From 085fe1b2e3df91a085d15a0bdc3f03cef6a42dab Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sat, 8 Oct 2016 17:39:10 +0100 Subject: [PATCH] staging:iio:accel:sca3000 add readback of the 3db low pass filter frequency Driving towards getting rid of the non standard mode control interface. Signed-off-by: Jonathan Cameron Reviewed-by: Lars-Peter Clausen --- drivers/staging/iio/accel/sca3000.c | 48 ++++++++++++++++++++++++++++++++++++- 1 file changed, 47 insertions(+), 1 deletion(-) diff --git a/drivers/staging/iio/accel/sca3000.c b/drivers/staging/iio/accel/sca3000.c index 86b0f104b592..8aa6980406f1 100644 --- a/drivers/staging/iio/accel/sca3000.c +++ b/drivers/staging/iio/accel/sca3000.c @@ -191,10 +191,13 @@ struct sca3000_chip_info { unsigned int scale; bool temp_output; int measurement_mode_freq; + int measurement_mode_3db_freq; int option_mode_1; int option_mode_1_freq; + int option_mode_1_3db_freq; int option_mode_2; int option_mode_2_freq; + int option_mode_2_3db_freq; int mot_det_mult_xz[6]; int mot_det_mult_y[7]; }; @@ -219,36 +222,46 @@ static const struct sca3000_chip_info sca3000_spi_chip_info_tbl[] = { .scale = 7357, .temp_output = true, .measurement_mode_freq = 250, + .measurement_mode_3db_freq = 45, .option_mode_1 = SCA3000_OP_MODE_BYPASS, .option_mode_1_freq = 250, + .option_mode_1_3db_freq = 70, .mot_det_mult_xz = {50, 100, 200, 350, 650, 1300}, .mot_det_mult_y = {50, 100, 150, 250, 450, 850, 1750}, }, [e02] = { .scale = 9810, .measurement_mode_freq = 125, + .measurement_mode_3db_freq = 40, .option_mode_1 = SCA3000_OP_MODE_NARROW, .option_mode_1_freq = 63, + .option_mode_1_3db_freq = 11, .mot_det_mult_xz = {100, 150, 300, 550, 1050, 2050}, .mot_det_mult_y = {50, 100, 200, 350, 700, 1350, 2700}, }, [e04] = { .scale = 19620, .measurement_mode_freq = 100, + .measurement_mode_3db_freq = 38, .option_mode_1 = SCA3000_OP_MODE_NARROW, .option_mode_1_freq = 50, + .option_mode_1_3db_freq = 9, .option_mode_2 = SCA3000_OP_MODE_WIDE, .option_mode_2_freq = 400, + .option_mode_2_3db_freq = 70, .mot_det_mult_xz = {200, 300, 600, 1100, 2100, 4100}, .mot_det_mult_y = {100, 200, 400, 7000, 1400, 2700, 54000}, }, [e05] = { .scale = 61313, .measurement_mode_freq = 200, + .measurement_mode_3db_freq = 60, .option_mode_1 = SCA3000_OP_MODE_NARROW, .option_mode_1_freq = 50, + .option_mode_1_3db_freq = 9, .option_mode_2 = SCA3000_OP_MODE_WIDE, .option_mode_2_freq = 400, + .option_mode_2_3db_freq = 75, .mot_det_mult_xz = {600, 900, 1700, 3200, 6100, 11900}, .mot_det_mult_y = {300, 600, 1200, 2000, 4100, 7800, 15600}, }, @@ -578,7 +591,8 @@ static const struct iio_event_spec sca3000_event = { .modified = 1, \ .channel2 = mod, \ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),\ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |\ + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),\ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\ .address = index, \ .scan_index = index, \ @@ -738,6 +752,33 @@ static int write_raw_samp_freq(struct sca3000_state *st, int val) ctrlval); } +static int sca3000_read_3db_freq(struct sca3000_state *st, int *val) +{ + int ret; + + ret = sca3000_read_data_short(st, SCA3000_REG_MODE_ADDR, 1); + if (ret) + return ret; + + /* mask bottom 2 bits - only ones that are relevant */ + st->rx[0] &= SCA3000_REG_MODE_MODE_MASK; + switch (st->rx[0]) { + case SCA3000_REG_MODE_MEAS_MODE_NORMAL: + *val = st->info->measurement_mode_3db_freq; + return IIO_VAL_INT; + case SCA3000_REG_MODE_MEAS_MODE_MOT_DET: + return -EBUSY; + case SCA3000_REG_MODE_MEAS_MODE_OP_1: + *val = st->info->option_mode_1_3db_freq; + return IIO_VAL_INT; + case SCA3000_REG_MODE_MEAS_MODE_OP_2: + *val = st->info->option_mode_2_3db_freq; + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + static int sca3000_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, @@ -795,6 +836,11 @@ static int sca3000_read_raw(struct iio_dev *indio_dev, ret = read_raw_samp_freq(st, val); mutex_unlock(&st->lock); return ret ? ret : IIO_VAL_INT; + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: + mutex_lock(&st->lock); + ret = sca3000_read_3db_freq(st, val); + mutex_unlock(&st->lock); + return ret; default: return -EINVAL; } -- 2.11.0