach [Wed, 10 Jun 2015 22:42:02 +0000 (22:42 +0000)]
am
c1c02ce5: Fix compile error in bta_ag_sco.c
* commit '
c1c02ce58f8513ab1c6ab3010be4867c22b3b5c6':
Fix compile error in bta_ag_sco.c
Mallikarjuna GB [Wed, 10 Jun 2015 22:42:02 +0000 (22:42 +0000)]
am
8f4fb27a: (-s ours) Create listen SCO for HS1 if HS2 disconnects during SCO xfer
* commit '
8f4fb27a66a83cc65eb7923b6912d0aaba279a8b':
Create listen SCO for HS1 if HS2 disconnects during SCO xfer
Mallikarjuna GB [Wed, 10 Jun 2015 22:36:04 +0000 (22:36 +0000)]
am
39b9f827: Don\'t open SCO on state change for multi party call on DUT.
* commit '
39b9f827e1f9f0599070928465f84b69c4d5dfc0':
Don't open SCO on state change for multi party call on DUT.
Mallikarjuna GB [Wed, 10 Jun 2015 22:36:04 +0000 (22:36 +0000)]
am
9900b499: Reset sniff subrating while in SCO
* commit '
9900b49968297aa15872a9b7ef3a258ecf48cf1b':
Reset sniff subrating while in SCO
Mallikarjuna GB [Wed, 10 Jun 2015 22:36:03 +0000 (22:36 +0000)]
am
fafa2e20: Open SCO for held call.
* commit '
fafa2e20a8b56ab8320adebce2c6dc93d01801c5':
Open SCO for held call.
Mallikarjuna GB [Wed, 10 Jun 2015 22:36:02 +0000 (22:36 +0000)]
am
8885d6f4: Update call state before opening SCO.
* commit '
8885d6f4ea0aca5e97a5f405434d4494c5e41b85':
Update call state before opening SCO.
Mallikarjuna GB [Wed, 10 Jun 2015 22:36:01 +0000 (22:36 +0000)]
am
616e7417: Handle multi party call states
* commit '
616e7417c9520db24adf20b7c0aaf967ce6e106d':
Handle multi party call states
Mallikarjuna GB [Wed, 10 Jun 2015 22:35:59 +0000 (22:35 +0000)]
am
06c0eca5: Update held call state to connected headset
* commit '
06c0eca504910115020b86676fae60bb171b7a47':
Update held call state to connected headset
Pavlin Radoslavov [Wed, 10 Jun 2015 22:35:58 +0000 (22:35 +0000)]
am
eae61663: Replace malloc/calloc/free with osi_malloc/osi_calloc/osi_free
* commit '
eae61663a5c44f2a5757ae3df80cbc3b97fa6d60':
Replace malloc/calloc/free with osi_malloc/osi_calloc/osi_free
Sunny Kapdi [Wed, 10 Jun 2015 22:35:57 +0000 (22:35 +0000)]
am
cf8fb474: Fix memory corruption due to BLE multi-adv macro
* commit '
cf8fb474b12660ee799ded5b60e4654c8f3ffe13':
Fix memory corruption due to BLE multi-adv macro
Hemant Gupta [Wed, 10 Jun 2015 22:35:56 +0000 (22:35 +0000)]
am
38798e1b: HID: Handle closing of uhid driver in case failure
* commit '
38798e1b7cc7873aa849c3c7c58902f713d909be':
HID: Handle closing of uhid driver in case failure
Srinu Jella [Wed, 10 Jun 2015 22:35:54 +0000 (22:35 +0000)]
am
065a3e20: Reset pairing state to idle only for the current device
* commit '
065a3e209f5dae24bc7c21bf2659e9ccef23ebf1':
Reset pairing state to idle only for the current device
Pavlin Radoslavov [Wed, 10 Jun 2015 22:35:53 +0000 (22:35 +0000)]
am
0933b407: Moved the OSI alarm_shutdown() operations to alarm_cleanup()
* commit '
0933b4075e16589a073e85d8230677238b29b780':
Moved the OSI alarm_shutdown() operations to alarm_cleanup()
Pavlin Radoslavov [Wed, 10 Jun 2015 22:35:52 +0000 (22:35 +0000)]
am
5febd64b: Disable the OSI allocation tracker.
* commit '
5febd64b95260672d41964337377fb312ea2c07b':
Disable the OSI allocation tracker.
Srinu Jella [Wed, 10 Jun 2015 22:35:51 +0000 (22:35 +0000)]
am
8fb547c7: Handle pairing timeout during remote name request
* commit '
8fb547c7313644044c3d4ce38d68a2ad80f2d6c8':
Handle pairing timeout during remote name request
Andre Eisenbach [Wed, 10 Jun 2015 22:35:51 +0000 (22:35 +0000)]
am
73022dcd: Reduce GATT log verbosity
* commit '
73022dcde0411cb5a5684aaa78554c698916d4af':
Reduce GATT log verbosity
Srinu Jella [Wed, 10 Jun 2015 22:35:50 +0000 (22:35 +0000)]
am
3c67f057: Avoid null pointer exception for invalid L2CAP channels
* commit '
3c67f057825cafc1476559fdd15874db72deb217':
Avoid null pointer exception for invalid L2CAP channels
Pavlin Radoslavov [Wed, 10 Jun 2015 22:35:49 +0000 (22:35 +0000)]
am
7dac79e3: (-s ours) Add missing clean_up step for the OSI module.
* commit '
7dac79e3614a7956637b7dd294cf9f38afcf09f4':
Add missing clean_up step for the OSI module.
Hemant Gupta [Wed, 10 Jun 2015 22:16:53 +0000 (22:16 +0000)]
am
527c9fe7: Sniff: Use correct sniff configuration for PAN & HS
* commit '
527c9fe7f49c171713e227610ed8829eaa2dac05':
Sniff: Use correct sniff configuration for PAN & HS
Andre Eisenbach [Wed, 10 Jun 2015 22:16:44 +0000 (22:16 +0000)]
am
b5c8e291: Make secure connections mode configurable
* commit '
b5c8e291dcac7d45e4788a10ade8200d67e44786':
Make secure connections mode configurable
Prerepa Viswanadham [Wed, 10 Jun 2015 22:16:42 +0000 (22:16 +0000)]
am
579fa2a9: Increase the min LE connection interval to 11.25ms
* commit '
579fa2a950f21f3e5808a2d060afebbf5e8f0732':
Increase the min LE connection interval to 11.25ms
Satya Calloji [Wed, 10 Jun 2015 22:16:41 +0000 (22:16 +0000)]
am
0b469db5: Pairing is prompted with a wrong bd-address
* commit '
0b469db5e4991a1de0250fbeaca16ebd82f9470b':
Pairing is prompted with a wrong bd-address
Andre Eisenbach [Wed, 10 Jun 2015 22:16:40 +0000 (22:16 +0000)]
am
c09540f7: Fix problem where multi-adv instances cannot be re-used
* commit '
c09540f7f5dc712fda7e2179602514c0738092b6':
Fix problem where multi-adv instances cannot be re-used
Nitin Arora [Wed, 10 Jun 2015 22:16:38 +0000 (22:16 +0000)]
am
4c0e671b: Recitfy condition when removing device from IRK resolving list
* commit '
4c0e671b9a57504747a542544038ebb1abf296e4':
Recitfy condition when removing device from IRK resolving list
Andre Eisenbach [Wed, 10 Jun 2015 22:16:37 +0000 (22:16 +0000)]
am
a021a129: Fix build after cross-key issues broke non privacy enabled builds
* commit '
a021a12987c4257d137437c6de9438b3344c6f6b':
Fix build after cross-key issues broke non privacy enabled builds
Satya Calloji [Wed, 10 Jun 2015 22:16:36 +0000 (22:16 +0000)]
am
2808a249: (-s ours) Fix device/address types and IRK value handling
* commit '
2808a249c7fc1230eb8955481f94ea0e083165e4':
Fix device/address types and IRK value handling
Satya Calloji [Wed, 10 Jun 2015 22:10:14 +0000 (22:10 +0000)]
am
51a36d7e: Fixed cross key for LE when paired over BR-EDR
* commit '
51a36d7e1771bf0622898e6d1fc928028c400aaf':
Fixed cross key for LE when paired over BR-EDR
Satya Calloji [Wed, 10 Jun 2015 22:10:12 +0000 (22:10 +0000)]
am
8551d99a: Fix SMP pairing request issue on LE
* commit '
8551d99ac3947c36b867f84dd6ba3776e0aeb3a4':
Fix SMP pairing request issue on LE
Satya Calloji [Wed, 10 Jun 2015 22:10:11 +0000 (22:10 +0000)]
am
1f38e92c: Unpair the other transport on a device paired
* commit '
1f38e92c7045e92b6b9d7f31bf85ceb585733885':
Unpair the other transport on a device paired
Satya Calloji [Wed, 10 Jun 2015 22:10:10 +0000 (22:10 +0000)]
am
70b95989: (-s ours) Static address is seen on scanner after unpairing
* commit '
70b9598970e5b18ba53c282319e68faea6eb5681':
Static address is seen on scanner after unpairing
Satya Calloji [Wed, 10 Jun 2015 22:04:23 +0000 (22:04 +0000)]
am
3e46b830: (-s ours) Fix for chip capability version check
* commit '
3e46b83098196782328c339f5fe8021dc52172fc':
Fix for chip capability version check
Satya Calloji [Wed, 10 Jun 2015 21:58:31 +0000 (21:58 +0000)]
am
935324ab: (-s ours) LE low power scan feature
* commit '
935324abbe8706307297f09cf79bbcd4efb73367':
LE low power scan feature
Nitin Arora [Wed, 10 Jun 2015 21:51:50 +0000 (21:51 +0000)]
am
089651a3: Fix allocation for LE scan filter parameters
* commit '
089651a314c73f21964457d5d1b2d188e2243574':
Fix allocation for LE scan filter parameters
Nitin Arora [Wed, 10 Jun 2015 21:51:48 +0000 (21:51 +0000)]
am
19e91b0f: (-s ours) Fix for premature BLE RPA timeout
* commit '
19e91b0fe546478f6fb6572c8af7a5faa7559498':
Fix for premature BLE RPA timeout
Satya Calloji [Wed, 10 Jun 2015 21:44:34 +0000 (21:44 +0000)]
am
033edab9: Fix GATT connection failure after BT reset
* commit '
033edab9780481ca743d1f14cc893dc533c3c3f2':
Fix GATT connection failure after BT reset
Nitin Arora [Wed, 10 Jun 2015 21:44:33 +0000 (21:44 +0000)]
am
7557b674: Use correct structure to read LE connection handle
* commit '
7557b67434226e4baeee87ba86a7b85d1687de9a':
Use correct structure to read LE connection handle
Zach Johnson [Wed, 10 Jun 2015 21:44:32 +0000 (21:44 +0000)]
am
03583e8f: Build the shared library with --whole-archive
* commit '
03583e8f3161836f2bef56f59a6f7bb2db25e61f':
Build the shared library with --whole-archive
Satya Calloji [Wed, 10 Jun 2015 21:44:31 +0000 (21:44 +0000)]
am
350b0b0d: Fix for IRK and IR key write issue
* commit '
350b0b0d148ca9bf7cbf20018b47286165fa86e8':
Fix for IRK and IR key write issue
Andre Eisenbach [Wed, 10 Jun 2015 21:44:29 +0000 (21:44 +0000)]
am
fc9c9981: Re-enabled enhanced inquiry scan
* commit '
fc9c99817a6f3a951e3fc1ccdc48ebd2a54824a7':
Re-enabled enhanced inquiry scan
Chih-Hung Hsieh [Wed, 10 Jun 2015 21:44:28 +0000 (21:44 +0000)]
am
73378f5f: Fix format-security warning found by clang/llvm.
* commit '
73378f5fad7b2fc348073c313b226d0e1d5cfc12':
Fix format-security warning found by clang/llvm.
Andre Eisenbach [Wed, 10 Jun 2015 21:44:27 +0000 (21:44 +0000)]
am
8f1a16b1: Fix string template in connection event debug log
* commit '
8f1a16b13f8d11da9e783a64e1d38e8b20c10d6c':
Fix string template in connection event debug log
Andre Eisenbach [Wed, 10 Jun 2015 21:44:25 +0000 (21:44 +0000)]
am
40412562: (-s ours) Include osi_module reference in module_init funcion
* commit '
40412562707ee3f1fa104c4332bc6247880040a3':
Include osi_module reference in module_init funcion
Zach Johnson [Wed, 10 Jun 2015 21:37:20 +0000 (21:37 +0000)]
am
c6a1c261: (-s ours) Fix AlarmTestHarness so alarm tests pass again
* commit '
c6a1c261b87f194b298df01f002292d9e937ec75':
Fix AlarmTestHarness so alarm tests pass again
Andre Eisenbach [Wed, 10 Jun 2015 21:29:26 +0000 (21:29 +0000)]
am
cae219fe: (-s ours) Shutdown alarm callbacks on stack disable; added OSI module
* commit '
cae219fe70124f1fc39cd7a78c239c4870422d5d':
Shutdown alarm callbacks on stack disable; added OSI module
Anubhav Gupta [Thu, 19 Jun 2014 11:20:11 +0000 (16:50 +0530)]
Disable SCMST feature for A2DP Sink
Do not send SCMST enabled in GetCapabilities
for A2dp sink role.
Change-Id: I2bff7e04d852c6d3c8c1b7e1c41ae50ef3ff0543
Mallikarjuna GB [Fri, 22 May 2015 08:31:19 +0000 (14:01 +0530)]
Restarting PM timer for AG while reading OR writing
- Once AG receives any data(eg. AT commands) from
remote device(HF) and sending the response to remote
device, PM(Bluedroid power Manager) timer should be restarted
(stop & start) for AG.
- Increased the sniff timer value to 7 seconds for AV & AG
profiles to avoid sniff related IOT issues.
Change-Id: I8c1b79d272391b3fa34b193477a34d561f4c508d
Mallikarjuna GB [Thu, 21 May 2015 08:54:05 +0000 (14:24 +0530)]
Initialize btif_max_hf_clients with proper value
btif_max_hf_clients which is an unsigned 16bit integer is
initialized with -1(0xFFFF) in btif_hf.c. Later on, when
application calls init with max_hf_clients as 1, btif_max_hf_clients
will be set to 1. But, before this happens, context switch happened
from application context to btif context with btif_max_hf_clients as -1.
In the btif context, BTA_AgRegister gets called in for loop for 0xFFFF
times. We are running out of scbs due to this.
Initialize btif_max_hf_clients with 1. Assign it to max_hf_clients
before context switch happens.
Change-Id: Ibde1bebbab2eb64442027164236f1d82e4269d23
Anubhav Gupta [Mon, 14 Jul 2014 13:23:37 +0000 (18:53 +0530)]
Set the proper authentication level for AvOpen
During Avopen security was made none hence A2DP
connection was happening without bonding when
DUT is paired with DUT and then pairing entry
is deleted from remote and then only A2dp is
tried to be reconnected from DUT. A2dp appears
to be connected in this usecase but the device
entry is shown in available devices list instead
of paired one.
Changes made from No security to SEC Authenticate
Change-Id: I7fc39fe8acef874f0031c9b78d4269a62b94e4b0
Mallikarjuna GB [Fri, 19 Sep 2014 14:57:17 +0000 (20:27 +0530)]
Don't open SCO for 2nd MO call if a call is active
When user dials a 2nd call, do not open SCO if 1st call was
active on DUT earpiece or speaker.
Change-Id: I974f5bcf917e6972705e60cf1da195eae23f885a
Mallikarjuna GB [Tue, 28 Oct 2014 17:43:51 +0000 (23:13 +0530)]
Don't close SCO for MO calls
This change removes condition to disconnect SCO
when MO call process is started.
Change-Id: I2af4ab82c097c7d9ce1bc892bdf40cc09ff6d97e
Mudumba Ananth [Wed, 10 Jun 2015 21:21:51 +0000 (21:21 +0000)]
am
f4f744f7: Fix BT PAN crash by re-ordering callback initialization
* commit '
f4f744f7a9812e2dfd306382eab80c2caf25db37':
Fix BT PAN crash by re-ordering callback initialization
Mallikarjuna GB [Wed, 8 Oct 2014 08:31:16 +0000 (14:01 +0530)]
SCO connection should happen after SLC.
This change makes sure that SCO audio
connection request is not processed until
HFP SLC connection is done.
Change-Id: Ia2fcad49882deaaf049ae190d90442e5ca7ad71b
Andre Eisenbach [Thu, 4 Jun 2015 18:43:57 +0000 (11:43 -0700)]
Fix compile error in bta_ag_sco.c
Change-Id: I8839ba732560a31a5e8a2351ea4bfb16999cf5ea
Mallikarjuna GB [Thu, 21 May 2015 14:34:46 +0000 (20:04 +0530)]
Create listen SCO for HS1 if HS2 disconnects during SCO xfer
During SCO transfer process from HS1 to HS2, firstly active SCO for
HS1 is disconnected. However, if suddenly HS2 disconnects even
before SCO transfer is complete, listen SCO for HS1 is not created.
This causes further incoming SCO connections from HS1 to be rejected.
The change creates listen SCO for HS1 and moves SCO state properly
to LISTEN.
Change-Id: I0993c1ba1c24b3b7e9c243d179a913d7a0c40446
Mallikarjuna GB [Thu, 21 May 2015 14:20:27 +0000 (19:50 +0530)]
Don't open SCO on state change for multi party call on DUT.
When multi party calls(1 active, 1 held) are ongoing on phone
speaker and any of these call drops, do not open SCO for
other call since user expects call to still remain on phone
speaker.
Change-Id: I9079c809ac665fc1c6e890302e37d23a12f8d4f4
Mallikarjuna GB [Thu, 21 May 2015 13:11:03 +0000 (18:41 +0530)]
Reset sniff subrating while in SCO
Sniff subrating should not be used when link is
in SCO connection. Since the subrating value is
higher, the link would take more time to process
ACL data while in SCO connection causing unwanted
results like delay in SCO disconnects.
Change-Id: I7b964faa397624b65e0158209b8743efe13a6075
Mallikarjuna GB [Sat, 30 May 2015 17:25:18 +0000 (22:55 +0530)]
Open SCO for held call.
Use case:
1. Connect to headset/carkit
2. Make an outgoing call from AG
3. Turn off BT on AG
4. Hold the call from AG
5. Turn on BT on AG (No SCO link is established here)
6. Unhold call from AG (still no SCO link is established)
Failure:
No SCO connection established when held call is there
during headset connection.
Root cause:
SCO is not initiated when SLC is done during held call.
Fix:
AG opens SCO connection when HF connected while in call and
the call was in held state.
Change-Id: I63d7655d26ddbf68cbf94c745df745cffa917b5e
Mallikarjuna GB [Fri, 28 Nov 2014 04:51:15 +0000 (10:21 +0530)]
Update call state before opening SCO.
This change makes sure to update the current
call state before opening SCO connection when
incoming call is answered. Some car kits are
strict in checking this sequence and go in
bad state if not done this way.
Change-Id: Ie744dc26c02d897eaf016ee73022bfc2a0db067e
Mallikarjuna GB [Fri, 22 May 2015 06:26:48 +0000 (11:56 +0530)]
Handle multi party call states
UseCase:
1. Set up Bluetooth connection between phone and remote device.
2. Disconnect BT link by turning off remote device.
3. Start Mo call from phone.
4. Receive MT call from far end.
5. Turn on remote device.
6. BT connection gets established successfully, but audio
doesn't get transferred to headset.
Failure:
Call audio not routed to BT HS. SCO not established.
Root cause:
When a HS connects while in an active call and 2nd call
(incoming/outgoing/alerting) setup ongoing, incorrect post SLC
call setup updates might cause HS to get confused as phone had
already updated correct call states in CIND response during SLC.
This may cause HS to behave abnormally like delayed response to
BCS as seen with jabra wave +.
Fix:
Avoid sending incorrect call updates post SLC since we already
have sent correct updates during SLC as reponse to CIND.
Change-Id: I53e57baf7cca782af6f374a043667971c66a956d
Mallikarjuna GB [Thu, 21 May 2015 12:28:12 +0000 (17:58 +0530)]
Update held call state to connected headset
In a three way call scenario, when an active
call is dropped by remote, the single held call
state is not updated to the connected headset.
This change will make sure that it is updated
properly.
Change-Id: I558602e791279d510edb23989b125cd8f7a7ebde
Pavlin Radoslavov [Tue, 2 Jun 2015 20:54:58 +0000 (13:54 -0700)]
Replace malloc/calloc/free with osi_malloc/osi_calloc/osi_free
There were several leftover places that were still using
malloc/calloc/free .
Those are replaced to use osi_malloc/osi_calloc/osi_free like
majority of the rest of the code.
Note: There are few remaining places that are still using
malloc/calloc/free:
* Some of the unit tests
* audio_a2dp_hw/audio_a2dp_hw.c
It is used as part of the audio.a2dp.default.so library,
and the bluetooth.default.so library
Its usage of malloc/calloc/free should be refactored
independently.
Change-Id: Iafbed996e5f1ae8eb1343fb2acfadf32e515e419
Sunny Kapdi [Tue, 2 Jun 2015 05:21:28 +0000 (22:21 -0700)]
Fix memory corruption due to BLE multi-adv macro
INST_ID_IDX_MAX macro was not protected with parenthesis, resulting
in incorrect calculation of the size needed to allocate memory for
the client_if map.
Change-Id: Ib3591f4f9ac7288f2191e9078a71aab431ca7130
Hemant Gupta [Wed, 19 Nov 2014 13:39:54 +0000 (19:09 +0530)]
HID: Handle closing of uhid driver in case failure
This patch handles closure of the uhid driver in case of following:
- Due to concurrency of disconnection from a conencted device
and an incoming connection request from another device, the error
code for the ACL disconnection becomes HCI_ERR_HOST_REJECT_SECURITY
in the stack.
- On reception of disconnection with that error codes, the uhid driver
was not closed from the btif layer leading to issues in reconnection
with same device that got disconnected.
Change-Id: I13c83757051850cc631aa1c24a036a2e1a4d0087
Srinu Jella [Thu, 13 Nov 2014 11:52:28 +0000 (17:22 +0530)]
Reset pairing state to idle only for the current device
Reset the pair state during auth complete for the BD_ADDR of the pairing
device only. The authentication complete event may come for profile level
authetication also. In such cases, if device already in paired state,
there is no need to reset the pairing state.
Change-Id: Id0ef9127895177527a6d4559ad873aa1c62a56bb
Pavlin Radoslavov [Mon, 1 Jun 2015 23:08:18 +0000 (16:08 -0700)]
Moved the OSI alarm_shutdown() operations to alarm_cleanup()
Also, removed the OSI module's start_up and shut_down steps,
because now they are no-op.
Bug:
21558791
Change-Id: I24259b327f399af57c37937111158baa9704f644
Pavlin Radoslavov [Mon, 1 Jun 2015 18:42:39 +0000 (11:42 -0700)]
Disable the OSI allocation tracker.
Temporary disable the allocation tracker initialization
(even for BLUEDROID_DEBUG) when initializing Bluetooth.
This is a short-term workaround solution for several issues related to
the usage of the allocation tracker.
* Inconsistent usage of osi_malloc()/osi_calloc() and osi_free()
- Within some of the Bluetooth-related unit tests we have two copies
of the same libosi library: one copy statically linked against the
unit test, and another dlopen() at runtime as part of bluetooth.default.so
Each of those copy has its own static variables.
- For the dlopen() copy we do call allocation_tracker_init(), while for the
static copy within the unit test we don't call allocation_tracker_init()
- Occasionally, there is a memory allocation via osi_calloc()
within the dlopen()-ed library, and then it is osi_free()-ed
within the statically linked library.
Such (mis)usage creates issues in two ways: (1) free()-ing incorrect
pointer, and (2) the osi hash_map() in the dlopen()-ed library still considers
the osi-tracked memory as allocated.
NOTE: (1) could trigger random crashes, while (2) is the reason the unit
test triggers an assert
* Avoid potential issues that could result from the fact that calling
allocation_tracker_init() is not mandatory; i.e., the same
issue described above could be triggered if osi_malloc()/osi_callod()
was called before the call to allocation_tracker_init()
* There is still code that uses malloc(3)/calloc(3) and free(3) instead
of osi_malloc()/osi_calloc() and osi_free()
Also, add missing pthread_mutex_lock()/pthread_mutex_unlock() guards,
and fix the allocation_tracker_uninit() implementation so it works
properly even if void allocation_tracker_init() wasn't called.
Bug:
21561735
Change-Id: Ic83d6cd40af1189c4ee9c1dbfd0ad8e4666e1502
Srinu Jella [Wed, 8 Oct 2014 11:06:43 +0000 (16:36 +0530)]
Handle pairing timeout during remote name request
If a remote name request is in progress and a pairing timeout is
triggered, the host needs to post the bond failure to the UI and
needs to reset the pairing cb state, otherwise the UI will be stuck
in pairing mode and scanning won't work until Bluetooth is cycled
OFF->ON.
Change-Id: I76d9a83b1db7236db51617da998b5857b0de39f0
Andre Eisenbach [Thu, 28 May 2015 18:16:52 +0000 (11:16 -0700)]
Reduce GATT log verbosity
Change-Id: I55e6ec1afdd8a13f4401809ef89ef2d80efb7f66
Andre Eisenbach [Wed, 10 Jun 2015 21:06:13 +0000 (21:06 +0000)]
am
1bd76059: (-s ours) Bluetooth native dumpsys logging support (2/5)
* commit '
1bd76059e72b7a0d54f6b325882f6eccd311f874':
Bluetooth native dumpsys logging support (2/5)
Srinu Jella [Fri, 30 May 2014 15:45:01 +0000 (21:15 +0530)]
Avoid null pointer exception for invalid L2CAP channels
Change-Id: I8ac40e9cfe6dd015f40c6f493727e123a0d247e6
Pavlin Radoslavov [Sat, 23 May 2015 02:47:49 +0000 (19:47 -0700)]
Add missing clean_up step for the OSI module.
Now the OSI module's shut_down processing is split into "shut_down"
and "clean_up".
Previously, there was an ordering issue manipulating some of the
internal state during graceful shutdown/cleanup. Some of the modules
had two steps: shut_down, followed by clean_up, while other had only
shut_down step. This triggered the following assert in file alarm.c
alarm_cancel: assertion "alarms != NULL" failed
Bug:
21406940
Change-Id: Iab1f033a69cbff646a6b0f346760ae82f8b00b8f
Hemant Gupta [Thu, 15 Jan 2015 14:45:07 +0000 (20:15 +0530)]
Sniff: Use correct sniff configuration for PAN & HS
Change-Id: I95c302dd46cdcc63058c9cb3de17fdfd6ffe8d2e
Andre Eisenbach [Wed, 27 May 2015 00:40:12 +0000 (17:40 -0700)]
Make secure connections mode configurable
Change-Id: Id6101abc1fc339147c8b55023c7426ec1c807ee6
Prerepa Viswanadham [Wed, 27 May 2015 00:25:38 +0000 (17:25 -0700)]
Increase the min LE connection interval to 11.25ms
To reduce audio choppiness, increase the min LE connection interval
to 11.25ms from 7.5ms
Bug:
18776956
Change-Id: I8404ebe2f9562d555a2131ae30dd63b74bb362a4
Andre Eisenbach [Wed, 10 Jun 2015 20:58:21 +0000 (20:58 +0000)]
am
4e3e372a: Only register key types with uinput that we can actually map
* commit '
4e3e372af6bba32d27a154679e39cada3034df41':
Only register key types with uinput that we can actually map
Pavlin Radoslavov [Wed, 10 Jun 2015 20:58:20 +0000 (20:58 +0000)]
am
4be4396c: Elimininate unnecessary calls for releasing the wake lock.
* commit '
4be4396c8e4dc4c308219bdf402447a7feefe73e':
Elimininate unnecessary calls for releasing the wake lock.
David Stevens [Wed, 10 Jun 2015 20:58:19 +0000 (20:58 +0000)]
am
4905f8fc: Handle lack of service better
* commit '
4905f8fcddbf8e082a922b91dcc4674df95e2cfa':
Handle lack of service better
Andre Eisenbach [Wed, 10 Jun 2015 18:42:07 +0000 (18:42 +0000)]
am
af753a25: Do not ask for confirmation for temporary pairing
* commit '
af753a253bb3e40f11be33d2c70368adc205cca6':
Do not ask for confirmation for temporary pairing
Andre Eisenbach [Tue, 9 Jun 2015 03:43:00 +0000 (20:43 -0700)]
Do not ask for confirmation for temporary pairing
Bug:
20187234
Change-Id: I4213a3c2cafecdb39fcf3f19464c91776180267a
Dan Albert [Wed, 10 Jun 2015 00:33:01 +0000 (00:33 +0000)]
am
8f310904: Add missing include.
* commit '
8f31090414c4660a010216383e17cb932f34ec6f':
Add missing include.
Dan Albert [Tue, 9 Jun 2015 23:53:45 +0000 (16:53 -0700)]
Add missing include.
osi_malloc was never included, so it was implicitly defined as
returning an integer (thank you, C). Clang caught the int to pointer
conversion error.
Change-Id: I0d8a3363d92cb72a22780d049a53e193d2e50ec5
Casper Bonde [Tue, 9 Jun 2015 22:05:04 +0000 (22:05 +0000)]
am
818d0f2a: SAP: Make it possible to enforce a 16-digit pin code (1/5)
* commit '
818d0f2afb10c75125b0df9ea2bce6108268a269':
SAP: Make it possible to enforce a 16-digit pin code (1/5)
Casper Bonde [Thu, 21 May 2015 09:08:45 +0000 (11:08 +0200)]
SAP: Make it possible to enforce a 16-digit pin code (1/5)
This change enable the posibility to enforce using a
16-digit pin or MITM for a RFCOMM or L2CAP connection.
This is needed for the SIM access profile.
Change-Id: I02886ce284f27295205def3c66fb76372f5dab4f
Signed-off-by: Casper Bonde <c.bonde@samsung.com>
Satya Calloji [Thu, 21 May 2015 23:44:06 +0000 (16:44 -0700)]
Pairing is prompted with a wrong bd-address
Slave initiated encryption was not being notified on the correct
address and causes the key to be lost on slave device triggering
new pairing once in a while.
Change-Id: I5441a9e0bcf8ba45199483ccd02f207892ec296e
Andre Eisenbach [Fri, 22 May 2015 23:38:54 +0000 (16:38 -0700)]
Fix problem where multi-adv instances cannot be re-used
After using all multi-adv instances and stopping them, the instance ID
for each instance is incorrectly reset, causing the instance to be not
usable anymore.
Bug:
21404808
Change-Id: Ie3a3f07bc2204c7268567cb56248cd3eb7751742
Nitin Arora [Fri, 22 May 2015 00:58:36 +0000 (17:58 -0700)]
Recitfy condition when removing device from IRK resolving list
This patch corrects the conditional logic before sending HCI
command to remove the IRK list entry from the IRK resolving
list based on the max size of resolving list
Change-Id: I9adc933f0988ae907b3e218ba63814d106784787
Andre Eisenbach [Thu, 21 May 2015 06:55:13 +0000 (23:55 -0700)]
Fix build after cross-key issues broke non privacy enabled builds
Change-Id: Idef7239b07115be9290d7cca6610c603ffb3afa5
Satya Calloji [Tue, 19 May 2015 23:08:40 +0000 (16:08 -0700)]
Fix device/address types and IRK value handling
Handles the device and address types based on BD address
and provides the IRK values as available.
Change-Id: I351e0aea7f5e55caefa405b34261c75e78306552
Satya Calloji [Thu, 30 Apr 2015 20:58:59 +0000 (13:58 -0700)]
Fixed cross key for LE when paired over BR-EDR
SMP state machine was resending security request and waiting for a response
when paired over BR-EDR. The state machine state timed out due to this and
SMP failed while doing cross key pairing. Thus, user was asked for pairing
again.
Original author: Priti Aghera <paghera@broadcom.com>
Change-Id: I568f936bb7bee21fb78e8454469ecad3445f026f
Satya Calloji [Wed, 6 May 2015 16:24:06 +0000 (09:24 -0700)]
Fix SMP pairing request issue on LE
The cause of the failure:
- the master device sent the three keys to slave, but slave only receive
two and got the link drop before the third key is received.
- the slave device treats it as pairing failure due to the key missing.
SMP should wait for all keys been sent to controller before dropping the link.
Implement L2CAP fix channel tx_complete callback for this reason,
and it has been applied on the channel 6 (SMP).
Channel 7 (BR_SMP channel) was not keeping track of total_tx_unacked
number and closed the link too early. Added check in the
smp_br_key_distribution() and the ACL data tracking there before
posting SMP_BR_AUTH_CMPL_EVT.
Original author: Chaojing Sun <cjsun@broadcom.com>
Change-Id: If48a4c5e28b1d177f14ff089e8dfa3ace41eba83
Satya Calloji [Tue, 21 Apr 2015 23:34:54 +0000 (16:34 -0700)]
Unpair the other transport on a device paired
When unpair is initiated for LE or BR-EDR transport for a device,
close the link for other transport and unpair the device on
both transports, since both transports on a device are paired
due to cross key.
Original author: Priti Aghera <paghera@broadcom.com>
Change-Id: I13d4757eb056c4bd4c7cc0699ec61a28852702c5
Satya Calloji [Fri, 24 Apr 2015 06:39:49 +0000 (23:39 -0700)]
Static address is seen on scanner after unpairing
Fix for bonded devices that cannot be removed from resolving list when
scanning, advertising or when a connection is being initiated.
Suspend all active adv, scanning or connection initiation upon
completion of any resolving list operation.
Original author: Chaojing Sun <cjsun@broadcom.com>
Change-Id: Id104dace2944b1878eaf65b93aba3d01e477191d
Satya Calloji [Thu, 7 May 2015 21:06:37 +0000 (14:06 -0700)]
Fix for chip capability version check
Fixes the issue of extended scan command being sent out
for non-capable chipsets
Bug:
20916419
Change-Id: Ib5d848f49c34a3fc9c053a7488e12fb0c252587c