OSDN Git Service
Gu Zheng [Wed, 24 Jun 2015 23:57:02 +0000 (16:57 -0700)]
mm/memory hotplug: init the zone's size when calculating node totalpages
Init the zone's size when calculating node totalpages to avoid duplicated
operations in free_area_init_core().
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Naoya Horiguchi [Wed, 24 Jun 2015 23:56:59 +0000 (16:56 -0700)]
mm/hugetlb: introduce minimum hugepage order
Currently the initial value of order in dissolve_free_huge_page is 64 or
32, which leads to the following warning in static checker:
mm/hugetlb.c:1203 dissolve_free_huge_pages()
warn: potential right shift more than type allows '9,18,64'
This is a potential risk of infinite loop, because 1 << order (== 0) is used
in for-loop like this:
for (pfn =3D start_pfn; pfn < end_pfn; pfn +=3D 1 << order)
...
So this patch fixes it by using global minimum_order calculated at boot time.
text data bss dec hex filename
28313 469 84236 113018 1b97a mm/hugetlb.o
28256 473 84236 112965 1b945 mm/hugetlb.o (patched)
Fixes:
c8721bbbdd36 ("mm: memory-hotplug: enable memory hotplug to handle hugepage")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vladimir Davydov [Wed, 24 Jun 2015 23:56:56 +0000 (16:56 -0700)]
rmap: fix theoretical race between do_wp_page and shrink_active_list
As noted by Paul the compiler is free to store a temporary result in a
variable on stack, heap or global unless it is explicitly marked as
volatile, see:
http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2015/n4455.html#sample-optimizations
This can result in a race between do_wp_page() and shrink_active_list()
as follows.
In do_wp_page() we can call page_move_anon_rmap(), which sets
page->mapping as follows:
anon_vma = (void *) anon_vma + PAGE_MAPPING_ANON;
page->mapping = (struct address_space *) anon_vma;
The page in question may be on an LRU list, because nowhere in
do_wp_page() we remove it from the list, neither do we take any LRU
related locks. Although the page is locked, shrink_active_list() can
still call page_referenced() on it concurrently, because the latter does
not require an anonymous page to be locked:
CPU0 CPU1
---- ----
do_wp_page shrink_active_list
lock_page page_referenced
PageAnon->yes, so skip trylock_page
page_move_anon_rmap
page->mapping = anon_vma
rmap_walk
PageAnon->no
rmap_walk_file
BUG
page->mapping += PAGE_MAPPING_ANON
This patch fixes this race by explicitly forbidding the compiler to split
page->mapping store in page_move_anon_rmap() with the aid of WRITE_ONCE.
[akpm@linux-foundation.org: tweak comment, per Minchan]
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Naoya Horiguchi [Wed, 24 Jun 2015 23:56:53 +0000 (16:56 -0700)]
mm/memory-failure: me_huge_page() does nothing for thp
memory_failure() is supposed not to handle thp itself, but to split it.
But if something were wrong and page_action() were called on thp,
me_huge_page() (action routine for hugepages) should be better to take
no action, rather than to take wrong action prepared for hugetlb (which
triggers BUG_ON().)
This change is for potential problems, but makes sense to me because thp
is an actively developing feature and this code path can be open in the
future.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Naoya Horiguchi [Wed, 24 Jun 2015 23:56:50 +0000 (16:56 -0700)]
mm: soft-offline: don't free target page in successful page migration
Stress testing showed that soft offline events for a process iterating
"mmap-pagefault-munmap" loop can trigger
VM_BUG_ON(PAGE_FLAGS_CHECK_AT_PREP) in __free_one_page():
Soft offlining page 0x70fe1 at 0x70100008d000
Soft offlining page 0x705fb at 0x70300008d000
page:
ffffea0001c3f840 count:0 mapcount:0 mapping: (null) index:0x2
flags: 0x1fffff80800000(hwpoison)
page dumped because: VM_BUG_ON_PAGE(page->flags & ((1 << 25) - 1))
------------[ cut here ]------------
kernel BUG at /src/linux-dev/mm/page_alloc.c:585!
invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC
Modules linked in: cfg80211 rfkill crc32c_intel microcode ppdev parport_pc pcspkr serio_raw virtio_balloon parport i2c_piix4 virtio_blk virtio_net ata_generic pata_acpi floppy
CPU: 3 PID: 1779 Comm: test_base_madv_ Not tainted
4.0.0-v4.0-150511-1451-00009-g82360a3730e6 #139
RIP: free_pcppages_bulk+0x52a/0x6f0
Call Trace:
drain_pages_zone+0x3d/0x50
drain_local_pages+0x1d/0x30
on_each_cpu_mask+0x46/0x80
drain_all_pages+0x14b/0x1e0
soft_offline_page+0x432/0x6e0
SyS_madvise+0x73c/0x780
system_call_fastpath+0x12/0x17
Code: ff 89 45 b4 48 8b 45 c0 48 83 b8 a8 00 00 00 00 0f 85 e3 fb ff ff 0f 1f 00 0f 0b 48 8b 7d 90 48 c7 c6 e8 95 a6 81 e8 e6 32 02 00 <0f> 0b 8b 45 cc 49 89 47 30 41 8b 47 18 83 f8 ff 0f 85 10 ff ff
RIP [<
ffffffff811a806a>] free_pcppages_bulk+0x52a/0x6f0
RSP <
ffff88007a117d28>
---[ end trace
53926436e76d1f35 ]---
When soft offline successfully migrates page, the source page is supposed
to be freed. But there is a race condition where a source page looks
isolated (i.e. the refcount is 0 and the PageHWPoison is set) but
somewhat linked to pcplist. Then another soft offline event calls
drain_all_pages() and tries to free such hwpoisoned page, which is
forbidden.
This odd page state seems to happen due to the race between put_page() in
putback_lru_page() and __pagevec_lru_add_fn(). But I don't want to play
with tweaking drain code as done in commit
9ab3b598d2df "mm: hwpoison:
drop lru_add_drain_all() in __soft_offline_page()", or to change page
freeing code for this soft offline's purpose.
Instead, let's think about the difference between hard offline and soft
offline. There is an interesting difference in how to isolate the in-use
page between these, that is, hard offline marks PageHWPoison of the target
page at first, and doesn't free it by keeping its refcount 1. OTOH, soft
offline tries to free the target page then marks PageHWPoison. This
difference might be the source of complexity and result in bugs like the
above. So making soft offline isolate with keeping refcount can be a
solution for this problem.
We can pass to page migration code the "reason" which shows the caller, so
let's use this more to avoid calling putback_lru_page() when called from
soft offline, which effectively does the isolation for soft offline. With
this change, target pages of soft offline never be reused without changing
migratetype, so this patch also removes the related code.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Naoya Horiguchi [Wed, 24 Jun 2015 23:56:48 +0000 (16:56 -0700)]
mm/memory-failure: introduce get_hwpoison_page() for consistent refcount handling
memory_failure() can run in 2 different mode (specified by
MF_COUNT_INCREASED) in page refcount perspective. When
MF_COUNT_INCREASED is set, memory_failure() assumes that the caller
takes a refcount of the target page. And if cleared, memory_failure()
takes it in it's own.
In current code, however, refcounting is done differently in each caller.
For example, madvise_hwpoison() uses get_user_pages_fast() and
hwpoison_inject() uses get_page_unless_zero(). So this inconsistent
refcounting causes refcount failure especially for thp tail pages.
Typical user visible effects are like memory leak or
VM_BUG_ON_PAGE(!page_count(page)) in isolate_lru_page().
To fix this refcounting issue, this patch introduces get_hwpoison_page()
to handle thp tail pages in the same manner for each caller of hwpoison
code.
memory_failure() might fail to split thp and in such case it returns
without completing page isolation. This is not good because PageHWPoison
on the thp is still set and there's no easy way to unpoison such thps. So
this patch try to roll back any action to the thp in "non anonymous thp"
case and "thp split failed" case, expecting an MCE(SRAR) generated by
later access afterward will properly free such thps.
[akpm@linux-foundation.org: fix CONFIG_HWPOISON_INJECT=m]
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Naoya Horiguchi [Wed, 24 Jun 2015 23:56:45 +0000 (16:56 -0700)]
mm/memory-failure: split thp earlier in memory error handling
memory_failure() doesn't handle thp itself at this time and need to split
it before doing isolation. Currently thp is split in the middle of
hwpoison_user_mappings(), but there're corner cases where memory_failure()
wrongly tries to handle thp without splitting.
1) "non anonymous" thp, which is not a normal operating mode of thp,
but a memory error could hit a thp before anon_vma is initialized. In
such case, split_huge_page() fails and me_huge_page() (intended for
hugetlb) is called for thp, which triggers BUG_ON in page_hstate().
2) !PageLRU case, where hwpoison_user_mappings() returns with
SWAP_SUCCESS and the result is the same as case 1.
memory_failure() can't avoid splitting, so let's split it more earlier,
which also reduces code which are prepared for both of normal page and
thp.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zhihui Zhang [Wed, 24 Jun 2015 23:56:42 +0000 (16:56 -0700)]
mm: rename RECLAIM_SWAP to RECLAIM_UNMAP
The name SWAP implies that we are dealing with anonymous pages only. In
fact, the original patch that introduced the min_unmapped_ratio logic
was to fix an issue related to file pages. Rename it to RECLAIM_UNMAP
to match what does.
Historically, commit
a6dc60f8975a ("vmscan: rename sc.may_swap to
may_unmap") renamed .may_swap to .may_unmap, leaving RECLAIM_SWAP
behind. commit
2e2e42598908 ("vmscan,memcg: reintroduce sc->may_swap")
reintroduced .may_swap for memory controller.
Signed-off-by: Zhihui Zhang <zzhsuny@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nishanth Aravamudan [Wed, 24 Jun 2015 23:56:39 +0000 (16:56 -0700)]
mm: vmscan: do not throttle based on pfmemalloc reserves if node has no reclaimable pages
Based upon
675becce15 ("mm: vmscan: do not throttle based on pfmemalloc
reserves if node has no ZONE_NORMAL") from Mel.
We have a system with the following topology:
# numactl -H
available: 3 nodes (0,2-3)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
23 24 25 26 27 28 29 30 31
node 0 size: 28273 MB
node 0 free: 27323 MB
node 2 cpus:
node 2 size: 16384 MB
node 2 free: 0 MB
node 3 cpus: 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
node 3 size: 30533 MB
node 3 free: 13273 MB
node distances:
node 0 2 3
0: 10 20 20
2: 20 10 20
3: 20 20 10
Node 2 has no free memory, because:
# cat /sys/devices/system/node/node2/hugepages/hugepages-16777216kB/nr_hugepages
1
This leads to the following zoneinfo:
Node 2, zone DMA
pages free 0
min 1840
low 2300
high 2760
scanned 0
spanned 262144
present 262144
managed 262144
...
all_unreclaimable: 1
If one then attempts to allocate some normal 16M hugepages via
echo 37 > /proc/sys/vm/nr_hugepages
The echo never returns and kswapd2 consumes CPU cycles.
This is because throttle_direct_reclaim ends up calling
wait_event(pfmemalloc_wait, pfmemalloc_watermark_ok...).
pfmemalloc_watermark_ok() in turn checks all zones on the node if there
are any reserves, and if so, then indicates the watermarks are ok, by
seeing if there are sufficient free pages.
675becce15 added a condition already for memoryless nodes. In this case,
though, the node has memory, it is just all consumed (and not
reclaimable). Effectively, though, the result is the same on this call to
pfmemalloc_watermark_ok() and thus seems like a reasonable additional
condition.
With this change, the afore-mentioned 16M hugepage allocation attempt
succeeds and correctly round-robins between Nodes 1 and 3.
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Anton Blanchard <anton@samba.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Anisse Astier [Wed, 24 Jun 2015 23:56:36 +0000 (16:56 -0700)]
mm/page_alloc.c: cleanup obsolete KM_USER*
It's been five years now that KM_* kmap flags have been removed and that
we can call clear_highpage from any context. So we remove prep_zero_pages
accordingly.
Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill A. Shutemov [Wed, 24 Jun 2015 23:56:33 +0000 (16:56 -0700)]
mm: avoid tail page refcounting on non-THP compound pages
Reintroduce
8d63d99a5dfb ("mm: avoid tail page refcounting on non-THP
compound pages") after removing bogus VM_BUG_ON_PAGE() in
put_unrefcounted_compound_page().
THP uses tail page refcounting to be able to split huge pages at any time.
Tail page refcounting is not needed for other users of compound pages and
it's harmful because of overhead.
We try to exclude non-THP pages from tail page refcounting using
__compound_tail_refcounted() check. It excludes most common non-THP
compound pages: SL*B and hugetlb, but it doesn't catch rest of __GFP_COMP
users -- drivers.
And it's not only about overhead.
Drivers might want to use compound pages to get refcounting semantics
suitable for mapping high-order pages to userspace. But tail page
refcounting breaks it.
Tail page refcounting uses ->_mapcount in tail pages to store GUP pins on
them. It means GUP pins would affect page_mapcount() for tail pages.
It's not a problem for THP, because it never maps tail pages. But unlike
THP, drivers map parts of compound pages with PTEs and it makes
page_mapcount() be called for tail pages.
In particular, GUP pins would shift PSS up and affect /proc/kpagecount for
such pages. But, I'm not aware about anything which can lead to crash or
other serious misbehaviour.
Since currently all THP pages are anonymous and all drivers pages are not,
we can fix the __compound_tail_refcounted() check by requiring PageAnon()
to enable tail page refcounting.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill A. Shutemov [Wed, 24 Jun 2015 23:56:30 +0000 (16:56 -0700)]
mm: drop bogus VM_BUG_ON_PAGE assert in put_page() codepath
My commit
8d63d99a5dfb ("mm: avoid tail page refcounting on non-THP
compound pages") which was merged during 4.1 merge window caused
regression:
page:
ffffea0010a15040 count:0 mapcount:1 mapping: (null) index:0x0
flags: 0x8000000000008014(referenced|dirty|tail)
page dumped because: VM_BUG_ON_PAGE(page_mapcount(page) != 0)
------------[ cut here ]------------
kernel BUG at mm/swap.c:134!
The problem can be reproduced by playing *two* audio files at the same
time and then stopping one of players. I used two mplayers to trigger
this.
The VM_BUG_ON_PAGE() which triggers the bug is bogus:
Sound subsystem uses compound pages for its buffers, but unlike most
__GFP_COMP sound maps compound pages to userspace with PTEs.
In our case with two players map the buffer twice and therefore elevates
page_mapcount() on tail pages by two. When one of players exits it
unmaps the VMA and drops page_mapcount() to one and try to release
reference on the page with put_page().
My commit changes which path it takes under put_compound_page(). It hits
put_unrefcounted_compound_page() where VM_BUG_ON_PAGE() is. It sees
page_mapcount() == 1. The function wrongly assumes that subpages of
compound page cannot be be mapped by itself with PTEs..
The solution is simply drop the VM_BUG_ON_PAGE().
Note: there's no need to move the check under put_page_testzero().
Allocator will check the mapcount by itself before putting on free list.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Borislav Petkov <bp@alien8.de>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rasmus Villemoes [Wed, 24 Jun 2015 23:56:28 +0000 (16:56 -0700)]
mm: only define hashdist variable when needed
For !CONFIG_NUMA, hashdist will always be 0, since it's setter is
otherwise compiled out. So we can save 4 bytes of data and some .text
(although mostly in __init functions) by only defining it for
CONFIG_NUMA.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zhang Zhen [Wed, 24 Jun 2015 23:56:25 +0000 (16:56 -0700)]
mm/hugetlb: reduce arch dependent code about hugetlb_prefault_arch_hook
Currently we have many duplicates in definitions of
hugetlb_prefault_arch_hook. In all architectures this function is empty.
Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Laurent Dufour [Wed, 24 Jun 2015 23:56:22 +0000 (16:56 -0700)]
powerpc/mm: tracking vDSO remap
Some processes (CRIU) are moving the vDSO area using the mremap system
call. As a consequence the kernel reference to the vDSO base address is
no more valid and the signal return frame built once the vDSO has been
moved is not pointing to the new sigreturn address.
This patch handles vDSO remapping and unmapping.
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Laurent Dufour [Wed, 24 Jun 2015 23:56:19 +0000 (16:56 -0700)]
mm: new arch_remap() hook
Some architectures would like to be triggered when a memory area is moved
through the mremap system call.
This patch introduces a new arch_remap() mm hook which is placed in the
path of mremap, and is called before the old area is unmapped (and the
arch_unmap() hook is called).
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Laurent Dufour [Wed, 24 Jun 2015 23:56:16 +0000 (16:56 -0700)]
mm: new mm hook framework
CRIU is recreating the process memory layout by remapping the checkpointee
memory area on top of the current process (criu). This includes remapping
the vDSO to the place it has at checkpoint time.
However some architectures like powerpc are keeping a reference to the
vDSO base address to build the signal return stack frame by calling the
vDSO sigreturn service. So once the vDSO has been moved, this reference
is no more valid and the signal frame built later are not usable.
This patch serie is introducing a new mm hook framework, and a new
arch_remap hook which is called when mremap is done and the mm lock still
hold. The next patch is adding the vDSO remap and unmap tracking to the
powerpc architecture.
This patch (of 3):
This patch introduces a new set of header file to manage mm hooks:
- per architecture empty header file (arch/x/include/asm/mm-arch-hooks.h)
- a generic header (include/linux/mm-arch-hooks.h)
The architecture which need to overwrite a hook as to redefine it in its
header file, while architecture which doesn't need have nothing to do.
The default hooks are defined in the generic header and are used in the
case the architecture is not defining it.
In a next step, mm hooks defined in include/asm-generic/mm_hooks.h should
be moved here.
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zhang Zhen [Wed, 24 Jun 2015 23:56:13 +0000 (16:56 -0700)]
mm/hugetlb: reduce arch dependent code about huge_pmd_unshare
Currently we have many duplicates in definitions of huge_pmd_unshare. In
all architectures this function just returns 0 when
CONFIG_ARCH_WANT_HUGE_PMD_SHARE is N.
This patch puts the default implementation in mm/hugetlb.c and lets these
architectures use the common code.
Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: David Rientjes <rientjes@google.com>
Cc: James Yang <James.Yang@freescale.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill A. Shutemov [Wed, 24 Jun 2015 23:56:10 +0000 (16:56 -0700)]
mm: fix mprotect() behaviour on VM_LOCKED VMAs
On mlock(2) we trigger COW on private writable VMA to avoid faults in
future.
mm/gup.c:
840 long populate_vma_page_range(struct vm_area_struct *vma,
841 unsigned long start, unsigned long end, int *nonblocking)
842 {
...
855 * We want to touch writable mappings with a write fault in order
856 * to break COW, except for shared mappings because these don't COW
857 * and we would not want to dirty them for nothing.
858 */
859 if ((vma->vm_flags & (VM_WRITE | VM_SHARED)) == VM_WRITE)
860 gup_flags |= FOLL_WRITE;
But we miss this case when we make VM_LOCKED VMA writeable via
mprotect(2). The test case:
#define _GNU_SOURCE
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/mman.h>
#include <sys/resource.h>
#include <sys/stat.h>
#include <sys/time.h>
#include <sys/types.h>
#define PAGE_SIZE 4096
int main(int argc, char **argv)
{
struct rusage usage;
long before;
char *p;
int fd;
/* Create a file and populate first page of page cache */
fd = open("/tmp", O_TMPFILE | O_RDWR, S_IRUSR | S_IWUSR);
write(fd, "1", 1);
/* Create a *read-only* *private* mapping of the file */
p = mmap(NULL, PAGE_SIZE, PROT_READ, MAP_PRIVATE, fd, 0);
/*
* Since the mapping is read-only, mlock() will populate the mapping
* with PTEs pointing to page cache without triggering COW.
*/
mlock(p, PAGE_SIZE);
/*
* Mapping became read-write, but it's still populated with PTEs
* pointing to page cache.
*/
mprotect(p, PAGE_SIZE, PROT_READ | PROT_WRITE);
getrusage(RUSAGE_SELF, &usage);
before = usage.ru_minflt;
/* Trigger COW: fault in mlock()ed VMA. */
*p = 1;
getrusage(RUSAGE_SELF, &usage);
printf("faults: %ld\n", usage.ru_minflt - before);
return 0;
}
$ ./test
faults: 1
Let's fix it by triggering populating of VMA in mprotect_fixup() on this
condition. We don't care about population error as we don't in other
similar cases i.e. mremap.
[akpm@linux-foundation.org: tweak comment text]
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jiri Kosina [Wed, 24 Jun 2015 23:56:07 +0000 (16:56 -0700)]
thp: cleanup how khugepaged enters freezer
khugepaged_do_scan() checks in every iteration whether freezing(current)
is true, and in such case breaks out of the loop, which causes
try_to_freeze() to be called immediately afterwards in
khugepaged_wait_work().
If nothing else, this causes unnecessary freezing(current) test, and also
makes the way khugepaged enters freezer a bit less obvious than necessary.
Let's just try to freeze directly, instead of splitting it into two
(directly adjacent) phases.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andi Kleen [Wed, 24 Jun 2015 23:56:05 +0000 (16:56 -0700)]
mm, hwpoison: remove obsolete "Notebook" todo list
All the items mentioned here have been either addressed, or were not
really needed. So just remove the comment.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andi Kleen [Wed, 24 Jun 2015 23:56:02 +0000 (16:56 -0700)]
mm, hwpoison: add comment describing when to add new cases
Here's another comment fix for hwpoison.
It describes the "guiding principle" on when to add new
memory error recovery code.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rasmus Villemoes [Wed, 24 Jun 2015 23:55:59 +0000 (16:55 -0700)]
linux/slab.h: fix three off-by-one typos in comment
The first is a keyboard-off-by-one, the other two the ordinary mathy kind.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Sanders [Wed, 24 Jun 2015 23:55:57 +0000 (16:55 -0700)]
slab: correct size_index table before replacing the bootstrap kmem_cache_node
This patch moves the initialization of the size_index table slightly
earlier so that the first few kmem_cache_node's can be safely allocated
when KMALLOC_MIN_SIZE is large.
There are currently two ways to generate indices into kmalloc_caches (via
kmalloc_index() and via the size_index table in slab_common.c) and on some
arches (possibly only MIPS) they potentially disagree with each other
until create_kmalloc_caches() has been called. It seems that the
intention is that the size_index table is a fast equivalent to
kmalloc_index() and that create_kmalloc_caches() patches the table to
return the correct value for the cases where kmalloc_index()'s
if-statements apply.
The failing sequence was:
* kmalloc_caches contains NULL elements
* kmem_cache_init initialises the element that 'struct
kmem_cache_node' will be allocated to. For 32-bit Mips, this is a
56-byte struct and kmalloc_index returns KMALLOC_SHIFT_LOW (7).
* init_list is called which calls kmalloc_node to allocate a 'struct
kmem_cache_node'.
* kmalloc_slab selects the kmem_caches element using
size_index[size_index_elem(size)]. For MIPS, size is 56, and the
expression returns 6.
* This element of kmalloc_caches is NULL and allocation fails.
* If it had not already failed, it would have called
create_kmalloc_caches() at this point which would have changed
size_index[size_index_elem(size)] to 7.
I don't believe the bug to be LLVM specific but GCC doesn't normally
encounter the problem. I haven't been able to identify exactly what GCC
is doing better (probably inlining) but it seems that GCC is managing to
optimize to the point that it eliminates the problematic allocations.
This theory is supported by the fact that GCC can be made to fail in the
same way by changing inline, __inline, __inline__, and __always_inline in
include/linux/compiler-gcc.h such that they don't actually inline things.
Signed-off-by: Daniel Sanders <daniel.sanders@imgtec.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Gavin Guo [Wed, 24 Jun 2015 23:55:54 +0000 (16:55 -0700)]
mm/slab_common: support the slub_debug boot option on specific object size
The slub_debug=PU,kmalloc-xx cannot work because in the
create_kmalloc_caches() the s->name is created after the
create_kmalloc_cache() is called. The name is NULL in the
create_kmalloc_cache() so the kmem_cache_flags() would not set the
slub_debug flags to the s->flags. The fix here set up a kmalloc_names
string array for the initialization purpose and delete the dynamic name
creation of kmalloc_caches.
[akpm@linux-foundation.org: s/kmalloc_names/kmalloc_info/, tweak comment text]
Signed-off-by: Gavin Guo <gavin.guo@canonical.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Akinobu Mita [Wed, 24 Jun 2015 23:55:51 +0000 (16:55 -0700)]
xtensa: use for_each_sg()
This replaces the plain loop over the sglist array with for_each_sg()
macro which consists of sg_next() function calls. Since xtensa doesn't
select ARCH_HAS_SG_CHAIN, it is not necessary to use for_each_sg() in
order to loop over each sg element. But this can help find problems
with drivers that do not properly initialize their sg tables when
CONFIG_DEBUG_SG is enabled.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chris Metcalf [Wed, 24 Jun 2015 23:55:48 +0000 (16:55 -0700)]
procfs: treat parked tasks as sleeping for task state
Allowing watchdog threads to be parked means that we now have the
opportunity of actually seeing persistent parked threads in the output
of /proc/<pid>/stat and /proc/<pid>/status. The existing code reported
such threads as "Running", which is kind-of true if you think of the
case where we park them as part of taking cpus offline. But if we allow
parking them indefinitely, "Running" is pretty misleading, so we report
them as "Sleeping" instead.
We could simply report them with a new string, "Parked", but it feels
like it's a bit risky for userspace to see unexpected new values; the
output is already documented in Documentation/filesystems/proc.txt, and
it seems like a mistake to change that lightly.
The scheduler does report parked tasks with a "P" in debugging output
from sched_show_task() or dump_cpu_task(), but that's a different API.
Similarly, the trace_ctxwake_* routines report a "P" for parked tasks,
but again, different API.
This change seemed slightly cleaner than updating the task_state_array
to have additional rows. TASK_DEAD should be subsumed by the exit_state
bits; TASK_WAKEKILL is just a modifier; and TASK_WAKING can very
reasonably be reported as "Running" (as it is now). Only TASK_PARKED
shows up with unreasonable output here.
Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chris Metcalf [Wed, 24 Jun 2015 23:55:45 +0000 (16:55 -0700)]
watchdog: add watchdog_cpumask sysctl to assist nohz
Change the default behavior of watchdog so it only runs on the
housekeeping cores when nohz_full is enabled at build and boot time.
Allow modifying the set of cores the watchdog is currently running on
with a new kernel.watchdog_cpumask sysctl.
In the current system, the watchdog subsystem runs a periodic timer that
schedules the watchdog kthread to run. However, nohz_full cores are
designed to allow userspace application code running on those cores to
have 100% access to the CPU. So the watchdog system prevents the
nohz_full application code from being able to run the way it wants to,
thus the motivation to suppress the watchdog on nohz_full cores, which
this patchset provides by default.
However, if we disable the watchdog globally, then the housekeeping
cores can't benefit from the watchdog functionality. So we allow
disabling it only on some cores. See Documentation/lockup-watchdogs.txt
for more information.
[jhubbard@nvidia.com: fix a watchdog crash in some configurations]
Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chris Metcalf [Wed, 24 Jun 2015 23:55:42 +0000 (16:55 -0700)]
smpboot: allow excluding cpus from the smpboot threads
This patch series allows the watchdog to run by default only on the
housekeeping cores when nohz_full is in effect; this seems to be a good
compromise short of turning it off completely (since the nohz_full cores
can't tolerate a watchdog).
To provide customizability, we add /proc/sys/kernel/watchdog_cpumask so
that the set of cores running the watchdog can be tuned to different
values after bootup.
To implement this customizability, we add a new
smpboot_update_cpumask_percpu_thread() API to the smpboot_thread
subsystem that lets us park or unpark "unwanted" threads.
And now that threads can be parked for long periods of time, we tweak the
/proc/<pid>/stat and /proc/<pid>/status code so parked threads aren't
reported as running, which is otherwise confusing.
This patch (of 3):
This change allows some cores to be excluded from running the
smp_hotplug_thread tasks. The following commit to update
kernel/watchdog.c to use this functionality is the motivating example, and
more information on the motivation is provided there.
A new smp_hotplug_thread field is introduced, "cpumask", which is cpumask
field managed by the smpboot subsystem that indicates whether or not the
given smp_hotplug_thread should run on that core; the cpumask is checked
when deciding whether to unpark the thread.
To limit the cpumask to less than cpu_possible, you must call
smpboot_update_cpumask_percpu_thread() after registering.
Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Akinobu Mita [Wed, 24 Jun 2015 23:55:40 +0000 (16:55 -0700)]
sparc: use for_each_sg()
This replaces the plain loop over the sglist array with for_each_sg()
macro which consists of sg_next() function calls. Since sparc does select
ARCH_HAS_SG_CHAIN, it is necessary to use for_each_sg() in order to loop
over each sg element. This also help find problems with drivers that do
not properly initialize their sg tables when CONFIG_DEBUG_SG is enabled.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Akinobu Mita [Wed, 24 Jun 2015 23:55:37 +0000 (16:55 -0700)]
parisc: use for_each_sg()
This replaces the plain loop over the sglist array with for_each_sg()
macro which consists of sg_next() function calls. Since parisc doesn't
select ARCH_HAS_SG_CHAIN, it is not necessary to use for_each_sg() in
order to loop over each sg element. But this can help find problems with
drivers that do not properly initialize their sg tables when
CONFIG_DEBUG_SG is enabled.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joseph Qi [Wed, 24 Jun 2015 23:55:34 +0000 (16:55 -0700)]
ocfs2: mark local functions as static
Some functions are only used locally, so mark them as static.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fabian Frederick [Wed, 24 Jun 2015 23:55:31 +0000 (16:55 -0700)]
ocfs2: use swap() in ocfs2_double_lock()
Use kernel.h macro definition.
Thanks to Julia Lawall for Coccinelle scripting support.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fabian Frederick [Wed, 24 Jun 2015 23:55:29 +0000 (16:55 -0700)]
ocfs2: use swap() in swap_refcount_rec()
Use kernel.h macro definition.
Thanks to Julia Lawall for Coccinelle scripting support.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fabian Frederick [Wed, 24 Jun 2015 23:55:26 +0000 (16:55 -0700)]
ocfs2: use swap() in dx_leaf_sort_swap()
Use kernel.h macro definition.
Thanks to Julia Lawall for Coccinelle scripting support.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joseph Qi [Wed, 24 Jun 2015 23:55:23 +0000 (16:55 -0700)]
ocfs2: fix wrong check in ocfs2_direct_IO_get_blocks
contig_blocks gotten from ocfs2_extent_map_get_blocks cannot be compared
with clusters_to_alloc. So convert it to clusters first.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Weiwei Wang <wangww631@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Xue jiufei [Wed, 24 Jun 2015 23:55:20 +0000 (16:55 -0700)]
ocfs2: fix NULL pointer dereference in function ocfs2_abort_trigger()
ocfs2_abort_trigger() use bh->b_assoc_map to get sb. But there's no
function to set bh->b_assoc_map in ocfs2, it will trigger NULL pointer
dereference while calling this function. We can get sb from
bh->b_bdev->bd_super instead of b_assoc_map.
[akpm@linux-foundation.org: update comment, per Joseph]
Signed-off-by: joyce.xue <xuejiufei@huawei.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
alex chen [Wed, 24 Jun 2015 23:55:18 +0000 (16:55 -0700)]
ocfs2: o2net: should remove debugfs in o2net_init() out branch
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
WeiWei Wang [Wed, 24 Jun 2015 23:55:15 +0000 (16:55 -0700)]
ocfs2: remove OCFS2_IOCB_SEM lock type in direct io
In ocfs2 direct read/write, OCFS2_IOCB_SEM lock type is used to protect
inode->i_alloc_sem rw semaphore lock in the earlier kernel version.
However, in the latest kernel, inode->i_alloc_sem rw semaphore lock is not
used at all, so OCFS2_IOCB_SEM lock type needs to be removed.
Signed-off-by: Weiwei Wang <wangww631@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joseph Qi [Wed, 24 Jun 2015 23:55:12 +0000 (16:55 -0700)]
ocfs2: do not BUG if jbd2_journal_dirty_metadata fails
jbd2_journal_dirty_metadata may fail. Currently it cannot take care of
non zero return value and just BUG in ocfs2_journal_dirty. This patch is
aborting the handle and journal instead of BUG.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: joyce.xue <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Xue jiufei [Wed, 24 Jun 2015 23:55:09 +0000 (16:55 -0700)]
ocfs2: remove BUG_ON(!empty_extent) in __ocfs2_rotate_tree_left()
ocfs2_rotate_tree_left() calls __ocfs2_rotate_tree_left() for left
rotation while non-rightmost path containing an empty extent in the leaf
block. __ocfs2_rotate_tree_left() returns -EAGAIN if right subtree having an
empty extent and pass the empty_extent_path to caller. The caller
ocfs2_rotate_tree_left() will restart rotation from the returned path.
It will trigger the BUG_ON(!ocfs2_is_empty_extent) when the et on disk
is as follows:
eb0 is the leaf block of path(say path_a) passed to
ocfs2_rotate_tree_left, which has an empty rec[0].
eb1 is the leaf block of path(say path_b) that just right to path_a, which
has no empty record.
eb2 is the leaf block of path(say path_c) that just right to path_b, which
has an empty rec[0]. And path_c is also the rightmost path.
Now we want to remove the empty rec[0] in eb0:
ocfs2_rotate_tree_left:
-> call __ocfs2_rotate_tree_left with path_a as its input *path*
-> call ocfs2_rotate_subtree_left with path_a as its input
*left_path* and path_b as its input *right_path*. it will move
rec[0] in eb1 to eb0, and rec[0] in eb0 is not empty now.
-> continue to call ocfs2_rotate_subtree_left with path_b as its
input *left_path* and path_c as its input *right_path*, and
return -EAGAIN because eb2 has an empty rec[0]
-> call __ocfs2_rotate_tree_left with path_c as it input, rotate all
records in eb2 to left and return 0.
-> call __ocfs2_rotate_tree_left with path_a as its input, and triggers
the BUG_ON(!ocfs2_is_empty_extent) as the rec[0] in eb0 is not empty.
So the BUG_ON() should be removed and return 0 if rec[0] is no longer an
empty extent.
Signed-off-by: joyce.xue <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Xue jiufei [Wed, 24 Jun 2015 23:55:07 +0000 (16:55 -0700)]
ocfs2: return error when ocfs2_figure_merge_contig_type() fails
ocfs2_figure_merge_contig_type() still returns CONTIG_NONE when some error
occurs which will cause an unpredictable error. So return a proper errno
when ocfs2_figure_merge_contig_type() fails.
Signed-off-by: joyce.xue <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joseph Qi [Wed, 24 Jun 2015 23:55:04 +0000 (16:55 -0700)]
ocfs2/dlm: cleanup unused function __dlm_wait_on_lockres_flags_set
__dlm_wait_on_lockres_flags_set() is declared but not implemented and
used. So remove it.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daeseok Youn [Wed, 24 Jun 2015 23:55:01 +0000 (16:55 -0700)]
ocfs2: use retval instead of status for checking error
The use of 'status' in __ocfs2_add_entry() can return wrong value.
Some functions' return value in __ocfs2_add_entry(), i.e
ocfs2_journal_access_di() is saved to 'status'. But 'status' is not
used in 'bail' label for returning result of __ocfs2_add_entry().
So use retval instead of status.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joseph Qi [Wed, 24 Jun 2015 23:54:59 +0000 (16:54 -0700)]
ocfs2: fix a tiny race when truncate dio orohaned entry
Once dio crashed it will leave an entry in orphan dir. And orphan scan
will take care of the clean up. There is a tiny race case that the same
entry will be truncated twice and then trigger the BUG in
ocfs2_del_inode_from_orphan.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Wed, 24 Jun 2015 23:54:56 +0000 (16:54 -0700)]
ocfs2: remove __mlog_cpu_guess
raw_smp_processor_id() is the means of avoiding the runtime preemptibility
check.
[akpm@linux-foundation.org: fix printk warning]
Cc: Joe Perches <joe@perches.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Wed, 24 Jun 2015 23:54:53 +0000 (16:54 -0700)]
ocfs2: reduce object size of mlog uses
Using a function for __mlog_printk instead of a macro reduces the object
size of built-in.o by about 190KB, or ~18% overall (x86-64 defconfig
with all ocfs2 options)
$ size fs/ocfs2/built-in.o*
text data bss dec hex filename
870954 118471 134408
1123833 1125f9 fs/ocfs2/built-in.o,new
1064081 118071 134408
1316560 1416d0 fs/ocfs2/built-in.o.old
Miscellanea:
- Move the used-once __mlog_cpu_guess statement expression macro to the
masklog.c file above the use in __mlog_printk function
- Simplify the mlog macro moving the and/or logic and level code into
__mlog_printk
[akpm@linux-foundation.org: export __mlog_printk() to other ocfs2 modules]
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fabian Frederick [Wed, 24 Jun 2015 23:54:51 +0000 (16:54 -0700)]
configfs: unexport/make static config_item_init()
config_item_init() is only used in item.c
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pekka Enberg [Wed, 24 Jun 2015 23:54:48 +0000 (16:54 -0700)]
NTFS: use kvfree() in ntfs_free()
Use kvfree() instead of open-coding it.
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Cc: Anton Altaparmakov <anton@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nikolay Borisov [Wed, 24 Jun 2015 23:54:45 +0000 (16:54 -0700)]
fsnotify: remove obsolete documentation
should_send_event is no longer part of struct fsnotify_ops, so remove it.
Signed-off-by: Nikolay Borisov <kernel@kyup.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Akinobu Mita [Wed, 24 Jun 2015 23:54:43 +0000 (16:54 -0700)]
powerpc: use for_each_sg()
This replaces the plain loop over the sglist array with for_each_sg()
macro which consists of sg_next() function calls. Since powerpc does
select ARCH_HAS_SG_CHAIN, it is necessary to use for_each_sg() in order
to loop over each sg element. This also help find problems with drivers
that do not properly initialize their sg tables when CONFIG_DEBUG_SG is
enabled.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Akinobu Mita [Wed, 24 Jun 2015 23:54:40 +0000 (16:54 -0700)]
metag: use for_each_sg()
This replaces the plain loop over the sglist array with for_each_sg()
macro which consists of sg_next() function calls. Since metag doesn't
select ARCH_HAS_SG_CHAIN, it is not necessary to use for_each_sg() in
order to loop over each sg element. But this can help find problems
with drivers that do not properly initialize their sg tables when
CONFIG_DEBUG_SG is enabled.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 24 Jun 2015 17:02:15 +0000 (10:02 -0700)]
Merge tag 'arm64-upstream' of git://git./linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"Mostly refactoring/clean-up:
- CPU ops and PSCI (Power State Coordination Interface) refactoring
following the merging of the arm64 ACPI support, together with
handling of Trusted (secure) OS instances
- Using fixmap for permanent FDT mapping, removing the initial dtb
placement requirements (within 512MB from the start of the kernel
image). This required moving the FDT self reservation out of the
memreserve processing
- Idmap (1:1 mapping used for MMU on/off) handling clean-up
- Removing flush_cache_all() - not safe on ARM unless the MMU is off.
Last stages of CPU power down/up are handled by firmware already
- "Alternatives" (run-time code patching) refactoring and support for
immediate branch patching, GICv3 CPU interface access
- User faults handling clean-up
And some fixes:
- Fix for VDSO building with broken ELF toolchains
- Fix another case of init_mm.pgd usage for user mappings (during
ASID roll-over broadcasting)
- Fix for FPSIMD reloading after CPU hotplug
- Fix for missing syscall trace exit
- Workaround for .inst asm bug
- Compat fix for switching the user tls tpidr_el0 register"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (42 commits)
arm64: use private ratelimit state along with show_unhandled_signals
arm64: show unhandled SP/PC alignment faults
arm64: vdso: work-around broken ELF toolchains in Makefile
arm64: kernel: rename __cpu_suspend to keep it aligned with arm
arm64: compat: print compat_sp instead of sp
arm64: mm: Fix freeing of the wrong memmap entries with !SPARSEMEM_VMEMMAP
arm64: entry: fix context tracking for el0_sp_pc
arm64: defconfig: enable memtest
arm64: mm: remove reference to tlb.S from comment block
arm64: Do not attempt to use init_mm in reset_context()
arm64: KVM: Switch vgic save/restore to alternative_insn
arm64: alternative: Introduce feature for GICv3 CPU interface
arm64: psci: fix !CONFIG_HOTPLUG_CPU build warning
arm64: fix bug for reloading FPSIMD state after CPU hotplug.
arm64: kernel thread don't need to save fpsimd context.
arm64: fix missing syscall trace exit
arm64: alternative: Work around .inst assembler bugs
arm64: alternative: Merge alternative-asm.h into alternative.h
arm64: alternative: Allow immediate branch as alternative instruction
arm64: Rework alternate sequence for ARM erratum 845719
...
Linus Torvalds [Wed, 24 Jun 2015 16:36:49 +0000 (09:36 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull first batch of KVM updates from Paolo Bonzini:
"The bulk of the changes here is for x86. And for once it's not for
silicon that no one owns: these are really new features for everyone.
Details:
- ARM:
several features are in progress but missed the 4.2 deadline.
So here is just a smattering of bug fixes, plus enabling the
VFIO integration.
- s390:
Some fixes/refactorings/optimizations, plus support for 2GB
pages.
- x86:
* host and guest support for marking kvmclock as a stable
scheduler clock.
* support for write combining.
* support for system management mode, needed for secure boot in
guests.
* a bunch of cleanups required for the above
* support for virtualized performance counters on AMD
* legacy PCI device assignment is deprecated and defaults to "n"
in Kconfig; VFIO replaces it
On top of this there are also bug fixes and eager FPU context
loading for FPU-heavy guests.
- Common code:
Support for multiple address spaces; for now it is used only for
x86 SMM but the s390 folks also have plans"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (124 commits)
KVM: s390: clear floating interrupt bitmap and parameters
KVM: x86/vPMU: Enable PMU handling for AMD PERFCTRn and EVNTSELn MSRs
KVM: x86/vPMU: Implement AMD vPMU code for KVM
KVM: x86/vPMU: Define kvm_pmu_ops to support vPMU function dispatch
KVM: x86/vPMU: introduce kvm_pmu_msr_idx_to_pmc
KVM: x86/vPMU: reorder PMU functions
KVM: x86/vPMU: whitespace and stylistic adjustments in PMU code
KVM: x86/vPMU: use the new macros to go between PMC, PMU and VCPU
KVM: x86/vPMU: introduce pmu.h header
KVM: x86/vPMU: rename a few PMU functions
KVM: MTRR: do not map huge page for non-consistent range
KVM: MTRR: simplify kvm_mtrr_get_guest_memory_type
KVM: MTRR: introduce mtrr_for_each_mem_type
KVM: MTRR: introduce fixed_mtrr_addr_* functions
KVM: MTRR: sort variable MTRRs
KVM: MTRR: introduce var_mtrr_range
KVM: MTRR: introduce fixed_mtrr_segment table
KVM: MTRR: improve kvm_mtrr_get_guest_memory_type
KVM: MTRR: do not split 64 bits MSR content
KVM: MTRR: clean up mtrr default type
...
Linus Torvalds [Wed, 24 Jun 2015 15:46:32 +0000 (08:46 -0700)]
Merge tag 'powerpc-4.2-1' of git://git./linux/kernel/git/mpe/linux
Pull powerpc updates from Michael Ellerman:
- disable the 32-bit vdso when building LE, so we can build with a
64-bit only toolchain.
- EEH fixes from Gavin & Richard.
- enable the sys_kcmp syscall from Laurent.
- sysfs control for fastsleep workaround from Shreyas.
- expose OPAL events as an irq chip by Alistair.
- MSI ops moved to pci_controller_ops by Daniel.
- fix for kernel to userspace backtraces for perf from Anton.
- merge pseries and pseries_le defconfigs from Cyril.
- CXL in-kernel API from Mikey.
- OPAL prd driver from Jeremy.
- fix for DSCR handling & tests from Anshuman.
- Powernv flash mtd driver from Cyril.
- dynamic DMA Window support on powernv from Alexey.
- LLVM clang fixes & workarounds from Anton.
- reworked version of the patch to abort syscalls when transactional.
- fix the swap encoding to support 4TB, from Aneesh.
- various fixes as usual.
- Freescale updates from Scott: Highlights include more 8xx
optimizations, an e6500 hugetlb optimization, QMan device tree nodes,
t1024/t1023 support, and various fixes and cleanup.
* tag 'powerpc-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (180 commits)
cxl: Fix typo in debug print
cxl: Add CXL_KERNEL_API config option
powerpc/powernv: Fix wrong IOMMU table in pnv_ioda_setup_bus_dma()
powerpc/mm: Change the swap encoding in pte.
powerpc/mm: PTE_RPN_MAX is not used, remove the same
powerpc/tm: Abort syscalls in active transactions
powerpc/iommu/ioda2: Enable compile with IOV=on and IOMMU_API=off
powerpc/include: Add opal-prd to installed uapi headers
powerpc/powernv: fix construction of opal PRD messages
powerpc/powernv: Increase opal-irqchip initcall priority
powerpc: Make doorbell check preemption safe
powerpc/powernv: pnv_init_idle_states() should only run on powernv
macintosh/nvram: Remove as unused
powerpc: Don't use gcc specific options on clang
powerpc: Don't use -mno-strict-align on clang
powerpc: Only use -mtraceback=no, -mno-string and -msoft-float if toolchain supports it
powerpc: Only use -mabi=altivec if toolchain supports it
powerpc: Fix duplicate const clang warning in user access code
vfio: powerpc/spapr: Support Dynamic DMA windows
vfio: powerpc/spapr: Register memory and define IOMMU v2
...
Linus Torvalds [Wed, 24 Jun 2015 15:45:27 +0000 (08:45 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
"Pretty boring for a merge window pull.
One change in behaviour is the patch for dasd driver, the module which
provides the diagnose discipline is now loaded automatically.
The SCLP code got a nice cleanup, a new global structure replaces a
bunch of accessor functions.
And a couple of random, small improvements"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pci: improve handling of hotplug event 0x301
s390/setup: fix DMA_API_DEBUG warnings
s390/zcrypt: remove obsolete __constant
s390/keyboard: avoid off-by-one when using strnlen_user()
s390/sclp: pass timeout as HZ independent value
s390/mm: s/specifiation/specification/, s/an specification/a specification/
s390/sclp: Use DECLARE_BITMAP
s390/dasd: Enable automatic loading of dasd_diag_mod
s390/sclp: move sclp_facilities into "struct sclp"
s390/sclp: get rid of sclp_get_mtid() and sclp_get_mtid_max()
s390/sclp: unify basic sclp access by exposing "struct sclp"
s390/sclp: prepare smp_fill_possible_mask for global "struct sclp"
Linus Torvalds [Wed, 24 Jun 2015 15:44:40 +0000 (08:44 -0700)]
Merge tag 'microblaze-4.2-rc1' of git://git.monstr.eu/linux-2.6-microblaze
Pull Microblaze updates from Michal Simek:
- some PCI fixups
- add new MB versions
- sparse fixups
* tag 'microblaze-4.2-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze/PCI: Remove unnecessary struct pci_dev declaration
microblaze/PCI: Remove unnecessary pci_bus_find_capability() declaration
microblaze/PCI: Remove unused declarations
microblaze: Label local function static
microblaze: Add missing release version code
Linus Torvalds [Wed, 24 Jun 2015 01:27:19 +0000 (18:27 -0700)]
Merge tag 'iommu-updates-v4.2' of git://git./linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
"This time with bigger changes than usual:
- A new IOMMU driver for the ARM SMMUv3.
This IOMMU is pretty different from SMMUv1 and v2 in that it is
configured through in-memory structures and not through the MMIO
register region. The ARM SMMUv3 also supports IO demand paging for
PCI devices with PRI/PASID capabilities, but this is not
implemented in the driver yet.
- Lots of cleanups and device-tree support for the Exynos IOMMU
driver. This is part of the effort to bring Exynos DRM support
upstream.
- Introduction of default domains into the IOMMU core code.
The rationale behind this is to move functionalily out of the IOMMU
drivers to common code to get to a unified behavior between
different drivers. The patches here introduce a default domain for
iommu-groups (isolation groups).
A device will now always be attached to a domain, either the
default domain or another domain handled by the device driver. The
IOMMU drivers have to be modified to make use of that feature. So
long the AMD IOMMU driver is converted, with others to follow.
- Patches for the Intel VT-d drvier to fix DMAR faults that happen
when a kdump kernel boots.
When the kdump kernel boots it re-initializes the IOMMU hardware,
which destroys all mappings from the crashed kernel. As this
happens before the endpoint devices are re-initialized, any
in-flight DMA causes a DMAR fault. These faults cause PCI master
aborts, which some devices can't handle properly and go into an
undefined state, so that the device driver in the kdump kernel
fails to initialize them and the dump fails.
This is now fixed by copying over the mapping structures (only
context tables and interrupt remapping tables) from the old kernel
and keep the old mappings in place until the device driver of the
new kernel takes over. This emulates the the behavior without an
IOMMU to the best degree possible.
- A couple of other small fixes and cleanups"
* tag 'iommu-updates-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (69 commits)
iommu/amd: Handle large pages correctly in free_pagetable
iommu/vt-d: Don't disable IR when it was previously enabled
iommu/vt-d: Make sure copied over IR entries are not reused
iommu/vt-d: Copy IR table from old kernel when in kdump mode
iommu/vt-d: Set IRTA in intel_setup_irq_remapping
iommu/vt-d: Disable IRQ remapping in intel_prepare_irq_remapping
iommu/vt-d: Move QI initializationt to intel_setup_irq_remapping
iommu/vt-d: Move EIM detection to intel_prepare_irq_remapping
iommu/vt-d: Enable Translation only if it was previously disabled
iommu/vt-d: Don't disable translation prior to OS handover
iommu/vt-d: Don't copy translation tables if RTT bit needs to be changed
iommu/vt-d: Don't do early domain assignment if kdump kernel
iommu/vt-d: Allocate si_domain in init_dmars()
iommu/vt-d: Mark copied context entries
iommu/vt-d: Do not re-use domain-ids from the old kernel
iommu/vt-d: Copy translation tables from old kernel
iommu/vt-d: Detect pre enabled translation
iommu/vt-d: Make root entry visible for hardware right after allocation
iommu/vt-d: Init QI before root entry is allocated
iommu/vt-d: Cleanup log messages
...
Linus Torvalds [Wed, 24 Jun 2015 00:38:39 +0000 (17:38 -0700)]
Merge tag 'for-linus-
20150623' of git://git.infradead.org/linux-mtd
Pull MTD updates from Brian Norris:
"JFFS2:
- fix a theoretical unbalanced locking issue; the lock handling was a
bit unclean, but AFAICT, it didn't actually lead to real deadlocks
NAND:
- brcmnand driver: new driver supporting NAND controller found
originally on Broadcom STB SoCs (BCM7xxx), but now also found on
BCM63xxx, iProc (e.g., Cygnus, BCM5301x), BCM3xxx, and more
- begin factoring out BBT code so it can be shared between
traditional (parallel) NAND drivers and upcoming SPI NAND drivers
(WIP)
- add common DT-based init support, so nand_base can pick up some
flash properties automatically, using established common NAND DT
properties
- mxc_nand: support 8-bit ECC
- pxa3xx_nand:
* fix build for ARM64
* use a jiffies-based timeout
SPI NOR:
- add a few new IDs
- clear out some unnecessary entries
- make sure SECT_4K flags are correct for all (?) entries
Core:
- fix mtd->usecount race conditions (BUG_ON())
- switch to modern PM ops
Other:
- CFI: save code space by de-inlining large functions
- clean up some partition parser selection code across several
drivers
- various miscellaneous changes, mostly minor"
* tag 'for-linus-
20150623' of git://git.infradead.org/linux-mtd: (57 commits)
mtd: docg3: Fix kasprintf() usage
mtd: docg3: Don't leak docg3->bbt in error path
mtd: nandsim: Fix kasprintf() usage
mtd: cs553x_nand: Fix kasprintf() usage
mtd: r852: Fix device_create_file() usage
mtd: brcmnand: drop unnecessary initialization
mtd: propagate error codes from add_mtd_device()
mtd: diskonchip: remove two-phase partitioning / registration
mtd:
dc21285: use raw spinlock functions for nw_gpio_lock
mtd: chips: fixup dependencies, to prevent build error
mtd: cfi_cmdset_0002: Initialize datum before calling map_word_load_partial
mtd: cfi: deinline large functions
mtd: lantiq-flash: use default partition parsers
mtd: plat_nand: use default partition probe
mtd: nand: correct indentation within conditional
mtd: remove incorrect file name
mtd: blktrans: use better error code for unimplemented ioctl()
mtd: maps: Spelling s/reseved/reserved/
mtd: blktrans: change blktrans_getgeo return value
mtd: mxc_nand: generate nand_ecclayout for 8 bit ECC
...
Linus Torvalds [Wed, 24 Jun 2015 00:31:27 +0000 (17:31 -0700)]
Merge tag 'mfd-for-linus-4.2' of git://git./linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Changes to existing drivers:
- Constify structures; throughout the subsystem
- Move support to DT in; cros_ec
- DT changes and documentation; cros-ec, max77693, max77686, arizona, da9063
- ACPI changes and documentation; mfd-core
- Use different platform specific API in; cros_ec_*, arizona-core
- Remove unused parent field from; cros_ec_i2c
- Add wake-up/reset delay in; cross_ec_spi, arizona-core
- Staticise structures/functions in; cros_ec
- Remove redundant code; arizona-core, max77686
- Bugfix; twl4030-power
- Allow compile test; aat2870, tps65910
- MAINTAINERS adaptions; samsung, syscon
- Resource Management (devm_*); arizona-core
- Refactor Reset code; arizona-core
- Insist on at least one full boot; arizona-core
- Trivial formatting; arizona-core
- Add low-power-sleep; arizona-core
- IRQ ONESHOT changes; twl4030-irq, mc13xxx-core, wm831x-auxadc, htc-i2cpld,
wm8350-core, ab8500-debugfs, ab8500-gpadc, si476x-i2c
(Re-)moved drivers:
- Move protocol helpers out to drivers/platform; cros_ec
New drivers/supported devices:
- Add support for AXP22x into axp20x
- Add support for OnKey into da9063-core
- Add support for Pinctrl into mt6397-core
- New STMicroelectronics LPC Watchdog driver
- New STMicroelectronics LPC Real-Time Clock driver"
* tag 'mfd-for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (59 commits)
mfd: lpc_ich: Assign subdevice ids automatically
mfd: si476x-i2c: Pass the IRQF_ONESHOT flag
mfd: ab8500-gpadc: Pass the IRQF_ONESHOT flag
mfd: ab8500-debugfs: Pass the IRQF_ONESHOT flag
mfd: wm8350-core: Pass the IRQF_ONESHOT flag
mfd: htc-i2cpld: Pass the IRQF_ONESHOT flag
mfd: wm831x-auxadc: Pass the IRQF_ONESHOT flag
mfd: mc13xxx-core: Pass the IRQF_ONESHOT flag
mfd: twl4030-irq: Pass the IRQF_ONESHOT flag
mfd: mt6397-core: Add GPIO sub-module support
mfd: arizona: Add convience defines for micd_rate/micd_bias_starttime
mfd: dt: Add bindings for DA9063 OnKey
mfd: da9063: Add support for OnKey driver
mfd: arizona: Fix incorrect Makefile conditionals
mfd: arizona: Add stub for wm5102_patch()
mfd: Check ACPI device companion before checking resources
Documentation: Add WM8998/WM1814 device tree bindings
mfd: arizona: Split INx_MODE into two fields
mfd: wm5110: Add delay before releasing reset line
mfd: arizona: Add better support for system suspend
...
Linus Torvalds [Wed, 24 Jun 2015 00:30:20 +0000 (17:30 -0700)]
Merge tag 'regulator-v4.2' of git://git./linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"Another fairly quiet release, some new drivers with generic handling
for minor features but nothing that makes a substantial difference
outside of the subsystem or for most boards:
- support for a bunch of new parameters which are present on enough
regulators to be worth having generic handling for in the
framework.
- fixes for some issues with printing constraints during boot which
should probably have gone in for v4.1 but didn't.
- new drivers for Dialog DA9062, Maxim MAX77621 and Qualcomm SPMI
regulators"
* tag 'regulator-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (45 commits)
regulator: qcom_spmi: Fix calculating number of voltages
regulator: qcom_spmi: Add missing braces for aligned code
regulator: fix simple_return.cocci warnings
regulator: Add QCOM SPMI regulator driver
regulator: Add docbook for soft start
regulator: Add input current limit support
regulator: Add soft start support
regulator: Add pull down support
regulator: Add system_load constraint
regulator: max8973: Fix up ramp_delay for MAX8973_RAMP_25mV_PER_US case
regulator: core: replace sprintf with scnprintf
regulator: core: fix constraints output buffer
regulator: core: Don't corrupt display when printing uV offsets
regulator: max8973: add support for MAX77621
regulator: max8973: configure ramp delay through callback
regulator: pwm-regulator: Diffientiate between dev (device) and rdev (regulator_dev)
regulator: pwm-regulator: Remove superfluous is_enabled check
regulator: pwm-regulator: Remove unnecessary descriptor attribute from ddata
regulator: core: Don't spew backtraces on duplicate sysfs
regulator: da9063: Fix up irq leak
...
Linus Torvalds [Wed, 24 Jun 2015 00:27:09 +0000 (17:27 -0700)]
Merge tag 'spi-v4.2' of git://git./linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"No framework updates for the SPI API this time around aside from one
small fix, just driver improvments. Some highlights include:
- New driver support for CSR USP, Mikrotik RB4xx and Zynq GQSPI
controllers.
- Modernisation of the OMAP McSPI controller driver, moving it to
current APIs to enable support for a wider range of client drivers.
- DMA support for the bcm2835 controller"
* tag 'spi-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (60 commits)
spi: zynq: Remove execute bit
spi: atmel: add support to FIFOs
spi: atmel: update DT bindings documentation
spi: spi-fsl-dspi: Update DT binding documentation
spi: pxa2xx: Constify ACPI device ids
spi: Add support for Zynq Ultrascale+ MPSoC GQSPI controller
spi: zynq: Add DT bindings documentation for Zynq Ultrascale+ MPSoC GQSPI controller
spi: fsl-dspi: Use pinctrl PM helpers
spi: davinci: change the lower limit of pre-scale divider to 1
spi: spi-fsl-dspi: Change the way of increasing spi_message->actual_length
spi: spi-fsl-dspi: Enable TCF interrupt mode support
spi: atmel: add support for the internal chip-select of the spi controller
spi: spi-pxa2xx: remove legacy PXA DMA bits
spi: pxa2xx: Make LPSS SPI general register optional
spi: pxa2xx: Prepare for new Intel LPSS SPI type
spi: pxa2xx: Differentiate Intel LPSS types
spi: restore rx/tx_buf in case of unset CONFIG_HAS_DMA
spi: rspi: Re-do the returning value of qspi_transfer_out_in
spi: rspi: modify the name of "qspi_trigger_transfer_out_int" function
spi: orion: Fix extended baud rates for each Armada SoCs
...
Linus Torvalds [Wed, 24 Jun 2015 00:25:32 +0000 (17:25 -0700)]
Merge tag 'regmap-v4.2' of git://git./linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"As well as a few fixes and updates for API changes there's two new
features for the API:
- Better support for handling a reset of the underlying hardware,
marking the register map as needing a resync to the device when we
need to do that automatically
- Support for querying the size and stride of the register map,
allowing higher level frameworks to configure themselves more
readily"
* tag 'regmap-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Fix possible shift overflow in regmap_field_init()
regmap: Fix regmap_bulk_read in BE mode
regmap: kill off set_irq_flags usage
regmap: irq: Fixed a typo error
regmap: drop unneeded goto
regmap: Introduce regmap_get_reg_stride
regmap: Introduce regmap_get_max_register
regmap: Use regcache_mark_dirty() to indicate power loss or reset
regmap: Add a helper function for regcache sync test
regmap: Constify irq_domain_ops
Linus Torvalds [Tue, 23 Jun 2015 23:23:30 +0000 (16:23 -0700)]
Merge tag 'fbdev-4.2' of git://git./linux/kernel/git/tomba/linux
Pull fbdev updates from Tomi Valkeinen:
- ssd1307fb: various fixes and improvements, SSD1305 support
- use architecture agnostic functions instead of MTRR functions in
various fbdev drivers
- TI DRA7xx SoC display support (arch/arm/ side)
- OMAPDSS componentization to fix probing order issues
- OMAPDSS scaling fixes
- msm_fb: remove obsoleted driver
* tag 'fbdev-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (77 commits)
msm: msm_fb: Remove dead code
OMAPDSS: HDMI: wait for framedone when stopping video
OMAPDSS: HDMI4: fix error handling
OMAPDSS: DISPC: scaler debug print
OMAPDSS: DISPC: do only y decimation on OMAP3
OMAPDSS: DISPC: check if scaling setup failed
OMAPDSS: DISPC: fix 64 bit issue in 5-tap
OMAPDSS: DISPC: fix row_inc for OMAP3
OMAPDSS: DISPC: add check for scaling limits
OMAPDSS: DISPC: fix check_horiz_timing_omap3 args
OMAPDSS: DISPC: fix predecimation for YUV modes
OMAPDSS: DISPC: work-around for errata i631
OMAPDSS: simplify submodule reg/unreg code
OMAPDSS: componentize omapdss
OMAPDSS: reorder uninit calls
OMAPDSS: remove uses of __init/__exit
OMAPDSS: fix dss_init_ports error handling
OMAPDSS: refactor dss probe function
OMAPDSS: move 'dss_initialized' to dss driver
fbdev: propagate result of fb_videomode_from_videomode()
...
Linus Torvalds [Tue, 23 Jun 2015 23:10:27 +0000 (16:10 -0700)]
Merge tag 'for-4.2' of git://git.infradead.org/battery-2.6
Pull power supply and reset updates from Sebastian Reichel:
- new charger drivers: BQ24257, BQ25890, AXP288, RT9455
- MAX17042 battery: add health & temperature support
- BQ2415x charger: add ACPI support
- misc fixes and cleanups
* tag 'for-4.2' of git://git.infradead.org/battery-2.6: (32 commits)
power_supply: Correct kerneldoc copy paste errors
wm831x_power: Fix off-by-one at free_irq()
power_supply: rt9455_charger: Fix error reported by static analysis tool
power_supply: bq24257: use flags argument of devm_gpiod_get
power_supply: bq25890: use flags argument of devm_gpiod_get
sbs-battery: add option to always register battery
power: Add devm_power_supply_get_by_phandle() helper function
power_supply: max17042: Add OF support for setting thresholds
power_supply: sysfs: Bring back write to writeable properties
power_supply: rt9455_charger: Check if CONFIG_USB_PHY is enabled
power: reset: gpio-restart: increase priority slightly
power_supply: bq25890: make chip_id int
power_supply: Add support for Richtek RT9455 battery charger
Documentation: devicetree: Add Richtek RT9455 bindings
of: Add vendor prefix for Richtek Technology Corporation
power_supply: 88pm860x_charger: Do not call free_irq() twice
power: bq24190_charger: Change first_time flag reset condition
power: axp288_charger: axp288 charger driver
power: max17042_battery: add HEALTH and TEMP_* properties support
power_supply: Add support for TI BQ25890 charger chip
...
Linus Torvalds [Tue, 23 Jun 2015 23:05:37 +0000 (16:05 -0700)]
Merge tag 'hsi-for-4.2' of git://git./linux/kernel/git/sre/linux-hsi
Pull HSI updates from Sebastian Reichel:
"Misc fixes"
* tag 'hsi-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
HSI: nokia-modem: use flags argument of devm_gpiod_get to set direction
HSI: nokia-modem: Reduce missing driver message to debug level
HSI: cmt_speech: fix timestamp interface
Linus Torvalds [Tue, 23 Jun 2015 22:55:44 +0000 (15:55 -0700)]
Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is the usual grab bag of driver updates (lpfc, hpsa,
megaraid_sas, cxgbi, be2iscsi) plus an assortment of minor updates.
There is also one new driver: the Cisco snic. The advansys driver has
been rewritten to get rid of the warning about converting it to the
DMA API, the tape statistics patch got in and finally, there's a
resuffle of SCSI header files to separate more cleanly initiator from
target mode (and better share the common definitions)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (156 commits)
snic: driver for Cisco SCSI HBA
qla2xxx: Fix indentation
qla2xxx: Comment out unreachable code
fusion: remove dead MTRR code
advansys: fix compilation errors and warnings when CONFIG_PCI is not set
mptsas: fix depth param in scsi_track_queue_full
megaraid: fix irq setup process regression
lpfc: Update version to 10.7.0.0 for upstream patch set.
lpfc: Fix to drop PLOGIs from fabric node till LOGO processing completes
lpfc: Fix scsi task management error message.
lpfc: Fix cq_id masking problem.
lpfc: Fix scsi prep dma buf error.
lpfc: Add support for using block multi-queue
lpfc: Devices are not discovered during takeaway/giveback testing
lpfc: Fix vport deletion failure.
lpfc: Check for active portpeerbeacon.
lpfc: Update driver version for upstream patch set 10.6.0.1.
lpfc: Change buffer pool empty message to miscellaneous category
lpfc: Fix incorrect log message reported for empty FCF record.
lpfc: Fix rport leak.
...
Linus Torvalds [Tue, 23 Jun 2015 22:53:26 +0000 (15:53 -0700)]
Merge tag 'for-linus' of git://git./linux/kernel/git/dledford/rdma
Pull rdma updates from Doug Ledford:
- a large cleanup of how device capabilities are checked for various
features
- additional cleanups in the MAD processing
- update to the srp driver
- creation and use of centralized log message helpers
- add const to a number of args to calls and clean up call chain
- add support for extended cq create verb
- add support for timestamps on cq completion
- add support for processing OPA MAD packets
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (92 commits)
IB/mad: Add final OPA MAD processing
IB/mad: Add partial Intel OPA MAD support
IB/mad: Add partial Intel OPA MAD support
IB/core: Add OPA MAD core capability flag
IB/mad: Add support for additional MAD info to/from drivers
IB/mad: Convert allocations from kmem_cache to kzalloc
IB/core: Add ability for drivers to report an alternate MAD size.
IB/mad: Support alternate Base Versions when creating MADs
IB/mad: Create a generic helper for DR forwarding checks
IB/mad: Create a generic helper for DR SMP Recv processing
IB/mad: Create a generic helper for DR SMP Send processing
IB/mad: Split IB SMI handling from MAD Recv handler
IB/mad cleanup: Generalize processing of MAD data
IB/mad cleanup: Clean up function params -- find_mad_agent
IB/mlx4: Add support for CQ time-stamping
IB/mlx4: Add mmap call to map the hardware clock
IB/core: Pass hardware specific data in query_device
IB/core: Add timestamp_mask and hca_core_clock to query_device
IB/core: Extend ib_uverbs_create_cq
IB/core: Add CQ creation time-stamping flag
...
Linus Torvalds [Tue, 23 Jun 2015 22:50:46 +0000 (15:50 -0700)]
Merge branch 'for-linus-clk' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull clkdev updates from Russell King:
"This series addresses some breakage in clkdev caused by a previous
patch set from the clk tree which introduced per-user clk structures.
This basically renamed the existing 'struct clk' to 'struct clk_hw',
and introduced a new 'struct clk'.
This change will break anyone using clk_add_alias() with the common
clk code enabled. Thankfully, the intersection of users of
clk_add_alias() and those using the common clk code is practically
zero, but this is something which should be fixed to keep the code
sane.
The problem is that clk_add_alias() does this:
r = clk_get(...);
l = clkdev_alloc(r, ...);
clk_put(...);
which causes the alias to store a pointer to 'r', which has been
freed.
The original patch set tried to work around this problem incorrectly -
at clk_get() time, it tried to convert the struct clk to a struct
clk_hw, and then creating a new struct clk from that. Clearly, if the
original struct clk has been freed, then we have a use-after-free bug.
We have other places in the tree which do something similar, so this
series also addresses those locations too.
This series addresses this problem by converting clkdev to store and
use the clk_hw pointer. This allows clk_get() to only have to create
it's per-user struct clk from the clk_hw. We can also get to the
desired clk_hw at clk_add_alias() or clk lookup creation time, when
the struct clk is "alive".
We also perform some cleanups of the code:
- replacing looped calls to clkdev_add() with clkdev_add_table()
- replacing open-coded lookup allocation (which should have been
using clkdev_alloc()) and subsequent clkdev_add() with
clkdev_create()
- replacing open-coded clk_add_alias() with clk_add_alias()"
* 'for-linus-clk' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
clk: s2mps11: use clkdev_create()
ASoC: migor: use clkdev_create()
ARM: omap2: use clkdev_add_alias()
ARM: omap2: use clkdev_create()
ARM: orion: use clkdev_create()
ARM: lpc32xx: convert to use clkdev_add_table()
SH: use clkdev_add_table()
clkdev: add clkdev_create() helper
clkdev: const-ify connection id to clk_add_alias()
clkdev: get rid of redundant clk_add_alias() prototype in linux/clk.h
clkdev: drop __init from clkdev_add_table()
clk: update clk API documentation to clarify clk_round_rate()
clkdev: use clk_hw internally
Linus Torvalds [Tue, 23 Jun 2015 21:18:07 +0000 (14:18 -0700)]
Merge tag 'pm+acpi-4.2-rc1' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management and ACPI updates from Rafael Wysocki:
"The rework of backlight interface selection API from Hans de Goede
stands out from the number of commits and the number of affected
places perspective. The cpufreq core fixes from Viresh Kumar are
quite significant too as far as the number of commits goes and because
they should reduce CPU online/offline overhead quite a bit in the
majority of cases.
From the new featues point of view, the ACPICA update (to upstream
revision
20150515) adding support for new ACPI 6 material to ACPICA is
the one that matters the most as some new significant features will be
based on it going forward. Also included is an update of the ACPI
device power management core to follow ACPI 6 (which in turn reflects
the Windows' device PM implementation), a PM core extension to support
wakeup interrupts in a more generic way and support for the ACPI _CCA
device configuration object.
The rest is mostly fixes and cleanups all over and some documentation
updates, including new DT bindings for Operating Performance Points.
There is one fix for a regression introduced in the 4.1 cycle, but it
adds quite a number of lines of code, it wasn't really ready before
Thursday and you were on vacation, so I refrained from pushing it on
the last minute for 4.1.
Specifics:
- ACPICA update to upstream revision
20150515 including basic support
for ACPI 6 features: new ACPI tables introduced by ACPI 6 (STAO,
XENV, WPBT, NFIT, IORT), changes related to the other tables (DTRM,
FADT, LPIT, MADT), new predefined names (_BTH, _CR3, _DSD, _LPI,
_MTL, _PRR, _RDI, _RST, _TFP, _TSN), fixes and cleanups (Bob Moore,
Lv Zheng).
- ACPI device power management core code update to follow ACPI 6
which reflects the ACPI device power management implementation in
Windows (Rafael J Wysocki).
- rework of the backlight interface selection logic to reduce the
number of kernel command line options and improve the handling of
DMI quirks that may be involved in that and to make the code
generally more straightforward (Hans de Goede).
- fixes for the ACPI Embedded Controller (EC) driver related to the
handling of EC transactions (Lv Zheng).
- fix for a regression related to the ACPI resources management and
resulting from a recent change of ACPI initialization code ordering
(Rafael J Wysocki).
- fix for a system initialization regression related to ACPI
introduced during the 3.14 cycle and caused by running the code
that switches the platform over to the ACPI mode too early in the
initialization sequence (Rafael J Wysocki).
- support for the ACPI _CCA device configuration object related to
DMA cache coherence (Suravee Suthikulpanit).
- ACPI/APEI fixes and cleanups (Jiri Kosina, Borislav Petkov).
- ACPI battery driver cleanups (Luis Henriques, Mathias Krause).
- ACPI processor driver cleanups (Hanjun Guo).
- cleanups and documentation update related to the ACPI device
properties interface based on _DSD (Rafael J Wysocki).
- ACPI device power management fixes (Rafael J Wysocki).
- assorted cleanups related to ACPI (Dominik Brodowski, Fabian
Frederick, Lorenzo Pieralisi, Mathias Krause, Rafael J Wysocki).
- fix for a long-standing issue causing General Protection Faults to
be generated occasionally on return to user space after resume from
ACPI-based suspend-to-RAM on 32-bit x86 (Ingo Molnar).
- fix to make the suspend core code return -EBUSY consistently in all
cases when system suspend is aborted due to wakeup detection (Ruchi
Kandoi).
- support for automated device wakeup IRQ handling allowing drivers
to make their PM support more starightforward (Tony Lindgren).
- new tracepoints for suspend-to-idle tracing and rework of the
prepare/complete callbacks tracing in the PM core (Todd E Brandt,
Rafael J Wysocki).
- wakeup sources framework enhancements (Jin Qian).
- new macro for noirq system PM callbacks (Grygorii Strashko).
- assorted cleanups related to system suspend (Rafael J Wysocki).
- cpuidle core cleanups to make the code more efficient (Rafael J
Wysocki).
- powernv/pseries cpuidle driver update (Shilpasri G Bhat).
- cpufreq core fixes related to CPU online/offline that should reduce
the overhead of these operations quite a bit, unless the CPU in
question is physically going away (Viresh Kumar, Saravana Kannan).
- serialization of cpufreq governor callbacks to avoid race
conditions in some cases (Viresh Kumar).
- intel_pstate driver fixes and cleanups (Doug Smythies, Prarit
Bhargava, Joe Konno).
- cpufreq driver (arm_big_little, cpufreq-dt, qoriq) updates (Sudeep
Holla, Felipe Balbi, Tang Yuantian).
- assorted cleanups in cpufreq drivers and core (Shailendra Verma,
Fabian Frederick, Wang Long).
- new Device Tree bindings for representing Operating Performance
Points (Viresh Kumar).
- updates for the common clock operations support code in the PM core
(Rajendra Nayak, Geert Uytterhoeven).
- PM domains core code update (Geert Uytterhoeven).
- Intel Knights Landing support for the RAPL (Running Average Power
Limit) power capping driver (Dasaratharaman Chandramouli).
- fixes related to the floor frequency setting on Atom SoCs in the
RAPL power capping driver (Ajay Thomas).
- runtime PM framework documentation update (Ben Dooks).
- cpupower tool fix (Herton R Krzesinski)"
* tag 'pm+acpi-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (194 commits)
cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state
x86: Load __USER_DS into DS/ES after resume
PM / OPP: Add binding for 'opp-suspend'
PM / OPP: Allow multiple OPP tables to be passed via DT
PM / OPP: Add new bindings to address shortcomings of existing bindings
ACPI: Constify ACPI device IDs in documentation
ACPI / enumeration: Document the rules regarding the PRP0001 device ID
ACPI / video: Make acpi_video_unregister_backlight() private
acpi-video-detect: Remove old API
toshiba-acpi: Port to new backlight interface selection API
thinkpad-acpi: Port to new backlight interface selection API
sony-laptop: Port to new backlight interface selection API
samsung-laptop: Port to new backlight interface selection API
msi-wmi: Port to new backlight interface selection API
msi-laptop: Port to new backlight interface selection API
intel-oaktrail: Port to new backlight interface selection API
ideapad-laptop: Port to new backlight interface selection API
fujitsu-laptop: Port to new backlight interface selection API
eeepc-laptop: Port to new backlight interface selection API
dell-wmi: Port to new backlight interface selection API
...
Linus Torvalds [Tue, 23 Jun 2015 21:08:54 +0000 (14:08 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
"As usual, mostly comment, kerneldoc and printk() fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
lpfc: Grammar s/an negative/a negative/
ARM: lib/lib1funcs.S: fix typo s/substractions/subtractions/
cx25821: cx25821-medusa-reg.h: fix 0x0x prefix
lib: crc-itu-t.[ch] fix 0x0x prefix in integer constants
rapidio: Fix kerneldoc and comment
qla4xxx: Fix printk() in qla4_83xx_read_reset_template() and qla4_83xx_pre_loopback_config()
treewide: Kconfig: fix wording / spelling
usb/serial: fix grammar in Kconfig help text for FTDI_SIO
megaraid_sas: fix kerneldoc
netfilter: ebtables: fix comment grammar
drm/radeon: fix comment
isdn: fix grammar in comment
ARM: KVM: fix comment
Linus Torvalds [Tue, 23 Jun 2015 21:07:26 +0000 (14:07 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/livepatching
Pull livepatching fixes from Jiri Kosina:
- symbol lookup locking fix, from Miroslav Benes
- error handling improvements in case of failure of the module coming
notifier, from Minfei Huang
- we were too pessimistic when kASLR has been enabled on x86 and were
dropping address hints on the floor unnecessarily in such case. Fix
from Jiri Kosina
- a few other small fixes and cleanups
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch: add module locking around kallsyms calls
livepatch: annotate klp_init() with __init
livepatch: introduce patch/func-walking helpers
livepatch: make kobject in klp_object statically allocated
livepatch: Prevent patch inconsistencies if the coming module notifier fails
livepatch: match return value to function signature
x86: kaslr: fix build due to missing ALIGN definition
livepatch: x86: make kASLR logic more accurate
x86: introduce kaslr_offset()
Linus Torvalds [Tue, 23 Jun 2015 21:05:52 +0000 (14:05 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina:
- spurious power/wakeup sysfs files removal for I2C-HID devices, from
Andrew Duggan
- Logitech M560 support, from Goffredo Baroncelli
- a lot of housekeeping cleanups to hid-lg4ff driver, from Michal Maly
- improved support for Plantronics devices, from Terry Junge
- Sony Motion Controller and Navigation Controller support and
subsequent cleanups of hid-sony driver, from Frank Praznik and Simon
Wood
- HW support improvements to the Wacom driver, from Jason Gerecke and
Ping Cheng
- assorted small cleanups and device ID additions all over the place
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (69 commits)
HID: cypress: use swap() in cp_report_fixup()
HID: microsoft: Add Surface Power Cover
HID: hid-sony: Fix report descriptor for Navigation Controller
HID: hid-sony: Navigation controller only has 1 LED and no rumble
HID: hid-sony: Add BT support for Navigation Controller
HID: wacom: Introduce new 'touch_input' device
HID: wacom: Split apart 'wacom_setup_pentouch_input_capabilites'
HID: wacom: Introduce a new WACOM_DEVICETYPE_PAD device_type
HID: wacom: Treat features->device_type values as flags
HID: wacom: Simplify 'wacom_update_name'
HID: rmi: Disable populating F30 when the touchpad has physical buttons
HID: plantronics: Update to map volume up/down controls
HID: sony: PS Move fix report descriptor
HID: sony: PS3 Move enable LEDs and Rumble via BT
HID: sony: Add support PS3 Move Battery via BT
HID: sony: Add quirk for MOTION_CONTROLLER_BT
HID: sony: Support PS3 Move Controller when connected via Bluetooth
HID: i2c-hid: Do not set the ACPI companion field in the HID device
usb, HID: Remove Vernier devices from lsusb and hid_ignore_list
HID: hidpp: Add driver for mouse logitech M560
...
Linus Torvalds [Tue, 23 Jun 2015 21:04:00 +0000 (14:04 -0700)]
Merge git://git./linux/kernel/git/brodo/pcmcia
Pull PCMCIA update from Dominik Brodowski:
"A few PCMCIA fixes and cleanups are available in the PCMCIA tree.
Most of them are trivial and self-explanatory. Of particular note are
the last three patches which add an important hardware quirk for
Toshiba ToPIC95 sockets (or BIOS breakage on systems with these
sockets), fix resource leaks in yenta_socket enable/disable call
paths, and fix a regression caused by patch
1c6c9b1d9d25 since v4.0.
Alan stated he is OK with me pushing this patch upstream. Once it
works out well in your tree, I will push it to stable for 4.0/4.1 as
well"
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia:
pcmcia: do not break rsrc_nonstatic when handling anonymous cards
pcmcia: Fix resource leaks in yenta_probe() and _close()
Disable write buffering on Toshiba ToPIC95
pcmcia: Convert dev_printk to dev_<level>
pcmcia/vrc4171: Remove typedefs for enums and struct
pcmcia: Remove typedef in structs and emum
pcmcia: Remove typedef tuple_flags
drivers: pcmcia: electra_cf.c fix checkpatch error and warnings
drivers: pcmcia: ds.c fix checkpatch errors
PCMCIA: Remove commented references to dead class_device_create_file()
drivers/pcmcia/electra_cf.c: add missing iounmap and kfree
pcmcia: replace open-coded ARRAY_SIZE with macro
Linus Torvalds [Tue, 23 Jun 2015 20:41:24 +0000 (13:41 -0700)]
Merge tag 'pci-v4.2-changes' of git://git./linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"PCI changes for the v4.2 merge window:
Enumeration
- Move pci_ari_enabled() to global header (Alex Williamson)
- Account for ARI in _PRT lookups (Alex Williamson)
- Remove unused pci_scan_bus_parented() (Yijing Wang)
Resource management
- Use host bridge _CRS info on systems with >32 bit addressing (Bjorn Helgaas)
- Use host bridge _CRS info on Foxconn K8M890-8237A (Bjorn Helgaas)
- Fix pci_address_to_pio() conversion of CPU address to I/O port (Zhichang Yuan)
- Add pci_bus_addr_t (Yinghai Lu)
PCI device hotplug
- Wait for pciehp command completion where necessary (Alex Williamson)
- Drop pointless ACPI-based "slot detection" check (Rafael J. Wysocki)
- Check ignore_hotplug for all downstream devices (Rafael J. Wysocki)
- Propagate the "ignore hotplug" setting to parent (Rafael J. Wysocki)
- Inline pciehp "handle event" functions into the ISR (Bjorn Helgaas)
- Clean up pciehp debug logging (Bjorn Helgaas)
Power management
- Remove redundant PCIe port type checking (Yijing Wang)
- Add dev->has_secondary_link to track downstream PCIe links (Yijing Wang)
- Use dev->has_secondary_link to find downstream links for ASPM (Yijing Wang)
- Drop __pci_disable_link_state() useless "force" parameter (Bjorn Helgaas)
- Simplify Clock Power Management setting (Bjorn Helgaas)
Virtualization
- Add ACS quirks for Intel 9-series PCH root ports (Alex Williamson)
- Add function 1 DMA alias quirk for Marvell 9120 (Sakari Ailus)
MSI
- Disable MSI at enumeration even if kernel doesn't support MSI (Michael S. Tsirkin)
- Remove unused pci_msi_off() (Bjorn Helgaas)
- Rename msi_set_enable(), msix_clear_and_set_ctrl() (Michael S. Tsirkin)
- Export pci_msi_set_enable(), pci_msix_clear_and_set_ctrl() (Michael S. Tsirkin)
- Drop pci_msi_off() calls during probe (Michael S. Tsirkin)
APM X-Gene host bridge driver
- Add APM X-Gene v1 PCIe MSI/MSIX termination driver (Duc Dang)
- Add APM X-Gene PCIe MSI DTS nodes (Duc Dang)
- Disable Configuration Request Retry Status for v1 silicon (Duc Dang)
- Allow config access to Root Port even when link is down (Duc Dang)
Broadcom iProc host bridge driver
- Allow override of device tree IRQ mapping function (Hauke Mehrtens)
- Add BCMA PCIe driver (Hauke Mehrtens)
- Directly add PCI resources (Hauke Mehrtens)
- Free resource list after registration (Hauke Mehrtens)
Freescale i.MX6 host bridge driver
- Add speed change timeout message (Troy Kisky)
- Rename imx6_pcie_start_link() to imx6_pcie_establish_link() (Bjorn Helgaas)
Freescale Layerscape host bridge driver
- Use dw_pcie_link_up() consistently (Bjorn Helgaas)
- Factor out ls_pcie_establish_link() (Bjorn Helgaas)
Marvell MVEBU host bridge driver
- Remove mvebu_pcie_scan_bus() (Yijing Wang)
NVIDIA Tegra host bridge driver
- Remove tegra_pcie_scan_bus() (Yijing Wang)
Synopsys DesignWare host bridge driver
- Consolidate outbound iATU programming functions (Jisheng Zhang)
- Use iATU0 for cfg and IO, iATU1 for MEM (Jisheng Zhang)
- Add support for x8 links (Zhou Wang)
- Wait for link to come up with consistent style (Bjorn Helgaas)
- Use pci_scan_root_bus() for simplicity (Yijing Wang)
TI DRA7xx host bridge driver
- Use dw_pcie_link_up() consistently (Bjorn Helgaas)
Miscellaneous
- Include <linux/pci.h>, not <asm/pci.h> (Bjorn Helgaas)
- Remove unnecessary #includes of <asm/pci.h> (Bjorn Helgaas)
- Remove unused pcibios_select_root() (again) (Bjorn Helgaas)
- Remove unused pci_dma_burst_advice() (Bjorn Helgaas)
- xen/pcifront: Don't use deprecated function pci_scan_bus_parented() (Arnd Bergmann)"
* tag 'pci-v4.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (58 commits)
PCI: pciehp: Inline the "handle event" functions into the ISR
PCI: pciehp: Rename queue_interrupt_event() to pciehp_queue_interrupt_event()
PCI: pciehp: Make queue_interrupt_event() void
PCI: xgene: Allow config access to Root Port even when link is down
PCI: xgene: Disable Configuration Request Retry Status for v1 silicon
PCI: pciehp: Clean up debug logging
x86/PCI: Use host bridge _CRS info on systems with >32 bit addressing
PCI: imx6: Add #define PCIE_RC_LCSR
PCI: imx6: Use "u32", not "uint32_t"
PCI: Remove unused pci_scan_bus_parented()
xen/pcifront: Don't use deprecated function pci_scan_bus_parented()
PCI: imx6: Add speed change timeout message
PCI/ASPM: Simplify Clock Power Management setting
PCI: designware: Wait for link to come up with consistent style
PCI: layerscape: Factor out ls_pcie_establish_link()
PCI: layerscape: Use dw_pcie_link_up() consistently
PCI: dra7xx: Use dw_pcie_link_up() consistently
x86/PCI: Use host bridge _CRS info on Foxconn K8M890-8237A
PCI: pciehp: Wait for hotplug command completion where necessary
PCI: Remove unused pci_dma_burst_advice()
...
Linus Torvalds [Tue, 23 Jun 2015 20:39:56 +0000 (13:39 -0700)]
Merge tag 'hwmon-for-linus-v4.2' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
- new driver for Microchip TC74
- support for ncpXXwf104 added to ntc_thermistor driver
- minor cleanup
* tag 'hwmon-for-linus-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: add driver for Microchip TC74
hwmon: (ntc_thermistor) Improve precision of resistance calculation
hwmon: (ntc_thermistor) fix iio raw to microvolts conversion
hwmon: (atxp1) Drop auto-detection
hwmon: (atxp1) Drop FSF mailing address
hwmon: Allow compile test of GPIO consumers if !GPIOLIB
hwmon: (sht15) Constify platform_device_id
hwmon: (max197) Constify platform_device_id
hwmon: (ntc_thermistor) Add support for ncpXXwf104
Linus Torvalds [Tue, 23 Jun 2015 20:38:04 +0000 (13:38 -0700)]
Merge tag 'mmc-v4.2' of git://git.linaro.org/people/ulf.hansson/mmc
Pull MMC updates from Ulf Hansson:
"Here are the changes for MMC for v4.2.
MMC core:
- Fix an error path in the mmc block layer
- Fix PM domain attachment for the SDIO bus
- Add support for driver strength selection
- Increase a delay to let voltage stabilize
- Add support for disabling write-protect detection
- Add facility to support re-tuning
- Re-tune and retry in the recovery path
- Add reset option for SDIO
- Consolidations and clean-ups
MMC host:
- Add Mediatek MMC driver
- Constify platform_device_id for a couple of hosts
- Fix modalias to make module auto-loading work for a couple of hosts
- sdhci: Add support for sdhci-arasan4.9a
- sdhci: Fix low memory corruption
- sdhci: Restore behavior while creating OCR mask
- sdhci: Add a callback to select drive strength
- sdhci: Fix driver type B and D handling
- sdhci: Add support for drive strength selection for SPT
- sdhci: Enable HS400 for some Intel host controllers
- sdhci: Convert to use the new re-tuning facility
- sdhci: Various minor fixes and clean-ups
- dw_mmc: Add support for hi6220
- dw_mmc: Use core to handle absent write protect line
- dw_mmc: Add support to switch voltage
- tmio: Some fixes and modernizations
- sh_mmcif: Improve clock rate calculation"
* tag 'mmc-v4.2' of git://git.linaro.org/people/ulf.hansson/mmc: (98 commits)
mmc: queue: prevent soft lockups on PREEMPT=n
mmc: mediatek: Add PM support for MMC driver
mmc: mediatek: Add Mediatek MMC driver
mmc: dt-bindings: add Mediatek MMC bindings
mmc: card: Fixup request missing in mmc_blk_issue_rw_rq
mmc: sdhci: fix low memory corruption
mmc: sdhci-pci: Change AMD SDHCI quirk application scope
i2c-piix4: Use Macro for AMD CZ SMBus device ID
pci_ids: Add AMD KERNCZ device ID support
mmc: queue: use swap() in mmc_queue_thread()
mmc: dw_mmc: insmod followed by rmmod will hung for eMMC
mmc: sdhci: Restore behavior while creating OCR mask
mmc: sdhci-pxav3: fix device wakeup initialization
mmc: core: Attach PM domain prior probing of SDIO func driver
mmc: core: Remove redundant ->power_restore() callback for SD
mmc: core: Remove redundant ->power_restore() callback for MMC
mmc: sdhci-bcm2835: Actually enable the clock
mmc: sdhci-bcm2835: Clean up platform allocations if sdhci init fails.
mmc: sdhci-of-esdhc: enable interrupt mode to detect card
mmc: sdhci-esdhc-imx: add quirk SDHCI_QUIRK2_BROKEN_HS200 for imx6qdl
...
Linus Torvalds [Tue, 23 Jun 2015 20:34:02 +0000 (13:34 -0700)]
Merge tag 'gpio-v4.2-1' of git://git./linux/kernel/git/linusw/linux-gpio
Pull gpio updates from Linus Walleij:
"This is the big bulk of GPIO changes queued for the v4.2 kernel
series:
- a big set of cleanups to the aged sysfs interface from Johan
Hovold. To get these in, v4.1-rc3 was merged into the tree as the
first patch in that series had to go into stable. This makes the
locking much more fine-grained (get rid of the "big GPIO lock(s)"
and store states in the GPIO descriptors.
- rename gpiod_[g|s]et_array() to gpiod_[g|s]et_array_value() to
avoid confusions.
- New drivers for:
* NXP LPC18xx (currently LPC1850)
* NetLogic XLP
* Broadcom STB SoC's
* Axis ETRAXFS
* Zynq Ultrascale+ (subdriver)
- ACPI:
* make it possible to retrieve GpioInt resources from a GPIO
device using acpi_dev_gpio_irq_get()
* merge some dependent I2C changes exploiting this.
* support the ARM X-Gene GPIO standby driver.
- make it possible for the generic GPIO driver to read back the value
set registers to reflect current status.
- loads of OMAP IRQ handling fixes.
- incremental improvements to Kona, max732x, OMAP, MXC, RCAR,
PCA953x, STP-XWAY, PCF857x, Crystalcove, TB10x.
- janitorial (constification, checkpatch cleanups)"
* tag 'gpio-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (71 commits)
gpio: Fix checkpatch.pl issues
gpio: pcf857x: handle only enabled irqs
gpio / ACPI: Return -EPROBE_DEFER if the gpiochip was not found
GPIO / ACPI: export acpi_gpiochip_request(free)_interrupts for module use
gpio: improve error reporting on own descriptors
gpio: promote own request failure to pr_err()
gpio: Added support to Zynq Ultrascale+ MPSoC
gpio: add ETRAXFS GPIO driver
fix documentation after renaming gpiod_set_array to gpiod_set_array_value
gpio: Add GPIO support for Broadcom STB SoCs
gpio: xgene: add ACPI support for APM X-Gene GPIO standby driver
gpio: tb10x: Drop unneeded free_irq() call
gpio: crystalcove: set IRQCHIP_SKIP_SET_WAKE for the irqchip
gpio: stp-xway: Use the of_property_read_u32 helper
gpio: pcf857x: Check for irq_set_irq_wake() failures
gpio-stp-xway: Fix enabling the highest bit of the PHY LEDs
gpio: Prevent an integer overflow in the pca953x driver
gpio: omap: rework omap_gpio_irq_startup to handle current pin state properly
gpio: omap: rework omap_gpio_request to touch only gpio specific registers
gpio: omap: rework omap_x_irq_shutdown to touch only irqs specific registers
...
Linus Torvalds [Tue, 23 Jun 2015 20:32:38 +0000 (13:32 -0700)]
Merge tag 'pwm/for-4.2-rc1' of git://git./linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This has a couple of fixes for Atmel, Samsung and Broadcom drivers.
Some preparatory patches for more upcoming Intel work is included as
well"
* tag 'pwm/for-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: lpss: pci: Add support for Broxton platform
pwm: bcm-kona: Don't set polarity in probe
pwm: Add pwmchip_add_with_polarity() API
pwm: atmel: Fix incorrect CDTY value after disabling
pwm: atmel: Fix incorrect CDTY value after enabling
pwm: samsung: Use MODULE_DEVICE_TABLE() to include OF modalias
pwm: Add support to remove registered consumer lookup tables
Jens Freimann [Mon, 22 Jun 2015 11:20:12 +0000 (13:20 +0200)]
KVM: s390: clear floating interrupt bitmap and parameters
commit
6d3da24141 ("KVM: s390: deliver floating interrupts in order
of priority") introduced a regression for the reset handling.
We don't clear the bitmap of pending floating interrupts
and interrupt parameters. This could result in stale interrupts
even after a reset. Let's fix this by clearing the pending bitmap
and the parameters for service and machine check interrupts.
Cc: stable@vger.kernel.org # 4.1
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wei Huang [Fri, 12 Jun 2015 05:34:56 +0000 (01:34 -0400)]
KVM: x86/vPMU: Enable PMU handling for AMD PERFCTRn and EVNTSELn MSRs
This patch enables AMD guest VM to access (R/W) PMU related MSRs, which
include PERFCTR[0..3] and EVNTSEL[0..3].
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wei Huang <wei@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wei Huang [Fri, 12 Jun 2015 05:34:55 +0000 (01:34 -0400)]
KVM: x86/vPMU: Implement AMD vPMU code for KVM
This patch replaces the empty AMD vPMU functions (in pmu_amd.c) with real
implementation.
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Wei Huang <wei@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wei Huang [Fri, 19 Jun 2015 13:45:05 +0000 (15:45 +0200)]
KVM: x86/vPMU: Define kvm_pmu_ops to support vPMU function dispatch
This patch defines a new function pointer struct (kvm_pmu_ops) to
support vPMU for both Intel and AMD. The functions pointers defined in
this new struct will be linked with Intel and AMD functions later. In the
meanwhile the struct that maps from event_sel bits to PERF_TYPE_HARDWARE
events is renamed and moved from Intel specific code to kvm_host.h as a
common struct.
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Wei Huang <wei@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wei Huang [Fri, 19 Jun 2015 14:16:59 +0000 (16:16 +0200)]
KVM: x86/vPMU: introduce kvm_pmu_msr_idx_to_pmc
This function will be part of the kvm_pmu_ops interface. Introduce
it already.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Tue, 23 Jun 2015 04:04:48 +0000 (21:04 -0700)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"Here is the crypto update for 4.2:
API:
- Convert RNG interface to new style.
- New AEAD interface with one SG list for AD and plain/cipher text.
All external AEAD users have been converted.
- New asymmetric key interface (akcipher).
Algorithms:
- Chacha20, Poly1305 and RFC7539 support.
- New RSA implementation.
- Jitter RNG.
- DRBG is now seeded with both /dev/random and Jitter RNG. If kernel
pool isn't ready then DRBG will be reseeded when it is.
- DRBG is now the default crypto API RNG, replacing krng.
- 842 compression (previously part of powerpc nx driver).
Drivers:
- Accelerated SHA-512 for arm64.
- New Marvell CESA driver that supports DMA and more algorithms.
- Updated powerpc nx 842 support.
- Added support for SEC1 hardware to talitos"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (292 commits)
crypto: marvell/cesa - remove COMPILE_TEST dependency
crypto: algif_aead - Temporarily disable all AEAD algorithms
crypto: af_alg - Forbid the use internal algorithms
crypto: echainiv - Only hold RNG during initialisation
crypto: seqiv - Add compatibility support without RNG
crypto: eseqiv - Offer normal cipher functionality without RNG
crypto: chainiv - Offer normal cipher functionality without RNG
crypto: user - Add CRYPTO_MSG_DELRNG
crypto: user - Move cryptouser.h to uapi
crypto: rng - Do not free default RNG when it becomes unused
crypto: skcipher - Allow givencrypt to be NULL
crypto: sahara - propagate the error on clk_disable_unprepare() failure
crypto: rsa - fix invalid select for AKCIPHER
crypto: picoxcell - Update to the current clk API
crypto: nx - Check for bogus firmware properties
crypto: marvell/cesa - add DT bindings documentation
crypto: marvell/cesa - add support for Kirkwood and Dove SoCs
crypto: marvell/cesa - add support for Orion SoCs
crypto: marvell/cesa - add allhwsupport module parameter
crypto: marvell/cesa - add support for all armada SoCs
...
Linus Torvalds [Tue, 23 Jun 2015 03:33:38 +0000 (20:33 -0700)]
Merge tag 'please-pull-paravirt' of git://git./linux/kernel/git/aegl/linux
Pull ia64 paravirt removal from Tony Luck:
"Nobody cares about paravirtualization on ia64 anymore"
* tag 'please-pull-paravirt' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
ia64: remove paravirt code
Linus Torvalds [Tue, 23 Jun 2015 03:32:50 +0000 (20:32 -0700)]
Merge branch 'for-4.2' of git://git./linux/kernel/git/geert/linux-m68k
Pull m68k update from Geert Uytterhoeven.
* 'for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Use for_each_sg()
m68k/defconfig: Update defconfigs for v4.1-rc6
Linus Torvalds [Tue, 23 Jun 2015 02:42:56 +0000 (19:42 -0700)]
Merge branch 'irq-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"The irq departement delivers:
- plug a potential race related to chained interrupt handlers
- core updates which address the needs of the x86 irqdomain conversion
- new irqchip callback to support affinity settings for VCPUs
- the usual pile of updates to interrupt chip drivers
- a few helper functions to allow further cleanups and
simplifications
I have a largish pile of coccinelle scripted/verified cleanups and
simplifications pending on top of that, but I prefer to send that
towards the end of the merge window when the arch/driver changes have
hit your tree to avoid API change wreckage as far as possible"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
genirq: Remove bogus restriction in irq_move_mask_irq()
irqchip: atmel-aic5: Add sama5d2 support
irq: spear-shirq: Fix race in installing chained IRQ handler
irq: irq-keystone: Fix race in installing chained IRQ handler
gpio: gpio-tegra: Fix race in installing chained IRQ handler
gpio: gpio-mxs: Fix race in installing chained IRQ handler
gpio: gpio-mxc: Fix race in installing chained IRQ handler
ARM: gemini: Fix race in installing GPIO chained IRQ handler
GPU: ipu: Fix race in installing IPU chained IRQ handler
ARM: sa1100: convert SA11x0 related code to use new chained handler helper
irq: Add irq_set_chained_handler_and_data()
irqchip: exynos-combiner: Save IRQ enable set on suspend
genirq: Introduce helper function irq_data_get_affinity_mask()
genirq: Introduce helper function irq_data_get_node()
genirq: Introduce struct irq_common_data to host shared irq data
genirq: Prevent crash in irq_move_irq()
genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain
irqchip: gic: Simplify gic_configure_irq by using IRQCHIP_SET_TYPE_MASKED
irqchip: renesas: intc-irqpin: Improve binding documentation
genirq: Set IRQCHIP_SKIP_SET_WAKE for no_irq_chip
...
Linus Torvalds [Tue, 23 Jun 2015 02:20:04 +0000 (19:20 -0700)]
Merge branch 'timers-nohz-for-linus' of git://git./linux/kernel/git/tip/tip
Pull NOHZ updates from Thomas Gleixner:
"A few updates to the nohz infrastructure:
- recursion protection for context tracking
- make the TIF_NOHZ inheritance smarter
- isolate cpus which belong to the NOHZ full set"
* 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
nohz: Set isolcpus when nohz_full is set
nohz: Add tick_nohz_full_add_cpus_to() API
context_tracking: Inherit TIF_NOHZ through forks instead of context switches
context_tracking: Protect against recursion
Linus Torvalds [Tue, 23 Jun 2015 01:57:44 +0000 (18:57 -0700)]
Merge branch 'timers-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A rather largish update for everything time and timer related:
- Cache footprint optimizations for both hrtimers and timer wheel
- Lower the NOHZ impact on systems which have NOHZ or timer migration
disabled at runtime.
- Optimize run time overhead of hrtimer interrupt by making the clock
offset updates smarter
- hrtimer cleanups and removal of restrictions to tackle some
problems in sched/perf
- Some more leap second tweaks
- Another round of changes addressing the 2038 problem
- First step to change the internals of clock event devices by
introducing the necessary infrastructure
- Allow constant folding for usecs/msecs_to_jiffies()
- The usual pile of clockevent/clocksource driver updates
The hrtimer changes contain updates to sched, perf and x86 as they
depend on them plus changes all over the tree to cleanup API changes
and redundant code, which got copied all over the place. The y2038
changes touch s390 to remove the last non 2038 safe code related to
boot/persistant clock"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
clocksource: Increase dependencies of timer-stm32 to limit build wreckage
timer: Minimize nohz off overhead
timer: Reduce timer migration overhead if disabled
timer: Stats: Simplify the flags handling
timer: Replace timer base by a cpu index
timer: Use hlist for the timer wheel hash buckets
timer: Remove FIFO "guarantee"
timers: Sanitize catchup_timer_jiffies() usage
hrtimer: Allow hrtimer::function() to free the timer
seqcount: Introduce raw_write_seqcount_barrier()
seqcount: Rename write_seqcount_barrier()
hrtimer: Fix hrtimer_is_queued() hole
hrtimer: Remove HRTIMER_STATE_MIGRATE
selftest: Timers: Avoid signal deadlock in leap-a-day
timekeeping: Copy the shadow-timekeeper over the real timekeeper last
clockevents: Check state instead of mode in suspend/resume path
selftests: timers: Add leap-second timer edge testing to leap-a-day.c
ntp: Do leapsecond adjustment in adjtimex read path
time: Prevent early expiry of hrtimers[CLOCK_REALTIME] at the leap second edge
ntp: Introduce and use SECS_PER_DAY macro instead of 86400
...
Linus Torvalds [Tue, 23 Jun 2015 00:59:09 +0000 (17:59 -0700)]
Merge branch 'x86-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 core updates from Ingo Molnar:
"There were so many changes in the x86/asm, x86/apic and x86/mm topics
in this cycle that the topical separation of -tip broke down somewhat -
so the result is a more traditional architecture pull request,
collected into the 'x86/core' topic.
The topics were still maintained separately as far as possible, so
bisectability and conceptual separation should still be pretty good -
but there were a handful of merge points to avoid excessive
dependencies (and conflicts) that would have been poorly tested in the
end.
The next cycle will hopefully be much more quiet (or at least will
have fewer dependencies).
The main changes in this cycle were:
* x86/apic changes, with related IRQ core changes: (Jiang Liu, Thomas
Gleixner)
- This is the second and most intrusive part of changes to the x86
interrupt handling - full conversion to hierarchical interrupt
domains:
[IOAPIC domain] -----
|
[MSI domain] --------[Remapping domain] ----- [ Vector domain ]
| (optional) |
[HPET MSI domain] ----- |
|
[DMAR domain] -----------------------------
|
[Legacy domain] -----------------------------
This now reflects the actual hardware and allowed us to distangle
the domain specific code from the underlying parent domain, which
can be optional in the case of interrupt remapping. It's a clear
separation of functionality and removes quite some duct tape
constructs which plugged the remap code between ioapic/msi/hpet
and the vector management.
- Intel IOMMU IRQ remapping enhancements, to allow direct interrupt
injection into guests (Feng Wu)
* x86/asm changes:
- Tons of cleanups and small speedups, micro-optimizations. This
is in preparation to move a good chunk of the low level entry
code from assembly to C code (Denys Vlasenko, Andy Lutomirski,
Brian Gerst)
- Moved all system entry related code to a new home under
arch/x86/entry/ (Ingo Molnar)
- Removal of the fragile and ugly CFI dwarf debuginfo annotations.
Conversion to C will reintroduce many of them - but meanwhile
they are only getting in the way, and the upstream kernel does
not rely on them (Ingo Molnar)
- NOP handling refinements. (Borislav Petkov)
* x86/mm changes:
- Big PAT and MTRR rework: making the code more robust and
preparing to phase out exposing direct MTRR interfaces to drivers -
in favor of using PAT driven interfaces (Toshi Kani, Luis R
Rodriguez, Borislav Petkov)
- New ioremap_wt()/set_memory_wt() interfaces to support
Write-Through cached memory mappings. This is especially
important for good performance on NVDIMM hardware (Toshi Kani)
* x86/ras changes:
- Add support for deferred errors on AMD (Aravind Gopalakrishnan)
This is an important RAS feature which adds hardware support for
poisoned data. That means roughly that the hardware marks data
which it has detected as corrupted but wasn't able to correct, as
poisoned data and raises an APIC interrupt to signal that in the
form of a deferred error. It is the OS's responsibility then to
take proper recovery action and thus prolonge system lifetime as
far as possible.
- Add support for Intel "Local MCE"s: upcoming CPUs will support
CPU-local MCE interrupts, as opposed to the traditional system-
wide broadcasted MCE interrupts (Ashok Raj)
- Misc cleanups (Borislav Petkov)
* x86/platform changes:
- Intel Atom SoC updates
... and lots of other cleanups, fixlets and other changes - see the
shortlog and the Git log for details"
* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (222 commits)
x86/hpet: Use proper hpet device number for MSI allocation
x86/hpet: Check for irq==0 when allocating hpet MSI interrupts
x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabled
x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled
x86/platform/intel/baytrail: Add comments about why we disabled HPET on Baytrail
genirq: Prevent crash in irq_move_irq()
genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain
iommu, x86: Properly handle posted interrupts for IOMMU hotplug
iommu, x86: Provide irq_remapping_cap() interface
iommu, x86: Setup Posted-Interrupts capability for Intel iommu
iommu, x86: Add cap_pi_support() to detect VT-d PI capability
iommu, x86: Avoid migrating VT-d posted interrupts
iommu, x86: Save the mode (posted or remapped) of an IRTE
iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip
iommu: dmar: Provide helper to copy shared irte fields
iommu: dmar: Extend struct irte for VT-d Posted-Interrupts
iommu: Add new member capability to struct irq_remap_ops
x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode code
x86/asm/entry/32: Shorten __audit_syscall_entry() args preparation
x86/asm/entry/32: Explain reloading of registers after __audit_syscall_entry()
...
Linus Torvalds [Tue, 23 Jun 2015 00:51:59 +0000 (17:51 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 warning fixlet from Ingo Molnar:
"A build fix for certain (rare) variants of binutils that did not make
it into v4.1"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Fix overflow warning with 32-bit binutils
Linus Torvalds [Tue, 23 Jun 2015 00:46:14 +0000 (17:46 -0700)]
Merge branch 'x86-microcode-for-linus' of git://git./linux/kernel/git/tip/tip
Pul x86 microcode updates from Ingo Molnar:
"x86 microcode loader updates from Borislav Petkov:
- early parsing of the built-in microcode
- cleanups
- misc smaller fixes"
* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Correct CPU family related variable types
x86/microcode: Disable builtin microcode loading on 32-bit for now
x86/microcode/intel: Rename get_matching_sig()
x86/microcode/intel: Simplify get_matching_sig()
x86/microcode/intel: Simplify update_match_cpu()
x86/microcode/intel: Rename get_matching_microcode
x86/cpu/microcode: Zap changelog
x86/microcode: Parse built-in microcode early
x86/microcode/intel: Remove unused @rev arg of get_matching_sig()
x86/microcode/intel: Get rid of revision_is_newer()
Linus Torvalds [Tue, 23 Jun 2015 00:40:55 +0000 (17:40 -0700)]
Merge branch 'x86-kdump-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 kdump updates from Ingo Molnar:
"Three kdump robustness related improvements (Joerg Roedel)"
* 'x86-kdump-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/crash: Allocate enough low memory when crashkernel=high
x86/swiotlb: Try coherent allocations with __GFP_NOWARN
swiotlb: Warn on allocation failure in swiotlb_alloc_coherent()
Uwe Kleine-König [Mon, 8 Jun 2015 09:53:45 +0000 (11:53 +0200)]
HSI: nokia-modem: use flags argument of devm_gpiod_get to set direction
Since
39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions)
which appeared in v3.17-rc1, the gpiod_get* functions take an additional
parameter that allows to specify direction and initial value for output.
Use this to simplify the driver. Furthermore this is one caller less
that stops us making the flags argument to gpiod_get*() mandatory.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Sebastian Reichel [Mon, 4 May 2015 13:51:36 +0000 (15:51 +0200)]
HSI: nokia-modem: Reduce missing driver message to debug level
Reduce message priority from dev_err to dev_dbg for missing cmt-speech
or ssi-protocol drivers, since they will be probed again and it may
result in spamming the boot log.
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Sebastian Reichel [Thu, 16 Apr 2015 17:05:18 +0000 (19:05 +0200)]
HSI: cmt_speech: fix timestamp interface
The user interface for timestamps in the new cmt_speech
driver is broken in multiple ways:
- The layout is incompatible between 32-bit and 64-bit user
space, because of the size differences in 'struct timespec'.
This means that the driver can not work when used with 32-bit
user space on a 64-bit kernel.
- As there are plans to change 32-bit user space to use
a 64-bit time_t type in the future, it will also be
incompatible with new 32-bit user space.
- It is using ktime_get_ts under it's deprecated alias
(do_posix_clock_monotonic_gettime).
To keep support for the user space tools written for this driver (which
have lived many years out-of-tree), the interface has been hardened to
unsigned 32-bit values.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Linus Torvalds [Tue, 23 Jun 2015 00:16:11 +0000 (17:16 -0700)]
Merge branch 'x86-fpu-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 FPU updates from Ingo Molnar:
"This tree contains two main changes:
- The big FPU code rewrite: wide reaching cleanups and reorganization
that pulls all the FPU code together into a clean base in
arch/x86/fpu/.
The resulting code is leaner and faster, and much easier to
understand. This enables future work to further simplify the FPU
code (such as removing lazy FPU restores).
By its nature these changes have a substantial regression risk: FPU
code related bugs are long lived, because races are often subtle
and bugs mask as user-space failures that are difficult to track
back to kernel side backs. I'm aware of no unfixed (or even
suspected) FPU related regression so far.
- MPX support rework/fixes. As this is still not a released CPU
feature, there were some buglets in the code - should be much more
robust now (Dave Hansen)"
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (250 commits)
x86/fpu: Fix double-increment in setup_xstate_features()
x86/mpx: Allow 32-bit binaries on 64-bit kernels again
x86/mpx: Do not count MPX VMAs as neighbors when unmapping
x86/mpx: Rewrite the unmap code
x86/mpx: Support 32-bit binaries on 64-bit kernels
x86/mpx: Use 32-bit-only cmpxchg() for 32-bit apps
x86/mpx: Introduce new 'directory entry' to 'addr' helper function
x86/mpx: Add temporary variable to reduce masking
x86: Make is_64bit_mm() widely available
x86/mpx: Trace allocation of new bounds tables
x86/mpx: Trace the attempts to find bounds tables
x86/mpx: Trace entry to bounds exception paths
x86/mpx: Trace #BR exceptions
x86/mpx: Introduce a boot-time disable flag
x86/mpx: Restrict the mmap() size check to bounds tables
x86/mpx: Remove redundant MPX_BNDCFG_ADDR_MASK
x86/mpx: Clean up the code by not passing a task pointer around when unnecessary
x86/mpx: Use the new get_xsave_field_ptr()API
x86/fpu/xstate: Wrap get_xsave_addr() to make it safer
x86/fpu/xstate: Fix up bad get_xsave_addr() assumptions
...
Linus Torvalds [Tue, 23 Jun 2015 00:10:44 +0000 (17:10 -0700)]
Merge branch 'x86-efi-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 EFI updates from Ingo Molnar:
"EFI changes:
- Use idiomatic negative error values in efivar_create_sysfs_entry()
instead of returning '1' to indicate error (Dan Carpenter)
- Implement new support to expose the EFI System Resource Tables in
sysfs, which provides information for performing firmware updates
(Peter Jones)
- Documentation cleanup in the EFI handover protocol section which
falsely claimed that 'cmdline_size' needed to be filled out by the
boot loader (Alex Smith)
- Align the order of SMBIOS tables in /sys/firmware/efi/systab to
match the way that we do things for ACPI and add documentation to
Documentation/ABI (Jean Delvare)"
* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Work around ia64 build problem with ESRT driver
efi: Add 'systab' information to Documentation/ABI
efi: dmi: List SMBIOS3 table before SMBIOS table
efi/esrt: Fix some compiler warnings
x86, doc: Remove cmdline_size from list of fields to be filled in for EFI handover
efi: Add esrt support
efi: efivar_create_sysfs_entry() should return negative error codes
Linus Torvalds [Tue, 23 Jun 2015 00:09:32 +0000 (17:09 -0700)]
Merge branch 'x86-debug-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 debugging documentation updates from Ingo Molnar:
"Documentation updates about x86 kernel stacks"
* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/Documentation: Adapt Ingo's explanation on printing backtraces
x86/Documentation: Remove STACKFAULT_STACK bulletpoint
x86/Documentation: Move kernel-stacks doc one level up