OSDN Git Service
Brian Foster [Fri, 26 Aug 2016 06:01:59 +0000 (16:01 +1000)]
xfs: prevent dropping ioend completions during buftarg wait
commit
800b2694f890cc35a1bda63501fc71c94389d517 upstream.
xfs_wait_buftarg() waits for all pending I/O, drains the ioend
completion workqueue and walks the LRU until all buffers in the cache
have been released. This is traditionally an unmount operation` but the
mechanism is also reused during filesystem freeze.
xfs_wait_buftarg() invokes drain_workqueue() as part of the quiesce,
which is intended more for a shutdown sequence in that it indicates to
the queue that new operations are not expected once the drain has begun.
New work jobs after this point result in a WARN_ON_ONCE() and are
otherwise dropped.
With filesystem freeze, however, read operations are allowed and can
proceed during or after the workqueue drain. If such a read occurs
during the drain sequence, the workqueue infrastructure complains about
the queued ioend completion work item and drops it on the floor. As a
result, the buffer remains on the LRU and the freeze never completes.
Despite the fact that the overall buffer cache cleanup is not necessary
during freeze, fix up this operation such that it is safe to invoke
during non-unmount quiesce operations. Replace the drain_workqueue()
call with flush_workqueue(), which runs a similar serialization on
pending workqueue jobs without causing new jobs to be dropped. This is
safe for unmount as unmount independently locks out new operations by
the time xfs_wait_buftarg() is invoked.
cc: <stable@vger.kernel.org>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Kent [Mon, 19 Sep 2016 21:44:12 +0000 (14:44 -0700)]
autofs: use dentry flags to block walks during expire
commit
7cbdb4a286a60c5d519cb9223fe2134d26870d39 upstream.
Somewhere along the way the autofs expire operation has changed to hold
a spin lock over expired dentry selection. The autofs indirect mount
expired dentry selection is complicated and quite lengthy so it isn't
appropriate to hold a spin lock over the operation.
Commit
47be61845c77 ("fs/dcache.c: avoid soft-lockup in dput()") added a
might_sleep() to dput() causing a WARN_ONCE() about this usage to be
issued.
But the spin lock doesn't need to be held over this check, the autofs
dentry info. flags are enough to block walks into dentrys during the
expire.
I've left the direct mount expire as it is (for now) because it is much
simpler and quicker than the indirect mount expire and adding spin lock
release and re-aquires would do nothing more than add overhead.
Fixes:
47be61845c77 ("fs/dcache.c: avoid soft-lockup in dput()")
Link: http://lkml.kernel.org/r/20160912014017.1773.73060.stgit@pluto.themaw.net
Signed-off-by: Ian Kent <raven@themaw.net>
Reported-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Takashi Iwai <tiwai@suse.de>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: NeilBrown <neilb@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Sun, 12 Jun 2016 15:24:46 +0000 (11:24 -0400)]
autofs races
commit
ea01a18494b3d7a91b2f1f2a6a5aaef4741bc294 upstream.
* make autofs4_expire_indirect() skip the dentries being in process of
expiry
* do *not* mess with list_move(); making sure that dentry with
AUTOFS_INF_EXPIRING are not picked for expiry is enough.
* do not remove NO_RCU when we set EXPIRING, don't bother with smp_mb()
there. Clear it at the same time we clear EXPIRING. Makes a bunch of
tests simpler.
* rename NO_RCU to WANT_EXPIRE, which is what it really is.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thierry Reding [Thu, 21 Jan 2016 14:04:59 +0000 (15:04 +0100)]
pwm: Mark all devices as "might sleep"
commit
ff01c944cfa939f3474c28d88223213494aedf0b upstream.
Commit
d1cd21427747 ("pwm: Set enable state properly on failed call to
enable") introduced a mutex that is needed to protect internal state of
PWM devices. Since that mutex is acquired in pwm_set_polarity() and in
pwm_enable() and might potentially block, all PWM devices effectively
become "might sleep".
It's rather pointless to keep the .can_sleep field around, but given
that there are external users let's postpone the removal for the next
release cycle.
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes:
d1cd21427747 ("pwm: Set enable state properly on failed call to enable")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Davide Caratti [Wed, 31 Aug 2016 12:16:44 +0000 (14:16 +0200)]
bridge: re-introduce 'fix parsing of MLDv2 reports'
[ Upstream commit
9264251ee2a55bce8fb93826b3f581fb9eb7e2c2 ]
commit
bc8c20acaea1 ("bridge: multicast: treat igmpv3 report with
INCLUDE and no sources as a leave") seems to have accidentally reverted
commit
47cc84ce0c2f ("bridge: fix parsing of MLDv2 reports"). This
commit brings back a change to br_ip6_multicast_mld2_report() where
parsing of MLDv2 reports stops when the first group is successfully
added to the MDB cache.
Fixes:
bc8c20acaea1 ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Russell King [Sat, 27 Aug 2016 16:33:03 +0000 (17:33 +0100)]
net: smc91x: fix SMC accesses
[ Upstream commit
2fb04fdf30192ff1e2b5834e9b7745889ea8bbcb ]
Commit
b70661c70830 ("net: smc91x: use run-time configuration on all ARM
machines") broke some ARM platforms through several mistakes. Firstly,
the access size must correspond to the following rule:
(a) at least one of 16-bit or 8-bit access size must be supported
(b) 32-bit accesses are optional, and may be enabled in addition to
the above.
Secondly, it provides no emulation of 16-bit accesses, instead blindly
making 16-bit accesses even when the platform specifies that only 8-bit
is supported.
Reorganise smc91x.h so we can make use of the existing 16-bit access
emulation already provided - if 16-bit accesses are supported, use
16-bit accesses directly, otherwise if 8-bit accesses are supported,
use the provided 16-bit access emulation. If neither, BUG(). This
exactly reflects the driver behaviour prior to the commit being fixed.
Since the conversion incorrectly cut down the available access sizes on
several platforms, we also need to go through every platform and fix up
the overly-restrictive access size: Arnd assumed that if a platform can
perform 32-bit, 16-bit and 8-bit accesses, then only a 32-bit access
size needed to be specified - not so, all available access sizes must
be specified.
This likely fixes some performance regressions in doing this: if a
platform does not support 8-bit accesses, 8-bit accesses have been
emulated by performing a 16-bit read-modify-write access.
Tested on the Intel Assabet/Neponset platform, which supports only 8-bit
accesses, which was broken by the original commit.
Fixes:
b70661c70830 ("net: smc91x: use run-time configuration on all ARM machines")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xander Huff [Wed, 24 Aug 2016 21:47:53 +0000 (16:47 -0500)]
Revert "phy: IRQ cannot be shared"
[ Upstream commit
c3e70edd7c2eed6acd234627a6007627f5c76e8e ]
This reverts:
commit
33c133cc7598 ("phy: IRQ cannot be shared")
On hardware with multiple PHY devices hooked up to the same IRQ line, allow
them to share it.
Sergei Shtylyov says:
"I'm not sure now what was the reason I concluded that the IRQ sharing
was impossible... most probably I thought that the kernel IRQ handling
code exited the loop over the IRQ actions once IRQ_HANDLED was returned
-- which is obviously not so in reality..."
Signed-off-by: Xander Huff <xander.huff@ni.com>
Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Fainelli [Wed, 24 Aug 2016 18:01:20 +0000 (11:01 -0700)]
net: dsa: bcm_sf2: Fix race condition while unmasking interrupts
[ Upstream commit
4f101c47791cdcb831b3ef1f831b1cc51e4fe03c ]
We kept shadow copies of which interrupt sources we have enabled and
disabled, but due to an order bug in how intrl2_mask_clear was defined,
we could run into the following scenario:
CPU0 CPU1
intrl2_1_mask_clear(..)
sets INTRL2_CPU_MASK_CLEAR
bcm_sf2_switch_1_isr
read INTRL2_CPU_STATUS and masks with stale
irq1_mask value
updates irq1_mask value
Which would make us loop again and again trying to process and interrupt
we are not clearing since our copy of whether it was enabled before
still indicates it was not. Fix this by updating the shadow copy first,
and then unasking at the HW level.
Fixes:
246d7f773c13 ("net: dsa: add Broadcom SF2 switch driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Blakey [Thu, 18 Aug 2016 18:09:05 +0000 (21:09 +0300)]
net/mlx5: Added missing check of msg length in verifying its signature
[ Upstream commit
2c0f8ce1b584a4d7b8ff53140d21dfed99834940 ]
Set and verify signature calculates the signature for each of the
mailbox nodes, even for those that are unused (from cache). Added
a missing length check to set and verify only those which are used.
While here, also moved the setting of msg's nodes token to where we
already go over them. This saves a pass because checksum is disabled,
and the only useful thing remaining that set signature does is setting
the token.
Fixes:
e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB
adapters')
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vegard Nossum [Sat, 23 Jul 2016 06:15:04 +0000 (08:15 +0200)]
tipc: fix NULL pointer dereference in shutdown()
[ Upstream commit
d2fbdf76b85bcdfe57b8ef2ba09d20e8ada79abd ]
tipc_msg_create() can return a NULL skb and if so, we shouldn't try to
call tipc_node_xmit_skb() on it.
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 3 PID: 30298 Comm: trinity-c0 Not tainted 4.7.0-rc7+ #19
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
task:
ffff8800baf09980 ti:
ffff8800595b8000 task.ti:
ffff8800595b8000
RIP: 0010:[<
ffffffff830bb46b>] [<
ffffffff830bb46b>] tipc_node_xmit_skb+0x6b/0x140
RSP: 0018:
ffff8800595bfce8 EFLAGS:
00010246
RAX:
0000000000000000 RBX:
0000000000000000 RCX:
000000003023b0e0
RDX:
0000000000000000 RSI:
dffffc0000000000 RDI:
ffffffff83d12580
RBP:
ffff8800595bfd78 R08:
ffffed000b2b7f32 R09:
0000000000000000
R10:
fffffbfff0759725 R11:
0000000000000000 R12:
1ffff1000b2b7f9f
R13:
ffff8800595bfd58 R14:
ffffffff83d12580 R15:
dffffc0000000000
FS:
00007fcdde242700(0000) GS:
ffff88011af80000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007fcddde1db10 CR3:
000000006874b000 CR4:
00000000000006e0
DR0:
00007fcdde248000 DR1:
00007fcddd73d000 DR2:
00007fcdde248000
DR3:
0000000000000000 DR6:
00000000ffff0ff0 DR7:
0000000000090602
Stack:
0000000000000018 0000000000000018 0000000041b58ab3 ffffffff83954208
ffffffff830bb400 ffff8800595bfd30 ffffffff8309d767 0000000000000018
0000000000000018 ffff8800595bfd78 ffffffff8309da1a 00000000810ee611
Call Trace:
[<
ffffffff830c84a3>] tipc_shutdown+0x553/0x880
[<
ffffffff825b4a3b>] SyS_shutdown+0x14b/0x170
[<
ffffffff8100334c>] do_syscall_64+0x19c/0x410
[<
ffffffff83295ca5>] entry_SYSCALL64_slow_path+0x25/0x25
Code: 90 00 b4 0b 83 c7 00 f1 f1 f1 f1 4c 8d 6d e0 c7 40 04 00 00 00 f4 c7 40 08 f3 f3 f3 f3 48 89 d8 48 c1 e8 03 c7 45 b4 00 00 00 00 <80> 3c 30 00 75 78 48 8d 7b 08 49 8d 75 c0 48 b8 00 00 00 00 00
RIP [<
ffffffff830bb46b>] tipc_node_xmit_skb+0x6b/0x140
RSP <
ffff8800595bfce8>
---[ end trace
57b0484e351e71f1 ]---
I feel like we should maybe return -ENOMEM or -ENOBUFS, but I'm not sure
userspace is equipped to handle that. Anyway, this is better than a GPF
and looks somewhat consistent with other tipc_msg_create() callers.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vegard Nossum [Fri, 12 Aug 2016 08:29:13 +0000 (10:29 +0200)]
net/irda: handle iriap_register_lsap() allocation failure
[ Upstream commit
5ba092efc7ddff040777ae7162f1d195f513571b ]
If iriap_register_lsap() fails to allocate memory, self->lsap is
set to NULL. However, none of the callers handle the failure and
irlmp_connect_request() will happily dereference it:
iriap_register_lsap: Unable to allocated LSAP!
================================================================================
UBSAN: Undefined behaviour in net/irda/irlmp.c:378:2
member access within null pointer of type 'struct lsap_cb'
CPU: 1 PID: 15403 Comm: trinity-c0 Not tainted 4.8.0-rc1+ #81
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org
04/01/2014
0000000000000000 ffff88010c7e78a8 ffffffff82344f40 0000000041b58ab3
ffffffff84f98000 ffffffff82344e94 ffff88010c7e78d0 ffff88010c7e7880
ffff88010630ad00 ffffffff84a5fae0 ffffffff84d3f5c0 000000000000017a
Call Trace:
[<
ffffffff82344f40>] dump_stack+0xac/0xfc
[<
ffffffff8242f5a8>] ubsan_epilogue+0xd/0x8a
[<
ffffffff824302bf>] __ubsan_handle_type_mismatch+0x157/0x411
[<
ffffffff83b7bdbc>] irlmp_connect_request+0x7ac/0x970
[<
ffffffff83b77cc0>] iriap_connect_request+0xa0/0x160
[<
ffffffff83b77f48>] state_s_disconnect+0x88/0xd0
[<
ffffffff83b78904>] iriap_do_client_event+0x94/0x120
[<
ffffffff83b77710>] iriap_getvaluebyclass_request+0x3e0/0x6d0
[<
ffffffff83ba6ebb>] irda_find_lsap_sel+0x1eb/0x630
[<
ffffffff83ba90c8>] irda_connect+0x828/0x12d0
[<
ffffffff833c0dfb>] SYSC_connect+0x22b/0x340
[<
ffffffff833c7e09>] SyS_connect+0x9/0x10
[<
ffffffff81007bd3>] do_syscall_64+0x1b3/0x4b0
[<
ffffffff845f946a>] entry_SYSCALL64_slow_path+0x25/0x25
================================================================================
The bug seems to have been around since forever.
There's more problems with missing error checks in iriap_init() (and
indeed all of irda_init()), but that's a bigger problem that needs
very careful review and testing. This patch will fix the most serious
bug (as it's easily reached from unprivileged userspace).
I have tested my patch with a reproducer.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lance Richardson [Tue, 9 Aug 2016 19:29:42 +0000 (15:29 -0400)]
vti: flush x-netns xfrm cache when vti interface is removed
[ Upstream commit
a5d0dc810abf3d6b241777467ee1d6efb02575fc ]
When executing the script included below, the netns delete operation
hangs with the following message (repeated at 10 second intervals):
kernel:unregister_netdevice: waiting for lo to become free. Usage count = 1
This occurs because a reference to the lo interface in the "secure" netns
is still held by a dst entry in the xfrm bundle cache in the init netns.
Address this problem by garbage collecting the tunnel netns flow cache
when a cross-namespace vti interface receives a NETDEV_DOWN notification.
A more detailed description of the problem scenario (referencing commands
in the script below):
(1) ip link add vti_test type vti local 1.1.1.1 remote 1.1.1.2 key 1
The vti_test interface is created in the init namespace. vti_tunnel_init()
attaches a struct ip_tunnel to the vti interface's netdev_priv(dev),
setting the tunnel net to &init_net.
(2) ip link set vti_test netns secure
The vti_test interface is moved to the "secure" netns. Note that
the associated struct ip_tunnel still has tunnel->net set to &init_net.
(3) ip netns exec secure ping -c 4 -i 0.02 -I 192.168.100.1 192.168.200.1
The first packet sent using the vti device causes xfrm_lookup() to be
called as follows:
dst = xfrm_lookup(tunnel->net, skb_dst(skb), fl, NULL, 0);
Note that tunnel->net is the init namespace, while skb_dst(skb) references
the vti_test interface in the "secure" namespace. The returned dst
references an interface in the init namespace.
Also note that the first parameter to xfrm_lookup() determines which flow
cache is used to store the computed xfrm bundle, so after xfrm_lookup()
returns there will be a cached bundle in the init namespace flow cache
with a dst referencing a device in the "secure" namespace.
(4) ip netns del secure
Kernel begins to delete the "secure" namespace. At some point the
vti_test interface is deleted, at which point dst_ifdown() changes
the dst->dev in the cached xfrm bundle flow from vti_test to lo (still
in the "secure" namespace however).
Since nothing has happened to cause the init namespace's flow cache
to be garbage collected, this dst remains attached to the flow cache,
so the kernel loops waiting for the last reference to lo to go away.
<Begin script>
ip link add br1 type bridge
ip link set dev br1 up
ip addr add dev br1 1.1.1.1/8
ip netns add secure
ip link add vti_test type vti local 1.1.1.1 remote 1.1.1.2 key 1
ip link set vti_test netns secure
ip netns exec secure ip link set vti_test up
ip netns exec secure ip link s lo up
ip netns exec secure ip addr add dev lo 192.168.100.1/24
ip netns exec secure ip route add 192.168.200.0/24 dev vti_test
ip xfrm policy flush
ip xfrm state flush
ip xfrm policy add dir out tmpl src 1.1.1.1 dst 1.1.1.2 \
proto esp mode tunnel mark 1
ip xfrm policy add dir in tmpl src 1.1.1.2 dst 1.1.1.1 \
proto esp mode tunnel mark 1
ip xfrm state add src 1.1.1.1 dst 1.1.1.2 proto esp spi 1 \
mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788
ip xfrm state add src 1.1.1.2 dst 1.1.1.1 proto esp spi 1 \
mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788
ip netns exec secure ping -c 4 -i 0.02 -I 192.168.100.1 192.168.200.1
ip netns del secure
<End script>
Reported-by: Hangbin Liu <haliu@redhat.com>
Reported-by: Jan Tluka <jtluka@redhat.com>
Signed-off-by: Lance Richardson <lrichard@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Thu, 1 Sep 2016 21:43:53 +0000 (14:43 -0700)]
af_unix: split 'u->readlock' into two: 'iolock' and 'bindlock'
commit
6e1ce3c3451291142a57c4f3f6f999a29fb5b3bc upstream.
Right now we use the 'readlock' both for protecting some of the af_unix
IO path and for making the bind be single-threaded.
The two are independent, but using the same lock makes for a nasty
deadlock due to ordering with regards to filesystem locking. The bind
locking would want to nest outside the VSF pathname locking, but the IO
locking wants to nest inside some of those same locks.
We tried to fix this earlier with commit
c845acb324aa ("af_unix: Fix
splice-bind deadlock") which moved the readlock inside the vfs locks,
but that caused problems with overlayfs that will then call back into
filesystem routines that take the lock in the wrong order anyway.
Splitting the locks means that we can go back to having the bind lock be
the outermost lock, and we don't have any deadlocks with lock ordering.
Acked-by: Rainer Weikusat <rweikusat@cyberadapt.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Thu, 1 Sep 2016 21:56:49 +0000 (14:56 -0700)]
Revert "af_unix: Fix splice-bind deadlock"
commit
38f7bd94a97b542de86a2be9229289717e33a7a4 upstream.
This reverts commit
c845acb324aa85a39650a14e7696982ceea75dc1.
It turns out that it just replaces one deadlock with another one: we can
still get the wrong lock ordering with the readlock due to overlayfs
calling back into the filesystem layer and still taking the vfs locks
after the readlock.
The proper solution ends up being to just split the readlock into two
pieces: the bind lock (taken *outside* the vfs locks) and the IO lock
(taken *inside* the filesystem locks). The two locks are independent
anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mahesh Bandewar [Fri, 2 Sep 2016 05:18:34 +0000 (22:18 -0700)]
bonding: Fix bonding crash
[ Upstream commit
24b27fc4cdf9e10c5e79e5923b6b7c2c5c95096c ]
Following few steps will crash kernel -
(a) Create bonding master
> modprobe bonding miimon=50
(b) Create macvlan bridge on eth2
> ip link add link eth2 dev mvl0 address aa:0:0:0:0:01 \
type macvlan
(c) Now try adding eth2 into the bond
> echo +eth2 > /sys/class/net/bond0/bonding/slaves
<crash>
Bonding does lots of things before checking if the device enslaved is
busy or not.
In this case when the notifier call-chain sends notifications, the
bond_netdev_event() assumes that the rx_handler /rx_handler_data is
registered while the bond_enslave() hasn't progressed far enough to
register rx_handler for the new slave.
This patch adds a rx_handler check that can be performed right at the
beginning of the enslave code to avoid getting into this situation.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maurizio Lombardi [Fri, 22 Jan 2016 12:41:42 +0000 (13:41 +0100)]
megaraid: fix null pointer check in megasas_detach_one().
commit
546e559c79b1a8d27c23262907a00fc209e392a0 upstream.
The pd_seq_sync pointer can't be NULL, we have to check its entries
instead.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Mon, 14 Mar 2016 14:24:10 +0000 (15:24 +0100)]
nouveau: fix nv40_perfctr_next() cleanup regression
commit
86d65b7e7a0c927d07d18605c276d0f142438ead upstream.
gcc-6 warns about code in the nouveau driver that is obviously silly:
drivers/gpu/drm/nouveau/nvkm/engine/pm/nv40.c: In function 'nv40_perfctr_next':
drivers/gpu/drm/nouveau/nvkm/engine/pm/nv40.c:62:19: warning: self-comparison always evaluats to false [-Wtautological-compare]
if (pm->sequence != pm->sequence) {
The behavior was accidentally introduced in a patch described as "This is
purely preparation for upcoming commits, there should be no code changes here.".
As far as I can tell, that was true for the rest of that patch except for
this one function, which has been changed to a NOP.
This patch restores the original behavior.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes:
8c1aeaa13954 ("drm/nouveau/pm: cosmetic changes")
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Sat, 23 Jan 2016 19:33:10 +0000 (19:33 +0000)]
Staging: iio: adc: fix indent on break statement
commit
b6acb0cfc21293a1bfc283e9217f58f7474ef728 upstream.
Fix indent warning when building with gcc 6:
drivers/staging/iio/adc/ad7192.c:239:4: warning: statement is indented
as if it were guarded by... [-Wmisleading-indentation]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Thu, 19 May 2016 07:58:49 +0000 (09:58 +0200)]
iwlegacy: avoid warning about missing braces
commit
2cce76c3fab410520610a7d2f52faebc3cfcf843 upstream.
gcc-6 warns about code in il3945_hw_txq_ctx_free() being
somewhat ambiguous:
drivers/net/wireless/intel/iwlegacy/3945.c:1022:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses]
This adds a set of curly braces to avoid the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Mon, 14 Mar 2016 14:18:37 +0000 (15:18 +0100)]
ath9k: fix misleading indentation
commit
362210e0dff4eb7bb36a9b34dbef3b39d779d95e upstream.
A cleanup patch in linux-3.18 moved around some code in the ath9k
driver and left some code to be indented in a misleading way,
made worse by the addition of some new code for p2p mode, as
discovered by a new gcc-6 warning:
drivers/net/wireless/ath/ath9k/init.c: In function 'ath9k_set_hw_capab':
drivers/net/wireless/ath/ath9k/init.c:851:4: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation]
hw->wiphy->iface_combinations = if_comb;
^~
drivers/net/wireless/ath/ath9k/init.c:847:3: note: ...this 'if' clause, but it is not
if (ath9k_is_chanctx_enabled())
^~
The code is in fact correct, but the indentation is not, so I'm
reformatting it as it should have been after the original cleanup.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes:
499afaccf6f3 ("ath9k: Isolate ath9k_use_chanctx module parameter")
Fixes:
eb61f9f623f7 ("ath9k: advertise p2p dev support when chanctx")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Mon, 14 Mar 2016 22:40:08 +0000 (19:40 -0300)]
am437x-vfpe: fix typo in vpfe_get_app_input_index
commit
0fb504001192c1df62c847a8bb6558753c36ebef upstream.
gcc-6 points out an obviously silly comparison in vpfe_get_app_input_index():
drivers/media/platform/am437x/am437x-vpfe.c: In function 'vpfe_get_app_input_index':
drivers/media/platform/am437x/am437x-vpfe.c:1709:27: warning: self-comparison always evaluats to true [-Wtautological-compare]
client->adapter->nr == client->adapter->nr) {
^~
This was introduced in a slighly incorrect conversion, and it's
clear that the comparison was meant to compare the iterator
to the current subdev instead, as we do in the line above.
Fixes:
d37232390fd4 ("[media] media: am437x-vpfe: match the OF node/i2c addr instead of name")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Thu, 28 Jul 2016 03:03:31 +0000 (20:03 -0700)]
Add braces to avoid "ambiguous ‘else’" compiler warnings
commit
194dc870a5890e855ecffb30f3b80ba7c88f96d6 upstream.
Some of our "for_each_xyz()" macro constructs make gcc unhappy about
lack of braces around if-statements inside or outside the loop, because
the loop construct itself has a "if-then-else" statement inside of it.
The resulting warnings look something like this:
drivers/gpu/drm/i915/i915_debugfs.c: In function ‘i915_dump_lrc’:
drivers/gpu/drm/i915/i915_debugfs.c:2103:6: warning: suggest explicit braces to avoid ambiguous ‘else’ [-Wparentheses]
if (ctx != dev_priv->kernel_context)
^
even if the code itself is fine.
Since the warning is fairly easy to avoid by adding a braces around the
if-statement near the for_each_xyz() construct, do so, rather than
disabling the otherwise potentially useful warning.
(The if-then-else statements used in the "for_each_xyz()" constructs are
designed to be inherently safe even with no braces, but in this case
it's quite understandable that gcc isn't really able to tell that).
This finally leaves the standard "allmodconfig" build with just a
handful of remaining warnings, so new and valid warnings hopefully will
stand out.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Mon, 14 Mar 2016 14:18:38 +0000 (15:18 +0100)]
net: caif: fix misleading indentation
commit
8e0cc8c326d99e41468c96fea9785ab78883a281 upstream.
gcc points out code that is not indented the way it is
interpreted:
net/caif/cfpkt_skbuff.c: In function 'cfpkt_setlen':
net/caif/cfpkt_skbuff.c:289:4: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation]
return cfpkt_getlen(pkt);
^~~~~~
net/caif/cfpkt_skbuff.c:286:3: note: ...this 'else' clause, but it is not
else
^~~~
It is clear from the context that not returning here would be
a bug, as we'd end up passing a negative length into a function
that takes a u16 length, so it is not missing curly braces
here, and I'm assuming that the indentation is the only part
that's wrong about it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt [Fri, 29 Jul 2016 02:30:43 +0000 (22:30 -0400)]
Makefile: Mute warning for __builtin_return_address(>0) for tracing only
commit
377ccbb483738f84400ddf5840c7dd8825716985 upstream.
With the latest gcc compilers, they give a warning if
__builtin_return_address() parameter is greater than 0. That is because if
it is used by a function called by a top level function (or in the case of
the kernel, by assembly), it can try to access stack frames outside the
stack and crash the system.
The tracing system uses __builtin_return_address() of up to 2! But it is
well aware of the dangers that it may have, and has even added precautions
to protect against it (see the thunk code in arch/x86/entry/thunk*.S)
Linus originally added KBUILD_CFLAGS that would suppress the warning for the
entire kernel, as simply adding KBUILD_CFLAGS to the tracing directory
wouldn't work. The tracing directory plays a bit with the CFLAGS and
requires a little more logic.
This adds that special logic to only suppress the warning for the tracing
directory. If it is used anywhere else outside of tracing, the warning will
still be triggered.
Link: http://lkml.kernel.org/r/20160728223043.51996267@grimm.local.home
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Thu, 28 Jul 2016 02:03:04 +0000 (19:03 -0700)]
Disable "frame-address" warning
commit
124a3d88fa20e1869fc229d7d8c740cc81944264 upstream.
Newer versions of gcc warn about the use of __builtin_return_address()
with a non-zero argument when "-Wall" is specified:
kernel/trace/trace_irqsoff.c: In function ‘stop_critical_timings’:
kernel/trace/trace_irqsoff.c:433:86: warning: calling ‘__builtin_return_address’ with a nonzero argument is unsafe [-Wframe-address]
stop_critical_timing(CALLER_ADDR0, CALLER_ADDR1);
[ .. repeats a few times for other similar cases .. ]
It is true that a non-zero argument is somewhat dangerous, and we do not
actually have very many uses of that in the kernel - but the ftrace code
does use it, and as Stephen Rostedt says:
"We are well aware of the danger of using __builtin_return_address() of
> 0. In fact that's part of the reason for having the "thunk" code in
x86 (See arch/x86/entry/thunk_{64,32}.S). [..] it adds extra frames
when tracking irqs off sections, to prevent __builtin_return_address()
from accessing bad areas. In fact the thunk_32.S states: 'Trampoline to
trace irqs off. (otherwise CALLER_ADDR1 might crash)'."
For now, __builtin_return_address() with a non-zero argument is the best
we can do, and the warning is not helpful and can end up making people
miss other warnings for real problems.
So disable the frame-address warning on compilers that need it.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Wed, 27 Jul 2016 20:17:41 +0000 (13:17 -0700)]
Disable "maybe-uninitialized" warning globally
commit
6e8d666e925333c55378e8d5540a8a9ee0eea9c5 upstream.
Several build configurations had already disabled this warning because
it generates a lot of false positives. But some had not, and it was
still enabled for "allmodconfig" builds, for example.
Looking at the warnings produced, every single one I looked at was a
false positive, and the warnings are frequent enough (and big enough)
that they can easily hide real problems that you don't notice in the
noise generated by -Wmaybe-uninitialized.
The warning is good in theory, but this is a classic case of a warning
that causes more problems than the warning can solve.
If gcc gets better at avoiding false positives, we may be able to
re-enable this warning. But as is, we're better off without it, and I
want to be able to see the *real* warnings.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Mon, 25 Apr 2016 15:35:31 +0000 (17:35 +0200)]
gcov: disable -Wmaybe-uninitialized warning
commit
e72e2dfe7c16ffbfbabf9cb24adc6d9f93a4fe37 upstream.
When gcov profiling is enabled, we see a lot of spurious warnings about
possibly uninitialized variables being used:
arch/arm/mm/dma-mapping.c: In function 'arm_coherent_iommu_map_page':
arch/arm/mm/dma-mapping.c:1085:16: warning: 'start' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/clk/st/clk-flexgen.c: In function 'st_of_flexgen_setup':
drivers/clk/st/clk-flexgen.c:323:9: warning: 'num_parents' may be used uninitialized in this function [-Wmaybe-uninitialized]
kernel/cgroup.c: In function 'cgroup_mount':
kernel/cgroup.c:2119:11: warning: 'root' may be used uninitialized in this function [-Wmaybe-uninitialized]
All of these are false positives, so it seems better to just disable
the warnings whenever GCOV is enabled. Most users don't enable GCOV,
and based on a prior patch, it is now also disabled for 'allmodconfig'
builds, so there should be no downsides of doing this.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Mon, 25 Apr 2016 15:35:28 +0000 (17:35 +0200)]
Kbuild: disable 'maybe-uninitialized' warning for CONFIG_PROFILE_ALL_BRANCHES
commit
815eb71e7149ecce40db9dd0ad09c4dd9d33c60f upstream.
CONFIG_PROFILE_ALL_BRANCHES confuses gcc-5.x to the degree that it prints
incorrect warnings about a lot of variables that it thinks can be used
uninitialized, e.g.:
i2c/busses/i2c-diolan-u2c.c: In function 'diolan_usb_xfer':
i2c/busses/i2c-diolan-u2c.c:391:16: warning: 'byte' may be used uninitialized in this function
iio/gyro/itg3200_core.c: In function 'itg3200_probe':
iio/gyro/itg3200_core.c:213:6: warning: 'val' may be used uninitialized in this function
leds/leds-lp55xx-common.c: In function 'lp55xx_update_bits':
leds/leds-lp55xx-common.c:350:6: warning: 'tmp' may be used uninitialized in this function
misc/bmp085.c: In function 'show_pressure':
misc/bmp085.c:363:10: warning: 'pressure' may be used uninitialized in this function
power/ds2782_battery.c: In function 'ds2786_get_capacity':
power/ds2782_battery.c:214:17: warning: 'raw' may be used uninitialized in this function
These are all false positives that either rob someone's time when trying
to figure out whether they are real, or they get people to send wrong
patches to shut up the warnings.
Nobody normally wants to run a CONFIG_PROFILE_ALL_BRANCHES kernel in
production, so disabling the whole class of warnings for this configuration
has no serious downsides either.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Steven Rostedt <rostedtgoodmis.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robert Jarzmik [Sat, 2 Apr 2016 19:38:53 +0000 (21:38 +0200)]
kbuild: forbid kernel directory to contain spaces and colons
commit
51193b76bfff5027cf96ba63effae808ad67cca7 upstream.
When the kernel path contains a space or a colon somewhere in the path
name, the modules_install target doesn't work anymore, as the path names
are not enclosed in double quotes. It is also supposed that and O= build
will suffer from the same weakness as modules_install.
Instead of checking and improving kbuild to resist to directories
including these characters, error out early to prevent any build if the
kernel's main directory contains a space.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josh Poimboeuf [Thu, 3 Mar 2016 14:53:43 +0000 (08:53 -0600)]
tools: Support relative directory path for 'O='
commit
e17cf3a80d4ba0c4e40bf1a89deb1354c2e10e14 upstream.
Running "make O=foo" (with a relative directory path) fails with:
scripts/Makefile.include:3: *** O=foo does not exist. Stop.
/home/jpoimboe/git/linux/Makefile:1547: recipe for target 'tools/objtool' failed
The tools Makefile gets confused by the relative path and tries to build
objtool in tools/foo. Convert the output directory to an absolute path
before passing it to the tools Makefile.
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-next@vger.kernel.org
Cc: linux@roeck-us.net
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/94a078c6c998fac9f01a14f574008bf7dff40191.1457016803.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wang YanQing [Thu, 10 Dec 2015 16:35:19 +0000 (00:35 +0800)]
Makefile: revert "Makefile: Document ability to make file.lst and file.S" partially
commit
40ab87a4003c7952976ce901a2b9ece5ed833168 upstream.
Commit
627189797807 ("Makefile: Document ability to make file.lst
and file.S") document ability to make file.S, but there isn't such
ability in kbuild, so revert it.
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michal Marek [Thu, 10 Dec 2015 14:53:06 +0000 (15:53 +0100)]
kbuild: Do not run modules_install and install in paralel
commit
a85a41ed69f27c4c667d8c418df14b4fb220c4ad upstream.
Based on a x86-only patch by Andy Lutomirski <luto@amacapital.net>
With modular kernels, 'make install' is going to need the installed
modules at some point to generate the initramfs.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ashish Samant [Mon, 19 Sep 2016 21:44:42 +0000 (14:44 -0700)]
ocfs2: fix start offset to ocfs2_zero_range_for_truncate()
commit
d21c353d5e99c56cdd5b5c1183ffbcaf23b8b960 upstream.
If we punch a hole on a reflink such that following conditions are met:
1. start offset is on a cluster boundary
2. end offset is not on a cluster boundary
3. (end offset is somewhere in another extent) or
(hole range > MAX_CONTIG_BYTES(1MB)),
we dont COW the first cluster starting at the start offset. But in this
case, we were wrongly passing this cluster to
ocfs2_zero_range_for_truncate() to zero out. This will modify the
cluster in place and zero it in the source too.
Fix this by skipping this cluster in such a scenario.
To reproduce:
1. Create a random file of say 10 MB
xfs_io -c 'pwrite -b 4k 0 10M' -f 10MBfile
2. Reflink it
reflink -f 10MBfile reflnktest
3. Punch a hole at starting at cluster boundary with range greater that
1MB. You can also use a range that will put the end offset in another
extent.
fallocate -p -o 0 -l
1048615 reflnktest
4. sync
5. Check the first cluster in the source file. (It will be zeroed out).
dd if=10MBfile iflag=direct bs=<cluster size> count=1 | hexdump -C
Link: http://lkml.kernel.org/r/1470957147-14185-1-git-send-email-ashish.samant@oracle.com
Signed-off-by: Ashish Samant <ashish.samant@oracle.com>
Reported-by: Saar Maoz <saar.maoz@oracle.com>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Eric Ren <zren@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joseph Qi [Mon, 19 Sep 2016 21:43:55 +0000 (14:43 -0700)]
ocfs2/dlm: fix race between convert and migration
commit
e6f0c6e6170fec175fe676495f29029aecdf486c upstream.
Commit
ac7cf246dfdb ("ocfs2/dlm: fix race between convert and recovery")
checks if lockres master has changed to identify whether new master has
finished recovery or not. This will introduce a race that right after
old master does umount ( means master will change), a new convert
request comes.
In this case, it will reset lockres state to DLM_RECOVERING and then
retry convert, and then fail with lockres->l_action being set to
OCFS2_AST_INVALID, which will cause inconsistent lock level between
ocfs2 and dlm, and then finally BUG.
Since dlm recovery will clear lock->convert_pending in
dlm_move_lockres_to_recovery_list, we can use it to correctly identify
the race case between convert and recovery. So fix it.
Fixes:
ac7cf246dfdb ("ocfs2/dlm: fix race between convert and recovery")
Link: http://lkml.kernel.org/r/57CE1569.8010704@huawei.com
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Herbert Xu [Wed, 7 Sep 2016 10:42:08 +0000 (18:42 +0800)]
crypto: echainiv - Replace chaining with multiplication
commit
53a5d5ddccf849dbc27a8c1bba0b43c3a45fb792 upstream.
The current implementation uses a global per-cpu array to store
data which are used to derive the next IV. This is insecure as
the attacker may change the stored data.
This patch removes all traces of chaining and replaces it with
multiplication of the salt and the sequence number.
Fixes:
a10f554fa7e0 ("crypto: echainiv - Add encrypted chain IV...")
Reported-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Herbert Xu [Tue, 13 Sep 2016 06:43:29 +0000 (14:43 +0800)]
crypto: skcipher - Fix blkcipher walk OOM crash
commit
acdb04d0b36769b3e05990c488dc74d8b7ac8060 upstream.
When we need to allocate a temporary blkcipher_walk_next and it
fails, the code is supposed to take the slow path of processing
the data block by block. However, due to an unrelated change
we instead end up dereferencing the NULL pointer.
This patch fixes it by moving the unrelated bsize setting out
of the way so that we enter the slow path as inteded.
Fixes:
7607bd8ff03b ("[CRYPTO] blkcipher: Added blkcipher_walk_virt_block")
Reported-by: xiakaixu <xiakaixu@huawei.com>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ard Biesheuvel [Tue, 13 Sep 2016 08:48:52 +0000 (09:48 +0100)]
crypto: arm/aes-ctr - fix NULL dereference in tail processing
commit
f82e90b28654804ab72881d577d87c3d5c65e2bc upstream.
The AES-CTR glue code avoids calling into the blkcipher API for the
tail portion of the walk, by comparing the remainder of walk.nbytes
modulo AES_BLOCK_SIZE with the residual nbytes, and jumping straight
into the tail processing block if they are equal. This tail processing
block checks whether nbytes != 0, and does nothing otherwise.
However, in case of an allocation failure in the blkcipher layer, we
may enter this code with walk.nbytes == 0, while nbytes > 0. In this
case, we should not dereference the source and destination pointers,
since they may be NULL. So instead of checking for nbytes != 0, check
for (walk.nbytes % AES_BLOCK_SIZE) != 0, which implies the former in
non-error conditions.
Fixes:
86464859cc77 ("crypto: arm - AES in ECB/CBC/CTR/XTS modes using ARMv8 Crypto Extensions")
Reported-by: xiakaixu <xiakaixu@huawei.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ard Biesheuvel [Tue, 13 Sep 2016 08:48:53 +0000 (09:48 +0100)]
crypto: arm64/aes-ctr - fix NULL dereference in tail processing
commit
2db34e78f126c6001d79d3b66ab1abb482dc7caa upstream.
The AES-CTR glue code avoids calling into the blkcipher API for the
tail portion of the walk, by comparing the remainder of walk.nbytes
modulo AES_BLOCK_SIZE with the residual nbytes, and jumping straight
into the tail processing block if they are equal. This tail processing
block checks whether nbytes != 0, and does nothing otherwise.
However, in case of an allocation failure in the blkcipher layer, we
may enter this code with walk.nbytes == 0, while nbytes > 0. In this
case, we should not dereference the source and destination pointers,
since they may be NULL. So instead of checking for nbytes != 0, check
for (walk.nbytes % AES_BLOCK_SIZE) != 0, which implies the former in
non-error conditions.
Fixes:
49788fe2a128 ("arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions")
Reported-by: xiakaixu <xiakaixu@huawei.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Mon, 22 Aug 2016 18:31:10 +0000 (11:31 -0700)]
tcp: properly scale window in tcp_v[46]_reqsk_send_ack()
[ Upstream commit
20a2b49fc538540819a0c552877086548cff8d8d ]
When sending an ack in SYN_RECV state, we must scale the offered
window if wscale option was negotiated and accepted.
Tested:
Following packetdrill test demonstrates the issue :
0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
// Establish a connection.
+0 < S 0:0(0) win 20000 <mss 1000,sackOK,wscale 7, nop, TS val 100 ecr 0>
+0 > S. 0:0(0) ack 1 win 28960 <mss 1460,sackOK, TS val 100 ecr 100, nop, wscale 7>
+0 < . 1:11(10) ack 1 win 156 <nop,nop,TS val 99 ecr 100>
// check that window is properly scaled !
+0 > . 1:1(0) ack 1 win 226 <nop,nop,TS val 200 ecr 100>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Eric Dumazet [Wed, 17 Aug 2016 12:56:26 +0000 (05:56 -0700)]
tcp: fix use after free in tcp_xmit_retransmit_queue()
[ Upstream commit
bb1fceca22492109be12640d49f5ea5a544c6bb4 ]
When tcp_sendmsg() allocates a fresh and empty skb, it puts it at the
tail of the write queue using tcp_add_write_queue_tail()
Then it attempts to copy user data into this fresh skb.
If the copy fails, we undo the work and remove the fresh skb.
Unfortunately, this undo lacks the change done to tp->highest_sack and
we can leave a dangling pointer (to a freed skb)
Later, tcp_xmit_retransmit_queue() can dereference this pointer and
access freed memory. For regular kernels where memory is not unmapped,
this might cause SACK bugs because tcp_highest_sack_seq() is buggy,
returning garbage instead of tp->snd_nxt, but with various debug
features like CONFIG_DEBUG_PAGEALLOC, this can crash the kernel.
This bug was found by Marco Grassi thanks to syzkaller.
Fixes:
6859d49475d4 ("[TCP]: Abstract tp->highest_sack accessing & point to next skb")
Reported-by: Marco Grassi <marco.gra@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Artem Germanov [Wed, 7 Sep 2016 17:49:36 +0000 (10:49 -0700)]
tcp: cwnd does not increase in TCP YeAH
[ Upstream commit
db7196a0d0984b933ccf2cd6a60e26abf466e8a3 ]
Commit
76174004a0f19785a328f40388e87e982bbf69b9
(tcp: do not slow start when cwnd equals ssthresh )
introduced regression in TCP YeAH. Using 100ms delay 1% loss virtual
ethernet link kernel 4.2 shows bandwidth ~500KB/s for single TCP
connection and kernel 4.3 and above (including 4.8-rc4) shows bandwidth
~100KB/s.
That is caused by stalled cwnd when cwnd equals ssthresh. This patch
fixes it by proper increasing cwnd in this case.
Signed-off-by: Artem Germanov <agermanov@anchorfree.com>
Acked-by: Dmitry Adamushko <d.adamushko@anchorfree.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Dave Jones [Fri, 2 Sep 2016 18:39:50 +0000 (14:39 -0400)]
ipv6: release dst in ping_v6_sendmsg
[ Upstream commit
03c2778a938aaba0893f6d6cdc29511d91a79848 ]
Neither the failure or success paths of ping_v6_sendmsg release
the dst it acquires. This leads to a flood of warnings from
"net/core/dst.c:288 dst_release" on older kernels that
don't have
8bf4ada2e21378816b28205427ee6b0e1ca4c5f1 backported.
That patch optimistically hoped this had been fixed post 3.10, but
it seems at least one case wasn't, where I've seen this triggered
a lot from machines doing unprivileged icmp sockets.
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
David Forster [Wed, 3 Aug 2016 14:13:01 +0000 (15:13 +0100)]
ipv4: panic in leaf_walk_rcu due to stale node pointer
[ Upstream commit
94d9f1c5906b20053efe375b6d66610bca4b8b64 ]
Panic occurs when issuing "cat /proc/net/route" whilst
populating FIB with > 1M routes.
Use of cached node pointer in fib_route_get_idx is unsafe.
BUG: unable to handle kernel paging request at
ffffc90001630024
IP: [<
ffffffff814cf6a0>] leaf_walk_rcu+0x10/0xe0
PGD
11b08d067 PUD
11b08e067 PMD
dac4b067 PTE 0
Oops: 0000 [#1] SMP
Modules linked in: nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscac
snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep virti
acpi_cpufreq button parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd
tio_ring virtio floppy uhci_hcd ehci_hcd usbcore usb_common libata scsi_mod
CPU: 1 PID: 785 Comm: cat Not tainted 4.2.0-rc8+ #4
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
task:
ffff8800da1c0bc0 ti:
ffff88011a05c000 task.ti:
ffff88011a05c000
RIP: 0010:[<
ffffffff814cf6a0>] [<
ffffffff814cf6a0>] leaf_walk_rcu+0x10/0xe0
RSP: 0018:
ffff88011a05fda0 EFLAGS:
00010202
RAX:
ffff8800d8a40c00 RBX:
ffff8800da4af940 RCX:
ffff88011a05ff20
RDX:
ffffc90001630020 RSI:
0000000001013531 RDI:
ffff8800da4af950
RBP:
0000000000000000 R08:
ffff8800da1f9a00 R09:
0000000000000000
R10:
ffff8800db45b7e4 R11:
0000000000000246 R12:
ffff8800da4af950
R13:
ffff8800d97a74c0 R14:
0000000000000000 R15:
ffff8800d97a7480
FS:
00007fd3970e0700(0000) GS:
ffff88011fd00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
CR2:
ffffc90001630024 CR3:
000000011a7e4000 CR4:
00000000000006e0
Stack:
ffffffff814d00d3 0000000000000000 ffff88011a05ff20 ffff8800da1f9a00
ffffffff811dd8b9 0000000000000800 0000000000020000 00007fd396f35000
ffffffff811f8714 0000000000003431 ffffffff8138dce0 0000000000000f80
Call Trace:
[<
ffffffff814d00d3>] ? fib_route_seq_start+0x93/0xc0
[<
ffffffff811dd8b9>] ? seq_read+0x149/0x380
[<
ffffffff811f8714>] ? fsnotify+0x3b4/0x500
[<
ffffffff8138dce0>] ? process_echoes+0x70/0x70
[<
ffffffff8121cfa7>] ? proc_reg_read+0x47/0x70
[<
ffffffff811bb823>] ? __vfs_read+0x23/0xd0
[<
ffffffff811bbd42>] ? rw_verify_area+0x52/0xf0
[<
ffffffff811bbe61>] ? vfs_read+0x81/0x120
[<
ffffffff811bcbc2>] ? SyS_read+0x42/0xa0
[<
ffffffff81549ab2>] ? entry_SYSCALL_64_fastpath+0x16/0x75
Code: 48 85 c0 75 d8 f3 c3 31 c0 c3 f3 c3 66 66 66 66 66 66 2e 0f 1f 84 00 00
a 04 89 f0 33 02 44 89 c9 48 d3 e8 0f b6 4a 05 49 89
RIP [<
ffffffff814cf6a0>] leaf_walk_rcu+0x10/0xe0
RSP <
ffff88011a05fda0>
CR2:
ffffc90001630024
Signed-off-by: Dave Forster <dforster@brocade.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Jeff Mahoney [Tue, 2 Aug 2016 21:05:33 +0000 (14:05 -0700)]
reiserfs: fix "new_insert_key may be used uninitialized ..."
commit
0a11b9aae49adf1f952427ef1a1d9e793dd6ffb6 upstream.
new_insert_key only makes any sense when it's associated with a
new_insert_ptr, which is initialized to NULL and changed to a
buffer_head when we also initialize new_insert_key. We can key off of
that to avoid the uninitialized warning.
Link: http://lkml.kernel.org/r/5eca5ffb-2155-8df2-b4a2-f162f105efed@suse.com
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Sat, 24 Sep 2016 21:29:51 +0000 (23:29 +0200)]
Fix build warning in kernel/cpuset.c
> 2 ../kernel/cpuset.c:2101:11: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types]
> 1 ../kernel/cpuset.c:2101:2: warning: initialization from incompatible pointer type
> 1 ../kernel/cpuset.c:2101:2: warning: (near initialization for 'cpuset_cgrp_subsys.fork')
This got introduced by
06ec7a1d7646 ("cpuset: make sure new tasks
conform to the current config of the cpuset"). In the upstream
kernel, the function prototype was changed as of
b53202e63089
("cgroup: kill cgrp_ss_priv[CGROUP_CANFORK_COUNT] and friends").
That patch is not suitable for stable kernels, and fortunately
the warning seems harmless as the prototypes only differ in the
second argument that is unused. Adding that argument gets rid
of the warning:
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michal Nazarewicz [Sat, 16 Jan 2016 00:57:58 +0000 (16:57 -0800)]
include/linux/kernel.h: change abs() macro so it uses consistent return type
commit
8f57e4d930d48217268315898212518d4d3e0773 upstream.
Rewrite abs() so that its return type does not depend on the
architecture and no unexpected type conversion happen inside of it. The
only conversion is from unsigned to signed type. char is left as a
return type but treated as a signed type regradless of it's actual
signedness.
With the old version, int arguments were promoted to long and depending
on architecture a long argument might result in s64 or long return type
(which may or may not be the same).
This came after some back and forth with Nicolas. The current macro has
different return type (for the same input type) depending on
architecture which might be midly iritating.
An alternative version would promote to int like so:
#define abs(x) __abs_choose_expr(x, long long, \
__abs_choose_expr(x, long, \
__builtin_choose_expr( \
sizeof(x) <= sizeof(int), \
({ int __x = (x); __x<0?-__x:__x; }), \
((void)0))))
I have no preference but imagine Linus might. :] Nicolas argument against
is that promoting to int causes iconsistent behaviour:
int main(void) {
unsigned short a = 0, b = 1, c = a - b;
unsigned short d = abs(a - b);
unsigned short e = abs(c);
printf("%u %u\n", d, e); // prints: 1 65535
}
Then again, no sane person expects consistent behaviour from C integer
arithmetic. ;)
Note:
__builtin_types_compatible_p(unsigned char, char) is always false, and
__builtin_types_compatible_p(signed char, char) is also always false.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 24 Sep 2016 08:08:14 +0000 (10:08 +0200)]
Linux 4.4.22
Guenter Roeck [Sat, 17 Sep 2016 19:57:24 +0000 (12:57 -0700)]
openrisc: fix the fix of copy_from_user()
commit
8e4b72054f554967827e18be1de0e8122e6efc04 upstream.
Since commit
acb2505d0119 ("openrisc: fix copy_from_user()"),
copy_from_user() returns the number of bytes requested, not the
number of bytes not copied.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Fixes:
acb2505d0119 ("openrisc: fix copy_from_user()")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter Roeck [Sat, 17 Sep 2016 14:52:49 +0000 (07:52 -0700)]
avr32: fix 'undefined reference to `___copy_from_user'
commit
65c0044ca8d7c7bbccae37f0ff2972f0210e9f41 upstream.
avr32 builds fail with:
arch/avr32/kernel/built-in.o: In function `arch_ptrace':
(.text+0x650): undefined reference to `___copy_from_user'
arch/avr32/kernel/built-in.o:(___ksymtab+___copy_from_user+0x0): undefined
reference to `___copy_from_user'
kernel/built-in.o: In function `proc_doulongvec_ms_jiffies_minmax':
(.text+0x5dd8): undefined reference to `___copy_from_user'
kernel/built-in.o: In function `proc_dointvec_minmax_sysadmin':
sysctl.c:(.text+0x6174): undefined reference to `___copy_from_user'
kernel/built-in.o: In function `ptrace_has_cap':
ptrace.c:(.text+0x69c0): undefined reference to `___copy_from_user'
kernel/built-in.o:ptrace.c:(.text+0x6b90): more undefined references to
`___copy_from_user' follow
Fixes:
8630c32275ba ("avr32: fix copy_from_user()")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Fri, 19 Aug 2016 01:31:41 +0000 (21:31 -0400)]
ia64: copy_from_user() should zero the destination on access_ok() failure
commit
a5e541f796f17228793694d64b507f5f57db4cd7 upstream.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Gleixner [Mon, 4 Jul 2016 13:32:25 +0000 (15:32 +0200)]
genirq/msi: Fix broken debug output
commit
4364e1a29be16b2783c0bcbc263f61236af64281 upstream.
virq is not required to be the same for all msi descs. Use the base irq number
from the desc in the debug printk.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Sun, 21 Aug 2016 23:16:26 +0000 (19:16 -0400)]
ppc32: fix copy_from_user()
commit
224264657b8b228f949b42346e09ed8c90136a8e upstream.
should clear on access_ok() failures. Also remove the useless
range truncation logics.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Mon, 22 Aug 2016 04:23:07 +0000 (00:23 -0400)]
sparc32: fix copy_from_user()
commit
917400cecb4b52b5cde5417348322bb9c8272fa6 upstream.
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Sat, 20 Aug 2016 20:33:10 +0000 (16:33 -0400)]
mn10300: copy_from_user() should zero on access_ok() failure...
commit
ae7cc577ec2a4a6151c9e928fd1f595d953ecef1 upstream.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Sat, 20 Aug 2016 20:36:36 +0000 (16:36 -0400)]
nios2: copy_from_user() should zero the tail of destination
commit
e33d1f6f72cc82fcfc3d1fb20c9e3ad83b1928fa upstream.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Sat, 20 Aug 2016 21:05:21 +0000 (17:05 -0400)]
openrisc: fix copy_from_user()
commit
acb2505d0119033a80c85ac8d02dccae41271667 upstream.
... that should zero on faults. Also remove the <censored> helpful
logics wrt range truncation copied from ppc32. Where it had ever
been needed only in case of copy_from_user() *and* had not been merged
into the mainline until a month after the need had disappeared.
A decade before openrisc went into mainline, I might add...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Sat, 20 Aug 2016 23:03:37 +0000 (19:03 -0400)]
parisc: fix copy_from_user()
commit
aace880feea38875fbc919761b77e5732a3659ef upstream.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Fri, 19 Aug 2016 02:08:20 +0000 (22:08 -0400)]
metag: copy_from_user() should zero the destination on access_ok() failure
commit
8ae95ed4ae5fc7c3391ed668b2014c9e2079533b upstream.
Acked-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Wed, 17 Aug 2016 20:02:32 +0000 (16:02 -0400)]
alpha: fix copy_from_user()
commit
2561d309dfd1555e781484af757ed0115035ddb3 upstream.
it should clear the destination even when access_ok() fails.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Wed, 17 Aug 2016 20:36:37 +0000 (16:36 -0400)]
asm-generic: make copy_from_user() zero the destination properly
commit
2545e5da080b4839dd859e3b09343a884f6ab0e3 upstream.
... in all cases, including the failing access_ok()
Note that some architectures using asm-generic/uaccess.h have
__copy_from_user() not zeroing the tail on failure halfway
through. This variant works either way.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Sat, 20 Aug 2016 20:18:53 +0000 (16:18 -0400)]
mips: copy_from_user() must zero the destination on access_ok() failure
commit
e69d700535ac43a18032b3c399c69bf4639e89a2 upstream.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Fri, 19 Aug 2016 01:16:49 +0000 (21:16 -0400)]
hexagon: fix strncpy_from_user() error return
commit
f35c1e0671728d1c9abc405d05ef548b5fcb2fc4 upstream.
It's -EFAULT, not -1 (and contrary to the comment in there,
__strnlen_user() can return 0 - on faults).
Acked-by: Richard Kuo <rkuo@codeaurora.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Mon, 22 Aug 2016 03:39:47 +0000 (23:39 -0400)]
sh: fix copy_from_user()
commit
6e050503a150b2126620c1a1e9b3a368fcd51eac upstream.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Mon, 22 Aug 2016 02:30:44 +0000 (22:30 -0400)]
score: fix copy_from_user() and friends
commit
b615e3c74621e06cd97f86373ca90d43d6d998aa upstream.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Fri, 9 Sep 2016 23:16:58 +0000 (19:16 -0400)]
blackfin: fix copy_from_user()
commit
8f035983dd826d7e04f67b28acf8e2f08c347e41 upstream.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Thu, 18 Aug 2016 23:34:00 +0000 (19:34 -0400)]
cris: buggered copy_from_user/copy_to_user/clear_user
commit
eb47e0293baaa3044022059f1fa9ff474bfe35cb upstream.
* copy_from_user() on access_ok() failure ought to zero the destination
* none of those primitives should skip the access_ok() check in case of
small constant size.
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Fri, 19 Aug 2016 00:54:02 +0000 (20:54 -0400)]
frv: fix clear_user()
commit
3b8767a8f00cc6538ba6b1cf0f88502e2fd2eb90 upstream.
It should check access_ok(). Otherwise a bunch of places turn into
trivially exploitable rootholes.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Thu, 18 Aug 2016 03:19:01 +0000 (23:19 -0400)]
asm-generic: make get_user() clear the destination on errors
commit
9ad18b75c2f6e4a78ce204e79f37781f8815c0fa upstream.
both for access_ok() failures and for faults halfway through
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vineet Gupta [Fri, 19 Aug 2016 19:10:02 +0000 (12:10 -0700)]
ARC: uaccess: get_user to zero out dest in cause of fault
commit
05d9d0b96e53c52a113fd783c0c97c830c8dc7af upstream.
Al reported potential issue with ARC get_user() as it wasn't clearing
out destination pointer in case of fault due to bad address etc.
Verified using following
| {
| u32 bogus1 = 0xdeadbeef;
| u64 bogus2 = 0xdead;
| int rc1, rc2;
|
| pr_info("Orig values %x %llx\n", bogus1, bogus2);
| rc1 = get_user(bogus1, (u32 __user *)0x40000000);
| rc2 = get_user(bogus2, (u64 __user *)0x50000000);
| pr_info("access %d %d, new values %x %llx\n",
| rc1, rc2, bogus1, bogus2);
| }
| [ARCLinux]# insmod /mnt/kernel-module/qtn.ko
| Orig values
deadbeef dead
| access -14 -14, new values 0 0
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-snps-arc@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Mon, 22 Aug 2016 02:00:54 +0000 (22:00 -0400)]
s390: get_user() should zero on failure
commit
fd2d2b191fe75825c4c7a6f12f3fef35aaed7dd7 upstream.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Mon, 22 Aug 2016 02:13:39 +0000 (22:13 -0400)]
score: fix __get_user/get_user
commit
c2f18fa4cbb3ad92e033a24efa27583978ce9600 upstream.
* should zero on any failure
* __get_user() should use __copy_from_user(), not copy_from_user()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Sat, 20 Aug 2016 20:39:01 +0000 (16:39 -0400)]
nios2: fix __get_user()
commit
2e29f50ad5e23db37dde9be71410d95d50241ecd upstream.
a) should not leave crap on fault
b) should _not_ require access_ok() in any cases.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Mon, 22 Aug 2016 03:33:47 +0000 (23:33 -0400)]
sh64: failing __get_user() should zero
commit
c6852389228df9fb3067f94f3b651de2a7921b36 upstream.
It could be done in exception-handling bits in __get_user_b() et.al.,
but the surgery involved would take more knowledge of sh64 details
than I have or _want_ to have.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Fri, 9 Sep 2016 23:20:13 +0000 (19:20 -0400)]
m32r: fix __get_user()
commit
c90a3bc5061d57e7931a9b7ad14784e1a0ed497d upstream.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Sat, 20 Aug 2016 20:32:02 +0000 (16:32 -0400)]
mn10300: failing __get_user() and get_user() should zero
commit
43403eabf558d2800b429cd886e996fd555aa542 upstream.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Thu, 15 Sep 2016 01:35:29 +0000 (02:35 +0100)]
fix minor infoleak in get_user_ex()
commit
1c109fabbd51863475cd12ac206bdd249aee35af upstream.
get_user_ex(x, ptr) should zero x on failure. It's not a lot of a leak
(at most we are leaking uninitialized 64bit value off the kernel stack,
and in a fairly constrained situation, at that), but the fix is trivial,
so...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[ This sat in different branch from the uaccess fixes since mid-August ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Fri, 9 Sep 2016 23:22:34 +0000 (19:22 -0400)]
microblaze: fix copy_from_user()
commit
d0cf385160c12abd109746cad1f13e3b3e8b50b8 upstream.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Fri, 9 Sep 2016 23:28:23 +0000 (19:28 -0400)]
avr32: fix copy_from_user()
commit
8630c32275bac2de6ffb8aea9d9b11663e7ad28e upstream.
really ugly, but apparently avr32 compilers turns access_ok() into
something so bad that they want it in assembler. Left that way,
zeroing added in inline wrapper.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Fri, 9 Sep 2016 23:23:33 +0000 (19:23 -0400)]
microblaze: fix __get_user()
commit
e98b9e37ae04562d52c96f46b3cf4c2e80222dc1 upstream.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Thu, 15 Sep 2016 23:11:45 +0000 (00:11 +0100)]
fix iov_iter_fault_in_readable()
commit
d4690f1e1cdabb4d61207b6787b1605a0dc0aeab upstream.
... by turning it into what used to be multipages counterpart
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Boris Brezillon [Tue, 13 Sep 2016 13:58:29 +0000 (15:58 +0200)]
irqchip/atmel-aic: Fix potential deadlock in ->xlate()
commit
5eb0d6eb3fac3daa60d9190eed9fa41cf809c756 upstream.
aic5_irq_domain_xlate() and aic_irq_domain_xlate() take the generic chip
lock without disabling interrupts, which can lead to a deadlock if an
interrupt occurs while the lock is held in one of these functions.
Replace irq_gc_{lock,unlock}() calls by
irq_gc_{lock_irqsave,unlock_irqrestore}() ones to prevent this bug from
happening.
Fixes:
b1479ebb7720 ("irqchip: atmel-aic: Add atmel AIC/AIC5 drivers")
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Link: http://lkml.kernel.org/r/1473775109-4192-2-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Boris Brezillon [Tue, 13 Sep 2016 13:58:28 +0000 (15:58 +0200)]
genirq: Provide irq_gc_{lock_irqsave,unlock_irqrestore}() helpers
commit
ebf9ff753c041b296241990aef76163bbb2cc9c8 upstream.
Some irqchip drivers need to take the generic chip lock outside of the
irq context.
Provide the irq_gc_{lock_irqsave,unlock_irqrestore}() helpers to allow
one to disable irqs while entering a critical section protected by
gc->lock.
Note that we do not provide optimized version of these helpers for !SMP,
because they are not called from the hot-path.
[ tglx: Added a comment when these helpers should be [not] used ]
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Link: http://lkml.kernel.org/r/1473775109-4192-1-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kristian H. Kristensen [Tue, 13 Sep 2016 21:20:45 +0000 (14:20 -0700)]
drm: Only use compat ioctl for addfb2 on X86/IA64
commit
47a66e45d7a7613322549c2475ea9d809baaf514 upstream.
Similar to struct drm_update_draw, struct drm_mode_fb_cmd2 has an
unaligned 64 bit field (modifier). This get packed differently between
32 bit and 64 bit modes on architectures that can handle unaligned 64
bit access (X86 and IA64). Other architectures pack the structs the
same and don't need the compat wrapper. Use the same condition for
drm_mode_fb_cmd2 as we use for drm_update_draw.
Note that only the modifier will be packed differently between compat
and non-compat versions.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
[seanpaul added not at bottom of commit msg re: modifier]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1473801645-116011-1-git-send-email-hoegsberg@chromium.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Leupold [Wed, 6 Jul 2016 11:22:35 +0000 (13:22 +0200)]
drm: atmel-hlcdc: Fix vertical scaling
commit
d31ed3f05763644840c654a384eaefa94c097ba2 upstream.
The code is applying the same scaling for the X and Y components,
thus making the scaling feature only functional when both components
have the same scaling factor.
Do the s/_w/_h/ replacement where appropriate to fix vertical scaling.
Signed-off-by: Jan Leupold <leupold@rsi-elektrotechnik.de>
Fixes:
1a396789f65a2 ("drm: add Atmel HLCDC Display Controller support")
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Fri, 22 Jan 2016 10:43:44 +0000 (11:43 +0100)]
net: simplify napi_synchronize() to avoid warnings
commit
facc432faa59414bd7c60c307ff1645154a66c98 upstream.
The napi_synchronize() function is defined twice: The definition
for SMP builds waits for other CPUs to be done, while the uniprocessor
variant just contains a barrier and ignores its argument.
In the mvneta driver, this leads to a warning about an unused variable
when we lookup the NAPI struct of another CPU and then don't use it:
ethernet/marvell/mvneta.c: In function 'mvneta_percpu_notifier':
ethernet/marvell/mvneta.c:2910:30: error: unused variable 'other_port' [-Werror=unused-variable]
There are no other CPUs on a UP build, so that code never runs, but
gcc does not know this.
The nicest solution seems to be to turn the napi_synchronize() helper
into an inline function for the UP case as well, as that leads gcc to
not complain about the argument being unused. Once we do that, we can
also combine the two cases into a single function definition and use
if(IS_ENABLED()) rather than #ifdef to make it look a bit nicer.
The warning first came up in linux-4.4, but I failed to catch it
earlier.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes:
f86428854480 ("net: mvneta: Statically assign queues to CPUs")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Thu, 1 Sep 2016 23:14:47 +0000 (16:14 -0700)]
kconfig: tinyconfig: provide whole choice blocks to avoid warnings
commit
236dec051078a8691950f56949612b4b74107e48 upstream.
Using "make tinyconfig" produces a couple of annoying warnings that show
up for build test machines all the time:
.config:966:warning: override: NOHIGHMEM changes choice state
.config:965:warning: override: SLOB changes choice state
.config:963:warning: override: KERNEL_XZ changes choice state
.config:962:warning: override: CC_OPTIMIZE_FOR_SIZE changes choice state
.config:933:warning: override: SLOB changes choice state
.config:930:warning: override: CC_OPTIMIZE_FOR_SIZE changes choice state
.config:870:warning: override: SLOB changes choice state
.config:868:warning: override: KERNEL_XZ changes choice state
.config:867:warning: override: CC_OPTIMIZE_FOR_SIZE changes choice state
I've made a previous attempt at fixing them and we discussed a number of
alternatives.
I tried changing the Makefile to use "merge_config.sh -n
$(fragment-list)" but couldn't get that to work properly.
This is yet another approach, based on the observation that we do want
to see a warning for conflicting 'choice' options, and that we can
simply make them non-conflicting by listing all other options as
disabled. This is a trivial patch that we can apply independent of
plans for other changes.
Link: http://lkml.kernel.org/r/20160829214952.1334674-2-arnd@arndb.de
Link: https://storage.kernelci.org/mainline/v4.7-rc6/x86-tinyconfig/build.log
https://patchwork.kernel.org/patch/
9212749/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Sun, 17 Jan 2016 00:02:56 +0000 (01:02 +0100)]
soc: qcom/spm: shut up uninitialized variable warning
commit
00affcac69c7aae6c2cfcbc71f724e1c16d0b445 upstream.
gcc warns about the 'found' variable possibly being used uninitialized:
drivers/soc/qcom/spm.c: In function 'spm_dev_probe':
drivers/soc/qcom/spm.c:305:5: error: 'found' may be used uninitialized in this function [-Werror=maybe-uninitialized]
However, the code is correct because we know that there is
always at least one online CPU. This initializes the 'found'
variable to zero before the loop so the compiler knows
it does not have to warn about it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Wed, 18 Nov 2015 15:21:17 +0000 (16:21 +0100)]
pinctrl: at91-pio4: use %pr format string for resource
commit
32844138e31347fc0f61d3bf2d7b9c4583f189e3 upstream.
resource_size_t may be defined as 32 or 64 bit depending on configuration,
so it cannot be printed using the normal format strings, as gcc correctly
warns:
pinctrl-at91-pio4.c: In function 'atmel_pinctrl_probe':
pinctrl-at91-pio4.c:1003:41: warning: format '%u' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t {aka long long unsigned int}' [-Wformat=]
dev_dbg(dev, "bank %i: hwirq=%u\n", i, res->start);
This changes the format string to use the special "%pr" format
string that prints a resource, and changes the arguments so we
the resource structure directly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Thu, 12 Nov 2015 14:14:23 +0000 (15:14 +0100)]
mmc: dw_mmc: use resource_size_t to store physical address
commit
260b31643691e8a58683a4ccc3bdf7abfd86f54a upstream.
The dw_mmc driver stores the physical address of the MMIO registers
in a pointer, which requires the use of type casts, and is actually
broken if anyone ever has this device on a 32-bit SoC in registers
above 4GB. Gcc warns about this possibility when the driver is built
with ARM LPAE enabled:
mmc/host/dw_mmc.c: In function 'dw_mci_edmac_start_dma':
mmc/host/dw_mmc.c:702:17: warning: cast from pointer to integer of different size
cfg.dst_addr = (dma_addr_t)(host->phy_regs + fifo_offset);
^
mmc/host/dw_mmc-pltfm.c: In function 'dw_mci_pltfm_register':
mmc/host/dw_mmc-pltfm.c:63:19: warning: cast to pointer from integer of different size
host->phy_regs = (void *)(regs->start);
This changes the code to use resource_size_t, which gets rid of the
warning, the bug and the useless casts.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mika Kuoppala [Fri, 30 Oct 2015 11:26:15 +0000 (13:26 +0200)]
drm/i915: Avoid pointer arithmetic in calculating plane surface offset
commit
44eb0cb9620c6a53ec8e7073262e2af8079b727f upstream.
VMA offsets are 64 bits. Plane surface offsets are in ggtt and
the hardware register to set this is thus 32 bits. Be explicit
about these and convert carefully to from vma to final size.
This will make sparse happy by not creating 32bit pointers out
of 64bit vma offsets.
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1446204375-29831-1-git-send-email-mika.kuoppala@intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Danese [Fri, 20 May 2016 04:54:51 +0000 (21:54 -0700)]
mpssd: fix buffer overflow warning
commit
3610a2add39365a0f153154c60169a66c616d50f upstream.
The compilation emits a warning in function ‘snprintf’,
inlined from ‘set_cmdline’ at
../Documentation/mic/mpssd/mpssd.c:1541:9:
/usr/include/x86_64-linux-gnu/bits/stdio2.h:64:10:
warning: call to __builtin___snprintf_chk will always overflow
destination buffer
This was introduced in commit
f4a66c204482 ("misc: mic: Update MIC host
daemon with COSM changes") and is fixed by reverting the changes to the
size argument of these snprintf statements.
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mike Danese <mikedanese@google.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Mon, 4 Apr 2016 19:38:46 +0000 (12:38 -0700)]
gma500: remove annoying deprecation warning
commit
166c5a6ef765653848161e6f4af81c05e4b3ecf6 upstream.
In commit
e45708976aea ("drm/dp-helper: Move the legacy helpers to
gma500") the legacy i2c helpers were moved to the only remaining user of
them, the gma500 driver. Together with that move, i2c_dp_aux_add_bus()
was marked deprecated and started warning about its remaining use.
It's now been a year and a half of annoying warning, and apparently
nobody cares enough about gma500 to try to move it along to the more
modern models.
Get rid of the warning - if even the gma500 people don't care enough,
then they should certainly not spam other innocent developers with a
warning that might hide other, much more real issues.
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun [Mon, 5 Sep 2016 08:06:31 +0000 (16:06 +0800)]
ipv6: addrconf: fix dev refcont leak when DAD failed
commit
751eb6b6042a596b0080967c1a529a9fe98dac1d upstream.
In general, when DAD detected IPv6 duplicate address, ifp->state
will be set to INET6_IFADDR_STATE_ERRDAD and DAD is stopped by a
delayed work, the call tree should be like this:
ndisc_recv_ns
-> addrconf_dad_failure <- missing ifp put
-> addrconf_mod_dad_work
-> schedule addrconf_dad_work()
-> addrconf_dad_stop() <- missing ifp hold before call it
addrconf_dad_failure() called with ifp refcont holding but not put.
addrconf_dad_work() call addrconf_dad_stop() without extra holding
refcount. This will not cause any issue normally.
But the race between addrconf_dad_failure() and addrconf_dad_work()
may cause ifp refcount leak and netdevice can not be unregister,
dmesg show the following messages:
IPv6: eth0: IPv6 duplicate address fe80::XX:XXXX:XXXX:XX detected!
...
unregister_netdevice: waiting for eth0 to become free. Usage count = 1
Fixes:
c15b1ccadb32 ("ipv6: move DAD and addrconf_verify processing
to workqueue")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Balbir Singh [Mon, 5 Sep 2016 03:16:40 +0000 (13:16 +1000)]
sched/core: Fix a race between try_to_wake_up() and a woken up task
commit
135e8c9250dd5c8c9aae5984fde6f230d0cbfeaf upstream.
The origin of the issue I've seen is related to
a missing memory barrier between check for task->state and
the check for task->on_rq.
The task being woken up is already awake from a schedule()
and is doing the following:
do {
schedule()
set_current_state(TASK_(UN)INTERRUPTIBLE);
} while (!cond);
The waker, actually gets stuck doing the following in
try_to_wake_up():
while (p->on_cpu)
cpu_relax();
Analysis:
The instance I've seen involves the following race:
CPU1 CPU2
while () {
if (cond)
break;
do {
schedule();
set_current_state(TASK_UN..)
} while (!cond);
wakeup_routine()
spin_lock_irqsave(wait_lock)
raw_spin_lock_irqsave(wait_lock) wake_up_process()
} try_to_wake_up()
set_current_state(TASK_RUNNING); ..
list_del(&waiter.list);
CPU2 wakes up CPU1, but before it can get the wait_lock and set
current state to TASK_RUNNING the following occurs:
CPU3
wakeup_routine()
raw_spin_lock_irqsave(wait_lock)
if (!list_empty)
wake_up_process()
try_to_wake_up()
raw_spin_lock_irqsave(p->pi_lock)
..
if (p->on_rq && ttwu_wakeup())
..
while (p->on_cpu)
cpu_relax()
..
CPU3 tries to wake up the task on CPU1 again since it finds
it on the wait_queue, CPU1 is spinning on wait_lock, but immediately
after CPU2, CPU3 got it.
CPU3 checks the state of p on CPU1, it is TASK_UNINTERRUPTIBLE and
the task is spinning on the wait_lock. Interestingly since p->on_rq
is checked under pi_lock, I've noticed that try_to_wake_up() finds
p->on_rq to be 0. This was the most confusing bit of the analysis,
but p->on_rq is changed under runqueue lock, rq_lock, the p->on_rq
check is not reliable without this fix IMHO. The race is visible
(based on the analysis) only when ttwu_queue() does a remote wakeup
via ttwu_queue_remote. In which case the p->on_rq change is not
done uder the pi_lock.
The result is that after a while the entire system locks up on
the raw_spin_irqlock_save(wait_lock) and the holder spins infintely
Reproduction of the issue:
The issue can be reproduced after a long run on my system with 80
threads and having to tweak available memory to very low and running
memory stress-ng mmapfork test. It usually takes a long time to
reproduce. I am trying to work on a test case that can reproduce
the issue faster, but thats work in progress. I am still testing the
changes on my still in a loop and the tests seem OK thus far.
Big thanks to Benjamin and Nick for helping debug this as well.
Ben helped catch the missing barrier, Nick caught every missing
bit in my theory.
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
[ Updated comment to clarify matching barriers. Many
architectures do not have a full barrier in switch_to()
so that cannot be relied upon. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <nicholas.piggin@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/e02cce7b-d9ca-1ad0-7a61-ea97c7582b37@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Berg [Mon, 8 Aug 2016 06:45:33 +0000 (08:45 +0200)]
Revert "wext: Fix 32 bit iwpriv compatibility issue with 64 bit Kernel"
commit
4d0bd46a4d55383f7b925e6cf7865a77e0f0e020 upstream.
This reverts commit
3d5fdff46c4b2b9534fa2f9fc78e90a48e0ff724.
Ben Hutchings pointed out that the commit isn't safe since it assumes
that the structure used by the driver is iw_point, when in fact there's
no way to know about that.
Fortunately, the only driver in the tree that ever runs this code path
is the wilc1000 staging driver, so it doesn't really matter.
Clearly I should have investigated this better before applying, sorry.
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Fixes:
3d5fdff46c4b ("wext: Fix 32 bit iwpriv compatibility issue with 64 bit Kernel")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felix Fietkau [Fri, 19 Aug 2016 10:37:46 +0000 (13:37 +0300)]
ath9k: fix using sta->drv_priv before initializing it
commit
7711aaf08ad3fc4d0e937eec1de0a63620444ce7 upstream.
A station pointer can be passed to the driver on tx, before it has been
marked as associated. Since ath9k_sta_state was initializing the entry
too late, it resulted in some spurious crashes.
Fixes:
df3c6eb34da5 ("ath9k: Use sta_state() callback")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guoqing Jiang [Mon, 5 Sep 2016 02:17:28 +0000 (22:17 -0400)]
md-cluster: make md-cluster also can work when compiled into kernel
commit
47a7b0d8888c04c9746812820b6e60553cc77bbc upstream.
The md-cluster is compiled as module by default,
if it is compiled by built-in way, then we can't
make md-cluster works.
[64782.630008] md/raid1:md127: active with 2 out of 2 mirrors
[64782.630528] md-cluster module not found.
[64782.630530] md127: Could not setup cluster service (-2)
Fixes:
edb39c9 ("Introduce md_cluster_operations to handle cluster functions")
Reported-by: Marc Smith <marc.smith@mcc.edu>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathias Nyman [Wed, 7 Sep 2016 14:26:33 +0000 (17:26 +0300)]
xhci: fix null pointer dereference in stop command timeout function
commit
bcf42aa60c2832510b9be0f30c090bfd35bb172d upstream.
The stop endpoint command has its own 5 second timeout timer.
If the timeout function is triggered between USB3 and USB2 host
removal it will try to call usb_hc_died(xhci_to_hcd(xhci)->primary_hcd)
the ->primary_hcd will be set to NULL at USB3 hcd removal.
Fix this by first checking if the PCI host is being removed, and
also by using only xhci_to_hcd() as it will always return the primary
hcd.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miklos Szeredi [Wed, 24 Aug 2016 16:17:04 +0000 (18:17 +0200)]
fuse: direct-io: don't dirty ITER_BVEC pages
commit
8fba54aebbdf1f999738121922e74bf796ad60ee upstream.
When reading from a loop device backed by a fuse file it deadlocks on
lock_page().
This is because the page is already locked by the read() operation done on
the loop device. In this case we don't want to either lock the page or
dirty it.
So do what fs/direct-io.c does: only dirty the page for ITER_IOVEC vectors.
Reported-by: Sheng Yang <sheng@yasker.org>
Fixes:
aa4d86163e4e ("block: loop: switch to VFS ITER_BVEC")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Sheng Yang <sheng@yasker.org>
Reviewed-by: Ashish Samant <ashish.samant@oracle.com>
Tested-by: Sheng Yang <sheng@yasker.org>
Tested-by: Ashish Samant <ashish.samant@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Mason [Tue, 6 Sep 2016 12:37:40 +0000 (05:37 -0700)]
Btrfs: remove root_log_ctx from ctx list before btrfs_sync_log returns
commit
cbd60aa7cd17d81a434234268c55192862147439 upstream.
We use a btrfs_log_ctx structure to pass information into the
tree log commit, and get error values out. It gets added to a per
log-transaction list which we walk when things go bad.
Commit
d1433debe added an optimization to skip waiting for the log
commit, but didn't take root_log_ctx out of the list. This
patch makes sure we remove things before exiting.
Signed-off-by: Chris Mason <clm@fb.com>
Fixes:
d1433debe7f4346cf9fc0dafc71c3137d2a97bc4
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>