From 0667dd5f6c203480f2e8dcb3fc039ef723453a2f Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Tue, 16 Dec 2014 12:21:55 +0200 Subject: [PATCH] spi: qup: Add SPI_CPOL configuration support Device support SPI_CPOL, but driver have missed to add support for this configuration. Signed-off-by: Ivan T. Ivanov Signed-off-by: Mark Brown --- drivers/spi/spi-qup.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c index e7fb5a0d2e8d..ff9cdbdb6672 100644 --- a/drivers/spi/spi-qup.c +++ b/drivers/spi/spi-qup.c @@ -337,7 +337,7 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id) static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer) { struct spi_qup *controller = spi_master_get_devdata(spi->master); - u32 config, iomode, mode; + u32 config, iomode, mode, control; int ret, n_words, w_size; if (spi->mode & SPI_LOOP && xfer->len > controller->in_fifo_sz) { @@ -392,6 +392,15 @@ static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer) writel_relaxed(iomode, controller->base + QUP_IO_M_MODES); + control = readl_relaxed(controller->base + SPI_IO_CONTROL); + + if (spi->mode & SPI_CPOL) + control |= SPI_IO_C_CLK_IDLE_HIGH; + else + control &= ~SPI_IO_C_CLK_IDLE_HIGH; + + writel_relaxed(control, controller->base + SPI_IO_CONTROL); + config = readl_relaxed(controller->base + SPI_CONFIG); if (spi->mode & SPI_LOOP) -- 2.11.0