From 204729fd182bd56180323d9293c31038dde32995 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 15 Apr 2010 17:39:02 -0400 Subject: [PATCH] ath9k_hw: add the config_pci_powersave AR9003 callback Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index e6d4c4c8a3df..0db3475487cb 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -2594,6 +2594,37 @@ enum ath9k_int ath9k_hw_set_interrupts(struct ath_hw *ah, enum ath9k_int ints) } EXPORT_SYMBOL(ath9k_hw_set_interrupts); +/* + * Helper for ASPM support. + * + * Disable PLL when in L0s as well as receiver clock when in L1. + * This power saving option must be enabled through the SerDes. + * + * Programming the SerDes must go through the same 288 bit serial shift + * register as the other analog registers. Hence the 9 writes. + */ +static void ar9003_hw_configpcipowersave(struct ath_hw *ah, + int restore, + int power_off) +{ + if (ah->is_pciexpress != true) + return; + + /* Do not touch SerDes registers */ + if (ah->config.pcie_powersave_enable == 2) + return; + + /* Nothing to do on restore for 11N */ + if (!restore) { + /* set bit 19 to allow forcing of pcie core into L1 state */ + REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA); + + /* Several PCIe massages to ensure proper behaviour */ + if (ah->config.pcie_waen) + REG_WRITE(ah, AR_WA, ah->config.pcie_waen); + } +} + /*******************/ /* Beacon Handling */ /*******************/ @@ -3628,10 +3659,13 @@ static void ar9002_hw_attach_ops(struct ath_hw *ah) static void ar9003_hw_attach_ops(struct ath_hw *ah) { struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah); + struct ath_hw_ops *ops = ath9k_hw_ops(ah); priv_ops->init_mode_regs = ar9003_hw_init_mode_regs; priv_ops->macversion_supported = ar9003_hw_macversion_supported; + ops->config_pci_powersave = ar9003_hw_configpcipowersave; + ar9003_hw_attach_phy_ops(ah); ar9003_hw_attach_calib_ops(ah); ar9003_hw_attach_mac_ops(ah); -- 2.11.0