OSDN Git Service
Daniel P. Berrange [Thu, 6 Aug 2015 14:35:55 +0000 (15:35 +0100)]
ui: fix return type for VNC I/O functions to be ssize_t
Various VNC server I/O functions return 'long' and then
also pass this to a method accepting 'int'. All these
should be ssize_t to match the signature of read/write
APIs and thus avoid potential for integer truncation /
wraparound.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Daniel P. Berrange [Mon, 2 Mar 2015 17:23:31 +0000 (17:23 +0000)]
crypto: introduce new module for handling TLS sessions
Introduce a QCryptoTLSSession object that will encapsulate
all the code for setting up and using a client/sever TLS
session. This isolates the code which depends on the gnutls
library, avoiding #ifdefs in the rest of the codebase, as
well as facilitating any possible future port to other TLS
libraries, if desired. It makes use of the previously
defined QCryptoTLSCreds object to access credentials to
use with the session. It also includes further unit tests
to validate the correctness of the TLS session handshake
and certificate validation. This is functionally equivalent
to the current TLS session handling code embedded in the
VNC server, and will obsolete it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Daniel P. Berrange [Mon, 13 Apr 2015 13:01:39 +0000 (14:01 +0100)]
crypto: add sanity checking of TLS x509 credentials
If the administrator incorrectly sets up their x509 certificates,
the errors seen at runtime during connection attempts are very
obscure and difficult to diagnose. This has been a particular
problem for people using openssl to generate their certificates
instead of the gnutls certtool, because the openssl tools don't
turn on the various x509 extensions that gnutls expects to be
present by default.
This change thus adds support in the TLS credentials object to
sanity check the certificates when QEMU first loads them. This
gives the administrator immediate feedback for the majority of
common configuration mistakes, reducing the pain involved in
setting up TLS. The code is derived from equivalent code that
has been part of libvirt's TLS support and has been seen to be
valuable in assisting admins.
It is possible to disable the sanity checking, however, via
the new 'sanity-check' property on the tls-creds object type,
with a value of 'no'.
Unit tests are included in this change to verify the correctness
of the sanity checking code in all the key scenarios it is
intended to cope with. As part of the test suite, the pkix_asn1_tab.c
from gnutls is imported. This file is intentionally copied from the
(long since obsolete) gnutls 1.6.3 source tree, since that version
was still under GPLv2+, rather than the GPLv3+ of gnutls >= 2.0.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Daniel P. Berrange [Fri, 13 Mar 2015 17:39:26 +0000 (17:39 +0000)]
crypto: introduce new module for TLS x509 credentials
Introduce a QCryptoTLSCredsX509 class which is used to
manage x509 certificate TLS credentials. This will be
the preferred credential type offering strong security
characteristics
Example CLI configuration:
$QEMU -object tls-creds-x509,id=tls0,endpoint=server,\
dir=/path/to/creds/dir,verify-peer=yes
The 'id' value in the -object args will be used to associate the
credentials with the network services. For example, when the VNC
server is later converted it would use
$QEMU -object tls-creds-x509,id=tls0,.... \
-vnc 127.0.0.1:1,tls-creds=tls0
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Daniel P. Berrange [Fri, 13 Mar 2015 17:39:26 +0000 (17:39 +0000)]
crypto: introduce new module for TLS anonymous credentials
Introduce a QCryptoTLSCredsAnon class which is used to
manage anonymous TLS credentials. Use of this class is
generally discouraged since it does not offer strong
security, but it is required for backwards compatibility
with the current VNC server implementation.
Simple example CLI configuration:
$QEMU -object tls-creds-anon,id=tls0,endpoint=server
Example using pre-created diffie-hellman parameters
$QEMU -object tls-creds-anon,id=tls0,endpoint=server,\
dir=/path/to/creds/dir
The 'id' value in the -object args will be used to associate the
credentials with the network services. For example, when the VNC
server is later converted it would use
$QEMU -object tls-creds-anon,id=tls0,.... \
-vnc 127.0.0.1:1,tls-creds=tls0
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Daniel P. Berrange [Fri, 13 Mar 2015 17:39:26 +0000 (17:39 +0000)]
crypto: introduce new base module for TLS credentials
Introduce a QCryptoTLSCreds class to act as the base class for
storing TLS credentials. This will be later subclassed to provide
handling of anonymous and x509 credential types. The subclasses
will be user creatable objects, so instances can be created &
deleted via 'object-add' and 'object-del' QMP commands respectively,
or via the -object command line arg.
If the credentials cannot be initialized an error will be reported
as a QMP reply, or on stderr respectively.
The idea is to make it possible to represent and manage TLS
credentials independently of the network service that is using
them. This will enable multiple services to use the same set of
credentials and minimize code duplication. A later patch will
convert the current VNC server TLS code over to use this object.
The representation of credentials will be functionally equivalent
to that currently implemented in the VNC server with one exception.
The new code has the ability to (optionally) load a pre-generated
set of diffie-hellman parameters, if the file dh-params.pem exists,
whereas the current VNC server will always generate them on startup.
This is beneficial for admins who wish to avoid the (small) time
sink of generating DH parameters at startup and/or avoid depleting
entropy.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Daniel P. Berrange [Wed, 2 Sep 2015 10:18:16 +0000 (11:18 +0100)]
qom: allow QOM to be linked into tools binaries
The qom objects are currently added to common-obj-y
which is only linked into the system emulators. The
later crypto patches will depend on QOM infrastructure
and will also be used from tools binaries. Thus the QOM
objects are moved into a new qom-obj-y variable which
can be referenced when linking tools, system emulators
and tests.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Daniel P. Berrange [Wed, 2 Sep 2015 09:57:27 +0000 (10:57 +0100)]
crypto: move crypto objects out of libqemuutil.la
Future patches will be adding more crypto related APIs which
rely on QOM infrastructure. This creates a problem, because
QOM relies on library constructors to register objects. When
you have a file in a static .a library though which is only
referenced by a constructor the linker is dumb and will drop
that file when linking to the final executable :-( The only
workaround for this is to link the .a library to the executable
using the -Wl,--whole-archive flag, but this creates its own
set of problems because QEMU is relying on lazy linking for
libqemuutil.a. Using --whole-archive majorly increases the
size of final executables as they now contain a bunch of
object code they don't actually use.
The least bad option is to thus not include the crypto objects
in libqemuutil.la, and instead define a crypto-obj-y variable
that is referenced directly by all the executables that need
this code (tools + softmmu, but not qemu-ga). We avoid pulling
entire of crypto-obj-y into the userspace emulators as that
would force them to link to gnutls too, which is not required.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Daniel P. Berrange [Wed, 2 Sep 2015 10:35:52 +0000 (11:35 +0100)]
tests: remove repetition in unit test object deps
Most of the unit tests have identical sets of object deps.
For example all block unit tests need to depend on
$(block-obj-y) libqemuutil.a libqemustub.a
Currently each unit test repeats this list of test deps.
This list of deps will grow as future patches add more
modules to the build, so define some common variables
that can be used by all unit tests to remove the
repetition.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Daniel P. Berrange [Wed, 26 Aug 2015 13:21:20 +0000 (14:21 +0100)]
qapi: allow override of default enum prefix naming
The camel_to_upper() method applies some heuristics to turn
a mixed case type name into an all-uppercase name. This is
used for example, to generate enum constant name prefixes.
The heuristics don't also generate a satisfactory name
though. eg
{ 'enum': 'QCryptoTLSCredsEndpoint',
'data': ['client', 'server']}
Results in Q_CRYPTOTLS_CREDS_ENDPOINT_CLIENT. This has
an undesirable _ after the initial Q and is missing an
_ between the CRYPTO & TLS strings.
Rather than try to add more and more heuristics to try
to cope with this, simply allow the QAPI schema to
specify the desired enum constant prefix explicitly.
eg
{ 'enum': 'QCryptoTLSCredsEndpoint',
'prefix': 'QCRYPTO_TLS_CREDS_ENDPOINT',
'data': ['client', 'server']}
Now gives the QCRYPTO_TLS_CREDS_ENDPOINT_CLIENT name.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Peter Maydell [Mon, 14 Sep 2015 17:51:09 +0000 (18:51 +0100)]
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches (v2)
# gpg: Signature made Mon 14 Sep 2015 15:56:54 BST using RSA key ID
C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (23 commits)
qcow2: Make qcow2_alloc_bytes() more explicit
vmdk: Fix next_cluster_sector for compressed write
iotests: Add test for checking large image files
qcow2: Make size_to_clusters() return uint64_t
qemu-iotests: More qcow2 reopen tests
qemu-iotests: Reopen qcow2 with lazy-refcounts change
qcow2: Support updating driver-specific options in reopen
qcow2: Make qcow2_update_options() suitable for transactions
qcow2: Fix memory leak in qcow2_update_options() error path
qcow2: Leave s unchanged on qcow2_update_options() failure
qcow2: Move rest of option handling to qcow2_update_options()
qcow2: Move qcow2_update_options() call up
qcow2: Factor out qcow2_update_options()
qcow2: Improve error message
qemu-io: Add command 'reopen'
qemu-io: Remove duplicate 'open' error message
block: Allow specifying driver-specific options to reopen
qcow2: Rename BDRVQcowState to BDRVQcow2State
block: Drop bdrv_find_whitelisted_format()
block: Drop drv parameter from bdrv_fill_options()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Markus Armbruster [Mon, 7 Sep 2015 15:45:55 +0000 (17:45 +0200)]
qapi: Fix cgen() for Python older than 2.7
A feature new in Python 2.7 crept into commit
77e703b: re.subn()'s
fifth argument. Avoid that, use re.compile().
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id:
1441640755-23902-1-git-send-email-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 14 Sep 2015 15:13:16 +0000 (16:13 +0100)]
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Support for jemalloc
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.
And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs
# gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID
78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (44 commits)
cutils: work around platform differences in strto{l,ul,ll,ull}
cpu-exec: fix lock hierarchy for user-mode emulation
exec: make mmap_lock/mmap_unlock globally available
tcg: comment on which functions have to be called with mmap_lock held
tcg: add memory barriers in page_find_alloc accesses
remove unused spinlock.
replace spinlock by QemuMutex.
cpus: remove tcg_halt_cond and tcg_cpu_thread globals
cpus: protect work list with work_mutex
scripts/dump-guest-memory.py: fix after RAMBlock change
configure: Add support for jemalloc
add macro file for coccinelle
configure: factor out adding disas configure
vhost-scsi: fix wrong vhost-scsi firmware path
checkpatch: remove tests that are not relevant outside the kernel
checkpatch: adapt some tests to QEMU
CODING_STYLE: update mixed declaration rules
qmp: Add example usage of strto*l() qemu wrapper
cutils: Add qemu_strtoull() wrapper
cutils: Add qemu_strtoll() wrapper
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Max Reitz [Fri, 11 Sep 2015 16:47:51 +0000 (18:47 +0200)]
qcow2: Make qcow2_alloc_bytes() more explicit
In case of -EAGAIN returned by update_refcount(), we should discard the
cluster offset we were trying to allocate and request a new one, because
in theory that old offset might now be taken by a refcount block.
In practice, this was not the case due to update_refcount() generally
returning strictly monotonic increasing cluster offsets. However, this
behavior is not set in stone, and it is also not obvious when looking at
qcow2_alloc_bytes() alone, so we should not rely on it.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Radoslav Gerganov [Thu, 10 Sep 2015 07:53:14 +0000 (10:53 +0300)]
vmdk: Fix next_cluster_sector for compressed write
When the VMDK is streamOptimized (or compressed), the
next_cluster_sector must not be incremented by a fixed number of
sectors. Instead of this, it must be rounded up to the next consecutive
sector. Fixing this results in much smaller compressed images.
Signed-off-by: Radoslav Gerganov <rgerganov@vmware.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Wed, 9 Sep 2015 16:09:47 +0000 (18:09 +0200)]
iotests: Add test for checking large image files
Add a test for checking a qcow2 file with a multiple of 2^32 clusters.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Mon, 14 Sep 2015 14:39:47 +0000 (16:39 +0200)]
qcow2: Make size_to_clusters() return uint64_t
Sadly, some images may have more clusters than what can be represented
using a plain int. We should be prepared for that case (in
qcow2_check_refcounts() we actually were trying to catch that case, but
since size_to_clusters() truncated the returned value, that check never
did anything useful).
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 4 Sep 2015 17:13:14 +0000 (19:13 +0200)]
qemu-iotests: More qcow2 reopen tests
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Fri, 4 Sep 2015 16:26:09 +0000 (18:26 +0200)]
qemu-iotests: Reopen qcow2 with lazy-refcounts change
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Thu, 16 Apr 2015 11:42:27 +0000 (13:42 +0200)]
qcow2: Support updating driver-specific options in reopen
For updating the cache sizes, disabling lazy refcounts and updating the
clean_cache_timer there is a bit more to do than just changing the
variables, but otherwise we're all set for changing options during
bdrv_reopen().
Just implement the missing pieces and hook the functions up in
bdrv_reopen().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Thu, 16 Apr 2015 14:16:02 +0000 (16:16 +0200)]
qcow2: Make qcow2_update_options() suitable for transactions
Before we can allow updating options at runtime with bdrv_reopen(), we
need to split the function into prepare/commit/abort parts.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Fri, 17 Apr 2015 14:35:50 +0000 (16:35 +0200)]
qcow2: Fix memory leak in qcow2_update_options() error path
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Thu, 16 Apr 2015 11:11:39 +0000 (13:11 +0200)]
qcow2: Leave s unchanged on qcow2_update_options() failure
On return, either all new options should be applied to BDRVQcowState (on
success), or all of the old settings should be preserved (on failure).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Thu, 16 Apr 2015 09:44:26 +0000 (11:44 +0200)]
qcow2: Move rest of option handling to qcow2_update_options()
With this commit, the handling of driver-specific options in
qcow2_open() is completely separated out into qcow2_update_options().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Thu, 16 Apr 2015 09:36:10 +0000 (11:36 +0200)]
qcow2: Move qcow2_update_options() call up
qcow2_update_options() only updates some variables in BDRVQcowState and
doesn't really depend on other parts of it being initialised yet, so it
can be moved so that it immediately follows the other half of option
handling code in qcow2_open().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Thu, 16 Apr 2015 09:29:27 +0000 (11:29 +0200)]
qcow2: Factor out qcow2_update_options()
Eventually we want to be able to change options at runtime. As a first
step towards that goal, separate some option handling code from the
general initialisation code in qcow2_open().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Wed, 13 May 2015 09:07:07 +0000 (11:07 +0200)]
qcow2: Improve error message
Eric says that "any" sounds better than "either", and my non-native
feeling says the same, so let's change it.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Mon, 8 Dec 2014 16:37:28 +0000 (17:37 +0100)]
qemu-io: Add command 'reopen'
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Wed, 13 May 2015 08:39:13 +0000 (10:39 +0200)]
qemu-io: Remove duplicate 'open' error message
qemu_opts_parse_noisily() already prints an error message with the exact
reason why the parsing failed. No need to add another less specific one.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Fri, 10 Apr 2015 15:50:50 +0000 (17:50 +0200)]
block: Allow specifying driver-specific options to reopen
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Mon, 7 Sep 2015 15:12:56 +0000 (17:12 +0200)]
qcow2: Rename BDRVQcowState to BDRVQcow2State
BDRVQcowState is already used by qcow1, and gdb is always confused which
one to use. Rename the qcow2 one so they can be distinguished.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Max Reitz [Wed, 26 Aug 2015 17:47:52 +0000 (19:47 +0200)]
block: Drop bdrv_find_whitelisted_format()
It is unused by now, so we can drop it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Wed, 26 Aug 2015 17:47:51 +0000 (19:47 +0200)]
block: Drop drv parameter from bdrv_fill_options()
Now that this parameter is effectively unused, we can drop it and change
the function accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Wed, 26 Aug 2015 17:47:50 +0000 (19:47 +0200)]
block: Drop drv parameter from bdrv_open_inherit()
Now that this parameter is effectively unused, we can drop it and just
pass NULL to bdrv_fill_options().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Wed, 26 Aug 2015 17:47:49 +0000 (19:47 +0200)]
block: Drop drv parameter from bdrv_open()
Now that this parameter is effectively unused, we can drop it and just
pass NULL on to bdrv_open_inherit().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Wed, 26 Aug 2015 17:47:48 +0000 (19:47 +0200)]
block: Always pass NULL as drv for bdrv_open()
Change all callers of bdrv_open() to pass the driver name in the options
QDict instead of passing its BlockDriver pointer.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Peter Maydell [Mon, 14 Sep 2015 13:57:50 +0000 (14:57 +0100)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-
20150914' into staging
target-arm queue:
* fix GIC region size in xlnx-zynqmp
* xlnx-zynqmp: Remove unnecessary brackets
* improve A64 generated TCG code
* add GPIO devices to i.MX25 and i.MX31
* more missing pieces for EL2 support
# gpg: Signature made Mon 14 Sep 2015 14:51:12 BST using RSA key ID
14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
* remotes/pmaydell/tags/pull-target-arm-
20150914: (24 commits)
target-arm: Add VMPIDR_EL2
target-arm: Break out mpidr_read_val()
target-arm: Add VPIDR_EL2
target-arm: Suppress EPD for S2, EL2 and EL3 translations
target-arm: Suppress TBI for S2 translations
target-arm: Add VTTBR_EL2
target-arm: Add VTCR_EL2
hw/cpu/{a15mpcore, a9mpcore}: Handle missing has_el3 CPU props gracefully
i.MX: Add GPIO devices to i.MX25 SOC
i.MX: Add GPIO devices to i.MX31 SOC
i.MX: Add GPIO device
target-arm: Use tcg_gen_extrh_i64_i32
target-arm: Recognize ROR
target-arm: Eliminate unnecessary zero-extend in disas_bitfield
target-arm: Recognize UXTB, UXTH, LSR, LSL
target-arm: Recognize SXTB, SXTH, SXTW, ASR
target-arm: Implement fcsel with movcond
target-arm: Implement ccmp branchless
target-arm: Use setcond and movcond for csel
target-arm: Handle always condition codes within arm_test_cc
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Mon, 14 Sep 2015 13:39:51 +0000 (14:39 +0100)]
target-arm: Add VMPIDR_EL2
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1442135278-25281-9-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Mon, 14 Sep 2015 13:39:51 +0000 (14:39 +0100)]
target-arm: Break out mpidr_read_val()
Break out mpidr_read_val() to allow future sharing of the
code that conditionally sets the M and U bits of MPIDR.
No functional changes.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1442135278-25281-8-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Mon, 14 Sep 2015 13:39:50 +0000 (14:39 +0100)]
target-arm: Add VPIDR_EL2
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1442135278-25281-7-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Mon, 14 Sep 2015 13:39:50 +0000 (14:39 +0100)]
target-arm: Suppress EPD for S2, EL2 and EL3 translations
Stage-2 translations, EL2 and EL3 regimes don't have the
EPD control.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1442135278-25281-6-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Mon, 14 Sep 2015 13:39:50 +0000 (14:39 +0100)]
target-arm: Suppress TBI for S2 translations
Stage-2 MMU translations do not have configurable TBI as
the top byte is always 0 (48-bit IPAs).
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1442135278-25281-5-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Mon, 14 Sep 2015 13:39:50 +0000 (14:39 +0100)]
target-arm: Add VTTBR_EL2
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1442135278-25281-4-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Mon, 14 Sep 2015 13:39:50 +0000 (14:39 +0100)]
target-arm: Add VTCR_EL2
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1442135278-25281-3-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fixed typo in comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Mon, 14 Sep 2015 13:39:49 +0000 (14:39 +0100)]
hw/cpu/{a15mpcore, a9mpcore}: Handle missing has_el3 CPU props gracefully
Handle missing CPU support for EL3 gracefully.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1442135278-25281-2-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Jean-Christophe Dubois [Mon, 14 Sep 2015 13:39:49 +0000 (14:39 +0100)]
i.MX: Add GPIO devices to i.MX25 SOC
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id:
2eb129ba8713aedfe877eaa3d8de80061d880fbb.
1441828793.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Jean-Christophe Dubois [Mon, 14 Sep 2015 13:39:49 +0000 (14:39 +0100)]
i.MX: Add GPIO devices to i.MX31 SOC
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id:
60b67c9a8b948159f4b4163ead86fbf701c011c6.
1441828793.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Jean-Christophe Dubois [Mon, 14 Sep 2015 13:39:49 +0000 (14:39 +0100)]
i.MX: Add GPIO device
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id:
5ea3b0021e47cf7f7d883a7edbabee44980f3df7.
1441828793.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Mon, 14 Sep 2015 13:39:49 +0000 (14:39 +0100)]
target-arm: Use tcg_gen_extrh_i64_i32
Usually, eliminate an operation from the translator by combining
a shift with an extract.
In the case of gen_set_NZ64, we don't need a boolean value for cpu_ZF,
merely a non-zero value. Given that we can extract both halves of a
64-bit input in one call, this simplifies the code.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id:
1441909103-24666-12-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Mon, 14 Sep 2015 13:39:49 +0000 (14:39 +0100)]
target-arm: Recognize ROR
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id:
1441909103-24666-11-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Mon, 14 Sep 2015 13:39:48 +0000 (14:39 +0100)]
target-arm: Eliminate unnecessary zero-extend in disas_bitfield
For !SF, this initial ext32u can't be optimized away by the
current TCG code generator. (It would require backward bit
liveness propagation.)
But since the range of bits for !SF are already constrained by
unallocated_encoding, we'll never reference the high bits anyway.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id:
1441909103-24666-10-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Mon, 14 Sep 2015 13:39:48 +0000 (14:39 +0100)]
target-arm: Recognize UXTB, UXTH, LSR, LSL
These are all special case aliases of UBFM.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id:
1441909103-24666-9-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Mon, 14 Sep 2015 13:39:48 +0000 (14:39 +0100)]
target-arm: Recognize SXTB, SXTH, SXTW, ASR
These are all special case aliases of SBFM.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id:
1441909103-24666-8-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Mon, 14 Sep 2015 13:39:48 +0000 (14:39 +0100)]
target-arm: Implement fcsel with movcond
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id:
1441909103-24666-7-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Mon, 14 Sep 2015 13:39:48 +0000 (14:39 +0100)]
target-arm: Implement ccmp branchless
This can allow much of a ccmp to be elided when particular
flags are subsequently dead.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id:
1441909103-24666-6-git-send-email-rth@twiddle.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Mon, 14 Sep 2015 13:39:47 +0000 (14:39 +0100)]
target-arm: Use setcond and movcond for csel
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id:
1441909103-24666-5-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Mon, 14 Sep 2015 13:39:47 +0000 (14:39 +0100)]
target-arm: Handle always condition codes within arm_test_cc
Handling this with TCG_COND_ALWAYS will allow these unlikely
cases to be handled without special cases in the rest of the
translator. The TCG optimizer ought to be able to reduce
these ALWAYS conditions completely.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id:
1441909103-24666-4-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Mon, 14 Sep 2015 13:39:47 +0000 (14:39 +0100)]
target-arm: Introduce DisasCompare
Split arm_gen_test_cc into 3 functions, so that it can be reused
for non-branch TCG comparisons.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id:
1441909103-24666-3-git-send-email-rth@twiddle.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Mon, 14 Sep 2015 13:39:47 +0000 (14:39 +0100)]
target-arm: Share all common TCG temporaries
This is a bug fix for aarch64. At present, we have branches using
the 32-bit (translate.c) versions of cpu_[NZCV]F, but we set the flags
using the 64-bit (translate-a64.c) versions of cpu_[NZCV]F. From
the view of the TCG code generator, these are unrelated variables.
The bug is hard to see because we currently only read these variables
from branches, and upon reaching a branch TCG will first spill live
variables and then reload the arguments of the branch. Since the
32-bit versions were never live until reaching the branch, we'd re-read
the data that had just been spilled from the 64-bit versions.
There is currently no such problem with the cpu_exclusive_* variables,
but there's no point in tempting fate.
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id:
1441909103-24666-2-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alistair Francis [Mon, 14 Sep 2015 13:39:47 +0000 (14:39 +0100)]
xlnx-zynqmp: Remove unnecessary brackets around error messages
The errp and err variable have unnecessary brackets around them,
so remove the brackets.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id:
9900393572b63f2ec3d68785ca98193d81e0ac71.
1441758563.git.alistair.francis@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Nathan Rossi [Mon, 14 Sep 2015 13:39:47 +0000 (14:39 +0100)]
arm: xlnx-zynqmp: Fix up GIC region size
The GIC in ZynqMP cover a 64K address space, however the actual
registers are decoded within a 4K address space and mirrored at the 4K
boundaries. This change fixes the defined size for these regions as it
was set to 0x4000/16K incorrectly.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1441719672-25296-1-git-send-email-nathan@nathanrossi.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 14 Sep 2015 09:46:38 +0000 (10:46 +0100)]
Merge remote-tracking branch 'remotes/aurel/tags/pull-sh4-next-
20150913' into staging
sh4-next:
- TCG optimizations
- fix initramfs endianness issue
# gpg: Signature made Sun 13 Sep 2015 22:16:12 BST using RSA key ID
1DDD8C9B
# gpg: Good signature from "Aurelien Jarno <aurelien@aurel32.net>"
# gpg: aka "Aurelien Jarno <aurelien@jarno.fr>"
# gpg: aka "Aurelien Jarno <aurel32@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7746 2642 A9EF 94FD 0F77 196D BA9C 7806 1DDD 8C9B
* remotes/aurel/tags/pull-sh4-next-
20150913:
sh4: Fix initramfs initialization for endiannes-mismatched targets
target-sh4: improve shad instruction
target-sh4: improve shld instruction
target-sh4: improve cmp/str instruction
target-sh4: use deposit in swap.b instruction
target-sh4: add flags markups for FP helpers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Guenter Roeck [Wed, 12 Aug 2015 14:20:36 +0000 (07:20 -0700)]
sh4: Fix initramfs initialization for endiannes-mismatched targets
If host and target endianness does not match, loding an initramfs does not work.
Fix by writing boot parameters with appropriate endianness conversion.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Sun, 5 Jul 2015 20:39:03 +0000 (22:39 +0200)]
target-sh4: improve shad instruction
The SH4 shad instruction can shift in both direction, depending on the
sign of the shift. This is currently implemented using branches, which
is not really efficient and prevents the optimizer to do its job. In
practice it is often used with a constant loaded in a register just
before.
Simplify the implementation by computing both the value shifted to the
left and to the right, and then selecting the correct one with a
movcond. As with a negative value the shift amount can go up to 32 which
is undefined, we shift the value in two steps.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Sun, 5 Jul 2015 20:37:18 +0000 (22:37 +0200)]
target-sh4: improve shld instruction
The SH4 shld instruction can shift in both direction, depending on the
sign of the shift. This is currently implemented using branches, which
is not really efficient and prevents the optimizer to do its job. In
practice it is often used with a constant loaded in a register just
before.
Simplify the implementation by computing both the value shifted to the
left and to the right, and then selecting the correct one with a
movcond. As with a negative value the shift amount can go up to 32 which
is undefined, we shift the value in two steps.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Sun, 5 Jul 2015 16:50:09 +0000 (18:50 +0200)]
target-sh4: improve cmp/str instruction
Instead of testing bytes one by one, we can use the following trick
from https://graphics.stanford.edu/~seander/bithacks.html:
haszero(v) = (v - 0x01010101) & ~v & 0x80808080
The subexpression v - 0x01010101, evaluates to a high bit set in any
byte whenever the corresponding byte in v is zero or greater than 0x80.
The sub-expression ~v & 0x80808080 evaluates to high bits set in bytes
where the byte of v doesn't have its high bit set (so the byte was less
than 0x80). Finally, by ANDing these two sub-expressions the result is
the high bits set where the bytes in v were zero, since the high bits
set due to a value greater than 0x80 in the first sub-expression are
masked off by the second.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Sun, 5 Jul 2015 15:05:08 +0000 (17:05 +0200)]
target-sh4: use deposit in swap.b instruction
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Wed, 17 Jun 2015 10:53:13 +0000 (12:53 +0200)]
target-sh4: add flags markups for FP helpers
Most floating point helpers can trigger an exception, but don't change
the globals. Mark these helpers as TCG_CALL_NO_WG.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Peter Maydell [Fri, 11 Sep 2015 17:01:56 +0000 (18:01 +0100)]
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-
20150911' into staging
queued tcg related patches
# gpg: Signature made Fri 11 Sep 2015 16:17:00 BST using RSA key ID
4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg: aka "Richard Henderson <rth@redhat.com>"
# gpg: aka "Richard Henderson <rth@twiddle.net>"
* remotes/rth/tags/pull-tcg-
20150911:
cpu-exec: introduce loop exit with restore function
softmmu: remove now unused functions
softmmu: add helper function to pass through retaddr
tlb: Add "ifetch" argument to cpu_mmu_index()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 14 Aug 2015 17:46:32 +0000 (18:46 +0100)]
scripts/qemu-gdb: Add brief comment describing usage
Add a brief comment describing how to use the debug support
from GDB.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
1439574392-4403-5-git-send-email-peter.maydell@linaro.org
Peter Maydell [Fri, 14 Aug 2015 17:46:31 +0000 (18:46 +0100)]
scripts/qemu-gdb: Silently pass through SIGUSR1
SIGUSR1 is QEMU's IPI signal, and it gets sent a lot, so is
best silently passed through to the guest without stopping.
Make qemu-gdb.py do this bit of configuration for the user.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
1439574392-4403-4-git-send-email-peter.maydell@linaro.org
Peter Maydell [Fri, 14 Aug 2015 17:46:30 +0000 (18:46 +0100)]
scripts/qemu-gdb: Split CoroutineCommand into its own file
Split the implementation of CoroutineCommand into its own file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
1439574392-4403-3-git-send-email-peter.maydell@linaro.org
Peter Maydell [Fri, 14 Aug 2015 17:46:29 +0000 (18:46 +0100)]
scripts/qemu-gdb: Split MtreeCommand into its own module
As we add more commands to our Python gdb debugging support, it's
going to get unwieldy to have everything in a single file. Split
the implementation of the 'mtree' command from qemu-gdb.py into
its own module.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
1439574392-4403-2-git-send-email-peter.maydell@linaro.org
Pavel Dovgalyuk [Fri, 10 Jul 2015 09:57:02 +0000 (12:57 +0300)]
cpu-exec: introduce loop exit with restore function
This patch introduces loop exit function, which also
restores guest CPU state according to the value of host
program counter.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <
20150710095702.13280.97477.stgit@PASHA-ISP>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Pavel Dovgalyuk [Fri, 10 Jul 2015 09:56:56 +0000 (12:56 +0300)]
softmmu: remove now unused functions
Now that the cpu_ld/st_* function directly call helper_ret_ld/st, we can
drop the old helper_ld/st functions.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <
20150710095656.13280.7085.stgit@PASHA-ISP>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Pavel Dovgalyuk [Fri, 10 Jul 2015 09:56:50 +0000 (12:56 +0300)]
softmmu: add helper function to pass through retaddr
This patch introduces several helpers to pass return address
which points to the TB. Correct return address allows correct
restoring of the guest PC and icount. These functions should be used when
helpers embedded into TB invoke memory operations.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <
20150710095650.13280.32255.stgit@PASHA-ISP>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Benjamin Herrenschmidt [Mon, 17 Aug 2015 07:34:10 +0000 (17:34 +1000)]
tlb: Add "ifetch" argument to cpu_mmu_index()
This is set to true when the index is for an instruction fetch
translation.
The core get_page_addr_code() sets it, as do the SOFTMMU_CODE_ACCESS
acessors.
All targets ignore it for now, and all other callers pass "false".
This will allow targets who wish to split the mmu index between
instruction and data accesses to do so. A subsequent patch will
do just that for PowerPC.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Message-Id: <
1439796853-4410-2-git-send-email-benh@kernel.crashing.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Peter Maydell [Fri, 11 Sep 2015 11:07:29 +0000 (12:07 +0100)]
Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2015-09-11' into staging
trivial patches for 2015-09-11
# gpg: Signature made Fri 11 Sep 2015 12:02:43 BST using RSA key ID
A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
* remotes/mjt/tags/pull-trivial-patches-2015-09-11: (26 commits)
virtio-vga: enable for i386
hw/arm/spitz: Remove meaningless blank Property
hw/gpio/zaurus: Remove meaningless blank Property
hw/virtio/virtio-pci: Remove meaningless blank Property
hw/s390x/s390-virtio-bus: Remove meaningless blank Property
typofixes - v4
qapi-schema: remove legacy<> from doc
disas/microblaze: Remove unused code
help: dd missing newline
Target-ppc: Remove unnecessary variable
baum: Fix build with debugging enabled
linux-user: Fix warnings caused by missing 'static' attribute
opts: produce valid command line in qemu_opts_print
docs: fix a qga/qapi-schema.json comment
trivial: remove trailing newline from error_report
maint: avoid useless "if (foo) free(foo)" pattern
maint: avoid useless "if (foo) free(foo)" pattern
maint: remove unused include for strings.h
maint: remove unused include for signal.h
maint: remove unused include for dirent.h
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Gerd Hoffmann [Mon, 13 Jul 2015 11:58:46 +0000 (13:58 +0200)]
virtio-vga: enable for i386
This one just syncs x86_64 and i386.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-trivial@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Shannon Zhao [Tue, 12 May 2015 02:25:20 +0000 (10:25 +0800)]
hw/arm/spitz: Remove meaningless blank Property
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Shannon Zhao [Tue, 12 May 2015 02:25:19 +0000 (10:25 +0800)]
hw/gpio/zaurus: Remove meaningless blank Property
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Shannon Zhao [Tue, 12 May 2015 02:25:18 +0000 (10:25 +0800)]
hw/virtio/virtio-pci: Remove meaningless blank Property
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Shannon Zhao [Tue, 12 May 2015 02:25:16 +0000 (10:25 +0800)]
hw/s390x/s390-virtio-bus: Remove meaningless blank Property
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Veres Lajos [Tue, 8 Sep 2015 21:45:14 +0000 (22:45 +0100)]
typofixes - v4
Signed-off-by: Veres Lajos <vlajos@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Marc-André Lureau [Fri, 4 Sep 2015 19:41:01 +0000 (21:41 +0200)]
qapi-schema: remove legacy<> from doc
The legacy<> type is no longer used since
7ce7ffe02.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Stefan Weil [Sat, 29 Aug 2015 07:44:33 +0000 (09:44 +0200)]
disas/microblaze: Remove unused code
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Laurent Vivier [Fri, 4 Sep 2015 19:30:04 +0000 (21:30 +0200)]
help: dd missing newline
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Shraddha Barke [Fri, 4 Sep 2015 19:20:28 +0000 (00:50 +0530)]
Target-ppc: Remove unnecessary variable
Compress lines and remove the variable ret.
Change made using Coccinelle script
@@
expression ret;
@@
- if (ret) return ret;
- return 0;
+ return ret;
@@
local idexpression ret;
expression e;
@@
- ret = e;
- return ret;
+ return e;
@@
type T; identifier i;
@@
- T i;
... when != i
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Samuel Thibault [Sun, 30 Aug 2015 15:12:13 +0000 (17:12 +0200)]
baum: Fix build with debugging enabled
cur and buf are pointers, so the difference is a ptrdiff_t
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Stefan Weil [Sat, 29 Aug 2015 07:29:52 +0000 (09:29 +0200)]
linux-user: Fix warnings caused by missing 'static' attribute
Warnings from the Sparse static analysis tool:
linux-user/main.c:40:12: warning:
symbol 'filename' was not declared. Should it be static?
linux-user/main.c:41:12: warning:
symbol 'argv0' was not declared. Should it be static?
linux-user/main.c:42:5: warning:
symbol 'gdbstub_port' was not declared. Should it be static?
linux-user/main.c:43:11: warning:
symbol 'envlist' was not declared. Should it be static?
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Kővágó, Zoltán [Tue, 7 Jul 2015 14:42:10 +0000 (16:42 +0200)]
opts: produce valid command line in qemu_opts_print
This will let us print options in a format that the user would actually
write it on the command line (foo=bar,baz=asd,etc=def), without
prepending a spurious comma at the beginning of the list, or quoting
values unnecessarily. This patch provides the following changes:
* write and id=, if the option has an id
* do not print separator before the first element
* do not quote string arguments
* properly escape commas (,) for QEMU
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Marc-André Lureau [Thu, 27 Aug 2015 10:48:35 +0000 (12:48 +0200)]
docs: fix a qga/qapi-schema.json comment
For consistency with the rest of the comment blocks.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
John Snow [Mon, 29 Jun 2015 20:56:26 +0000 (16:56 -0400)]
trivial: remove trailing newline from error_report
Minor cleanup.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Markus Armbruster [Wed, 26 Aug 2015 12:02:53 +0000 (14:02 +0200)]
maint: avoid useless "if (foo) free(foo)" pattern
My Coccinelle semantic patch finds a few more, because it also fixes up
the equally pointless conditional
if (foo) {
free(foo);
foo = NULL;
}
Result (feel free to squash it into your patch):
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Daniel P. Berrange [Wed, 26 Aug 2015 11:17:18 +0000 (12:17 +0100)]
maint: avoid useless "if (foo) free(foo)" pattern
The free() and g_free() functions both happily accept
NULL on any platform QEMU builds on. As such putting a
conditional 'if (foo)' check before calls to 'free(foo)'
merely serves to bloat the lines of code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Daniel P. Berrange [Wed, 26 Aug 2015 11:17:17 +0000 (12:17 +0100)]
maint: remove unused include for strings.h
A number of files were including strings.h but not using any
of the functions it provides
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Daniel P. Berrange [Wed, 26 Aug 2015 11:17:16 +0000 (12:17 +0100)]
maint: remove unused include for signal.h
A number of files were including signal.h but not using any
of the functions it provides
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Daniel P. Berrange [Wed, 26 Aug 2015 11:17:15 +0000 (12:17 +0100)]
maint: remove unused include for dirent.h
A number of files were including dirent.h but not using any
of the functions it provides
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Daniel P. Berrange [Wed, 26 Aug 2015 11:17:14 +0000 (12:17 +0100)]
maint: remove unused include for assert.h
A number of files were including assert.h but not using any
of the functions it provides
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Daniel P. Berrange [Wed, 26 Aug 2015 11:17:13 +0000 (12:17 +0100)]
maint: remove / fix many doubled words
Many source files have doubled words (eg "the the", "to to",
and so on). Most of these can simply be removed, but a couple
were actual mis-spellings (eg "to to" instead of "to do").
There was even one triple word score "to to to" :-)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>