Btrfs: fix crash due to not cleaning up tree log block's dirty bits

commit 1846430c24d66e85cc58286b3319c82cd54debb2 upstream.

In cases that the whole fs flips into readonly status due to failures in
critical sections, then log tree's blocks are still dirty, and this leads
to a crash during umount time, the crash is about use-after-free,

umount
 -> close_ctree
    -> stop workers
    -> iput(btree_inode)
       -> iput_final
          -> write_inode_now
     -> ...
       -> queue job on stop'd workers

cc: <stable@vger.kernel.org> v3.12+
Fixes: 681ae50917df ("Btrfs: cleanup reserved space when freeing tree log on error")
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix deadlock in run_delalloc_nocow

commit e89166990f11c3f21e1649d760dd35f9e410321c upstream.

@cur_offset is not set back to what it should be (@cow_start) if
btrfs_next_leaf() returns something wrong, and the range [cow_start,
cur_offset) remains locked forever.

cc: <stable@vger.kernel.org>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm: correctly handle chained bios in dec_pending()

commit 8dd601fa8317243be887458c49f6c29c2f3d719f upstream.

dec_pending() is given an error status (possibly 0) to be recorded
against a bio.  It can be called several times on the one 'struct
dm_io', and it is careful to only assign a non-zero error to
io->status.  However when it then assigned io->status to bio->bi_status,
it is not careful and could overwrite a genuine error status with 0.

This can happen when chained bios are in use.  If a bio is chained
beneath the bio that this dm_io is handling, the child bio might
complete and set bio->bi_status before the dm_io completes.

This has been possible since chained bios were introduced in 3.14, and
has become a lot easier to trigger with commit 18a25da84354 ("dm: ensure
bio submission follows a depth-first tree walk") as that commit caused
dm to start using chained bios itself.

A particular failure mode is that if a bio spans an 'error' target and a
working target, the 'error' fragment will complete instantly and set the
->bi_status, and the other fragment will normally complete a little
later, and will clear ->bi_status.

The fix is simply to only assign io_error to bio->bi_status when
io_error is not zero.

Reported-and-tested-by: Milan Broz <gmazyland@gmail.com>
Cc: stable@vger.kernel.org (v3.14+)
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iscsi-target: make sure to wake up sleeping login worker

commit 1c130ae00b769a2e2df41bad3d6051ee8234b636 upstream.

Mike Christie reports:
  Starting in 4.14 iscsi logins will fail around 50% of the time.

Problem appears to be that iscsi_target_sk_data_ready() callback may
return without doing anything in case it finds the login work queue
is still blocked in sock_recvmsg().

Nicholas Bellinger says:
  It would indicate users providing their own ->sk_data_ready() callback
  must be responsible for waking up a kthread context blocked on
  sock_recvmsg(..., MSG_WAITALL), when a second ->sk_data_ready() is
  received before the first sock_recvmsg(..., MSG_WAITALL) completes.

So, do this and invoke the original data_ready() callback -- in
case of tcp sockets this takes care of waking the thread.

Disclaimer: I do not understand why this problem did not show up before
tcp prequeue removal.

(Drop WARN_ON usage - nab)

Reported-by: Mike Christie <mchristi@redhat.com>
Bisected-by: Mike Christie <mchristi@redhat.com>
Tested-by: Mike Christie <mchristi@redhat.com>
Diagnosed-by: Nicholas Bellinger <nab@linux-iscsi.org>
Fixes: e7942d0633c4 ("tcp: remove prequeue support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Cc: stable@vger.kernel.org # 4.14+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target/iscsi: avoid NULL dereference in CHAP auth error path

commit ce512d79d0466a604793addb6b769d12ee326822 upstream.

If chap_server_compute_md5() fails early, e.g. via CHAP_N mismatch, then
crypto_free_shash() is called with a NULL pointer which gets
dereferenced in crypto_shash_tfm().

Fixes: 69110e3cedbb ("iscsi-target: Use shash and ahash")
Suggested-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Cc: stable@vger.kernel.org # 4.6+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-wbt: account flush requests correctly

commit 5235553d821433e1f4fa720fd025d2c4b7ee9994 upstream.

Mikulas reported a workload that saw bad performance, and figured
out what it was due to various other types of requests being
accounted as reads. Flush requests, for instance. Due to the
high latency of those, we heavily throttle the writes to keep
the latencies in balance. But they really should be accounted
as writes.

Fix this by checking the exact type of the request. If it's a
read, account as a read, if it's a write or a flush, account
as a write. Any other request we disregard. Previously everything
would have been mistakenly accounted as reads.

Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xprtrdma: Fix BUG after a device removal

commit e89e8d8fcdc6751e86ccad794b052fe67e6ad619 upstream.

Michal Kalderon reports a BUG that occurs just after device removal:

[  169.112490] rpcrdma: removing device qedr0 for 192.168.110.146:20049
[  169.143909] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
[  169.181837] IP: rpcrdma_dma_unmap_regbuf+0xa/0x60 [rpcrdma]

The RPC/RDMA client transport attempts to allocate some resources
on demand. Registered buffers are one such resource. These are
allocated (or re-allocated) by xprt_rdma_allocate to hold RPC Call
and Reply messages. A hardware resource is associated with each of
these buffers, as they can be used for a Send or Receive Work
Request.

If a device is removed from under an NFS/RDMA mount, the transport
layer is responsible for releasing all hardware resources before
the device can be finally unplugged. A BUG results when the NFS
mount hasn't yet seen much activity: the transport tries to release
resources that haven't yet been allocated.

rpcrdma_free_regbuf() already checks for this case, so just move
that check to cover the DEVICE_REMOVAL case as well.

Reported-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Fixes: bebd031866ca ("xprtrdma: Support unplugging an HCA ...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xprtrdma: Fix calculation of ri_max_send_sges

commit 1179e2c27efe21167ec9d882b14becefba2ee990 upstream.

Commit 16f906d66cd7 ("xprtrdma: Reduce required number of send
SGEs") introduced the rpcrdma_ia::ri_max_send_sges field. This fixes
a problem where xprtrdma would not work if the device's max_sge
capability was small (low single digits).

At least RPCRDMA_MIN_SEND_SGES are needed for the inline parts of
each RPC. ri_max_send_sges is set to this value:

  ia->ri_max_send_sges = max_sge - RPCRDMA_MIN_SEND_SGES;

Then when marshaling each RPC, rpcrdma_args_inline uses that value
to determine whether the device has enough Send SGEs to convey an
NFS WRITE payload inline, or whether instead a Read chunk is
required.

More recently, commit ae72950abf99 ("xprtrdma: Add data structure to
manage RDMA Send arguments") used the ri_max_send_sges value to
calculate the size of an array, but that commit erroneously assumed
ri_max_send_sges contains a value similar to the device's max_sge,
and not one that was reduced by the minimum SGE count.

This assumption results in the calculated size of the sendctx's
Send SGE array to be too small. When the array is used to marshal
an RPC, the code can write Send SGEs into the following sendctx
element in that array, corrupting it. When the device's max_sge is
large, this issue is entirely harmless; but it results in an oops
in the provider's post_send method, if dev.attrs.max_sge is small.

So let's straighten this out: ri_max_send_sges will now contain a
value with the same meaning as dev.attrs.max_sge, which makes
the code easier to understand, and enables rpcrdma_sendctx_create
to calculate the size of the SGE array correctly.

Reported-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Fixes: 16f906d66cd7 ("xprtrdma: Reduce required number of send SGEs")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/qxl: reapply cursor after resetting primary

commit 9428088c90b6f7d5edd2a1b0d742c75339b36f6e upstream.

QXL associates mouse state with its primary plane.

Destroying a primary plane and putting a new one in place has the side
effect of destroying the cursor as well.

This commit changes the driver to reapply the cursor any time a new
primary is created. It achieves this by keeping a reference to the
cursor bo on the qxl_crtc struct.

This fix is very similar to

commit 4532b241a4b7 ("drm/qxl: reapply cursor after SetCrtc calls")

which got implicitly reverted as part of implementing the atomic
modeset feature.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1512097
Fixes: 1277eed5fecb ("drm: qxl: Atomic phase 1: convert cursor to universal plane")
Cc: stable@vger.kernel.org
Signed-off-by: Ray Strode <rstrode@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qxl: alloc & use shadow for dumb buffers

commit 62676d10b483a2ff6e8b08c5e7c7d63a831343f5 upstream.

This patch changes the way the primary surface is used for dumb
framebuffers.  Instead of configuring the bo itself as primary surface
a shadow bo is created and used instead.  Framebuffers can share the
shadow bo in case they have the same format and resolution.

On atomic plane updates we don't have to update the primary surface in
case we pageflip from one framebuffer to another framebuffer which
shares the same shadow.  This in turn avoids the flicker caused by the
primary-destroy + primary-create cycle, which is very annonying when
running wayland on qxl.

The qxl driver never actually writes to the shadow bo.  It sends qxl
blit commands which update it though, and the spice server might
actually execute them (and thereby write to the shadow) in case the
local rendering is kicked for some reason.  This happens for example in
case qemu is asked to write out a dump of the guest display (screendump
monitor command).

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20171019062150.28090-3-kraxel@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: proc: Set PTE_NG for table entries to avoid traversing them twice

commit 2ce77f6d8a9ae9ce6d80397d88bdceb84a2004cd upstream.

When KASAN is enabled, the swapper page table contains many identical
mappings of the zero page, which can lead to a stall during boot whilst
the G -> nG code continually walks the same page table entries looking
for global mappings.

This patch sets the nG bit (bit 11, which is IGNORED) in table entries
after processing the subtree so we can easily skip them if we see them
a second time.

Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: rtl8821ae: Fix connection lost problem correctly

commit c713fb071edc0efc01a955f65a006b0e1795d2eb upstream.

There has been a coding error in rtl8821ae since it was first introduced,
namely that an 8-bit register was read using a 16-bit read in
_rtl8821ae_dbi_read(). This error was fixed with commit 40b368af4b75
("rtlwifi: Fix alignment issues"); however, this change led to
instability in the connection. To restore stability, this change
was reverted in commit b8b8b16352cd ("rtlwifi: rtl8821ae: Fix connection
lost problem").

Unfortunately, the unaligned access causes machine checks in ARM
architecture, and we were finally forced to find the actual cause of the
problem on x86 platforms. Following a suggestion from Pkshih
<pkshih@realtek.com>, it was found that increasing the ASPM L1
latency from 0 to 7 fixed the instability. This parameter was varied to
see if a smaller value would work; however, it appears that 7 is the
safest value. A new symbol is defined for this quantity, thus it can be
easily changed if necessary.

Fixes: b8b8b16352cd ("rtlwifi: rtl8821ae: Fix connection lost problem")
Cc: Stable <stable@vger.kernel.org> # 4.14+
Fix-suggested-by: Pkshih <pkshih@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: James Cameron <quozl@laptop.org> # x86_64 OLPC NL3
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mpls, nospec: Sanitize array index in mpls_label_ok()

commit 3968523f855050b8195134da951b87c20bd66130 upstream.

mpls_label_ok() validates that the 'platform_label' array index from a
userspace netlink message payload is valid. Under speculation the
mpls_label_ok() result may not resolve in the CPU pipeline until after
the index is used to access an array element. Sanitize the index to zero
to prevent userspace-controlled arbitrary out-of-bounds speculation, a
precursor for a speculative execution side channel vulnerability.

Cc: <stable@vger.kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Fix parsing of globs with a wildcard at the beginning

commit 07234021410bbc27b7c86c18de98616c29fbe667 upstream.

Al Viro reported:

    For substring - sure, but what about something like "*a*b" and "a*b"?
    AFAICS, filter_parse_regex() ends up with identical results in both
    cases - MATCH_GLOB and *search = "a*b".  And no way for the caller
    to tell one from another.

Testing this with the following:

 # cd /sys/kernel/tracing
 # echo '*raw*lock' > set_ftrace_filter
 bash: echo: write error: Invalid argument

With this patch:

 # echo '*raw*lock' > set_ftrace_filter
 # cat set_ftrace_filter
_raw_read_trylock
_raw_write_trylock
_raw_read_unlock
_raw_spin_unlock
_raw_write_unlock
_raw_spin_trylock
_raw_spin_lock
_raw_write_lock
_raw_read_lock

Al recommended not setting the search buffer to skip the first '*' unless we
know we are not using MATCH_GLOB. This implements his suggested logic.

Link: http://lkml.kernel.org/r/20180127170748.GF13338@ZenIV.linux.org.uk
Cc: stable@vger.kernel.org
Fixes: 60f1d5e3bac44 ("ftrace: Support full glob matching")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Suggsted-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

seq_file: fix incomplete reset on read from zero offset

commit cf5eebae2cd28d37581507668605f4d23cd7218d upstream.

When resetting iterator on a zero offset we need to discard any data
already in the buffer (count), and private state of the iterator (version).

For example this bug results in first line being repeated in /proc/mounts
if doing a zero size read before a non-zero size read.

Reported-by: Rich Felker <dalias@libc.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: e522751d605d ("seq_file: reset iterator to first record for zero offset")
Cc: <stable@vger.kernel.org> # v4.10
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xenbus: track caller request id

commit 29fee6eed2811ff1089b30fc579a2d19d78016ab upstream.

Commit fd8aa9095a95 ("xen: optimize xenbus driver for multiple concurrent
xenstore accesses") optimized xenbus concurrent accesses but in doing so
broke UABI of /dev/xen/xenbus. Through /dev/xen/xenbus applications are in
charge of xenbus message exchange with the correct header and body. Now,
after the mentioned commit the replies received by application will no
longer have the header req_id echoed back as it was on request (see
specification below for reference), because that particular field is being
overwritten by kernel.

struct xsd_sockmsg
{
  uint32_t type;  /* XS_??? */
  uint32_t req_id;/* Request identifier, echoed in daemon's response.  */
  uint32_t tx_id; /* Transaction id (0 if not related to a transaction). */
  uint32_t len;   /* Length of data following this. */

  /* Generally followed by nul-terminated string(s). */
};

Before there was only one request at a time so req_id could simply be
forwarded back and forth. To allow simultaneous requests we need a
different req_id for each message thus kernel keeps a monotonic increasing
counter for this field and is written on every request irrespective of
userspace value.

Forwarding again the req_id on userspace requests is not a solution because
we would open the possibility of userspace-generated req_id colliding with
kernel ones. So this patch instead takes another route which is to
artificially keep user req_id while keeping the xenbus logic as is. We do
that by saving the original req_id before xs_send(), use the private kernel
counter as req_id and then once reply comes and was validated, we restore
back the original req_id.

Cc: <stable@vger.kernel.org> # 4.11
Fixes: fd8aa9095a ("xen: optimize xenbus driver for multiple concurrent xenstore accesses")
Reported-by: Bhavesh Davda <bhavesh.davda@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen: Fix {set,clear}_foreign_p2m_mapping on autotranslating guests

commit 781198f1f373c3e350dbeb3af04a7d4c81c1b8d7 upstream.

Commit 82616f9599a7 ("xen: remove tests for pvh mode in pure pv paths")
removed the check for autotranslation from {set,clear}_foreign_p2m_mapping
but those are called by grant-table.c also on PVH/HVM guests.

Cc: <stable@vger.kernel.org> # 4.14
Fixes: 82616f9599a7 ("xen: remove tests for pvh mode in pure pv paths")
Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rbd: whitelist RBD_FEATURE_OPERATIONS feature bit

commit e573427a440fd67d3f522357d7ac901d59281948 upstream.

This feature bit restricts older clients from performing certain
maintenance operations against an image (e.g. clone, snap create).
krbd does not perform maintenance operations.

Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

console/dummy: leave .con_font_get set to NULL

commit 724ba8b30b044aa0d94b1cd374fc15806cdd6f18 upstream.

When this method is set, the caller expects struct console_font fields
to be properly initialized when it returns. Leave it unset otherwise
nonsensical (leaked kernel stack) values are returned to user space.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

video: fbdev: atmel_lcdfb: fix display-timings lookup

commit 9cb18db0701f6b74f0c45c23ad767b3ebebe37f6 upstream.

Fix child-node lookup during probe, which ended up searching the whole
device tree depth-first starting at the parent rather than just matching
on its children.

To make things worse, the parent display node was also prematurely
freed.

Note that the display and timings node references are never put after a
successful dt-initialisation so the nodes would leak on later probe
deferrals and on driver unbind.

Fixes: b985172b328a ("video: atmel_lcdfb: add device tree suport")
Cc: stable <stable@vger.kernel.org> # 3.13
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: keystone: Fix interrupt-controller-node lookup

commit eac56aa3bc8af3d9b9850345d0f2da9d83529134 upstream.

Fix child-node lookup during initialisation which was using the wrong
OF-helper and ended up searching the whole device tree depth-first
starting at the parent rather than just matching on its children.

To make things worse, the parent pci node could end up being prematurely
freed as of_find_node_by_name() drops a reference to its first argument.
Any matching child interrupt-controller node was also leaked.

Fixes: 0c4ffcfe1fbc ("PCI: keystone: Add TI Keystone PCIe driver")
Cc: stable <stable@vger.kernel.org> # 3.18
Acked-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
[lorenzo.pieralisi@arm.com: updated commit subject]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: iproc: Fix NULL pointer dereference for BCMA

commit 3b65ca50d24ce33cb92d88840e289135c92b40ed upstream.

With the inbound DMA mapping supported added, the iProc PCIe driver
parses DT property "dma-ranges" through call to
"of_pci_dma_range_parser_init()". In the case of BCMA, this results in a
NULL pointer deference due to a missing of_node.

Fix this by adding a guard in pcie-iproc-platform.c to only enable the
inbound DMA mapping logic when DT property "dma-ranges" is present.

Fixes: dd9d4e7498de3 ("PCI: iproc: Add inbound DMA mapping support")
Reported-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Rafał Miłecki <rafal@milecki.pl>
cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Disable MSI for HiSilicon Hip06/Hip07 only in Root Port mode

commit deb86999323661c019ef2740eb9d479d1e526b5c upstream.

HiSilicon Hip06/Hip07 can operate as either a Root Port or an Endpoint.  It
always advertises an MSI capability, but it can only generate MSIs when in
Endpoint mode.

The device has the same Vendor and Device IDs in both modes, so check the
Class Code and disable MSI only when operating as a Root Port.

[bhelgaas: changelog]
Fixes: 72f2ff0deb87 ("PCI: Disable MSI for HiSilicon Hip06/Hip07 Root Ports")
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Cc: stable@vger.kernel.org # v4.11+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Fix incorrect mem=X@Y handling

commit 67a3ba25aa955198196f40b76b329b3ab9ad415a upstream.

Commit 73fbc1eba7ff ("MIPS: fix mem=X@Y commandline processing") added a
fix to ensure that the memory range between PHYS_OFFSET and low memory
address specified by mem= cmdline argument is not later processed by
free_all_bootmem.  This change was incorrect for systems where the
commandline specifies more than 1 mem argument, as it will cause all
memory between PHYS_OFFSET and each of the memory offsets to be marked
as reserved, which results in parts of the RAM marked as reserved
(Creator CI20's u-boot has a default commandline argument 'mem=256M@0x0
mem=768M@0x30000000').

Change the behaviour to ensure that only the range between PHYS_OFFSET
and the lowest start address of the memories is marked as protected.

This change also ensures that the range is marked protected even if it's
only defined through the devicetree and not only via commandline
arguments.

Reported-by: Mathieu Malaterre <mathieu.malaterre@gmail.com>
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@mips.com>
Fixes: 73fbc1eba7ff ("MIPS: fix mem=X@Y commandline processing")
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # v4.11+
Tested-by: Mathieu Malaterre <malat@debian.org>
Patchwork: https://patchwork.linux-mips.org/patch/18562/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Fix typo BIG_ENDIAN to CPU_BIG_ENDIAN

commit 2e6522c565522a2e18409c315c49d78c8b74807b upstream.

MIPS_GENERIC selects some options conditional on BIG_ENDIAN which does
not exist.

Replace BIG_ENDIAN with CPU_BIG_ENDIAN which is the correct kconfig
name. Note that BMIPS_GENERIC does the same which confirms that this
patch is needed.

Fixes: eed0eabd12ef0 ("MIPS: generic: Introduce generic DT-based board support")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.9+
Patchwork: https://patchwork.linux-mips.org/patch/18495/
[jhogan@kernel.org: Clean up commit message]
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: Fix memory size alignment in devm_memremap_pages_release()

commit 10a0cd6e4932b5078215b1ec2c896597eec0eff9 upstream.

The functions devm_memremap_pages() and devm_memremap_pages_release() use
different ways to calculate the section-aligned amount of memory. The
latter function may use an incorrect size if the memory region is small
but straddles a section border.

Use the same code for both.

Cc: <stable@vger.kernel.org>
Fixes: 5f29a77cd957 ("mm: fix mixed zone detection in devm_memremap_pages")
Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: hide a #warning for COMPILE_TEST

commit af27d9403f5b80685b79c88425086edccecaf711 upstream.

We get a warning about some slow configurations in randconfig kernels:

  mm/memory.c:83:2: error: #warning Unfortunate NUMA and NUMA Balancing config, growing page-frame for last_cpupid. [-Werror=cpp]

The warning is reasonable by itself, but gets in the way of randconfig
build testing, so I'm hiding it whenever CONFIG_COMPILE_TEST is set.

The warning was added in 2013 in commit 75980e97dacc ("mm: fold
page->_last_nid into page->flags where possible").

Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: correct documentation for grpid mount option

commit 9f0372488cc9243018a812e8cfbf27de650b187b upstream.

The grpid option is currently described as being the same as nogrpid.

Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: save error to disk in __ext4_grp_locked_error()

commit 06f29cc81f0350261f59643a505010531130eea0 upstream.

In the function __ext4_grp_locked_error(), __save_error_info()
is called to save error info in super block block, but does not sync
that information to disk to info the subsequence fsck after reboot.

This patch writes the error information to disk.  After this patch,
I think there is no obvious EXT4 error handle branches which leads to
"Remounting filesystem read-only" will leave the disk partition miss
the subsequence fsck.

Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix a race in the ext4 shutdown path

commit abbc3f9395c76d554a9ed27d4b1ebfb5d9b0e4ca upstream.

This patch fixes a race between the shutdown path and bio completion
handling. In the ext4 direct io path with async io, after submitting a
bio to the block layer, if journal starting fails,
ext4_direct_IO_write() would bail out pretending that the IO
failed. The caller would have had no way of knowing whether or not the
IO was successfully submitted. So instead, we return -EIOCBQUEUED in
this case. Now, the caller knows that the IO was submitted.  The bio
completion handler takes care of the error.

Tested: Ran the shutdown xfstest test 461 in loop for over 2 hours across
4 machines resulting in over 400 runs. Verified that the race didn't
occur. Usually the race was seen in about 20-30 iterations.

Signed-off-by: Harshad Shirwadkar <harshads@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: fix sphinx kernel-doc build warnings

commit f69120ce6c024aa634a8fc25787205e42f0ccbe6 upstream.

Sphinx emits various (26) warnings when building make target 'htmldocs'.
Currently struct definitions contain duplicate documentation, some as
kernel-docs and some as standard c89 comments.  We can reduce
duplication while cleaning up the kernel docs.

Move all kernel-docs to right above each struct member.  Use the set of
all existing comments (kernel-doc and c89).  Add documentation for
missing struct members and function arguments.

Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "apple-gmux: lock iGP IO to protect from vgaarb changes"

commit d6fa7588fd7a8def4c747c0c574ce85d453e3788 upstream.

Commit 4eebd5a4e726 ("apple-gmux: lock iGP IO to protect from vgaarb
changes") amended this driver's ->probe hook to lock decoding of normal
(non-legacy) I/O space accesses to the integrated GPU on dual-GPU
MacBook Pros.  The lock stays in place until the driver is unbound.

The change was made to work around an issue with the out-of-tree nvidia
graphics driver (available at http://www.nvidia.com/object/unix.html).
It contains the following sequence in nvidia/nv.c:

#if defined(CONFIG_VGA_ARB) && !defined(NVCPU_PPC64LE)
#if defined(VGA_DEFAULT_DEVICE)
    vga_tryget(VGA_DEFAULT_DEVICE, VGA_RSRC_LEGACY_MASK);
#endif
    vga_set_legacy_decoding(dev, VGA_RSRC_NONE);
#endif

This code was reported to cause deadlocks with VFIO already in 2013:
https://devtalk.nvidia.com/default/topic/545560

I've reported the issue to Nvidia developers once more in 2017:
https://www.spinics.net/lists/dri-devel/msg138754.html

On the MacBookPro10,1, this code apparently breaks backlight control
(which is handled by apple-gmux via an I/O region starting at 0x700),
as reported by Petri Hodju:
https://bugzilla.kernel.org/show_bug.cgi?id=86121

I tried to replicate Petri's observations on my MacBook9,1, which uses
the same Intel Ivy Bridge + Nvidia GeForce GT 650M architecture, to no
avail.  On my machine apple-gmux' I/O region remains accessible even
with the nvidia driver loaded and commit 4eebd5a4e726 reverted.
Petri reported that apple-gmux becomes accessible again after a
suspend/resume cycle because the BIOS changed the VGA routing on the
root port to the Nvidia GPU.  Perhaps this is a BIOS issue after all
that can be fixed with an update?

In any case, the change made by commit 4eebd5a4e726 has turned out to
cause two new issues:

* Wilfried Klaebe reports a deadlock when launching Xorg because it
  opens /dev/vga_arbiter and calls vga_get(), but apple-gmux is holding
  a lock on I/O space indefinitely.  It looks like apple-gmux' current
  behavior is an abuse of the vgaarb API as locks are not meant to be
  held for longer periods:
  https://bugzilla.kernel.org/show_bug.cgi?id=88861#c11
  https://bugzilla.kernel.org/attachment.cgi?id=217541

* On dual GPU MacBook Pros introduced since 2013, the integrated GPU is
  powergated on boot und thus becomes invisible to Linux unless a custom
  EFI protocol is used to leave it powered on.  (A patch exists but is
  not in mainline yet due to several negative side effects.)  On these
  machines, locking I/O to the integrated GPU (as done by 4eebd5a4e726)
  fails and backlight control is therefore broken:
  https://bugzilla.kernel.org/show_bug.cgi?id=105051

So let's revert commit 4eebd5a4e726 please.  Users experiencing the
issue with the proprietary nvidia driver can comment out the above-
quoted problematic code as a workaround (or try updating the BIOS).

Cc: Petri Hodju <petrihodju@yahoo.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bruno Prémont <bonbons@linux-vserver.org>
Cc: Andy Ritger <aritger@nvidia.com>
Cc: Ronald Tschalär <ronald@innovation.ch>
Tested-by: Wilfried Klaebe <linux-kernel@lebenslange-mailadresse.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mlx5: fix mlx5_get_vector_affinity to start from completion vector 0

commit 2572cf57d75a7f91835d9a38771e9e76d575d122 upstream.

The consumers of this routine expects the affinity map of of vector
index relative to the first completion vector. The upper layers are
not aware of internal/private completion vectors that mlx5 allocates
for its own usage.

Hence, return the affinity map of vector index relative to the first
completion vector.

Fixes: 05e0cc84e00c ("net/mlx5: Fix get vector affinity helper function")
Reported-by: Logan Gunthorpe <logang@deltatee.com>
Tested-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Cc: <stable@vger.kernel.org> # v4.15
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "mmc: meson-gx: include tx phase in the tuning process"

commit fe0e58048f005fdce315eb4d185e5c160be4ac01 upstream.

This reverts commit 0a44697627d17a66d7dc98f17aeca07ca79c5c20.

This commit was initially intended to fix problems with hs200 and hs400
on some boards, mainly the odroid-c2. The OC2 (Rev 0.2) I have performs
well in this modes, so I could not confirm these issues.

We've had several reports about the issues being still present on (some)
OC2, so apparently, this change does not do what it was supposed to do.
Maybe the eMMC signal quality is on the edge on the board. This may
explain the variability we see in term of stability, but this is just a
guess. Lowering the max_frequency to 100Mhz seems to do trick for those
affected by the issue

Worse, the commit created new issues (CRC errors and hangs) on other
boards, such as the kvim 1 and 2, the p200 or the libretech-cc.

According to amlogic, the Tx phase should not be tuned and left in its
default configuration, so it is best to just revert the commit.

Fixes: 0a44697627d1 ("mmc: meson-gx: include tx phase in the tuning process")
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: bcm2835: Don't overwrite max frequency unconditionally

commit 118032be389009b07ecb5a03ffe219a89d421def upstream.

The optional DT parameter max-frequency could init the max bus frequency.
So take care of this, before setting the max bus frequency.

Fixes: 660fc733bd74 ("mmc: bcm2835: Add new driver for the sdhost controller.")
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Cc: <stable@vger.kernel.org> # 4.12+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci: Implement an SDHCI-specific bounce buffer

commit bd9b902798ab14d19ca116b10bde581ddff8f905 upstream.

The bounce buffer is gone from the MMC core, and now we found out
that there are some (crippled) i.MX boards out there that have broken
ADMA (cannot do scatter-gather), and also broken PIO so they must
use SDMA. Closer examination shows a less significant slowdown
also on SDMA-only capable Laptop hosts.

SDMA sets down the number of segments to one, so that each segment
gets turned into a singular request that ping-pongs to the block
layer before the next request/segment is issued.

Apparently it happens a lot that the block layer send requests
that include a lot of physically discontiguous segments. My guess
is that this phenomenon is coming from the file system.

These devices that cannot handle scatterlists in hardware can see
major benefits from a DMA-contiguous bounce buffer.

This patch accumulates those fragmented scatterlists in a physically
contiguous bounce buffer so that we can issue bigger DMA data chunks
to/from the card.

When tested with a PCI-integrated host (1217:8221) that
only supports SDMA:
0b:00.0 SD Host controller: O2 Micro, Inc. OZ600FJ0/OZ900FJ0/OZ600FJS
        SD/MMC Card Reader Controller (rev 05)
This patch gave ~1Mbyte/s improved throughput on large reads and
writes when testing using iozone than without the patch.

dmesg:
sdhci-pci 0000:0b:00.0: SDHCI controller found [1217:8221] (rev 5)
mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
mmc0: SDHCI controller on PCI [0000:0b:00.0] using DMA

On the i.MX SDHCI controllers on the crippled i.MX 25 and i.MX 35
the patch restores the performance to what it was before we removed
the bounce buffers.

Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Benoît Thébaudeau <benoit@wsystem.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Benjamin Beckmeyer <beckmeyer.b@rittal.de>
Cc: stable@vger.kernel.org # v4.14+
Fixes: de3ee99b097d ("mmc: Delete bounce buffer handling")
Tested-by: Benjamin Beckmeyer <beckmeyer.b@rittal.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mbcache: initialize entry->e_referenced in mb_cache_entry_create()

commit 3876bbe27d04b848750d5310a37d6b76b593f648 upstream.

KMSAN reported use of uninitialized |entry->e_referenced| in a condition
in mb_cache_shrink():

==================================================================
BUG: KMSAN: use of uninitialized memory in mb_cache_shrink+0x3b4/0xc50 fs/mbcache.c:287
CPU: 2 PID: 816 Comm: kswapd1 Not tainted 4.11.0-rc5+ #2877
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:16 [inline]
 dump_stack+0x172/0x1c0 lib/dump_stack.c:52
 kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:927
 __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:469
 mb_cache_shrink+0x3b4/0xc50 fs/mbcache.c:287
 mb_cache_scan+0x67/0x80 fs/mbcache.c:321
 do_shrink_slab mm/vmscan.c:397 [inline]
 shrink_slab+0xc3d/0x12d0 mm/vmscan.c:500
 shrink_node+0x208f/0x2fd0 mm/vmscan.c:2603
 kswapd_shrink_node mm/vmscan.c:3172 [inline]
 balance_pgdat mm/vmscan.c:3289 [inline]
 kswapd+0x160f/0x2850 mm/vmscan.c:3478
 kthread+0x46c/0x5f0 kernel/kthread.c:230
 ret_from_fork+0x29/0x40 arch/x86/entry/entry_64.S:430
chained origin:
 save_stack_trace+0x37/0x40 arch/x86/kernel/stacktrace.c:59
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:302 [inline]
 kmsan_save_stack mm/kmsan/kmsan.c:317 [inline]
 kmsan_internal_chain_origin+0x12a/0x1f0 mm/kmsan/kmsan.c:547
 __msan_store_shadow_origin_1+0xac/0x110 mm/kmsan/kmsan_instr.c:257
 mb_cache_entry_create+0x3b3/0xc60 fs/mbcache.c:95
 ext4_xattr_cache_insert fs/ext4/xattr.c:1647 [inline]
 ext4_xattr_block_set+0x4c82/0x5530 fs/ext4/xattr.c:1022
 ext4_xattr_set_handle+0x1332/0x20a0 fs/ext4/xattr.c:1252
 ext4_xattr_set+0x4d2/0x680 fs/ext4/xattr.c:1306
 ext4_xattr_trusted_set+0x8d/0xa0 fs/ext4/xattr_trusted.c:36
 __vfs_setxattr+0x703/0x790 fs/xattr.c:149
 __vfs_setxattr_noperm+0x27a/0x6f0 fs/xattr.c:180
 vfs_setxattr fs/xattr.c:223 [inline]
 setxattr+0x6ae/0x790 fs/xattr.c:449
 path_setxattr+0x1eb/0x380 fs/xattr.c:468
 SYSC_lsetxattr+0x8d/0xb0 fs/xattr.c:490
 SyS_lsetxattr+0x77/0xa0 fs/xattr.c:486
 entry_SYSCALL_64_fastpath+0x13/0x94
origin:
 save_stack_trace+0x37/0x40 arch/x86/kernel/stacktrace.c:59
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:302 [inline]
 kmsan_internal_poison_shadow+0xb1/0x1a0 mm/kmsan/kmsan.c:198
 kmsan_kmalloc+0x7f/0xe0 mm/kmsan/kmsan.c:337
 kmem_cache_alloc+0x1c2/0x1e0 mm/slub.c:2766
 mb_cache_entry_create+0x283/0xc60 fs/mbcache.c:86
 ext4_xattr_cache_insert fs/ext4/xattr.c:1647 [inline]
 ext4_xattr_block_set+0x4c82/0x5530 fs/ext4/xattr.c:1022
 ext4_xattr_set_handle+0x1332/0x20a0 fs/ext4/xattr.c:1252
 ext4_xattr_set+0x4d2/0x680 fs/ext4/xattr.c:1306
 ext4_xattr_trusted_set+0x8d/0xa0 fs/ext4/xattr_trusted.c:36
 __vfs_setxattr+0x703/0x790 fs/xattr.c:149
 __vfs_setxattr_noperm+0x27a/0x6f0 fs/xattr.c:180
 vfs_setxattr fs/xattr.c:223 [inline]
 setxattr+0x6ae/0x790 fs/xattr.c:449
 path_setxattr+0x1eb/0x380 fs/xattr.c:468
 SYSC_lsetxattr+0x8d/0xb0 fs/xattr.c:490
 SyS_lsetxattr+0x77/0xa0 fs/xattr.c:486
 entry_SYSCALL_64_fastpath+0x13/0x94
==================================================================

Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: stable@vger.kernel.org # v4.6
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc-opal: Fix handling of firmware error codes, prevent busy loops

commit 5b8b58063029f02da573120ef4dc9079822e3cda upstream.

According to the OPAL docs:
  skiboot-5.2.5/doc/opal-api/opal-rtc-read-3.txt
  skiboot-5.2.5/doc/opal-api/opal-rtc-write-4.txt

OPAL_HARDWARE may be returned from OPAL_RTC_READ or OPAL_RTC_WRITE and
this indicates either a transient or permanent error.

Prior to this patch, Linux was not dealing with OPAL_HARDWARE being a
permanent error particularly well, in that you could end up in a busy
loop.

This was not too hard to trigger on an AMI BMC based OpenPOWER machine
doing a continuous "ipmitool mc reset cold" to the BMC, the result of
that being that we'd get stuck in an infinite loop in
opal_get_rtc_time().

We now retry a few times before returning the error higher up the
stack.

Fixes: 16b1d26e77b1 ("rtc/tpo: Driver to support rtc and wakeup on PowerNV platform")
Cc: stable@vger.kernel.org # v3.19+
Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: adjust tested variable

commit 3a61b527b4e1f285d21b6e9e623dc45cf8bb391f upstream.

Check the variable that was most recently initialized.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression x, y, f, g, e, m;
statement S1,S2,S3,S4;
@@

x = f(...);
if (\(<+...x...+>\&e\)) S1 else S2
(
x = g(...);
|
m = g(...,&x,...);
|
y = g(...);
*if (e)
 S3 else S4
)
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: Add dpm quirk for Jet PRO (v2)

commit 239b5f64e12b1f09f506c164dff0374924782979 upstream.

Fixes stability issues.

v2: clamp sclk to 600 Mhz

Bug: https://bugs.freedesktop.org/show_bug.cgi?id=103370
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Add missing Falkor part number for branch predictor hardening

commit 16e574d762ac5512eb922ac0ac5eed360b7db9d8 upstream.

References to CPU part number MIDR_QCOM_FALKOR were dropped from the
mailing list patch due to mainline/arm64 branch dependency. So this
patch adds the missing part number.

Fixes: ec82b567a74f ("arm64: Implement branch predictor hardening for Falkor")
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ast: Load lut in crtc_commit

commit 24b8ef699e8221d2b7f813adaab13eec053e1507 upstream.

In the past the ast driver relied upon the fbdev emulation helpers to
call ->load_lut at boot-up. But since

commit b8e2b0199cc377617dc238f5106352c06dcd3fa2
Author: Peter Rosin <peda@axentia.se>
Date:   Tue Jul 4 12:36:57 2017 +0200

    drm/fb-helper: factor out pseudo-palette

that's cleaned up and drivers are expected to boot into a consistent
lut state. This patch fixes that.

Fixes: b8e2b0199cc3 ("drm/fb-helper: factor out pseudo-palette")
Cc: Peter Rosin <peda@axenita.se>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.14+
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=198123
Cc: Bill Fraser <bill.fraser@gmail.com>
Reported-and-Tested-by: Bill Fraser <bill.fraser@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/powerplay: Fix smu_table_entry.handle type

commit adab595d16abe48e9c097f000bf8921d35b28fb7 upstream.

The handle describes kernel logical address, should be
unsigned long and not uint32_t.
Fixes KASAN error and GFP on driver unload.

Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/qxl: unref cursor bo when finished with it

commit 16c6db3688734b27487a42d0c2a1062d0b2bad03 upstream.

qxl_cursor_atomic_update allocs a bo for the cursor that
it never frees up at the end of the function.

This commit fixes that.

Signed-off-by: Ray Strode <rstrode@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ttm: Fix 'buf' pointer update in ttm_bo_vm_access_kmap() (v2)

commit 95244db2d3f743f37e69446a2807dd1a42750542 upstream.

The buf pointer was not being incremented inside the loop
meaning the same block of data would be read or written
repeatedly.
(v2) Change 'buf' pointer to uint8_t* type

Cc: stable@vger.kernel.org
Fixes: 09ac4fcb3f25 ("drm/ttm: Implement vm_operations_struct.access v2")

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ttm: Don't add swapped BOs to swap-LRU list

commit fd5002d6a3c602664b07668a24df4ef7a43bf078 upstream.

A BO that's already swapped would be added back to the swap-LRU list
for example if its validation failed under high memory pressure. This
could later lead to swapping it out again and leaking previous swap
storage.

This commit adds a condition to prevent that from happening.

v2: Check page_flags instead of swap_storage

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry/64: Fix CR3 restore in paranoid_exit()

commit e48657573481a5dff7cfdc3d57005c80aa816500 upstream.

Josh Poimboeuf noticed the following bug:

 "The paranoid exit code only restores the saved CR3 when it switches back
  to the user GS.  However, even in the kernel GS case, it's possible that
  it needs to restore a user CR3, if for example, the paranoid exception
  occurred in the syscall exit path between SWITCH_TO_USER_CR3_STACK and
  SWAPGS."

Josh also confirmed via targeted testing that it's possible to hit this bug.

Fix the bug by also restoring CR3 in the paranoid_exit_no_swapgs branch.

The reason we haven't seen this bug reported by users yet is probably because
"paranoid" entry points are limited to the following cases:

 idtentry double_fault       do_double_fault  has_error_code=1  paranoid=2
 idtentry debug              do_debug         has_error_code=0  paranoid=1 shift_ist=DEBUG_STACK
 idtentry int3               do_int3          has_error_code=0  paranoid=1 shift_ist=DEBUG_STACK
 idtentry machine_check      do_mce           has_error_code=0  paranoid=1

Amongst those entry points only machine_check is one that will interrupt an
IRQS-off critical section asynchronously - and machine check events are rare.

The other main asynchronous entries are NMI entries, which can be very high-freq
with perf profiling, but they are special: they don't use the 'idtentry' macro but
are open coded and restore user CR3 unconditionally so don't have this bug.

Reported-and-tested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180214073910.boevmg65upbk3vqb@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/cpu: Change type of x86_cache_size variable to unsigned int

commit 24dbc6000f4b9b0ef5a9daecb161f1907733765a upstream.

Currently, x86_cache_size is of type int, which makes no sense as we
will never have a valid cache size equal or less than 0. So instead of
initializing this variable to -1, it can perfectly be initialized to 0
and use it as an unsigned variable instead.

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Addresses-Coverity-ID: 1464429
Link: http://lkml.kernel.org/r/20180213192208.GA26414@embeddedor.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/spectre: Fix an error message

commit 9de29eac8d2189424d81c0d840cd0469aa3d41c8 upstream.

If i == ARRAY_SIZE(mitigation_options) then we accidentally print
garbage from one space beyond the end of the mitigation_options[] array.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: KarimAllah Ahmed <karahmed@amazon.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-janitors@vger.kernel.org
Fixes: 9005c6834c0f ("x86/spectre: Simplify spectre_v2 command line parsing")
Link: http://lkml.kernel.org/r/20180214071416.GA26677@mwanda
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_stepping

commit b399151cb48db30ad1e0e93dd40d68c6d007b637 upstream.

x86_mask is a confusing name which is hard to associate with the
processor's stepping.

Additionally, correct an indent issue in lib/cpu.c.

Signed-off-by: Jia Zhang <qianyue.zj@alibaba-inc.com>
[ Updated it to more recent kernels. ]
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: tony.luck@intel.com
Link: http://lkml.kernel.org/r/1514771530-70829-1-git-send-email-qianyue.zj@alibaba-inc.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/x86/mpx: Fix incorrect bounds with old _sigfault

commit 961888b1d76d84efc66a8f5604b06ac12ac2f978 upstream.

For distributions with old userspace header files, the _sigfault
structure is different. mpx-mini-test fails with the following
error:

  [root@Purley]# mpx-mini-test_64 tabletest
  XSAVE is supported by HW & OS
  XSAVE processor supported state mask: 0x2ff
  XSAVE OS supported state mask: 0x2ff
   BNDREGS: size: 64 user: 1 supervisor: 0 aligned: 0
    BNDCSR: size: 64 user: 1 supervisor: 0 aligned: 0
  starting mpx bounds table test
  ERROR: siginfo bounds do not match shadow bounds for register 0

Fix it by using the correct offset of _lower/_upper in _sigfault.
RHEL needs this patch to work.

Signed-off-by: Rui Wang <rui.y.wang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave.hansen@linux.intel.com
Fixes: e754aedc26ef ("x86/mpx, selftests: Add MPX self test")
Link: http://lkml.kernel.org/r/1513586050-1641-1-git-send-email-rui.y.wang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Rename flush_tlb_single() and flush_tlb_one() to __flush_tlb_one_[user|kernel]()

commit 1299ef1d8870d2d9f09a5aadf2f8b2c887c2d033 upstream.

flush_tlb_single() and flush_tlb_one() sound almost identical, but
they really mean "flush one user translation" and "flush one kernel
translation".  Rename them to flush_tlb_one_user() and
flush_tlb_one_kernel() to make the semantics more obvious.

[ I was looking at some PTI-related code, and the flush-one-address code
  is unnecessarily hard to understand because the names of the helpers are
  uninformative.  This came up during PTI review, but no one got around to
  doing it. ]

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux-MM <linux-mm@kvack.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/3303b02e3c3d049dc5235d5651e0ae6d29a34354.1517414378.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kmemcheck: rip it out for real

commit f335195adf043168ee69d78ea72ac3e30f0c57ce upstream.

Commit 4675ff05de2d ("kmemcheck: rip it out") has removed the code but
for some reason SPDX header stayed in place.  This looks like a rebase
mistake in the mmotm tree or the merge mistake.  Let's drop those
leftovers as well.

Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kmemcheck: rip it out

commit 4675ff05de2d76d167336b368bd07f3fef6ed5a6 upstream.

Fix up makefiles, remove references, and git rm kmemcheck.

Link: http://lkml.kernel.org/r/20171007030159.22241-4-alexander.levin@verizon.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Tim Hansen <devtimhansen@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kmemcheck: remove whats left of NOTRACK flags

commit d8be75663cec0069b85f80191abd2682ce4a512f upstream.

Now that kmemcheck is gone, we don't need the NOTRACK flags.

Link: http://lkml.kernel.org/r/20171007030159.22241-5-alexander.levin@verizon.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Hansen <devtimhansen@gmail.com>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kmemcheck: stop using GFP_NOTRACK and SLAB_NOTRACK

commit 75f296d93bcebcfe375884ddac79e30263a31766 upstream.

Convert all allocations that used a NOTRACK flag to stop using it.

Link: http://lkml.kernel.org/r/20171007030159.22241-3-alexander.levin@verizon.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Hansen <devtimhansen@gmail.com>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kmemcheck: remove annotations

commit 4950276672fce5c241857540f8561c440663673d upstream.

Patch series "kmemcheck: kill kmemcheck", v2.

As discussed at LSF/MM, kill kmemcheck.

KASan is a replacement that is able to work without the limitation of
kmemcheck (single CPU, slow).  KASan is already upstream.

We are also not aware of any users of kmemcheck (or users who don't
consider KASan as a suitable replacement).

The only objection was that since KASAN wasn't supported by all GCC
versions provided by distros at that time we should hold off for 2
years, and try again.

Now that 2 years have passed, and all distros provide gcc that supports
KASAN, kill kmemcheck again for the very same reasons.

This patch (of 4):

Remove kmemcheck annotations, and calls to kmemcheck from the kernel.

[alexander.levin@verizon.com: correctly remove kmemcheck call from dma_map_sg_attrs]
Link: http://lkml.kernel.org/r/20171012192151.26531-1-alexander.levin@verizon.com
Link: http://lkml.kernel.org/r/20171007030159.22241-2-alexander.levin@verizon.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Hansen <devtimhansen@gmail.com>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation: Add <asm/msr-index.h> dependency

commit ea00f301285ea2f07393678cd2b6057878320c9d upstream.

Joe Konno reported a compile failure resulting from using an MSR
without inclusion of <asm/msr-index.h>, and while the current code builds
fine (by accident) this needs fixing for future patches.

Reported-by: Joe Konno <joe.konno@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arjan@linux.intel.com
Cc: bp@alien8.de
Cc: dan.j.williams@intel.com
Cc: dave.hansen@linux.intel.com
Cc: dwmw2@infradead.org
Cc: dwmw@amazon.co.uk
Cc: gregkh@linuxfoundation.org
Cc: hpa@zytor.com
Cc: jpoimboe@redhat.com
Cc: linux-tip-commits@vger.kernel.org
Cc: luto@kernel.org
Fixes: 20ffa1caecca ("x86/speculation: Add basic IBPB (Indirect Branch Prediction Barrier) support")
Link: http://lkml.kernel.org/r/20180213132819.GJ25201@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nospec: Move array_index_nospec() parameter checking into separate macro

commit 8fa80c503b484ddc1abbd10c7cb2ab81f3824a50 upstream.

For architectures providing their own implementation of
array_index_mask_nospec() in asm/barrier.h, attempting to use WARN_ONCE() to
complain about out-of-range parameters using WARN_ON() results in a mess
of mutually-dependent include files.

Rather than unpick the dependencies, simply have the core code in nospec.h
perform the checking for us.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1517840166-15399-1-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation: Fix up array_index_nospec_mask() asm constraint

commit be3233fbfcb8f5acb6e3bcd0895c3ef9e100d470 upstream.

Allow the compiler to handle @size as an immediate value or memory
directly rather than allocating a register.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/151797010204.1289.1510000292250184993.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/debug: Use UD2 for WARN()

commit 3b3a371cc9bc980429baabe0a8e5f307f3d1f463 upstream.

Since the Intel SDM added an ModR/M byte to UD0 and binutils followed
that specification, we now cannot disassemble our kernel anymore.

This now means Intel and AMD disagree on the encoding of UD0. And instead
of playing games with additional bytes that are valid ModR/M and single
byte instructions (0xd6 for instance), simply use UD2 for both WARN() and
BUG().

Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180208194406.GD25181@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/debug, objtool: Annotate WARN()-related UD2 as reachable

commit 2b5db66862b95532cb6cca8165ae6eb73633cf85 upstream.

By default, objtool assumes that a UD2 is a dead end.  This is mainly
because GCC 7+ sometimes inserts a UD2 when it detects a divide-by-zero
condition.

Now that WARN() is moving back to UD2, annotate the code after it as
reachable so objtool can follow the code flow.

Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kbuild test robot <fengguang.wu@intel.com>
Link: http://lkml.kernel.org/r/0e483379275a42626ba8898117f918e1bf661e40.1518130694.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

objtool: Fix segfault in ignore_unreachable_insn()

commit fe24e27128252c230a34a6c628da2bf1676781ea upstream.

Peter Zijlstra's patch for converting WARN() to use UD2 triggered a
bunch of false "unreachable instruction" warnings, which then triggered
a seg fault in ignore_unreachable_insn().

The seg fault happened when it tried to dereference a NULL 'insn->func'
pointer.  Thanks to static_cpu_has(), some functions can jump to a
non-function area in the .altinstr_aux section.  That breaks
ignore_unreachable_insn()'s assumption that it's always inside the
original function.

Make sure ignore_unreachable_insn() only follows jumps within the
current function.

Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kbuild test robot <fengguang.wu@intel.com>
Link: http://lkml.kernel.org/r/bace77a60d5af9b45eddb8f8fb9c776c8de657ef.1518130694.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/x86: Disable tests requiring 32-bit support on pure 64-bit systems

commit 9279ddf23ce78ff2676e8e8e19fec0f022c26d04 upstream.

The ldt_gdt and ptrace_syscall selftests, even in their 64-bit variant, use
hard-coded 32-bit syscall numbers and call "int $0x80".

This will fail on 64-bit systems with CONFIG_IA32_EMULATION=y disabled.

Therefore, do not build these tests if we cannot build 32-bit binaries
(which should be a good approximation for CONFIG_IA32_EMULATION=y being enabled).

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kselftest@vger.kernel.org
Cc: shuah@kernel.org
Link: http://lkml.kernel.org/r/20180211111013.16888-6-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/x86: Do not rely on "int $0x80" in single_step_syscall.c

commit 4105c69703cdeba76f384b901712c9397b04e9c2 upstream.

On 64-bit builds, we should not rely on "int $0x80" working (it only does if
CONFIG_IA32_EMULATION=y is enabled). To keep the "Set TF and check int80"
test running on 64-bit installs with CONFIG_IA32_EMULATION=y enabled, build
this test only if we can also build 32-bit binaries (which should be a
good approximation for that).

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kselftest@vger.kernel.org
Cc: shuah@kernel.org
Link: http://lkml.kernel.org/r/20180211111013.16888-5-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/x86: Do not rely on "int $0x80" in test_mremap_vdso.c

commit 2cbc0d66de0480449c75636f55697c7ff3af61fc upstream.

On 64-bit builds, we should not rely on "int $0x80" working (it only does if
CONFIG_IA32_EMULATION=y is enabled).

Without this patch, the move test may succeed, but the "int $0x80" causes
a segfault, resulting in a false negative output of this self-test.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kselftest@vger.kernel.org
Cc: shuah@kernel.org
Link: http://lkml.kernel.org/r/20180211111013.16888-4-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/x86/pkeys: Remove unused functions

commit ce676638fe7b284132a7d7d5e7e7ad81bab9947e upstream.

This also gets rid of two build warnings:

  protection_keys.c: In function ‘dumpit’:
  protection_keys.c:419:3: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
     write(1, buf, nr_read);
     ^~~~~~~~~~~~~~~~~~~~~~

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/x86: Clean up and document sscanf() usage

commit d8e92de8ef952bed88c56c7a44c02d8dcae0984e upstream.

Replace a couple of magically connected buffer length literal constants with
a common definition that makes their relationship obvious. Also document
why our sscanf() usage is safe.

No intended functional changes.

Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Andrew Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kselftest@vger.kernel.org
Cc: shuah@kernel.org
Link: http://lkml.kernel.org/r/20180211205924.GA23210@light.dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/x86: Fix vDSO selftest segfault for vsyscall=none

commit 198ee8e17502da2634f7366395db1d77630e0219 upstream.

The vDSO selftest tries to execute a vsyscall unconditionally, even if it
is not present on the test system (e.g. if booted with vsyscall=none or
with CONFIG_LEGACY_VSYSCALL_NONE=y set. Fix this by copying (and tweaking)
the vsyscall check from test_vsyscall.c

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Andrew Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kselftest@vger.kernel.org
Cc: shuah@kernel.org
Link: http://lkml.kernel.org/r/20180211111013.16888-3-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry/64: Remove the unused 'icebp' macro

commit b498c261107461d5c42140dfddd05df83d8ca078 upstream.

That macro was touched around 2.5.8 times, judging by the full history
linux repo, but it was unused even then. Get rid of it already.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux@dominikbrodowski.net
Link: http://lkml.kernel.org/r/20180212201318.GD14640@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry/64: Fix paranoid_entry() frame pointer warning

commit b3ccefaed922529e6a67de7b30af5aa38c76ace9 upstream.

With the following commit:

  f09d160992d1 ("x86/entry/64: Get rid of the ALLOC_PT_GPREGS_ON_STACK and SAVE_AND_CLEAR_REGS macros")

... one of my suggested improvements triggered a frame pointer warning:

  arch/x86/entry/entry_64.o: warning: objtool: paranoid_entry()+0x11: call without frame pointer save/setup

The warning is correct for the build-time code, but it's actually not
relevant at runtime because of paravirt patching.  The paravirt swapgs
call gets replaced with either a SWAPGS instruction or NOPs at runtime.

Go back to the previous behavior by removing the ELF function annotation
for paranoid_entry() and adding an unwind hint, which effectively
silences the warning.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kbuild-all@01.org
Cc: tipbuild@zytor.com
Fixes: f09d160992d1 ("x86/entry/64: Get rid of the ALLOC_PT_GPREGS_ON_STACK and SAVE_AND_CLEAR_REGS macros")
Link: http://lkml.kernel.org/r/20180212174503.5acbymg5z6p32snu@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry/64: Indent PUSH_AND_CLEAR_REGS and POP_REGS properly

commit 92816f571af81e9a71cc6f3dc8ce1e2fcdf7b6b8 upstream.

... same as the other macros in arch/x86/entry/calling.h

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dan.j.williams@intel.com
Link: http://lkml.kernel.org/r/20180211104949.12992-8-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry/64: Get rid of the ALLOC_PT_GPREGS_ON_STACK and SAVE_AND_CLEAR_REGS macros

commit dde3036d62ba3375840b10ab9ec0d568fd773b07 upstream.

Previously, error_entry() and paranoid_entry() saved the GP registers
onto stack space previously allocated by its callers. Combine these two
steps in the callers, and use the generic PUSH_AND_CLEAR_REGS macro
for that.

This adds a significant amount ot text size. However, Ingo Molnar points
out that:

"these numbers also _very_ significantly over-represent the
extra footprint. The assumptions that resulted in
us compressing the IRQ entry code have changed very
significantly with the new x86 IRQ allocation code we
introduced in the last year:

- IRQ vectors are usually populated in tightly clustered
  groups.

  With our new vector allocator code the typical per CPU
  allocation percentage on x86 systems is ~3 device vectors
  and ~10 fixed vectors out of ~220 vectors - i.e. a very
  low ~6% utilization (!). [...]

  The days where we allocated a lot of vectors on every
  CPU and the compression of the IRQ entry code text
  mattered are over.

- Another issue is that only a small minority of vectors
  is frequent enough to actually matter to cache utilization
  in practice: 3-4 key IPIs and 1-2 device IRQs at most - and
  those vectors tend to be tightly clustered as well into about
  two groups, and are probably already on 2-3 cache lines in
  practice.

  For the common case of 'cache cold' IRQs it's the depth of
  the call chain and the fragmentation of the resulting I$
  that should be the main performance limit - not the overall
  size of it.

- The CPU side cost of IRQ delivery is still very expensive
  even in the best, most cached case, as in 'over a thousand
  cycles'. So much stuff is done that maybe contemporary x86
  IRQ entry microcode already prefetches the IDT entry and its
  expected call target address."[*]

[*] http://lkml.kernel.org/r/20180208094710.qnjixhm6hybebdv7@gmail.com

The "testb $3, CS(%rsp)" instruction in the idtentry macro does not need
modification. Previously, %rsp was manually decreased by 15*8; with
this patch, %rsp is decreased by 15 pushq instructions.

[jpoimboe@redhat.com: unwind hint improvements]

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dan.j.williams@intel.com
Link: http://lkml.kernel.org/r/20180211104949.12992-7-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry/64: Use PUSH_AND_CLEAN_REGS in more cases

commit 30907fd13bb593202574bb20af58d67c70a1ee14 upstream.

entry_SYSCALL_64_after_hwframe() and nmi() can be converted to use
PUSH_AND_CLEAN_REGS instead of opencoded variants thereof. Due to
the interleaving, the additional XOR-based clearing of R8 and R9
in entry_SYSCALL_64_after_hwframe() should not have any noticeable
negative implications.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dan.j.williams@intel.com
Link: http://lkml.kernel.org/r/20180211104949.12992-6-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry/64: Introduce the PUSH_AND_CLEAN_REGS macro

commit 3f01daecd545e818098d84fd1ad43e19a508d705 upstream.

Those instances where ALLOC_PT_GPREGS_ON_STACK is called just before
SAVE_AND_CLEAR_REGS can trivially be replaced by PUSH_AND_CLEAN_REGS.
This macro uses PUSH instead of MOV and should therefore be faster, at
least on newer CPUs.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dan.j.williams@intel.com
Link: http://lkml.kernel.org/r/20180211104949.12992-5-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry/64: Interleave XOR register clearing with PUSH instructions

commit f7bafa2b05ef25eda1d9179fd930b0330cf2b7d1 upstream.

Same as is done for syscalls, interleave XOR with PUSH instructions
for exceptions/interrupts, in order to minimize the cost of the
additional instructions required for register clearing.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dan.j.williams@intel.com
Link: http://lkml.kernel.org/r/20180211104949.12992-4-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry/64: Merge the POP_C_REGS and POP_EXTRA_REGS macros into a single POP_REGS macro

commit 502af0d70843c2a9405d7ba1f79b4b0305aaf5f5 upstream.

The two special, opencoded cases for POP_C_REGS can be handled by ASM
macros.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dan.j.williams@intel.com
Link: http://lkml.kernel.org/r/20180211104949.12992-3-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry/64: Merge SAVE_C_REGS and SAVE_EXTRA_REGS, remove unused extensions

commit 2e3f0098bc45f710a2f4cbcc94b80a1fae7a99a1 upstream.

All current code paths call SAVE_C_REGS and then immediately
SAVE_EXTRA_REGS. Therefore, merge these two macros and order the MOV
sequeneces properly.

While at it, remove the macros to save all except specific registers,
as these macros have been unused for a long time.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dan.j.williams@intel.com
Link: http://lkml.kernel.org/r/20180211104949.12992-2-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry/64: Clear registers for exceptions/interrupts, to reduce speculation attack surface

commit 3ac6d8c787b835b997eb23e43e09aa0895ef7d58 upstream.

Clear the 'extra' registers on entering the 64-bit kernel for exceptions
and interrupts. The common registers are not cleared since they are
likely clobbered well before they can be exploited in a speculative
execution attack.

Originally-From: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/151787989146.7847.15749181712358213254.stgit@dwillia2-desk3.amr.corp.intel.com
[ Made small improvements to the changelog and the code comments. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM: cpuidle: Fix cpuidle_poll_state_init() prototype

commit d7212cfb05ba802bea4dd6c90d61cfe6366ea224 upstream.

Commit f85942207516 (x86: PM: Make APM idle driver initialize polling
state) made apm_init() call cpuidle_poll_state_init(), but that only
is defined for CONFIG_CPU_IDLE set, so make the empty stub of it
available for CONFIG_CPU_IDLE unset too to fix the resulting build
issue.

Fixes: f85942207516 (x86: PM: Make APM idle driver initialize polling state)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / runtime: Update links_count also if !CONFIG_SRCU

commit 433986c2c265d106d6a8e88006e0131fefc92b7b upstream.

Commit baa8809f6097 (PM / runtime: Optimize the use of device links)
added an invocation of pm_runtime_drop_link() to __device_link_del().
However there are two variants of that function, one for CONFIG_SRCU and
another for !CONFIG_SRCU, and the commit only modified the former.

Fixes: baa8809f6097 (PM / runtime: Optimize the use of device links)
Cc: v4.10+ <stable@vger.kernel.org> # v4.10+
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation: Clean up various Spectre related details

commit 21e433bdb95bdf3aa48226fd3d33af608437f293 upstream.

Harmonize all the Spectre messages so that a:

    dmesg | grep -i spectre

... gives us most Spectre related kernel boot messages.

Also fix a few other details:

 - clarify a comment about firmware speculation control

 - s/KPTI/PTI

 - remove various line-breaks that made the code uglier

Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM/nVMX: Set the CPU_BASED_USE_MSR_BITMAPS if we have a valid L02 MSR bitmap

commit 3712caeb14dcb33fb4d5114f14c0beef10aca101 upstream.

We either clear the CPU_BASED_USE_MSR_BITMAPS and end up intercepting all
MSR accesses or create a valid L02 MSR bitmap and use that. This decision
has to be made every time we evaluate whether we are going to generate the
L02 MSR bitmap.

Before commit:

  d28b387fb74d ("KVM/VMX: Allow direct access to MSR_IA32_SPEC_CTRL")

... this was probably OK since the decision was always identical.

This is no longer the case now since the MSR bitmap might actually
change once we decide to not intercept SPEC_CTRL and PRED_CMD.

Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arjan.van.de.ven@intel.com
Cc: dave.hansen@intel.com
Cc: jmattson@google.com
Cc: kvm@vger.kernel.org
Cc: sironi@amazon.de
Link: http://lkml.kernel.org/r/1518305967-31356-6-git-send-email-dwmw@amazon.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

X86/nVMX: Properly set spec_ctrl and pred_cmd before merging MSRs

commit 206587a9fb764d71f035dc7f6d3b6488f5d5b304 upstream.

These two variables should check whether SPEC_CTRL and PRED_CMD are
supposed to be passed through to L2 guests or not. While
msr_write_intercepted_l01 would return 'true' if it is not passed through.

So just invert the result of msr_write_intercepted_l01 to implement the
correct semantics.

Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Jim Mattson <jmattson@google.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arjan.van.de.ven@intel.com
Cc: dave.hansen@intel.com
Cc: kvm@vger.kernel.org
Cc: sironi@amazon.de
Fixes: 086e7d4118cc ("KVM: VMX: Allow direct access to MSR_IA32_SPEC_CTRL")
Link: http://lkml.kernel.org/r/1518305967-31356-5-git-send-email-dwmw@amazon.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM/x86: Reduce retpoline performance impact in slot_handle_level_range(), by always inlining iterator helper methods

commit 928a4c39484281f8ca366f53a1db79330d058401 upstream.

With retpoline, tight loops of "call this function for every XXX" are
very much pessimised by taking a prediction miss *every* time. This one
is by far the biggest contributor to the guest launch time with retpoline.

By marking the iterator slot_handle_…() functions always_inline, we can
ensure that the indirect function call can be optimised away into a
direct call and it actually generates slightly smaller code because
some of the other conditionals can get optimised away too.

Performance is now pretty close to what we see with nospectre_v2 on
the command line.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Filippo Sironi <sironi@amazon.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Filippo Sironi <sironi@amazon.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arjan.van.de.ven@intel.com
Cc: dave.hansen@intel.com
Cc: jmattson@google.com
Cc: karahmed@amazon.de
Cc: kvm@vger.kernel.org
Cc: rkrcmar@redhat.com
Link: http://lkml.kernel.org/r/1518305967-31356-4-git-send-email-dwmw@amazon.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "x86/speculation: Simplify indirect_branch_prediction_barrier()"

commit f208820a321f9b23d77d7eed89945d862d62a3ed upstream.

This reverts commit 64e16720ea0879f8ab4547e3b9758936d483909b.

We cannot call C functions like that, without marking all the
call-clobbered registers as, well, clobbered. We might have got away
with it for now because the __ibp_barrier() function was *fairly*
unlikely to actually use any other registers. But no. Just no.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arjan.van.de.ven@intel.com
Cc: dave.hansen@intel.com
Cc: jmattson@google.com
Cc: karahmed@amazon.de
Cc: kvm@vger.kernel.org
Cc: pbonzini@redhat.com
Cc: rkrcmar@redhat.com
Cc: sironi@amazon.de
Link: http://lkml.kernel.org/r/1518305967-31356-3-git-send-email-dwmw@amazon.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation: Correct Speculation Control microcode blacklist again

commit d37fc6d360a404b208547ba112e7dabb6533c7fc upstream.

Arjan points out that the Intel document only clears the 0xc2 microcode
on *some* parts with CPUID 506E3 (INTEL_FAM6_SKYLAKE_DESKTOP stepping 3).
For the Skylake H/S platform it's OK but for Skylake E3 which has the
same CPUID it isn't (yet) cleared.

So removing it from the blacklist was premature. Put it back for now.

Also, Arjan assures me that the 0x84 microcode for Kaby Lake which was
featured in one of the early revisions of the Intel document was never
released to the public, and won't be until/unless it is also validated
as safe. So those can change to 0x80 which is what all *other* versions
of the doc have identified.

Once the retrospective testing of existing public microcodes is done, we
should be back into a mode where new microcodes are only released in
batches and we shouldn't even need to update the blacklist for those
anyway, so this tweaking of the list isn't expected to be a thing which
keeps happening.

Requested-by: Arjan van de Ven <arjan.van.de.ven@intel.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arjan.van.de.ven@intel.com
Cc: dave.hansen@intel.com
Cc: kvm@vger.kernel.org
Cc: pbonzini@redhat.com
Link: http://lkml.kernel.org/r/1518449255-2182-1-git-send-email-dwmw@amazon.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation: Update Speculation Control microcode blacklist

commit 1751342095f0d2b36fa8114d8e12c5688c455ac4 upstream.

Intel have retroactively blessed the 0xc2 microcode on Skylake mobile
and desktop parts, and the Gemini Lake 0x22 microcode is apparently fine
too. We blacklisted the latter purely because it was present with all
the other problematic ones in the 2018-01-08 release, but now it's
explicitly listed as OK.

We still list 0x84 for the various Kaby Lake / Coffee Lake parts, as
that appeared in one version of the blacklist and then reverted to
0x80 again. We can change it if 0x84 is actually announced to be safe.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arjan.van.de.ven@intel.com
Cc: jmattson@google.com
Cc: karahmed@amazon.de
Cc: kvm@vger.kernel.org
Cc: pbonzini@redhat.com
Cc: rkrcmar@redhat.com
Cc: sironi@amazon.de
Link: http://lkml.kernel.org/r/1518305967-31356-2-git-send-email-dwmw@amazon.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm/pti: Fix PTI comment in entry_SYSCALL_64()

commit 14b1fcc62043729d12e8ae00f8297ab2ffe9fa91 upstream.

The comment is confusing since the path is taken when
CONFIG_PAGE_TABLE_ISOLATION=y is disabled (while the comment says it is not
taken).

Signed-off-by: Nadav Amit <namit@vmware.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: nadav.amit@gmail.com
Link: http://lkml.kernel.org/r/20180209170638.15161-1-namit@vmware.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/mm/radix: Split linear mapping on hot-unplug

commit 4dd5f8a99e791a8c6500e3592f3ce81ae7edcde1 upstream.

This patch splits the linear mapping if the hot-unplug range is
smaller than the mapping size. The code detects if the mapping needs
to be split into a smaller size and if so, uses the stop machine
infrastructure to clear the existing mapping and then remap the
remaining range using a smaller page size.

The code will skip any region of the mapping that overlaps with kernel
text and warn about it once. We don't want to remove a mapping where
the kernel text and the LMB we intend to remove overlap in the same
TLB mapping as it may affect the currently executing code.

I've tested these changes under a kvm guest with 2 vcpus, from a split
mapping point of view, some of the caveats mentioned above applied to
the testing I did.

Fixes: 4b5d62ca17a1 ("powerpc/mm: add radix__remove_section_mapping()")
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
[mpe: Tweak change log to match updated behaviour]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: sun4i_ss_prng - convert lock to _bh in sun4i_ss_prng_generate

commit 2e7d1d61ea6c0f1c4da5eb82cafac750d55637a7 upstream.

Lockdep detects a possible deadlock in sun4i_ss_prng_generate() and
throws an "inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage" warning.
Disabling softirqs to fix this.

Fixes: b8ae5c7387ad ("crypto: sun4i-ss - support the Security System PRNG")
Signed-off-by: Artem Savkov <artem.savkov@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: sun4i_ss_prng - fix return value of sun4i_ss_prng_generate

commit dd78c832ffaf86eb6434e56de4bc3bc31f03f771 upstream.

According to crypto/rng.h generate function should return 0 on success
and < 0 on error.

Fixes: b8ae5c7387ad ("crypto: sun4i-ss - support the Security System PRNG")
Signed-off-by: Artem Savkov <artem.savkov@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

compiler-gcc.h: __nostackprotector needs gcc-4.4 and up

commit d9afaaa4ff7af8b87d4a205e48cb8a6f666d7f01 upstream.

Gcc versions before 4.4 do not recognize the __optimize__ compiler
attribute:

    warning: ‘__optimize__’ attribute directive ignored

Fixes: 7375ae3a0b79ea07 ("compiler-gcc.h: Introduce __nostackprotector function attribute")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

compiler-gcc.h: Introduce __optimize function attribute

commit df5d45aa08f848b79caf395211b222790534ccc7 upstream.

Create a new function attribute __optimize, which allows to specify an
optimization level on a per-function basis.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry/64/compat: Clear registers for compat syscalls, to reduce speculation attack surface

commit 6b8cf5cc9965673951f1ab3f0e3cf23d06e3e2ee upstream.

At entry userspace may have populated registers with values that could
otherwise be useful in a speculative execution attack. Clear them to
minimize the kernel's attack surface.

Originally-From: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/151787989697.7847.4083702787288600552.stgit@dwillia2-desk3.amr.corp.intel.com
[ Made small improvements to the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry/64: Clear extra registers beyond syscall arguments, to reduce speculation attack surface

commit 8e1eb3fa009aa7c0b944b3c8b26b07de0efb3200 upstream.

At entry userspace may have (maliciously) populated the extra registers
outside the syscall calling convention with arbitrary values that could
be useful in a speculative execution (Spectre style) attack.

Clear these registers to minimize the kernel's attack surface.

Note, this only clears the extra registers and not the unused
registers for syscalls less than 6 arguments, since those registers are
likely to be clobbered well before their values could be put to use
under speculation.

Note, Linus found that the XOR instructions can be executed with
minimized cost if interleaved with the PUSH instructions, and Ingo's
analysis found that R10 and R11 should be included in the register
clearing beyond the typical 'extra' syscall calling convention
registers.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/151787988577.7847.16733592218894189003.stgit@dwillia2-desk3.amr.corp.intel.com
[ Made small improvements to the changelog and the code comments. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86: PM: Make APM idle driver initialize polling state

commit f859422075165e32c00c8d75d63f300015cc07ae upstream.

Update the APM driver overlooked by commit 1b39e3f813b4 (cpuidle: Make
drivers initialize polling state) to initialize the polling state like
the other cpuidle drivers modified by that commit to prevent cpuidle
from crashing.

Fixes: 1b39e3f813b4 (cpuidle: Make drivers initialize polling state)
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/xen: init %gs very early to avoid page faults with stack protector

commit 4f277295e54c5b7340e48efea3fc5cc21a2872b7 upstream.

When running as Xen pv guest %gs is initialized some time after
C code is started. Depending on stack protector usage this might be
too late, resulting in page faults.

So setup %gs and MSR_GS_BASE in assembly code already.

Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Chris Patterson <cjp256@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/kexec: Make kexec (mostly) work in 5-level paging mode

commit 5bf30316991d5bcda046343ee77d823cf16fdd03 upstream.

Currently kexec() will crash when switching into a 5-level paging
enabled kernel.

I missed that we need to change relocate_kernel() to set CR4.LA57
flag if the kernel has 5-level paging enabled.

I avoided using #ifdef CONFIG_X86_5LEVEL here and inferred if we need to
enable 5-level paging from previous CR4 value. This way the code is
ready for boot-time switching between paging modes.

With this patch applied, in addition to kexec 4-to-4 which always worked,
we can kexec 4-to-5 and 5-to-5 - while 5-to-4 will need more work.

Reported-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Tested-by: Baoquan He <bhe@redhat.com>
Cc: <stable@vger.kernel.org> # v4.14+
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Fixes: 77ef56e4f0fb ("x86: Enable 5-level paging support via CONFIG_X86_5LEVEL=y")
Link: http://lkml.kernel.org/r/20180129110845.26633-1-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/gpu: add CFL to early quirks

commit 33aa69ed8aacd92dea12671e52eb3ca6ac2d7a49 upstream.

CFL was missing from intel_early_ids[]. The PCI ID needs to be there to
allow the memory region to be stolen, otherwise we could have RAM being
arbitrarily overwritten if for example we keep using the UEFI framebuffer,
depending on how BIOS has set up the e820 map.

Fixes: b056f8f3d6b9 ("drm/i915/cfl: Add Coffee Lake PCI IDs for S Skus.")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Cc: <stable@vger.kernel.org> # v4.13+ 0890540e21cf drm/i915: add GT number to intel_device_info
Cc: <stable@vger.kernel.org> # v4.13+ 41693fd52373 drm/i915/kbl: Change a KBL pci id to GT2 from GT1.5
Cc: <stable@vger.kernel.org> # v4.13+
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213200425.2954-1-lucas.demarchi@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>