From 19a00a9d4c9027b4ce93b7c500da53dcb36ba1b0 Mon Sep 17 00:00:00 2001 From: Brian Masney Date: Mon, 10 Oct 2016 03:19:57 -0400 Subject: [PATCH] staging: iio: isl29018: fix multiline comment syntax Change multiline comments from: /* line1 * line2 * ... */ to /* * line1 * line2 * ... */ Signed-off-by: Brian Masney Signed-off-by: Jonathan Cameron --- drivers/staging/iio/light/isl29018.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/staging/iio/light/isl29018.c b/drivers/staging/iio/light/isl29018.c index 130f2225a6fc..132de8e93bf8 100644 --- a/drivers/staging/iio/light/isl29018.c +++ b/drivers/staging/iio/light/isl29018.c @@ -564,7 +564,8 @@ static int isl29018_chip_init(struct isl29018_chip *chip) return status; } - /* Code added per Intersil Application Note 1534: + /* + * Code added per Intersil Application Note 1534: * When VDD sinks to approximately 1.8V or below, some of * the part's registers may change their state. When VDD * recovers to 2.25V (or greater), the part may thus be in an @@ -591,7 +592,8 @@ static int isl29018_chip_init(struct isl29018_chip *chip) return status; } - /* See Intersil AN1534 comments above. + /* + * See Intersil AN1534 comments above. * "Operating Mode" (COMMAND1) register is reprogrammed when * data is read from the device. */ @@ -773,7 +775,8 @@ static int isl29018_suspend(struct device *dev) mutex_lock(&chip->lock); - /* Since this driver uses only polling commands, we are by default in + /* + * Since this driver uses only polling commands, we are by default in * auto shutdown (ie, power-down) mode. * So we do not have much to do here. */ -- 2.11.0