From 0606f9b67e8c8727c1369096b3b142dd74dc0a39 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Mon, 9 Dec 2019 15:31:27 +0100 Subject: [PATCH] dt-bindings: display: rockchip-dsi: document external phys Some dw-mipi-dsi instances in Rockchip SoCs use external dphys. In these cases the needs clock will also be generated externally so these don't need the ref-clock as well. changes in v5: - rebased on top of 5.5-rc1 - merged with dsi timing change to prevent ordering conflicts Signed-off-by: Heiko Stuebner Reviewed-by: Rob Herring Link: https://patchwork.freedesktop.org/patch/msgid/20191209143130.4553-4-heiko@sntech.de --- .../devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt index ce4c1fc9116c..1ba9237d0ac0 100644 --- a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt @@ -9,8 +9,9 @@ Required properties: - reg: Represent the physical address range of the controller. - interrupts: Represent the controller's interrupt to the CPU(s). - clocks, clock-names: Phandles to the controller's pll reference - clock(ref) and APB clock(pclk). For RK3399, a phy config clock - (phy_cfg) and a grf clock(grf) are required. As described in [1]. + clock(ref) when using an internal dphy and APB clock(pclk). + For RK3399, a phy config clock (phy_cfg) and a grf clock(grf) + are required. As described in [1]. - rockchip,grf: this soc should set GRF regs to mux vopl/vopb. - ports: contain a port node with endpoint definitions as defined in [2]. For vopb,set the reg = <0> and set the reg = <1> for vopl. @@ -18,6 +19,8 @@ Required properties: - video port 1 for either a panel or subsequent encoder Optional properties: +- phys: from general PHY binding: the phandle for the PHY device. +- phy-names: Should be "dphy" if phys references an external phy. - power-domains: a phandle to mipi dsi power domain node. - resets: list of phandle + reset specifier pairs, as described in [3]. - reset-names: string reset name, must be "apb". -- 2.11.0