From 06a574c7ef69bd0bd26ed08e35967acb76622ab3 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 23 Apr 2018 01:40:16 +0000 Subject: [PATCH] arm64: dts: renesas: salvator-common: use audio-graph-card for Sound Current Sound is using simple-audio-card which can't support HDMI. To use HDMI sound, we need to use audio-graph-card. But, one note is that r8a7795 has 2 HDMI ports, but r8a7796 has 1. Because of this mismatch, supporting HDMI on salvator-common is impossible. Thus, this patch exchange sound card to audio-graph-card and keep supporting ak4613 as 1st sound node. r8a7795/r8a7796 salvator-x{s} need to add HDMI sound individually. Signed-off-by: Kuninori Morimoto Tested-by: Nguyen Viet Dung Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/salvator-common.dtsi | 38 ++++++++++++++---------- 1 file changed, 22 insertions(+), 16 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index 1642bc9c8906..9116f4caa3c6 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -93,20 +93,12 @@ regulator-always-on; }; - rsnd_ak4613: sound { - compatible = "simple-audio-card"; + sound_card: sound { + compatible = "audio-graph-card"; - simple-audio-card,format = "left_j"; - simple-audio-card,bitclock-master = <&sndcpu>; - simple-audio-card,frame-master = <&sndcpu>; + label = "rcar-sound"; - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - - sndcodec: simple-audio-card,codec { - sound-dai = <&ak4613>; - }; + dais = <&rsnd_port0>; }; vbus0_usb2: regulator-vbus0-usb2 { @@ -322,6 +314,12 @@ asahi-kasei,out4-single-end; asahi-kasei,out5-single-end; asahi-kasei,out6-single-end; + + port { + ak4613_endpoint: endpoint { + remote-endpoint = <&rsnd_endpoint0>; + }; + }; }; cs2000: clk_multiplier@4f { @@ -581,10 +579,18 @@ <&audio_clk_c>, <&cpg CPG_CORE CPG_AUDIO_CLK_I>; - rcar_sound,dai { - dai0 { - playback = <&ssi0 &src0 &dvc0>; - capture = <&ssi1 &src1 &dvc1>; + ports { + rsnd_port0: port@0 { + rsnd_endpoint0: endpoint { + remote-endpoint = <&ak4613_endpoint>; + + dai-format = "left_j"; + bitclock-master = <&rsnd_endpoint0>; + frame-master = <&rsnd_endpoint0>; + + playback = <&ssi0 &src0 &dvc0>; + capture = <&ssi1 &src1 &dvc1>; + }; }; }; }; -- 2.11.0