From 0d65da4a238d3e9fc358b8e1540a193d63f92e20 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 2 Apr 2015 04:06:29 +0200 Subject: [PATCH] net: dsa: mv88e6131: Use common initialization functions Common initialization functions will be needed to enable HW bridging support. Signed-off-by: Guenter Roeck Reviewed-by: Andrew Lunn Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6131.c | 33 +++++---------------------------- 1 file changed, 5 insertions(+), 28 deletions(-) diff --git a/drivers/net/dsa/mv88e6131.c b/drivers/net/dsa/mv88e6131.c index 2540ef0142af..0252d51c0a74 100644 --- a/drivers/net/dsa/mv88e6131.c +++ b/drivers/net/dsa/mv88e6131.c @@ -208,28 +208,6 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p) val |= 0x0100; REG_WRITE(addr, 0x04, val); - /* Port Control 1: disable trunking. Also, if this is the - * CPU port, enable learn messages to be sent to this port. - */ - REG_WRITE(addr, 0x05, dsa_is_cpu_port(ds, p) ? 0x8000 : 0x0000); - - /* Port based VLAN map: give each port its own address - * database, allow the CPU port to talk to each of the 'real' - * ports, and allow each of the 'real' ports to only talk to - * the upstream port. - */ - val = (p & 0xf) << 12; - if (dsa_is_cpu_port(ds, p)) - val |= ds->phys_port_mask; - else - val |= 1 << dsa_upstream_port(ds); - REG_WRITE(addr, 0x06, val); - - /* Default VLAN ID and priority: don't set a default VLAN - * ID, and set the default packet priority to zero. - */ - REG_WRITE(addr, 0x07, 0x0000); - /* Port Control 2: don't force a good FCS, don't use * VLAN-based, source address-based or destination * address-based priority overrides, don't let the switch @@ -278,20 +256,19 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p) */ REG_WRITE(addr, 0x19, 0x7654); - return 0; + return mv88e6xxx_setup_port_common(ds, p); } static int mv88e6131_setup(struct dsa_switch *ds) { - struct mv88e6xxx_priv_state *ps = ds_to_priv(ds); int i; int ret; - mutex_init(&ps->smi_mutex); - mv88e6xxx_ppu_state_init(ds); - mutex_init(&ps->stats_mutex); + ret = mv88e6xxx_setup_common(ds); + if (ret < 0) + return ret; - ps->id = REG_READ(REG_PORT(0), 0x03) & 0xfff0; + mv88e6xxx_ppu_state_init(ds); ret = mv88e6131_switch_reset(ds); if (ret < 0) -- 2.11.0