From 071408b6dcc1cb29150699621e13b0ddb81e3cf1 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 14 Aug 2012 06:10:01 -0300 Subject: [PATCH] [media] DocBook validation fixes More validation fixes as reported by xmllint. There are still three xmllint errors after this remaining regarding SVG file support. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/Makefile | 2 +- Documentation/DocBook/media/dvb/dvbproperty.xml | 22 +- Documentation/DocBook/media/dvb/frontend.xml | 20 +- Documentation/DocBook/media/v4l/controls.xml | 447 ++++++++++----------- Documentation/DocBook/media/v4l/dev-subdev.xml | 20 +- .../DocBook/media/v4l/pixfmt-srggb10dpcm8.xml | 3 +- Documentation/DocBook/media/v4l/selection-api.xml | 22 +- .../DocBook/media/v4l/vidioc-g-selection.xml | 9 +- Documentation/DocBook/media/v4l/vidioc-qbuf.xml | 2 + .../media/v4l/vidioc-subdev-g-selection.xml | 8 +- 10 files changed, 278 insertions(+), 277 deletions(-) diff --git a/Documentation/DocBook/media/Makefile b/Documentation/DocBook/media/Makefile index 362520992ced..9b7e4c557928 100644 --- a/Documentation/DocBook/media/Makefile +++ b/Documentation/DocBook/media/Makefile @@ -300,7 +300,7 @@ $(MEDIA_OBJ_DIR)/media-entities.tmpl: $(MEDIA_OBJ_DIR)/v4l2.xml @( \ for ident in $(IOCTLS) ; do \ entity=`echo $$ident | tr _ -` ; \ - id=`grep "$$ident" $(MEDIA_OBJ_DIR)/vidioc-*.xml | sed -r s,"^.*/(.*).xml.*","\1",` ; \ + id=`grep "$$ident" $(MEDIA_OBJ_DIR)/vidioc-*.xml $(MEDIA_OBJ_DIR)/media-ioc-*.xml | sed -r s,"^.*/(.*).xml.*","\1",` ; \ echo "$$ident\">" \ >>$@ ; \ diff --git a/Documentation/DocBook/media/dvb/dvbproperty.xml b/Documentation/DocBook/media/dvb/dvbproperty.xml index eddfe6f9a750..d188be963a47 100644 --- a/Documentation/DocBook/media/dvb/dvbproperty.xml +++ b/Documentation/DocBook/media/dvb/dvbproperty.xml @@ -569,33 +569,33 @@ typedef enum fe_delivery_system { <constant>DTV_ATSCMH_RS_FRAME_MODE</constant> RS frame mode. Possible values are: -
+ typedef enum atscmh_rs_frame_mode { ATSCMH_RSFRAME_PRI_ONLY = 0, ATSCMH_RSFRAME_PRI_SEC = 1, } atscmh_rs_frame_mode_t; -
+
<constant>DTV_ATSCMH_RS_FRAME_ENSEMBLE</constant> RS frame ensemble. Possible values are: -
+ typedef enum atscmh_rs_frame_ensemble { ATSCMH_RSFRAME_ENS_PRI = 0, ATSCMH_RSFRAME_ENS_SEC = 1, } atscmh_rs_frame_ensemble_t; -
+
<constant>DTV_ATSCMH_RS_CODE_MODE_PRI</constant> RS code mode (primary). Possible values are: -
+ typedef enum atscmh_rs_code_mode { ATSCMH_RSCODE_211_187 = 0, @@ -603,7 +603,7 @@ typedef enum atscmh_rs_code_mode { ATSCMH_RSCODE_235_187 = 2, } atscmh_rs_code_mode_t; -
+
<constant>DTV_ATSCMH_RS_CODE_MODE_SEC</constant> @@ -621,27 +621,27 @@ typedef enum atscmh_rs_code_mode { <constant>DTV_ATSCMH_SCCC_BLOCK_MODE</constant> Series Concatenated Convolutional Code Block Mode. Possible values are: -
+ typedef enum atscmh_sccc_block_mode { ATSCMH_SCCC_BLK_SEP = 0, ATSCMH_SCCC_BLK_COMB = 1, } atscmh_sccc_block_mode_t; -
+
<constant>DTV_ATSCMH_SCCC_CODE_MODE_A</constant> Series Concatenated Convolutional Code Rate. Possible values are: -
+ typedef enum atscmh_sccc_code_mode { ATSCMH_SCCC_CODE_HLF = 0, ATSCMH_SCCC_CODE_QTR = 1, } atscmh_sccc_code_mode_t; -
+
<constant>DTV_ATSCMH_SCCC_CODE_MODE_B</constant> @@ -817,7 +817,7 @@ typedef enum fe_hierarchy {
<constant>DTV_INTERLEAVING</constant> - Interleaving mode + Interleaving mode enum fe_interleaving { INTERLEAVING_NONE, diff --git a/Documentation/DocBook/media/dvb/frontend.xml b/Documentation/DocBook/media/dvb/frontend.xml index 1ab2e1af81f1..950bdfb4504b 100644 --- a/Documentation/DocBook/media/dvb/frontend.xml +++ b/Documentation/DocBook/media/dvb/frontend.xml @@ -264,7 +264,7 @@ and to add newer delivery systems. FE_GET_PROPERTY/FE_SET_PROPERTY instead, in order to be able to support the newer System Delivery like DVB-S2, DVB-T2, DVB-C2, ISDB, etc. -All kinds of parameters are combined as an union in the FrontendParameters structure: +All kinds of parameters are combined as an union in the FrontendParameters structure: struct dvb_frontend_parameters { uint32_t frequency; /⋆ (absolute) frequency in Hz for QAM/OFDM ⋆/ @@ -277,12 +277,13 @@ struct dvb_frontend_parameters { struct dvb_vsb_parameters vsb; } u; }; - + In the case of QPSK frontends the frequency field specifies the intermediate frequency, i.e. the offset which is effectively added to the local oscillator frequency (LOF) of the LNB. The intermediate frequency has to be specified in units of kHz. For QAM and OFDM frontends the frequency specifies the absolute frequency and is given in Hz. +
QPSK parameters For satellite QPSK frontends you have to use the dvb_qpsk_parameters structure: @@ -347,8 +348,8 @@ itself.
frontend code rate The possible values for the fec_inner field used on -struct dvb_qpsk_parameters and -struct dvb_qam_parameters are: +struct dvb_qpsk_parameters and +struct dvb_qam_parameters are: typedef enum fe_code_rate { @@ -373,9 +374,9 @@ detection.
frontend modulation type for QAM, OFDM and VSB For cable and terrestrial frontends, e. g. for -struct dvb_qpsk_parameters, -struct dvb_qam_parameters and -struct dvb_qam_parameters, +struct dvb_qpsk_parameters, +struct dvb_qam_parameters and +struct dvb_qam_parameters, it needs to specify the quadrature modulation mode which can be one of the following: @@ -396,8 +397,8 @@ it needs to specify the quadrature modulation mode which can be one of the follo } fe_modulation_t;
-Finally, there are several more parameters for OFDM: - +
+More OFDM parameters
Number of carriers per channel @@ -453,6 +454,7 @@ typedef enum fe_hierarchy { } fe_hierarchy_t;
+
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml index 41cd801f0f0b..93b9c6872e53 100644 --- a/Documentation/DocBook/media/v4l/controls.xml +++ b/Documentation/DocBook/media/v4l/controls.xml @@ -3717,232 +3717,231 @@ interface and may change in the future. use case involving camera or individually. -
+ + Flash Control IDs + + + + + + + + + + + ID + Type + Description + + + + + + V4L2_CID_FLASH_CLASS + class + + + The FLASH class descriptor. + + + V4L2_CID_FLASH_LED_MODE + menu + + + Defines the mode of the flash LED, + the high-power white LED attached to the flash controller. + Setting this control may not be possible in presence of + some faults. See V4L2_CID_FLASH_FAULT. + + + + + + V4L2_FLASH_LED_MODE_NONE + Off. + + + V4L2_FLASH_LED_MODE_FLASH + Flash mode. + + + V4L2_FLASH_LED_MODE_TORCH + Torch mode. See V4L2_CID_FLASH_TORCH_INTENSITY. + + + + + + V4L2_CID_FLASH_STROBE_SOURCE + menu + + Defines the source of the flash LED + strobe. + + + + + + V4L2_FLASH_STROBE_SOURCE_SOFTWARE + The flash strobe is triggered by using + the V4L2_CID_FLASH_STROBE control. + + + V4L2_FLASH_STROBE_SOURCE_EXTERNAL + The flash strobe is triggered by an + external source. Typically this is a sensor, + which makes it possible to synchronises the + flash strobe start to exposure start. + + + + + + V4L2_CID_FLASH_STROBE + button + + + Strobe flash. Valid when + V4L2_CID_FLASH_LED_MODE is set to + V4L2_FLASH_LED_MODE_FLASH and V4L2_CID_FLASH_STROBE_SOURCE + is set to V4L2_FLASH_STROBE_SOURCE_SOFTWARE. Setting this + control may not be possible in presence of some faults. + See V4L2_CID_FLASH_FAULT. + + + V4L2_CID_FLASH_STROBE_STOP + button + + Stop flash strobe immediately. + + + V4L2_CID_FLASH_STROBE_STATUS + boolean + + + Strobe status: whether the flash + is strobing at the moment or not. This is a read-only + control. + + + V4L2_CID_FLASH_TIMEOUT + integer + + + Hardware timeout for flash. The + flash strobe is stopped after this period of time has + passed from the start of the strobe. + + + V4L2_CID_FLASH_INTENSITY + integer + + + Intensity of the flash strobe when + the flash LED is in flash mode + (V4L2_FLASH_LED_MODE_FLASH). The unit should be milliamps + (mA) if possible. + + + V4L2_CID_FLASH_TORCH_INTENSITY + integer + + + Intensity of the flash LED in + torch mode (V4L2_FLASH_LED_MODE_TORCH). The unit should be + milliamps (mA) if possible. Setting this control may not + be possible in presence of some faults. See + V4L2_CID_FLASH_FAULT. + + + V4L2_CID_FLASH_INDICATOR_INTENSITY + integer + + + Intensity of the indicator LED. + The indicator LED may be fully independent of the flash + LED. The unit should be microamps (uA) if possible. + + + V4L2_CID_FLASH_FAULT + bitmask + + + Faults related to the flash. The + faults tell about specific problems in the flash chip + itself or the LEDs attached to it. Faults may prevent + further use of some of the flash controls. In particular, + V4L2_CID_FLASH_LED_MODE is set to V4L2_FLASH_LED_MODE_NONE + if the fault affects the flash LED. Exactly which faults + have such an effect is chip dependent. Reading the faults + resets the control and returns the chip to a usable state + if possible. + + + + + + V4L2_FLASH_FAULT_OVER_VOLTAGE + Flash controller voltage to the flash LED + has exceeded the limit specific to the flash + controller. + + + V4L2_FLASH_FAULT_TIMEOUT + The flash strobe was still on when + the timeout set by the user --- + V4L2_CID_FLASH_TIMEOUT control --- has expired. + Not all flash controllers may set this in all + such conditions. + + + V4L2_FLASH_FAULT_OVER_TEMPERATURE + The flash controller has overheated. + + + V4L2_FLASH_FAULT_SHORT_CIRCUIT + The short circuit protection of the flash + controller has been triggered. + + + V4L2_FLASH_FAULT_OVER_CURRENT + Current in the LED power supply has exceeded the limit + specific to the flash controller. + + + V4L2_FLASH_FAULT_INDICATOR + The flash controller has detected a short or open + circuit condition on the indicator LED. + + + + + + V4L2_CID_FLASH_CHARGE + boolean + + Enable or disable charging of the xenon + flash capacitor. + + + V4L2_CID_FLASH_READY + boolean + + + Is the flash ready to strobe? + Xenon flashes require their capacitors charged before + strobing. LED flashes often require a cooldown period + after strobe during which another strobe will not be + possible. This is a read-only control. + + + + +
+
- - - Flash Control IDs - - - - - - - - - - - ID - Type - Description - - - - - - V4L2_CID_FLASH_CLASS - class - - - The FLASH class descriptor. - - - V4L2_CID_FLASH_LED_MODE - menu - - - Defines the mode of the flash LED, - the high-power white LED attached to the flash controller. - Setting this control may not be possible in presence of - some faults. See V4L2_CID_FLASH_FAULT. - - - - - - V4L2_FLASH_LED_MODE_NONE - Off. - - - V4L2_FLASH_LED_MODE_FLASH - Flash mode. - - - V4L2_FLASH_LED_MODE_TORCH - Torch mode. See V4L2_CID_FLASH_TORCH_INTENSITY. - - - - - - V4L2_CID_FLASH_STROBE_SOURCE - menu - - Defines the source of the flash LED - strobe. - - - - - - V4L2_FLASH_STROBE_SOURCE_SOFTWARE - The flash strobe is triggered by using - the V4L2_CID_FLASH_STROBE control. - - - V4L2_FLASH_STROBE_SOURCE_EXTERNAL - The flash strobe is triggered by an - external source. Typically this is a sensor, - which makes it possible to synchronises the - flash strobe start to exposure start. - - - - - - V4L2_CID_FLASH_STROBE - button - - - Strobe flash. Valid when - V4L2_CID_FLASH_LED_MODE is set to - V4L2_FLASH_LED_MODE_FLASH and V4L2_CID_FLASH_STROBE_SOURCE - is set to V4L2_FLASH_STROBE_SOURCE_SOFTWARE. Setting this - control may not be possible in presence of some faults. - See V4L2_CID_FLASH_FAULT. - - - V4L2_CID_FLASH_STROBE_STOP - button - - Stop flash strobe immediately. - - - V4L2_CID_FLASH_STROBE_STATUS - boolean - - - Strobe status: whether the flash - is strobing at the moment or not. This is a read-only - control. - - - V4L2_CID_FLASH_TIMEOUT - integer - - - Hardware timeout for flash. The - flash strobe is stopped after this period of time has - passed from the start of the strobe. - - - V4L2_CID_FLASH_INTENSITY - integer - - - Intensity of the flash strobe when - the flash LED is in flash mode - (V4L2_FLASH_LED_MODE_FLASH). The unit should be milliamps - (mA) if possible. - - - V4L2_CID_FLASH_TORCH_INTENSITY - integer - - - Intensity of the flash LED in - torch mode (V4L2_FLASH_LED_MODE_TORCH). The unit should be - milliamps (mA) if possible. Setting this control may not - be possible in presence of some faults. See - V4L2_CID_FLASH_FAULT. - - - V4L2_CID_FLASH_INDICATOR_INTENSITY - integer - - - Intensity of the indicator LED. - The indicator LED may be fully independent of the flash - LED. The unit should be microamps (uA) if possible. - - - V4L2_CID_FLASH_FAULT - bitmask - - - Faults related to the flash. The - faults tell about specific problems in the flash chip - itself or the LEDs attached to it. Faults may prevent - further use of some of the flash controls. In particular, - V4L2_CID_FLASH_LED_MODE is set to V4L2_FLASH_LED_MODE_NONE - if the fault affects the flash LED. Exactly which faults - have such an effect is chip dependent. Reading the faults - resets the control and returns the chip to a usable state - if possible. - - - - - - V4L2_FLASH_FAULT_OVER_VOLTAGE - Flash controller voltage to the flash LED - has exceeded the limit specific to the flash - controller. - - - V4L2_FLASH_FAULT_TIMEOUT - The flash strobe was still on when - the timeout set by the user --- - V4L2_CID_FLASH_TIMEOUT control --- has expired. - Not all flash controllers may set this in all - such conditions. - - - V4L2_FLASH_FAULT_OVER_TEMPERATURE - The flash controller has overheated. - - - V4L2_FLASH_FAULT_SHORT_CIRCUIT - The short circuit protection of the flash - controller has been triggered. - - - V4L2_FLASH_FAULT_OVER_CURRENT - Current in the LED power supply has exceeded the limit - specific to the flash controller. - - - V4L2_FLASH_FAULT_INDICATOR - The flash controller has detected a short or open - circuit condition on the indicator LED. - - - - - - V4L2_CID_FLASH_CHARGE - boolean - - Enable or disable charging of the xenon - flash capacitor. - - - V4L2_CID_FLASH_READY - boolean - - - Is the flash ready to strobe? - Xenon flashes require their capacitors charged before - strobing. LED flashes often require a cooldown period - after strobe during which another strobe will not be - possible. This is a read-only control. - - - - -
diff --git a/Documentation/DocBook/media/v4l/dev-subdev.xml b/Documentation/DocBook/media/v4l/dev-subdev.xml index a3d9dd093268..d15aaf83f56f 100644 --- a/Documentation/DocBook/media/v4l/dev-subdev.xml +++ b/Documentation/DocBook/media/v4l/dev-subdev.xml @@ -374,29 +374,29 @@ rectangle --- if it is supported by the hardware. - Sink pad format. The user configures the sink pad + Sink pad format. The user configures the sink pad format. This format defines the parameters of the image the - entity receives through the pad for further processing. + entity receives through the pad for further processing. - Sink pad actual crop selection. The sink pad crop - defines the crop performed to the sink pad format. + Sink pad actual crop selection. The sink pad crop + defines the crop performed to the sink pad format. - Sink pad actual compose selection. The size of the + Sink pad actual compose selection. The size of the sink pad compose rectangle defines the scaling ratio compared to the size of the sink pad crop rectangle. The location of the compose rectangle specifies the location of the actual sink compose rectangle in the sink compose bounds - rectangle. + rectangle. - Source pad actual crop selection. Crop on the source + Source pad actual crop selection. Crop on the source pad defines crop performed to the image in the sink compose - bounds rectangle. + bounds rectangle. - Source pad format. The source pad format defines the + Source pad format. The source pad format defines the output pixel format of the subdev, as well as the other parameters with the exception of the image width and height. Width and height are defined by the size of the source pad - actual crop selection. + actual crop selection. Accessing any of the above rectangles not supported by the diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml index 8eace3e2e7d4..2d3f0b1aefe0 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml @@ -22,8 +22,7 @@ with 10 bits per colour compressed to 8 bits each, using DPCM compression. DPCM, differential pulse-code modulation, is lossy. Each colour component consumes 8 bits of memory. In other respects - this format is similar to . + this format is similar to . diff --git a/Documentation/DocBook/media/v4l/selection-api.xml b/Documentation/DocBook/media/v4l/selection-api.xml index e7ed5077834d..4c238ce068b0 100644 --- a/Documentation/DocBook/media/v4l/selection-api.xml +++ b/Documentation/DocBook/media/v4l/selection-api.xml @@ -40,6 +40,7 @@ cropping and composing rectangles have the same size.
Selection targets +
Cropping and composing targets @@ -52,12 +53,12 @@ cropping and composing rectangles have the same size.
+ + See for more + information.
- See for more - information. -
Configuration @@ -216,18 +217,17 @@ composing and cropping operations by setting the appropriate targets. The V4L2 API lacks any support for composing to and cropping from an image inside a memory buffer. The application could configure a capture device to fill only a part of an image by abusing V4L2 API. Cropping a smaller image from a larger -one is achieved by setting the field -&v4l2-pix-format;::bytesperline . Introducing an image offsets -could be done by modifying field &v4l2-buffer;::m:userptr - before calling VIDIOC_QBUF . Those +one is achieved by setting the field +&v4l2-pix-format;::bytesperline. Introducing an image offsets +could be done by modifying field &v4l2-buffer;::m_userptr +before calling VIDIOC_QBUF . Those operations should be avoided because they are not portable (endianness), and do not work for macroblock and Bayer formats and mmap buffers. The selection API deals with configuration of buffer cropping/composing in a clear, intuitive and portable way. Next, with the selection API the concepts of the padded target -and constraints flags are introduced. Finally, &v4l2-crop; - and &v4l2-cropcap; have no reserved -fields. Therefore there is no way to extend their functionality. The new - &v4l2-selection; provides a lot of place for future +and constraints flags are introduced. Finally, &v4l2-crop; and &v4l2-cropcap; +have no reserved fields. Therefore there is no way to extend their functionality. +The new &v4l2-selection; provides a lot of place for future extensions. Driver developers are encouraged to implement only selection API. The former cropping API would be simulated using the new one. diff --git a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml index f76d8a6d9b92..b11ec75e21a1 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml @@ -152,12 +152,10 @@ satisfactory parameters have been negotiated. If constraints flags have to be violated at then ERANGE is returned. The error indicates that there exist no rectangle that satisfies the constraints. - - Selection targets and flags are documented in . -
+
Size adjustments with constraint flags. @@ -170,9 +168,9 @@ exist no rectangle that satisfies the constraints.
-
+ - + struct <structname>v4l2_selection</structname> @@ -208,6 +206,7 @@ exist no rectangle that satisfies the constraints.
+ diff --git a/Documentation/DocBook/media/v4l/vidioc-qbuf.xml b/Documentation/DocBook/media/v4l/vidioc-qbuf.xml index 77ff5be0809d..6a821a65a5ae 100644 --- a/Documentation/DocBook/media/v4l/vidioc-qbuf.xml +++ b/Documentation/DocBook/media/v4l/vidioc-qbuf.xml @@ -155,6 +155,8 @@ or no buffers have been allocated yet, or the userptr or length are invalid. + + EIO VIDIOC_DQBUF failed due to an diff --git a/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml index f33cc814a01d..1ba9e999af3f 100644 --- a/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml +++ b/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml @@ -69,23 +69,22 @@ more information on how each selection target affects the image processing pipeline inside the subdevice. -
+ Types of selection targets There are two types of selection targets: actual and bounds. The actual targets are the targets which configure the hardware. The BOUNDS target will return a rectangle that contain all possible actual rectangles. -
+ -
+ Discovering supported features To discover which targets are supported, the user can perform VIDIOC_SUBDEV_G_SELECTION on them. Any unsupported target will return EINVAL. -
Selection targets and flags are documented in . @@ -132,6 +131,7 @@ + -- 2.11.0