OSDN Git Service
Peter Maydell [Mon, 11 Jul 2016 18:09:12 +0000 (19:09 +0100)]
target-arm: Fix unreachable code in gicv3_class_name()
Coverity complains that the exit() in gicv3_class_name()
can be unreachable, because if TARGET_AARCH64 is defined
then all code paths return before reaching it. Move the
exit() up to the error_report() that it belongs with.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id:
1468260552-8400-1-git-send-email-peter.maydell@linaro.org
Peter Maydell [Tue, 19 Jul 2016 14:04:36 +0000 (15:04 +0100)]
disas: Fix ATTRIBUTE_UNUSED define clash with ALSA headers
disas/bfd.h defines ATTRIBUTE_UNUSED, but unfortunately the
ALSA system headers also define this macro, which means that
you can get a compilation failure if building with ALSA and
any files happen to include the alsa headers before bfd.h
rather than the other way around.
This is unfortunate namespace pollution by the ALSA headers but
we can work around it. Add an #ifndef guard to bfd.h and remove
the unnecessary extra definition in disas/arm.c to fix this.
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
1468937076-21503-1-git-send-email-peter.maydell@linaro.org
Peter Maydell [Tue, 19 Jul 2016 14:08:05 +0000 (15:08 +0100)]
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* two old patches from prospective GSoC students
* i386 -kernel device tree support
* Coverity fix
* memory usage improvement from Peter
* checkpatch fix
* g_path_get_dirname cleanup
* caching of block status for iSCSI
# gpg: Signature made Tue 19 Jul 2016 07:43:41 BST
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
target-i386: Remove redundant HF_SOFTMMU_MASK
block/iscsi: allow caching of the allocation map
block/iscsi: fix rounding in iscsi_allocationmap_set
Move README to markdown
cpu-exec: Move down some declarations in cpu_exec()
exec: avoid realloc in phys_map_node_reserve
checkpatch: consider git extended headers valid patches
megasas: remove useless check for cmd->frame
compiler: never omit assertions if using a static analysis tool
hw/i386: add device tree support
Changed malloc to g_malloc, free to g_free in bsd-user/qemu.h
use g_path_get_dirname instead of dirname
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 19 Jul 2016 13:41:41 +0000 (14:41 +0100)]
Merge remote-tracking branch 'remotes/stsquad/tags/pull-travis-
20160718-1' into staging
Make IRC a little less noisy
# gpg: Signature made Mon 18 Jul 2016 16:42:57 BST
# gpg: using RSA key 0xFBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>"
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-travis-
20160718-1:
.travis.yml: Disable IRC build status updates from forks
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 19 Jul 2016 13:07:27 +0000 (14:07 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-vnc-
20160719-1' into staging
vnc: bugfixes for -rc0
# gpg: Signature made Tue 19 Jul 2016 08:27:05 BST
# gpg: using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/pull-vnc-
20160719-1:
vnc-tight: fix regression with libxenstore
vnc-enc-tight: fix off-by-one bug
vnc: make sure we finish disconnect
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 19 Jul 2016 12:41:31 +0000 (13:41 +0100)]
Merge remote-tracking branch 'remotes/mcayland/tags/qemu-openbios-signed' into staging
Update OpenBIOS images
# gpg: Signature made Tue 19 Jul 2016 07:42:30 BST
# gpg: using RSA key 0x5BC2C56FAE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* remotes/mcayland/tags/qemu-openbios-signed:
Update OpenBIOS images to
e79bca6 built from submodule.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 19 Jul 2016 12:00:35 +0000 (13:00 +0100)]
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Tue 19 Jul 2016 03:33:40 BST
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
e1000e: fix building without CONFIG_VMXNET3_PCI
MAINTAINERS: release Scott from being a rocker maintainer
tap: fix memory leak on failure to create a multiqueue tap device
net: fix incorrect argument to iov_to_buf
net: fix incorrect access to pointer
e1000e: fix incorrect access to pointer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 19 Jul 2016 10:47:06 +0000 (11:47 +0100)]
Merge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into staging
# gpg: Signature made Mon 18 Jul 2016 23:53:15 BST
# gpg: using RSA key 0x7DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>"
# Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB
# Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E
* remotes/jnsnow/tags/ide-pull-request:
block: ignore flush requests when storage is clean
tests: in IDE and AHCI tests perform DMA write before flushing
ide: set retry_unit for PIO and FLUSH requests
ide: refactor retry_unit set and clear into separate function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 19 Jul 2016 09:54:49 +0000 (10:54 +0100)]
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
# gpg: Signature made Mon 18 Jul 2016 22:59:55 BST
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request:
trace: Add QAPI/QMP interfaces to query and control per-vCPU tracing state
trace: Allow event name pattern in "info trace-events"
trace: Conditionally trace events based on their per-vCPU state
trace: Add per-vCPU tracing states for events with the 'vcpu' property
trace: Cosmetic changes on fast-path tracing
disas: Remove unused macro '_'
trace: Identify events with the 'vcpu' property
trace: [bsd-user] Commandline arguments to control tracing
trace: [linux-user] Commandline arguments to control tracing
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 19 Jul 2016 08:02:05 +0000 (09:02 +0100)]
Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-
20160718.0' into staging
VFIO update 2016-07-18
One fix for 2.7-rc0 which hides the ARI extended capability, fixing
multifunction support in PCIe configurations where the assigned device
function topology does not match the host (Alex Williamson)
# gpg: Signature made Mon 18 Jul 2016 18:02:27 BST
# gpg: using RSA key 0x239B9B6E3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>"
# gpg: aka "Alex Williamson <alex@shazbot.org>"
# gpg: aka "Alex Williamson <alwillia@redhat.com>"
# gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>"
# Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B 8A90 239B 9B6E 3BB0 8B22
* remotes/awilliam/tags/vfio-update-
20160718.0:
vfio/pci: Hide ARI capability
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark Cave-Ayland [Tue, 19 Jul 2016 06:41:52 +0000 (07:41 +0100)]
Update OpenBIOS images to
e79bca6 built from submodule.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Sergey Fedorov [Fri, 15 Jul 2016 17:58:45 +0000 (20:58 +0300)]
target-i386: Remove redundant HF_SOFTMMU_MASK
'HF_SOFTMMU_MASK' is only set when 'CONFIG_SOFTMMU' is defined. So
there's no need in this flag: test 'CONFIG_SOFTMMU' instead.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20160715175852.30749-6-sergey.fedorov@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Lieven [Mon, 18 Jul 2016 08:52:20 +0000 (10:52 +0200)]
block/iscsi: allow caching of the allocation map
until now the allocation map was used only as a hint if a cluster
is allocated or not. If a block was not allocated (or Qemu had
no info about the allocation status) a get_block_status call was
issued to check the allocation status and possibly avoid
a subsequent read of unallocated sectors. If a block known to be
allocated the get_block_status call was omitted. In the other case
a get_block_status call was issued before every read to avoid
the necessity for a consistent allocation map. To avoid the
potential overhead of calling get_block_status for each and
every read request this took only place for the bigger requests.
This patch enhances this mechanism to cache the allocation
status and avoid calling get_block_status for blocks where
the allocation status has been queried before. This allows
for bypassing the read request even for smaller requests and
additionally omits calling get_block_status for known to be
unallocated blocks.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <
1468831940-15556-3-git-send-email-pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Lieven [Mon, 18 Jul 2016 08:52:19 +0000 (10:52 +0200)]
block/iscsi: fix rounding in iscsi_allocationmap_set
when setting clusters as alloacted the boundaries have
to be expanded. As Paolo pointed out the calculation of
the number of clusters is wrong:
Suppose cluster_sectors is 2, sector_num = 1, nb_sectors = 6:
In the "mark allocated" case, you want to set 0..8, i.e.
cluster_num=0, nb_clusters=4.
0--.--2--.--4--.--6--.--8
<--|_________________|--> (<--> = expanded)
Instead you are setting nb_clusters=3, so that 6..8 is not marked.
0--.--2--.--4--.--6--.--8
<--|______________|!!! (! = wrong)
Cc: qemu-stable@nongnu.org
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <
1468831940-15556-2-git-send-email-pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pranith Kumar [Fri, 15 Jul 2016 04:31:11 +0000 (00:31 -0400)]
Move README to markdown
Move the README file to markdown so that it makes the github page look
prettier. I know that github repo is a mirror and not the official
repo, but I think it doesn't hurt to have it in markdown format.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-Id: <
20160715043111.29007-1-bobby.prani@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Evgeny Yakovlev [Mon, 18 Jul 2016 19:39:52 +0000 (22:39 +0300)]
block: ignore flush requests when storage is clean
Some guests (win2008 server for example) do a lot of unnecessary
flushing when underlying media has not changed. This adds additional
overhead on host when calling fsync/fdatasync.
This change introduces a write generation scheme in BlockDriverState.
Current write generation is checked against last flushed generation to
avoid unnessesary flushes.
The problem with excessive flushing was found by a performance test
which does parallel directory tree creation (from 2 processes).
Results improved from 0.424 loops/sec to 0.432 loops/sec.
Each loop creates 10^3 directories with 10 files in each.
This affected some blkdebug testcases that were expecting error logs from
failure-injected flushes which are now skipped entirely
(tests 026 071 089).
This also affects the performance of block jobs and thus BLOCK_JOB_READY
events for driver-mirror and active block-commit commands now arrives
faster, before QMP send successfully returns to caller (tests 141 144).
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id:
1468870792-7411-5-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Evgeny Yakovlev [Mon, 18 Jul 2016 19:39:51 +0000 (22:39 +0300)]
tests: in IDE and AHCI tests perform DMA write before flushing
Due to changes in flush behaviour clean disks stopped generating
flush_to_disk events and IDE and AHCI tests that test flush commands
started to fail.
This change adds additional DMA writes to affected tests before sending
flush commands so that bdrv_flush actually generates flush_to_disk event.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id:
1468870792-7411-4-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Evgeny Yakovlev [Mon, 18 Jul 2016 19:39:50 +0000 (22:39 +0300)]
ide: set retry_unit for PIO and FLUSH requests
The following sequence of tests discovered a problem in IDE emulation:
1. Send DMA write to IDE device 0
2. Send CMD_FLUSH_CACHE to same IDE device which will be failed by block
layer using blkdebug script in tests/ide-test:test_retry_flush
When doing DMA request ide/core.c will set s->retry_unit to s->unit in
ide_start_dma. When dma completes ide_set_inactive sets retry_unit to -1.
After that ide_flush_cache runs and fails thanks to blkdebug.
ide_flush_cb calls ide_handle_rw_error which asserts that s->retry_unit
== s->unit. But s->retry_unit is still -1 after previous DMA completion
and flush does not use anything related to retry.
This patch restricts retry unit assertion only to ops that actually use
retry logic.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id:
1468870792-7411-3-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Evgeny Yakovlev [Mon, 18 Jul 2016 19:39:49 +0000 (22:39 +0300)]
ide: refactor retry_unit set and clear into separate function
Code to set and clear state associated with retry in moved into
ide_set_retry and ide_clear_retry to make adding retry setups easier.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id:
1468870792-7411-2-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Lluís Vilanova [Mon, 11 Jul 2016 10:53:57 +0000 (12:53 +0200)]
trace: Add QAPI/QMP interfaces to query and control per-vCPU tracing state
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Lluís Vilanova [Mon, 11 Jul 2016 10:53:51 +0000 (12:53 +0200)]
trace: Allow event name pattern in "info trace-events"
Homogenizes the command capabilities with QMP.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Lluís Vilanova [Mon, 11 Jul 2016 10:53:46 +0000 (12:53 +0200)]
trace: Conditionally trace events based on their per-vCPU state
Events with the 'vcpu' property are conditionally emitted according to
their per-vCPU state. Other events are emitted normally based on their
global tracing state.
Note that the per-vCPU condition check applies to all tracing backends.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Lluís Vilanova [Mon, 11 Jul 2016 10:53:41 +0000 (12:53 +0200)]
trace: Add per-vCPU tracing states for events with the 'vcpu' property
Each vCPU gets a 'trace_dstate' bitmap to control the per-vCPU dynamic
tracing state of events with the 'vcpu' property.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Lluís Vilanova [Mon, 11 Jul 2016 10:53:35 +0000 (12:53 +0200)]
trace: Cosmetic changes on fast-path tracing
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Lluís Vilanova [Mon, 11 Jul 2016 10:53:30 +0000 (12:53 +0200)]
disas: Remove unused macro '_'
Eliminates a future compilation error when UI code includes the tracing
headers (indirectly pulling "disas/bfd.h" through "qom/cpu.h") and
GLib's i18n '_' macro.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Lluís Vilanova [Mon, 11 Jul 2016 10:53:24 +0000 (12:53 +0200)]
trace: Identify events with the 'vcpu' property
A new event attribute 'cpu_id' is added to have a separate ID
space ('TRACE_VCPU_*') for all events with the 'vcpu' property.
These are later used to identify which events are enabled on each vCPU.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Lluís Vilanova [Fri, 15 Jul 2016 17:08:43 +0000 (19:08 +0200)]
trace: [bsd-user] Commandline arguments to control tracing
[Changed const char *trace_file to char *trace_file since it's a
heap-allocated string that needs to be freed. This type is also
returned by trace_opt_parse() and used in vl.c.
Also fixed coding style on for(;;) and else statement as suggested by
Eric Blake <eblake@redhat.com> since the patch modifies these lines or
close enough.
--Stefan]
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id:
146860252322.30668.
18276041739086338328.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Lluís Vilanova [Fri, 15 Jul 2016 17:08:38 +0000 (19:08 +0200)]
trace: [linux-user] Commandline arguments to control tracing
[Changed const char *trace_file to char *trace_file since it's a
heap-allocated string that needs to be freed. This type is also
returned by trace_opt_parse() and used in vl.c.
--Stefan]
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id:
146860251784.30668.
17339867835129075077.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Peter Maydell [Mon, 18 Jul 2016 17:13:01 +0000 (18:13 +0100)]
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
# gpg: Signature made Mon 18 Jul 2016 17:58:27 BST
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
MAINTAINERS: Add include/block/aio.h to block I/O path section
virtio-blk: dataplane cleanup
checkpatch: consider git extended headers valid patches
aio-posix: remove useless parameter
linux-aio: prevent submitting more than MAX_EVENTS
aio_ctx_check: follow CODING_STYLE
linux-aio: share one LinuxAioState within an AioContext
spec/parallels: fix a mistake
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alex Williamson [Mon, 18 Jul 2016 16:55:17 +0000 (10:55 -0600)]
vfio/pci: Hide ARI capability
QEMU supports ARI on downstream ports and assigned devices may support
ARI in their extended capabilities. The endpoint ARI capability
specifies the next function, such that the OS doesn't need to walk
each possible function, however this next function is relative to the
host, not the guest. This leads to device discovery issues when we
combine separate functions into virtual multi-function packages in a
guest. For example, SR-IOV VFs are not enumerated by simply probing
the function address space, therefore the ARI next-function field is
zero. When we combine multiple VFs together as a multi-function
device in the guest, the guest OS identifies ARI is enabled, relies on
this next-function field, and stops looking for additional function
after the first is found.
Long term we should expose the ARI capability to the guest to enable
configurations with more than 8 functions per slot, but this requires
additional QEMU PCI infrastructure to manage the next-function field
for multiple, otherwise independent devices. In the short term,
hiding this capability allows equivalent functionality to what we
currently have on non-express chipsets.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Pranith Kumar [Mon, 27 Jun 2016 18:13:22 +0000 (14:13 -0400)]
.travis.yml: Disable IRC build status updates from forks
We want the travis build bot to post notifications on IRC only for the
master qemu repository and not the various forks/branches of
others. Currently there is no direct option to restrict the updates to
one repository. This is being worked upon by the developers and
tracked in https://github.com/travis-ci/travis-ci/issues/1094.
Until such time, we can use the workaround as posted in
ref. https://github.com/facebook/flow/pull/1822.
This basically creates an ecrypted string which decrypts to qemu IRC
channel only on "qemu/qemu" repo and not on the forks. This enables
the build bot to notify the IRC only for the main repo.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Fam Zheng [Mon, 18 Jul 2016 07:19:47 +0000 (15:19 +0800)]
MAINTAINERS: Add include/block/aio.h to block I/O path section
This file is actually the header for async.c and aio-*.c., so add it to
the same section.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id:
1468826387-10473-1-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Cao jin [Mon, 18 Jul 2016 04:05:49 +0000 (12:05 +0800)]
virtio-blk: dataplane cleanup
No need duplicate the judgment, there is one in function entry.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id:
1468814749-14510-1-git-send-email-caoj.fnst@cn.fujitsu.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Fri, 15 Jul 2016 09:46:54 +0000 (10:46 +0100)]
checkpatch: consider git extended headers valid patches
Renames look like this with git-diff(1) when diff.renames = true is set:
diff --git a/a b/b
similarity index 100%
rename from a
rename to b
This raises the "Does not appear to be a unified-diff format patch"
error because checkpatch.pl only considers a diff valid if it contains
at least one "@@" hunk.
This patch accepts renames and copies too so that checkpatch.pl exits
successfully when a diff only renames/copies files. The git diff
extended header format is described on the git-diff(1) man page.
Reported-by: Colin Lord <clord@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id:
1468576014-28788-1-git-send-email-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Cao jin [Fri, 15 Jul 2016 10:28:44 +0000 (18:28 +0800)]
aio-posix: remove useless parameter
Parameter **errp of aio_context_setup() is useless, remove it
and clean up the related code.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Fam Zheng <famz@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id:
1468578524-23433-1-git-send-email-caoj.fnst@cn.fujitsu.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Roman Pen [Wed, 13 Jul 2016 13:03:24 +0000 (15:03 +0200)]
linux-aio: prevent submitting more than MAX_EVENTS
Invoking io_setup(MAX_EVENTS) we ask kernel to create ring buffer for us
with specified number of events. But kernel ring buffer allocation logic
is a bit tricky (ring buffer is page size aligned + some percpu allocation
are required) so eventually more than requested events number is allocated.
From a userspace side we have to follow the convention and should not try
to io_submit() more or logic, which consumes completed events, should be
changed accordingly. The pitfall is in the following sequence:
MAX_EVENTS = 128
io_setup(MAX_EVENTS)
io_submit(MAX_EVENTS)
io_submit(MAX_EVENTS)
/* now 256 events are in-flight */
io_getevents(MAX_EVENTS) = 128
/* we can handle only 128 events at once, to be sure
* that nothing is pended the io_getevents(MAX_EVENTS)
* call must be invoked once more or hang will happen. */
To prevent the hang or reiteration of io_getevents() call this patch
restricts the number of in-flights, which is now limited to MAX_EVENTS.
Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
1468415004-31755-1-git-send-email-roman.penyaev@profitbricks.com
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: qemu-devel@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Cao jin [Thu, 14 Jul 2016 13:10:43 +0000 (21:10 +0800)]
aio_ctx_check: follow CODING_STYLE
replace tab with spaces
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Message-id:
1468501843-14927-1-git-send-email-caoj.fnst@cn.fujitsu.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Paolo Bonzini [Mon, 4 Jul 2016 16:33:20 +0000 (18:33 +0200)]
linux-aio: share one LinuxAioState within an AioContext
This has better performance because it executes fewer system calls
and does not use a bottom half per disk.
Originally proposed by Ming Lei.
[Changed #include "raw-aio.h" to "block/raw-aio.h" in win32-aio.c to fix
build error as reported by Peter Maydell <peter.maydell@linaro.org>.
--Stefan]
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id:
1467650000-51385-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
squash! linux-aio: share one LinuxAioState within an AioContext
Vladimir Sementsov-Ogievskiy [Thu, 30 Jun 2016 08:19:30 +0000 (11:19 +0300)]
spec/parallels: fix a mistake
We have only one flag for now - Empty Image flag. The patch fixes unused
bits specification and marks bit 1 as usused.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Peter Maydell [Mon, 18 Jul 2016 10:24:15 +0000 (11:24 +0100)]
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.7-
20160718' into staging
ppc patch queue 2016-07-18
Here's what ought to be the final ppc pull request before the 2.7 hard
freeze. This set contains a rework of the DBDMA device for Mac
platforms, and some assorted cleanups and bugfixes.
# gpg: Signature made Mon 18 Jul 2016 05:35:27 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.7-
20160718:
ppc: Yet another fix for the huge page support detection mechanism
target-ppc: fix left shift overflow in hpte_page_shift
ppc/mmu-hash64: Remove duplicated #include statement
ppc: abort if compat property contains an unknown value
spapr: Ensure CPU cores are added contiguously and removed in LIFO order
vfio/spapr: Remove stale ioctl() call
ppc: Fix support for odd MSR combinations
dbdma: reset io->processing flag for unassigned DBDMA channel rw accesses
dbdma: set FLUSH bit upon reception of flush command for unassigned DBDMA channels
dbdma: fix load_word/store_word value endianness
dbdma: fix endian of DBDMA_CMDPTR_LO during branch
dbdma: add per-channel debugging enabled via DEBUG_DBDMA_CHANMASK
dbdma: always define DBDMA_DPRINTF and enable debug with DEBUG_DBDMA
spapr: fix core unplug crash
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Jason Wang [Tue, 12 Jul 2016 08:28:23 +0000 (16:28 +0800)]
e1000e: fix building without CONFIG_VMXNET3_PCI
e1000e needs net_tx_pkt.o and net_rx_pkt.o too.
Cc: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Cc: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Jiri Pirko [Mon, 11 Jul 2016 07:49:42 +0000 (09:49 +0200)]
MAINTAINERS: release Scott from being a rocker maintainer
As requested by Scott, removing him.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Paolo Bonzini [Fri, 15 Jul 2016 08:56:07 +0000 (10:56 +0200)]
tap: fix memory leak on failure to create a multiqueue tap device
Reported by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Paolo Bonzini [Fri, 15 Jul 2016 08:41:47 +0000 (10:41 +0200)]
net: fix incorrect argument to iov_to_buf
Coverity reports a "suspicious sizeof" which is indeed wrong.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Paolo Bonzini [Fri, 15 Jul 2016 08:43:32 +0000 (10:43 +0200)]
net: fix incorrect access to pointer
This is not dereferencing the pointer, and instead checking only
the value of the pointer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Paolo Bonzini [Fri, 15 Jul 2016 08:44:38 +0000 (10:44 +0200)]
e1000e: fix incorrect access to pointer
This is not dereferencing the pointer, and instead checking only
the value of the pointer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Thomas Huth [Fri, 15 Jul 2016 08:10:25 +0000 (10:10 +0200)]
ppc: Yet another fix for the huge page support detection mechanism
Commit
86b50f2e1bef ("Disable huge page support if it is not available
for main RAM") already made sure that huge page support is not announced
to the guest if the normal RAM of non-NUMA configurations is not backed
by a huge page filesystem. However, there is one more case that can go
wrong: NUMA is enabled, but the RAM of the NUMA nodes are not configured
with huge page support (and only the memory of a DIMM is configured with
it). When QEMU is started with the following command line for example,
the Linux guest currently crashes because it is trying to use huge pages
on a memory region that does not support huge pages:
qemu-system-ppc64 -enable-kvm ... -m 1G,slots=4,maxmem=32G -object \
memory-backend-file,policy=default,mem-path=/hugepages,size=1G,id=mem-mem1 \
-device pc-dimm,id=dimm-mem1,memdev=mem-mem1 -smp 2 \
-numa node,nodeid=0 -numa node,nodeid=1
To fix this issue, we've got to make sure to disable huge page support,
too, when there is a NUMA node that is not using a memory backend with
huge page support.
Fixes:
86b50f2e1befc33407bdfeb6f45f7b0d2439a740
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Paolo Bonzini [Fri, 15 Jul 2016 15:22:10 +0000 (17:22 +0200)]
target-ppc: fix left shift overflow in hpte_page_shift
ps->pte_enc is a 32-bit value, which is shifted left and then compared
to a 64-bit value. It needs a cast before the shift.
Reported by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Thomas Huth [Thu, 14 Jul 2016 08:14:18 +0000 (10:14 +0200)]
ppc/mmu-hash64: Remove duplicated #include statement
No need to include error-report.h twice here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Wed, 13 Jul 2016 10:00:17 +0000 (12:00 +0200)]
ppc: abort if compat property contains an unknown value
It is not possible to set the compat property to an unknown value with
powerpc_set_compat(). Something must have gone terribly wrong in QEMU,
if we detect an "Internal error" in powerpc_get_compat(). Let's abort then.
This patch also drops the "max_compat ? *max_compat : -1" construct. It is
useless since max_compat is dereferenced a few lines above.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Bharata B Rao [Wed, 13 Jul 2016 06:50:20 +0000 (12:20 +0530)]
spapr: Ensure CPU cores are added contiguously and removed in LIFO order
If CPU core addition or removal is allowed in random order leading to
holes in the core id range (and hence in the cpu_index range), migration
can fail as migration with holes in cpu_index range isn't yet handled
correctly.
Prevent this situation by enforcing the addition in contiguous order
and removal in LIFO order so that we never end up with holes in
cpu_index range.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
David Gibson [Tue, 12 Jul 2016 06:54:03 +0000 (16:54 +1000)]
vfio/spapr: Remove stale ioctl() call
This ioctl() call to VFIO_IOMMU_SPAPR_TCE_REMOVE was left over from an
earlier version of the code and has since been folded into
vfio_spapr_remove_window().
It wasn't caught because although the argument structure has been removed,
the libc function remove() means this didn't trigger a compile failure.
The ioctl() was also almost certain to fail silently and harmlessly with
the bogus argument, so this wasn't caught in testing.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Benjamin Herrenschmidt [Sat, 9 Jul 2016 03:41:31 +0000 (13:41 +1000)]
ppc: Fix support for odd MSR combinations
MacOS uses an architecturally illegal MSR combination that
seems nonetheless supported by 32-bit processors, which is
to have MSR[PR]=1 and one or more of MSR[DR/IR/EE]=0.
This adds support for it. To work properly we need to also
properly include support for PR=1,{I,D}R=0 to the MMU index
used by the qemu TLB.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Sun, 10 Jul 2016 18:08:58 +0000 (19:08 +0100)]
dbdma: reset io->processing flag for unassigned DBDMA channel rw accesses
Otherwise MacOS 9 hangs upon shutdown.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Sun, 10 Jul 2016 18:08:57 +0000 (19:08 +0100)]
dbdma: set FLUSH bit upon reception of flush command for unassigned DBDMA channels
This fixes MacOS 9 whereby it continually flushes and polls the status bits
until they are set to indicate a successful flush.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Sun, 10 Jul 2016 18:08:56 +0000 (19:08 +0100)]
dbdma: fix load_word/store_word value endianness
The values to read/write to/from physical memory are copied directly to the
physical address with no endian swapping required.
Also add some extra information to debugging output while we are here.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Sun, 10 Jul 2016 18:08:55 +0000 (19:08 +0100)]
dbdma: fix endian of DBDMA_CMDPTR_LO during branch
The current DBDMA command is stored in little-endian format, so make sure
we convert it to match our CPU when updating the DBDMA_CMDPTR_LO register.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Sun, 10 Jul 2016 18:08:54 +0000 (19:08 +0100)]
dbdma: add per-channel debugging enabled via DEBUG_DBDMA_CHANMASK
By default large amounts of DBDMA debugging are produced when often it is just
1 or 2 channels that are of interest. Introduce DEBUG_DBDMA_CHANMASK to allow
the developer to select the channels of interest at compile time, and then
further add the extra channel information to each debug statement where
possible.
Also clearly mark the start/end of DBDMA_run_bh to allow tracking the bottom
half execution.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Sun, 10 Jul 2016 18:08:53 +0000 (19:08 +0100)]
dbdma: always define DBDMA_DPRINTF and enable debug with DEBUG_DBDMA
Enabling DBDMA_DPRINTF unconditionally ensures that any errors in debug
statements are picked up immediately.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Fri, 8 Jul 2016 13:12:07 +0000 (15:12 +0200)]
spapr: fix core unplug crash
If the host has 8 threads/core and the guest is started with:
-smp cores=1,threads=4,maxcpus=12
It is possible to crash QEMU by doing:
(qemu) device_add host-spapr-cpu-core,core-id=16,id=foo
(qemu) device_del foo
Segmentation fault
This happens because spapr_core_unplug() assumes cpu_dt_id == core_id.
As long as cpu_dt_id is derived from the non-table cpu_index, this is
only true when you plug cores with contiguous ids.
It is safer to be consistent: the DR connector was created with an
index that is immediately written to cc->core_id, and spapr_core_plug()
also relies on cc->core_id.
Let's use it also in spapr_core_unplug().
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Sergey Fedorov [Fri, 15 Jul 2016 19:31:23 +0000 (22:31 +0300)]
cpu-exec: Move down some declarations in cpu_exec()
This will fix a compiler warning with -Wclobbered:
http://lists.nongnu.org/archive/html/qemu-devel/2016-07/msg03347.html
Reported-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-Id: <
20160715193123.28113-1-sergey.fedorov@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Lieven [Fri, 15 Jul 2016 10:03:50 +0000 (12:03 +0200)]
exec: avoid realloc in phys_map_node_reserve
this is the first step in reducing the brk heap fragmentation
created by the map->nodes memory allocation. Since the introduction
of RCU the freeing of the PhysPageMaps is delayed so that sometimes
several hundred are allocated at the same time.
Even worse the memory for map->nodes is allocated and shortly
afterwards reallocated. Since the number of nodes it grows
to in the end is the same for all PhysPageMaps remember this value
and at least avoid the reallocation.
The large number of simultaneous allocations (about 450 x 70kB in
my configuration) has to be addressed later.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <
1468577030-21097-1-git-send-email-pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stefan Hajnoczi [Fri, 15 Jul 2016 09:46:54 +0000 (10:46 +0100)]
checkpatch: consider git extended headers valid patches
Renames look like this with git-diff(1) when diff.renames = true is set:
diff --git a/a b/b
similarity index 100%
rename from a
rename to b
This raises the "Does not appear to be a unified-diff format patch"
error because checkpatch.pl only considers a diff valid if it contains
at least one "@@" hunk.
This patch accepts renames and copies too so that checkpatch.pl exits
successfully when a diff only renames/copies files. The git diff
extended header format is described on the git-diff(1) man page.
Reported-by: Colin Lord <clord@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <
1468576014-28788-1-git-send-email-stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 15 Jul 2016 16:42:53 +0000 (18:42 +0200)]
megasas: remove useless check for cmd->frame
megasas_enqueue_frame always returns with non-NULL cmd->frame.
Remove the "else" part as it is dead code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 15 Jul 2016 16:27:40 +0000 (18:27 +0200)]
compiler: never omit assertions if using a static analysis tool
Assertions help both Coverity and the clang static analyzer avoid
false positives, but on the other hand both are confused when
the condition is compiled as (void)(x != FOO). Always expand
assertion macros when using Coverity or clang, through a new
QEMU_STATIC_ANALYSIS preprocessor symbol.
This fixes a couple false positives in TCG.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Antonio Borneo [Wed, 6 Apr 2016 20:04:14 +0000 (22:04 +0200)]
hw/i386: add device tree support
With "-dtb" on command-line:
- append the device tree blob to the kernel image;
- pass the blob's pointer to the kernel through setup_data, as
requested by upstream kernel commit
da6b737b9ab7 ("x86: Add
device tree support").
The device tree blob is passed as-is to the guest; none of its
fields is modified nor updated. This is not an issue; the kernel
commit above uses the device tree only as an extension to the
traditional kernel configuration.
To: "Michael S. Tsirkin" <mst@redhat.com>
To: Paolo Bonzini <pbonzini@redhat.com>
To: Richard Henderson <rth@twiddle.net>
To: Eduardo Habkost <ehabkost@redhat.com>
Cc: qemu-devel@nongnu.org
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Message-Id: <
1459973054-2777-1-git-send-email-borneo.antonio@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Md Haris Iqbal [Tue, 5 Apr 2016 13:09:03 +0000 (18:39 +0530)]
Changed malloc to g_malloc, free to g_free in bsd-user/qemu.h
Signed-off-by: Md Haris Iqbal <haris.phnx@gmail.com>
Message-Id: <
1459861743-4514-1-git-send-email-haris.phnx@gmail.com>
Reviewed-by: Sean Bruno <sbruno@freebsd.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wei Jiangang [Thu, 7 Apr 2016 02:46:24 +0000 (10:46 +0800)]
use g_path_get_dirname instead of dirname
Use g_path_get_basename to get the directory components of
a file name, and free its return when no longer needed.
Signed-off-by: Wei Jiangang <weijg.fnst@cn.fujitsu.com>
Message-Id: <
1459997185-15669-3-git-send-email-weijg.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Maydell [Fri, 15 Jul 2016 15:56:08 +0000 (16:56 +0100)]
Merge remote-tracking branch 'remotes/mcayland/tags/qemu-openbios-signed' into staging
Update OpenBIOS images
# gpg: Signature made Fri 15 Jul 2016 15:22:36 BST
# gpg: using RSA key 0x5BC2C56FAE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* remotes/mcayland/tags/qemu-openbios-signed:
Update OpenBIOS images to
b747b6a built from submodule.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark Cave-Ayland [Fri, 15 Jul 2016 14:14:35 +0000 (15:14 +0100)]
Update OpenBIOS images to
b747b6a built from submodule.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Peter Lieven [Fri, 15 Jul 2016 09:45:11 +0000 (11:45 +0200)]
vnc-tight: fix regression with libxenstore
commit
095497ff added thread local storage for the color counting
palette. Unfortunately, a VncPalette is about 7kB on a x86_64 system.
This memory is reserved from the stack of every thread and it
exhausted the stack space of a libxenstore thread.
Fix this by allocating memory only for the VNC encoding thread.
Fixes:
095497ffc66b7f031ff2a17f1e50f5cb105ce588
Reported-by: Juergen Gross <jgross@suse.com>
Tested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-id:
1468575911-20656-1-git-send-email-pl@kamp.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Herongguang (Stephen) [Tue, 12 Jul 2016 09:31:23 +0000 (17:31 +0800)]
vnc-enc-tight: fix off-by-one bug
In tight_encode_indexed_rect32, buf(or src)’s size is count. In for loop,
the logic is supposed to be that i is an index into src, i should be
incremented when incrementing src.
This is broken when src is incremented but i is not before while loop,
resulting in off-by-one bug in while loop.
Signed-off-by: He Rongguang <herongguang.he@huawei.com>
Message-id:
5784B8EB.
7010008@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 13 Jul 2016 10:21:20 +0000 (12:21 +0200)]
vnc: make sure we finish disconnect
It may happen that vnc connections linger in disconnecting state forever
because VncState happens to be in a state where vnc_update_client()
exists early and never reaches the vnc_disconnect_finish() call at the
bottom of the function. Fix that by doing an additinal check at the
start of the function.
https://bugzilla.redhat.com/show_bug.cgi?id=
1352799
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id:
1468405280-2571-1-git-send-email-kraxel@redhat.com
Peter Maydell [Thu, 14 Jul 2016 16:32:53 +0000 (17:32 +0100)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-
20160714' into staging
target-arm queue:
* add virtio-mmio transport base address to device path
(avoid an assertion failure with multiple virtio-scsi-devices)
* revert hw/ptimer commit
5a50307 which causes regressions on
SPARC guests
* use Neon to accelerate zero-page checking on AArch64 hosts
* set the MPIDR for TCG to match how KVM does it (and fit with
GICv2/GICv3 restrictions on SGI target lists)
* add some missing AArch32 TLBI hypervisor TLB operations
* m25p80: Fix QIOR/DIOR handling for Winbond
* hw/misc: fix typo in Aspeed SCU hw-strap2 property name
* ast2400: pretend DMAs are done for U-boot
* ast2400: some minor code cleanups
# gpg: Signature made Thu 14 Jul 2016 17:21:30 BST
# gpg: using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-
20160714:
ast2400: externalize revision numbers
ast2400: pretend DMAs are done for U-boot
ast2400: replace aspeed_smc_is_implemented()
hw/misc: fix typo in Aspeed SCU hw-strap2 property name
m25p80: Fix QIOR/DIOR handling for Winbond
target-arm: Add missed AArch32 TLBI sytem registers
hw/arm/virt: tcg: adjust MPIDR like KVM
gic: provide defines for v2/v3 targetlist sizes
target-arm: Use Neon for zero checking
Revert "hw/ptimer: Perform counter wrap around if timer already expired"
virtio-mmio: format transport base address in BusClass.get_dev_path
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cédric Le Goater [Thu, 14 Jul 2016 15:51:39 +0000 (16:51 +0100)]
ast2400: externalize revision numbers
AST2400_A0_SILICON_REV is defined twice. Fix this by including the
definition in the header file as well as the routine to check if a
silicon revision is supported. It will useful to reuse in other
controllers.
Let's add also AST2500_A0_SILICON_REV for future use.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id:
1467994016-11678-5-git-send-email-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cédric Le Goater [Thu, 14 Jul 2016 15:51:38 +0000 (16:51 +0100)]
ast2400: pretend DMAs are done for U-boot
U-boot does SPI timing calibration using DMA tranfers. To let the
initialization continue, we fake success by setting the DMA status of
the Interrupt Control Register.
For the moment, DMA support is not required as it is not used in
normal operation.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id:
1467994016-11678-4-git-send-email-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cédric Le Goater [Thu, 14 Jul 2016 15:51:38 +0000 (16:51 +0100)]
ast2400: replace aspeed_smc_is_implemented()
aspeed_smc_is_implemented() filters invalid registers in a peculiar
way. Let's remove it and open code the if conditions. It serves the
same purpose, the aesthetic is better, and new registers can easily be
added.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id:
1467994016-11678-3-git-send-email-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cédric Le Goater [Thu, 14 Jul 2016 15:51:38 +0000 (16:51 +0100)]
hw/misc: fix typo in Aspeed SCU hw-strap2 property name
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id:
1467994016-11678-2-git-send-email-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Marcin Krzeminski [Thu, 14 Jul 2016 15:51:38 +0000 (16:51 +0100)]
m25p80: Fix QIOR/DIOR handling for Winbond
Winbond also support continuous read mode, but as an opposite for other
flash type read mode clock cycles are included to dummy cycles number.
This path add proper handling of read mode byte and update needed
dummy cycles. QPI mode and dummy cycles configuration are not supported.
Signed-off-by: Marcin Krzeminski <marcin.krzeminski@nokia.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id:
1467809036-6986-1-git-send-email-marcin.krzeminski@nokia.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Sergey Sorokin [Thu, 14 Jul 2016 15:51:37 +0000 (16:51 +0100)]
target-arm: Add missed AArch32 TLBI sytem registers
Some PL2 related TLBI system registers are missed in AArch32
implementation. The patch fixes it.
Signed-off-by: Sergey Sorokin <afarallax@yandex.ru>
Message-id:
1468328885-
3217862-1-git-send-email-afarallax@yandex.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Thu, 14 Jul 2016 15:51:37 +0000 (16:51 +0100)]
hw/arm/virt: tcg: adjust MPIDR like KVM
KVM adjusts the MPIDR of guest vcpus based on the architecture of
the host, 32-bit vs. 64-bit, and, for 64-bit, also on the type of
GIC the guest is using. To be consistent and improve SGI efficiency
we make the same adjustments for TCG as 64-bit KVM hosts. We neglect
to add consistency with 32-bit KVM hosts, as that would reduce SGI
efficiency and KVM is expected to change.
As MPIDR is a system register, and thus guest visible, we only make
adjustments for current and later versioned machines.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id:
1467378129-23302-3-git-send-email-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Thu, 14 Jul 2016 15:51:37 +0000 (16:51 +0100)]
gic: provide defines for v2/v3 targetlist sizes
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id:
1467378129-23302-2-git-send-email-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Vijay [Thu, 14 Jul 2016 15:51:36 +0000 (16:51 +0100)]
target-arm: Use Neon for zero checking
Use Neon instructions to perform zero checking of
buffer. This is helps in reducing total migration time.
Use case: Idle VM live migration with 4 VCPUS and 8GB ram
running CentOS 7.
Without Neon, the Total migration time is 3.5 Sec
Migration status: completed
total time: 3560 milliseconds
downtime: 33 milliseconds
setup: 5 milliseconds
transferred ram: 297907 kbytes
throughput: 685.76 mbps
remaining ram: 0 kbytes
total ram:
8519872 kbytes
duplicate:
2062760 pages
skipped: 0 pages
normal: 69808 pages
normal bytes: 279232 kbytes
dirty sync count: 3
With Neon, the total migration time is 2.9 Sec
Migration status: completed
total time: 2960 milliseconds
downtime: 65 milliseconds
setup: 4 milliseconds
transferred ram: 299869 kbytes
throughput: 830.19 mbps
remaining ram: 0 kbytes
total ram:
8519872 kbytes
duplicate:
2064313 pages
skipped: 0 pages
normal: 70294 pages
normal bytes: 281176 kbytes
dirty sync count: 3
Signed-off-by: Vijaya Kumar K <vijayak@cavium.com>
Signed-off-by: Suresh <ksuresh@cavium.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id:
1467190029-694-2-git-send-email-vijayak@cavium.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Dmitry Osipenko [Thu, 14 Jul 2016 15:51:36 +0000 (16:51 +0100)]
Revert "hw/ptimer: Perform counter wrap around if timer already expired"
Software should see timer counter wraparound only after IRQ being triggered.
This fixes regression introduced by the commit
5a50307 ("hw/ptimer: Perform
counter wrap around if timer already expired"), resulting in monotonic timer
jumping backwards on SPARC emulated machine running NetBSD guest OS, as
reported by Mark Cave-Ayland.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id:
20160708132206.2080-1-digetx@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Laszlo Ersek [Thu, 14 Jul 2016 15:51:36 +0000 (16:51 +0100)]
virtio-mmio: format transport base address in BusClass.get_dev_path
At the moment the following QEMU command line triggers an assertion
failure (minimal reproducer by Cole):
qemu-system-aarch64 \
-machine virt-2.6,accel=tcg \
-nodefaults \
-no-user-config \
-nographic -monitor stdio \
-device virtio-scsi-device,id=scsi0 \
-device virtio-scsi-device,id=scsi1 \
-drive file=foo.img,format=raw,if=none,id=d0 \
-device scsi-hd,bus=scsi0.0,drive=d0 \
-drive file=foo.img,format=raw,if=none,id=d1 \
-device scsi-hd,bus=scsi1.0,drive=d1
qemu-system-aarch64: migration/savevm.c:615:
vmstate_register_with_alias_id:
Assertion `!se->compat || se->instance_id == 0' failed.
The reason is that the vmstate sections for the two scsi-hd devices are
not uniquely identifiable by name.
The direct parent buses of the scsi-hd devices -- scsi0.0 and scsi1.0 --
support the BusClass.get_dev_path member function. scsibus_get_dev_path()
formats a device path prefix with the help of its topologically parent
bus, and then appends the chan:id:lun triplet to it. For both scsi-hd
devices, this triplet is 0:0:0.
(Here we use "device path" in the QEMU migration sense, for vmstate
section identification, not in the OFW or UEFI device path senses.)
The virtio-scsi HBA is plugged into the virtio-mmio bus (implemented by
the internal VirtIOMMIOProxy device). This bus class
(TYPE_VIRTIO_MMIO_BUS) inherits, as its get_dev_path() member function,
the virtio_bus_get_dev_path() method from its parent class
(TYPE_VIRTIO_BUS).
virtio_bus_get_dev_path() does not format any kind of device address on
its own; "virtio addresses" are transport-specific. Therefore
virtio_bus_get_dev_path() asks the topologically parent bus of the proxy
object (implementing the specific virtio transport) to format the address
of the proxy object.
(For virtio-pci devices (where the proxy is an instance of VirtIOPCIProxy,
plugged into a PCI bus), this ends up in pcibus_get_dev_path().)
However, VirtIOMMIOProxy is usually (in practice: always) plugged into
"main-system-bus", the singleton TYPE_SYSTEM_BUS object. This BusClass
does not support formatting QEMU vmstate device paths at all (as
SysBusDevice objects can have zero or more IO ports and zero or more MMIO
regions). Hence the formatting request delegated from
virtio_bus_get_dev_path() gets answered with NULL.
The end result is that the two scsi-hd devices end up with the same device
path "0:0:0", which triggers the assert.
We can solve this by recognizing that virtio-mmio transports are
distinguished from each other by their base addresses in MMIO address
space. Implement virtio_mmio_bus_get_dev_path() as follows:
(1) The virtio device whose devpath is to be formatted resides on a
virtio-mmio bus that is implemented by a VirtIOMMIOProxy object. Ask
the parent bus of VirtIOMMIOProxy to format the device path of
VirtIOMMIOProxy, as a path prefix. (This is identical to what
virtio_bus_get_dev_path() does.)
(2) Append the base address of VirtIOMMIOProxy to the device path, such
as:
- virtio-mmio@
000000000a003e00,
- virtio-mmio@
000000000a003c00.
Given that these device paths are placed in the migration stream, step (2)
above, if done unconditionally, would break migration. So make that step
conditional on a new VirtIOMMIOProxy property, which is enabled for 2.7
machine types and later.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Cole Robinson <crobinso@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Kevin Zhao <kevin.zhao@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Tom Hanson <thomas.hanson@linaro.org>
Reported-by: Kevin Zhao <kevin.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-id:
1467739394-28357-1-git-send-email-lersek@redhat.com
Fixes: https://bugs.launchpad.net/qemu/+bug/
1594239
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 14 Jul 2016 15:49:18 +0000 (16:49 +0100)]
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream-fwcfg' into staging
* Updated fw_cfg option ROM to include DMA support
# gpg: Signature made Thu 14 Jul 2016 14:51:06 BST
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream-fwcfg:
Add optionrom compatible with fw_cfg DMA version
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 14 Jul 2016 14:57:28 +0000 (15:57 +0100)]
Merge remote-tracking branch 'remotes/xtensa/tags/
20160714-xtensa' into staging
Xtensa-related fixes:
- fix FLASH interface width for XTFPGA boards.
# gpg: Signature made Thu 14 Jul 2016 12:00:05 BST
# gpg: using RSA key 0x51F9CC91F83FA044
# gpg: Good signature from "Max Filippov <max.filippov@cogentembedded.com>"
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>"
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044
* remotes/xtensa/tags/
20160714-xtensa:
target-xtensa: xtfpga: fix FLASH interface width
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Marc Marí [Mon, 23 May 2016 18:11:33 +0000 (19:11 +0100)]
Add optionrom compatible with fw_cfg DMA version
This optionrom is based on linuxboot.S.
Signed-off-by: Marc Marí <markmb@redhat.com>
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <
1464027093-24073-2-git-send-email-rjones@redhat.com>
[Add -fno-toplevel-reorder, support clang without -m16. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Maydell [Thu, 14 Jul 2016 12:44:06 +0000 (13:44 +0100)]
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* SCSI scanner support
* fixes to qemu-char and net exit
* FreeBSD fixes
* Other small bugfixes
# gpg: Signature made Wed 13 Jul 2016 12:30:11 BST
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
hostmem: detect host backend memory is being used properly
hostmem: fix QEMU crash by 'info memdev'
char: do not use atexit cleanup handler
net: do not use atexit for cleanup
slirp: use exit notifier for slirp_smb_cleanup
tap: use an exit notifier to call down_script
util: Fix MIN_NON_ZERO
qemu-sockets: use qapi_free_SocketAddress in cleanup
disas: avoid including everything in headers compiled from C++
json-streamer: fix double-free on exiting during a parse
main-loop: check return value before using pointer
Use "-s" instead of "--quiet" to resolve non-fatal build error on FreeBSD.
scsi-bus: Use longer sense buffer with scanners
scsi-bus: Add SCSI scanner support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Max Filippov [Wed, 6 Jul 2016 06:31:32 +0000 (09:31 +0300)]
target-xtensa: xtfpga: fix FLASH interface width
FLASH chip on XTFPGA boards is connected with 16-bit-wide interface.
Latest U-Boot can see the difference and does not work correctly with
32-bit-wide interface.
Set FLASH chip 'width' property to 2.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Peter Maydell [Thu, 14 Jul 2016 10:48:46 +0000 (11:48 +0100)]
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Wed 13 Jul 2016 12:46:17 BST
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (34 commits)
iotests: Make 157 actually format-agnostic
vvfat: Fix qcow write target driver specification
hmp: show all of snapshot info on every block dev in output of 'info snapshots'
hmp: use snapshot name to determine whether a snapshot is 'fully available'
qemu-iotests: Test naming of throttling groups
blockdev: Fix regression with the default naming of throttling groups
vmdk: fix metadata write regression
Improve block job rate limiting for small bandwidth values
qcow2: Fix qcow2_get_cluster_offset()
qemu-io: Use correct range limitations
qcow2: Avoid making the L1 table too big
qemu-img: Use strerror() for generic resize error
block: Remove BB options from blockdev-add
qemu-iotests: Test setting WCE with qdev
block/qdev: Allow configuring rerror/werror with qdev properties
commit: Fix use of error handling policy
block/qdev: Allow configuring WCE with qdev properties
block/qdev: Allow node name for drive properties
coroutine: move entry argument to qemu_coroutine_create
test-coroutine: prepare for the next patch
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 14 Jul 2016 09:36:27 +0000 (10:36 +0100)]
Merge remote-tracking branch 'remotes/rth/tags/pull-rth-
20160712' into staging
target-sparc improvements, v4
# gpg: Signature made Tue 12 Jul 2016 19:04:33 BST
# gpg: using RSA key 0xAD1270CC4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg: aka "Richard Henderson <rth@redhat.com>"
# gpg: aka "Richard Henderson <rth@twiddle.net>"
# Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC 16A4 AD12 70CC 4DD0 279B
* remotes/rth/tags/pull-rth-
20160712: (24 commits)
target-sparc: Elide duplicate updates to fprs
target-sparc: Use cpu_loop_exit_restore from helper_check_ieee_exceptions
target-sparc: Use cpu_fsr in stfsr
target-sparc: Use explicit writes to cpu_fsr
target-sparc: Remove helper_ldf_asi, helper_stf_asi
target-sparc: Directly implement block and short ldf/stf asis
target-sparc: Directly implement easy ldf/stf asis
target-sparc: Pass TCGMemOp constants to helper_ld/st_asi
target-sparc: Fix obvious error in ASI_M_BFILL
target-sparc: Directly implement easy ldd/std asis
target-sparc: Introduce gen_check_align
target-sparc: Use QT0 to return results from ldda
target-sparc: Directly implement easy ld/st asis
target-sparc: Use defines from asi.h
target-sparc: Add UA2005 defines to asi.h
target-sparc: Import linux/arch/sparc/include/uapi/asm/asi.h
target-sparc: Pass TCGMemOp to gen_ld/st_asi
target-sparc: Introduce get_asi
target-sparc: Store %asi in TB flags
target-sparc: Unify asi handling between 32 and 64-bit
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Kevin Wolf [Wed, 13 Jul 2016 11:45:55 +0000 (13:45 +0200)]
Merge remote-tracking branch 'mreitz/tags/pull-block-for-kevin-2016-07-13' into queue-block
Block patches (v2) for the block queue.
# gpg: Signature made Wed Jul 13 13:41:53 2016 CEST
# gpg: using RSA key 0x3BB14202E838ACAD
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
# Subkey fingerprint: 58B3 81CE 2DC8 9CF9 9730 EE64 3BB1 4202 E838 ACAD
* mreitz/tags/pull-block-for-kevin-2016-07-13:
iotests: Make 157 actually format-agnostic
vvfat: Fix qcow write target driver specification
hmp: show all of snapshot info on every block dev in output of 'info snapshots'
hmp: use snapshot name to determine whether a snapshot is 'fully available'
qemu-iotests: Test naming of throttling groups
blockdev: Fix regression with the default naming of throttling groups
vmdk: fix metadata write regression
Improve block job rate limiting for small bandwidth values
qcow2: Fix qcow2_get_cluster_offset()
qemu-io: Use correct range limitations
qcow2: Avoid making the L1 table too big
qemu-img: Use strerror() for generic resize error
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Mon, 11 Jul 2016 13:22:46 +0000 (15:22 +0200)]
iotests: Make 157 actually format-agnostic
iotest 157 pretends not to care about the image format used, but in fact
it does due to the format name not being filtered in its output. This
patch adds filtering and changes the reference output accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id:
20160711132246.3152-1-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Mon, 11 Jul 2016 13:54:52 +0000 (15:54 +0200)]
vvfat: Fix qcow write target driver specification
First, bdrv_open_child() expects all options for the child to be
prefixed by the child's name (and a separating dot). Second,
bdrv_open_child() does not take ownership of the QDict passed to it but
only extracts all options for the child, so if a QDict is created for
the sole purpose of passing it to bdrv_open_child(), it needs to be
freed afterwards.
This patch makes vvfat adhere to both of these rules.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id:
20160711135452.11304-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Lin Ma [Thu, 7 Jul 2016 05:26:04 +0000 (13:26 +0800)]
hmp: show all of snapshot info on every block dev in output of 'info snapshots'
Currently, the output of 'info snapshots' shows fully available snapshots.
It's opaque, hides some snapshot information to users. It's not convenient
if users want to know more about all of snapshot information on every block
device via monitor.
Follow Kevin's and Max's proposals, The patch makes the output more detailed:
(qemu) info snapshots
List of snapshots present on all disks:
ID TAG VM SIZE DATE VM CLOCK
-- checkpoint-1 165M 2016-05-22 16:58:07 00:02:06.813
List of partial (non-loadable) snapshots on 'drive_image1':
ID TAG VM SIZE DATE VM CLOCK
1 snap1 0 2016-05-22 16:57:31 00:01:30.567
Signed-off-by: Lin Ma <lma@suse.com>
Message-id:
1467869164-26688-3-git-send-email-lma@suse.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Lin Ma [Thu, 7 Jul 2016 05:26:03 +0000 (13:26 +0800)]
hmp: use snapshot name to determine whether a snapshot is 'fully available'
Currently qemu uses snapshot id to determine whether a snapshot is fully
available, It causes incorrect output in some scenario.
For instance:
(qemu) info block
drive_image1 (#block113): /opt/vms/SLES12-SP1-JeOS-x86_64-GM/disk0.qcow2
(qcow2)
Cache mode: writeback
drive_image2 (#block349): /opt/vms/SLES12-SP1-JeOS-x86_64-GM/disk1.qcow2
(qcow2)
Cache mode: writeback
(qemu)
(qemu) info snapshots
There is no snapshot available.
(qemu)
(qemu) snapshot_blkdev_internal drive_image1 snap1
(qemu)
(qemu) info snapshots
There is no suitable snapshot available
(qemu)
(qemu) savevm checkpoint-1
(qemu)
(qemu) info snapshots
ID TAG VM SIZE DATE VM CLOCK
1 snap1 0 2016-05-22 16:57:31 00:01:30.567
(qemu)
$ qemu-img snapshot -l disk0.qcow2
Snapshot list:
ID TAG VM SIZE DATE VM CLOCK
1 snap1 0 2016-05-22 16:57:31 00:01:30.567
2 checkpoint-1 165M 2016-05-22 16:58:07 00:02:06.813
$ qemu-img snapshot -l disk1.qcow2
Snapshot list:
ID TAG VM SIZE DATE VM CLOCK
1 checkpoint-1 0 2016-05-22 16:58:07 00:02:06.813
The patch uses snapshot name instead of snapshot id to determine whether a
snapshot is fully available and uses '--' instead of snapshot id in output
because the snapshot id is not guaranteed to be the same on all images.
For instance:
(qemu) info snapshots
List of snapshots present on all disks:
ID TAG VM SIZE DATE VM CLOCK
-- checkpoint-1 165M 2016-05-22 16:58:07 00:02:06.813
Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id:
1467869164-26688-2-git-send-email-lma@suse.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Alberto Garcia [Fri, 8 Jul 2016 14:03:01 +0000 (17:03 +0300)]
qemu-iotests: Test naming of throttling groups
Throttling groups are named using the 'group' parameter of the
block_set_io_throttle command and the throttling.group command-line
option. If that parameter is unspecified the groups get the name of
the block device.
This patch adds a new test to check the naming of throttling groups.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id:
d87d02823a6b91609509d8bb18e2f5dbd9a6102c.
1467986342.git.berto@igalia.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Alberto Garcia [Fri, 8 Jul 2016 14:03:00 +0000 (17:03 +0300)]
blockdev: Fix regression with the default naming of throttling groups
When I/O limits are set for a block device, the name of the throttling
group is taken from the BlockBackend if the user doesn't specify one.
Commit
efaa7c4eeb7490c6f37f3 moved the naming of the BlockBackend in
blockdev_init() to the end of the function, after I/O limits are set.
The consequence is that the throttling group gets an empty name.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-stable@nongnu.org
Message-id:
af5cd58bd2c4b9f6c57f260d9cfe586b9fb7d34d.
1467986342.git.berto@igalia.com
[mreitz: Use existing "id" variable instead of new "blk_id"]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reda Sallahi [Thu, 7 Jul 2016 08:42:49 +0000 (10:42 +0200)]
vmdk: fix metadata write regression
Commit "
cdeaf1f vmdk: add bdrv_co_write_zeroes" causes a regression on
writes. It writes metadata after every write instead of doing it only once
for each cluster.
vmdk_pwritev() writes metadata whenever m_data is set as valid so this patch
sets m_data as valid only when we have a new cluster which hasn't been
allocated before or a zero grain.
Signed-off-by: Reda Sallahi <fullmanet@gmail.com>
Message-id:
20160707084249.29084-1-fullmanet@gmail.com
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>