OSDN Git Service
Mark Brown [Thu, 28 Apr 2011 09:57:54 +0000 (10:57 +0100)]
ASoC: Work around allmodconfig failure
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Mark Brown [Tue, 26 Apr 2011 15:04:37 +0000 (16:04 +0100)]
ASoC: Implement WM8962 ADC high pass filter configuration
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Lars-Peter Clausen [Wed, 27 Apr 2011 16:34:31 +0000 (18:34 +0200)]
ASoC: Add dapm_find_widget helper
This patch adds a helper function for searching DAPM widgets by name.
This allows to streamline functions which operate on widgets by name.
It also allows to get rid of copy'n'pasted code which was added to fallback to
widgets from other contexts if the widget was not found in the current context.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Wed, 27 Apr 2011 17:17:01 +0000 (18:17 +0100)]
ASoC: Don't specify the DMA driver for Speyside baseband link
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Mark Brown [Wed, 27 Apr 2011 17:16:32 +0000 (18:16 +0100)]
ASoC: Add more natural support for no-DMA DAIs
Since we can now support multiple platforms allow machines to not specify
a platform in a DAI link. Since the rest of the code requires that we have
a struct device for all objects we do this by substituting in a dummy
device that we register automatically.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Mark Brown [Wed, 27 Apr 2011 17:58:17 +0000 (18:58 +0100)]
ASoC: Allow platform drivers to have no ops structure
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Mark Brown [Mon, 25 Apr 2011 17:27:35 +0000 (18:27 +0100)]
ASoC: Don't warn if the WM8962 SYSCLK FLL setting doesn't match reality
When bringing up audio low power modes boards may configure SYSCLK before
they actually start the FLL as we do much of the clocking setup prior to
the power up sequence.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Mark Brown [Mon, 25 Apr 2011 19:14:21 +0000 (20:14 +0100)]
ASoC: Implement WM8962 DMIC support
DMIC support is automatically disabled when none of the GPIOs are set up
to bring out the DMICCLK and DMICDAT pins at startup.
Note that there's no support for controlling DMIC routing except the power
control so the board DAPM configuration will need to manage DMIC enable and
disable if analogue mics (eg, a headset) also exist.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Mark Brown [Mon, 25 Apr 2011 19:01:42 +0000 (20:01 +0100)]
ASoC: Define constants for WM8962 GPIO functions
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Mark Brown [Mon, 25 Apr 2011 17:44:01 +0000 (18:44 +0100)]
ASoC: Move WM8962 FLL configuration to CODEC
There's only one DAI anyway.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Mark Brown [Mon, 25 Apr 2011 16:53:43 +0000 (17:53 +0100)]
ASoC: Support FLL lock interrupt on WM8962
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Mark Brown [Thu, 21 Apr 2011 13:16:14 +0000 (14:16 +0100)]
ASoC: Support 24.576MHz MCLKs in WM8915
We can safely divide these down to within the supported SYSCLK range.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Mark Brown [Tue, 26 Apr 2011 10:46:47 +0000 (11:46 +0100)]
Merge branch 'for-2.6.39' into for-2.6.40
Ben Gardiner [Thu, 21 Apr 2011 18:19:04 +0000 (14:19 -0400)]
davinci-mcasp: fix _CBM_CFS pin directions
The current davinci_mcasp_set_dai_fmt() sets bits ACLKX and ACLKR in the PDIR
register for the codec clock-master/frame-slave mode; however, this results in
the ACLKX and ACLKR pins being outputs according to SPRUFM1 [1] which
conflicts with "codec is clock master."
Similarly to the previous patch in this series, "fix _CBM_CFS hw_params" --
For codec clock-master/frame-slave mode (_CMB_CFS), clear bits ACLKX and ACLKR
in the PDIR register to set the pins as inputs and hence allow externally
sourced bit-clocks.
[1] http://www.ti.com/litv/pdf/sprufm1
Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Reviewed-by: James Nuss <jamesnuss@nanometrics.ca>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Ben Gardiner [Thu, 21 Apr 2011 18:19:03 +0000 (14:19 -0400)]
davinci-mcasp: fix _CBM_CFS hw_params
The current davinci_mcasp_set_dai_fmt() sets bits ACLKXE and ACLKRE (CLKXM
and CLKRM as they are reffered to in SPRUFM1 [1]) for codec clock-slave/
frame-slave mode (_CBS_CFS) which selects internally generated bit-clock and
frame-sync signals; however, it does the same thing again for codec
clock-master/frame-slave mode (_CBM_CFS) in the very next case statement which
is incorrectly selecting internally generated bit-clocks in this mode.
For codec clock-master/frame-slave mode (_CBM_CFS), clear bits ACLKXE and
ACLKRE to select externally-generated bit-clocks.
[1] http://www.ti.com/litv/pdf/sprufm1
Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Reviewed-by: James Nuss <jamesnuss@nanometrics.ca>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Ben Gardiner [Thu, 21 Apr 2011 18:19:02 +0000 (14:19 -0400)]
davinci-mcasp: use bitfield definitions for PDIR
The current driver creates value for set/clr of PDIR using (x<<26) instead
of the #defines that are convieniently made available.
Update the driver to use the bitfield definitions of PDIR. There is no
functional change introduced by this patch.
Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Reviewed-by: James Nuss <jamesnuss@nanometrics.ca>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Ben Gardiner [Thu, 21 Apr 2011 18:19:01 +0000 (14:19 -0400)]
ASoC: davinci-mcasp: correct tdm_slots limit
The current check for the number of tdm-slots specified by platform data is
always true (x >= 2 || x <= 32); therefore the else branch that warns of an
incorrect number of slots can never be taken.
Check that the number of tdm slots specified by platform data is between 2
and 32, inclusive.
Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Reviewed-by: James Nuss <jamesnuss@nanometrics.ca>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Kuninori Morimoto [Thu, 21 Apr 2011 01:33:52 +0000 (10:33 +0900)]
ASoC: sh: fsi: Add module/port clock control function
The FIFO of each port were always working though it was not used
in current FSI driver.
This patch add module/port clock control function for fixing it.
This patch is also caring suspend/resume.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Simon Horman <simon@horms.net>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Kuninori Morimoto [Thu, 21 Apr 2011 01:33:47 +0000 (10:33 +0900)]
ASoC: sh: fsi: add dev_pm_ops :: suspend/resume
Current FSI driver sets important settings when probing.
And it are not set again as long as driver is not bind again.
This mean FSI driver will lost it from register
if suspend/resume are happen.
This patch save important settings for suspend/resume.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Simon Horman <simon@horms.net>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Kuninori Morimoto [Thu, 21 Apr 2011 01:33:36 +0000 (10:33 +0900)]
ASoC: sh: fsi: add fsi_is_clk_master function
If FSI port is clock master, it use set_rate function
which is callback from platform,
and it is not necessary to call it if FSI port is clock slave.
Current FSI driver called this callback if platform provide it.
This patch modify it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Simon Horman <simon@horms.net>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Thu, 21 Apr 2011 11:01:49 +0000 (12:01 +0100)]
ASoC: Remove default settings from Tegra Kconfig
There needs to be a strong reason for overriding the Kconfig default.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Mark Brown [Thu, 21 Apr 2011 11:00:27 +0000 (12:00 +0100)]
Merge branch 'tegra' into for-2.6.40
Fix up merge with Harmony driver rename.
Conflicts:
sound/soc/tegra/Kconfig
Stephen Warren [Tue, 19 Apr 2011 16:18:01 +0000 (10:18 -0600)]
ARM: Tegra: select MACH_HAS_SND_SOC_TEGRA_WM8903
CONFIG_SND_SOC_TEGRA_WM8903 is useful for many Tegra boards. To avoid the
ASoC tegra/Kconfig enumerating them all, instead have the Tegra machine
Kconfig select MACH_HAS_SND_SOC_TEGRA_WM8903 where appropriate, and have
SND_SOC_TEGRA_WM8903 depend on this.
[Redid ASoC diff so it applies. -- broonie]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Stephen Warren [Tue, 19 Apr 2011 02:58:11 +0000 (20:58 -0600)]
ASoC: WM8903: Implement DMIC support
In addition to the currently supported analog capture path, the WM8903
also supports digital mics.
The analog and digital capture paths are exclusive; a mux is present to
select the capture source.
Logically, the mux exists to select the decimator's input, from either
the ADC or DMIC block outputs. However, the ADC power domain also
includes the DMIC interface. Consequently, this change represents the
mux as existing immediately before the ADC, and selecting between the
Input PGA and DMIC block outputs.
An alternative might be to represent the mux in its correct location,
and associate the ADC power enable controls with both the real ADC, and
a fake ADC for the DMIC?
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Hsiang [Wed, 20 Apr 2011 01:20:40 +0000 (18:20 -0700)]
ASoC: Add EQ and filter to max98095 CODEC driver
This patch adds the equalizer and biquad filter controls.
Signed-off-by: Peter Hsiang <peter.hsiang@maxim-ic.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Stephen Warren [Tue, 19 Apr 2011 21:25:12 +0000 (15:25 -0600)]
ASoC: Tegra: wm8903: s/code/data/ for control/widget/maps
Replace calls to a variety of registration functions by updating
struct snd_soc_card snd_soc_tegra_wm8903 to directly point at the
various control/widget/map tables instead. The ASoC core now
performs any required registration based on these data fields.
(Applying Mark's TrimSlice review comments to the existing driver)
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Lu Guanqun [Wed, 20 Apr 2011 08:00:51 +0000 (16:00 +0800)]
ASoC: fix two ident style problems
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Lu Guanqun [Wed, 20 Apr 2011 08:00:46 +0000 (16:00 +0800)]
ASoC: simple style fix
replace the tab with spaces,
make it align with other paragraphs
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Lu Guanqun [Wed, 20 Apr 2011 08:00:42 +0000 (16:00 +0800)]
ASoC: remove unused comment
`type` parameter is not longer used in `snd_soc_codec_set_cache_io`,
so remove this line.
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Lu Guanqun [Wed, 20 Apr 2011 08:00:36 +0000 (16:00 +0800)]
ASoC: fix a simple coding style issue
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Stephen Warren [Tue, 19 Apr 2011 21:25:11 +0000 (15:25 -0600)]
ASoC: snd_soc_dapm_get_pin_status: Match other contexts too
Not all widgets on a card are within the codec's DAPM context. Fix
snd_soc_dapm_get_pin_status to search all contexts when looking for a
widget.
This change is required when modifying tegra_wm8903 to use
snd_soc_card.widgets rather than calling snd_soc_dapm_new_controls; the
former adds the widgets to the card's DAPM context, whereas tegra_wm8903
uses the codec's DAPM context when calling snd_soc_dapm_new_controls.
By code inspection, I suspect this also applies to Samsung Speyside.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Stephen Warren [Tue, 19 Apr 2011 21:25:10 +0000 (15:25 -0600)]
ASoC: Tegra: Retrieve card from DAPM context not codec
Card widgets are created in the card's DAPM context, not any codec's DAPM
context. Hence, w->codec==NULL. Instead, find the card from the widget
through the DAPM context of the widget, not the codec of the widget.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Stephen Warren [Tue, 19 Apr 2011 21:25:09 +0000 (15:25 -0600)]
ASoC: Tegra: Don't return mclk_changed from utils_set_rate
Only the clock programming code needs to know whether the clocks changed,
and that is encapsulated within tegra_asoc_utils_set_rate(). The machine
driver's call to snd_soc_dai_set_sysclk(codec_dai, ...) is safe
irrespective of whether the clocks changed.
(Applying Mark's TrimSlice review comments to the existing driver)
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Stephen Warren [Tue, 19 Apr 2011 21:25:08 +0000 (15:25 -0600)]
ASoC: Tegra: wm8903: Remove redundant drvdata clears
When the driver is not initialized/registered, nothing should be touching
these fields anyway, so there's no point clearing them out.
(Applying Mark's TrimSlice review comments to the existing driver)
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Stephen Warren [Tue, 19 Apr 2011 21:25:07 +0000 (15:25 -0600)]
ASoC: Tegra: wm8903 probe: Don't call machine_is_*()
This machine driver is a platform driver, and hence will only be
instantiated on the correct machines. Hence, there is no need to
check the current machine during probe.
(Applying Mark's TrimSlice review comments to the existing driver)
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Stephen Warren [Tue, 12 Apr 2011 17:40:39 +0000 (11:40 -0600)]
ASoC: Tegra: Support more boards
* Ventana is identical to Harmony.
* Seaboard, Kaen, and Aebl are all pretty similar, mainly with slightly
different sets of GPIOs, and slightly different WM8903 pin connectivity.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Stephen Warren [Tue, 12 Apr 2011 17:40:38 +0000 (11:40 -0600)]
ASoC: Tegra: Don't store snd_soc_jack_gpio in an array
Storing the struct in an array makes the assignments to the GPIO member a
little non-obvious, and is pointless when there's only a single GPIO.
(I thought I fixed this during the review cycle when first submitting this
driver, but I guess I overlooked that)
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Stephen Warren [Tue, 12 Apr 2011 17:40:37 +0000 (11:40 -0600)]
ASoC: Tegra: Rename Kconfig SND_TEGRA_SOC_* to SND_SOC_TEGRA_*
The previous commit renames SND_TEGRA_SOC_HARMONY to SND_TEGRA_SOC_WM8903.
While we're breaking people's .config files, rename all Tegra/SOC-related
Kconfig variables to be more consistent with at least the core codec
variables. Note that there exist machines that name their variables both
ways.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Stephen Warren [Tue, 12 Apr 2011 17:40:36 +0000 (11:40 -0600)]
ASoC: Tegra: Rename harmony.c to tegra_wm8903.c
Soon, this machine driver will be updated to handle a number of Tegra boards
using the WM8903 codec. Rename the file in advance to reflect this.
Fix the content of tegra_wm8903.c to match the rename; replace references
to Harmony board with something more generic.
* s/struct tegra_harmony/struct tegra_wm8903/
* s/harmony/machine/ # variable name
* Similar rename for some functions
* Similar comment fix
* Similar MODULE_DESCRIPTION fix
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Mon, 18 Apr 2011 17:08:22 +0000 (18:08 +0100)]
Merge branch 'tegra' into for-2.6.40
Mark Brown [Mon, 18 Apr 2011 17:07:43 +0000 (18:07 +0100)]
ASoC: Merge branch 'for-2.6.39' into for-2.6.40
Fix trivial conflict caused by silly spelling fix patch.
Conflicts:
sound/soc/codecs/wm8994.c
Stephen Warren [Tue, 12 Apr 2011 17:29:01 +0000 (11:29 -0600)]
ARM: Tegra: Add to tegra_wm8903_platform_data
Seaboard derivate Kaen has a GPIO to mute the headphone output. Add a field
to tegra_wm8903_platform_data so the board files can pass the GPIO number
for that to the ASoC machine driver.
Also, initialize this new field to a "not present" value for Harmony.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Stephen Warren [Tue, 12 Apr 2011 17:29:00 +0000 (11:29 -0600)]
ASoC: Tegra: Rename pdev tegra-snd-harmony to tegra-snd-wm8903
Soon, this machine driver will be updated to handle a number of Tegra boards
using the WM8903 codec. Rename the platform device in advance to reflect this.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Stephen Warren [Tue, 12 Apr 2011 17:28:59 +0000 (11:28 -0600)]
ARM: Tegra: Rename harmony_audio.h -> tegra_wm8903_pdata.h
The audio driver will soon support more than just the Tegra Harmony board.
Rename the platform data header file and data type to reflect this.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Guennadi Liakhovetski [Fri, 15 Apr 2011 18:17:34 +0000 (20:17 +0200)]
ASoC: add a module alias to the FSI driver
This patch enables FSI driver autoloading on sh-mobile systems.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Reviewed-by: Simon Horman <horms@verge.net.au
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Mon, 18 Apr 2011 16:12:14 +0000 (17:12 +0100)]
Merge commit 'v2.6.39-rc3' into for-2.6.39
Mark Brown [Wed, 13 Apr 2011 17:37:18 +0000 (10:37 -0700)]
Merge branch 'for-2.6.39' into for-2.6.40
Lars-Peter Clausen [Tue, 12 Apr 2011 20:51:04 +0000 (22:51 +0200)]
ARM: s3c2440: gta02; Register dfbmcs320 device for BT audio interface
Register the dfbmcs320 device which provides the PCM DAI for the bluetooth
module.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Lars-Peter Clausen [Tue, 12 Apr 2011 17:33:29 +0000 (19:33 +0200)]
ASoC: codecs: JZ4740: Convert to table based controls and DAPM setup
Use the newly introduced dapm_widgets, dpam_routes and controls fields of the
snd_soc_dai_driver struct to setup controls and DAPM.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Lars-Peter Clausen [Tue, 12 Apr 2011 17:31:05 +0000 (19:31 +0200)]
ASoC: JZ4740: qi_lb60: Use the SND_SOC_DAPM_EVENT_OFF for the speakers status
Use SND_SOC_DAPM_EVENT_OFF for determining whether the speaker should be turned
on or off instead of open coding it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Lars-Peter Clausen [Tue, 12 Apr 2011 17:31:04 +0000 (19:31 +0200)]
ASoC: JZ4740: qi_lb60: Use gpio_request_array to request and setup gpios
This patch changes the qi_lb60 setup code to use gpio_request_array instead of
manually calling gpio_request and gpio_direction_output for each gpio.
Doing so makes the code a bit more compact.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Lars-Peter Clausen [Tue, 12 Apr 2011 17:31:03 +0000 (19:31 +0200)]
ASoC: JZ4740: Convert qi_lb60 codec to table based DAPM setup
Use the newly introduced dapm_widgets, dpam_routes and fields of the
snd_soc_card struct to setup DAPM.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Lars-Peter Clausen [Tue, 12 Apr 2011 17:31:01 +0000 (19:31 +0200)]
ASoC: Make struct snd_soc_card's dapm_widgets and dapm_routes const
Those should not be modified (and are not) by the core code, so make them const.
This also makes them consistent with the same members of snd_soc_codec.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Wed, 13 Apr 2011 17:33:52 +0000 (10:33 -0700)]
Merge branch 'for-2.6.39' into for-2.6.40
Lars-Peter Clausen [Tue, 12 Apr 2011 17:33:28 +0000 (19:33 +0200)]
ASoC: codecs: JZ4740: Fix OOPS
Commit
ce6120cc(ASoC: Decouple DAPM from CODECs) changed the signature of
snd_soc_dapm_widgets_new to take an pointer to a snd_soc_dapm_context instead of
a snd_soc_codec. The call to snd_soc_dapm_widgets_new in jz4740_codec_dev_probe
was not updated to reflect this change, which results in a compiletime warning
and a runtime OOPS.
Since the core code calls snd_soc_dapm_widgets_new after the codec has been
registered it can be dropped here.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
Mark Brown [Wed, 13 Apr 2011 00:37:52 +0000 (17:37 -0700)]
ASoC: Mark Speyside widgets as ignoring suspend
Allow audio paths through the Speyside system to be kept active while the
system is suspended (for example, when on a voice call) by marking all the
external widgets and the DAI link to the WM1250-EV1 baseband module as
ignoring suspend.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Mark Brown [Tue, 12 Apr 2011 21:15:10 +0000 (14:15 -0700)]
ASoC: Add stub baseband link on Speyside
Demonstrate the connection of a baseband to the system. We add a DAI for
the link to the baseband. This will become visible to the application
layer - audio should be started from the application layer using an
application such as this:
http://opensource.wolfsonmicro.com/~gg/bluetooth-pcm/bluetooth_pcm.c
which starts up audio as for CPU based playback and record up to the point
where data is streamed.
Due to non-availability of baseband simulation hardware we reuse the
configuration for the CPU link with the CODEC acting as clock master,
allowing signals to be observed with a scope. A more standard system
would have separate configuration for the baseband with its own ops
structure and operations. Normally the baseband would be clock master
as the baseband audio will be synchronised to the external telephony
network.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Mark Brown [Tue, 12 Apr 2011 07:09:53 +0000 (00:09 -0700)]
ASoC: Add pin switches for fixed analogue inputs and outputs on Speyside
Pin switches enable direct control of the DAPM state from userspace,
enabling simple enabling and disabling of the path. This is especially
useful for outputs such as the speaker which are composed of several
physical devices as it allows them to be controlled as a group.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Mark Brown [Tue, 12 Apr 2011 07:00:36 +0000 (00:00 -0700)]
ASoC: Add Speyside headset jack detection support
Speyside makes use of support the WM8915 has for detecting the polarity
of the microphone and ground connections on headsets, using a GPIO to
control the polarity of the ground connection and switching between the
two microphone bias supplies available on the device in order to do so.
As a result of this the detection support is more involved than for most
other CODECs, using a callback to configure the current polarity of the
jack and translate this into the board-specific connections required for
the current scenario.
On Android some additional work is required to hook this up to the
application layer as the Android HeadsetObserver monitors a custom
drivers/switch API rather than the standard Linux APIs. This can be
done by either updating HeadsetObserver or modifying the ALSA core to
report via drivers/switch as well.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Mark Brown [Tue, 12 Apr 2011 06:42:25 +0000 (23:42 -0700)]
ASoC: Support the sub speaker driver on Speyside
Speyside includes a WM9081 configured as an external speaker driver taking
an analogue input from HPOUT2 on the WM8915 on the system. Add support for
this to the driver, using a prefix of "Sub" for the WM9081 controls to
ensure we avoid collisions with controls on the WM8915.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Mark Brown [Tue, 12 Apr 2011 06:32:03 +0000 (23:32 -0700)]
ASoC: Optimise clock management for WM8915 Speyside
Dynamically enable and disable the FLL on the WM8915, configuring the
system clock to 256fs for 48kHz when the device is active but reverting
to using the input 32.768kHz clock directly at other times to support
features such as jack detection with minimal power consumption.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Mark Brown [Tue, 12 Apr 2011 06:09:15 +0000 (23:09 -0700)]
ASoC: Add basic widgets for WM8915 Speyside
Provide widgets for the basic widgets connected directly to the WM8915
on Speyside - the headphones, speaker, digital and analogue microphones.
For the outputs this is just documentation, for the inputs this ensures
that the relevant microphone biases are enabled when they are in use.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Mark Brown [Wed, 13 Apr 2011 00:24:39 +0000 (17:24 -0700)]
ASoC: Initial audio support for Speyside on Cragganmore 6410
This is minimal code required to get audio out of the Speyside audio
subsystem on the Wolfson Cragganmore 6410 reference platform. It sets
up the link between the CPU and AIF1 of the WM8915 on the system,
enabling audio playback via the headphone and speaker outputs of the
device (which require no further configuration except runtime). It
allows verification of basic functionality of the system.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Mark Brown [Wed, 13 Apr 2011 00:51:37 +0000 (17:51 -0700)]
ASoC: Create card DAPM widgets early so they can be used in callbacks
This helps with things like setting up the initial state.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Mark Brown [Tue, 12 Apr 2011 06:39:10 +0000 (23:39 -0700)]
ASoC: Move WM8915 FLL operations onto the CODEC
Since the WM8915 FLL is not tied to a particular audio interface move it
to a CODEC wide operation.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Mark Brown [Tue, 12 Apr 2011 04:40:29 +0000 (21:40 -0700)]
ASoC: Fix mis cherry-pick of wm1250-ev1 driver
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Linus Torvalds [Tue, 12 Apr 2011 00:21:51 +0000 (17:21 -0700)]
Linux 2.6.39-rc3
Linus Torvalds [Mon, 11 Apr 2011 22:48:57 +0000 (15:48 -0700)]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: use proper interfaces for on-stack plugging
xfs: fix xfs_debug warnings
xfs: fix variable set but not used warnings
xfs: convert log tail checking to a warning
xfs: catch bad block numbers freeing extents.
xfs: push the AIL from memory reclaim and periodic sync
xfs: clean up code layout in xfs_trans_ail.c
xfs: convert the xfsaild threads to a workqueue
xfs: introduce background inode reclaim work
xfs: convert ENOSPC inode flushing to use new syncd workqueue
xfs: introduce a xfssyncd workqueue
xfs: fix extent format buffer allocation size
xfs: fix unreferenced var error in xfs_buf.c
Also, applied patch from Tony Luck that fixes ia64:
xfs_destroy_workqueues() should not be tagged with__exit
in the branch before merging.
Luck, Tony [Mon, 11 Apr 2011 19:06:12 +0000 (12:06 -0700)]
xfs_destroy_workqueues() should not be tagged with__exit
ia64 throws away .exit sections for the built-in CONFIG case, so routines
that are used in other circumstances should not be tagged as __exit.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 11 Apr 2011 22:45:47 +0000 (15:45 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix data corruption regression by reverting commit
6de9843dab3f
ext4: Allow indirect-block file to grow the file size to max file size
ext4: allow an active handle to be started when freezing
ext4: sync the directory inode in ext4_sync_parent()
ext4: init timer earlier to avoid a kernel panic in __save_error_info
jbd2: fix potential memory leak on transaction commit
ext4: fix a double free in ext4_register_li_request
ext4: fix credits computing for indirect mapped files
ext4: remove unnecessary [cm]time update of quota file
jbd2: move bdget out of critical section
Linus Torvalds [Mon, 11 Apr 2011 22:45:17 +0000 (15:45 -0700)]
Merge branch 'for-2.6.39' of git://linux-nfs.org/~bfields/linux
* 'for-2.6.39' of git://linux-nfs.org/~bfields/linux:
nfsd4: fix oops on lock failure
nfsd: fix auth_domain reference leak on nlm operations
Linus Torvalds [Mon, 11 Apr 2011 22:44:38 +0000 (15:44 -0700)]
Merge branch 'spi/merge' of git://git.secretlab.ca/git/linux-2.6
* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6:
dt/fsldma: fix build warning caused by of_platform_device changes
spi: Fix race condition in stop_queue()
gpio/pch_gpio: Fix output value of pch_gpio_direction_output()
gpio/ml_ioh_gpio: Fix output value of ioh_gpio_direction_output()
gpio/pca953x: fix error handling path in probe() call
Mark Brown [Fri, 8 Apr 2011 07:49:42 +0000 (16:49 +0900)]
ASoC: Add initial WM1250-EV1 Springbank audio I/O module driver
The WM1250-EV1 Springbank audio I/O module for the Wolfson Glenfarclas
reference platform provides a simple audio I/O with an independant clock
domain, intended to simulate cellular modem and bluetooth subsystems
within the platform.
The card supports some limited GPIO based control but this is currently not
implemented.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Mark Brown [Tue, 8 Feb 2011 14:09:41 +0000 (14:09 +0000)]
ASoC: Add WM8915 CODEC driver
The WM8915 is an ultra low power mobile CODEC designed for smartphones,
featuring a mixture of digital and analogue I/O with flexible mixing
options and advanced low power accessory detection functionality in a
compact package.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Kuninori Morimoto [Fri, 8 Apr 2011 05:50:44 +0000 (14:50 +0900)]
ASoC: Add soc_remove_dai_links
card->num_rtd should be 0 after soc_romve_dai_link
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Sangbeom Kim [Sat, 9 Apr 2011 01:57:59 +0000 (10:57 +0900)]
ASoC: SAMSUNG: Add WM8580 PCM Machine driver
This patch add WM8580 PCM machine driver to support PCM audio
on SMDKC110, SMDKV210, SMDK6450, SMDK6440 boards.
Playback and Capture supports 8kHz sampling rates.
and It is tested on SMDKC110, SMDKV210, SMDK6450
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Mon, 11 Apr 2011 20:29:24 +0000 (13:29 -0700)]
Merge branch 'for-2.6.39' into for-2.6.40
Mark Brown [Fri, 8 Apr 2011 07:32:16 +0000 (16:32 +0900)]
ASoC: Fix output PGA enabling in wm_hubs CODECs
The output PGA was not being powered up in headphone and speaker paths,
removing the ability to offer volume control and mute with the output
PGA.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: stable@kernel.org
Lu Guanqun [Sat, 9 Apr 2011 15:03:58 +0000 (23:03 +0800)]
ASoC: sn95031: decorate function with __devexit_p()
According to the comments in include/linux/init.h:
"Pointers to __devexit functions must use __devexit_p(function_name), the
wrapper will insert either the function_name or NULL, depending on the config
options."
Fix this issue in codecs sn95031.
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Sangbeom Kim [Sat, 9 Apr 2011 01:53:58 +0000 (10:53 +0900)]
ASoC: SAMSUNG: Fix the inverted clocks handling for pcm driver
Fix the inverted clocks handling for pcm cpu driver.
By using SND_SOC_DAIFMT_NB_NF, Audio noise can be generated on SMDK.
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Lu Guanqun [Fri, 8 Apr 2011 07:38:48 +0000 (15:38 +0800)]
ASoC: sst_platform: Fix lock acquring
Fix the possible dead lock shown below:
spin_lock
sst_get_stream_status
sst_period_elapsed
intel_sst_interrupt
handle_IRQ_event
handle_fasteoi_irq
do_IRQ
common_interrupt
spin_lock
sst_set_stream_status
sst_platform_pcm_trigger
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Kuninori Morimoto [Fri, 8 Apr 2011 06:09:25 +0000 (15:09 +0900)]
ASoC: fsi: driver safely remove for against irq
free_irq and pm_runtime_disable should be called before
snd_soc_unregister_xxx
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Kuninori Morimoto [Fri, 8 Apr 2011 06:09:17 +0000 (15:09 +0900)]
ASoC: fsi: modify vague PM control on probe
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Kuninori Morimoto [Fri, 8 Apr 2011 06:09:02 +0000 (15:09 +0900)]
ASoC: fsi: take care in failing case of dai register
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Linus Torvalds [Mon, 11 Apr 2011 17:53:11 +0000 (10:53 -0700)]
pci: fix PCI bus allocation alignment handling
In commit
13583b16592a ("PCI: refactor io size calculation code") Ram
had a thinko in the refactorization of the code: the end result used the
variable 'align' for the bus alignment, but the original code used
'min_align'.
Since then, another use of that 'align' variable got introduced by
commit
c8adf9a3e873 ("PCI: pre-allocate additional resources to devices
only after successful allocation of essential resources.")
Fix both of those uses to use 'min_align' as they should.
Daniel Hellstrom <daniel@gaisler.com>
Acked-by: Ram Pai <linuxram@us.ibm.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 11 Apr 2011 14:27:24 +0000 (07:27 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits)
net: Add support for SMSC LAN9530, LAN9730 and LAN89530
mlx4_en: Restoring RX buffer pointer in case of failure
mlx4: Sensing link type at device initialization
ipv4: Fix "Set rt->rt_iif more sanely on output routes."
MAINTAINERS: add entry for Xen network backend
be2net: Fix suspend/resume operation
be2net: Rename some struct members for clarity
pppoe: drop PPPOX_ZOMBIEs in pppoe_flush_dev
dsa/mv88e6131: add support for mv88e6085 switch
ipv6: Enable RFS sk_rxhash tracking for ipv6 sockets (v2)
be2net: Fix a potential crash during shutdown.
bna: Fix for handling firmware heartbeat failure
can: mcp251x: Allow pass IRQ flags through platform data.
smsc911x: fix mac_lock acquision before calling smsc911x_mac_read
iwlwifi: accept EEPROM version 0x423 for iwl6000
rt2x00: fix cancelling uninitialized work
rtlwifi: Fix some warnings/bugs
p54usb: IDs for two new devices
wl12xx: fix potential buffer overflow in testmode nvs push
zd1211rw: reset rx idle timer from tasklet
...
Ira W. Snyder [Thu, 7 Apr 2011 17:33:03 +0000 (10:33 -0700)]
dt/fsldma: fix build warning caused by of_platform_device changes
Commit
000061245a6797d542854106463b6b20fbdcb12e, "dt/powerpc:
Eliminate users of of_platform_{,un}register_driver" forgot to convert
the type of structure passed into platform_device_register() when it
was converted from of_platform_device_register. Fix it.
Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Theodore Ts'o [Mon, 11 Apr 2011 02:30:07 +0000 (22:30 -0400)]
ext4: fix data corruption regression by reverting commit
6de9843dab3f
Revert commit
6de9843dab3f2a1d4d66d80aa9e5782f80977d20, since it
caused a data corruption regression with BitTorrent downloads. Thanks
to Damien for discovering and bisecting to find the problem commit.
https://bugzilla.kernel.org/show_bug.cgi?id=32972
Reported-by: Damien Grassart <damien@grassart.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Kazuya Mio [Mon, 11 Apr 2011 02:06:36 +0000 (22:06 -0400)]
ext4: Allow indirect-block file to grow the file size to max file size
We can create
4402345721856 byte file with indirect block mapping.
However, if we grow an indirect-block file to the size with ftruncate(),
we can see an ext4 warning. The following patch fixes this problem.
How to reproduce:
# dd if=/dev/zero of=/mnt/mp1/hoge bs=1 count=0 seek=
4402345721856
0+0 records in
0+0 records out
0 bytes (0 B) copied, 0.
000221428 s, 0.0 kB/s
# tail -n 1 /var/log/messages
Nov 25 15:10:27 test kernel: EXT4-fs warning (device sda8): ext4_block_to_path:345: block
1074791436 > max in inode 12
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Yongqiang Yang [Mon, 11 Apr 2011 02:06:07 +0000 (22:06 -0400)]
ext4: allow an active handle to be started when freezing
ext4_journal_start_sb() should not prevent an active handle from being
started due to s_frozen. Otherwise, deadlock is easy to happen, below
is a situation.
================================================
freeze | truncate
================================================
| ext4_ext_truncate()
freeze_super() | starts a handle
sets s_frozen |
| ext4_ext_truncate()
| holds i_data_sem
ext4_freeze() |
waits for updates |
| ext4_free_blocks()
| calls dquot_free_block()
|
| dquot_free_blocks()
| calls ext4_dirty_inode()
|
| ext4_dirty_inode()
| trys to start an active
| handle
|
| block due to s_frozen
================================================
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Amir Goldstein <amir73il@users.sf.net>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Curt Wohlgemuth [Mon, 11 Apr 2011 02:05:31 +0000 (22:05 -0400)]
ext4: sync the directory inode in ext4_sync_parent()
ext4 has taken the stance that, in the absence of a journal,
when an fsync/fdatasync of an inode is done, the parent
directory should be sync'ed if this inode entry is new.
ext4_sync_parent(), which implements this, does indeed sync
the dirent pages for parent directories, but it does not
sync the directory *inode*. This patch fixes this.
Also now return error status from ext4_sync_parent().
I tested this using a power fail test, which panics a
machine running a file server getting requests from a
client. Without this patch, on about every other test run,
the server is missing many, many files that had been synced.
With this patch, on > 6 runs, I see zero files being lost.
Google-Bug-Id:
4179519
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Steve Glendinning [Mon, 11 Apr 2011 01:59:27 +0000 (18:59 -0700)]
net: Add support for SMSC LAN9530, LAN9730 and LAN89530
This patch adds support for SMSC's LAN9530, LAN9730 and LAN89530 USB
ethernet controllers to the existing smsc95xx driver by adding
their new USB VID/PID pairs.
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 10 Apr 2011 16:56:10 +0000 (09:56 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: hda - Don't query connections for widgets have no connections
ALSA: HDA: Fix single internal mic on ALC275 (Sony Vaio VPCSB1C5E)
ALSA: hda - HDMI: Fix MCP7x audio infoframe checksums
ALSA: usb-audio: define another USB ID for a buggy USB MIDI cable
ALSA: HDA: Fix dock mic for Lenovo X220-tablet
ASoC: format_register_str: Don't clip register values
ASoC: PXA: Fix oops in __pxa2xx_pcm_prepare
ASoC: zylonite: set .codec_dai_name in initializer
J. Bruce Fields [Mon, 28 Mar 2011 07:15:09 +0000 (15:15 +0800)]
nfsd4: fix oops on lock failure
Lock stateid's can have access_bmap 0 if they were only partially
initialized (due to a failed lock request); handle that case in
free_generic_stateid.
------------[ cut here ]------------
kernel BUG at fs/nfsd/nfs4state.c:380!
invalid opcode: 0000 [#1] SMP
last sysfs file: /sys/kernel/mm/ksm/run
Modules linked in: nfs fscache md4 nls_utf8 cifs ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat bridge stp llc nfsd lockd nfs_acl auth_rpcgss sunrpc ipv6 ppdev parport_pc parport pcnet32 mii pcspkr microcode i2c_piix4 BusLogic floppy [last unloaded: mperf]
Pid: 1468, comm: nfsd Not tainted 2.6.38+ #120 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
EIP: 0060:[<
e24f180d>] EFLAGS:
00010297 CPU: 0
EIP is at nfs4_access_to_omode+0x1c/0x29 [nfsd]
EAX:
ffffffff EBX:
dd758120 ECX:
00000000 EDX:
00000004
ESI:
dd758120 EDI:
ddfe657c EBP:
dd54dde0 ESP:
dd54dde0
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Process nfsd (pid: 1468, ti=
dd54c000 task=
ddc92580 task.ti=
dd54c000)
Stack:
dd54ddf0 e24f19ca 00000000 ddfe6560 dd54de08 e24f1a5d dd758130 deee3a20
ddfe6560 31270000 dd54df1c e24f52fd 0000000f dd758090 e2505dd0 0be304cf
dbb51d68 0000000e ddfe657c ddcd8020 dd758130 dd758128 dd7580d8 dd54de68
Call Trace:
[<
e24f19ca>] free_generic_stateid+0x1c/0x3e [nfsd]
[<
e24f1a5d>] release_lockowner+0x71/0x8a [nfsd]
[<
e24f52fd>] nfsd4_lock+0x617/0x66c [nfsd]
[<
e24e57b6>] ? nfsd_setuser+0x199/0x1bb [nfsd]
[<
e24e056c>] ? nfsd_setuser_and_check_port+0x65/0x81 [nfsd]
[<
c07a0052>] ? _cond_resched+0x8/0x1c
[<
c04ca61f>] ? slab_pre_alloc_hook.clone.33+0x23/0x27
[<
c04cac01>] ? kmem_cache_alloc+0x1a/0xd2
[<
c04835a0>] ? __call_rcu+0xd7/0xdd
[<
e24e0dfb>] ? fh_verify+0x401/0x452 [nfsd]
[<
e24f0b61>] ? nfsd4_encode_operation+0x52/0x117 [nfsd]
[<
e24ea0d7>] ? nfsd4_putfh+0x33/0x3b [nfsd]
[<
e24f4ce6>] ? nfsd4_delegreturn+0xd4/0xd4 [nfsd]
[<
e24ea2c9>] nfsd4_proc_compound+0x1ea/0x33e [nfsd]
[<
e24de6ee>] nfsd_dispatch+0xd1/0x1a5 [nfsd]
[<
e1d6e1c7>] svc_process_common+0x282/0x46f [sunrpc]
[<
e1d6e578>] svc_process+0xdc/0xfa [sunrpc]
[<
e24de0fa>] nfsd+0xd6/0x115 [nfsd]
[<
e24de024>] ? nfsd_shutdown+0x24/0x24 [nfsd]
[<
c0454322>] kthread+0x62/0x67
[<
c04542c0>] ? kthread_worker_fn+0x114/0x114
[<
c07a6ebe>] kernel_thread_helper+0x6/0x10
Code: eb 05 b8 00 00 27 4f 8d 65 f4 5b 5e 5f 5d c3 83 e0 03 55 83 f8 02 89 e5 74 17 83 f8 03 74 05 48 75 09 eb 09 b8 02 00 00 00 eb 0b <0f> 0b 31 c0 eb 05 b8 01 00 00 00 5d c3 55 89 e5 57 56 89 d6 8d
EIP: [<
e24f180d>] nfs4_access_to_omode+0x1c/0x29 [nfsd] SS:ESP 0068:
dd54dde0
---[ end trace
2b0bf6c6557cb284 ]---
The trace route is:
-> nfsd4_lock()
-> if (lock->lk_is_new) {
-> alloc_init_lock_stateid()
3739: stp->st_access_bmap = 0;
->if (status && lock->lk_is_new && lock_sop)
-> release_lockowner()
-> free_generic_stateid()
-> nfs4_access_bmap_to_omode()
-> nfs4_access_to_omode()
380: BUG(); *****
This problem was introduced by
0997b173609b9229ece28941c118a2a9b278796e.
Reported-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Tested-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Linus Torvalds [Sat, 9 Apr 2011 20:23:50 +0000 (13:23 -0700)]
Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6:
mtd: atmel_nand: use CPU I/O when buffer is in vmalloc(ed) region
mtd: atmel_nand: modify test case for using DMA operations
mtd: atmel_nand: fix support for CPUs that do not support DMA access
mtd: atmel_nand: trivial: change DMA usage information trace
mtd: mtdswap: fix printk format warning
Takashi Iwai [Sat, 9 Apr 2011 08:05:53 +0000 (10:05 +0200)]
Merge branch 'fix/hda' into for-linus
Takashi Iwai [Sat, 9 Apr 2011 08:05:30 +0000 (10:05 +0200)]
Merge branch 'fix/asoc' into for-linus
Mark Brown [Sat, 9 Apr 2011 02:33:45 +0000 (11:33 +0900)]
Merge branch 'for-2.6.39' into for-2.6.40
Jassi Brar [Fri, 8 Apr 2011 05:59:42 +0000 (11:29 +0530)]
MAINTAINERS: Update Samsung ASoC maintainer's id
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Wed, 6 Apr 2011 02:38:14 +0000 (11:38 +0900)]
ASoC: Allow DAPM pin operations to match any context
The DAPM pin operations currently require that the specific DAPM context
that the pin being operated in is contained in be specified. With multi
component and especially with the addition of a per-card DAPM context
this isn't ideal as it means that things like disabling unused pins on
CODECs require looking up the CODEC DAPM context.
Fix this by falling back to matching a widget in any context if there isn't
a match in the current context. The code isn't ideal currently but will do
the job.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>