OSDN Git Service
Brian Paul [Mon, 16 Jan 2012 17:54:19 +0000 (10:54 -0700)]
swrast: make _swrast_get_values(), _swrast_get_row() static
They were only called from in s_span.c
Brian Paul [Mon, 16 Jan 2012 17:54:13 +0000 (10:54 -0700)]
swrast: remove dstType param from _swrast_read_rgba_span()
It was always GL_FLOAT.
Brian Paul [Mon, 16 Jan 2012 17:54:01 +0000 (10:54 -0700)]
swrast: remove unused _swrast_put_row()
Ian Romanick [Sat, 21 Jan 2012 01:23:02 +0000 (17:23 -0800)]
mesa: Don't resurrect deleted ARB VAOs in glPopClientAttrib
When ARB VAOs are used, glPopClientAttrib does not resurrect a deleted
VAO or VBO. This difference between the two spec is, unfortunately,
not very well spelled out in the specs.
Fixes oglc vao(advanced.pushPop.deleteVAO) and
vao(advanced.pushPop.deleteVBO) tests.
NOTE: This is a candidate for release branches.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Ian Romanick [Mon, 23 Jan 2012 22:22:38 +0000 (14:22 -0800)]
mesa: Rename gl_array_object::VBOonly to ::ARBsemantics
There are more differences between Apple and ARB than just requiring
that all arrays be stored in VBOs. Additional uses will be added in
following commits.
Also, set the flag at Bind time instead of Gen time. The ARB_vao spec
specifies that behavior.
NOTE: This is a candidate for release branches.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Ian Romanick [Fri, 20 Jan 2012 01:29:37 +0000 (17:29 -0800)]
swrast: Use fixed-function processing instead _TexEnvProgram for DrawPixels
This is a hack to work around drivers such as i965 that:
- Set _MaintainTexEnvProgram to generate GLSL IR for
fixed-function fragment processing.
- Don't call _mesa_ir_link_shader to generate Mesa IR from the
GLSL IR.
- May use swrast to handle glDrawPixels.
Since _mesa_ir_link_shader is never called, there is no Mesa IR to
execute. Instead do regular fixed-function processing.
Even on platforms that don't need this, the software fixed-function
code is much faster than the software shader code.
NOTE: This is a candidate for the 8.0 branch.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44749
Ian Romanick [Fri, 20 Jan 2012 01:23:51 +0000 (17:23 -0800)]
mesa: Make sure _TexEnvProgram points at the current ff fragment program
At least one place, the _mesa_need_secondary_color function in
state.h, uses this to make decisions. The next patch in this series
will add another dependency. Ideally, this field would go away and be
replace by a flag or something.
NOTE: This is a candidate for the 8.0 branch.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Brian Paul [Tue, 24 Jan 2012 18:15:43 +0000 (11:15 -0700)]
softpipe: move var initialization to silence warning
Brian Paul [Tue, 24 Jan 2012 18:15:23 +0000 (11:15 -0700)]
r600g: remove unused variable
Alexander von Gluck [Sun, 22 Jan 2012 18:42:38 +0000 (12:42 -0600)]
glsl: Don't use newlocale on Haiku
NOTE: This is a candidate for the 8.0 branch.
Signed-off-by: Brian Paul <brianp@vmware.com>
Alexander von Gluck [Sun, 22 Jan 2012 18:42:32 +0000 (12:42 -0600)]
mesa: Don't use newlocale on Haiku
NOTE: This is a candidate for the 8.0 branch.
Signed-off-by: Brian Paul <brianp@vmware.com>
Alexander von Gluck [Sun, 22 Jan 2012 18:42:24 +0000 (12:42 -0600)]
svga: fix typedef conflicts on Haiku
NOTE: This is a candidate for the 8.0 branch.
Signed-off-by: Brian Paul <brianp@vmware.com>
Alexander von Gluck [Sun, 22 Jan 2012 18:42:17 +0000 (12:42 -0600)]
llvmpipe: fix symbol conflict on Haiku
NOTE: This is a candidate for the 8.0 branch.
Signed-off-by: Brian Paul <brianp@vmware.com>
Alexander von Gluck [Sun, 22 Jan 2012 18:42:10 +0000 (12:42 -0600)]
scons: Remove Haiku one-offs for gallium drivers
NOTE: This is a candidate for the 8.0 branch.
Signed-off-by: Brian Paul <brianp@vmware.com>
Michel Dänzer [Tue, 24 Jan 2012 16:57:56 +0000 (17:57 +0100)]
gallium/postprocess: Proper reference counting of pp_jimenezmlaa depth buffer.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=40776
NOTE: This is a candidate for the stable branches.
Matt Turner [Tue, 24 Jan 2012 16:34:42 +0000 (11:34 -0500)]
Revert "Always build shared glapi"
This reverts commit
adefee50d954151f76150af80207081ae3c247d9.
Shared glapi was never tested with --enable-xlib-glx and turns out
to cause a lot of problems.
Conflicts:
configure.ac
Matt Turner [Tue, 24 Jan 2012 16:14:42 +0000 (11:14 -0500)]
gbm: install libgbm.so into lib
This partially reverts commit
90e256853418eaaba3717f930cc6a331e4099056.
Adam Jackson [Tue, 24 Jan 2012 15:51:15 +0000 (10:51 -0500)]
llvmpipe: Fix math error in LP_DEBUG=counters output
Signed-off-by: Adam Jackson <ajax@redhat.com>
Vadim Girlin [Tue, 24 Jan 2012 14:22:20 +0000 (18:22 +0400)]
r600g: fix inconsistency with INTERP* opcode definitions
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Vadim Girlin [Tue, 24 Jan 2012 11:32:52 +0000 (15:32 +0400)]
r600g: replace raw opcodes with names in the is_alu_trans/vector
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Vadim Girlin [Tue, 24 Jan 2012 11:32:51 +0000 (15:32 +0400)]
r600g: add missing opcode definitions
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Vadim Girlin [Mon, 23 Jan 2012 09:23:19 +0000 (13:23 +0400)]
r600g: fix loop break/continue operations
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Vadim Girlin [Mon, 23 Jan 2012 10:12:46 +0000 (14:12 +0400)]
r600g: fix fragcoord.w
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Benjamin Franzke [Tue, 24 Jan 2012 09:12:59 +0000 (10:12 +0100)]
targets/gbm: Fix install path
GBM_BACKEND_INSTALL_DIR was deleted by commit
06ad64ad29e7aa9e2d001f6bd1f8c1c1f77050b8.
Since we dont need this configurable, use $(INSTALL_LIB_DIR)/gbm now.
Benjamin Franzke [Tue, 24 Jan 2012 08:29:43 +0000 (09:29 +0100)]
gbm/Makefile.template: Remove builtin-compile path
Builtins are handled by the main gbm Makefile since
06ad64ad29e7aa9e2d001f6bd1f8c1c1f77050b8.
Benjamin Franzke [Tue, 24 Jan 2012 08:24:06 +0000 (09:24 +0100)]
egl,gbm_gallium: Fix linkage against gbm from automake
Add src/gbm/.libs to ldflags.
The gbm lib is src/gbm/.libs/ instead of lib/
as of commit
06ad64ad29e7aa9e2d001f6bd1f8c1c1f77050b8.
Vadim Girlin [Mon, 23 Jan 2012 11:58:31 +0000 (15:58 +0400)]
r600g: fix interpolation with clipvertex
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Chad Versace [Wed, 18 Jan 2012 23:56:58 +0000 (15:56 -0800)]
swrast: Fix unsigned promotion in pointer arithmetic
When rowstride was negatie, unsigned promotion caused a segfault here:
299│ if (rb->Format == MESA_FORMAT_S8) {
300│ const GLuint rowStride = rb->RowStride;
301│ for (i = 0; i < count; i++) {
302│ if (x[i] >= 0 && y[i] >= 0 && x[i] < w && y[i] < h) {
303├> stencil[i] = *(map + y[i] * rowStride + x[i]);
304│ }
305│ }
306│ }
Fixes segfault in oglconform
separatestencil-neu(NonPolygon.BothFacesBitmapCoreAPI),
though test still fails.
Note: This is a candidate for the stable branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43327
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Ian Romanick [Sat, 21 Jan 2012 00:08:01 +0000 (16:08 -0800)]
meta: Fallback for glBlitFramebuffer from a multisample surface
NOTE: This is a candidate for the 8.0 branch.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44818
Paul Berry [Thu, 19 Jan 2012 23:49:43 +0000 (15:49 -0800)]
i965/vs: Fix bogus assertion in emit_block_move()
i965 processes assignments of whole structures using
vec4_visitor::emit_block_move, a recursive function which visits each
element of a structure or array (to arbitrary nesting depth) and
copies it from the source to the destination. Then it increments the
source and destination register numbers so that further recursive
invocations will copy the rest of the structure. In addition, it sets
the swizzle field for the source register to an appropriate value of
swizzle_for_size(...) for the size of each element being copied, so
that later optimization passes won't be fooled into thinking that
unused vector elements are live.
This all works fine. However, emit_block_move also contains an
assertion to verify, before setting the swizzle field for the source
register, that the source register doesn't already contain a
nontrivial swizzle. The intention is to make sure that the caller of
emit_block_move hasn't already done some swizzling of the data before
the call, which emit_block_move would then counteract when it
overwrites the swizzle field. But the assertion is at the lowest
level of nesting of emit_block_move, which means that after the first
element is copied, instead of checking the swizzle field set by the
caller, it checks the swizzle field used when moving the previous
element. That means that if the structure contains elements of
different vector sizes (which therefore require different swizzles),
the assertion will erroneously fire.
This patch moves the assertion from emit_block_move to the calling
function, vec4_visitor::visit(ir_assignment *). Since the caller is
non-recursive, the assertion will only happen once, and won't be
fooled by emit_block_move's modification of the swizzle field.
This patch also reverts commit
fe006a7 (i965/vs: Fix swizzle related
assertion), which attempted to fix the bug by making the assertion
more lenient, but only worked properly for structures, arrays, and
matrices in which each constituent vector is the same size.
This fixes the problem described in comment 9 of
https://bugs.freedesktop.org/show_bug.cgi?id=40865. Unfortunately, it
doesn't fix the whole bug, since the test in question is also failing
due to lack of register spilling support in the VS.
Fixes piglit test vs-assign-varied-struct. No piglit regressions on
Sandy Bridge.
This is a candidate for the 8.0 release branch.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=40865#c9
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Alex Deucher [Mon, 23 Jan 2012 21:41:52 +0000 (16:41 -0500)]
r600g: clean up register headers
- CP_INTERRUPT packet doesn't exist
- remove lots of r6xx copy/paste remnants from evergreen reg header
- fix some cayman specific registers
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Anholt [Wed, 18 Jan 2012 22:42:26 +0000 (14:42 -0800)]
i965/vs: Enable workaround-free math on gen7.
This is similar to a commit that did the same for the FS.
Shaves several more instructions off of the VS in Lightsmark, but no
statistically significant performance difference (n=5).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Eric Anholt [Wed, 18 Jan 2012 20:58:45 +0000 (12:58 -0800)]
i965/vs: Use the embedded-comparison SEL on gen6+, like the FS does.
Shaves a few instructions off of the VS in Lightsmark, but no
statistically significant performance difference on gen7 (n=5).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Mon, 16 Jan 2012 02:30:26 +0000 (21:30 -0500)]
automake: src/gbm
libgbm.so.1.0.0 (instead of libgbm.so.1.0) is installed now
along with libgbm.so.1 (no change).
Eric Anholt [Wed, 18 Jan 2012 19:27:24 +0000 (11:27 -0800)]
autoconf: Fix build of dri symbols test to not manually link expat.
AC_CHECK_LIB has this nasty behavior, like the cflags tests, of
automatically putting the tested value into the global LIBS on
success. This caused -lexpat to end up in LIBS, but without the
--with-expat dir, so my 32-bit build on a 64 system using expat from a
custom prefix could only find the system expat and fail to link on the
one current consumer of the LIBS variable: the dri driver test link.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Kenneth Graunke [Fri, 20 Jan 2012 11:33:40 +0000 (03:33 -0800)]
i965: Fix border color on Sandybridge and Ivybridge.
While reading through the simulator, I found some interesting code that
looks like it checks the sampler default color pointer against the bound
set in STATE_BASE_ADDRESS. On failure, it appears to program it to the
base address itself.
So I decided to try programming a legitimate bound, and lo and behold,
border color worked.
+92 piglits on Sandybridge. Also fixes Lightsmark on Ivybridge.
NOTE: This is a candidate for stable release branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=28924
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38868
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Jon TURNEY [Sun, 22 Jan 2012 13:23:26 +0000 (13:23 +0000)]
Fix underlinking in libOSMesa since commit
adefee5 "Always build shared glapi"
Since we now always build shared glapi, this exposes the fact that libOSMesa was
underlinked when glapi was built shared.
Fix this by doing the same thing as drivers/X11/Makefile already does, ensuring
that the library is linked with the shared glapi library.
(I'm not clear why we link with both glapi.a and glapi.so, so this may be all wrong)
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Jon TURNEY [Sun, 22 Jan 2012 14:21:56 +0000 (14:21 +0000)]
Don't build shared dricore when unneeded
Refine "always build shared dricore" so we don't build it if we don't need
it because we aren't actually building any dri drivers because of --disable-driglx-direct
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Dave Airlie [Mon, 23 Jan 2012 13:18:16 +0000 (13:18 +0000)]
r600g: cayman fix integer multiplies
Looks insane, but it does appear we need a full slot per input/output.
This fixes another 180 or so piglit tests.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Mon, 23 Jan 2012 11:21:43 +0000 (11:21 +0000)]
r600g: cayman initial integer support
Adds all the easier lowhanging opcodes.
Fixes ~3000 piglit tests with GLSL1.30 enabled on cayman.
This just leaves the mul/div/mod ops to fix up.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Vadim Girlin [Mon, 23 Jan 2012 09:47:51 +0000 (13:47 +0400)]
r600g: fix VS fog export
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Matt Turner [Sun, 22 Jan 2012 22:15:03 +0000 (17:15 -0500)]
dri: install dri_interface.h
Broken in commit
129213e7.
Reported-by Kai Wasserbäch <kai@dev.carbon-project.org>
Dave Airlie [Sun, 22 Jan 2012 17:24:29 +0000 (17:24 +0000)]
r600g: shift integer ops are trans unit only on r600.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Vadim Girlin [Sat, 21 Jan 2012 20:17:11 +0000 (00:17 +0400)]
r600g: replace trans/vector-only instruction lists with ranges (v2)
airlied : assert on cayman cases to keep compiler happy
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Sun, 22 Jan 2012 17:09:34 +0000 (17:09 +0000)]
Revert "r600g: replace trans/vector-only instruction lists with ranges"
This reverts commit
946309067c835d35a85ab2ad774df6698e6669ab.
Until we check the cayman bits out properly
Dave Airlie [Sun, 22 Jan 2012 16:52:19 +0000 (16:52 +0000)]
r600g: srgb mode is only valid on certain format types.
"If set, forces degamma on XYZ if format is
FMT_8_8_8_8, FMT_BC1, FMT_BC2, or FMT_BC3"
Don't claim support for sRGB on any other formts.
This fixes glean texture_srgb.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Sun, 22 Jan 2012 16:14:32 +0000 (16:14 +0000)]
r600g: initial cube shadow sampling
It doesn't pass the piglit test, but it seems to be a lot closer
than it was before. I need to track down if there is another problem.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Vadim Girlin [Sat, 21 Jan 2012 21:49:46 +0000 (01:49 +0400)]
r600g: take into account kcache banks for bank swizzle check
Due to the changes for multiple kcache banks support, now we are assigning
final SRCx_SEL values for kcache access at the later stage, when building the
bytecode. So we need to take into account kcache banks to distinguish
the constants with the same address but different bank index.
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Vadim Girlin [Sat, 21 Jan 2012 20:17:12 +0000 (00:17 +0400)]
r600g: set round_mode to truncate and get rid of tgsi_f2i on evergreen
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Vadim Girlin [Sat, 21 Jan 2012 20:17:11 +0000 (00:17 +0400)]
r600g: replace trans/vector-only instruction lists with ranges
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Vadim Girlin [Sat, 21 Jan 2012 20:17:10 +0000 (00:17 +0400)]
r600g: fix some interpolation tests for evergreen
Same fix as previously done by Dave Airlie for r600/r700
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Matt Turner [Sun, 22 Jan 2012 03:43:02 +0000 (22:43 -0500)]
configure.ac: use AC_PROG_MKDIR_P
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=45057
Matt Turner [Fri, 20 Jan 2012 21:01:38 +0000 (16:01 -0500)]
Remove src/mesa/ppc
It didn't actually do anything except modify the GL_RENDERER string.
Andrei Slăvoiu [Sat, 21 Jan 2012 16:36:26 +0000 (11:36 -0500)]
Vadim Girlin [Fri, 20 Jan 2012 21:37:48 +0000 (01:37 +0400)]
r600g: implement clip vertex v2
Clip planes are uploaded as a constant buffer and used by the vertex
shader to produce corresponding clip distances for hw clipping.
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Vadim Girlin [Fri, 20 Jan 2012 19:24:32 +0000 (23:24 +0400)]
r600g: improve kcache line sets handling v2
Add support for multiple kcache banks (constant buffers).
Lock the required lines only.
Allow up to 4 kcache line sets in the alu clause by using ALU_EXTENDED on eg+.
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Sat, 21 Jan 2012 12:15:10 +0000 (22:15 +1000)]
r600g: no need to do CUBE coordinate handling for TXQ.
Fixes texSize on cube.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Vadim Girlin [Sat, 21 Jan 2012 00:48:12 +0000 (04:48 +0400)]
r600g: make INTERP_LOAD_P0 vector-only
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Vinson Lee [Tue, 17 Jan 2012 02:01:22 +0000 (18:01 -0800)]
glsl: Fix 'control reaches end of non-void function' warning.
Fix this GCC warning on non-debug builds.
glsl_types.cpp: In member function 'gl_texture_index
glsl_type::sampler_index() const':
glsl_types.cpp:157: warning: control reaches end of non-void function
NOTE: This is a candidate for the 8.0 branch.
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Alex Deucher [Fri, 20 Jan 2012 23:04:44 +0000 (18:04 -0500)]
r600g: use S_028B20_BUFFER_0_EN macro for streamout buffer enable
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 20 Jan 2012 23:01:58 +0000 (18:01 -0500)]
r600g: update streamout support for virtual addresses
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Matt Turner [Fri, 20 Jan 2012 21:53:31 +0000 (16:53 -0500)]
Remove reference to now deleted dri/Makefile.targets
Matt Turner [Sun, 15 Jan 2012 16:50:20 +0000 (11:50 -0500)]
automake: src/mesa/drivers/dri
Matt Turner [Sun, 15 Jan 2012 16:39:48 +0000 (11:39 -0500)]
automake: src/mesa/drivers/dri/swrast
Matt Turner [Sun, 15 Jan 2012 15:20:30 +0000 (10:20 -0500)]
automake: src/mesa/drivers/dri/nouveau
Matt Turner [Sun, 15 Jan 2012 15:04:58 +0000 (10:04 -0500)]
automake: src/mesa/drivers/dri/r200
Matt Turner [Sun, 15 Jan 2012 03:21:30 +0000 (22:21 -0500)]
automake: src/mesa/drivers/dri/radeon
Matt Turner [Sun, 15 Jan 2012 02:57:32 +0000 (21:57 -0500)]
automake: src/mesa/drivers/dri/i915
Vadim Girlin [Wed, 18 Jan 2012 09:46:26 +0000 (13:46 +0400)]
r600g: fix streamout on evergreen
Enable it in the evergreen_context_draw if needed.
Same as already done in the r600_context_draw for r6xx/r7xx.
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Vadim Girlin [Wed, 18 Jan 2012 19:17:29 +0000 (23:17 +0400)]
r600g: fix combined MEM_STREAM instructions
BURST_COUNT is clipped with ARRAY_SIZE, so set it to the max value
to avoid clipping.
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Matt Turner [Fri, 13 Jan 2012 19:30:36 +0000 (14:30 -0500)]
Always build shared dricore
Tested-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Matt Turner [Wed, 11 Jan 2012 23:32:14 +0000 (18:32 -0500)]
Always build shared glapi
libglapi.so, libGL.so, libGLESv2.so, libGLESv1_CM.so must all
come from the same version of Mesa or bad things may happen.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Matt Turner [Thu, 12 Jan 2012 00:02:26 +0000 (19:02 -0500)]
Remove -ffast-math from default CFLAGS
Fixes glsl-const-folding-01. inversesqrt(1.0) != 1.0 was evaluating as
true.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Chad Versace [Thu, 19 Jan 2012 21:08:48 +0000 (13:08 -0800)]
intel/gen6: Some framebuffers having separate depthstencil should be unsupported
When the framebuffer has separate depth and stencil buffers, and HiZ is
not enabled on the depth buffer, mark the framebuffer as unsupported. This
happens when trying to create a framebuffer with Z16/S8 because we haven't
enabled HiZ on Z16 yet.
Fixes gles2conform test stencil8.
Note: This is a candiate for the 8.0 branch.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44948
Reviewed-and-tested-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed--by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Chad Versace [Tue, 17 Jan 2012 20:01:34 +0000 (12:01 -0800)]
mesa: Loosen glBlitFramebuffer restrictions on depthstencil buffers (v2)
This loosens the format validation in glBlitFramebuffer. When blitting
depth bits, don't require an exact match between the depth formats; only
require that the two formats have the same number of depth bits and the
same depth datatype (float vs uint). Ditto for stencil.
Between S8_Z24 buffers, the EXT_framebuffer_blit spec allows
glBlitFramebuffer to blit the depth and stencil bits separately. So I see
no reason to prevent blitting the depth bits between X8_Z24 and S8_Z24 or
the stencil bits between S8 and S8_Z24. However, we of course don't want
to allow blitting from Z32 to Z32_FLOAT.
Fixes Piglit fbo/fbo-blit-d24s8 on Intel drivers with separate stencil
enabled.
The problem was that, on Intel drivers with separate stencil, the default
framebuffer has separate depth and stencil buffers with formats X8_Z24 and
S8. The test attempts to blit the depth bits from a S8_Z24 buffer into the
default framebuffer.
v2: Check that depth datatypes match.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44665
Note: This is a candidate for the 8.0 branch.
Reported-by: Xunx Fang <xunx.fang@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Christoph Bumiller [Fri, 20 Jan 2012 12:43:32 +0000 (13:43 +0100)]
nvc0: fix some limit cap values
NOTE: This is a candidate for the 8.0 branch.
Christoph Bumiller [Fri, 20 Jan 2012 12:29:42 +0000 (13:29 +0100)]
nvc0: handle discontiguous outputs in stream_output_info
Christoph Bumiller [Fri, 20 Jan 2012 12:24:46 +0000 (13:24 +0100)]
mesa: allocate transform_feedback_info::Outputs array dynamically
The nvc0 gallium driver is advertising 128 MAX_INTERLEAVED_COMPS
which made it always assert in the linker when TFB was used since
the Outputs array was smaller than that maximum.
v2: added assertions
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Dave Airlie [Wed, 18 Jan 2012 15:16:55 +0000 (15:16 +0000)]
r600g: fixup AR handling (v5)
So it appears R600s (except rv670) do AR handling different using a different
opcode. This patch fixes up r600g to work properly on r600.
This fixes ~100 piglit tests here (in GLSL1.30 mode) on rv610.
v3: add index_mode as per the docs.
This still fails any dst relative tests for some reason I can't quite see yet,
but it passes a lot more tests than without.
v4: add a nop after dst.rel this could be improved using a second pass,
where we only insert nops if two instructions are sure to collide.
The docs say r600, rv610, rv630 needs this, and not rv670, rs780, rs880,
need AMD to confirm rv620, rv635.
v5: add is_nop_inst.
NOTE: This is a candidate for stable branches.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Brian Paul [Fri, 20 Jan 2012 17:55:15 +0000 (10:55 -0700)]
mesa: include arrayobj.h to silence implicit function declaration warning
Caused by commit
7a1e941ebee43cb97a2c77fd2269999b202308a2.
Mathias Fröhlich [Thu, 29 Dec 2011 12:10:01 +0000 (13:10 +0100)]
mesa: Fix and speedup gl_array_object::_MaxElement computation.
Use a bitmask approach to compute gl_array_object::_MaxElement.
To make this work correctly depending on the shader type actually used,
make use of the newly introduced typed bitmask getters.
With this change I gain about 5% draw time on some osgviewer examples.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
Mathias Froehlich [Thu, 29 Dec 2011 12:10:00 +0000 (13:10 +0100)]
mesa: Introduce enabled bitfield helper functions.
Depending on the installed shader type, different arrays are used
from gl_array_object. Provide helper functions that compute
the bitmask of these arrays that are finally enabled for a given
shader type. The will be used in a followup change.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
Mathias Fröhlich [Thu, 29 Dec 2011 12:10:00 +0000 (13:10 +0100)]
mesa: Use BITFIELD64_RANGE for VERT_BIT_*_ALL.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
Stéphane Marchesin [Fri, 20 Jan 2012 01:18:55 +0000 (17:18 -0800)]
i915g: Fix indentation.
Stéphane Marchesin [Fri, 20 Jan 2012 00:28:23 +0000 (16:28 -0800)]
i915g: Fix indentation and comment.
Paul Berry [Tue, 17 Jan 2012 18:28:10 +0000 (10:28 -0800)]
glsl: Fix isinf() for non-C99-compliant compilers.
Commit
ede60bc4670a8d9c14921c77abee1ac57fc0e6bf (glsl: Add isinf() and
isnan() builtins) uses "+INF" in the .ir file to represent infinity.
This worked on C99-compliant compilers, since the s-expression reader
uses strtod() to read numbers, and C99 requires strtod() to understand
"+INF". However, it didn't work on non-C99-compliant compilers such
as MSVC.
This patch modifies the s-expression reader to explicitly check for
"+INF" rather than relying on strtod() to support it.
This is a candidate for the 8.0 branch.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44767
Tested-by: Morgan Armand <morgan.devel@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Alex Deucher [Fri, 20 Jan 2012 02:07:58 +0000 (21:07 -0500)]
r600g: fix typo in evergreen register
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Brian Paul [Thu, 19 Jan 2012 18:37:00 +0000 (11:37 -0700)]
svga: move svga_texture() casts/calls in svga_surface_copy()
To fix failed assertions when calling glCopyBufferSubData().
svga_texture() asserts that the resource is a texture. Simply move the
calls to svga_texture() after the code that handles non-texture copies
so that we don't call it with non-texture resources.
Fixes glean bufferObject failure.
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Brian Paul [Thu, 19 Jan 2012 17:20:24 +0000 (10:20 -0700)]
st/mesa: copy num_immediates field when copying the immediates array
Two assignments to num_immediates were missing in
get_pixel_transfer_visitor() and get_bitmap_visitor().
The uninitialized value led to valgrind errors and crashes in some
cases.
Added new assertions to catch future problems in this area. Also
changed num_immediates to unsigned to avoid signed/unsigned
comparison warnings.
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Ian Romanick [Wed, 18 Jan 2012 00:24:05 +0000 (16:24 -0800)]
mesa: Set default access flags based on the run-time API
The default access flags for OpenGL ES (via GL_OES_map_buffer) and
desktop OpenGL are different. The code previously tried to handle
this, but the decision was made at compile time. Since the same
driver binary can be used for both OpenGL ES and desktop OpenGL, the
decision must be made at run-time.
This should fix bug #44433. It appears that the test case does
various map and unmap operations and inspects the state of the buffer
object around each. When it sees that GL_BUFFER_ACCESS does not match
its expectations, it fails.
NOTE: This is a candidate for release branches.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44433
Brian Paul [Thu, 19 Jan 2012 16:41:30 +0000 (09:41 -0700)]
st/mesa: add fallback pipe formats for (compressed) R, RG formats
If we don't find an exact PIPE_FORMAT_x for a GL_(COMPRESSED)_RED/RG format,
try uncompressed formats. We were already doing this for the RGB(A) formats.
Fixes piglit arb_texture_compression-internal-format-query test.
NOTE: This is a candidate for the stable branches.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Stéphane Marchesin [Thu, 19 Jan 2012 03:24:18 +0000 (19:24 -0800)]
i915g: Don't avoid flushing when we have a pending fence.
Otherwise the fence will never arrive.
Also check for a NULL i915->batch.
NOTE: This is a candidate for the 8.0 branch.
Stéphane Marchesin [Thu, 19 Jan 2012 03:23:48 +0000 (19:23 -0800)]
i915g: Don't invert signalled/unsignalled fences
NOTE: This is a candidate for the 8.0 branch.
Kenneth Graunke [Wed, 18 Jan 2012 08:55:12 +0000 (00:55 -0800)]
i965: Fix disassembly of data port writes on Ivybridge.
msg_type moved by a bit, so the message type was being disassembled
incorrectly. In particular, render target writes were showing up as
"OWORD block write".
NOTE: This is a candidate for stable release branches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Kenneth Graunke [Wed, 18 Jan 2012 08:50:31 +0000 (00:50 -0800)]
i965: Fix disassembly of sampler messages on Ivybridge.
Compared to sampler_gen5, simd_mode shifted by a bit and msg_type grew
by a bit. So we were printing slightly incorrect numbers.
NOTE: This is a candidate for stable release branches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Kenneth Graunke [Wed, 18 Jan 2012 12:53:40 +0000 (04:53 -0800)]
i965/vs: Take attributes into account when deciding urb_entry_size.
Both the VF and VS share space in the URB. First, the VF stores
attributes (shader inputs) there. The VS then reads the attributes,
executes, and reuses the space to store varyings (shader outputs).
Thus, we need to calculate the amount of URB space necessary for inputs,
outputs, and pick whichever is greater.
The old VS backend correctly did this (brw_vs_emit.c:408), but the new
VS backend only considered outputs.
Fixes vertex scrambling in GLBenchmark PRO on Ivybridge.
NOTE: This is a candidate for the 8.0 branch.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41318
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Stéphane Marchesin [Wed, 18 Jan 2012 21:03:56 +0000 (13:03 -0800)]
st/dri: Remove useless flush front.
In the following scenario:
- CreateContext C1
- MakeCurrent C1
- DestroyContext C1 (does not actually destroy the first context, postponed
until the next MakeCurrent)
- CreateContext C2
- MakeCurrent C2
MakeCurrent will call flush on a half destroyed context, leading to crashes.
Since the other paths (destroy and makecurrent) already flush the context,
there is no need to flush here, so we remove this useless flush front call.
This fixes GPU crashes with Chrome and gallium drivers.
Ian Romanick [Tue, 17 Jan 2012 20:41:15 +0000 (12:41 -0800)]
intel: Set depth to 6 for cubemaps
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41216
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43212
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43250
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jin Yang <jin.a.yang@intel.com>
Kristian Høgsberg [Wed, 18 Jan 2012 20:32:35 +0000 (15:32 -0500)]
gbm: Validate usage flags in gbm_bo_create_from_egl_image()
The entry point is supposed to validate that the EGLImage is suitable for
the passed in usage flags, but that was never implemented.
Eric Anholt [Fri, 18 Nov 2011 01:11:00 +0000 (17:11 -0800)]
i965: Add support for Z16 depth formats.
v2: Don't flag the format as being HiZ ready (there's DRI2 handshake
pain to go through).
Fixes piglit gl-3.0-required-sized-texture-formats
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>