OSDN Git Service
The Android Automerger [Sun, 13 Mar 2016 08:01:40 +0000 (00:01 -0800)]
merge in nyc-release history after reset to nyc-dev
Daniel Cashman [Fri, 11 Mar 2016 23:07:11 +0000 (23:07 +0000)]
Merge "svcmgr: don't send reply to one-way txn." into nyc-dev
Lajos Molnar [Fri, 11 Mar 2016 19:05:53 +0000 (19:05 +0000)]
Merge "omx: add OMX_EventDataSpaceChanged" into nyc-dev
Lajos Molnar [Fri, 11 Mar 2016 19:05:47 +0000 (19:05 +0000)]
Merge "media: update DescribeColorAspectsParams" into nyc-dev
Andreas Gampe [Fri, 11 Mar 2016 18:53:41 +0000 (18:53 +0000)]
Merge "Installd: Do not log on missing B artifact" into nyc-dev
Andreas Gampe [Fri, 11 Mar 2016 18:45:54 +0000 (10:45 -0800)]
Installd: Do not log on missing B artifact
For now, just swallow the warning.
Bug:
25612095
Change-Id: Ib7131464c7eb85c153cb91bf5ff9dc2a6127dd4c
dcashman [Fri, 11 Mar 2016 18:38:10 +0000 (10:38 -0800)]
svcmgr: don't send reply to one-way txn.
svcmgr currently assumes that all incoming transactions are synchronous
and expecting a reply. Change the BR_TRANSACTION handling code to not
send a reply to one-way transactions.
Bug:
27111612
Change-Id: If2e56d3eb53b41d059dbe7d5d10e764343c0262c
Lorenzo Colitti [Fri, 11 Mar 2016 10:52:32 +0000 (10:52 +0000)]
Merge "Remove the route command from dumpstate." into nyc-dev
Lorenzo Colitti [Fri, 11 Mar 2016 01:58:55 +0000 (10:58 +0900)]
Remove the route command from dumpstate.
Its output is irrelevant and misleading, because:
1. It only looks at the "main" routing table, which is a last
resort routing table that is trumped by all other networks and
cannot even be used by non-root users.
2. The proper way to understand device routing is to look at the
output of "ip rule" and "ip route", both of which are already
in the bugreport.
Bug:
26154009
Change-Id: Ice19799639daa156a0d4dbb69915031e5582a8ed
Courtney Goeltzenleuchter [Thu, 10 Mar 2016 23:49:32 +0000 (23:49 +0000)]
Merge "loader: Include instance where required for GIPA" into nyc-dev
Michael Lentine [Thu, 10 Mar 2016 23:48:34 +0000 (23:48 +0000)]
Merge "Pass system layers through chain." into nyc-dev
Courtney Goeltzenleuchter [Thu, 10 Mar 2016 20:28:52 +0000 (13:28 -0700)]
loader: Include instance where required for GIPA
Bug:
27579008
GetInstanceProcAddr is only speced to allow VK_NULL_HANDLE
for the instance for a few calls.
Change-Id: If350e23edc336bff3b499631ba9a68b2921c6969
Nick Vaccaro [Thu, 10 Mar 2016 23:16:40 +0000 (23:16 +0000)]
Return 16 values when sending on-change sensor\'s last event am:
95f13901ed
am:
e4be205b7b
* commit '
e4be205b7b64be5d183b3a0f9724ec28a2d7e7cf':
Return 16 values when sending on-change sensor's last event
Nick Vaccaro [Thu, 10 Mar 2016 23:14:08 +0000 (23:14 +0000)]
Return 16 values when sending on-change sensor\'s last event
am:
95f13901ed
* commit '
95f13901edc77650f4bb8d727169e553af28a9d1':
Return 16 values when sending on-change sensor's last event
Dan Stoza [Thu, 10 Mar 2016 22:02:34 +0000 (22:02 +0000)]
Merge "Revert "DispSync: workaround HH hardware vsync issue"" into nyc-dev
Dan Stoza [Thu, 10 Mar 2016 21:05:46 +0000 (21:05 +0000)]
Merge "HWC2: Track move of transform into Geometry" into nyc-dev
Dan Stoza [Thu, 10 Mar 2016 20:41:56 +0000 (12:41 -0800)]
Revert "DispSync: workaround HH hardware vsync issue"
This reverts commit
c734d95c575830ffc97fc5d2ae14b020c95d05de, which was
a workaround for a bug on a device which is now obsolete.
Bug:
25845510
Change-Id: I3244bfd3f758c52dfe76e9d5b0a72bbcffdf5a6f
Dan Stoza [Thu, 10 Mar 2016 19:57:08 +0000 (11:57 -0800)]
HWC2: Track move of transform into Geometry
Changes a line where we missed the move of transform into Geometry to
fix the HWC2 build.
Bug:
26454664
Change-Id: Ib44ec8705b81da2aa1b99e61449609371e533297
Prathmesh Prabhu [Thu, 10 Mar 2016 19:51:59 +0000 (19:51 +0000)]
Merge "Do not queue trivial buffer for unsupported screenshot request." into nyc-dev
Prathmesh Prabhu [Thu, 10 Mar 2016 00:54:45 +0000 (16:54 -0800)]
Do not queue trivial buffer for unsupported screenshot request.
When screenshot is not supported, we queue an empty buffer to the
requesting producer. Besides returning a useless screenshot, this
overwrites the valuable error code, returning ERROR_OK whenever we
successfully return the trivial buffer.
Instead, refuse to queue the trivial buffer, and return the original
error code.
This replaces the workaround proposed in
I6da5d2fdecdef6c87d4dd7b353e2464678800110
BUG:
27505438
Change-Id: I597a9be25071d2a6ddafb7d39cc1b09fb48d5fd0
Pablo Ceballos [Thu, 10 Mar 2016 18:41:09 +0000 (18:41 +0000)]
Merge "ui: Fix Rect::reduce" into nyc-dev
The Android Automerger [Thu, 10 Mar 2016 08:01:20 +0000 (00:01 -0800)]
merge in nyc-release history after reset to nyc-dev
Pablo Ceballos [Thu, 10 Mar 2016 01:19:22 +0000 (17:19 -0800)]
ui: Fix Rect::reduce
- Properly handle the case where the Rect to be excluded is completely
outside the other Rect.
Bug
27415039
Change-Id: I3331d5b3ab231d023348079c781b194d24ac37dd
Felipe Leme [Wed, 9 Mar 2016 22:05:44 +0000 (22:05 +0000)]
Merge "Improved usage of stderr for logging." into nyc-dev
Lajos Molnar [Tue, 8 Mar 2016 23:18:06 +0000 (15:18 -0800)]
omx: add OMX_EventDataSpaceChanged
This is used internally by IOMX to signal a dataspace change by a surface
encoder.
Bug:
25684127
Change-Id: I42d4ec1db422fa62c251ce197495c6e8ab1430b3
Lajos Molnar [Wed, 9 Mar 2016 17:03:46 +0000 (09:03 -0800)]
media: update DescribeColorAspectsParams
Bug:
25684127
Change-Id: Id16c50dab510d5277edc0d84f11d0419a46642ae
Michael Lentine [Fri, 4 Mar 2016 17:03:35 +0000 (11:03 -0600)]
Pass system layers through chain.
Previously if any layers were activated via properties the layers did not see
those as arguments. After this the layers have a complete list of what layers
are enabled. This is then used in the layers to guarantee ordering.
Bug:
27126420
Change-Id: I3a6a923e2564abc3f7c43b110d892539e4d4bfdb
Lajos Molnar [Tue, 8 Mar 2016 19:30:15 +0000 (11:30 -0800)]
media: move non-OMX structs to VideoAPI.h from HardwareAPI.h
HardwareAPI.h is to be used by OMX only.
Also add asString support for MediaImage and ColorAspect enums.
Bug:
25684127
Change-Id: I839c2ee0815278cdabe74c7cc9c9dc32cb38df76
The Android Automerger [Wed, 9 Mar 2016 08:01:29 +0000 (00:01 -0800)]
merge in nyc-release history after reset to nyc-dev
Felipe Leme [Tue, 8 Mar 2016 23:11:15 +0000 (15:11 -0800)]
Improved usage of stderr for logging.
Dumpstate have some macros that write logs to both ALOG and stderr,
which is useful when the latter is redirected to a file.
But prior to this change, only the log statements from dumpstate.cpp
were using it, and utils.cpp was logging to stderr directly.
This change not only uses MYLOGE for all error messages, but also closes
stderr at the very end (so it doesn't miss statements like the
parameters sent to send_broadcast) and uses MYLOGD for the overall progress.
BUG:
27437378
Change-Id: I373a523e20c98d8f445822103784fa9900c6c684
Chong Zhang [Tue, 8 Mar 2016 20:36:45 +0000 (20:36 +0000)]
Merge "Fix warning when force-disconnect but there is no connected API" into nyc-dev
Chong Zhang [Tue, 8 Mar 2016 20:08:33 +0000 (12:08 -0800)]
Fix warning when force-disconnect but there is no connected API
It's not really an error, we can return early.
bug:
27295820
Change-Id: I450ca615cf9c33b9aaef9c31eec8217c97516df5
Lajos Molnar [Tue, 8 Mar 2016 18:52:17 +0000 (10:52 -0800)]
media: move asString into android namespace
Change-Id: I98c1f32de97b5dff0faf06c60127ef1c1b254604
David Brazdil [Tue, 8 Mar 2016 16:11:59 +0000 (16:11 +0000)]
Fix name of argument
Follow-up to change I92cc374b5b6d95ca7755e08b95a9bc9060df2178.
Change-Id: I62cc634ee456c6789b48ab8d8542dffa87f4cc72
David Brazdil [Tue, 8 Mar 2016 12:50:20 +0000 (12:50 +0000)]
Add 'rmprofiles' command to installd
Adds a new command to installd which clears all profile data of
a given package.
Bug:
27516490
Change-Id: I92cc374b5b6d95ca7755e08b95a9bc9060df2178
The Android Automerger [Tue, 8 Mar 2016 08:01:36 +0000 (00:01 -0800)]
merge in nyc-release history after reset to nyc-dev
Pablo Ceballos [Mon, 7 Mar 2016 18:48:18 +0000 (18:48 +0000)]
Merge "egl: Add EGL extension for front buffer auto-refresh mode" into nyc-dev
Pablo Ceballos [Mon, 7 Mar 2016 18:17:24 +0000 (18:17 +0000)]
Merge "Implement the stub for glCreateShaderProgramv" into nyc-dev
The Android Automerger [Mon, 7 Mar 2016 08:00:45 +0000 (00:00 -0800)]
merge in nyc-release history after reset to nyc-dev
Jesse Hall [Sun, 6 Mar 2016 06:27:02 +0000 (22:27 -0800)]
libvulkan: Fix double-free, refactor instance destruction
Fixes dEQP-VK.api.object_management.alloc_callback_fail.instance.
Since we were calling DestroyInstance_Bottom from both
CreateInstance_Bottom and CreateInstance_Top failure paths, we were
calling the driver's DestroyInstance twice.
To avoid such bugs, this change clears the driver instance handle to
VK_NULL_HANDLE after calling the driver DestroyInstance.
But the real fix in this change is to make creation and destruction
symmetric. Now DestroyInstance_Bottom only cleans up the things that
were initialized/allocated in CreateInstance_Bottom, and is only
called from CreateInstance_Bottom failure paths and from a dispatched
vkDestroyInstance. Similarly, DestroyInstance_Top and failure paths in
CreateInstance_Top call DestroyInstance (formerly TeardownInstance) to
clean up things initialized/allocated in CreateInstance_Top. The
direct calls from *_Top functions to DestroyInstance_Bottom are gone
-- *_Top functions should only reach *_Bottom functions via dispatch,
so the call goes through enabled layers.
Bug:
27493757
Change-Id: I4e9f8508297813415499dc17803fff49ce9abdcf
(cherry picked from commit
15cd1e269fd2dacef8b95006928b122b9dabbeea)
The Android Automerger [Sun, 6 Mar 2016 08:01:41 +0000 (00:01 -0800)]
merge in nyc-release history after reset to nyc-dev
Josh Gao [Fri, 4 Mar 2016 21:12:29 +0000 (13:12 -0800)]
dumpsys: switch to using a pipe to work around selinux denial.
Some services can't write to the socket that we were passing in, due to
selinux policies. Use a pipe for now.
Bug: http://b/
27500248
Change-Id: Ic681121597a1717d31ef356bd6fe2c2daaa86d94
Pablo Ceballos [Fri, 29 Jan 2016 04:06:06 +0000 (20:06 -0800)]
Implement the stub for glCreateShaderProgramv
Bug
26851015
Change-Id: Ide7c46e0b5525d082dc591e92b4a8d8b21665708
Pablo Ceballos [Thu, 3 Mar 2016 23:20:02 +0000 (15:20 -0800)]
Revert "SF: detachLayer from Client earlier on destruction"
This reverts commit
e338df1c2ff4ed2cd575a0e3193ef77c9cd9cb72.
Bug
27330889
Change-Id: I7e62ac2623bd0e1304f36a895ee2b5f9160e2a7e
Pablo Ceballos [Fri, 4 Mar 2016 17:54:21 +0000 (17:54 +0000)]
Merge "Revert "SF: detachLayer from Client earlier on destruction"" into nyc-dev
Felipe Leme [Fri, 4 Mar 2016 17:14:16 +0000 (17:14 +0000)]
Merge "Removed temporary 'v1-dev1-dumpsys-split' version and bumped version to 'v1-dev2'." into nyc-dev
Pablo Ceballos [Thu, 3 Mar 2016 23:20:02 +0000 (15:20 -0800)]
Revert "SF: detachLayer from Client earlier on destruction"
This reverts commit
e338df1c2ff4ed2cd575a0e3193ef77c9cd9cb72.
Bug
27330889
Change-Id: I7e62ac2623bd0e1304f36a895ee2b5f9160e2a7e
Rob Carr [Thu, 3 Mar 2016 21:35:46 +0000 (21:35 +0000)]
Merge "Latch transform with geometry state." into nyc-dev
Lajos Molnar [Thu, 3 Mar 2016 21:22:38 +0000 (21:22 +0000)]
Merge "media: rework DescribeColorAspectsParams" into nyc-dev
Robert Carr [Wed, 2 Mar 2016 02:36:58 +0000 (18:36 -0800)]
Latch transform with geometry state.
WindowManager would like this feature for animating
windows between sizes. For example, if we are animating
from a smaller to larger window, we need to complete the resize
at the beginning of the animation to avoid up-scaling. However
to avoid artifacts we need the window to appear at its old size
following this resize, so we use the transform to scale down. However
as the transform is latched immediately, we result in a frame where
the window is too small, until the resize is complete. This is
a change in behavior but it's hard to understand how it could
cause errors. Previously if someone wished to set the transform
and resize a window in the same transaction, then the results
would be undefined (depending on the state of the window buffer),
and there would be no avenue for synchronization.
Bug:
26454664
Change-Id: I4e8475967e0a19aa5879af965a5716eb173f9700
Andreas Gampe [Thu, 3 Mar 2016 18:56:14 +0000 (18:56 +0000)]
Merge "Installd: Add move_ab command" into nyc-dev
Andreas Gampe [Tue, 1 Mar 2016 19:46:45 +0000 (11:46 -0800)]
Installd: Add move_ab command
Add a command to move A/B artifacts into the right position. This
is used for apps that live in data.
Bug:
25612095
Change-Id: I40c3ca54bd0f3b2d646a14b145e733096dabbbb2
The Android Automerger [Thu, 3 Mar 2016 08:01:21 +0000 (00:01 -0800)]
merge in nyc-release history after reset to nyc-dev
Josh Gao [Tue, 1 Mar 2016 00:20:34 +0000 (16:20 -0800)]
dumpsys: use a socket for dumping, add timeout support.
Passing the stdout file descriptor directly to a service to dump with
leads to bad things happening if the service hangs, or dumpsys is
terminated prematurely. For example, `dumpsys foo | cat` will not
terminate, even if the dumpsys process is killed, since the write end of
the pipe is still alive in the hung service.
Pass an intermediate socketpair when dumping services to avoid this.
Bug: http://b/
26849443
Change-Id: Ide18741080355b3c680275a59172c61734eca92d
Eino-Ville Talvala [Wed, 2 Mar 2016 21:47:08 +0000 (21:47 +0000)]
Merge "GUI: Move Surface.aidl here and implement for native" into nyc-dev
Pablo Ceballos [Wed, 2 Mar 2016 01:38:10 +0000 (01:38 +0000)]
Revert "Revert "Partial revert of "Fix Surface slot caching"""
This reverts commit
16c9c304a33af36faa352d32777bc48c50bf7b74.
Change-Id: Icbdcba8a646ac40c0533c1c04f5b15769332976c
Chong Zhang [Wed, 2 Mar 2016 20:09:58 +0000 (20:09 +0000)]
Merge "Add SurfaceControl::disconnect() to disconnect currently connected API" into nyc-dev
Calin Juravle [Wed, 2 Mar 2016 16:17:24 +0000 (16:17 +0000)]
Merge "Clean up error logs for profiles which don't exists." into nyc-dev
Pablo Ceballos [Wed, 2 Mar 2016 14:16:35 +0000 (14:16 +0000)]
Merge "Revert "Revert "Partial revert of "Fix Surface slot caching"""" into nyc-dev
The Android Automerger [Wed, 2 Mar 2016 08:01:35 +0000 (00:01 -0800)]
merge in nyc-release history after reset to nyc-dev
Pablo Ceballos [Wed, 2 Mar 2016 01:38:10 +0000 (01:38 +0000)]
Revert "Revert "Partial revert of "Fix Surface slot caching"""
This reverts commit
16c9c304a33af36faa352d32777bc48c50bf7b74.
Change-Id: Icbdcba8a646ac40c0533c1c04f5b15769332976c
Nick Vaccaro [Tue, 1 Mar 2016 23:49:08 +0000 (15:49 -0800)]
Return 16 values when sending on-change sensor's last event
Sensor Services now sends 16 values when sending out the last
event for a vendor defined on-change sensor type.
Bug:
26962513
Change-Id: I238b945c9dc9186b621544aef7d0244f63d4b2e8
Eino-Ville Talvala [Wed, 6 Jan 2016 20:09:11 +0000 (12:09 -0800)]
GUI: Move Surface.aidl here and implement for native
- Move android/view/Surface.aidl parcelable definition from frameworks/base
- Implement matching native behavior to android.view.Surface parceling,
to enable use of android.view.Surface in generated native AIDL interfaces
Bug:
25091611
Change-Id: I87ffbb9a19c27a99ce0749d0ca1f17aaa6b3fe74
Calin Juravle [Tue, 1 Mar 2016 17:59:18 +0000 (17:59 +0000)]
Merge "Return an error if try to profile guide compile to a public oat file" into nyc-dev
Ronghua Wu [Tue, 1 Mar 2016 17:36:24 +0000 (17:36 +0000)]
Merge "media: define OMX_VIDEO_HEVCProfileMain10HDR10" into nyc-dev
Calin Juravle [Tue, 23 Feb 2016 19:06:45 +0000 (19:06 +0000)]
Return an error if try to profile guide compile to a public oat file
This makes sure that the oat file access is private to the app when
using profiles.
Bug:
27334750
Bug:
26080105
Change-Id: I9f5deec1a1068d0276928117134956eb233ce504
The Android Automerger [Tue, 1 Mar 2016 08:01:35 +0000 (00:01 -0800)]
merge in nyc-release history after reset to nyc-dev
Andreas Gampe [Tue, 1 Mar 2016 05:42:47 +0000 (05:42 +0000)]
Merge "Otapreopt: Fix patchoat delta parameter" into nyc-dev
Dan Stoza [Tue, 1 Mar 2016 04:49:09 +0000 (04:49 +0000)]
Merge changes I4589e02a,Id300e8b2 into nyc-dev
* changes:
Switch SurfaceFlinger to HWC 2.0
HWC2On1Adapter: Initialize variables and fix mutex
Lajos Molnar [Tue, 1 Mar 2016 04:13:36 +0000 (20:13 -0800)]
media: rework DescribeColorAspectsParams
Separate out ColorAspects into its own structure so it does not
include OMX-specific fields.
Bug:
25975353
Change-Id: I55281d129fce7db81c09bf0d0bc2b13762d7000d
Felipe Leme [Tue, 1 Mar 2016 02:15:42 +0000 (18:15 -0800)]
Removed temporary 'v1-dev1-dumpsys-split' version and bumped version to
'v1-dev2'.
BUG:
26639621
Change-Id: I5f26272d221330b01d2b873e00105a8f8b739b63
Andreas Gampe [Tue, 1 Mar 2016 02:04:17 +0000 (18:04 -0800)]
Otapreopt: Fix patchoat delta parameter
Only give the delta, not the new base address.
Bug:
25612095
Change-Id: Ieeed5000da5e72477764fc92fe8fa016287d4cd8
Aurimas Liutikas [Tue, 1 Mar 2016 01:40:37 +0000 (01:40 +0000)]
Merge "Fix warnings in frameworks/native/opengl/tests" into nyc-dev
Chong Zhang [Tue, 1 Mar 2016 00:47:47 +0000 (16:47 -0800)]
Add SurfaceControl::disconnect() to disconnect currently connected API
bug:
27295820
Change-Id: I6f51338bc15e018ed7899172653599ab6254c8c9
Lajos Molnar [Tue, 1 Mar 2016 00:40:28 +0000 (00:40 +0000)]
Merge "HardwareAPI: set enum basetypes for MediaImage2" into nyc-dev
Pablo Ceballos [Mon, 29 Feb 2016 22:59:23 +0000 (22:59 +0000)]
Merge "Revert "Partial revert of "Fix Surface slot caching""" into nyc-dev
Pablo Ceballos [Mon, 29 Feb 2016 22:58:54 +0000 (22:58 +0000)]
Merge "Fix glGetTransformFeedbackVarying JNI" into nyc-dev
Calin Juravle [Mon, 29 Feb 2016 16:41:52 +0000 (16:41 +0000)]
Clean up error logs for profiles which don't exists.
Bug:
27401160
Change-Id: I60f23477e90052c00fb1c1cc5abe827f4270cd07
Dan Stoza [Mon, 2 Nov 2015 21:00:03 +0000 (13:00 -0800)]
Switch SurfaceFlinger to HWC 2.0
Enables SurfaceFlinger to speak to version 2.0 of the Hardware Composer
HAL instead of version 1.x (also removing support for the framebuffer
HAL). By default, however, this functionality is disabled. In order to
enable it, USE_HWC2 must be set to true in Android.mk.
Change-Id: I4589e02ac2165236b10ff2f7cb772f87e0d3daab
Dan Stoza [Tue, 23 Feb 2016 19:43:19 +0000 (11:43 -0800)]
HWC2On1Adapter: Initialize variables and fix mutex
Initializes a few variables that had been missed before, and switches
the Adapter state mutex to be recursive, since it is held during the
call into HWC1 prepare, which can call back into the Adapter to perform
an invalidate.
Change-Id: Id300e8b23403f5339562fd860c2ce9d0f2b72f27
Jesse Hall [Mon, 29 Feb 2016 04:58:50 +0000 (20:58 -0800)]
libvulkan: Check for negative in signed -> unsigned conversion
Requested during security audit in bug
27118888.
Change-Id: Id82382258d2b6f8523b8af29f494dfc67100d190
Jesse Hall [Mon, 29 Feb 2016 04:48:56 +0000 (20:48 -0800)]
libvulkan: Enable integer sanitization
This causes the compiler to add runtime checks for undefined (e.g.
shift by larger than bitwidth) or suspicious (e.g. unsigned integer
overflow) operations. The process will abort if they occur.
In particular, we do many allocations of the form pfnAllocation(n *
sizeof(T)); if 'n' is large these will overflow and we'll allocate
less memory than expected, possibly leading to exploitable buffer
overruns.
Requested during security audit in bug
27118888.
Change-Id: Id81c94595579df034b948a40270f164e38635070
The Android Automerger [Sun, 28 Feb 2016 08:02:01 +0000 (00:02 -0800)]
merge in nyc-release history after reset to nyc-dev
Felipe Leme [Fri, 26 Feb 2016 23:40:30 +0000 (23:40 +0000)]
Merge "Rename .zip file if necessary." into nyc-dev
Felipe Leme [Fri, 26 Feb 2016 23:03:52 +0000 (15:03 -0800)]
Rename .zip file if necessary.
Users have the option to rename the suffix of the files generated by
dumpstate by letting Shell set the dumpstate.PID.name property.
This works fine for text files and used to work for zip files as well,
but now the zip file is opened earlier in the process, so it has to be
renamed at the end.
BUG:
27384407
Change-Id: I288d8eb4a3ffe0161b86cdce14f63e9bfdf865ab
Svet Ganov [Fri, 26 Feb 2016 20:13:04 +0000 (12:13 -0800)]
Refresh the native app ops manager's token if needed.
The app ops manager serivce keeps track of started app ops
by a process by stashing them in a binder object that is
passed to the remote process to hold on to. Hence, the data
is in the system process and is referenced by the client
process it tracks to prevent garbage collaction and limit
risk of resource leaks. It is possible that the client
process is longer lived than the system seriver, e.g. camera
server starts an app op, the system server dies for some
reason, the camera server's app ops manager ends up with
a stale token. The solution is to check the validity of the
token and refresh it if needed.
bug:
27344593
Change-Id: I0abb39e777b7b66b1b5cefede7e7b41c4404c4b1
Ronghua Wu [Thu, 25 Feb 2016 00:28:13 +0000 (16:28 -0800)]
media: define OMX_VIDEO_HEVCProfileMain10HDR10
Bug:
25684127
Change-Id: I7e51470b79914eed772f561484e441925f8df1d3
Svetoslav Ganov [Fri, 26 Feb 2016 20:29:58 +0000 (20:29 +0000)]
Merge "Refresh the native app ops manager's token if needed." into nyc-dev
Svet Ganov [Fri, 26 Feb 2016 20:13:04 +0000 (12:13 -0800)]
Refresh the native app ops manager's token if needed.
The app ops manager serivce keeps track of started app ops
by a process by stashing them in a binder object that is
passed to the remote process to hold on to. Hence, the data
is in the system process and is referenced by the client
process it tracks to prevent garbage collaction and limit
risk of resource leaks. It is possible that the client
process is longer lived than the system seriver, e.g. camera
server starts an app op, the system server dies for some
reason, the camera server's app ops manager ends up with
a stale token. The solution is to check the validity of the
token and refresh it if needed.
bug:
27344593
Change-Id: I0abb39e777b7b66b1b5cefede7e7b41c4404c4b1
Jesse Hall [Fri, 26 Feb 2016 00:19:08 +0000 (00:19 +0000)]
Merge "Add Vulkan feature definitions" into nyc-dev
Jesse Hall [Thu, 25 Feb 2016 11:23:13 +0000 (03:23 -0800)]
Add Vulkan feature definitions
Bug:
26583896
Change-Id: I4d1e8b017f478fd79a5075057aeaccbeb1086a2a
Felipe Leme [Thu, 25 Feb 2016 22:02:44 +0000 (14:02 -0800)]
Moved final vibration to the end of the process.
BUG:
26347468
Change-Id: I872d9175fd09b47da512cb2da11a533a921d9a5c
Pablo Ceballos [Thu, 25 Feb 2016 18:54:17 +0000 (18:54 +0000)]
Merge "Add glReadPixels with buffer-offset argument" into nyc-dev
Pablo Ceballos [Thu, 25 Feb 2016 18:52:06 +0000 (18:52 +0000)]
Merge "SF: check secure layers in screenshot message handler" into nyc-dev
Pablo Ceballos [Tue, 23 Feb 2016 19:18:51 +0000 (11:18 -0800)]
SF: check secure layers in screenshot message handler
- Instead of checking for the presence of secure layers on the Binder
thread, check in the message handler. Transactions may have occurred
in between when the check is done and when the screen shot message
is handled.
Bug
23757877
Change-Id: Iec74193996ca72c60f86f7c0f0b2a5dea8d19543
Jesse Hall [Thu, 25 Feb 2016 12:19:32 +0000 (04:19 -0800)]
vulkan: Update to vulkan.h 1.0.3
Change-Id: Ic607533768989aa65e41b9b0e459d7af170ab180
Jesse Hall [Thu, 25 Feb 2016 00:44:42 +0000 (16:44 -0800)]
vkinfo: Provide VkApplicationInfo
This is supposed to be optional, but the N6P/N5X driver currently
requires it.
Change-Id: Ib90962a595052cd829b4967dce4b5a6740173a96
Jesse Hall [Thu, 25 Feb 2016 08:59:06 +0000 (08:59 +0000)]
Merge changes I385a363d,I99129b49 into nyc-dev
* changes:
libvulkan: Set window transform based on swapchain preTransform
libvulkan: Report current and supported transforms accurately
The Android Automerger [Thu, 25 Feb 2016 08:01:24 +0000 (00:01 -0800)]
merge in nyc-release history after reset to nyc-dev
Lajos Molnar [Thu, 25 Feb 2016 02:01:10 +0000 (18:01 -0800)]
HardwareAPI: set enum basetypes for MediaImage2
- also add some internal methods for cleaner usage of these
types
Bug:
25684127
Change-Id: I151270b015ba5989212926e946e04edb7ee8494d