From 157eb9a0b75e97ad390c6e50c7381b0a0e02fe97 Mon Sep 17 00:00:00 2001 From: Robert Schlabbach Date: Sat, 16 Jun 2018 15:04:22 -0400 Subject: [PATCH] media: em28xx: explicitly disable TS packet filter The em28xx driver never touched the EM2874 register bits that control the transport stream packet filters, leaving them at whatever default the firmware has set. E.g. the Pinnacle 290e disables them by default, while the Hauppauge WinTV dualHD enables discarding NULL packets by default. However, some applications require NULL packets, e.g. to determine the load in DOCSIS segments, so discarding NULL packets is undesired for such applications. This patch simply extends the bit mask when starting or stopping the transport stream packet capture, so that the filter bits are cleared. It has been verified that this makes the Hauppauge WinTV dualHD pass an unfiltered DVB-C stream including NULL packets, which it didn't before. Signed-off-by: Robert Schlabbach Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/em28xx/em28xx-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/usb/em28xx/em28xx-core.c b/drivers/media/usb/em28xx/em28xx-core.c index f70845e7d8c6..45b24776a695 100644 --- a/drivers/media/usb/em28xx/em28xx-core.c +++ b/drivers/media/usb/em28xx/em28xx-core.c @@ -655,12 +655,12 @@ int em28xx_capture_start(struct em28xx *dev, int start) rc = em28xx_write_reg_bits(dev, EM2874_R5F_TS_ENABLE, start ? EM2874_TS1_CAPTURE_ENABLE : 0x00, - EM2874_TS1_CAPTURE_ENABLE); + EM2874_TS1_CAPTURE_ENABLE | EM2874_TS1_FILTER_ENABLE | EM2874_TS1_NULL_DISCARD); else rc = em28xx_write_reg_bits(dev, EM2874_R5F_TS_ENABLE, start ? EM2874_TS2_CAPTURE_ENABLE : 0x00, - EM2874_TS2_CAPTURE_ENABLE); + EM2874_TS2_CAPTURE_ENABLE | EM2874_TS2_FILTER_ENABLE | EM2874_TS2_NULL_DISCARD); } else { /* FIXME: which is the best order? */ /* video registers are sampled by VREF */ -- 2.11.0