run-coverity-scan: support --update-tools-only --docker

Just build the container when run-coverity-scan is invoked with
--update-tools-only --docker.  This requires moving the "docker build"
logic into the update_coverity_tools function.

The only snag is that --update-tools-only --docker requires access to
the dockerfile.  For now just report an error for --src-tarball, and
"docker build" will fail if not in a source tree.  Another possibility
could be to host our container images on a public registry, and use
"FROM qemu:fedora" to make the Dockerfile small enough that it can be
included directly in the run-coverity-scan script.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

run-coverity-scan: download tools outside the container

This lets us look at coverity_tool.md5 across executions of run-coverity-scan
and skip the download.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

run-coverity-scan: use --no-update-tools in docker run

Tools are already updated via the docker build.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

run-coverity-scan: add --no-update-tools option

Provide a quick way to skip building the container while we figure out how
to get caching right.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

run-coverity-scan: use docker.py

Our trusted docker wrapper allows run-coverity-scan to run with both
docker and podman.

For the "run" phase this is transparent; for the "build" phase however
scripts are replaced with a bind mount (-v).  This is not an issue
because the secret option is meant for secrets stored globally in the
system and bind mounts are a valid substitute for secrets that are known
to whoever builds the container.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

run-coverity-scan: get Coverity token and email from special git config section

Support a [coverity] section in .git/config.  It can be used to retrieve the
token and also, if it is different from user.email, the username of the
submitter.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

docker.py/build: support binary files in --extra-files

Read the --extra-files in binary mode to avoid encoding errors.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

docker.py/build: support -t and -f arguments

The docker.py command line is subtly different from docker and podman's,
in that the tag and Dockerfile are passed via positional arguments.
Remove this gratuitous difference and just parse -f and -t.

-f was previously used by --extra-files, only keep the long option.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge remote-tracking branch 'remotes/philmd-gitlab/tags/sparc-next-20200609' into staging

SPARC patches

HW:
- Use UNIMP device instead of EMPTY_SLOT
- Make EMPTY_SLOT similar to UNIMP device
- Map UART devices unconditionally
- Pair of fixes for AHB PnP
- Add trace events to AHB PnP

TCG:
- Improve exception logging

CI:
- https://gitlab.com/philmd/qemu/-/pipelines/154231191
- https://travis-ci.org/github/philmd/qemu/builds/696321130

# gpg: Signature made Tue 09 Jun 2020 08:24:09 BST
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd-gitlab/tags/sparc-next-20200609:
  target/sparc/int32_helper: Extract and use excp_name_str()
  target/sparc/int32_helper: Remove DEBUG_PCALL definition
  hw/timer/grlib_gptimer: Display frequency in decimal
  hw/misc/grlib_ahb_apb_pnp: Add trace events on read accesses
  hw/misc/grlib_ahb_apb_pnp: Fix AHB PnP 8-bit accesses
  hw/misc/grlib_ahb_apb_pnp: Avoid crash when writing to AHB PnP registers
  hw/sparc64/niagara: Remove duplicated NIAGARA_UART_BASE definition
  hw/sparc64/niagara: Map the UART device unconditionally
  hw/sparc/leon3: Map the UART device unconditionally
  hw/misc/empty_slot: Name the slots when created
  hw/misc/empty_slot: Move the 'hw/misc' and cover in MAINTAINERS
  hw/misc/empty_slot: Convert debug printf() to trace event
  hw/misc/empty_slot: Add a 'name' qdev property
  hw/misc/empty_slot: Convert 'size' field as qdev property
  hw/misc/empty_slot: Lower address space priority
  hw/sparc/sun4m: Use UnimplementedDevice for I/O devices

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/sparc/int32_helper: Extract and use excp_name_str()

Improve exception error report:

Before:

  qemu: fatal: Trap 0x06 while interrupts disabled, Error state

After:

  qemu: fatal: Trap 0x06 (Window Underflow) while interrupts disabled, Error state

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-Id: <20200331105048.27989-8-f4bug@amsat.org>

target/sparc/int32_helper: Remove DEBUG_PCALL definition

We define DEBUG_PCALL since b884fc5e (2012-10-06).
7.5 years later it is safe to assume we can remove it :)

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-Id: <20200331105048.27989-7-f4bug@amsat.org>

hw/timer/grlib_gptimer: Display frequency in decimal

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-Id: <20200331105048.27989-6-f4bug@amsat.org>

hw/misc/grlib_ahb_apb_pnp: Add trace events on read accesses

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-Id: <20200331105048.27989-5-f4bug@amsat.org>

hw/misc/grlib_ahb_apb_pnp: Fix AHB PnP 8-bit accesses

The Plug & Play region of the AHB/APB bridge can be accessed
by various word size, however the implementation is clearly
restricted to 32-bit:

  static uint64_t grlib_ahb_pnp_read(void *opaque, hwaddr offset, unsigned size)
  {
      AHBPnp *ahb_pnp = GRLIB_AHB_PNP(opaque);

      return ahb_pnp->regs[offset >> 2];
  }

Similarly to commit 0fbe394a64 with the APB PnP registers,
set the MemoryRegionOps::impl min/max fields to 32-bit, so
memory.c::access_with_adjusted_size() can adjust when the
access is not 32-bit.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-Id: <20200331105048.27989-4-f4bug@amsat.org>

hw/misc/grlib_ahb_apb_pnp: Avoid crash when writing to AHB PnP registers

Similarly to commit 158b659451 with the APB PnP registers, guests
can crash QEMU when writting to the AHB PnP registers:

  $ echo 'writeb 0xfffff042 69' | qemu-system-sparc -M leon3_generic -S -bios /etc/magic -qtest stdio
  [I 1571938309.932255] OPENED
  [R +0.063474] writeb 0xfffff042 69
  Segmentation fault (core dumped)

  (gdb) bt
  #0  0x0000000000000000 in  ()
  #1  0x0000562999110df4 in memory_region_write_with_attrs_accessor
      (mr=mr@entry=0x56299aa28ea0, addr=66, value=value@entry=0x7fff6abe13b8, size=size@entry=1, shift=<optimized out>, mask=mask@entry=255, attrs=...) at memory.c:503
  #2  0x000056299911095e in access_with_adjusted_size
      (addr=addr@entry=66, value=value@entry=0x7fff6abe13b8, size=size@entry=1, access_size_min=<optimized out>, access_size_max=<optimized out>, access_fn=access_fn@entry=
      0x562999110d70 <memory_region_write_with_attrs_accessor>, mr=0x56299aa28ea0, attrs=...) at memory.c:539
  #3  0x0000562999114fba in memory_region_dispatch_write (mr=mr@entry=0x56299aa28ea0, addr=66, data=<optimized out>, op=<optimized out>, attrs=attrs@entry=...) at memory.c:1482
  #4  0x00005629990c0860 in flatview_write_continue
      (fv=fv@entry=0x56299aa7d8a0, addr=addr@entry=4294963266, attrs=..., ptr=ptr@entry=0x7fff6abe1540, len=len@entry=1, addr1=<optimized out>, l=<optimized out>, mr=0x56299aa28ea0)
      at include/qemu/host-utils.h:164
  #5  0x00005629990c0a76 in flatview_write (fv=0x56299aa7d8a0, addr=4294963266, attrs=..., buf=0x7fff6abe1540, len=1) at exec.c:3165
  #6  0x00005629990c4c1b in address_space_write (as=<optimized out>, addr=<optimized out>, attrs=..., attrs@entry=..., buf=buf@entry=0x7fff6abe1540, len=len@entry=1) at exec.c:3256
  #7  0x000056299910f807 in qtest_process_command (chr=chr@entry=0x5629995ee920 <qtest_chr>, words=words@entry=0x56299acfcfa0) at qtest.c:437

Instead of crashing, log the access as unimplemented.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-Id: <20200331105048.27989-3-f4bug@amsat.org>

hw/sparc64/niagara: Remove duplicated NIAGARA_UART_BASE definition

NIAGARA_UART_BASE is already defined few lines earlier.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200608172144.20461-3-f4bug@amsat.org>

hw/sparc64/niagara: Map the UART device unconditionally

The UART is present on the machine regardless there is a
character device connected to it. Map it unconditionally.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200608172144.20461-4-f4bug@amsat.org>

hw/sparc/leon3: Map the UART device unconditionally

The UART is present on the chipset regardless there is a
character device connected to it. Map it unconditionally.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-Id: <20200608172144.20461-2-f4bug@amsat.org>

hw/misc/empty_slot: Name the slots when created

Directly set the slot name when creating the device,
to display the device name in trace events.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200510152840.13558-8-f4bug@amsat.org>

hw/misc/empty_slot: Move the 'hw/misc' and cover in MAINTAINERS

Add an entry for the 'empty_slot' device.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200510152840.13558-7-f4bug@amsat.org>

hw/misc/empty_slot: Convert debug printf() to trace event

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200510152840.13558-6-f4bug@amsat.org>

hw/misc/empty_slot: Add a 'name' qdev property

Add a 'name' qdev property so when multiple slots are
accessed, we can notice which one is accessed.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200510152840.13558-5-f4bug@amsat.org>

hw/misc/empty_slot: Convert 'size' field as qdev property

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200510152840.13558-4-f4bug@amsat.org>

hw/misc/empty_slot: Lower address space priority

Empty slots model RAZ/WI access on a bus. Since we can still
(hot) plug devices on the bus, lower the slot priority, so
device added later is accessed first.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200510152840.13558-3-f4bug@amsat.org>

hw/sparc/sun4m: Use UnimplementedDevice for I/O devices

These devices are not slots on a bus, but real I/O devices
that we do not implement. As the ISDN ROM would be a ROMD
device, also model it as UnimplementedDevice.

Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200510152840.13558-2-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-5.1-pull-request' into staging

linux-user pull request 20200605-v2

Implement F_OFD_ fcntl() command, /proc/cpuinfo for hppa
Fix socket(), prnctl() error codes, underflow in target_mremap,
    epoll_create() strace, oldumount for alpha
User-mode build dependencies improvement

# gpg: Signature made Sat 06 Jun 2020 14:15:36 BST
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-5.1-pull-request:
  stubs: Restrict ui/win32-kbd-hook to system-mode
  hw/core: Restrict CpuClass::get_crash_info() to system-mode
  target/s390x: Restrict CpuClass::get_crash_info() to system-mode
  target/i386: Restrict CpuClass::get_crash_info() to system-mode
  arch_init: Remove unused 'qapi-commands-misc.h' include
  exec: Assert CPU migration is not used on user-only build
  target/riscv/cpu: Restrict CPU migration to system-mode
  stubs/Makefile: Reduce the user-mode object list
  util/Makefile: Reduce the user-mode object list
  tests/Makefile: Restrict some softmmu-only tests
  tests/Makefile: Only display TCG-related tests when TCG is available
  configure: Avoid building TCG when not needed
  Makefile: Only build virtiofsd if system-mode is enabled
  linux-user: implement OFD locks
  linux-user/mmap.c: fix integer underflow in target_mremap
  linux-user/strace.list: fix epoll_create{,1} -strace output
  linux-user: Add support for /proc/cpuinfo on hppa platform
  linux-user: return target error codes for socket() and prctl()
  linux-user, alpha: fix oldumount syscall

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200605' into staging

target-arm queue:
 hw/ssi/imx_spi: Handle tx burst lengths other than 8 correctly
 hw/input/pxa2xx_keypad: Replace hw_error() by qemu_log_mask()
 hw/arm/pxa2xx: Replace printf() call by qemu_log_mask()
 target/arm: Convert crypto insns to gvec
 hw/adc/stm32f2xx_adc: Correct memory region size and access size
 tests/acceptance: Add a boot test for the xlnx-versal-virt machine
 docs/system: Document Aspeed boards
 raspi: Add model of the USB controller
 target/arm: Convert 2-reg-and-shift and 1-reg-imm Neon insns to decodetree

# gpg: Signature made Fri 05 Jun 2020 17:48:39 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20200605: (29 commits)
  target/arm: Convert Neon one-register-and-immediate insns to decodetree
  target/arm: Convert VCVT fixed-point ops to decodetree
  target/arm: Convert Neon VSHLL, VMOVL to decodetree
  target/arm: Convert Neon narrowing shifts with op==9 to decodetree
  target/arm: Convert Neon narrowing shifts with op==8 to decodetree
  target/arm: Convert VQSHLU, VQSHL 2-reg-shift insns to decodetree
  target/arm: Convert Neon VSRA, VSRI, VRSHR, VRSRA 2-reg-shift insns to decodetree
  target/arm: Convert Neon VSHR 2-reg-shift insns to decodetree
  target/arm: Convert Neon VSHL and VSLI 2-reg-shift insn to decodetree
  raspi2 acceptance test: add test for dwc-hsotg (dwc2) USB host
  wire in the dwc-hsotg (dwc2) USB host controller emulation
  usb: add short-packet handling to usb-storage driver
  dwc-hsotg (dwc2) USB host controller emulation
  dwc-hsotg (dwc2) USB host controller state definitions
  dwc-hsotg (dwc2) USB host controller register definitions
  raspi: add BCM2835 SOC MPHI emulation
  docs/system: Document Aspeed boards
  tests/acceptance: Add a boot test for the xlnx-versal-virt machine
  hw/adc/stm32f2xx_adc: Correct memory region size and access size
  target/arm: Split helper_crypto_sm3tt
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

stubs: Restrict ui/win32-kbd-hook to system-mode

In Makefile.objs, the ui/ directory is restricted to system-mode:

 43 ifeq ($(CONFIG_SOFTMMU),y)
 ...
 65 common-obj-y += ui/
 66 common-obj-m += ui/
 ...
 82 endif # CONFIG_SOFTMMU

Restrict the ui/ stub added in commit 2df9f5718df to only build
it for system-mode emulation.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200522172510.25784-14-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

hw/core: Restrict CpuClass::get_crash_info() to system-mode

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200522172510.25784-13-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/s390x: Restrict CpuClass::get_crash_info() to system-mode

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200522172510.25784-12-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/i386: Restrict CpuClass::get_crash_info() to system-mode

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200522172510.25784-11-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

arch_init: Remove unused 'qapi-commands-misc.h' include

Commit ffaee83bcb2 moved qmp_query_target but forgot to remove
this include.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200522172510.25784-10-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

exec: Assert CPU migration is not used on user-only build

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200522172510.25784-9-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/riscv/cpu: Restrict CPU migration to system-mode

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200522172510.25784-8-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

stubs/Makefile: Reduce the user-mode object list

These stubs are not required when configured with --disable-system.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200522172510.25784-7-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

util/Makefile: Reduce the user-mode object list

These objects are not required when configured with --disable-system.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200522172510.25784-6-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

tests/Makefile: Restrict some softmmu-only tests

In the next commit we are going to remove some objects from the
util-obj-y variable (objects which are not used by user-mode,
when configured with --disable-system).
Then some system-mode tests are going to fail, due to the missing
objects:

  $ make check-unit -k
    LINK    tests/test-iov
  /usr/bin/ld: tests/test-iov.o: in function `iov_from_buf':
  include/qemu/iov.h:49: undefined reference to `iov_from_buf_full'
  make: *** [rules.mak:124: tests/test-iov] Error 1
    LINK    tests/test-timed-average
  /usr/bin/ld: tests/test-timed-average.o: in function `account':
  tests/test-timed-average.c:27: undefined reference to `timed_average_account'
  make: *** [rules.mak:124: tests/test-timed-average] Error 1
    LINK    tests/test-util-filemonitor
  /usr/bin/ld: tests/test-util-filemonitor.o: in function `qemu_file_monitor_test_event_loop':
  tests/test-util-filemonitor.c:83: undefined reference to `main_loop_wait'
  make: *** [rules.mak:124: tests/test-util-filemonitor] Error 1
    LINK    tests/test-util-sockets
  /usr/bin/ld: tests/test-util-sockets.o: in function `test_socket_fd_pass_name_good':
  tests/test-util-sockets.c:91: undefined reference to `socket_connect'
  make: *** [rules.mak:124: tests/test-util-sockets] Error 1
    LINK    tests/test-base64
  /usr/bin/ld: tests/test-base64.o: in function `test_base64_good':
  tests/test-base64.c:35: undefined reference to `qbase64_decode'
  collect2: error: ld returned 1 exit status
  make: *** [rules.mak:124: tests/test-base64] Error 1
    LINK    tests/test-bufferiszero
  /usr/bin/ld: tests/test-bufferiszero.o: in function `test_1':
  tests/test-bufferiszero.c:31: undefined reference to `buffer_is_zero'
  make: *** [rules.mak:124: tests/test-bufferiszero] Error 1
  make: Target 'check-unit' not remade because of errors.

Instead, restrict these tests to system-mode, by using the
$(CONFIG_SOFTMMU) variable.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200522172510.25784-5-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

tests/Makefile: Only display TCG-related tests when TCG is available

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200522172510.25784-4-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

configure: Avoid building TCG when not needed

Avoid building TCG when building only tools:

  ./configure --enable-tools --disable-system --disable-user

This saves us from running the soft-float tests enabled since
commit 76170102508.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200522172510.25784-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Makefile: Only build virtiofsd if system-mode is enabled

Do not build the virtiofsd helper when configured with
--disable-system.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200522172510.25784-2-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user: implement OFD locks

Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <mvm7dx0cun3.fsf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/mmap.c: fix integer underflow in target_mremap

Fixes: https://bugs.launchpad.net/bugs/1876373

This code path in mmap occurs when a page size is decreased with mremap.  When a section of pages is shrunk, qemu calls mmap_reserve on the pages that were released.  However, it has the diff operation reversed, subtracting the larger old_size from the smaller new_size.  Instead, it should be subtracting the smaller new_size from the larger old_size.  You can also see in the previous line of the change that this mmap_reserve call only occurs when old_size > new_size.

Bug: https://bugs.launchpad.net/qemu/+bug/1876373
Signed-off-by: Jonathan Marler <johnnymarler@gmail.com>
Reviewded-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200502161225.14346-1-johnnymarler@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/strace.list: fix epoll_create{,1} -strace output

Fix syscall name and parameters priinter.

Before the change:

```
$ alpha-linux-user/qemu-alpha -strace -L /usr/alpha-unknown-linux-gnu/ /tmp/a
...
1274697 %s(%d)(2097152,274903156744,274903156760,274905840712,274877908880,274903235616) = 3
1274697 exit_group(0)
```

After the change:

```
$ alpha-linux-user/qemu-alpha -strace -L /usr/alpha-unknown-linux-gnu/ /tmp/a
...
1273719 epoll_create1(2097152) = 3
1273719 exit_group(0)
```

Fixes: 9cbc0578cb6 ("Improve output of various syscalls")
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
CC: Riku Voipio <riku.voipio@iki.fi>
CC: Laurent Vivier <laurent@vivier.eu>
Cc: qemu-stable@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200416175957.1274882-1-slyfox@gentoo.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user: Add support for /proc/cpuinfo on hppa platform

Provide our own /proc/cpuinfo file for the hppa (parisc) platform.

Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200424210648.GA26715@ls3530.fritz.box>
[lv: s/an/our/ and add TARGET_HPPA to guard is_proc()]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20200605' into staging

s390x update:
- enhance s390x documentation
- allow ORBs without prefetch specified for vfio-ccw
- various cleanups and enhancements

# gpg: Signature made Fri 05 Jun 2020 16:32:43 BST
# gpg:                using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg:                issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [marginal]
# gpg:                 aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg:                 aka "Cornelia Huck <cohuck@kernel.org>" [marginal]
# gpg:                 aka "Cornelia Huck <cohuck@redhat.com>" [marginal]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20200605:
  target/s390x: Restrict system-mode declarations
  target/s390x/helper: Clean ifdef'ry
  target/s390x: Only compile decode_basedisp() on system-mode
  MAINTAINERS: add Thomas as additional s390x maintainer
  docs/s390x: document vfio-ccw
  vfio-ccw: allow non-prefetch ORBs
  docs/s390x: document 3270
  docs/s390x: document the virtual css
  s390x: pv: Fix KVM_PV_PREP_RESET command wrapper name
  s390x/kvm: help valgrind in several places

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert Neon one-register-and-immediate insns to decodetree

Convert the insns in the one-register-and-immediate group to decodetree.

In the new decode, our asimd_imm_const() function returns a 64-bit value
rather than a 32-bit one, which means we don't need to treat cmode=14 op=1
as a special case in the decoder (it is the only encoding where the two
halves of the 64-bit value are different).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-10-peter.maydell@linaro.org

target/arm: Convert VCVT fixed-point ops to decodetree

Convert the VCVT fixed-point conversion operations in the
Neon 2-regs-and-shift group to decodetree.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-9-peter.maydell@linaro.org

target/arm: Convert Neon VSHLL, VMOVL to decodetree

Convert the VSHLL and VMOVL insns from the 2-reg-shift group
to decodetree. Since the loop always has two passes, we unroll
it to avoid the awkward reassignment of one TCGv to another.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-8-peter.maydell@linaro.org

target/arm: Convert Neon narrowing shifts with op==9 to decodetree

Convert the remaining Neon narrowing shifts to decodetree:
  * VQSHRN
  * VQRSHRN

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-7-peter.maydell@linaro.org

target/arm: Convert Neon narrowing shifts with op==8 to decodetree

Convert the Neon narrowing shifts where op==8 to decodetree:
 * VSHRN
 * VRSHRN
 * VQSHRUN
 * VQRSHRUN

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-6-peter.maydell@linaro.org

target/arm: Convert VQSHLU, VQSHL 2-reg-shift insns to decodetree

Convert the VQSHLU and QVSHL 2-reg-shift insns to decodetree.
These are the last of the simple shift-by-immediate insns.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-5-peter.maydell@linaro.org

target/arm: Convert Neon VSRA, VSRI, VRSHR, VRSRA 2-reg-shift insns to decodetree

Convert the VSRA, VSRI, VRSHR, VRSRA 2-reg-shift insns to decodetree.
(These are the last instructions in the group that are vectorized;
the rest all require looping over each element.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-4-peter.maydell@linaro.org

target/arm: Convert Neon VSHR 2-reg-shift insns to decodetree

Convert the VSHR 2-reg-shift insns to decodetree.

Note that unlike the legacy decoder, we present the right shift
amount to the trans_ function as a positive integer.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-3-peter.maydell@linaro.org

target/arm: Convert Neon VSHL and VSLI 2-reg-shift insn to decodetree

Convert the VSHL and VSLI insns from the Neon 2-registers-and-a-shift
group to decodetree.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-2-peter.maydell@linaro.org

raspi2 acceptance test: add test for dwc-hsotg (dwc2) USB host

Add a check for functional dwc-hsotg (dwc2) USB host emulation to
the Raspi 2 acceptance test

Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Reviewed-by: Philippe Mathieu-Daude <f4bug@amsat.org>
Message-id: 20200520235349.21215-8-pauldzim@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

wire in the dwc-hsotg (dwc2) USB host controller emulation

Wire the dwc-hsotg (dwc2) emulation into Qemu

Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Reviewed-by: Philippe Mathieu-Daude <f4bug@amsat.org>
Message-id: 20200520235349.21215-7-pauldzim@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

usb: add short-packet handling to usb-storage driver

The dwc-hsotg (dwc2) USB host depends on a short packet to
indicate the end of an IN transfer. The usb-storage driver
currently doesn't provide this, so fix it.

I have tested this change rather extensively using a PC
emulation with xhci, ehci, and uhci controllers, and have
not observed any regressions.

Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Message-id: 20200520235349.21215-6-pauldzim@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

dwc-hsotg (dwc2) USB host controller emulation

Add the dwc-hsotg (dwc2) USB host controller emulation code.
Based on hw/usb/hcd-ehci.c and hw/usb/hcd-ohci.c.

Note that to use this with the dwc-otg driver in the Raspbian
kernel, you must pass the option "dwc_otg.fiq_fsm_enable=0" on
the kernel command line.

Emulation of slave mode and of descriptor-DMA mode has not been
implemented yet. These modes are seldom used.

I have used some on-line sources of information while developing
this emulation, including:

http://www.capital-micro.com/PDF/CME-M7_Family_User_Guide_EN.pdf
which has a pretty complete description of the controller starting
on page 370.

https://sourceforge.net/p/wive-ng/wive-ng-mt/ci/master/tree/docs/DataSheets/RT3050_5x_V2.0_081408_0902.pdf
which has a description of the controller registers starting on
page 130.

Thanks to Felippe Mathieu-Daude for providing a cleaner method
of implementing the memory regions for the controller registers.

Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Message-id: 20200520235349.21215-5-pauldzim@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

dwc-hsotg (dwc2) USB host controller state definitions

Add the dwc-hsotg (dwc2) USB host controller state definitions.
Mostly based on hw/usb/hcd-ehci.h.

Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Message-id: 20200520235349.21215-4-pauldzim@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

dwc-hsotg (dwc2) USB host controller register definitions

Import the dwc-hsotg (dwc2) register definitions file from the
Linux kernel. This is a copy of drivers/usb/dwc2/hw.h from the
mainline Linux kernel, the only changes being to the header, and
two instances of 'u32' changed to 'uint32_t' to allow it to
compile. Checkpatch throws a boatload of errors due to the tab
indentation, but I would rather import it as-is than reformat it.

Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Message-id: 20200520235349.21215-3-pauldzim@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

raspi: add BCM2835 SOC MPHI emulation

Add BCM2835 SOC MPHI (Message-based Parallel Host Interface)
emulation. It is very basic, only providing the FIQ interrupt
needed to allow the dwc-otg USB host controller driver in the
Raspbian kernel to function.

Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Acked-by: Philippe Mathieu-Daude <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200520235349.21215-2-pauldzim@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

docs/system: Document Aspeed boards

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200602135050.593692-1-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests/acceptance: Add a boot test for the xlnx-versal-virt machine

As described by Edgar here:

 https://www.mail-archive.com/qemu-devel@nongnu.org/msg605124.html

we can use the Ubuntu kernel for testing the xlnx-versal-virt machine.
So let's add a boot test for this now.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200525141237.15243-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/adc/stm32f2xx_adc: Correct memory region size and access size

The ADC region size is 256B, split as:
 - [0x00 - 0x4f] defined
 - [0x50 - 0xff] reserved

All registers are 32-bit (thus when the datasheet mentions the
last defined register is 0x4c, it means its address range is
0x4c .. 0x4f.

This model implementation is also 32-bit. Set MemoryRegionOps
'impl' fields.

See:
  'RM0033 Reference manual Rev 8', Table 10.13.18 "ADC register map".

Reported-by: Seth Kintigh <skintigh@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200603055915.17678-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Split helper_crypto_sm3tt

Rather than passing an opcode to a helper, fully decode the
operation at translate time.  Use clear_tail_16 to zap the
balance of the SVE register with the AdvSIMD write.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Split helper_crypto_sha1_3reg

Rather than passing an opcode to a helper, fully decode the
operation at translate time.  Use clear_tail_16 to zap the
balance of the SVE register with the AdvSIMD write.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert sha1 and sha256 to gvec helpers

Do not yet convert the helpers to loop over opr_sz, but the
descriptor allows the vector tail to be cleared.  Which fixes
an existing bug vs SVE.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert sha512 and sm3 to gvec helpers

Do not yet convert the helpers to loop over opr_sz, but the
descriptor allows the vector tail to be cleared.  Which fixes
an existing bug vs SVE.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert rax1 to gvec helpers

With this conversion, we will be able to use the same helpers
with sve.  This also fixes a bug in which we failed to clear
the high bits of the SVE register after an AdvSIMD operation.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert aes and sm4 to gvec helpers

With this conversion, we will be able to use the same helpers
with sve.  In particular, pass 3 vector parameters for the
3-operand operations; for advsimd the destination register
is also an input.

This also fixes a bug in which we failed to clear the high bits
of the SVE register after an AdvSIMD operation.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/pxa2xx: Replace printf() call by qemu_log_mask()

Replace printf() calls by qemu_log_mask(), which is disabled
by default. This avoid flooding the terminal when fuzzing the
device.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200525114123.21317-3-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/input/pxa2xx_keypad: Replace hw_error() by qemu_log_mask()

hw_error() calls exit(). This a bit overkill when we can log
the accesses as unimplemented or guest error.

When fuzzing the devices, we don't want the whole process to
exit. Replace some hw_error() calls by qemu_log_mask()
(missed in commit 5a0001ec7e).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200525114123.21317-2-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/ssi/imx_spi: Removed unnecessary cast of rx data received from slave

When inserting the value retrieved (rx) from the spi slave, rx is pushed to
rx_fifo after being cast to uint8_t. rx_fifo is a fifo32, and the rx
register the driver uses is also 32 bit. This zeroes the 24 most
significant bits of rx. This proved problematic with devices that expect to
use the whole 32 bits of the rx register.

Signed-off-by: Eden Mikitas <e.mikitas@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/ssi/imx_spi: changed while statement to prevent underflow

The while statement in question only checked if tx_burst is not 0.
tx_burst is a signed int, which is assigned the value put by the
guest driver in ECSPI_CONREG. The burst length can be anywhere
between 1 and 4096, and since tx_burst is always decremented by 8
it could possibly underflow, causing an infinite loop.

Signed-off-by: Eden Mikitas <e.mikitas@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/s390x: Restrict system-mode declarations

As these declarations are restricted to !CONFIG_USER_ONLY in
helper.c, only declare them when system-mode emulation is used.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200526172427.17460-8-f4bug@amsat.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

target/s390x/helper: Clean ifdef'ry

All this code is guarded checking CONFIG_USER_ONLY definition.
Drop the duplicated checks.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200526172427.17460-7-f4bug@amsat.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

target/s390x: Only compile decode_basedisp() on system-mode

The decode_basedisp*() methods are only used in ioinst.c,
which is only build in system-mode emulation.

I/O instructions are privileged, and other S instructions
are decoded elsewhere.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200526172427.17460-6-f4bug@amsat.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

MAINTAINERS: add Thomas as additional s390x maintainer

...because two people are better than one.

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Message-Id: <20200525155855.225564-1-cohuck@redhat.com>

docs/s390x: document vfio-ccw

Add a basic example for passing a dasd via vfio-ccw.

Message-Id: <20200518075522.97643-1-cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

vfio-ccw: allow non-prefetch ORBs

Remove the explicit prefetch check when using vfio-ccw devices.
This check does not trigger in practice as all Linux channel programs
are intended to use prefetch.

Newer Linux kernel versions do not require to force the PFCH flag with
vfio-ccw devices anymore.

Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20200512181535.18630-2-jrossi@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

docs/s390x: document 3270

Add some basic info how to use 3270 devices.

Message-Id: <20200515151518.83950-3-cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

docs/s390x: document the virtual css

Add some hints about "devno" rules.

Message-Id: <20200515151518.83950-2-cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

s390x: pv: Fix KVM_PV_PREP_RESET command wrapper name

s390_pv_perf_clear_reset() is not a very helpful name since that
function needs to be called for a normal and a clear reset via
diag308.

Let's instead name it s390_pv_prep_reset() which reflects the purpose
of the function a bit better.

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200505124159.24099-1-frankja@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

s390x/kvm: help valgrind in several places

We need some little help in the code to reduce the valgrind noise.
This patch does this with some designated initializers for the cpu
model features and subfunctions.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200429074201.100924-1-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20200605-pull-request' into staging

vga: ati security fix, cirrus cleanup.

# gpg: Signature made Fri 05 Jun 2020 12:27:13 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20200605-pull-request:
  hw/display/cirrus_vga: Fix code mis-indentation
  ati-vga: check mm_index before recursive call (CVE-2020-13800)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Pull request

# gpg: Signature made Fri 05 Jun 2020 10:47:27 BST
# gpg:                using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
  block: Factor out bdrv_run_co()
  exec: Rename qemu_ram_writeback() as qemu_ram_msync()
  hw/block: Let the NVMe emulated device be target-agnostic
  memory: Extract memory_region_msync() from memory_region_writeback()
  memory: Rename memory_region_do_writeback -> memory_region_writeback
  fuzz: run the main-loop in fork-server process
  fuzz: add mangled object name to linker script
  fuzz: fix typo in i440fx-qtest-reboot arguments
  fuzz: add datadir for oss-fuzz compatability
  io_uring: use io_uring_cq_ready() to check for ready cqes
  io_uring: retry io_uring_submit() if it fails with errno=EINTR

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

block: Factor out bdrv_run_co()

We have a few bdrv_*() functions that can either spawn a new coroutine
and wait for it with BDRV_POLL_WHILE() or use a fastpath if they are
alreeady running in a coroutine. All of them duplicate basically the
same code.

Factor the common code into a new function bdrv_run_co().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20200520144901.16589-1-vsementsov@virtuozzo.com
   [Factor out bdrv_run_co_entry too]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

exec: Rename qemu_ram_writeback() as qemu_ram_msync()

Rename qemu_ram_writeback() as qemu_ram_msync() to better
match what it does.

Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200508062456.23344-5-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

hw/block: Let the NVMe emulated device be target-agnostic

Now than the non-target specific memory_region_msync() function
is available, use it to make this device target-agnostic.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200508062456.23344-4-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

memory: Extract memory_region_msync() from memory_region_writeback()

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200508062456.23344-3-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

memory: Rename memory_region_do_writeback -> memory_region_writeback

We usually use '_do_' for internal functions. Rename
memory_region_do_writeback() as memory_region_writeback().

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200508062456.23344-2-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

fuzz: run the main-loop in fork-server process

Without this, the time since the last main-loop keeps increasing, as the
fuzzer runs. The forked children need to handle all the "past-due"
timers, slowing them down, over time. With this change, the
parent/fork-server process runs the main-loop, while waiting on the
child, ensuring that the timer events do not pile up, over time.

Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200512030133.29896-5-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

fuzz: add mangled object name to linker script

Previously, we relied on "FuzzerTracePC*(.bss*)" to place libfuzzer's
fuzzer::TPC object into our contiguous shared-memory region. This does
not work for some libfuzzer builds, so this addition identifies the
region by its mangled name: *(.bss._ZN6fuzzer3TPCE);

Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200512030133.29896-4-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

fuzz: fix typo in i440fx-qtest-reboot arguments

Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200512030133.29896-3-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

fuzz: add datadir for oss-fuzz compatability

This allows us to keep pc-bios in executable_dir/pc-bios, rather than
executable_dir/../pc-bios, which is incompatible with oss-fuzz' file
structure.

Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200512030133.29896-2-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

io_uring: use io_uring_cq_ready() to check for ready cqes

In qemu_luring_poll_cb() we are not using the cqe peeked from the
CQ ring. We are using io_uring_peek_cqe() only to see if there
are cqes ready, so we can replace it with io_uring_cq_ready().

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20200519134942.118178-1-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

io_uring: retry io_uring_submit() if it fails with errno=EINTR

As recently documented [1], io_uring_enter(2) syscall can return an
error (errno=EINTR) if the operation was interrupted by a delivery
of a signal before it could complete.

This should happen when IORING_ENTER_GETEVENTS flag is used, for
example during io_uring_submit_and_wait() or during io_uring_submit()
when IORING_SETUP_IOPOLL is enabled.

We shouldn't have this problem for now, but it's better to prevent it.

[1] https://github.com/axboe/liburing/commit/344355ec6619de8f4e64584c9736530b5346e4f4

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20200519133041.112138-1-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

hw/display/cirrus_vga: Fix code mis-indentation

While replacing fprintf() by qemu_log_mask() in commit
2b55f4d3504, we incorrectly used a 'tab = 4 spaces'
alignment, leading to misindented new code. Fix now.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200529165436.23573-1-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

ati-vga: check mm_index before recursive call (CVE-2020-13800)

While accessing VGA registers via ati_mm_read/write routines,
a guest may set 's->regs.mm_index' such that it leads to infinite
recursion. Check mm_index value to avoid such recursion. Log an
error message for wrong values.

Reported-by: Ren Ding <rding@gatech.edu>
Reported-by: Hanqing Zhao <hanqing@gatech.edu>
Reported-by: Yi Ren <c4tren@gmail.com>
Message-id: 20200604090830.33885-1-ppandit@redhat.com
Suggested-by: BALATON Zoltan <balaton@eik.bme.hu>
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20200603' into staging

This is a collection of RISC-V patches for 5.1.

This incldues removing deprecated features and part of the OpenTitan
support series.

# gpg: Signature made Wed 03 Jun 2020 17:12:43 BST
# gpg:                using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8  CE8F 21E1 0D29 DF97 7054

* remotes/alistair/tags/pull-riscv-to-apply-20200603:
  riscv: Initial commit of OpenTitan machine
  target/riscv: Add the lowRISC Ibex CPU
  target/riscv: Don't set PMP feature in the cpu init
  target/riscv: Disable the MMU correctly
  target/riscv: Don't overwrite the reset vector
  riscv/boot: Add a missing header include
  riscv: sifive_e: Manually define the machine
  docs: deprecated: Update the -bios documentation
  target/riscv: Drop support for ISA spec version 1.09.1
  target/riscv: Remove the deprecated CPUs
  hw/riscv: spike: Remove deprecated ISA specific machines
  hw/riscv: virt: Remove the riscv_ prefix of the machine* functions
  hw/riscv: sifive_u: Remove the riscv_ prefix of the soc* functions
  riscv: Change the default behavior if no -bios option is specified
  riscv: Suppress the error report for QEMU testing with riscv_find_firmware()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>