OSDN Git Service
Niklas Söderlund [Tue, 1 Aug 2017 10:14:37 +0000 (12:14 +0200)]
ravb: add workaround for clock when resuming with WoL enabled
The renesas-cpg-mssr clock driver are not yet aware of PSCI sleep where
power is cut to the SoC. When resuming from this state with WoL enabled
the enable count of the ravb clock is 1 and the clock driver thinks the
clock is already on when PM core enables the clock and increments the
enable count to 2. This will result in the ravb driver failing to talk
to the hardware since the module clock is off. Work around this by
forcing the enable count to 0 and then back to 2 when resuming with WoL
enabled.
This workaround should be reverted once the renesas-cpg-mssr clock
driver becomes aware of this PSCI sleep behavior.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Niklas Söderlund [Tue, 1 Aug 2017 10:14:36 +0000 (12:14 +0200)]
ravb: add wake-on-lan support via magic packet
WoL is enabled in the suspend callback by setting MagicPacket detection
and disabling all interrupts expect MagicPacket. In the resume path the
driver needs to reset the hardware to rearm the WoL logic, this prevents
the driver from simply restoring the registers and to take advantage of
that ravb was not suspended to reduce resume time. To reset the
hardware the driver closes the device, sets it in reset mode and reopens
the device just like it would do in a normal suspend/resume scenario
without WoL enabled, but it both closes and opens the device in the
resume callback since the device needs to be reset for WoL to work.
One quirk needed for WoL is that the module clock needs to be prevented
from being switched off by Runtime PM. To keep the clock alive the
suspend callback need to call clk_enable() directly to increase the
usage count of the clock. Then when Runtime PM decreases the clock usage
count it won't reach 0 and be switched off.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 2 Aug 2017 00:42:58 +0000 (17:42 -0700)]
Merge branch 'for-upstream' of git://git./linux/kernel/git/bluetooth/bluetooth-next
Johan Hedberg says:
====================
pull request: bluetooth-next 2017-08-01
Here's our first batch of Bluetooth patches for the 4.14 kernel:
- Several new USB IDs for the btusb driver
- Memory leak fix in btusb driver
- Cleanups & fixes to hci_nokia, hci_serdev and hci_bcm drivers
- Fixed cleanup path in mrf24j40 (802.15.4) driver probe function
- A few other smaller cleanups & fixes to drivers
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Mon, 31 Jul 2017 12:15:47 +0000 (08:15 -0400)]
net: add skb_frag_foreach_page and use with kmap_atomic
Skb frags may contain compound pages. Various operations map frags
temporarily using kmap_atomic, but this function works on single
pages, not whole compound pages. The distinction is only relevant
for high mem pages that require temporary mappings.
Introduce a looping mechanism that for compound highmem pages maps
one page at a time, does not change behavior on other pages.
Use the loop in the kmap_atomic callers in net/core/skbuff.c.
Verified by triggering skb_copy_bits with
tcpdump -n -c 100 -i ${DEV} -w /dev/null &
netperf -t TCP_STREAM -H ${HOST}
and by triggering __skb_checksum with
ethtool -K ${DEV} tx off
repeated the tests with looping on a non-highmem platform
(x86_64) by making skb_frag_must_loop always return true.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 1 Aug 2017 22:51:49 +0000 (15:51 -0700)]
Merge branch 'mediatek-next'
Sean Wang says:
====================
net-next: mediatek: add support for ethernet on MT7622 SoC
Changes since v2:
- update John's mail
Changes since v1:
- add refinement for ethernet clock management
- take out the code block for ESW, add it until ESW driver is actually introduced
The series adds the driver for ethernet controller found on MT7622 SoC.
There are additions against with previous MT7623 SoC such as shared SGMII
given for the dual GMACs and built-in 5-ports 10/100 embedded switch support
(ESW). Thus more clocks consumers and SGMII hardware setup for the extra
features are all introduced here and as for the support for ESW that would be
planned to add in the separate patch integrating with DSA infrastructure
in the future.
Currently testing successfully is done with those patches for the conditions
such as GMAC2 with IP1001 PHY via RGMII and GMAC1/2 with RTL8211F PHY via SGMII.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Mon, 31 Jul 2017 10:05:11 +0000 (18:05 +0800)]
MAINTAINERS: add Sean/Nelson as MediaTek ethernet maintainers
Sean and Nelson work for MediaTek on maintaining the MediaTek ethernet
driver for the existing SoCs and adding support for the following SoCs.
In the past, Sean has been active at making most of the qualifications
, stress test and submitting a lot of patches for the driver while
Nelson was looking into the aspects more on hardware additions and details
such as introducing PDMA with Hardware LRO to the driver. Also update
John's up-to-date mail address in the patch.
Cc: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Nelson Chang <nelson.chang@mediatek.com>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Mon, 31 Jul 2017 10:05:10 +0000 (18:05 +0800)]
net-next: mediatek: add support for MediaTek MT7622 SoC
This patch adds the driver for ethernet controller on MT7622 SoC. It has
the similar handling logic as the previously MT7623 does, but there are
additions against with MT7623 SoC, the shared SGMII given for the dual
GMACs and including 5-ports 10/100 embedded switch support (ESW) as the
GMAC1 option, thus more clocks consumers for the extra feature are
introduced here. So for ease portability and maintenance, those
differences all are being kept inside the platform data as other drivers
usually do. Currently testing successfully is done with those patches for
the conditions such as GMAC2 with IP1001 PHY via RGMII and GMAC1/2 with
RTL8211F PHY via SGMII.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Mon, 31 Jul 2017 10:05:09 +0000 (18:05 +0800)]
net-next: mediatek: add platform data to adapt into various hardware
This patch is the preparation patch in order to adapt into various
hardware through adding platform data which holds specific characteristics
among MediaTek SoCs and introducing the unified clock handler for those
distinct clock requirements depending on different features such as
TRGMII and SGMII getting support on the target SoC. And finally, add
enhancement with given the generic description for Kconfig and remove the
unnecessary machine type dependency in Makefile.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Mon, 31 Jul 2017 10:05:08 +0000 (18:05 +0800)]
dt-bindings: net: mediatek: add support for MediaTek MT7623 and MT7622 SoC
The patch adds the supplements in the dt-binding document for MediaTek
MT7622 SoC with extra SGMII system controller and relevant clock consumers
listed as the requirements for those SoCs equipped with the SGMII circuit.
Also, add the missing binding information for MT7623 SoC here which relies
on the fallback binding of MT2701.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 1 Aug 2017 22:26:19 +0000 (15:26 -0700)]
Merge branch 'kzproxy-next'
Tom Herbert says:
====================
net: Infrastructure changes for [kz]proxy
This patch set contains some general infrastructure enhancements that
will be used by kernel proxy and zero proxy.
The changes are:
- proto_ops: Add locked versions of sendmsg and sendpage
- skb_send_sock: Allow sending and skb on a socket within the
kernel
- Generalize strparser. Allow it to be used in other contexts than
just in the read_sock path. This will be used in the transmit
path of zero proxy.
Some nice future work (which I've been discussing with John Fastabend)
will be to make some of the related functions to allow gifting of skbs
We should be able to do that with skb_send_sock and strp_process. I'd
also like this feature in the read_sock callbeck.
Tested: Ran modified kernel without incident. Tested new functionality
using zero proxy (in development).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Fri, 28 Jul 2017 23:22:43 +0000 (16:22 -0700)]
strparser: Generalize strparser
Generalize strparser from more than just being used in conjunction
with read_sock. strparser will also be used in the send path with
zero proxy. The primary change is to create strp_process function
that performs the critical processing on skbs. The documentation
is also updated to reflect the new uses.
Signed-off-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Fri, 28 Jul 2017 23:22:42 +0000 (16:22 -0700)]
skbuff: Function to send an skbuf on a socket
Add skb_send_sock to send an skbuff on a socket within the kernel.
Arguments include an offset so that an skbuf might be sent in mulitple
calls (e.g. send buffer limit is hit).
Signed-off-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Fri, 28 Jul 2017 23:22:41 +0000 (16:22 -0700)]
proto_ops: Add locked held versions of sendmsg and sendpage
Add new proto_ops sendmsg_locked and sendpage_locked that can be
called when the socket lock is already held. Correspondingly, add
kernel_sendmsg_locked and kernel_sendpage_locked as front end
functions.
These functions will be used in zero proxy so that we can take
the socket lock in a ULP sendmsg/sendpage and then directly call the
backend transport proto_ops functions.
Signed-off-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 1 Aug 2017 17:07:50 +0000 (10:07 -0700)]
Merge git://git./linux/kernel/git/davem/net
Two minor conflicts in virtio_net driver (bug fix overlapping addition
of a helper) and MAINTAINERS (new driver edit overlapping revamp of
PHY entry).
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 1 Aug 2017 17:03:17 +0000 (10:03 -0700)]
Merge branch 'revert-ipv6-const'
Julia Lawall says:
====================
Revert "ipv6: constify inet6_protocol structures"
inet6_add_protocol and inet6_del_protocol include casts that remove the
effect of the const annotation on their parameter, leading to possible
runtime crashes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Tue, 1 Aug 2017 16:27:29 +0000 (18:27 +0200)]
Revert "l2tp: constify inet6_protocol structures"
This reverts commit
d04916a48ad4a3db892b664fa9c3a2a693c378ad.
inet6_add_protocol and inet6_del_protocol include casts that remove the
effect of the const annotation on their parameter, leading to possible
runtime crashes.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Tue, 1 Aug 2017 16:27:28 +0000 (18:27 +0200)]
Revert "ipv6: constify inet6_protocol structures"
This reverts commit
3a3a4e3054137c5ff5d4d306ec834f6d25d7f95b.
inet6_add_protocol and inet6_del_protocol include casts that remove the
effect of the const annotation on their parameter, leading to possible
runtime crashes.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 1 Aug 2017 05:36:42 +0000 (22:36 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Handle notifier registry failures properly in tun/tap driver, from
Tonghao Zhang.
2) Fix bpf verifier handling of subtraction bounds and add a testcase
for this, from Edward Cree.
3) Increase reset timeout in ftgmac100 driver, from Ben Herrenschmidt.
4) Fix use after free in prd_retire_rx_blk_timer_exired() in AF_PACKET,
from Cong Wang.
5) Fix SElinux regression due to recent UDP optimizations, from Paolo
Abeni.
6) We accidently increment IPSTATS_MIB_FRAGFAILS in the ipv6 code
paths, fix from Stefano Brivio.
7) Fix some mem leaks in dccp, from Xin Long.
8) Adjust MDIO_BUS kconfig deps to avoid build errors, from Arnd
Bergmann.
9) Mac address length check and buffer size fixes from Cong Wang.
10) Don't leak sockets in ipv6 udp early demux, from Paolo Abeni.
11) Fix return value when copy_from_user() fails in
bpf_prog_get_info_by_fd(), from Daniel Borkmann.
12) Handle PHY_HALTED properly in phy library state machine, from
Florian Fainelli.
13) Fix OOPS in fib_sync_down_dev(), from Ido Schimmel.
14) Fix truesize calculation in virtio_net which led to performance
regressions, from Michael S Tsirkin.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
samples/bpf: fix bpf tunnel cleanup
udp6: fix jumbogram reception
ppp: Fix a scheduling-while-atomic bug in del_chan
Revert "net: bcmgenet: Remove init parameter from bcmgenet_mii_config"
virtio_net: fix truesize for mergeable buffers
mv643xx_eth: fix of_irq_to_resource() error check
MAINTAINERS: Add more files to the PHY LIBRARY section
ipv4: fib: Fix NULL pointer deref during fib_sync_down_dev()
net: phy: Correctly process PHY_HALTED in phy_stop_machine()
sunhme: fix up GREG_STAT and GREG_IMASK register offsets
bpf: fix bpf_prog_get_info_by_fd to dump correct xlated_prog_len
tcp: avoid bogus gcc-7 array-bounds warning
net: tc35815: fix spelling mistake: "Intterrupt" -> "Interrupt"
bpf: don't indicate success when copy_from_user fails
udp6: fix socket leak on early demux
net: thunderx: Fix BGX transmit stall due to underflow
Revert "vhost: cache used event for better performance"
team: use a larger struct for mac address
net: check dev->addr_len for dev_set_mac_address()
phy: bcm-ns-usb3: fix MDIO_BUS dependency
...
Brian Norris [Tue, 1 Aug 2017 00:59:39 +0000 (17:59 -0700)]
Bluetooth: btusb: add ID for LiteOn 04ca:3016
Contains a QCA6174A-5 chipset, with USB BT. Let's support loading
firmware on it.
From usb-devices:
T: Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04ca ProdID=3016 Rev=00.01
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
William Tu [Mon, 31 Jul 2017 21:40:50 +0000 (14:40 -0700)]
samples/bpf: fix bpf tunnel cleanup
test_tunnel_bpf.sh fails to remove the vxlan11 tunnel device, causing the
next geneve tunnelling test case fails. In addition, the geneve reserved bit
in tcbpf2_kern.c should be zero, according to the RFC.
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Mon, 31 Jul 2017 14:52:36 +0000 (16:52 +0200)]
udp6: fix jumbogram reception
Since commit
67a51780aebb ("ipv6: udp: leverage scratch area
helpers") udp6_recvmsg() read the skb len from the scratch area,
to avoid a cache miss.
But the UDP6 rx path support RFC 2675 UDPv6 jumbograms, and their
length exceeds the 16 bits available in the scratch area. As a side
effect the length returned by recvmsg() is:
<ingress datagram len> % (1<<16)
This commit addresses the issue allocating one more bit in the
IP6CB flags field and setting it for incoming jumbograms.
Such field is still in the first cacheline, so at recvmsg()
time we can check it and fallback to access skb->len if
required, without a measurable overhead.
Fixes:
67a51780aebb ("ipv6: udp: leverage scratch area helpers")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gao Feng [Mon, 31 Jul 2017 10:07:38 +0000 (18:07 +0800)]
ppp: Fix a scheduling-while-atomic bug in del_chan
The PPTP set the pptp_sock_destruct as the sock's sk_destruct, it would
trigger this bug when __sk_free is invoked in atomic context, because of
the call path pptp_sock_destruct->del_chan->synchronize_rcu.
Now move the synchronize_rcu to pptp_release from del_chan. This is the
only one case which would free the sock and need the synchronize_rcu.
The following is the panic I met with kernel 3.3.8, but this issue should
exist in current kernel too according to the codes.
BUG: scheduling while atomic
__schedule_bug+0x5e/0x64
__schedule+0x55/0x580
? ppp_unregister_channel+0x1cd5/0x1de0 [ppp_generic]
? dev_hard_start_xmit+0x423/0x530
? sch_direct_xmit+0x73/0x170
__cond_resched+0x16/0x30
_cond_resched+0x22/0x30
wait_for_common+0x18/0x110
? call_rcu_bh+0x10/0x10
wait_for_completion+0x12/0x20
wait_rcu_gp+0x34/0x40
? wait_rcu_gp+0x40/0x40
synchronize_sched+0x1e/0x20
0xf8417298
0xf8417484
? sock_queue_rcv_skb+0x109/0x130
__sk_free+0x16/0x110
? udp_queue_rcv_skb+0x1f2/0x290
sk_free+0x16/0x20
__udp4_lib_rcv+0x3b8/0x650
Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Mon, 31 Jul 2017 18:05:32 +0000 (11:05 -0700)]
Revert "net: bcmgenet: Remove init parameter from bcmgenet_mii_config"
This reverts commit
28b45910ccda ("net: bcmgenet: Remove init parameter
from bcmgenet_mii_config") because in the process of moving from
dev_info() to dev_info_once() we essentially lost the helpful printed
messages once the second instance of the driver is loaded.
dev_info_once() does not actually print the message once per device
instance, but once period.
Fixes:
28b45910ccda ("net: bcmgenet: Remove init parameter from bcmgenet_mii_config")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael S. Tsirkin [Mon, 31 Jul 2017 18:49:49 +0000 (21:49 +0300)]
virtio_net: fix truesize for mergeable buffers
Seth Forshee noticed a performance degradation with some workloads.
This turns out to be due to packet drops. Euan Kemp noticed that this
is because we drop all packets where length exceeds the truesize, but
for some packets we add in extra memory without updating the truesize.
This in turn was kept around unchanged from
ab7db91705e95 ("virtio-net:
auto-tune mergeable rx buffer size for improved performance"). That
commit had an internal reason not to account for the extra space: not
enough bits to do it. No longer true so let's account for the allocated
length exactly.
Many thanks to Seth Forshee for the report and bisecting and Euan Kemp
for debugging the issue.
Fixes:
680557cf79f8 ("virtio_net: rework mergeable buffer handling")
Reported-by: Euan Kemp <euan.kemp@coreos.com>
Tested-by: Euan Kemp <euan.kemp@coreos.com>
Reported-by: Seth Forshee <seth.forshee@canonical.com>
Tested-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Sitnicki [Mon, 31 Jul 2017 08:09:41 +0000 (10:09 +0200)]
ipv6: Avoid going through ->sk_net to access the netns
There is no need to go through sk->sk_net to access the net namespace
and its sysctl variables because we allocate the sock and initialize
sk_net just a few lines earlier in the same routine.
Signed-off-by: Jakub Sitnicki <jkbs@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 1 Aug 2017 01:00:24 +0000 (18:00 -0700)]
Merge branch 'marvell-phy-refactor-and-cleanup'
Andrew Lunn says:
====================
More Marvell PHY refactoring and cleanup
Consolidate more duplicated code into helpers, make use of core
helpers, move code into a helper for later adding functionality to add
marvell PHYs, etc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 30 Jul 2017 20:41:50 +0000 (22:41 +0200)]
net: phy: marvell: Refactor setting downshift into a helper
The 1116r has code to set downshift. Refactor this into a helper, so
in future other marvell PHYs can use it.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 30 Jul 2017 20:41:49 +0000 (22:41 +0200)]
net: phy: marvell: Use the set_polarity helper
Some of the init functions unilaterally enable set auto cross over
without using the helper. Make use of the helper, and respect the
phydev MDI configuration.
Clean up the #define used while setting polarity, and the other
functions of the bits in the register.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 30 Jul 2017 20:41:48 +0000 (22:41 +0200)]
net: phy: marvell: Refactor m88e1121 RGMII delay configuration
Turns out that MII_M1116R_CONTROL_REG_MAC is the same as
MII_88E1121_PHY_MSCR_REG. Refactor the code to set the RGMII delays
into a shared helper.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 30 Jul 2017 20:41:47 +0000 (22:41 +0200)]
net: phy: marvell: Consolidate setting the phy-mode
The same code is repeated a few times. Refactor into a helped.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 30 Jul 2017 20:41:46 +0000 (22:41 +0200)]
net: phy: marvell: consolidate RGMII delay code
The same code is repeated for different PHY versions. Put it into a
help and call when needed.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 30 Jul 2017 20:41:45 +0000 (22:41 +0200)]
net: phy: marvell: Use core genphy_soft_reset()
Rather than using an open coded equivalent, use the core
genphy_soft_reset() function.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 30 Jul 2017 20:41:44 +0000 (22:41 +0200)]
net: phy: marvell: tabification
Convert spaces to tabs where appropriate, and fix up some otherwise
odd indentation.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sergei Shtylyov [Sat, 29 Jul 2017 19:18:41 +0000 (22:18 +0300)]
mv643xx_eth: fix of_irq_to_resource() error check
of_irq_to_resource() has recently been fixed to return negative error #'s
along with 0 in case of failure, however the Marvell MV643xx Ethernet
driver still only regards 0 as invalid IRQ -- fix it up.
Fixes:
7a4228bbff76 ("of: irq: use of_irq_get() in of_irq_to_resource()")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Tue, 1 Aug 2017 00:53:07 +0000 (17:53 -0700)]
net: bcmgenet: Add dependency on HAS_IOMEM && OF
The driver needs CONFIG_HAS_IOMEM and OF to be functional, but we still
let it build with COMPILE_TEST. This fixes the unmet dependency after
selecting MDIO_BCM_UNIMAC in commit mentioned below:
warning: (NET_DSA_BCM_SF2 && BCMGENET) selects MDIO_BCM_UNIMAC which has
unmet direct dependencies (NETDEVICES && MDIO_DEVICE && HAS_IOMEM &&
OF_MDIO)
Fixes:
9a4e79697009 ("net: bcmgenet: utilize generic Broadcom UniMAC MDIO controller driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Mon, 31 Jul 2017 16:47:50 +0000 (09:47 -0700)]
MAINTAINERS: Add more files to the PHY LIBRARY section
Include missing files that are provided by, used, or directly maintained
within the PHY LIBRARY, this include uapi header, header files used by
Device Tree code etc.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Fri, 28 Jul 2017 20:27:44 +0000 (23:27 +0300)]
ipv4: fib: Fix NULL pointer deref during fib_sync_down_dev()
Michał reported a NULL pointer deref during fib_sync_down_dev() when
unregistering a netdevice. The problem is that we don't check for
'in_dev' being NULL, which can happen in very specific cases.
Usually routes are flushed upon NETDEV_DOWN sent in either the netdev or
the inetaddr notification chains. However, if an interface isn't
configured with any IP address, then it's possible for host routes to be
flushed following NETDEV_UNREGISTER, after NULLing dev->ip_ptr in
inetdev_destroy().
To reproduce:
$ ip link add type dummy
$ ip route add local 1.1.1.0/24 dev dummy0
$ ip link del dev dummy0
Fix this by checking for the presence of 'in_dev' before referencing it.
Fixes:
982acb97560c ("ipv4: fib: Notify about nexthop status changes")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Fri, 28 Jul 2017 18:58:36 +0000 (11:58 -0700)]
net: phy: Correctly process PHY_HALTED in phy_stop_machine()
Marc reported that he was not getting the PHY library adjust_link()
callback function to run when calling phy_stop() + phy_disconnect()
which does not indeed happen because we set the state machine to
PHY_HALTED but we don't get to run it to process this state past that
point.
Fix this with a synchronous call to phy_state_machine() in order to have
the state machine actually act on PHY_HALTED, set the PHY device's link
down, turn the network device's carrier off and finally call the
adjust_link() function.
Reported-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Fixes:
a390d1f379cf ("phylib: convert state_queue work to delayed_work")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Wang [Fri, 28 Jul 2017 17:28:21 +0000 (10:28 -0700)]
tcp: add related fields into SCM_TIMESTAMPING_OPT_STATS
Add the following stats into SCM_TIMESTAMPING_OPT_STATS control msg:
TCP_NLA_PACING_RATE
TCP_NLA_DELIVERY_RATE
TCP_NLA_SND_CWND
TCP_NLA_REORDERING
TCP_NLA_MIN_RTT
TCP_NLA_RECUR_RETRANS
TCP_NLA_DELIVERY_RATE_APP_LMT
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Wang [Fri, 28 Jul 2017 17:28:20 +0000 (10:28 -0700)]
tcp: extract the function to compute delivery rate
Refactor the code to extract the function to compute delivery rate.
This function will be used in later commit.
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mark Cave-Ayland [Thu, 27 Jul 2017 16:26:00 +0000 (17:26 +0100)]
sunhme: fix up GREG_STAT and GREG_IMASK register offsets
Update the values to match those from the STP2002QFP documentation.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marc Gonzalez [Fri, 28 Jul 2017 11:18:30 +0000 (13:18 +0200)]
net: phy: Log only PHY state transitions
In the current code, old and new PHY states are always logged.
>From now on, log only PHY state transitions.
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 31 Jul 2017 21:44:34 +0000 (14:44 -0700)]
Merge branch 'mlxsw-Various-small-fixes'
Jiri Pirko says:
====================
mlxsw: Various small fixes
This patch series is to contribute several fixes for nits that I noticed while
working on mlxsw. The changes range from typo fixes to local improvements of
the code and have little in common besides being small in scope.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Mon, 31 Jul 2017 07:27:30 +0000 (09:27 +0200)]
mlxsw: spectrum_router: Simplify a piece of code
Express the same logic more succinctly.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Mon, 31 Jul 2017 07:27:29 +0000 (09:27 +0200)]
mlxsw: spectrum_router: Clarify a piece of code
Prefer logical operator that expresses the intent to bitwise one that
happens to give the same result.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Mon, 31 Jul 2017 07:27:28 +0000 (09:27 +0200)]
mlxsw: spectrum_router: Simplify a piece of code
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Mon, 31 Jul 2017 07:27:27 +0000 (09:27 +0200)]
mlxsw: reg.h: Namespace IP2ME registers
This renames IP2ME-specific registers reg_ralue_v and
reg_ralue_tunnel_ptr to reg_ralue_ip2me_*.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Mon, 31 Jul 2017 07:27:26 +0000 (09:27 +0200)]
mlxsw: Update specification of reg_ritr_type
The comments really belong to the individual enumerators. The comment
at the register should instead reference the enum.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Mon, 31 Jul 2017 07:27:25 +0000 (09:27 +0200)]
mlxsw: spectrum_router: Fix a typo
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Mon, 31 Jul 2017 07:27:24 +0000 (09:27 +0200)]
mlxsw: reg.h: Fix a typo
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Mon, 31 Jul 2017 07:27:23 +0000 (09:27 +0200)]
mlxsw: spectrum_acl: Fix a typo
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 31 Jul 2017 21:40:59 +0000 (14:40 -0700)]
Merge branch 'bcmgenet-utilize-MDIO-unimac-driver'
Florian Fainelli says:
====================
net: bcmgenet: utilize MDIO unimac driver
This patch series migrates the Broadcom GENET driver to use the mdio-bcm-unimac
driver. This MDIO HW is the same as the one GENET internally embedds, yet for
historical reasons the two drivers lived their own lives. Because of the GENET
interrupt situation, we let it specify how it wants to signal MDIO operations
completion using its driver-private waitqueue.
The diffstat is not super impressive, but it's still negative! This would
make it easier in the future to absorb possible workarounds/bugs/features
within the same location.
This was tested on BCM7260 (GENETv5, single instance), BCM7439 (GENETv4, triple
instance) and BCM7445 (bcm_sf2 + mdio-bcm-unimac).
We also now have a nice /proc/iomem output:
f0b00000-
f0b0fc4b : /rdb/ethernet@
f0b00000
f0b00e14-
f0b00e1c : unimac-mdio.0
f0b20000-
f0b2fc4b : /rdb/ethernet@
f0b20000
f0b20e14-
f0b20e1c : unimac-mdio.1
f0b40000-
f0b4fc4b : /rdb/ethernet@
f0b40000
f0b40e14-
f0b40e1c : unimac-mdio.2
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Mon, 31 Jul 2017 19:04:28 +0000 (12:04 -0700)]
net: bcmgenet: Utilize bcmgenet_mii_exit() for error path
bcmgenet_mii_init() has an error path which is strictly identical to the
unwinding that bcmgenet_mii_exit() does, so have bcmgenet_mii_init()
utilize bcmgenet_mii_exit() for that.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Mon, 31 Jul 2017 19:04:27 +0000 (12:04 -0700)]
net: bcmgenet: Drop legacy MDIO code
Now that we have fully migrated to the mdio-bcm-unimac driver, drop the
legacy MDIO bus code which did duplicate a fair amount of code.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Mon, 31 Jul 2017 19:04:26 +0000 (12:04 -0700)]
net: bcmgenet: utilize generic Broadcom UniMAC MDIO controller driver
Update the GENET driver to register an UniMAC MDIO bus controller for
the GENET internal MDIO bus, update the platform data code to attach the
PHY to the correct MDIO bus controller.
The Device Tree portion of the code is mostly left unmodified since the
lookup/binding is done via phandles and Device Tree nodes which are much
more flexible in locating and binding PHYs to their respective MDIO bus
controllers.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Mon, 31 Jul 2017 19:04:25 +0000 (12:04 -0700)]
net: phy: mdio-bcm-unimac: Allow specifying platform data
In preparation for having the bcmgenet driver migrate over the
mdio-bcm-unimac driver, add a platform data structure which allows
passing integrating specific details like bus name, wait function to
complete MDIO operations and PHY mask.
We also define what the platform device name contract is by defining
UNIMAC_MDIO_DRV_NAME and moving it to the platform_data header.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Mon, 31 Jul 2017 19:04:24 +0000 (12:04 -0700)]
net: phy: mdio-bcm-unimac: Add debug print for PHY workaround
In order to be stricly identical to what bcmgenet does, add a debug
print when a PHY workaround during bus->reset() is executed. Preliminary
change to moving bcmgenet towards mdio-bcm-unimac.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Mon, 31 Jul 2017 19:04:23 +0000 (12:04 -0700)]
net: phy: mdio-bcm-unimac: create unique bus names
In preparation for having multiple GENET instances in a system (up to
3), make sure that we do include the bus instance number in the name of
the MDIO bus such that we change it from "unimac-mdio" to
"unimac-mdio-0" for instance.
So far, the only user of this driver is using Device Tree, which uses a
lookup/parenting based technique to map PHY devices to their respective
MDIO bus controllers, hence causing no additional changes.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Mon, 31 Jul 2017 19:04:22 +0000 (12:04 -0700)]
net: phy: mdio-bcm-unimac: factor busy polling loop
Factor the code that does the busy polling on the MDIO_BUSY bit since we
will have different code-paths for for completion depending on whether
we are using interrupts or polling.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 31 Jul 2017 21:37:50 +0000 (14:37 -0700)]
Merge branch 'tcp-remove-prequeue-and-header-prediction'
Florian Westphal says:
====================
tcp: remove prequeue and header prediction
During a hallway discussion with Eric Dumazet at Netdev 1.2 in
Tokyo some maybe-not-so-useful-anymore TCP stack features came up,
among these header prediction and prequeueing.
In brief, TCP prequeue assumes a single-process-blocking-read design,
which is not that common anymore. The most frequently used high-performance
networking program that is an excellent fit for these features is netperf.
The idea behind prequeueing is to move part of tcp processing, including
retransmit queue cleaning, to process context.
With (e)poll designs, prequeue is always skipped, so for such programs
this is dead-code removal.
Header prediction is also less useful nowadays.
For packet trains, GRO will do packet aggregation so we do not get the
per-packet benefit that this had before GRO anymore.
Because of SACK, header prediction also will be ineffective once
a connection suffers even light packet losses.
code removal aside, after this change processing always occurs in BH
context, this allows to experiment e.g. with doing bulk freeing of
skb heads when incoming ACKs clean packets from the retransmit queue.
There are no changes since the RFC, except in last patch (i missed
another no-longer-used mib counter). I also edited a few commit messages.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Sun, 30 Jul 2017 01:57:23 +0000 (03:57 +0200)]
tcp: remove unused mib counters
was used by tcp prequeue and header prediction.
TCPFORWARDRETRANS use was removed in january.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Sun, 30 Jul 2017 01:57:22 +0000 (03:57 +0200)]
tcp: remove CA_ACK_SLOWPATH
re-indent tcp_ack, and remove CA_ACK_SLOWPATH; it is always set now.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Sun, 30 Jul 2017 01:57:21 +0000 (03:57 +0200)]
tcp: remove header prediction
Like prequeue, I am not sure this is overly useful nowadays.
If we receive a train of packets, GRO will aggregate them if the
headers are the same (HP predates GRO by several years) so we don't
get a per-packet benefit, only a per-aggregated-packet one.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Sun, 30 Jul 2017 01:57:20 +0000 (03:57 +0200)]
tcp: remove low_latency sysctl
Was only checked by the removed prequeue code.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Sun, 30 Jul 2017 01:57:19 +0000 (03:57 +0200)]
tcp: reindent two spots after prequeue removal
These two branches are now always true, remove the conditional.
objdiff shows no changes.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Sun, 30 Jul 2017 01:57:18 +0000 (03:57 +0200)]
tcp: remove prequeue support
prequeue is a tcp receive optimization that moves part of rx processing
from bh to process context.
This only works if the socket being processed belongs to a process that
is blocked in recv on that socket.
In practice, this doesn't happen anymore that often because nowadays
servers tend to use an event driven (epoll) model.
Even normal client applications (web browsers) commonly use many tcp
connections in parallel.
This has measureable impact only in netperf (which uses plain recv and
thus allows prequeue use) from host to locally running vm (~4%), however,
there were no changes when using netperf between two physical hosts with
ixgbe interfaces.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 31 Jul 2017 21:03:05 +0000 (14:03 -0700)]
Merge branch 'for-4.13-fixes' of git://git./linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"Several cgroup bug fixes.
- cgroup core was calling a migration callback on empty migrations,
which could make cpuset crash.
- There was a very subtle bug where the controller interface files
aren't created directly when cgroup2 is mounted. Because later
operations create them, this bug didn't get noticed earlier.
- Failed writes to cgroup.subtree_control were incorrectly returning
zero"
* 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: fix error return value from cgroup_subtree_control()
cgroup: create dfl_root files on subsys registration
cgroup: don't call migration methods if there are no tasks to migrate
Linus Torvalds [Mon, 31 Jul 2017 20:37:28 +0000 (13:37 -0700)]
Merge branch 'for-4.13-fixes' of git://git./linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
"Two notable fixes.
- While adding NUMA affinity support to unbound workqueues, the
assumption that an unbound workqueue with max_active == 1 is
ordered was broken.
The plan was to use explicit alloc_ordered_workqueue() for those
cases. Unfortunately, I forgot to update the documentation properly
and we grew a handful of use cases which depend on that assumption.
While we want to convert them to alloc_ordered_workqueue(), we
don't really lose anything by enforcing ordered execution on
unbound max_active == 1 workqueues and it doesn't make sense to
risk subtle bugs. Restore the assumption.
- Workqueue assumes that CPU <-> NUMA node mapping remains static.
This is a general assumption - we don't have any synchronization
mechanism around CPU <-> node mapping. Unfortunately, powerpc may
change the mapping dynamically leading to crashes. Michael added a
workaround so that we at least don't crash while powerpc hotplug
code gets updated"
* 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Work around edge cases for calc of pool's cpumask
workqueue: implicit ordered attribute should be overridable
workqueue: restore WQ_UNBOUND/max_active==1 to be ordered
Linus Torvalds [Mon, 31 Jul 2017 20:33:21 +0000 (13:33 -0700)]
Merge branch 'for-4.13-fixes' of git://git./linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
"Dan found a really old bug where libata hotplug code wasn't sanitizing
index value from userland and may end up indexing with a negative
number. It is scary but fortunately can only be triggered by root.
Other than that, minor fixes"
* 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
libata: fix a couple of doc build warnings
libata: array underflow in ata_find_dev()
ata: sata_rcar: add gen[23] fallback compatibility strings
libata: remove unused rc in ata_eh_handle_port_resume
libata: Cleanup ata_read_log_page()
ata: fix gemini Kconfig dependencies
Jonathan Corbet [Sun, 30 Jul 2017 22:16:04 +0000 (16:16 -0600)]
libata: fix a couple of doc build warnings
The kerneldoc comments for a couple of functions in drivers/ata/libata-eh.c
had fallen behind the current implementation, resulting in these doc build
warnings:
./drivers/ata/libata-eh.c:1449: warning: No description found for parameter 'link'
./drivers/ata/libata-eh.c:1449: warning: Excess function parameter 'ap' description in 'ata_eh_done'
./drivers/ata/libata-eh.c:1590: warning: No description found for parameter 'qc'
./drivers/ata/libata-eh.c:1590: warning: Excess function parameter 'dev' description in 'ata_eh_request_sense'
Update the comments and make the warnings go away.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
Loic Poulain [Sat, 29 Jul 2017 17:32:31 +0000 (19:32 +0200)]
Bluetooth: hci_uart: Fix uninitialized alignment value
Force alignment value to the default one (1 byte) if uninitialized.
This fixes hci_ll serdev driver (alignment = 0) and avoid any further
issues with upcoming drivers.
Signed-off-by: Loic Poulain <loic.poulain@gmail.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
David S. Miller [Mon, 31 Jul 2017 02:28:08 +0000 (19:28 -0700)]
Merge branch 'net-sched-actions-improve-dump-performance'
Jamal Hadi Salim says:
====================
net sched actions: improve dump performance
Changes since v11:
------------------
1) Jiri - renames: nla_value to value and nla_selector to selector
2) Jiri - rename: validate_nla_bitfield_32 to validate_nla_bitfield_32
3) Jiri - rename: NLA_BITFIELD_32 to NLA_BITFIELD32
4) Jiri - remove unnecessary break when we return in case statement
5) Jiri - rename and move nla_get_bitfield_32 to an earlier patch
6) Jiri - xmas tree alignment of var declaration
7) Jiri - rename all declarations of bitfield 32 vars to be consistent ("bf")
8) Jiri - improve validate_nla_bitfield32() validation to disallow valid
bit values that are not selected by the selector
Changes since v10:
-----------------
1) Jiri: move type->validate_content() to its own patch
Jamal: decided to remove it altogether so we can get this patch set in.
2) Change name of NLA_FLAG_BITS to NLA_BITFIELD_32 based on discussions
with D. Ahern and Jiri. D. Ahern suggests to make this a variable bitmap size.
My analysis at this point is it too complex and i only need a few bit
flags. If we run out of bits someone else can create a new NLA_BITFIELD_XXX
and start using that. So please let this go.
3) Jamal - Add Suggested-by: Jiri for type NLA_BITFIELD_32
4) Jiri: Change name allowed_flags to tcaa_root_flags_allowed
5) Jiri: Introduce nla_get_flag_bits_values() helper instead of using
memcpy for retrieving nla_bitfield_32 fields.
Changes since v9:
-----------------
1) General consensus:
- remove again the use of BIT() to maintain uapi consistency ;->
1) Jiri:
- Add a new netlink type NLA_FLAG_BITS to check for valid bits
and use it instead of inline vetting (patch 4/4 now)
Changes since v8:
-----------------
1) Jiri:
- Add back the use of BIT(). Eventually fix iproute2 instead
- Rename VALID_TCA_FLAGS to VALID_TCA_ROOT_FLAGS
Changes since v7:
-----------------
Jamal:
No changes.
Patch 1 went out twice. Resend without two copies of patch 1
changes since v6:
-----------------
1) DaveM:
New rules for netlink messages. From now on we are going to start
checking for bits that are not used and rejecting anything we dont
understand. In the future this is going to require major changes
to user space code (tc etc). This is just a start.
To quote, David:
"
Again, bits you aren't using now, make sure userspace doesn't
set them. And if it does, reject.
"
Added checks for ensuring things work as above.
2) Jiri:
a)Fix the commit message to properly use "Fixes" description
b)Align assignments for nla_policy
Changes since v5:
----------------
0)
Remove use of BIT() because it is kernel specific. Requires a separate
patch (Jiri can submit that in his cleanups)
1)To paraphrase Eric D.
"memcpy(nla_data(count_attr), &cb->args[1], sizeof(u32));
wont work on 64bit BE machines because cb->args[1]
(which is 64 bit is larger in size than sizeof(u32))"
Fixed
2) Jiri Pirko
i) Spotted a bug fix mixed in the patch for wrong TLV
fix. Add patch 1/3 to address this. Make part of this
series because of dependencies.
ii) Rename ACT_LARGE_DUMP_ON -> TCA_FLAG_LARGE_DUMP_ON
iii) Satisfy Jiri's obsession against the noun "tcaa"
a)Rename struct nlattr *tcaa --> struct nlattr *tb
b)Rename TCAA_ACT_XXX -> TCA_ROOT_XXX
Changes since v4:
-----------------
1) Eric D.
pointed out that when all skb space is used up by the dump
there will be no space to insert the TCAA_ACT_COUNT attribute.
2) Jiri:
i) Change:
enum {
TCAA_UNSPEC,
TCAA_ACT_TAB,
TCAA_ACT_FLAGS,
TCAA_ACT_COUNT,
TCAA_ACT_TIME_FILTER,
__TCAA_MAX
};
to:
enum {
TCAA_UNSPEC,
TCAA_ACT_TAB,
TCAA_ACT_FLAGS,
TCAA_ACT_COUNT,
__TCAA_MAX,
};
Jiri plans to followup with the rest of the code to make the
style consistent.
ii) Rename attribute TCAA_ACT_TIME_FILTER --> TCAA_ACT_TIME_DELTA
iii) Rename variable jiffy_filter --> jiffy_since
iv) Rename msecs_filter --> msecs_since
v) get rid of unused cb->args[0] and rename cb->args[4] to cb->args[0]
Earlier Changes
----------------
- Jiri mostly on names of things.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jamal Hadi Salim [Sun, 30 Jul 2017 17:24:52 +0000 (13:24 -0400)]
net sched actions: add time filter for action dumping
This patch adds support for filtering based on time since last used.
When we are dumping a large number of actions it is useful to
have the option of filtering based on when the action was last
used to reduce the amount of data crossing to user space.
With this patch the user space app sets the TCA_ROOT_TIME_DELTA
attribute with the value in milliseconds with "time of interest
since now". The kernel converts this to jiffies and does the
filtering comparison matching entries that have seen activity
since then and returns them to user space.
Old kernels and old tc continue to work in legacy mode since
they dont specify this attribute.
Some example (we have 400 actions bound to 400 filters); at
installation time. Using updated when tc setting the time of
interest to 120 seconds earlier (we see 400 actions):
prompt$ hackedtc actions ls action gact since 120000| grep index | wc -l
400
go get some coffee and wait for > 120 seconds and try again:
prompt$ hackedtc actions ls action gact since 120000 | grep index | wc -l
0
Lets see a filter bound to one of these actions:
....
filter pref 10 u32
filter pref 10 u32 fh 800: ht divisor 1
filter pref 10 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:10 (rule hit 2 success 1)
match
7f000002/
ffffffff at 12 (success 1 )
action order 1: gact action pass
random type none pass val 0
index 23 ref 2 bind 1 installed 1145 sec used 802 sec
Action statistics:
Sent 84 bytes 1 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
....
that coffee took long, no? It was good.
Now lets ping -c 1 127.0.0.2, then run the actions again:
prompt$ hackedtc actions ls action gact since 120 | grep index | wc -l
1
More details please:
prompt$ hackedtc -s actions ls action gact since 120000
action order 0: gact action pass
random type none pass val 0
index 23 ref 2 bind 1 installed 1270 sec used 30 sec
Action statistics:
Sent 168 bytes 2 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
And the filter?
filter pref 10 u32
filter pref 10 u32 fh 800: ht divisor 1
filter pref 10 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:10 (rule hit 4 success 2)
match
7f000002/
ffffffff at 12 (success 2 )
action order 1: gact action pass
random type none pass val 0
index 23 ref 2 bind 1 installed 1324 sec used 84 sec
Action statistics:
Sent 168 bytes 2 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jamal Hadi Salim [Sun, 30 Jul 2017 17:24:51 +0000 (13:24 -0400)]
net sched actions: dump more than TCA_ACT_MAX_PRIO actions per batch
When you dump hundreds of thousands of actions, getting only 32 per
dump batch even when the socket buffer and memory allocations allow
is inefficient.
With this change, the user will get as many as possibly fitting
within the given constraints available to the kernel.
The top level action TLV space is extended. An attribute
TCA_ROOT_FLAGS is used to carry flags; flag TCA_FLAG_LARGE_DUMP_ON
is set by the user indicating the user is capable of processing
these large dumps. Older user space which doesnt set this flag
doesnt get the large (than 32) batches.
The kernel uses the TCA_ROOT_COUNT attribute to tell the user how many
actions are put in a single batch. As such user space app knows how long
to iterate (independent of the type of action being dumped)
instead of hardcoded maximum of 32 thus maintaining backward compat.
Some results dumping 1.5M actions below:
first an unpatched tc which doesnt understand these features...
prompt$ time -p tc actions ls action gact | grep index | wc -l
1500000
real 1388.43
user 2.07
sys 1386.79
Now lets see a patched tc which sets the correct flags when requesting
a dump:
prompt$ time -p updatedtc actions ls action gact | grep index | wc -l
1500000
real 178.13
user 2.02
sys 176.96
That is about 8x performance improvement for tc app which sets its
receive buffer to about 32K.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jamal Hadi Salim [Sun, 30 Jul 2017 17:24:50 +0000 (13:24 -0400)]
net sched actions: Use proper root attribute table for actions
Bug fix for an issue which has been around for about a decade.
We got away with it because the enumeration was larger than needed.
Fixes:
7ba699c604ab ("[NET_SCHED]: Convert actions from rtnetlink to new netlink API")
Suggested-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jamal Hadi Salim [Sun, 30 Jul 2017 17:24:49 +0000 (13:24 -0400)]
net netlink: Add new type NLA_BITFIELD32
Generic bitflags attribute content sent to the kernel by user.
With this netlink attr type the user can either set or unset a
flag in the kernel.
The value is a bitmap that defines the bit values being set
The selector is a bitmask that defines which value bit is to be
considered.
A check is made to ensure the rules that a kernel subsystem always
conforms to bitflags the kernel already knows about. i.e
if the user tries to set a bit flag that is not understood then
the _it will be rejected_.
In the most basic form, the user specifies the attribute policy as:
[ATTR_GOO] = { .type = NLA_BITFIELD32, .validation_data = &myvalidflags },
where myvalidflags is the bit mask of the flags the kernel understands.
If the user _does not_ provide myvalidflags then the attribute will
also be rejected.
Examples:
value = 0x0, and selector = 0x1
implies we are selecting bit 1 and we want to set its value to 0.
value = 0x2, and selector = 0x2
implies we are selecting bit 2 and we want to set its value to 1.
Suggested-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 30 Jul 2017 17:36:05 +0000 (19:36 +0200)]
net: fec: Allow reception of frames bigger than 1522 bytes
The FEC Receive Control Register has a 14 bit field indicating the
longest frame that may be received. It is being set to 1522. Frames
longer than this are discarded, but counted as being in error.
When using DSA, frames from the switch has an additional header,
either 4 or 8 bytes if a Marvell switch is used. Thus a full MTU frame
of 1522 bytes received by the switch on a port becomes 1530 bytes when
passed to the host via the FEC interface.
Change the maximum receive size to 2048 - 64, where 64 is the maximum
rx_alignment applied on the receive buffer for AVB capable FEC
cores. Use this value also for the maximum receive buffer size. The
driver is already allocating a receive SKB of 2048 bytes, so this
change should not have any significant effects.
Tested on imx51, imx6, vf610.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 30 Jul 2017 20:11:06 +0000 (22:11 +0200)]
net: fec: Issue error for missing but expected PHY
If the PHY is missing but expected, e.g. because of a typ0 in the dt
file, it is not possible to open the interface. ip link returns:
RTNETLINK answers: No such device
It is not very obvious what the problem is. Add a netdev_err() in this
case to make it easier to debug the issue.
[ 21.409385] fec
2188000.ethernet eth0: Unable to connect to phy
RTNETLINK answers: No such device
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 31 Jul 2017 02:23:29 +0000 (19:23 -0700)]
Merge branch 'dsa-lan9303-Fix-MDIO-issues'
Egil Hjelmeland says:
====================
net: dsa: lan9303: Fix MDIO issues.
This series fix the MDIO interface for the lan9303 DSA driver.
Bugs found after testing on actual HW.
This series is extracted from the first patch of my first large
series. Significant changes from that version are:
- use mdiobus_write_nested, mdiobus_read_nested.
- EXPORT lan9303_indirect_phy_ops
Unfortunately I do not have access to i2c based system for
testing.
Changes from first version:
- Change EXPORT_SYMBOL to EXPORT_SYMBOL_GPL
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Egil Hjelmeland [Sun, 30 Jul 2017 17:58:56 +0000 (19:58 +0200)]
net: dsa: lan9303: MDIO access phy registers directly
Indirect access (PMI) to phy register only work in I2C mode. In
MDIO mode phy registers must be accessed directly. Introduced
struct lan9303_phy_ops to handle the two modes.
Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Egil Hjelmeland [Sun, 30 Jul 2017 17:58:55 +0000 (19:58 +0200)]
net: dsa: lan9303: Renamed indirect phy access functions
Preparing for the following fix of MDIO phy access:
Renamed functions that access PHY 1 and 2 indirectly through PMI
registers.
lan9303_port_phy_reg_wait_for_completion() to
lan9303_indirect_phy_wait_for_completion()
lan9303_port_phy_reg_read() to
lan9303_indirect_phy_read()
lan9303_port_phy_reg_write() to
lan9303_indirect_phy_write()
Also changed "val" parameter of lan9303_indirect_phy_write() to u16,
for clarity.
Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Egil Hjelmeland [Sun, 30 Jul 2017 17:58:54 +0000 (19:58 +0200)]
net: dsa: lan9303: Multiply by 4 to get MDIO register
lan9303_mdio_write()/_read() must multiply register number by 4 to get
offset.
Added some commments to the register definitions.
Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Egil Hjelmeland [Sun, 30 Jul 2017 17:58:53 +0000 (19:58 +0200)]
net: dsa: lan9303: Fix lan9303_detect_phy_setup() for MDIO
Handle that MDIO read with no response return 0xffff.
Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 30 Jul 2017 19:40:36 +0000 (12:40 -0700)]
Linux 4.13-rc3
Linus Torvalds [Sun, 30 Jul 2017 19:19:35 +0000 (12:19 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A small set of x86 fixes:
- prevent the kernel from using the EFI reboot method when EFI is
disabled.
- two patches addressing clang issues"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Disable the address-of-packed-member compiler warning
x86/efi: Fix reboot_mode when EFI runtime services are disabled
x86/boot: #undef memcpy() et al in string.c
Linus Torvalds [Sun, 30 Jul 2017 18:54:08 +0000 (11:54 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"Two patches addressing build warnings caused by inconsistent kernel
doc comments"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/wait: Clean up some documentation warnings
sched/core: Fix some documentation build warnings
Linus Torvalds [Sun, 30 Jul 2017 18:52:15 +0000 (11:52 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A couple of fixes for performance counters and kprobes:
- a series of small patches which make the uncore performance
counters on Skylake server systems work correctly
- add a missing instruction slot release to the failure path of
kprobes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kprobes/x86: Release insn_slot in failure path
perf/x86/intel/uncore: Fix missing marker for skx_uncore_cha_extra_regs
perf/x86/intel/uncore: Fix SKX CHA event extra regs
perf/x86/intel/uncore: Remove invalid Skylake server CHA filter field
perf/x86/intel/uncore: Fix Skylake server CHA LLC_LOOKUP event umask
perf/x86/intel/uncore: Fix Skylake server PCU PMU event format
perf/x86/intel/uncore: Fix Skylake UPI PMU event masks
Linus Torvalds [Sun, 30 Jul 2017 18:27:33 +0000 (11:27 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"Fix for a regression caused by the conversion of x86 to the generic
hotplug code.
Instead of doing a plain single line revert, this adds a pile of
comments so the semantics of the force argument are clear"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/cpuhotplug: Revert "Set force affinity flag on hotplug migration"
Daniel Borkmann [Fri, 28 Jul 2017 15:05:25 +0000 (17:05 +0200)]
bpf: fix bpf_prog_get_info_by_fd to dump correct xlated_prog_len
bpf_prog_size(prog->len) is not the correct length we want to dump
back to user space. The code in bpf_prog_get_info_by_fd() uses this
to copy prog->insnsi to user space, but bpf_prog_size(prog->len) also
includes the size of struct bpf_prog itself plus program instructions
and is usually used either in context of accounting or for bpf_prog_alloc()
et al, thus we copy out of bounds in bpf_prog_get_info_by_fd()
potentially. Use the correct bpf_prog_insn_size() instead.
Fixes:
1e2709769086 ("bpf: Add BPF_OBJ_GET_INFO_BY_FD")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Fri, 28 Jul 2017 14:41:37 +0000 (16:41 +0200)]
tcp: avoid bogus gcc-7 array-bounds warning
When using CONFIG_UBSAN_SANITIZE_ALL, the TCP code produces a
false-positive warning:
net/ipv4/tcp_output.c: In function 'tcp_connect':
net/ipv4/tcp_output.c:2207:40: error: array subscript is below array bounds [-Werror=array-bounds]
tp->chrono_stat[tp->chrono_type - 1] += now - tp->chrono_start;
^~
net/ipv4/tcp_output.c:2207:40: error: array subscript is below array bounds [-Werror=array-bounds]
tp->chrono_stat[tp->chrono_type - 1] += now - tp->chrono_start;
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
I have opened a gcc bug for this, but distros have already shipped
compilers with this problem, and it's not clear yet whether there is
a way for gcc to avoid the warning. As the problem is related to the
bitfield access, this introduces a temporary variable to store the old
enum value.
I did not notice this warning earlier, since UBSAN is disabled when
building with COMPILE_TEST, and that was always turned on in both
allmodconfig and randconfig tests.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81601
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 30 Jul 2017 06:23:45 +0000 (23:23 -0700)]
Merge branch 'ethtool-fec'
Roopa Prabhu says:
====================
ethtool: support for forward error correction mode setting on a link
Forward Error Correction (FEC) modes i.e Base-R
and Reed-Solomon modes are introduced in 25G/40G/100G standards
for providing good BER at high speeds. Various networking devices
which support 25G/40G/100G provides ability to manage supported FEC
modes and the lack of FEC encoding control and reporting today is a
source for interoperability issues for many vendors.
FEC capability as well as specific FEC mode i.e. Base-R
or RS modes can be requested or advertised through bits D44:47 of base link
codeword.
This patch set intends to provide option under ethtool to manage and
report FEC encoding settings for networking devices as per IEEE 802.3
bj, bm and by specs.
v2 :
- minor patch format fixes and typos pointed out by Andrew
- there was a pending discussion on the use of 'auto' vs
'automatic' for fec settings. I have left it as 'auto'
because in most cases today auto is used in place of
automatic to represent automatically generated values.
We use it in other networking config too. I would prefer
leaving it as auto.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Casey Leedom [Thu, 27 Jul 2017 23:47:28 +0000 (16:47 -0700)]
cxgb4: ethtool forward error correction management support
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Casey Leedom [Thu, 27 Jul 2017 23:47:27 +0000 (16:47 -0700)]
cxgb4: core hardware/firmware support for Forward Error Correction on a link
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vidya Sagar Ravipati [Thu, 27 Jul 2017 23:47:26 +0000 (16:47 -0700)]
net: ethtool: add support for forward error correction modes
Forward Error Correction (FEC) modes i.e Base-R
and Reed-Solomon modes are introduced in 25G/40G/100G standards
for providing good BER at high speeds. Various networking devices
which support 25G/40G/100G provides ability to manage supported FEC
modes and the lack of FEC encoding control and reporting today is a
source for interoperability issues for many vendors.
FEC capability as well as specific FEC mode i.e. Base-R
or RS modes can be requested or advertised through bits D44:47 of
base link codeword.
This patch set intends to provide option under ethtool to manage
and report FEC encoding settings for networking devices as per
IEEE 802.3 bj, bm and by specs.
set-fec/show-fec option(s) are designed to provide control and
report the FEC encoding on the link.
SET FEC option:
root@tor: ethtool --set-fec swp1 encoding [off | RS | BaseR | auto]
Encoding: Types of encoding
Off : Turning off any encoding
RS : enforcing RS-FEC encoding on supported speeds
BaseR : enforcing Base R encoding on supported speeds
Auto : IEEE defaults for the speed/medium combination
Here are a few examples of what we would expect if encoding=auto:
- if autoneg is on, we are expecting FEC to be negotiated as on or off
as long as protocol supports it
- if the hardware is capable of detecting the FEC encoding on it's
receiver it will reconfigure its encoder to match
- in absence of the above, the configuration would be set to IEEE
defaults.
>From our understanding , this is essentially what most hardware/driver
combinations are doing today in the absence of a way for users to
control the behavior.
SHOW FEC option:
root@tor: ethtool --show-fec swp1
FEC parameters for swp1:
Active FEC encodings: RS
Configured FEC encodings: RS | BaseR
ETHTOOL DEVNAME output modification:
ethtool devname output:
root@tor:~# ethtool swp1
Settings for swp1:
root@hpe-7712-03:~# ethtool swp18
Settings for swp18:
Supported ports: [ FIBRE ]
Supported link modes: 40000baseCR4/Full
40000baseSR4/Full
40000baseLR4/Full
100000baseSR4/Full
100000baseCR4/Full
100000baseLR4_ER4/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Supported FEC modes: [RS | BaseR | None | Not reported]
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: [RS | BaseR | None | Not reported]
<<<< One or more FEC modes
Speed: 100000Mb/s
Duplex: Full
Port: FIBRE
PHYAD: 106
Transceiver: internal
Auto-negotiation: off
Link detected: yes
This patch includes following changes
a) New ETHTOOL_SFECPARAM/SFECPARAM API, handled by
the new get_fecparam/set_fecparam callbacks, provides support
for configuration of forward error correction modes.
b) Link mode bits for FEC modes i.e. None (No FEC mode), RS, BaseR/FC
are defined so that users can configure these fec modes for supported
and advertising fields as part of link autonegotiation.
Signed-off-by: Vidya Sagar Ravipati <vidya.chowdary@gmail.com>
Signed-off-by: Dustin Byford <dustin@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 29 Jul 2017 22:30:08 +0000 (15:30 -0700)]
Merge tag 'wireless-drivers-for-davem-2017-07-28' of git://git./linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.13
Two fixes for for brcmfmac, the crash was reported by two people
already so it's a high priority fix.
brcmfmac
* fix a crash in skb headroom handling in v4.13-rc1
* fix a memory leak due to a merge error in v4.6
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 29 Jul 2017 22:25:44 +0000 (15:25 -0700)]
Merge branch 'netvsc-minor-fixes-and-optimization'
Stephen Hemminger says:
====================
netvsc: minor fixes and optimization
This is a subset of earlier submission with a few more fixes
found during testing. The are two small optimizations, one is to
better manage the receive completion ring, and the other is removing
one unneeded level of indirection.
Will submit the improved VF support and buffer sizing in a later
patch so they get more review.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Fri, 28 Jul 2017 15:59:47 +0000 (08:59 -0700)]
netvsc: signal host if receive ring is emptied
Latency improvement related to NAPI conversion.
If all packets are processed from receive ring then need
to signal host.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Fri, 28 Jul 2017 15:59:46 +0000 (08:59 -0700)]
netvsc: fix error unwind on device setup failure
If setting receive buffer fails, the error unwind would cause
kernel panic because it was not correctly doing RCU and NAPI
unwind. RCU'd pointer needs to be reset to NULL, and NAPI needs
to be disabled not deleted.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Fri, 28 Jul 2017 15:59:45 +0000 (08:59 -0700)]
netvsc: optimize receive completions
Optimize how receive completion ring are managed.
* Allocate only as many slots as needed for all buffers from host
* Allocate before setting up sub channel for better error detection
* Don't need to keep copy of initial receive section message
* Precompute the watermark for when receive flushing is needed
* Replace division with conditional test
* Replace atomic per-device variable with per-channel check.
* Handle corner case where receive completion send
fails if ring buffer to host is full.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Fri, 28 Jul 2017 15:59:44 +0000 (08:59 -0700)]
netvsc: remove unnecessary indirection of page_buffer
The internal API was passing struct hv_page_buffer **
when only simple struct hv_page_buffer * was necessary
for passing an array.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>