migration: Cleanup postcopy_preempt_setup()

Since we just dropped the only case where postcopy_preempt_setup() can
return an error, it doesn't need a retval anymore because it never fails.
Move the preempt check to the caller, preparing it to be used elsewhere to
do nothing but as simple as kicking the async connection.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Rework multi-channel checks on URI

The whole idea of multi-channel checks was not properly done, IMHO.

Currently we check multi-channel in a lot of places, but actually that's
not needed because we only need to check it right after we get the URI and
that should be it.

If the URI check succeeded, we should never need to check it again because
we must have it.  If it check fails, we should fail immediately on either
the qmp_migrate or qmp_migrate_incoming, instead of failingg it later after
the connection established.

Neither should we fail any set capabiliities like what we used to do here:

5ad15e8614 ("migration: allow enabling mutilfd for specific protocol only", 2021-10-19)

Because logically the URI will only be set later after the capability is
set, so it doesn't make a lot of sense to check the URI type when setting
the capability, because we're checking the cap with an old URI passed in,
and that may not even be the URI we're going to use later.

This patch mostly reverted all such checks for before, dropping the
variable migrate_allow_multi_channels and helpers.  Instead, add a common
helper to check URI for multi-channels for either qmp_migrate and
qmp_migrate_incoming and that should do all the proper checks.  The failure
will only trigger with the "migrate" or "migrate_incoming" command, or when
user specified "-incoming xxx" where "xxx" is not "defer".

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

Update bench-code for addressing CI problem

Unit test code is in test-xbzrle.c, and benchmark code is in xbzrle-bench.c
for performance benchmarking. we have modified xbzrle-bench.c to address
CI problem.

Signed-off-by: ling xu <ling1.xu@intel.com>
Co-authored-by: Zhou Zhao <zhou.zhao@intel.com>
Co-authored-by: Jun Jin <jun.i.jin@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

AVX512 support for xbzrle_encode_buffer

This commit is the same with [PATCH v6 1/2], and provides avx512 support for xbzrle_encode_buffer
function to accelerate xbzrle encoding speed. Runtime check of avx512
support and benchmark for this feature are added. Compared with C
version of xbzrle_encode_buffer function, avx512 version can achieve
50%-70% performance improvement on benchmarking. In addition, if dirty
data is randomly located in 4K page, the avx512 version can achieve
almost 140% performance gain.

Signed-off-by: ling xu <ling1.xu@intel.com>
Co-authored-by: Zhou Zhao <zhou.zhao@intel.com>
Co-authored-by: Jun Jin <jun.i.jin@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: I messed state_pending_exact/estimate

I called the helper function from the wrong top level function.

This code was introduced in:

commit c8df4a7aeffcb46020f610526eea621fa5b0cd47
Author: Juan Quintela <quintela@redhat.com>
Date:   Mon Oct 3 02:00:03 2022 +0200

    migration: Split save_live_pending() into state_pending_*

    We split the function into to:

    - state_pending_estimate: We estimate the remaining state size without
      stopping the machine.

    - state pending_exact: We calculate the exact amount of remaining
      state.

Thanks to Avihai Horon <avihaih@nvidia.com> for finding it.

Fixes:c8df4a7aeffcb46020f610526eea621fa5b0cd47

When we introduced that patch, we enden calling

state_pending_estimate() helper from qemu_savevm_statepending_exact()
and
state_pending_exact() helper from qemu_savevm_statepending_estimate()

This patch fixes it.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Make ram_save_target_page() a pointer

We are going to create a new function for multifd latest in the series.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: Calculate ram size once

We are recalculating ram size continously, when we know that it don't
change during migration.  Create a field in RAMState to track it.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>

migration: Split ram_bytes_total_common() in two functions

It is just a big if in the middle of the function, and we need two
functions anways.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---

Reindent to make Phillipe happy (and CODING_STYLE)

migration: Make find_dirty_block() return a single parameter

We used to return two bools, just return a single int with the
following meaning:

old return / again / new return
false        false   PAGE_ALL_CLEAN
false        true    PAGE_TRY_AGAIN
true         true    PAGE_DIRTY_FOUND  /* We don't care about again at all */

Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Simplify ram_find_and_save_block()

We will need later that find_dirty_block() return errors, so
simplify the loop.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

util/userfaultfd: Support /dev/userfaultfd

Teach QEMU to use /dev/userfaultfd when it existed and fallback to the
system call if either it's not there or doesn't have enough permission.

Firstly, as long as the app has permission to access /dev/userfaultfd, it
always have the ability to trap kernel faults which QEMU mostly wants.
Meanwhile, in some context (e.g. containers) the userfaultfd syscall can be
forbidden, so it can be the major way to use postcopy in a restricted
environment with strict seccomp setup.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

linux-headers: Update to v6.1

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

multifd: Remove some redundant code

Clean up some unnecessary code

Signed-off-by: Li Zhang <lizhang@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>

multifd: cleanup the function multifd_channel_connect

Cleanup multifd_channel_connect

Signed-off-by: Li Zhang <lizhang@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Remove spurious files

I introduced spurious files on my tree during a rebase:

commit ebfc57871506b3fe36cc41f69ee3ad31a34afd63
Author: Zhenzhong Duan <zhenzhong.duan@intel.com>
Date:   Mon Oct 17 15:53:51 2022 +0800

    multifd: Fix flush of zero copy page send request

    Make IO channel flush call after the inflight request has been drained
    in multifd thread, or else we may missed to flush the inflight request.

Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
To make things worse, it appears like Zhenzhong is the one to blame.

for(int i=0; i < 1000000; i++) {
printf("I will not do rebases when I am tired\n");
}

Sorry, Juan.

Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>

Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging

Pull request

A few fixes that I've picked up.

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmPlEFsACgkQnKSrs4Gr
# c8h3OggAj5TeIB/R6F69vHIuoqogJELm5jVkPoXd1VK+nAayEXHFmEfUi72JIh62
# l8E4NOuUIxwSXdD2HLH/CpezBh5EVW/LJ9AfRUXCWV65KL92dkZoQyxonNQMKdQ3
# pxj7zwHrlsdORPfRSnFVaGksaIdePgj46CjSQh8IF8RMvYMVF9hG3ias7rT+EWi7
# SidPse4tik3WPxWteEXQd/8fdUehloPOB6Xm8pFilr0oR/TlRyMRWeaUs5+6WUIy
# y1+mqObsY22DvIDqsqTbZDULnHXAI5zxy9gwHi+DhRi3DbuAxdjH1Vclk0Y9wsGY
# QKhoFtGhfOd+94uSusp5UbG5iNvbuQ==
# =HZZr
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 09 Feb 2023 15:25:15 GMT
# gpg:                using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
  iotests/detect-zeroes-registered-buf: add new test
  qemu-io: add -r option to register I/O buffer
  qemu-io: use BdrvRequestFlags instead of int
  block: fix detect-zeroes= with BDRV_REQ_REGISTERED_BUF
  virtio-blk: add missing AioContext lock
  vhost-user-fs: Back up vqs before cleaning up vhost_dev

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

iotests/detect-zeroes-registered-buf: add new test

This regression test demonstrates that detect-zeroes works with
registered buffers. Bug details:
https://gitlab.com/qemu-project/qemu/-/issues/1404

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230207203719.242926-5-stefanha@redhat.com>

qemu-io: add -r option to register I/O buffer

The blk_register_buf() API is an optimization hint that allows some
block drivers to avoid I/O buffer housekeeping or bounce buffers.

Add an -r option to register the I/O buffer so that qemu-io can be used
to test the blk_register_buf() API. The next commit will add a test that
uses the new option.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230207203719.242926-4-stefanha@redhat.com>

qemu-io: use BdrvRequestFlags instead of int

The block layer APIs use BdrvRequestFlags while qemu-io code uses int.
Although the code compiles and runs fine, BdrvRequestFlags is clearer
because it differentiates between other types of flags like bdrv_open()
flags.

This is purely refactoring.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230207203719.242926-3-stefanha@redhat.com>

block: fix detect-zeroes= with BDRV_REQ_REGISTERED_BUF

When a write request is converted into a write zeroes request by the
detect-zeroes= feature, it is no longer associated with an I/O buffer.
The BDRV_REQ_REGISTERED_BUF flag doesn't make sense without an I/O
buffer and must be cleared because bdrv_co_do_pwrite_zeroes() fails with
-EINVAL when it's set.

Fiona Ebner <f.ebner@proxmox.com> bisected and diagnosed this QEMU 7.2
regression where writes containing zeroes to a blockdev with
discard=unmap,detect-zeroes=unmap fail.

Buglink: https://gitlab.com/qemu-project/qemu/-/issues/1404
Fixes: e8b6535533be ("block: add BDRV_REQ_REGISTERED_BUF request flag")
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230207203719.242926-2-stefanha@redhat.com>

virtio-blk: add missing AioContext lock

virtio_blk_update_config() calls blk_get_geometry and blk_getlength,
and both functions eventually end up calling bdrv_poll_co when not
running in a coroutine:
- blk_getlength is a co_wrapper_mixed function
- blk_get_geometry calls bdrv_get_geometry -> bdrv_nb_sectors, a
  co_wrapper_mixed function too

Since we are not running in a coroutine, we need to take s->blk
AioContext lock, otherwise bdrv_poll_co will inevitably call
AIO_WAIT_WHILE and therefore try to un unlock() an AioContext lock
that was never acquired.

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=2167838

Steps to reproduce the issue: simply boot a VM with
-object '{"qom-type":"iothread","id":"iothread1"}' \
-blockdev '{"driver":"file","filename":"$QCOW2","aio":"native","node-name":"libvirt-1-storage","cache":{"direct":true,"no-flush":false},"auto-read-only":true,"discard":"unmap"}' \
-blockdev '{"node-name":"libvirt-1-format","read-only":false,"cache":{"direct":true,"no-flush":false},"driver":"qcow2","file":"libvirt-1-storage"}' \
-device virtio-blk-pci,iothread=iothread1,drive=libvirt-1-format,id=virtio-disk0,bootindex=1,write-cache=on

and observe that it will fail not manage to boot with "qemu_mutex_unlock_impl: Operation not permitted"

Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lukáš Doktor <ldoktor@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230208111148.1040083-1-eesposit@redhat.com>

vhost-user-fs: Back up vqs before cleaning up vhost_dev

vhost_dev_cleanup() clears vhost_dev so back up its vqs member to free
the memory pointed by the member.

Fixes: 98fc1ada4c ("virtio: add vhost-user-fs base device")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230130140225.77964-1-akihiko.odaki@daynix.com>

tests/qtest/netdev-socket: Raise connection timeout to 60 seconds

The netdev-socket test intermittently fails on our s390x CI runner:

633/659 ERROR:../tests/qtest/netdev-socket.c:197:test_stream_unix:
assertion failed (resp == expect): ("st0: index=0,type=stream,connection error\r\n" == "st0: index=0,type=stream,unix:/tmp/netdev-socket.GZUG01/stream_unix\r\n")
ERROR
633/659 qemu:qtest+qtest-xtensa / qtest-xtensa/netdev-socket
ERROR           5.47s   killed by signal 6 SIGABRT

This may just be because when the machine is under heavy load
running the CI tests it hits the timeout before the QEMU
under test has started to the point of being able to respond
to HMP queries.

Bump the timeout to 60 seconds to see if the intermittent
goes away.

Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230207165119.1479132-1-peter.maydell@linaro.org

Merge tag 'pull-tricore-20230208' of https://github.com/bkoppelmann/qemu into staging

tricore insn bugfixes for qemu 8.0

# -----BEGIN PGP SIGNATURE-----
#
# iQJTBAABCgA9FiEEbmNqfoPy3Qz6bm43CtLGOWtpyhQFAmPjZjUfHGtiYXN0aWFu
# QG1haWwudW5pLXBhZGVyYm9ybi5kZQAKCRAK0sY5a2nKFHBmD/9r8dgNWWMYdXrC
# PO9fNg1lk+zR9AfTBc7YonuNo/aRmoh48r36FCIKPVWIspyXaEpjyCUAA79Lmhw7
# XGRqDbosa7TNSyQgOfqKyxAc7uISRBSFIQocbTCKTcpwcBpOUhSQFMjwc4yj1HGE
# D7511nyPd4ekqTVzaLrXwWVIFdefW85F7DoXK2G5k7NyO1I2TBoFdbjosDff4cOu
# T0ZYPTmZoSvUgP80WUyQPcs0lKk56oFqFsgjtqhmhdGf4FNxxrIMHNhJeZJsHt6I
# aG1MZbVAyOAGXyLZmu6PFxVOckkoMMZMxXV6rMfgmztt8PxRcvzUu5DceovI2xt4
# OQb6b13XwHB2ShUCqM8eQAQyAUMrYdjVMu5gLsO5rpzcZz+2cZmUUGXtjZojLRzY
# m2IyCQIDjR6GlBnLqzD8lKWbW8c7v6bHnhyYZpy1K1I54/dsbia9Hl40v/Ebch5f
# CYfgJQFe5CfkyY+Ya9bItTf/cfcnmOKpKhmFy3r005BzbSVWJ+Ax3AXKuRey5MF7
# itHS2wVYq5Fap/SCS4slL/4u/Doo9DybwLRdTXtqMxUcl7WpyjA5L/W5VhJrDb+a
# F21uAtqaYf+0UHLmGOJRMx3LAf/YvvPQLYO8FmnfVoS6t6V+/B5/eyXPRwmX1mJC
# jLu6hzzX4kR9zZ7lNhOlv0d9vkt5Sg==
# =83AO
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 08 Feb 2023 09:07:01 GMT
# gpg:                using RSA key 6E636A7E83F2DD0CFA6E6E370AD2C6396B69CA14
# gpg:                issuer "kbastian@mail.uni-paderborn.de"
# gpg: Good signature from "Bastian Koppelmann <kbastian@mail.uni-paderborn.de>" [full]
# Primary key fingerprint: 6E63 6A7E 83F2 DD0C FA6E  6E37 0AD2 C639 6B69 CA14

* tag 'pull-tricore-20230208' of https://github.com/bkoppelmann/qemu:
  tests/tcg/tricore: Add test for ld.h
  target/tricore: Fix OPC1_16_SRO_LD_H translation
  tests/tcg/tricore: Add LD.BU tests
  target/tricore: Fix OPC2_32_BO_LD_BU_PREINC
  tests/tcg/tricore: Add OPC2_32_RRRR_DEXTR tests
  target/tricore: Fix OPC2_32_RRRR_DEXTR
  tests/tcg/tricore: Add tests for RRPW_DEXTR
  target/tricore: Fix RRPW_DEXTR
  tests/tcg/tricore: Add test for OPC2_32_RCRW_INSERT
  target/tricore: Fix OPC2_32_RCRW_INSERT translation
  tests/tcg/tricore: Add test for OPC2_32_RCRW_IMASK
  target/tricore: Fix OPC2_32_RCRW_IMASK translation

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'pull-include-2023-02-06-v2' of https://repo.or.cz/qemu/armbru into staging

Header cleanup patches for 2023-02-06

# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmPjQRUSHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTWHwQAI5D2HTRt3peFSPg/tFuYqSGtOobzM5x
# xdZxjWCtGV+dZ4TsyQ7yJkQ2i6aPjs0LzmTnTIsmf+p1OJSthvp4fQUzfXQauiJy
# OnNA76v7WjiXB8u8tcXtEkkHNmccp8n4KMjk33TfK/HQVx7lZ2EFurlCkvBr5wki
# FuDVad6R43ChmvBWdCUOi6G1IklAihm8AN4lBJu3iC7U8bjW4FmLLMitcu5OyKgt
# v9V4XFAe4eYUIPZ6uH5Lpr5m/qtrRXLe9KOdRUR2vDVL18Cf6Zl7mrUNtv7iV5TI
# hBOA12ZP5XXf81FXl7e8y3Xi2KXvb/el0wQ7SvtE7XB3Pdbfa5WSGKOc3VxYLmBA
# 4xUnEbzAogrrruovdk1bmh2LnVzCH66m72xaLCHBvjOU3M6V2B0eeaZ35FxNuFcB
# toHPAjeuzWkDAscVYcYKuPwnkNOMNqHxEdihrgy6mYLr6nauIYr7Lqgs3SqGqpct
# /HGy683+J+AqnHFTk1MTRftDxqk/Nku6ntAxLXndkpm3uDvu+iV5d3BfK3A9t7d1
# A2Y983DU6SiVwpMIv2eDL8sXYxuwIs56ZmPYIcSbqzpCXtdFqwWOTeFET/4vD+8t
# V3YKJ27jmWQ9bxbLHGPPYSKheuCVBIGsqxouE/Pbj5nXRKm/TeGp+20a4dWdE08r
# 2WTLAQbVQGD4
# =5TPW
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 08 Feb 2023 06:28:37 GMT
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* tag 'pull-include-2023-02-06-v2' of https://repo.or.cz/qemu/armbru:
  Drop duplicate #include
  Don't include headers already included by qemu/osdep.h
  Fix non-first inclusions of qemu/osdep.h
  accel: Clean up includes
  block: Clean up includes
  riscv: Clean up includes
  target/hexagon: Clean up includes
  net: Clean up includes
  migration: Clean up includes
  qga: Clean up includes
  hw/tricore: Clean up includes
  hw/input: Clean up includes
  hw/cxl: Clean up includes
  crypto: Clean up includes
  bsd-user: Clean up includes
  scripts/clean-includes: Improve --git commit message
  scripts/clean-includes: Skip symbolic links
  scripts/clean-includes: Don't claim duplicate headers found when not
  scripts/clean-includes: Fully skip / ignore files

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests/tcg/tricore: Add test for ld.h

this exercises the error reported in
https://gitlab.com/qemu-project/qemu/-/issues/652.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230203132132.511254-1-kbastian@mail.uni-paderborn.de>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

target/tricore: Fix OPC1_16_SRO_LD_H translation

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Eitan Eliahu <eitan_eliahu@hotmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/652
Message-Id: <20230112142258.514079-1-anton.kochkov@proton.me>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

tests/tcg/tricore: Add LD.BU tests

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230202120432.1268-11-kbastian@mail.uni-paderborn.de>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

target/tricore: Fix OPC2_32_BO_LD_BU_PREINC

we were sign extending the result of the load, while the instruction
clearly states that the result should be unsigned.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230202120432.1268-10-kbastian@mail.uni-paderborn.de>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

tests/tcg/tricore: Add OPC2_32_RRRR_DEXTR tests

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230202120432.1268-9-kbastian@mail.uni-paderborn.de>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

target/tricore: Fix OPC2_32_RRRR_DEXTR

if cpu_gpr_d[r3] == 0 then we were shifting the lower register to the
right by 32 which is undefined behaviour. In this case the TriCore would
do nothing an just return the higher register cpu_reg_d[r1]. We fixed
that by detecting whether cpu_gpr_d[r3] was zero and cleared the lower
register.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230202120432.1268-8-kbastian@mail.uni-paderborn.de>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

tests/tcg/tricore: Add tests for RRPW_DEXTR

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230202120432.1268-7-kbastian@mail.uni-paderborn.de>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

target/tricore: Fix RRPW_DEXTR

if we used const16 == 0 we would crash qemu with the error:
../tcg/tcg-op.c:196: tcg_gen_shri_i32: Assertion `arg2 >= 0 && arg2 < 32' failed

This whole instruction can be handled by 'tcg_gen_extract2_tl' which
takes care of this special case as well.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230202120432.1268-6-kbastian@mail.uni-paderborn.de>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

tests/tcg/tricore: Add test for OPC2_32_RCRW_INSERT

DREG_RS2 and DREG_CALC_RESULT were mapped to the same register which
would not trigger https://gitlab.com/qemu-project/qemu/-/issues/653. So
let's make each register unique.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230202120432.1268-5-kbastian@mail.uni-paderborn.de>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

target/tricore: Fix OPC2_32_RCRW_INSERT translation

we were mixing up the "c" and "d" registers. We used "d" as a
destination register und "c" as the source. According to the TriCore ISA
manual 1.6 vol 2 it is the other way round.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/653
Message-Id: <20230202120432.1268-4-kbastian@mail.uni-paderborn.de>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

tests/tcg/tricore: Add test for OPC2_32_RCRW_IMASK

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230202120432.1268-3-kbastian@mail.uni-paderborn.de>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

target/tricore: Fix OPC2_32_RCRW_IMASK translation

we were mixing up the "c" and "d" registers. We used "d" as a
destination register und "c" as the source. According to the TriCore ISA
manual 1.6 vol 2 it is the other way round.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/653
Message-Id: <20230202120432.1268-2-kbastian@mail.uni-paderborn.de>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

Drop duplicate #include

Tracked down with the help of scripts/clean-includes.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230202133830.2152150-21-armbru@redhat.com>

Don't include headers already included by qemu/osdep.h

This commit was created with scripts/clean-includes.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-19-armbru@redhat.com>

Fix non-first inclusions of qemu/osdep.h

This commit was created with scripts/clean-includes.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230202133830.2152150-18-armbru@redhat.com>

accel: Clean up includes

This commit was created with scripts/clean-includes.

All .c should include qemu/osdep.h first.  The script performs three
related cleanups:

* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c  already includes
  it.  Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
  Drop these, too.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-17-armbru@redhat.com>

block: Clean up includes

This commit was created with scripts/clean-includes.

All .c should include qemu/osdep.h first.  The script performs three
related cleanups:

* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c  already includes
  it.  Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
  Drop these, too.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20230202133830.2152150-16-armbru@redhat.com>

riscv: Clean up includes

This commit was created with scripts/clean-includes.

All .c should include qemu/osdep.h first.  The script performs three
related cleanups:

* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c  already includes
  it.  Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
  Drop these, too.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-15-armbru@redhat.com>

target/hexagon: Clean up includes

This commit was created with scripts/clean-includes.

All .c should include qemu/osdep.h first.  The script performs three
related cleanups:

* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c  already includes
  it.  Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
  Drop these, too.

Changes to standalone programs dropped, because these intentionally
don't use qemu/osdep.h:

    target/hexagon/gen_dectree_import.c
    target/hexagon/gen_semantics.c
    target/hexagon/idef-parser/idef-parser.h
    target/hexagon/idef-parser/parser-helpers.c
    target/hexagon/idef-parser/parser-helpers.h

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-14-armbru@redhat.com>

net: Clean up includes

This commit was created with scripts/clean-includes.

All .c should include qemu/osdep.h first.  The script performs three
related cleanups:

* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c  already includes
  it.  Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
  Drop these, too.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-13-armbru@redhat.com>

migration: Clean up includes

This commit was created with scripts/clean-includes.

All .c should include qemu/osdep.h first.  The script performs three
related cleanups:

* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c  already includes
  it.  Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
  Drop these, too.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230202133830.2152150-12-armbru@redhat.com>
[Straightforward conflict with commit d5890ea0722 resolved]

qga: Clean up includes

This commit was created with scripts/clean-includes.

All .c should include qemu/osdep.h first.  The script performs three
related cleanups:

* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c  already includes
  it.  Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
  Drop these, too.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-11-armbru@redhat.com>

hw/tricore: Clean up includes

This commit was created with scripts/clean-includes.

All .c should include qemu/osdep.h first.  The script performs three
related cleanups:

* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c  already includes
  it.  Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
  Drop these, too.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-10-armbru@redhat.com>

hw/input: Clean up includes

This commit was created with scripts/clean-includes.

All .c should include qemu/osdep.h first.  The script performs three
related cleanups:

* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c  already includes
  it.  Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
  Drop these, too.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-9-armbru@redhat.com>

hw/cxl: Clean up includes

This commit was created with scripts/clean-includes.

All .c should include qemu/osdep.h first.  The script performs three
related cleanups:

* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c  already includes
  it.  Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
  Drop these, too.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-8-armbru@redhat.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

crypto: Clean up includes

This commit was created with scripts/clean-includes.

All .c should include qemu/osdep.h first.  The script performs three
related cleanups:

* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c  already includes
  it.  Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
  Drop these, too.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-7-armbru@redhat.com>

bsd-user: Clean up includes

This commit was created with scripts/clean-includes.

All .c should include qemu/osdep.h first.  The script performs three
related cleanups:

* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c  already includes
  it.  Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
  Drop these, too.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-6-armbru@redhat.com>

scripts/clean-includes: Improve --git commit message

The script drops #include "qemu/osdep.h" from headers.  Mention it in
the commit message it uses for --git.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230202133830.2152150-5-armbru@redhat.com>

scripts/clean-includes: Skip symbolic links

When a symbolic link points to a file that needs cleaning, the script
replaces the link with a cleaned regular file.  Not wanted; skip them.

We have a few symbolic links under subprojects/libvduse/ and
subprojects/libvhost-user/.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20230202133830.2152150-4-armbru@redhat.com>

scripts/clean-includes: Don't claim duplicate headers found when not

When running with --check-dup-head, the script always claims it "Found
duplicate header file includes."  Fix to do it only when it actually
found some.

Fixes: d66253e46ae2 ("scripts/clean-includes: added duplicate #include check")
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20230202133830.2152150-3-armbru@redhat.com>

scripts/clean-includes: Fully skip / ignore files

When clean-includes claims to skip or ignore a file, only the part
that sanitizes use of qemu/osdep.h skips the file.  The part that
looks for duplicate #include does not, and neither does committing to
Git.

The latter can get unrelated stuff included in the commit, but only if
you run clean-includes in a dirty tree, which is unwise.  Messed up
when we added skipping in commit fd3e39a40c "scripts/clean-includes:
Enhance to handle header files".

The former can cause bogus reports for --check-dup-head.  Added in
commit d66253e46a "scripts/clean-includes: added duplicate #include
check", duplicating the prior mistake.

Fix the script to fully skip files.

Fixes: fd3e39a40ca2 ("scripts/clean-includes: Enhance to handle header files")
Fixes: d66253e46ae2 ("scripts/clean-includes: added duplicate #include check")
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20230202133830.2152150-2-armbru@redhat.com>

Merge tag 'for-upstream-py38' of https://gitlab.com/bonzini/qemu into staging

Update CentOS 8 playbook and CI configuration to Python 3.8

The playbook has already been run by Cleber on the machine.

# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmPiN6MUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroN1Xwf+IPCNoE0kRY4Ne6Rk6wa6HuKs72yW
# zCd1k9jAvy5trroKxbaoqLYaZlh+R+s4KNIifsVmMjtAI57LfI8+5SW0AhnQLWCO
# 4MXwI96tscR2lw7nYZcjwEx7hW+MElTgmTiz+FrqrXKkcwBYveu+f2nOfVGzcC+w
# d4aGnpoaPcnqHs5TxIhxedbxXCNXHMhSYPAThSKVAtrnUxH7pYHGHjU0WbRFlEkV
# oDIpSsbut+zwNxVWwaL9j6TiNNgKU2JSyZ8YA+sylUMjrPSVFs9K3p9sQnuGA08I
# uhKGPVUOsIoagshe41wBxEN4dMyQBNUWODOcngkrOwNJZ1mzgCumKPLJBg==
# =0wnj
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Feb 2023 11:36:03 GMT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* tag 'for-upstream-py38' of https://gitlab.com/bonzini/qemu:
  scripts/ci: bump CentOS Python to 3.8
  scripts/ci: unify package lists for CentOS in build-environment files
  scripts/ci: add capstone development packages
  scripts/ci: support CentOS Stream 8 in build-environment.yaml
  scripts/ci: remove unnecessary checks from CentOS playbook

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'pull-aspeed-20230207' of https://github.com/legoater/qemu into staging

aspeed queue:

* various small cleanups and fixes
* new variant of the supermicrox11-bmc machine using an ast2500-a1 SoC
* at24c_eeprom extension to define eeprom contents with static arrays
* ast10x0 model and test improvements
* avocado update of images to use the latest

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmPiByEACgkQUaNDx8/7
# 7KF1nw/7BxVb8bxO5T00AnGDFNahDq3ItyisrbOkElDw18oN1eULrtZFH1UopjDE
# 3HKwR2nb4X7MfcLirVXXxwO1GgIxUkeCsVEY6hpg3TxDPRhPW2toNpNt/WCfFKgq
# ZdYdaKgkON/xHQPv6kgQzU2n9Zpuznj0CE9A3k1mAyBcCSitsvu4TW6AQBKmLgUR
# 9lu61onfX9XoPxZv3abuY3c3UyzevOc6BUT67dmr8naAhHLyBU+DWAW6Kg0Dtc9j
# p+bwxIDRimK50DJt9l13OLSAJyhrW1gMsPPGb+48OClpEOhHwq8oqRuMFpbHaQ0/
# 2MMtMbavXtzBScfmLzR3yw2IwohxSXKMe+7irkJiG/hc8/gtpRATaaS+zfvS0rla
# QybWYtJyjmW+QUOnmBsKGwT0PWJcOd3bKtVPgPd7WGeHGVtTBOqU/svExaO+gIv8
# uX1gOelEgLmLenUjc/Wp4cHgnePTBK8vG1g3IrEtcCblhwpr0e3/aJgHGgO3cQzH
# X9P2buwHyLzjsie9S1ebG9Ceg/VsGQpxNGISZdG+Z4c3+GYu5gcGQcqIAuFmwBnE
# QHSNHJXITyWjo7UuqL7e1J7vROUKn0S15V9MO/yOmZgkqubu4Gt3jGcJtIGqIBlu
# MFra7SiVjKBnt6PD3aKEdD9uahbqFUfmX9411ZmYUUzpfflKnCQ=
# =IY/i
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Feb 2023 08:09:05 GMT
# gpg:                using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B  0B60 51A3 43C7 CFFB ECA1

* tag 'pull-aspeed-20230207' of https://github.com/legoater/qemu: (25 commits)
  aspeed/sdmc: Drop unnecessary scu include
  tests/avocado: Test Aspeed Zephyr SDK v00.01.08 on AST1030 board
  hw/arm/aspeed_ast10x0: Add TODO comment to use Cortex-M4F
  hw/arm/aspeed_ast10x0: Map HACE peripheral
  hw/arm/aspeed_ast10x0: Map the secure SRAM
  hw/arm/aspeed_ast10x0: Map I3C peripheral
  hw/arm/aspeed_ast10x0: Add various unimplemented peripherals
  hw/misc/aspeed_hace: Do not crash if address_space_map() failed
  hw/watchdog/wdt_aspeed: Log unimplemented registers as UNIMP level
  hw/watchdog/wdt_aspeed: Extend MMIO range to cover more registers
  hw/watchdog/wdt_aspeed: Rename MMIO region size as 'iosize'
  hw/nvram/eeprom_at24c: Make reset behavior more like hardware
  hw/arm/aspeed: Add aspeed_eeprom.c
  hw/nvram/eeprom_at24c: Add init_rom field and at24c_eeprom_init_rom helper
  hw/arm/aspeed: Replace aspeed_eeprom_init with at24c_eeprom_init
  hw/arm: Extract at24c_eeprom_init helper from Aspeed and Nuvoton boards
  hw/core/loader: Remove declarations of option_rom_has_mr/rom_file_has_mr
  tests/avocado/machine_aspeed.py: Mask systemd services to speed up SDK boot
  tests/avocado/machine_aspeed.py: update buildroot tests
  m25p80: Add the is25wp256 SFPD table
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'pull-riscv-to-apply-20230207' of https://github.com/alistair23/qemu into staging

Third RISC-V PR for QEMU 8.0

* Update disas for xnor/orn/andn and slli.uw
* Update opentitan IRQs
* Fix rom code when Zicsr is disabled
* Update VS timer whenever htimedelta changes
* A collection of fixes for virtulisation
* Set tval for triggered watchpoints
* Cleanups for board and FDT creation
* Add support for the T-Head vendor extensions
* A fix for virtual instr exception
* Fix ctzw behavior
* Fix SBI getchar handler for KVM

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmPh+QQACgkQIeENKd+X
# cFSdHwf9HQkO8/zTnWUFCbLVQAV3RB32i6E26uNC4+fQBpcqRWAel2PMYGi6x0H/
# fU43B5YpS7Ddfcc1ql6pJlisqsjkIsQBYjOeUfiMozLIR0dvX14jgUMxc0A8e8sZ
# uv3iRXjkVz/7bEWIdflPcaXgXh74HcQCPgMDsteluZYaz4yRGP6SvI9UJHqe4tjI
# HbiYmP1pcWFGDsAlKx7KbHfH/v9CE03odN3MLzwdsGYekUaFkdLlj7hmyamnqbAh
# OR1y29i2od/8uJMeIu5R8rnGdWoWetCZWP0z2xv3rrZuUzMJ6VXHcdWsY9ycomJs
# rYA0NB/ezmnKX+QAf+8TzW2nybG+5Q==
# =XLpK
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Feb 2023 07:08:52 GMT
# gpg:                using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8  CE8F 21E1 0D29 DF97 7054

* tag 'pull-riscv-to-apply-20230207' of https://github.com/alistair23/qemu: (32 commits)
  hw/riscv: virt: Simplify virt_{get,set}_aclint()
  target/riscv: fix SBI getchar handler for KVM
  target/riscv: fix ctzw behavior
  target/riscv: fix for virtual instr exception
  target/riscv: add a MAINTAINERS entry for XThead* extension support
  RISC-V: Adding XTheadFmv ISA extension
  RISC-V: Add initial support for T-Head C906
  RISC-V: Set minimum priv version for Zfh to 1.11
  RISC-V: Adding T-Head FMemIdx extension
  RISC-V: Adding T-Head MemIdx extension
  RISC-V: Adding T-Head MemPair extension
  RISC-V: Adding T-Head multiply-accumulate instructions
  RISC-V: Adding XTheadCondMov ISA extension
  RISC-V: Adding XTheadBs ISA extension
  RISC-V: Adding XTheadBb ISA extension
  RISC-V: Adding XTheadBa ISA extension
  RISC-V: Adding XTheadSync ISA extension
  RISC-V: Adding XTheadCmo ISA extension
  hw/riscv: change riscv_compute_fdt_addr() semantics
  hw/riscv: split fdt address calculation from fdt load
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'migration-20230206-pull-request' of https://gitlab.com/juan.quintela/qemu into staging

Migration Pull request

In this try
- rebase to latest upstream
- same than previous patch
- fix compilation on non linux (userfaultfd.h) (me)
- query-migrationthreads (jiang)
- fix race on reading MultiFDPages_t.block (zhenzhong)
- fix flush of zero copy page send reuest  (zhenzhong)

Please apply.

Previous try:
It includes:
- David Hildenbrand fixes for virtio-men
- David Gilbert canary to detect problems
- Fix for rdma return values (Fiona)
- Peter Xu uffd_open fixes
- Peter Xu show right downtime for postcopy
- manish.mishra msg fix fixes
- my vfio changes.

Please apply.

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmPhobYACgkQ9IfvGFhy
# 1yMNaA/9EHDPqrI1HL/VkJG4nNOOsQR7RbburXEberZOzvLjnqpjUD3Ls9qV6rx+
# ieHa5T4imYJFk72Wa5vx4r1/dCjtJD2W6jg5+/0nTvYAHrs1U1VRqpuTr0HiXdbJ
# ZLLCnW5eDyO3eMaOX0MUkgHgL0FNkc/Lq5ViCTFsMu9O9xMuDLLdAC3cdvslKuOu
# X1gKByr9jT817Y9e36amYmRaJKC6Cr/PIekNVFu12HBW79pPusLX8KWEf4RBw4HR
# sPwTvMCR/BwZ0+2Lppan60G5rt/ZxDu40oU7y+RHlfWqevl4hDM84/nhjMvEgzc5
# a4Ahe2ERGLwwnC8z3l7v9+pEzSGzDoPcnRGvZcpUpk68wTDtxd5Bdq8CwmNUfL07
# VzWcYpH0yvmwjBba9jfn9fAVgnG5rVp558XcYLIII3wEToty3UDtm43wSdj2CGr6
# cu+IPAp+n/I5G9SRYBTU9ozJz45ttnEe0hxUtZ4I3MuhzHi1VEDAqTWM/X0LyS41
# TB3Y5B2KKpJYbPyZEH4nyTeetR2k7alTFzahCgKqVfOgL0nJx54petjS1K+B1P72
# g6lhP9WnQ33W+M8S7J/aGEaDJd1lFyFB2Rdjn2ZZnASH/fR9j0mFmXWvulXtjFNp
# Sfim3887+Iv4Uzw4VWEe3mM5Ypi/Ba2CmuTjy/pM08Ey8X1Qs5o=
# =ZQbR
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Feb 2023 00:56:22 GMT
# gpg:                using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg:                 aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03  4B82 F487 EF18 5872 D723

* tag 'migration-20230206-pull-request' of https://gitlab.com/juan.quintela/qemu: (30 commits)
  migration: save/delete migration thread info
  migration: Introduce interface query-migrationthreads
  multifd: Fix flush of zero copy page send request
  multifd: Fix a race on reading MultiFDPages_t.block
  migration: check magic value for deciding the mapping of channels
  io: Add support for MSG_PEEK for socket channel
  migration/dirtyrate: Show sample pages only in page-sampling mode
  migration: Perform vmsd structure check during tests
  migration: Add canary to VMSTATE_END_OF_LIST
  migration/rdma: fix return value for qio_channel_rdma_{readv,writev}
  migration: Show downtime during postcopy phase
  virtio-mem: Proper support for preallocation with migration
  virtio-mem: Migrate immutable properties early
  virtio-mem: Fail if a memory backend with "prealloc=on" is specified
  migration/ram: Factor out check for advised postcopy
  migration/vmstate: Introduce VMSTATE_WITH_TMP_TEST() and VMSTATE_BITMAP_TEST()
  migration/savevm: Allow immutable device state to be migrated early (i.e., before RAM)
  migration/savevm: Prepare vmdesc json writer in qemu_savevm_state_setup()
  migration/savevm: Move more savevm handling into vmstate_save()
  migration/ram: Optimize ram_write_tracking_start() for RamDiscardManager
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'qemu-macppc-20230206' of https://github.com/mcayland/qemu into staging

qemu-macppc patches for 8.0

# -----BEGIN PGP SIGNATURE-----
#
# iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmPheL4eHG1hcmsuY2F2
# ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIflMUIAKeDljnot7I3cF3y
# XnkPtPOUrzurii348hgQAULbDcnffkwstoML8vVpjt6tK9fZDduWB2bcXm00BFPr
# tFXmW/IZaQ1Z9yEXEpFRUU1L68gGYyXCFEmBjE4fE2WoSRRQObkx7IGgFLBk7L3t
# hyLx1kSBziSxgnkoX8ZQqMTweLjcllWA8s9+EtfpyTOu0mewKtbcAEyUwaJQTPPT
# tfgMxjXdNquK89KXGelDiGHAKzMgCAnX2jVEkrw1PKKgLsf1FrQVDPJkWMhWv82x
# FaCjyzL7YEn+h9Gd1j5JmhqYYKPF8akIs4bfrwcl9blyNRbb/NWF/odYgM1WIy8x
# fQDJcwc=
# =RB4n
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Feb 2023 22:01:34 GMT
# gpg:                using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg:                issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C  C9C4 5BC2 C56F AE0F 321F

* tag 'qemu-macppc-20230206' of https://github.com/mcayland/qemu:
  mac_oldworld: Allow specifying nvram backing store
  mac_nvram: Add block backend to persist NVRAM contents
  hw/misc/macio: Return bool from functions taking errp
  hw/misc/macio: Remove some single use local variables
  hw/misc/macio: Rename sysbus_dev to sbd for consistency and brevity
  hw/misc/macio: Avoid some QOM casts
  mac_{old,new}world: Use local variable instead of qdev_get_machine()
  input/adb: Only include header where needed

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

aspeed/sdmc: Drop unnecessary scu include

The model includes aspeed_scu.h but doesn't appear to require it.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230124062022.298230-1-joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

tests/avocado: Test Aspeed Zephyr SDK v00.01.08 on AST1030 board

Add a very quick test that runs some commands in a Zephyr shell:

  $ tests/venv/bin/avocado --show=app,console run -t os:zephyr tests/avocado
  (2/2) tests/avocado/machine_aspeed.py:AST1030Machine.test_ast1030_zephyros_1_07:
  console: *** Booting Zephyr OS build v00.01.07  ***
  console: ast1030_evb demo
  console: SOC: AST1030-A1
  console: uart:~$ kernel stacks
  console: 0x36910 wdt_background (real size 1024): unused 988 usage 36 / 1024 (3 %)
  console: 0x36ad8 shell_uart (real size 4096): unused 3084 usage 1012 / 4096 (24 %)
  console: 0x2edb8 ADC0       (real size 400): unused 260 usage 140 / 400 (35 %)
  console: 0x2f0f0 ADC1       (real size 400): unused 260 usage 140 / 400 (35 %)
  console: 0x3b098 sysworkq   (real size 1024): unused 860 usage 164 / 1024 (16 %)
  console: 0x36cc0 usbdworkq  (real size 1024): unused 860 usage 164 / 1024 (16 %)
  console: 0x36bd8 usbworkq   (real size 1024): unused 860 usage 164 / 1024 (16 %)
  console: 0x36a10 logging    (real size 768): unused 548 usage 220 / 768 (28 %)
  console: 0x36ef8 idle 00    (real size 320): unused 268 usage 52 / 320 (16 %)
  console: 0x47800 IRQ 00     (real size 2048): unused 1504 usage 544 / 2048 (26 %)
  console: uart:~$ otp info scu
  console: SCU     BIT   reg_protect     Description
  console: ____________________________________________________________________
  console: 0x500   0x0   0x0             Disable ARM CM4 CPU boot (TXD5)
  console: 0x500   0x1   0x0            /Reserved
  console: 0x500   0x2   0x0            \ "
  console: 0x500   0x3   0x0             Address offset of single chip ABR mode
  console: 0x500   0x4   0x0            /Reserved
  console: 0x500   0x5   0x0            | "
  console: 0x500   0x6   0x0            | "
  console: 0x500   0x7   0x0            | "
  console: 0x500   0x8   0x0            | "
  console: 0x500   0x9   0x0            | "
  console: 0x500   0xA   0x0            | "
  console: 0x500   0xB   0x0            | "
  console: 0x500   0xC   0x0            | "
  console: 0x500   0xD   0x0            | "
  console: 0x500   0xE   0x0            | "
  console: 0x500   0xF   0x0            | "
  console: 0x500   0x10  0x0            \ "
  console: 0x500   0x11  0x0             Disabl3 ARM JTAG debug
  console: 0x500   0x12  0x0            /Reserved
  console: 0x500   0x13  0x0            | "
  console: 0x500   0x14  0x0            | "
  console: 0x500   0x15  0x0            | "
  console: 0x500   0x16  0x0            | "
  console: 0x500   0x17  0x0            | "
  console: 0x500   0x18  0x0            | "
  console: 0x500   0x19  0x0            | "
  console: 0x500   0x1A  0x0            | "
  console: 0x500   0x1B  0x0            | "
  console: 0x500   0x1C  0x0            | "
  console: 0x500   0x1D  0x0            | "
  console: 0x500   0x1E  0x0            | "
  console: 0x500   0x1F  0x0            \ "
  console: 0x510   0x0   0x0            /Reserved
  console: 0x510   0x1   0x0            | "
  console: 0x510   0x2   0x0            | "
  console: 0x510   0x3   0x0            \ "
  console: 0x510   0x4   0x0             Disable debug interfaces
  console: 0x510   0x5   0x0            /Reserved
  console: 0x510   0x6   0x0            | "
  console: 0x510   0x7   0x0            \ "
  console: 0x510   0x8   0x0             Enable boot from Uart5 by Pin Strap
  console: 0x510   0x9   0x0            /Reserved
  console: 0x510   0xA   0x0            \ "
  console: 0x510   0xB   0x0             Enable boot SPI ABR
  console: 0x510   0xC   0x0             Boot SPI ABR Mode
  console: 0x510   0xD   0x0            /Boot SPI flash size
  console: 0x510   0xE   0x0            | "
  console: 0x510   0xF   0x0            \ "
  console: 0x510   0x10  0x0            /Reserved
  console: 0x510   0x11  0x0            | "
  console: 0x510   0x12  0x0            | "
  console: 0x510   0x13  0x0            | "
  console: 0x510   0x14  0x0            | "
  console: 0x510   0x15  0x0            \ "
  console: 0x510   0x16  0x0             Enable boot SPI auxiliary control pins
  console: 0x510   0x19  0x0            /Reserved
  console: 0x510   0x1A  0x0            | "
  console: 0x510   0x1B  0x0            | "
  console: 0x510   0x1C  0x0            | "
  console: 0x510   0x1D  0x0            | "
  console: 0x510   0x1E  0x0            | "
  console: 0x510   0x1F  0x0            \ "
  console: 0x510   0x1E  0x0             Enable dedicate GPIO strap pins
  console: 0x510   0x1F  0x0             Enable Secure Boot by Pin Strap
  console: uart:~$ hwinfo devid
  console: Length: 8
  console: ID: 0x0000018000000180
  console: uart:~$ crypto aes256_cbc_vault
  console: aes256_cbc vault key 1
  console: Was waiting for:
  console: 6b c1 be e2 2e 40 9f 96 e9 3d 7e 11 73 93 17 2a
  console: ae 2d 8a 57 1e 03 ac 9c 9e b7 6f ac 45 af 8e 51
  console: 30 c8 1c 46 a3 5c e4 11 e5 fb c1 19 1a 0a 52 ef
  console: f6 9f 24 45 df 4f 9b 17 ad 2b 41 7b e6 6c 37 10
  console: But got:
  console: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  console: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  console: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  console: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  console: uart:~$ random get
  console: 0x862460d
  console: uart:~$ i2c scan I2C_0
  console: 0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
  console: 00:             -- -- -- -- -- -- -- -- -- -- -- --
  console: 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
  console: 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
  console: 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
  console: 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
  console: 50: 50 -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
  console: 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
  console: 70: -- -- -- -- -- -- -- --
  console: 1 devices found on I2C_0
  console: uart:~$ kernel uptime
  console: Uptime: 9897 ms
  console: uart:~$ kernel reboot warm
  console: *** Booting Zephyr OS build v00.01.07  ***
  PASS (1.08 s)

Ref: https://github.com/AspeedTech-BMC/zephyr/releases/download/v00.01.07/Aspeed_Zephy_SDK_User_Guide_v00.01.07.pdf

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/arm/aspeed_ast10x0: Add TODO comment to use Cortex-M4F

This SoC uses a Cortex-M4F. QEMU only implements a M4,
which is good enough. Add a TODO note in case the M4F
is added.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/arm/aspeed_ast10x0: Map HACE peripheral

Since I don't have access to the datasheet, the relevant
values were found in:
https://github.com/AspeedTech-BMC/zephyr/blob/v00.01.08/dts/arm/aspeed/ast10x0.dtsi

Before on Zephyr:

  uart:~$ hash test
  sha256_test
  tv[0]:hash_final error
  sha384_test
  tv[0]:hash_final error
  sha512_test
  tv[0]:hash_final error
  [00:00:06.278,000] <err> hace_global: HACE poll timeout
  [00:00:09.324,000] <err> hace_global: HACE poll timeout
  [00:00:12.261,000] <err> hace_global: HACE poll timeout

  uart:~$ crypto aes256_cbc_vault
  aes256_cbc vault key 1
  [00:00:06.699,000] <inf> hace_global: aspeed_crypto_session_setup
  [00:00:06.699,000] <inf> hace_global: data->cmd: 1c2098
  [00:00:06.699,000] <inf> hace_global: crypto_data_src: 93340
  [00:00:06.699,000] <inf> hace_global: crypto_data_dst: 93348
  [00:00:06.699,000] <inf> hace_global: crypto_ctx_base: 93300
  [00:00:06.699,000] <inf> hace_global: crypto_data_len: 80000040
  [00:00:06.699,000] <inf> hace_global: crypto_cmd_reg:  11c2098
  [00:00:09.743,000] <inf> hace_global: HACE_STS: 0
  [00:00:09.743,000] <err> hace_global: HACE poll timeout
  [00:00:09.743,000] <err> crypto: CBC mode ENCRYPT - Failed
  [00:00:09.743,000] <inf> hace_global: aspeed_crypto_session_free
  uart:~$

After:

  uart:~$ hash test
  sha256_test
  tv[0]:PASS
  tv[1]:PASS
  tv[2]:PASS
  tv[3]:PASS
  tv[4]:PASS
  sha384_test
  tv[0]:PASS
  tv[1]:PASS
  tv[2]:PASS
  tv[3]:PASS
  tv[4]:PASS
  tv[5]:PASS
  sha512_test
  tv[0]:PASS
  tv[1]:PASS
  tv[2]:PASS
  tv[3]:PASS
  tv[4]:PASS
  tv[5]:PASS

  uart:~$ crypto aes256_cbc_vault
  aes256_cbc vault key 1
  Was waiting for:
  6b c1 be e2 2e 40 9f 96 e9 3d 7e 11 73 93 17 2a
  ae 2d 8a 57 1e 03 ac 9c 9e b7 6f ac 45 af 8e 51
  30 c8 1c 46 a3 5c e4 11 e5 fb c1 19 1a 0a 52 ef
  f6 9f 24 45 df 4f 9b 17 ad 2b 41 7b e6 6c 37 10

   But got:
  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

  [00:00:05.771,000] <inf> hace_global: aspeed_crypto_session_setup
  [00:00:05.772,000] <inf> hace_global: data->cmd: 1c2098
  [00:00:05.772,000] <inf> hace_global: crypto_data_src: 93340
  [00:00:05.772,000] <inf> hace_global: crypto_data_dst: 93348
  [00:00:05.772,000] <inf> hace_global: crypto_ctx_base: 93300
  [00:00:05.772,000] <inf> hace_global: crypto_data_len: 80000040
  [00:00:05.772,000] <inf> hace_global: crypto_cmd_reg:  11c2098
  [00:00:05.772,000] <inf> hace_global: HACE_STS: 1000
  [00:00:05.772,000] <inf> crypto: Output length (encryption): 80
  [00:00:05.772,000] <inf> hace_global: aspeed_crypto_session_free
  [00:00:05.772,000] <inf> hace_global: aspeed_crypto_session_setup
  [00:00:05.772,000] <inf> hace_global: data->cmd: 1c2018
  [00:00:05.772,000] <inf> hace_global: crypto_data_src: 93340
  [00:00:05.772,000] <inf> hace_global: crypto_data_dst: 93348
  [00:00:05.772,000] <inf> hace_global: crypto_ctx_base: 93300
  [00:00:05.772,000] <inf> hace_global: crypto_data_len: 80000040
  [00:00:05.772,000] <inf> hace_global: crypto_cmd_reg:  11c2018
  [00:00:05.772,000] <inf> hace_global: HACE_STS: 1000
  [00:00:05.772,000] <inf> crypto: Output length (decryption): 64
  [00:00:05.772,000] <err> crypto: CBC mode DECRYPT - Mismatch between plaintext and decrypted cipher text
  [00:00:05.774,000] <inf> hace_global: aspeed_crypto_session_free
  uart:~$

Reviewed-by: Peter Delevoryas <peter@pjd.dev>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/arm/aspeed_ast10x0: Map the secure SRAM

Some SRAM appears to be used by the Secure Boot unit and
crypto accelerators. Name it 'secure sram'.

Note, the SRAM base address was already present but unused
(the 'SBC' index is used for the MMIO peripheral).

Interestingly using CFLAGS=-Winitializer-overrides reports:

  ../hw/arm/aspeed_ast10x0.c:32:30: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides]
    [ASPEED_DEV_SBC]       = 0x7E6F2000,
                             ^~~~~~~~~~
  ../hw/arm/aspeed_ast10x0.c:24:30: note: previous initialization is here
    [ASPEED_DEV_SBC]       = 0x79000000,
                             ^~~~~~~~~~
This fixes with Zephyr:

  uart:~$ rsa test
  rsa test vector[0]:
  [00:00:26.156,000] <err> os: ***** BUS FAULT *****
  [00:00:26.157,000] <err> os:   Precise data bus error
  [00:00:26.157,000] <err> os:   BFAR Address: 0x79000000
  [00:00:26.158,000] <err> os: r0/a1:  0x79000000  r1/a2:  0x00000000  r2/a3:  0x00001800
  [00:00:26.158,000] <err> os: r3/a4:  0x79001800 r12/ip:  0x00000800 r14/lr:  0x0001098d
  [00:00:26.158,000] <err> os:  xpsr:  0x81000000
  [00:00:26.158,000] <err> os: Faulting instruction address (r15/pc): 0x0001e1bc
  [00:00:26.158,000] <err> os: >>> ZEPHYR FATAL ERROR 0: CPU exception on CPU 0
  [00:00:26.158,000] <err> os: Current thread: 0x38248 (shell_uart)
  [00:00:26.165,000] <err> os: Halting system

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Delevoryas <peter@pjd.dev>
[ clg: Fixed size of Secure Boot Controller Memory ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/arm/aspeed_ast10x0: Map I3C peripheral

Since I don't have access to the datasheet, the relevant
values were found in:
https://github.com/AspeedTech-BMC/zephyr/blob/v00.01.08/dts/arm/aspeed/ast10x0.dtsi

Reviewed-by: Peter Delevoryas <peter@pjd.dev>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/arm/aspeed_ast10x0: Add various unimplemented peripherals

Based on booting Zephyr demo from [1] running QEMU with
'-d unimp' and checking missing devices in [2].

[1] https://github.com/AspeedTech-BMC/zephyr/releases/tag/v00.01.07
[2] https://github.com/AspeedTech-BMC/zephyr/blob/v00.01.08/dts/arm/aspeed/ast10x0.dtsi

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/misc/aspeed_hace: Do not crash if address_space_map() failed

address_space_map() can fail:

  uart:~$ hash test
  sha256_test
  tv[0]:
  Segmentation fault: 11
  Thread 3 "qemu-system-arm" received signal SIGSEGV, Segmentation fault.
  gen_acc_mode_iov (req_len=0x7ffff18b7778, id=<optimized out>, iov=0x7ffff18b7780, s=0x555556ce0bd0)
      at ../hw/misc/aspeed_hace.c:171
  171         if (has_padding(s, &iov[id], *req_len, &total_msg_len, &pad_offset)) {
  (gdb) bt
  #0  gen_acc_mode_iov (req_len=0x7ffff18b7778, id=<optimized out>, iov=0x7ffff18b7780, s=0x555556ce0bd0)
      at ../hw/misc/aspeed_hace.c:171
  #1  do_hash_operation (s=s@entry=0x555556ce0bd0, algo=3, sg_mode=sg_mode@entry=true, acc_mode=acc_mode@entry=true)
      at ../hw/misc/aspeed_hace.c:224
  #2  0x00005555559bdbb8 in aspeed_hace_write (opaque=<optimized out>, addr=12, data=262488, size=<optimized out>)
      at ../hw/misc/aspeed_hace.c:358

This change doesn't fix much, but at least the guest
can't crash QEMU anymore. Instead it is still usable:

  uart:~$ hash test
  sha256_test
  tv[0]:hash_final error
  sha384_test
  tv[0]:hash_final error
  sha512_test
  tv[0]:hash_final error
  [00:00:06.278,000] <err> hace_global: HACE poll timeout
  [00:00:09.324,000] <err> hace_global: HACE poll timeout
  [00:00:12.261,000] <err> hace_global: HACE poll timeout
  uart:~$

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/watchdog/wdt_aspeed: Log unimplemented registers as UNIMP level

Add more Aspeed watchdog registers from [*].

Since guests can righteously access them, log the access at
'unimplemented' level instead of 'guest-errors'.

[*] https://github.com/AspeedTech-BMC/zephyr/blob/v00.01.08/drivers/watchdog/wdt_aspeed.c#L31

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Delevoryas <peter@pjd.dev>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/watchdog/wdt_aspeed: Extend MMIO range to cover more registers

When booting the Zephyr demo in [1] we get:

  aspeed.io: unimplemented device write (size 4, offset 0x185128, value 0x030f1ff1) <--
  aspeed.io: unimplemented device write (size 4, offset 0x18512c, value 0x03fffff1)

This corresponds to this Zephyr code [2]:

  static int aspeed_wdt_init(const struct device *dev)
  {
    const struct aspeed_wdt_config *config = dev->config;
    struct aspeed_wdt_data *const data = dev->data;
    uint32_t reg_val;

    /* disable WDT by default */
    reg_val = sys_read32(config->ctrl_base + WDT_CTRL_REG);
    reg_val &= ~WDT_CTRL_ENABLE;
    sys_write32(reg_val, config->ctrl_base + WDT_CTRL_REG);

    sys_write32(data->rst_mask1,
                config->ctrl_base + WDT_SW_RESET_MASK1_REG);   <------
    sys_write32(data->rst_mask2,
                config->ctrl_base + WDT_SW_RESET_MASK2_REG);

    return 0;
  }

The register definitions are [3]:

  #define WDT_RELOAD_VAL_REG          0x0004
  #define WDT_RESTART_REG             0x0008
  #define WDT_CTRL_REG                0x000C
  #define WDT_TIMEOUT_STATUS_REG      0x0010
  #define WDT_TIMEOUT_STATUS_CLR_REG  0x0014
  #define WDT_RESET_MASK1_REG         0x001C
  #define WDT_RESET_MASK2_REG         0x0020
  #define WDT_SW_RESET_MASK1_REG      0x0028   <------
  #define WDT_SW_RESET_MASK2_REG      0x002C
  #define WDT_SW_RESET_CTRL_REG       0x0024

Currently QEMU only cover a MMIO region of size 0x20:

  #define ASPEED_WDT_REGS_MAX        (0x20 / 4)

Change to map the whole 'iosize' which might be bigger, covering
the other registers. The MemoryRegionOps read/write handlers will
report the accesses as out-of-bounds guest-errors, but the next
commit will report them as unimplemented.

[1] https://github.com/AspeedTech-BMC/zephyr/releases/tag/v00.01.07
[2] https://github.com/AspeedTech-BMC/zephyr/commit/2e99f10ac27b
[3] https://github.com/AspeedTech-BMC/zephyr/blob/v00.01.08/drivers/watchdog/wdt_aspeed.c#L31

Reviewed-by: Peter Delevoryas <peter@pjd.dev>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/watchdog/wdt_aspeed: Rename MMIO region size as 'iosize'

Avoid confusing two different things:
- the WDT I/O region size ('iosize')
- at which offset the SoC map the WDT ('offset')
While it is often the same, we can map smaller region sizes
at larger offsets.

Here we are interested in the I/O region size, so rename as
'iosize'.

Reviewed-by: Peter Delevoryas <peter@pjd.dev>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[ clg: Introduced temporary wdt_offset variable ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/nvram/eeprom_at24c: Make reset behavior more like hardware

EEPROM's are a form of non-volatile memory. After power-cycling an EEPROM,
I would expect the I2C state machine to be reset to default values, but I
wouldn't really expect the memory to change at all.

The current implementation of the at24c EEPROM resets its internal memory on
reset. This matches the specification in docs/devel/reset.rst:

  Cold reset is supported by every resettable object. In QEMU, it means we reset
  to the initial state corresponding to the start of QEMU; this might differ
  from what is a real hardware cold reset. It differs from other resets (like
  warm or bus resets) which may keep certain parts untouched.

But differs from my intuition. For example, if someone writes some information
to an EEPROM, then AC power cycles their board, they would expect the EEPROM to
retain that information. It's very useful to be able to test things like this
in QEMU as well, to verify software instrumentation like determining the cause
of a reboot.

Fixes: 5d8424dbd3e8 ("nvram: add AT24Cx i2c eeprom")
Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Link: https://lore.kernel.org/r/20230128060543.95582-6-peter@pjd.dev
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/arm/aspeed: Add aspeed_eeprom.c

- Create aspeed_eeprom.c and aspeed_eeprom.h
- Include aspeed_eeprom.c in CONFIG_ASPEED meson source files
- Include aspeed_eeprom.h in aspeed.c
- Add fby35_bmc_fruid data
- Use new at24c_eeprom_init_rom helper to initialize BMC FRUID EEPROM with data
  from aspeed_eeprom.c

wget https://github.com/facebook/openbmc/releases/download/openbmc-e2294ff5d31d/fby35.mtd
qemu-system-aarch64 -machine fby35-bmc -nographic -mtdblock fby35.mtd
...
user: root
pass: 0penBmc
...
root@bmc-oob:~# fruid-util bb

FRU Information           : Baseboard
---------------           : ------------------
Chassis Type              : Rack Mount Chassis
Chassis Part Number       : N/A
Chassis Serial Number     : N/A
Board Mfg Date            : Fri Jan  7 10:30:00 2022
Board Mfg                 : XXXXXX
Board Product             : Management Board wBMC
Board Serial              : XXXXXXXXXXXXX
Board Part Number         : XXXXXXXXXXXXXX
Board FRU ID              : 1.0
Board Custom Data 1       : XXXXXXXXX
Board Custom Data 2       : XXXXXXXXXXXXXXXXXX
Product Manufacturer      : XXXXXX
Product Name              : Yosemite V3.5 EVT2
Product Part Number       : XXXXXXXXXXXXXX
Product Version           : EVT2
Product Serial            : XXXXXXXXXXXXX
Product Asset Tag         : XXXXXXX
Product FRU ID            : 1.0
Product Custom Data 1     : XXXXXXXXX
Product Custom Data 2     : N/A
root@bmc-oob:~# fruid-util bmc

FRU Information           : BMC
---------------           : ------------------
Board Mfg Date            : Mon Jan 10 21:42:00 2022
Board Mfg                 : XXXXXX
Board Product             : BMC Storage Module
Board Serial              : XXXXXXXXXXXXX
Board Part Number         : XXXXXXXXXXXXXX
Board FRU ID              : 1.0
Board Custom Data 1       : XXXXXXXXX
Board Custom Data 2       : XXXXXXXXXXXXXXXXXX
Product Manufacturer      : XXXXXX
Product Name              : Yosemite V3.5 EVT2
Product Part Number       : XXXXXXXXXXXXXX
Product Version           : EVT2
Product Serial            : XXXXXXXXXXXXX
Product Asset Tag         : XXXXXXX
Product FRU ID            : 1.0
Product Custom Data 1     : XXXXXXXXX
Product Custom Data 2     : Config A
root@bmc-oob:~# fruid-util nic

FRU Information           : NIC
---------------           : ------------------
Board Mfg Date            : Tue Nov  2 08:51:00 2021
Board Mfg                 : XXXXXXXX
Board Product             : Mellanox ConnectX-6 DX OCP3.0
Board Serial              : XXXXXXXXXXXXXXXXXXXXXXXX
Board Part Number         : XXXXXXXXXXXXXXXXXXXXX
Board FRU ID              : FRU Ver 0.02
Product Manufacturer      : XXXXXXXX
Product Name              : Mellanox ConnectX-6 DX OCP3.0
Product Part Number       : XXXXXXXXXXXXXXXXXXXXX
Product Version           : A9
Product Serial            : XXXXXXXXXXXXXXXXXXXXXXXX
Product Custom Data 3     : ConnectX-6 DX

Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Link: https://lore.kernel.org/r/20230128060543.95582-5-peter@pjd.dev
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/nvram/eeprom_at24c: Add init_rom field and at24c_eeprom_init_rom helper

Allows users to specify binary data to initialize an EEPROM, allowing users to
emulate data programmed at manufacturing time.

- Added init_rom and init_rom_size attributes to TYPE_AT24C_EE
- Added at24c_eeprom_init_rom helper function to initialize attributes
- If -drive property is provided, it overrides init_rom data

Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Ninad Palsule <ninadpalsule@us.ibm.com>
Link: https://lore.kernel.org/r/20230128060543.95582-4-peter@pjd.dev
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/arm/aspeed: Replace aspeed_eeprom_init with at24c_eeprom_init

aspeed_eeprom_init is an exact copy of at24c_eeprom_init, not needed.

Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Link: https://lore.kernel.org/r/20230128060543.95582-3-peter@pjd.dev
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/arm: Extract at24c_eeprom_init helper from Aspeed and Nuvoton boards

This helper is useful in board initialization because lets users initialize and
realize an EEPROM on an I2C bus with a single function call.

Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Link: https://lore.kernel.org/r/20230128060543.95582-2-peter@pjd.dev
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/core/loader: Remove declarations of option_rom_has_mr/rom_file_has_mr

These globals were moved to MachineClass by commit 71ae9e94d9 ("pc: Move
option_rom_has_mr/rom_file_has_mr globals to MachineClass"). Finish cleanup.

Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

tests/avocado/machine_aspeed.py: Mask systemd services to speed up SDK boot

Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20230119123449.531826-8-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

tests/avocado/machine_aspeed.py: update buildroot tests

Use buildroot 2022.11 based images plus some customization :

  - Linux version is bumped to 6.0.9 and kernel is built with a custom
    config similar to what OpenBMC provides.
  - U-Boot is switched to the one provided by OpenBMC for better support.
  - defconfigs includes more target tools for dev.

Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20230119123449.531826-7-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

m25p80: Add the is25wp256 SFPD table

Generated from hardware using the following command and then padding
with 0xff to fill out a power-of-2:
xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp

Cc: Michael Walle <michael@walle.cc>
Cc: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20221221122213.1458540-1-linux@roeck-us.net>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

avocado/boot_linux_console.py: Update ast2600 test

Update the test_arm_ast2600_debian test to

 - the latest Debian kernel
 - use the Rainier machine instead of Tacoma

Both of which contains support for more hardware and thus exercises more
of the hardware Qemu models.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220607011938.1676459-1-joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/net: Fix read of uninitialized memory in ftgmac100

With the `size += 4` before the call to `crc32`, the CRC calculation
would overrun the buffer. Size is used in the while loop starting on
line 1009 to determine how much data to write back, with the last
four bytes coming from `crc_ptr`, so do need to increase it, but should
do this after the computation.

I'm unsure why this use of uninitialized memory in the CRC doesn't
result in CRC errors, but it seems clear to me that it should not be
included in the calculation.

Signed-off-by: Stephen Longfield <slongfield@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20221220221437.3303721-1-slongfield@google.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

aspeed: Add Supermicro X11 SPI machine type

supermicrox11-bmc is configured with ast2400-a1 SoC. This does not match
the Supermicro documentation for X11 BMCs, and it does not match the
devicetree file in the Linux kernel.

As it turns out, some Supermicro X11 motherboards use AST2400 SoCs,
while others use AST2500.

Introduce new machine type supermicrox11-spi-bmc with AST2500 SoC
to match the devicetree description in the Linux kernel. Hardware
configuration details for this machine type are guesswork and taken
from defaults as well as from the Linux kernel devicetree file.

The new machine type was tested with aspeed-bmc-supermicro-x11spi.dts
from the Linux kernel and with Linux versions 6.0.3 and 6.1-rc2.
Linux booted successfully from initrd and from both SPI interfaces.
Ethernet interfaces were confirmed to be operational.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20221025165109.1226001-1-linux@roeck-us.net
[ clg: Renamed machine to 'supermicro-x11spi-bmc' ]
Message-Id: <20221025165109.1226001-1-linux@roeck-us.net>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

tests/avocado: Truncate M2S-FG484 SOM SPI flash to 16MiB

The M2S-FG484 SOM uses a 16 MiB SPI flash (Spansion
S25FL128SDPBHICO).  Since the test asset is bigger,
truncate it to the correct size to avoid when running
the test_arm_emcraft_sf2 test:

  qemu-system-arm: device requires 16777216 bytes, block backend provides 67108864 bytes

Add comment regarding the M2S-FG484 SOM hardware in
hw/arm/msf2-som.c.

Reported-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

tests/avocado: Introduce file_truncate()

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20230120134314.81956-2-philmd@linaro.org
[ clg: remove image_pow2ceil_expand() factoring ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/riscv: virt: Simplify virt_{get,set}_aclint()

There is no need to declare an intermediate "MachineState *ms".

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230206085007.3618715-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: fix SBI getchar handler for KVM

Character must be returned via ret[0] field (copied to a0 by KVM).

Return value should be set to 0 to indicate successful processing.

Signed-off-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230203135155.12449-1-vladimir.isaev@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: fix ctzw behavior

According to spec, ctzw should work with 32-bit register, not 64.

For example, previous implementation returns 33 for (1<<33) input
when the new one returns 32.

Signed-off-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230204082312.43557-1-vladimir.isaev@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: fix for virtual instr exception

commit fb3f3730e4 added mechanism to generate virtual instruction
exception during instruction decode when virt is enabled.

However in some situations, illegal instruction exception can be raised
due to state of CPU. One such situation is implementing branch tracking.
[1] An indirect branch if doesn't land on a landing pad instruction, then
cpu must raise an illegal instruction exception.
Implementation would raise such expcetion due to missing landing pad inst
and not due to decode. Thus DisasContext must have `virt_inst_excp`
initialized to false during DisasContxt initialization for TB.

[1] - https://github.com/riscv/riscv-cfi

Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230127191758.755844-1-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: add a MAINTAINERS entry for XThead* extension support

The XThead* extensions are maintained by T-Head and VRULL.
Adding a point of contact from both companies.

Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-15-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

RISC-V: Adding XTheadFmv ISA extension

This patch adds support for the XTheadFmv ISA extension.
The patch uses the T-Head specific decoder and translation.

Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-14-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

RISC-V: Add initial support for T-Head C906

This patch adds the T-Head C906 to the list of known CPUs.
Selecting this CPUs will automatically enable the available
ISA extensions of the CPUs (incl. vendor extensions).

Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-13-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

RISC-V: Set minimum priv version for Zfh to 1.11

There are no differences for floating point instructions in priv version 1.11
and 1.12. There is also no dependency for Zfh to priv version 1.12.
Therefore allow Zfh to be enabled for priv version 1.11.

Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-12-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

RISC-V: Adding T-Head FMemIdx extension

This patch adds support for the T-Head FMemIdx instructions.
The patch uses the T-Head specific decoder and translation.

Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-11-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

RISC-V: Adding T-Head MemIdx extension

This patch adds support for the T-Head MemIdx instructions.
The patch uses the T-Head specific decoder and translation.

Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-10-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

RISC-V: Adding T-Head MemPair extension

This patch adds support for the T-Head MemPair instructions.
The patch uses the T-Head specific decoder and translation.

Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-9-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

RISC-V: Adding T-Head multiply-accumulate instructions

This patch adds support for the T-Head MAC instructions.
The patch uses the T-Head specific decoder and translation.

Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-8-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

RISC-V: Adding XTheadCondMov ISA extension

This patch adds support for the XTheadCondMov ISA extension.
The patch uses the T-Head specific decoder and translation.

Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-7-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

RISC-V: Adding XTheadBs ISA extension

This patch adds support for the XTheadBs ISA extension.
The patch uses the T-Head specific decoder and translation.

Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-6-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>