OSDN Git Service
Peter Maydell [Wed, 14 Dec 2011 15:37:19 +0000 (15:37 +0000)]
linux-user: Implement *listxattr syscalls
Implement listxattr, flistxattr and llistxattr syscalls.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Peter Maydell [Wed, 14 Dec 2011 15:37:18 +0000 (15:37 +0000)]
linux-user/syscall.c: Implement f and l versions of set/get/removexattr
Implement the f and l versions (operate on fd, don't follow links)
of the setxattr, getxattr and removexattr syscalls.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Peter Maydell [Wed, 14 Dec 2011 15:37:17 +0000 (15:37 +0000)]
linux-user: Allow NULL value pointer in setxattr and getxattr
It's valid to pass a NULL value pointer to setxattr, so don't
fail this case EFAULT.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Alexander Graf [Wed, 23 Nov 2011 23:44:43 +0000 (00:44 +0100)]
linux-user: fix wait* syscall status returns
When calling wait4 or waitpid with a status pointer and WNOHANG, the
syscall can potentially not modify the status pointer input. Now if we
have guest code like:
int status = 0;
waitpid(pid, &status, WNOHANG);
if (status)
<breakage>
then we have to make sure that in case status did not change we actually
return the guest's initialized status variable instead of our own uninitialized.
We fail to do so today, as we proxy everything through an uninitialized status
variable which for me ended up always containing the last error code.
This patch fixes some test cases when building yast2-core in OBS for ARM.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Peter Maydell [Mon, 21 Nov 2011 12:21:19 +0000 (12:21 +0000)]
linux-user/strace.c: Correct errno printing for mmap etc
Correct the printing of errnos for syscalls which are handled
via print_syscall_ret_addr (mmap, mmap2, brk, shmat): errnos
are returned as negative returned values at this level, not
via the host 'errno' variable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Alexander Graf [Mon, 21 Nov 2011 11:04:07 +0000 (12:04 +0100)]
linux-user: fix QEMU_STRACE=1 segfault
While debugging some issues with QEMU_STRACE I stumbled over segmentation
faults that were pretty reproducible. Turns out we tried to treat a
normal return value as errno, resulting in an access over array boundaries
for the resolution.
Fix this by allowing failure to resolve invalid errnos into strings.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Akos PASZTORY [Mon, 14 Nov 2011 13:09:49 +0000 (15:09 +0200)]
linux-user: add SO_PEERCRED support for getsockopt
Signed-off-by: Akos PASZTORY <akos.pasztory@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
陳韋任 [Tue, 8 Nov 2011 09:46:44 +0000 (17:46 +0800)]
linux-user/main.c: Add option to user-mode emulation so that user can specify log file name
QEMU linux user-mode's default log file name is "/tmp/qemu.log". In order to
change the log file name, user need to modify the source code then recompile
QEMU. This patch allow user use "-D logfile" option to specify the log file
name.
Signed-off-by: Chen Wen-Ren <chenwj@iis.sinica.edu.tw>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Alexander Graf [Wed, 2 Nov 2011 19:23:26 +0000 (20:23 +0100)]
linux-user: fake /proc/self/auxv
Gtk tries to read /proc/self/auxv to find its auxv table instead of
taking it from its own program memory space.
However, when running with linux-user, we see the host's auxv which
clearly exposes wrong information. so let's instead expose the guest
memory backed auxv tables via /proc/self/auxv as well.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Alexander Graf [Wed, 2 Nov 2011 19:23:25 +0000 (20:23 +0100)]
linux-user: fake /proc/self/stat
The boehm gc finds the program's stack starting pointer by
checking /proc/self/stat. Unfortunately, so far it reads
qemu's stack pointer which clearly is wrong.
So let's instead fake the file so the guest program sees the
right address.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Alexander Graf [Wed, 2 Nov 2011 19:23:24 +0000 (20:23 +0100)]
linux-user: fake /proc/self/maps
glibc's pthread_attr_getstack tries to find the stack range from
/proc/self/maps. Unfortunately, /proc is usually the host's /proc
which means linux-user guests see qemu's stack there.
Fake the file with a constructed maps entry that exposes the guest's
stack range.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Alexander Graf [Wed, 2 Nov 2011 19:23:23 +0000 (20:23 +0100)]
linux-user: add open() hijack infrastructure
There are a number of files in /proc that expose host information
to the guest program. This patch adds infrastructure to override
the open() syscall for guest programs to enable us to on the fly
generate guest sensible files.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Alexander Graf [Sat, 28 Jan 2012 19:12:14 +0000 (21:12 +0200)]
linux-user: save auxv length
We create our own AUXV segment on stack and save a pointer to it.
However we don't save the length of it, so any code that wants to
do anything useful with it later on has to walk it again.
Instead, let's remember the length of our AUXV segment. This
simplifies later uses by a lot.
(edited by Riku to apply to qemu HEAD)
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Riku Voipio [Sat, 28 Jan 2012 20:00:17 +0000 (22:00 +0200)]
linux-user: stack_base is now mandatory on all targets
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Michael Roth [Sat, 21 Jan 2012 17:13:53 +0000 (11:13 -0600)]
main-loop: For tools, initialize timers as part of qemu_init_main_loop()
In some cases initializing the alarm timers can lead to non-negligable
overhead from programs that link against qemu-tool.o. At least,
setting a max-resolution WinMM alarm timer via mm_start_timer() (the
current default for Windows) can increase the "tick rate" on Windows
OSs and affect frequency scaling, and in the case of tools that run
in guest OSs such has qemu-ga, the impact can be fairly dramatic
(+20%/20% user/sys time on a core 2 processor was observed from an idle
Windows XP guest).
This patch doesn't address the issue directly (not sure what a good
solution would be for Windows, or what other situations it might be
noticeable), but it at least limits the scope of the issue to programs
that "opt-in" to using the main-loop.c functions by only enabling alarm
timers when qemu_init_main_loop() is called, which is already required
to make use of those facilities, so existing users shouldn't be
affected.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Michael Roth [Sat, 21 Jan 2012 01:08:27 +0000 (19:08 -0600)]
main-loop: Fix SetEvent() on uninitialized handle on win32
The __attribute__((constructor)) init_main_loop() automatically get
called if qemu-tool.o is linked in. On win32, this leads to
a qemu_notify_event() call which attempts to SetEvent() on a HANDLE that
won't be initialized until qemu_init_main_loop() is manually called,
breaking qemu-tools.o programs on Windows at runtime.
This patch checks for an initialized event handle before attempting to
set it, which is analoguous to how we deal with an unitialized
io_thread_fd in the posix implementation.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Mon, 30 Jan 2012 10:27:33 +0000 (11:27 +0100)]
optionroms: Silence intermediate file removal
The build process of optionroms spits out an "rm ..." line. Moreover, it
removes all .o files that can be handy for debugging purposes. So
disable automatic intermediate removal.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Tue, 31 Jan 2012 12:45:31 +0000 (13:45 +0100)]
sdl: Limit sdl_grab_end in handle_activation to Windows hosts
There are scenarios on Linux with some SDL versions where
handle_activation is continuous invoked with state = SDL_APPINPUTFOCUS
and gain = 0 while we grabbed the input. This causes a ping-pong when we
grab the input after an absolute mouse entered the window.
As this sdl_grab_end was once introduced to work around a Windows-only
issue (
0294ffb9c8), limit it to that platform.
CC: Erik Rull <erik.rull@rdsoftware.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Tue, 31 Jan 2012 12:45:30 +0000 (13:45 +0100)]
sdl: Grab input on end of non-absolute mouse click
By grabbing the input already on button down, we leave the button in
that state for the host GUI. Thus it takes another click after releasing
the input again to synchronize the mouse button state.
Avoid this by grabbing on button up.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Tue, 31 Jan 2012 12:45:29 +0000 (13:45 +0100)]
Revert "Handle SDL grabs failing (Mark McLoughlin)"
This reverts commit
6bb816031f8bc0aafc3476e6dfa4293ee3a5f106.
SDL_WM_GrabInput does not reliably bail out if grabbing is impossible.
So if we get here, we already lost and will block. But this can no
longer happen due to the check in sdl_grab_start. So this patch became
obsolete.
Conflicts:
sdl.c
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Tue, 31 Jan 2012 12:45:28 +0000 (13:45 +0100)]
sdl: Fix block prevention of SDL_WM_GrabInput
Consistently check for SDL_APPINPUTFOCUS before trying to grab the input
focus. Just checking for SDL_APPACTIVE doesn't work. Moving the check to
sdl_grab_start allows for some consolidation.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Tue, 31 Jan 2012 12:45:27 +0000 (13:45 +0100)]
sdl: Do not grab mouse on mode switch while in background
When the mouse mode changes to absolute while the SDL windows is not in
focus, refrain from grabbing the input. It would steal from some other
window.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Fri, 27 Jan 2012 18:55:43 +0000 (19:55 +0100)]
Improve default machine options usability
So far we overwrite the machine options completely with defaults if no
accel=value is provided. More user friendly is to fill in only
unspecified options. The new qemu_opts_set_defaults enables this.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Mon, 23 Jan 2012 19:15:12 +0000 (20:15 +0100)]
mc146818rtc: Use lost_tick_policy property
Allow to configure the MC146818 RTC via the new lost tick policy
property and replace rtc_td_hack with this mechanism.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Fri, 27 Jan 2012 18:54:54 +0000 (19:54 +0100)]
qemu-option: Introduce default mechanism
This adds qemu_opts_set_defaults, an interface provide default values
for a QemuOpts set. Default options are parsed from a string and then
prepended to the list of existing options, or they serve as the sole
QemuOpts set.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Mon, 23 Jan 2012 19:15:11 +0000 (20:15 +0100)]
qdev: Introduce lost tick policy property
Potentially tick-generating timer devices will gain a common property:
lock_tick_policy. It allows to encode 4 different ways how to deal with
tick events the guest did not process in time:
discard - ignore lost ticks (e.g. if the guest compensates for them
already)
delay - replay all lost ticks in a row once the guest accepts them
again
merge - if multiple ticks are lost, all of them are merged into one
which is replayed once the guest accepts it again
slew - lost ticks are gradually replayed at a higher frequency than
the original tick
Not all timer device will need to support all modes. However, all need
to accept the configuration via this common property.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Peter Maydell [Wed, 1 Feb 2012 18:50:42 +0000 (18:50 +0000)]
Makefile: Remove linux-headers/asm symlink on distclean
configure creates a linux-headers/asm symlink. Remove this when
doing a distclean.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Peter Maydell [Tue, 17 Jan 2012 13:23:13 +0000 (13:23 +0000)]
exec.c: Clarify comment about tlb_flush() flush_global parameter
Clarify the comment about tlb_flush()'s flush_global parameter,
so it is clearer what it does and why it is OK that the implementation
currently ignores it.
Reviewed-by: Andreas F=C3=A4rber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Aneesh Kumar K.V [Thu, 19 Jan 2012 17:27:11 +0000 (22:57 +0530)]
hw/9pfs: Update MAINTAINERS file
Acked-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Weil [Fri, 27 Jan 2012 17:53:49 +0000 (18:53 +0100)]
MAINTAINERS: Add a section for the host OS and a W32 maintainer
Up to now, there was no special section for the different
host operating systems used with QEMU.
scripts/get_maintainer.pl did not show a maintainer for
OS specific files and patches.
Therefore I added three hosts systems:
* POSIX for the majority of host systems which are supported.
This includes BSD and Linux host systems.
* LINUX is a special case of POSIX needed for some Linux specific
files and directories.
* W32, W64 for a well known family of closed source operating systems.
I also added myself as a maintainer for W32, W64.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Sergei Trofimovich [Tue, 31 Jan 2012 19:03:58 +0000 (22:03 +0300)]
./configure: add link check for nss-smartcard
Current './configure --static && make' fails for me:
LINK qemu-nbd
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lssl3
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lsmime3
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lnssutil3
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lnss3
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lplds4
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lplc4
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lnspr4
My system does not provide static libraries for nss, so
fix autoconfiguration by link checking.
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
CC: qemu-trivial <qemu-trivial@nongnu.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Sergei Trofimovich [Tue, 31 Jan 2012 19:03:45 +0000 (22:03 +0300)]
./configure: request pkg-config to provide private libs when static linking
Added wrapper around pkg-config to allow:
- safe options injection via ${QEMU_PKG_CONFIG_FLAGS}
- spaces in path to pkg-config
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
CC: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Fri, 20 Jan 2012 12:05:00 +0000 (13:05 +0100)]
m48t59: use rtc_clock for alarm timer
This lets the RTC get adjustments from the host NTP client.
The watchdog still uses the vm_clock. The previous behavior is
available with "-rtc clock=vm".
Cc: Andreas Färber <afaerber@suse.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fabien Chouteau [Thu, 26 Jan 2012 17:03:15 +0000 (18:03 +0100)]
GRLIB UART: Add RX channel
This patch implements the RX channel of GRLIB UART with a FIFO to
improve data rate.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Avi Kivity [Sun, 29 Jan 2012 14:47:47 +0000 (16:47 +0200)]
Fix off-by-one in dirty bitmap functions
Reported-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 28 Jan 2012 13:11:20 +0000 (13:11 +0000)]
Merge branch 'target-arm.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm
* 'target-arm.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
Add Cortex-A15 CPU definition
Add dummy implementation of generic timer cp15 registers
arm: store the config_base_register during cpu_reset
target-arm/helper.c: Don't assume softfloat int32 is 32 bits only
target-arm: Fix implementation of TLB invalidate operations
Andreas Färber [Fri, 27 Jan 2012 19:08:52 +0000 (20:08 +0100)]
unin_pci: Fix typos in device names
Commit
999e12bbe85c5dcf49bef13bce4f97399c7105f4 (sysbus: apic: ioapic:
convert to QEMU Object Model) introduced two typos, one of which broke
the mac99 machine.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Wed, 25 Jan 2012 19:37:36 +0000 (13:37 -0600)]
qdev: change ambiguous qdev names
Reported-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 22 Dec 2011 02:57:49 +0000 (20:57 -0600)]
virtio-s390: convert to QEMU Object Model
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Tue, 24 Jan 2012 19:12:29 +0000 (13:12 -0600)]
sysbus: apic: ioapic: convert to QEMU Object Model
This converts three devices because apic and ioapic are subclasses of sysbus.
Converting subclasses independently of their base class is prohibitively hard.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Sun, 4 Dec 2011 18:22:06 +0000 (12:22 -0600)]
pci: convert to QEMU Object Model
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Andreas Färber [Thu, 19 Jan 2012 07:40:18 +0000 (07:40 +0000)]
unin_pci: Drop unused reset handler
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Andreas Färber [Thu, 19 Jan 2012 07:40:17 +0000 (07:40 +0000)]
unin_pci: Drop duplicate busdev
PCIHostState already has a busdev.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Andreas Färber [Thu, 19 Jan 2012 07:40:16 +0000 (07:40 +0000)]
unin_pci: Clean up qdev names
Add -pcihost to SysBus devices to resolve name conflicts,
and clarify PCI vs. Internal PCI.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Anthony Liguori [Sun, 4 Dec 2011 18:38:12 +0000 (12:38 -0600)]
virtio-serial: convert to QEMU Object Model
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 15 Dec 2011 22:31:06 +0000 (16:31 -0600)]
spapr: convert to QEMU Object Model (v2)
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
- use QOM to check for the default console
Anthony Liguori [Thu, 15 Dec 2011 20:50:08 +0000 (14:50 -0600)]
scsi: convert to QEMU Object Model
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Fri, 16 Dec 2011 19:41:12 +0000 (13:41 -0600)]
ide: convert to QEMU Object Model
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Fri, 16 Dec 2011 19:39:51 +0000 (13:39 -0600)]
hda-codec: convert to QEMU Object Model
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Mon, 5 Dec 2011 02:39:20 +0000 (20:39 -0600)]
i2c: smbus: convert to QEMU Object Model
This converts two types because smbus is implemented as a subclass of i2c. It's
extremely difficult to convert these two independently.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Mon, 5 Dec 2011 02:28:27 +0000 (20:28 -0600)]
i2c: rename i2c_slave -> I2CSlave
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Fri, 16 Dec 2011 19:36:39 +0000 (13:36 -0600)]
ssi: convert to QEMU Object Model
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Sun, 4 Dec 2011 18:34:10 +0000 (12:34 -0600)]
ccid: convert to QEMU Object Model
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 15 Dec 2011 20:53:10 +0000 (14:53 -0600)]
usb: convert to QEMU Object Model
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Sun, 4 Dec 2011 17:52:49 +0000 (11:52 -0600)]
isa: pic: convert to QEMU Object Model
This converts two devices at once because PIC subclasses ISA and converting
subclasses independently is extremely hard.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Wed, 7 Dec 2011 01:32:44 +0000 (19:32 -0600)]
qdev: prepare source tree for code conversion
These are various small stylistic changes which help make things more
consistent such that the automated conversion script can be simpler.
It's not necessary to agree or disagree with these style changes because all
of this code is going to be rewritten by the patch monkey script anyway.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Sun, 4 Dec 2011 20:37:06 +0000 (14:37 -0600)]
qdev: add class_init to DeviceInfo
Since we are still dynamically creating TypeInfo, we need to chain the
class_init function in order to be able to make use of it within subclasses of
TYPE_DEVICE.
This will disappear once we register TypeInfos directly.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 15 Dec 2011 20:40:29 +0000 (14:40 -0600)]
qdev: add a interface to register subclasses
In order to introduce inheritance while still using the qdev registration
interfaces, we need to be able to use a parent other than TYPE_DEVICE. Add a
new interface that allows this.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Sun, 4 Dec 2011 17:36:01 +0000 (11:36 -0600)]
qdev: use a wrapper to access reset and promote reset to a class method
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Sun, 4 Dec 2011 17:17:51 +0000 (11:17 -0600)]
qdev: don't access name through info
We already have a QOM interface for this so let's use it.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Sun, 4 Dec 2011 17:08:36 +0000 (11:08 -0600)]
qdev: move qdev->info to class
Right now, DeviceInfo acts as the class for qdev. In order to switch to a
proper ObjectClass derivative, we need to ween all of the callers off of
interacting directly with the info pointer.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Fri, 16 Dec 2011 20:34:46 +0000 (14:34 -0600)]
qdev: integrate with QEMU Object Model (v2)
This is a very shallow integration. We register a TYPE_DEVICE but only use
QOM as basically a memory allocator. This will make all devices show up as
QOM objects but they will all carry the TYPE_DEVICE.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
- update for new location of object.h
Anthony Liguori [Sat, 3 Dec 2011 23:10:08 +0000 (17:10 -0600)]
qom: add the base Object class (v2)
This class provides the main building block for QEMU Object Model and is
extensively documented in the header file. It is largely inspired by GObject.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
- remove printf() in type registration
- fix typo in comment (Paolo)
- make Interface private
- move object into a new directory and move header into include/qemu/
- don't make object.h depend on qemu-common.h
- remove Type and replace it with TypeImpl * (Paolo)
- use hash table to store types (Paolo)
- aggressively cache parent type (Paolo)
- make a type_register and use it with interfaces (Paolo)
- fix interface cast comment (Paolo)
- add a few more functions required in later series
Anthony Liguori [Sun, 4 Dec 2011 17:40:58 +0000 (11:40 -0600)]
pci: call reset unconditionally
Because now all PCI devices are converted to qdev.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Wed, 21 Dec 2011 22:18:02 +0000 (16:18 -0600)]
openpic: remove dead code to make a PCI device version
bus is always NULL so the code in this if clause is dead (and therefore
untested).
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Wed, 21 Dec 2011 22:14:09 +0000 (16:14 -0600)]
macio: convert to qdev
This is a "shallow", half hearted, and untested conversion.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Fri, 27 Jan 2012 15:00:03 +0000 (09:00 -0600)]
Merge remote-tracking branch 'pmaydell/arm-devs.for-upstream' into staging
* pmaydell/arm-devs.for-upstream:
arm: SoC model for Calxeda Highbank
arm_boot: support board IDs more than 16 bits wide
arm: add secondary cpu boot callbacks to arm_boot.c
ahci: add support for non-PCI based controllers
Add xgmac ethernet model
Anthony Liguori [Fri, 27 Jan 2012 14:58:52 +0000 (08:58 -0600)]
Merge remote-tracking branch 'kwolf/for-anthony' into staging
* kwolf/for-anthony: (22 commits)
scsi: Guard against buflen exceeding req->cmd.xfer in scsi_disk_emulate_command
qcow: Use bdrv functions to replace file operation
qcow: Return real error code in qcow_open
block/vdi: Zero unused parts when allocating a new block (fix #919242)
virtio-blk: add virtio_blk_handle_read trace event
docs: describe live block operations
block: add support for partial streaming
add QERR_BASE_NOT_FOUND
block: add bdrv_find_backing_image
blockdev: make image streaming safe across hotplug
qmp: add query-block-jobs
qmp: add block_job_cancel command
qmp: add block_job_set_speed command
qmp: add block_stream command
block: rate-limit streaming operations
block: add image streaming block job
block: add BlockJob interface for long-running operations
block: make copy-on-read a per-request flag
block: check bdrv_in_use() before blockdev operations
coroutine: add co_sleep_ns() coroutine sleep function
...
Laszlo Ersek [Tue, 24 Jan 2012 20:13:28 +0000 (21:13 +0100)]
qemu-io: end aio help text sentences with periods
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Sergei Trofimovich [Tue, 24 Jan 2012 17:42:40 +0000 (20:42 +0300)]
./configure: export xfs config via --{enable, disable}-xfsctl
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Jan Kiszka [Tue, 24 Jan 2012 12:47:56 +0000 (13:47 +0100)]
pcnet: Preserve link state across device reset
A device reset does not affect the link state, only set_link does.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Jan Kiszka [Tue, 24 Jan 2012 12:47:46 +0000 (13:47 +0100)]
e1000: Preserve link state across device reset
A device reset does not affect the link state, only set_link does.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Jan Kiszka [Sat, 21 Jan 2012 13:43:07 +0000 (14:43 +0100)]
qdev-property: Make bit property parsing stricter
By using strncasecmp, we allow for arbitrary characters after the
"on"/"off" string. Fix this by switching to strcasecmp.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Paolo Bonzini [Fri, 20 Jan 2012 11:05:22 +0000 (12:05 +0100)]
remove #if 0 code for timers
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Thomas Higdon [Tue, 24 Jan 2012 17:19:44 +0000 (12:19 -0500)]
scsi: Guard against buflen exceeding req->cmd.xfer in scsi_disk_emulate_command
Limit the return value (corresponding to the length of the buffer to be
DMAed back to the intiator) to the value in req->cmd.xfer, which is the
amount of data that the initiator expects. Eliminate now-duplicate code
that does this guarding in the functions for individual commands.
Without this, the SCRIPTS code in the emulated LSI device eventually
raises a DMA interrupt for a data overrun when an INQUIRY command whose
buflen exceeds req->cmd.xfer is processed. It's the responsibility of
the client to provide a request buffer and allocation length that are
large enough for the result of the command.
Signed-off-by: Thomas Higdon <thigdon@akamai.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Li Zhi Hui [Mon, 21 Nov 2011 07:40:39 +0000 (15:40 +0800)]
qcow: Use bdrv functions to replace file operation
Since common file operation functions lack of error detection and use
much more I/O syscalls, so change them to bdrv series functions and
reduce I/O request.
Signed-off-by: Li Zhi Hui <zhihuili@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Li Zhi Hui [Thu, 15 Dec 2011 10:14:00 +0000 (18:14 +0800)]
qcow: Return real error code in qcow_open
Signed-off-by: Li Zhi Hui <zhihuili@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Weil [Sat, 21 Jan 2012 12:54:24 +0000 (13:54 +0100)]
block/vdi: Zero unused parts when allocating a new block (fix #919242)
The new block was filled with zero when it was allocated by g_malloc0,
but when it was reused later and only partially used, data from the
previously allocated block were still present and written to the new
block.
This caused the problems reported by bug #919242
(https://bugs.launchpad.net/qemu/+bug/919242).
Now the unused parts of the new block which are before and after the data
are always filled with zero, so it is no longer necessary to zero the whole
block with g_malloc0.
I also updated the copyright comment.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Thu, 22 Dec 2011 13:17:02 +0000 (13:17 +0000)]
virtio-blk: add virtio_blk_handle_read trace event
There already exists a virtio_blk_handle_write trace event as well as
completion events. Add the virtio_blk_handle_read event so it's easy to
trace virtio-blk requests for both read and write operations.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Marcelo Tosatti [Wed, 18 Jan 2012 14:40:54 +0000 (14:40 +0000)]
docs: describe live block operations
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Marcelo Tosatti [Wed, 18 Jan 2012 14:40:53 +0000 (14:40 +0000)]
block: add support for partial streaming
Add support for streaming data from an intermediate section of the
image chain (see patch and documentation for details).
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Marcelo Tosatti [Wed, 18 Jan 2012 14:40:52 +0000 (14:40 +0000)]
add QERR_BASE_NOT_FOUND
This qerror will be raised when a given streaming base (backing file)
cannot be found.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Marcelo Tosatti [Wed, 18 Jan 2012 14:40:51 +0000 (14:40 +0000)]
block: add bdrv_find_backing_image
Add bdrv_find_backing_image: given a BlockDriverState pointer, and an id,
traverse the backing image chain to locate the id.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Wed, 18 Jan 2012 14:40:50 +0000 (14:40 +0000)]
blockdev: make image streaming safe across hotplug
Unplugging a storage interface like virtio-blk causes the host block
device to be deleted too. Long-running operations like block migration
must take a DriveInfo reference to prevent the BlockDriverState from
being freed. For image streaming we can do the same thing.
Note that it is not possible to acquire/release the drive reference in
block.c where the block job functions live because
drive_get_ref()/drive_put_ref() are blockdev.c functions. Calling them
from block.c would be a layering violation - tools like qemu-img don't
even link against blockdev.c.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Wed, 18 Jan 2012 14:40:49 +0000 (14:40 +0000)]
qmp: add query-block-jobs
Add query-block-jobs, which shows the progress of ongoing block device
operations.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Wed, 18 Jan 2012 14:40:48 +0000 (14:40 +0000)]
qmp: add block_job_cancel command
Add block_job_cancel, which stops an active block streaming operation.
When the operation has been cancelled the new BLOCK_JOB_CANCELLED event
is emitted.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Wed, 18 Jan 2012 14:40:47 +0000 (14:40 +0000)]
qmp: add block_job_set_speed command
Add block_job_set_speed, which sets the maximum speed for a background
block operation.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Wed, 18 Jan 2012 14:40:46 +0000 (14:40 +0000)]
qmp: add block_stream command
Add the block_stream command, which starts copy backing file contents
into the image file. Also add the BLOCK_JOB_COMPLETED QMP event which
is emitted when image streaming completes. Later patches add control
over the background copy speed, cancelation, and querying running
streaming operations.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Rob Herring [Thu, 26 Jan 2012 11:43:49 +0000 (11:43 +0000)]
arm: SoC model for Calxeda Highbank
Adds support for Calxeda's Highbank SoC.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 26 Jan 2012 11:43:48 +0000 (11:43 +0000)]
arm_boot: support board IDs more than 16 bits wide
Support passing a board ID value to the kernel in r1
that is more than 16 bits wide. This is needed to pass
the '-1 == invalid' value for boards which only support
device tree booting.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Mark Langsdorf [Thu, 26 Jan 2012 11:43:48 +0000 (11:43 +0000)]
arm: add secondary cpu boot callbacks to arm_boot.c
Create two functions, write_secondary_boot() and secondary_cpu_reset_hook(),
to allow platforms more control of how secondary CPUs are brought up. The
new functions default to NULL and aren't called unless they are populated
so there are no changes to existing platform models.
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rob Herring [Thu, 26 Jan 2012 11:43:47 +0000 (11:43 +0000)]
ahci: add support for non-PCI based controllers
Add support for ahci on sysbus.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rob Herring [Thu, 26 Jan 2012 11:43:47 +0000 (11:43 +0000)]
Add xgmac ethernet model
This adds very basic support for the xgmac ethernet core. Missing things
include:
- statistics counters
- WoL support
- rx checksum offload
- chained descriptors (only linear descriptor ring)
- broadcast and multicast handling
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Stefan Hajnoczi [Wed, 18 Jan 2012 14:40:45 +0000 (14:40 +0000)]
block: rate-limit streaming operations
This patch implements rate-limiting for image streaming. If we've
exceeded the bandwidth quota for a 100 ms time slice we sleep the
coroutine until the next slice begins.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Wed, 18 Jan 2012 14:40:44 +0000 (14:40 +0000)]
block: add image streaming block job
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Wed, 18 Jan 2012 14:40:43 +0000 (14:40 +0000)]
block: add BlockJob interface for long-running operations
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Wed, 18 Jan 2012 14:40:42 +0000 (14:40 +0000)]
block: make copy-on-read a per-request flag
Previously copy-on-read could only be enabled for all requests to a
block device. This means requests coming from the guest as well as
QEMU's internal requests would perform copy-on-read when enabled.
For image streaming we want to support finer-grained behavior than just
populating the image file from its backing image. Image streaming
supports partial streaming where a common backing image is preserved.
In this case guest requests should not perform copy-on-read because they
would indiscriminately copy data which should be left in a backing image
from the backing chain.
Introduce a per-request flag for copy-on-read so that a block device can
process both regular and copy-on-read requests. Overlapping reads and
writes still need to be serialized for correctness when copy-on-read is
happening, so add an in-flight reference count to track this.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Wed, 18 Jan 2012 14:40:41 +0000 (14:40 +0000)]
block: check bdrv_in_use() before blockdev operations
Long-running block operations like block migration and image streaming
must have continual access to their block device. It is not safe to
perform operations like hotplug, eject, change, resize, commit, or
external snapshot while a long-running operation is in progress.
This patch adds the missing bdrv_in_use() checks so that block migration
and image streaming never have the rug pulled out from underneath them.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Wed, 18 Jan 2012 14:40:40 +0000 (14:40 +0000)]
coroutine: add co_sleep_ns() coroutine sleep function
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Mon, 16 Jan 2012 09:28:06 +0000 (09:28 +0000)]
block: replace unchecked strdup/malloc/calloc with glib
Most of the codebase as been converted to use glib memory allocation
functions. There are still a few instances of malloc/calloc in the
block layer and qemu-io. Replace them, especially since they do not
check the strdup/malloc/calloc return value.
Reported-by: Dr David Alan Gilbert <davidagilbert@uk.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>