OSDN Git Service
Damien Lespiau [Fri, 15 Aug 2014 15:48:36 +0000 (16:48 +0100)]
drm/i915/bdw: Disable execlists by default
We still have a few missing bits and pieces to have execlists enabled by
default eg. the error capture or the render state initialization and so
it wouldn't be wise to enable it by default on BDW just yet.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thomas Daniel <thomas.daniel@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82740
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:49 +0000 (17:04 +0100)]
drm/i915/bdw: Enable Logical Ring Contexts (hence, Execlists)
The time has come, the Walrus said, to talk of many things.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:48 +0000 (17:04 +0100)]
drm/i915/bdw: Document Logical Rings, LR contexts and Execlists
Add theory of operation notes to intel_lrc.c and comments to externally
visible functions.
v2: Add notes on logical ring context creation.
v3: Use kerneldoc.
v4: Integrate it in the DocBook template.
Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> (v1)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> (v2, v3)
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Drop hunk about render ring init function since that's not
yet merged.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Thu, 7 Aug 2014 12:24:26 +0000 (13:24 +0100)]
drm/i915/bdw: Print context state in debugfs
This has turned out to be really handy in debug so far.
Update:
Since writing this patch, I've gotten similar code upstream for error
state. I've used it quite a bit in debugfs however, and I'd like to keep
it here at least until preemption is working.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
This patch was accidentally dropped in the first Execlists version, and
it has been very useful indeed. Put it back again, but as a standalone
debugfs file.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
v2: Take the device struct_mutex rather than mode_config mutex for
atomic state capture.
Signed-off-by: Thomas Daniel <thomas.daniel@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:46 +0000 (17:04 +0100)]
drm/i915/bdw: Display context backing obj & ringbuffer info in debugfs
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Checkpatch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 7 Aug 2014 12:23:20 +0000 (13:23 +0100)]
drm/i915/bdw: Display execlists info in debugfs
v2: Warn and return if LRCs are not enabled.
v3: Grab the Execlists spinlock (noticed by Daniel Vetter).
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
v4: Lock the struct mutex for atomic state capture
Signed-off-by: Thomas Daniel <thomas.daniel@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Checkpatch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:44 +0000 (17:04 +0100)]
drm/i915/bdw: Disable semaphores for Execlists
Up until recently, semaphores weren't enabled in BDW so we didn't care
about them. But then Rodrigo came and enabled them:
commit
521e62e49a42661a4ee0102644517dbe2f100a23
Author: Rodrigo Vivi <rodrigo.vivi@intel.com>
drm/i915: Enable semaphores on BDW
So now we have to explicitly disable them for Execlists until both
features play nicely.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:42 +0000 (17:04 +0100)]
drm/i915/bdw: Make sure gpu reset still works with Execlists
If we reset a ring after a hang, we have to make sure that we clear
out all queued Execlists requests.
v2: The ring is, at this point, already being correctly re-programmed
for Execlists, and the hangcheck counters cleared.
v3: Daniel suggests to drop the "if (execlists)" because the Execlists
queue should be empty in legacy mode (which is true, if we do the
INIT_LIST_HEAD).
v4: Do the pending intel_runtime_pm_put
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Fri, 15 Aug 2014 11:01:31 +0000 (12:01 +0100)]
drm/i915/bdw: Don't write PDP in the legacy way when using LRCs
This is mostly for correctness so that we know we are running the LR
context correctly (this is, the PDPs are contained inside the context
object).
v2: Move the check to inside the enable PPGTT function. The switch
happens in two places: the legacy context switch (that we won't hit
when Execlists are enabled) and the PPGTT enable, which unfortunately
we need. This would look much nicer if the ppgtt->enable was part of
the ring init, where it logically belongs.
v3: Move the check to the start of the enable PPGTT function. None
of the legacy PPGTT enabling is required when using LRCs as the
PPGTT is enabled in the context descriptor and the PDPs are written
in the LRC.
v4: Clarify comment based on review feedback.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Thomas Daniel <thomas.daniel@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Resolve conflicts with ppgtt_enable rework.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 8 Aug 2014 18:27:01 +0000 (20:27 +0200)]
drm/i915: Track cursor changes as frontbuffer tracking flushes
We treat other plane updates in the same fashion. Spotted because
Rodrigo kept reporting a bug in the PSR code where the frontbuffer was
eternally stuck with a dirty cursor bit set.
The psr testcase should have caught this, but that i-g-t is kaputt.
Rodrigo is signed up to fix that.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by-and-Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:41 +0000 (17:04 +0100)]
drm/i915/bdw: Help out the ctx switch interrupt handler
If we receive a storm of requests for the same context (see gem_storedw_loop_*)
we might end up iterating over too many elements in interrupt time, looking for
contexts to squash together. Instead, share the burden by giving more
intelligence to the queue function. At most, the interrupt will iterate over
three elements.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Checkpatch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:40 +0000 (17:04 +0100)]
drm/i915/bdw: Avoid non-lite-restore preemptions
In the current Execlists feeding mechanism, full preemption is not
supported yet: only lite-restores are allowed (this is: the GPU
simply samples a new tail pointer for the context currently in
execution).
But we have identified an scenario in which a full preemption occurs:
1) We submit two contexts for execution (A & B).
2) The GPU finishes with the first one (A), switches to the second one
(B) and informs us.
3) We submit B again (hoping to cause a lite restore) together with C,
but in the time we spend writing to the ELSP, the GPU finishes B.
4) The GPU start executing B again (since we told it so).
5) We receive a B finished interrupt and, mistakenly, we submit C (again)
and D, causing a full preemption of B.
The race is avoided by keeping track of how many times a context has been
submitted to the hardware and by better discriminating the received context
switch interrupts: in the example, when we have submitted B twice, we won´t
submit C and D as soon as we receive the notification that B is completed
because we were expecting to get a LITE_RESTORE and we didn´t, so we know a
second completion will be received shortly.
Without this explicit checking, somehow, the batch buffer execution order
gets messed with. This can be verified with the IGT test I sent together with
the series. I don´t know the exact mechanism by which the pre-emption messes
with the execution order but, since other people is working on the Scheduler
+ Preemption on Execlists, I didn´t try to fix it. In these series, only Lite
Restores are supported (other kind of preemptions WARN).
v2: elsp_submitted belongs in the new intel_ctx_submit_request. Several
rebase changes.
v3: Clarify how the race is avoided, as requested by Daniel.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Align function parameters ...]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Thomas Daniel [Thu, 24 Jul 2014 16:04:39 +0000 (17:04 +0100)]
drm/i915/bdw: Handle context switch events
Handle all context status events in the context status buffer on every
context switch interrupt. We only remove work from the execlist queue
after a context status buffer reports that it has completed and we only
attempt to schedule new contexts on interrupt when a previously submitted
context completes (unless no contexts are queued, which means the GPU is
free).
We canot call intel_runtime_pm_get() in an interrupt (or with a spinlock
grabbed, FWIW), because it might sleep, which is not a nice thing to do.
Instead, do the runtime_pm get/put together with the create/destroy request,
and handle the forcewake get/put directly.
Signed-off-by: Thomas Daniel <thomas.daniel@intel.com>
v2: Unreferencing the context when we are freeing the request might free
the backing bo, which requires the struct_mutex to be grabbed, so defer
unreferencing and freeing to a bottom half.
v3:
- Ack the interrupt inmediately, before trying to handle it (fix for
missing interrupts by Bob Beckett <robert.beckett@intel.com>).
- Update the Context Status Buffer Read Pointer, just in case (spotted
by Damien Lespiau).
v4: New namespace and multiple rebase changes.
v5: Squash with "drm/i915/bdw: Do not call intel_runtime_pm_get() in an
interrupt", as suggested by Daniel.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Checkpatch ...]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Michel Thierry [Thu, 24 Jul 2014 16:04:38 +0000 (17:04 +0100)]
drm/i915/bdw: Two-stage execlist submit process
Context switch (and execlist submission) should happen only when
other contexts are not active, otherwise pre-emption occurs.
To assure this, we place context switch requests in a queue and those
request are later consumed when the right context switch interrupt is
received (still TODO).
v2: Use a spinlock, do not remove the requests on unqueue (wait for
context switch completion).
Signed-off-by: Thomas Daniel <thomas.daniel@intel.com>
v3: Several rebases and code changes. Use unique ID.
v4:
- Move the queue/lock init to the late ring initialization.
- Damien's kmalloc review comments: check return, use sizeof(*req),
do not cast.
v5:
- Do not reuse drm_i915_gem_request. Instead, create our own.
- New namespace.
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v1)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> (v2-v5)
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[davnet: Checkpatch + wash-up s/BUG_ON/WARN_ON/.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:37 +0000 (17:04 +0100)]
drm/i915/bdw: Write the tail pointer, LRC style
Each logical ring context has the tail pointer in the context object,
so update it before submission.
v2: New namespace.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Thu, 24 Jul 2014 16:04:36 +0000 (17:04 +0100)]
drm/i915/bdw: Implement context switching (somewhat)
A context switch occurs by submitting a context descriptor to the
ExecList Submission Port. Given that we can now initialize a context,
it's possible to begin implementing the context switch by creating the
descriptor and submitting it to ELSP (actually two, since the ELSP
has two ports).
The context object must be mapped in the GGTT, which means it must exist
in the 0-4GB graphics VA range.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
v2: This code has changed quite a lot in various rebases. Of particular
importance is that now we use the globally unique Submission ID to send
to the hardware. Also, context pages are now pinned unconditionally to
GGTT, so there is no need to bind them.
v3: Use LRCA[31:12] as hwCtxId[19:0]. This guarantees that the HW context
ID we submit to the ELSP is globally unique and != 0 (Bspec requirements
of the software use-only bits of the Context ID in the Context Descriptor
Format) without the hassle of the previous submission Id construction.
Also, re-add the ELSP porting read (it was dropped somewhere during the
rebases).
v4:
- Squash with "drm/i915/bdw: Add forcewake lock around ELSP writes" (BSPEC
says: "SW must set Force Wakeup bit to prevent GT from entering C6 while
ELSP writes are in progress") as noted by Thomas Daniel
(thomas.daniel@intel.com).
- Rename functions and use an execlists/intel_execlists_ namespace.
- The BUG_ON only checked that the LRCA was <32 bits, but it didn't make
sure that it was properly aligned. Spotted by Alistair Mcaulay
<alistair.mcaulay@intel.com>.
v5:
- Improved source code comments as suggested by Chris Wilson.
- No need to abstract submit_ctx away, as pointed by Brad Volkin.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Checkpatch. Sigh.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:29 +0000 (17:04 +0100)]
drm/i915/bdw: Emission of requests with logical rings
On a previous iteration of this patch, I created an Execlists
version of __i915_add_request and asbtracted it away as a
vfunc. Daniel Vetter wondered then why that was needed:
"with the clean split in command submission I expect every
function to know wether it'll submit to an lrc (everything in
intel_lrc.c) or wether it'll submit to a legacy ring (existing
code), so I don't see a need for an add_request vfunc."
The honest, hairy truth is that this patch is the glue keeping
the whole logical ring puzzle together:
- i915_add_request is used by intel_ring_idle, which in turn is
used by i915_gpu_idle, which in turn is used in several places
inside the eviction and gtt codes.
- Also, it is used by i915_gem_check_olr, which is littered all
over i915_gem.c
- ...
If I were to duplicate all the code that directly or indirectly
uses __i915_add_request, I'll end up creating a separate driver.
To show the differences between the existing legacy version and
the new Execlists one, this time I have special-cased
__i915_add_request instead of adding an add_request vfunc. I
hope this helps to untangle this Gordian knot.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Adjust to ringbuf->FIXME_lrc_ctx per the discussion with
Thomas Daniel.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:16 +0000 (17:04 +0100)]
drm/i915: Add temporary ring->ctx backpointer
The execlist patches have a bit a convoluted and long history and due
to that have the actual submission still misplaced deeply burried in
the low-level ringbuffer handling code. This design goes back to the
legacy ringbuffer code with its tricky lazy request and simple work
submissiion using ring tail writes. For that reason they need a
ring->ctx backpointer.
The goal is to unburry that code and move it up into a level where the
full execlist context is available so that we can ditch this
backpointer. Until that's done make it really obvious that there's
work still to be done.
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Thomas Daniel <thomas.daniel@intel.com>
Acked-by: Thomas Daniel <thomas.daniel@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Tue, 12 Aug 2014 19:05:47 +0000 (20:05 +0100)]
drm/i915: Print captured bo for all VM in error state
The current error state harks back to the era of just a single VM. For
full-ppgtt, we capture every bo on every VM. It behoves us to then print
every bo for every VM, which we currently fail to do and so miss vital
information in the error state.
v2: Use the vma address rather than -1!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Sagar Kamble [Wed, 13 Aug 2014 17:37:06 +0000 (23:07 +0530)]
drm/i915: Sharing platform specific sequence between runtime and system suspend/ resume paths
On VLV, post S0i3 during i915_drm_thaw following issue is observed during ring
initialization.
[ 335.604039] [drm:stop_ring] ERROR render ring :timed out trying to stop ring
[ 336.607340] [drm:stop_ring] ERROR render ring :timed out trying to stop ring
[ 336.607345] [drm:init_ring_common] ERROR failed to set render ring head to zero ctl
00000000 head
00000000 tail
00000000 start
00000000
[ 337.610645] [drm:stop_ring] ERROR bsd ring :timed out trying to stop ring
[ 338.613952] [drm:stop_ring] ERROR bsd ring :timed out trying to stop ring
[ 338.613956] [drm:init_ring_common] ERROR failed to set bsd ring head to zero ctl
00000000 head
00000000 tail
00000000 start
00000000
[ 339.617256] [drm:stop_ring] ERROR render ring :timed out trying to stop ring
[ 339.617258] -----------[ cut here ]-----------
[ 339.617267] WARNING: CPU: 0 PID: 6 at drivers/gpu/drm/i915/intel_ringbuffer.c:1666 intel_cleanup_ring+0xe6/0xf0()
[ 339.617396] --[ end trace
5ef5ed1a3c92e2a6 ]--
[ 339.617428] [drm:__i915_drm_thaw] ERROR failed to re-initialize GPU, declaring wedged!
This is happening since wake is not enabled and Gunit registers are not restored.
For this system suspend/resume paths need to follow save/restore and additional
platform specific setup in suspend_complete and resume_prepare.
suspend_complete is shared unconditionaly for VLV, HSW, BDW. resume_prepare for
HSW and BDW has pc8 disabling which is needed during thaw_early so sharing
uncondtionally. For VLV and SNB runtime resume specific sequence exists.
Cc: Imre Deak <imre.deak@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Goel, Akash <akash.goel@intel.com>
Signed-off-by: Sagar Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Sagar Kamble [Wed, 13 Aug 2014 17:37:05 +0000 (23:07 +0530)]
drm/i915: Created common handler for platform specific suspend/resume
With this change, intel_runtime_suspend and intel_runtime_resume functions
become completely platform agnostic. Platform specific suspend/resume
changes are moved to intel_suspend_complete and intel_resume_prepare.
Cc: Imre Deak <imre.deak@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Goel, Akash <akash.goel@intel.com>
Signed-off-by: Sagar Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Wed, 13 Aug 2014 12:09:46 +0000 (13:09 +0100)]
drm/i915: Localise the fbdev console lock frobbing
Rather than take and release the console_lock() around a non-existent
DRM_I915_FBDEV, move the lock acquisation into the callee where it will
be compiled out by the config option entirely. This includes moving the
deferred fb_set_suspend() dance and encapsulating it entirely within
intel_fbdev.c.
v2: Use an integral work item so that we can explicitly flush the work
upon suspend/unload.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Add the flush_work in fbdev_fini per the mailing list
discussion. And s/BUG_ON/WARN_ON/ because.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Wed, 13 Aug 2014 11:14:12 +0000 (12:14 +0100)]
drm/i915: Replace __I915__ with typesafe variant
Ville pointed out the GCCism __builtin_types_compatible_p() that we
could use to replace our heavily casted presumption __I915__ macro that
was based on comparing struct sizes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Wed, 13 Aug 2014 08:57:05 +0000 (11:57 +0300)]
drm/i915: Add support for variable cursor size on 845/865
845/865 support different cursor sizes as well, albeit a bit differently
than later platforms. Add the necessary code to make them work.
Untested due to lack of hardware.
v2: Warn but accept invalid stride (Chris)
Rewrite the cursor size checks for other platforms (Chris)
v3: More polish and magic to the cursor size checks (Chris)
v4: Moar polish and a comment (Chris)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 12 Aug 2014 16:39:54 +0000 (19:39 +0300)]
drm/i915: Unify ivb_update_cursor() and i9xx_update_cursor()
Ever since
commit
5efb3e2838536832c9b6872512e6b6daf592cee9
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Wed Apr 9 13:28:53 2014 +0300
drm/i915/chv: Add cursor pipe offsets
the only difference between i9xx_update_cursor() and ivb_update_cursor()
was the hsw+ pipe csc handling. Let's unify them and we can rid
outselves of some duplicated code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 12 Aug 2014 16:39:53 +0000 (19:39 +0300)]
drm/i915: Move CURSIZE setup to i845_update_cursor()
CURSIZE register exists on 845/865 only, so move it to
i845_update_cursor(). Changes to cursor size must be done only when the
cursor is disabled, so do the write just before enabling the cursor.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 12 Aug 2014 16:39:52 +0000 (19:39 +0300)]
drm/i915: Don't try to enable cursor from setplane when crtc is disabled
Make sure the cursor gets fully clipped when enabling it on a disabled
crtc via setplane. This will prevent the lower level code from
attempting to enable the cursor in hardware.
Cc: Paulo Zanoni <przanoni@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 6 Aug 2014 13:04:57 +0000 (15:04 +0200)]
drm/i915: Cleanup aliasging ppgtt alongside the global gtt
Also remove related WARN_ONs which seem to have been hit since a rather
long time. But apperently no one noticed since our module reload is
already WARNING-infested :(
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 6 Aug 2014 13:04:56 +0000 (15:04 +0200)]
drm/i915: Extract commmon global gtt cleanup code
We want to move the aliasing ppgtt cleanup back into the global
gtt cleanup code for symmetry, but first we need to create such
a place.
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 6 Aug 2014 13:04:55 +0000 (15:04 +0200)]
drm/i915: Extract common cleanup into i915_ppgtt_release
Address space cleanup isn't really a job for the low-level cleanup
callbacks. Without this change we can't reuse the low-level cleanup
callback for the aliasing ppgtt cleanup.
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 6 Aug 2014 13:04:54 +0000 (15:04 +0200)]
drm/i915: Drop create_vm argument to i915_gem_create_context
Now that all the flow is streamlined the rule is simple: We create
a new ppgtt for a new context when we have full ppgtt enabled.
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 6 Aug 2014 13:04:53 +0000 (15:04 +0200)]
drm/i915: Only track real ppgtt for a context
There's a bit a confusion since we track the global gtt,
the aliasing and real ppgtt in the ctx->vm pointer. And not
all callers really bother to check for the different cases and just
presume that it points to a real ppgtt.
Now looking closely we don't actually need ->vm to always point at an
address space - the only place that cares actually has fixup code
already to decide whether to look at the per-proces or the global
address space.
So switch to just tracking the ppgtt directly and ditch all the
extraneous code.
v2: Fixup the ppgtt debugfs file to not oops on a NULL ctx->ppgtt.
Also drop the early exit - without aliasing ppgtt we want to dump all
the ppgtts of the contexts if we have full ppgtt.
v3: Actually git add the compile fix.
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Cc: "Thierry, Michel" <michel.thierry@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
OTC-Jira: VIZ-3724
[danvet: Resolve conflicts with execlist patches while applying.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 6 Aug 2014 18:19:54 +0000 (20:19 +0200)]
drm/i915: Initialize the aliasing ppgtt as part of global gtt
Stuffing this into the context setup code doesn't make a lot of sense.
Also reusing the real ppgtt setup code makes even less sense since the
aliasing ppgtt isn't a real address space. Leaving all that stuff
unitialized will make sure that we catch any abusers promptly.
This is also a prep work to clean up the context->ppgtt link.
v2: Fix up the logic fail, I've fumbled it so badly to completely
disable ppgtt on gen6. Spotted by Ville and Michel. Also move around
the pde write into the gen6 init function, since otherwise it won't
work at all.
v3: Only initialize the aliasing ppgtt when we actually enable it.
Cc: "Thierry, Michel" <michel.thierry@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
[danvet: Squash in fixup from Fengguang Wu.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 6 Aug 2014 18:19:53 +0000 (20:19 +0200)]
drm/i915: Rework ppgtt init to no require an aliasing ppgtt
Currently we abuse the aliasing ppgtt to set up the ppgtt support in
general. Which is a bit backwards since with full ppgtt we don't ever
need the aliasing ppgtt.
So untangle this and separate the ppgtt init from the aliasing
ppgtt. While at it drag it out of the context enabling (which just
does a switch to the default context).
Note that we still have the differentiation between synchronous and
asynchronous ppgtt setup, but that will soon vanish. So also correctly
wire up the return value handling to be prepared for when ->switch_mm
drops the synchronous parameter and could start to fail.
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 6 Aug 2014 13:04:51 +0000 (15:04 +0200)]
drm/i915: Fix up checks for aliasing ppgtt
A subsequent patch will no longer initialize the aliasing ppgtt if we
have full ppgtt enabled, since we simply don't need that any more.
Unfortunately a few places check for the aliasing ppgtt instead of
checking for ppgtt in general. Fix them up.
One special case are the gtt offset and size macros, which have some
code to remap the aliasing ppgtt to the global gtt. The aliasing ppgtt
is _not_ a logical address space, so passing that in as the vm is
plain and simple a bug. So just WARN about it and carry on - we have a
gracefully fall-through anyway if we can't find the vma.
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 6 Aug 2014 13:04:50 +0000 (15:04 +0200)]
drm/i915: Allow i915_gem_setup_global_gtt to fail
We already needs this just as a safety check in case the preallocation
reservation dance fails. But we definitely need this to be able to
move tha aliasing ppgtt setup back out of the context code to this
place, where it belongs.
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 6 Aug 2014 13:04:49 +0000 (15:04 +0200)]
drm/i915: Add proper prefix to obj_to_ggtt
Stuff in headers really aught to have this.
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 6 Aug 2014 13:04:48 +0000 (15:04 +0200)]
drm/i915: Only refcount ppgtt if it actually is one
This essentially unbreaks non-ppgtt operation where we'd scribble over
random memory.
While at it give the vm_to_ppgtt function a proper prefix and make it
a bit more paranoid.
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 6 Aug 2014 13:04:47 +0000 (15:04 +0200)]
drm/i915: Track file_priv, not ctx in the ppgtt structure
Hardware contexts reference a ppgtt, not the other way round. And the
only user of this (in debugfs) actually only cares about which file
the ppgtt is associated with. So give it what it wants.
While at it give the ppgtt create function a proper name&place.
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 6 Aug 2014 13:04:45 +0000 (15:04 +0200)]
drm/i915: Some cleanups for the ppgtt lifetime handling
So when reviewing Michel's patch I've noticed a few things and cleaned
them up:
- The early checks in ppgtt_release are now redundant: The inactive
list should always be empty now, so we can ditch these checks. Even
for the aliasing ppgtt (though that's a different confusion) since
we tear that down after all the objects are gone.
- The ppgtt handling functions are splattered all over. Consolidate
them in i915_gem_gtt.c, give them OCD prefixes and add wrappers for
get/put.
- There was a bit a confusion in ppgtt_release about whether it cares
about the active or inactive list. It should care about them both,
so augment the WARNINGs to check for both.
There's still create_vm_for_ctx left to do, put that is blocked on the
removal of ppgtt->ctx. Once that's done we can rename it to
i915_ppgtt_create and move it to its siblings for handling ppgtts.
v2: Move the ppgtt checks into the inline get/put functions as
suggested by Chris.
v3: Inline the now redundant ppgtt local variable.
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Michel Thierry [Wed, 6 Aug 2014 13:04:44 +0000 (15:04 +0200)]
drm/i915: vma/ppgtt lifetime rules
VMAs should take a reference of the address space they use.
Now, when the fd is closed, it will release the ref that the context was
holding, but it will still be referenced by any vmas that are still
active.
ppgtt_release() should then only be called when the last thing referencing
it releases the ref, and it can just call the base cleanup and free the
ppgtt.
Note that with this we will extend the lifetime of ppgtts which
contain shared objects. But all the non-shared objects will get
removed as soon as they drop of the active list and for the shared
ones the shrinker can eventually reap them. Since we currently can't
evict ppgtt pagetables either I don't think that temporary leak is
important.
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
[danvet: Add note about potential ppgtt leak with this approach.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:34 +0000 (17:04 +0100)]
drm/i915/bdw: Always use MMIO flips with Execlists
The normal flip function places things in the ring in the legacy
way, so we either fix that or force MMIO flips always as we do in
this patch.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Checkpatch. Fucking again.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:33 +0000 (17:04 +0100)]
drm/i915/bdw: Workload submission mechanism for Execlists
This is what i915_gem_do_execbuffer calls when it wants to execute some
worload in an Execlists world.
v2: Check arguments before doing stuff in intel_execlists_submission. Also,
get rel_constants parsing right.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Drop the chipset flush, that's pre-gen6. And appease
checkpatch a bit .... again!]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:32 +0000 (17:04 +0100)]
drm/i915/bdw: GEN-specific logical ring emit batchbuffer start
Dispatch_execbuffer's evil twin.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Ditch the check for aliasing ppgtt. It'll break soon and
execlists requires full ppgtt anyway.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:31 +0000 (17:04 +0100)]
drm/i915/bdw: Interrupts with logical rings
We need to attend context switch interrupts from all rings. Also, fixed writing
IMR/IER and added HWSTAM at ring init time.
Notice that, if added to irq_enable_mask, the context switch interrupts would
be incorrectly masked out when the user interrupts are due to no users waiting
on a sequence number. Therefore, this commit adds a bitmask of interrupts to
be kept unmasked at all times.
v2: Disable HWSTAM, as suggested by Damien (nobody listens to these interrupts,
anyway).
v3: Add new get/put_irq functions.
Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> (v1)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> (v2 & v3)
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Drop the GEN8_ prefix from the context switch interrupt
define and move it to its brethren.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:30 +0000 (17:04 +0100)]
drm/i915/bdw: Ring idle and stop with logical rings
This is a hard one, since there is no direct hardware ring to
control when in Execlists.
We reuse intel_ring_idle here, but it should be fine as long
as i915_add_request does the ring thing.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:28 +0000 (17:04 +0100)]
drm/i915/bdw: GEN-specific logical ring emit flush
Same as the legacy-style ring->flush.
v2: The BSD invalidate bit still exists in GEN8! Add it for the VCS
rings (but still consolidate the blt and bsd ring flushes into one).
This was noticed by Brad Volkin.
v3: The command for BSD and for other rings is slightly different:
get it exactly the same as in gen6_ring_flush + gen6_bsd_ring_flush
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Checkpatch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:27 +0000 (17:04 +0100)]
drm/i915/bdw: GEN-specific logical ring emit request
Very similar to the legacy add_request, only modified to account for
logical ringbuffer.
v2: Use MI_GLOBAL_GTT, as suggested by Brad Volkin.
v3: Unify render and non-render in the same function, as noticed by
Brad Volkin.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:26 +0000 (17:04 +0100)]
drm/i915/bdw: New logical ring submission mechanism
Well, new-ish: if all this code looks familiar, that's because it's
a clone of the existing submission mechanism (with some modifications
here and there to adapt it to LRCs and Execlists).
And why did we do this instead of reusing code, one might wonder?
Well, there are some fears that the differences are big enough that
they will end up breaking all platforms.
Also, Execlists offer several advantages, like control over when the
GPU is done with a given workload, that can help simplify the
submission mechanism, no doubt. I am interested in getting Execlists
to work first and foremost, but in the future this parallel submission
mechanism will help us to fine tune the mechanism without affecting
old gens.
v2: Pass the ringbuffer only (whenever possible).
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Appease checkpatch. Again. And drop the legacy sarea gunk
that somehow crept in.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Mon, 11 Aug 2014 15:37:37 +0000 (18:37 +0300)]
drm/i915: Make hpd debug messages less cryptic
Don't print raw numbers, use port_name() and tell the user whether it's
long or short without having to figure out what the other magic number
means.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:25 +0000 (17:04 +0100)]
drm/i915/bdw: GEN-specific logical ring set/get seqno
No mistery here: the seqno is still retrieved from the engine's
HW status page (the one in the default context. For the moment,
I see no reason to worry about other context's HWS page).
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:24 +0000 (17:04 +0100)]
drm/i915/bdw: GEN-specific logical ring init
Logical rings do not need most of the initialization their
legacy ringbuffer counterparts do: we just need the pipe
control object for the render ring, enable Execlists on the
hardware and a few workarounds.
v2: Squash with: "drm/i915: Extract pipe control fini & make
init outside accesible".
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Make checkpatch happy.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:23 +0000 (17:04 +0100)]
drm/i915/bdw: Generic logical ring init and cleanup
Allocate and populate the default LRC for every ring, call
gen-specific init/cleanup, init/fini the command parser and
set the status page (now inside the LRC object). These are
things all engines/rings have in common.
Stopping the ring before cleanup and initializing the seqnos
is left as a TODO task (we need more infrastructure in place
before we can achieve this).
v2: Check the ringbuffer backing obj for ring_is_initialized,
instead of the context backing obj (similar, but not exactly
the same).
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:22 +0000 (17:04 +0100)]
drm/i915/bdw: Skeleton for the new logical rings submission path
Execlists are indeed a brave new world with respect to workload
submission to the GPU.
In previous version of these series, I have tried to impact the
legacy ringbuffer submission path as little as possible (mostly,
passing the context around and using the correct ringbuffer when I
needed one) but Daniel is afraid (probably with a reason) that
these changes and, especially, future ones, will end up breaking
older gens.
This commit and some others coming next will try to limit the
damage by creating an alternative path for workload submission.
The first step is here: laying out a new ring init/fini.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:21 +0000 (17:04 +0100)]
drm/i915: Abstract the legacy workload submission mechanism away
As suggested by Daniel Vetter. The idea, in subsequent patches, is to
provide an alternative to these vfuncs for the Execlists submission
mechanism.
v2: Splitted into two and reordered to illustrate our intentions, instead
of showing it off. Also, remove the add_request vfunc and added the
stop_ring one.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet:
- Make checkpatch happy.
- Be grumpy about the excessive vtable.
- Ditch gt->is_ring_initialized.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:18 +0000 (17:04 +0100)]
drm/i915/bdw: Deferred creation of user-created LRCs
The backing objects and ringbuffers for contexts created via open
fd are actually empty until the user starts sending execbuffers to
them. At that point, we allocate & populate them. We do this because,
at create time, we really don't know which engine is going to be used
with the context later on (and we don't want to waste memory on
objects that we might never use).
v2: As contexts created via ioctl can only be used with the render
ring, we have enough information to allocate & populate them right
away.
v3: Defer the creation always, even with ioctl-created contexts, as
requested by Daniel Vetter.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:17 +0000 (17:04 +0100)]
drm/i915/bdw: Populate LR contexts (somewhat)
For the most part, logical ring context objects are similar to hardware
contexts in that the backing object is meant to be opaque. There are
some exceptions where we need to poke certain offsets of the object for
initialization, updating the tail pointer or updating the PDPs.
For our basic execlist implementation we'll only need our PPGTT PDs,
and ringbuffer addresses in order to set up the context. With previous
patches, we have both, so start prepping the context to be load.
Before running a context for the first time you must populate some
fields in the context object. These fields begin 1 PAGE + LRCA, ie. the
first page (in 0 based counting) of the context image. These same
fields will be read and written to as contexts are saved and restored
once the system is up and running.
Many of these fields are completely reused from previous global
registers: ringbuffer head/tail/control, context control matches some
previous MI_SET_CONTEXT flags, and page directories. There are other
fields which we don't touch which we may want in the future.
v2: CTX_LRI_HEADER_0 is MI_LOAD_REGISTER_IMM(14) for render and (11)
for other engines.
v3: Several rebases and general changes to the code.
v4: Squash with "Extract LR context object populating"
Also, Damien's review comments:
- Set the Force Posted bit on the LRI header, as the BSpec suggest we do.
- Prevent warning when compiling a 32-bits kernel without HIGHMEM64.
- Add a clarifying comment to the context population code.
v5: Damien's review comments:
- The third MI_LOAD_REGISTER_IMM in the context does not set Force Posted.
- Remove dead code.
v6: Add a note about the (presumed) differences between BDW and CHV state
contexts. Also, Brad's review comments:
- Use the _MASKED_BIT_ENABLE, upper_32_bits and lower_32_bits macros.
- Be less magical about how we set the ring size in the context.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1)
Signed-off-by: Rafael Barbalho <rafael.barbalho@intel.com> (v2)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Mon, 11 Aug 2014 14:17:44 +0000 (16:17 +0200)]
drm/i915/bdw: Add a context and an engine pointers to the ringbuffer
Any given ringbuffer is unequivocally tied to one context and one engine.
By setting the appropriate pointers to them, the ringbuffer struct holds
all the infromation you might need to submit a workload for processing,
Execlists style.
v2: Drop ring->ctx since that looks terribly ill-defined for legacy
ringbuffer submission.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> (v1)
Acked-by: Damien Lespiau <damien.lespiau@intel.com> (v2)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:15 +0000 (17:04 +0100)]
drm/i915/bdw: Allocate ringbuffers for Logical Ring Contexts
As we have said a couple of times by now, logical ring contexts have
their own ringbuffers: not only the backing pages, but the whole
management struct.
In a previous version of the series, this was achieved with two separate
patches:
drm/i915/bdw: Allocate ringbuffer backing objects for default global LRC
drm/i915/bdw: Allocate ringbuffer for user-created LRCs
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:14 +0000 (17:04 +0100)]
drm/i915/bdw: A bit more advanced LR context alloc/free
Now that we have the ability to allocate our own context backing objects
and we have multiplexed one of them per engine inside the context structs,
we can finally allocate and free them correctly.
Regarding the context size, reading the register to calculate the sizes
can work, I think, however the docs are very clear about the actual
context sizes on GEN8, so just hardcode that and use it.
v2: Rebased on top of the Full PPGTT series. It is important to notice
that at this point we have one global default context per engine, all
of them using the aliasing PPGTT (as opposed to the single global
default context we have with legacy HW contexts).
v3:
- Go back to one single global default context, this time with multiple
backing objects inside.
- Use different context sizes for non-render engines, as suggested by
Damien (still hardcoded, since the information about the context size
registers in the BSpec is, well, *lacking*).
- Render ctx size is 20 (or 19) pages, but not 21 (caught by Damien).
- Move default context backing object creation to intel_init_ring (so
that we don't waste memory in rings that might not get initialized).
v4:
- Reuse the HW legacy context init/fini.
- Create a separate free function.
- Rename the functions with an intel_ preffix.
v5: Several rebases to account for the changes in the previous patches.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:13 +0000 (17:04 +0100)]
drm/i915/bdw: Introduce one context backing object per engine
A context backing object only makes sense for a given engine (because
it holds state data specific to that engine).
In legacy ringbuffer sumission mode, the only MI_SET_CONTEXT we really
perform is for the render engine, so one backing object is all we nee.
With Execlists, however, we need backing objects for every engine, as
contexts become the only way to submit workloads to the GPU. To tackle
this problem, we multiplex the context struct to contain <no-of-engines>
objects.
Originally, I colored this code by instantiating one new context for
every engine I wanted to use, but this change suggested by Brad Volkin
makes it more elegant.
v2: Leave the old backing object pointer behind. Daniel Vetter suggested
using a union, but it makes more sense to keep rcs_state as a NULL
pointer behind, to make sure no one uses it incorrectly when Execlists
are enabled, similar to what he suggested for ring->buffer (Rusty's API
level 5).
v3: Use the name "state" instead of the too-generic "obj", so that it
mirrors the name choice for the legacy rcs_state.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:12 +0000 (17:04 +0100)]
drm/i915/bdw: Initialization for Logical Ring Contexts
For the moment this is just a placeholder, but it shows one of the
main differences between the good ol' HW contexts and the shiny
new Logical Ring Contexts: LR contexts allocate and free their
own backing objects. Another difference is that the allocation is
deferred (as the create function name suggests), but that does not
happen in this patch yet, because for the moment we are only dealing
with the default context.
Early in the series we had our own gen8_gem_context_init/fini
functions, but the truth is they now look almost the same as the
legacy hw context init/fini functions. We can always split them
later if this ceases to be the case.
Also, we do not fall back to legacy ringbuffers when logical ring
context initialization fails (not very likely to happen and, even
if it does, hw contexts would probably fail as well).
v2: Daniel says "explain, do not showcase".
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: s/BUG_ON/WARN_ON/.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Mon, 11 Aug 2014 13:57:57 +0000 (15:57 +0200)]
drm/i915: WARN if module opt sanitization goes out of order
Depending upon one module option to be sanitized (through USES_PPGTT)
for the other is a bit too fragile for my taste. At least WARN about
this.
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:11 +0000 (17:04 +0100)]
drm/i915/bdw: Macro for LRCs and module option for Execlists
GEN8 brings an expansion of the HW contexts: "Logical Ring Contexts".
These expanded contexts enable a number of new abilities, especially
"Execlists".
The macro is defined to off until we have things in place to hope to
work.
v2: Rename "advanced contexts" to the more correct "logical ring
contexts".
v3: Add a module parameter to enable execlists. Execlist are relatively
new, and so it'd be wise to be able to switch back to ring submission
to debug subtle problems that will inevitably arise.
v4: Add an intel_enable_execlists function.
v5: Sanitize early, as suggested by Daniel. Remove lrc_enabled.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1)
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> (v3)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> (v2, v4 & v5)
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Oscar Mateo [Thu, 24 Jul 2014 16:04:10 +0000 (17:04 +0100)]
drm/i915/bdw: New source and header file for LRs, LRCs and Execlists
Some legacy HW context code assumptions don't make sense for this new
submission method, so we will place this stuff in a separate file.
Note for reviewers: I've carefully considered the best name for this file
and this was my best option (other possibilities were intel_lr_context.c
or intel_execlist.c). I am open to a certain bikeshedding on this matter,
anyway.
And some point in time, it would be a good idea to split intel_lrc.c/.h
even further, but for the moment just shove everything together.
v2: Change to intel_lrc.c
v3: Squash together with the header file addition
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Sun, 10 Aug 2014 05:29:11 +0000 (06:29 +0100)]
drm/i915: Simplify relocate_entry_gtt() and make 64-bit safe
Even though we should not try to use 4+GiB GTTs on 32-bit systems, by
using a local variable we can future proof the code whilst making it
easier to read.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Appease checkpatch a bit.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Sun, 10 Aug 2014 05:29:10 +0000 (06:29 +0100)]
drm/i915: Remove redundant list_empty(eb->vmas) tests in execbuffer
Part of the pre-validation for an execbuffer call is that there is at
least one object in the execlist. As we bail if we fail to lookup any
object, we can be sure that after the eb_lookup_vma() there is at least
one object in the vma list and so we do not need to assert.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Sun, 10 Aug 2014 05:29:08 +0000 (06:29 +0100)]
drm/i915: Pre-validate the NEED_GTTS flag for execbuffer
We have an implementation requirement that precludes the user from
requesting a ggtt entry when the device is operating in ppgtt mode. Move
the current check from inside the execbuffer object collation to the
prevalidation phase.
v2: Roll both invalid flags checks into one
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Mon, 11 Aug 2014 10:08:58 +0000 (12:08 +0200)]
drm/i915: Fix secure dispatch with full ppgtt
Based upon a hunk from a patch from Chris Wilson, but augmented to:
- Process the batch in the full ppgtt vm so that self-relocations
match again with userspace's expectations..
- Add a comment why plain pin for the global gtt binding is safe at
that point.
v2: Drop local bind_vm variable (Chris).
v3: Explain why this works despite the lack of proper active tracking
for the ggtt batch vma.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Sat, 9 Aug 2014 18:18:43 +0000 (19:18 +0100)]
drm/i915: Agnostic INTEL_INFO
Adapt the macro so that we can pass either the struct drm_device or the
struct drm_i915_private pointers and get the answer we want. Over time,
my plan is to convert all users over to using drm_i915_private and so
trimming down the pointer dance. Having spent a few hours chasing that
goal and achieved over 8k of object code saving, it appears to be a
worthwhile target. This interim macro allows us to slowly convert over.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Drop the (struct drm_device *) cast per the m-l discussion.
Also explain the seemingly unecessary first cast.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 11 Aug 2014 08:21:35 +0000 (09:21 +0100)]
drm/i915: Double check ring is idle before declaring the GPU wedged
During ring initialisation, sometimes we observe, though not in
production hardware, that the idle flag is not set even though the ring
is empty. Double check before giving up.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Sat, 9 Aug 2014 22:00:58 +0000 (23:00 +0100)]
drm/i915: Remove set but unused 'gt_perf_status'
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Sat, 9 Aug 2014 22:00:56 +0000 (23:00 +0100)]
drm/i915: Make intel_disable_shared_dpll() static
Found with sparse.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Sat, 9 Aug 2014 18:18:42 +0000 (19:18 +0100)]
drm/i915: Copy PCI device id into the device info block
This is so that we can make the drm_i915_private->info always the
preferred source for chipset type and feature queries.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Sat, 9 Aug 2014 16:37:24 +0000 (17:37 +0100)]
drm/i915: Remove fenced_gpu_access and pending_fenced_gpu_access
This migrates the fence tracking onto the existing seqno
infrastructure so that the later conversion to tracking via requests is
simplified.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 11 Aug 2014 10:00:12 +0000 (12:00 +0200)]
drm/i915: Force CPU relocations if not GTT mapped
Move the decision on whether we need to have a mappable object during
execbuffer to the fore and then reuse that decision by propagating the
flag through to reservation. As a corollary, before doing the actual
relocation through the GTT, we can make sure that we do have a GTT
mapping through which to operate.
Note that the key to make this work is to ditch the
obj->map_and_fenceable unbind optimization - with full ppgtt it
doesn't make a lot of sense any more anyway.
v2: Revamp and resend to ease future patches.
v3: Refresh patch rationale
References: https://bugs.freedesktop.org/show_bug.cgi?id=81094
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Explain why obj->map_and_fenceable is key and split out the
secure batch fix.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Sat, 9 Aug 2014 16:37:22 +0000 (17:37 +0100)]
drm/i915: Only perform set-to-gtt domain for objects bound to the global gtt
If an object is not bound into the global GTT, then it cannot be
accessed via the GTT. This restores the original code that was muddled
by ppGTT. In the process, we remove a WARN that had long outlived its
usefulness and was simply being coded around instead.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Sat, 9 Aug 2014 15:29:31 +0000 (16:29 +0100)]
drm/i915: Fix wrong number of HDMI translation entries
I keep telling myself that those tables aren't great because their size
is the number of dwords we need to program and not the number of entries
(number of dwords = number of entries * 2).
And... I got it wrong when I refactored the code. Fortunately, it was
only wrong when the VBT table (or the code parsing it) is itself
erroneous. Long story short, it shouldn't matter, but still, there's a
potential array overflow and random programming of the DDI translation
tables.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Sonika Jindal [Mon, 11 Aug 2014 03:36:39 +0000 (09:06 +0530)]
drm/i915: Continuation of future readiness series
Removing the check for HAS_PCH_SPLIT, it looks redundant here. Anyways all the
platforms are checked separately.
v2: Reordering as per the gen (Ville)
Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Fri, 8 Aug 2014 20:45:32 +0000 (17:45 -0300)]
drm/i915: fix i915_interrupt_info on BDW
Currently, if the machine is runtime suspended an you read the file,
you will get an "Unclaimed register" error message.
Testcase: igt/pm_rpm/debugfs-read
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 8 Aug 2014 18:51:11 +0000 (21:51 +0300)]
drm/i915: Call .update_primary_plane in intel_{enable, disable}_primary_hw_plane()
Make the intel_{enable,disable}_primary_hw_plane() simply call
.update_primary_plane(), thus eliminating the rmw from these functions
which should help the poor old 830M.
Now we can also remove the .update_primary_plane() from the
.crtc_enable() hooks because we end up calling it via
intel_crtc_enable_planes()->intel_enable_primary_hw_plane().
This also has the nice benefit of making primary planes a bit closer to
the way we handle sprite planes during modesets.
v2: Just write 0 to DSPCNTR and DSPSURF/DSPADDR if the plane is (to be)
disabled. Quicker, and more importantly avoids an oops when fb==NULL
due to BIOS fb takeover failure.
Pimp the commit message a bit (Matt)
v3: Drop useless primary_enabled checks when setting DISPLAY_PLANE_ENABLE
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 8 Aug 2014 18:51:10 +0000 (21:51 +0300)]
drm/i915: Eliminate rmw from .update_primary_plane()
Move the entire DSPCNTR register setup into the .update_primary_plane()
functions. That's where it belongs anyway and it'll also help 830M which
has the extra problem that plane registers reads will return the value
latched at the last vblank, not the value that was last written.
Also move DSPPOS and DSPSIZE setup there.
v2: Don't move variable initialization to avoid churn later
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Fri, 8 Aug 2014 18:25:57 +0000 (19:25 +0100)]
drm/i915: Fix erroneous conversion to u8
adj was defined as u8. The issue is last_adj can be negative and adj is
initialized with:
adj = dev_priv->rps.last_adj;
and we were also happily doing things like:
if (adj < 0)
(thank static analysers!)
v2: Make new_delay an int in case we overflow the u8 in the intermediate
computations. new_delay will get clamped at the end anyway. (Ville)
Cc: Deepak S <deepak.s@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 8 Aug 2014 18:44:59 +0000 (20:44 +0200)]
drm/i915: Update DRIVER_DATE to
20140808
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 7 Aug 2014 14:05:39 +0000 (16:05 +0200)]
drm/i915: No busy-loop wait_for in the ring init code
Doing a 1s wait (tops) with the cpu is a bit excessive. Tune it down
like everything else in that code.
v2: Also insert the missing space Chris spotted.
Cc: Naresh Kumar Kachhi <naresh.kumar.kachhi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Gajanan Bhat [Thu, 7 Aug 2014 11:33:30 +0000 (17:03 +0530)]
drm/i915: Add sprite watermark programming for VLV and CHV
Program DDL register as part of sprite watermark programming for CHV and VLV.
v2: Rename DRAIN_LATENCY_MAX by DRAIN_LATENCY_MASK
v3: Addressed review comments by Ville
- Changed Sprite DDL definitions to more generic to avoid multiple if-else
- Changed bit masking to customary form
- Changed to bitwise shorthand operator for sprite_dl assignment
Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Gajanan Bhat [Tue, 5 Aug 2014 17:45:54 +0000 (23:15 +0530)]
drm/i915: Round-up clock and limit drain latency
Round up clock computation and limit drain latency to maximum of 0x7F.
Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Gajanan Bhat [Wed, 6 Aug 2014 20:28:24 +0000 (01:58 +0530)]
drm/i915: Generalize drain latency computation
Modify drain latency computation to use it for any plane. Same function can be
used for primary, cursor and sprite planes.
v2: Adressed review comments by Imre and Ville.
- Moved clock round up in separate patch
- Added WARN check for clock and pixel size
- Simplified bit masking
- Use cursor_base instead of reg read
v3: Changed to bitwise shorthand operator for plane_dl assignment.
Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Wed, 6 Aug 2014 11:02:51 +0000 (14:02 +0300)]
drm/i915: Free pending page flip events at .preclose()
If there are pending page flips when the fd gets closed those page
flips may have events associated to them. When the page flip eventually
completes it will queue the event to file_priv->event_list, but that
may be too late and file_priv->event_list has already been cleaned up.
Thus we leak a bit of kernel memory in the form of the event structure.
To avoid such problems clear out such pending events from
intel_crtc->unpin_work at ->preclose(). Any event that already made it
to file_priv->event_list will get cleaned up by the drm_release_events()
a bit later.
We can ignore the file_priv->event_space accounting since file_priv is
going away. This is already how drm core deals with pending vblank
events, which are maintained by the drm core.
What saves us from a total disaster (ie. dereferencing and alrady
freed file_priv) is the fact that the fb descruction triggers a modeset
and there we wait for pending flips.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jesse Barnes [Tue, 5 Aug 2014 14:51:18 +0000 (07:51 -0700)]
drm/i915: clean up PPGTT checking logic
sanitize_enable_ppgtt is the function that checks all the conditions,
honoring a forced ppgtt status or doing auto-detect as necessary. Just
make sure it returns the right value in all cases and use that in the
macros instead of the confusing intel_enable_ppgtt() function.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[danvet: Don't reenable full ppgtt through the backdoor.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 27 Jun 2014 16:52:13 +0000 (19:52 +0300)]
drm/i915: Polish the chv cmnlane resrt macros
Replace the semi-funky cmnlane assert/deassert macros with something a
bit more conventional. Also protect the macro arguments properly (also
for PHY_POWERGOOD()).
Reviewed-by: Rafael Barbalho <rafael.barbalho@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 27 Jun 2014 16:49:57 +0000 (19:49 +0300)]
drm/i915: Hack to tie both common lanes together on chv
It looks like frobbing the cmnreset line on pne PHY disturbs the other
PHY on chv. The result is a black screen. On HDMI it's just a flash of
black, but DP usually falls over and can't get back up.
As a workaround set up the power domains so that both common lane
wells power up and down together. I also tried leaving the cmnreset
deasserted even the if the power well goes down but that didn't seem
acceptable to the PHY.
Reviewed-by: Rafael Barbalho <rafael.barbalho@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 26 Jun 2014 14:03:06 +0000 (17:03 +0300)]
drm/i915: Add cherryview_update_wm()
CHV has a third pipe so we need to compute the watermarks for its
planes. Add cherryview_update_wm() to do just that.
v2: Rebase on top of Imre's cxsr changes
v3: Pass crtc to vlv_update_drain_latency()
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Gajanan Bhat [Wed, 16 Jul 2014 12:54:03 +0000 (18:24 +0530)]
drm/i915: Update DDL only for current CRTC
Instead of looping through all CRTCs, update DDL for current CRTC for which
watermark is being updated.
CHV is confirmed to have precision of 32/64 which is same as VLV.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 26 Jun 2014 14:02:37 +0000 (17:02 +0300)]
drm/i915: Parametrize VLV_DDL registers
The VLV/CHV DDL registers are uniform, and neatly enough the register
offsets are sane so we can easily unify them to a single set of defines
and just pass the pipe as the parameter to compute the register offset.
Note that we now fill out the drain latency for pipe C on CHV which we
didn't do before. The rest of the pipe C watermarks are still untouched
but that will be remedied later by adding a proper cherryview_update_wm()
function.
v2: Add a note about CHV pipe C changes (Paulo)
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Wed, 11 Jun 2014 13:51:18 +0000 (16:51 +0300)]
drm/i915: Fill out the FWx watermark register defines
Add defines for all the watermark registers on modernish gmch platforms.
VLV has increased the number of bits available for certain watermaks so
expand the masks appropriately. Also vlv and chv have added some extra
FW registers.
Not sure what happened on chv because a new register called FW9 is now
at the offset where FW7 was on vlv, while FW7 and FW8 (another new
register) have been moved off somewhere else. Oh well, well just need
two defines for FW7 then.
v2: Fix DSPHOWM1 offset (Paulo)
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Sonika Jindal [Tue, 5 Aug 2014 05:56:57 +0000 (11:26 +0530)]
drm: Resetting rotation property
Reset rotation property to 0.
v2: Resetting after disabling the plane
Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 5 Aug 2014 05:56:55 +0000 (11:26 +0530)]
drm/i915: Add rotation property for sprites
Sprite planes support 180 degree rotation. The lower layers are now in
place, so hook in the standard rotation property to expose the feature
to the users.
v2: Moving rotation_property to mode_config
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Sonika Jindal [Tue, 5 Aug 2014 05:56:54 +0000 (11:26 +0530)]
drm: Add rotation_property to mode_config
Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 5 Aug 2014 05:56:53 +0000 (11:26 +0530)]
drm/i915: Make intel_plane_restore() return an error
Propagate the error from intel_update_plane() up through
intel_plane_restore() to the caller. This will be used for
rollback purposes when setting properties fails.
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>