OSDN Git Service
Andy Shevchenko [Thu, 4 Feb 2021 15:05:08 +0000 (17:05 +0200)]
platform/x86: intel_scu_wdt: Drop mistakenly added const
Neither original structure nor platform_data is declared with const.
Drop mistakenly added const when assing platform_data.
Fixes:
a507e5d90f3d ("platform/x86: intel_scu_wdt: Get rid of custom x86 model comparison")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210204150508.62659-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Barnabás Pőcze [Thu, 4 Feb 2021 14:20:15 +0000 (14:20 +0000)]
platform/x86: Kconfig: add missing selects for ideapad-laptop
LED class support is needed by the ideapad-laptop module to compile after
the referenced commit. Add missing NEW_LEDS and LEDS_CLASS to Kconfig.
Fixes:
503325f84bc0 ("platform/x86: ideapad-laptop: add keyboard backlight control support")
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210204142010.356675-1-pobrn@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Thu, 4 Feb 2021 14:02:05 +0000 (15:02 +0100)]
platform/x86: acer-wmi: Don't use ACPI_EXCEPTION()
ACPI_EXCEPTION is only intended for internal use by the ACPICA code.
ACPI_EXCEPTION was being used here to change the apci_status code into
something human-readable, use acpi_format_exception() for this instead,
which is the proper way to do this outside of ACPICA.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210204140205.268344-1-hdegoede@redhat.com
Hans de Goede [Thu, 4 Feb 2021 14:01:58 +0000 (15:01 +0100)]
platform/x86: thinkpad_acpi: Replace ifdef CONFIG_ACPI_PLATFORM_PROFILE with depends on
With the #if IS_ENABLED(CONFIG_ACPI_PLATFORM_PROFILE), we get the following
errors when thinkpad_acpi is builtin while CONFIG_ACPI_PLATFORM_PROFILE=m :
drivers/platform/x86/thinkpad_acpi.c:10186: undefined reference to `platform_profile_notify'
drivers/platform/x86/thinkpad_acpi.c:10226: undefined reference to `platform_profile_register'
drivers/platform/x86/thinkpad_acpi.c:10246: undefined reference to `platform_profile_remove'
This could be fixed by changing the IS_ENABLED to IS_REACHABLE, but
I believe that it is better to just switch to using depends on.
Using depends on ensures that platform-profile support is always
available when thinkpad_acpi is build, hopefully leading to less
confusing bug-reports about it sometimes not working.
Cc: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210204140158.268289-2-hdegoede@redhat.com
Hans de Goede [Thu, 4 Feb 2021 14:01:57 +0000 (15:01 +0100)]
platform/x86: thinkpad_acpi: Fix 'warning: no previous prototype for' warnings
Some of the new dytc handling functions are not marked static, even though
they are only used internally.
Mark these static, fixing the following compiler warnings:
drivers/platform/x86/thinkpad_acpi.c:10081:5: warning: no previous prototype for 'dytc_profile_get' [-Wmissing-prototypes]
drivers/platform/x86/thinkpad_acpi.c:10095:5: warning: no previous prototype for 'dytc_cql_command' [-Wmissing-prototypes]
drivers/platform/x86/thinkpad_acpi.c:10133:5: warning: no previous prototype for 'dytc_profile_set' [-Wmissing-prototypes]
Cc: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210204140158.268289-1-hdegoede@redhat.com
Hans de Goede [Thu, 4 Feb 2021 12:19:31 +0000 (13:19 +0100)]
platform/x86: msi-wmi: Fix variable 'status' set but not used compiler warning
Explicitly check the status rather then relying on output.pointer staying
NULL on an error.
Reported-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210204121931.131617-1-hdegoede@redhat.com
Hans de Goede [Thu, 4 Feb 2021 11:38:48 +0000 (12:38 +0100)]
platform/surface: surface3-wmi: Fix variable 'status' set but not used compiler warning
Explicitly check the status rather then relying on output.pointer staying
NULL on an error. This silences the following compiler warning:
drivers/platform/surface/surface3-wmi.c:60:14: warning: variable 'status' set but not used [-Wunused-but-set-variable]
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210204113848.105994-1-hdegoede@redhat.com
Mario Limonciello [Wed, 3 Feb 2021 19:58:32 +0000 (13:58 -0600)]
platform/x86: Move all dell drivers to their own subdirectory
A user without a Dell system doesn't need to pick any of these
drivers.
Users with a Dell system can enable this submenu and all drivers
behind it will be enabled.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Link: https://lore.kernel.org/r/20210203195832.2950605-1-mario.limonciello@dell.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Barnabás Pőcze [Wed, 3 Feb 2021 21:57:26 +0000 (21:57 +0000)]
Documentation/ABI: sysfs-platform-ideapad-laptop: conservation_mode attribute
Document the conservation_mode attributes provided by the ideapad-laptop module.
Fixes:
ade50296186a ("platform/x86: ideapad-laptop: Expose conservation mode switch")
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-30-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Barnabás Pőcze [Wed, 3 Feb 2021 21:57:19 +0000 (21:57 +0000)]
Documentation/ABI: sysfs-platform-ideapad-laptop: update device attribute paths
The documentation referred to non-existent device
attributes under a non-existent platform device.
Update it with the current location of the attributes.
Fixes:
b5c37b798f2d ("ideapad_laptop: convert ideapad device/driver to platform bus")
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-29-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Barnabás Pőcze [Wed, 3 Feb 2021 21:57:13 +0000 (21:57 +0000)]
platform/x86: ideapad-laptop: add "always on USB charging" control support
Certain models have a so-called "always on USB charging" feature,
which enables USB charging even when the computer is turned off
or suspended, and which may be controlled/queried using the
SALS/HALS ACPI methods. Expose this functionality via a new device
attribute (usb_charging). Tested on: Lenovo YOGA 520-14IKB 80X8
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-28-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Barnabás Pőcze [Wed, 3 Feb 2021 21:57:07 +0000 (21:57 +0000)]
platform/x86: ideapad-laptop: add keyboard backlight control support
On certain models it is possible to control/query the
keyboard backlight via the SALS/HALS ACPI methods. Add
support for that, and register an LED class device to expose
this functionality. Tested on: Lenovo YOGA 520-14IKB 80X8
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-27-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Barnabás Pőcze [Wed, 3 Feb 2021 21:57:01 +0000 (21:57 +0000)]
platform/x86: ideapad-laptop: send notification about touchpad state change to sysfs
Consumers can determine if the value of an attribute changed much more
easily if changes are broadcast using sysfs_notify(), so utilize it.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-26-pobrn@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Barnabás Pőcze [Wed, 3 Feb 2021 21:56:56 +0000 (21:56 +0000)]
platform/x86: ideapad-laptop: fix checkpatch warnings, more consistent style
Fix all checkpatch warnings. Reorder variable definitions from
longest to shortest. Add more whitespaces for better readability.
Rename variables named `ret` to `err` where appropriate. Reorder
sysfs attributes show/store callbacks and the `ideapad_attributes`
array in lexicographic order. And other minor formatting changes.
No significant functional changes are intended.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-25-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Barnabás Pőcze [Wed, 3 Feb 2021 21:56:44 +0000 (21:56 +0000)]
Revert "platform/x86: ideapad-laptop: Switch touchpad attribute to be RO"
The touchpad can be enabled/disabled via this attribute on a Lenovo
Yoga 520-14IKB. Allow writing as it provides legitimate functionality.
This reverts commit
7f363145992cebf4ea760447f1cfdf6f81459683.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-24-pobrn@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Barnabás Pőcze [Wed, 3 Feb 2021 21:56:39 +0000 (21:56 +0000)]
platform/x86: ideapad-laptop: change 'cfg' debugfs file format
Minor formatting changes. Use seq_puts() where possible.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-23-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Barnabás Pőcze [Wed, 3 Feb 2021 21:56:34 +0000 (21:56 +0000)]
platform/x86: ideapad-laptop: change 'status' debugfs file format
Remove conservation mode reporting since it is already reported via
the appropriate device attribute, and its state can be deduced from
the value of GBMD. Add the return value of the GBMD and HALS ACPI
methods to the output. Use seq_puts() where possible.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-22-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Barnabás Pőcze [Wed, 3 Feb 2021 21:56:22 +0000 (21:56 +0000)]
platform/x86: ideapad-laptop: check for touchpad support in _CFG
Bit 30 of _CFG is set if the device has a touchpad, check that
in is_visible() for the touchpad attribute. Show 'touchpad', if
supported, in the list of capabilities in the 'cfg' debugfs file.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-21-pobrn@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Barnabás Pőcze [Wed, 3 Feb 2021 21:56:16 +0000 (21:56 +0000)]
platform/x86: ideapad-laptop: check for Fn-lock support in HALS
Bit 9 in the return value of the HALS ACPI method is set if
Fn-lock is supported. Change ideapad_check_features() to check it.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-20-pobrn@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Barnabás Pőcze [Wed, 3 Feb 2021 21:56:10 +0000 (21:56 +0000)]
platform/x86: ideapad-laptop: rework is_visible() logic
Store the supported features in the driver private
data, and modify the is_visible() callback to use it,
and create ideapad_check_features() to populate it.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-19-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Barnabás Pőcze [Wed, 3 Feb 2021 21:56:05 +0000 (21:56 +0000)]
platform/x86: ideapad-laptop: rework and create new ACPI helpers
Create dedicated helper functions for accessing the main ACPI methods:
GBMD, SMBC, HALS, SALS; and utilize them. Use `unsigned long` consistently
in every ACPI helper wherever possible. Change names to better express
purpose. Do not assign values to output parameters in case of failure.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-18-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Barnabás Pőcze [Wed, 3 Feb 2021 21:55:59 +0000 (21:55 +0000)]
platform/x86: ideapad-laptop: group and separate (un)related constants into enums
Group and rename constants depending on which ACPI interface
they pertain to, and rename CFG_X constants to CFG_CAP_X.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-17-pobrn@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Barnabás Pőcze [Wed, 3 Feb 2021 21:55:53 +0000 (21:55 +0000)]
platform/x86: ideapad-laptop: misc. device attribute changes
Do not handle zero length buffer separately. Use kstrtouint() instead
of sscanf(). Use kstrtobool() in store_ideapad_cam(). These
introduce minor ABI changes, but it is expected that no users rely
on the previous behavior. Thus the change is deemed justifed.
Additionally, use `!!` to convert to `int` and use the "%d" format
specifier in sysfs_emit() for boolean-like attributes.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-16-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Barnabás Pőcze [Wed, 3 Feb 2021 21:55:48 +0000 (21:55 +0000)]
platform/x86: ideapad-laptop: always propagate error codes from device attributes' show() callback
Consumers can differentiate an error from a successful read much more
easily if the read() call fails with an appropriate errno instead of
returning a magic string like "-1". This introduces an ABI change, but
not many users are expected to be relying on the previous behavior,
and this change makes this module conforming to the standard behavior
that sysfs attribute show/store callbacks return an appropriate
errno in case of failure. Thus the ABI breakage is deemed justified.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-15-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Barnabás Pőcze [Wed, 3 Feb 2021 21:55:43 +0000 (21:55 +0000)]
platform/x86: ideapad-laptop: convert ACPI helpers to return -EIO in case of failure
ACPI helpers returned -1 in case of failure. Convert these
functions to return appropriate error codes, and convert
their users to propagate these error codes accordingly.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-14-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Barnabás Pőcze [Wed, 3 Feb 2021 21:55:32 +0000 (21:55 +0000)]
platform/x86: ideapad-laptop: use dev_{err,warn} or appropriate variant to display log messages
Having the device name in the log message makes it easier to determine
in the context of which device the message was printed, so utilize the
appropriate variants of dev_{err,warn,...} when printing log messages.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-12-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Barnabás Pőcze [Wed, 3 Feb 2021 21:55:27 +0000 (21:55 +0000)]
platform/x86: ideapad-laptop: use msecs_to_jiffies() helper instead of hand-crafted formula
The current code used a hand-crafted formula to convert milliseconds to
jiffies, replace it with the msecs_to_jiffies() function. Furthermore,
use a while loop instead of for loop for shorter lines and simplicity.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-11-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Barnabás Pőcze [Wed, 3 Feb 2021 21:55:21 +0000 (21:55 +0000)]
platform/x86: ideapad-laptop: use for_each_set_bit() helper to simplify event processing
The current code used the combination of a for loop + test_bit,
which can be simplified using for_each_set_bit(), so utilize that.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-10-pobrn@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Barnabás Pőcze [Wed, 3 Feb 2021 21:55:15 +0000 (21:55 +0000)]
platform/x86: ideapad-laptop: use kobj_to_dev()
Use kobj_to_dev() instead of open-coding the container_of() macro.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-9-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Barnabás Pőcze [Wed, 3 Feb 2021 21:55:05 +0000 (21:55 +0000)]
platform/x86: ideapad-laptop: use device_{add,remove}_group
Use device_{add,remove}_group instead of sysfs_{add,remove}_group.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-8-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Barnabás Pőcze [Wed, 3 Feb 2021 21:54:56 +0000 (21:54 +0000)]
platform/x86: ideapad-laptop: use sysfs_emit()
sysfs_emit() has been introduced to make it less ambiguous
which function is preferred when writing to the output
buffer in a device attribute's show() callback. Convert the
ideapad-laptop module to utilize this new helper function.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-7-pobrn@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Barnabás Pőcze [Wed, 3 Feb 2021 21:54:43 +0000 (21:54 +0000)]
platform/x86: ideapad-laptop: add missing call to submodule destructor
ideapad_dytc_profile_exit() is not called in ideapad_acpi_add()
in the error path. Add the missing call.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-6-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Barnabás Pőcze [Wed, 3 Feb 2021 21:54:36 +0000 (21:54 +0000)]
platform/x86: ideapad-laptop: sort includes lexicographically
Managing includes is easier when they are
sorted, so sort them lexicographically.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-5-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Barnabás Pőcze [Wed, 3 Feb 2021 21:54:30 +0000 (21:54 +0000)]
platform/x86: ideapad-laptop: use appropriately typed variable to store the return value of ACPI methods
Use a variable with type `acpi_status` to store the return value of
ACPI methods instead of a plain `int`. And use ACPI_{SUCCESS,FAILURE}
macros where possible instead of direct comparison.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-4-pobrn@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Barnabás Pőcze [Wed, 3 Feb 2021 21:54:23 +0000 (21:54 +0000)]
platform/x86: ideapad-laptop: remove unnecessary NULL checks
The checks that are removed test pointers which should not
be NULL. If they are NULL, that indicates a bug in
a different part of the kernel. Instead of silently
bailing out, let it fail loudly.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-3-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Barnabás Pőcze [Wed, 3 Feb 2021 21:54:16 +0000 (21:54 +0000)]
platform/x86: ideapad-laptop: remove unnecessary dev_set_drvdata() call
The driver core already sets the driver specific data on
bind failure or removal. Thus the call is unnecessary.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-2-pobrn@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Artem Bityutskiy [Wed, 3 Feb 2021 11:43:20 +0000 (13:43 +0200)]
platform/x86/intel-uncore-freq: Add Sapphire Rapids server support
Sapphire Rapids uncore frequency control is the same as Skylake and
Ice Lake. Add the Sapphire Rapids CPU model number to the match array.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20210203114320.1398801-1-dedekind1@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Thu, 28 Jan 2021 11:36:53 +0000 (12:36 +0100)]
platform/x86: touchscreen_dmi: Add info for the Jumper EZpad 7 tablet
Add touchscreen info for the Jumper EZpad 7 tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210128113653.5442-1-hdegoede@redhat.com
David E. Box [Tue, 26 Jan 2021 20:55:08 +0000 (12:55 -0800)]
platform/x86: intel_pmt_crashlog: Add dependency on MFD_INTEL_PMT
All devices that expose Intel Platform Monitoring Technology (PMT)
crashlog are currently owned by the intel_pmt MFD driver. Therefore make
the crashlog driver depend on the MFD driver for build.
Fixes:
5ef9998c96b0 ("platform/x86: Intel PMT Crashlog capability driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20210126205508.30907-3-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
David E. Box [Tue, 26 Jan 2021 20:55:07 +0000 (12:55 -0800)]
platform/x86: intel_pmt_telemetry: Add dependency on MFD_INTEL_PMT
All devices that expose Intel Platform Monitoring Technology (PMT)
telemetry are currently owned by the intel_pmt MFD driver. Therefore make
the telemetry driver depend on the MFD driver for build.
Fixes:
68fe8e6e2c4b ("platform/x86: Intel PMT Telemetry capability driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20210126205508.30907-2-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
David E. Box [Tue, 26 Jan 2021 20:55:06 +0000 (12:55 -0800)]
platform/x86: intel_pmt: Make INTEL_PMT_CLASS non-user-selectable
Fix error in Kconfig that exposed INTEL_PMT_CLASS as a user selectable
option. It is already selected by INTEL_PMT_TELEMETRY and
INTEL_PMT_CRASHLOG which are user selectable.
Fixes:
e2729113ce66 ("platform/x86: Intel PMT class driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20210126205508.30907-1-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Maximilian Luz [Tue, 26 Jan 2021 17:22:02 +0000 (18:22 +0100)]
platform/surface: aggregator: Fix braces in if condition with unlikely() macro
The braces of the unlikely() macro inside the if condition only cover
the subtraction part, not the whole statement. This causes the result of
the subtraction to be converted to zero or one. While that still works
in this context, it causes static analysis tools to complain (and is
just plain wrong).
Fix the bracket placement and, while at it, simplify the if-condition.
Also add a comment to the if-condition explaining what we expect the
result to be and what happens on the failure path, as it seems to have
caused a bit of confusion.
This commit should not cause any difference in behavior or generated
code.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes:
c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210126172202.1428367-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Wed, 3 Feb 2021 10:25:28 +0000 (11:25 +0100)]
Merge tag 'ib-drm-gpio-pdx86-rtc-wdt-v5.12-1' into for-next
ib-drm-gpio-pdx86-rtc-wdt for v5.12-1
First part of Intel MID outdated platforms removal.
The following is an automated git shortlog grouped by driver:
drm/gma500:
- Get rid of duplicate NULL checks
- Convert to use new SCU IPC API
gpio:
- msic: Remove driver for deprecated platform
- intel-mid: Remove driver for deprecated platform
intel_mid_powerbtn:
- Remove driver for deprecated platform
intel_mid_thermal:
- Remove driver for deprecated platform
intel_scu_wdt:
- Get rid of custom x86 model comparison
- Drop SCU notification
- Move driver from arch/x86
rtc:
- mrst: Remove driver for deprecated platform
watchdog:
- intel-mid_wdt: Postpone IRQ handler registration till SCU is ready
- intel_scu_watchdog: Remove driver for deprecated platform
Lubomir Rintel [Tue, 26 Jan 2021 07:37:40 +0000 (08:37 +0100)]
Platform: OLPC: Specify the enable time
Determined empirically.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210126073740.10232-4-lkundrak@v3.sk
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Lubomir Rintel [Tue, 26 Jan 2021 07:37:39 +0000 (08:37 +0100)]
Platform: OLPC: Remove dcon_rdev from olpc_ec_priv
It is not needed. Use a local variable instead.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210126073740.10232-3-lkundrak@v3.sk
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Lubomir Rintel [Tue, 26 Jan 2021 07:37:38 +0000 (08:37 +0100)]
Platform: OLPC: Fix probe error handling
Reset ec_priv if probe ends unsuccessfully.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210126073740.10232-2-lkundrak@v3.sk
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Pan Bian [Thu, 21 Jan 2021 04:50:05 +0000 (20:50 -0800)]
platform/x86: amd-pmc: put device on error paths
Put the PCI device rdev on error paths to fix potential reference count
leaks.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210121045005.73342-1-bianpan2016@163.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Jiaxun Yang [Tue, 5 Jan 2021 13:14:43 +0000 (21:14 +0800)]
platform/x86: ideapad-laptop: DYTC Platform profile support
Add support to ideapad-laptop for Lenovo platforms that have DYTC
version 5 support or newer to use the platform profile feature.
Mostly based on Mark Pearson <markpearson@lenovo.com>'s thinkpad-acpi
work but massaged to fit ideapad driver.
Note that different from ThinkPads, IdeaPads's Thermal Hotkey won't
trigger profile switch itself, we'll leave it for userspace programs.
Tested on Lenovo Yoga-14S ARE Chinese Edition.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210105131447.38036-3-jiaxun.yang@flygoat.com
[hdegoede@redhat.com s/QUIET/LOW_POWER/]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Mark Pearson [Mon, 11 Jan 2021 16:22:37 +0000 (11:22 -0500)]
platform/x86: thinkpad_acpi: Add platform profile support
Add support to thinkpad_acpi for Lenovo platforms that have DYTC
version 5 support or newer to use the platform profile feature.
This will allow users to determine and control the platform modes
between low-power, balanced operation and performance modes.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210111162237.3469-1-markpearson@lenovo.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Tue, 2 Feb 2021 14:38:10 +0000 (15:38 +0100)]
Merge remote-tracking branch 'linux-pm/acpi-platform' into review-hans
Nitin Joshi [Tue, 2 Feb 2021 00:32:10 +0000 (09:32 +0900)]
platform/x86: thinkpad_acpi: fixed warning and incorporated review comments
The previous commit adding new sysfs for keyboard language has warning and
few code correction has to be done as per new review comments.
Below changes has been addressed in this version:
- corrected warning. Many thanks to kernel test robot <lkp@intel.com> for
reporting and determining this warning.
- used sysfs_emit_at() API instead of strcat.
- sorted keyboard language array.
- removed unwanted space and corrected sentences.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nitin Joshi <njoshi1@lenovo.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210202003210.91773-1-njoshi1@lenovo.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Lukas Bulwahn [Fri, 29 Jan 2021 04:08:49 +0000 (05:08 +0100)]
platform/x86: thinkpad_acpi: rectify length of title underline
Commit
d7cbe2773aed ("platform/x86: thinkpad_acpi: set keyboard language")
adds information on keyboard setting to the thinkpad documentation, but
made the subsection title underline too short.
Hence, make htmldocs warns:
Documentation/admin-guide/laptops/thinkpad-acpi.rst:1472: \
WARNING: Title underline too short.
Rectify length of subsection title underline.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20210129040849.26740-1-lukas.bulwahn@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Mon, 25 Jan 2021 20:52:58 +0000 (21:52 +0100)]
platform/x86: thinkpad_acpi: Don't register keyboard_lang unnecessarily
All recent ThinkPad BIOS-es support the GSKL method used to query the
keyboard-layout used by the ECFW for the SHIFT + other-key key-press
emulation for special keys such as e.g. the '=', '(' and ')' keys
above the numpad on 15" models.
So just checking for the method is not a good indicator of the
model supporting getting/setting the keyboard_lang.
On models where this is not supported GSKL succeeds, but it returns
METHOD_ERR in the returned integer to indicate that this is not
supported on this model.
Add a check for METHOD_ERR and return -ENODEV if it is set to
avoid registering a non-working keyboard_lang sysfs-attr on models
where this is not supported.
Cc: Nitin Joshi <njoshi1@lenovo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210125205258.135664-1-hdegoede@redhat.com
Mario Limonciello [Fri, 29 Jan 2021 17:26:54 +0000 (11:26 -0600)]
platform/x86: dell-wmi-sysman: fix a NULL pointer dereference
An upcoming Dell platform is causing a NULL pointer dereference
in dell-wmi-sysman initialization. Validate that the input from
BIOS matches correct ACPI types and abort module initialization
if it fails.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Tested-by: Perry Yuan <perry_yuan@dell.com>
Link: https://lore.kernel.org/r/20210129172654.2326751-1-mario.limonciello@dell.com
[hdegoede@redhat.com: Drop redundant release_attributes_data() call]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Mon, 25 Jan 2021 19:09:09 +0000 (20:09 +0100)]
ACPI: platform-profile: Fix possible deadlock in platform_profile_remove()
After a rmmod thinkpad_acpi, lockdep pointed out this possible deadlock:
Our _show and _store sysfs attr functions get called with the kn->active
lock held for the sysfs attr and then take the profile_lock.
sysfs_remove_group() also takes the kn->active lock for the sysfs attr,
so if we call it with the profile_lock held, then we get an ABBA deadlock.
platform_profile_remove() must only be called by drivers which have
first *successfully* called platform_profile_register(). Anything else
is a driver bug. So the check for cur_profile being set before calling
sysfs_remove_group() is not necessary and it can be dropped.
It is safe to call sysfs_remove_group() without holding the profile_lock
since the attr-group group cannot be re-added until after we clear
cur_profile.
Change platform_profile_remove() to only hold the profile_lock while
clearing the cur_profile, fixing the deadlock.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Jiaxun Yang [Mon, 25 Jan 2021 11:59:57 +0000 (12:59 +0100)]
ACPI: platform-profile: Introduce object pointers to callbacks
Add an object pointer to handler callbacks to avoid the need for
drivers to have a global variable to get to their driver-data
struct.
Link: https://lore.kernel.org/linux-acpi/6a29f338-d9e4-150c-81dd-2ffb54f5bc35@redhat.com/
Link: https://lore.kernel.org/r/20210114073429.176462-3-jiaxun.yang@flygoat.com
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Nitin Joshi [Mon, 25 Jan 2021 02:59:16 +0000 (11:59 +0900)]
platform/x86: thinkpad_acpi: set keyboard language
This patch is to create sysfs entry for setting keyboard language
using ASL method. Some thinkpads models like T580 , T590 , T15 Gen 1
etc. has "=", "(',")" numeric keys, which are not displaying correctly,
when keyboard language is other than "english".
This patch fixes this issue by setting keyboard language to ECFW.
Signed-off-by: Nitin Joshi <njoshi1@lenovo.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210125025916.180831-1-nitjoshi@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Andy Shevchenko [Fri, 22 Jan 2021 11:41:45 +0000 (13:41 +0200)]
platform/x86: intel_mid_powerbtn: Remove driver for deprecated platform
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run a more or less fresh kernel on it.
Commit
05f4434bc130 ("ASoC: Intel: remove mfld_machine") which has
been upstream for a while now confirms this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210122114145.38813-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Andy Shevchenko [Fri, 22 Jan 2021 11:42:27 +0000 (13:42 +0200)]
platform/x86: intel_mid_thermal: Remove driver for deprecated platform
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run a more or less fresh kernel on it.
Commit
05f4434bc130 ("ASoC: Intel: remove mfld_machine") which has
been upstream for a while now confirms this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210122114227.39102-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Wed, 20 Jan 2021 12:49:41 +0000 (13:49 +0100)]
platform/x86: hp-wmi: Disable tablet-mode reporting by default
Recently userspace has started making more use of SW_TABLET_MODE
(when an input-dev reports this).
Specifically recent GNOME3 versions will:
1. When SW_TABLET_MODE is reported and is reporting 0:
1.1 Disable accelerometer-based screen auto-rotation
1.2 Disable automatically showing the on-screen keyboard when a
text-input field is focussed
2. When SW_TABLET_MODE is reported and is reporting 1:
2.1 Ignore input-events from the builtin keyboard and touchpad
(this is for 360° hinges style 2-in-1s where the keyboard and
touchpads are accessible on the back of the tablet when folded
into tablet-mode)
This means that claiming to support SW_TABLET_MODE when it does not
actually work / reports correct values has bad side-effects.
The check in the hp-wmi code which is used to decide if the input-dev
should claim SW_TABLET_MODE support, only checks if the
HPWMI_HARDWARE_QUERY is supported. It does *not* check if the hardware
actually is capable of reporting SW_TABLET_MODE.
This leads to the hp-wmi input-dev claiming SW_TABLET_MODE support,
while in reality it will always report 0 as SW_TABLET_MODE value.
This has been seen on a "HP ENVY x360 Convertible 15-cp0xxx" and
this likely is the case on a whole lot of other HP models.
This problem causes both auto-rotation and on-screen keyboard
support to not work on affected x360 models.
There is no easy fix for this, but since userspace expects
SW_TABLET_MODE reporting to be reliable when advertised it is
better to not claim/report SW_TABLET_MODE support at all, then
to claim to support it while it does not work.
To avoid the mentioned problems, add a new enable_tablet_mode_sw
module-parameter which defaults to false.
Note I've made this an int using the standard -1=auto, 0=off, 1=on
triplett, with the hope that in the future we can come up with a
better way to detect SW_TABLET_MODE support. ATM the default
auto option just does the same as off.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1918255
Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mark Gross <mgross@linux.intel.com>
Link: https://lore.kernel.org/r/20210120124941.73409-1-hdegoede@redhat.com
Hans de Goede [Fri, 15 Jan 2021 16:18:50 +0000 (17:18 +0100)]
platform/x86: intel-vbtn: Eval VBDL after registering our notifier
The VBDL ACPI method enables button/switch reporting through the
intel-vbtn device. In some cases the embedded-controller (EC) might
call Notify() on the intel-vbtn device immediately after the
the VBDL call to make sure that the OS is synced with the EC's
button and switch state.
If we register our notify_handler after evaluating VBDL this means
that we might miss the Notify() calls made by the EC to sync the
state.
E.g. the HP Stream x360 Convertible PC 11 has a VGBS method which
always returns 0, independent of the actual SW_TABLET_MODE state
of the device; and immediately after the VBDL call it calls
Notify(0xCD) or Notify(0xCC) to report the actual state.
Move the evaluation of VBDL to after registering our notify_handler
so that we don't miss any events.
Cc: Elia Devito <eliadevito@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210115161850.117614-4-hdegoede@redhat.com
Hans de Goede [Fri, 15 Jan 2021 16:18:49 +0000 (17:18 +0100)]
platform/x86: intel-vbtn: Add alternative method to enable switches
Some 2-in-1s have a broken VGBS method, so we cannot get an initial
state for the switches from them. Reporting the wrong initial state for
SW_TABLET_MODE causes serious problems (touchpad and/or keyboard events
being ignored by userspace when reporting SW_TABLET_MODE=1), so on these
devices we cannot register an input-dev for the switches at probe time.
We can however register an input-dev for the switches as soon as we
receive the first switches event, because then we will know the state.
Note this mirrors the behavior of recent changs to the intel-hid driver
which also registers a separate switches input-dev on receiving the
first event on machines with a broken VGBS method.
Cc: Elia Devito <eliadevito@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210115161850.117614-3-hdegoede@redhat.com
Hans de Goede [Fri, 15 Jan 2021 16:18:48 +0000 (17:18 +0100)]
platform/x86: intel-vbtn: Create 2 separate input-devs for buttons and switches
Create 2 separate input-devs for buttons and switches, this is a
preparation for dynamically registering the switches-input device
for devices which are not on the switches allow-list, but do make
Notify() calls with an event value from the switches sparse-keymap.
This also brings the intel-vbtn driver inline with the intel-hid
driver which is doing the same thing.
Cc: Elia Devito <eliadevito@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210115161850.117614-2-hdegoede@redhat.com
Hans de Goede [Fri, 15 Jan 2021 16:18:47 +0000 (17:18 +0100)]
platform/x86: intel-vbtn: Rework wakeup handling in notify_handler()
Rework the wakeup path inside notify_handler() to special case the
buttons (KE_KEY) case instead of the switches case.
In case of a button wake event we want to skip reporting this,
mirroring how the drivers/acpi/button.c code skips the reporting
in the wakeup case (suspended flag set) too.
The reason to skip reporting in this case is that some Linux
desktop-environments will immediately resuspend if we report an
evdev event for the power-button press on wakeup.
Before this commit the skipping of the button-press was done
in a round-about way: In case of a wakeup the regular
sparse_keymap_report_event() would always be skipped by
an early return, and then to avoid not reporting switch changes
on wakeup there was a special KE_SW path with a duplicate
sparse_keymap_report_event() call.
This commit refactors the wakeup handling to explicitly skip the
reporting for button wake events, while using the regular
reporting path for non button (switches) wakeup events.
No intentional functional impact.
Cc: Elia Devito <eliadevito@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210115161850.117614-1-hdegoede@redhat.com
Andy Shevchenko [Mon, 2 Jul 2018 17:45:36 +0000 (20:45 +0300)]
platform/x86: intel_scu_wdt: Get rid of custom x86 model comparison
Switch the platform code to use x86_id_table and accompanying API
instead of custom comparison against x86 CPU model.
This is one of the last users of custom API for that and following
changes will remove it for the good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Andy Shevchenko [Fri, 23 Oct 2020 16:14:15 +0000 (19:14 +0300)]
platform/x86: intel_scu_wdt: Drop SCU notification
Since SCU code along with the Intel MID watchdog driver has been refactored
in a way that latter will be probed only after the former has been come
to live, the notification code is bogus and not needed. Remove it for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Andy Shevchenko [Fri, 23 Oct 2020 16:03:19 +0000 (19:03 +0300)]
platform/x86: intel_scu_wdt: Move driver from arch/x86
The ACPI-enabled Intel MID platforms neither have WDAT table nor proper IDs
to instantiate watchdog device. In order to keep them working move the board
code from arch/x86 to drivers/platform/x86.
Note, the complete SFI support is going to be removed, that's why PDx86
has been chosen as a new home for it. This is the only device which needs
additional code so far.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Andy Shevchenko [Fri, 23 Oct 2020 16:33:02 +0000 (19:33 +0300)]
watchdog: intel-mid_wdt: Postpone IRQ handler registration till SCU is ready
When SCU is not ready and CONFIG_DEBUG_SHIRQ=y we got deferred probe followed
by fired test IRQ which immediately makes kernel panic. Fix this by delaying
IRQ handler registration till SCU is ready.
Fixes:
80ae679b8f86 ("watchdog: intel-mid_wdt: Convert to use new SCU IPC API")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Andy Shevchenko [Fri, 22 Nov 2019 14:57:30 +0000 (16:57 +0200)]
watchdog: intel_scu_watchdog: Remove driver for deprecated platform
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc130 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Andy Shevchenko [Wed, 18 Nov 2020 10:46:44 +0000 (12:46 +0200)]
rtc: mrst: Remove driver for deprecated platform
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc130 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Andy Shevchenko [Tue, 28 Jul 2020 13:42:10 +0000 (16:42 +0300)]
platform/x86: intel_mid_powerbtn: Remove driver for deprecated platform
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc130 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Andy Shevchenko [Mon, 17 Aug 2020 09:47:11 +0000 (12:47 +0300)]
platform/x86: intel_mid_thermal: Remove driver for deprecated platform
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc130 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Andy Shevchenko [Fri, 22 Nov 2019 14:57:30 +0000 (16:57 +0200)]
gpio: msic: Remove driver for deprecated platform
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc130 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Andy Shevchenko [Fri, 22 Nov 2019 14:57:30 +0000 (16:57 +0200)]
gpio: intel-mid: Remove driver for deprecated platform
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc130 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Moreover this code duplicates gpio-pxa since the IP has been derived
from XScale implementation. If anybody wants to resurrect this
it has to be part of gpio-pxa.c.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Andy Shevchenko [Fri, 23 Oct 2020 18:54:00 +0000 (21:54 +0300)]
drm/gma500: Get rid of duplicate NULL checks
Since GPIOs are optional we don't need to repeat checks that are done
in the GPIO API. Remove them for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Andy Shevchenko [Fri, 23 Oct 2020 17:53:21 +0000 (20:53 +0300)]
drm/gma500: Convert to use new SCU IPC API
Convert the GMA500 driver to use the new SCU IPC API. This allows us
to get rid of the duplicate PMC IPC implementation which is now covered
in SCU IPC driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Jiaxun Yang [Mon, 25 Jan 2021 11:59:56 +0000 (12:59 +0100)]
ACPI: platform-profile: Drop const qualifier for cur_profile
Drop the const qualifier from the static global cur_profile
pointer declaration.
This is a preparation patch for passing the cur_profile pointer as
parameter to the profile_get() and profile_set() callbacks so that
drivers dynamically allocating their driver-data struct, with their
platform_profile_handler struct embedded, can use this pointer to
get to their driver-data.
Note this also requires dropping the const from the pprof
platform_profile_register() function argument. Dropping this
const is not a problem, non of the queued up consumers of
platform_profile_register() actually pass in a const pointer.
Link: https://lore.kernel.org/linux-acpi/5e7a4d87-52ef-e487-9cc2-8e7094beaa08@redhat.com/
Link: https://lore.kernel.org/r/20210114073429.176462-2-jiaxun.yang@flygoat.com
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
[ hdegoede@redhat.com: Also remove const from platform_profile_register() ]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Yue Zou [Mon, 18 Jan 2021 01:01:37 +0000 (01:01 +0000)]
sony-laptop: Remove unneeded semicolon
Remove a superfluous semicolon after function definition.
Signed-off-by: Yue Zou <zouyue3@huawei.com>
Link: https://lore.kernel.org/r/20210118010137.214378-1-zouyue3@huawei.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Jeannie Stevenson [Fri, 15 Jan 2021 16:06:30 +0000 (16:06 +0000)]
platform/x86: thinkpad_acpi: Add P53/73 firmware to fan_quirk_table for dual fan control
This commit enables dual fan control for the new Lenovo P53 and P73
laptop models.
Signed-off-by: Jeannie Stevenson <jeanniestevenson@protonmail.com>
Link: https://lore.kernel.org/r/Pn_Xii4XYpQRFtgkf4PbNgieE89BAkHgLI1kWIq-zFudwh2A1DY5J_DJVHK06rMW_hGPHx_mPE33gd8mg9-8BxqJTaSC6hhPqAsfZlcNGH0=@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Henrique de Moraes Holschuh [Fri, 15 Jan 2021 18:47:21 +0000 (15:47 -0300)]
MAINTAINERS: update email address for Henrique de Moraes Holschuh
Update my email address in MAINTAINERS to the one I have been using for
commits, Signed-off-by and Acked-by tags. Only two ancient commits had
the old ibm-acpi@hmh.eng.br, so it is unlikely to justify a .mailmap
entry.
Note that ibm-acpi@hmh.eng.br does work as a way to contact me, but
apparently it is best when MAINTAINERS entries match commit email
addresses ;-)
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Link: https://lore.kernel.org/r/20210115184721.32546-1-hmh@hmh.eng.br
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Thu, 14 Jan 2021 23:27:44 +0000 (00:27 +0100)]
platform/x86: hp-wmi: Don't log a warning on HPWMI_RET_UNKNOWN_COMMAND errors
The recently added thermal policy support makes a
hp_wmi_perform_query(0x4c, ...) call on older devices which do not
support thermal policies this causes the following warning to be
logged (seen on a HP Stream x360 Convertible PC 11):
[ 26.805305] hp_wmi: query 0x4c returned error 0x3
Error 0x3 is HPWMI_RET_UNKNOWN_COMMAND error. This commit silences
the warning for unknown-command errors, silencing the new warning.
Cc: Elia Devito <eliadevito@gmail.com>
Fixes:
81c93798ef3e ("platform/x86: hp-wmi: add support for thermal policy")
Link: https://lore.kernel.org/r/20210114232744.154886-1-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Thu, 14 Jan 2021 14:34:32 +0000 (15:34 +0100)]
platform/x86: intel-vbtn: Drop HP Stream x360 Convertible PC 11 from allow-list
THe HP Stream x360 Convertible PC 11 DSDT has the following VGBS function:
Method (VGBS, 0, Serialized)
{
If ((^^PCI0.LPCB.EC0.ROLS == Zero))
{
VBDS = Zero
}
Else
{
VBDS = Zero
}
Return (VBDS) /* \_SB_.VGBI.VBDS */
}
Which is obviously wrong, because it always returns 0 independent of the
2-in-1 being in laptop or tablet mode. This causes the intel-vbtn driver
to initially report SW_TABLET_MODE = 1 to userspace, which is known to
cause problems when the 2-in-1 is actually in laptop mode.
During earlier testing this turned out to not be a problem because the
2-in-1 would do a Notify(..., 0xCC) or Notify(..., 0xCD) soon after
the intel-vbtn driver loaded, correcting the SW_TABLET_MODE state.
Further testing however has shown that this Notify() soon after the
intel-vbtn driver loads, does not always happen. When the Notify
does not happen, then intel-vbtn reports SW_TABLET_MODE = 1 resulting in
a non-working touchpad.
IOW the tablet-mode reporting is not reliable on this device, so it
should be dropped from the allow-list, fixing the touchpad sometimes
not working.
Fixes:
8169bd3e6e19 ("platform/x86: intel-vbtn: Switch to an allow-list for SW_TABLET_MODE reporting")
Link: https://lore.kernel.org/r/20210114143432.31750-1-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Maximilian Luz [Thu, 14 Jan 2021 15:08:26 +0000 (16:08 +0100)]
platform/surface: aggregator: Fix kernel-doc references
Both, ssh_rtl_rx_start() and ssh_rtl_tx_start() functions, do not exist
and have been consolidated into ssh_rtl_start(). Nevertheless,
kernel-doc references the former functions. Replace those references
with references to ssh_rtl_start().
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210114150826.19109-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Mauro Carvalho Chehab [Thu, 14 Jan 2021 08:04:52 +0000 (09:04 +0100)]
platform/surface: aggregator: fix a kernel-doc markup
A function has a different name between their prototype
and its kernel-doc markup:
../drivers/platform/surface/aggregator/ssh_request_layer.c:1065: warning: expecting prototype for ssh_rtl_tx_start(). Prototype was for ssh_rtl_start() instead
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/4a6bf33cfbd06654d78294127f2b6d354d073089.1610610937.git.mchehab+huawei@kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Maximilian Luz [Mon, 11 Jan 2021 15:48:51 +0000 (16:48 +0100)]
platform/surface: aggregator_cdev: Add comments regarding unchecked allocation size
CI static analysis complains about the allocation size in payload and
response buffers being unchecked. In general, these allocations should
be safe as the user-input is u16 and thus limited to U16_MAX, which is
only slightly larger than the theoretical maximum imposed by the
underlying SSH protocol.
All bounds on these values required by the underlying protocol are
enforced in ssam_request_sync() (or rather the functions called by it),
thus bounds here are only relevant for allocation.
Add comments explaining that this should be safe.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes:
178f6ab77e61 ("platform/surface: Add Surface Aggregator user-space interface")
Addresses-Coverity: ("Untrusted allocation size")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210111154851.325404-3-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Maximilian Luz [Mon, 11 Jan 2021 15:48:50 +0000 (16:48 +0100)]
platform/surface: aggregator_cdev: Fix access of uninitialized variables
When copy_struct_from_user() in ssam_cdev_request() fails, we directly
jump to the 'out' label. In this case, however 'spec' and 'rsp' are not
initialized, but we still access fields of those variables. Fix this by
initializing them at the time of their declaration.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes:
178f6ab77e61 ("platform/surface: Add Surface Aggregator user-space interface")
Addresses-Coverity: ("Uninitialized pointer read")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210111154851.325404-2-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Colin Ian King [Mon, 11 Jan 2021 14:46:48 +0000 (14:46 +0000)]
platform/surface: fix potential integer overflow on shift of a int
The left shift of int 32 bit integer constant 1 is evaluated using 32 bit
arithmetic and then passed as a 64 bit function argument. In the case where
func is 32 or more this can lead to an oveflow. Avoid this by shifting
using the BIT_ULL macro instead.
Addresses-Coverity: ("Unintentional integer overflow")
Fixes:
fc00bc8ac1da ("platform/surface: Add Surface ACPI Notify driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210111144648.20498-1-colin.king@canonical.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Jiaxun Yang [Thu, 7 Jan 2021 14:44:38 +0000 (22:44 +0800)]
platform/x86: ideapad-laptop: Disable touchpad_switch for ELAN0634
Newer ideapads (e.g.: Yoga 14s, 720S 14) come with ELAN0634 touchpad do not
use EC to switch touchpad.
Reading VPCCMD_R_TOUCHPAD will return zero thus touchpad may be blocked
unexpectedly.
Writing VPCCMD_W_TOUCHPAD may cause a spurious key press.
Add has_touchpad_switch to workaround these machines.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: stable@vger.kernel.org # 5.4+
--
v2: Specify touchpad to ELAN0634
v3: Stupid missing ! in v2
v4: Correct acpi_dev_present usage (Hans)
Link: https://lore.kernel.org/r/20210107144438.12605-1-jiaxun.yang@flygoat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Maximilian Luz [Mon, 21 Dec 2020 18:39:59 +0000 (19:39 +0100)]
platform/surface: Add Surface ACPI Notify driver
The Surface ACPI Notify (SAN) device provides an ACPI interface to the
Surface Aggregator EC, specifically the Surface Serial Hub interface.
This interface allows EC requests to be made from ACPI code and can
convert a subset of EC events back to ACPI notifications.
Specifically, this interface provides a GenericSerialBus operation
region ACPI code can execute a request by writing the request command
data and payload to this operation region and reading back the
corresponding response via a write-then-read operation. Furthermore,
this interface provides a _DSM method to be called when certain events
from the EC have been received, essentially turning them into ACPI
notifications.
The driver provided in this commit essentially takes care of translating
the request data written to the operation region, executing the request,
waiting for it to finish, and finally writing and translating back the
response (if the request has one). Furthermore, this driver takes care
of enabling the events handled via ACPI _DSM calls. Lastly, this driver
also exposes an interface providing discrete GPU (dGPU) power-on
notifications on the Surface Book 2, which are also received via the
operation region interface (but not handled by the SAN driver directly),
making them accessible to other drivers (such as a dGPU hot-plug driver
that may be added later on).
On 5th and 6th generation Surface devices (Surface Pro 5/2017, Pro 6,
Book 2, Laptop 1 and 2), the SAN interface provides full battery and
thermal subsystem access, as well as other EC based functionality. On
those models, battery and thermal sensor devices are implemented as
standard ACPI devices of that type, however, forward ACPI calls to the
corresponding Surface Aggregator EC request via the SAN interface and
receive corresponding notifications (e.g. battery information change)
from it. This interface is therefore required to provide said
functionality on those devices.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201221183959.1186143-10-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Maximilian Luz [Mon, 21 Dec 2020 18:39:58 +0000 (19:39 +0100)]
platform/surface: Add Surface Aggregator user-space interface
Add a misc-device providing user-space access to the Surface Aggregator
EC, mainly intended for debugging, testing, and reverse-engineering.
This interface gives user-space applications the ability to send
requests to the EC and receive the corresponding responses.
The device-file is managed by a pseudo platform-device and corresponding
driver to avoid dependence on the dedicated bus, allowing it to be
loaded in a minimal configuration.
A python library and scripts to access this device can be found at [1].
[1]: https://github.com/linux-surface/surface-aggregator-module/tree/master/scripts/ssam
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20201221183959.1186143-9-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Maximilian Luz [Mon, 21 Dec 2020 18:39:57 +0000 (19:39 +0100)]
docs: driver-api: Add Surface Aggregator subsystem documentation
Add documentation for the Surface Aggregator subsystem and its client
drivers, giving an overview of the subsystem, its use-cases, its
internal structure and internal API, as well as its external API for
writing client drivers.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201221183959.1186143-8-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Maximilian Luz [Mon, 21 Dec 2020 18:39:56 +0000 (19:39 +0100)]
platform/surface: aggregator: Add dedicated bus and device type
The Surface Aggregator EC provides varying functionality, depending on
the Surface device. To manage this functionality, we use dedicated
client devices for each subsystem or virtual device of the EC. While
some of these clients are described as standard devices in ACPI and the
corresponding client drivers can be implemented as platform drivers in
the kernel (making use of the controller API already present), many
devices, especially on newer Surface models, cannot be found there.
To simplify management of these devices, we introduce a new bus and
client device type for the Surface Aggregator subsystem. The new device
type takes care of managing the controller reference, essentially
guaranteeing its validity for as long as the client device exists, thus
alleviating the need to manually establish device links for that purpose
in the client driver (as has to be done with the platform devices).
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201221183959.1186143-7-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Maximilian Luz [Mon, 21 Dec 2020 18:39:55 +0000 (19:39 +0100)]
platform/surface: aggregator: Add error injection capabilities
This commit adds error injection hooks to the Surface Serial Hub
communication protocol implementation, to:
- simulate simple serial transmission errors,
- drop packets, requests, and responses, simulating communication
failures and potentially trigger retransmission timeouts, as well as
- inject invalid data into submitted and received packets.
Together with the trace points introduced in the previous commit, these
facilities are intended to aid in testing, validation, and debugging of
the Surface Aggregator communication layer.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20201221183959.1186143-6-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Maximilian Luz [Mon, 21 Dec 2020 18:39:54 +0000 (19:39 +0100)]
platform/surface: aggregator: Add trace points
Add trace points to the Surface Aggregator subsystem core. These trace
points can be used to track packets, requests, and allocations. They are
further intended for debugging and testing/validation, specifically in
combination with the error injection capabilities introduced in the
subsequent commit.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20201221183959.1186143-5-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Maximilian Luz [Mon, 21 Dec 2020 18:39:53 +0000 (19:39 +0100)]
platform/surface: aggregator: Add event item allocation caching
Event items are used for completing Surface Aggregator EC events, i.e.
placing event command data and payload on a workqueue for later
processing to avoid doing said processing directly on the receiver
thread. This means that event items are allocated for each incoming
event, regardless of that event being transmitted via sequenced or
unsequenced packets.
On the Surface Book 3 and Surface Laptop 3, touchpad HID input events
(unsequenced), can constitute a larger amount of traffic, and therefore
allocation of event items. This warrants caching event items to reduce
memory fragmentation. The size of the cached objects is specifically
tuned to accommodate keyboard and touchpad input events and their
payloads on those devices. As a result, this effectively also covers
most other event types. In case of a larger event payload, event item
allocation will fall back to kzalloc().
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201221183959.1186143-4-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Maximilian Luz [Mon, 21 Dec 2020 18:39:52 +0000 (19:39 +0100)]
platform/surface: aggregator: Add control packet allocation caching
Surface Serial Hub communication is, in its core, packet based. Each
sequenced packet requires to be acknowledged, via an ACK-type control
packet. In case invalid data has been received by the driver, a NAK-type
(not-acknowledge/negative acknowledge) control packet is sent,
triggering retransmission.
Control packets are therefore a core communication primitive and used
frequently enough (with every sequenced packet transmission sent by the
embedded controller, including events and request responses) that it may
warrant caching their allocations to reduce possible memory
fragmentation.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201221183959.1186143-3-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Maximilian Luz [Mon, 21 Dec 2020 18:39:51 +0000 (19:39 +0100)]
platform/surface: Add Surface Aggregator subsystem
Add Surface System Aggregator Module core and Surface Serial Hub driver,
required for the embedded controller found on Microsoft Surface devices.
The Surface System Aggregator Module (SSAM, SAM or Surface Aggregator)
is an embedded controller (EC) found on 4th and later generation
Microsoft Surface devices, with the exception of the Surface Go series.
This EC provides various functionality, depending on the device in
question. This can include battery status and thermal reporting (5th and
later generations), but also HID keyboard (6th+) and touchpad input
(7th+) on Surface Laptop and Surface Book 3 series devices.
This patch provides the basic necessities for communication with the SAM
EC on 5th and later generation devices. On these devices, the EC
provides an interface that acts as serial device, called the Surface
Serial Hub (SSH). 4th generation devices, on which the EC interface is
provided via an HID-over-I2C device, are not supported by this patch.
Specifically, this patch adds a driver for the SSH device (device HID
MSHW0084 in ACPI), as well as a controller structure and associated API.
This represents the functional core of the Surface Aggregator kernel
subsystem, introduced with this patch, and will be expanded upon in
subsequent commits.
The SSH driver acts as the main attachment point for this subsystem and
sets-up and manages the controller structure. The controller in turn
provides a basic communication interface, allowing to send requests from
host to EC and receiving the corresponding responses, as well as
managing and receiving events, sent from EC to host. It is structured
into multiple layers, with the top layer presenting the API used by
other kernel drivers and the lower layers modeled after the serial
protocol used for communication.
Said other drivers are then responsible for providing the (Surface model
specific) functionality accessible through the EC (e.g. battery status
reporting, thermal information, ...) via said controller structure and
API, and will be added in future commits.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20201221183959.1186143-2-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Shyam Sundar S K [Wed, 30 Dec 2020 08:10:28 +0000 (13:40 +0530)]
platform/x86: amd-pmc: Fix CONFIG_DEBUG_FS check
lkp reported that CONFIG_DEBUG_FS was not defined because of wrong usage
if macro, correcting it now.
Fixes:
156ec4731cb2 ("platform/x86: amd-pmc: Add AMD platform support for S2Idle")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20201230081028.2615217-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Mark Pearson [Wed, 30 Dec 2020 02:47:26 +0000 (21:47 -0500)]
platform/x86: thinkpad_acpi: correct palmsensor error checking
The previous commit adding functionality for the palm sensor had a
mistake which meant the error conditions on initialisation was not checked
correctly. On some older platforms this meant that if the sensor wasn't
available an error would be returned and the driver would fail to load.
This commit corrects the error condition. Many thanks to Mario Oenning
for reporting and determining the issue
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20201230024726.7861-1-markpearson@lenovo.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Arnold Gozum [Sat, 26 Dec 2020 20:53:06 +0000 (15:53 -0500)]
platform/x86: intel-vbtn: Support for tablet mode on Dell Inspiron 7352
The Dell Inspiron 7352 is a 2-in-1 model that has chassis-type "Notebook".
Add this model to the dmi_switches_allow_list.
Signed-off-by: Arnold Gozum <arngozum@gmail.com>
Link: https://lore.kernel.org/r/20201226205307.249659-1-arngozum@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>